Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 972 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
new file mode 100644
index 000000000..cec2b2ae7
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -0,0 +1,972 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * Copyright(c) 2012 Intel Corporation. All rights reserved.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ *  Supports the SMBus Message Transport (SMT) in the Intel Atom Processor
+ *  S12xx Product Family.
+ *
+ *  Features supported by this driver:
+ *  Hardware PEC                     yes
+ *  Block buffer                     yes
+ *  Block process call transaction   no
+ *  Slave mode                       no
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+
+#include <linux/io-64-nonatomic-lo-hi.h>
+
+/* PCI Address Constants */
+#define SMBBAR		0
+
+/* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */
+#define PCI_DEVICE_ID_INTEL_S1200_SMT0	0x0c59
+#define PCI_DEVICE_ID_INTEL_S1200_SMT1	0x0c5a
+#define PCI_DEVICE_ID_INTEL_CDF_SMT	0x18ac
+#define PCI_DEVICE_ID_INTEL_DNV_SMT	0x19ac
+#define PCI_DEVICE_ID_INTEL_EBG_SMT	0x1bff
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMT	0x1f15
+
+#define ISMT_DESC_ENTRIES	2	/* number of descriptor entries */
+#define ISMT_MAX_RETRIES	3	/* number of SMBus retries to attempt */
+#define ISMT_LOG_ENTRIES	3	/* number of interrupt cause log entries */
+
+/* Hardware Descriptor Constants - Control Field */
+#define ISMT_DESC_CWRL	0x01	/* Command/Write Length */
+#define ISMT_DESC_BLK	0X04	/* Perform Block Transaction */
+#define ISMT_DESC_FAIR	0x08	/* Set fairness flag upon successful arbit. */
+#define ISMT_DESC_PEC	0x10	/* Packet Error Code */
+#define ISMT_DESC_I2C	0x20	/* I2C Enable */
+#define ISMT_DESC_INT	0x40	/* Interrupt */
+#define ISMT_DESC_SOE	0x80	/* Stop On Error */
+
+/* Hardware Descriptor Constants - Status Field */
+#define ISMT_DESC_SCS	0x01	/* Success */
+#define ISMT_DESC_DLTO	0x04	/* Data Low Time Out */
+#define ISMT_DESC_NAK	0x08	/* NAK Received */
+#define ISMT_DESC_CRC	0x10	/* CRC Error */
+#define ISMT_DESC_CLTO	0x20	/* Clock Low Time Out */
+#define ISMT_DESC_COL	0x40	/* Collisions */
+#define ISMT_DESC_LPR	0x80	/* Large Packet Received */
+
+/* Macros */
+#define ISMT_DESC_ADDR_RW(addr, rw) (((addr) << 1) | (rw))
+
+/* iSMT General Register address offsets (SMBBAR + <addr>) */
+#define ISMT_GR_GCTRL		0x000	/* General Control */
+#define ISMT_GR_SMTICL		0x008	/* SMT Interrupt Cause Location */
+#define ISMT_GR_ERRINTMSK	0x010	/* Error Interrupt Mask */
+#define ISMT_GR_ERRAERMSK	0x014	/* Error AER Mask */
+#define ISMT_GR_ERRSTS		0x018	/* Error Status */
+#define ISMT_GR_ERRINFO		0x01c	/* Error Information */
+
+/* iSMT Master Registers */
+#define ISMT_MSTR_MDBA		0x100	/* Master Descriptor Base Address */
+#define ISMT_MSTR_MCTRL		0x108	/* Master Control */
+#define ISMT_MSTR_MSTS		0x10c	/* Master Status */
+#define ISMT_MSTR_MDS		0x110	/* Master Descriptor Size */
+#define ISMT_MSTR_RPOLICY	0x114	/* Retry Policy */
+
+/* iSMT Miscellaneous Registers */
+#define ISMT_SPGT	0x300	/* SMBus PHY Global Timing */
+
+/* General Control Register (GCTRL) bit definitions */
+#define ISMT_GCTRL_TRST	0x04	/* Target Reset */
+#define ISMT_GCTRL_KILL	0x08	/* Kill */
+#define ISMT_GCTRL_SRST	0x40	/* Soft Reset */
+
+/* Master Control Register (MCTRL) bit definitions */
+#define ISMT_MCTRL_SS	0x01		/* Start/Stop */
+#define ISMT_MCTRL_MEIE	0x10		/* Master Error Interrupt Enable */
+#define ISMT_MCTRL_FMHP	0x00ff0000	/* Firmware Master Head Ptr (FMHP) */
+
+/* Master Status Register (MSTS) bit definitions */
+#define ISMT_MSTS_HMTP	0xff0000	/* HW Master Tail Pointer (HMTP) */
+#define ISMT_MSTS_MIS	0x20		/* Master Interrupt Status (MIS) */
+#define ISMT_MSTS_MEIS	0x10		/* Master Error Int Status (MEIS) */
+#define ISMT_MSTS_IP	0x01		/* In Progress */
+
+/* Master Descriptor Size (MDS) bit definitions */
+#define ISMT_MDS_MASK	0xff	/* Master Descriptor Size mask (MDS) */
+
+/* SMBus PHY Global Timing Register (SPGT) bit definitions */
+#define ISMT_SPGT_SPD_MASK	0xc0000000	/* SMBus Speed mask */
+#define ISMT_SPGT_SPD_80K	0x00		/* 80 kHz */
+#define ISMT_SPGT_SPD_100K	(0x1 << 30)	/* 100 kHz */
+#define ISMT_SPGT_SPD_400K	(0x2 << 30)	/* 400 kHz */
+#define ISMT_SPGT_SPD_1M	(0x3 << 30)	/* 1 MHz */
+
+
+/* MSI Control Register (MSICTL) bit definitions */
+#define ISMT_MSICTL_MSIE	0x01	/* MSI Enable */
+
+/* iSMT Hardware Descriptor */
+struct ismt_desc {
+	u8 tgtaddr_rw;	/* target address & r/w bit */
+	u8 wr_len_cmd;	/* write length in bytes or a command */
+	u8 rd_len;	/* read length */
+	u8 control;	/* control bits */
+	u8 status;	/* status bits */
+	u8 retry;	/* collision retry and retry count */
+	u8 rxbytes;	/* received bytes */
+	u8 txbytes;	/* transmitted bytes */
+	u32 dptr_low;	/* lower 32 bit of the data pointer */
+	u32 dptr_high;	/* upper 32 bit of the data pointer */
+} __packed;
+
+struct ismt_priv {
+	struct i2c_adapter adapter;
+	void __iomem *smba;			/* PCI BAR */
+	struct pci_dev *pci_dev;
+	struct ismt_desc *hw;			/* descriptor virt base addr */
+	dma_addr_t io_rng_dma;			/* descriptor HW base addr */
+	u8 head;				/* ring buffer head pointer */
+	struct completion cmp;			/* interrupt completion */
+	u8 buffer[I2C_SMBUS_BLOCK_MAX + 16];	/* temp R/W data buffer */
+	dma_addr_t log_dma;
+	u32 *log;
+};
+
+static const struct pci_device_id ismt_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EBG_SMT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, ismt_ids);
+
+/* Bus speed control bits for slow debuggers - refer to the docs for usage */
+static unsigned int bus_speed;
+module_param(bus_speed, uint, S_IRUGO);
+MODULE_PARM_DESC(bus_speed, "Bus Speed in kHz (0 = BIOS default)");
+
+/**
+ * __ismt_desc_dump() - dump the contents of a specific descriptor
+ * @dev: the iSMT device
+ * @desc: the iSMT hardware descriptor
+ */
+static void __ismt_desc_dump(struct device *dev, const struct ismt_desc *desc)
+{
+
+	dev_dbg(dev, "Descriptor struct:  %p\n", desc);
+	dev_dbg(dev, "\ttgtaddr_rw=0x%02X\n", desc->tgtaddr_rw);
+	dev_dbg(dev, "\twr_len_cmd=0x%02X\n", desc->wr_len_cmd);
+	dev_dbg(dev, "\trd_len=    0x%02X\n", desc->rd_len);
+	dev_dbg(dev, "\tcontrol=   0x%02X\n", desc->control);
+	dev_dbg(dev, "\tstatus=    0x%02X\n", desc->status);
+	dev_dbg(dev, "\tretry=     0x%02X\n", desc->retry);
+	dev_dbg(dev, "\trxbytes=   0x%02X\n", desc->rxbytes);
+	dev_dbg(dev, "\ttxbytes=   0x%02X\n", desc->txbytes);
+	dev_dbg(dev, "\tdptr_low=  0x%08X\n", desc->dptr_low);
+	dev_dbg(dev, "\tdptr_high= 0x%08X\n", desc->dptr_high);
+}
+/**
+ * ismt_desc_dump() - dump the contents of a descriptor for debug purposes
+ * @priv: iSMT private data
+ */
+static void ismt_desc_dump(struct ismt_priv *priv)
+{
+	struct device *dev = &priv->pci_dev->dev;
+	struct ismt_desc *desc = &priv->hw[priv->head];
+
+	dev_dbg(dev, "Dump of the descriptor struct:  0x%X\n", priv->head);
+	__ismt_desc_dump(dev, desc);
+}
+
+/**
+ * ismt_gen_reg_dump() - dump the iSMT General Registers
+ * @priv: iSMT private data
+ */
+static void ismt_gen_reg_dump(struct ismt_priv *priv)
+{
+	struct device *dev = &priv->pci_dev->dev;
+
+	dev_dbg(dev, "Dump of the iSMT General Registers\n");
+	dev_dbg(dev, "  GCTRL.... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_GR_GCTRL,
+		readl(priv->smba + ISMT_GR_GCTRL));
+	dev_dbg(dev, "  SMTICL... : (0x%p)=0x%016llX\n",
+		priv->smba + ISMT_GR_SMTICL,
+		(long long unsigned int)readq(priv->smba + ISMT_GR_SMTICL));
+	dev_dbg(dev, "  ERRINTMSK : (0x%p)=0x%X\n",
+		priv->smba + ISMT_GR_ERRINTMSK,
+		readl(priv->smba + ISMT_GR_ERRINTMSK));
+	dev_dbg(dev, "  ERRAERMSK : (0x%p)=0x%X\n",
+		priv->smba + ISMT_GR_ERRAERMSK,
+		readl(priv->smba + ISMT_GR_ERRAERMSK));
+	dev_dbg(dev, "  ERRSTS... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_GR_ERRSTS,
+		readl(priv->smba + ISMT_GR_ERRSTS));
+	dev_dbg(dev, "  ERRINFO.. : (0x%p)=0x%X\n",
+		priv->smba + ISMT_GR_ERRINFO,
+		readl(priv->smba + ISMT_GR_ERRINFO));
+}
+
+/**
+ * ismt_mstr_reg_dump() - dump the iSMT Master Registers
+ * @priv: iSMT private data
+ */
+static void ismt_mstr_reg_dump(struct ismt_priv *priv)
+{
+	struct device *dev = &priv->pci_dev->dev;
+
+	dev_dbg(dev, "Dump of the iSMT Master Registers\n");
+	dev_dbg(dev, "  MDBA..... : (0x%p)=0x%016llX\n",
+		priv->smba + ISMT_MSTR_MDBA,
+		(long long unsigned int)readq(priv->smba + ISMT_MSTR_MDBA));
+	dev_dbg(dev, "  MCTRL.... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_MSTR_MCTRL,
+		readl(priv->smba + ISMT_MSTR_MCTRL));
+	dev_dbg(dev, "  MSTS..... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_MSTR_MSTS,
+		readl(priv->smba + ISMT_MSTR_MSTS));
+	dev_dbg(dev, "  MDS...... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_MSTR_MDS,
+		readl(priv->smba + ISMT_MSTR_MDS));
+	dev_dbg(dev, "  RPOLICY.. : (0x%p)=0x%X\n",
+		priv->smba + ISMT_MSTR_RPOLICY,
+		readl(priv->smba + ISMT_MSTR_RPOLICY));
+	dev_dbg(dev, "  SPGT..... : (0x%p)=0x%X\n",
+		priv->smba + ISMT_SPGT,
+		readl(priv->smba + ISMT_SPGT));
+}
+
+/**
+ * ismt_submit_desc() - add a descriptor to the ring
+ * @priv: iSMT private data
+ */
+static void ismt_submit_desc(struct ismt_priv *priv)
+{
+	uint fmhp;
+	uint val;
+
+	ismt_desc_dump(priv);
+	ismt_gen_reg_dump(priv);
+	ismt_mstr_reg_dump(priv);
+
+	/* Set the FMHP (Firmware Master Head Pointer)*/
+	fmhp = ((priv->head + 1) % ISMT_DESC_ENTRIES) << 16;
+	val = readl(priv->smba + ISMT_MSTR_MCTRL);
+	writel((val & ~ISMT_MCTRL_FMHP) | fmhp,
+	       priv->smba + ISMT_MSTR_MCTRL);
+
+	/* Set the start bit */
+	val = readl(priv->smba + ISMT_MSTR_MCTRL);
+	writel(val | ISMT_MCTRL_SS,
+	       priv->smba + ISMT_MSTR_MCTRL);
+}
+
+/**
+ * ismt_process_desc() - handle the completion of the descriptor
+ * @desc: the iSMT hardware descriptor
+ * @data: data buffer from the upper layer
+ * @priv: ismt_priv struct holding our dma buffer
+ * @size: SMBus transaction type
+ * @read_write: flag to indicate if this is a read or write
+ */
+static int ismt_process_desc(const struct ismt_desc *desc,
+			     union i2c_smbus_data *data,
+			     struct ismt_priv *priv, int size,
+			     char read_write)
+{
+	u8 *dma_buffer = PTR_ALIGN(&priv->buffer[0], 16);
+
+	dev_dbg(&priv->pci_dev->dev, "Processing completed descriptor\n");
+	__ismt_desc_dump(&priv->pci_dev->dev, desc);
+	ismt_gen_reg_dump(priv);
+	ismt_mstr_reg_dump(priv);
+
+	if (desc->status & ISMT_DESC_SCS) {
+		if (read_write == I2C_SMBUS_WRITE &&
+		    size != I2C_SMBUS_PROC_CALL)
+			return 0;
+
+		switch (size) {
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_BYTE_DATA:
+			data->byte = dma_buffer[0];
+			break;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			data->word = dma_buffer[0] | (dma_buffer[1] << 8);
+			break;
+		case I2C_SMBUS_BLOCK_DATA:
+			if (desc->rxbytes != dma_buffer[0] + 1)
+				return -EMSGSIZE;
+
+			memcpy(data->block, dma_buffer, desc->rxbytes);
+			break;
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			memcpy(&data->block[1], dma_buffer, desc->rxbytes);
+			data->block[0] = desc->rxbytes;
+			break;
+		}
+		return 0;
+	}
+
+	if (likely(desc->status & ISMT_DESC_NAK))
+		return -ENXIO;
+
+	if (desc->status & ISMT_DESC_CRC)
+		return -EBADMSG;
+
+	if (desc->status & ISMT_DESC_COL)
+		return -EAGAIN;
+
+	if (desc->status & ISMT_DESC_LPR)
+		return -EPROTO;
+
+	if (desc->status & (ISMT_DESC_DLTO | ISMT_DESC_CLTO))
+		return -ETIMEDOUT;
+
+	return -EIO;
+}
+
+/**
+ * ismt_access() - process an SMBus command
+ * @adap: the i2c host adapter
+ * @addr: address of the i2c/SMBus target
+ * @flags: command options
+ * @read_write: read from or write to device
+ * @command: the i2c/SMBus command to issue
+ * @size: SMBus transaction type
+ * @data: read/write data buffer
+ */
+static int ismt_access(struct i2c_adapter *adap, u16 addr,
+		       unsigned short flags, char read_write, u8 command,
+		       int size, union i2c_smbus_data *data)
+{
+	int ret;
+	unsigned long time_left;
+	dma_addr_t dma_addr = 0; /* address of the data buffer */
+	u8 dma_size = 0;
+	enum dma_data_direction dma_direction = 0;
+	struct ismt_desc *desc;
+	struct ismt_priv *priv = i2c_get_adapdata(adap);
+	struct device *dev = &priv->pci_dev->dev;
+	u8 *dma_buffer = PTR_ALIGN(&priv->buffer[0], 16);
+
+	desc = &priv->hw[priv->head];
+
+	/* Initialize the DMA buffer */
+	memset(priv->buffer, 0, sizeof(priv->buffer));
+
+	/* Initialize the descriptor */
+	memset(desc, 0, sizeof(struct ismt_desc));
+	desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write);
+
+	/* Always clear the log entries */
+	memset(priv->log, 0, ISMT_LOG_ENTRIES * sizeof(u32));
+
+	/* Initialize common control bits */
+	if (likely(pci_dev_msi_enabled(priv->pci_dev)))
+		desc->control = ISMT_DESC_INT | ISMT_DESC_FAIR;
+	else
+		desc->control = ISMT_DESC_FAIR;
+
+	if ((flags & I2C_CLIENT_PEC) && (size != I2C_SMBUS_QUICK)
+	    && (size != I2C_SMBUS_I2C_BLOCK_DATA))
+		desc->control |= ISMT_DESC_PEC;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		dev_dbg(dev, "I2C_SMBUS_QUICK\n");
+		break;
+
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE) {
+			/*
+			 * Send Byte
+			 * The command field contains the write data
+			 */
+			dev_dbg(dev, "I2C_SMBUS_BYTE:  WRITE\n");
+			desc->control |= ISMT_DESC_CWRL;
+			desc->wr_len_cmd = command;
+		} else {
+			/* Receive Byte */
+			dev_dbg(dev, "I2C_SMBUS_BYTE:  READ\n");
+			dma_size = 1;
+			dma_direction = DMA_FROM_DEVICE;
+			desc->rd_len = 1;
+		}
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_WRITE) {
+			/*
+			 * Write Byte
+			 * Command plus 1 data byte
+			 */
+			dev_dbg(dev, "I2C_SMBUS_BYTE_DATA:  WRITE\n");
+			desc->wr_len_cmd = 2;
+			dma_size = 2;
+			dma_direction = DMA_TO_DEVICE;
+			dma_buffer[0] = command;
+			dma_buffer[1] = data->byte;
+		} else {
+			/* Read Byte */
+			dev_dbg(dev, "I2C_SMBUS_BYTE_DATA:  READ\n");
+			desc->control |= ISMT_DESC_CWRL;
+			desc->wr_len_cmd = command;
+			desc->rd_len = 1;
+			dma_size = 1;
+			dma_direction = DMA_FROM_DEVICE;
+		}
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* Write Word */
+			dev_dbg(dev, "I2C_SMBUS_WORD_DATA:  WRITE\n");
+			desc->wr_len_cmd = 3;
+			dma_size = 3;
+			dma_direction = DMA_TO_DEVICE;
+			dma_buffer[0] = command;
+			dma_buffer[1] = data->word & 0xff;
+			dma_buffer[2] = data->word >> 8;
+		} else {
+			/* Read Word */
+			dev_dbg(dev, "I2C_SMBUS_WORD_DATA:  READ\n");
+			desc->wr_len_cmd = command;
+			desc->control |= ISMT_DESC_CWRL;
+			desc->rd_len = 2;
+			dma_size = 2;
+			dma_direction = DMA_FROM_DEVICE;
+		}
+		break;
+
+	case I2C_SMBUS_PROC_CALL:
+		dev_dbg(dev, "I2C_SMBUS_PROC_CALL\n");
+		desc->wr_len_cmd = 3;
+		desc->rd_len = 2;
+		dma_size = 3;
+		dma_direction = DMA_BIDIRECTIONAL;
+		dma_buffer[0] = command;
+		dma_buffer[1] = data->word & 0xff;
+		dma_buffer[2] = data->word >> 8;
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* Block Write */
+			dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA:  WRITE\n");
+			if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+				return -EINVAL;
+
+			dma_size = data->block[0] + 1;
+			dma_direction = DMA_TO_DEVICE;
+			desc->wr_len_cmd = dma_size;
+			desc->control |= ISMT_DESC_BLK;
+			dma_buffer[0] = command;
+			memcpy(&dma_buffer[1], &data->block[1], dma_size - 1);
+		} else {
+			/* Block Read */
+			dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA:  READ\n");
+			dma_size = I2C_SMBUS_BLOCK_MAX;
+			dma_direction = DMA_FROM_DEVICE;
+			desc->rd_len = dma_size;
+			desc->wr_len_cmd = command;
+			desc->control |= (ISMT_DESC_BLK | ISMT_DESC_CWRL);
+		}
+		break;
+
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		/* Make sure the length is valid */
+		if (data->block[0] < 1)
+			data->block[0] = 1;
+
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX;
+
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* i2c Block Write */
+			dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA:  WRITE\n");
+			dma_size = data->block[0] + 1;
+			dma_direction = DMA_TO_DEVICE;
+			desc->wr_len_cmd = dma_size;
+			desc->control |= ISMT_DESC_I2C;
+			dma_buffer[0] = command;
+			memcpy(&dma_buffer[1], &data->block[1], dma_size - 1);
+		} else {
+			/* i2c Block Read */
+			dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA:  READ\n");
+			dma_size = data->block[0];
+			dma_direction = DMA_FROM_DEVICE;
+			desc->rd_len = dma_size;
+			desc->wr_len_cmd = command;
+			desc->control |= (ISMT_DESC_I2C | ISMT_DESC_CWRL);
+			/*
+			 * Per the "Table 15-15. I2C Commands",
+			 * in the External Design Specification (EDS),
+			 * (Document Number: 508084, Revision: 2.0),
+			 * the _rw bit must be 0
+			 */
+			desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, 0);
+		}
+		break;
+
+	default:
+		dev_err(dev, "Unsupported transaction %d\n",
+			size);
+		return -EOPNOTSUPP;
+	}
+
+	/* map the data buffer */
+	if (dma_size != 0) {
+		dev_dbg(dev, " dev=%p\n", dev);
+		dev_dbg(dev, " data=%p\n", data);
+		dev_dbg(dev, " dma_buffer=%p\n", dma_buffer);
+		dev_dbg(dev, " dma_size=%d\n", dma_size);
+		dev_dbg(dev, " dma_direction=%d\n", dma_direction);
+
+		dma_addr = dma_map_single(dev,
+				      dma_buffer,
+				      dma_size,
+				      dma_direction);
+
+		if (dma_mapping_error(dev, dma_addr)) {
+			dev_err(dev, "Error in mapping dma buffer %p\n",
+				dma_buffer);
+			return -EIO;
+		}
+
+		dev_dbg(dev, " dma_addr = %pad\n", &dma_addr);
+
+		desc->dptr_low = lower_32_bits(dma_addr);
+		desc->dptr_high = upper_32_bits(dma_addr);
+	}
+
+	reinit_completion(&priv->cmp);
+
+	/* Add the descriptor */
+	ismt_submit_desc(priv);
+
+	/* Now we wait for interrupt completion, 1s */
+	time_left = wait_for_completion_timeout(&priv->cmp, HZ*1);
+
+	/* unmap the data buffer */
+	if (dma_size != 0)
+		dma_unmap_single(dev, dma_addr, dma_size, dma_direction);
+
+	if (unlikely(!time_left)) {
+		dev_err(dev, "completion wait timed out\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	/* do any post processing of the descriptor here */
+	ret = ismt_process_desc(desc, data, priv, size, read_write);
+
+out:
+	/* Update the ring pointer */
+	priv->head++;
+	priv->head %= ISMT_DESC_ENTRIES;
+
+	return ret;
+}
+
+/**
+ * ismt_func() - report which i2c commands are supported by this adapter
+ * @adap: the i2c host adapter
+ */
+static u32 ismt_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_QUICK		|
+	       I2C_FUNC_SMBUS_BYTE		|
+	       I2C_FUNC_SMBUS_BYTE_DATA		|
+	       I2C_FUNC_SMBUS_WORD_DATA		|
+	       I2C_FUNC_SMBUS_PROC_CALL		|
+	       I2C_FUNC_SMBUS_BLOCK_DATA	|
+	       I2C_FUNC_SMBUS_I2C_BLOCK		|
+	       I2C_FUNC_SMBUS_PEC;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= ismt_access,
+	.functionality	= ismt_func,
+};
+
+/**
+ * ismt_handle_isr() - interrupt handler bottom half
+ * @priv: iSMT private data
+ */
+static irqreturn_t ismt_handle_isr(struct ismt_priv *priv)
+{
+	complete(&priv->cmp);
+
+	return IRQ_HANDLED;
+}
+
+
+/**
+ * ismt_do_interrupt() - IRQ interrupt handler
+ * @vec: interrupt vector
+ * @data: iSMT private data
+ */
+static irqreturn_t ismt_do_interrupt(int vec, void *data)
+{
+	u32 val;
+	struct ismt_priv *priv = data;
+
+	/*
+	 * check to see it's our interrupt, return IRQ_NONE if not ours
+	 * since we are sharing interrupt
+	 */
+	val = readl(priv->smba + ISMT_MSTR_MSTS);
+
+	if (!(val & (ISMT_MSTS_MIS | ISMT_MSTS_MEIS)))
+		return IRQ_NONE;
+	else
+		writel(val | ISMT_MSTS_MIS | ISMT_MSTS_MEIS,
+		       priv->smba + ISMT_MSTR_MSTS);
+
+	return ismt_handle_isr(priv);
+}
+
+/**
+ * ismt_do_msi_interrupt() - MSI interrupt handler
+ * @vec: interrupt vector
+ * @data: iSMT private data
+ */
+static irqreturn_t ismt_do_msi_interrupt(int vec, void *data)
+{
+	return ismt_handle_isr(data);
+}
+
+/**
+ * ismt_hw_init() - initialize the iSMT hardware
+ * @priv: iSMT private data
+ */
+static void ismt_hw_init(struct ismt_priv *priv)
+{
+	u32 val;
+	struct device *dev = &priv->pci_dev->dev;
+
+	/* initialize the Master Descriptor Base Address (MDBA) */
+	writeq(priv->io_rng_dma, priv->smba + ISMT_MSTR_MDBA);
+
+	writeq(priv->log_dma, priv->smba + ISMT_GR_SMTICL);
+
+	/* initialize the Master Control Register (MCTRL) */
+	writel(ISMT_MCTRL_MEIE, priv->smba + ISMT_MSTR_MCTRL);
+
+	/* initialize the Master Status Register (MSTS) */
+	writel(0, priv->smba + ISMT_MSTR_MSTS);
+
+	/* initialize the Master Descriptor Size (MDS) */
+	val = readl(priv->smba + ISMT_MSTR_MDS);
+	writel((val & ~ISMT_MDS_MASK) | (ISMT_DESC_ENTRIES - 1),
+		priv->smba + ISMT_MSTR_MDS);
+
+	/*
+	 * Set the SMBus speed (could use this for slow HW debuggers)
+	 */
+
+	val = readl(priv->smba + ISMT_SPGT);
+
+	switch (bus_speed) {
+	case 0:
+		break;
+
+	case 80:
+		dev_dbg(dev, "Setting SMBus clock to 80 kHz\n");
+		writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_80K),
+			priv->smba + ISMT_SPGT);
+		break;
+
+	case 100:
+		dev_dbg(dev, "Setting SMBus clock to 100 kHz\n");
+		writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_100K),
+			priv->smba + ISMT_SPGT);
+		break;
+
+	case 400:
+		dev_dbg(dev, "Setting SMBus clock to 400 kHz\n");
+		writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_400K),
+			priv->smba + ISMT_SPGT);
+		break;
+
+	case 1000:
+		dev_dbg(dev, "Setting SMBus clock to 1000 kHz\n");
+		writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_1M),
+			priv->smba + ISMT_SPGT);
+		break;
+
+	default:
+		dev_warn(dev, "Invalid SMBus clock speed, only 0, 80, 100, 400, and 1000 are valid\n");
+		break;
+	}
+
+	val = readl(priv->smba + ISMT_SPGT);
+
+	switch (val & ISMT_SPGT_SPD_MASK) {
+	case ISMT_SPGT_SPD_80K:
+		bus_speed = 80;
+		break;
+	case ISMT_SPGT_SPD_100K:
+		bus_speed = 100;
+		break;
+	case ISMT_SPGT_SPD_400K:
+		bus_speed = 400;
+		break;
+	case ISMT_SPGT_SPD_1M:
+		bus_speed = 1000;
+		break;
+	}
+	dev_dbg(dev, "SMBus clock is running at %d kHz\n", bus_speed);
+}
+
+/**
+ * ismt_dev_init() - initialize the iSMT data structures
+ * @priv: iSMT private data
+ */
+static int ismt_dev_init(struct ismt_priv *priv)
+{
+	/* allocate memory for the descriptor */
+	priv->hw = dmam_alloc_coherent(&priv->pci_dev->dev,
+				       (ISMT_DESC_ENTRIES
+					       * sizeof(struct ismt_desc)),
+				       &priv->io_rng_dma,
+				       GFP_KERNEL);
+	if (!priv->hw)
+		return -ENOMEM;
+
+	priv->head = 0;
+	init_completion(&priv->cmp);
+
+	priv->log = dmam_alloc_coherent(&priv->pci_dev->dev,
+					ISMT_LOG_ENTRIES * sizeof(u32),
+					&priv->log_dma, GFP_KERNEL);
+	if (!priv->log)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/**
+ * ismt_int_init() - initialize interrupts
+ * @priv: iSMT private data
+ */
+static int ismt_int_init(struct ismt_priv *priv)
+{
+	int err;
+
+	/* Try using MSI interrupts */
+	err = pci_enable_msi(priv->pci_dev);
+	if (err)
+		goto intx;
+
+	err = devm_request_irq(&priv->pci_dev->dev,
+			       priv->pci_dev->irq,
+			       ismt_do_msi_interrupt,
+			       0,
+			       "ismt-msi",
+			       priv);
+	if (err) {
+		pci_disable_msi(priv->pci_dev);
+		goto intx;
+	}
+
+	return 0;
+
+	/* Try using legacy interrupts */
+intx:
+	dev_warn(&priv->pci_dev->dev,
+		 "Unable to use MSI interrupts, falling back to legacy\n");
+
+	err = devm_request_irq(&priv->pci_dev->dev,
+			       priv->pci_dev->irq,
+			       ismt_do_interrupt,
+			       IRQF_SHARED,
+			       "ismt-intx",
+			       priv);
+	if (err) {
+		dev_err(&priv->pci_dev->dev, "no usable interrupts\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static struct pci_driver ismt_driver;
+
+/**
+ * ismt_probe() - probe for iSMT devices
+ * @pdev: PCI-Express device
+ * @id: PCI-Express device ID
+ */
+static int
+ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int err;
+	struct ismt_priv *priv;
+	unsigned long start, len;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	pci_set_drvdata(pdev, priv);
+
+	i2c_set_adapdata(&priv->adapter, priv);
+	priv->adapter.owner = THIS_MODULE;
+	priv->adapter.class = I2C_CLASS_HWMON;
+	priv->adapter.algo = &smbus_algorithm;
+	priv->adapter.dev.parent = &pdev->dev;
+	ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev));
+	priv->adapter.retries = ISMT_MAX_RETRIES;
+
+	priv->pci_dev = pdev;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to enable SMBus PCI device (%d)\n",
+			err);
+		return err;
+	}
+
+	/* enable bus mastering */
+	pci_set_master(pdev);
+
+	/* Determine the address of the SMBus area */
+	start = pci_resource_start(pdev, SMBBAR);
+	len = pci_resource_len(pdev, SMBBAR);
+	if (!start || !len) {
+		dev_err(&pdev->dev,
+			"SMBus base address uninitialized, upgrade BIOS\n");
+		return -ENODEV;
+	}
+
+	snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+		 "SMBus iSMT adapter at %lx", start);
+
+	dev_dbg(&priv->pci_dev->dev, " start=0x%lX\n", start);
+	dev_dbg(&priv->pci_dev->dev, " len=0x%lX\n", len);
+
+	err = acpi_check_resource_conflict(&pdev->resource[SMBBAR]);
+	if (err) {
+		dev_err(&pdev->dev, "ACPI resource conflict!\n");
+		return err;
+	}
+
+	err = pci_request_region(pdev, SMBBAR, ismt_driver.name);
+	if (err) {
+		dev_err(&pdev->dev,
+			"Failed to request SMBus region 0x%lx-0x%lx\n",
+			start, start + len);
+		return err;
+	}
+
+	priv->smba = pcim_iomap(pdev, SMBBAR, len);
+	if (!priv->smba) {
+		dev_err(&pdev->dev, "Unable to ioremap SMBus BAR\n");
+		return -ENODEV;
+	}
+
+	if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) ||
+	    (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)) {
+		if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
+		    (pci_set_consistent_dma_mask(pdev,
+						 DMA_BIT_MASK(32)) != 0)) {
+			dev_err(&pdev->dev, "pci_set_dma_mask fail %p\n",
+				pdev);
+			return -ENODEV;
+		}
+	}
+
+	err = ismt_dev_init(priv);
+	if (err)
+		return err;
+
+	ismt_hw_init(priv);
+
+	err = ismt_int_init(priv);
+	if (err)
+		return err;
+
+	err = i2c_add_adapter(&priv->adapter);
+	if (err)
+		return -ENODEV;
+	return 0;
+}
+
+/**
+ * ismt_remove() - release driver resources
+ * @pdev: PCI-Express device
+ */
+static void ismt_remove(struct pci_dev *pdev)
+{
+	struct ismt_priv *priv = pci_get_drvdata(pdev);
+
+	i2c_del_adapter(&priv->adapter);
+}
+
+static struct pci_driver ismt_driver = {
+	.name = "ismt_smbus",
+	.id_table = ismt_ids,
+	.probe = ismt_probe,
+	.remove = ismt_remove,
+};
+
+module_pci_driver(ismt_driver);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Bill E. Brown <bill.e.brown@intel.com>");
+MODULE_DESCRIPTION("Intel SMBus Message Transport (iSMT) driver");