Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 228 insertions, 0 deletions

diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c
new file mode 100644
index 000000000..4ce5eb35d
--- /dev/null
+++ b/drivers/cpufreq/elanfreq.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *	elanfreq:	cpufreq driver for the AMD ELAN family
+ *
+ *	(c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ *	Parts of this code are (c) Sven Geggus <sven@geggus.net>
+ *
+ *      All Rights Reserved.
+ *
+ *	2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/msr.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+
+#define REG_CSCIR 0x22		/* Chip Setup and Control Index Register    */
+#define REG_CSCDR 0x23		/* Chip Setup and Control Data  Register    */
+
+/* Module parameter */
+static int max_freq;
+
+struct s_elan_multiplier {
+	int clock;		/* frequency in kHz                         */
+	int val40h;		/* PMU Force Mode register                  */
+	int val80h;		/* CPU Clock Speed Register                 */
+};
+
+/*
+ * It is important that the frequencies
+ * are listed in ascending order here!
+ */
+static struct s_elan_multiplier elan_multiplier[] = {
+	{1000,	0x02,	0x18},
+	{2000,	0x02,	0x10},
+	{4000,	0x02,	0x08},
+	{8000,	0x00,	0x00},
+	{16000,	0x00,	0x02},
+	{33000,	0x00,	0x04},
+	{66000,	0x01,	0x04},
+	{99000,	0x01,	0x05}
+};
+
+static struct cpufreq_frequency_table elanfreq_table[] = {
+	{0, 0,	1000},
+	{0, 1,	2000},
+	{0, 2,	4000},
+	{0, 3,	8000},
+	{0, 4,	16000},
+	{0, 5,	33000},
+	{0, 6,	66000},
+	{0, 7,	99000},
+	{0, 0,	CPUFREQ_TABLE_END},
+};
+
+
+/**
+ *	elanfreq_get_cpu_frequency: determine current cpu speed
+ *
+ *	Finds out at which frequency the CPU of the Elan SOC runs
+ *	at the moment. Frequencies from 1 to 33 MHz are generated
+ *	the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
+ *	and have the rest of the chip running with 33 MHz.
+ */
+
+static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
+{
+	u8 clockspeed_reg;    /* Clock Speed Register */
+
+	local_irq_disable();
+	outb_p(0x80, REG_CSCIR);
+	clockspeed_reg = inb_p(REG_CSCDR);
+	local_irq_enable();
+
+	if ((clockspeed_reg & 0xE0) == 0xE0)
+		return 0;
+
+	/* Are we in CPU clock multiplied mode (66/99 MHz)? */
+	if ((clockspeed_reg & 0xE0) == 0xC0) {
+		if ((clockspeed_reg & 0x01) == 0)
+			return 66000;
+		else
+			return 99000;
+	}
+
+	/* 33 MHz is not 32 MHz... */
+	if ((clockspeed_reg & 0xE0) == 0xA0)
+		return 33000;
+
+	return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
+}
+
+
+static int elanfreq_target(struct cpufreq_policy *policy,
+			    unsigned int state)
+{
+	/*
+	 * Access to the Elan's internal registers is indexed via
+	 * 0x22: Chip Setup & Control Register Index Register (CSCI)
+	 * 0x23: Chip Setup & Control Register Data  Register (CSCD)
+	 *
+	 */
+
+	/*
+	 * 0x40 is the Power Management Unit's Force Mode Register.
+	 * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
+	 */
+
+	local_irq_disable();
+	outb_p(0x40, REG_CSCIR);		/* Disable hyperspeed mode */
+	outb_p(0x00, REG_CSCDR);
+	local_irq_enable();		/* wait till internal pipelines and */
+	udelay(1000);			/* buffers have cleaned up          */
+
+	local_irq_disable();
+
+	/* now, set the CPU clock speed register (0x80) */
+	outb_p(0x80, REG_CSCIR);
+	outb_p(elan_multiplier[state].val80h, REG_CSCDR);
+
+	/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
+	outb_p(0x40, REG_CSCIR);
+	outb_p(elan_multiplier[state].val40h, REG_CSCDR);
+	udelay(10000);
+	local_irq_enable();
+
+	return 0;
+}
+/*
+ *	Module init and exit code
+ */
+
+static int elanfreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	struct cpufreq_frequency_table *pos;
+
+	/* capability check */
+	if ((c->x86_vendor != X86_VENDOR_AMD) ||
+	    (c->x86 != 4) || (c->x86_model != 10))
+		return -ENODEV;
+
+	/* max freq */
+	if (!max_freq)
+		max_freq = elanfreq_get_cpu_frequency(0);
+
+	/* table init */
+	cpufreq_for_each_entry(pos, elanfreq_table)
+		if (pos->frequency > max_freq)
+			pos->frequency = CPUFREQ_ENTRY_INVALID;
+
+	policy->freq_table = elanfreq_table;
+	return 0;
+}
+
+
+#ifndef MODULE
+/**
+ * elanfreq_setup - elanfreq command line parameter parsing
+ *
+ * elanfreq command line parameter.  Use:
+ *  elanfreq=66000
+ * to set the maximum CPU frequency to 66 MHz. Note that in
+ * case you do not give this boot parameter, the maximum
+ * frequency will fall back to _current_ CPU frequency which
+ * might be lower. If you build this as a module, use the
+ * max_freq module parameter instead.
+ */
+static int __init elanfreq_setup(char *str)
+{
+	max_freq = simple_strtoul(str, &str, 0);
+	pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
+	return 1;
+}
+__setup("elanfreq=", elanfreq_setup);
+#endif
+
+
+static struct cpufreq_driver elanfreq_driver = {
+	.get		= elanfreq_get_cpu_frequency,
+	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= elanfreq_target,
+	.init		= elanfreq_cpu_init,
+	.name		= "elanfreq",
+	.attr		= cpufreq_generic_attr,
+};
+
+static const struct x86_cpu_id elan_id[] = {
+	X86_MATCH_VENDOR_FAM_MODEL(AMD, 4, 10, NULL),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, elan_id);
+
+static int __init elanfreq_init(void)
+{
+	if (!x86_match_cpu(elan_id))
+		return -ENODEV;
+	return cpufreq_register_driver(&elanfreq_driver);
+}
+
+
+static void __exit elanfreq_exit(void)
+{
+	cpufreq_unregister_driver(&elanfreq_driver);
+}
+
+
+module_param(max_freq, int, 0444);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
+		"Sven Geggus <sven@geggus.net>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
+
+module_init(elanfreq_init);
+module_exit(elanfreq_exit);