Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 238 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
new file mode 100644
index 000000000..2b7230594
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+	model = "Google Cheza (rev2)";
+	compatible = "google,cheza-rev2", "qcom,sdm845";
+
+	/*
+	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
+	 */
+
+	/*
+	 * NOTE: Technically pp3500_a is not the exact same signal as
+	 * pp3500_a_vbob (there's a load switch between them and the EC can
+	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
+	 * view they are the same.
+	 */
+	pp3500_a:
+	pp3500_a_vbob: pp3500-a-vbob-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob";
+
+		/*
+		 * Comes on automatically when pp5000_ldo comes on, which
+		 * comes on automatically when ppvar_sys comes on
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3500000>;
+		regulator-max-microvolt = <3500000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_dx_edp: pp3300-dx-edp-regulator {
+		/* Yes, it's really 3.5 despite the name of the signal */
+		regulator-min-microvolt = <3500000>;
+		regulator-max-microvolt = <3500000>;
+
+		vin-supply = <&pp3500_a>;
+	};
+};
+
+/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
+
+/*
+ * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
+ * that limits them to 3.0, and trying to run at 3.3V with that old firmware
+ * prevents the system from booting.
+ */
+&src_pp3000_l19a {
+	regulator-min-microvolt = <3008000>;
+	regulator-max-microvolt = <3008000>;
+};
+
+&src_pp3300_l22a {
+	/delete-property/regulator-boot-on;
+	/delete-property/regulator-always-on;
+};
+
+&src_pp3300_l28a {
+	regulator-min-microvolt = <3008000>;
+	regulator-max-microvolt = <3008000>;
+};
+
+&src_vreg_bob {
+	regulator-min-microvolt = <3500000>;
+	regulator-max-microvolt = <3500000>;
+	vin-supply = <&pp3500_a_vbob>;
+};
+
+/*
+ * NON-REGULATOR OVERRIDES
+ * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
+ */
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "BRIJ_SUSPEND",
+			  "FP_RST_L",
+			  "FCAM_EN",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "EC_IN_RW_ODL",
+			  "",
+			  "RCAM_MCLK",
+			  "FCAM_MCLK",
+			  "",
+			  "RCAM_EN",
+			  "CCI0_SDA",
+			  "CCI0_SCL",
+			  "CCI1_SDA",
+			  "CCI1_SCL",
+			  "FCAM_RST_L",
+			  "FPMCU_BOOT0",
+			  "PEN_RST_L",
+			  "PEN_IRQ_L",
+			  "FPMCU_SEL_OD",
+			  "RCAM_VSYNC",
+			  "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "AP_PEN_1V8_SDA",
+			  "AP_PEN_1V8_SCL",
+			  "AP_TS_I2C_SDA",
+			  "AP_TS_I2C_SCL",
+			  "RCAM_RST_L",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "AP_BRD_ID1",
+			  "BOOT_CONFIG_4",
+			  "AMP_IRQ_L",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "EN_PP3300_DX_EDP",
+			  "SD_CD_ODL",
+			  "BT_UART_RTS",
+			  "BT_UART_CTS",
+			  "BT_UART_RXD",
+			  "BT_UART_TXD",
+			  "AMP_I2C_SDA",
+			  "AMP_I2C_SCL",
+			  "AP_BRD_ID3",
+			  "",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DOUT",
+			  "AMP_DIN",
+			  "AP_BRD_ID2",
+			  "PEN_PDCT_L",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "BT_SLIMBUS_DATA",
+			  "BT_SLIMBUS_CLK",
+			  "AMP_RESET_L",
+			  "",
+			  "FCAM_VSYNC",
+			  "",
+			  "AP_SKU_ID1",
+			  "EC_WOV_BCLK",
+			  "EC_WOV_LRCLK",
+			  "EC_WOV_DOUT",
+			  "",
+			  "",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  "",
+			  "",
+			  "AP_SPI_CLK",
+			  "",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "BOOT_CONFIG_1",
+			  "BOOT_CONFIG_2",
+			  "BOOT_CONFIG_0",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "USB_HS_TX_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "AP_SKU_ID2",
+			  "SDM_GRFC_8",
+			  "SDM_GRFC_9",
+			  "AP_RST_REQ",
+			  "HP_IRQ",
+			  "TS_RESET_L",
+			  "PEN_EJECT_ODL",
+			  "HUB_RST_L",
+			  "FP_TO_AP_IRQ",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "TS_INT_L",
+			  "AP_SUSPEND_L",
+			  "SDM_GRFC_3",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "QLINK_REQ",
+			  "QLINK_EN",
+			  "SDM_GRFC_2",
+			  "BOOT_CONFIG_3",
+			  "WMSS_RESET_L",
+			  "SDM_GRFC_0",
+			  "SDM_GRFC_1",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK",
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "WCI2_LTE_COEX_RXD",
+			  "WCI2_LTE_COEX_TXD",
+			  "AP_RAM_ID1",
+			  "AP_RAM_ID2",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};