Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 669 insertions, 0 deletions

diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
new file mode 100644
index 000000000..6d0df6a58
--- /dev/null
+++ b/arch/x86/kernel/quirks.c
@@ -0,0 +1,669 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file contains work-arounds for x86 and x86_64 platform bugs.
+ */
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+
+#include <asm/hpet.h>
+#include <asm/setup.h>
+#include <asm/mce.h>
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
+
+static void quirk_intel_irqbalance(struct pci_dev *dev)
+{
+	u8 config;
+	u16 word;
+
+	/* BIOS may enable hardware IRQ balancing for
+	 * E7520/E7320/E7525(revision ID 0x9 and below)
+	 * based platforms.
+	 * Disable SW irqbalance/affinity on those platforms.
+	 */
+	if (dev->revision > 0x9)
+		return;
+
+	/* enable access to config space*/
+	pci_read_config_byte(dev, 0xf4, &config);
+	pci_write_config_byte(dev, 0xf4, config|0x2);
+
+	/*
+	 * read xTPR register.  We may not have a pci_dev for device 8
+	 * because it might be hidden until the above write.
+	 */
+	pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word);
+
+	if (!(word & (1 << 13))) {
+		dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
+			"disabling irq balancing and affinity\n");
+		noirqdebug_setup("");
+#ifdef CONFIG_PROC_FS
+		no_irq_affinity = 1;
+#endif
+	}
+
+	/* put back the original value for config space*/
+	if (!(config & 0x2))
+		pci_write_config_byte(dev, 0xf4, config);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH,
+			quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH,
+			quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH,
+			quirk_intel_irqbalance);
+#endif
+
+#if defined(CONFIG_HPET_TIMER)
+unsigned long force_hpet_address;
+
+static enum {
+	NONE_FORCE_HPET_RESUME,
+	OLD_ICH_FORCE_HPET_RESUME,
+	ICH_FORCE_HPET_RESUME,
+	VT8237_FORCE_HPET_RESUME,
+	NVIDIA_FORCE_HPET_RESUME,
+	ATI_FORCE_HPET_RESUME,
+} force_hpet_resume_type;
+
+static void __iomem *rcba_base;
+
+static void ich_force_hpet_resume(void)
+{
+	u32 val;
+
+	if (!force_hpet_address)
+		return;
+
+	BUG_ON(rcba_base == NULL);
+
+	/* read the Function Disable register, dword mode only */
+	val = readl(rcba_base + 0x3404);
+	if (!(val & 0x80)) {
+		/* HPET disabled in HPTC. Trying to enable */
+		writel(val | 0x80, rcba_base + 0x3404);
+	}
+
+	val = readl(rcba_base + 0x3404);
+	if (!(val & 0x80))
+		BUG();
+	else
+		printk(KERN_DEBUG "Force enabled HPET at resume\n");
+}
+
+static void ich_force_enable_hpet(struct pci_dev *dev)
+{
+	u32 val;
+	u32 rcba;
+	int err = 0;
+
+	if (hpet_address || force_hpet_address)
+		return;
+
+	pci_read_config_dword(dev, 0xF0, &rcba);
+	rcba &= 0xFFFFC000;
+	if (rcba == 0) {
+		dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
+			"cannot force enable HPET\n");
+		return;
+	}
+
+	/* use bits 31:14, 16 kB aligned */
+	rcba_base = ioremap(rcba, 0x4000);
+	if (rcba_base == NULL) {
+		dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
+			"cannot force enable HPET\n");
+		return;
+	}
+
+	/* read the Function Disable register, dword mode only */
+	val = readl(rcba_base + 0x3404);
+
+	if (val & 0x80) {
+		/* HPET is enabled in HPTC. Just not reported by BIOS */
+		val = val & 0x3;
+		force_hpet_address = 0xFED00000 | (val << 12);
+		dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+			"0x%lx\n", force_hpet_address);
+		iounmap(rcba_base);
+		return;
+	}
+
+	/* HPET disabled in HPTC. Trying to enable */
+	writel(val | 0x80, rcba_base + 0x3404);
+
+	val = readl(rcba_base + 0x3404);
+	if (!(val & 0x80)) {
+		err = 1;
+	} else {
+		val = val & 0x3;
+		force_hpet_address = 0xFED00000 | (val << 12);
+	}
+
+	if (err) {
+		force_hpet_address = 0;
+		iounmap(rcba_base);
+		dev_printk(KERN_DEBUG, &dev->dev,
+			"Failed to force enable HPET\n");
+	} else {
+		force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
+		dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+			"0x%lx\n", force_hpet_address);
+	}
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
+			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
+			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
+			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
+			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
+			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
+			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
+			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4,
+			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
+			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16,	/* ICH10 */
+			 ich_force_enable_hpet);
+
+static struct pci_dev *cached_dev;
+
+static void hpet_print_force_info(void)
+{
+	printk(KERN_INFO "HPET not enabled in BIOS. "
+	       "You might try hpet=force boot option\n");
+}
+
+static void old_ich_force_hpet_resume(void)
+{
+	u32 val;
+	u32 gen_cntl;
+
+	if (!force_hpet_address || !cached_dev)
+		return;
+
+	pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
+	gen_cntl &= (~(0x7 << 15));
+	gen_cntl |= (0x4 << 15);
+
+	pci_write_config_dword(cached_dev, 0xD0, gen_cntl);
+	pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
+	val = gen_cntl >> 15;
+	val &= 0x7;
+	if (val == 0x4)
+		printk(KERN_DEBUG "Force enabled HPET at resume\n");
+	else
+		BUG();
+}
+
+static void old_ich_force_enable_hpet(struct pci_dev *dev)
+{
+	u32 val;
+	u32 gen_cntl;
+
+	if (hpet_address || force_hpet_address)
+		return;
+
+	pci_read_config_dword(dev, 0xD0, &gen_cntl);
+	/*
+	 * Bit 17 is HPET enable bit.
+	 * Bit 16:15 control the HPET base address.
+	 */
+	val = gen_cntl >> 15;
+	val &= 0x7;
+	if (val & 0x4) {
+		val &= 0x3;
+		force_hpet_address = 0xFED00000 | (val << 12);
+		dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+			force_hpet_address);
+		return;
+	}
+
+	/*
+	 * HPET is disabled. Trying enabling at FED00000 and check
+	 * whether it sticks
+	 */
+	gen_cntl &= (~(0x7 << 15));
+	gen_cntl |= (0x4 << 15);
+	pci_write_config_dword(dev, 0xD0, gen_cntl);
+
+	pci_read_config_dword(dev, 0xD0, &gen_cntl);
+
+	val = gen_cntl >> 15;
+	val &= 0x7;
+	if (val & 0x4) {
+		/* HPET is enabled in HPTC. Just not reported by BIOS */
+		val &= 0x3;
+		force_hpet_address = 0xFED00000 | (val << 12);
+		dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+			"0x%lx\n", force_hpet_address);
+		cached_dev = dev;
+		force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
+		return;
+	}
+
+	dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
+}
+
+/*
+ * Undocumented chipset features. Make sure that the user enforced
+ * this.
+ */
+static void old_ich_force_enable_hpet_user(struct pci_dev *dev)
+{
+	if (hpet_force_user)
+		old_ich_force_enable_hpet(dev);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
+			 old_ich_force_enable_hpet_user);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
+			 old_ich_force_enable_hpet_user);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,
+			 old_ich_force_enable_hpet_user);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
+			 old_ich_force_enable_hpet_user);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,
+			 old_ich_force_enable_hpet_user);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
+			 old_ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12,
+			 old_ich_force_enable_hpet);
+
+
+static void vt8237_force_hpet_resume(void)
+{
+	u32 val;
+
+	if (!force_hpet_address || !cached_dev)
+		return;
+
+	val = 0xfed00000 | 0x80;
+	pci_write_config_dword(cached_dev, 0x68, val);
+
+	pci_read_config_dword(cached_dev, 0x68, &val);
+	if (val & 0x80)
+		printk(KERN_DEBUG "Force enabled HPET at resume\n");
+	else
+		BUG();
+}
+
+static void vt8237_force_enable_hpet(struct pci_dev *dev)
+{
+	u32 val;
+
+	if (hpet_address || force_hpet_address)
+		return;
+
+	if (!hpet_force_user) {
+		hpet_print_force_info();
+		return;
+	}
+
+	pci_read_config_dword(dev, 0x68, &val);
+	/*
+	 * Bit 7 is HPET enable bit.
+	 * Bit 31:10 is HPET base address (contrary to what datasheet claims)
+	 */
+	if (val & 0x80) {
+		force_hpet_address = (val & ~0x3ff);
+		dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+			force_hpet_address);
+		return;
+	}
+
+	/*
+	 * HPET is disabled. Trying enabling at FED00000 and check
+	 * whether it sticks
+	 */
+	val = 0xfed00000 | 0x80;
+	pci_write_config_dword(dev, 0x68, val);
+
+	pci_read_config_dword(dev, 0x68, &val);
+	if (val & 0x80) {
+		force_hpet_address = (val & ~0x3ff);
+		dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+			"0x%lx\n", force_hpet_address);
+		cached_dev = dev;
+		force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
+		return;
+	}
+
+	dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
+			 vt8237_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
+			 vt8237_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700,
+			 vt8237_force_enable_hpet);
+
+static void ati_force_hpet_resume(void)
+{
+	pci_write_config_dword(cached_dev, 0x14, 0xfed00000);
+	printk(KERN_DEBUG "Force enabled HPET at resume\n");
+}
+
+static u32 ati_ixp4x0_rev(struct pci_dev *dev)
+{
+	int err = 0;
+	u32 d = 0;
+	u8  b = 0;
+
+	err = pci_read_config_byte(dev, 0xac, &b);
+	b &= ~(1<<5);
+	err |= pci_write_config_byte(dev, 0xac, b);
+	err |= pci_read_config_dword(dev, 0x70, &d);
+	d |= 1<<8;
+	err |= pci_write_config_dword(dev, 0x70, d);
+	err |= pci_read_config_dword(dev, 0x8, &d);
+	d &= 0xff;
+	dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d);
+
+	WARN_ON_ONCE(err);
+
+	return d;
+}
+
+static void ati_force_enable_hpet(struct pci_dev *dev)
+{
+	u32 d, val;
+	u8  b;
+
+	if (hpet_address || force_hpet_address)
+		return;
+
+	if (!hpet_force_user) {
+		hpet_print_force_info();
+		return;
+	}
+
+	d = ati_ixp4x0_rev(dev);
+	if (d  < 0x82)
+		return;
+
+	/* base address */
+	pci_write_config_dword(dev, 0x14, 0xfed00000);
+	pci_read_config_dword(dev, 0x14, &val);
+
+	/* enable interrupt */
+	outb(0x72, 0xcd6); b = inb(0xcd7);
+	b |= 0x1;
+	outb(0x72, 0xcd6); outb(b, 0xcd7);
+	outb(0x72, 0xcd6); b = inb(0xcd7);
+	if (!(b & 0x1))
+		return;
+	pci_read_config_dword(dev, 0x64, &d);
+	d |= (1<<10);
+	pci_write_config_dword(dev, 0x64, d);
+	pci_read_config_dword(dev, 0x64, &d);
+	if (!(d & (1<<10)))
+		return;
+
+	force_hpet_address = val;
+	force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
+	dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
+		   force_hpet_address);
+	cached_dev = dev;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
+			 ati_force_enable_hpet);
+
+/*
+ * Undocumented chipset feature taken from LinuxBIOS.
+ */
+static void nvidia_force_hpet_resume(void)
+{
+	pci_write_config_dword(cached_dev, 0x44, 0xfed00001);
+	printk(KERN_DEBUG "Force enabled HPET at resume\n");
+}
+
+static void nvidia_force_enable_hpet(struct pci_dev *dev)
+{
+	u32 val;
+
+	if (hpet_address || force_hpet_address)
+		return;
+
+	if (!hpet_force_user) {
+		hpet_print_force_info();
+		return;
+	}
+
+	pci_write_config_dword(dev, 0x44, 0xfed00001);
+	pci_read_config_dword(dev, 0x44, &val);
+	force_hpet_address = val & 0xfffffffe;
+	force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
+	dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
+		force_hpet_address);
+	cached_dev = dev;
+}
+
+/* ISA Bridges */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0050,
+			nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051,
+			nvidia_force_enable_hpet);
+
+/* LPC bridges */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260,
+			nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360,
+			nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361,
+			nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0362,
+			nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0363,
+			nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0364,
+			nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0365,
+			nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0366,
+			nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0367,
+			nvidia_force_enable_hpet);
+
+void force_hpet_resume(void)
+{
+	switch (force_hpet_resume_type) {
+	case ICH_FORCE_HPET_RESUME:
+		ich_force_hpet_resume();
+		return;
+	case OLD_ICH_FORCE_HPET_RESUME:
+		old_ich_force_hpet_resume();
+		return;
+	case VT8237_FORCE_HPET_RESUME:
+		vt8237_force_hpet_resume();
+		return;
+	case NVIDIA_FORCE_HPET_RESUME:
+		nvidia_force_hpet_resume();
+		return;
+	case ATI_FORCE_HPET_RESUME:
+		ati_force_hpet_resume();
+		return;
+	default:
+		break;
+	}
+}
+
+/*
+ * According to the datasheet e6xx systems have the HPET hardwired to
+ * 0xfed00000
+ */
+static void e6xx_force_enable_hpet(struct pci_dev *dev)
+{
+	if (hpet_address || force_hpet_address)
+		return;
+
+	force_hpet_address = 0xFED00000;
+	force_hpet_resume_type = NONE_FORCE_HPET_RESUME;
+	dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+		"0x%lx\n", force_hpet_address);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E6XX_CU,
+			 e6xx_force_enable_hpet);
+
+/*
+ * HPET MSI on some boards (ATI SB700/SB800) has side effect on
+ * floppy DMA. Disable HPET MSI on such platforms.
+ * See erratum #27 (Misinterpreted MSI Requests May Result in
+ * Corrupted LPC DMA Data) in AMD Publication #46837,
+ * "SB700 Family Product Errata", Rev. 1.0, March 2010.
+ */
+static void force_disable_hpet_msi(struct pci_dev *unused)
+{
+	hpet_msi_disable = true;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+			 force_disable_hpet_msi);
+
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
+/* Set correct numa_node information for AMD NB functions */
+static void quirk_amd_nb_node(struct pci_dev *dev)
+{
+	struct pci_dev *nb_ht;
+	unsigned int devfn;
+	u32 node;
+	u32 val;
+
+	devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
+	nb_ht = pci_get_slot(dev->bus, devfn);
+	if (!nb_ht)
+		return;
+
+	pci_read_config_dword(nb_ht, 0x60, &val);
+	node = pcibus_to_node(dev->bus) | (val & 7);
+	/*
+	 * Some hardware may return an invalid node ID,
+	 * so check it first:
+	 */
+	if (node_online(node))
+		set_dev_node(&dev->dev, node);
+	pci_dev_put(nb_ht);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_HT,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MAP,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5,
+			quirk_amd_nb_node);
+
+#endif
+
+#ifdef CONFIG_PCI
+/*
+ * Processor does not ensure DRAM scrub read/write sequence
+ * is atomic wrt accesses to CC6 save state area. Therefore
+ * if a concurrent scrub read/write access is to same address
+ * the entry may appear as if it is not written. This quirk
+ * applies to Fam16h models 00h-0Fh
+ *
+ * See "Revision Guide" for AMD F16h models 00h-0fh,
+ * document 51810 rev. 3.04, Nov 2013
+ */
+static void amd_disable_seq_and_redirect_scrub(struct pci_dev *dev)
+{
+	u32 val;
+
+	/*
+	 * Suggested workaround:
+	 * set D18F3x58[4:0] = 00h and set D18F3x5C[0] = 0b
+	 */
+	pci_read_config_dword(dev, 0x58, &val);
+	if (val & 0x1F) {
+		val &= ~(0x1F);
+		pci_write_config_dword(dev, 0x58, val);
+	}
+
+	pci_read_config_dword(dev, 0x5C, &val);
+	if (val & BIT(0)) {
+		val &= ~BIT(0);
+		pci_write_config_dword(dev, 0x5c, val);
+	}
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3,
+			amd_disable_seq_and_redirect_scrub);
+
+/* Ivy Bridge, Haswell, Broadwell */
+static void quirk_intel_brickland_xeon_ras_cap(struct pci_dev *pdev)
+{
+	u32 capid0;
+
+	pci_read_config_dword(pdev, 0x84, &capid0);
+
+	if (capid0 & 0x10)
+		enable_copy_mc_fragile();
+}
+
+/* Skylake */
+static void quirk_intel_purley_xeon_ras_cap(struct pci_dev *pdev)
+{
+	u32 capid0, capid5;
+
+	pci_read_config_dword(pdev, 0x84, &capid0);
+	pci_read_config_dword(pdev, 0x98, &capid5);
+
+	/*
+	 * CAPID0{7:6} indicate whether this is an advanced RAS SKU
+	 * CAPID5{8:5} indicate that various NVDIMM usage modes are
+	 * enabled, so memory machine check recovery is also enabled.
+	 */
+	if ((capid0 & 0xc0) == 0xc0 || (capid5 & 0x1e0))
+		enable_copy_mc_fragile();
+
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0ec3, quirk_intel_brickland_xeon_ras_cap);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, quirk_intel_brickland_xeon_ras_cap);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, quirk_intel_brickland_xeon_ras_cap);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2083, quirk_intel_purley_xeon_ras_cap);
+#endif
+
+bool x86_apple_machine;
+EXPORT_SYMBOL(x86_apple_machine);
+
+void __init early_platform_quirks(void)
+{
+	x86_apple_machine = dmi_match(DMI_SYS_VENDOR, "Apple Inc.") ||
+			    dmi_match(DMI_SYS_VENDOR, "Apple Computer, Inc.");
+}