Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 136 insertions, 0 deletions

diff --git a/arch/m68k/68000/timers.c b/arch/m68k/68000/timers.c
new file mode 100644
index 000000000..e8dfdd255
--- /dev/null
+++ b/arch/m68k/68000/timers.c
@@ -0,0 +1,136 @@
+/***************************************************************************/
+
+/*
+ *  timers.c - Generic hardware timer support.
+ *
+ *  Copyright (C) 1993 Hamish Macdonald
+ *  Copyright (C) 1999 D. Jeff Dionne
+ *  Copyright (C) 2001 Georges Menie, Ken Desmet
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/***************************************************************************/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clocksource.h>
+#include <linux/rtc.h>
+#include <asm/setup.h>
+#include <asm/machdep.h>
+#include <asm/MC68VZ328.h>
+
+/***************************************************************************/
+
+#if defined(CONFIG_DRAGEN2)
+/* with a 33.16 MHz clock, this will give usec resolution to the time functions */
+#define CLOCK_SOURCE	TCTL_CLKSOURCE_SYSCLK
+#define CLOCK_PRE	7
+#define TICKS_PER_JIFFY	41450
+
+#elif defined(CONFIG_XCOPILOT_BUGS)
+/*
+ * The only thing I know is that CLK32 is not available on Xcopilot
+ * I have little idea about what frequency SYSCLK has on Xcopilot.
+ * The values for prescaler and compare registers were simply
+ * taken from the original source
+ */
+#define CLOCK_SOURCE	TCTL_CLKSOURCE_SYSCLK
+#define CLOCK_PRE	2
+#define TICKS_PER_JIFFY	0xd7e4
+
+#else
+/* default to using the 32Khz clock */
+#define CLOCK_SOURCE	TCTL_CLKSOURCE_32KHZ
+#define CLOCK_PRE	31
+#define TICKS_PER_JIFFY	10
+#endif
+
+static u32 m68328_tick_cnt;
+static irq_handler_t timer_interrupt;
+
+/***************************************************************************/
+
+static irqreturn_t hw_tick(int irq, void *dummy)
+{
+	/* Reset Timer1 */
+	TSTAT &= 0;
+
+	m68328_tick_cnt += TICKS_PER_JIFFY;
+	return timer_interrupt(irq, dummy);
+}
+
+/***************************************************************************/
+
+static u64 m68328_read_clk(struct clocksource *cs)
+{
+	unsigned long flags;
+	u32 cycles;
+
+	local_irq_save(flags);
+	cycles = m68328_tick_cnt + TCN;
+	local_irq_restore(flags);
+
+	return cycles;
+}
+
+/***************************************************************************/
+
+static struct clocksource m68328_clk = {
+	.name	= "timer",
+	.rating	= 250,
+	.read	= m68328_read_clk,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/***************************************************************************/
+
+void hw_timer_init(irq_handler_t handler)
+{
+	int ret;
+
+	/* disable timer 1 */
+	TCTL = 0;
+
+	/* set ISR */
+	ret = request_irq(TMR_IRQ_NUM, hw_tick, IRQF_TIMER, "timer", NULL);
+	if (ret) {
+		pr_err("Failed to request irq %d (timer): %pe\n", TMR_IRQ_NUM,
+		       ERR_PTR(ret));
+	}
+
+	/* Restart mode, Enable int, Set clock source */
+	TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
+	TPRER = CLOCK_PRE;
+	TCMP = TICKS_PER_JIFFY;
+
+	/* Enable timer 1 */
+	TCTL |= TCTL_TEN;
+	clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
+	timer_interrupt = handler;
+}
+
+/***************************************************************************/
+
+int m68328_hwclk(int set, struct rtc_time *t)
+{
+	if (!set) {
+		long now = RTCTIME;
+		t->tm_year = 1;
+		t->tm_mon = 0;
+		t->tm_mday = 1;
+		t->tm_hour = (now >> 24) % 24;
+		t->tm_min = (now >> 16) % 60;
+		t->tm_sec = now % 60;
+	}
+
+	return 0;
+}
+
+/***************************************************************************/