Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 591 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c
new file mode 100644
index 000000000..2a07fd967
--- /dev/null
+++ b/drivers/gpio/gpio-pcie-idio-24.c
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for the ACCES PCIe-IDIO-24 family
+ * Copyright (C) 2018 William Breathitt Gray
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * This driver supports the following ACCES devices: PCIe-IDIO-24,
+ * PCIe-IDI-24, PCIe-IDO-24, and PCIe-IDIO-12.
+ */
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/irqdesc.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+/*
+ * PLX PEX8311 PCI LCS_INTCSR Interrupt Control/Status
+ *
+ * Bit: Description
+ *   0: Enable Interrupt Sources (Bit 0)
+ *   1: Enable Interrupt Sources (Bit 1)
+ *   2: Generate Internal PCI Bus Internal SERR# Interrupt
+ *   3: Mailbox Interrupt Enable
+ *   4: Power Management Interrupt Enable
+ *   5: Power Management Interrupt
+ *   6: Slave Read Local Data Parity Check Error Enable
+ *   7: Slave Read Local Data Parity Check Error Status
+ *   8: Internal PCI Wire Interrupt Enable
+ *   9: PCI Express Doorbell Interrupt Enable
+ *  10: PCI Abort Interrupt Enable
+ *  11: Local Interrupt Input Enable
+ *  12: Retry Abort Enable
+ *  13: PCI Express Doorbell Interrupt Active
+ *  14: PCI Abort Interrupt Active
+ *  15: Local Interrupt Input Active
+ *  16: Local Interrupt Output Enable
+ *  17: Local Doorbell Interrupt Enable
+ *  18: DMA Channel 0 Interrupt Enable
+ *  19: DMA Channel 1 Interrupt Enable
+ *  20: Local Doorbell Interrupt Active
+ *  21: DMA Channel 0 Interrupt Active
+ *  22: DMA Channel 1 Interrupt Active
+ *  23: Built-In Self-Test (BIST) Interrupt Active
+ *  24: Direct Master was the Bus Master during a Master or Target Abort
+ *  25: DMA Channel 0 was the Bus Master during a Master or Target Abort
+ *  26: DMA Channel 1 was the Bus Master during a Master or Target Abort
+ *  27: Target Abort after internal 256 consecutive Master Retrys
+ *  28: PCI Bus wrote data to LCS_MBOX0
+ *  29: PCI Bus wrote data to LCS_MBOX1
+ *  30: PCI Bus wrote data to LCS_MBOX2
+ *  31: PCI Bus wrote data to LCS_MBOX3
+ */
+#define PLX_PEX8311_PCI_LCS_INTCSR  0x68
+#define INTCSR_INTERNAL_PCI_WIRE    BIT(8)
+#define INTCSR_LOCAL_INPUT          BIT(11)
+
+/**
+ * struct idio_24_gpio_reg - GPIO device registers structure
+ * @out0_7:	Read: FET Outputs 0-7
+ *		Write: FET Outputs 0-7
+ * @out8_15:	Read: FET Outputs 8-15
+ *		Write: FET Outputs 8-15
+ * @out16_23:	Read: FET Outputs 16-23
+ *		Write: FET Outputs 16-23
+ * @ttl_out0_7:	Read: TTL/CMOS Outputs 0-7
+ *		Write: TTL/CMOS Outputs 0-7
+ * @in0_7:	Read: Isolated Inputs 0-7
+ *		Write: Reserved
+ * @in8_15:	Read: Isolated Inputs 8-15
+ *		Write: Reserved
+ * @in16_23:	Read: Isolated Inputs 16-23
+ *		Write: Reserved
+ * @ttl_in0_7:	Read: TTL/CMOS Inputs 0-7
+ *		Write: Reserved
+ * @cos0_7:	Read: COS Status Inputs 0-7
+ *		Write: COS Clear Inputs 0-7
+ * @cos8_15:	Read: COS Status Inputs 8-15
+ *		Write: COS Clear Inputs 8-15
+ * @cos16_23:	Read: COS Status Inputs 16-23
+ *		Write: COS Clear Inputs 16-23
+ * @cos_ttl0_7:	Read: COS Status TTL/CMOS 0-7
+ *		Write: COS Clear TTL/CMOS 0-7
+ * @ctl:	Read: Control Register
+ *		Write: Control Register
+ * @reserved:	Read: Reserved
+ *		Write: Reserved
+ * @cos_enable:	Read: COS Enable
+ *		Write: COS Enable
+ * @soft_reset:	Read: IRQ Output Pin Status
+ *		Write: Software Board Reset
+ */
+struct idio_24_gpio_reg {
+	u8 out0_7;
+	u8 out8_15;
+	u8 out16_23;
+	u8 ttl_out0_7;
+	u8 in0_7;
+	u8 in8_15;
+	u8 in16_23;
+	u8 ttl_in0_7;
+	u8 cos0_7;
+	u8 cos8_15;
+	u8 cos16_23;
+	u8 cos_ttl0_7;
+	u8 ctl;
+	u8 reserved;
+	u8 cos_enable;
+	u8 soft_reset;
+};
+
+/**
+ * struct idio_24_gpio - GPIO device private data structure
+ * @chip:	instance of the gpio_chip
+ * @lock:	synchronization lock to prevent I/O race conditions
+ * @reg:	I/O address offset for the GPIO device registers
+ * @irq_mask:	I/O bits affected by interrupts
+ */
+struct idio_24_gpio {
+	struct gpio_chip chip;
+	raw_spinlock_t lock;
+	__u8 __iomem *plx;
+	struct idio_24_gpio_reg __iomem *reg;
+	unsigned long irq_mask;
+};
+
+static int idio_24_gpio_get_direction(struct gpio_chip *chip,
+	unsigned int offset)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* FET Outputs */
+	if (offset < 24)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	/* Isolated Inputs */
+	if (offset < 48)
+		return GPIO_LINE_DIRECTION_IN;
+
+	/* TTL/CMOS I/O */
+	/* OUT MODE = 1 when TTL/CMOS Output Mode is set */
+	if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int idio_24_gpio_direction_input(struct gpio_chip *chip,
+	unsigned int offset)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	unsigned int ctl_state;
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* TTL/CMOS I/O */
+	if (offset > 47) {
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+		/* Clear TTL/CMOS Output Mode */
+		ctl_state = ioread8(&idio24gpio->reg->ctl) & ~out_mode_mask;
+		iowrite8(ctl_state, &idio24gpio->reg->ctl);
+
+		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+	}
+
+	return 0;
+}
+
+static int idio_24_gpio_direction_output(struct gpio_chip *chip,
+	unsigned int offset, int value)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	unsigned int ctl_state;
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* TTL/CMOS I/O */
+	if (offset > 47) {
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+		/* Set TTL/CMOS Output Mode */
+		ctl_state = ioread8(&idio24gpio->reg->ctl) | out_mode_mask;
+		iowrite8(ctl_state, &idio24gpio->reg->ctl);
+
+		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+	}
+
+	chip->set(chip, offset, value);
+	return 0;
+}
+
+static int idio_24_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	const unsigned long offset_mask = BIT(offset % 8);
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* FET Outputs */
+	if (offset < 8)
+		return !!(ioread8(&idio24gpio->reg->out0_7) & offset_mask);
+
+	if (offset < 16)
+		return !!(ioread8(&idio24gpio->reg->out8_15) & offset_mask);
+
+	if (offset < 24)
+		return !!(ioread8(&idio24gpio->reg->out16_23) & offset_mask);
+
+	/* Isolated Inputs */
+	if (offset < 32)
+		return !!(ioread8(&idio24gpio->reg->in0_7) & offset_mask);
+
+	if (offset < 40)
+		return !!(ioread8(&idio24gpio->reg->in8_15) & offset_mask);
+
+	if (offset < 48)
+		return !!(ioread8(&idio24gpio->reg->in16_23) & offset_mask);
+
+	/* TTL/CMOS Outputs */
+	if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
+		return !!(ioread8(&idio24gpio->reg->ttl_out0_7) & offset_mask);
+
+	/* TTL/CMOS Inputs */
+	return !!(ioread8(&idio24gpio->reg->ttl_in0_7) & offset_mask);
+}
+
+static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	void __iomem *ports[] = {
+		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
+		&idio24gpio->reg->out16_23, &idio24gpio->reg->in0_7,
+		&idio24gpio->reg->in8_15, &idio24gpio->reg->in16_23,
+	};
+	size_t index;
+	unsigned long port_state;
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
+
+		/* read bits from current gpio port (port 6 is TTL GPIO) */
+		if (index < 6)
+			port_state = ioread8(ports[index]);
+		else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
+			port_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+		else
+			port_state = ioread8(&idio24gpio->reg->ttl_in0_7);
+
+		port_state &= gpio_mask;
+
+		bitmap_set_value8(bits, port_state, offset);
+	}
+
+	return 0;
+}
+
+static void idio_24_gpio_set(struct gpio_chip *chip, unsigned int offset,
+	int value)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	const unsigned long out_mode_mask = BIT(1);
+	void __iomem *base;
+	const unsigned int mask = BIT(offset % 8);
+	unsigned long flags;
+	unsigned int out_state;
+
+	/* Isolated Inputs */
+	if (offset > 23 && offset < 48)
+		return;
+
+	/* TTL/CMOS Inputs */
+	if (offset > 47 && !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask))
+		return;
+
+	/* TTL/CMOS Outputs */
+	if (offset > 47)
+		base = &idio24gpio->reg->ttl_out0_7;
+	/* FET Outputs */
+	else if (offset > 15)
+		base = &idio24gpio->reg->out16_23;
+	else if (offset > 7)
+		base = &idio24gpio->reg->out8_15;
+	else
+		base = &idio24gpio->reg->out0_7;
+
+	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+	if (value)
+		out_state = ioread8(base) | mask;
+	else
+		out_state = ioread8(base) & ~mask;
+
+	iowrite8(out_state, base);
+
+	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+}
+
+static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	void __iomem *ports[] = {
+		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
+		&idio24gpio->reg->out16_23
+	};
+	size_t index;
+	unsigned long bitmask;
+	unsigned long flags;
+	unsigned long out_state;
+	const unsigned long out_mode_mask = BIT(1);
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
+
+		bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
+
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+		/* read bits from current gpio port (port 6 is TTL GPIO) */
+		if (index < 6) {
+			out_state = ioread8(ports[index]);
+		} else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask) {
+			out_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+		} else {
+			/* skip TTL GPIO if set for input */
+			raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+			continue;
+		}
+
+		/* set requested bit states */
+		out_state &= ~gpio_mask;
+		out_state |= bitmask;
+
+		/* write bits for current gpio port (port 6 is TTL GPIO) */
+		if (index < 6)
+			iowrite8(out_state, ports[index]);
+		else
+			iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
+
+		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+	}
+}
+
+static void idio_24_irq_ack(struct irq_data *data)
+{
+}
+
+static void idio_24_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *const chip = irq_data_get_irq_chip_data(data);
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	const unsigned long bit_offset = irqd_to_hwirq(data) - 24;
+	unsigned char new_irq_mask;
+	const unsigned long bank_offset = bit_offset / 8;
+	unsigned char cos_enable_state;
+
+	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+	idio24gpio->irq_mask &= ~BIT(bit_offset);
+	new_irq_mask = idio24gpio->irq_mask >> bank_offset * 8;
+
+	if (!new_irq_mask) {
+		cos_enable_state = ioread8(&idio24gpio->reg->cos_enable);
+
+		/* Disable Rising Edge detection */
+		cos_enable_state &= ~BIT(bank_offset);
+		/* Disable Falling Edge detection */
+		cos_enable_state &= ~BIT(bank_offset + 4);
+
+		iowrite8(cos_enable_state, &idio24gpio->reg->cos_enable);
+	}
+
+	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+}
+
+static void idio_24_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *const chip = irq_data_get_irq_chip_data(data);
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	unsigned char prev_irq_mask;
+	const unsigned long bit_offset = irqd_to_hwirq(data) - 24;
+	const unsigned long bank_offset = bit_offset / 8;
+	unsigned char cos_enable_state;
+
+	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+	prev_irq_mask = idio24gpio->irq_mask >> bank_offset * 8;
+	idio24gpio->irq_mask |= BIT(bit_offset);
+
+	if (!prev_irq_mask) {
+		cos_enable_state = ioread8(&idio24gpio->reg->cos_enable);
+
+		/* Enable Rising Edge detection */
+		cos_enable_state |= BIT(bank_offset);
+		/* Enable Falling Edge detection */
+		cos_enable_state |= BIT(bank_offset + 4);
+
+		iowrite8(cos_enable_state, &idio24gpio->reg->cos_enable);
+	}
+
+	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+}
+
+static int idio_24_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+	/* The only valid irq types are none and both-edges */
+	if (flow_type != IRQ_TYPE_NONE &&
+		(flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH)
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct irq_chip idio_24_irqchip = {
+	.name = "pcie-idio-24",
+	.irq_ack = idio_24_irq_ack,
+	.irq_mask = idio_24_irq_mask,
+	.irq_unmask = idio_24_irq_unmask,
+	.irq_set_type = idio_24_irq_set_type
+};
+
+static irqreturn_t idio_24_irq_handler(int irq, void *dev_id)
+{
+	struct idio_24_gpio *const idio24gpio = dev_id;
+	unsigned long irq_status;
+	struct gpio_chip *const chip = &idio24gpio->chip;
+	unsigned long irq_mask;
+	int gpio;
+
+	raw_spin_lock(&idio24gpio->lock);
+
+	/* Read Change-Of-State status */
+	irq_status = ioread32(&idio24gpio->reg->cos0_7);
+
+	raw_spin_unlock(&idio24gpio->lock);
+
+	/* Make sure our device generated IRQ */
+	if (!irq_status)
+		return IRQ_NONE;
+
+	/* Handle only unmasked IRQ */
+	irq_mask = idio24gpio->irq_mask & irq_status;
+
+	for_each_set_bit(gpio, &irq_mask, chip->ngpio - 24)
+		generic_handle_irq(irq_find_mapping(chip->irq.domain,
+			gpio + 24));
+
+	raw_spin_lock(&idio24gpio->lock);
+
+	/* Clear Change-Of-State status */
+	iowrite32(irq_status, &idio24gpio->reg->cos0_7);
+
+	raw_spin_unlock(&idio24gpio->lock);
+
+	return IRQ_HANDLED;
+}
+
+#define IDIO_24_NGPIO 56
+static const char *idio_24_names[IDIO_24_NGPIO] = {
+	"OUT0", "OUT1", "OUT2", "OUT3", "OUT4", "OUT5", "OUT6", "OUT7",
+	"OUT8", "OUT9", "OUT10", "OUT11", "OUT12", "OUT13", "OUT14", "OUT15",
+	"OUT16", "OUT17", "OUT18", "OUT19", "OUT20", "OUT21", "OUT22", "OUT23",
+	"IIN0", "IIN1", "IIN2", "IIN3", "IIN4", "IIN5", "IIN6", "IIN7",
+	"IIN8", "IIN9", "IIN10", "IIN11", "IIN12", "IIN13", "IIN14", "IIN15",
+	"IIN16", "IIN17", "IIN18", "IIN19", "IIN20", "IIN21", "IIN22", "IIN23",
+	"TTL0", "TTL1", "TTL2", "TTL3", "TTL4", "TTL5", "TTL6", "TTL7"
+};
+
+static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct device *const dev = &pdev->dev;
+	struct idio_24_gpio *idio24gpio;
+	int err;
+	const size_t pci_plx_bar_index = 1;
+	const size_t pci_bar_index = 2;
+	const char *const name = pci_name(pdev);
+	struct gpio_irq_chip *girq;
+
+	idio24gpio = devm_kzalloc(dev, sizeof(*idio24gpio), GFP_KERNEL);
+	if (!idio24gpio)
+		return -ENOMEM;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(dev, "Failed to enable PCI device (%d)\n", err);
+		return err;
+	}
+
+	err = pcim_iomap_regions(pdev, BIT(pci_plx_bar_index) | BIT(pci_bar_index), name);
+	if (err) {
+		dev_err(dev, "Unable to map PCI I/O addresses (%d)\n", err);
+		return err;
+	}
+
+	idio24gpio->plx = pcim_iomap_table(pdev)[pci_plx_bar_index];
+	idio24gpio->reg = pcim_iomap_table(pdev)[pci_bar_index];
+
+	idio24gpio->chip.label = name;
+	idio24gpio->chip.parent = dev;
+	idio24gpio->chip.owner = THIS_MODULE;
+	idio24gpio->chip.base = -1;
+	idio24gpio->chip.ngpio = IDIO_24_NGPIO;
+	idio24gpio->chip.names = idio_24_names;
+	idio24gpio->chip.get_direction = idio_24_gpio_get_direction;
+	idio24gpio->chip.direction_input = idio_24_gpio_direction_input;
+	idio24gpio->chip.direction_output = idio_24_gpio_direction_output;
+	idio24gpio->chip.get = idio_24_gpio_get;
+	idio24gpio->chip.get_multiple = idio_24_gpio_get_multiple;
+	idio24gpio->chip.set = idio_24_gpio_set;
+	idio24gpio->chip.set_multiple = idio_24_gpio_set_multiple;
+
+	girq = &idio24gpio->chip.irq;
+	girq->chip = &idio_24_irqchip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+
+	raw_spin_lock_init(&idio24gpio->lock);
+
+	/* Software board reset */
+	iowrite8(0, &idio24gpio->reg->soft_reset);
+	/*
+	 * enable PLX PEX8311 internal PCI wire interrupt and local interrupt
+	 * input
+	 */
+	iowrite8((INTCSR_INTERNAL_PCI_WIRE | INTCSR_LOCAL_INPUT) >> 8,
+		 idio24gpio->plx + PLX_PEX8311_PCI_LCS_INTCSR + 1);
+
+	err = devm_gpiochip_add_data(dev, &idio24gpio->chip, idio24gpio);
+	if (err) {
+		dev_err(dev, "GPIO registering failed (%d)\n", err);
+		return err;
+	}
+
+	err = devm_request_irq(dev, pdev->irq, idio_24_irq_handler, IRQF_SHARED,
+		name, idio24gpio);
+	if (err) {
+		dev_err(dev, "IRQ handler registering failed (%d)\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct pci_device_id idio_24_pci_dev_id[] = {
+	{ PCI_DEVICE(0x494F, 0x0FD0) }, { PCI_DEVICE(0x494F, 0x0BD0) },
+	{ PCI_DEVICE(0x494F, 0x07D0) }, { PCI_DEVICE(0x494F, 0x0FC0) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, idio_24_pci_dev_id);
+
+static struct pci_driver idio_24_driver = {
+	.name = "pcie-idio-24",
+	.id_table = idio_24_pci_dev_id,
+	.probe = idio_24_probe
+};
+
+module_pci_driver(idio_24_driver);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("ACCES PCIe-IDIO-24 GPIO driver");
+MODULE_LICENSE("GPL v2");