Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 4286 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/4xx/Makefile b/arch/powerpc/platforms/4xx/Makefile
new file mode 100644
index 000000000..d009d2e0b
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y				+= uic.o machine_check.o
+obj-$(CONFIG_4xx_SOC)		+= soc.o
+obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_PPC4xx_HSTA_MSI)	+= hsta_msi.o
+obj-$(CONFIG_PPC4xx_MSI)	+= msi.o
+obj-$(CONFIG_PPC4xx_CPM)	+= cpm.o
+obj-$(CONFIG_PPC4xx_GPIO)	+= gpio.o
diff --git a/arch/powerpc/platforms/4xx/cpm.c b/arch/powerpc/platforms/4xx/cpm.c
new file mode 100644
index 000000000..2481e78c0
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/cpm.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PowerPC 4xx Clock and Power Management
+ *
+ * Copyright (C) 2010, Applied Micro Circuits Corporation
+ * Victor Gallardo (vgallardo@apm.com)
+ *
+ * Based on arch/powerpc/platforms/44x/idle.c:
+ * Jerone Young <jyoung5@us.ibm.com>
+ * Copyright 2008 IBM Corp.
+ *
+ * Based on arch/powerpc/sysdev/fsl_pmc.c:
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ * Copyright 2009  MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/sysfs.h>
+#include <linux/cpu.h>
+#include <linux/suspend.h>
+#include <asm/dcr.h>
+#include <asm/dcr-native.h>
+#include <asm/machdep.h>
+
+#define CPM_ER	0
+#define CPM_FR	1
+#define CPM_SR	2
+
+#define CPM_IDLE_WAIT	0
+#define CPM_IDLE_DOZE	1
+
+struct cpm {
+	dcr_host_t	dcr_host;
+	unsigned int	dcr_offset[3];
+	unsigned int	powersave_off;
+	unsigned int	unused;
+	unsigned int	idle_doze;
+	unsigned int	standby;
+	unsigned int	suspend;
+};
+
+static struct cpm cpm;
+
+struct cpm_idle_mode {
+	unsigned int enabled;
+	const char  *name;
+};
+
+static struct cpm_idle_mode idle_mode[] = {
+	[CPM_IDLE_WAIT] = { 1, "wait" }, /* default */
+	[CPM_IDLE_DOZE] = { 0, "doze" },
+};
+
+static unsigned int cpm_set(unsigned int cpm_reg, unsigned int mask)
+{
+	unsigned int value;
+
+	/* CPM controller supports 3 different types of sleep interface
+	 * known as class 1, 2 and 3. For class 1 units, they are
+	 * unconditionally put to sleep when the corresponding CPM bit is
+	 * set. For class 2 and 3 units this is not case; if they can be
+	 * put to to sleep, they will. Here we do not verify, we just
+	 * set them and expect them to eventually go off when they can.
+	 */
+	value = dcr_read(cpm.dcr_host, cpm.dcr_offset[cpm_reg]);
+	dcr_write(cpm.dcr_host, cpm.dcr_offset[cpm_reg], value | mask);
+
+	/* return old state, to restore later if needed */
+	return value;
+}
+
+static void cpm_idle_wait(void)
+{
+	unsigned long msr_save;
+
+	/* save off initial state */
+	msr_save = mfmsr();
+	/* sync required when CPM0_ER[CPU] is set */
+	mb();
+	/* set wait state MSR */
+	mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE);
+	isync();
+	/* return to initial state */
+	mtmsr(msr_save);
+	isync();
+}
+
+static void cpm_idle_sleep(unsigned int mask)
+{
+	unsigned int er_save;
+
+	/* update CPM_ER state */
+	er_save = cpm_set(CPM_ER, mask);
+
+	/* go to wait state so that CPM0_ER[CPU] can take effect */
+	cpm_idle_wait();
+
+	/* restore CPM_ER state */
+	dcr_write(cpm.dcr_host, cpm.dcr_offset[CPM_ER], er_save);
+}
+
+static void cpm_idle_doze(void)
+{
+	cpm_idle_sleep(cpm.idle_doze);
+}
+
+static void cpm_idle_config(int mode)
+{
+	int i;
+
+	if (idle_mode[mode].enabled)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(idle_mode); i++)
+		idle_mode[i].enabled = 0;
+
+	idle_mode[mode].enabled = 1;
+}
+
+static ssize_t cpm_idle_show(struct kobject *kobj,
+			     struct kobj_attribute *attr, char *buf)
+{
+	char *s = buf;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
+		if (idle_mode[i].enabled)
+			s += sprintf(s, "[%s] ", idle_mode[i].name);
+		else
+			s += sprintf(s, "%s ", idle_mode[i].name);
+	}
+
+	*(s-1) = '\n'; /* convert the last space to a newline */
+
+	return s - buf;
+}
+
+static ssize_t cpm_idle_store(struct kobject *kobj,
+			      struct kobj_attribute *attr,
+			      const char *buf, size_t n)
+{
+	int i;
+	char *p;
+	int len;
+
+	p = memchr(buf, '\n', n);
+	len = p ? p - buf : n;
+
+	for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
+		if (strncmp(buf, idle_mode[i].name, len) == 0) {
+			cpm_idle_config(i);
+			return n;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static struct kobj_attribute cpm_idle_attr =
+	__ATTR(idle, 0644, cpm_idle_show, cpm_idle_store);
+
+static void cpm_idle_config_sysfs(void)
+{
+	struct device *dev;
+	unsigned long ret;
+
+	dev = get_cpu_device(0);
+
+	ret = sysfs_create_file(&dev->kobj,
+				&cpm_idle_attr.attr);
+	if (ret)
+		printk(KERN_WARNING
+		       "cpm: failed to create idle sysfs entry\n");
+}
+
+static void cpm_idle(void)
+{
+	if (idle_mode[CPM_IDLE_DOZE].enabled)
+		cpm_idle_doze();
+	else
+		cpm_idle_wait();
+}
+
+static int cpm_suspend_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return !!cpm.standby;
+	case PM_SUSPEND_MEM:
+		return !!cpm.suspend;
+	default:
+		return 0;
+	}
+}
+
+static void cpm_suspend_standby(unsigned int mask)
+{
+	unsigned long tcr_save;
+
+	/* disable decrement interrupt */
+	tcr_save = mfspr(SPRN_TCR);
+	mtspr(SPRN_TCR, tcr_save & ~TCR_DIE);
+
+	/* go to sleep state */
+	cpm_idle_sleep(mask);
+
+	/* restore decrement interrupt */
+	mtspr(SPRN_TCR, tcr_save);
+}
+
+static int cpm_suspend_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		cpm_suspend_standby(cpm.standby);
+		break;
+	case PM_SUSPEND_MEM:
+		cpm_suspend_standby(cpm.suspend);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct platform_suspend_ops cpm_suspend_ops = {
+	.valid		= cpm_suspend_valid,
+	.enter		= cpm_suspend_enter,
+};
+
+static int cpm_get_uint_property(struct device_node *np,
+				 const char *name)
+{
+	int len;
+	const unsigned int *prop = of_get_property(np, name, &len);
+
+	if (prop == NULL || len < sizeof(u32))
+		return 0;
+
+	return *prop;
+}
+
+static int __init cpm_init(void)
+{
+	struct device_node *np;
+	int dcr_base, dcr_len;
+	int ret = 0;
+
+	if (!cpm.powersave_off) {
+		cpm_idle_config(CPM_IDLE_WAIT);
+		ppc_md.power_save = &cpm_idle;
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,cpm");
+	if (!np) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	dcr_base = dcr_resource_start(np, 0);
+	dcr_len = dcr_resource_len(np, 0);
+
+	if (dcr_base == 0 || dcr_len == 0) {
+		printk(KERN_ERR "cpm: could not parse dcr property for %pOF\n",
+		       np);
+		ret = -EINVAL;
+		goto node_put;
+	}
+
+	cpm.dcr_host = dcr_map(np, dcr_base, dcr_len);
+
+	if (!DCR_MAP_OK(cpm.dcr_host)) {
+		printk(KERN_ERR "cpm: failed to map dcr property for %pOF\n",
+		       np);
+		ret = -EINVAL;
+		goto node_put;
+	}
+
+	/* All 4xx SoCs with a CPM controller have one of two
+	 * different order for the CPM registers. Some have the
+	 * CPM registers in the following order (ER,FR,SR). The
+	 * others have them in the following order (SR,ER,FR).
+	 */
+
+	if (cpm_get_uint_property(np, "er-offset") == 0) {
+		cpm.dcr_offset[CPM_ER] = 0;
+		cpm.dcr_offset[CPM_FR] = 1;
+		cpm.dcr_offset[CPM_SR] = 2;
+	} else {
+		cpm.dcr_offset[CPM_ER] = 1;
+		cpm.dcr_offset[CPM_FR] = 2;
+		cpm.dcr_offset[CPM_SR] = 0;
+	}
+
+	/* Now let's see what IPs to turn off for the following modes */
+
+	cpm.unused = cpm_get_uint_property(np, "unused-units");
+	cpm.idle_doze = cpm_get_uint_property(np, "idle-doze");
+	cpm.standby = cpm_get_uint_property(np, "standby");
+	cpm.suspend = cpm_get_uint_property(np, "suspend");
+
+	/* If some IPs are unused let's turn them off now */
+
+	if (cpm.unused) {
+		cpm_set(CPM_ER, cpm.unused);
+		cpm_set(CPM_FR, cpm.unused);
+	}
+
+	/* Now let's export interfaces */
+
+	if (!cpm.powersave_off && cpm.idle_doze)
+		cpm_idle_config_sysfs();
+
+	if (cpm.standby || cpm.suspend)
+		suspend_set_ops(&cpm_suspend_ops);
+node_put:
+	of_node_put(np);
+out:
+	return ret;
+}
+
+late_initcall(cpm_init);
+
+static int __init cpm_powersave_off(char *arg)
+{
+	cpm.powersave_off = 1;
+	return 1;
+}
+__setup("powersave=off", cpm_powersave_off);
diff --git a/arch/powerpc/platforms/4xx/gpio.c b/arch/powerpc/platforms/4xx/gpio.c
new file mode 100644
index 000000000..49ee8d365
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/gpio.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PPC4xx gpio driver
+ *
+ * Copyright (c) 2008 Harris Corporation
+ * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Steve Falco <sfalco@harris.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+
+#define GPIO_MASK(gpio)		(0x80000000 >> (gpio))
+#define GPIO_MASK2(gpio)	(0xc0000000 >> ((gpio) * 2))
+
+/* Physical GPIO register layout */
+struct ppc4xx_gpio {
+	__be32 or;
+	__be32 tcr;
+	__be32 osrl;
+	__be32 osrh;
+	__be32 tsrl;
+	__be32 tsrh;
+	__be32 odr;
+	__be32 ir;
+	__be32 rr1;
+	__be32 rr2;
+	__be32 rr3;
+	__be32 reserved1;
+	__be32 isr1l;
+	__be32 isr1h;
+	__be32 isr2l;
+	__be32 isr2h;
+	__be32 isr3l;
+	__be32 isr3h;
+};
+
+struct ppc4xx_gpio_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+};
+
+/*
+ * GPIO LIB API implementation for GPIOs
+ *
+ * There are a maximum of 32 gpios in each gpio controller.
+ */
+
+static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+	return !!(in_be32(&regs->ir) & GPIO_MASK(gpio));
+}
+
+static inline void
+__ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+	if (val)
+		setbits32(&regs->or, GPIO_MASK(gpio));
+	else
+		clrbits32(&regs->or, GPIO_MASK(gpio));
+}
+
+static void
+ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	__ppc4xx_gpio_set(gc, gpio, val);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+}
+
+static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	/* Disable open-drain function */
+	clrbits32(&regs->odr, GPIO_MASK(gpio));
+
+	/* Float the pin */
+	clrbits32(&regs->tcr, GPIO_MASK(gpio));
+
+	/* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
+	if (gpio < 16) {
+		clrbits32(&regs->osrl, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrl, GPIO_MASK2(gpio));
+	} else {
+		clrbits32(&regs->osrh, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
+	}
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int
+ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	/* First set initial value */
+	__ppc4xx_gpio_set(gc, gpio, val);
+
+	/* Disable open-drain function */
+	clrbits32(&regs->odr, GPIO_MASK(gpio));
+
+	/* Drive the pin */
+	setbits32(&regs->tcr, GPIO_MASK(gpio));
+
+	/* Bits 0-15 use TSRL, bits 16-31 use TSRH */
+	if (gpio < 16) {
+		clrbits32(&regs->osrl, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrl, GPIO_MASK2(gpio));
+	} else {
+		clrbits32(&regs->osrh, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
+	}
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+	return 0;
+}
+
+static int __init ppc4xx_add_gpiochips(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "ibm,ppc4xx-gpio") {
+		int ret;
+		struct ppc4xx_gpio_chip *ppc4xx_gc;
+		struct of_mm_gpio_chip *mm_gc;
+		struct gpio_chip *gc;
+
+		ppc4xx_gc = kzalloc(sizeof(*ppc4xx_gc), GFP_KERNEL);
+		if (!ppc4xx_gc) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		spin_lock_init(&ppc4xx_gc->lock);
+
+		mm_gc = &ppc4xx_gc->mm_gc;
+		gc = &mm_gc->gc;
+
+		gc->ngpio = 32;
+		gc->direction_input = ppc4xx_gpio_dir_in;
+		gc->direction_output = ppc4xx_gpio_dir_out;
+		gc->get = ppc4xx_gpio_get;
+		gc->set = ppc4xx_gpio_set;
+
+		ret = of_mm_gpiochip_add_data(np, mm_gc, ppc4xx_gc);
+		if (ret)
+			goto err;
+		continue;
+err:
+		pr_err("%pOF: registration failed with status %d\n", np, ret);
+		kfree(ppc4xx_gc);
+		/* try others anyway */
+	}
+	return 0;
+}
+arch_initcall(ppc4xx_add_gpiochips);
diff --git a/arch/powerpc/platforms/4xx/hsta_msi.c b/arch/powerpc/platforms/4xx/hsta_msi.c
new file mode 100644
index 000000000..c950fed43
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/hsta_msi.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MSI support for PPC4xx SoCs using High Speed Transfer Assist (HSTA) for
+ * generation of the interrupt.
+ *
+ * Copyright © 2013 Alistair Popple <alistair@popple.id.au> IBM Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/msi.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/semaphore.h>
+#include <asm/msi_bitmap.h>
+#include <asm/ppc-pci.h>
+
+struct ppc4xx_hsta_msi {
+	struct device *dev;
+
+	/* The ioremapped HSTA MSI IO space */
+	u32 __iomem *data;
+
+	/* Physical address of HSTA MSI IO space */
+	u64 address;
+	struct msi_bitmap bmp;
+
+	/* An array mapping offsets to hardware IRQs */
+	int *irq_map;
+
+	/* Number of hwirqs supported */
+	int irq_count;
+};
+static struct ppc4xx_hsta_msi ppc4xx_hsta_msi;
+
+static int hsta_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	struct msi_msg msg;
+	struct msi_desc *entry;
+	int irq, hwirq;
+	u64 addr;
+
+	/* We don't support MSI-X */
+	if (type == PCI_CAP_ID_MSIX) {
+		pr_debug("%s: MSI-X not supported.\n", __func__);
+		return -EINVAL;
+	}
+
+	for_each_pci_msi_entry(entry, dev) {
+		irq = msi_bitmap_alloc_hwirqs(&ppc4xx_hsta_msi.bmp, 1);
+		if (irq < 0) {
+			pr_debug("%s: Failed to allocate msi interrupt\n",
+				 __func__);
+			return irq;
+		}
+
+		hwirq = ppc4xx_hsta_msi.irq_map[irq];
+		if (!hwirq) {
+			pr_err("%s: Failed mapping irq %d\n", __func__, irq);
+			return -EINVAL;
+		}
+
+		/*
+		 * HSTA generates interrupts on writes to 128-bit aligned
+		 * addresses.
+		 */
+		addr = ppc4xx_hsta_msi.address + irq*0x10;
+		msg.address_hi = upper_32_bits(addr);
+		msg.address_lo = lower_32_bits(addr);
+
+		/* Data is not used by the HSTA. */
+		msg.data = 0;
+
+		pr_debug("%s: Setup irq %d (0x%0llx)\n", __func__, hwirq,
+			 (((u64) msg.address_hi) << 32) | msg.address_lo);
+
+		if (irq_set_msi_desc(hwirq, entry)) {
+			pr_err(
+			"%s: Invalid hwirq %d specified in device tree\n",
+			__func__, hwirq);
+			msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1);
+			return -EINVAL;
+		}
+		pci_write_msi_msg(hwirq, &msg);
+	}
+
+	return 0;
+}
+
+static int hsta_find_hwirq_offset(int hwirq)
+{
+	int irq;
+
+	/* Find the offset given the hwirq */
+	for (irq = 0; irq < ppc4xx_hsta_msi.irq_count; irq++)
+		if (ppc4xx_hsta_msi.irq_map[irq] == hwirq)
+			return irq;
+
+	return -EINVAL;
+}
+
+static void hsta_teardown_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_desc *entry;
+	int irq;
+
+	for_each_pci_msi_entry(entry, dev) {
+		if (!entry->irq)
+			continue;
+
+		irq = hsta_find_hwirq_offset(entry->irq);
+
+		/* entry->irq should always be in irq_map */
+		BUG_ON(irq < 0);
+		irq_set_msi_desc(entry->irq, NULL);
+		msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1);
+		pr_debug("%s: Teardown IRQ %u (index %u)\n", __func__,
+			 entry->irq, irq);
+	}
+}
+
+static int hsta_msi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *mem;
+	int irq, ret, irq_count;
+	struct pci_controller *phb;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(dev, "Unable to get mmio space\n");
+		return -EINVAL;
+	}
+
+	irq_count = of_irq_count(dev->of_node);
+	if (!irq_count) {
+		dev_err(dev, "Unable to find IRQ range\n");
+		return -EINVAL;
+	}
+
+	ppc4xx_hsta_msi.dev = dev;
+	ppc4xx_hsta_msi.address = mem->start;
+	ppc4xx_hsta_msi.data = ioremap(mem->start, resource_size(mem));
+	ppc4xx_hsta_msi.irq_count = irq_count;
+	if (!ppc4xx_hsta_msi.data) {
+		dev_err(dev, "Unable to map memory\n");
+		return -ENOMEM;
+	}
+
+	ret = msi_bitmap_alloc(&ppc4xx_hsta_msi.bmp, irq_count, dev->of_node);
+	if (ret)
+		goto out;
+
+	ppc4xx_hsta_msi.irq_map = kmalloc_array(irq_count, sizeof(int),
+						GFP_KERNEL);
+	if (!ppc4xx_hsta_msi.irq_map) {
+		ret = -ENOMEM;
+		goto out1;
+	}
+
+	/* Setup a mapping from irq offsets to hardware irq numbers */
+	for (irq = 0; irq < irq_count; irq++) {
+		ppc4xx_hsta_msi.irq_map[irq] =
+			irq_of_parse_and_map(dev->of_node, irq);
+		if (!ppc4xx_hsta_msi.irq_map[irq]) {
+			dev_err(dev, "Unable to map IRQ\n");
+			ret = -EINVAL;
+			goto out2;
+		}
+	}
+
+	list_for_each_entry(phb, &hose_list, list_node) {
+		phb->controller_ops.setup_msi_irqs = hsta_setup_msi_irqs;
+		phb->controller_ops.teardown_msi_irqs = hsta_teardown_msi_irqs;
+	}
+	return 0;
+
+out2:
+	kfree(ppc4xx_hsta_msi.irq_map);
+
+out1:
+	msi_bitmap_free(&ppc4xx_hsta_msi.bmp);
+
+out:
+	iounmap(ppc4xx_hsta_msi.data);
+	return ret;
+}
+
+static const struct of_device_id hsta_msi_ids[] = {
+	{
+		.compatible = "ibm,hsta-msi",
+	},
+	{}
+};
+
+static struct platform_driver hsta_msi_driver = {
+	.probe = hsta_msi_probe,
+	.driver = {
+		.name = "hsta-msi",
+		.of_match_table = hsta_msi_ids,
+	},
+};
+
+static int hsta_msi_init(void)
+{
+	return platform_driver_register(&hsta_msi_driver);
+}
+subsys_initcall(hsta_msi_init);
diff --git a/arch/powerpc/platforms/4xx/machine_check.c b/arch/powerpc/platforms/4xx/machine_check.c
new file mode 100644
index 000000000..a71c29892
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/machine_check.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ */
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/ptrace.h>
+
+#include <asm/reg.h>
+
+int machine_check_4xx(struct pt_regs *regs)
+{
+	unsigned long reason = regs->dsisr;
+
+	if (reason & ESR_IMCP) {
+		printk("Instruction");
+		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
+	} else
+		printk("Data");
+	printk(" machine check in kernel mode.\n");
+
+	return 0;
+}
diff --git a/arch/powerpc/platforms/4xx/msi.c b/arch/powerpc/platforms/4xx/msi.c
new file mode 100644
index 000000000..1051564b9
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/msi.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Adding PCI-E MSI support for PPC4XX SoCs.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Authors:	Tirumala R Marri <tmarri@apm.com>
+ *		Feng Kan <fkan@apm.com>
+ */
+
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <asm/msi_bitmap.h>
+
+#define PEIH_TERMADH	0x00
+#define PEIH_TERMADL	0x08
+#define PEIH_MSIED	0x10
+#define PEIH_MSIMK	0x18
+#define PEIH_MSIASS	0x20
+#define PEIH_FLUSH0	0x30
+#define PEIH_FLUSH1	0x38
+#define PEIH_CNTRST	0x48
+
+static int msi_irqs;
+
+struct ppc4xx_msi {
+	u32 msi_addr_lo;
+	u32 msi_addr_hi;
+	void __iomem *msi_regs;
+	int *msi_virqs;
+	struct msi_bitmap bitmap;
+	struct device_node *msi_dev;
+};
+
+static struct ppc4xx_msi ppc4xx_msi;
+
+static int ppc4xx_msi_init_allocator(struct platform_device *dev,
+		struct ppc4xx_msi *msi_data)
+{
+	int err;
+
+	err = msi_bitmap_alloc(&msi_data->bitmap, msi_irqs,
+			      dev->dev.of_node);
+	if (err)
+		return err;
+
+	err = msi_bitmap_reserve_dt_hwirqs(&msi_data->bitmap);
+	if (err < 0) {
+		msi_bitmap_free(&msi_data->bitmap);
+		return err;
+	}
+
+	return 0;
+}
+
+static int ppc4xx_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	int int_no = -ENOMEM;
+	unsigned int virq;
+	struct msi_msg msg;
+	struct msi_desc *entry;
+	struct ppc4xx_msi *msi_data = &ppc4xx_msi;
+
+	dev_dbg(&dev->dev, "PCIE-MSI:%s called. vec %x type %d\n",
+		__func__, nvec, type);
+	if (type == PCI_CAP_ID_MSIX)
+		pr_debug("ppc4xx msi: MSI-X untested, trying anyway.\n");
+
+	msi_data->msi_virqs = kmalloc_array(msi_irqs, sizeof(int), GFP_KERNEL);
+	if (!msi_data->msi_virqs)
+		return -ENOMEM;
+
+	for_each_pci_msi_entry(entry, dev) {
+		int_no = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
+		if (int_no >= 0)
+			break;
+		if (int_no < 0) {
+			pr_debug("%s: fail allocating msi interrupt\n",
+					__func__);
+		}
+		virq = irq_of_parse_and_map(msi_data->msi_dev, int_no);
+		if (!virq) {
+			dev_err(&dev->dev, "%s: fail mapping irq\n", __func__);
+			msi_bitmap_free_hwirqs(&msi_data->bitmap, int_no, 1);
+			return -ENOSPC;
+		}
+		dev_dbg(&dev->dev, "%s: virq = %d\n", __func__, virq);
+
+		/* Setup msi address space */
+		msg.address_hi = msi_data->msi_addr_hi;
+		msg.address_lo = msi_data->msi_addr_lo;
+
+		irq_set_msi_desc(virq, entry);
+		msg.data = int_no;
+		pci_write_msi_msg(virq, &msg);
+	}
+	return 0;
+}
+
+void ppc4xx_teardown_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_desc *entry;
+	struct ppc4xx_msi *msi_data = &ppc4xx_msi;
+	irq_hw_number_t hwirq;
+
+	dev_dbg(&dev->dev, "PCIE-MSI: tearing down msi irqs\n");
+
+	for_each_pci_msi_entry(entry, dev) {
+		if (!entry->irq)
+			continue;
+		hwirq = virq_to_hw(entry->irq);
+		irq_set_msi_desc(entry->irq, NULL);
+		irq_dispose_mapping(entry->irq);
+		msi_bitmap_free_hwirqs(&msi_data->bitmap, hwirq, 1);
+	}
+}
+
+static int ppc4xx_setup_pcieh_hw(struct platform_device *dev,
+				 struct resource res, struct ppc4xx_msi *msi)
+{
+	const u32 *msi_data;
+	const u32 *msi_mask;
+	const u32 *sdr_addr;
+	dma_addr_t msi_phys;
+	void *msi_virt;
+	int err;
+
+	sdr_addr = of_get_property(dev->dev.of_node, "sdr-base", NULL);
+	if (!sdr_addr)
+		return -EINVAL;
+
+	msi_data = of_get_property(dev->dev.of_node, "msi-data", NULL);
+	if (!msi_data)
+		return -EINVAL;
+
+	msi_mask = of_get_property(dev->dev.of_node, "msi-mask", NULL);
+	if (!msi_mask)
+		return -EINVAL;
+
+	msi->msi_dev = of_find_node_by_name(NULL, "ppc4xx-msi");
+	if (!msi->msi_dev)
+		return -ENODEV;
+
+	msi->msi_regs = of_iomap(msi->msi_dev, 0);
+	if (!msi->msi_regs) {
+		dev_err(&dev->dev, "of_iomap failed\n");
+		err = -ENOMEM;
+		goto node_put;
+	}
+	dev_dbg(&dev->dev, "PCIE-MSI: msi register mapped 0x%x 0x%x\n",
+		(u32) (msi->msi_regs + PEIH_TERMADH), (u32) (msi->msi_regs));
+
+	msi_virt = dma_alloc_coherent(&dev->dev, 64, &msi_phys, GFP_KERNEL);
+	if (!msi_virt) {
+		err = -ENOMEM;
+		goto iounmap;
+	}
+	msi->msi_addr_hi = upper_32_bits(msi_phys);
+	msi->msi_addr_lo = lower_32_bits(msi_phys & 0xffffffff);
+	dev_dbg(&dev->dev, "PCIE-MSI: msi address high 0x%x, low 0x%x\n",
+		msi->msi_addr_hi, msi->msi_addr_lo);
+
+	mtdcri(SDR0, *sdr_addr, upper_32_bits(res.start));	/*HIGH addr */
+	mtdcri(SDR0, *sdr_addr + 1, lower_32_bits(res.start));	/* Low addr */
+
+	/* Progam the Interrupt handler Termination addr registers */
+	out_be32(msi->msi_regs + PEIH_TERMADH, msi->msi_addr_hi);
+	out_be32(msi->msi_regs + PEIH_TERMADL, msi->msi_addr_lo);
+
+	/* Program MSI Expected data and Mask bits */
+	out_be32(msi->msi_regs + PEIH_MSIED, *msi_data);
+	out_be32(msi->msi_regs + PEIH_MSIMK, *msi_mask);
+
+	dma_free_coherent(&dev->dev, 64, msi_virt, msi_phys);
+
+	return 0;
+
+iounmap:
+	iounmap(msi->msi_regs);
+node_put:
+	of_node_put(msi->msi_dev);
+	return err;
+}
+
+static int ppc4xx_of_msi_remove(struct platform_device *dev)
+{
+	struct ppc4xx_msi *msi = dev->dev.platform_data;
+	int i;
+	int virq;
+
+	for (i = 0; i < msi_irqs; i++) {
+		virq = msi->msi_virqs[i];
+		if (virq)
+			irq_dispose_mapping(virq);
+	}
+
+	if (msi->bitmap.bitmap)
+		msi_bitmap_free(&msi->bitmap);
+	iounmap(msi->msi_regs);
+	of_node_put(msi->msi_dev);
+
+	return 0;
+}
+
+static int ppc4xx_msi_probe(struct platform_device *dev)
+{
+	struct ppc4xx_msi *msi;
+	struct resource res;
+	int err = 0;
+	struct pci_controller *phb;
+
+	dev_dbg(&dev->dev, "PCIE-MSI: Setting up MSI support...\n");
+
+	msi = devm_kzalloc(&dev->dev, sizeof(*msi), GFP_KERNEL);
+	if (!msi)
+		return -ENOMEM;
+	dev->dev.platform_data = msi;
+
+	/* Get MSI ranges */
+	err = of_address_to_resource(dev->dev.of_node, 0, &res);
+	if (err) {
+		dev_err(&dev->dev, "%pOF resource error!\n", dev->dev.of_node);
+		return err;
+	}
+
+	msi_irqs = of_irq_count(dev->dev.of_node);
+	if (!msi_irqs)
+		return -ENODEV;
+
+	err = ppc4xx_setup_pcieh_hw(dev, res, msi);
+	if (err)
+		return err;
+
+	err = ppc4xx_msi_init_allocator(dev, msi);
+	if (err) {
+		dev_err(&dev->dev, "Error allocating MSI bitmap\n");
+		goto error_out;
+	}
+	ppc4xx_msi = *msi;
+
+	list_for_each_entry(phb, &hose_list, list_node) {
+		phb->controller_ops.setup_msi_irqs = ppc4xx_setup_msi_irqs;
+		phb->controller_ops.teardown_msi_irqs = ppc4xx_teardown_msi_irqs;
+	}
+	return 0;
+
+error_out:
+	ppc4xx_of_msi_remove(dev);
+	return err;
+}
+static const struct of_device_id ppc4xx_msi_ids[] = {
+	{
+		.compatible = "amcc,ppc4xx-msi",
+	},
+	{}
+};
+static struct platform_driver ppc4xx_msi_driver = {
+	.probe = ppc4xx_msi_probe,
+	.remove = ppc4xx_of_msi_remove,
+	.driver = {
+		   .name = "ppc4xx-msi",
+		   .of_match_table = ppc4xx_msi_ids,
+		   },
+
+};
+
+static __init int ppc4xx_msi_init(void)
+{
+	return platform_driver_register(&ppc4xx_msi_driver);
+}
+
+subsys_initcall(ppc4xx_msi_init);
diff --git a/arch/powerpc/platforms/4xx/pci.c b/arch/powerpc/platforms/4xx/pci.c
new file mode 100644
index 000000000..c13d64c3b
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/pci.c
@@ -0,0 +1,2185 @@
+/*
+ * PCI / PCI-X / PCI-Express support for 4xx parts
+ *
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * Most PCI Express code is coming from Stefan Roese implementation for
+ * arch/ppc in the Denx tree, slightly reworked by me.
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * Some of that comes itself from a previous implementation for 440SPE only
+ * by Roland Dreier:
+ *
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <mm/mmu_decl.h>
+
+#include "pci.h"
+
+static int dma_offset_set;
+
+#define U64_TO_U32_LOW(val)	((u32)((val) & 0x00000000ffffffffULL))
+#define U64_TO_U32_HIGH(val)	((u32)((val) >> 32))
+
+#define RES_TO_U32_LOW(val)	\
+	((sizeof(resource_size_t) > sizeof(u32)) ? U64_TO_U32_LOW(val) : (val))
+#define RES_TO_U32_HIGH(val)	\
+	((sizeof(resource_size_t) > sizeof(u32)) ? U64_TO_U32_HIGH(val) : (0))
+
+static inline int ppc440spe_revA(void)
+{
+	/* Catch both 440SPe variants, with and without RAID6 support */
+        if ((mfspr(SPRN_PVR) & 0xffefffff) == 0x53421890)
+                return 1;
+        else
+                return 0;
+}
+
+static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+	int i;
+
+	if (dev->devfn != 0 || dev->bus->self != NULL)
+		return;
+
+	hose = pci_bus_to_host(dev->bus);
+	if (hose == NULL)
+		return;
+
+	if (!of_device_is_compatible(hose->dn, "ibm,plb-pciex") &&
+	    !of_device_is_compatible(hose->dn, "ibm,plb-pcix") &&
+	    !of_device_is_compatible(hose->dn, "ibm,plb-pci"))
+		return;
+
+	if (of_device_is_compatible(hose->dn, "ibm,plb440epx-pci") ||
+		of_device_is_compatible(hose->dn, "ibm,plb440grx-pci")) {
+		hose->indirect_type |= PPC_INDIRECT_TYPE_BROKEN_MRM;
+	}
+
+	/* Hide the PCI host BARs from the kernel as their content doesn't
+	 * fit well in the resource management
+	 */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		dev->resource[i].start = dev->resource[i].end = 0;
+		dev->resource[i].flags = 0;
+	}
+
+	printk(KERN_INFO "PCI: Hiding 4xx host bridge resources %s\n",
+	       pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_ppc4xx_pci_bridge);
+
+static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
+					  void __iomem *reg,
+					  struct resource *res)
+{
+	u64 size;
+	const u32 *ranges;
+	int rlen;
+	int pna = of_n_addr_cells(hose->dn);
+	int np = pna + 5;
+
+	/* Default */
+	res->start = 0;
+	size = 0x80000000;
+	res->end = size - 1;
+	res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+
+	/* Get dma-ranges property */
+	ranges = of_get_property(hose->dn, "dma-ranges", &rlen);
+	if (ranges == NULL)
+		goto out;
+
+	/* Walk it */
+	while ((rlen -= np * 4) >= 0) {
+		u32 pci_space = ranges[0];
+		u64 pci_addr = of_read_number(ranges + 1, 2);
+		u64 cpu_addr = of_translate_dma_address(hose->dn, ranges + 3);
+		size = of_read_number(ranges + pna + 3, 2);
+		ranges += np;
+		if (cpu_addr == OF_BAD_ADDR || size == 0)
+			continue;
+
+		/* We only care about memory */
+		if ((pci_space & 0x03000000) != 0x02000000)
+			continue;
+
+		/* We currently only support memory at 0, and pci_addr
+		 * within 32 bits space
+		 */
+		if (cpu_addr != 0 || pci_addr > 0xffffffff) {
+			printk(KERN_WARNING "%pOF: Ignored unsupported dma range"
+			       " 0x%016llx...0x%016llx -> 0x%016llx\n",
+			       hose->dn,
+			       pci_addr, pci_addr + size - 1, cpu_addr);
+			continue;
+		}
+
+		/* Check if not prefetchable */
+		if (!(pci_space & 0x40000000))
+			res->flags &= ~IORESOURCE_PREFETCH;
+
+
+		/* Use that */
+		res->start = pci_addr;
+		/* Beware of 32 bits resources */
+		if (sizeof(resource_size_t) == sizeof(u32) &&
+		    (pci_addr + size) > 0x100000000ull)
+			res->end = 0xffffffff;
+		else
+			res->end = res->start + size - 1;
+		break;
+	}
+
+	/* We only support one global DMA offset */
+	if (dma_offset_set && pci_dram_offset != res->start) {
+		printk(KERN_ERR "%pOF: dma-ranges(s) mismatch\n", hose->dn);
+		return -ENXIO;
+	}
+
+	/* Check that we can fit all of memory as we don't support
+	 * DMA bounce buffers
+	 */
+	if (size < total_memory) {
+		printk(KERN_ERR "%pOF: dma-ranges too small "
+		       "(size=%llx total_memory=%llx)\n",
+		       hose->dn, size, (u64)total_memory);
+		return -ENXIO;
+	}
+
+	/* Check we are a power of 2 size and that base is a multiple of size*/
+	if ((size & (size - 1)) != 0  ||
+	    (res->start & (size - 1)) != 0) {
+		printk(KERN_ERR "%pOF: dma-ranges unaligned\n", hose->dn);
+		return -ENXIO;
+	}
+
+	/* Check that we are fully contained within 32 bits space if we are not
+	 * running on a 460sx or 476fpe which have 64 bit bus addresses.
+	 */
+	if (res->end > 0xffffffff &&
+	    !(of_device_is_compatible(hose->dn, "ibm,plb-pciex-460sx")
+	      || of_device_is_compatible(hose->dn, "ibm,plb-pciex-476fpe"))) {
+		printk(KERN_ERR "%pOF: dma-ranges outside of 32 bits space\n",
+		       hose->dn);
+		return -ENXIO;
+	}
+ out:
+	dma_offset_set = 1;
+	pci_dram_offset = res->start;
+	hose->dma_window_base_cur = res->start;
+	hose->dma_window_size = resource_size(res);
+
+	printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n",
+	       pci_dram_offset);
+	printk(KERN_INFO "4xx PCI DMA window base to 0x%016llx\n",
+	       (unsigned long long)hose->dma_window_base_cur);
+	printk(KERN_INFO "DMA window size 0x%016llx\n",
+	       (unsigned long long)hose->dma_window_size);
+	return 0;
+}
+
+/*
+ * 4xx PCI 2.x part
+ */
+
+static int __init ppc4xx_setup_one_pci_PMM(struct pci_controller	*hose,
+					   void __iomem			*reg,
+					   u64				plb_addr,
+					   u64				pci_addr,
+					   u64				size,
+					   unsigned int			flags,
+					   int				index)
+{
+	u32 ma, pcila, pciha;
+
+	/* Hack warning ! The "old" PCI 2.x cell only let us configure the low
+	 * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit
+	 * address are actually hard wired to a value that appears to depend
+	 * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx.
+	 *
+	 * The trick here is we just crop those top bits and ignore them when
+	 * programming the chip. That means the device-tree has to be right
+	 * for the specific part used (we don't print a warning if it's wrong
+	 * but on the other hand, you'll crash quickly enough), but at least
+	 * this code should work whatever the hard coded value is
+	 */
+	plb_addr &= 0xffffffffull;
+
+	/* Note: Due to the above hack, the test below doesn't actually test
+	 * if you address is above 4G, but it tests that address and
+	 * (address + size) are both contained in the same 4G
+	 */
+	if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) ||
+	    size < 0x1000 || (plb_addr & (size - 1)) != 0) {
+		printk(KERN_WARNING "%pOF: Resource out of range\n", hose->dn);
+		return -1;
+	}
+	ma = (0xffffffffu << ilog2(size)) | 1;
+	if (flags & IORESOURCE_PREFETCH)
+		ma |= 2;
+
+	pciha = RES_TO_U32_HIGH(pci_addr);
+	pcila = RES_TO_U32_LOW(pci_addr);
+
+	writel(plb_addr, reg + PCIL0_PMM0LA + (0x10 * index));
+	writel(pcila, reg + PCIL0_PMM0PCILA + (0x10 * index));
+	writel(pciha, reg + PCIL0_PMM0PCIHA + (0x10 * index));
+	writel(ma, reg + PCIL0_PMM0MA + (0x10 * index));
+
+	return 0;
+}
+
+static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,
+					     void __iomem *reg)
+{
+	int i, j, found_isa_hole = 0;
+
+	/* Setup outbound memory windows */
+	for (i = j = 0; i < 3; i++) {
+		struct resource *res = &hose->mem_resources[i];
+		resource_size_t offset = hose->mem_offset[i];
+
+		/* we only care about memory windows */
+		if (!(res->flags & IORESOURCE_MEM))
+			continue;
+		if (j > 2) {
+			printk(KERN_WARNING "%pOF: Too many ranges\n", hose->dn);
+			break;
+		}
+
+		/* Configure the resource */
+		if (ppc4xx_setup_one_pci_PMM(hose, reg,
+					     res->start,
+					     res->start - offset,
+					     resource_size(res),
+					     res->flags,
+					     j) == 0) {
+			j++;
+
+			/* If the resource PCI address is 0 then we have our
+			 * ISA memory hole
+			 */
+			if (res->start == offset)
+				found_isa_hole = 1;
+		}
+	}
+
+	/* Handle ISA memory hole if not already covered */
+	if (j <= 2 && !found_isa_hole && hose->isa_mem_size)
+		if (ppc4xx_setup_one_pci_PMM(hose, reg, hose->isa_mem_phys, 0,
+					     hose->isa_mem_size, 0, j) == 0)
+			printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n",
+			       hose->dn);
+}
+
+static void __init ppc4xx_configure_pci_PTMs(struct pci_controller *hose,
+					     void __iomem *reg,
+					     const struct resource *res)
+{
+	resource_size_t size = resource_size(res);
+	u32 sa;
+
+	/* Calculate window size */
+	sa = (0xffffffffu << ilog2(size)) | 1;
+	sa |= 0x1;
+
+	/* RAM is always at 0 local for now */
+	writel(0, reg + PCIL0_PTM1LA);
+	writel(sa, reg + PCIL0_PTM1MS);
+
+	/* Map on PCI side */
+	early_write_config_dword(hose, hose->first_busno, 0,
+				 PCI_BASE_ADDRESS_1, res->start);
+	early_write_config_dword(hose, hose->first_busno, 0,
+				 PCI_BASE_ADDRESS_2, 0x00000000);
+	early_write_config_word(hose, hose->first_busno, 0,
+				PCI_COMMAND, 0x0006);
+}
+
+static void __init ppc4xx_probe_pci_bridge(struct device_node *np)
+{
+	/* NYI */
+	struct resource rsrc_cfg;
+	struct resource rsrc_reg;
+	struct resource dma_window;
+	struct pci_controller *hose = NULL;
+	void __iomem *reg = NULL;
+	const int *bus_range;
+	int primary = 0;
+
+	/* Check if device is enabled */
+	if (!of_device_is_available(np)) {
+		printk(KERN_INFO "%pOF: Port disabled via device-tree\n", np);
+		return;
+	}
+
+	/* Fetch config space registers address */
+	if (of_address_to_resource(np, 0, &rsrc_cfg)) {
+		printk(KERN_ERR "%pOF: Can't get PCI config register base !",
+		       np);
+		return;
+	}
+	/* Fetch host bridge internal registers address */
+	if (of_address_to_resource(np, 3, &rsrc_reg)) {
+		printk(KERN_ERR "%pOF: Can't get PCI internal register base !",
+		       np);
+		return;
+	}
+
+	/* Check if primary bridge */
+	if (of_get_property(np, "primary", NULL))
+		primary = 1;
+
+	/* Get bus range if any */
+	bus_range = of_get_property(np, "bus-range", NULL);
+
+	/* Map registers */
+	reg = ioremap(rsrc_reg.start, resource_size(&rsrc_reg));
+	if (reg == NULL) {
+		printk(KERN_ERR "%pOF: Can't map registers !", np);
+		goto fail;
+	}
+
+	/* Allocate the host controller data structure */
+	hose = pcibios_alloc_controller(np);
+	if (!hose)
+		goto fail;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0x0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	/* Setup config space */
+	setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0);
+
+	/* Disable all windows */
+	writel(0, reg + PCIL0_PMM0MA);
+	writel(0, reg + PCIL0_PMM1MA);
+	writel(0, reg + PCIL0_PMM2MA);
+	writel(0, reg + PCIL0_PTM1MS);
+	writel(0, reg + PCIL0_PTM2MS);
+
+	/* Parse outbound mapping resources */
+	pci_process_bridge_OF_ranges(hose, np, primary);
+
+	/* Parse inbound mapping resources */
+	if (ppc4xx_parse_dma_ranges(hose, reg, &dma_window) != 0)
+		goto fail;
+
+	/* Configure outbound ranges POMs */
+	ppc4xx_configure_pci_PMMs(hose, reg);
+
+	/* Configure inbound ranges PIMs */
+	ppc4xx_configure_pci_PTMs(hose, reg, &dma_window);
+
+	/* We don't need the registers anymore */
+	iounmap(reg);
+	return;
+
+ fail:
+	if (hose)
+		pcibios_free_controller(hose);
+	if (reg)
+		iounmap(reg);
+}
+
+/*
+ * 4xx PCI-X part
+ */
+
+static int __init ppc4xx_setup_one_pcix_POM(struct pci_controller	*hose,
+					    void __iomem		*reg,
+					    u64				plb_addr,
+					    u64				pci_addr,
+					    u64				size,
+					    unsigned int		flags,
+					    int				index)
+{
+	u32 lah, lal, pciah, pcial, sa;
+
+	if (!is_power_of_2(size) || size < 0x1000 ||
+	    (plb_addr & (size - 1)) != 0) {
+		printk(KERN_WARNING "%pOF: Resource out of range\n",
+		       hose->dn);
+		return -1;
+	}
+
+	/* Calculate register values */
+	lah = RES_TO_U32_HIGH(plb_addr);
+	lal = RES_TO_U32_LOW(plb_addr);
+	pciah = RES_TO_U32_HIGH(pci_addr);
+	pcial = RES_TO_U32_LOW(pci_addr);
+	sa = (0xffffffffu << ilog2(size)) | 0x1;
+
+	/* Program register values */
+	if (index == 0) {
+		writel(lah, reg + PCIX0_POM0LAH);
+		writel(lal, reg + PCIX0_POM0LAL);
+		writel(pciah, reg + PCIX0_POM0PCIAH);
+		writel(pcial, reg + PCIX0_POM0PCIAL);
+		writel(sa, reg + PCIX0_POM0SA);
+	} else {
+		writel(lah, reg + PCIX0_POM1LAH);
+		writel(lal, reg + PCIX0_POM1LAL);
+		writel(pciah, reg + PCIX0_POM1PCIAH);
+		writel(pcial, reg + PCIX0_POM1PCIAL);
+		writel(sa, reg + PCIX0_POM1SA);
+	}
+
+	return 0;
+}
+
+static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,
+					      void __iomem *reg)
+{
+	int i, j, found_isa_hole = 0;
+
+	/* Setup outbound memory windows */
+	for (i = j = 0; i < 3; i++) {
+		struct resource *res = &hose->mem_resources[i];
+		resource_size_t offset = hose->mem_offset[i];
+
+		/* we only care about memory windows */
+		if (!(res->flags & IORESOURCE_MEM))
+			continue;
+		if (j > 1) {
+			printk(KERN_WARNING "%pOF: Too many ranges\n", hose->dn);
+			break;
+		}
+
+		/* Configure the resource */
+		if (ppc4xx_setup_one_pcix_POM(hose, reg,
+					      res->start,
+					      res->start - offset,
+					      resource_size(res),
+					      res->flags,
+					      j) == 0) {
+			j++;
+
+			/* If the resource PCI address is 0 then we have our
+			 * ISA memory hole
+			 */
+			if (res->start == offset)
+				found_isa_hole = 1;
+		}
+	}
+
+	/* Handle ISA memory hole if not already covered */
+	if (j <= 1 && !found_isa_hole && hose->isa_mem_size)
+		if (ppc4xx_setup_one_pcix_POM(hose, reg, hose->isa_mem_phys, 0,
+					      hose->isa_mem_size, 0, j) == 0)
+			printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n",
+			       hose->dn);
+}
+
+static void __init ppc4xx_configure_pcix_PIMs(struct pci_controller *hose,
+					      void __iomem *reg,
+					      const struct resource *res,
+					      int big_pim,
+					      int enable_msi_hole)
+{
+	resource_size_t size = resource_size(res);
+	u32 sa;
+
+	/* RAM is always at 0 */
+	writel(0x00000000, reg + PCIX0_PIM0LAH);
+	writel(0x00000000, reg + PCIX0_PIM0LAL);
+
+	/* Calculate window size */
+	sa = (0xffffffffu << ilog2(size)) | 1;
+	sa |= 0x1;
+	if (res->flags & IORESOURCE_PREFETCH)
+		sa |= 0x2;
+	if (enable_msi_hole)
+		sa |= 0x4;
+	writel(sa, reg + PCIX0_PIM0SA);
+	if (big_pim)
+		writel(0xffffffff, reg + PCIX0_PIM0SAH);
+
+	/* Map on PCI side */
+	writel(0x00000000, reg + PCIX0_BAR0H);
+	writel(res->start, reg + PCIX0_BAR0L);
+	writew(0x0006, reg + PCIX0_COMMAND);
+}
+
+static void __init ppc4xx_probe_pcix_bridge(struct device_node *np)
+{
+	struct resource rsrc_cfg;
+	struct resource rsrc_reg;
+	struct resource dma_window;
+	struct pci_controller *hose = NULL;
+	void __iomem *reg = NULL;
+	const int *bus_range;
+	int big_pim = 0, msi = 0, primary = 0;
+
+	/* Fetch config space registers address */
+	if (of_address_to_resource(np, 0, &rsrc_cfg)) {
+		printk(KERN_ERR "%pOF: Can't get PCI-X config register base !",
+		       np);
+		return;
+	}
+	/* Fetch host bridge internal registers address */
+	if (of_address_to_resource(np, 3, &rsrc_reg)) {
+		printk(KERN_ERR "%pOF: Can't get PCI-X internal register base !",
+		       np);
+		return;
+	}
+
+	/* Check if it supports large PIMs (440GX) */
+	if (of_get_property(np, "large-inbound-windows", NULL))
+		big_pim = 1;
+
+	/* Check if we should enable MSIs inbound hole */
+	if (of_get_property(np, "enable-msi-hole", NULL))
+		msi = 1;
+
+	/* Check if primary bridge */
+	if (of_get_property(np, "primary", NULL))
+		primary = 1;
+
+	/* Get bus range if any */
+	bus_range = of_get_property(np, "bus-range", NULL);
+
+	/* Map registers */
+	reg = ioremap(rsrc_reg.start, resource_size(&rsrc_reg));
+	if (reg == NULL) {
+		printk(KERN_ERR "%pOF: Can't map registers !", np);
+		goto fail;
+	}
+
+	/* Allocate the host controller data structure */
+	hose = pcibios_alloc_controller(np);
+	if (!hose)
+		goto fail;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0x0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	/* Setup config space */
+	setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4,
+					PPC_INDIRECT_TYPE_SET_CFG_TYPE);
+
+	/* Disable all windows */
+	writel(0, reg + PCIX0_POM0SA);
+	writel(0, reg + PCIX0_POM1SA);
+	writel(0, reg + PCIX0_POM2SA);
+	writel(0, reg + PCIX0_PIM0SA);
+	writel(0, reg + PCIX0_PIM1SA);
+	writel(0, reg + PCIX0_PIM2SA);
+	if (big_pim) {
+		writel(0, reg + PCIX0_PIM0SAH);
+		writel(0, reg + PCIX0_PIM2SAH);
+	}
+
+	/* Parse outbound mapping resources */
+	pci_process_bridge_OF_ranges(hose, np, primary);
+
+	/* Parse inbound mapping resources */
+	if (ppc4xx_parse_dma_ranges(hose, reg, &dma_window) != 0)
+		goto fail;
+
+	/* Configure outbound ranges POMs */
+	ppc4xx_configure_pcix_POMs(hose, reg);
+
+	/* Configure inbound ranges PIMs */
+	ppc4xx_configure_pcix_PIMs(hose, reg, &dma_window, big_pim, msi);
+
+	/* We don't need the registers anymore */
+	iounmap(reg);
+	return;
+
+ fail:
+	if (hose)
+		pcibios_free_controller(hose);
+	if (reg)
+		iounmap(reg);
+}
+
+#ifdef CONFIG_PPC4xx_PCI_EXPRESS
+
+/*
+ * 4xx PCI-Express part
+ *
+ * We support 3 parts currently based on the compatible property:
+ *
+ * ibm,plb-pciex-440spe
+ * ibm,plb-pciex-405ex
+ * ibm,plb-pciex-460ex
+ *
+ * Anything else will be rejected for now as they are all subtly
+ * different unfortunately.
+ *
+ */
+
+#define MAX_PCIE_BUS_MAPPED	0x40
+
+struct ppc4xx_pciex_port
+{
+	struct pci_controller	*hose;
+	struct device_node	*node;
+	unsigned int		index;
+	int			endpoint;
+	int			link;
+	int			has_ibpre;
+	unsigned int		sdr_base;
+	dcr_host_t		dcrs;
+	struct resource		cfg_space;
+	struct resource		utl_regs;
+	void __iomem		*utl_base;
+};
+
+static struct ppc4xx_pciex_port *ppc4xx_pciex_ports;
+static unsigned int ppc4xx_pciex_port_count;
+
+struct ppc4xx_pciex_hwops
+{
+	bool want_sdr;
+	int (*core_init)(struct device_node *np);
+	int (*port_init_hw)(struct ppc4xx_pciex_port *port);
+	int (*setup_utl)(struct ppc4xx_pciex_port *port);
+	void (*check_link)(struct ppc4xx_pciex_port *port);
+};
+
+static struct ppc4xx_pciex_hwops *ppc4xx_pciex_hwops;
+
+static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port,
+					   unsigned int sdr_offset,
+					   unsigned int mask,
+					   unsigned int value,
+					   int timeout_ms)
+{
+	u32 val;
+
+	while(timeout_ms--) {
+		val = mfdcri(SDR0, port->sdr_base + sdr_offset);
+		if ((val & mask) == value) {
+			pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n",
+				 port->index, sdr_offset, timeout_ms, val);
+			return 0;
+		}
+		msleep(1);
+	}
+	return -1;
+}
+
+static int __init ppc4xx_pciex_port_reset_sdr(struct ppc4xx_pciex_port *port)
+{
+	/* Wait for reset to complete */
+	if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) {
+		printk(KERN_WARNING "PCIE%d: PGRST failed\n",
+		       port->index);
+		return -1;
+	}
+	return 0;
+}
+
+
+static void __init ppc4xx_pciex_check_link_sdr(struct ppc4xx_pciex_port *port)
+{
+	printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
+
+	/* Check for card presence detect if supported, if not, just wait for
+	 * link unconditionally.
+	 *
+	 * note that we don't fail if there is no link, we just filter out
+	 * config space accesses. That way, it will be easier to implement
+	 * hotplug later on.
+	 */
+	if (!port->has_ibpre ||
+	    !ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
+				      1 << 28, 1 << 28, 100)) {
+		printk(KERN_INFO
+		       "PCIE%d: Device detected, waiting for link...\n",
+		       port->index);
+		if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
+					     0x1000, 0x1000, 2000))
+			printk(KERN_WARNING
+			       "PCIE%d: Link up failed\n", port->index);
+		else {
+			printk(KERN_INFO
+			       "PCIE%d: link is up !\n", port->index);
+			port->link = 1;
+		}
+	} else
+		printk(KERN_INFO "PCIE%d: No device detected.\n", port->index);
+}
+
+#ifdef CONFIG_44x
+
+/* Check various reset bits of the 440SPe PCIe core */
+static int __init ppc440spe_pciex_check_reset(struct device_node *np)
+{
+	u32 valPE0, valPE1, valPE2;
+	int err = 0;
+
+	/* SDR0_PEGPLLLCT1 reset */
+	if (!(mfdcri(SDR0, PESDR0_PLLLCT1) & 0x01000000)) {
+		/*
+		 * the PCIe core was probably already initialised
+		 * by firmware - let's re-reset RCSSET regs
+		 *
+		 * -- Shouldn't we also re-reset the whole thing ? -- BenH
+		 */
+		pr_debug("PCIE: SDR0_PLLLCT1 already reset.\n");
+		mtdcri(SDR0, PESDR0_440SPE_RCSSET, 0x01010000);
+		mtdcri(SDR0, PESDR1_440SPE_RCSSET, 0x01010000);
+		mtdcri(SDR0, PESDR2_440SPE_RCSSET, 0x01010000);
+	}
+
+	valPE0 = mfdcri(SDR0, PESDR0_440SPE_RCSSET);
+	valPE1 = mfdcri(SDR0, PESDR1_440SPE_RCSSET);
+	valPE2 = mfdcri(SDR0, PESDR2_440SPE_RCSSET);
+
+	/* SDR0_PExRCSSET rstgu */
+	if (!(valPE0 & 0x01000000) ||
+	    !(valPE1 & 0x01000000) ||
+	    !(valPE2 & 0x01000000)) {
+		printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET rstdl */
+	if (!(valPE0 & 0x00010000) ||
+	    !(valPE1 & 0x00010000) ||
+	    !(valPE2 & 0x00010000)) {
+		printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET rstpyn */
+	if ((valPE0 & 0x00001000) ||
+	    (valPE1 & 0x00001000) ||
+	    (valPE2 & 0x00001000)) {
+		printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET hldplb */
+	if ((valPE0 & 0x10000000) ||
+	    (valPE1 & 0x10000000) ||
+	    (valPE2 & 0x10000000)) {
+		printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET rdy */
+	if ((valPE0 & 0x00100000) ||
+	    (valPE1 & 0x00100000) ||
+	    (valPE2 & 0x00100000)) {
+		printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET shutdown */
+	if ((valPE0 & 0x00000100) ||
+	    (valPE1 & 0x00000100) ||
+	    (valPE2 & 0x00000100)) {
+		printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n");
+		err = -1;
+	}
+
+	return err;
+}
+
+/* Global PCIe core initializations for 440SPe core */
+static int __init ppc440spe_pciex_core_init(struct device_node *np)
+{
+	int time_out = 20;
+
+	/* Set PLL clock receiver to LVPECL */
+	dcri_clrset(SDR0, PESDR0_PLLLCT1, 0, 1 << 28);
+
+	/* Shouldn't we do all the calibration stuff etc... here ? */
+	if (ppc440spe_pciex_check_reset(np))
+		return -ENXIO;
+
+	if (!(mfdcri(SDR0, PESDR0_PLLLCT2) & 0x10000)) {
+		printk(KERN_INFO "PCIE: PESDR_PLLCT2 resistance calibration "
+		       "failed (0x%08x)\n",
+		       mfdcri(SDR0, PESDR0_PLLLCT2));
+		return -1;
+	}
+
+	/* De-assert reset of PCIe PLL, wait for lock */
+	dcri_clrset(SDR0, PESDR0_PLLLCT1, 1 << 24, 0);
+	udelay(3);
+
+	while (time_out) {
+		if (!(mfdcri(SDR0, PESDR0_PLLLCT3) & 0x10000000)) {
+			time_out--;
+			udelay(1);
+		} else
+			break;
+	}
+	if (!time_out) {
+		printk(KERN_INFO "PCIE: VCO output not locked\n");
+		return -1;
+	}
+
+	pr_debug("PCIE initialization OK\n");
+
+	return 3;
+}
+
+static int __init ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+	u32 val = 1 << 24;
+
+	if (port->endpoint)
+		val = PTYPE_LEGACY_ENDPOINT << 20;
+	else
+		val = PTYPE_ROOT_PORT << 20;
+
+	if (port->index == 0)
+		val |= LNKW_X8 << 12;
+	else
+		val |= LNKW_X4 << 12;
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x20222222);
+	if (ppc440spe_revA())
+		mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x11000000);
+	mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL0SET1, 0x35000000);
+	mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL1SET1, 0x35000000);
+	mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL2SET1, 0x35000000);
+	mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL3SET1, 0x35000000);
+	if (port->index == 0) {
+		mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL4SET1,
+		       0x35000000);
+		mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL5SET1,
+		       0x35000000);
+		mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL6SET1,
+		       0x35000000);
+		mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
+		       0x35000000);
+	}
+	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+			(1 << 24) | (1 << 16), 1 << 12);
+
+	return ppc4xx_pciex_port_reset_sdr(port);
+}
+
+static int __init ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+	return ppc440spe_pciex_init_port_hw(port);
+}
+
+static int __init ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+	int rc = ppc440spe_pciex_init_port_hw(port);
+
+	port->has_ibpre = 1;
+
+	return rc;
+}
+
+static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+	/* XXX Check what that value means... I hate magic */
+	dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x68782800);
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32(port->utl_base + PEUTL_OUTTR,   0x08000000);
+	out_be32(port->utl_base + PEUTL_INTR,    0x02000000);
+	out_be32(port->utl_base + PEUTL_OPDBSZ,  0x10000000);
+	out_be32(port->utl_base + PEUTL_PBBSZ,   0x53000000);
+	out_be32(port->utl_base + PEUTL_IPHBSZ,  0x08000000);
+	out_be32(port->utl_base + PEUTL_IPDBSZ,  0x10000000);
+	out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000);
+	out_be32(port->utl_base + PEUTL_PCTL,    0x80800066);
+
+	return 0;
+}
+
+static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+	/* Report CRS to the operating system */
+	out_be32(port->utl_base + PEUTL_PBCTL,    0x08000000);
+
+	return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
+{
+	.want_sdr	= true,
+	.core_init	= ppc440spe_pciex_core_init,
+	.port_init_hw	= ppc440speA_pciex_init_port_hw,
+	.setup_utl	= ppc440speA_pciex_init_utl,
+	.check_link	= ppc4xx_pciex_check_link_sdr,
+};
+
+static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
+{
+	.want_sdr	= true,
+	.core_init	= ppc440spe_pciex_core_init,
+	.port_init_hw	= ppc440speB_pciex_init_port_hw,
+	.setup_utl	= ppc440speB_pciex_init_utl,
+	.check_link	= ppc4xx_pciex_check_link_sdr,
+};
+
+static int __init ppc460ex_pciex_core_init(struct device_node *np)
+{
+	/* Nothing to do, return 2 ports */
+	return 2;
+}
+
+static int __init ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+	u32 val;
+	u32 utlset1;
+
+	if (port->endpoint)
+		val = PTYPE_LEGACY_ENDPOINT << 20;
+	else
+		val = PTYPE_ROOT_PORT << 20;
+
+	if (port->index == 0) {
+		val |= LNKW_X1 << 12;
+		utlset1 = 0x20000000;
+	} else {
+		val |= LNKW_X4 << 12;
+		utlset1 = 0x20101101;
+	}
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1);
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01210000);
+
+	switch (port->index) {
+	case 0:
+		mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
+		mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000);
+		break;
+
+	case 1:
+		mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000130);
+		mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000130);
+		mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000130);
+		mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000130);
+		mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
+		mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
+		mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
+		mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006);
+
+		mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST,0x10000000);
+		break;
+	}
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+	       mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+	       (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+	/* Poll for PHY reset */
+	/* XXX FIXME add timeout */
+	switch (port->index) {
+	case 0:
+		while (!(mfdcri(SDR0, PESDR0_460EX_RSTSTA) & 0x1))
+			udelay(10);
+		break;
+	case 1:
+		while (!(mfdcri(SDR0, PESDR1_460EX_RSTSTA) & 0x1))
+			udelay(10);
+		break;
+	}
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+	       (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+		~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+	       PESDRx_RCSSET_RSTPYN);
+
+	port->has_ibpre = 1;
+
+	return ppc4xx_pciex_port_reset_sdr(port);
+}
+
+static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+	dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32(port->utl_base + PEUTL_PBCTL,	0x0800000c);
+	out_be32(port->utl_base + PEUTL_OUTTR,	0x08000000);
+	out_be32(port->utl_base + PEUTL_INTR,	0x02000000);
+	out_be32(port->utl_base + PEUTL_OPDBSZ,	0x04000000);
+	out_be32(port->utl_base + PEUTL_PBBSZ,	0x00000000);
+	out_be32(port->utl_base + PEUTL_IPHBSZ,	0x02000000);
+	out_be32(port->utl_base + PEUTL_IPDBSZ,	0x04000000);
+	out_be32(port->utl_base + PEUTL_RCIRQEN,0x00f00000);
+	out_be32(port->utl_base + PEUTL_PCTL,	0x80800066);
+
+	return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
+{
+	.want_sdr	= true,
+	.core_init	= ppc460ex_pciex_core_init,
+	.port_init_hw	= ppc460ex_pciex_init_port_hw,
+	.setup_utl	= ppc460ex_pciex_init_utl,
+	.check_link	= ppc4xx_pciex_check_link_sdr,
+};
+
+static int __init apm821xx_pciex_core_init(struct device_node *np)
+{
+	/* Return the number of pcie port */
+	return 1;
+}
+
+static int __init apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+	u32 val;
+
+	/*
+	 * Do a software reset on PCIe ports.
+	 * This code is to fix the issue that pci drivers doesn't re-assign
+	 * bus number for PCIE devices after Uboot
+	 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
+	 * PT quad port, SAS LSI 1064E)
+	 */
+
+	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
+	mdelay(10);
+
+	if (port->endpoint)
+		val = PTYPE_LEGACY_ENDPOINT << 20;
+	else
+		val = PTYPE_ROOT_PORT << 20;
+
+	val |= LNKW_X1 << 12;
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000);
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
+
+	mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+	mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
+	mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
+	mdelay(50);
+	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+		mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+		(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+	/* Poll for PHY reset */
+	val = PESDR0_460EX_RSTSTA - port->sdr_base;
+	if (ppc4xx_pciex_wait_on_sdr(port, val, 0x1, 1,	100)) {
+		printk(KERN_WARNING "%s: PCIE: Can't reset PHY\n", __func__);
+		return -EBUSY;
+	} else {
+		mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+			(mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+			~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+			PESDRx_RCSSET_RSTPYN);
+
+		port->has_ibpre = 1;
+		return 0;
+	}
+}
+
+static struct ppc4xx_pciex_hwops apm821xx_pcie_hwops __initdata = {
+	.want_sdr   = true,
+	.core_init	= apm821xx_pciex_core_init,
+	.port_init_hw	= apm821xx_pciex_init_port_hw,
+	.setup_utl	= ppc460ex_pciex_init_utl,
+	.check_link = ppc4xx_pciex_check_link_sdr,
+};
+
+static int __init ppc460sx_pciex_core_init(struct device_node *np)
+{
+	/* HSS drive amplitude */
+	mtdcri(SDR0, PESDR0_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL3DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL4DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL5DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL6DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL7DAMP, 0xB9843211);
+
+	mtdcri(SDR0, PESDR1_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL3DAMP, 0xB9843211);
+
+	mtdcri(SDR0, PESDR2_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL3DAMP, 0xB9843211);
+
+	/* HSS TX pre-emphasis */
+	mtdcri(SDR0, PESDR0_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL3COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL4COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL5COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL6COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL7COEFA, 0xDCB98987);
+
+	mtdcri(SDR0, PESDR1_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL3COEFA, 0xDCB98987);
+
+	mtdcri(SDR0, PESDR2_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL3COEFA, 0xDCB98987);
+
+	/* HSS TX calibration control */
+	mtdcri(SDR0, PESDR0_460SX_HSSL1CALDRV, 0x22222222);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1CALDRV, 0x22220000);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1CALDRV, 0x22220000);
+
+	/* HSS TX slew control */
+	mtdcri(SDR0, PESDR0_460SX_HSSSLEW, 0xFFFFFFFF);
+	mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
+	mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
+
+	/* Set HSS PRBS enabled */
+	mtdcri(SDR0, PESDR0_460SX_HSSCTLSET, 0x00001130);
+	mtdcri(SDR0, PESDR2_460SX_HSSCTLSET, 0x00001130);
+
+	udelay(100);
+
+	/* De-assert PLLRESET */
+	dcri_clrset(SDR0, PESDR0_PLLLCT2, 0x00000100, 0);
+
+	/* Reset DL, UTL, GPL before configuration */
+	mtdcri(SDR0, PESDR0_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+	mtdcri(SDR0, PESDR1_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+	mtdcri(SDR0, PESDR2_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+
+	udelay(100);
+
+	/*
+	 * If bifurcation is not enabled, u-boot would have disabled the
+	 * third PCIe port
+	 */
+	if (((mfdcri(SDR0, PESDR1_460SX_HSSCTLSET) & 0x00000001) ==
+				0x00000001)) {
+		printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n");
+		printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n");
+		return 3;
+	}
+
+	printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n");
+	return 2;
+}
+
+static int __init ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+
+	if (port->endpoint)
+		dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+				0x01000000, 0);
+	else
+		dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+				0, 0x01000000);
+
+	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+			(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
+			PESDRx_RCSSET_RSTPYN);
+
+	port->has_ibpre = 1;
+
+	return ppc4xx_pciex_port_reset_sdr(port);
+}
+
+static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+	/* Max 128 Bytes */
+	out_be32 (port->utl_base + PEUTL_PBBSZ,   0x00000000);
+	/* Assert VRB and TXE - per datasheet turn off addr validation */
+	out_be32(port->utl_base + PEUTL_PCTL,  0x80800000);
+	return 0;
+}
+
+static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+	void __iomem *mbase;
+	int attempt = 50;
+
+	port->link = 0;
+
+	mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+	if (mbase == NULL) {
+		printk(KERN_ERR "%pOF: Can't map internal config space !",
+			port->node);
+		return;
+	}
+
+	while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA)
+			& PECFG_460SX_DLLSTA_LINKUP))) {
+		attempt--;
+		mdelay(10);
+	}
+	if (attempt)
+		port->link = 1;
+	iounmap(mbase);
+}
+
+static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+	.want_sdr	= true,
+	.core_init	= ppc460sx_pciex_core_init,
+	.port_init_hw	= ppc460sx_pciex_init_port_hw,
+	.setup_utl	= ppc460sx_pciex_init_utl,
+	.check_link	= ppc460sx_pciex_check_link,
+};
+
+#endif /* CONFIG_44x */
+
+#ifdef CONFIG_40x
+
+static int __init ppc405ex_pciex_core_init(struct device_node *np)
+{
+	/* Nothing to do, return 2 ports */
+	return 2;
+}
+
+static void ppc405ex_pcie_phy_reset(struct ppc4xx_pciex_port *port)
+{
+	/* Assert the PE0_PHY reset */
+	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01010000);
+	msleep(1);
+
+	/* deassert the PE0_hotreset */
+	if (port->endpoint)
+		mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01111000);
+	else
+		mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01101000);
+
+	/* poll for phy !reset */
+	/* XXX FIXME add timeout */
+	while (!(mfdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSTA) & 0x00001000))
+		;
+
+	/* deassert the PE0_gpl_utl_reset */
+	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000);
+}
+
+static int __init ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+	u32 val;
+
+	if (port->endpoint)
+		val = PTYPE_LEGACY_ENDPOINT;
+	else
+		val = PTYPE_ROOT_PORT;
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET,
+	       1 << 24 | val << 20 | LNKW_X1 << 12);
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000);
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
+	mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET1, 0x720F0000);
+	mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET2, 0x70600003);
+
+	/*
+	 * Only reset the PHY when no link is currently established.
+	 * This is for the Atheros PCIe board which has problems to establish
+	 * the link (again) after this PHY reset. All other currently tested
+	 * PCIe boards don't show this problem.
+	 * This has to be re-tested and fixed in a later release!
+	 */
+	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
+	if (!(val & 0x00001000))
+		ppc405ex_pcie_phy_reset(port);
+
+	dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000);  /* guarded on */
+
+	port->has_ibpre = 1;
+
+	return ppc4xx_pciex_port_reset_sdr(port);
+}
+
+static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+	dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32(port->utl_base + PEUTL_OUTTR,   0x02000000);
+	out_be32(port->utl_base + PEUTL_INTR,    0x02000000);
+	out_be32(port->utl_base + PEUTL_OPDBSZ,  0x04000000);
+	out_be32(port->utl_base + PEUTL_PBBSZ,   0x21000000);
+	out_be32(port->utl_base + PEUTL_IPHBSZ,  0x02000000);
+	out_be32(port->utl_base + PEUTL_IPDBSZ,  0x04000000);
+	out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000);
+	out_be32(port->utl_base + PEUTL_PCTL,    0x80800066);
+
+	out_be32(port->utl_base + PEUTL_PBCTL,   0x08000000);
+
+	return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
+{
+	.want_sdr	= true,
+	.core_init	= ppc405ex_pciex_core_init,
+	.port_init_hw	= ppc405ex_pciex_init_port_hw,
+	.setup_utl	= ppc405ex_pciex_init_utl,
+	.check_link	= ppc4xx_pciex_check_link_sdr,
+};
+
+#endif /* CONFIG_40x */
+
+#ifdef CONFIG_476FPE
+static int __init ppc_476fpe_pciex_core_init(struct device_node *np)
+{
+	return 4;
+}
+
+static void __init ppc_476fpe_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+	u32 timeout_ms = 20;
+	u32 val = 0, mask = (PECFG_TLDLP_LNKUP|PECFG_TLDLP_PRESENT);
+	void __iomem *mbase = ioremap(port->cfg_space.start + 0x10000000,
+	                              0x1000);
+
+	printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
+
+	if (mbase == NULL) {
+		printk(KERN_WARNING "PCIE%d: failed to get cfg space\n",
+		                    port->index);
+		return;
+	}
+
+	while (timeout_ms--) {
+		val = in_le32(mbase + PECFG_TLDLP);
+
+		if ((val & mask) == mask)
+			break;
+		msleep(10);
+	}
+
+	if (val & PECFG_TLDLP_PRESENT) {
+		printk(KERN_INFO "PCIE%d: link is up !\n", port->index);
+		port->link = 1;
+	} else
+		printk(KERN_WARNING "PCIE%d: Link up failed\n", port->index);
+
+	iounmap(mbase);
+}
+
+static struct ppc4xx_pciex_hwops ppc_476fpe_pcie_hwops __initdata =
+{
+	.core_init	= ppc_476fpe_pciex_core_init,
+	.check_link	= ppc_476fpe_pciex_check_link,
+};
+#endif /* CONFIG_476FPE */
+
+/* Check that the core has been initied and if not, do it */
+static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
+{
+	static int core_init;
+	int count = -ENODEV;
+
+	if (core_init++)
+		return 0;
+
+#ifdef CONFIG_44x
+	if (of_device_is_compatible(np, "ibm,plb-pciex-440spe")) {
+		if (ppc440spe_revA())
+			ppc4xx_pciex_hwops = &ppc440speA_pcie_hwops;
+		else
+			ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
+	}
+	if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
+		ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
+	if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
+		ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
+	if (of_device_is_compatible(np, "ibm,plb-pciex-apm821xx"))
+		ppc4xx_pciex_hwops = &apm821xx_pcie_hwops;
+#endif /* CONFIG_44x    */
+#ifdef CONFIG_40x
+	if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
+		ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
+#endif
+#ifdef CONFIG_476FPE
+	if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe")
+		|| of_device_is_compatible(np, "ibm,plb-pciex-476gtr"))
+		ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops;
+#endif
+	if (ppc4xx_pciex_hwops == NULL) {
+		printk(KERN_WARNING "PCIE: unknown host type %pOF\n", np);
+		return -ENODEV;
+	}
+
+	count = ppc4xx_pciex_hwops->core_init(np);
+	if (count > 0) {
+		ppc4xx_pciex_ports =
+		       kcalloc(count, sizeof(struct ppc4xx_pciex_port),
+			       GFP_KERNEL);
+		if (ppc4xx_pciex_ports) {
+			ppc4xx_pciex_port_count = count;
+			return 0;
+		}
+		printk(KERN_WARNING "PCIE: failed to allocate ports array\n");
+		return -ENOMEM;
+	}
+	return -ENODEV;
+}
+
+static void __init ppc4xx_pciex_port_init_mapping(struct ppc4xx_pciex_port *port)
+{
+	/* We map PCI Express configuration based on the reg property */
+	dcr_write(port->dcrs, DCRO_PEGPL_CFGBAH,
+		  RES_TO_U32_HIGH(port->cfg_space.start));
+	dcr_write(port->dcrs, DCRO_PEGPL_CFGBAL,
+		  RES_TO_U32_LOW(port->cfg_space.start));
+
+	/* XXX FIXME: Use size from reg property. For now, map 512M */
+	dcr_write(port->dcrs, DCRO_PEGPL_CFGMSK, 0xe0000001);
+
+	/* We map UTL registers based on the reg property */
+	dcr_write(port->dcrs, DCRO_PEGPL_REGBAH,
+		  RES_TO_U32_HIGH(port->utl_regs.start));
+	dcr_write(port->dcrs, DCRO_PEGPL_REGBAL,
+		  RES_TO_U32_LOW(port->utl_regs.start));
+
+	/* XXX FIXME: Use size from reg property */
+	dcr_write(port->dcrs, DCRO_PEGPL_REGMSK, 0x00007001);
+
+	/* Disable all other outbound windows */
+	dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, 0);
+	dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, 0);
+	dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0);
+	dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0);
+}
+
+static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
+{
+	int rc = 0;
+
+	/* Init HW */
+	if (ppc4xx_pciex_hwops->port_init_hw)
+		rc = ppc4xx_pciex_hwops->port_init_hw(port);
+	if (rc != 0)
+		return rc;
+
+	/*
+	 * Initialize mapping: disable all regions and configure
+	 * CFG and REG regions based on resources in the device tree
+	 */
+	ppc4xx_pciex_port_init_mapping(port);
+
+	if (ppc4xx_pciex_hwops->check_link)
+		ppc4xx_pciex_hwops->check_link(port);
+
+	/*
+	 * Map UTL
+	 */
+	port->utl_base = ioremap(port->utl_regs.start, 0x100);
+	BUG_ON(port->utl_base == NULL);
+
+	/*
+	 * Setup UTL registers --BenH.
+	 */
+	if (ppc4xx_pciex_hwops->setup_utl)
+		ppc4xx_pciex_hwops->setup_utl(port);
+
+	/*
+	 * Check for VC0 active or PLL Locked and assert RDY.
+	 */
+	if (port->sdr_base) {
+		if (of_device_is_compatible(port->node,
+				"ibm,plb-pciex-460sx")){
+			if (port->link && ppc4xx_pciex_wait_on_sdr(port,
+					PESDRn_RCSSTS,
+					1 << 12, 1 << 12, 5000)) {
+				printk(KERN_INFO "PCIE%d: PLL not locked\n",
+						port->index);
+				port->link = 0;
+			}
+		} else if (port->link &&
+			ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
+				1 << 16, 1 << 16, 5000)) {
+			printk(KERN_INFO "PCIE%d: VC0 not active\n",
+					port->index);
+			port->link = 0;
+		}
+
+		dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20);
+	}
+
+	msleep(100);
+
+	return 0;
+}
+
+static int ppc4xx_pciex_validate_bdf(struct ppc4xx_pciex_port *port,
+				     struct pci_bus *bus,
+				     unsigned int devfn)
+{
+	static int message;
+
+	/* Endpoint can not generate upstream(remote) config cycles */
+	if (port->endpoint && bus->number != port->hose->first_busno)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/* Check we are within the mapped range */
+	if (bus->number > port->hose->last_busno) {
+		if (!message) {
+			printk(KERN_WARNING "Warning! Probing bus %u"
+			       " out of range !\n", bus->number);
+			message++;
+		}
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	/* The root complex has only one device / function */
+	if (bus->number == port->hose->first_busno && devfn != 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/* The other side of the RC has only one device as well */
+	if (bus->number == (port->hose->first_busno + 1) &&
+	    PCI_SLOT(devfn) != 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/* Check if we have a link */
+	if ((bus->number != port->hose->first_busno) && !port->link)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return 0;
+}
+
+static void __iomem *ppc4xx_pciex_get_config_base(struct ppc4xx_pciex_port *port,
+						  struct pci_bus *bus,
+						  unsigned int devfn)
+{
+	int relbus;
+
+	/* Remove the casts when we finally remove the stupid volatile
+	 * in struct pci_controller
+	 */
+	if (bus->number == port->hose->first_busno)
+		return (void __iomem *)port->hose->cfg_addr;
+
+	relbus = bus->number - (port->hose->first_busno + 1);
+	return (void __iomem *)port->hose->cfg_data +
+		((relbus  << 20) | (devfn << 12));
+}
+
+static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
+				    int offset, int len, u32 *val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct ppc4xx_pciex_port *port =
+		&ppc4xx_pciex_ports[hose->indirect_type];
+	void __iomem *addr;
+	u32 gpl_cfg;
+
+	BUG_ON(hose != port->hose);
+
+	if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr = ppc4xx_pciex_get_config_base(port, bus, devfn);
+
+	/*
+	 * Reading from configuration space of non-existing device can
+	 * generate transaction errors. For the read duration we suppress
+	 * assertion of machine check exceptions to avoid those.
+	 */
+	gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
+	dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+
+	/* Make sure no CRS is recorded */
+	out_be32(port->utl_base + PEUTL_RCSTA, 0x00040000);
+
+	switch (len) {
+	case 1:
+		*val = in_8((u8 *)(addr + offset));
+		break;
+	case 2:
+		*val = in_le16((u16 *)(addr + offset));
+		break;
+	default:
+		*val = in_le32((u32 *)(addr + offset));
+		break;
+	}
+
+	pr_debug("pcie-config-read: bus=%3d [%3d..%3d] devfn=0x%04x"
+		 " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n",
+		 bus->number, hose->first_busno, hose->last_busno,
+		 devfn, offset, len, addr + offset, *val);
+
+	/* Check for CRS (440SPe rev B does that for us but heh ..) */
+	if (in_be32(port->utl_base + PEUTL_RCSTA) & 0x00040000) {
+		pr_debug("Got CRS !\n");
+		if (len != 4 || offset != 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		*val = 0xffff0001;
+	}
+
+	dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int ppc4xx_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
+				     int offset, int len, u32 val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct ppc4xx_pciex_port *port =
+		&ppc4xx_pciex_ports[hose->indirect_type];
+	void __iomem *addr;
+	u32 gpl_cfg;
+
+	if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr = ppc4xx_pciex_get_config_base(port, bus, devfn);
+
+	/*
+	 * Reading from configuration space of non-existing device can
+	 * generate transaction errors. For the read duration we suppress
+	 * assertion of machine check exceptions to avoid those.
+	 */
+	gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
+	dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+
+	pr_debug("pcie-config-write: bus=%3d [%3d..%3d] devfn=0x%04x"
+		 " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n",
+		 bus->number, hose->first_busno, hose->last_busno,
+		 devfn, offset, len, addr + offset, val);
+
+	switch (len) {
+	case 1:
+		out_8((u8 *)(addr + offset), val);
+		break;
+	case 2:
+		out_le16((u16 *)(addr + offset), val);
+		break;
+	default:
+		out_le32((u32 *)(addr + offset), val);
+		break;
+	}
+
+	dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ppc4xx_pciex_pci_ops =
+{
+	.read  = ppc4xx_pciex_read_config,
+	.write = ppc4xx_pciex_write_config,
+};
+
+static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port	*port,
+					     struct pci_controller	*hose,
+					     void __iomem		*mbase,
+					     u64			plb_addr,
+					     u64			pci_addr,
+					     u64			size,
+					     unsigned int		flags,
+					     int			index)
+{
+	u32 lah, lal, pciah, pcial, sa;
+
+	if (!is_power_of_2(size) ||
+	    (index < 2 && size < 0x100000) ||
+	    (index == 2 && size < 0x100) ||
+	    (plb_addr & (size - 1)) != 0) {
+		printk(KERN_WARNING "%pOF: Resource out of range\n", hose->dn);
+		return -1;
+	}
+
+	/* Calculate register values */
+	lah = RES_TO_U32_HIGH(plb_addr);
+	lal = RES_TO_U32_LOW(plb_addr);
+	pciah = RES_TO_U32_HIGH(pci_addr);
+	pcial = RES_TO_U32_LOW(pci_addr);
+	sa = (0xffffffffu << ilog2(size)) | 0x1;
+
+	/* Program register values */
+	switch (index) {
+	case 0:
+		out_le32(mbase + PECFG_POM0LAH, pciah);
+		out_le32(mbase + PECFG_POM0LAL, pcial);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
+		/*Enabled and single region */
+		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+				sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
+					| DCRO_PEGPL_OMRxMSKL_VAL);
+		else if (of_device_is_compatible(
+				port->node, "ibm,plb-pciex-476fpe") ||
+			of_device_is_compatible(
+				port->node, "ibm,plb-pciex-476gtr"))
+			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+				sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT
+					| DCRO_PEGPL_OMRxMSKL_VAL);
+		else
+			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+				sa | DCRO_PEGPL_OMR1MSKL_UOT
+					| DCRO_PEGPL_OMRxMSKL_VAL);
+		break;
+	case 1:
+		out_le32(mbase + PECFG_POM1LAH, pciah);
+		out_le32(mbase + PECFG_POM1LAL, pcial);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL,
+				sa | DCRO_PEGPL_OMRxMSKL_VAL);
+		break;
+	case 2:
+		out_le32(mbase + PECFG_POM2LAH, pciah);
+		out_le32(mbase + PECFG_POM2LAL, pcial);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAH, lah);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
+		/* Note that 3 here means enabled | IO space !!! */
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL,
+				sa | DCRO_PEGPL_OMR3MSKL_IO
+					| DCRO_PEGPL_OMRxMSKL_VAL);
+		break;
+	}
+
+	return 0;
+}
+
+static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,
+					       struct pci_controller *hose,
+					       void __iomem *mbase)
+{
+	int i, j, found_isa_hole = 0;
+
+	/* Setup outbound memory windows */
+	for (i = j = 0; i < 3; i++) {
+		struct resource *res = &hose->mem_resources[i];
+		resource_size_t offset = hose->mem_offset[i];
+
+		/* we only care about memory windows */
+		if (!(res->flags & IORESOURCE_MEM))
+			continue;
+		if (j > 1) {
+			printk(KERN_WARNING "%pOF: Too many ranges\n",
+			       port->node);
+			break;
+		}
+
+		/* Configure the resource */
+		if (ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+					       res->start,
+					       res->start - offset,
+					       resource_size(res),
+					       res->flags,
+					       j) == 0) {
+			j++;
+
+			/* If the resource PCI address is 0 then we have our
+			 * ISA memory hole
+			 */
+			if (res->start == offset)
+				found_isa_hole = 1;
+		}
+	}
+
+	/* Handle ISA memory hole if not already covered */
+	if (j <= 1 && !found_isa_hole && hose->isa_mem_size)
+		if (ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+					       hose->isa_mem_phys, 0,
+					       hose->isa_mem_size, 0, j) == 0)
+			printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n",
+			       hose->dn);
+
+	/* Configure IO, always 64K starting at 0. We hard wire it to 64K !
+	 * Note also that it -has- to be region index 2 on this HW
+	 */
+	if (hose->io_resource.flags & IORESOURCE_IO)
+		ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+					   hose->io_base_phys, 0,
+					   0x10000, IORESOURCE_IO, 2);
+}
+
+static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
+					       struct pci_controller *hose,
+					       void __iomem *mbase,
+					       struct resource *res)
+{
+	resource_size_t size = resource_size(res);
+	u64 sa;
+
+	if (port->endpoint) {
+		resource_size_t ep_addr = 0;
+		resource_size_t ep_size = 32 << 20;
+
+		/* Currently we map a fixed 64MByte window to PLB address
+		 * 0 (SDRAM). This should probably be configurable via a dts
+		 * property.
+		 */
+
+		/* Calculate window size */
+		sa = (0xffffffffffffffffull << ilog2(ep_size));
+
+		/* Setup BAR0 */
+		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+		out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa) |
+			 PCI_BASE_ADDRESS_MEM_TYPE_64);
+
+		/* Disable BAR1 & BAR2 */
+		out_le32(mbase + PECFG_BAR1MPA, 0);
+		out_le32(mbase + PECFG_BAR2HMPA, 0);
+		out_le32(mbase + PECFG_BAR2LMPA, 0);
+
+		out_le32(mbase + PECFG_PIM01SAH, RES_TO_U32_HIGH(sa));
+		out_le32(mbase + PECFG_PIM01SAL, RES_TO_U32_LOW(sa));
+
+		out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(ep_addr));
+		out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
+	} else {
+		/* Calculate window size */
+		sa = (0xffffffffffffffffull << ilog2(size));
+		if (res->flags & IORESOURCE_PREFETCH)
+			sa |= PCI_BASE_ADDRESS_MEM_PREFETCH;
+
+		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") ||
+		    of_device_is_compatible(
+			    port->node, "ibm,plb-pciex-476fpe") ||
+		    of_device_is_compatible(
+			    port->node, "ibm,plb-pciex-476gtr"))
+			sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
+
+		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+		out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+
+		/* The setup of the split looks weird to me ... let's see
+		 * if it works
+		 */
+		out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+		out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
+		out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+		out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
+		out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+		out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
+		out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
+		out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
+	}
+
+	/* Enable inbound mapping */
+	out_le32(mbase + PECFG_PIMEN, 0x1);
+
+	/* Enable I/O, Mem, and Busmaster cycles */
+	out_le16(mbase + PCI_COMMAND,
+		 in_le16(mbase + PCI_COMMAND) |
+		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+}
+
+static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port)
+{
+	struct resource dma_window;
+	struct pci_controller *hose = NULL;
+	const int *bus_range;
+	int primary = 0, busses;
+	void __iomem *mbase = NULL, *cfg_data = NULL;
+	const u32 *pval;
+	u32 val;
+
+	/* Check if primary bridge */
+	if (of_get_property(port->node, "primary", NULL))
+		primary = 1;
+
+	/* Get bus range if any */
+	bus_range = of_get_property(port->node, "bus-range", NULL);
+
+	/* Allocate the host controller data structure */
+	hose = pcibios_alloc_controller(port->node);
+	if (!hose)
+		goto fail;
+
+	/* We stick the port number in "indirect_type" so the config space
+	 * ops can retrieve the port data structure easily
+	 */
+	hose->indirect_type = port->index;
+
+	/* Get bus range */
+	hose->first_busno = bus_range ? bus_range[0] : 0x0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	/* Because of how big mapping the config space is (1M per bus), we
+	 * limit how many busses we support. In the long run, we could replace
+	 * that with something akin to kmap_atomic instead. We set aside 1 bus
+	 * for the host itself too.
+	 */
+	busses = hose->last_busno - hose->first_busno; /* This is off by 1 */
+	if (busses > MAX_PCIE_BUS_MAPPED) {
+		busses = MAX_PCIE_BUS_MAPPED;
+		hose->last_busno = hose->first_busno + busses;
+	}
+
+	if (!port->endpoint) {
+		/* Only map the external config space in cfg_data for
+		 * PCIe root-complexes. External space is 1M per bus
+		 */
+		cfg_data = ioremap(port->cfg_space.start +
+				   (hose->first_busno + 1) * 0x100000,
+				   busses * 0x100000);
+		if (cfg_data == NULL) {
+			printk(KERN_ERR "%pOF: Can't map external config space !",
+			       port->node);
+			goto fail;
+		}
+		hose->cfg_data = cfg_data;
+	}
+
+	/* Always map the host config space in cfg_addr.
+	 * Internal space is 4K
+	 */
+	mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+	if (mbase == NULL) {
+		printk(KERN_ERR "%pOF: Can't map internal config space !",
+		       port->node);
+		goto fail;
+	}
+	hose->cfg_addr = mbase;
+
+	pr_debug("PCIE %pOF, bus %d..%d\n", port->node,
+		 hose->first_busno, hose->last_busno);
+	pr_debug("     config space mapped at: root @0x%p, other @0x%p\n",
+		 hose->cfg_addr, hose->cfg_data);
+
+	/* Setup config space */
+	hose->ops = &ppc4xx_pciex_pci_ops;
+	port->hose = hose;
+	mbase = (void __iomem *)hose->cfg_addr;
+
+	if (!port->endpoint) {
+		/*
+		 * Set bus numbers on our root port
+		 */
+		out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
+		out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
+		out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+	}
+
+	/*
+	 * OMRs are already reset, also disable PIMs
+	 */
+	out_le32(mbase + PECFG_PIMEN, 0);
+
+	/* Parse outbound mapping resources */
+	pci_process_bridge_OF_ranges(hose, port->node, primary);
+
+	/* Parse inbound mapping resources */
+	if (ppc4xx_parse_dma_ranges(hose, mbase, &dma_window) != 0)
+		goto fail;
+
+	/* Configure outbound ranges POMs */
+	ppc4xx_configure_pciex_POMs(port, hose, mbase);
+
+	/* Configure inbound ranges PIMs */
+	ppc4xx_configure_pciex_PIMs(port, hose, mbase, &dma_window);
+
+	/* The root complex doesn't show up if we don't set some vendor
+	 * and device IDs into it. The defaults below are the same bogus
+	 * one that the initial code in arch/ppc had. This can be
+	 * overwritten by setting the "vendor-id/device-id" properties
+	 * in the pciex node.
+	 */
+
+	/* Get the (optional) vendor-/device-id from the device-tree */
+	pval = of_get_property(port->node, "vendor-id", NULL);
+	if (pval) {
+		val = *pval;
+	} else {
+		if (!port->endpoint)
+			val = 0xaaa0 + port->index;
+		else
+			val = 0xeee0 + port->index;
+	}
+	out_le16(mbase + 0x200, val);
+
+	pval = of_get_property(port->node, "device-id", NULL);
+	if (pval) {
+		val = *pval;
+	} else {
+		if (!port->endpoint)
+			val = 0xbed0 + port->index;
+		else
+			val = 0xfed0 + port->index;
+	}
+	out_le16(mbase + 0x202, val);
+
+	/* Enable Bus master, memory, and io space */
+	if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+		out_le16(mbase + 0x204, 0x7);
+
+	if (!port->endpoint) {
+		/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+		out_le32(mbase + 0x208, 0x06040001);
+
+		printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
+		       port->index);
+	} else {
+		/* Set Class Code to Processor/PPC */
+		out_le32(mbase + 0x208, 0x0b200001);
+
+		printk(KERN_INFO "PCIE%d: successfully set as endpoint\n",
+		       port->index);
+	}
+
+	return;
+ fail:
+	if (hose)
+		pcibios_free_controller(hose);
+	if (cfg_data)
+		iounmap(cfg_data);
+	if (mbase)
+		iounmap(mbase);
+}
+
+static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
+{
+	struct ppc4xx_pciex_port *port;
+	const u32 *pval;
+	int portno;
+	unsigned int dcrs;
+
+	/* First, proceed to core initialization as we assume there's
+	 * only one PCIe core in the system
+	 */
+	if (ppc4xx_pciex_check_core_init(np))
+		return;
+
+	/* Get the port number from the device-tree */
+	pval = of_get_property(np, "port", NULL);
+	if (pval == NULL) {
+		printk(KERN_ERR "PCIE: Can't find port number for %pOF\n", np);
+		return;
+	}
+	portno = *pval;
+	if (portno >= ppc4xx_pciex_port_count) {
+		printk(KERN_ERR "PCIE: port number out of range for %pOF\n",
+		       np);
+		return;
+	}
+	port = &ppc4xx_pciex_ports[portno];
+	port->index = portno;
+
+	/*
+	 * Check if device is enabled
+	 */
+	if (!of_device_is_available(np)) {
+		printk(KERN_INFO "PCIE%d: Port disabled via device-tree\n", port->index);
+		return;
+	}
+
+	port->node = of_node_get(np);
+	if (ppc4xx_pciex_hwops->want_sdr) {
+		pval = of_get_property(np, "sdr-base", NULL);
+		if (pval == NULL) {
+			printk(KERN_ERR "PCIE: missing sdr-base for %pOF\n",
+			       np);
+			return;
+		}
+		port->sdr_base = *pval;
+	}
+
+	/* Check if device_type property is set to "pci" or "pci-endpoint".
+	 * Resulting from this setup this PCIe port will be configured
+	 * as root-complex or as endpoint.
+	 */
+	if (of_node_is_type(port->node, "pci-endpoint")) {
+		port->endpoint = 1;
+	} else if (of_node_is_type(port->node, "pci")) {
+		port->endpoint = 0;
+	} else {
+		printk(KERN_ERR "PCIE: missing or incorrect device_type for %pOF\n",
+		       np);
+		return;
+	}
+
+	/* Fetch config space registers address */
+	if (of_address_to_resource(np, 0, &port->cfg_space)) {
+		printk(KERN_ERR "%pOF: Can't get PCI-E config space !", np);
+		return;
+	}
+	/* Fetch host bridge internal registers address */
+	if (of_address_to_resource(np, 1, &port->utl_regs)) {
+		printk(KERN_ERR "%pOF: Can't get UTL register base !", np);
+		return;
+	}
+
+	/* Map DCRs */
+	dcrs = dcr_resource_start(np, 0);
+	if (dcrs == 0) {
+		printk(KERN_ERR "%pOF: Can't get DCR register base !", np);
+		return;
+	}
+	port->dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
+
+	/* Initialize the port specific registers */
+	if (ppc4xx_pciex_port_init(port)) {
+		printk(KERN_WARNING "PCIE%d: Port init failed\n", port->index);
+		return;
+	}
+
+	/* Setup the linux hose data structure */
+	ppc4xx_pciex_port_setup_hose(port);
+}
+
+#endif /* CONFIG_PPC4xx_PCI_EXPRESS */
+
+static int __init ppc4xx_pci_find_bridges(void)
+{
+	struct device_node *np;
+
+	pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0);
+
+#ifdef CONFIG_PPC4xx_PCI_EXPRESS
+	for_each_compatible_node(np, NULL, "ibm,plb-pciex")
+		ppc4xx_probe_pciex_bridge(np);
+#endif
+	for_each_compatible_node(np, NULL, "ibm,plb-pcix")
+		ppc4xx_probe_pcix_bridge(np);
+	for_each_compatible_node(np, NULL, "ibm,plb-pci")
+		ppc4xx_probe_pci_bridge(np);
+
+	return 0;
+}
+arch_initcall(ppc4xx_pci_find_bridges);
+
diff --git a/arch/powerpc/platforms/4xx/pci.h b/arch/powerpc/platforms/4xx/pci.h
new file mode 100644
index 000000000..bb4821938
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/pci.h
@@ -0,0 +1,505 @@
+/*
+ * PCI / PCI-X / PCI-Express support for 4xx parts
+ *
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * Bits and pieces extracted from arch/ppc support by
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2002-2005 MontaVista Software Inc.
+ */
+#ifndef __PPC4XX_PCI_H__
+#define __PPC4XX_PCI_H__
+
+/*
+ * 4xx PCI-X bridge register definitions
+ */
+#define PCIX0_VENDID		0x000
+#define PCIX0_DEVID		0x002
+#define PCIX0_COMMAND		0x004
+#define PCIX0_STATUS		0x006
+#define PCIX0_REVID		0x008
+#define PCIX0_CLS		0x009
+#define PCIX0_CACHELS		0x00c
+#define PCIX0_LATTIM		0x00d
+#define PCIX0_HDTYPE		0x00e
+#define PCIX0_BIST		0x00f
+#define PCIX0_BAR0L		0x010
+#define PCIX0_BAR0H		0x014
+#define PCIX0_BAR1		0x018
+#define PCIX0_BAR2L		0x01c
+#define PCIX0_BAR2H		0x020
+#define PCIX0_BAR3		0x024
+#define PCIX0_CISPTR		0x028
+#define PCIX0_SBSYSVID		0x02c
+#define PCIX0_SBSYSID		0x02e
+#define PCIX0_EROMBA		0x030
+#define PCIX0_CAP		0x034
+#define PCIX0_RES0		0x035
+#define PCIX0_RES1		0x036
+#define PCIX0_RES2		0x038
+#define PCIX0_INTLN		0x03c
+#define PCIX0_INTPN		0x03d
+#define PCIX0_MINGNT		0x03e
+#define PCIX0_MAXLTNCY		0x03f
+#define PCIX0_BRDGOPT1		0x040
+#define PCIX0_BRDGOPT2		0x044
+#define PCIX0_ERREN		0x050
+#define PCIX0_ERRSTS		0x054
+#define PCIX0_PLBBESR		0x058
+#define PCIX0_PLBBEARL		0x05c
+#define PCIX0_PLBBEARH		0x060
+#define PCIX0_POM0LAL		0x068
+#define PCIX0_POM0LAH		0x06c
+#define PCIX0_POM0SA		0x070
+#define PCIX0_POM0PCIAL		0x074
+#define PCIX0_POM0PCIAH		0x078
+#define PCIX0_POM1LAL		0x07c
+#define PCIX0_POM1LAH		0x080
+#define PCIX0_POM1SA		0x084
+#define PCIX0_POM1PCIAL		0x088
+#define PCIX0_POM1PCIAH		0x08c
+#define PCIX0_POM2SA		0x090
+#define PCIX0_PIM0SAL		0x098
+#define PCIX0_PIM0SA		PCIX0_PIM0SAL
+#define PCIX0_PIM0LAL		0x09c
+#define PCIX0_PIM0LAH		0x0a0
+#define PCIX0_PIM1SA		0x0a4
+#define PCIX0_PIM1LAL		0x0a8
+#define PCIX0_PIM1LAH		0x0ac
+#define PCIX0_PIM2SAL		0x0b0
+#define PCIX0_PIM2SA		PCIX0_PIM2SAL
+#define PCIX0_PIM2LAL		0x0b4
+#define PCIX0_PIM2LAH		0x0b8
+#define PCIX0_OMCAPID		0x0c0
+#define PCIX0_OMNIPTR		0x0c1
+#define PCIX0_OMMC		0x0c2
+#define PCIX0_OMMA		0x0c4
+#define PCIX0_OMMUA		0x0c8
+#define PCIX0_OMMDATA		0x0cc
+#define PCIX0_OMMEOI		0x0ce
+#define PCIX0_PMCAPID		0x0d0
+#define PCIX0_PMNIPTR		0x0d1
+#define PCIX0_PMC		0x0d2
+#define PCIX0_PMCSR		0x0d4
+#define PCIX0_PMCSRBSE		0x0d6
+#define PCIX0_PMDATA		0x0d7
+#define PCIX0_PMSCRR		0x0d8
+#define PCIX0_CAPID		0x0dc
+#define PCIX0_NIPTR		0x0dd
+#define PCIX0_CMD		0x0de
+#define PCIX0_STS		0x0e0
+#define PCIX0_IDR		0x0e4
+#define PCIX0_CID		0x0e8
+#define PCIX0_RID		0x0ec
+#define PCIX0_PIM0SAH		0x0f8
+#define PCIX0_PIM2SAH		0x0fc
+#define PCIX0_MSGIL		0x100
+#define PCIX0_MSGIH		0x104
+#define PCIX0_MSGOL		0x108
+#define PCIX0_MSGOH		0x10c
+#define PCIX0_IM		0x1f8
+
+/*
+ * 4xx PCI bridge register definitions
+ */
+#define PCIL0_PMM0LA		0x00
+#define PCIL0_PMM0MA		0x04
+#define PCIL0_PMM0PCILA		0x08
+#define PCIL0_PMM0PCIHA		0x0c
+#define PCIL0_PMM1LA		0x10
+#define PCIL0_PMM1MA		0x14
+#define PCIL0_PMM1PCILA		0x18
+#define PCIL0_PMM1PCIHA		0x1c
+#define PCIL0_PMM2LA		0x20
+#define PCIL0_PMM2MA		0x24
+#define PCIL0_PMM2PCILA		0x28
+#define PCIL0_PMM2PCIHA		0x2c
+#define PCIL0_PTM1MS		0x30
+#define PCIL0_PTM1LA		0x34
+#define PCIL0_PTM2MS		0x38
+#define PCIL0_PTM2LA		0x3c
+
+/*
+ * 4xx PCIe bridge register definitions
+ */
+
+/* DCR offsets */
+#define DCRO_PEGPL_CFGBAH		0x00
+#define DCRO_PEGPL_CFGBAL		0x01
+#define DCRO_PEGPL_CFGMSK		0x02
+#define DCRO_PEGPL_MSGBAH		0x03
+#define DCRO_PEGPL_MSGBAL		0x04
+#define DCRO_PEGPL_MSGMSK		0x05
+#define DCRO_PEGPL_OMR1BAH		0x06
+#define DCRO_PEGPL_OMR1BAL		0x07
+#define DCRO_PEGPL_OMR1MSKH		0x08
+#define DCRO_PEGPL_OMR1MSKL		0x09
+#define DCRO_PEGPL_OMR2BAH		0x0a
+#define DCRO_PEGPL_OMR2BAL		0x0b
+#define DCRO_PEGPL_OMR2MSKH		0x0c
+#define DCRO_PEGPL_OMR2MSKL		0x0d
+#define DCRO_PEGPL_OMR3BAH		0x0e
+#define DCRO_PEGPL_OMR3BAL		0x0f
+#define DCRO_PEGPL_OMR3MSKH		0x10
+#define DCRO_PEGPL_OMR3MSKL		0x11
+#define DCRO_PEGPL_REGBAH		0x12
+#define DCRO_PEGPL_REGBAL		0x13
+#define DCRO_PEGPL_REGMSK		0x14
+#define DCRO_PEGPL_SPECIAL		0x15
+#define DCRO_PEGPL_CFG			0x16
+#define DCRO_PEGPL_ESR			0x17
+#define DCRO_PEGPL_EARH			0x18
+#define DCRO_PEGPL_EARL			0x19
+#define DCRO_PEGPL_EATR			0x1a
+
+/* DMER mask */
+#define GPL_DMER_MASK_DISA	0x02000000
+
+/*
+ * System DCRs (SDRs)
+ */
+#define PESDR0_PLLLCT1			0x03a0
+#define PESDR0_PLLLCT2			0x03a1
+#define PESDR0_PLLLCT3			0x03a2
+
+/*
+ * 440SPe additional DCRs
+ */
+#define PESDR0_440SPE_UTLSET1		0x0300
+#define PESDR0_440SPE_UTLSET2		0x0301
+#define PESDR0_440SPE_DLPSET		0x0302
+#define PESDR0_440SPE_LOOP		0x0303
+#define PESDR0_440SPE_RCSSET		0x0304
+#define PESDR0_440SPE_RCSSTS		0x0305
+#define PESDR0_440SPE_HSSL0SET1		0x0306
+#define PESDR0_440SPE_HSSL0SET2		0x0307
+#define PESDR0_440SPE_HSSL0STS		0x0308
+#define PESDR0_440SPE_HSSL1SET1		0x0309
+#define PESDR0_440SPE_HSSL1SET2		0x030a
+#define PESDR0_440SPE_HSSL1STS		0x030b
+#define PESDR0_440SPE_HSSL2SET1		0x030c
+#define PESDR0_440SPE_HSSL2SET2		0x030d
+#define PESDR0_440SPE_HSSL2STS		0x030e
+#define PESDR0_440SPE_HSSL3SET1		0x030f
+#define PESDR0_440SPE_HSSL3SET2		0x0310
+#define PESDR0_440SPE_HSSL3STS		0x0311
+#define PESDR0_440SPE_HSSL4SET1		0x0312
+#define PESDR0_440SPE_HSSL4SET2		0x0313
+#define PESDR0_440SPE_HSSL4STS	       	0x0314
+#define PESDR0_440SPE_HSSL5SET1		0x0315
+#define PESDR0_440SPE_HSSL5SET2		0x0316
+#define PESDR0_440SPE_HSSL5STS		0x0317
+#define PESDR0_440SPE_HSSL6SET1		0x0318
+#define PESDR0_440SPE_HSSL6SET2		0x0319
+#define PESDR0_440SPE_HSSL6STS		0x031a
+#define PESDR0_440SPE_HSSL7SET1		0x031b
+#define PESDR0_440SPE_HSSL7SET2		0x031c
+#define PESDR0_440SPE_HSSL7STS		0x031d
+#define PESDR0_440SPE_HSSCTLSET		0x031e
+#define PESDR0_440SPE_LANE_ABCD		0x031f
+#define PESDR0_440SPE_LANE_EFGH		0x0320
+
+#define PESDR1_440SPE_UTLSET1		0x0340
+#define PESDR1_440SPE_UTLSET2		0x0341
+#define PESDR1_440SPE_DLPSET		0x0342
+#define PESDR1_440SPE_LOOP		0x0343
+#define PESDR1_440SPE_RCSSET		0x0344
+#define PESDR1_440SPE_RCSSTS		0x0345
+#define PESDR1_440SPE_HSSL0SET1		0x0346
+#define PESDR1_440SPE_HSSL0SET2		0x0347
+#define PESDR1_440SPE_HSSL0STS		0x0348
+#define PESDR1_440SPE_HSSL1SET1		0x0349
+#define PESDR1_440SPE_HSSL1SET2		0x034a
+#define PESDR1_440SPE_HSSL1STS		0x034b
+#define PESDR1_440SPE_HSSL2SET1		0x034c
+#define PESDR1_440SPE_HSSL2SET2		0x034d
+#define PESDR1_440SPE_HSSL2STS		0x034e
+#define PESDR1_440SPE_HSSL3SET1		0x034f
+#define PESDR1_440SPE_HSSL3SET2		0x0350
+#define PESDR1_440SPE_HSSL3STS		0x0351
+#define PESDR1_440SPE_HSSCTLSET		0x0352
+#define PESDR1_440SPE_LANE_ABCD		0x0353
+
+#define PESDR2_440SPE_UTLSET1		0x0370
+#define PESDR2_440SPE_UTLSET2		0x0371
+#define PESDR2_440SPE_DLPSET		0x0372
+#define PESDR2_440SPE_LOOP		0x0373
+#define PESDR2_440SPE_RCSSET		0x0374
+#define PESDR2_440SPE_RCSSTS		0x0375
+#define PESDR2_440SPE_HSSL0SET1		0x0376
+#define PESDR2_440SPE_HSSL0SET2		0x0377
+#define PESDR2_440SPE_HSSL0STS		0x0378
+#define PESDR2_440SPE_HSSL1SET1		0x0379
+#define PESDR2_440SPE_HSSL1SET2		0x037a
+#define PESDR2_440SPE_HSSL1STS		0x037b
+#define PESDR2_440SPE_HSSL2SET1		0x037c
+#define PESDR2_440SPE_HSSL2SET2		0x037d
+#define PESDR2_440SPE_HSSL2STS		0x037e
+#define PESDR2_440SPE_HSSL3SET1		0x037f
+#define PESDR2_440SPE_HSSL3SET2		0x0380
+#define PESDR2_440SPE_HSSL3STS		0x0381
+#define PESDR2_440SPE_HSSCTLSET		0x0382
+#define PESDR2_440SPE_LANE_ABCD		0x0383
+
+/*
+ * 405EX additional DCRs
+ */
+#define PESDR0_405EX_UTLSET1		0x0400
+#define PESDR0_405EX_UTLSET2		0x0401
+#define PESDR0_405EX_DLPSET		0x0402
+#define PESDR0_405EX_LOOP		0x0403
+#define PESDR0_405EX_RCSSET		0x0404
+#define PESDR0_405EX_RCSSTS		0x0405
+#define PESDR0_405EX_PHYSET1		0x0406
+#define PESDR0_405EX_PHYSET2		0x0407
+#define PESDR0_405EX_BIST		0x0408
+#define PESDR0_405EX_LPB		0x040B
+#define PESDR0_405EX_PHYSTA		0x040C
+
+#define PESDR1_405EX_UTLSET1		0x0440
+#define PESDR1_405EX_UTLSET2		0x0441
+#define PESDR1_405EX_DLPSET		0x0442
+#define PESDR1_405EX_LOOP		0x0443
+#define PESDR1_405EX_RCSSET		0x0444
+#define PESDR1_405EX_RCSSTS		0x0445
+#define PESDR1_405EX_PHYSET1		0x0446
+#define PESDR1_405EX_PHYSET2		0x0447
+#define PESDR1_405EX_BIST		0x0448
+#define PESDR1_405EX_LPB		0x044B
+#define PESDR1_405EX_PHYSTA		0x044C
+
+/*
+ * 460EX additional DCRs
+ */
+#define PESDR0_460EX_L0BIST		0x0308
+#define PESDR0_460EX_L0BISTSTS		0x0309
+#define PESDR0_460EX_L0CDRCTL		0x030A
+#define PESDR0_460EX_L0DRV		0x030B
+#define PESDR0_460EX_L0REC		0x030C
+#define PESDR0_460EX_L0LPB		0x030D
+#define PESDR0_460EX_L0CLK		0x030E
+#define PESDR0_460EX_PHY_CTL_RST	0x030F
+#define PESDR0_460EX_RSTSTA		0x0310
+#define PESDR0_460EX_OBS		0x0311
+#define PESDR0_460EX_L0ERRC		0x0320
+
+#define PESDR1_460EX_L0BIST		0x0348
+#define PESDR1_460EX_L1BIST		0x0349
+#define PESDR1_460EX_L2BIST		0x034A
+#define PESDR1_460EX_L3BIST		0x034B
+#define PESDR1_460EX_L0BISTSTS		0x034C
+#define PESDR1_460EX_L1BISTSTS		0x034D
+#define PESDR1_460EX_L2BISTSTS		0x034E
+#define PESDR1_460EX_L3BISTSTS		0x034F
+#define PESDR1_460EX_L0CDRCTL		0x0350
+#define PESDR1_460EX_L1CDRCTL		0x0351
+#define PESDR1_460EX_L2CDRCTL		0x0352
+#define PESDR1_460EX_L3CDRCTL		0x0353
+#define PESDR1_460EX_L0DRV		0x0354
+#define PESDR1_460EX_L1DRV		0x0355
+#define PESDR1_460EX_L2DRV		0x0356
+#define PESDR1_460EX_L3DRV		0x0357
+#define PESDR1_460EX_L0REC		0x0358
+#define PESDR1_460EX_L1REC		0x0359
+#define PESDR1_460EX_L2REC		0x035A
+#define PESDR1_460EX_L3REC		0x035B
+#define PESDR1_460EX_L0LPB		0x035C
+#define PESDR1_460EX_L1LPB		0x035D
+#define PESDR1_460EX_L2LPB		0x035E
+#define PESDR1_460EX_L3LPB		0x035F
+#define PESDR1_460EX_L0CLK		0x0360
+#define PESDR1_460EX_L1CLK		0x0361
+#define PESDR1_460EX_L2CLK		0x0362
+#define PESDR1_460EX_L3CLK		0x0363
+#define PESDR1_460EX_PHY_CTL_RST	0x0364
+#define PESDR1_460EX_RSTSTA		0x0365
+#define PESDR1_460EX_OBS		0x0366
+#define PESDR1_460EX_L0ERRC		0x0368
+#define PESDR1_460EX_L1ERRC		0x0369
+#define PESDR1_460EX_L2ERRC		0x036A
+#define PESDR1_460EX_L3ERRC		0x036B
+#define PESDR0_460EX_IHS1		0x036C
+#define PESDR0_460EX_IHS2		0x036D
+
+/*
+ * 460SX additional DCRs
+ */
+#define PESDRn_460SX_RCEI		0x02
+
+#define PESDR0_460SX_HSSL0DAMP		0x320
+#define PESDR0_460SX_HSSL1DAMP		0x321
+#define PESDR0_460SX_HSSL2DAMP		0x322
+#define PESDR0_460SX_HSSL3DAMP		0x323
+#define PESDR0_460SX_HSSL4DAMP		0x324
+#define PESDR0_460SX_HSSL5DAMP		0x325
+#define PESDR0_460SX_HSSL6DAMP		0x326
+#define PESDR0_460SX_HSSL7DAMP		0x327
+
+#define PESDR1_460SX_HSSL0DAMP		0x354
+#define PESDR1_460SX_HSSL1DAMP		0x355
+#define PESDR1_460SX_HSSL2DAMP		0x356
+#define PESDR1_460SX_HSSL3DAMP		0x357
+
+#define PESDR2_460SX_HSSL0DAMP		0x384
+#define PESDR2_460SX_HSSL1DAMP		0x385
+#define PESDR2_460SX_HSSL2DAMP		0x386
+#define PESDR2_460SX_HSSL3DAMP		0x387
+
+#define PESDR0_460SX_HSSL0COEFA		0x328
+#define PESDR0_460SX_HSSL1COEFA		0x329
+#define PESDR0_460SX_HSSL2COEFA		0x32A
+#define PESDR0_460SX_HSSL3COEFA		0x32B
+#define PESDR0_460SX_HSSL4COEFA		0x32C
+#define PESDR0_460SX_HSSL5COEFA		0x32D
+#define PESDR0_460SX_HSSL6COEFA		0x32E
+#define PESDR0_460SX_HSSL7COEFA		0x32F
+
+#define PESDR1_460SX_HSSL0COEFA		0x358
+#define PESDR1_460SX_HSSL1COEFA		0x359
+#define PESDR1_460SX_HSSL2COEFA		0x35A
+#define PESDR1_460SX_HSSL3COEFA		0x35B
+
+#define PESDR2_460SX_HSSL0COEFA		0x388
+#define PESDR2_460SX_HSSL1COEFA		0x389
+#define PESDR2_460SX_HSSL2COEFA		0x38A
+#define PESDR2_460SX_HSSL3COEFA		0x38B
+
+#define PESDR0_460SX_HSSL1CALDRV	0x339
+#define PESDR1_460SX_HSSL1CALDRV	0x361
+#define PESDR2_460SX_HSSL1CALDRV	0x391
+
+#define PESDR0_460SX_HSSSLEW		0x338
+#define PESDR1_460SX_HSSSLEW		0x360
+#define PESDR2_460SX_HSSSLEW		0x390
+
+#define PESDR0_460SX_HSSCTLSET		0x31E
+#define PESDR1_460SX_HSSCTLSET		0x352
+#define PESDR2_460SX_HSSCTLSET		0x382
+
+#define PESDR0_460SX_RCSSET		0x304
+#define PESDR1_460SX_RCSSET		0x344
+#define PESDR2_460SX_RCSSET		0x374
+/*
+ * Of the above, some are common offsets from the base
+ */
+#define PESDRn_UTLSET1			0x00
+#define PESDRn_UTLSET2			0x01
+#define PESDRn_DLPSET			0x02
+#define PESDRn_LOOP			0x03
+#define PESDRn_RCSSET			0x04
+#define PESDRn_RCSSTS			0x05
+
+/* 440spe only */
+#define PESDRn_440SPE_HSSL0SET1		0x06
+#define PESDRn_440SPE_HSSL0SET2		0x07
+#define PESDRn_440SPE_HSSL0STS		0x08
+#define PESDRn_440SPE_HSSL1SET1		0x09
+#define PESDRn_440SPE_HSSL1SET2		0x0a
+#define PESDRn_440SPE_HSSL1STS		0x0b
+#define PESDRn_440SPE_HSSL2SET1		0x0c
+#define PESDRn_440SPE_HSSL2SET2		0x0d
+#define PESDRn_440SPE_HSSL2STS		0x0e
+#define PESDRn_440SPE_HSSL3SET1		0x0f
+#define PESDRn_440SPE_HSSL3SET2		0x10
+#define PESDRn_440SPE_HSSL3STS		0x11
+
+/* 440spe port 0 only */
+#define PESDRn_440SPE_HSSL4SET1		0x12
+#define PESDRn_440SPE_HSSL4SET2		0x13
+#define PESDRn_440SPE_HSSL4STS	       	0x14
+#define PESDRn_440SPE_HSSL5SET1		0x15
+#define PESDRn_440SPE_HSSL5SET2		0x16
+#define PESDRn_440SPE_HSSL5STS		0x17
+#define PESDRn_440SPE_HSSL6SET1		0x18
+#define PESDRn_440SPE_HSSL6SET2		0x19
+#define PESDRn_440SPE_HSSL6STS		0x1a
+#define PESDRn_440SPE_HSSL7SET1		0x1b
+#define PESDRn_440SPE_HSSL7SET2		0x1c
+#define PESDRn_440SPE_HSSL7STS		0x1d
+
+/* 405ex only */
+#define PESDRn_405EX_PHYSET1		0x06
+#define PESDRn_405EX_PHYSET2		0x07
+#define PESDRn_405EX_PHYSTA		0x0c
+
+/*
+ * UTL register offsets
+ */
+#define PEUTL_PBCTL		0x00
+#define PEUTL_PBBSZ		0x20
+#define PEUTL_OPDBSZ		0x68
+#define PEUTL_IPHBSZ		0x70
+#define PEUTL_IPDBSZ		0x78
+#define PEUTL_OUTTR		0x90
+#define PEUTL_INTR		0x98
+#define PEUTL_PCTL		0xa0
+#define PEUTL_RCSTA		0xB0
+#define PEUTL_RCIRQEN		0xb8
+
+/*
+ * Config space register offsets
+ */
+#define PECFG_ECRTCTL		0x074
+
+#define PECFG_BAR0LMPA		0x210
+#define PECFG_BAR0HMPA		0x214
+#define PECFG_BAR1MPA		0x218
+#define PECFG_BAR2LMPA		0x220
+#define PECFG_BAR2HMPA		0x224
+
+#define PECFG_PIMEN		0x33c
+#define PECFG_PIM0LAL		0x340
+#define PECFG_PIM0LAH		0x344
+#define PECFG_PIM1LAL		0x348
+#define PECFG_PIM1LAH		0x34c
+#define PECFG_PIM01SAL		0x350
+#define PECFG_PIM01SAH		0x354
+
+#define PECFG_POM0LAL		0x380
+#define PECFG_POM0LAH		0x384
+#define PECFG_POM1LAL		0x388
+#define PECFG_POM1LAH		0x38c
+#define PECFG_POM2LAL		0x390
+#define PECFG_POM2LAH		0x394
+
+/* 460sx only */
+#define PECFG_460SX_DLLSTA     0x3f8
+
+/* 460sx Bit Mappings */
+#define PECFG_460SX_DLLSTA_LINKUP	 0x00000010
+#define DCRO_PEGPL_460SX_OMR1MSKL_UOT	 0x00000004
+
+/* PEGPL Bit Mappings */
+#define DCRO_PEGPL_OMRxMSKL_VAL	 0x00000001
+#define DCRO_PEGPL_OMR1MSKL_UOT	 0x00000002
+#define DCRO_PEGPL_OMR3MSKL_IO	 0x00000002
+
+/* 476FPE */
+#define PCCFG_LCPA			0x270
+#define PECFG_TLDLP			0x3F8
+#define PECFG_TLDLP_LNKUP		0x00000008
+#define PECFG_TLDLP_PRESENT		0x00000010
+#define DCRO_PEGPL_476FPE_OMR1MSKL_UOT	 0x00000004
+
+/* SDR Bit Mappings */
+#define PESDRx_RCSSET_HLDPLB	0x10000000
+#define PESDRx_RCSSET_RSTGU	0x01000000
+#define PESDRx_RCSSET_RDY       0x00100000
+#define PESDRx_RCSSET_RSTDL     0x00010000
+#define PESDRx_RCSSET_RSTPYN    0x00001000
+
+enum
+{
+	PTYPE_ENDPOINT		= 0x0,
+	PTYPE_LEGACY_ENDPOINT	= 0x1,
+	PTYPE_ROOT_PORT		= 0x4,
+
+	LNKW_X1			= 0x1,
+	LNKW_X4			= 0x4,
+	LNKW_X8			= 0x8
+};
+
+
+#endif /* __PPC4XX_PCI_H__ */
diff --git a/arch/powerpc/platforms/4xx/soc.c b/arch/powerpc/platforms/4xx/soc.c
new file mode 100644
index 000000000..ac1cd8b17
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/soc.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * IBM/AMCC PPC4xx SoC setup code
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003 - 2006 Zultys Technologies
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <asm/reg.h>
+
+static u32 dcrbase_l2c;
+
+/*
+ * L2-cache
+ */
+
+/* Issue L2C diagnostic command */
+static inline u32 l2c_diag(u32 addr)
+{
+	mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
+	while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+		;
+
+	return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
+}
+
+static irqreturn_t l2c_error_handler(int irq, void *dev)
+{
+	u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
+
+	if (sr & L2C_SR_CPE) {
+		/* Read cache trapped address */
+		u32 addr = l2c_diag(0x42000000);
+		printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
+		       addr);
+	}
+	if (sr & L2C_SR_TPE) {
+		/* Read tag trapped address */
+		u32 addr = l2c_diag(0x82000000) >> 16;
+		printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
+		       addr);
+	}
+
+	/* Clear parity errors */
+	if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
+		mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+		mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+	} else {
+		printk(KERN_EMERG "L2C: LRU error\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __init ppc4xx_l2c_probe(void)
+{
+	struct device_node *np;
+	u32 r;
+	unsigned long flags;
+	int irq;
+	const u32 *dcrreg;
+	u32 dcrbase_isram;
+	int len;
+	const u32 *prop;
+	u32 l2_size;
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
+	if (!np)
+		return 0;
+
+	/* Get l2 cache size */
+	prop = of_get_property(np, "cache-size", NULL);
+	if (prop == NULL) {
+		printk(KERN_ERR "%pOF: Can't get cache-size!\n", np);
+		of_node_put(np);
+		return -ENODEV;
+	}
+	l2_size = prop[0];
+
+	/* Map DCRs */
+	dcrreg = of_get_property(np, "dcr-reg", &len);
+	if (!dcrreg || (len != 4 * sizeof(u32))) {
+		printk(KERN_ERR "%pOF: Can't get DCR register base !", np);
+		of_node_put(np);
+		return -ENODEV;
+	}
+	dcrbase_isram = dcrreg[0];
+	dcrbase_l2c = dcrreg[2];
+
+	/* Get and map irq number from device tree */
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		printk(KERN_ERR "irq_of_parse_and_map failed\n");
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	/* Install error handler */
+	if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) {
+		printk(KERN_ERR "Cannot install L2C error handler"
+		       ", cache is not enabled\n");
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	local_irq_save(flags);
+	asm volatile ("sync" ::: "memory");
+
+	/* Disable SRAM */
+	mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
+
+	/* Enable L2_MODE without ICU/DCU */
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
+		~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
+	r |= L2C_CFG_L2M | L2C_CFG_SS_256;
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+	mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+
+	/* Hardware Clear Command */
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
+	while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+		;
+
+	/* Clear Cache Parity and Tag Errors */
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+
+	/* Enable 64G snoop region starting at 0 */
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
+		~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+	r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
+	mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
+
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
+		~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+	r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
+	mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
+
+	asm volatile ("sync" ::: "memory");
+
+	/* Enable ICU/DCU ports */
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
+	r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
+	       | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
+	r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
+		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
+
+	/* Check for 460EX/GT special handling */
+	if (of_device_is_compatible(np, "ibm,l2-cache-460ex") ||
+	    of_device_is_compatible(np, "ibm,l2-cache-460gt"))
+		r |= L2C_CFG_RDBW;
+
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+	asm volatile ("sync; isync" ::: "memory");
+	local_irq_restore(flags);
+
+	printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
+
+	of_node_put(np);
+	return 0;
+}
+arch_initcall(ppc4xx_l2c_probe);
+
+/*
+ * Apply a system reset. Alternatively a board specific value may be
+ * provided via the "reset-type" property in the cpu node.
+ */
+void ppc4xx_reset_system(char *cmd)
+{
+	struct device_node *np;
+	u32 reset_type = DBCR0_RST_SYSTEM;
+	const u32 *prop;
+
+	np = of_get_cpu_node(0, NULL);
+	if (np) {
+		prop = of_get_property(np, "reset-type", NULL);
+
+		/*
+		 * Check if property exists and if it is in range:
+		 * 1 - PPC4xx core reset
+		 * 2 - PPC4xx chip reset
+		 * 3 - PPC4xx system reset (default)
+		 */
+		if ((prop) && ((prop[0] >= 1) && (prop[0] <= 3)))
+			reset_type = prop[0] << 28;
+	}
+
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | reset_type);
+
+	while (1)
+		;	/* Just in case the reset doesn't work */
+}
diff --git a/arch/powerpc/platforms/4xx/uic.c b/arch/powerpc/platforms/4xx/uic.c
new file mode 100644
index 000000000..36fb66ce5
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/uic.c
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/powerpc/sysdev/uic.c
+ *
+ * IBM PowerPC 4xx Universal Interrupt Controller
+ *
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/dcr.h>
+
+#define NR_UIC_INTS	32
+
+#define UIC_SR		0x0
+#define UIC_ER		0x2
+#define UIC_CR		0x3
+#define UIC_PR		0x4
+#define UIC_TR		0x5
+#define UIC_MSR		0x6
+#define UIC_VR		0x7
+#define UIC_VCR		0x8
+
+struct uic *primary_uic;
+
+struct uic {
+	int index;
+	int dcrbase;
+
+	raw_spinlock_t lock;
+
+	/* The remapper for this UIC */
+	struct irq_domain	*irqhost;
+};
+
+static void uic_unmask_irq(struct irq_data *d)
+{
+	struct uic *uic = irq_data_get_irq_chip_data(d);
+	unsigned int src = irqd_to_hwirq(d);
+	unsigned long flags;
+	u32 er, sr;
+
+	sr = 1 << (31-src);
+	raw_spin_lock_irqsave(&uic->lock, flags);
+	/* ack level-triggered interrupts here */
+	if (irqd_is_level_type(d))
+		mtdcr(uic->dcrbase + UIC_SR, sr);
+	er = mfdcr(uic->dcrbase + UIC_ER);
+	er |= sr;
+	mtdcr(uic->dcrbase + UIC_ER, er);
+	raw_spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_mask_irq(struct irq_data *d)
+{
+	struct uic *uic = irq_data_get_irq_chip_data(d);
+	unsigned int src = irqd_to_hwirq(d);
+	unsigned long flags;
+	u32 er;
+
+	raw_spin_lock_irqsave(&uic->lock, flags);
+	er = mfdcr(uic->dcrbase + UIC_ER);
+	er &= ~(1 << (31 - src));
+	mtdcr(uic->dcrbase + UIC_ER, er);
+	raw_spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_ack_irq(struct irq_data *d)
+{
+	struct uic *uic = irq_data_get_irq_chip_data(d);
+	unsigned int src = irqd_to_hwirq(d);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&uic->lock, flags);
+	mtdcr(uic->dcrbase + UIC_SR, 1 << (31-src));
+	raw_spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_mask_ack_irq(struct irq_data *d)
+{
+	struct uic *uic = irq_data_get_irq_chip_data(d);
+	unsigned int src = irqd_to_hwirq(d);
+	unsigned long flags;
+	u32 er, sr;
+
+	sr = 1 << (31-src);
+	raw_spin_lock_irqsave(&uic->lock, flags);
+	er = mfdcr(uic->dcrbase + UIC_ER);
+	er &= ~sr;
+	mtdcr(uic->dcrbase + UIC_ER, er);
+ 	/* On the UIC, acking (i.e. clearing the SR bit)
+	 * a level irq will have no effect if the interrupt
+	 * is still asserted by the device, even if
+	 * the interrupt is already masked. Therefore
+	 * we only ack the egde interrupts here, while
+	 * level interrupts are ack'ed after the actual
+	 * isr call in the uic_unmask_irq()
+	 */
+	if (!irqd_is_level_type(d))
+		mtdcr(uic->dcrbase + UIC_SR, sr);
+	raw_spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static int uic_set_irq_type(struct irq_data *d, unsigned int flow_type)
+{
+	struct uic *uic = irq_data_get_irq_chip_data(d);
+	unsigned int src = irqd_to_hwirq(d);
+	unsigned long flags;
+	int trigger, polarity;
+	u32 tr, pr, mask;
+
+	switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_NONE:
+		uic_mask_irq(d);
+		return 0;
+
+	case IRQ_TYPE_EDGE_RISING:
+		trigger = 1; polarity = 1;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		trigger = 1; polarity = 0;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		trigger = 0; polarity = 1;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		trigger = 0; polarity = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mask = ~(1 << (31 - src));
+
+	raw_spin_lock_irqsave(&uic->lock, flags);
+	tr = mfdcr(uic->dcrbase + UIC_TR);
+	pr = mfdcr(uic->dcrbase + UIC_PR);
+	tr = (tr & mask) | (trigger << (31-src));
+	pr = (pr & mask) | (polarity << (31-src));
+
+	mtdcr(uic->dcrbase + UIC_PR, pr);
+	mtdcr(uic->dcrbase + UIC_TR, tr);
+	mtdcr(uic->dcrbase + UIC_SR, ~mask);
+
+	raw_spin_unlock_irqrestore(&uic->lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip uic_irq_chip = {
+	.name		= "UIC",
+	.irq_unmask	= uic_unmask_irq,
+	.irq_mask	= uic_mask_irq,
+	.irq_mask_ack	= uic_mask_ack_irq,
+	.irq_ack	= uic_ack_irq,
+	.irq_set_type	= uic_set_irq_type,
+};
+
+static int uic_host_map(struct irq_domain *h, unsigned int virq,
+			irq_hw_number_t hw)
+{
+	struct uic *uic = h->host_data;
+
+	irq_set_chip_data(virq, uic);
+	/* Despite the name, handle_level_irq() works for both level
+	 * and edge irqs on UIC.  FIXME: check this is correct */
+	irq_set_chip_and_handler(virq, &uic_irq_chip, handle_level_irq);
+
+	/* Set default irq type */
+	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static const struct irq_domain_ops uic_host_ops = {
+	.map	= uic_host_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static void uic_irq_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct irq_data *idata = irq_desc_get_irq_data(desc);
+	struct uic *uic = irq_desc_get_handler_data(desc);
+	u32 msr;
+	int src;
+	int subvirq;
+
+	raw_spin_lock(&desc->lock);
+	if (irqd_is_level_type(idata))
+		chip->irq_mask(idata);
+	else
+		chip->irq_mask_ack(idata);
+	raw_spin_unlock(&desc->lock);
+
+	msr = mfdcr(uic->dcrbase + UIC_MSR);
+	if (!msr) /* spurious interrupt */
+		goto uic_irq_ret;
+
+	src = 32 - ffs(msr);
+
+	subvirq = irq_linear_revmap(uic->irqhost, src);
+	generic_handle_irq(subvirq);
+
+uic_irq_ret:
+	raw_spin_lock(&desc->lock);
+	if (irqd_is_level_type(idata))
+		chip->irq_ack(idata);
+	if (!irqd_irq_disabled(idata) && chip->irq_unmask)
+		chip->irq_unmask(idata);
+	raw_spin_unlock(&desc->lock);
+}
+
+static struct uic * __init uic_init_one(struct device_node *node)
+{
+	struct uic *uic;
+	const u32 *indexp, *dcrreg;
+	int len;
+
+	BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
+
+	uic = kzalloc(sizeof(*uic), GFP_KERNEL);
+	if (! uic)
+		return NULL; /* FIXME: panic? */
+
+	raw_spin_lock_init(&uic->lock);
+	indexp = of_get_property(node, "cell-index", &len);
+	if (!indexp || (len != sizeof(u32))) {
+		printk(KERN_ERR "uic: Device node %pOF has missing or invalid "
+		       "cell-index property\n", node);
+		return NULL;
+	}
+	uic->index = *indexp;
+
+	dcrreg = of_get_property(node, "dcr-reg", &len);
+	if (!dcrreg || (len != 2*sizeof(u32))) {
+		printk(KERN_ERR "uic: Device node %pOF has missing or invalid "
+		       "dcr-reg property\n", node);
+		return NULL;
+	}
+	uic->dcrbase = *dcrreg;
+
+	uic->irqhost = irq_domain_add_linear(node, NR_UIC_INTS, &uic_host_ops,
+					     uic);
+	if (! uic->irqhost)
+		return NULL; /* FIXME: panic? */
+
+	/* Start with all interrupts disabled, level and non-critical */
+	mtdcr(uic->dcrbase + UIC_ER, 0);
+	mtdcr(uic->dcrbase + UIC_CR, 0);
+	mtdcr(uic->dcrbase + UIC_TR, 0);
+	/* Clear any pending interrupts, in case the firmware left some */
+	mtdcr(uic->dcrbase + UIC_SR, 0xffffffff);
+
+	printk ("UIC%d (%d IRQ sources) at DCR 0x%x\n", uic->index,
+		NR_UIC_INTS, uic->dcrbase);
+
+	return uic;
+}
+
+void __init uic_init_tree(void)
+{
+	struct device_node *np;
+	struct uic *uic;
+	const u32 *interrupts;
+
+	/* First locate and initialize the top-level UIC */
+	for_each_compatible_node(np, NULL, "ibm,uic") {
+		interrupts = of_get_property(np, "interrupts", NULL);
+		if (!interrupts)
+			break;
+	}
+
+	BUG_ON(!np); /* uic_init_tree() assumes there's a UIC as the
+		      * top-level interrupt controller */
+	primary_uic = uic_init_one(np);
+	if (!primary_uic)
+		panic("Unable to initialize primary UIC %pOF\n", np);
+
+	irq_set_default_host(primary_uic->irqhost);
+	of_node_put(np);
+
+	/* The scan again for cascaded UICs */
+	for_each_compatible_node(np, NULL, "ibm,uic") {
+		interrupts = of_get_property(np, "interrupts", NULL);
+		if (interrupts) {
+			/* Secondary UIC */
+			int cascade_virq;
+
+			uic = uic_init_one(np);
+			if (! uic)
+				panic("Unable to initialize a secondary UIC %pOF\n",
+				      np);
+
+			cascade_virq = irq_of_parse_and_map(np, 0);
+
+			irq_set_handler_data(cascade_virq, uic);
+			irq_set_chained_handler(cascade_virq, uic_irq_cascade);
+
+			/* FIXME: setup critical cascade?? */
+		}
+	}
+}
+
+/* Return an interrupt vector or 0 if no interrupt is pending. */
+unsigned int uic_get_irq(void)
+{
+	u32 msr;
+	int src;
+
+	BUG_ON(! primary_uic);
+
+	msr = mfdcr(primary_uic->dcrbase + UIC_MSR);
+	src = 32 - ffs(msr);
+
+	return irq_linear_revmap(primary_uic->irqhost, src);
+}