Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 213 insertions, 0 deletions

diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
new file mode 100644
index 000000000..2fe0f77d1
--- /dev/null
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-iop32x/glantank.c
+ *
+ * Board support code for the GLAN Tank.
+ *
+ * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/f75375s.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio/machine.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+
+#include "hardware.h"
+#include "gpio-iop32x.h"
+#include "irqs.h"
+
+/*
+ * GLAN Tank timer tick configuration.
+ */
+static void __init glantank_timer_init(void)
+{
+	/* 33.333 MHz crystal.  */
+	iop_init_time(200000000);
+}
+
+
+/*
+ * GLAN Tank I/O.
+ */
+static struct map_desc glantank_io_desc[] __initdata = {
+	{	/* on-board devices */
+		.virtual	= GLANTANK_UART,
+		.pfn		= __phys_to_pfn(GLANTANK_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init glantank_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
+}
+
+
+/*
+ * GLAN Tank PCI.
+ */
+#define INTA	IRQ_IOP32X_XINT0
+#define INTB	IRQ_IOP32X_XINT1
+#define INTC	IRQ_IOP32X_XINT2
+#define INTD	IRQ_IOP32X_XINT3
+
+static int __init
+glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[][4] = {
+		/*
+		 * PCI IDSEL/INTPIN->INTLINE
+		 * A       B       C       D
+		 */
+		{INTD, INTD, INTD, INTD}, /* UART (8250) */
+		{INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
+		{INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
+		{INTC, INTC, INTC, INTC}, /* USB (NEC) */
+	};
+
+	BUG_ON(pin < 1 || pin > 4);
+
+	return pci_irq_table[slot % 4][pin - 1];
+}
+
+static struct hw_pci glantank_pci __initdata = {
+	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.map_irq	= glantank_pci_map_irq,
+};
+
+static int __init glantank_pci_init(void)
+{
+	if (machine_is_glantank())
+		pci_common_init(&glantank_pci);
+
+	return 0;
+}
+
+subsys_initcall(glantank_pci_init);
+
+
+/*
+ * GLAN Tank machine initialization.
+ */
+static struct physmap_flash_data glantank_flash_data = {
+	.width		= 2,
+};
+
+static struct resource glantank_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf007ffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device glantank_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &glantank_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &glantank_flash_resource,
+};
+
+static struct plat_serial8250_port glantank_serial_port[] = {
+	{
+		.mapbase	= GLANTANK_UART,
+		.membase	= (char *)GLANTANK_UART,
+		.irq		= IRQ_IOP32X_XINT3,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource glantank_uart_resource = {
+	.start		= GLANTANK_UART,
+	.end		= GLANTANK_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device glantank_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= glantank_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &glantank_uart_resource,
+};
+
+static struct f75375s_platform_data glantank_f75375s = {
+	.pwm		= { 255, 255 },
+	.pwm_enable	= { 0, 0 },
+};
+
+static struct i2c_board_info __initdata glantank_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372a", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("f75375", 0x2e),
+		.platform_data = &glantank_f75375s,
+	},
+};
+
+static void glantank_power_off(void)
+{
+	__raw_writeb(0x01, IOMEM(0xfe8d0004));
+
+	while (1)
+		;
+}
+
+static void __init glantank_init_machine(void)
+{
+	register_iop32x_gpio();
+	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
+	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&glantank_flash_device);
+	platform_device_register(&glantank_serial_device);
+	platform_device_register(&iop3xx_dma_0_channel);
+	platform_device_register(&iop3xx_dma_1_channel);
+
+	i2c_register_board_info(0, glantank_i2c_devices,
+		ARRAY_SIZE(glantank_i2c_devices));
+
+	pm_power_off = glantank_power_off;
+}
+
+MACHINE_START(GLANTANK, "GLAN Tank")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.atag_offset	= 0x100,
+	.map_io		= glantank_map_io,
+	.init_irq	= iop32x_init_irq,
+	.init_time	= glantank_timer_init,
+	.init_machine	= glantank_init_machine,
+	.restart	= iop3xx_restart,
+MACHINE_END