Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 35 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
new file mode 100644
index 000000000..33da4a6fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -0,0 +1,35 @@
+* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor
+
+https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf
+http://omapworld.com/BMA180_111_1002839.pdf
+http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
+
+Required properties:
+
+  - compatible : should be one of:
+    "bosch,bma023"
+    "bosch,bma150"
+    "bosch,bma180"
+    "bosch,bma250"
+    "bosch,bma254"
+    "bosch,smb380"
+  - reg : the I2C address of the sensor
+  - vdd-supply : regulator phandle connected to the VDD pin
+  - vddio-supply : regulator phandle connected to the VDDIO pin
+
+Optional properties:
+
+  - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
+		flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
+		For the bma250 the first interrupt listed must be the one
+		connected to the INT1 pin, the second (optional) interrupt
+		listed must be the one connected to the INT2 pin.
+
+Example:
+
+bma180@40 {
+	compatible = "bosch,bma180";
+	reg = <0x40>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+};