Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 425 insertions, 0 deletions

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
new file mode 100644
index 000000000..948656069
--- /dev/null
+++ b/arch/x86/pci/acpi.c
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <linux/pci-acpi.h>
+#include <asm/numa.h>
+#include <asm/pci_x86.h>
+
+struct pci_root_info {
+	struct acpi_pci_root_info common;
+	struct pci_sysdata sd;
+#ifdef	CONFIG_PCI_MMCONFIG
+	bool mcfg_added;
+	u8 start_bus;
+	u8 end_bus;
+#endif
+};
+
+static bool pci_use_crs = true;
+static bool pci_ignore_seg = false;
+
+static int __init set_use_crs(const struct dmi_system_id *id)
+{
+	pci_use_crs = true;
+	return 0;
+}
+
+static int __init set_nouse_crs(const struct dmi_system_id *id)
+{
+	pci_use_crs = false;
+	return 0;
+}
+
+static int __init set_ignore_seg(const struct dmi_system_id *id)
+{
+	printk(KERN_INFO "PCI: %s detected: ignoring ACPI _SEG\n", id->ident);
+	pci_ignore_seg = true;
+	return 0;
+}
+
+static const struct dmi_system_id pci_crs_quirks[] __initconst = {
+	/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
+	{
+		.callback = set_use_crs,
+		.ident = "IBM System x3800",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
+		},
+	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */
+	/* 2006 AMD HT/VIA system with two host bridges */
+        {
+		.callback = set_use_crs,
+		.ident = "ASRock ALiveSATA2-GLAN",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
+                },
+        },
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */
+	/* 2006 AMD HT/VIA system with two host bridges */
+	{
+		.callback = set_use_crs,
+		.ident = "ASUS M2V-MX SE",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+		},
+	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
+	{
+		.callback = set_use_crs,
+		.ident = "MSI MS-7253",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
+	/* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 */
+	/* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299 */
+	{
+		.callback = set_use_crs,
+		.ident = "Foxconn K8M890-8237A",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Foxconn"),
+			DMI_MATCH(DMI_BOARD_NAME, "K8M890-8237A"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
+
+	/* Now for the blacklist.. */
+
+	/* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
+	{
+		.callback = set_nouse_crs,
+		.ident = "Dell Studio 1557",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"),
+			DMI_MATCH(DMI_BIOS_VERSION, "A09"),
+		},
+	},
+	/* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
+	{
+		.callback = set_nouse_crs,
+		.ident = "Thinkpad SL510",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "2847DFG"),
+			DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"),
+		},
+	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=42606 */
+	{
+		.callback = set_nouse_crs,
+		.ident = "Supermicro X8DTH",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X8DTH-i/6/iF/6F"),
+			DMI_MATCH(DMI_BIOS_VERSION, "2.0a"),
+		},
+	},
+
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */
+	{
+		.callback = set_ignore_seg,
+		.ident = "HP xw9300",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
+		},
+	},
+	{}
+};
+
+void __init pci_acpi_crs_quirks(void)
+{
+	int year = dmi_get_bios_year();
+
+	if (year >= 0 && year < 2008 && iomem_resource.end <= 0xffffffff)
+		pci_use_crs = false;
+
+	dmi_check_system(pci_crs_quirks);
+
+	/*
+	 * If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
+	 * takes precedence over anything we figured out above.
+	 */
+	if (pci_probe & PCI_ROOT_NO_CRS)
+		pci_use_crs = false;
+	else if (pci_probe & PCI_USE__CRS)
+		pci_use_crs = true;
+
+	printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
+	       "if necessary, use \"pci=%s\" and report a bug\n",
+	       pci_use_crs ? "Using" : "Ignoring",
+	       pci_use_crs ? "nocrs" : "use_crs");
+}
+
+#ifdef	CONFIG_PCI_MMCONFIG
+static int check_segment(u16 seg, struct device *dev, char *estr)
+{
+	if (seg) {
+		dev_err(dev,
+			"%s can't access PCI configuration "
+			"space under this host bridge.\n",
+			estr);
+		return -EIO;
+	}
+
+	/*
+	 * Failure in adding MMCFG information is not fatal,
+	 * just can't access extended configuration space of
+	 * devices under this host bridge.
+	 */
+	dev_warn(dev,
+		 "%s can't access extended PCI configuration "
+		 "space under this bridge.\n",
+		 estr);
+
+	return 0;
+}
+
+static int setup_mcfg_map(struct acpi_pci_root_info *ci)
+{
+	int result, seg;
+	struct pci_root_info *info;
+	struct acpi_pci_root *root = ci->root;
+	struct device *dev = &ci->bridge->dev;
+
+	info = container_of(ci, struct pci_root_info, common);
+	info->start_bus = (u8)root->secondary.start;
+	info->end_bus = (u8)root->secondary.end;
+	info->mcfg_added = false;
+	seg = info->sd.domain;
+
+	/* return success if MMCFG is not in use */
+	if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
+		return 0;
+
+	if (!(pci_probe & PCI_PROBE_MMCONF))
+		return check_segment(seg, dev, "MMCONFIG is disabled,");
+
+	result = pci_mmconfig_insert(dev, seg, info->start_bus, info->end_bus,
+				     root->mcfg_addr);
+	if (result == 0) {
+		/* enable MMCFG if it hasn't been enabled yet */
+		if (raw_pci_ext_ops == NULL)
+			raw_pci_ext_ops = &pci_mmcfg;
+		info->mcfg_added = true;
+	} else if (result != -EEXIST)
+		return check_segment(seg, dev,
+			 "fail to add MMCONFIG information,");
+
+	return 0;
+}
+
+static void teardown_mcfg_map(struct acpi_pci_root_info *ci)
+{
+	struct pci_root_info *info;
+
+	info = container_of(ci, struct pci_root_info, common);
+	if (info->mcfg_added) {
+		pci_mmconfig_delete(info->sd.domain,
+				    info->start_bus, info->end_bus);
+		info->mcfg_added = false;
+	}
+}
+#else
+static int setup_mcfg_map(struct acpi_pci_root_info *ci)
+{
+	return 0;
+}
+
+static void teardown_mcfg_map(struct acpi_pci_root_info *ci)
+{
+}
+#endif
+
+static int pci_acpi_root_get_node(struct acpi_pci_root *root)
+{
+	int busnum = root->secondary.start;
+	struct acpi_device *device = root->device;
+	int node = acpi_get_node(device->handle);
+
+	if (node == NUMA_NO_NODE) {
+		node = x86_pci_root_bus_node(busnum);
+		if (node != 0 && node != NUMA_NO_NODE)
+			dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
+				node);
+	}
+	if (node != NUMA_NO_NODE && !node_online(node))
+		node = NUMA_NO_NODE;
+
+	return node;
+}
+
+static int pci_acpi_root_init_info(struct acpi_pci_root_info *ci)
+{
+	return setup_mcfg_map(ci);
+}
+
+static void pci_acpi_root_release_info(struct acpi_pci_root_info *ci)
+{
+	teardown_mcfg_map(ci);
+	kfree(container_of(ci, struct pci_root_info, common));
+}
+
+/*
+ * An IO port or MMIO resource assigned to a PCI host bridge may be
+ * consumed by the host bridge itself or available to its child
+ * bus/devices. The ACPI specification defines a bit (Producer/Consumer)
+ * to tell whether the resource is consumed by the host bridge itself,
+ * but firmware hasn't used that bit consistently, so we can't rely on it.
+ *
+ * On x86 and IA64 platforms, all IO port and MMIO resources are assumed
+ * to be available to child bus/devices except one special case:
+ *     IO port [0xCF8-0xCFF] is consumed by the host bridge itself
+ *     to access PCI configuration space.
+ *
+ * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
+ */
+static bool resource_is_pcicfg_ioport(struct resource *res)
+{
+	return (res->flags & IORESOURCE_IO) &&
+		res->start == 0xCF8 && res->end == 0xCFF;
+}
+
+static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
+{
+	struct acpi_device *device = ci->bridge;
+	int busnum = ci->root->secondary.start;
+	struct resource_entry *entry, *tmp;
+	int status;
+
+	status = acpi_pci_probe_root_resources(ci);
+	if (pci_use_crs) {
+		resource_list_for_each_entry_safe(entry, tmp, &ci->resources)
+			if (resource_is_pcicfg_ioport(entry->res))
+				resource_list_destroy_entry(entry);
+		return status;
+	}
+
+	resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
+		dev_printk(KERN_DEBUG, &device->dev,
+			   "host bridge window %pR (ignored)\n", entry->res);
+		resource_list_destroy_entry(entry);
+	}
+	x86_pci_root_bus_resources(busnum, &ci->resources);
+
+	return 0;
+}
+
+static struct acpi_pci_root_ops acpi_pci_root_ops = {
+	.pci_ops = &pci_root_ops,
+	.init_info = pci_acpi_root_init_info,
+	.release_info = pci_acpi_root_release_info,
+	.prepare_resources = pci_acpi_root_prepare_resources,
+};
+
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
+{
+	int domain = root->segment;
+	int busnum = root->secondary.start;
+	int node = pci_acpi_root_get_node(root);
+	struct pci_bus *bus;
+
+	if (pci_ignore_seg)
+		root->segment = domain = 0;
+
+	if (domain && !pci_domains_supported) {
+		printk(KERN_WARNING "pci_bus %04x:%02x: "
+		       "ignored (multiple domains not supported)\n",
+		       domain, busnum);
+		return NULL;
+	}
+
+	bus = pci_find_bus(domain, busnum);
+	if (bus) {
+		/*
+		 * If the desired bus has been scanned already, replace
+		 * its bus->sysdata.
+		 */
+		struct pci_sysdata sd = {
+			.domain = domain,
+			.node = node,
+			.companion = root->device
+		};
+
+		memcpy(bus->sysdata, &sd, sizeof(sd));
+	} else {
+		struct pci_root_info *info;
+
+		info = kzalloc(sizeof(*info), GFP_KERNEL);
+		if (!info)
+			dev_err(&root->device->dev,
+				"pci_bus %04x:%02x: ignored (out of memory)\n",
+				domain, busnum);
+		else {
+			info->sd.domain = domain;
+			info->sd.node = node;
+			info->sd.companion = root->device;
+			bus = acpi_pci_root_create(root, &acpi_pci_root_ops,
+						   &info->common, &info->sd);
+		}
+	}
+
+	/* After the PCI-E bus has been walked and all devices discovered,
+	 * configure any settings of the fabric that might be necessary.
+	 */
+	if (bus) {
+		struct pci_bus *child;
+		list_for_each_entry(child, &bus->children, node)
+			pcie_bus_configure_settings(child);
+	}
+
+	return bus;
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	/*
+	 * We pass NULL as parent to pci_create_root_bus(), so if it is not NULL
+	 * here, pci_create_root_bus() has been called by someone else and
+	 * sysdata is likely to be different from what we expect.  Let it go in
+	 * that case.
+	 */
+	if (!bridge->dev.parent) {
+		struct pci_sysdata *sd = bridge->bus->sysdata;
+		ACPI_COMPANION_SET(&bridge->dev, sd->companion);
+	}
+	return 0;
+}
+
+int __init pci_acpi_init(void)
+{
+	struct pci_dev *dev = NULL;
+
+	if (acpi_noirq)
+		return -ENODEV;
+
+	printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
+	acpi_irq_penalty_init();
+	pcibios_enable_irq = acpi_pci_irq_enable;
+	pcibios_disable_irq = acpi_pci_irq_disable;
+	x86_init.pci.init_irq = x86_init_noop;
+
+	if (pci_routeirq) {
+		/*
+		 * PCI IRQ routing is set up by pci_enable_device(), but we
+		 * also do it here in case there are still broken drivers that
+		 * don't use pci_enable_device().
+		 */
+		printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
+		for_each_pci_dev(dev)
+			acpi_pci_irq_enable(dev);
+	}
+
+	return 0;
+}