Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 943 insertions, 0 deletions

diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
new file mode 100644
index 000000000..9ad26215b
--- /dev/null
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -0,0 +1,943 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DBAu1200/PBAu1200 board platform device registration
+ *
+ * Copyright (C) 2008-2011 Manuel Lauss
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/platnand.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/smc91x.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+#include <asm/mach-au1x00/au1200fb.h>
+#include <asm/mach-au1x00/au1550_spi.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "platform.h"
+
+#define BCSR_INT_IDE		0x0001
+#define BCSR_INT_ETH		0x0002
+#define BCSR_INT_PC0		0x0004
+#define BCSR_INT_PC0STSCHG	0x0008
+#define BCSR_INT_PC1		0x0010
+#define BCSR_INT_PC1STSCHG	0x0020
+#define BCSR_INT_DC		0x0040
+#define BCSR_INT_FLASHBUSY	0x0080
+#define BCSR_INT_PC0INSERT	0x0100
+#define BCSR_INT_PC0EJECT	0x0200
+#define BCSR_INT_PC1INSERT	0x0400
+#define BCSR_INT_PC1EJECT	0x0800
+#define BCSR_INT_SD0INSERT	0x1000
+#define BCSR_INT_SD0EJECT	0x2000
+#define BCSR_INT_SD1INSERT	0x4000
+#define BCSR_INT_SD1EJECT	0x8000
+
+#define DB1200_IDE_PHYS_ADDR	0x18800000
+#define DB1200_IDE_REG_SHIFT	5
+#define DB1200_IDE_PHYS_LEN	(16 << DB1200_IDE_REG_SHIFT)
+#define DB1200_ETH_PHYS_ADDR	0x19000300
+#define DB1200_NAND_PHYS_ADDR	0x20000000
+
+#define PB1200_IDE_PHYS_ADDR	0x0C800000
+#define PB1200_ETH_PHYS_ADDR	0x0D000300
+#define PB1200_NAND_PHYS_ADDR	0x1C000000
+
+#define DB1200_INT_BEGIN	(AU1000_MAX_INTR + 1)
+#define DB1200_IDE_INT		(DB1200_INT_BEGIN + 0)
+#define DB1200_ETH_INT		(DB1200_INT_BEGIN + 1)
+#define DB1200_PC0_INT		(DB1200_INT_BEGIN + 2)
+#define DB1200_PC0_STSCHG_INT	(DB1200_INT_BEGIN + 3)
+#define DB1200_PC1_INT		(DB1200_INT_BEGIN + 4)
+#define DB1200_PC1_STSCHG_INT	(DB1200_INT_BEGIN + 5)
+#define DB1200_DC_INT		(DB1200_INT_BEGIN + 6)
+#define DB1200_FLASHBUSY_INT	(DB1200_INT_BEGIN + 7)
+#define DB1200_PC0_INSERT_INT	(DB1200_INT_BEGIN + 8)
+#define DB1200_PC0_EJECT_INT	(DB1200_INT_BEGIN + 9)
+#define DB1200_PC1_INSERT_INT	(DB1200_INT_BEGIN + 10)
+#define DB1200_PC1_EJECT_INT	(DB1200_INT_BEGIN + 11)
+#define DB1200_SD0_INSERT_INT	(DB1200_INT_BEGIN + 12)
+#define DB1200_SD0_EJECT_INT	(DB1200_INT_BEGIN + 13)
+#define PB1200_SD1_INSERT_INT	(DB1200_INT_BEGIN + 14)
+#define PB1200_SD1_EJECT_INT	(DB1200_INT_BEGIN + 15)
+#define DB1200_INT_END		(DB1200_INT_BEGIN + 15)
+
+const char *get_system_type(void);
+
+static int __init db1200_detect_board(void)
+{
+	int bid;
+
+	/* try the DB1200 first */
+	bcsr_init(DB1200_BCSR_PHYS_ADDR,
+		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
+	if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+		unsigned short t = bcsr_read(BCSR_HEXLEDS);
+		bcsr_write(BCSR_HEXLEDS, ~t);
+		if (bcsr_read(BCSR_HEXLEDS) != t) {
+			bcsr_write(BCSR_HEXLEDS, t);
+			return 0;
+		}
+	}
+
+	/* okay, try the PB1200 then */
+	bcsr_init(PB1200_BCSR_PHYS_ADDR,
+		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
+	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2)) {
+		unsigned short t = bcsr_read(BCSR_HEXLEDS);
+		bcsr_write(BCSR_HEXLEDS, ~t);
+		if (bcsr_read(BCSR_HEXLEDS) != t) {
+			bcsr_write(BCSR_HEXLEDS, t);
+			return 0;
+		}
+	}
+
+	return 1;	/* it's neither */
+}
+
+int __init db1200_board_setup(void)
+{
+	unsigned short whoami;
+
+	if (db1200_detect_board())
+		return -ENODEV;
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	switch (BCSR_WHOAMI_BOARD(whoami)) {
+	case BCSR_WHOAMI_PB1200_DDR1:
+	case BCSR_WHOAMI_PB1200_DDR2:
+	case BCSR_WHOAMI_DB1200:
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
+		"  Board-ID %d	Daughtercard ID %d\n", get_system_type(),
+		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
+
+	return 0;
+}
+
+/******************************************************************************/
+
+static u64 au1200_all_dmamask = DMA_BIT_MASK(32);
+
+static struct mtd_partition db1200_spiflash_parts[] = {
+	{
+		.name	= "spi_flash",
+		.offset = 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct flash_platform_data db1200_spiflash_data = {
+	.name		= "s25fl001",
+	.parts		= db1200_spiflash_parts,
+	.nr_parts	= ARRAY_SIZE(db1200_spiflash_parts),
+	.type		= "m25p10",
+};
+
+static struct spi_board_info db1200_spi_devs[] __initdata = {
+	{
+		/* TI TMP121AIDBVR temp sensor */
+		.modalias	= "tmp121",
+		.max_speed_hz	= 2000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= 0,
+	},
+	{
+		/* Spansion S25FL001D0FMA SPI flash */
+		.modalias	= "m25p80",
+		.max_speed_hz	= 50000000,
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.mode		= 0,
+		.platform_data	= &db1200_spiflash_data,
+	},
+};
+
+static struct i2c_board_info db1200_i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("24c04", 0x52),  }, /* AT24C04-10 I2C eeprom */
+	{ I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
+	{ I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */
+};
+
+/**********************************************************************/
+
+static void au1200_nand_cmd_ctrl(struct nand_chip *this, int cmd,
+				 unsigned int ctrl)
+{
+	unsigned long ioaddr = (unsigned long)this->legacy.IO_ADDR_W;
+
+	ioaddr &= 0xffffff00;
+
+	if (ctrl & NAND_CLE) {
+		ioaddr += MEM_STNAND_CMD;
+	} else if (ctrl & NAND_ALE) {
+		ioaddr += MEM_STNAND_ADDR;
+	} else {
+		/* assume we want to r/w real data  by default */
+		ioaddr += MEM_STNAND_DATA;
+	}
+	this->legacy.IO_ADDR_R = this->legacy.IO_ADDR_W = (void __iomem *)ioaddr;
+	if (cmd != NAND_CMD_NONE) {
+		__raw_writeb(cmd, this->legacy.IO_ADDR_W);
+		wmb();
+	}
+}
+
+static int au1200_nand_device_ready(struct nand_chip *this)
+{
+	return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1;
+}
+
+static struct mtd_partition db1200_nand_parts[] = {
+	{
+		.name	= "NAND FS 0",
+		.offset = 0,
+		.size	= 8 * 1024 * 1024,
+	},
+	{
+		.name	= "NAND FS 1",
+		.offset = MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+struct platform_nand_data db1200_nand_platdata = {
+	.chip = {
+		.nr_chips	= 1,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(db1200_nand_parts),
+		.partitions	= db1200_nand_parts,
+		.chip_delay	= 20,
+	},
+	.ctrl = {
+		.dev_ready	= au1200_nand_device_ready,
+		.cmd_ctrl	= au1200_nand_cmd_ctrl,
+	},
+};
+
+static struct resource db1200_nand_res[] = {
+	[0] = {
+		.start	= DB1200_NAND_PHYS_ADDR,
+		.end	= DB1200_NAND_PHYS_ADDR + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device db1200_nand_dev = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(db1200_nand_res),
+	.resource	= db1200_nand_res,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &db1200_nand_platdata,
+	}
+};
+
+/**********************************************************************/
+
+static struct smc91x_platdata db1200_eth_data = {
+	.flags	= SMC91X_NOWAIT | SMC91X_USE_16BIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct resource db1200_eth_res[] = {
+	[0] = {
+		.start	= DB1200_ETH_PHYS_ADDR,
+		.end	= DB1200_ETH_PHYS_ADDR + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DB1200_ETH_INT,
+		.end	= DB1200_ETH_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device db1200_eth_dev = {
+	.dev	= {
+		.platform_data	= &db1200_eth_data,
+	},
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(db1200_eth_res),
+	.resource	= db1200_eth_res,
+};
+
+/**********************************************************************/
+
+static struct pata_platform_info db1200_ide_info = {
+	.ioport_shift	= DB1200_IDE_REG_SHIFT,
+};
+
+#define IDE_ALT_START	(14 << DB1200_IDE_REG_SHIFT)
+static struct resource db1200_ide_res[] = {
+	[0] = {
+		.start	= DB1200_IDE_PHYS_ADDR,
+		.end	= DB1200_IDE_PHYS_ADDR + IDE_ALT_START - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DB1200_IDE_PHYS_ADDR + IDE_ALT_START,
+		.end	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= DB1200_IDE_INT,
+		.end	= DB1200_IDE_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device db1200_ide_dev = {
+	.name		= "pata_platform",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1200_all_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200_ide_info,
+	},
+	.num_resources	= ARRAY_SIZE(db1200_ide_res),
+	.resource	= db1200_ide_res,
+};
+
+/**********************************************************************/
+
+#ifdef CONFIG_MMC_AU1X
+/* SD carddetects:  they're supposed to be edge-triggered, but ack
+ * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
+ * is disabled and its counterpart enabled.  The 200ms timeout is
+ * because the carddetect usually triggers twice, after debounce.
+ */
+static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
+{
+	disable_irq_nosync(irq);
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
+{
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
+
+	msleep(100);	/* debounce */
+	if (irq == DB1200_SD0_INSERT_INT)
+		enable_irq(DB1200_SD0_EJECT_INT);
+	else
+		enable_irq(DB1200_SD0_INSERT_INT);
+
+	return IRQ_HANDLED;
+}
+
+static int db1200_mmc_cd_setup(void *mmc_host, int en)
+{
+	int ret;
+
+	if (en) {
+		ret = request_threaded_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd,
+				db1200_mmc_cdfn, 0, "sd_insert", mmc_host);
+		if (ret)
+			goto out;
+
+		ret = request_threaded_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd,
+				db1200_mmc_cdfn, 0, "sd_eject", mmc_host);
+		if (ret) {
+			free_irq(DB1200_SD0_INSERT_INT, mmc_host);
+			goto out;
+		}
+
+		if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT)
+			enable_irq(DB1200_SD0_EJECT_INT);
+		else
+			enable_irq(DB1200_SD0_INSERT_INT);
+
+	} else {
+		free_irq(DB1200_SD0_INSERT_INT, mmc_host);
+		free_irq(DB1200_SD0_EJECT_INT, mmc_host);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void db1200_mmc_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
+}
+
+static int db1200_mmc_card_readonly(void *mmc_host)
+{
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
+}
+
+static int db1200_mmc_card_inserted(void *mmc_host)
+{
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
+}
+
+static void db1200_mmcled_set(struct led_classdev *led,
+			      enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
+}
+
+static struct led_classdev db1200_mmc_led = {
+	.brightness_set = db1200_mmcled_set,
+};
+
+/* -- */
+
+static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
+{
+	disable_irq_nosync(irq);
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
+{
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
+
+	msleep(100);	/* debounce */
+	if (irq == PB1200_SD1_INSERT_INT)
+		enable_irq(PB1200_SD1_EJECT_INT);
+	else
+		enable_irq(PB1200_SD1_INSERT_INT);
+
+	return IRQ_HANDLED;
+}
+
+static int pb1200_mmc1_cd_setup(void *mmc_host, int en)
+{
+	int ret;
+
+	if (en) {
+		ret = request_threaded_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd,
+				pb1200_mmc1_cdfn, 0, "sd1_insert", mmc_host);
+		if (ret)
+			goto out;
+
+		ret = request_threaded_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd,
+				pb1200_mmc1_cdfn, 0, "sd1_eject", mmc_host);
+		if (ret) {
+			free_irq(PB1200_SD1_INSERT_INT, mmc_host);
+			goto out;
+		}
+
+		if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT)
+			enable_irq(PB1200_SD1_EJECT_INT);
+		else
+			enable_irq(PB1200_SD1_INSERT_INT);
+
+	} else {
+		free_irq(PB1200_SD1_INSERT_INT, mmc_host);
+		free_irq(PB1200_SD1_EJECT_INT, mmc_host);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void pb1200_mmc1led_set(struct led_classdev *led,
+			enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+			bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
+	else
+			bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
+}
+
+static struct led_classdev pb1200_mmc1_led = {
+	.brightness_set = pb1200_mmc1led_set,
+};
+
+static void pb1200_mmc1_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
+}
+
+static int pb1200_mmc1_card_readonly(void *mmc_host)
+{
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
+}
+
+static int pb1200_mmc1_card_inserted(void *mmc_host)
+{
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
+}
+
+
+static struct au1xmmc_platform_data db1200_mmc_platdata[2] = {
+	[0] = {
+		.cd_setup	= db1200_mmc_cd_setup,
+		.set_power	= db1200_mmc_set_power,
+		.card_inserted	= db1200_mmc_card_inserted,
+		.card_readonly	= db1200_mmc_card_readonly,
+		.led		= &db1200_mmc_led,
+	},
+	[1] = {
+		.cd_setup	= pb1200_mmc1_cd_setup,
+		.set_power	= pb1200_mmc1_set_power,
+		.card_inserted	= pb1200_mmc1_card_inserted,
+		.card_readonly	= pb1200_mmc1_card_readonly,
+		.led		= &pb1200_mmc1_led,
+	},
+};
+
+static struct resource au1200_mmc0_resources[] = {
+	[0] = {
+		.start	= AU1100_SD0_PHYS_ADDR,
+		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX0,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX0,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX0,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX0,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device db1200_mmc0_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1200_all_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200_mmc_platdata[0],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
+	.resource	= au1200_mmc0_resources,
+};
+
+static struct resource au1200_mmc1_res[] = {
+	[0] = {
+		.start	= AU1100_SD1_PHYS_ADDR,
+		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device pb1200_mmc1_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= &au1200_all_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200_mmc_platdata[1],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
+	.resource	= au1200_mmc1_res,
+};
+#endif /* CONFIG_MMC_AU1X */
+
+/**********************************************************************/
+
+static int db1200fb_panel_index(void)
+{
+	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
+}
+
+static int db1200fb_panel_init(void)
+{
+	/* Apply power */
+	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+				BCSR_BOARD_LCDBL);
+	return 0;
+}
+
+static int db1200fb_panel_shutdown(void)
+{
+	/* Remove power */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+			     BCSR_BOARD_LCDBL, 0);
+	return 0;
+}
+
+static struct au1200fb_platdata db1200fb_pd = {
+	.panel_index	= db1200fb_panel_index,
+	.panel_init	= db1200fb_panel_init,
+	.panel_shutdown = db1200fb_panel_shutdown,
+};
+
+static struct resource au1200_lcd_res[] = {
+	[0] = {
+		.start	= AU1200_LCD_PHYS_ADDR,
+		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_LCD_INT,
+		.end	= AU1200_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device au1200_lcd_dev = {
+	.name		= "au1200-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1200_all_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200fb_pd,
+	},
+	.num_resources	= ARRAY_SIZE(au1200_lcd_res),
+	.resource	= au1200_lcd_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1200_psc0_res[] = {
+	[0] = {
+		.start	= AU1550_PSC0_PHYS_ADDR,
+		.end	= AU1550_PSC0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_PSC0_INT,
+		.end	= AU1200_PSC0_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_PSC0_TX,
+		.end	= AU1200_DSCR_CMD0_PSC0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_PSC0_RX,
+		.end	= AU1200_DSCR_CMD0_PSC0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1200_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
+	.resource	= au1200_psc0_res,
+};
+
+static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
+{
+	if (cs)
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL);
+	else
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0);
+}
+
+static struct au1550_spi_info db1200_spi_platdata = {
+	.mainclk_hz	= 50000000,	/* PSC0 clock */
+	.num_chipselect = 2,
+	.activate_cs	= db1200_spi_cs_en,
+};
+
+static struct platform_device db1200_spi_dev = {
+	.dev	= {
+		.dma_mask		= &au1200_all_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200_spi_platdata,
+	},
+	.name		= "au1550-spi",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
+	.resource	= au1200_psc0_res,
+};
+
+static struct resource au1200_psc1_res[] = {
+	[0] = {
+		.start	= AU1550_PSC1_PHYS_ADDR,
+		.end	= AU1550_PSC1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_PSC1_INT,
+		.end	= AU1200_PSC1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_PSC1_TX,
+		.end	= AU1200_DSCR_CMD0_PSC1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_PSC1_RX,
+		.end	= AU1200_DSCR_CMD0_PSC1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+/* AC97 or I2S device */
+static struct platform_device db1200_audio_dev = {
+	/* name assigned later based on switch setting */
+	.id		= 1,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1200_psc1_res),
+	.resource	= au1200_psc1_res,
+};
+
+/* DB1200 ASoC card device */
+static struct platform_device db1200_sound_dev = {
+	/* name assigned later based on switch setting */
+	.id		= 1,	/* PSC ID */
+	.dev = {
+		.dma_mask		= &au1200_all_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct platform_device db1200_stac_dev = {
+	.name		= "ac97-codec",
+	.id		= 1,	/* on PSC1 */
+};
+
+static struct platform_device db1200_audiodma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 1,	/* PSC ID */
+};
+
+static struct platform_device *db1200_devs[] __initdata = {
+	NULL,		/* PSC0, selected by S6.8 */
+	&db1200_ide_dev,
+#ifdef CONFIG_MMC_AU1X
+	&db1200_mmc0_dev,
+#endif
+	&au1200_lcd_dev,
+	&db1200_eth_dev,
+	&db1200_nand_dev,
+	&db1200_audiodma_dev,
+	&db1200_audio_dev,
+	&db1200_stac_dev,
+	&db1200_sound_dev,
+};
+
+static struct platform_device *pb1200_devs[] __initdata = {
+#ifdef CONFIG_MMC_AU1X
+	&pb1200_mmc1_dev,
+#endif
+};
+
+/* Some peripheral base addresses differ on the PB1200 */
+static int __init pb1200_res_fixup(void)
+{
+	/* CPLD Revs earlier than 4 cause problems */
+	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n");
+		printk(KERN_ERR "the board updated to latest revisions.\n");
+		printk(KERN_ERR "This software will not work reliably\n");
+		printk(KERN_ERR "on anything older than CPLD rev 4.!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		return 1;
+	}
+
+	db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
+	db1200_nand_res[0].end	 = PB1200_NAND_PHYS_ADDR + 0xff;
+	db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
+	db1200_ide_res[0].end	= PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
+	db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
+	db1200_eth_res[0].end	= PB1200_ETH_PHYS_ADDR + 0xff;
+	return 0;
+}
+
+int __init db1200_dev_setup(void)
+{
+	unsigned long pfc;
+	unsigned short sw;
+	int swapped, bid;
+	struct clk *c;
+
+	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2)) {
+		if (pb1200_res_fixup())
+			return -ENODEV;
+	}
+
+	/* GPIO7 is low-level triggered CPLD cascade */
+	irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
+	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
+
+	/* SMBus/SPI on PSC0, Audio on PSC1 */
+	pfc = alchemy_rdsys(AU1000_SYS_PINFUNC);
+	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
+	pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
+	alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
+
+	/* get 50MHz for I2C driver on PSC0 */
+	c = clk_get(NULL, "psc0_intclk");
+	if (!IS_ERR(c)) {
+		pfc = clk_round_rate(c, 50000000);
+		if ((pfc < 1) || (abs(50000000 - pfc) > 2500000))
+			pr_warn("DB1200: cant get I2C close to 50MHz\n");
+		else
+			clk_set_rate(c, pfc);
+		clk_prepare_enable(c);
+		clk_put(c);
+	}
+
+	/* insert/eject pairs: one of both is always screaming.	 To avoid
+	 * issues they must not be automatically enabled when initially
+	 * requested.
+	 */
+	irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
+
+	i2c_register_board_info(0, db1200_i2c_devs,
+				ARRAY_SIZE(db1200_i2c_devs));
+	spi_register_board_info(db1200_spi_devs,
+				ARRAY_SIZE(db1200_spi_devs));
+
+	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C	 ON=SPI)
+	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
+	 *		or S12 on the PB1200.
+	 */
+
+	/* NOTE: GPIO215 controls OTG VBUS supply.  In SPI mode however
+	 * this pin is claimed by PSC0 (unused though, but pinmux doesn't
+	 * allow to free it without crippling the SPI interface).
+	 * As a result, in SPI mode, OTG simply won't work (PSC0 uses
+	 * it as an input pin which is pulled high on the boards).
+	 */
+	pfc = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
+
+	/* switch off OTG VBUS supply */
+	gpio_request(215, "otg-vbus");
+	gpio_direction_output(215, 1);
+
+	printk(KERN_INFO "%s device configuration:\n", get_system_type());
+
+	sw = bcsr_read(BCSR_SWITCHES);
+	if (sw & BCSR_SWITCHES_DIP_8) {
+		db1200_devs[0] = &db1200_i2c_dev;
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
+
+		pfc |= (2 << 17);	/* GPIO2 block owns GPIO215 */
+
+		printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n");
+		printk(KERN_INFO "   OTG port VBUS supply available!\n");
+	} else {
+		db1200_devs[0] = &db1200_spi_dev;
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX);
+
+		pfc |= (1 << 17);	/* PSC0 owns GPIO215 */
+
+		printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
+		printk(KERN_INFO "   OTG port VBUS supply disabled\n");
+	}
+	alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
+
+	/* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S!
+	 * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S
+	 */
+	sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7;
+	if (sw == BCSR_SWITCHES_DIP_8) {
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
+		db1200_audio_dev.name = "au1xpsc_i2s";
+		db1200_sound_dev.name = "db1200-i2s";
+		printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
+	} else {
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
+		db1200_audio_dev.name = "au1xpsc_ac97";
+		db1200_sound_dev.name = "db1200-ac97";
+		printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
+	}
+
+	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		DB1200_PC0_INT, DB1200_PC0_INSERT_INT,
+		/*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0);
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+		DB1200_PC1_INT, DB1200_PC1_INSERT_INT,
+		/*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1);
+
+	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
+	db1x_register_norflash(64 << 20, 2, swapped);
+
+	platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
+
+	/* PB1200 is a DB1200 with a 2nd MMC and Camera connector */
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2))
+		platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs));
+
+	return 0;
+}