Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 437 insertions, 0 deletions

diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
new file mode 100644
index 000000000..b9652c69d
--- /dev/null
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+#
+
+menuconfig ARC_PLAT_AXS10X
+	bool "Synopsys ARC AXS10x Software Development Platforms"
+	select DW_APB_ICTL
+	select GPIO_DWAPB
+	select OF_GPIO
+	select HAVE_PCI
+	select GENERIC_IRQ_CHIP
+	select GPIOLIB
+	select AXS101 if ISA_ARCOMPACT
+	select AXS103 if ISA_ARCV2
+	help
+	  Support for the ARC AXS10x Software Development Platforms.
+
+	  The AXS10x Platforms consist of a mainboard with peripherals,
+	  on which several daughter cards can be placed. The daughter cards
+	  typically contain a CPU and memory.
+
+if ARC_PLAT_AXS10X
+
+config AXS101
+	depends on ISA_ARCOMPACT
+	bool "AXS101 with AXC001 CPU Card (ARC 770D/EM6/AS221)"
+	help
+	  This adds support for the 770D/EM6/AS221 CPU Card. Only the ARC
+	  770D is supported in Linux.
+
+	  The AXS101 Platform consists of an AXS10x mainboard with
+	  this daughtercard. Please use the axs101.dts device tree
+	  with this configuration.
+
+config AXS103
+	bool "AXS103 with AXC003 CPU Card (ARC HS38x)"
+	depends on ISA_ARCV2
+	help
+	  This adds support for the HS38x CPU Card.
+
+	  The AXS103 Platform consists of an AXS10x mainboard with
+	  this daughtercard. Please use the axs103.dts device tree
+	  with this configuration.
+
+endif
diff --git a/arch/arc/plat-axs10x/Makefile b/arch/arc/plat-axs10x/Makefile
new file mode 100644
index 000000000..cebe5716e
--- /dev/null
+++ b/arch/arc/plat-axs10x/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+#
+
+obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x.o
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
new file mode 100644
index 000000000..63ea5a606
--- /dev/null
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AXS101/AXS103 Software Development Platform
+ *
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/libfdt.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/io.h>
+#include <asm/mach_desc.h>
+#include <soc/arc/mcip.h>
+
+#define AXS_MB_CGU		0xE0010000
+#define AXS_MB_CREG		0xE0011000
+
+#define CREG_MB_IRQ_MUX		(AXS_MB_CREG + 0x214)
+#define CREG_MB_SW_RESET	(AXS_MB_CREG + 0x220)
+#define CREG_MB_VER		(AXS_MB_CREG + 0x230)
+#define CREG_MB_CONFIG		(AXS_MB_CREG + 0x234)
+
+#define AXC001_CREG		0xF0001000
+#define AXC001_GPIO_INTC	0xF0003000
+
+static void __init axs10x_enable_gpio_intc_wire(void)
+{
+	/*
+	 * Peripherals on CPU Card and Mother Board are wired to cpu intc via
+	 * intermediate DW APB GPIO blocks (mainly for debouncing)
+	 *
+	 *         ---------------------
+	 *        |  snps,arc700-intc |
+	 *        ---------------------
+	 *          | #7          | #15
+	 * -------------------   -------------------
+	 * | snps,dw-apb-gpio |  | snps,dw-apb-gpio |
+	 * -------------------   -------------------
+	 *        | #12                     |
+	 *        |                 [ Debug UART on cpu card ]
+	 *        |
+	 * ------------------------
+	 * | snps,dw-apb-intc (MB)|
+	 * ------------------------
+	 *  |      |       |      |
+	 * [eth] [uart]        [... other perip on Main Board]
+	 *
+	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
+	 * with stacked INTCs. In particular problem happens if its master INTC
+	 * not yet instantiated. See discussion here -
+	 * https://lkml.org/lkml/2015/3/4/755
+	 *
+	 * So setup the first gpio block as a passive pass thru and hide it from
+	 * DT hardware topology - connect MB intc directly to cpu intc
+	 * The GPIO "wire" needs to be init nevertheless (here)
+	 *
+	 * One side adv is that peripheral interrupt handling avoids one nested
+	 * intc ISR hop
+	 */
+#define GPIO_INTEN		(AXC001_GPIO_INTC + 0x30)
+#define GPIO_INTMASK		(AXC001_GPIO_INTC + 0x34)
+#define GPIO_INTTYPE_LEVEL	(AXC001_GPIO_INTC + 0x38)
+#define GPIO_INT_POLARITY	(AXC001_GPIO_INTC + 0x3c)
+#define MB_TO_GPIO_IRQ		12
+
+	iowrite32(~(1 << MB_TO_GPIO_IRQ), (void __iomem *) GPIO_INTMASK);
+	iowrite32(0, (void __iomem *) GPIO_INTTYPE_LEVEL);
+	iowrite32(~0, (void __iomem *) GPIO_INT_POLARITY);
+	iowrite32(1 << MB_TO_GPIO_IRQ, (void __iomem *) GPIO_INTEN);
+}
+
+static void __init axs10x_print_board_ver(unsigned int creg, const char *str)
+{
+	union ver {
+		struct {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+			unsigned int pad:11, y:12, m:4, d:5;
+#else
+			unsigned int d:5, m:4, y:12, pad:11;
+#endif
+		};
+		unsigned int val;
+	} board;
+
+	board.val = ioread32((void __iomem *)creg);
+	pr_info("AXS: %s FPGA Date: %u-%u-%u\n", str, board.d, board.m,
+		board.y);
+}
+
+static void __init axs10x_early_init(void)
+{
+	int mb_rev;
+	char mb[32];
+
+	/* Determine motherboard version */
+	if (ioread32((void __iomem *) CREG_MB_CONFIG) & (1 << 28))
+		mb_rev = 3;	/* HT-3 (rev3.0) */
+	else
+		mb_rev = 2;	/* HT-2 (rev2.0) */
+
+	axs10x_enable_gpio_intc_wire();
+
+	scnprintf(mb, 32, "MainBoard v%d", mb_rev);
+	axs10x_print_board_ver(CREG_MB_VER, mb);
+}
+
+#ifdef CONFIG_AXS101
+
+#define CREG_CPU_ADDR_770	(AXC001_CREG + 0x20)
+#define CREG_CPU_ADDR_TUNN	(AXC001_CREG + 0x60)
+#define CREG_CPU_ADDR_770_UPD	(AXC001_CREG + 0x34)
+#define CREG_CPU_ADDR_TUNN_UPD	(AXC001_CREG + 0x74)
+
+#define CREG_CPU_ARC770_IRQ_MUX	(AXC001_CREG + 0x114)
+#define CREG_CPU_GPIO_UART_MUX	(AXC001_CREG + 0x120)
+
+/*
+ * Set up System Memory Map for ARC cpu / peripherals controllers
+ *
+ * Each AXI master has a 4GB memory map specified as 16 apertures of 256MB, each
+ * of which maps to a corresponding 256MB aperture in Target slave memory map.
+ *
+ * e.g. ARC cpu AXI Master's aperture 8 (0x8000_0000) is mapped to aperture 0
+ * (0x0000_0000) of DDR Port 0 (slave #1)
+ *
+ * Access from cpu to MB controllers such as GMAC is setup using AXI Tunnel:
+ * which has master/slaves on both ends.
+ * e.g. aperture 14 (0xE000_0000) of ARC cpu is mapped to aperture 14
+ * (0xE000_0000) of CPU Card AXI Tunnel slave (slave #3) which is mapped to
+ * MB AXI Tunnel Master, which also has a mem map setup
+ *
+ * In the reverse direction, MB AXI Masters (e.g. GMAC) mem map is setup
+ * to map to MB AXI Tunnel slave which connects to CPU Card AXI Tunnel Master
+ */
+struct aperture {
+	unsigned int slave_sel:4, slave_off:4, pad:24;
+};
+
+/* CPU Card target slaves */
+#define AXC001_SLV_NONE			0
+#define AXC001_SLV_DDR_PORT0		1
+#define AXC001_SLV_SRAM			2
+#define AXC001_SLV_AXI_TUNNEL		3
+#define AXC001_SLV_AXI2APB		6
+#define AXC001_SLV_DDR_PORT1		7
+
+/* MB AXI Target slaves */
+#define AXS_MB_SLV_NONE			0
+#define AXS_MB_SLV_AXI_TUNNEL_CPU	1
+#define AXS_MB_SLV_AXI_TUNNEL_HAPS	2
+#define AXS_MB_SLV_SRAM			3
+#define AXS_MB_SLV_CONTROL		4
+
+/* MB AXI masters */
+#define AXS_MB_MST_TUNNEL_CPU		0
+#define AXS_MB_MST_USB_OHCI		10
+
+/*
+ * memmap for ARC core on CPU Card
+ */
+static const struct aperture axc001_memmap[16] = {
+	{AXC001_SLV_AXI_TUNNEL,		0x0},
+	{AXC001_SLV_AXI_TUNNEL,		0x1},
+	{AXC001_SLV_SRAM,		0x0}, /* 0x2000_0000: Local SRAM */
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_DDR_PORT0,		0x0}, /* 0x8000_0000: DDR   0..256M */
+	{AXC001_SLV_DDR_PORT0,		0x1}, /* 0x9000_0000: DDR 256..512M */
+	{AXC001_SLV_DDR_PORT0,		0x2},
+	{AXC001_SLV_DDR_PORT0,		0x3},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_AXI_TUNNEL,		0xD},
+	{AXC001_SLV_AXI_TUNNEL,		0xE}, /* MB: CREG, CGU... */
+	{AXC001_SLV_AXI2APB,		0x0}, /* CPU Card local CREG, CGU... */
+};
+
+/*
+ * memmap for CPU Card AXI Tunnel Master (for access by MB controllers)
+ * GMAC (MB) -> MB AXI Tunnel slave -> CPU Card AXI Tunnel Master -> DDR
+ */
+static const struct aperture axc001_axi_tunnel_memmap[16] = {
+	{AXC001_SLV_AXI_TUNNEL,		0x0},
+	{AXC001_SLV_AXI_TUNNEL,		0x1},
+	{AXC001_SLV_SRAM,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_DDR_PORT1,		0x0},
+	{AXC001_SLV_DDR_PORT1,		0x1},
+	{AXC001_SLV_DDR_PORT1,		0x2},
+	{AXC001_SLV_DDR_PORT1,		0x3},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_AXI_TUNNEL,		0xD},
+	{AXC001_SLV_AXI_TUNNEL,		0xE},
+	{AXC001_SLV_AXI2APB,		0x0},
+};
+
+/*
+ * memmap for MB AXI Masters
+ * Same mem map for all perip controllers as well as MB AXI Tunnel Master
+ */
+static const struct aperture axs_mb_memmap[16] = {
+	{AXS_MB_SLV_SRAM,		0x0},
+	{AXS_MB_SLV_SRAM,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_AXI_TUNNEL_CPU,	0x8},	/* DDR on CPU Card */
+	{AXS_MB_SLV_AXI_TUNNEL_CPU,	0x9},	/* DDR on CPU Card */
+	{AXS_MB_SLV_AXI_TUNNEL_CPU,	0xA},
+	{AXS_MB_SLV_AXI_TUNNEL_CPU,	0xB},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_AXI_TUNNEL_HAPS,	0xD},
+	{AXS_MB_SLV_CONTROL,		0x0},	/* MB Local CREG, CGU... */
+	{AXS_MB_SLV_AXI_TUNNEL_CPU,	0xF},
+};
+
+static noinline void __init
+axs101_set_memmap(void __iomem *base, const struct aperture map[16])
+{
+	unsigned int slave_select, slave_offset;
+	int i;
+
+	slave_select = slave_offset = 0;
+	for (i = 0; i < 8; i++) {
+		slave_select |= map[i].slave_sel << (i << 2);
+		slave_offset |= map[i].slave_off << (i << 2);
+	}
+
+	iowrite32(slave_select, base + 0x0);	/* SLV0 */
+	iowrite32(slave_offset, base + 0x8);	/* OFFSET0 */
+
+	slave_select = slave_offset = 0;
+	for (i = 0; i < 8; i++) {
+		slave_select |= map[i+8].slave_sel << (i << 2);
+		slave_offset |= map[i+8].slave_off << (i << 2);
+	}
+
+	iowrite32(slave_select, base + 0x4);	/* SLV1 */
+	iowrite32(slave_offset, base + 0xC);	/* OFFSET1 */
+}
+
+static void __init axs101_early_init(void)
+{
+	int i;
+
+	/* ARC 770D memory view */
+	axs101_set_memmap((void __iomem *) CREG_CPU_ADDR_770, axc001_memmap);
+	iowrite32(1, (void __iomem *) CREG_CPU_ADDR_770_UPD);
+
+	/* AXI tunnel memory map (incoming traffic from MB into CPU Card */
+	axs101_set_memmap((void __iomem *) CREG_CPU_ADDR_TUNN,
+			      axc001_axi_tunnel_memmap);
+	iowrite32(1, (void __iomem *) CREG_CPU_ADDR_TUNN_UPD);
+
+	/* MB peripherals memory map */
+	for (i = AXS_MB_MST_TUNNEL_CPU; i <= AXS_MB_MST_USB_OHCI; i++)
+		axs101_set_memmap((void __iomem *) AXS_MB_CREG + (i << 4),
+				      axs_mb_memmap);
+
+	iowrite32(0x3ff, (void __iomem *) AXS_MB_CREG + 0x100); /* Update */
+
+	/* GPIO pins 18 and 19 are used as UART rx and tx, respectively. */
+	iowrite32(0x01, (void __iomem *) CREG_CPU_GPIO_UART_MUX);
+
+	/* Set up the MB interrupt system: mux interrupts to GPIO7) */
+	iowrite32(0x01, (void __iomem *) CREG_MB_IRQ_MUX);
+
+	/* reset ethernet and ULPI interfaces */
+	iowrite32(0x18, (void __iomem *) CREG_MB_SW_RESET);
+
+	/* map GPIO 14:10 to ARC 9:5 (IRQ mux change for MB v2 onwards) */
+	iowrite32(0x52, (void __iomem *) CREG_CPU_ARC770_IRQ_MUX);
+
+	axs10x_early_init();
+}
+
+#endif	/* CONFIG_AXS101 */
+
+#ifdef CONFIG_AXS103
+
+#define AXC003_CREG	0xF0001000
+#define AXC003_MST_AXI_TUNNEL	0
+#define AXC003_MST_HS38		1
+
+#define CREG_CPU_AXI_M0_IRQ_MUX	(AXC003_CREG + 0x440)
+#define CREG_CPU_GPIO_UART_MUX	(AXC003_CREG + 0x480)
+#define CREG_CPU_TUN_IO_CTRL	(AXC003_CREG + 0x494)
+
+
+static void __init axs103_early_init(void)
+{
+#ifdef CONFIG_ARC_MCIP
+	/*
+	 * AXS103 configurations for SMP/QUAD configurations share device tree
+	 * which defaults to 100 MHz. However recent failures of Quad config
+	 * revealed P&R timing violations so clamp it down to safe 50 MHz
+	 * Instead of duplicating defconfig/DT for SMP/QUAD, add a small hack
+	 * of fudging the freq in DT
+	 */
+#define AXS103_QUAD_CORE_CPU_FREQ_HZ	50000000
+
+	unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
+	if (num_cores > 2) {
+		u32 freq;
+		int off = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk");
+		const struct fdt_property *prop;
+
+		prop = fdt_get_property(initial_boot_params, off,
+					"assigned-clock-rates", NULL);
+		freq = be32_to_cpu(*(u32 *)(prop->data));
+
+		/* Patching .dtb in-place with new core clock value */
+		if (freq != AXS103_QUAD_CORE_CPU_FREQ_HZ) {
+			freq = cpu_to_be32(AXS103_QUAD_CORE_CPU_FREQ_HZ);
+			fdt_setprop_inplace(initial_boot_params, off,
+					    "assigned-clock-rates", &freq, sizeof(freq));
+		}
+	}
+#endif
+
+	/* Memory maps already config in pre-bootloader */
+
+	/* set GPIO mux to UART */
+	iowrite32(0x01, (void __iomem *) CREG_CPU_GPIO_UART_MUX);
+
+	iowrite32((0x00100000U | 0x000C0000U | 0x00003322U),
+		  (void __iomem *) CREG_CPU_TUN_IO_CTRL);
+
+	/* Set up the AXS_MB interrupt system.*/
+	iowrite32(12, (void __iomem *) (CREG_CPU_AXI_M0_IRQ_MUX
+					 + (AXC003_MST_HS38 << 2)));
+
+	/* connect ICTL - Main Board with GPIO line */
+	iowrite32(0x01, (void __iomem *) CREG_MB_IRQ_MUX);
+
+	axs10x_print_board_ver(AXC003_CREG + 4088, "AXC003 CPU Card");
+
+	axs10x_early_init();
+}
+#endif
+
+#ifdef CONFIG_AXS101
+
+static const char *axs101_compat[] __initconst = {
+	"snps,axs101",
+	NULL,
+};
+
+MACHINE_START(AXS101, "axs101")
+	.dt_compat	= axs101_compat,
+	.init_early	= axs101_early_init,
+MACHINE_END
+
+#endif	/* CONFIG_AXS101 */
+
+#ifdef CONFIG_AXS103
+
+static const char *axs103_compat[] __initconst = {
+	"snps,axs103",
+	NULL,
+};
+
+MACHINE_START(AXS103, "axs103")
+	.dt_compat	= axs103_compat,
+	.init_early	= axs103_early_init,
+MACHINE_END
+
+/*
+ * For the VDK OS-kit, to get the offset to pid and command fields
+ */
+char coware_swa_pid_offset[TASK_PID];
+char coware_swa_comm_offset[TASK_COMM];
+
+#endif	/* CONFIG_AXS103 */