Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 98 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
new file mode 100644
index 000000000..8c6659ed2
--- /dev/null
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -0,0 +1,98 @@
+* HiSilicon SAS controller
+
+The HiSilicon SAS controller supports SAS/SATA.
+
+Main node required properties:
+  - compatible : value should be as follows:
+	(a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
+	(b) "hisilicon,hip06-sas-v2" for v2 hw in hip06 chipset
+	(c) "hisilicon,hip07-sas-v2" for v2 hw in hip07 chipset
+  - sas-addr : array of 8 bytes for host SAS address
+  - reg : Contains two regions. The first is the address and length of the SAS
+          register. The second is the address and length of CPLD register for
+          SGPIO control. The second is optional, and should be set only when
+          we use a CPLD for directly attached disk LED control.
+  - hisilicon,sas-syscon: phandle of syscon used for sas control
+  - ctrl-reset-reg : offset to controller reset register in ctrl reg
+  - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg
+  - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg
+  - queue-count : number of delivery and completion queues in the controller
+  - phy-count : number of phys accessible by the controller
+  - interrupts : For v1 hw: Interrupts for phys, completion queues, and fatal
+		sources; the interrupts are ordered in 3 groups, as follows:
+			- Phy interrupts
+			- Completion queue interrupts
+			- Fatal interrupts
+		Phy interrupts : Each phy has 3 interrupt sources:
+			- broadcast
+			- phyup
+			- abnormal
+		The phy interrupts are ordered into groups of 3 per phy
+		(broadcast, phyup, and abnormal) in increasing order.
+		Completion queue interrupts : each completion queue has 1
+			interrupt source.
+			The interrupts are ordered in increasing order.
+		Fatal interrupts : the fatal interrupts are ordered as follows:
+			- ECC
+			- AXI bus
+		For v2 hw: Interrupts for phys, Sata, and completion queues;
+		the interrupts are ordered in 3 groups, as follows:
+			- Phy interrupts
+			- Sata interrupts
+			- Completion queue interrupts
+		Phy interrupts : Each controller has 2 phy interrupts:
+			- phy up/down
+			- channel interrupt
+		Sata interrupts : Each phy on the controller has 1 Sata
+			interrupt. The interrupts are ordered in increasing
+			order.
+		Completion queue interrupts : each completion queue has 1
+			interrupt source. The interrupts are ordered in
+			increasing order.
+
+Optional main node properties:
+ - hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the
+			    "am-max-transmissions" limitation.
+ - hisilicon,signal-attenuation : array of 3 32-bit values, containing de-emphasis,
+		preshoot, and boost attenuation readings for the board. They
+		are used to describe the signal attenuation of the board. These
+		values' range is 7600 to 12400, and used to represent -24dB to
+		24dB.
+		The formula is "y = (x-10000)/10000". For example, 10478
+		means 4.78dB.
+
+Example:
+	sas0: sas@c1000000 {
+		compatible = "hisilicon,hip05-sas-v1";
+		sas-addr = [50 01 88 20 16 00 00 0a];
+		reg = <0x0 0xc1000000 0x0 0x10000>;
+		hisilicon,sas-syscon = <&pcie_sas>;
+		ctrl-reset-reg = <0xa60>;
+		ctrl-reset-sts-reg = <0x5a30>;
+		ctrl-clock-ena-reg = <0x338>;
+		queue-count = <32>;
+		phy-count = <8>;
+		dma-coherent;
+		interrupt-parent = <&mbigen_dsa>;
+		interrupts =    <259 4>,<263 4>,<264 4>,/* phy0 */
+				<269 4>,<273 4>,<274 4>,/* phy1 */
+				<279 4>,<283 4>,<284 4>,/* phy2 */
+				<289 4>,<293 4>,<294 4>,/* phy3 */
+				<299 4>,<303 4>,<304 4>,/* phy4 */
+				<309 4>,<313 4>,<314 4>,/* phy5 */
+				<319 4>,<323 4>,<324 4>,/* phy6 */
+				<329 4>,<333 4>,<334 4>,/* phy7 */
+				<336 1>,<337 1>,<338 1>,/* cq0-2 */
+				<339 1>,<340 1>,<341 1>,/* cq3-5 */
+				<342 1>,<343 1>,<344 1>,/* cq6-8 */
+				<345 1>,<346 1>,<347 1>,/* cq9-11 */
+				<348 1>,<349 1>,<350 1>,/* cq12-14 */
+				<351 1>,<352 1>,<353 1>,/* cq15-17 */
+				<354 1>,<355 1>,<356 1>,/* cq18-20 */
+				<357 1>,<358 1>,<359 1>,/* cq21-23 */
+				<360 1>,<361 1>,<362 1>,/* cq24-26 */
+				<363 1>,<364 1>,<365 1>,/* cq27-29 */
+				<366 1>,<367 1>/* cq30-31 */
+				<376 4>,/* fatal ecc */
+				<381 4>;/* fatal axi */
+	};