Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

12 files changed, 6974 insertions, 0 deletions

diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
new file mode 100644
index 000000000..e1fa7d820
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/Kconfig
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config DRM_ANALOGIX_ANX6345
+	tristate "Analogix ANX6345 bridge"
+	depends on OF
+	select DRM_ANALOGIX_DP
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  ANX6345 is an ultra-low Full-HD DisplayPort/eDP
+	  transmitter designed for portable devices. The
+	  ANX6345 transforms the LVTTL RGB output of an
+	  application processor to eDP or DisplayPort.
+
+config DRM_ANALOGIX_ANX78XX
+	tristate "Analogix ANX78XX bridge"
+	select DRM_ANALOGIX_DP
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  ANX78XX is an ultra-low power Full-HD SlimPort transmitter
+	  designed for portable devices. The ANX78XX transforms
+	  the HDMI output of an application processor to MyDP
+	  or DisplayPort.
+
+config DRM_ANALOGIX_DP
+	tristate
+	depends on DRM
diff --git a/drivers/gpu/drm/bridge/analogix/Makefile b/drivers/gpu/drm/bridge/analogix/Makefile
new file mode 100644
index 000000000..97669b374
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o analogix-i2c-dptx.o
+obj-$(CONFIG_DRM_ANALOGIX_ANX6345) += analogix-anx6345.o
+obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
+obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
new file mode 100644
index 000000000..d9164fab0
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
@@ -0,0 +1,818 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ * Copyright(c) 2017, Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include "analogix-i2c-dptx.h"
+#include "analogix-i2c-txcommon.h"
+
+#define POLL_DELAY		50000 /* us */
+#define POLL_TIMEOUT		5000000 /* us */
+
+#define I2C_IDX_DPTX		0
+#define I2C_IDX_TXCOM		1
+
+static const u8 anx6345_i2c_addresses[] = {
+	[I2C_IDX_DPTX]	= 0x70,
+	[I2C_IDX_TXCOM]	= 0x72,
+};
+#define I2C_NUM_ADDRESSES	ARRAY_SIZE(anx6345_i2c_addresses)
+
+struct anx6345 {
+	struct drm_dp_aux aux;
+	struct drm_bridge bridge;
+	struct i2c_client *client;
+	struct edid *edid;
+	struct drm_connector connector;
+	struct drm_panel *panel;
+	struct regulator *dvdd12;
+	struct regulator *dvdd25;
+	struct gpio_desc *gpiod_reset;
+	struct mutex lock;	/* protect EDID access */
+
+	/* I2C Slave addresses of ANX6345 are mapped as DPTX and SYS */
+	struct i2c_client *i2c_clients[I2C_NUM_ADDRESSES];
+	struct regmap *map[I2C_NUM_ADDRESSES];
+
+	u16 chipid;
+	u8 dpcd[DP_RECEIVER_CAP_SIZE];
+
+	bool powered;
+};
+
+static inline struct anx6345 *connector_to_anx6345(struct drm_connector *c)
+{
+	return container_of(c, struct anx6345, connector);
+}
+
+static inline struct anx6345 *bridge_to_anx6345(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct anx6345, bridge);
+}
+
+static int anx6345_set_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, mask);
+}
+
+static int anx6345_clear_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, 0);
+}
+
+static ssize_t anx6345_aux_transfer(struct drm_dp_aux *aux,
+				    struct drm_dp_aux_msg *msg)
+{
+	struct anx6345 *anx6345 = container_of(aux, struct anx6345, aux);
+
+	return anx_dp_aux_transfer(anx6345->map[I2C_IDX_DPTX], msg);
+}
+
+static int anx6345_dp_link_training(struct anx6345 *anx6345)
+{
+	unsigned int value;
+	u8 dp_bw, dpcd[2];
+	int err;
+
+	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+				 SP_POWERDOWN_CTRL_REG,
+				 SP_TOTAL_PD);
+	if (err)
+		return err;
+
+	err = drm_dp_dpcd_readb(&anx6345->aux, DP_MAX_LINK_RATE, &dp_bw);
+	if (err < 0)
+		return err;
+
+	switch (dp_bw) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+		break;
+
+	default:
+		DRM_DEBUG_KMS("DP bandwidth (%#02x) not supported\n", dp_bw);
+		return -EINVAL;
+	}
+
+	err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
+			       SP_VIDEO_MUTE);
+	if (err)
+		return err;
+
+	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+				 SP_VID_CTRL1_REG, SP_VIDEO_EN);
+	if (err)
+		return err;
+
+	/* Get DPCD info */
+	err = drm_dp_dpcd_read(&anx6345->aux, DP_DPCD_REV,
+			       &anx6345->dpcd, DP_RECEIVER_CAP_SIZE);
+	if (err < 0) {
+		DRM_ERROR("Failed to read DPCD: %d\n", err);
+		return err;
+	}
+
+	/* Clear channel x SERDES power down */
+	err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX],
+				 SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+	if (err)
+		return err;
+
+	/*
+	 * Power up the sink (DP_SET_POWER register is only available on DPCD
+	 * v1.1 and later).
+	 */
+	if (anx6345->dpcd[DP_DPCD_REV] >= 0x11) {
+		err = drm_dp_dpcd_readb(&anx6345->aux, DP_SET_POWER, &dpcd[0]);
+		if (err < 0) {
+			DRM_ERROR("Failed to read DP_SET_POWER register: %d\n",
+				  err);
+			return err;
+		}
+
+		dpcd[0] &= ~DP_SET_POWER_MASK;
+		dpcd[0] |= DP_SET_POWER_D0;
+
+		err = drm_dp_dpcd_writeb(&anx6345->aux, DP_SET_POWER, dpcd[0]);
+		if (err < 0) {
+			DRM_ERROR("Failed to power up DisplayPort link: %d\n",
+				  err);
+			return err;
+		}
+
+		/*
+		 * According to the DP 1.1 specification, a "Sink Device must
+		 * exit the power saving state within 1 ms" (Section 2.5.3.1,
+		 * Table 5-52, "Sink Control Field" (register 0x600).
+		 */
+		usleep_range(1000, 2000);
+	}
+
+	/* Possibly enable downspread on the sink */
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+			   SP_DP_DOWNSPREAD_CTRL1_REG, 0);
+	if (err)
+		return err;
+
+	if (anx6345->dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) {
+		DRM_DEBUG("Enable downspread on the sink\n");
+		/* 4000PPM */
+		err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+				   SP_DP_DOWNSPREAD_CTRL1_REG, 8);
+		if (err)
+			return err;
+
+		err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL,
+					 DP_SPREAD_AMP_0_5);
+		if (err < 0)
+			return err;
+	} else {
+		err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL, 0);
+		if (err < 0)
+			return err;
+	}
+
+	/* Set the lane count and the link rate on the sink */
+	if (drm_dp_enhanced_frame_cap(anx6345->dpcd))
+		err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
+				       SP_DP_SYSTEM_CTRL_BASE + 4,
+				       SP_ENHANCED_MODE);
+	else
+		err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX],
+					 SP_DP_SYSTEM_CTRL_BASE + 4,
+					 SP_ENHANCED_MODE);
+	if (err)
+		return err;
+
+	dpcd[0] = dp_bw;
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+			   SP_DP_MAIN_LINK_BW_SET_REG, dpcd[0]);
+	if (err)
+		return err;
+
+	dpcd[1] = drm_dp_max_lane_count(anx6345->dpcd);
+
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+			   SP_DP_LANE_COUNT_SET_REG, dpcd[1]);
+	if (err)
+		return err;
+
+	if (drm_dp_enhanced_frame_cap(anx6345->dpcd))
+		dpcd[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+
+	err = drm_dp_dpcd_write(&anx6345->aux, DP_LINK_BW_SET, dpcd,
+				sizeof(dpcd));
+
+	if (err < 0) {
+		DRM_ERROR("Failed to configure link: %d\n", err);
+		return err;
+	}
+
+	/* Start training on the source */
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_LT_CTRL_REG,
+			   SP_LT_EN);
+	if (err)
+		return err;
+
+	return regmap_read_poll_timeout(anx6345->map[I2C_IDX_DPTX],
+				       SP_DP_LT_CTRL_REG,
+				       value, !(value & SP_DP_LT_INPROGRESS),
+				       POLL_DELAY, POLL_TIMEOUT);
+}
+
+static int anx6345_tx_initialization(struct anx6345 *anx6345)
+{
+	int err, i;
+
+	/* FIXME: colordepth is hardcoded for now */
+	err = regmap_write(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL2_REG,
+			   SP_IN_BPC_6BIT << SP_IN_BPC_SHIFT);
+	if (err)
+		return err;
+
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_PLL_CTRL_REG, 0);
+	if (err)
+		return err;
+
+	err = regmap_write(anx6345->map[I2C_IDX_TXCOM],
+			   SP_ANALOG_DEBUG1_REG, 0);
+	if (err)
+		return err;
+
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+			   SP_DP_LINK_DEBUG_CTRL_REG,
+			   SP_NEW_PRBS7 | SP_M_VID_DEBUG);
+	if (err)
+		return err;
+
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+			   SP_DP_ANALOG_POWER_DOWN_REG, 0);
+	if (err)
+		return err;
+
+	/* Force HPD */
+	err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
+			       SP_DP_SYSTEM_CTRL_BASE + 3,
+			       SP_HPD_FORCE | SP_HPD_CTRL);
+	if (err)
+		return err;
+
+	for (i = 0; i < 4; i++) {
+		/* 4 lanes */
+		err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+				   SP_DP_LANE0_LT_CTRL_REG + i, 0);
+		if (err)
+			return err;
+	}
+
+	/* Reset AUX */
+	err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM],
+			       SP_RESET_CTRL2_REG, SP_AUX_RST);
+	if (err)
+		return err;
+
+	return anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+				 SP_RESET_CTRL2_REG, SP_AUX_RST);
+}
+
+static void anx6345_poweron(struct anx6345 *anx6345)
+{
+	int err;
+
+	/* Ensure reset is asserted before starting power on sequence */
+	gpiod_set_value_cansleep(anx6345->gpiod_reset, 1);
+	usleep_range(1000, 2000);
+
+	err = regulator_enable(anx6345->dvdd12);
+	if (err) {
+		DRM_ERROR("Failed to enable dvdd12 regulator: %d\n",
+			  err);
+		return;
+	}
+
+	/* T1 - delay between VDD12 and VDD25 should be 0-2ms */
+	usleep_range(1000, 2000);
+
+	err = regulator_enable(anx6345->dvdd25);
+	if (err) {
+		DRM_ERROR("Failed to enable dvdd25 regulator: %d\n",
+			  err);
+		return;
+	}
+
+	/* T2 - delay between RESETN and all power rail stable,
+	 * should be 2-5ms
+	 */
+	usleep_range(2000, 5000);
+
+	gpiod_set_value_cansleep(anx6345->gpiod_reset, 0);
+
+	/* Power on registers module */
+	anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
+			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+	anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
+			   SP_REGISTER_PD | SP_TOTAL_PD);
+
+	if (anx6345->panel)
+		drm_panel_prepare(anx6345->panel);
+
+	anx6345->powered = true;
+}
+
+static void anx6345_poweroff(struct anx6345 *anx6345)
+{
+	int err;
+
+	gpiod_set_value_cansleep(anx6345->gpiod_reset, 1);
+	usleep_range(1000, 2000);
+
+	if (anx6345->panel)
+		drm_panel_unprepare(anx6345->panel);
+
+	err = regulator_disable(anx6345->dvdd25);
+	if (err) {
+		DRM_ERROR("Failed to disable dvdd25 regulator: %d\n",
+			  err);
+		return;
+	}
+
+	usleep_range(5000, 10000);
+
+	err = regulator_disable(anx6345->dvdd12);
+	if (err) {
+		DRM_ERROR("Failed to disable dvdd12 regulator: %d\n",
+			  err);
+		return;
+	}
+
+	usleep_range(1000, 2000);
+
+	anx6345->powered = false;
+}
+
+static int anx6345_start(struct anx6345 *anx6345)
+{
+	int err;
+
+	if (!anx6345->powered)
+		anx6345_poweron(anx6345);
+
+	/* Power on needed modules */
+	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+				SP_POWERDOWN_CTRL_REG,
+				SP_VIDEO_PD | SP_LINK_PD);
+
+	err = anx6345_tx_initialization(anx6345);
+	if (err) {
+		DRM_ERROR("Failed eDP transmitter initialization: %d\n", err);
+		anx6345_poweroff(anx6345);
+		return err;
+	}
+
+	err = anx6345_dp_link_training(anx6345);
+	if (err) {
+		DRM_ERROR("Failed link training: %d\n", err);
+		anx6345_poweroff(anx6345);
+		return err;
+	}
+
+	/*
+	 * This delay seems to help keep the hardware in a good state. Without
+	 * it, there are times where it fails silently.
+	 */
+	usleep_range(10000, 15000);
+
+	return 0;
+}
+
+static int anx6345_config_dp_output(struct anx6345 *anx6345)
+{
+	int err;
+
+	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
+				 SP_VIDEO_MUTE);
+	if (err)
+		return err;
+
+	/* Enable DP output */
+	err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
+			       SP_VIDEO_EN);
+	if (err)
+		return err;
+
+	/* Force stream valid */
+	return anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
+			       SP_DP_SYSTEM_CTRL_BASE + 3,
+			       SP_STRM_FORCE | SP_STRM_CTRL);
+}
+
+static int anx6345_get_downstream_info(struct anx6345 *anx6345)
+{
+	u8 value;
+	int err;
+
+	err = drm_dp_dpcd_readb(&anx6345->aux, DP_SINK_COUNT, &value);
+	if (err < 0) {
+		DRM_ERROR("Get sink count failed %d\n", err);
+		return err;
+	}
+
+	if (!DP_GET_SINK_COUNT(value)) {
+		DRM_ERROR("Downstream disconnected\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int anx6345_get_modes(struct drm_connector *connector)
+{
+	struct anx6345 *anx6345 = connector_to_anx6345(connector);
+	int err, num_modes = 0;
+	bool power_off = false;
+
+	mutex_lock(&anx6345->lock);
+
+	if (!anx6345->edid) {
+		if (!anx6345->powered) {
+			anx6345_poweron(anx6345);
+			power_off = true;
+		}
+
+		err = anx6345_get_downstream_info(anx6345);
+		if (err) {
+			DRM_ERROR("Failed to get downstream info: %d\n", err);
+			goto unlock;
+		}
+
+		anx6345->edid = drm_get_edid(connector, &anx6345->aux.ddc);
+		if (!anx6345->edid)
+			DRM_ERROR("Failed to read EDID from panel\n");
+
+		err = drm_connector_update_edid_property(connector,
+							 anx6345->edid);
+		if (err) {
+			DRM_ERROR("Failed to update EDID property: %d\n", err);
+			goto unlock;
+		}
+	}
+
+	num_modes += drm_add_edid_modes(connector, anx6345->edid);
+
+	/* Driver currently supports only 6bpc */
+	connector->display_info.bpc = 6;
+
+unlock:
+	if (power_off)
+		anx6345_poweroff(anx6345);
+
+	mutex_unlock(&anx6345->lock);
+
+	if (!num_modes && anx6345->panel)
+		num_modes += drm_panel_get_modes(anx6345->panel, connector);
+
+	return num_modes;
+}
+
+static const struct drm_connector_helper_funcs anx6345_connector_helper_funcs = {
+	.get_modes = anx6345_get_modes,
+};
+
+static void
+anx6345_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs anx6345_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = anx6345_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int anx6345_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
+{
+	struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
+	int err;
+
+	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+		DRM_ERROR("Fix bridge driver to make connector optional!");
+		return -EINVAL;
+	}
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	/* Register aux channel */
+	anx6345->aux.name = "DP-AUX";
+	anx6345->aux.dev = &anx6345->client->dev;
+	anx6345->aux.transfer = anx6345_aux_transfer;
+
+	err = drm_dp_aux_register(&anx6345->aux);
+	if (err < 0) {
+		DRM_ERROR("Failed to register aux channel: %d\n", err);
+		return err;
+	}
+
+	err = drm_connector_init(bridge->dev, &anx6345->connector,
+				 &anx6345_connector_funcs,
+				 DRM_MODE_CONNECTOR_eDP);
+	if (err) {
+		DRM_ERROR("Failed to initialize connector: %d\n", err);
+		return err;
+	}
+
+	drm_connector_helper_add(&anx6345->connector,
+				 &anx6345_connector_helper_funcs);
+
+	err = drm_connector_register(&anx6345->connector);
+	if (err) {
+		DRM_ERROR("Failed to register connector: %d\n", err);
+		return err;
+	}
+
+	anx6345->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	err = drm_connector_attach_encoder(&anx6345->connector,
+					   bridge->encoder);
+	if (err) {
+		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static enum drm_mode_status
+anx6345_bridge_mode_valid(struct drm_bridge *bridge,
+			  const struct drm_display_info *info,
+			  const struct drm_display_mode *mode)
+{
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	/* Max 1200p at 5.4 Ghz, one lane */
+	if (mode->clock > 154000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void anx6345_bridge_disable(struct drm_bridge *bridge)
+{
+	struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
+
+	/* Power off all modules except configuration registers access */
+	anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
+			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+	if (anx6345->panel)
+		drm_panel_disable(anx6345->panel);
+
+	if (anx6345->powered)
+		anx6345_poweroff(anx6345);
+}
+
+static void anx6345_bridge_enable(struct drm_bridge *bridge)
+{
+	struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
+	int err;
+
+	if (anx6345->panel)
+		drm_panel_enable(anx6345->panel);
+
+	err = anx6345_start(anx6345);
+	if (err) {
+		DRM_ERROR("Failed to initialize: %d\n", err);
+		return;
+	}
+
+	err = anx6345_config_dp_output(anx6345);
+	if (err)
+		DRM_ERROR("Failed to enable DP output: %d\n", err);
+}
+
+static const struct drm_bridge_funcs anx6345_bridge_funcs = {
+	.attach = anx6345_bridge_attach,
+	.mode_valid = anx6345_bridge_mode_valid,
+	.disable = anx6345_bridge_disable,
+	.enable = anx6345_bridge_enable,
+};
+
+static void unregister_i2c_dummy_clients(struct anx6345 *anx6345)
+{
+	unsigned int i;
+
+	for (i = 1; i < ARRAY_SIZE(anx6345->i2c_clients); i++)
+		if (anx6345->i2c_clients[i] &&
+		    anx6345->i2c_clients[i]->addr != anx6345->client->addr)
+			i2c_unregister_device(anx6345->i2c_clients[i]);
+}
+
+static const struct regmap_config anx6345_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xff,
+	.cache_type = REGCACHE_NONE,
+};
+
+static const u16 anx6345_chipid_list[] = {
+	0x6345,
+};
+
+static bool anx6345_get_chip_id(struct anx6345 *anx6345)
+{
+	unsigned int i, idl, idh, version;
+
+	if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDL_REG, &idl))
+		return false;
+
+	if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDH_REG, &idh))
+		return false;
+
+	anx6345->chipid = (u8)idl | ((u8)idh << 8);
+
+	if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_VERSION_REG,
+			&version))
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(anx6345_chipid_list); i++) {
+		if (anx6345->chipid == anx6345_chipid_list[i]) {
+			DRM_INFO("Found ANX%x (ver. %d) eDP Transmitter\n",
+				 anx6345->chipid, version);
+			return true;
+		}
+	}
+
+	DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n",
+		  anx6345->chipid, version);
+
+	return false;
+}
+
+static int anx6345_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct anx6345 *anx6345;
+	struct device *dev;
+	int i, err;
+
+	anx6345 = devm_kzalloc(&client->dev, sizeof(*anx6345), GFP_KERNEL);
+	if (!anx6345)
+		return -ENOMEM;
+
+	mutex_init(&anx6345->lock);
+
+	anx6345->bridge.of_node = client->dev.of_node;
+
+	anx6345->client = client;
+	i2c_set_clientdata(client, anx6345);
+
+	dev = &anx6345->client->dev;
+
+	err = drm_of_find_panel_or_bridge(client->dev.of_node, 1, 0,
+					  &anx6345->panel, NULL);
+	if (err == -EPROBE_DEFER)
+		return err;
+
+	if (err)
+		DRM_DEBUG("No panel found\n");
+
+	/* 1.2V digital core power regulator  */
+	anx6345->dvdd12 = devm_regulator_get(dev, "dvdd12");
+	if (IS_ERR(anx6345->dvdd12)) {
+		if (PTR_ERR(anx6345->dvdd12) != -EPROBE_DEFER)
+			DRM_ERROR("Failed to get dvdd12 supply (%ld)\n",
+				  PTR_ERR(anx6345->dvdd12));
+		return PTR_ERR(anx6345->dvdd12);
+	}
+
+	/* 2.5V digital core power regulator  */
+	anx6345->dvdd25 = devm_regulator_get(dev, "dvdd25");
+	if (IS_ERR(anx6345->dvdd25)) {
+		if (PTR_ERR(anx6345->dvdd25) != -EPROBE_DEFER)
+			DRM_ERROR("Failed to get dvdd25 supply (%ld)\n",
+				  PTR_ERR(anx6345->dvdd25));
+		return PTR_ERR(anx6345->dvdd25);
+	}
+
+	/* GPIO for chip reset */
+	anx6345->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(anx6345->gpiod_reset)) {
+		DRM_ERROR("Reset gpio not found\n");
+		return PTR_ERR(anx6345->gpiod_reset);
+	}
+
+	/* Map slave addresses of ANX6345 */
+	for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
+		if (anx6345_i2c_addresses[i] >> 1 != client->addr)
+			anx6345->i2c_clients[i] = i2c_new_dummy_device(client->adapter,
+						anx6345_i2c_addresses[i] >> 1);
+		else
+			anx6345->i2c_clients[i] = client;
+
+		if (IS_ERR(anx6345->i2c_clients[i])) {
+			err = PTR_ERR(anx6345->i2c_clients[i]);
+			DRM_ERROR("Failed to reserve I2C bus %02x\n",
+				  anx6345_i2c_addresses[i]);
+			goto err_unregister_i2c;
+		}
+
+		anx6345->map[i] = devm_regmap_init_i2c(anx6345->i2c_clients[i],
+						       &anx6345_regmap_config);
+		if (IS_ERR(anx6345->map[i])) {
+			err = PTR_ERR(anx6345->map[i]);
+			DRM_ERROR("Failed regmap initialization %02x\n",
+				  anx6345_i2c_addresses[i]);
+			goto err_unregister_i2c;
+		}
+	}
+
+	/* Look for supported chip ID */
+	anx6345_poweron(anx6345);
+	if (anx6345_get_chip_id(anx6345)) {
+		anx6345->bridge.funcs = &anx6345_bridge_funcs;
+		drm_bridge_add(&anx6345->bridge);
+
+		return 0;
+	} else {
+		anx6345_poweroff(anx6345);
+		err = -ENODEV;
+	}
+
+err_unregister_i2c:
+	unregister_i2c_dummy_clients(anx6345);
+	return err;
+}
+
+static int anx6345_i2c_remove(struct i2c_client *client)
+{
+	struct anx6345 *anx6345 = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&anx6345->bridge);
+
+	unregister_i2c_dummy_clients(anx6345);
+
+	kfree(anx6345->edid);
+
+	mutex_destroy(&anx6345->lock);
+
+	return 0;
+}
+
+static const struct i2c_device_id anx6345_id[] = {
+	{ "anx6345", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, anx6345_id);
+
+static const struct of_device_id anx6345_match_table[] = {
+	{ .compatible = "analogix,anx6345", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, anx6345_match_table);
+
+static struct i2c_driver anx6345_driver = {
+	.driver = {
+		   .name = "anx6345",
+		   .of_match_table = of_match_ptr(anx6345_match_table),
+		  },
+	.probe = anx6345_i2c_probe,
+	.remove = anx6345_i2c_remove,
+	.id_table = anx6345_id,
+};
+module_i2c_driver(anx6345_driver);
+
+MODULE_DESCRIPTION("ANX6345 eDP Transmitter driver");
+MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
new file mode 100644
index 000000000..81debd02c
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
@@ -0,0 +1,1391 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include "analogix-anx78xx.h"
+
+#define I2C_NUM_ADDRESSES	5
+#define I2C_IDX_TX_P0		0
+#define I2C_IDX_TX_P1		1
+#define I2C_IDX_TX_P2		2
+#define I2C_IDX_RX_P0		3
+#define I2C_IDX_RX_P1		4
+
+#define XTAL_CLK		270 /* 27M */
+
+static const u8 anx7808_i2c_addresses[] = {
+	[I2C_IDX_TX_P0] = 0x78,
+	[I2C_IDX_TX_P1] = 0x7a,
+	[I2C_IDX_TX_P2] = 0x72,
+	[I2C_IDX_RX_P0] = 0x7e,
+	[I2C_IDX_RX_P1] = 0x80,
+};
+
+static const u8 anx781x_i2c_addresses[] = {
+	[I2C_IDX_TX_P0] = 0x70,
+	[I2C_IDX_TX_P1] = 0x7a,
+	[I2C_IDX_TX_P2] = 0x72,
+	[I2C_IDX_RX_P0] = 0x7e,
+	[I2C_IDX_RX_P1] = 0x80,
+};
+
+struct anx78xx_platform_data {
+	struct regulator *dvdd10;
+	struct gpio_desc *gpiod_hpd;
+	struct gpio_desc *gpiod_pd;
+	struct gpio_desc *gpiod_reset;
+
+	int hpd_irq;
+	int intp_irq;
+};
+
+struct anx78xx {
+	struct drm_dp_aux aux;
+	struct drm_bridge bridge;
+	struct i2c_client *client;
+	struct edid *edid;
+	struct drm_connector connector;
+	struct anx78xx_platform_data pdata;
+	struct mutex lock;
+
+	/*
+	 * I2C Slave addresses of ANX7814 are mapped as TX_P0, TX_P1, TX_P2,
+	 * RX_P0 and RX_P1.
+	 */
+	struct i2c_client *i2c_dummy[I2C_NUM_ADDRESSES];
+	struct regmap *map[I2C_NUM_ADDRESSES];
+
+	u16 chipid;
+	u8 dpcd[DP_RECEIVER_CAP_SIZE];
+
+	bool powered;
+};
+
+static inline struct anx78xx *connector_to_anx78xx(struct drm_connector *c)
+{
+	return container_of(c, struct anx78xx, connector);
+}
+
+static inline struct anx78xx *bridge_to_anx78xx(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct anx78xx, bridge);
+}
+
+static int anx78xx_set_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, mask);
+}
+
+static int anx78xx_clear_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, 0);
+}
+
+static ssize_t anx78xx_aux_transfer(struct drm_dp_aux *aux,
+				    struct drm_dp_aux_msg *msg)
+{
+	struct anx78xx *anx78xx = container_of(aux, struct anx78xx, aux);
+	return anx_dp_aux_transfer(anx78xx->map[I2C_IDX_TX_P0], msg);
+}
+
+static int anx78xx_set_hpd(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+				 SP_TMDS_CTRL_BASE + 7, SP_PD_RT);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG,
+			       SP_HPD_OUT);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_clear_hpd(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG,
+				 SP_HPD_OUT);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_TMDS_CTRL_BASE + 7, SP_PD_RT);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct reg_sequence tmds_phy_initialization[] = {
+	{ SP_TMDS_CTRL_BASE +  1, 0x90 },
+	{ SP_TMDS_CTRL_BASE +  2, 0xa9 },
+	{ SP_TMDS_CTRL_BASE +  6, 0x92 },
+	{ SP_TMDS_CTRL_BASE +  7, 0x80 },
+	{ SP_TMDS_CTRL_BASE + 20, 0xf2 },
+	{ SP_TMDS_CTRL_BASE + 22, 0xc4 },
+	{ SP_TMDS_CTRL_BASE + 23, 0x18 },
+};
+
+static int anx78xx_rx_initialization(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG,
+			   SP_AUD_MUTE | SP_VID_MUTE);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_CHIP_CTRL_REG,
+			       SP_MAN_HDMI5V_DET | SP_PLLLOCK_CKDT_EN |
+			       SP_DIGITAL_CKDT_EN);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST |
+			       SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+				 SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST |
+				 SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST);
+	if (err)
+		return err;
+
+	/* Sync detect change, GP set mute */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_AUD_EXCEPTION_ENABLE_BASE + 1, BIT(5) |
+			       BIT(6));
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_AUD_EXCEPTION_ENABLE_BASE + 3,
+			       SP_AEC_EN21);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_AUDVID_CTRL_REG,
+			       SP_AVC_EN | SP_AAC_OE | SP_AAC_EN);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+				 SP_SYSTEM_POWER_DOWN1_REG, SP_PWDN_CTRL);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_VID_DATA_RANGE_CTRL_REG, SP_R2Y_INPUT_LIMIT);
+	if (err)
+		return err;
+
+	/* Enable DDC stretch */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_DP_EXTRA_I2C_DEV_ADDR_REG, SP_I2C_EXTRA_ADDR);
+	if (err)
+		return err;
+
+	/* TMDS phy initialization */
+	err = regmap_multi_reg_write(anx78xx->map[I2C_IDX_RX_P0],
+				     tmds_phy_initialization,
+				     ARRAY_SIZE(tmds_phy_initialization));
+	if (err)
+		return err;
+
+	err = anx78xx_clear_hpd(anx78xx);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const u8 dp_tx_output_precise_tune_bits[20] = {
+	0x01, 0x03, 0x07, 0x7f, 0x71, 0x6b, 0x7f,
+	0x73, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00,
+	0x0c, 0x42, 0x1e, 0x3e, 0x72, 0x7e,
+};
+
+static int anx78xx_link_phy_initialization(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/*
+	 * REVISIT : It is writing to a RESERVED bits in Analog Control 0
+	 * register.
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_ANALOG_CTRL0_REG,
+			   0x02);
+	if (err)
+		return err;
+
+	/*
+	 * Write DP TX output emphasis precise tune bits.
+	 */
+	err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P1],
+				SP_DP_TX_LT_CTRL0_REG,
+				dp_tx_output_precise_tune_bits,
+				ARRAY_SIZE(dp_tx_output_precise_tune_bits));
+
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_xtal_clk_sel(struct anx78xx *anx78xx)
+{
+	unsigned int value;
+	int err;
+
+	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_ANALOG_DEBUG2_REG,
+				 SP_XTAL_FRQ | SP_FORCE_SW_OFF_BYPASS,
+				 SP_XTAL_FRQ_27M);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL3_REG,
+			   XTAL_CLK & SP_WAIT_COUNTER_7_0_MASK);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL4_REG,
+			   ((XTAL_CLK & 0xff00) >> 2) | (XTAL_CLK / 10));
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_I2C_GEN_10US_TIMER0_REG, XTAL_CLK & 0xff);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_I2C_GEN_10US_TIMER1_REG,
+			   (XTAL_CLK & 0xff00) >> 8);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_MISC_CTRL_REG,
+			   XTAL_CLK / 10 - 1);
+	if (err)
+		return err;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_RX_P0],
+			  SP_HDMI_US_TIMER_CTRL_REG,
+			  &value);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0],
+			   SP_HDMI_US_TIMER_CTRL_REG,
+			   (value & SP_MS_TIMER_MARGIN_10_8_MASK) |
+			   ((((XTAL_CLK / 10) >> 1) - 2) << 3));
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct reg_sequence otp_key_protect[] = {
+	{ SP_OTP_KEY_PROTECT1_REG, SP_OTP_PSW1 },
+	{ SP_OTP_KEY_PROTECT2_REG, SP_OTP_PSW2 },
+	{ SP_OTP_KEY_PROTECT3_REG, SP_OTP_PSW3 },
+};
+
+static int anx78xx_tx_initialization(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/* Set terminal resistor to 50 ohm */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
+			   0x30);
+	if (err)
+		return err;
+
+	/* Enable aux double diff output */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_AUX_CH_CTRL2_REG, 0x08);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_DP_HDCP_CTRL_REG, SP_AUTO_EN |
+				 SP_AUTO_START);
+	if (err)
+		return err;
+
+	err = regmap_multi_reg_write(anx78xx->map[I2C_IDX_TX_P0],
+				     otp_key_protect,
+				     ARRAY_SIZE(otp_key_protect));
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_HDCP_KEY_COMMAND_REG, SP_DISABLE_SYNC_HDCP);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL8_REG,
+			   SP_VID_VRES_TH);
+	if (err)
+		return err;
+
+	/*
+	 * DP HDCP auto authentication wait timer (when downstream starts to
+	 * auth, DP side will wait for this period then do auth automatically)
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_HDCP_AUTO_TIMER_REG,
+			   0x00);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_HDCP_CTRL_REG, SP_LINK_POLLING);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_LINK_DEBUG_CTRL_REG, SP_M_VID_DEBUG);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2],
+			       SP_ANALOG_DEBUG2_REG, SP_POWERON_TIME_1P5MS);
+	if (err)
+		return err;
+
+	err = anx78xx_xtal_clk_sel(anx78xx);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_DEFER_CTRL_REG,
+			   SP_DEFER_CTRL_EN | 0x0c);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_POLLING_CTRL_REG,
+			       SP_AUTO_POLLING_DISABLE);
+	if (err)
+		return err;
+
+	/*
+	 * Short the link integrity check timer to speed up bstatus
+	 * polling for HDCP CTS item 1A-07
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_HDCP_LINK_CHECK_TIMER_REG, 0x1d);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_MISC_CTRL_REG, SP_EQ_TRAINING_LOOP);
+	if (err)
+		return err;
+
+	/* Power down the main link by default */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+	if (err)
+		return err;
+
+	err = anx78xx_link_phy_initialization(anx78xx);
+	if (err)
+		return err;
+
+	/* Gen m_clk with downspreading */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_M_CALCULATION_CTRL_REG, SP_M_GEN_CLK_SEL);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_enable_interrupts(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/*
+	 * BIT0: INT pin assertion polarity: 1 = assert high
+	 * BIT1: INT pin output type: 0 = push/pull
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_INT_CTRL_REG, 0x01);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2],
+			   SP_COMMON_INT_MASK4_REG, SP_HPD_LOST | SP_HPD_PLUG);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_MASK1_REG,
+			   SP_TRAINING_FINISH);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_MASK1_REG,
+			   SP_CKDT_CHG | SP_SCDT_CHG);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static void anx78xx_poweron(struct anx78xx *anx78xx)
+{
+	struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+	int err;
+
+	if (WARN_ON(anx78xx->powered))
+		return;
+
+	if (pdata->dvdd10) {
+		err = regulator_enable(pdata->dvdd10);
+		if (err) {
+			DRM_ERROR("Failed to enable DVDD10 regulator: %d\n",
+				  err);
+			return;
+		}
+
+		usleep_range(1000, 2000);
+	}
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_pd, 0);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
+
+	/* Power on registers module */
+	anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+	anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+			   SP_REGISTER_PD | SP_TOTAL_PD);
+
+	anx78xx->powered = true;
+}
+
+static void anx78xx_poweroff(struct anx78xx *anx78xx)
+{
+	struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+	int err;
+
+	if (WARN_ON(!anx78xx->powered))
+		return;
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_pd, 1);
+	usleep_range(1000, 2000);
+
+	if (pdata->dvdd10) {
+		err = regulator_disable(pdata->dvdd10);
+		if (err) {
+			DRM_ERROR("Failed to disable DVDD10 regulator: %d\n",
+				  err);
+			return;
+		}
+
+		usleep_range(1000, 2000);
+	}
+
+	anx78xx->powered = false;
+}
+
+static int anx78xx_start(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/* Power on all modules */
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_POWERDOWN_CTRL_REG,
+				 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD |
+				 SP_LINK_PD);
+
+	err = anx78xx_enable_interrupts(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to enable interrupts: %d\n", err);
+		goto err_poweroff;
+	}
+
+	err = anx78xx_rx_initialization(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed receiver initialization: %d\n", err);
+		goto err_poweroff;
+	}
+
+	err = anx78xx_tx_initialization(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed transmitter initialization: %d\n", err);
+		goto err_poweroff;
+	}
+
+	/*
+	 * This delay seems to help keep the hardware in a good state. Without
+	 * it, there are times where it fails silently.
+	 */
+	usleep_range(10000, 15000);
+
+	return 0;
+
+err_poweroff:
+	DRM_ERROR("Failed SlimPort transmitter initialization: %d\n", err);
+	anx78xx_poweroff(anx78xx);
+
+	return err;
+}
+
+static int anx78xx_init_pdata(struct anx78xx *anx78xx)
+{
+	struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+	struct device *dev = &anx78xx->client->dev;
+
+	/* 1.0V digital core power regulator  */
+	pdata->dvdd10 = devm_regulator_get(dev, "dvdd10");
+	if (IS_ERR(pdata->dvdd10)) {
+		if (PTR_ERR(pdata->dvdd10) != -EPROBE_DEFER)
+			DRM_ERROR("DVDD10 regulator not found\n");
+
+		return PTR_ERR(pdata->dvdd10);
+	}
+
+	/* GPIO for HPD */
+	pdata->gpiod_hpd = devm_gpiod_get(dev, "hpd", GPIOD_IN);
+	if (IS_ERR(pdata->gpiod_hpd))
+		return PTR_ERR(pdata->gpiod_hpd);
+
+	/* GPIO for chip power down */
+	pdata->gpiod_pd = devm_gpiod_get(dev, "pd", GPIOD_OUT_HIGH);
+	if (IS_ERR(pdata->gpiod_pd))
+		return PTR_ERR(pdata->gpiod_pd);
+
+	/* GPIO for chip reset */
+	pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+
+	return PTR_ERR_OR_ZERO(pdata->gpiod_reset);
+}
+
+static int anx78xx_dp_link_training(struct anx78xx *anx78xx)
+{
+	u8 dp_bw, dpcd[2];
+	int err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG,
+			   0x0);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_POWERDOWN_CTRL_REG,
+				 SP_TOTAL_PD);
+	if (err)
+		return err;
+
+	err = drm_dp_dpcd_readb(&anx78xx->aux, DP_MAX_LINK_RATE, &dp_bw);
+	if (err < 0)
+		return err;
+
+	switch (dp_bw) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+	case DP_LINK_BW_5_4:
+		break;
+
+	default:
+		DRM_DEBUG_KMS("DP bandwidth (%#02x) not supported\n", dp_bw);
+		return -EINVAL;
+	}
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+			       SP_VIDEO_MUTE);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_VID_CTRL1_REG, SP_VIDEO_EN);
+	if (err)
+		return err;
+
+	/* Get DPCD info */
+	err = drm_dp_dpcd_read(&anx78xx->aux, DP_DPCD_REV,
+			       &anx78xx->dpcd, DP_RECEIVER_CAP_SIZE);
+	if (err < 0) {
+		DRM_ERROR("Failed to read DPCD: %d\n", err);
+		return err;
+	}
+
+	/* Clear channel x SERDES power down */
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+	if (err)
+		return err;
+
+	/*
+	 * Power up the sink (DP_SET_POWER register is only available on DPCD
+	 * v1.1 and later).
+	 */
+	if (anx78xx->dpcd[DP_DPCD_REV] >= 0x11) {
+		err = drm_dp_dpcd_readb(&anx78xx->aux, DP_SET_POWER, &dpcd[0]);
+		if (err < 0) {
+			DRM_ERROR("Failed to read DP_SET_POWER register: %d\n",
+				  err);
+			return err;
+		}
+
+		dpcd[0] &= ~DP_SET_POWER_MASK;
+		dpcd[0] |= DP_SET_POWER_D0;
+
+		err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_SET_POWER, dpcd[0]);
+		if (err < 0) {
+			DRM_ERROR("Failed to power up DisplayPort link: %d\n",
+				  err);
+			return err;
+		}
+
+		/*
+		 * According to the DP 1.1 specification, a "Sink Device must
+		 * exit the power saving state within 1 ms" (Section 2.5.3.1,
+		 * Table 5-52, "Sink Control Field" (register 0x600).
+		 */
+		usleep_range(1000, 2000);
+	}
+
+	/* Possibly enable downspread on the sink */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_DP_DOWNSPREAD_CTRL1_REG, 0);
+	if (err)
+		return err;
+
+	if (anx78xx->dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) {
+		DRM_DEBUG("Enable downspread on the sink\n");
+		/* 4000PPM */
+		err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+				   SP_DP_DOWNSPREAD_CTRL1_REG, 8);
+		if (err)
+			return err;
+
+		err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL,
+					 DP_SPREAD_AMP_0_5);
+		if (err < 0)
+			return err;
+	} else {
+		err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL, 0);
+		if (err < 0)
+			return err;
+	}
+
+	/* Set the lane count and the link rate on the sink */
+	if (drm_dp_enhanced_frame_cap(anx78xx->dpcd))
+		err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+				       SP_DP_SYSTEM_CTRL_BASE + 4,
+				       SP_ENHANCED_MODE);
+	else
+		err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+					 SP_DP_SYSTEM_CTRL_BASE + 4,
+					 SP_ENHANCED_MODE);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_DP_MAIN_LINK_BW_SET_REG,
+			   anx78xx->dpcd[DP_MAX_LINK_RATE]);
+	if (err)
+		return err;
+
+	dpcd[1] = drm_dp_max_lane_count(anx78xx->dpcd);
+
+	if (drm_dp_enhanced_frame_cap(anx78xx->dpcd))
+		dpcd[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+
+	err = drm_dp_dpcd_write(&anx78xx->aux, DP_LINK_BW_SET, dpcd,
+				sizeof(dpcd));
+	if (err < 0) {
+		DRM_ERROR("Failed to configure link: %d\n", err);
+		return err;
+	}
+
+	/* Start training on the source */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_LT_CTRL_REG,
+			   SP_LT_EN);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_config_dp_output(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+				 SP_VIDEO_MUTE);
+	if (err)
+		return err;
+
+	/* Enable DP output */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+			       SP_VIDEO_EN);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_send_video_infoframe(struct anx78xx *anx78xx,
+					struct hdmi_avi_infoframe *frame)
+{
+	u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
+	int err;
+
+	err = hdmi_avi_infoframe_pack(frame, buffer, sizeof(buffer));
+	if (err < 0) {
+		DRM_ERROR("Failed to pack AVI infoframe: %d\n", err);
+		return err;
+	}
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN);
+	if (err)
+		return err;
+
+	err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P2],
+				SP_INFOFRAME_AVI_DB1_REG, buffer,
+				frame->length);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_UD);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_get_downstream_info(struct anx78xx *anx78xx)
+{
+	u8 value;
+	int err;
+
+	err = drm_dp_dpcd_readb(&anx78xx->aux, DP_SINK_COUNT, &value);
+	if (err < 0) {
+		DRM_ERROR("Get sink count failed %d\n", err);
+		return err;
+	}
+
+	if (!DP_GET_SINK_COUNT(value)) {
+		DRM_ERROR("Downstream disconnected\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int anx78xx_get_modes(struct drm_connector *connector)
+{
+	struct anx78xx *anx78xx = connector_to_anx78xx(connector);
+	int err, num_modes = 0;
+
+	if (WARN_ON(!anx78xx->powered))
+		return 0;
+
+	if (anx78xx->edid)
+		return drm_add_edid_modes(connector, anx78xx->edid);
+
+	mutex_lock(&anx78xx->lock);
+
+	err = anx78xx_get_downstream_info(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to get downstream info: %d\n", err);
+		goto unlock;
+	}
+
+	anx78xx->edid = drm_get_edid(connector, &anx78xx->aux.ddc);
+	if (!anx78xx->edid) {
+		DRM_ERROR("Failed to read EDID\n");
+		goto unlock;
+	}
+
+	err = drm_connector_update_edid_property(connector,
+						 anx78xx->edid);
+	if (err) {
+		DRM_ERROR("Failed to update EDID property: %d\n", err);
+		goto unlock;
+	}
+
+	num_modes = drm_add_edid_modes(connector, anx78xx->edid);
+
+unlock:
+	mutex_unlock(&anx78xx->lock);
+
+	return num_modes;
+}
+
+static const struct drm_connector_helper_funcs anx78xx_connector_helper_funcs = {
+	.get_modes = anx78xx_get_modes,
+};
+
+static enum drm_connector_status anx78xx_detect(struct drm_connector *connector,
+						bool force)
+{
+	struct anx78xx *anx78xx = connector_to_anx78xx(connector);
+
+	if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd))
+		return connector_status_disconnected;
+
+	return connector_status_connected;
+}
+
+static const struct drm_connector_funcs anx78xx_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = anx78xx_detect,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int anx78xx_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+	int err;
+
+	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+		DRM_ERROR("Fix bridge driver to make connector optional!");
+		return -EINVAL;
+	}
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	/* Register aux channel */
+	anx78xx->aux.name = "DP-AUX";
+	anx78xx->aux.dev = &anx78xx->client->dev;
+	anx78xx->aux.transfer = anx78xx_aux_transfer;
+
+	err = drm_dp_aux_register(&anx78xx->aux);
+	if (err < 0) {
+		DRM_ERROR("Failed to register aux channel: %d\n", err);
+		return err;
+	}
+
+	err = drm_connector_init(bridge->dev, &anx78xx->connector,
+				 &anx78xx_connector_funcs,
+				 DRM_MODE_CONNECTOR_DisplayPort);
+	if (err) {
+		DRM_ERROR("Failed to initialize connector: %d\n", err);
+		return err;
+	}
+
+	drm_connector_helper_add(&anx78xx->connector,
+				 &anx78xx_connector_helper_funcs);
+
+	err = drm_connector_register(&anx78xx->connector);
+	if (err) {
+		DRM_ERROR("Failed to register connector: %d\n", err);
+		return err;
+	}
+
+	anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	err = drm_connector_attach_encoder(&anx78xx->connector,
+					   bridge->encoder);
+	if (err) {
+		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static enum drm_mode_status
+anx78xx_bridge_mode_valid(struct drm_bridge *bridge,
+			  const struct drm_display_info *info,
+			  const struct drm_display_mode *mode)
+{
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	/* Max 1200p at 5.4 Ghz, one lane */
+	if (mode->clock > 154000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void anx78xx_bridge_disable(struct drm_bridge *bridge)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+
+	/* Power off all modules except configuration registers access */
+	anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+}
+
+static void anx78xx_bridge_mode_set(struct drm_bridge *bridge,
+				const struct drm_display_mode *mode,
+				const struct drm_display_mode *adjusted_mode)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+	struct hdmi_avi_infoframe frame;
+	int err;
+
+	if (WARN_ON(!anx78xx->powered))
+		return;
+
+	mutex_lock(&anx78xx->lock);
+
+	err = drm_hdmi_avi_infoframe_from_display_mode(&frame,
+						       &anx78xx->connector,
+						       adjusted_mode);
+	if (err) {
+		DRM_ERROR("Failed to setup AVI infoframe: %d\n", err);
+		goto unlock;
+	}
+
+	err = anx78xx_send_video_infoframe(anx78xx, &frame);
+	if (err)
+		DRM_ERROR("Failed to send AVI infoframe: %d\n", err);
+
+unlock:
+	mutex_unlock(&anx78xx->lock);
+}
+
+static void anx78xx_bridge_enable(struct drm_bridge *bridge)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+	int err;
+
+	err = anx78xx_start(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to initialize: %d\n", err);
+		return;
+	}
+
+	err = anx78xx_set_hpd(anx78xx);
+	if (err)
+		DRM_ERROR("Failed to set HPD: %d\n", err);
+}
+
+static const struct drm_bridge_funcs anx78xx_bridge_funcs = {
+	.attach = anx78xx_bridge_attach,
+	.mode_valid = anx78xx_bridge_mode_valid,
+	.disable = anx78xx_bridge_disable,
+	.mode_set = anx78xx_bridge_mode_set,
+	.enable = anx78xx_bridge_enable,
+};
+
+static irqreturn_t anx78xx_hpd_threaded_handler(int irq, void *data)
+{
+	struct anx78xx *anx78xx = data;
+	int err;
+
+	if (anx78xx->powered)
+		return IRQ_HANDLED;
+
+	mutex_lock(&anx78xx->lock);
+
+	/* Cable is pulled, power on the chip */
+	anx78xx_poweron(anx78xx);
+
+	err = anx78xx_enable_interrupts(anx78xx);
+	if (err)
+		DRM_ERROR("Failed to enable interrupts: %d\n", err);
+
+	mutex_unlock(&anx78xx->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int anx78xx_handle_dp_int_1(struct anx78xx *anx78xx, u8 irq)
+{
+	int err;
+
+	DRM_DEBUG_KMS("Handle DP interrupt 1: %02x\n", irq);
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG,
+			   irq);
+	if (err)
+		return err;
+
+	if (irq & SP_TRAINING_FINISH) {
+		DRM_DEBUG_KMS("IRQ: hardware link training finished\n");
+		err = anx78xx_config_dp_output(anx78xx);
+	}
+
+	return err;
+}
+
+static bool anx78xx_handle_common_int_4(struct anx78xx *anx78xx, u8 irq)
+{
+	bool event = false;
+	int err;
+
+	DRM_DEBUG_KMS("Handle common interrupt 4: %02x\n", irq);
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2],
+			   SP_COMMON_INT_STATUS4_REG, irq);
+	if (err) {
+		DRM_ERROR("Failed to write SP_COMMON_INT_STATUS4 %d\n", err);
+		return event;
+	}
+
+	if (irq & SP_HPD_LOST) {
+		DRM_DEBUG_KMS("IRQ: Hot plug detect - cable is pulled out\n");
+		event = true;
+		anx78xx_poweroff(anx78xx);
+		/* Free cached EDID */
+		kfree(anx78xx->edid);
+		anx78xx->edid = NULL;
+	} else if (irq & SP_HPD_PLUG) {
+		DRM_DEBUG_KMS("IRQ: Hot plug detect - cable plug\n");
+		event = true;
+	}
+
+	return event;
+}
+
+static void anx78xx_handle_hdmi_int_1(struct anx78xx *anx78xx, u8 irq)
+{
+	unsigned int value;
+	int err;
+
+	DRM_DEBUG_KMS("Handle HDMI interrupt 1: %02x\n", irq);
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG,
+			   irq);
+	if (err) {
+		DRM_ERROR("Write HDMI int 1 failed: %d\n", err);
+		return;
+	}
+
+	if ((irq & SP_CKDT_CHG) || (irq & SP_SCDT_CHG)) {
+		DRM_DEBUG_KMS("IRQ: HDMI input detected\n");
+
+		err = regmap_read(anx78xx->map[I2C_IDX_RX_P0],
+				  SP_SYSTEM_STATUS_REG, &value);
+		if (err) {
+			DRM_ERROR("Read system status reg failed: %d\n", err);
+			return;
+		}
+
+		if (!(value & SP_TMDS_CLOCK_DET)) {
+			DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI clock ***\n");
+			return;
+		}
+
+		if (!(value & SP_TMDS_DE_DET)) {
+			DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI signal ***\n");
+			return;
+		}
+
+		err = anx78xx_dp_link_training(anx78xx);
+		if (err)
+			DRM_ERROR("Failed to start link training: %d\n", err);
+	}
+}
+
+static irqreturn_t anx78xx_intp_threaded_handler(int unused, void *data)
+{
+	struct anx78xx *anx78xx = data;
+	bool event = false;
+	unsigned int irq;
+	int err;
+
+	mutex_lock(&anx78xx->lock);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG,
+			  &irq);
+	if (err) {
+		DRM_ERROR("Failed to read DP interrupt 1 status: %d\n", err);
+		goto unlock;
+	}
+
+	if (irq)
+		anx78xx_handle_dp_int_1(anx78xx, irq);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2],
+			  SP_COMMON_INT_STATUS4_REG, &irq);
+	if (err) {
+		DRM_ERROR("Failed to read common interrupt 4 status: %d\n",
+			  err);
+		goto unlock;
+	}
+
+	if (irq)
+		event = anx78xx_handle_common_int_4(anx78xx, irq);
+
+	/* Make sure we are still powered after handle HPD events */
+	if (!anx78xx->powered)
+		goto unlock;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG,
+			  &irq);
+	if (err) {
+		DRM_ERROR("Failed to read HDMI int 1 status: %d\n", err);
+		goto unlock;
+	}
+
+	if (irq)
+		anx78xx_handle_hdmi_int_1(anx78xx, irq);
+
+unlock:
+	mutex_unlock(&anx78xx->lock);
+
+	if (event)
+		drm_helper_hpd_irq_event(anx78xx->connector.dev);
+
+	return IRQ_HANDLED;
+}
+
+static void unregister_i2c_dummy_clients(struct anx78xx *anx78xx)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(anx78xx->i2c_dummy); i++)
+		i2c_unregister_device(anx78xx->i2c_dummy[i]);
+}
+
+static const struct regmap_config anx78xx_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const u16 anx78xx_chipid_list[] = {
+	0x7808,
+	0x7812,
+	0x7814,
+	0x7818,
+};
+
+static int anx78xx_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct anx78xx *anx78xx;
+	struct anx78xx_platform_data *pdata;
+	unsigned int i, idl, idh, version;
+	const u8 *i2c_addresses;
+	bool found = false;
+	int err;
+
+	anx78xx = devm_kzalloc(&client->dev, sizeof(*anx78xx), GFP_KERNEL);
+	if (!anx78xx)
+		return -ENOMEM;
+
+	pdata = &anx78xx->pdata;
+
+	mutex_init(&anx78xx->lock);
+
+#if IS_ENABLED(CONFIG_OF)
+	anx78xx->bridge.of_node = client->dev.of_node;
+#endif
+
+	anx78xx->client = client;
+	i2c_set_clientdata(client, anx78xx);
+
+	err = anx78xx_init_pdata(anx78xx);
+	if (err) {
+		if (err != -EPROBE_DEFER)
+			DRM_ERROR("Failed to initialize pdata: %d\n", err);
+
+		return err;
+	}
+
+	pdata->hpd_irq = gpiod_to_irq(pdata->gpiod_hpd);
+	if (pdata->hpd_irq < 0) {
+		DRM_ERROR("Failed to get HPD IRQ: %d\n", pdata->hpd_irq);
+		return -ENODEV;
+	}
+
+	pdata->intp_irq = client->irq;
+	if (!pdata->intp_irq) {
+		DRM_ERROR("Failed to get CABLE_DET and INTP IRQ\n");
+		return -ENODEV;
+	}
+
+	/* Map slave addresses of ANX7814 */
+	i2c_addresses = device_get_match_data(&client->dev);
+	for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
+		struct i2c_client *i2c_dummy;
+
+		i2c_dummy = i2c_new_dummy_device(client->adapter,
+						 i2c_addresses[i] >> 1);
+		if (IS_ERR(i2c_dummy)) {
+			err = PTR_ERR(i2c_dummy);
+			DRM_ERROR("Failed to reserve I2C bus %02x: %d\n",
+				  i2c_addresses[i], err);
+			goto err_unregister_i2c;
+		}
+
+		anx78xx->i2c_dummy[i] = i2c_dummy;
+		anx78xx->map[i] = devm_regmap_init_i2c(anx78xx->i2c_dummy[i],
+						       &anx78xx_regmap_config);
+		if (IS_ERR(anx78xx->map[i])) {
+			err = PTR_ERR(anx78xx->map[i]);
+			DRM_ERROR("Failed regmap initialization %02x\n",
+				  i2c_addresses[i]);
+			goto err_unregister_i2c;
+		}
+	}
+
+	/* Look for supported chip ID */
+	anx78xx_poweron(anx78xx);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDL_REG,
+			  &idl);
+	if (err)
+		goto err_poweroff;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDH_REG,
+			  &idh);
+	if (err)
+		goto err_poweroff;
+
+	anx78xx->chipid = (u8)idl | ((u8)idh << 8);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_VERSION_REG,
+			  &version);
+	if (err)
+		goto err_poweroff;
+
+	for (i = 0; i < ARRAY_SIZE(anx78xx_chipid_list); i++) {
+		if (anx78xx->chipid == anx78xx_chipid_list[i]) {
+			DRM_INFO("Found ANX%x (ver. %d) SlimPort Transmitter\n",
+				 anx78xx->chipid, version);
+			found = true;
+			break;
+		}
+	}
+
+	if (!found) {
+		DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n",
+			  anx78xx->chipid, version);
+		err = -ENODEV;
+		goto err_poweroff;
+	}
+
+	err = devm_request_threaded_irq(&client->dev, pdata->hpd_irq, NULL,
+					anx78xx_hpd_threaded_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"anx78xx-hpd", anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to request CABLE_DET threaded IRQ: %d\n",
+			  err);
+		goto err_poweroff;
+	}
+
+	err = devm_request_threaded_irq(&client->dev, pdata->intp_irq, NULL,
+					anx78xx_intp_threaded_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"anx78xx-intp", anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to request INTP threaded IRQ: %d\n", err);
+		goto err_poweroff;
+	}
+
+	anx78xx->bridge.funcs = &anx78xx_bridge_funcs;
+
+	drm_bridge_add(&anx78xx->bridge);
+
+	/* If cable is pulled out, just poweroff and wait for HPD event */
+	if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd))
+		anx78xx_poweroff(anx78xx);
+
+	return 0;
+
+err_poweroff:
+	anx78xx_poweroff(anx78xx);
+
+err_unregister_i2c:
+	unregister_i2c_dummy_clients(anx78xx);
+	return err;
+}
+
+static int anx78xx_i2c_remove(struct i2c_client *client)
+{
+	struct anx78xx *anx78xx = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&anx78xx->bridge);
+
+	unregister_i2c_dummy_clients(anx78xx);
+
+	kfree(anx78xx->edid);
+
+	return 0;
+}
+
+static const struct i2c_device_id anx78xx_id[] = {
+	{ "anx7814", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, anx78xx_id);
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id anx78xx_match_table[] = {
+	{ .compatible = "analogix,anx7808", .data = anx7808_i2c_addresses },
+	{ .compatible = "analogix,anx7812", .data = anx781x_i2c_addresses },
+	{ .compatible = "analogix,anx7814", .data = anx781x_i2c_addresses },
+	{ .compatible = "analogix,anx7818", .data = anx781x_i2c_addresses },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, anx78xx_match_table);
+#endif
+
+static struct i2c_driver anx78xx_driver = {
+	.driver = {
+		   .name = "anx7814",
+		   .of_match_table = of_match_ptr(anx78xx_match_table),
+		  },
+	.probe = anx78xx_i2c_probe,
+	.remove = anx78xx_i2c_remove,
+	.id_table = anx78xx_id,
+};
+module_i2c_driver(anx78xx_driver);
+
+MODULE_DESCRIPTION("ANX78xx SlimPort Transmitter driver");
+MODULE_AUTHOR("Enric Balletbo i Serra <enric.balletbo@collabora.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
new file mode 100644
index 000000000..db2a2725a
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ */
+
+#ifndef __ANX78xx_H
+#define __ANX78xx_H
+
+#include "analogix-i2c-dptx.h"
+#include "analogix-i2c-txcommon.h"
+
+/***************************************************************/
+/* Register definitions for RX_PO                              */
+/***************************************************************/
+
+/*
+ * System Control and Status
+ */
+
+/* Software Reset Register 1 */
+#define SP_SOFTWARE_RESET1_REG		0x11
+#define SP_VIDEO_RST			BIT(4)
+#define SP_HDCP_MAN_RST			BIT(2)
+#define SP_TMDS_RST			BIT(1)
+#define SP_SW_MAN_RST			BIT(0)
+
+/* System Status Register */
+#define SP_SYSTEM_STATUS_REG		0x14
+#define SP_TMDS_CLOCK_DET		BIT(1)
+#define SP_TMDS_DE_DET			BIT(0)
+
+/* HDMI Status Register */
+#define SP_HDMI_STATUS_REG		0x15
+#define SP_HDMI_AUD_LAYOUT		BIT(3)
+#define SP_HDMI_DET			BIT(0)
+#  define SP_DVI_MODE			0
+#  define SP_HDMI_MODE			1
+
+/* HDMI Mute Control Register */
+#define SP_HDMI_MUTE_CTRL_REG		0x16
+#define SP_AUD_MUTE			BIT(1)
+#define SP_VID_MUTE			BIT(0)
+
+/* System Power Down Register 1 */
+#define SP_SYSTEM_POWER_DOWN1_REG	0x18
+#define SP_PWDN_CTRL			BIT(0)
+
+/*
+ * Audio and Video Auto Control
+ */
+
+/* Auto Audio and Video Control register */
+#define SP_AUDVID_CTRL_REG		0x20
+#define SP_AVC_OE			BIT(7)
+#define SP_AAC_OE			BIT(6)
+#define SP_AVC_EN			BIT(1)
+#define SP_AAC_EN			BIT(0)
+
+/* Audio Exception Enable Registers */
+#define SP_AUD_EXCEPTION_ENABLE_BASE	(0x24 - 1)
+/* Bits for Audio Exception Enable Register 3 */
+#define SP_AEC_EN21			BIT(5)
+
+/*
+ * Interrupt
+ */
+
+/* Interrupt Status Register 1 */
+#define SP_INT_STATUS1_REG		0x31
+/* Bits for Interrupt Status Register 1 */
+#define SP_HDMI_DVI			BIT(7)
+#define SP_CKDT_CHG			BIT(6)
+#define SP_SCDT_CHG			BIT(5)
+#define SP_PCLK_CHG			BIT(4)
+#define SP_PLL_UNLOCK			BIT(3)
+#define SP_CABLE_PLUG_CHG		BIT(2)
+#define SP_SET_MUTE			BIT(1)
+#define SP_SW_INTR			BIT(0)
+/* Bits for Interrupt Status Register 2 */
+#define SP_HDCP_ERR			BIT(5)
+#define SP_AUDIO_SAMPLE_CHG		BIT(0)	/* undocumented */
+/* Bits for Interrupt Status Register 3 */
+#define SP_AUD_MODE_CHG			BIT(0)
+/* Bits for Interrupt Status Register 5 */
+#define SP_AUDIO_RCV			BIT(0)
+/* Bits for Interrupt Status Register 6 */
+#define SP_INT_STATUS6_REG		0x36
+#define SP_CTS_RCV			BIT(7)
+#define SP_NEW_AUD_PKT			BIT(4)
+#define SP_NEW_AVI_PKT			BIT(1)
+#define SP_NEW_CP_PKT			BIT(0)
+/* Bits for Interrupt Status Register 7 */
+#define SP_NO_VSI			BIT(7)
+#define SP_NEW_VS			BIT(4)
+
+/* Interrupt Mask 1 Status Registers */
+#define SP_INT_MASK1_REG		0x41
+
+/* HDMI US TIMER Control Register */
+#define SP_HDMI_US_TIMER_CTRL_REG	0x49
+#define SP_MS_TIMER_MARGIN_10_8_MASK	0x07
+
+/*
+ * TMDS Control
+ */
+
+/* TMDS Control Registers */
+#define SP_TMDS_CTRL_BASE		(0x50 - 1)
+/* Bits for TMDS Control Register 7 */
+#define SP_PD_RT			BIT(0)
+
+/*
+ * Video Control
+ */
+
+/* Video Status Register */
+#define SP_VIDEO_STATUS_REG		0x70
+#define SP_COLOR_DEPTH_MASK		0xf0
+#define SP_COLOR_DEPTH_SHIFT		4
+#  define SP_COLOR_DEPTH_MODE_LEGACY	0x00
+#  define SP_COLOR_DEPTH_MODE_24BIT	0x04
+#  define SP_COLOR_DEPTH_MODE_30BIT	0x05
+#  define SP_COLOR_DEPTH_MODE_36BIT	0x06
+#  define SP_COLOR_DEPTH_MODE_48BIT	0x07
+
+/* Video Data Range Control Register */
+#define SP_VID_DATA_RANGE_CTRL_REG	0x83
+#define SP_R2Y_INPUT_LIMIT		BIT(1)
+
+/* Pixel Clock High Resolution Counter Registers */
+#define SP_PCLK_HIGHRES_CNT_BASE	(0x8c - 1)
+
+/*
+ * Audio Control
+ */
+
+/* Number of Audio Channels Status Registers */
+#define SP_AUD_CH_STATUS_REG_NUM	6
+
+/* Audio IN S/PDIF Channel Status Registers */
+#define SP_AUD_SPDIF_CH_STATUS_BASE	0xc7
+
+/* Audio IN S/PDIF Channel Status Register 4 */
+#define SP_FS_FREQ_MASK			0x0f
+#  define SP_FS_FREQ_44100HZ		0x00
+#  define SP_FS_FREQ_48000HZ		0x02
+#  define SP_FS_FREQ_32000HZ		0x03
+#  define SP_FS_FREQ_88200HZ		0x08
+#  define SP_FS_FREQ_96000HZ		0x0a
+#  define SP_FS_FREQ_176400HZ		0x0c
+#  define SP_FS_FREQ_192000HZ		0x0e
+
+/*
+ * Micellaneous Control Block
+ */
+
+/* CHIP Control Register */
+#define SP_CHIP_CTRL_REG		0xe3
+#define SP_MAN_HDMI5V_DET		BIT(3)
+#define SP_PLLLOCK_CKDT_EN		BIT(2)
+#define SP_ANALOG_CKDT_EN		BIT(1)
+#define SP_DIGITAL_CKDT_EN		BIT(0)
+
+/* Packet Receiving Status Register */
+#define SP_PACKET_RECEIVING_STATUS_REG	0xf3
+#define SP_AVI_RCVD			BIT(5)
+#define SP_VSI_RCVD			BIT(1)
+
+/***************************************************************/
+/* Register definitions for RX_P1                              */
+/***************************************************************/
+
+/* HDCP BCAPS Shadow Register */
+#define SP_HDCP_BCAPS_SHADOW_REG	0x2a
+#define SP_BCAPS_REPEATER		BIT(5)
+
+/* HDCP Status Register */
+#define SP_RX_HDCP_STATUS_REG		0x3f
+#define SP_AUTH_EN			BIT(4)
+
+/*
+ * InfoFrame and Control Packet Registers
+ */
+
+/* AVI InfoFrame packet checksum */
+#define SP_AVI_INFOFRAME_CHECKSUM	0xa3
+
+/* AVI InfoFrame Registers */
+#define SP_AVI_INFOFRAME_DATA_BASE	0xa4
+
+#define SP_AVI_COLOR_F_MASK		0x60
+#define SP_AVI_COLOR_F_SHIFT		5
+
+/* Audio InfoFrame Registers */
+#define SP_AUD_INFOFRAME_DATA_BASE	0xc4
+#define SP_AUD_INFOFRAME_LAYOUT_MASK	0x0f
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */
+#define SP_MPEG_VS_INFOFRAME_TYPE_REG	0xe0
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet length */
+#define SP_MPEG_VS_INFOFRAME_LEN_REG	0xe2
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */
+#define SP_MPEG_VS_INFOFRAME_VER_REG	0xe1
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet content */
+#define SP_MPEG_VS_INFOFRAME_DATA_BASE	0xe4
+
+/* General Control Packet Register */
+#define SP_GENERAL_CTRL_PACKET_REG	0x9f
+#define SP_CLEAR_AVMUTE			BIT(4)
+#define SP_SET_AVMUTE			BIT(0)
+
+/***************************************************************/
+/* Register definitions for TX_P1                              */
+/***************************************************************/
+
+/* DP TX Link Training Control Register */
+#define SP_DP_TX_LT_CTRL0_REG		0x30
+
+/* PD 1.2 Lint Training 80bit Pattern Register */
+#define SP_DP_LT_80BIT_PATTERN0_REG	0x80
+#define SP_DP_LT_80BIT_PATTERN_REG_NUM	10
+
+/* Audio Interface Control Register 0 */
+#define SP_AUD_INTERFACE_CTRL0_REG	0x5f
+#define SP_AUD_INTERFACE_DISABLE	0x80
+
+/* Audio Interface Control Register 2 */
+#define SP_AUD_INTERFACE_CTRL2_REG	0x60
+#define SP_M_AUD_ADJUST_ST		0x04
+
+/* Audio Interface Control Register 3 */
+#define SP_AUD_INTERFACE_CTRL3_REG	0x62
+
+/* Audio Interface Control Register 4 */
+#define SP_AUD_INTERFACE_CTRL4_REG	0x67
+
+/* Audio Interface Control Register 5 */
+#define SP_AUD_INTERFACE_CTRL5_REG	0x68
+
+/* Audio Interface Control Register 6 */
+#define SP_AUD_INTERFACE_CTRL6_REG	0x69
+
+/* Firmware Version Register */
+#define SP_FW_VER_REG			0xb7
+
+#endif
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
new file mode 100644
index 000000000..fe40bab21
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ */
+#include <linux/regmap.h>
+
+#include <drm/drm.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_print.h>
+
+#include "analogix-i2c-dptx.h"
+
+#define AUX_WAIT_TIMEOUT_MS	15
+#define AUX_CH_BUFFER_SIZE	16
+
+static int anx_i2c_dp_clear_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, 0);
+}
+
+static bool anx_dp_aux_op_finished(struct regmap *map_dptx)
+{
+	unsigned int value;
+	int err;
+
+	err = regmap_read(map_dptx, SP_DP_AUX_CH_CTRL2_REG, &value);
+	if (err < 0)
+		return false;
+
+	return (value & SP_AUX_EN) == 0;
+}
+
+static int anx_dp_aux_wait(struct regmap *map_dptx)
+{
+	unsigned long timeout;
+	unsigned int status;
+	int err;
+
+	timeout = jiffies + msecs_to_jiffies(AUX_WAIT_TIMEOUT_MS) + 1;
+
+	while (!anx_dp_aux_op_finished(map_dptx)) {
+		if (time_after(jiffies, timeout)) {
+			if (!anx_dp_aux_op_finished(map_dptx)) {
+				DRM_ERROR("Timed out waiting AUX to finish\n");
+				return -ETIMEDOUT;
+			}
+
+			break;
+		}
+
+		usleep_range(1000, 2000);
+	}
+
+	/* Read the AUX channel access status */
+	err = regmap_read(map_dptx, SP_AUX_CH_STATUS_REG, &status);
+	if (err < 0) {
+		DRM_ERROR("Failed to read from AUX channel: %d\n", err);
+		return err;
+	}
+
+	if (status & SP_AUX_STATUS) {
+		DRM_ERROR("Failed to wait for AUX channel (status: %02x)\n",
+			  status);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int anx_dp_aux_address(struct regmap *map_dptx, unsigned int addr)
+{
+	int err;
+
+	err = regmap_write(map_dptx, SP_AUX_ADDR_7_0_REG, addr & 0xff);
+	if (err)
+		return err;
+
+	err = regmap_write(map_dptx, SP_AUX_ADDR_15_8_REG,
+			   (addr & 0xff00) >> 8);
+	if (err)
+		return err;
+
+	/*
+	 * DP AUX CH Address Register #2, only update bits[3:0]
+	 * [7:4] RESERVED
+	 * [3:0] AUX_ADDR[19:16], Register control AUX CH address.
+	 */
+	err = regmap_update_bits(map_dptx, SP_AUX_ADDR_19_16_REG,
+				 SP_AUX_ADDR_19_16_MASK,
+				 (addr & 0xf0000) >> 16);
+
+	if (err)
+		return err;
+
+	return 0;
+}
+
+ssize_t anx_dp_aux_transfer(struct regmap *map_dptx,
+				struct drm_dp_aux_msg *msg)
+{
+	u8 ctrl1 = msg->request;
+	u8 ctrl2 = SP_AUX_EN;
+	u8 *buffer = msg->buffer;
+	int err;
+
+	/* The DP AUX transmit and receive buffer has 16 bytes. */
+	if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE))
+		return -E2BIG;
+
+	/* Zero-sized messages specify address-only transactions. */
+	if (msg->size < 1)
+		ctrl2 |= SP_ADDR_ONLY;
+	else	/* For non-zero-sized set the length field. */
+		ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
+
+	if ((msg->size > 0) && ((msg->request & DP_AUX_I2C_READ) == 0)) {
+		/* When WRITE | MOT write values to data buffer */
+		err = regmap_bulk_write(map_dptx,
+					SP_DP_BUF_DATA0_REG, buffer,
+					msg->size);
+		if (err)
+			return err;
+	}
+
+	/* Write address and request */
+	err = anx_dp_aux_address(map_dptx, msg->address);
+	if (err)
+		return err;
+
+	err = regmap_write(map_dptx, SP_DP_AUX_CH_CTRL1_REG, ctrl1);
+	if (err)
+		return err;
+
+	/* Start transaction */
+	err = regmap_update_bits(map_dptx, SP_DP_AUX_CH_CTRL2_REG,
+				 SP_ADDR_ONLY | SP_AUX_EN, ctrl2);
+	if (err)
+		return err;
+
+	err = anx_dp_aux_wait(map_dptx);
+	if (err)
+		return err;
+
+	msg->reply = DP_AUX_I2C_REPLY_ACK;
+
+	if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) {
+		/* Read values from data buffer */
+		err = regmap_bulk_read(map_dptx,
+				       SP_DP_BUF_DATA0_REG, buffer,
+				       msg->size);
+		if (err)
+			return err;
+	}
+
+	err = anx_i2c_dp_clear_bits(map_dptx, SP_DP_AUX_CH_CTRL2_REG,
+				    SP_ADDR_ONLY);
+	if (err)
+		return err;
+
+	return msg->size;
+}
+EXPORT_SYMBOL_GPL(anx_dp_aux_transfer);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
new file mode 100644
index 000000000..663c4bea6
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ */
+#ifndef _ANALOGIX_I2C_DPTX_H_
+#define _ANALOGIX_I2C_DPTX_H_
+
+/***************************************************************/
+/* Register definitions for TX_P0                              */
+/***************************************************************/
+
+/* HDCP Status Register */
+#define SP_TX_HDCP_STATUS_REG		0x00
+#define SP_AUTH_FAIL			BIT(5)
+#define SP_AUTHEN_PASS			BIT(1)
+
+/* HDCP Control Register 0 */
+#define SP_HDCP_CTRL0_REG		0x01
+#define SP_RX_REPEATER			BIT(6)
+#define SP_RE_AUTH			BIT(5)
+#define SP_SW_AUTH_OK			BIT(4)
+#define SP_HARD_AUTH_EN			BIT(3)
+#define SP_HDCP_ENC_EN			BIT(2)
+#define SP_BKSV_SRM_PASS		BIT(1)
+#define SP_KSVLIST_VLD			BIT(0)
+/* HDCP Function Enabled */
+#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+/* HDCP Receiver BSTATUS Register 0 */
+#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
+/* HDCP Receiver BSTATUS Register 1 */
+#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
+
+/* HDCP Embedded "Blue Screen" Content Registers */
+#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
+#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
+#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
+
+/* HDCP Wait R0 Timing Register */
+#define SP_HDCP_WAIT_R0_TIME_REG	0x40
+
+/* HDCP Link Integrity Check Timer Register */
+#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
+
+/* HDCP Repeater Ready Wait Timer Register */
+#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
+
+/* HDCP Auto Timer Register */
+#define SP_HDCP_AUTO_TIMER_REG		0x51
+
+/* HDCP Key Status Register */
+#define SP_HDCP_KEY_STATUS_REG		0x5e
+
+/* HDCP Key Command Register */
+#define SP_HDCP_KEY_COMMAND_REG		0x5f
+#define SP_DISABLE_SYNC_HDCP		BIT(2)
+
+/* OTP Memory Key Protection Registers */
+#define SP_OTP_KEY_PROTECT1_REG		0x60
+#define SP_OTP_KEY_PROTECT2_REG		0x61
+#define SP_OTP_KEY_PROTECT3_REG		0x62
+#define SP_OTP_PSW1			0xa2
+#define SP_OTP_PSW2			0x7e
+#define SP_OTP_PSW3			0xc6
+
+/* DP System Control Registers */
+#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
+/* Bits for DP System Control Register 2 */
+#define SP_CHA_STA			BIT(2)
+/* Bits for DP System Control Register 3 */
+#define SP_HPD_STATUS			BIT(6)
+#define SP_HPD_FORCE			BIT(5)
+#define SP_HPD_CTRL			BIT(4)
+#define SP_STRM_VALID			BIT(2)
+#define SP_STRM_FORCE			BIT(1)
+#define SP_STRM_CTRL			BIT(0)
+/* Bits for DP System Control Register 4 */
+#define SP_ENHANCED_MODE		BIT(3)
+
+/* DP Video Control Register */
+#define SP_DP_VIDEO_CTRL_REG		0x84
+#define SP_COLOR_F_MASK			0x06
+#define SP_COLOR_F_SHIFT		1
+#define SP_BPC_MASK			0xe0
+#define SP_BPC_SHIFT			5
+#  define SP_BPC_6BITS			0x00
+#  define SP_BPC_8BITS			0x01
+#  define SP_BPC_10BITS			0x02
+#  define SP_BPC_12BITS			0x03
+
+/* DP Audio Control Register */
+#define SP_DP_AUDIO_CTRL_REG		0x87
+#define SP_AUD_EN			BIT(0)
+
+/* 10us Pulse Generate Timer Registers */
+#define SP_I2C_GEN_10US_TIMER0_REG	0x88
+#define SP_I2C_GEN_10US_TIMER1_REG	0x89
+
+/* Packet Send Control Register */
+#define SP_PACKET_SEND_CTRL_REG		0x90
+#define SP_AUD_IF_UP			BIT(7)
+#define SP_AVI_IF_UD			BIT(6)
+#define SP_MPEG_IF_UD			BIT(5)
+#define SP_SPD_IF_UD			BIT(4)
+#define SP_AUD_IF_EN			BIT(3)
+#define SP_AVI_IF_EN			BIT(2)
+#define SP_MPEG_IF_EN			BIT(1)
+#define SP_SPD_IF_EN			BIT(0)
+
+/* DP HDCP Control Register */
+#define SP_DP_HDCP_CTRL_REG		0x92
+#define SP_AUTO_EN			BIT(7)
+#define SP_AUTO_START			BIT(5)
+#define SP_LINK_POLLING			BIT(1)
+
+/* DP Main Link Bandwidth Setting Register */
+#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
+#define SP_LINK_BW_SET_MASK		0x1f
+#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
+
+/* DP Lane Count Setting Register */
+#define SP_DP_LANE_COUNT_SET_REG	0xa1
+
+/* DP Training Pattern Set Register */
+#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
+
+/* DP Lane 0 Link Training Control Register */
+#define SP_DP_LANE0_LT_CTRL_REG		0xa3
+#define SP_TX_SW_SET_MASK		0x1b
+#define SP_MAX_PRE_REACH		BIT(5)
+#define SP_MAX_DRIVE_REACH		BIT(4)
+#define SP_PRE_EMP_LEVEL1		BIT(3)
+#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
+
+/* DP Link Training Control Register */
+#define SP_DP_LT_CTRL_REG		0xa8
+#define SP_DP_LT_INPROGRESS		0x80
+#define SP_LT_ERROR_TYPE_MASK		0x70
+#  define SP_LT_NO_ERROR		0x00
+#  define SP_LT_AUX_WRITE_ERROR		0x01
+#  define SP_LT_MAX_DRIVE_REACHED	0x02
+#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
+#  define SP_LT_LOOP_SAME_5_TIME	0x04
+#  define SP_LT_CR_FAIL_IN_EQ		0x05
+#  define SP_LT_EQ_LOOP_5_TIME		0x06
+#define SP_LT_EN			BIT(0)
+
+/* DP CEP Training Control Registers */
+#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
+#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
+
+/* DP Debug Register 1 */
+#define SP_DP_DEBUG1_REG		0xb0
+#define SP_DEBUG_PLL_LOCK		BIT(4)
+#define SP_POLLING_EN			BIT(1)
+
+/* DP Polling Control Register */
+#define SP_DP_POLLING_CTRL_REG		0xb4
+#define SP_AUTO_POLLING_DISABLE		BIT(0)
+
+/* DP Link Debug Control Register */
+#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
+#define SP_M_VID_DEBUG			BIT(5)
+#define SP_NEW_PRBS7			BIT(4)
+#define SP_INSERT_ER			BIT(1)
+#define SP_PRBS31_EN			BIT(0)
+
+/* AUX Misc control Register */
+#define SP_AUX_MISC_CTRL_REG		0xbf
+
+/* DP PLL control Register */
+#define SP_DP_PLL_CTRL_REG		0xc7
+#define SP_PLL_RST			BIT(6)
+
+/* DP Analog Power Down Register */
+#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
+#define SP_CH0_PD			BIT(0)
+
+/* DP Misc Control Register */
+#define SP_DP_MISC_CTRL_REG		0xcd
+#define SP_EQ_TRAINING_LOOP		BIT(6)
+
+/* DP Extra I2C Device Address Register */
+#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
+#define SP_I2C_STRETCH_DISABLE		BIT(7)
+
+#define SP_I2C_EXTRA_ADDR		0x50
+
+/* DP Downspread Control Register 1 */
+#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
+
+/* DP M Value Calculation Control Register */
+#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
+#define SP_M_GEN_CLK_SEL		BIT(0)
+
+/* AUX Channel Access Status Register */
+#define SP_AUX_CH_STATUS_REG		0xe0
+#define SP_AUX_STATUS			0x0f
+
+/* AUX Channel DEFER Control Register */
+#define SP_AUX_DEFER_CTRL_REG		0xe2
+#define SP_DEFER_CTRL_EN		BIT(7)
+
+/* DP Buffer Data Count Register */
+#define SP_BUF_DATA_COUNT_REG		0xe4
+#define SP_BUF_DATA_COUNT_MASK		0x1f
+#define SP_BUF_CLR			BIT(7)
+
+/* DP AUX Channel Control Register 1 */
+#define SP_DP_AUX_CH_CTRL1_REG		0xe5
+#define SP_AUX_TX_COMM_MASK		0x0f
+#define SP_AUX_LENGTH_MASK		0xf0
+#define SP_AUX_LENGTH_SHIFT		4
+
+/* DP AUX CH Address Register 0 */
+#define SP_AUX_ADDR_7_0_REG		0xe6
+
+/* DP AUX CH Address Register 1 */
+#define SP_AUX_ADDR_15_8_REG		0xe7
+
+/* DP AUX CH Address Register 2 */
+#define SP_AUX_ADDR_19_16_REG		0xe8
+#define SP_AUX_ADDR_19_16_MASK		0x0f
+
+/* DP AUX Channel Control Register 2 */
+#define SP_DP_AUX_CH_CTRL2_REG		0xe9
+#define SP_AUX_SEL_RXCM			BIT(6)
+#define SP_AUX_CHSEL			BIT(3)
+#define SP_AUX_PN_INV			BIT(2)
+#define SP_ADDR_ONLY			BIT(1)
+#define SP_AUX_EN			BIT(0)
+
+/* DP Video Stream Control InfoFrame Register */
+#define SP_DP_3D_VSC_CTRL_REG		0xea
+#define SP_INFO_FRAME_VSC_EN		BIT(0)
+
+/* DP Video Stream Data Byte 1 Register */
+#define SP_DP_VSC_DB1_REG		0xeb
+
+/* DP AUX Channel Control Register 3 */
+#define SP_DP_AUX_CH_CTRL3_REG		0xec
+#define SP_WAIT_COUNTER_7_0_MASK	0xff
+
+/* DP AUX Channel Control Register 4 */
+#define SP_DP_AUX_CH_CTRL4_REG		0xed
+
+/* DP AUX Buffer Data Registers */
+#define SP_DP_BUF_DATA0_REG		0xf0
+
+ssize_t anx_dp_aux_transfer(struct regmap *map_dptx,
+				struct drm_dp_aux_msg *msg);
+
+#endif
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
new file mode 100644
index 000000000..3c843497d
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
@@ -0,0 +1,234 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ */
+#ifndef _ANALOGIX_I2C_TXCOMMON_H_
+#define _ANALOGIX_I2C_TXCOMMON_H_
+
+/***************************************************************/
+/* Register definitions for TX_P2                              */
+/***************************************************************/
+
+/*
+ * Core Register Definitions
+ */
+
+/* Device ID Low Byte Register */
+#define SP_DEVICE_IDL_REG		0x02
+
+/* Device ID High Byte Register */
+#define SP_DEVICE_IDH_REG		0x03
+
+/* Device version register */
+#define SP_DEVICE_VERSION_REG		0x04
+
+/* Power Down Control Register */
+#define SP_POWERDOWN_CTRL_REG		0x05
+#define SP_REGISTER_PD			BIT(7)
+#define SP_HDCP_PD			BIT(5)
+#define SP_AUDIO_PD			BIT(4)
+#define SP_VIDEO_PD			BIT(3)
+#define SP_LINK_PD			BIT(2)
+#define SP_TOTAL_PD			BIT(1)
+
+/* Reset Control Register 1 */
+#define SP_RESET_CTRL1_REG		0x06
+#define SP_MISC_RST			BIT(7)
+#define SP_VIDCAP_RST			BIT(6)
+#define SP_VIDFIF_RST			BIT(5)
+#define SP_AUDFIF_RST			BIT(4)
+#define SP_AUDCAP_RST			BIT(3)
+#define SP_HDCP_RST			BIT(2)
+#define SP_SW_RST			BIT(1)
+#define SP_HW_RST			BIT(0)
+
+/* Reset Control Register 2 */
+#define SP_RESET_CTRL2_REG		0x07
+#define SP_AUX_RST			BIT(2)
+#define SP_SERDES_FIFO_RST		BIT(1)
+#define SP_I2C_REG_RST			BIT(0)
+
+/* Video Control Register 1 */
+#define SP_VID_CTRL1_REG		0x08
+#define SP_VIDEO_EN			BIT(7)
+#define SP_VIDEO_MUTE			BIT(2)
+#define SP_DE_GEN			BIT(1)
+#define SP_DEMUX			BIT(0)
+
+/* Video Control Register 2 */
+#define SP_VID_CTRL2_REG		0x09
+#define SP_IN_COLOR_F_MASK		0x03
+#define SP_IN_YC_BIT_SEL		BIT(2)
+#define SP_IN_BPC_MASK			0x70
+#define SP_IN_BPC_SHIFT			4
+#  define SP_IN_BPC_12BIT		0x03
+#  define SP_IN_BPC_10BIT		0x02
+#  define SP_IN_BPC_8BIT		0x01
+#  define SP_IN_BPC_6BIT		0x00
+#define SP_IN_D_RANGE			BIT(7)
+
+/* Video Control Register 3 */
+#define SP_VID_CTRL3_REG		0x0a
+#define SP_HPD_OUT			BIT(6)
+
+/* Video Control Register 5 */
+#define SP_VID_CTRL5_REG		0x0c
+#define SP_CSC_STD_SEL			BIT(7)
+#define SP_XVYCC_RNG_LMT		BIT(6)
+#define SP_RANGE_Y2R			BIT(5)
+#define SP_CSPACE_Y2R			BIT(4)
+#define SP_RGB_RNG_LMT			BIT(3)
+#define SP_Y_RNG_LMT			BIT(2)
+#define SP_RANGE_R2Y			BIT(1)
+#define SP_CSPACE_R2Y			BIT(0)
+
+/* Video Control Register 6 */
+#define SP_VID_CTRL6_REG		0x0d
+#define SP_TEST_PATTERN_EN		BIT(7)
+#define SP_VIDEO_PROCESS_EN		BIT(6)
+#define SP_VID_US_MODE			BIT(3)
+#define SP_VID_DS_MODE			BIT(2)
+#define SP_UP_SAMPLE			BIT(1)
+#define SP_DOWN_SAMPLE			BIT(0)
+
+/* Video Control Register 8 */
+#define SP_VID_CTRL8_REG		0x0f
+#define SP_VID_VRES_TH			BIT(0)
+
+/* Total Line Status Low Byte Register */
+#define SP_TOTAL_LINE_STAL_REG		0x24
+
+/* Total Line Status High Byte Register */
+#define SP_TOTAL_LINE_STAH_REG		0x25
+
+/* Active Line Status Low Byte Register */
+#define SP_ACT_LINE_STAL_REG		0x26
+
+/* Active Line Status High Byte Register */
+#define SP_ACT_LINE_STAH_REG		0x27
+
+/* Vertical Front Porch Status Register */
+#define SP_V_F_PORCH_STA_REG		0x28
+
+/* Vertical SYNC Width Status Register */
+#define SP_V_SYNC_STA_REG		0x29
+
+/* Vertical Back Porch Status Register */
+#define SP_V_B_PORCH_STA_REG		0x2a
+
+/* Total Pixel Status Low Byte Register */
+#define SP_TOTAL_PIXEL_STAL_REG		0x2b
+
+/* Total Pixel Status High Byte Register */
+#define SP_TOTAL_PIXEL_STAH_REG		0x2c
+
+/* Active Pixel Status Low Byte Register */
+#define SP_ACT_PIXEL_STAL_REG		0x2d
+
+/* Active Pixel Status High Byte Register */
+#define SP_ACT_PIXEL_STAH_REG		0x2e
+
+/* Horizontal Front Porch Status Low Byte Register */
+#define SP_H_F_PORCH_STAL_REG		0x2f
+
+/* Horizontal Front Porch Statys High Byte Register */
+#define SP_H_F_PORCH_STAH_REG		0x30
+
+/* Horizontal SYNC Width Status Low Byte Register */
+#define SP_H_SYNC_STAL_REG		0x31
+
+/* Horizontal SYNC Width Status High Byte Register */
+#define SP_H_SYNC_STAH_REG		0x32
+
+/* Horizontal Back Porch Status Low Byte Register */
+#define SP_H_B_PORCH_STAL_REG		0x33
+
+/* Horizontal Back Porch Status High Byte Register */
+#define SP_H_B_PORCH_STAH_REG		0x34
+
+/* InfoFrame AVI Packet DB1 Register */
+#define SP_INFOFRAME_AVI_DB1_REG	0x70
+
+/* Bit Control Specific Register */
+#define SP_BIT_CTRL_SPECIFIC_REG	0x80
+#define SP_BIT_CTRL_SELECT_SHIFT	1
+#define SP_ENABLE_BIT_CTRL		BIT(0)
+
+/* InfoFrame Audio Packet DB1 Register */
+#define SP_INFOFRAME_AUD_DB1_REG	0x83
+
+/* InfoFrame MPEG Packet DB1 Register */
+#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
+
+/* Audio Channel Status Registers */
+#define SP_AUD_CH_STATUS_BASE		0xd0
+
+/* Audio Channel Num Register 5 */
+#define SP_I2S_CHANNEL_NUM_MASK		0xe0
+#  define SP_I2S_CH_NUM_1		(0x00 << 5)
+#  define SP_I2S_CH_NUM_2		(0x01 << 5)
+#  define SP_I2S_CH_NUM_3		(0x02 << 5)
+#  define SP_I2S_CH_NUM_4		(0x03 << 5)
+#  define SP_I2S_CH_NUM_5		(0x04 << 5)
+#  define SP_I2S_CH_NUM_6		(0x05 << 5)
+#  define SP_I2S_CH_NUM_7		(0x06 << 5)
+#  define SP_I2S_CH_NUM_8		(0x07 << 5)
+#define SP_EXT_VUCP			BIT(2)
+#define SP_VBIT				BIT(1)
+#define SP_AUDIO_LAYOUT			BIT(0)
+
+/* Analog Debug Register 1 */
+#define SP_ANALOG_DEBUG1_REG		0xdc
+
+/* Analog Debug Register 2 */
+#define SP_ANALOG_DEBUG2_REG		0xdd
+#define SP_FORCE_SW_OFF_BYPASS		0x20
+#define SP_XTAL_FRQ			0x1c
+#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
+#  define SP_XTAL_FRQ_24M		(0x01 << 2)
+#  define SP_XTAL_FRQ_25M		(0x02 << 2)
+#  define SP_XTAL_FRQ_26M		(0x03 << 2)
+#  define SP_XTAL_FRQ_27M		(0x04 << 2)
+#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
+#  define SP_XTAL_FRQ_52M		(0x06 << 2)
+#define SP_POWERON_TIME_1P5MS		0x03
+
+/* Analog Control 0 Register */
+#define SP_ANALOG_CTRL0_REG		0xe1
+
+/* Common Interrupt Status Register 1 */
+#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
+#define SP_PLL_LOCK_CHG			0x40
+
+/* Common Interrupt Status Register 2 */
+#define SP_COMMON_INT_STATUS2		0xf2
+#define SP_HDCP_AUTH_CHG		BIT(1)
+#define SP_HDCP_AUTH_DONE		BIT(0)
+
+#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
+
+/* Common Interrupt Status Register 4 */
+#define SP_COMMON_INT_STATUS4_REG	0xf4
+#define SP_HPD_IRQ			BIT(6)
+#define SP_HPD_ESYNC_ERR		BIT(4)
+#define SP_HPD_CHG			BIT(2)
+#define SP_HPD_LOST			BIT(1)
+#define SP_HPD_PLUG			BIT(0)
+
+/* DP Interrupt Status Register */
+#define SP_DP_INT_STATUS1_REG		0xf7
+#define SP_TRAINING_FINISH		BIT(5)
+#define SP_POLLING_ERR			BIT(4)
+
+/* Common Interrupt Mask Register */
+#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
+
+#define SP_COMMON_INT_MASK4_REG		0xfb
+
+/* DP Interrupts Mask Register */
+#define SP_DP_INT_MASK1_REG		0xfe
+
+/* Interrupt Control Register */
+#define SP_INT_CTRL_REG			0xff
+
+#endif /* _ANALOGIX_I2C_TXCOMMON_H_ */
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
new file mode 100644
index 000000000..e8baa0745
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -0,0 +1,1911 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+* Analogix DP (Display Port) core interface driver.
+*
+* Copyright (C) 2012 Samsung Electronics Co., Ltd.
+* Author: Jingoo Han <jg1.han@samsung.com>
+*/
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#include <drm/bridge/analogix_dp.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include "analogix_dp_core.h"
+#include "analogix_dp_reg.h"
+
+#define to_dp(nm)	container_of(nm, struct analogix_dp_device, nm)
+
+static const bool verify_fast_training;
+
+struct bridge_init {
+	struct i2c_client *client;
+	struct device_node *node;
+};
+
+static int analogix_dp_init_dp(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	analogix_dp_reset(dp);
+
+	analogix_dp_swreset(dp);
+
+	analogix_dp_init_analog_param(dp);
+	analogix_dp_init_interrupt(dp);
+
+	/* SW defined function Normal operation */
+	analogix_dp_enable_sw_function(dp);
+
+	analogix_dp_config_interrupt(dp);
+	ret = analogix_dp_init_analog_func(dp);
+	if (ret)
+		return ret;
+
+	analogix_dp_init_hpd(dp);
+	analogix_dp_init_aux(dp);
+	return 0;
+}
+
+static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
+{
+	int timeout_loop = 0;
+
+	while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+		if (analogix_dp_get_plug_in_status(dp) == 0)
+			return 0;
+
+		timeout_loop++;
+		usleep_range(1000, 1100);
+	}
+
+	/*
+	 * Some edp screen do not have hpd signal, so we can't just
+	 * return failed when hpd plug in detect failed, DT property
+	 * "force-hpd" would indicate whether driver need this.
+	 */
+	if (!dp->force_hpd)
+		return -ETIMEDOUT;
+
+	/*
+	 * The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+	 * will not work, so we need to give a force hpd action to
+	 * set HPD_STATUS manually.
+	 */
+	dev_dbg(dp->dev, "failed to get hpd plug status, try to force hpd\n");
+
+	analogix_dp_force_hpd(dp);
+
+	if (analogix_dp_get_plug_in_status(dp) != 0) {
+		dev_err(dp->dev, "failed to get hpd plug in status\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dp->dev, "success to get plug in status after force hpd\n");
+
+	return 0;
+}
+
+static bool analogix_dp_detect_sink_psr(struct analogix_dp_device *dp)
+{
+	unsigned char psr_version;
+	int ret;
+
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_PSR_SUPPORT, &psr_version);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to get PSR version, disable it\n");
+		return false;
+	}
+
+	dev_dbg(dp->dev, "Panel PSR version : %x\n", psr_version);
+	return psr_version & DP_PSR_IS_SUPPORTED;
+}
+
+static int analogix_dp_enable_sink_psr(struct analogix_dp_device *dp)
+{
+	unsigned char psr_en;
+	int ret;
+
+	/* Disable psr function */
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_PSR_EN_CFG, &psr_en);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to get psr config\n");
+		goto end;
+	}
+
+	psr_en &= ~DP_PSR_ENABLE;
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to disable panel psr\n");
+		goto end;
+	}
+
+	/* Main-Link transmitter remains active during PSR active states */
+	psr_en = DP_PSR_CRC_VERIFICATION;
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to set panel psr\n");
+		goto end;
+	}
+
+	/* Enable psr function */
+	psr_en = DP_PSR_ENABLE | DP_PSR_CRC_VERIFICATION;
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to set panel psr\n");
+		goto end;
+	}
+
+	analogix_dp_enable_psr_crc(dp);
+
+	dp->psr_supported = true;
+
+	return 0;
+end:
+	dev_err(dp->dev, "enable psr fail, force to disable psr\n");
+
+	return ret;
+}
+
+static int
+analogix_dp_enable_rx_to_enhanced_mode(struct analogix_dp_device *dp,
+				       bool enable)
+{
+	u8 data;
+	int ret;
+
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_LANE_COUNT_SET, &data);
+	if (ret != 1)
+		return ret;
+
+	if (enable)
+		ret = drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET,
+					 DP_LANE_COUNT_ENHANCED_FRAME_EN |
+					 DPCD_LANE_COUNT_SET(data));
+	else
+		ret = drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET,
+					 DPCD_LANE_COUNT_SET(data));
+
+	return ret < 0 ? ret : 0;
+}
+
+static int analogix_dp_is_enhanced_mode_available(struct analogix_dp_device *dp,
+						  u8 *enhanced_mode_support)
+{
+	u8 data;
+	int ret;
+
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_MAX_LANE_COUNT, &data);
+	if (ret != 1) {
+		*enhanced_mode_support = 0;
+		return ret;
+	}
+
+	*enhanced_mode_support = DPCD_ENHANCED_FRAME_CAP(data);
+
+	return 0;
+}
+
+static int analogix_dp_set_enhanced_mode(struct analogix_dp_device *dp)
+{
+	u8 data;
+	int ret;
+
+	ret = analogix_dp_is_enhanced_mode_available(dp, &data);
+	if (ret < 0)
+		return ret;
+
+	ret = analogix_dp_enable_rx_to_enhanced_mode(dp, data);
+	if (ret < 0)
+		return ret;
+
+	analogix_dp_enable_enhanced_mode(dp, data);
+
+	return 0;
+}
+
+static int analogix_dp_training_pattern_dis(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	analogix_dp_set_training_pattern(dp, DP_NONE);
+
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				 DP_TRAINING_PATTERN_DISABLE);
+
+	return ret < 0 ? ret : 0;
+}
+
+static void
+analogix_dp_set_lane_lane_pre_emphasis(struct analogix_dp_device *dp,
+				       int pre_emphasis, int lane)
+{
+	switch (lane) {
+	case 0:
+		analogix_dp_set_lane0_pre_emphasis(dp, pre_emphasis);
+		break;
+	case 1:
+		analogix_dp_set_lane1_pre_emphasis(dp, pre_emphasis);
+		break;
+
+	case 2:
+		analogix_dp_set_lane2_pre_emphasis(dp, pre_emphasis);
+		break;
+
+	case 3:
+		analogix_dp_set_lane3_pre_emphasis(dp, pre_emphasis);
+		break;
+	}
+}
+
+static int analogix_dp_link_start(struct analogix_dp_device *dp)
+{
+	u8 buf[4];
+	int lane, lane_count, pll_tries, retval;
+
+	lane_count = dp->link_train.lane_count;
+
+	dp->link_train.lt_state = CLOCK_RECOVERY;
+	dp->link_train.eq_loop = 0;
+
+	for (lane = 0; lane < lane_count; lane++)
+		dp->link_train.cr_loop[lane] = 0;
+
+	/* Set link rate and count as you want to establish*/
+	analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
+	analogix_dp_set_lane_count(dp, dp->link_train.lane_count);
+
+	/* Setup RX configuration */
+	buf[0] = dp->link_train.link_rate;
+	buf[1] = dp->link_train.lane_count;
+	retval = drm_dp_dpcd_write(&dp->aux, DP_LINK_BW_SET, buf, 2);
+	if (retval < 0)
+		return retval;
+	/* set enhanced mode if available */
+	retval = analogix_dp_set_enhanced_mode(dp);
+	if (retval < 0) {
+		dev_err(dp->dev, "failed to set enhance mode\n");
+		return retval;
+	}
+
+	/* Set TX pre-emphasis to minimum */
+	for (lane = 0; lane < lane_count; lane++)
+		analogix_dp_set_lane_lane_pre_emphasis(dp,
+			PRE_EMPHASIS_LEVEL_0, lane);
+
+	/* Wait for PLL lock */
+	pll_tries = 0;
+	while (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+		if (pll_tries == DP_TIMEOUT_LOOP_COUNT) {
+			dev_err(dp->dev, "Wait for PLL lock timed out\n");
+			return -ETIMEDOUT;
+		}
+
+		pll_tries++;
+		usleep_range(90, 120);
+	}
+
+	/* Set training pattern 1 */
+	analogix_dp_set_training_pattern(dp, TRAINING_PTN1);
+
+	/* Set RX training pattern */
+	retval = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				    DP_LINK_SCRAMBLING_DISABLE |
+					DP_TRAINING_PATTERN_1);
+	if (retval < 0)
+		return retval;
+
+	for (lane = 0; lane < lane_count; lane++)
+		buf[lane] = DP_TRAIN_PRE_EMPH_LEVEL_0 |
+			    DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
+
+	retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, buf,
+				   lane_count);
+	if (retval < 0)
+		return retval;
+
+	return 0;
+}
+
+static unsigned char analogix_dp_get_lane_status(u8 link_status[2], int lane)
+{
+	int shift = (lane & 1) * 4;
+	u8 link_value = link_status[lane >> 1];
+
+	return (link_value >> shift) & 0xf;
+}
+
+static int analogix_dp_clock_recovery_ok(u8 link_status[2], int lane_count)
+{
+	int lane;
+	u8 lane_status;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = analogix_dp_get_lane_status(link_status, lane);
+		if ((lane_status & DP_LANE_CR_DONE) == 0)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static int analogix_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
+				     int lane_count)
+{
+	int lane;
+	u8 lane_status;
+
+	if ((link_align & DP_INTERLANE_ALIGN_DONE) == 0)
+		return -EINVAL;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = analogix_dp_get_lane_status(link_status, lane);
+		lane_status &= DP_CHANNEL_EQ_BITS;
+		if (lane_status != DP_CHANNEL_EQ_BITS)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static unsigned char
+analogix_dp_get_adjust_request_voltage(u8 adjust_request[2], int lane)
+{
+	int shift = (lane & 1) * 4;
+	u8 link_value = adjust_request[lane >> 1];
+
+	return (link_value >> shift) & 0x3;
+}
+
+static unsigned char analogix_dp_get_adjust_request_pre_emphasis(
+					u8 adjust_request[2],
+					int lane)
+{
+	int shift = (lane & 1) * 4;
+	u8 link_value = adjust_request[lane >> 1];
+
+	return ((link_value >> shift) & 0xc) >> 2;
+}
+
+static void analogix_dp_set_lane_link_training(struct analogix_dp_device *dp,
+					       u8 training_lane_set, int lane)
+{
+	switch (lane) {
+	case 0:
+		analogix_dp_set_lane0_link_training(dp, training_lane_set);
+		break;
+	case 1:
+		analogix_dp_set_lane1_link_training(dp, training_lane_set);
+		break;
+
+	case 2:
+		analogix_dp_set_lane2_link_training(dp, training_lane_set);
+		break;
+
+	case 3:
+		analogix_dp_set_lane3_link_training(dp, training_lane_set);
+		break;
+	}
+}
+
+static unsigned int
+analogix_dp_get_lane_link_training(struct analogix_dp_device *dp,
+				   int lane)
+{
+	u32 reg;
+
+	switch (lane) {
+	case 0:
+		reg = analogix_dp_get_lane0_link_training(dp);
+		break;
+	case 1:
+		reg = analogix_dp_get_lane1_link_training(dp);
+		break;
+	case 2:
+		reg = analogix_dp_get_lane2_link_training(dp);
+		break;
+	case 3:
+		reg = analogix_dp_get_lane3_link_training(dp);
+		break;
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+
+	return reg;
+}
+
+static void analogix_dp_reduce_link_rate(struct analogix_dp_device *dp)
+{
+	analogix_dp_training_pattern_dis(dp);
+	analogix_dp_set_enhanced_mode(dp);
+
+	dp->link_train.lt_state = FAILED;
+}
+
+static void analogix_dp_get_adjust_training_lane(struct analogix_dp_device *dp,
+						 u8 adjust_request[2])
+{
+	int lane, lane_count;
+	u8 voltage_swing, pre_emphasis, training_lane;
+
+	lane_count = dp->link_train.lane_count;
+	for (lane = 0; lane < lane_count; lane++) {
+		voltage_swing = analogix_dp_get_adjust_request_voltage(
+						adjust_request, lane);
+		pre_emphasis = analogix_dp_get_adjust_request_pre_emphasis(
+						adjust_request, lane);
+		training_lane = DPCD_VOLTAGE_SWING_SET(voltage_swing) |
+				DPCD_PRE_EMPHASIS_SET(pre_emphasis);
+
+		if (voltage_swing == VOLTAGE_LEVEL_3)
+			training_lane |= DP_TRAIN_MAX_SWING_REACHED;
+		if (pre_emphasis == PRE_EMPHASIS_LEVEL_3)
+			training_lane |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+		dp->link_train.training_lane[lane] = training_lane;
+	}
+}
+
+static int analogix_dp_process_clock_recovery(struct analogix_dp_device *dp)
+{
+	int lane, lane_count, retval;
+	u8 voltage_swing, pre_emphasis, training_lane;
+	u8 link_status[2], adjust_request[2];
+
+	usleep_range(100, 101);
+
+	lane_count = dp->link_train.lane_count;
+
+	retval = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, 2);
+	if (retval < 0)
+		return retval;
+
+	retval = drm_dp_dpcd_read(&dp->aux, DP_ADJUST_REQUEST_LANE0_1,
+				  adjust_request, 2);
+	if (retval < 0)
+		return retval;
+
+	if (analogix_dp_clock_recovery_ok(link_status, lane_count) == 0) {
+		/* set training pattern 2 for EQ */
+		analogix_dp_set_training_pattern(dp, TRAINING_PTN2);
+
+		retval = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+					    DP_LINK_SCRAMBLING_DISABLE |
+						DP_TRAINING_PATTERN_2);
+		if (retval < 0)
+			return retval;
+
+		dev_dbg(dp->dev, "Link Training Clock Recovery success\n");
+		dp->link_train.lt_state = EQUALIZER_TRAINING;
+	} else {
+		for (lane = 0; lane < lane_count; lane++) {
+			training_lane = analogix_dp_get_lane_link_training(
+							dp, lane);
+			voltage_swing = analogix_dp_get_adjust_request_voltage(
+							adjust_request, lane);
+			pre_emphasis = analogix_dp_get_adjust_request_pre_emphasis(
+							adjust_request, lane);
+
+			if (DPCD_VOLTAGE_SWING_GET(training_lane) ==
+					voltage_swing &&
+			    DPCD_PRE_EMPHASIS_GET(training_lane) ==
+					pre_emphasis)
+				dp->link_train.cr_loop[lane]++;
+
+			if (dp->link_train.cr_loop[lane] == MAX_CR_LOOP ||
+			    voltage_swing == VOLTAGE_LEVEL_3 ||
+			    pre_emphasis == PRE_EMPHASIS_LEVEL_3) {
+				dev_err(dp->dev, "CR Max reached (%d,%d,%d)\n",
+					dp->link_train.cr_loop[lane],
+					voltage_swing, pre_emphasis);
+				analogix_dp_reduce_link_rate(dp);
+				return -EIO;
+			}
+		}
+	}
+
+	analogix_dp_get_adjust_training_lane(dp, adjust_request);
+
+	for (lane = 0; lane < lane_count; lane++)
+		analogix_dp_set_lane_link_training(dp,
+			dp->link_train.training_lane[lane], lane);
+
+	retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET,
+				   dp->link_train.training_lane, lane_count);
+	if (retval < 0)
+		return retval;
+
+	return 0;
+}
+
+static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp)
+{
+	int lane, lane_count, retval;
+	u32 reg;
+	u8 link_align, link_status[2], adjust_request[2];
+
+	usleep_range(400, 401);
+
+	lane_count = dp->link_train.lane_count;
+
+	retval = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, 2);
+	if (retval < 0)
+		return retval;
+
+	if (analogix_dp_clock_recovery_ok(link_status, lane_count)) {
+		analogix_dp_reduce_link_rate(dp);
+		return -EIO;
+	}
+
+	retval = drm_dp_dpcd_read(&dp->aux, DP_ADJUST_REQUEST_LANE0_1,
+				  adjust_request, 2);
+	if (retval < 0)
+		return retval;
+
+	retval = drm_dp_dpcd_readb(&dp->aux, DP_LANE_ALIGN_STATUS_UPDATED,
+				   &link_align);
+	if (retval < 0)
+		return retval;
+
+	analogix_dp_get_adjust_training_lane(dp, adjust_request);
+
+	if (!analogix_dp_channel_eq_ok(link_status, link_align, lane_count)) {
+		/* traing pattern Set to Normal */
+		retval = analogix_dp_training_pattern_dis(dp);
+		if (retval < 0)
+			return retval;
+
+		dev_dbg(dp->dev, "Link Training success!\n");
+		analogix_dp_get_link_bandwidth(dp, &reg);
+		dp->link_train.link_rate = reg;
+		dev_dbg(dp->dev, "final bandwidth = %.2x\n",
+			dp->link_train.link_rate);
+
+		analogix_dp_get_lane_count(dp, &reg);
+		dp->link_train.lane_count = reg;
+		dev_dbg(dp->dev, "final lane count = %.2x\n",
+			dp->link_train.lane_count);
+
+		dp->link_train.lt_state = FINISHED;
+
+		return 0;
+	}
+
+	/* not all locked */
+	dp->link_train.eq_loop++;
+
+	if (dp->link_train.eq_loop > MAX_EQ_LOOP) {
+		dev_err(dp->dev, "EQ Max loop\n");
+		analogix_dp_reduce_link_rate(dp);
+		return -EIO;
+	}
+
+	for (lane = 0; lane < lane_count; lane++)
+		analogix_dp_set_lane_link_training(dp,
+			dp->link_train.training_lane[lane], lane);
+
+	retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET,
+				   dp->link_train.training_lane, lane_count);
+	if (retval < 0)
+		return retval;
+
+	return 0;
+}
+
+static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp,
+					     u8 *bandwidth)
+{
+	u8 data;
+
+	/*
+	 * For DP rev.1.1, Maximum link rate of Main Link lanes
+	 * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+	 * For DP rev.1.2, Maximum link rate of Main Link lanes
+	 * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
+	 */
+	drm_dp_dpcd_readb(&dp->aux, DP_MAX_LINK_RATE, &data);
+	*bandwidth = data;
+}
+
+static void analogix_dp_get_max_rx_lane_count(struct analogix_dp_device *dp,
+					      u8 *lane_count)
+{
+	u8 data;
+
+	/*
+	 * For DP rev.1.1, Maximum number of Main Link lanes
+	 * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes
+	 */
+	drm_dp_dpcd_readb(&dp->aux, DP_MAX_LANE_COUNT, &data);
+	*lane_count = DPCD_MAX_LANE_COUNT(data);
+}
+
+static int analogix_dp_full_link_train(struct analogix_dp_device *dp,
+				       u32 max_lanes, u32 max_rate)
+{
+	int retval = 0;
+	bool training_finished = false;
+
+	/*
+	 * MACRO_RST must be applied after the PLL_LOCK to avoid
+	 * the DP inter pair skew issue for at least 10 us
+	 */
+	analogix_dp_reset_macro(dp);
+
+	/* Initialize by reading RX's DPCD */
+	analogix_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
+	analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
+
+	if ((dp->link_train.link_rate != DP_LINK_BW_1_62) &&
+	    (dp->link_train.link_rate != DP_LINK_BW_2_7) &&
+	    (dp->link_train.link_rate != DP_LINK_BW_5_4)) {
+		dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
+			dp->link_train.link_rate);
+		dp->link_train.link_rate = DP_LINK_BW_1_62;
+	}
+
+	if (dp->link_train.lane_count == 0) {
+		dev_err(dp->dev, "Rx Max Lane count is abnormal :%x !\n",
+			dp->link_train.lane_count);
+		dp->link_train.lane_count = (u8)LANE_COUNT1;
+	}
+
+	/* Setup TX lane count & rate */
+	if (dp->link_train.lane_count > max_lanes)
+		dp->link_train.lane_count = max_lanes;
+	if (dp->link_train.link_rate > max_rate)
+		dp->link_train.link_rate = max_rate;
+
+	/* All DP analog module power up */
+	analogix_dp_set_analog_power_down(dp, POWER_ALL, 0);
+
+	dp->link_train.lt_state = START;
+
+	/* Process here */
+	while (!retval && !training_finished) {
+		switch (dp->link_train.lt_state) {
+		case START:
+			retval = analogix_dp_link_start(dp);
+			if (retval)
+				dev_err(dp->dev, "LT link start failed!\n");
+			break;
+		case CLOCK_RECOVERY:
+			retval = analogix_dp_process_clock_recovery(dp);
+			if (retval)
+				dev_err(dp->dev, "LT CR failed!\n");
+			break;
+		case EQUALIZER_TRAINING:
+			retval = analogix_dp_process_equalizer_training(dp);
+			if (retval)
+				dev_err(dp->dev, "LT EQ failed!\n");
+			break;
+		case FINISHED:
+			training_finished = 1;
+			break;
+		case FAILED:
+			return -EREMOTEIO;
+		}
+	}
+	if (retval)
+		dev_err(dp->dev, "eDP link training failed (%d)\n", retval);
+
+	return retval;
+}
+
+static int analogix_dp_fast_link_train(struct analogix_dp_device *dp)
+{
+	int i, ret;
+	u8 link_align, link_status[2];
+	enum pll_status status;
+
+	analogix_dp_reset_macro(dp);
+
+	analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
+	analogix_dp_set_lane_count(dp, dp->link_train.lane_count);
+
+	for (i = 0; i < dp->link_train.lane_count; i++) {
+		analogix_dp_set_lane_link_training(dp,
+			dp->link_train.training_lane[i], i);
+	}
+
+	ret = readx_poll_timeout(analogix_dp_get_pll_lock_status, dp, status,
+				 status != PLL_UNLOCKED, 120,
+				 120 * DP_TIMEOUT_LOOP_COUNT);
+	if (ret) {
+		DRM_DEV_ERROR(dp->dev, "Wait for pll lock failed %d\n", ret);
+		return ret;
+	}
+
+	/* source Set training pattern 1 */
+	analogix_dp_set_training_pattern(dp, TRAINING_PTN1);
+	/* From DP spec, pattern must be on-screen for a minimum 500us */
+	usleep_range(500, 600);
+
+	analogix_dp_set_training_pattern(dp, TRAINING_PTN2);
+	/* From DP spec, pattern must be on-screen for a minimum 500us */
+	usleep_range(500, 600);
+
+	/* TODO: enhanced_mode?*/
+	analogix_dp_set_training_pattern(dp, DP_NONE);
+
+	/*
+	 * Useful for debugging issues with fast link training, disable for more
+	 * speed
+	 */
+	if (verify_fast_training) {
+		ret = drm_dp_dpcd_readb(&dp->aux, DP_LANE_ALIGN_STATUS_UPDATED,
+					&link_align);
+		if (ret < 0) {
+			DRM_DEV_ERROR(dp->dev, "Read align status failed %d\n",
+				      ret);
+			return ret;
+		}
+
+		ret = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status,
+				       2);
+		if (ret < 0) {
+			DRM_DEV_ERROR(dp->dev, "Read link status failed %d\n",
+				      ret);
+			return ret;
+		}
+
+		if (analogix_dp_clock_recovery_ok(link_status,
+						  dp->link_train.lane_count)) {
+			DRM_DEV_ERROR(dp->dev, "Clock recovery failed\n");
+			analogix_dp_reduce_link_rate(dp);
+			return -EIO;
+		}
+
+		if (analogix_dp_channel_eq_ok(link_status, link_align,
+					      dp->link_train.lane_count)) {
+			DRM_DEV_ERROR(dp->dev, "Channel EQ failed\n");
+			analogix_dp_reduce_link_rate(dp);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int analogix_dp_train_link(struct analogix_dp_device *dp)
+{
+	if (dp->fast_train_enable)
+		return analogix_dp_fast_link_train(dp);
+
+	return analogix_dp_full_link_train(dp, dp->video_info.max_lane_count,
+					   dp->video_info.max_link_rate);
+}
+
+static int analogix_dp_config_video(struct analogix_dp_device *dp)
+{
+	int timeout_loop = 0;
+	int done_count = 0;
+
+	analogix_dp_config_video_slave_mode(dp);
+
+	analogix_dp_set_video_color_format(dp);
+
+	if (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+		dev_err(dp->dev, "PLL is not locked yet.\n");
+		return -EINVAL;
+	}
+
+	for (;;) {
+		timeout_loop++;
+		if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0)
+			break;
+		if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
+			dev_err(dp->dev, "Timeout of slave video streamclk ok\n");
+			return -ETIMEDOUT;
+		}
+		usleep_range(1000, 1001);
+	}
+
+	/* Set to use the register calculated M/N video */
+	analogix_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0);
+
+	/* For video bist, Video timing must be generated by register */
+	analogix_dp_set_video_timing_mode(dp, VIDEO_TIMING_FROM_CAPTURE);
+
+	/* Disable video mute */
+	analogix_dp_enable_video_mute(dp, 0);
+
+	/* Configure video slave mode */
+	analogix_dp_enable_video_master(dp, 0);
+
+	/* Enable video */
+	analogix_dp_start_video(dp);
+
+	timeout_loop = 0;
+
+	for (;;) {
+		timeout_loop++;
+		if (analogix_dp_is_video_stream_on(dp) == 0) {
+			done_count++;
+			if (done_count > 10)
+				break;
+		} else if (done_count) {
+			done_count = 0;
+		}
+		if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
+			dev_warn(dp->dev,
+				 "Ignoring timeout of video streamclk ok\n");
+			break;
+		}
+
+		usleep_range(1000, 1001);
+	}
+
+	return 0;
+}
+
+static int analogix_dp_enable_scramble(struct analogix_dp_device *dp,
+				       bool enable)
+{
+	u8 data;
+	int ret;
+
+	if (enable) {
+		analogix_dp_enable_scrambling(dp);
+
+		ret = drm_dp_dpcd_readb(&dp->aux, DP_TRAINING_PATTERN_SET,
+					&data);
+		if (ret != 1)
+			return ret;
+		ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				   (u8)(data & ~DP_LINK_SCRAMBLING_DISABLE));
+	} else {
+		analogix_dp_disable_scrambling(dp);
+
+		ret = drm_dp_dpcd_readb(&dp->aux, DP_TRAINING_PATTERN_SET,
+					&data);
+		if (ret != 1)
+			return ret;
+		ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				   (u8)(data | DP_LINK_SCRAMBLING_DISABLE));
+	}
+	return ret < 0 ? ret : 0;
+}
+
+static irqreturn_t analogix_dp_hardirq(int irq, void *arg)
+{
+	struct analogix_dp_device *dp = arg;
+	irqreturn_t ret = IRQ_NONE;
+	enum dp_irq_type irq_type;
+
+	irq_type = analogix_dp_get_irq_type(dp);
+	if (irq_type != DP_IRQ_TYPE_UNKNOWN) {
+		analogix_dp_mute_hpd_interrupt(dp);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	return ret;
+}
+
+static irqreturn_t analogix_dp_irq_thread(int irq, void *arg)
+{
+	struct analogix_dp_device *dp = arg;
+	enum dp_irq_type irq_type;
+
+	irq_type = analogix_dp_get_irq_type(dp);
+	if (irq_type & DP_IRQ_TYPE_HP_CABLE_IN ||
+	    irq_type & DP_IRQ_TYPE_HP_CABLE_OUT) {
+		dev_dbg(dp->dev, "Detected cable status changed!\n");
+		if (dp->drm_dev)
+			drm_helper_hpd_irq_event(dp->drm_dev);
+	}
+
+	if (irq_type != DP_IRQ_TYPE_UNKNOWN) {
+		analogix_dp_clear_hotplug_interrupts(dp);
+		analogix_dp_unmute_hpd_interrupt(dp);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int analogix_dp_fast_link_train_detection(struct analogix_dp_device *dp)
+{
+	int ret;
+	u8 spread;
+
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_MAX_DOWNSPREAD, &spread);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to read downspread %d\n", ret);
+		return ret;
+	}
+	dp->fast_train_enable = !!(spread & DP_NO_AUX_HANDSHAKE_LINK_TRAINING);
+	dev_dbg(dp->dev, "fast link training %s\n",
+		dp->fast_train_enable ? "supported" : "unsupported");
+	return 0;
+}
+
+static int analogix_dp_commit(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	/* Keep the panel disabled while we configure video */
+	if (dp->plat_data->panel) {
+		if (drm_panel_disable(dp->plat_data->panel))
+			DRM_ERROR("failed to disable the panel\n");
+	}
+
+	ret = analogix_dp_train_link(dp);
+	if (ret) {
+		dev_err(dp->dev, "unable to do link train, ret=%d\n", ret);
+		return ret;
+	}
+
+	ret = analogix_dp_enable_scramble(dp, 1);
+	if (ret < 0) {
+		dev_err(dp->dev, "can not enable scramble\n");
+		return ret;
+	}
+
+	analogix_dp_init_video(dp);
+	ret = analogix_dp_config_video(dp);
+	if (ret) {
+		dev_err(dp->dev, "unable to config video\n");
+		return ret;
+	}
+
+	/* Safe to enable the panel now */
+	if (dp->plat_data->panel) {
+		ret = drm_panel_enable(dp->plat_data->panel);
+		if (ret) {
+			DRM_ERROR("failed to enable the panel\n");
+			return ret;
+		}
+	}
+
+	/* Check whether panel supports fast training */
+	ret = analogix_dp_fast_link_train_detection(dp);
+	if (ret)
+		return ret;
+
+	if (analogix_dp_detect_sink_psr(dp)) {
+		ret = analogix_dp_enable_sink_psr(dp);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static int analogix_dp_enable_psr(struct analogix_dp_device *dp)
+{
+	struct dp_sdp psr_vsc;
+	int ret;
+	u8 sink;
+
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_PSR_STATUS, &sink);
+	if (ret != 1)
+		DRM_DEV_ERROR(dp->dev, "Failed to read psr status %d\n", ret);
+	else if (sink == DP_PSR_SINK_ACTIVE_RFB)
+		return 0;
+
+	/* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */
+	memset(&psr_vsc, 0, sizeof(psr_vsc));
+	psr_vsc.sdp_header.HB0 = 0;
+	psr_vsc.sdp_header.HB1 = 0x7;
+	psr_vsc.sdp_header.HB2 = 0x2;
+	psr_vsc.sdp_header.HB3 = 0x8;
+	psr_vsc.db[0] = 0;
+	psr_vsc.db[1] = EDP_VSC_PSR_STATE_ACTIVE | EDP_VSC_PSR_CRC_VALUES_VALID;
+
+	ret = analogix_dp_send_psr_spd(dp, &psr_vsc, true);
+	if (!ret)
+		analogix_dp_set_analog_power_down(dp, POWER_ALL, true);
+
+	return ret;
+}
+
+static int analogix_dp_disable_psr(struct analogix_dp_device *dp)
+{
+	struct dp_sdp psr_vsc;
+	int ret;
+	u8 sink;
+
+	analogix_dp_set_analog_power_down(dp, POWER_ALL, false);
+
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
+	if (ret != 1) {
+		DRM_DEV_ERROR(dp->dev, "Failed to set DP Power0 %d\n", ret);
+		return ret;
+	}
+
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_PSR_STATUS, &sink);
+	if (ret != 1) {
+		DRM_DEV_ERROR(dp->dev, "Failed to read psr status %d\n", ret);
+		return ret;
+	} else if (sink == DP_PSR_SINK_INACTIVE) {
+		DRM_DEV_ERROR(dp->dev, "sink inactive, skip disable psr");
+		return 0;
+	}
+
+	ret = analogix_dp_train_link(dp);
+	if (ret) {
+		DRM_DEV_ERROR(dp->dev, "Failed to train the link %d\n", ret);
+		return ret;
+	}
+
+	/* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */
+	memset(&psr_vsc, 0, sizeof(psr_vsc));
+	psr_vsc.sdp_header.HB0 = 0;
+	psr_vsc.sdp_header.HB1 = 0x7;
+	psr_vsc.sdp_header.HB2 = 0x2;
+	psr_vsc.sdp_header.HB3 = 0x8;
+
+	psr_vsc.db[0] = 0;
+	psr_vsc.db[1] = 0;
+
+	return analogix_dp_send_psr_spd(dp, &psr_vsc, true);
+}
+
+/*
+ * This function is a bit of a catch-all for panel preparation, hopefully
+ * simplifying the logic of functions that need to prepare/unprepare the panel
+ * below.
+ *
+ * If @prepare is true, this function will prepare the panel. Conversely, if it
+ * is false, the panel will be unprepared.
+ *
+ * If @is_modeset_prepare is true, the function will disregard the current state
+ * of the panel and either prepare/unprepare the panel based on @prepare. Once
+ * it finishes, it will update dp->panel_is_modeset to reflect the current state
+ * of the panel.
+ */
+static int analogix_dp_prepare_panel(struct analogix_dp_device *dp,
+				     bool prepare, bool is_modeset_prepare)
+{
+	int ret = 0;
+
+	if (!dp->plat_data->panel)
+		return 0;
+
+	mutex_lock(&dp->panel_lock);
+
+	/*
+	 * Exit early if this is a temporary prepare/unprepare and we're already
+	 * modeset (since we neither want to prepare twice or unprepare early).
+	 */
+	if (dp->panel_is_modeset && !is_modeset_prepare)
+		goto out;
+
+	if (prepare)
+		ret = drm_panel_prepare(dp->plat_data->panel);
+	else
+		ret = drm_panel_unprepare(dp->plat_data->panel);
+
+	if (ret)
+		goto out;
+
+	if (is_modeset_prepare)
+		dp->panel_is_modeset = prepare;
+
+out:
+	mutex_unlock(&dp->panel_lock);
+	return ret;
+}
+
+static int analogix_dp_get_modes(struct drm_connector *connector)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+	struct edid *edid;
+	int ret, num_modes = 0;
+
+	if (dp->plat_data->panel) {
+		num_modes += drm_panel_get_modes(dp->plat_data->panel, connector);
+	} else {
+		ret = analogix_dp_prepare_panel(dp, true, false);
+		if (ret) {
+			DRM_ERROR("Failed to prepare panel (%d)\n", ret);
+			return 0;
+		}
+
+		pm_runtime_get_sync(dp->dev);
+		edid = drm_get_edid(connector, &dp->aux.ddc);
+		pm_runtime_put(dp->dev);
+		if (edid) {
+			drm_connector_update_edid_property(&dp->connector,
+							   edid);
+			num_modes += drm_add_edid_modes(&dp->connector, edid);
+			kfree(edid);
+		}
+
+		ret = analogix_dp_prepare_panel(dp, false, false);
+		if (ret)
+			DRM_ERROR("Failed to unprepare panel (%d)\n", ret);
+	}
+
+	if (dp->plat_data->get_modes)
+		num_modes += dp->plat_data->get_modes(dp->plat_data, connector);
+
+	return num_modes;
+}
+
+static struct drm_encoder *
+analogix_dp_best_encoder(struct drm_connector *connector)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+
+	return dp->encoder;
+}
+
+
+static int analogix_dp_atomic_check(struct drm_connector *connector,
+				    struct drm_atomic_state *state)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+	struct drm_connector_state *conn_state;
+	struct drm_crtc_state *crtc_state;
+
+	conn_state = drm_atomic_get_new_connector_state(state, connector);
+	if (WARN_ON(!conn_state))
+		return -ENODEV;
+
+	conn_state->self_refresh_aware = true;
+
+	if (!conn_state->crtc)
+		return 0;
+
+	crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);
+	if (!crtc_state)
+		return 0;
+
+	if (crtc_state->self_refresh_active && !dp->psr_supported)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct drm_connector_helper_funcs analogix_dp_connector_helper_funcs = {
+	.get_modes = analogix_dp_get_modes,
+	.best_encoder = analogix_dp_best_encoder,
+	.atomic_check = analogix_dp_atomic_check,
+};
+
+static enum drm_connector_status
+analogix_dp_detect(struct drm_connector *connector, bool force)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+	enum drm_connector_status status = connector_status_disconnected;
+	int ret;
+
+	if (dp->plat_data->panel)
+		return connector_status_connected;
+
+	ret = analogix_dp_prepare_panel(dp, true, false);
+	if (ret) {
+		DRM_ERROR("Failed to prepare panel (%d)\n", ret);
+		return connector_status_disconnected;
+	}
+
+	if (!analogix_dp_detect_hpd(dp))
+		status = connector_status_connected;
+
+	ret = analogix_dp_prepare_panel(dp, false, false);
+	if (ret)
+		DRM_ERROR("Failed to unprepare panel (%d)\n", ret);
+
+	return status;
+}
+
+static const struct drm_connector_funcs analogix_dp_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = analogix_dp_detect,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int analogix_dp_bridge_attach(struct drm_bridge *bridge,
+				     enum drm_bridge_attach_flags flags)
+{
+	struct analogix_dp_device *dp = bridge->driver_private;
+	struct drm_encoder *encoder = dp->encoder;
+	struct drm_connector *connector = NULL;
+	int ret = 0;
+
+	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+		DRM_ERROR("Fix bridge driver to make connector optional!");
+		return -EINVAL;
+	}
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	if (!dp->plat_data->skip_connector) {
+		connector = &dp->connector;
+		connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+		ret = drm_connector_init(dp->drm_dev, connector,
+					 &analogix_dp_connector_funcs,
+					 DRM_MODE_CONNECTOR_eDP);
+		if (ret) {
+			DRM_ERROR("Failed to initialize connector with drm\n");
+			return ret;
+		}
+
+		drm_connector_helper_add(connector,
+					 &analogix_dp_connector_helper_funcs);
+		drm_connector_attach_encoder(connector, encoder);
+	}
+
+	/*
+	 * NOTE: the connector registration is implemented in analogix
+	 * platform driver, that to say connector would be exist after
+	 * plat_data->attch return, that's why we record the connector
+	 * point after plat attached.
+	 */
+	if (dp->plat_data->attach) {
+		ret = dp->plat_data->attach(dp->plat_data, bridge, connector);
+		if (ret) {
+			DRM_ERROR("Failed at platform attach func\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static
+struct drm_crtc *analogix_dp_get_old_crtc(struct analogix_dp_device *dp,
+					  struct drm_atomic_state *state)
+{
+	struct drm_encoder *encoder = dp->encoder;
+	struct drm_connector *connector;
+	struct drm_connector_state *conn_state;
+
+	connector = drm_atomic_get_old_connector_for_encoder(state, encoder);
+	if (!connector)
+		return NULL;
+
+	conn_state = drm_atomic_get_old_connector_state(state, connector);
+	if (!conn_state)
+		return NULL;
+
+	return conn_state->crtc;
+}
+
+static
+struct drm_crtc *analogix_dp_get_new_crtc(struct analogix_dp_device *dp,
+					  struct drm_atomic_state *state)
+{
+	struct drm_encoder *encoder = dp->encoder;
+	struct drm_connector *connector;
+	struct drm_connector_state *conn_state;
+
+	connector = drm_atomic_get_new_connector_for_encoder(state, encoder);
+	if (!connector)
+		return NULL;
+
+	conn_state = drm_atomic_get_new_connector_state(state, connector);
+	if (!conn_state)
+		return NULL;
+
+	return conn_state->crtc;
+}
+
+static void
+analogix_dp_bridge_atomic_pre_enable(struct drm_bridge *bridge,
+				     struct drm_bridge_state *old_bridge_state)
+{
+	struct drm_atomic_state *old_state = old_bridge_state->base.state;
+	struct analogix_dp_device *dp = bridge->driver_private;
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *old_crtc_state;
+	int ret;
+
+	crtc = analogix_dp_get_new_crtc(dp, old_state);
+	if (!crtc)
+		return;
+
+	old_crtc_state = drm_atomic_get_old_crtc_state(old_state, crtc);
+	/* Don't touch the panel if we're coming back from PSR */
+	if (old_crtc_state && old_crtc_state->self_refresh_active)
+		return;
+
+	ret = analogix_dp_prepare_panel(dp, true, true);
+	if (ret)
+		DRM_ERROR("failed to setup the panel ret = %d\n", ret);
+}
+
+static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	pm_runtime_get_sync(dp->dev);
+
+	ret = clk_prepare_enable(dp->clock);
+	if (ret < 0) {
+		DRM_ERROR("Failed to prepare_enable the clock clk [%d]\n", ret);
+		goto out_dp_clk_pre;
+	}
+
+	if (dp->plat_data->power_on_start)
+		dp->plat_data->power_on_start(dp->plat_data);
+
+	phy_power_on(dp->phy);
+
+	ret = analogix_dp_init_dp(dp);
+	if (ret)
+		goto out_dp_init;
+
+	/*
+	 * According to DP spec v1.3 chap 3.5.1.2 Link Training,
+	 * We should first make sure the HPD signal is asserted high by device
+	 * when we want to establish a link with it.
+	 */
+	ret = analogix_dp_detect_hpd(dp);
+	if (ret) {
+		DRM_ERROR("failed to get hpd single ret = %d\n", ret);
+		goto out_dp_init;
+	}
+
+	ret = analogix_dp_commit(dp);
+	if (ret) {
+		DRM_ERROR("dp commit error, ret = %d\n", ret);
+		goto out_dp_init;
+	}
+
+	if (dp->plat_data->power_on_end)
+		dp->plat_data->power_on_end(dp->plat_data);
+
+	enable_irq(dp->irq);
+	return 0;
+
+out_dp_init:
+	phy_power_off(dp->phy);
+	if (dp->plat_data->power_off)
+		dp->plat_data->power_off(dp->plat_data);
+	clk_disable_unprepare(dp->clock);
+out_dp_clk_pre:
+	pm_runtime_put_sync(dp->dev);
+
+	return ret;
+}
+
+static void
+analogix_dp_bridge_atomic_enable(struct drm_bridge *bridge,
+				 struct drm_bridge_state *old_bridge_state)
+{
+	struct drm_atomic_state *old_state = old_bridge_state->base.state;
+	struct analogix_dp_device *dp = bridge->driver_private;
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *old_crtc_state;
+	int timeout_loop = 0;
+	int ret;
+
+	crtc = analogix_dp_get_new_crtc(dp, old_state);
+	if (!crtc)
+		return;
+
+	old_crtc_state = drm_atomic_get_old_crtc_state(old_state, crtc);
+	/* Not a full enable, just disable PSR and continue */
+	if (old_crtc_state && old_crtc_state->self_refresh_active) {
+		ret = analogix_dp_disable_psr(dp);
+		if (ret)
+			DRM_ERROR("Failed to disable psr %d\n", ret);
+		return;
+	}
+
+	if (dp->dpms_mode == DRM_MODE_DPMS_ON)
+		return;
+
+	while (timeout_loop < MAX_PLL_LOCK_LOOP) {
+		if (analogix_dp_set_bridge(dp) == 0) {
+			dp->dpms_mode = DRM_MODE_DPMS_ON;
+			return;
+		}
+		dev_err(dp->dev, "failed to set bridge, retry: %d\n",
+			timeout_loop);
+		timeout_loop++;
+		usleep_range(10, 11);
+	}
+	dev_err(dp->dev, "too many times retry set bridge, give it up\n");
+}
+
+static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
+{
+	struct analogix_dp_device *dp = bridge->driver_private;
+	int ret;
+
+	if (dp->dpms_mode != DRM_MODE_DPMS_ON)
+		return;
+
+	if (dp->plat_data->panel) {
+		if (drm_panel_disable(dp->plat_data->panel)) {
+			DRM_ERROR("failed to disable the panel\n");
+			return;
+		}
+	}
+
+	disable_irq(dp->irq);
+
+	if (dp->plat_data->power_off)
+		dp->plat_data->power_off(dp->plat_data);
+
+	analogix_dp_set_analog_power_down(dp, POWER_ALL, 1);
+	phy_power_off(dp->phy);
+
+	clk_disable_unprepare(dp->clock);
+
+	pm_runtime_put_sync(dp->dev);
+
+	ret = analogix_dp_prepare_panel(dp, false, true);
+	if (ret)
+		DRM_ERROR("failed to setup the panel ret = %d\n", ret);
+
+	dp->fast_train_enable = false;
+	dp->psr_supported = false;
+	dp->dpms_mode = DRM_MODE_DPMS_OFF;
+}
+
+static void
+analogix_dp_bridge_atomic_disable(struct drm_bridge *bridge,
+				  struct drm_bridge_state *old_bridge_state)
+{
+	struct drm_atomic_state *old_state = old_bridge_state->base.state;
+	struct analogix_dp_device *dp = bridge->driver_private;
+	struct drm_crtc *old_crtc, *new_crtc;
+	struct drm_crtc_state *old_crtc_state = NULL;
+	struct drm_crtc_state *new_crtc_state = NULL;
+	int ret;
+
+	new_crtc = analogix_dp_get_new_crtc(dp, old_state);
+	if (!new_crtc)
+		goto out;
+
+	new_crtc_state = drm_atomic_get_new_crtc_state(old_state, new_crtc);
+	if (!new_crtc_state)
+		goto out;
+
+	/* Don't do a full disable on PSR transitions */
+	if (new_crtc_state->self_refresh_active)
+		return;
+
+out:
+	old_crtc = analogix_dp_get_old_crtc(dp, old_state);
+	if (old_crtc) {
+		old_crtc_state = drm_atomic_get_old_crtc_state(old_state,
+							       old_crtc);
+
+		/* When moving from PSR to fully disabled, exit PSR first. */
+		if (old_crtc_state && old_crtc_state->self_refresh_active) {
+			ret = analogix_dp_disable_psr(dp);
+			if (ret)
+				DRM_ERROR("Failed to disable psr (%d)\n", ret);
+		}
+	}
+
+	analogix_dp_bridge_disable(bridge);
+}
+
+static void
+analogix_dp_bridge_atomic_post_disable(struct drm_bridge *bridge,
+				struct drm_bridge_state *old_bridge_state)
+{
+	struct drm_atomic_state *old_state = old_bridge_state->base.state;
+	struct analogix_dp_device *dp = bridge->driver_private;
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *new_crtc_state;
+	int ret;
+
+	crtc = analogix_dp_get_new_crtc(dp, old_state);
+	if (!crtc)
+		return;
+
+	new_crtc_state = drm_atomic_get_new_crtc_state(old_state, crtc);
+	if (!new_crtc_state || !new_crtc_state->self_refresh_active)
+		return;
+
+	ret = analogix_dp_enable_psr(dp);
+	if (ret)
+		DRM_ERROR("Failed to enable psr (%d)\n", ret);
+}
+
+static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
+				const struct drm_display_mode *orig_mode,
+				const struct drm_display_mode *mode)
+{
+	struct analogix_dp_device *dp = bridge->driver_private;
+	struct drm_display_info *display_info = &dp->connector.display_info;
+	struct video_info *video = &dp->video_info;
+	struct device_node *dp_node = dp->dev->of_node;
+	int vic;
+
+	/* Input video interlaces & hsync pol & vsync pol */
+	video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
+	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
+
+	/* Input video dynamic_range & colorimetry */
+	vic = drm_match_cea_mode(mode);
+	if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) ||
+	    (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) {
+		video->dynamic_range = CEA;
+		video->ycbcr_coeff = COLOR_YCBCR601;
+	} else if (vic) {
+		video->dynamic_range = CEA;
+		video->ycbcr_coeff = COLOR_YCBCR709;
+	} else {
+		video->dynamic_range = VESA;
+		video->ycbcr_coeff = COLOR_YCBCR709;
+	}
+
+	/* Input vide bpc and color_formats */
+	switch (display_info->bpc) {
+	case 12:
+		video->color_depth = COLOR_12;
+		break;
+	case 10:
+		video->color_depth = COLOR_10;
+		break;
+	case 8:
+		video->color_depth = COLOR_8;
+		break;
+	case 6:
+		video->color_depth = COLOR_6;
+		break;
+	default:
+		video->color_depth = COLOR_8;
+		break;
+	}
+	if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+		video->color_space = COLOR_YCBCR444;
+	else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+		video->color_space = COLOR_YCBCR422;
+	else
+		video->color_space = COLOR_RGB;
+
+	/*
+	 * NOTE: those property parsing code is used for providing backward
+	 * compatibility for samsung platform.
+	 * Due to we used the "of_property_read_u32" interfaces, when this
+	 * property isn't present, the "video_info" can keep the original
+	 * values and wouldn't be modified.
+	 */
+	of_property_read_u32(dp_node, "samsung,color-space",
+			     &video->color_space);
+	of_property_read_u32(dp_node, "samsung,dynamic-range",
+			     &video->dynamic_range);
+	of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
+			     &video->ycbcr_coeff);
+	of_property_read_u32(dp_node, "samsung,color-depth",
+			     &video->color_depth);
+	if (of_property_read_bool(dp_node, "hsync-active-high"))
+		video->h_sync_polarity = true;
+	if (of_property_read_bool(dp_node, "vsync-active-high"))
+		video->v_sync_polarity = true;
+	if (of_property_read_bool(dp_node, "interlaced"))
+		video->interlaced = true;
+}
+
+static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset = drm_atomic_helper_bridge_reset,
+	.atomic_pre_enable = analogix_dp_bridge_atomic_pre_enable,
+	.atomic_enable = analogix_dp_bridge_atomic_enable,
+	.atomic_disable = analogix_dp_bridge_atomic_disable,
+	.atomic_post_disable = analogix_dp_bridge_atomic_post_disable,
+	.mode_set = analogix_dp_bridge_mode_set,
+	.attach = analogix_dp_bridge_attach,
+};
+
+static int analogix_dp_create_bridge(struct drm_device *drm_dev,
+				     struct analogix_dp_device *dp)
+{
+	struct drm_bridge *bridge;
+	int ret;
+
+	bridge = devm_kzalloc(drm_dev->dev, sizeof(*bridge), GFP_KERNEL);
+	if (!bridge) {
+		DRM_ERROR("failed to allocate for drm bridge\n");
+		return -ENOMEM;
+	}
+
+	dp->bridge = bridge;
+
+	bridge->driver_private = dp;
+	bridge->funcs = &analogix_dp_bridge_funcs;
+
+	ret = drm_bridge_attach(dp->encoder, bridge, NULL, 0);
+	if (ret) {
+		DRM_ERROR("failed to attach drm bridge\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
+{
+	struct device_node *dp_node = dp->dev->of_node;
+	struct video_info *video_info = &dp->video_info;
+
+	switch (dp->plat_data->dev_type) {
+	case RK3288_DP:
+	case RK3399_EDP:
+		/*
+		 * Like Rk3288 DisplayPort TRM indicate that "Main link
+		 * containing 4 physical lanes of 2.7/1.62 Gbps/lane".
+		 */
+		video_info->max_link_rate = 0x0A;
+		video_info->max_lane_count = 0x04;
+		break;
+	case EXYNOS_DP:
+		/*
+		 * NOTE: those property parseing code is used for
+		 * providing backward compatibility for samsung platform.
+		 */
+		of_property_read_u32(dp_node, "samsung,link-rate",
+				     &video_info->max_link_rate);
+		of_property_read_u32(dp_node, "samsung,lane-count",
+				     &video_info->max_lane_count);
+		break;
+	}
+
+	return 0;
+}
+
+static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
+				       struct drm_dp_aux_msg *msg)
+{
+	struct analogix_dp_device *dp = to_dp(aux);
+	int ret;
+
+	pm_runtime_get_sync(dp->dev);
+
+	ret = analogix_dp_detect_hpd(dp);
+	if (ret)
+		goto out;
+
+	ret = analogix_dp_transfer(dp, msg);
+out:
+	pm_runtime_put(dp->dev);
+
+	return ret;
+}
+
+struct analogix_dp_device *
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct analogix_dp_device *dp;
+	struct resource *res;
+	unsigned int irq_flags;
+	int ret;
+
+	if (!plat_data) {
+		dev_err(dev, "Invalided input plat_data\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	dp = devm_kzalloc(dev, sizeof(struct analogix_dp_device), GFP_KERNEL);
+	if (!dp)
+		return ERR_PTR(-ENOMEM);
+
+	dp->dev = &pdev->dev;
+	dp->dpms_mode = DRM_MODE_DPMS_OFF;
+
+	mutex_init(&dp->panel_lock);
+	dp->panel_is_modeset = false;
+
+	/*
+	 * platform dp driver need containor_of the plat_data to get
+	 * the driver private data, so we need to store the point of
+	 * plat_data, not the context of plat_data.
+	 */
+	dp->plat_data = plat_data;
+
+	ret = analogix_dp_dt_parse_pdata(dp);
+	if (ret)
+		return ERR_PTR(ret);
+
+	dp->phy = devm_phy_get(dp->dev, "dp");
+	if (IS_ERR(dp->phy)) {
+		dev_err(dp->dev, "no DP phy configured\n");
+		ret = PTR_ERR(dp->phy);
+		if (ret) {
+			/*
+			 * phy itself is not enabled, so we can move forward
+			 * assigning NULL to phy pointer.
+			 */
+			if (ret == -ENOSYS || ret == -ENODEV)
+				dp->phy = NULL;
+			else
+				return ERR_PTR(ret);
+		}
+	}
+
+	dp->clock = devm_clk_get(&pdev->dev, "dp");
+	if (IS_ERR(dp->clock)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return ERR_CAST(dp->clock);
+	}
+
+	clk_prepare_enable(dp->clock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	dp->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dp->reg_base)) {
+		ret = PTR_ERR(dp->reg_base);
+		goto err_disable_clk;
+	}
+
+	dp->force_hpd = of_property_read_bool(dev->of_node, "force-hpd");
+
+	/* Try two different names */
+	dp->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
+	if (!dp->hpd_gpiod)
+		dp->hpd_gpiod = devm_gpiod_get_optional(dev, "samsung,hpd",
+							GPIOD_IN);
+	if (IS_ERR(dp->hpd_gpiod)) {
+		dev_err(dev, "error getting HDP GPIO: %ld\n",
+			PTR_ERR(dp->hpd_gpiod));
+		ret = PTR_ERR(dp->hpd_gpiod);
+		goto err_disable_clk;
+	}
+
+	if (dp->hpd_gpiod) {
+		/*
+		 * Set up the hotplug GPIO from the device tree as an interrupt.
+		 * Simply specifying a different interrupt in the device tree
+		 * doesn't work since we handle hotplug rather differently when
+		 * using a GPIO.  We also need the actual GPIO specifier so
+		 * that we can get the current state of the GPIO.
+		 */
+		dp->irq = gpiod_to_irq(dp->hpd_gpiod);
+		irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
+	} else {
+		dp->irq = platform_get_irq(pdev, 0);
+		irq_flags = 0;
+	}
+
+	if (dp->irq == -ENXIO) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		ret = -ENODEV;
+		goto err_disable_clk;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, dp->irq,
+					analogix_dp_hardirq,
+					analogix_dp_irq_thread,
+					irq_flags, "analogix-dp", dp);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		goto err_disable_clk;
+	}
+	disable_irq(dp->irq);
+
+	return dp;
+
+err_disable_clk:
+	clk_disable_unprepare(dp->clock);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_probe);
+
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
+{
+	int ret;
+
+	dp->drm_dev = drm_dev;
+	dp->encoder = dp->plat_data->encoder;
+
+	dp->aux.name = "DP-AUX";
+	dp->aux.transfer = analogix_dpaux_transfer;
+	dp->aux.dev = dp->dev;
+
+	ret = drm_dp_aux_register(&dp->aux);
+	if (ret)
+		return ret;
+
+	pm_runtime_enable(dp->dev);
+
+	ret = analogix_dp_create_bridge(drm_dev, dp);
+	if (ret) {
+		DRM_ERROR("failed to create bridge (%d)\n", ret);
+		goto err_disable_pm_runtime;
+	}
+
+	return 0;
+
+err_disable_pm_runtime:
+	pm_runtime_disable(dp->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_bind);
+
+void analogix_dp_unbind(struct analogix_dp_device *dp)
+{
+	analogix_dp_bridge_disable(dp->bridge);
+	dp->connector.funcs->destroy(&dp->connector);
+
+	if (dp->plat_data->panel) {
+		if (drm_panel_unprepare(dp->plat_data->panel))
+			DRM_ERROR("failed to turnoff the panel\n");
+	}
+
+	drm_dp_aux_unregister(&dp->aux);
+	pm_runtime_disable(dp->dev);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_unbind);
+
+void analogix_dp_remove(struct analogix_dp_device *dp)
+{
+	clk_disable_unprepare(dp->clock);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_remove);
+
+#ifdef CONFIG_PM
+int analogix_dp_suspend(struct analogix_dp_device *dp)
+{
+	clk_disable_unprepare(dp->clock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_suspend);
+
+int analogix_dp_resume(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	ret = clk_prepare_enable(dp->clock);
+	if (ret < 0) {
+		DRM_ERROR("Failed to prepare_enable the clock clk [%d]\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_resume);
+#endif
+
+int analogix_dp_start_crc(struct drm_connector *connector)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+
+	if (!connector->state->crtc) {
+		DRM_ERROR("Connector %s doesn't currently have a CRTC.\n",
+			  connector->name);
+		return -EINVAL;
+	}
+
+	return drm_dp_start_crc(&dp->aux, connector->state->crtc);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_start_crc);
+
+int analogix_dp_stop_crc(struct drm_connector *connector)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+
+	return drm_dp_stop_crc(&dp->aux);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_stop_crc);
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("Analogix DP Core Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
new file mode 100644
index 000000000..c051502d7
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -0,0 +1,259 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Header file for Analogix DP (Display Port) core interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ */
+
+#ifndef _ANALOGIX_DP_CORE_H
+#define _ANALOGIX_DP_CORE_H
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_dp_helper.h>
+
+#define DP_TIMEOUT_LOOP_COUNT 100
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 5
+#define MAX_PLL_LOCK_LOOP 5
+
+/* Training takes 22ms if AUX channel comm fails. Use this as retry interval */
+#define DP_TIMEOUT_TRAINING_US			22000
+#define DP_TIMEOUT_PSR_LOOP_MS			300
+
+/* DP_MAX_LANE_COUNT */
+#define DPCD_ENHANCED_FRAME_CAP(x)		(((x) >> 7) & 0x1)
+#define DPCD_MAX_LANE_COUNT(x)			((x) & 0x1f)
+
+/* DP_LANE_COUNT_SET */
+#define DPCD_LANE_COUNT_SET(x)			((x) & 0x1f)
+
+/* DP_TRAINING_LANE0_SET */
+#define DPCD_PRE_EMPHASIS_SET(x)		(((x) & 0x3) << 3)
+#define DPCD_PRE_EMPHASIS_GET(x)		(((x) >> 3) & 0x3)
+#define DPCD_VOLTAGE_SWING_SET(x)		(((x) & 0x3) << 0)
+#define DPCD_VOLTAGE_SWING_GET(x)		(((x) >> 0) & 0x3)
+
+struct gpio_desc;
+
+enum link_lane_count_type {
+	LANE_COUNT1 = 1,
+	LANE_COUNT2 = 2,
+	LANE_COUNT4 = 4
+};
+
+enum link_training_state {
+	START,
+	CLOCK_RECOVERY,
+	EQUALIZER_TRAINING,
+	FINISHED,
+	FAILED
+};
+
+enum voltage_swing_level {
+	VOLTAGE_LEVEL_0,
+	VOLTAGE_LEVEL_1,
+	VOLTAGE_LEVEL_2,
+	VOLTAGE_LEVEL_3,
+};
+
+enum pre_emphasis_level {
+	PRE_EMPHASIS_LEVEL_0,
+	PRE_EMPHASIS_LEVEL_1,
+	PRE_EMPHASIS_LEVEL_2,
+	PRE_EMPHASIS_LEVEL_3,
+};
+
+enum pattern_set {
+	PRBS7,
+	D10_2,
+	TRAINING_PTN1,
+	TRAINING_PTN2,
+	DP_NONE
+};
+
+enum color_space {
+	COLOR_RGB,
+	COLOR_YCBCR422,
+	COLOR_YCBCR444
+};
+
+enum color_depth {
+	COLOR_6,
+	COLOR_8,
+	COLOR_10,
+	COLOR_12
+};
+
+enum color_coefficient {
+	COLOR_YCBCR601,
+	COLOR_YCBCR709
+};
+
+enum dynamic_range {
+	VESA,
+	CEA
+};
+
+enum pll_status {
+	PLL_UNLOCKED,
+	PLL_LOCKED
+};
+
+enum clock_recovery_m_value_type {
+	CALCULATED_M,
+	REGISTER_M
+};
+
+enum video_timing_recognition_type {
+	VIDEO_TIMING_FROM_CAPTURE,
+	VIDEO_TIMING_FROM_REGISTER
+};
+
+enum analog_power_block {
+	AUX_BLOCK,
+	CH0_BLOCK,
+	CH1_BLOCK,
+	CH2_BLOCK,
+	CH3_BLOCK,
+	ANALOG_TOTAL,
+	POWER_ALL
+};
+
+enum dp_irq_type {
+	DP_IRQ_TYPE_HP_CABLE_IN  = BIT(0),
+	DP_IRQ_TYPE_HP_CABLE_OUT = BIT(1),
+	DP_IRQ_TYPE_HP_CHANGE    = BIT(2),
+	DP_IRQ_TYPE_UNKNOWN      = BIT(3),
+};
+
+struct video_info {
+	char *name;
+
+	bool h_sync_polarity;
+	bool v_sync_polarity;
+	bool interlaced;
+
+	enum color_space color_space;
+	enum dynamic_range dynamic_range;
+	enum color_coefficient ycbcr_coeff;
+	enum color_depth color_depth;
+
+	int max_link_rate;
+	enum link_lane_count_type max_lane_count;
+};
+
+struct link_train {
+	int eq_loop;
+	int cr_loop[4];
+
+	u8 link_rate;
+	u8 lane_count;
+	u8 training_lane[4];
+
+	enum link_training_state lt_state;
+};
+
+struct analogix_dp_device {
+	struct drm_encoder	*encoder;
+	struct device		*dev;
+	struct drm_device	*drm_dev;
+	struct drm_connector	connector;
+	struct drm_bridge	*bridge;
+	struct drm_dp_aux       aux;
+	struct clk		*clock;
+	unsigned int		irq;
+	void __iomem		*reg_base;
+
+	struct video_info	video_info;
+	struct link_train	link_train;
+	struct phy		*phy;
+	int			dpms_mode;
+	struct gpio_desc	*hpd_gpiod;
+	bool                    force_hpd;
+	bool			fast_train_enable;
+	bool			psr_supported;
+
+	struct mutex		panel_lock;
+	bool			panel_is_modeset;
+
+	struct analogix_dp_plat_data *plat_data;
+};
+
+/* analogix_dp_reg.c */
+void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_stop_video(struct analogix_dp_device *dp);
+void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_init_analog_param(struct analogix_dp_device *dp);
+void analogix_dp_init_interrupt(struct analogix_dp_device *dp);
+void analogix_dp_reset(struct analogix_dp_device *dp);
+void analogix_dp_swreset(struct analogix_dp_device *dp);
+void analogix_dp_config_interrupt(struct analogix_dp_device *dp);
+void analogix_dp_mute_hpd_interrupt(struct analogix_dp_device *dp);
+void analogix_dp_unmute_hpd_interrupt(struct analogix_dp_device *dp);
+enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp);
+void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
+				       enum analog_power_block block,
+				       bool enable);
+int analogix_dp_init_analog_func(struct analogix_dp_device *dp);
+void analogix_dp_init_hpd(struct analogix_dp_device *dp);
+void analogix_dp_force_hpd(struct analogix_dp_device *dp);
+enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp);
+void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp);
+void analogix_dp_reset_aux(struct analogix_dp_device *dp);
+void analogix_dp_init_aux(struct analogix_dp_device *dp);
+int analogix_dp_get_plug_in_status(struct analogix_dp_device *dp);
+void analogix_dp_enable_sw_function(struct analogix_dp_device *dp);
+void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype);
+void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype);
+void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count);
+void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count);
+void analogix_dp_enable_enhanced_mode(struct analogix_dp_device *dp,
+				      bool enable);
+void analogix_dp_set_training_pattern(struct analogix_dp_device *dp,
+				      enum pattern_set pattern);
+void analogix_dp_set_lane0_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level);
+void analogix_dp_set_lane1_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level);
+void analogix_dp_set_lane2_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level);
+void analogix_dp_set_lane3_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level);
+void analogix_dp_set_lane0_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane);
+void analogix_dp_set_lane1_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane);
+void analogix_dp_set_lane2_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane);
+void analogix_dp_set_lane3_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane);
+u32 analogix_dp_get_lane0_link_training(struct analogix_dp_device *dp);
+u32 analogix_dp_get_lane1_link_training(struct analogix_dp_device *dp);
+u32 analogix_dp_get_lane2_link_training(struct analogix_dp_device *dp);
+u32 analogix_dp_get_lane3_link_training(struct analogix_dp_device *dp);
+void analogix_dp_reset_macro(struct analogix_dp_device *dp);
+void analogix_dp_init_video(struct analogix_dp_device *dp);
+
+void analogix_dp_set_video_color_format(struct analogix_dp_device *dp);
+int analogix_dp_is_slave_video_stream_clock_on(struct analogix_dp_device *dp);
+void analogix_dp_set_video_cr_mn(struct analogix_dp_device *dp,
+				 enum clock_recovery_m_value_type type,
+				 u32 m_value,
+				 u32 n_value);
+void analogix_dp_set_video_timing_mode(struct analogix_dp_device *dp, u32 type);
+void analogix_dp_enable_video_master(struct analogix_dp_device *dp,
+				     bool enable);
+void analogix_dp_start_video(struct analogix_dp_device *dp);
+int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp);
+void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp);
+void analogix_dp_enable_scrambling(struct analogix_dp_device *dp);
+void analogix_dp_disable_scrambling(struct analogix_dp_device *dp);
+void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp);
+int analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
+			     struct dp_sdp *vsc, bool blocking);
+ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
+			     struct drm_dp_aux_msg *msg);
+
+#endif /* _ANALOGIX_DP_CORE_H */
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
new file mode 100644
index 000000000..cab3f5c4e
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -0,0 +1,1242 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Analogix DP (Display port) core register interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include <drm/bridge/analogix_dp.h>
+
+#include "analogix_dp_core.h"
+#include "analogix_dp_reg.h"
+
+#define COMMON_INT_MASK_1	0
+#define COMMON_INT_MASK_2	0
+#define COMMON_INT_MASK_3	0
+#define COMMON_INT_MASK_4	(HOTPLUG_CHG | HPD_LOST | PLUG)
+#define INT_STA_MASK		INT_HPD
+
+void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable) {
+		reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+		reg |= HDCP_VIDEO_MUTE;
+		writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+	} else {
+		reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+		reg &= ~HDCP_VIDEO_MUTE;
+		writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+	}
+}
+
+void analogix_dp_stop_video(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+	reg &= ~VIDEO_EN;
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+}
+
+void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable)
+		reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
+		      LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
+	else
+		reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
+		      LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
+
+	writel(reg, dp->reg_base + ANALOGIX_DP_LANE_MAP);
+}
+
+void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = TX_TERMINAL_CTRL_50_OHM;
+	writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_1);
+
+	reg = SEL_24M | TX_DVDD_BIT_1_0625V;
+	writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
+
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
+		reg = REF_CLK_24M;
+		if (dp->plat_data->dev_type == RK3288_DP)
+			reg ^= REF_CLK_MASK;
+
+		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
+		writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
+		writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
+		writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
+		writel(0x22, dp->reg_base + ANALOGIX_DP_PLL_REG_5);
+	}
+
+	reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
+	writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
+
+	reg = PD_RING_OSC | AUX_TERMINAL_CTRL_50_OHM |
+		TX_CUR1_2X | TX_CUR_16_MA;
+	writel(reg, dp->reg_base + ANALOGIX_DP_PLL_FILTER_CTL_1);
+
+	reg = CH3_AMP_400_MV | CH2_AMP_400_MV |
+		CH1_AMP_400_MV | CH0_AMP_400_MV;
+	writel(reg, dp->reg_base + ANALOGIX_DP_TX_AMP_TUNING_CTL);
+}
+
+void analogix_dp_init_interrupt(struct analogix_dp_device *dp)
+{
+	/* Set interrupt pin assertion polarity as high */
+	writel(INT_POL1 | INT_POL0, dp->reg_base + ANALOGIX_DP_INT_CTL);
+
+	/* Clear pending regisers */
+	writel(0xff, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_1);
+	writel(0x4f, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_2);
+	writel(0xe0, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_3);
+	writel(0xe7, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_4);
+	writel(0x63, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+	/* 0:mask,1: unmask */
+	writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_1);
+	writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_2);
+	writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_3);
+	writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+	writel(0x00, dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+}
+
+void analogix_dp_reset(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	analogix_dp_stop_video(dp);
+	analogix_dp_enable_video_mute(dp, 0);
+
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+		reg = RK_VID_CAP_FUNC_EN_N | RK_VID_FIFO_FUNC_EN_N |
+			SW_FUNC_EN_N;
+	else
+		reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
+			AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
+			HDCP_FUNC_EN_N | SW_FUNC_EN_N;
+
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+
+	reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
+		SERDES_FIFO_FUNC_EN_N |
+		LS_CLK_DOMAIN_FUNC_EN_N;
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+
+	usleep_range(20, 30);
+
+	analogix_dp_lane_swap(dp, 0);
+
+	writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+	writel(0x40, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+	writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+
+	writel(0x0, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	writel(0x0, dp->reg_base + ANALOGIX_DP_HDCP_CTL);
+
+	writel(0x5e, dp->reg_base + ANALOGIX_DP_HPD_DEGLITCH_L);
+	writel(0x1a, dp->reg_base + ANALOGIX_DP_HPD_DEGLITCH_H);
+
+	writel(0x10, dp->reg_base + ANALOGIX_DP_LINK_DEBUG_CTL);
+
+	writel(0x0, dp->reg_base + ANALOGIX_DP_PHY_TEST);
+
+	writel(0x0, dp->reg_base + ANALOGIX_DP_VIDEO_FIFO_THRD);
+	writel(0x20, dp->reg_base + ANALOGIX_DP_AUDIO_MARGIN);
+
+	writel(0x4, dp->reg_base + ANALOGIX_DP_M_VID_GEN_FILTER_TH);
+	writel(0x2, dp->reg_base + ANALOGIX_DP_M_AUD_GEN_FILTER_TH);
+
+	writel(0x00000101, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+}
+
+void analogix_dp_swreset(struct analogix_dp_device *dp)
+{
+	writel(RESET_DP_TX, dp->reg_base + ANALOGIX_DP_TX_SW_RESET);
+}
+
+void analogix_dp_config_interrupt(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* 0: mask, 1: unmask */
+	reg = COMMON_INT_MASK_1;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_1);
+
+	reg = COMMON_INT_MASK_2;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_2);
+
+	reg = COMMON_INT_MASK_3;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_3);
+
+	reg = COMMON_INT_MASK_4;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+
+	reg = INT_STA_MASK;
+	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+}
+
+void analogix_dp_mute_hpd_interrupt(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* 0: mask, 1: unmask */
+	reg = readl(dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+	reg &= ~COMMON_INT_MASK_4;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+	reg &= ~INT_STA_MASK;
+	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+}
+
+void analogix_dp_unmute_hpd_interrupt(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* 0: mask, 1: unmask */
+	reg = COMMON_INT_MASK_4;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+
+	reg = INT_STA_MASK;
+	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+}
+
+enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_DEBUG_CTL);
+	if (reg & PLL_LOCK)
+		return PLL_LOCKED;
+	else
+		return PLL_UNLOCKED;
+}
+
+void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable)
+{
+	u32 reg;
+	u32 mask = DP_PLL_PD;
+	u32 pd_addr = ANALOGIX_DP_PLL_CTL;
+
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
+		pd_addr = ANALOGIX_DP_PD;
+		mask = RK_PLL_PD;
+	}
+
+	reg = readl(dp->reg_base + pd_addr);
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	writel(reg, dp->reg_base + pd_addr);
+}
+
+void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
+				       enum analog_power_block block,
+				       bool enable)
+{
+	u32 reg;
+	u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
+	u32 mask;
+
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+		phy_pd_addr = ANALOGIX_DP_PD;
+
+	switch (block) {
+	case AUX_BLOCK:
+		if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+			mask = RK_AUX_PD;
+		else
+			mask = AUX_PD;
+
+		reg = readl(dp->reg_base + phy_pd_addr);
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		writel(reg, dp->reg_base + phy_pd_addr);
+		break;
+	case CH0_BLOCK:
+		mask = CH0_PD;
+		reg = readl(dp->reg_base + phy_pd_addr);
+
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		writel(reg, dp->reg_base + phy_pd_addr);
+		break;
+	case CH1_BLOCK:
+		mask = CH1_PD;
+		reg = readl(dp->reg_base + phy_pd_addr);
+
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		writel(reg, dp->reg_base + phy_pd_addr);
+		break;
+	case CH2_BLOCK:
+		mask = CH2_PD;
+		reg = readl(dp->reg_base + phy_pd_addr);
+
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		writel(reg, dp->reg_base + phy_pd_addr);
+		break;
+	case CH3_BLOCK:
+		mask = CH3_PD;
+		reg = readl(dp->reg_base + phy_pd_addr);
+
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		writel(reg, dp->reg_base + phy_pd_addr);
+		break;
+	case ANALOG_TOTAL:
+		/*
+		 * There is no bit named DP_PHY_PD, so We used DP_INC_BG
+		 * to power off everything instead of DP_PHY_PD in
+		 * Rockchip
+		 */
+		if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+			mask = DP_INC_BG;
+		else
+			mask = DP_PHY_PD;
+
+		reg = readl(dp->reg_base + phy_pd_addr);
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+
+		writel(reg, dp->reg_base + phy_pd_addr);
+		if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+			usleep_range(10, 15);
+		break;
+	case POWER_ALL:
+		if (enable) {
+			reg = DP_ALL_PD;
+			writel(reg, dp->reg_base + phy_pd_addr);
+		} else {
+			reg = DP_ALL_PD;
+			writel(reg, dp->reg_base + phy_pd_addr);
+			usleep_range(10, 15);
+			reg &= ~DP_INC_BG;
+			writel(reg, dp->reg_base + phy_pd_addr);
+			usleep_range(10, 15);
+
+			writel(0x00, dp->reg_base + phy_pd_addr);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+int analogix_dp_init_analog_func(struct analogix_dp_device *dp)
+{
+	u32 reg;
+	int timeout_loop = 0;
+
+	analogix_dp_set_analog_power_down(dp, POWER_ALL, 0);
+
+	reg = PLL_LOCK_CHG;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_1);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_DEBUG_CTL);
+	reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
+	writel(reg, dp->reg_base + ANALOGIX_DP_DEBUG_CTL);
+
+	/* Power up PLL */
+	if (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+		analogix_dp_set_pll_power_down(dp, 0);
+
+		while (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+			timeout_loop++;
+			if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+				dev_err(dp->dev, "failed to get pll lock status\n");
+				return -ETIMEDOUT;
+			}
+			usleep_range(10, 20);
+		}
+	}
+
+	/* Enable Serdes FIFO function and Link symbol clock domain module */
+	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+	reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
+		| AUX_FUNC_EN_N);
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+	return 0;
+}
+
+void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	if (dp->hpd_gpiod)
+		return;
+
+	reg = HOTPLUG_CHG | HPD_LOST | PLUG;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_4);
+
+	reg = INT_HPD;
+	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA);
+}
+
+void analogix_dp_init_hpd(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	if (dp->hpd_gpiod)
+		return;
+
+	analogix_dp_clear_hotplug_interrupts(dp);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	reg &= ~(F_HPD | HPD_CTRL);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
+void analogix_dp_force_hpd(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	reg = (F_HPD | HPD_CTRL);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
+enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	if (dp->hpd_gpiod) {
+		reg = gpiod_get_value(dp->hpd_gpiod);
+		if (reg)
+			return DP_IRQ_TYPE_HP_CABLE_IN;
+		else
+			return DP_IRQ_TYPE_HP_CABLE_OUT;
+	} else {
+		/* Parse hotplug interrupt status register */
+		reg = readl(dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_4);
+
+		if (reg & PLUG)
+			return DP_IRQ_TYPE_HP_CABLE_IN;
+
+		if (reg & HPD_LOST)
+			return DP_IRQ_TYPE_HP_CABLE_OUT;
+
+		if (reg & HOTPLUG_CHG)
+			return DP_IRQ_TYPE_HP_CHANGE;
+
+		return DP_IRQ_TYPE_UNKNOWN;
+	}
+}
+
+void analogix_dp_reset_aux(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* Disable AUX channel module */
+	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+	reg |= AUX_FUNC_EN_N;
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+}
+
+void analogix_dp_init_aux(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* Clear inerrupts related to AUX channel */
+	reg = RPLY_RECEIV | AUX_ERR;
+	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+	analogix_dp_set_analog_power_down(dp, AUX_BLOCK, true);
+	usleep_range(10, 11);
+	analogix_dp_set_analog_power_down(dp, AUX_BLOCK, false);
+
+	analogix_dp_reset_aux(dp);
+
+	/* AUX_BIT_PERIOD_EXPECTED_DELAY doesn't apply to Rockchip IP */
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+		reg = 0;
+	else
+		reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3);
+
+	/* Disable AUX transaction H/W retry */
+	reg |= AUX_HW_RETRY_COUNT_SEL(0) |
+	       AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_HW_RETRY_CTL);
+
+	/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
+	reg = DEFER_CTRL_EN | DEFER_COUNT(1);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_DEFER_CTL);
+
+	/* Enable AUX channel module */
+	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+	reg &= ~AUX_FUNC_EN_N;
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+}
+
+int analogix_dp_get_plug_in_status(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	if (dp->hpd_gpiod) {
+		if (gpiod_get_value(dp->hpd_gpiod))
+			return 0;
+	} else {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+		if (reg & HPD_STATUS)
+			return 0;
+	}
+
+	return -EINVAL;
+}
+
+void analogix_dp_enable_sw_function(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+	reg &= ~SW_FUNC_EN_N;
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+}
+
+int analogix_dp_start_aux_transaction(struct analogix_dp_device *dp)
+{
+	int reg;
+	int retval = 0;
+	int timeout_loop = 0;
+
+	/* Enable AUX CH operation */
+	reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+	reg |= AUX_EN;
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+
+	/* Is AUX CH command reply received? */
+	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+	while (!(reg & RPLY_RECEIV)) {
+		timeout_loop++;
+		if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+			dev_err(dp->dev, "AUX CH command reply failed!\n");
+			return -ETIMEDOUT;
+		}
+		reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+		usleep_range(10, 11);
+	}
+
+	/* Clear interrupt source for AUX CH command reply */
+	writel(RPLY_RECEIV, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+	/* Clear interrupt source for AUX CH access error */
+	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+	if (reg & AUX_ERR) {
+		writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA);
+		return -EREMOTEIO;
+	}
+
+	/* Check AUX CH error access status */
+	reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_STA);
+	if ((reg & AUX_STATUS_MASK) != 0) {
+		dev_err(dp->dev, "AUX CH error happens: %d\n\n",
+			reg & AUX_STATUS_MASK);
+		return -EREMOTEIO;
+	}
+
+	return retval;
+}
+
+int analogix_dp_write_byte_to_dpcd(struct analogix_dp_device *dp,
+				   unsigned int reg_addr,
+				   unsigned char data)
+{
+	u32 reg;
+	int i;
+	int retval;
+
+	for (i = 0; i < 3; i++) {
+		/* Clear AUX CH data buffer */
+		reg = BUF_CLR;
+		writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+		/* Select DPCD device address */
+		reg = AUX_ADDR_7_0(reg_addr);
+		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+		reg = AUX_ADDR_15_8(reg_addr);
+		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+		reg = AUX_ADDR_19_16(reg_addr);
+		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+		/* Write data buffer */
+		reg = (unsigned int)data;
+		writel(reg, dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
+
+		/*
+		 * Set DisplayPort transaction and write 1 byte
+		 * If bit 3 is 1, DisplayPort transaction.
+		 * If Bit 3 is 0, I2C transaction.
+		 */
+		reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+		/* Start AUX transaction */
+		retval = analogix_dp_start_aux_transaction(dp);
+		if (retval == 0)
+			break;
+
+		dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
+	}
+
+	return retval;
+}
+
+void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype)
+{
+	u32 reg;
+
+	reg = bwtype;
+	if ((bwtype == DP_LINK_BW_2_7) || (bwtype == DP_LINK_BW_1_62))
+		writel(reg, dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
+}
+
+void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
+	*bwtype = reg;
+}
+
+void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count)
+{
+	u32 reg;
+
+	reg = count;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LANE_COUNT_SET);
+}
+
+void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LANE_COUNT_SET);
+	*count = reg;
+}
+
+void analogix_dp_enable_enhanced_mode(struct analogix_dp_device *dp,
+				      bool enable)
+{
+	u32 reg;
+
+	if (enable) {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+		reg |= ENHANCED;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+	} else {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+		reg &= ~ENHANCED;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+	}
+}
+
+void analogix_dp_set_training_pattern(struct analogix_dp_device *dp,
+				      enum pattern_set pattern)
+{
+	u32 reg;
+
+	switch (pattern) {
+	case PRBS7:
+		reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
+		writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+		break;
+	case D10_2:
+		reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
+		writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+		break;
+	case TRAINING_PTN1:
+		reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
+		writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+		break;
+	case TRAINING_PTN2:
+		reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
+		writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+		break;
+	case DP_NONE:
+		reg = SCRAMBLING_ENABLE |
+			LINK_QUAL_PATTERN_SET_DISABLE |
+			SW_TRAINING_PATTERN_SET_NORMAL;
+		writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+		break;
+	default:
+		break;
+	}
+}
+
+void analogix_dp_set_lane0_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+	reg &= ~PRE_EMPHASIS_SET_MASK;
+	reg |= level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane1_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+	reg &= ~PRE_EMPHASIS_SET_MASK;
+	reg |= level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane2_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+	reg &= ~PRE_EMPHASIS_SET_MASK;
+	reg |= level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane3_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+	reg &= ~PRE_EMPHASIS_SET_MASK;
+	reg |= level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane0_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane1_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane2_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane3_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+}
+
+u32 analogix_dp_get_lane0_link_training(struct analogix_dp_device *dp)
+{
+	return readl(dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+}
+
+u32 analogix_dp_get_lane1_link_training(struct analogix_dp_device *dp)
+{
+	return readl(dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+}
+
+u32 analogix_dp_get_lane2_link_training(struct analogix_dp_device *dp)
+{
+	return readl(dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+}
+
+u32 analogix_dp_get_lane3_link_training(struct analogix_dp_device *dp)
+{
+	return readl(dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_reset_macro(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_PHY_TEST);
+	reg |= MACRO_RST;
+	writel(reg, dp->reg_base + ANALOGIX_DP_PHY_TEST);
+
+	/* 10 us is the minimum reset time. */
+	usleep_range(10, 20);
+
+	reg &= ~MACRO_RST;
+	writel(reg, dp->reg_base + ANALOGIX_DP_PHY_TEST);
+}
+
+void analogix_dp_init_video(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_1);
+
+	reg = 0x0;
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+
+	reg = CHA_CRI(4) | CHA_CTRL;
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+
+	reg = 0x0;
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+
+	reg = VID_HRES_TH(2) | VID_VRES_TH(0);
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_8);
+}
+
+void analogix_dp_set_video_color_format(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* Configure the input color depth, color space, dynamic range */
+	reg = (dp->video_info.dynamic_range << IN_D_RANGE_SHIFT) |
+		(dp->video_info.color_depth << IN_BPC_SHIFT) |
+		(dp->video_info.color_space << IN_COLOR_F_SHIFT);
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_2);
+
+	/* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+	reg &= ~IN_YC_COEFFI_MASK;
+	if (dp->video_info.ycbcr_coeff)
+		reg |= IN_YC_COEFFI_ITU709;
+	else
+		reg |= IN_YC_COEFFI_ITU601;
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+}
+
+int analogix_dp_is_slave_video_stream_clock_on(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+
+	if (!(reg & DET_STA)) {
+		dev_dbg(dp->dev, "Input stream clock not detected.\n");
+		return -EINVAL;
+	}
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+	dev_dbg(dp->dev, "wait SYS_CTL_2.\n");
+
+	if (reg & CHA_STA) {
+		dev_dbg(dp->dev, "Input stream clk is changing\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void analogix_dp_set_video_cr_mn(struct analogix_dp_device *dp,
+				 enum clock_recovery_m_value_type type,
+				 u32 m_value, u32 n_value)
+{
+	u32 reg;
+
+	if (type == REGISTER_M) {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+		reg |= FIX_M_VID;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+		reg = m_value & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_M_VID_0);
+		reg = (m_value >> 8) & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_M_VID_1);
+		reg = (m_value >> 16) & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_M_VID_2);
+
+		reg = n_value & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_N_VID_0);
+		reg = (n_value >> 8) & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_N_VID_1);
+		reg = (n_value >> 16) & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_N_VID_2);
+	} else  {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+		reg &= ~FIX_M_VID;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+
+		writel(0x00, dp->reg_base + ANALOGIX_DP_N_VID_0);
+		writel(0x80, dp->reg_base + ANALOGIX_DP_N_VID_1);
+		writel(0x00, dp->reg_base + ANALOGIX_DP_N_VID_2);
+	}
+}
+
+void analogix_dp_set_video_timing_mode(struct analogix_dp_device *dp, u32 type)
+{
+	u32 reg;
+
+	if (type == VIDEO_TIMING_FROM_CAPTURE) {
+		reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+		reg &= ~FORMAT_SEL;
+		writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+	} else {
+		reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+		reg |= FORMAT_SEL;
+		writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+	}
+}
+
+void analogix_dp_enable_video_master(struct analogix_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable) {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+		reg &= ~VIDEO_MODE_MASK;
+		reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+	} else {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+		reg &= ~VIDEO_MODE_MASK;
+		reg |= VIDEO_MODE_SLAVE_MODE;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+	}
+}
+
+void analogix_dp_start_video(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+	reg |= VIDEO_EN;
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+}
+
+int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	if (!(reg & STRM_VALID)) {
+		dev_dbg(dp->dev, "Input video stream is not detected.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
+		reg &= ~(RK_VID_CAP_FUNC_EN_N | RK_VID_FIFO_FUNC_EN_N);
+	} else {
+		reg &= ~(MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N);
+		reg |= MASTER_VID_FUNC_EN_N;
+	}
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+	reg &= ~INTERACE_SCAN_CFG;
+	reg |= (dp->video_info.interlaced << 2);
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+	reg &= ~VSYNC_POLARITY_CFG;
+	reg |= (dp->video_info.v_sync_polarity << 1);
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+	reg &= ~HSYNC_POLARITY_CFG;
+	reg |= (dp->video_info.h_sync_polarity << 0);
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+
+	reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
+	writel(reg, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+}
+
+void analogix_dp_enable_scrambling(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+	reg &= ~SCRAMBLING_DISABLE;
+	writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+}
+
+void analogix_dp_disable_scrambling(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+	reg |= SCRAMBLING_DISABLE;
+	writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+}
+
+void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp)
+{
+	writel(PSR_VID_CRC_ENABLE, dp->reg_base + ANALOGIX_DP_CRC_CON);
+}
+
+static ssize_t analogix_dp_get_psr_status(struct analogix_dp_device *dp)
+{
+	ssize_t val;
+	u8 status;
+
+	val = drm_dp_dpcd_readb(&dp->aux, DP_PSR_STATUS, &status);
+	if (val < 0) {
+		dev_err(dp->dev, "PSR_STATUS read failed ret=%zd", val);
+		return val;
+	}
+	return status;
+}
+
+int analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
+			     struct dp_sdp *vsc, bool blocking)
+{
+	unsigned int val;
+	int ret;
+	ssize_t psr_status;
+
+	/* don't send info frame */
+	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	val &= ~IF_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+
+	/* configure single frame update mode */
+	writel(PSR_FRAME_UP_TYPE_BURST | PSR_CRC_SEL_HARDWARE,
+	       dp->reg_base + ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL);
+
+	/* configure VSC HB0~HB3 */
+	writel(vsc->sdp_header.HB0, dp->reg_base + ANALOGIX_DP_SPD_HB0);
+	writel(vsc->sdp_header.HB1, dp->reg_base + ANALOGIX_DP_SPD_HB1);
+	writel(vsc->sdp_header.HB2, dp->reg_base + ANALOGIX_DP_SPD_HB2);
+	writel(vsc->sdp_header.HB3, dp->reg_base + ANALOGIX_DP_SPD_HB3);
+
+	/* configure reused VSC PB0~PB3, magic number from vendor */
+	writel(0x00, dp->reg_base + ANALOGIX_DP_SPD_PB0);
+	writel(0x16, dp->reg_base + ANALOGIX_DP_SPD_PB1);
+	writel(0xCE, dp->reg_base + ANALOGIX_DP_SPD_PB2);
+	writel(0x5D, dp->reg_base + ANALOGIX_DP_SPD_PB3);
+
+	/* configure DB0 / DB1 values */
+	writel(vsc->db[0], dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB0);
+	writel(vsc->db[1], dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB1);
+
+	/* set reuse spd inforframe */
+	val = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+	val |= REUSE_SPD_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+
+	/* mark info frame update */
+	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	val = (val | IF_UP) & ~IF_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+
+	/* send info frame */
+	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	val |= IF_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+
+	if (!blocking)
+		return 0;
+
+	/*
+	 * db[1]!=0: entering PSR, wait for fully active remote frame buffer.
+	 * db[1]==0: exiting PSR, wait for either
+	 *  (a) ACTIVE_RESYNC - the sink "must display the
+	 *      incoming active frames from the Source device with no visible
+	 *      glitches and/or artifacts", even though timings may still be
+	 *      re-synchronizing; or
+	 *  (b) INACTIVE - the transition is fully complete.
+	 */
+	ret = readx_poll_timeout(analogix_dp_get_psr_status, dp, psr_status,
+		psr_status >= 0 &&
+		((vsc->db[1] && psr_status == DP_PSR_SINK_ACTIVE_RFB) ||
+		(!vsc->db[1] && (psr_status == DP_PSR_SINK_ACTIVE_RESYNC ||
+				 psr_status == DP_PSR_SINK_INACTIVE))),
+		1500, DP_TIMEOUT_PSR_LOOP_MS * 1000);
+	if (ret) {
+		dev_warn(dp->dev, "Failed to apply PSR %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
+			     struct drm_dp_aux_msg *msg)
+{
+	u32 reg;
+	u32 status_reg;
+	u8 *buffer = msg->buffer;
+	unsigned int i;
+	int num_transferred = 0;
+	int ret;
+
+	/* Buffer size of AUX CH is 16 bytes */
+	if (WARN_ON(msg->size > 16))
+		return -E2BIG;
+
+	/* Clear AUX CH data buffer */
+	reg = BUF_CLR;
+	writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+	switch (msg->request & ~DP_AUX_I2C_MOT) {
+	case DP_AUX_I2C_WRITE:
+		reg = AUX_TX_COMM_WRITE | AUX_TX_COMM_I2C_TRANSACTION;
+		if (msg->request & DP_AUX_I2C_MOT)
+			reg |= AUX_TX_COMM_MOT;
+		break;
+
+	case DP_AUX_I2C_READ:
+		reg = AUX_TX_COMM_READ | AUX_TX_COMM_I2C_TRANSACTION;
+		if (msg->request & DP_AUX_I2C_MOT)
+			reg |= AUX_TX_COMM_MOT;
+		break;
+
+	case DP_AUX_NATIVE_WRITE:
+		reg = AUX_TX_COMM_WRITE | AUX_TX_COMM_DP_TRANSACTION;
+		break;
+
+	case DP_AUX_NATIVE_READ:
+		reg = AUX_TX_COMM_READ | AUX_TX_COMM_DP_TRANSACTION;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	reg |= AUX_LENGTH(msg->size);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+	/* Select DPCD device address */
+	reg = AUX_ADDR_7_0(msg->address);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+	reg = AUX_ADDR_15_8(msg->address);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+	reg = AUX_ADDR_19_16(msg->address);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+	if (!(msg->request & DP_AUX_I2C_READ)) {
+		for (i = 0; i < msg->size; i++) {
+			reg = buffer[i];
+			writel(reg, dp->reg_base + ANALOGIX_DP_BUF_DATA_0 +
+			       4 * i);
+			num_transferred++;
+		}
+	}
+
+	/* Enable AUX CH operation */
+	reg = AUX_EN;
+
+	/* Zero-sized messages specify address-only transactions. */
+	if (msg->size < 1)
+		reg |= ADDR_ONLY;
+
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+
+	ret = readx_poll_timeout(readl, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2,
+				 reg, !(reg & AUX_EN), 25, 500 * 1000);
+	if (ret) {
+		dev_err(dp->dev, "AUX CH enable timeout!\n");
+		goto aux_error;
+	}
+
+	/* TODO: Wait for an interrupt instead of looping? */
+	/* Is AUX CH command reply received? */
+	ret = readx_poll_timeout(readl, dp->reg_base + ANALOGIX_DP_INT_STA,
+				 reg, reg & RPLY_RECEIV, 10, 20 * 1000);
+	if (ret) {
+		dev_err(dp->dev, "AUX CH cmd reply timeout!\n");
+		goto aux_error;
+	}
+
+	/* Clear interrupt source for AUX CH command reply */
+	writel(RPLY_RECEIV, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+	/* Clear interrupt source for AUX CH access error */
+	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+	status_reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_STA);
+	if ((reg & AUX_ERR) || (status_reg & AUX_STATUS_MASK)) {
+		writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+		dev_warn(dp->dev, "AUX CH error happened: %#x (%d)\n",
+			 status_reg & AUX_STATUS_MASK, !!(reg & AUX_ERR));
+		goto aux_error;
+	}
+
+	if (msg->request & DP_AUX_I2C_READ) {
+		for (i = 0; i < msg->size; i++) {
+			reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0 +
+				    4 * i);
+			buffer[i] = (unsigned char)reg;
+			num_transferred++;
+		}
+	}
+
+	/* Check if Rx sends defer */
+	reg = readl(dp->reg_base + ANALOGIX_DP_AUX_RX_COMM);
+	if (reg == AUX_RX_COMM_AUX_DEFER)
+		msg->reply = DP_AUX_NATIVE_REPLY_DEFER;
+	else if (reg == AUX_RX_COMM_I2C_DEFER)
+		msg->reply = DP_AUX_I2C_REPLY_DEFER;
+	else if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_I2C_WRITE ||
+		 (msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_I2C_READ)
+		msg->reply = DP_AUX_I2C_REPLY_ACK;
+	else if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_WRITE ||
+		 (msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_READ)
+		msg->reply = DP_AUX_NATIVE_REPLY_ACK;
+
+	return num_transferred > 0 ? num_transferred : -EBUSY;
+
+aux_error:
+	/* if aux err happen, reset aux */
+	analogix_dp_init_aux(dp);
+
+	return -EREMOTEIO;
+}
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
new file mode 100644
index 000000000..e284ee8da
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -0,0 +1,417 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Register definition file for Analogix DP core driver
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ */
+
+#ifndef _ANALOGIX_DP_REG_H
+#define _ANALOGIX_DP_REG_H
+
+#define ANALOGIX_DP_TX_SW_RESET			0x14
+#define ANALOGIX_DP_FUNC_EN_1			0x18
+#define ANALOGIX_DP_FUNC_EN_2			0x1C
+#define ANALOGIX_DP_VIDEO_CTL_1			0x20
+#define ANALOGIX_DP_VIDEO_CTL_2			0x24
+#define ANALOGIX_DP_VIDEO_CTL_3			0x28
+
+#define ANALOGIX_DP_VIDEO_CTL_8			0x3C
+#define ANALOGIX_DP_VIDEO_CTL_10		0x44
+
+#define ANALOGIX_DP_SPDIF_AUDIO_CTL_0		0xD8
+
+#define ANALOGIX_DP_PLL_REG_1			0xfc
+#define ANALOGIX_DP_PLL_REG_2			0x9e4
+#define ANALOGIX_DP_PLL_REG_3			0x9e8
+#define ANALOGIX_DP_PLL_REG_4			0x9ec
+#define ANALOGIX_DP_PLL_REG_5			0xa00
+
+#define ANALOGIX_DP_PD				0x12c
+
+#define ANALOGIX_DP_IF_TYPE			0x244
+#define ANALOGIX_DP_IF_PKT_DB1			0x254
+#define ANALOGIX_DP_IF_PKT_DB2			0x258
+#define ANALOGIX_DP_SPD_HB0			0x2F8
+#define ANALOGIX_DP_SPD_HB1			0x2FC
+#define ANALOGIX_DP_SPD_HB2			0x300
+#define ANALOGIX_DP_SPD_HB3			0x304
+#define ANALOGIX_DP_SPD_PB0			0x308
+#define ANALOGIX_DP_SPD_PB1			0x30C
+#define ANALOGIX_DP_SPD_PB2			0x310
+#define ANALOGIX_DP_SPD_PB3			0x314
+#define ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL	0x318
+#define ANALOGIX_DP_VSC_SHADOW_DB0		0x31C
+#define ANALOGIX_DP_VSC_SHADOW_DB1		0x320
+
+#define ANALOGIX_DP_LANE_MAP			0x35C
+
+#define ANALOGIX_DP_ANALOG_CTL_1		0x370
+#define ANALOGIX_DP_ANALOG_CTL_2		0x374
+#define ANALOGIX_DP_ANALOG_CTL_3		0x378
+#define ANALOGIX_DP_PLL_FILTER_CTL_1		0x37C
+#define ANALOGIX_DP_TX_AMP_TUNING_CTL		0x380
+
+#define ANALOGIX_DP_AUX_HW_RETRY_CTL		0x390
+
+#define ANALOGIX_DP_COMMON_INT_STA_1		0x3C4
+#define ANALOGIX_DP_COMMON_INT_STA_2		0x3C8
+#define ANALOGIX_DP_COMMON_INT_STA_3		0x3CC
+#define ANALOGIX_DP_COMMON_INT_STA_4		0x3D0
+#define ANALOGIX_DP_INT_STA			0x3DC
+#define ANALOGIX_DP_COMMON_INT_MASK_1		0x3E0
+#define ANALOGIX_DP_COMMON_INT_MASK_2		0x3E4
+#define ANALOGIX_DP_COMMON_INT_MASK_3		0x3E8
+#define ANALOGIX_DP_COMMON_INT_MASK_4		0x3EC
+#define ANALOGIX_DP_INT_STA_MASK		0x3F8
+#define ANALOGIX_DP_INT_CTL			0x3FC
+
+#define ANALOGIX_DP_SYS_CTL_1			0x600
+#define ANALOGIX_DP_SYS_CTL_2			0x604
+#define ANALOGIX_DP_SYS_CTL_3			0x608
+#define ANALOGIX_DP_SYS_CTL_4			0x60C
+
+#define ANALOGIX_DP_PKT_SEND_CTL		0x640
+#define ANALOGIX_DP_HDCP_CTL			0x648
+
+#define ANALOGIX_DP_LINK_BW_SET			0x680
+#define ANALOGIX_DP_LANE_COUNT_SET		0x684
+#define ANALOGIX_DP_TRAINING_PTN_SET		0x688
+#define ANALOGIX_DP_LN0_LINK_TRAINING_CTL	0x68C
+#define ANALOGIX_DP_LN1_LINK_TRAINING_CTL	0x690
+#define ANALOGIX_DP_LN2_LINK_TRAINING_CTL	0x694
+#define ANALOGIX_DP_LN3_LINK_TRAINING_CTL	0x698
+
+#define ANALOGIX_DP_DEBUG_CTL			0x6C0
+#define ANALOGIX_DP_HPD_DEGLITCH_L		0x6C4
+#define ANALOGIX_DP_HPD_DEGLITCH_H		0x6C8
+#define ANALOGIX_DP_LINK_DEBUG_CTL		0x6E0
+
+#define ANALOGIX_DP_M_VID_0			0x700
+#define ANALOGIX_DP_M_VID_1			0x704
+#define ANALOGIX_DP_M_VID_2			0x708
+#define ANALOGIX_DP_N_VID_0			0x70C
+#define ANALOGIX_DP_N_VID_1			0x710
+#define ANALOGIX_DP_N_VID_2			0x714
+
+#define ANALOGIX_DP_PLL_CTL			0x71C
+#define ANALOGIX_DP_PHY_PD			0x720
+#define ANALOGIX_DP_PHY_TEST			0x724
+
+#define ANALOGIX_DP_VIDEO_FIFO_THRD		0x730
+#define ANALOGIX_DP_AUDIO_MARGIN		0x73C
+
+#define ANALOGIX_DP_M_VID_GEN_FILTER_TH		0x764
+#define ANALOGIX_DP_M_AUD_GEN_FILTER_TH		0x778
+#define ANALOGIX_DP_AUX_CH_STA			0x780
+#define ANALOGIX_DP_AUX_CH_DEFER_CTL		0x788
+#define ANALOGIX_DP_AUX_RX_COMM			0x78C
+#define ANALOGIX_DP_BUFFER_DATA_CTL		0x790
+#define ANALOGIX_DP_AUX_CH_CTL_1		0x794
+#define ANALOGIX_DP_AUX_ADDR_7_0		0x798
+#define ANALOGIX_DP_AUX_ADDR_15_8		0x79C
+#define ANALOGIX_DP_AUX_ADDR_19_16		0x7A0
+#define ANALOGIX_DP_AUX_CH_CTL_2		0x7A4
+
+#define ANALOGIX_DP_BUF_DATA_0			0x7C0
+
+#define ANALOGIX_DP_SOC_GENERAL_CTL		0x800
+
+#define ANALOGIX_DP_CRC_CON			0x890
+
+/* ANALOGIX_DP_TX_SW_RESET */
+#define RESET_DP_TX				(0x1 << 0)
+
+/* ANALOGIX_DP_FUNC_EN_1 */
+#define MASTER_VID_FUNC_EN_N			(0x1 << 7)
+#define RK_VID_CAP_FUNC_EN_N			(0x1 << 6)
+#define SLAVE_VID_FUNC_EN_N			(0x1 << 5)
+#define RK_VID_FIFO_FUNC_EN_N			(0x1 << 5)
+#define AUD_FIFO_FUNC_EN_N			(0x1 << 4)
+#define AUD_FUNC_EN_N				(0x1 << 3)
+#define HDCP_FUNC_EN_N				(0x1 << 2)
+#define CRC_FUNC_EN_N				(0x1 << 1)
+#define SW_FUNC_EN_N				(0x1 << 0)
+
+/* ANALOGIX_DP_FUNC_EN_2 */
+#define SSC_FUNC_EN_N				(0x1 << 7)
+#define AUX_FUNC_EN_N				(0x1 << 2)
+#define SERDES_FIFO_FUNC_EN_N			(0x1 << 1)
+#define LS_CLK_DOMAIN_FUNC_EN_N			(0x1 << 0)
+
+/* ANALOGIX_DP_VIDEO_CTL_1 */
+#define VIDEO_EN				(0x1 << 7)
+#define HDCP_VIDEO_MUTE				(0x1 << 6)
+
+/* ANALOGIX_DP_VIDEO_CTL_1 */
+#define IN_D_RANGE_MASK				(0x1 << 7)
+#define IN_D_RANGE_SHIFT			(7)
+#define IN_D_RANGE_CEA				(0x1 << 7)
+#define IN_D_RANGE_VESA				(0x0 << 7)
+#define IN_BPC_MASK				(0x7 << 4)
+#define IN_BPC_SHIFT				(4)
+#define IN_BPC_12_BITS				(0x3 << 4)
+#define IN_BPC_10_BITS				(0x2 << 4)
+#define IN_BPC_8_BITS				(0x1 << 4)
+#define IN_BPC_6_BITS				(0x0 << 4)
+#define IN_COLOR_F_MASK				(0x3 << 0)
+#define IN_COLOR_F_SHIFT			(0)
+#define IN_COLOR_F_YCBCR444			(0x2 << 0)
+#define IN_COLOR_F_YCBCR422			(0x1 << 0)
+#define IN_COLOR_F_RGB				(0x0 << 0)
+
+/* ANALOGIX_DP_VIDEO_CTL_3 */
+#define IN_YC_COEFFI_MASK			(0x1 << 7)
+#define IN_YC_COEFFI_SHIFT			(7)
+#define IN_YC_COEFFI_ITU709			(0x1 << 7)
+#define IN_YC_COEFFI_ITU601			(0x0 << 7)
+#define VID_CHK_UPDATE_TYPE_MASK		(0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_SHIFT		(4)
+#define VID_CHK_UPDATE_TYPE_1			(0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_0			(0x0 << 4)
+#define REUSE_SPD_EN				(0x1 << 3)
+
+/* ANALOGIX_DP_VIDEO_CTL_8 */
+#define VID_HRES_TH(x)				(((x) & 0xf) << 4)
+#define VID_VRES_TH(x)				(((x) & 0xf) << 0)
+
+/* ANALOGIX_DP_VIDEO_CTL_10 */
+#define FORMAT_SEL				(0x1 << 4)
+#define INTERACE_SCAN_CFG			(0x1 << 2)
+#define VSYNC_POLARITY_CFG			(0x1 << 1)
+#define HSYNC_POLARITY_CFG			(0x1 << 0)
+
+/* ANALOGIX_DP_PLL_REG_1 */
+#define REF_CLK_24M				(0x1 << 0)
+#define REF_CLK_27M				(0x0 << 0)
+#define REF_CLK_MASK				(0x1 << 0)
+
+/* ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL */
+#define PSR_FRAME_UP_TYPE_BURST			(0x1 << 0)
+#define PSR_FRAME_UP_TYPE_SINGLE		(0x0 << 0)
+#define PSR_CRC_SEL_HARDWARE			(0x1 << 1)
+#define PSR_CRC_SEL_MANUALLY			(0x0 << 1)
+
+/* ANALOGIX_DP_LANE_MAP */
+#define LANE3_MAP_LOGIC_LANE_0			(0x0 << 6)
+#define LANE3_MAP_LOGIC_LANE_1			(0x1 << 6)
+#define LANE3_MAP_LOGIC_LANE_2			(0x2 << 6)
+#define LANE3_MAP_LOGIC_LANE_3			(0x3 << 6)
+#define LANE2_MAP_LOGIC_LANE_0			(0x0 << 4)
+#define LANE2_MAP_LOGIC_LANE_1			(0x1 << 4)
+#define LANE2_MAP_LOGIC_LANE_2			(0x2 << 4)
+#define LANE2_MAP_LOGIC_LANE_3			(0x3 << 4)
+#define LANE1_MAP_LOGIC_LANE_0			(0x0 << 2)
+#define LANE1_MAP_LOGIC_LANE_1			(0x1 << 2)
+#define LANE1_MAP_LOGIC_LANE_2			(0x2 << 2)
+#define LANE1_MAP_LOGIC_LANE_3			(0x3 << 2)
+#define LANE0_MAP_LOGIC_LANE_0			(0x0 << 0)
+#define LANE0_MAP_LOGIC_LANE_1			(0x1 << 0)
+#define LANE0_MAP_LOGIC_LANE_2			(0x2 << 0)
+#define LANE0_MAP_LOGIC_LANE_3			(0x3 << 0)
+
+/* ANALOGIX_DP_ANALOG_CTL_1 */
+#define TX_TERMINAL_CTRL_50_OHM			(0x1 << 4)
+
+/* ANALOGIX_DP_ANALOG_CTL_2 */
+#define SEL_24M					(0x1 << 3)
+#define TX_DVDD_BIT_1_0625V			(0x4 << 0)
+
+/* ANALOGIX_DP_ANALOG_CTL_3 */
+#define DRIVE_DVDD_BIT_1_0625V			(0x4 << 5)
+#define VCO_BIT_600_MICRO			(0x5 << 0)
+
+/* ANALOGIX_DP_PLL_FILTER_CTL_1 */
+#define PD_RING_OSC				(0x1 << 6)
+#define AUX_TERMINAL_CTRL_50_OHM		(0x2 << 4)
+#define TX_CUR1_2X				(0x1 << 2)
+#define TX_CUR_16_MA				(0x3 << 0)
+
+/* ANALOGIX_DP_TX_AMP_TUNING_CTL */
+#define CH3_AMP_400_MV				(0x0 << 24)
+#define CH2_AMP_400_MV				(0x0 << 16)
+#define CH1_AMP_400_MV				(0x0 << 8)
+#define CH0_AMP_400_MV				(0x0 << 0)
+
+/* ANALOGIX_DP_AUX_HW_RETRY_CTL */
+#define AUX_BIT_PERIOD_EXPECTED_DELAY(x)	(((x) & 0x7) << 8)
+#define AUX_HW_RETRY_INTERVAL_MASK		(0x3 << 3)
+#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS	(0x0 << 3)
+#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS	(0x1 << 3)
+#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS	(0x2 << 3)
+#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS	(0x3 << 3)
+#define AUX_HW_RETRY_COUNT_SEL(x)		(((x) & 0x7) << 0)
+
+/* ANALOGIX_DP_COMMON_INT_STA_1 */
+#define VSYNC_DET				(0x1 << 7)
+#define PLL_LOCK_CHG				(0x1 << 6)
+#define SPDIF_ERR				(0x1 << 5)
+#define SPDIF_UNSTBL				(0x1 << 4)
+#define VID_FORMAT_CHG				(0x1 << 3)
+#define AUD_CLK_CHG				(0x1 << 2)
+#define VID_CLK_CHG				(0x1 << 1)
+#define SW_INT					(0x1 << 0)
+
+/* ANALOGIX_DP_COMMON_INT_STA_2 */
+#define ENC_EN_CHG				(0x1 << 6)
+#define HW_BKSV_RDY				(0x1 << 3)
+#define HW_SHA_DONE				(0x1 << 2)
+#define HW_AUTH_STATE_CHG			(0x1 << 1)
+#define HW_AUTH_DONE				(0x1 << 0)
+
+/* ANALOGIX_DP_COMMON_INT_STA_3 */
+#define AFIFO_UNDER				(0x1 << 7)
+#define AFIFO_OVER				(0x1 << 6)
+#define R0_CHK_FLAG				(0x1 << 5)
+
+/* ANALOGIX_DP_COMMON_INT_STA_4 */
+#define PSR_ACTIVE				(0x1 << 7)
+#define PSR_INACTIVE				(0x1 << 6)
+#define SPDIF_BI_PHASE_ERR			(0x1 << 5)
+#define HOTPLUG_CHG				(0x1 << 2)
+#define HPD_LOST				(0x1 << 1)
+#define PLUG					(0x1 << 0)
+
+/* ANALOGIX_DP_INT_STA */
+#define INT_HPD					(0x1 << 6)
+#define HW_TRAINING_FINISH			(0x1 << 5)
+#define RPLY_RECEIV				(0x1 << 1)
+#define AUX_ERR					(0x1 << 0)
+
+/* ANALOGIX_DP_INT_CTL */
+#define SOFT_INT_CTRL				(0x1 << 2)
+#define INT_POL1				(0x1 << 1)
+#define INT_POL0				(0x1 << 0)
+
+/* ANALOGIX_DP_SYS_CTL_1 */
+#define DET_STA					(0x1 << 2)
+#define FORCE_DET				(0x1 << 1)
+#define DET_CTRL				(0x1 << 0)
+
+/* ANALOGIX_DP_SYS_CTL_2 */
+#define CHA_CRI(x)				(((x) & 0xf) << 4)
+#define CHA_STA					(0x1 << 2)
+#define FORCE_CHA				(0x1 << 1)
+#define CHA_CTRL				(0x1 << 0)
+
+/* ANALOGIX_DP_SYS_CTL_3 */
+#define HPD_STATUS				(0x1 << 6)
+#define F_HPD					(0x1 << 5)
+#define HPD_CTRL				(0x1 << 4)
+#define HDCP_RDY				(0x1 << 3)
+#define STRM_VALID				(0x1 << 2)
+#define F_VALID					(0x1 << 1)
+#define VALID_CTRL				(0x1 << 0)
+
+/* ANALOGIX_DP_SYS_CTL_4 */
+#define FIX_M_AUD				(0x1 << 4)
+#define ENHANCED				(0x1 << 3)
+#define FIX_M_VID				(0x1 << 2)
+#define M_VID_UPDATE_CTRL			(0x3 << 0)
+
+/* ANALOGIX_DP_TRAINING_PTN_SET */
+#define SCRAMBLER_TYPE				(0x1 << 9)
+#define HW_LINK_TRAINING_PATTERN		(0x1 << 8)
+#define SCRAMBLING_DISABLE			(0x1 << 5)
+#define SCRAMBLING_ENABLE			(0x0 << 5)
+#define LINK_QUAL_PATTERN_SET_MASK		(0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_PRBS7		(0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_D10_2		(0x1 << 2)
+#define LINK_QUAL_PATTERN_SET_DISABLE		(0x0 << 2)
+#define SW_TRAINING_PATTERN_SET_MASK		(0x3 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN2		(0x2 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN1		(0x1 << 0)
+#define SW_TRAINING_PATTERN_SET_NORMAL		(0x0 << 0)
+
+/* ANALOGIX_DP_LN0_LINK_TRAINING_CTL */
+#define PRE_EMPHASIS_SET_MASK			(0x3 << 3)
+#define PRE_EMPHASIS_SET_SHIFT			(3)
+
+/* ANALOGIX_DP_DEBUG_CTL */
+#define PLL_LOCK				(0x1 << 4)
+#define F_PLL_LOCK				(0x1 << 3)
+#define PLL_LOCK_CTRL				(0x1 << 2)
+#define PN_INV					(0x1 << 0)
+
+/* ANALOGIX_DP_PLL_CTL */
+#define DP_PLL_PD				(0x1 << 7)
+#define DP_PLL_RESET				(0x1 << 6)
+#define DP_PLL_LOOP_BIT_DEFAULT			(0x1 << 4)
+#define DP_PLL_REF_BIT_1_1250V			(0x5 << 0)
+#define DP_PLL_REF_BIT_1_2500V			(0x7 << 0)
+
+/* ANALOGIX_DP_PHY_PD */
+#define DP_INC_BG				(0x1 << 7)
+#define DP_EXP_BG				(0x1 << 6)
+#define DP_PHY_PD				(0x1 << 5)
+#define RK_AUX_PD				(0x1 << 5)
+#define AUX_PD					(0x1 << 4)
+#define RK_PLL_PD				(0x1 << 4)
+#define CH3_PD					(0x1 << 3)
+#define CH2_PD					(0x1 << 2)
+#define CH1_PD					(0x1 << 1)
+#define CH0_PD					(0x1 << 0)
+#define DP_ALL_PD				(0xff)
+
+/* ANALOGIX_DP_PHY_TEST */
+#define MACRO_RST				(0x1 << 5)
+#define CH1_TEST				(0x1 << 1)
+#define CH0_TEST				(0x1 << 0)
+
+/* ANALOGIX_DP_AUX_CH_STA */
+#define AUX_BUSY				(0x1 << 4)
+#define AUX_STATUS_MASK				(0xf << 0)
+
+/* ANALOGIX_DP_AUX_CH_DEFER_CTL */
+#define DEFER_CTRL_EN				(0x1 << 7)
+#define DEFER_COUNT(x)				(((x) & 0x7f) << 0)
+
+/* ANALOGIX_DP_AUX_RX_COMM */
+#define AUX_RX_COMM_I2C_DEFER			(0x2 << 2)
+#define AUX_RX_COMM_AUX_DEFER			(0x2 << 0)
+
+/* ANALOGIX_DP_BUFFER_DATA_CTL */
+#define BUF_CLR					(0x1 << 7)
+#define BUF_DATA_COUNT(x)			(((x) & 0x1f) << 0)
+
+/* ANALOGIX_DP_AUX_CH_CTL_1 */
+#define AUX_LENGTH(x)				(((x - 1) & 0xf) << 4)
+#define AUX_TX_COMM_MASK			(0xf << 0)
+#define AUX_TX_COMM_DP_TRANSACTION		(0x1 << 3)
+#define AUX_TX_COMM_I2C_TRANSACTION		(0x0 << 3)
+#define AUX_TX_COMM_MOT				(0x1 << 2)
+#define AUX_TX_COMM_WRITE			(0x0 << 0)
+#define AUX_TX_COMM_READ			(0x1 << 0)
+
+/* ANALOGIX_DP_AUX_ADDR_7_0 */
+#define AUX_ADDR_7_0(x)				(((x) >> 0) & 0xff)
+
+/* ANALOGIX_DP_AUX_ADDR_15_8 */
+#define AUX_ADDR_15_8(x)			(((x) >> 8) & 0xff)
+
+/* ANALOGIX_DP_AUX_ADDR_19_16 */
+#define AUX_ADDR_19_16(x)			(((x) >> 16) & 0x0f)
+
+/* ANALOGIX_DP_AUX_CH_CTL_2 */
+#define ADDR_ONLY				(0x1 << 1)
+#define AUX_EN					(0x1 << 0)
+
+/* ANALOGIX_DP_SOC_GENERAL_CTL */
+#define AUDIO_MODE_SPDIF_MODE			(0x1 << 8)
+#define AUDIO_MODE_MASTER_MODE			(0x0 << 8)
+#define MASTER_VIDEO_INTERLACE_EN		(0x1 << 4)
+#define VIDEO_MASTER_CLK_SEL			(0x1 << 2)
+#define VIDEO_MASTER_MODE_EN			(0x1 << 1)
+#define VIDEO_MODE_MASK				(0x1 << 0)
+#define VIDEO_MODE_SLAVE_MODE			(0x1 << 0)
+#define VIDEO_MODE_MASTER_MODE			(0x0 << 0)
+
+/* ANALOGIX_DP_PKT_SEND_CTL */
+#define IF_UP					(0x1 << 4)
+#define IF_EN					(0x1 << 0)
+
+/* ANALOGIX_DP_CRC_CON */
+#define PSR_VID_CRC_FLUSH			(0x1 << 2)
+#define PSR_VID_CRC_ENABLE			(0x1 << 0)
+
+#endif /* _ANALOGIX_DP_REG_H */