Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1109 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
new file mode 100644
index 000000000..b915dfcff
--- /dev/null
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -0,0 +1,1109 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Aspeed 24XX/25XX I2C Controller.
+ *
+ *  Copyright (C) 2012-2017 ASPEED Technology Inc.
+ *  Copyright 2017 IBM Corporation
+ *  Copyright 2017 Google, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+/* I2C Register */
+#define ASPEED_I2C_FUN_CTRL_REG				0x00
+#define ASPEED_I2C_AC_TIMING_REG1			0x04
+#define ASPEED_I2C_AC_TIMING_REG2			0x08
+#define ASPEED_I2C_INTR_CTRL_REG			0x0c
+#define ASPEED_I2C_INTR_STS_REG				0x10
+#define ASPEED_I2C_CMD_REG				0x14
+#define ASPEED_I2C_DEV_ADDR_REG				0x18
+#define ASPEED_I2C_BYTE_BUF_REG				0x20
+
+/* Global Register Definition */
+/* 0x00 : I2C Interrupt Status Register  */
+/* 0x08 : I2C Interrupt Target Assignment  */
+
+/* Device Register Definition */
+/* 0x00 : I2CD Function Control Register  */
+#define ASPEED_I2CD_MULTI_MASTER_DIS			BIT(15)
+#define ASPEED_I2CD_SDA_DRIVE_1T_EN			BIT(8)
+#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN			BIT(7)
+#define ASPEED_I2CD_M_HIGH_SPEED_EN			BIT(6)
+#define ASPEED_I2CD_SLAVE_EN				BIT(1)
+#define ASPEED_I2CD_MASTER_EN				BIT(0)
+
+/* 0x04 : I2CD Clock and AC Timing Control Register #1 */
+#define ASPEED_I2CD_TIME_TBUF_MASK			GENMASK(31, 28)
+#define ASPEED_I2CD_TIME_THDSTA_MASK			GENMASK(27, 24)
+#define ASPEED_I2CD_TIME_TACST_MASK			GENMASK(23, 20)
+#define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT			16
+#define ASPEED_I2CD_TIME_SCL_HIGH_MASK			GENMASK(19, 16)
+#define ASPEED_I2CD_TIME_SCL_LOW_SHIFT			12
+#define ASPEED_I2CD_TIME_SCL_LOW_MASK			GENMASK(15, 12)
+#define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK		GENMASK(3, 0)
+#define ASPEED_I2CD_TIME_SCL_REG_MAX			GENMASK(3, 0)
+/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
+#define ASPEED_NO_TIMEOUT_CTRL				0
+
+/* 0x0c : I2CD Interrupt Control Register &
+ * 0x10 : I2CD Interrupt Status Register
+ *
+ * These share bit definitions, so use the same values for the enable &
+ * status bits.
+ */
+#define ASPEED_I2CD_INTR_RECV_MASK			0xf000ffff
+#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
+#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
+#define ASPEED_I2CD_INTR_SLAVE_MATCH			BIT(7)
+#define ASPEED_I2CD_INTR_SCL_TIMEOUT			BIT(6)
+#define ASPEED_I2CD_INTR_ABNORMAL			BIT(5)
+#define ASPEED_I2CD_INTR_NORMAL_STOP			BIT(4)
+#define ASPEED_I2CD_INTR_ARBIT_LOSS			BIT(3)
+#define ASPEED_I2CD_INTR_RX_DONE			BIT(2)
+#define ASPEED_I2CD_INTR_TX_NAK				BIT(1)
+#define ASPEED_I2CD_INTR_TX_ACK				BIT(0)
+#define ASPEED_I2CD_INTR_MASTER_ERRORS					       \
+		(ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |			       \
+		 ASPEED_I2CD_INTR_SCL_TIMEOUT |				       \
+		 ASPEED_I2CD_INTR_ABNORMAL |				       \
+		 ASPEED_I2CD_INTR_ARBIT_LOSS)
+#define ASPEED_I2CD_INTR_ALL						       \
+		(ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |			       \
+		 ASPEED_I2CD_INTR_BUS_RECOVER_DONE |			       \
+		 ASPEED_I2CD_INTR_SCL_TIMEOUT |				       \
+		 ASPEED_I2CD_INTR_ABNORMAL |				       \
+		 ASPEED_I2CD_INTR_NORMAL_STOP |				       \
+		 ASPEED_I2CD_INTR_ARBIT_LOSS |				       \
+		 ASPEED_I2CD_INTR_RX_DONE |				       \
+		 ASPEED_I2CD_INTR_TX_NAK |				       \
+		 ASPEED_I2CD_INTR_TX_ACK)
+
+/* 0x14 : I2CD Command/Status Register   */
+#define ASPEED_I2CD_SCL_LINE_STS			BIT(18)
+#define ASPEED_I2CD_SDA_LINE_STS			BIT(17)
+#define ASPEED_I2CD_BUS_BUSY_STS			BIT(16)
+#define ASPEED_I2CD_BUS_RECOVER_CMD			BIT(11)
+
+/* Command Bit */
+#define ASPEED_I2CD_M_STOP_CMD				BIT(5)
+#define ASPEED_I2CD_M_S_RX_CMD_LAST			BIT(4)
+#define ASPEED_I2CD_M_RX_CMD				BIT(3)
+#define ASPEED_I2CD_S_TX_CMD				BIT(2)
+#define ASPEED_I2CD_M_TX_CMD				BIT(1)
+#define ASPEED_I2CD_M_START_CMD				BIT(0)
+#define ASPEED_I2CD_MASTER_CMDS_MASK					       \
+		(ASPEED_I2CD_M_STOP_CMD |				       \
+		 ASPEED_I2CD_M_S_RX_CMD_LAST |				       \
+		 ASPEED_I2CD_M_RX_CMD |					       \
+		 ASPEED_I2CD_M_TX_CMD |					       \
+		 ASPEED_I2CD_M_START_CMD)
+
+/* 0x18 : I2CD Slave Device Address Register   */
+#define ASPEED_I2CD_DEV_ADDR_MASK			GENMASK(6, 0)
+
+enum aspeed_i2c_master_state {
+	ASPEED_I2C_MASTER_INACTIVE,
+	ASPEED_I2C_MASTER_PENDING,
+	ASPEED_I2C_MASTER_START,
+	ASPEED_I2C_MASTER_TX_FIRST,
+	ASPEED_I2C_MASTER_TX,
+	ASPEED_I2C_MASTER_RX_FIRST,
+	ASPEED_I2C_MASTER_RX,
+	ASPEED_I2C_MASTER_STOP,
+};
+
+enum aspeed_i2c_slave_state {
+	ASPEED_I2C_SLAVE_INACTIVE,
+	ASPEED_I2C_SLAVE_START,
+	ASPEED_I2C_SLAVE_READ_REQUESTED,
+	ASPEED_I2C_SLAVE_READ_PROCESSED,
+	ASPEED_I2C_SLAVE_WRITE_REQUESTED,
+	ASPEED_I2C_SLAVE_WRITE_RECEIVED,
+	ASPEED_I2C_SLAVE_STOP,
+};
+
+struct aspeed_i2c_bus {
+	struct i2c_adapter		adap;
+	struct device			*dev;
+	void __iomem			*base;
+	struct reset_control		*rst;
+	/* Synchronizes I/O mem access to base. */
+	spinlock_t			lock;
+	struct completion		cmd_complete;
+	u32				(*get_clk_reg_val)(struct device *dev,
+							   u32 divisor);
+	unsigned long			parent_clk_frequency;
+	u32				bus_frequency;
+	/* Transaction state. */
+	enum aspeed_i2c_master_state	master_state;
+	struct i2c_msg			*msgs;
+	size_t				buf_index;
+	size_t				msgs_index;
+	size_t				msgs_count;
+	bool				send_stop;
+	int				cmd_err;
+	/* Protected only by i2c_lock_bus */
+	int				master_xfer_result;
+	/* Multi-master */
+	bool				multi_master;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	struct i2c_client		*slave;
+	enum aspeed_i2c_slave_state	slave_state;
+#endif /* CONFIG_I2C_SLAVE */
+};
+
+static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
+
+static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
+{
+	unsigned long time_left, flags;
+	int ret = 0;
+	u32 command;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+
+	if (command & ASPEED_I2CD_SDA_LINE_STS) {
+		/* Bus is idle: no recovery needed. */
+		if (command & ASPEED_I2CD_SCL_LINE_STS)
+			goto out;
+		dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n",
+			command);
+
+		reinit_completion(&bus->cmd_complete);
+		writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		time_left = wait_for_completion_timeout(
+				&bus->cmd_complete, bus->adap.timeout);
+
+		spin_lock_irqsave(&bus->lock, flags);
+		if (time_left == 0)
+			goto reset_out;
+		else if (bus->cmd_err)
+			goto reset_out;
+		/* Recovery failed. */
+		else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+			   ASPEED_I2CD_SCL_LINE_STS))
+			goto reset_out;
+	/* Bus error. */
+	} else {
+		dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n",
+			command);
+
+		reinit_completion(&bus->cmd_complete);
+		/* Writes 1 to 8 SCL clock cycles until SDA is released. */
+		writel(ASPEED_I2CD_BUS_RECOVER_CMD,
+		       bus->base + ASPEED_I2C_CMD_REG);
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		time_left = wait_for_completion_timeout(
+				&bus->cmd_complete, bus->adap.timeout);
+
+		spin_lock_irqsave(&bus->lock, flags);
+		if (time_left == 0)
+			goto reset_out;
+		else if (bus->cmd_err)
+			goto reset_out;
+		/* Recovery failed. */
+		else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+			   ASPEED_I2CD_SDA_LINE_STS))
+			goto reset_out;
+	}
+
+out:
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return ret;
+
+reset_out:
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return aspeed_i2c_reset(bus);
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
+{
+	u32 command, irq_handled = 0;
+	struct i2c_client *slave = bus->slave;
+	u8 value;
+
+	if (!slave)
+		return 0;
+
+	/*
+	 * Handle stop conditions early, prior to SLAVE_MATCH. Some masters may drive
+	 * transfers with low enough latency between the nak/stop phase of the current
+	 * command and the start/address phase of the following command that the
+	 * interrupts are coalesced by the time we process them.
+	 */
+	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
+		irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
+	    bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
+		irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	/* Propagate any stop conditions to the slave implementation. */
+	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
+		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+		bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
+	}
+
+	/*
+	 * Now that we've dealt with any potentially coalesced stop conditions,
+	 * address any start conditions.
+	 */
+	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
+		irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH;
+		bus->slave_state = ASPEED_I2C_SLAVE_START;
+	}
+
+	/*
+	 * If the slave has been stopped and not started then slave interrupt
+	 * handling is complete.
+	 */
+	if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
+		return irq_handled;
+
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
+		irq_status, command);
+
+	/* Slave was sent something. */
+	if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
+		value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
+		/* Handle address frame. */
+		if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
+			if (value & 0x1)
+				bus->slave_state =
+						ASPEED_I2C_SLAVE_READ_REQUESTED;
+			else
+				bus->slave_state =
+						ASPEED_I2C_SLAVE_WRITE_REQUESTED;
+		}
+		irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
+	}
+
+	switch (bus->slave_state) {
+	case ASPEED_I2C_SLAVE_READ_REQUESTED:
+		if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK))
+			dev_err(bus->dev, "Unexpected ACK on read request.\n");
+		bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
+		i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+		writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+		writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		break;
+	case ASPEED_I2C_SLAVE_READ_PROCESSED:
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+			dev_err(bus->dev,
+				"Expected ACK after processed read.\n");
+			break;
+		}
+		irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
+		i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
+		writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+		writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		break;
+	case ASPEED_I2C_SLAVE_WRITE_REQUESTED:
+		bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+		break;
+	case ASPEED_I2C_SLAVE_WRITE_RECEIVED:
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
+		break;
+	case ASPEED_I2C_SLAVE_STOP:
+		/* Stop event handling is done early. Unreachable. */
+		break;
+	case ASPEED_I2C_SLAVE_START:
+		/* Slave was just started. Waiting for the next event. */;
+		break;
+	default:
+		dev_err(bus->dev, "unknown slave_state: %d\n",
+			bus->slave_state);
+		bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
+		break;
+	}
+
+	return irq_handled;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
+{
+	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
+	struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
+	u8 slave_addr = i2c_8bit_addr_from_msg(msg);
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/*
+	 * If it's requested in the middle of a slave session, set the master
+	 * state to 'pending' then H/W will continue handling this master
+	 * command when the bus comes back to the idle state.
+	 */
+	if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) {
+		bus->master_state = ASPEED_I2C_MASTER_PENDING;
+		return;
+	}
+#endif /* CONFIG_I2C_SLAVE */
+
+	bus->master_state = ASPEED_I2C_MASTER_START;
+	bus->buf_index = 0;
+
+	if (msg->flags & I2C_M_RD) {
+		command |= ASPEED_I2CD_M_RX_CMD;
+		/* Need to let the hardware know to NACK after RX. */
+		if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
+			command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+	}
+
+	writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+	writel(command, bus->base + ASPEED_I2C_CMD_REG);
+}
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus)
+{
+	bus->master_state = ASPEED_I2C_MASTER_STOP;
+	writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+}
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus)
+{
+	if (bus->msgs_index + 1 < bus->msgs_count) {
+		bus->msgs_index++;
+		aspeed_i2c_do_start(bus);
+	} else {
+		aspeed_i2c_do_stop(bus);
+	}
+}
+
+static int aspeed_i2c_is_irq_error(u32 irq_status)
+{
+	if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS)
+		return -EAGAIN;
+	if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
+			  ASPEED_I2CD_INTR_SCL_TIMEOUT))
+		return -EBUSY;
+	if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL))
+		return -EPROTO;
+
+	return 0;
+}
+
+static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
+{
+	u32 irq_handled = 0, command = 0;
+	struct i2c_msg *msg;
+	u8 recv_byte;
+	int ret;
+
+	if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		irq_handled |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
+		goto out_complete;
+	}
+
+	/*
+	 * We encountered an interrupt that reports an error: the hardware
+	 * should clear the command queue effectively taking us back to the
+	 * INACTIVE state.
+	 */
+	ret = aspeed_i2c_is_irq_error(irq_status);
+	if (ret) {
+		dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
+			irq_status);
+		irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS);
+		if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) {
+			bus->cmd_err = ret;
+			bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+			goto out_complete;
+		}
+	}
+
+	/* Master is not currently active, irq was for someone else. */
+	if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE ||
+	    bus->master_state == ASPEED_I2C_MASTER_PENDING)
+		goto out_no_complete;
+
+	/* We are in an invalid state; reset bus to a known state. */
+	if (!bus->msgs) {
+		dev_err(bus->dev, "bus in unknown state. irq_status: 0x%x\n",
+			irq_status);
+		bus->cmd_err = -EIO;
+		if (bus->master_state != ASPEED_I2C_MASTER_STOP &&
+		    bus->master_state != ASPEED_I2C_MASTER_INACTIVE)
+			aspeed_i2c_do_stop(bus);
+		goto out_no_complete;
+	}
+	msg = &bus->msgs[bus->msgs_index];
+
+	/*
+	 * START is a special case because we still have to handle a subsequent
+	 * TX or RX immediately after we handle it, so we handle it here and
+	 * then update the state and handle the new state below.
+	 */
+	if (bus->master_state == ASPEED_I2C_MASTER_START) {
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+		/*
+		 * If a peer master starts a xfer immediately after it queues a
+		 * master command, clear the queued master command and change
+		 * its state to 'pending'. To simplify handling of pending
+		 * cases, it uses S/W solution instead of H/W command queue
+		 * handling.
+		 */
+		if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) {
+			writel(readl(bus->base + ASPEED_I2C_CMD_REG) &
+				~ASPEED_I2CD_MASTER_CMDS_MASK,
+			       bus->base + ASPEED_I2C_CMD_REG);
+			bus->master_state = ASPEED_I2C_MASTER_PENDING;
+			dev_dbg(bus->dev,
+				"master goes pending due to a slave start\n");
+			goto out_no_complete;
+		}
+#endif /* CONFIG_I2C_SLAVE */
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+			if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) {
+				bus->cmd_err = -ENXIO;
+				bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+				goto out_complete;
+			}
+			pr_devel("no slave present at %02x\n", msg->addr);
+			irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
+			bus->cmd_err = -ENXIO;
+			aspeed_i2c_do_stop(bus);
+			goto out_no_complete;
+		}
+		irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
+		if (msg->len == 0) { /* SMBUS_QUICK */
+			aspeed_i2c_do_stop(bus);
+			goto out_no_complete;
+		}
+		if (msg->flags & I2C_M_RD)
+			bus->master_state = ASPEED_I2C_MASTER_RX_FIRST;
+		else
+			bus->master_state = ASPEED_I2C_MASTER_TX_FIRST;
+	}
+
+	switch (bus->master_state) {
+	case ASPEED_I2C_MASTER_TX:
+		if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
+			dev_dbg(bus->dev, "slave NACKed TX\n");
+			irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
+			goto error_and_stop;
+		} else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+			dev_err(bus->dev, "slave failed to ACK TX\n");
+			goto error_and_stop;
+		}
+		irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
+		fallthrough;
+	case ASPEED_I2C_MASTER_TX_FIRST:
+		if (bus->buf_index < msg->len) {
+			bus->master_state = ASPEED_I2C_MASTER_TX;
+			writel(msg->buf[bus->buf_index++],
+			       bus->base + ASPEED_I2C_BYTE_BUF_REG);
+			writel(ASPEED_I2CD_M_TX_CMD,
+			       bus->base + ASPEED_I2C_CMD_REG);
+		} else {
+			aspeed_i2c_next_msg_or_stop(bus);
+		}
+		goto out_no_complete;
+	case ASPEED_I2C_MASTER_RX_FIRST:
+		/* RX may not have completed yet (only address cycle) */
+		if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
+			goto out_no_complete;
+		fallthrough;
+	case ASPEED_I2C_MASTER_RX:
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
+			dev_err(bus->dev, "master failed to RX\n");
+			goto error_and_stop;
+		}
+		irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
+
+		recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
+		msg->buf[bus->buf_index++] = recv_byte;
+
+		if (msg->flags & I2C_M_RECV_LEN) {
+			if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) {
+				bus->cmd_err = -EPROTO;
+				aspeed_i2c_do_stop(bus);
+				goto out_no_complete;
+			}
+			msg->len = recv_byte +
+					((msg->flags & I2C_CLIENT_PEC) ? 2 : 1);
+			msg->flags &= ~I2C_M_RECV_LEN;
+		}
+
+		if (bus->buf_index < msg->len) {
+			bus->master_state = ASPEED_I2C_MASTER_RX;
+			command = ASPEED_I2CD_M_RX_CMD;
+			if (bus->buf_index + 1 == msg->len)
+				command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+			writel(command, bus->base + ASPEED_I2C_CMD_REG);
+		} else {
+			aspeed_i2c_next_msg_or_stop(bus);
+		}
+		goto out_no_complete;
+	case ASPEED_I2C_MASTER_STOP:
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
+			dev_err(bus->dev,
+				"master failed to STOP. irq_status:0x%x\n",
+				irq_status);
+			bus->cmd_err = -EIO;
+			/* Do not STOP as we have already tried. */
+		} else {
+			irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		}
+
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		goto out_complete;
+	case ASPEED_I2C_MASTER_INACTIVE:
+		dev_err(bus->dev,
+			"master received interrupt 0x%08x, but is inactive\n",
+			irq_status);
+		bus->cmd_err = -EIO;
+		/* Do not STOP as we should be inactive. */
+		goto out_complete;
+	default:
+		WARN(1, "unknown master state\n");
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		bus->cmd_err = -EINVAL;
+		goto out_complete;
+	}
+error_and_stop:
+	bus->cmd_err = -EIO;
+	aspeed_i2c_do_stop(bus);
+	goto out_no_complete;
+out_complete:
+	bus->msgs = NULL;
+	if (bus->cmd_err)
+		bus->master_xfer_result = bus->cmd_err;
+	else
+		bus->master_xfer_result = bus->msgs_index + 1;
+	complete(&bus->cmd_complete);
+out_no_complete:
+	return irq_handled;
+}
+
+static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
+{
+	struct aspeed_i2c_bus *bus = dev_id;
+	u32 irq_received, irq_remaining, irq_handled;
+
+	spin_lock(&bus->lock);
+	irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+	/* Ack all interrupts except for Rx done */
+	writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
+	       bus->base + ASPEED_I2C_INTR_STS_REG);
+	readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+	irq_received &= ASPEED_I2CD_INTR_RECV_MASK;
+	irq_remaining = irq_received;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/*
+	 * In most cases, interrupt bits will be set one by one, although
+	 * multiple interrupt bits could be set at the same time. It's also
+	 * possible that master interrupt bits could be set along with slave
+	 * interrupt bits. Each case needs to be handled using corresponding
+	 * handlers depending on the current state.
+	 */
+	if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE &&
+	    bus->master_state != ASPEED_I2C_MASTER_PENDING) {
+		irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
+		irq_remaining &= ~irq_handled;
+		if (irq_remaining)
+			irq_handled |= aspeed_i2c_slave_irq(bus, irq_remaining);
+	} else {
+		irq_handled = aspeed_i2c_slave_irq(bus, irq_remaining);
+		irq_remaining &= ~irq_handled;
+		if (irq_remaining)
+			irq_handled |= aspeed_i2c_master_irq(bus,
+							     irq_remaining);
+	}
+
+	/*
+	 * Start a pending master command at here if a slave operation is
+	 * completed.
+	 */
+	if (bus->master_state == ASPEED_I2C_MASTER_PENDING &&
+	    bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
+		aspeed_i2c_do_start(bus);
+#else
+	irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
+#endif /* CONFIG_I2C_SLAVE */
+
+	irq_remaining &= ~irq_handled;
+	if (irq_remaining)
+		dev_err(bus->dev,
+			"irq handled != irq. expected 0x%08x, but was 0x%08x\n",
+			irq_received, irq_handled);
+
+	/* Ack Rx done */
+	if (irq_received & ASPEED_I2CD_INTR_RX_DONE) {
+		writel(ASPEED_I2CD_INTR_RX_DONE,
+		       bus->base + ASPEED_I2C_INTR_STS_REG);
+		readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+	}
+	spin_unlock(&bus->lock);
+	return irq_remaining ? IRQ_NONE : IRQ_HANDLED;
+}
+
+static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
+				  struct i2c_msg *msgs, int num)
+{
+	struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
+	unsigned long time_left, flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	bus->cmd_err = 0;
+
+	/* If bus is busy in a single master environment, attempt recovery. */
+	if (!bus->multi_master &&
+	    (readl(bus->base + ASPEED_I2C_CMD_REG) &
+	     ASPEED_I2CD_BUS_BUSY_STS)) {
+		int ret;
+
+		spin_unlock_irqrestore(&bus->lock, flags);
+		ret = aspeed_i2c_recover_bus(bus);
+		if (ret)
+			return ret;
+		spin_lock_irqsave(&bus->lock, flags);
+	}
+
+	bus->cmd_err = 0;
+	bus->msgs = msgs;
+	bus->msgs_index = 0;
+	bus->msgs_count = num;
+
+	reinit_completion(&bus->cmd_complete);
+	aspeed_i2c_do_start(bus);
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	time_left = wait_for_completion_timeout(&bus->cmd_complete,
+						bus->adap.timeout);
+
+	if (time_left == 0) {
+		/*
+		 * In a multi-master setup, if a timeout occurs, attempt
+		 * recovery. But if the bus is idle, we still need to reset the
+		 * i2c controller to clear the remaining interrupts.
+		 */
+		if (bus->multi_master &&
+		    (readl(bus->base + ASPEED_I2C_CMD_REG) &
+		     ASPEED_I2CD_BUS_BUSY_STS))
+			aspeed_i2c_recover_bus(bus);
+		else
+			aspeed_i2c_reset(bus);
+
+		/*
+		 * If timed out and the state is still pending, drop the pending
+		 * master command.
+		 */
+		spin_lock_irqsave(&bus->lock, flags);
+		if (bus->master_state == ASPEED_I2C_MASTER_PENDING)
+			bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		return -ETIMEDOUT;
+	}
+
+	return bus->master_xfer_result;
+}
+
+static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+/* precondition: bus.lock has been acquired. */
+static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr)
+{
+	u32 addr_reg_val, func_ctrl_reg_val;
+
+	/* Set slave addr. */
+	addr_reg_val = readl(bus->base + ASPEED_I2C_DEV_ADDR_REG);
+	addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
+	addr_reg_val |= slave_addr & ASPEED_I2CD_DEV_ADDR_MASK;
+	writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG);
+
+	/* Turn on slave mode. */
+	func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
+	writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
+}
+
+static int aspeed_i2c_reg_slave(struct i2c_client *client)
+{
+	struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	if (bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		return -EINVAL;
+	}
+
+	__aspeed_i2c_reg_slave(bus, client->addr);
+
+	bus->slave = client;
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return 0;
+}
+
+static int aspeed_i2c_unreg_slave(struct i2c_client *client)
+{
+	struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
+	u32 func_ctrl_reg_val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	if (!bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		return -EINVAL;
+	}
+
+	/* Turn off slave mode. */
+	func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
+	writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	bus->slave = NULL;
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return 0;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
+static const struct i2c_algorithm aspeed_i2c_algo = {
+	.master_xfer	= aspeed_i2c_master_xfer,
+	.functionality	= aspeed_i2c_functionality,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	.reg_slave	= aspeed_i2c_reg_slave,
+	.unreg_slave	= aspeed_i2c_unreg_slave,
+#endif /* CONFIG_I2C_SLAVE */
+};
+
+static u32 aspeed_i2c_get_clk_reg_val(struct device *dev,
+				      u32 clk_high_low_mask,
+				      u32 divisor)
+{
+	u32 base_clk_divisor, clk_high_low_max, clk_high, clk_low, tmp;
+
+	/*
+	 * SCL_high and SCL_low represent a value 1 greater than what is stored
+	 * since a zero divider is meaningless. Thus, the max value each can
+	 * store is every bit set + 1. Since SCL_high and SCL_low are added
+	 * together (see below), the max value of both is the max value of one
+	 * them times two.
+	 */
+	clk_high_low_max = (clk_high_low_mask + 1) * 2;
+
+	/*
+	 * The actual clock frequency of SCL is:
+	 *	SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low))
+	 *		 = APB_freq / divisor
+	 * where base_freq is a programmable clock divider; its value is
+	 *	base_freq = 1 << base_clk_divisor
+	 * SCL_high is the number of base_freq clock cycles that SCL stays high
+	 * and SCL_low is the number of base_freq clock cycles that SCL stays
+	 * low for a period of SCL.
+	 * The actual register has a minimum SCL_high and SCL_low minimum of 1;
+	 * thus, they start counting at zero. So
+	 *	SCL_high = clk_high + 1
+	 *	SCL_low	 = clk_low + 1
+	 * Thus,
+	 *	SCL_freq = APB_freq /
+	 *		((1 << base_clk_divisor) * (clk_high + 1 + clk_low + 1))
+	 * The documentation recommends clk_high >= clk_high_max / 2 and
+	 * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint
+	 * gives us the following solution:
+	 */
+	base_clk_divisor = divisor > clk_high_low_max ?
+			ilog2((divisor - 1) / clk_high_low_max) + 1 : 0;
+
+	if (base_clk_divisor > ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) {
+		base_clk_divisor = ASPEED_I2CD_TIME_BASE_DIVISOR_MASK;
+		clk_low = clk_high_low_mask;
+		clk_high = clk_high_low_mask;
+		dev_err(dev,
+			"clamping clock divider: divider requested, %u, is greater than largest possible divider, %u.\n",
+			divisor, (1 << base_clk_divisor) * clk_high_low_max);
+	} else {
+		tmp = (divisor + (1 << base_clk_divisor) - 1)
+				>> base_clk_divisor;
+		clk_low = tmp / 2;
+		clk_high = tmp - clk_low;
+
+		if (clk_high)
+			clk_high--;
+
+		if (clk_low)
+			clk_low--;
+	}
+
+
+	return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
+		& ASPEED_I2CD_TIME_SCL_HIGH_MASK)
+			| ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT)
+			   & ASPEED_I2CD_TIME_SCL_LOW_MASK)
+			| (base_clk_divisor
+			   & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
+}
+
+static u32 aspeed_i2c_24xx_get_clk_reg_val(struct device *dev, u32 divisor)
+{
+	/*
+	 * clk_high and clk_low are each 3 bits wide, so each can hold a max
+	 * value of 8 giving a clk_high_low_max of 16.
+	 */
+	return aspeed_i2c_get_clk_reg_val(dev, GENMASK(2, 0), divisor);
+}
+
+static u32 aspeed_i2c_25xx_get_clk_reg_val(struct device *dev, u32 divisor)
+{
+	/*
+	 * clk_high and clk_low are each 4 bits wide, so each can hold a max
+	 * value of 16 giving a clk_high_low_max of 32.
+	 */
+	return aspeed_i2c_get_clk_reg_val(dev, GENMASK(3, 0), divisor);
+}
+
+/* precondition: bus.lock has been acquired. */
+static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus)
+{
+	u32 divisor, clk_reg_val;
+
+	divisor = DIV_ROUND_UP(bus->parent_clk_frequency, bus->bus_frequency);
+	clk_reg_val = readl(bus->base + ASPEED_I2C_AC_TIMING_REG1);
+	clk_reg_val &= (ASPEED_I2CD_TIME_TBUF_MASK |
+			ASPEED_I2CD_TIME_THDSTA_MASK |
+			ASPEED_I2CD_TIME_TACST_MASK);
+	clk_reg_val |= bus->get_clk_reg_val(bus->dev, divisor);
+	writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
+	writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2);
+
+	return 0;
+}
+
+/* precondition: bus.lock has been acquired. */
+static int aspeed_i2c_init(struct aspeed_i2c_bus *bus,
+			     struct platform_device *pdev)
+{
+	u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN;
+	int ret;
+
+	/* Disable everything. */
+	writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	ret = aspeed_i2c_init_clk(bus);
+	if (ret < 0)
+		return ret;
+
+	if (of_property_read_bool(pdev->dev.of_node, "multi-master"))
+		bus->multi_master = true;
+	else
+		fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS;
+
+	/* Enable Master Mode */
+	writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg,
+	       bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* If slave has already been registered, re-enable it. */
+	if (bus->slave)
+		__aspeed_i2c_reg_slave(bus, bus->slave->addr);
+#endif /* CONFIG_I2C_SLAVE */
+
+	/* Set interrupt generation of I2C controller */
+	writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+	return 0;
+}
+
+static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
+{
+	struct platform_device *pdev = to_platform_device(bus->dev);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&bus->lock, flags);
+
+	/* Disable and ack all interrupts. */
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+	writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+	ret = aspeed_i2c_init(bus, pdev);
+
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return ret;
+}
+
+static const struct of_device_id aspeed_i2c_bus_of_table[] = {
+	{
+		.compatible = "aspeed,ast2400-i2c-bus",
+		.data = aspeed_i2c_24xx_get_clk_reg_val,
+	},
+	{
+		.compatible = "aspeed,ast2500-i2c-bus",
+		.data = aspeed_i2c_25xx_get_clk_reg_val,
+	},
+	{
+		.compatible = "aspeed,ast2600-i2c-bus",
+		.data = aspeed_i2c_25xx_get_clk_reg_val,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
+
+static int aspeed_i2c_probe_bus(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct aspeed_i2c_bus *bus;
+	struct clk *parent_clk;
+	struct resource *res;
+	int irq, ret;
+
+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bus->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(bus->base))
+		return PTR_ERR(bus->base);
+
+	parent_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(parent_clk))
+		return PTR_ERR(parent_clk);
+	bus->parent_clk_frequency = clk_get_rate(parent_clk);
+	/* We just need the clock rate, we don't actually use the clk object. */
+	devm_clk_put(&pdev->dev, parent_clk);
+
+	bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
+	if (IS_ERR(bus->rst)) {
+		dev_err(&pdev->dev,
+			"missing or invalid reset controller device tree entry\n");
+		return PTR_ERR(bus->rst);
+	}
+	reset_control_deassert(bus->rst);
+
+	ret = of_property_read_u32(pdev->dev.of_node,
+				   "bus-frequency", &bus->bus_frequency);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Could not read bus-frequency property\n");
+		bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ;
+	}
+
+	match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node);
+	if (!match)
+		bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val;
+	else
+		bus->get_clk_reg_val = (u32 (*)(struct device *, u32))
+				match->data;
+
+	/* Initialize the I2C adapter */
+	spin_lock_init(&bus->lock);
+	init_completion(&bus->cmd_complete);
+	bus->adap.owner = THIS_MODULE;
+	bus->adap.retries = 0;
+	bus->adap.algo = &aspeed_i2c_algo;
+	bus->adap.dev.parent = &pdev->dev;
+	bus->adap.dev.of_node = pdev->dev.of_node;
+	strlcpy(bus->adap.name, pdev->name, sizeof(bus->adap.name));
+	i2c_set_adapdata(&bus->adap, bus);
+
+	bus->dev = &pdev->dev;
+
+	/* Clean up any left over interrupt state. */
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+	writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
+	/*
+	 * bus.lock does not need to be held because the interrupt handler has
+	 * not been enabled yet.
+	 */
+	ret = aspeed_i2c_init(bus, pdev);
+	if (ret < 0)
+		return ret;
+
+	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq,
+			       0, dev_name(&pdev->dev), bus);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_add_adapter(&bus->adap);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, bus);
+
+	dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
+		 bus->adap.nr, irq);
+
+	return 0;
+}
+
+static int aspeed_i2c_remove_bus(struct platform_device *pdev)
+{
+	struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+
+	/* Disable everything. */
+	writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	reset_control_assert(bus->rst);
+
+	i2c_del_adapter(&bus->adap);
+
+	return 0;
+}
+
+static struct platform_driver aspeed_i2c_bus_driver = {
+	.probe		= aspeed_i2c_probe_bus,
+	.remove		= aspeed_i2c_remove_bus,
+	.driver		= {
+		.name		= "aspeed-i2c-bus",
+		.of_match_table	= aspeed_i2c_bus_of_table,
+	},
+};
+module_platform_driver(aspeed_i2c_bus_driver);
+
+MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
+MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
+MODULE_LICENSE("GPL v2");