Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

70 files changed, 30338 insertions, 0 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
new file mode 100644
index 000000000..3f7a5ff17
--- /dev/null
+++ b/drivers/input/keyboard/Kconfig
@@ -0,0 +1,791 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Input core configuration
+#
+menuconfig INPUT_KEYBOARD
+	bool "Keyboards"
+	default y
+	help
+	  Say Y here, and a list of supported keyboards will be displayed.
+	  This option doesn't affect the kernel.
+
+	  If unsure, say Y.
+
+if INPUT_KEYBOARD
+
+config KEYBOARD_ADC
+	tristate "ADC Ladder Buttons"
+	depends on IIO
+	help
+	  This driver implements support for buttons connected
+	  to an ADC using a resistor ladder.
+
+	  Say Y here if your device has such buttons connected to an ADC.  Your
+	  board-specific setup logic must also provide a configuration data
+	  for mapping voltages to buttons.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adc_keys.
+
+config KEYBOARD_ADP5520
+	tristate "Keypad Support for ADP5520 PMIC"
+	depends on PMIC_ADP5520
+	help
+	  This option enables support for the keypad scan matrix
+	  on Analog Devices ADP5520 PMICs.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called adp5520-keys.
+
+config KEYBOARD_ADP5588
+	tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
+	depends on I2C
+	help
+	  Say Y here if you want to use a ADP5588/87 attached to your
+	  system I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adp5588-keys.
+
+config KEYBOARD_ADP5589
+	tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander"
+	depends on I2C
+	help
+	  Say Y here if you want to use a ADP5585/ADP5589 attached to your
+	  system I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adp5589-keys.
+
+config KEYBOARD_AMIGA
+	tristate "Amiga keyboard"
+	depends on AMIGA
+	help
+	  Say Y here if you are running Linux on any AMIGA and have a keyboard
+	  attached.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called amikbd.
+
+config KEYBOARD_APPLESPI
+	tristate "Apple SPI keyboard and trackpad"
+	depends on ACPI && EFI
+	depends on SPI
+	depends on X86 || COMPILE_TEST
+	depends on LEDS_CLASS
+	select CRC16
+	help
+	  Say Y here if you are running Linux on any Apple MacBook8,1 or later,
+	  or any MacBookPro13,* or MacBookPro14,*.
+
+	  You will also need to enable appropriate SPI master controllers:
+	  spi_pxa2xx_platform and spi_pxa2xx_pci for MacBook8,1, and
+	  spi_pxa2xx_platform and intel_lpss_pci for the rest.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called applespi.
+
+config KEYBOARD_ATARI
+	tristate "Atari keyboard"
+	depends on ATARI
+	select ATARI_KBD_CORE
+	help
+	  Say Y here if you are running Linux on any Atari and have a keyboard
+	  attached.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atakbd.
+
+config KEYBOARD_ATKBD
+	tristate "AT keyboard"
+	default y
+	select SERIO
+	select SERIO_LIBPS2
+	select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO
+	select SERIO_GSCPS2 if GSC
+	help
+	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
+	  you'll need this, unless you have a different type keyboard (USB, ADB
+	  or other). This also works for AT and PS/2 keyboards connected over a
+	  PS/2 to serial converter.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atkbd.
+
+config KEYBOARD_ATKBD_HP_KEYCODES
+	bool "Use HP keyboard scancodes"
+	depends on PARISC && KEYBOARD_ATKBD
+	default y
+	help
+	  Say Y here if you have a PA-RISC machine and want to use an AT or
+	  PS/2 keyboard, and your keyboard uses keycodes that are specific to
+	  PA-RISC keyboards.
+
+	  Say N if you use a standard keyboard.
+
+config KEYBOARD_ATKBD_RDI_KEYCODES
+	bool "Use PrecisionBook keyboard scancodes"
+	depends on KEYBOARD_ATKBD_HP_KEYCODES
+	default n
+	help
+	  If you have an RDI PrecisionBook, say Y here if you want to use its
+	  built-in keyboard (as opposed to an external keyboard).
+
+	  The PrecisionBook has five keys that conflict with those used by most
+	  AT and PS/2 keyboards. These are as follows:
+
+	    PrecisionBook    Standard AT or PS/2
+
+	    F1               F12
+	    Left Ctrl        Left Alt
+	    Caps Lock        Left Ctrl
+	    Right Ctrl       Caps Lock
+	    Left             102nd key (the key to the right of Left Shift)
+
+	  If you say N here, and use the PrecisionBook keyboard, then each key
+	  in the left-hand column will be interpreted as the corresponding key
+	  in the right-hand column.
+
+	  If you say Y here, and use an external keyboard, then each key in the
+	  right-hand column will be interpreted as the key shown in the
+	  left-hand column.
+
+config KEYBOARD_QT1050
+	tristate "Microchip AT42QT1050 Touch Sensor Chip"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here if you want to use Microchip AT42QT1050 QTouch
+	  Sensor chip as input device.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called qt1050
+
+config KEYBOARD_QT1070
+	tristate "Atmel AT42QT1070 Touch Sensor Chip"
+	depends on I2C
+	help
+	  Say Y here if you want to use Atmel AT42QT1070 QTouch
+	  Sensor chip as input device.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called qt1070
+
+config KEYBOARD_QT2160
+	tristate "Atmel AT42QT2160 Touch Sensor Chip"
+	depends on I2C
+	help
+	  If you say yes here you get support for Atmel AT42QT2160 Touch
+	  Sensor chip as a keyboard input.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called qt2160.
+
+config KEYBOARD_CLPS711X
+	tristate "CLPS711X Keypad support"
+	depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST)
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here to enable the matrix keypad on the Cirrus Logic
+	  CLPS711X CPUs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called clps711x-keypad.
+
+config KEYBOARD_DLINK_DIR685
+	tristate "D-Link DIR-685 touchkeys support"
+	depends on I2C
+	default ARCH_GEMINI
+	help
+	  If you say yes here you get support for the D-Link DIR-685
+	  touchkeys.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dlink-dir685-touchkeys.
+
+config KEYBOARD_LKKBD
+	tristate "DECstation/VAXstation LK201/LK401 keyboard"
+	select SERIO
+	help
+	  Say Y here if you want to use a LK201 or LK401 style serial
+	  keyboard. This keyboard is also useable on PCs if you attach
+	  it with the inputattach program. The connector pinout is
+	  described within lkkbd.c.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lkkbd.
+
+config KEYBOARD_EP93XX
+	tristate "EP93xx Matrix Keypad support"
+	depends on ARCH_EP93XX || COMPILE_TEST
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ep93xx_keypad.
+
+config KEYBOARD_GPIO
+	tristate "GPIO Buttons"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  This driver implements support for buttons connected
+	  to GPIO pins of various CPUs (and some other chips).
+
+	  Say Y here if your device has buttons connected
+	  directly to such GPIO pins.  Your board-specific
+	  setup logic must also provide a platform device,
+	  with configuration data saying which GPIOs are used.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gpio_keys.
+
+config KEYBOARD_GPIO_POLLED
+	tristate "Polled GPIO buttons"
+	depends on GPIOLIB
+	help
+	  This driver implements support for buttons connected
+	  to GPIO pins that are not capable of generating interrupts.
+
+	  Say Y here if your device has buttons connected
+	  directly to such GPIO pins.  Your board-specific
+	  setup logic must also provide a platform device,
+	  with configuration data saying which GPIOs are used.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gpio_keys_polled.
+
+config KEYBOARD_TCA6416
+	tristate "TCA6416/TCA6408A Keypad Support"
+	depends on I2C
+	help
+	  This driver implements basic keypad functionality
+	  for keys connected through TCA6416/TCA6408A IO expanders.
+
+	  Say Y here if your device has keys connected to
+	  TCA6416/TCA6408A IO expander. Your board-specific setup logic
+	  must also provide pin-mask details(of which TCA6416 pins
+	  are used for keypad).
+
+	  If enabled the entire TCA6416 device will be managed through
+	  this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tca6416_keypad.
+
+config KEYBOARD_TCA8418
+	tristate "TCA8418 Keypad Support"
+	depends on I2C
+	select INPUT_MATRIXKMAP
+	help
+	  This driver implements basic keypad functionality
+	  for keys connected through TCA8418 keypad decoder.
+
+	  Say Y here if your device has keys connected to
+	  TCA8418 keypad decoder.
+
+	  If enabled the complete TCA8418 device will be managed through
+	  this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tca8418_keypad.
+
+config KEYBOARD_MATRIX
+	tristate "GPIO driven matrix keypad support"
+	depends on GPIOLIB || COMPILE_TEST
+	select INPUT_MATRIXKMAP
+	help
+	  Enable support for GPIO driven matrix keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called matrix_keypad.
+
+config KEYBOARD_HIL_OLD
+	tristate "HP HIL keyboard support (simple driver)"
+	depends on GSC || HP300
+	default y
+	help
+	  The "Human Interface Loop" is a older, 8-channel USB-like
+	  controller used in several Hewlett Packard models. This driver
+	  was adapted from the one written for m68k/hp300, and implements
+	  support for a keyboard attached to the HIL port, but not for
+	  any other types of HIL input devices like mice or tablets.
+	  However, it has been thoroughly tested and is stable.
+
+	  If you want full HIL support including support for multiple
+	  keyboards, mice, and tablets, you have to enable the
+	  "HP System Device Controller i8042 Support" in the input/serio
+	  submenu.
+
+config KEYBOARD_HIL
+	tristate "HP HIL keyboard/pointer support"
+	depends on GSC || HP300
+	default y
+	select HP_SDC
+	select HIL_MLC
+	select SERIO
+	help
+	  The "Human Interface Loop" is a older, 8-channel USB-like
+	  controller used in several Hewlett Packard models.
+	  This driver implements support for HIL-keyboards and pointing
+	  devices (mice, tablets, touchscreens) attached
+	  to your machine, so normally you should say Y here.
+
+config KEYBOARD_HP6XX
+	tristate "HP Jornada 6xx keyboard"
+	depends on SH_HP6XX
+	help
+	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
+	  support the built-in keyboard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called jornada680_kbd.
+
+config KEYBOARD_HP7XX
+	tristate "HP Jornada 7xx keyboard"
+	depends on SA1100_JORNADA720_SSP && SA1100_SSP
+	help
+	  Say Y here if you have a HP Jornada 710/720/728 and want to
+	  support the built-in keyboard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called jornada720_kbd.
+
+config KEYBOARD_LM8323
+	tristate "LM8323 keypad chip"
+	depends on I2C
+	depends on LEDS_CLASS
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LM8323 keypad controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lm8323.
+
+config KEYBOARD_LM8333
+	tristate "LM8333 keypad chip"
+	depends on I2C
+	select INPUT_MATRIXKMAP
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LM8333 keypad controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lm8333.
+
+config KEYBOARD_LOCOMO
+	tristate "LoCoMo Keyboard Support"
+	depends on SHARP_LOCOMO
+	help
+	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called locomokbd.
+
+config KEYBOARD_LPC32XX
+	tristate "LPC32XX matrix key scanner support"
+	depends on ARCH_LPC32XX && OF
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
+	  connected to a key matrix.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lpc32xx-keys.
+
+config KEYBOARD_MAPLE
+	tristate "Maple bus keyboard"
+	depends on SH_DREAMCAST && MAPLE
+	help
+	  Say Y here if you have a Dreamcast console running Linux and have
+	  a keyboard attached to its Maple bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called maple_keyb.
+
+config KEYBOARD_MAX7359
+	tristate "Maxim MAX7359 Key Switch Controller"
+	select INPUT_MATRIXKMAP
+	depends on I2C
+	help
+	  If you say yes here you get support for the Maxim MAX7359 Key
+	  Switch Controller chip. This providers microprocessors with
+	  management of up to 64 key switches
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max7359_keypad.
+
+config KEYBOARD_MCS
+	tristate "MELFAS MCS Touchkey"
+	depends on I2C
+	help
+	  Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mcs_touchkey.
+
+config KEYBOARD_MPR121
+	tristate "Freescale MPR121 Touchkey"
+	depends on I2C
+	help
+	  Say Y here if you have Freescale MPR121 touchkey controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mpr121_touchkey.
+
+config KEYBOARD_SNVS_PWRKEY
+	tristate "IMX SNVS Power Key Driver"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on OF
+	help
+	  This is the snvs powerkey driver for the Freescale i.MX application
+	  processors.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called snvs_pwrkey.
+
+config KEYBOARD_IMX
+	tristate "IMX keypad support"
+	depends on ARCH_MXC
+	select INPUT_MATRIXKMAP
+	help
+	  Enable support for IMX keypad port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx_keypad.
+
+config KEYBOARD_IMX_SC_KEY
+	tristate "IMX SCU Key Driver"
+	depends on IMX_SCU
+	help
+	  This is the system controller key driver for NXP i.MX SoCs with
+	  system controller inside.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx_sc_key.
+
+config KEYBOARD_NEWTON
+	tristate "Newton keyboard"
+	select SERIO
+	help
+	  Say Y here if you have a Newton keyboard on a serial port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called newtonkbd.
+
+config KEYBOARD_NOMADIK
+	tristate "ST-Ericsson Nomadik SKE keyboard"
+	depends on (ARCH_NOMADIK || ARCH_U8500)
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use a keypad provided on the SKE controller
+	  used on the Ux500 and Nomadik platforms
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nmk-ske-keypad.
+
+config KEYBOARD_NSPIRE
+	tristate "TI-NSPIRE built-in keyboard"
+	depends on ARCH_NSPIRE && OF
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use the built-in keypad on TI-NSPIRE.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nspire-keypad.
+
+config KEYBOARD_TEGRA
+	tristate "NVIDIA Tegra internal matrix keyboard controller support"
+	depends on ARCH_TEGRA && OF
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use a matrix keyboard connected directly
+	  to the internal keyboard controller on Tegra SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tegra-kbc.
+
+config KEYBOARD_OPENCORES
+	tristate "OpenCores Keyboard Controller"
+	depends on HAS_IOMEM
+	help
+	  Say Y here if you want to use the OpenCores Keyboard Controller
+	  http://www.opencores.org/project,keyboardcontroller
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called opencores-kbd.
+
+config KEYBOARD_PXA27x
+	tristate "PXA27x/PXA3xx keypad support"
+	depends on PXA27x || PXA3xx || ARCH_MMP
+	select INPUT_MATRIXKMAP
+	help
+	  Enable support for PXA27x/PXA3xx keypad controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pxa27x_keypad.
+
+config KEYBOARD_PXA930_ROTARY
+	tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
+	depends on CPU_PXA930 || CPU_PXA935
+	help
+	  Enable support for PXA930/PXA935 Enhanced Rotary Controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pxa930_rotary.
+
+config KEYBOARD_PMIC8XXX
+	tristate "Qualcomm PMIC8XXX keypad support"
+	depends on MFD_PM8XXX
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to enable the driver for the PMIC8XXX
+	  keypad provided as a reference design from Qualcomm. This is intended
+	  to support upto 18x8 matrix based keypad design.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called pmic8xxx-keypad.
+
+config KEYBOARD_SAMSUNG
+	tristate "Samsung keypad support"
+	depends on HAS_IOMEM && HAVE_CLK
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use the keypad on your Samsung mobile
+	  device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called samsung-keypad.
+
+config KEYBOARD_GOLDFISH_EVENTS
+	depends on GOLDFISH || COMPILE_TEST
+	tristate "Generic Input Event device for Goldfish"
+	help
+	  Say Y here to get an input event device for the Goldfish virtual
+	  device emulator.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called goldfish-events.
+
+config KEYBOARD_STOWAWAY
+	tristate "Stowaway keyboard"
+	select SERIO
+	help
+	  Say Y here if you have a Stowaway keyboard on a serial port.
+	  Stowaway compatible keyboards like Dicota Input-PDA keyboard
+	  are also supported by this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stowaway.
+
+config KEYBOARD_ST_KEYSCAN
+	tristate "STMicroelectronics keyscan support"
+	depends on ARCH_STI || COMPILE_TEST
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use a keypad attached to the keyscan block
+	  on some STMicroelectronics SoC devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called st-keyscan.
+
+config KEYBOARD_SUNKBD
+	tristate "Sun Type 4 and Type 5 keyboard"
+	select SERIO
+	help
+	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+	  connected either to the Sun keyboard connector or to an serial
+	  (RS-232) port via a simple adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sunkbd.
+
+config KEYBOARD_SH_KEYSC
+	tristate "SuperH KEYSC keypad support"
+	depends on ARCH_SHMOBILE || COMPILE_TEST
+	help
+	  Say Y here if you want to use a keypad attached to the KEYSC block
+	  on SuperH processors such as sh7722 and sh7343.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sh_keysc.
+
+config KEYBOARD_STMPE
+	tristate "STMPE keypad support"
+	depends on MFD_STMPE
+	depends on OF
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use the keypad controller on STMPE I/O
+	  expanders.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called stmpe-keypad.
+
+config KEYBOARD_SUN4I_LRADC
+	tristate "Allwinner sun4i low res adc attached tablet keys support"
+	depends on ARCH_SUNXI
+	help
+	  This selects support for the Allwinner low res adc attached tablet
+	  keys found on Allwinner sunxi SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun4i-lradc-keys.
+
+config KEYBOARD_DAVINCI
+	tristate "TI DaVinci Key Scan"
+	depends on ARCH_DAVINCI_DM365
+	help
+	  Say Y to enable keypad module support for the TI DaVinci
+	  platforms (DM365).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called davinci_keyscan.
+
+config KEYBOARD_IPAQ_MICRO
+	tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
+	depends on MFD_IPAQ_MICRO
+	help
+	  Say Y to enable support for the buttons attached to
+	  Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ipaq-micro-keys.
+
+config KEYBOARD_IQS62X
+	tristate "Azoteq IQS620A/621/622/624/625 keys and switches"
+	depends on MFD_IQS62X
+	help
+	  Say Y here to enable key and switch support for the Azoteq IQS620A,
+	  IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called iqs62x-keys.
+
+config KEYBOARD_OMAP
+	tristate "TI OMAP keypad support"
+	depends on ARCH_OMAP1
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use the OMAP keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called omap-keypad.
+
+config KEYBOARD_OMAP4
+	tristate "TI OMAP4+ keypad support"
+	depends on OF || ARCH_OMAP2PLUS
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use the OMAP4+ keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called omap4-keypad.
+
+config KEYBOARD_SPEAR
+	tristate "ST SPEAR keyboard support"
+	depends on PLAT_SPEAR
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use the SPEAR keyboard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called spear-keyboard.
+
+config KEYBOARD_TC3589X
+	tristate "TC3589X Keypad support"
+	depends on MFD_TC3589X
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use the keypad controller on
+	  TC35892/3 I/O expander.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tc3589x-keypad.
+
+config KEYBOARD_TM2_TOUCHKEY
+	tristate "TM2 touchkey support"
+	depends on I2C
+	depends on LEDS_CLASS
+	help
+	  Say Y here to enable device driver for tm2-touchkey with
+	  LED control for the Exynos5433 TM2 board.
+
+	  To compile this driver as a module, choose M here.
+	  module will be called tm2-touchkey.
+
+config KEYBOARD_TWL4030
+	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
+	depends on TWL4030_CORE
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if your board use the keypad controller on
+	  TWL4030 family chips.  It's safe to say enable this
+	  even on boards that don't use the keypad controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called twl4030_keypad.
+
+config KEYBOARD_XTKBD
+	tristate "XT keyboard"
+	select SERIO
+	help
+	  Say Y here if you want to use the old IBM PC/XT keyboard (or
+	  compatible) on your system. This is only possible with a
+	  parallel port keyboard adapter, you cannot connect it to the
+	  keyboard port on a PC that runs Linux.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xtkbd.
+
+config KEYBOARD_CROS_EC
+	tristate "ChromeOS EC keyboard"
+	select INPUT_MATRIXKMAP
+	depends on CROS_EC
+	help
+	  Say Y here to enable the matrix keyboard used by ChromeOS devices
+	  and implemented on the ChromeOS EC. You must enable one bus option
+	  (CROS_EC_I2C or CROS_EC_SPI) to use this.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_keyb.
+
+config KEYBOARD_CAP11XX
+	tristate "Microchip CAP11XX based touch sensors"
+	depends on OF && I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable the CAP11XX touch sensor driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cap11xx.
+
+config KEYBOARD_BCM
+	tristate "Broadcom keypad driver"
+	depends on OF && HAVE_CLK
+	select INPUT_MATRIXKMAP
+	default ARCH_BCM_CYGNUS
+	help
+	  Say Y here if you want to use Broadcom keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm-keypad.
+
+config KEYBOARD_MTK_PMIC
+	tristate "MediaTek PMIC keys support"
+	depends on MFD_MT6397
+	help
+	  Say Y here if you want to use the pmic keys (powerkey/homekey).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pmic-keys.
+
+endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
new file mode 100644
index 000000000..1d689fdd5
--- /dev/null
+++ b/drivers/input/keyboard/Makefile
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the input core drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_KEYBOARD_ADC)		+= adc-keys.o
+obj-$(CONFIG_KEYBOARD_ADP5520)		+= adp5520-keys.o
+obj-$(CONFIG_KEYBOARD_ADP5588)		+= adp5588-keys.o
+obj-$(CONFIG_KEYBOARD_ADP5589)		+= adp5589-keys.o
+obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
+obj-$(CONFIG_KEYBOARD_APPLESPI)		+= applespi.o
+obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
+obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
+obj-$(CONFIG_KEYBOARD_BCM)		+= bcm-keypad.o
+obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
+obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
+obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
+obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
+obj-$(CONFIG_KEYBOARD_DLINK_DIR685)	+= dlink-dir685-touchkeys.o
+obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS)	+= goldfish_events.o
+obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
+obj-$(CONFIG_KEYBOARD_GPIO_POLLED)	+= gpio_keys_polled.o
+obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o
+obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
+obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
+obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
+obj-$(CONFIG_KEYBOARD_IQS62X)		+= iqs62x-keys.o
+obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
+obj-$(CONFIG_KEYBOARD_IMX_SC_KEY)	+= imx_sc_key.o
+obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
+obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
+obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
+obj-$(CONFIG_KEYBOARD_LM8323)		+= lm8323.o
+obj-$(CONFIG_KEYBOARD_LM8333)		+= lm8333.o
+obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
+obj-$(CONFIG_KEYBOARD_LPC32XX)		+= lpc32xx-keys.o
+obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
+obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
+obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
+obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
+obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
+obj-$(CONFIG_KEYBOARD_MTK_PMIC) 	+= mtk-pmic-keys.o
+obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
+obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
+obj-$(CONFIG_KEYBOARD_NSPIRE)		+= nspire-keypad.o
+obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
+obj-$(CONFIG_KEYBOARD_OMAP4)		+= omap4-keypad.o
+obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o
+obj-$(CONFIG_KEYBOARD_PMIC8XXX)		+= pmic8xxx-keypad.o
+obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
+obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
+obj-$(CONFIG_KEYBOARD_QT1050)           += qt1050.o
+obj-$(CONFIG_KEYBOARD_QT1070)           += qt1070.o
+obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
+obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
+obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
+obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY)	+= snvs_pwrkey.o
+obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
+obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
+obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
+obj-$(CONFIG_KEYBOARD_ST_KEYSCAN)	+= st-keyscan.o
+obj-$(CONFIG_KEYBOARD_SUN4I_LRADC)	+= sun4i-lradc-keys.o
+obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
+obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
+obj-$(CONFIG_KEYBOARD_TEGRA)		+= tegra-kbc.o
+obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY)	+= tm2-touchkey.o
+obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
+obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
diff --git a/drivers/input/keyboard/adc-keys.c b/drivers/input/keyboard/adc-keys.c
new file mode 100644
index 000000000..6d5be48d1
--- /dev/null
+++ b/drivers/input/keyboard/adc-keys.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Input driver for resistor ladder connected on ADC
+ *
+ * Copyright (c) 2016 Alexandre Belloni
+ */
+
+#include <linux/err.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+struct adc_keys_button {
+	u32 voltage;
+	u32 keycode;
+};
+
+struct adc_keys_state {
+	struct iio_channel *channel;
+	u32 num_keys;
+	u32 last_key;
+	u32 keyup_voltage;
+	const struct adc_keys_button *map;
+};
+
+static void adc_keys_poll(struct input_dev *input)
+{
+	struct adc_keys_state *st = input_get_drvdata(input);
+	int i, value, ret;
+	u32 diff, closest = 0xffffffff;
+	int keycode = 0;
+
+	ret = iio_read_channel_processed(st->channel, &value);
+	if (unlikely(ret < 0)) {
+		/* Forcibly release key if any was pressed */
+		value = st->keyup_voltage;
+	} else {
+		for (i = 0; i < st->num_keys; i++) {
+			diff = abs(st->map[i].voltage - value);
+			if (diff < closest) {
+				closest = diff;
+				keycode = st->map[i].keycode;
+			}
+		}
+	}
+
+	if (abs(st->keyup_voltage - value) < closest)
+		keycode = 0;
+
+	if (st->last_key && st->last_key != keycode)
+		input_report_key(input, st->last_key, 0);
+
+	if (keycode)
+		input_report_key(input, keycode, 1);
+
+	input_sync(input);
+	st->last_key = keycode;
+}
+
+static int adc_keys_load_keymap(struct device *dev, struct adc_keys_state *st)
+{
+	struct adc_keys_button *map;
+	struct fwnode_handle *child;
+	int i;
+
+	st->num_keys = device_get_child_node_count(dev);
+	if (st->num_keys == 0) {
+		dev_err(dev, "keymap is missing\n");
+		return -EINVAL;
+	}
+
+	map = devm_kmalloc_array(dev, st->num_keys, sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return -ENOMEM;
+
+	i = 0;
+	device_for_each_child_node(dev, child) {
+		if (fwnode_property_read_u32(child, "press-threshold-microvolt",
+					     &map[i].voltage)) {
+			dev_err(dev, "Key with invalid or missing voltage\n");
+			fwnode_handle_put(child);
+			return -EINVAL;
+		}
+		map[i].voltage /= 1000;
+
+		if (fwnode_property_read_u32(child, "linux,code",
+					     &map[i].keycode)) {
+			dev_err(dev, "Key with invalid or missing linux,code\n");
+			fwnode_handle_put(child);
+			return -EINVAL;
+		}
+
+		i++;
+	}
+
+	st->map = map;
+	return 0;
+}
+
+static int adc_keys_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct adc_keys_state *st;
+	struct input_dev *input;
+	enum iio_chan_type type;
+	int i, value;
+	int error;
+
+	st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	st->channel = devm_iio_channel_get(dev, "buttons");
+	if (IS_ERR(st->channel))
+		return PTR_ERR(st->channel);
+
+	if (!st->channel->indio_dev)
+		return -ENXIO;
+
+	error = iio_get_channel_type(st->channel, &type);
+	if (error < 0)
+		return error;
+
+	if (type != IIO_VOLTAGE) {
+		dev_err(dev, "Incompatible channel type %d\n", type);
+		return -EINVAL;
+	}
+
+	if (device_property_read_u32(dev, "keyup-threshold-microvolt",
+				     &st->keyup_voltage)) {
+		dev_err(dev, "Invalid or missing keyup voltage\n");
+		return -EINVAL;
+	}
+	st->keyup_voltage /= 1000;
+
+	error = adc_keys_load_keymap(dev, st);
+	if (error)
+		return error;
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_set_drvdata(input, st);
+
+	input->name = pdev->name;
+	input->phys = "adc-keys/input0";
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	__set_bit(EV_KEY, input->evbit);
+	for (i = 0; i < st->num_keys; i++)
+		__set_bit(st->map[i].keycode, input->keybit);
+
+	if (device_property_read_bool(dev, "autorepeat"))
+		__set_bit(EV_REP, input->evbit);
+
+
+	error = input_setup_polling(input, adc_keys_poll);
+	if (error) {
+		dev_err(dev, "Unable to set up polling: %d\n", error);
+		return error;
+	}
+
+	if (!device_property_read_u32(dev, "poll-interval", &value))
+		input_set_poll_interval(input, value);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "Unable to register input device: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id adc_keys_of_match[] = {
+	{ .compatible = "adc-keys", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adc_keys_of_match);
+#endif
+
+static struct platform_driver __refdata adc_keys_driver = {
+	.driver = {
+		.name = "adc_keys",
+		.of_match_table = of_match_ptr(adc_keys_of_match),
+	},
+	.probe = adc_keys_probe,
+};
+module_platform_driver(adc_keys_driver);
+
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_DESCRIPTION("Input driver for resistor ladder connected on ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/adp5520-keys.c b/drivers/input/keyboard/adp5520-keys.c
new file mode 100644
index 000000000..7851ffd67
--- /dev/null
+++ b/drivers/input/keyboard/adp5520-keys.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Keypad driver for Analog Devices ADP5520 MFD PMICs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/adp5520.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+struct adp5520_keys {
+	struct input_dev *input;
+	struct notifier_block notifier;
+	struct device *master;
+	unsigned short keycode[ADP5520_KEYMAPSIZE];
+};
+
+static void adp5520_keys_report_event(struct adp5520_keys *dev,
+					unsigned short keymask, int value)
+{
+	int i;
+
+	for (i = 0; i < ADP5520_MAXKEYS; i++)
+		if (keymask & (1 << i))
+			input_report_key(dev->input, dev->keycode[i], value);
+
+	input_sync(dev->input);
+}
+
+static int adp5520_keys_notifier(struct notifier_block *nb,
+				 unsigned long event, void *data)
+{
+	struct adp5520_keys *dev;
+	uint8_t reg_val_lo, reg_val_hi;
+	unsigned short keymask;
+
+	dev = container_of(nb, struct adp5520_keys, notifier);
+
+	if (event & ADP5520_KP_INT) {
+		adp5520_read(dev->master, ADP5520_KP_INT_STAT_1, &reg_val_lo);
+		adp5520_read(dev->master, ADP5520_KP_INT_STAT_2, &reg_val_hi);
+
+		keymask = (reg_val_hi << 8) | reg_val_lo;
+		/* Read twice to clear */
+		adp5520_read(dev->master, ADP5520_KP_INT_STAT_1, &reg_val_lo);
+		adp5520_read(dev->master, ADP5520_KP_INT_STAT_2, &reg_val_hi);
+		keymask |= (reg_val_hi << 8) | reg_val_lo;
+		adp5520_keys_report_event(dev, keymask, 1);
+	}
+
+	if (event & ADP5520_KR_INT) {
+		adp5520_read(dev->master, ADP5520_KR_INT_STAT_1, &reg_val_lo);
+		adp5520_read(dev->master, ADP5520_KR_INT_STAT_2, &reg_val_hi);
+
+		keymask = (reg_val_hi << 8) | reg_val_lo;
+		/* Read twice to clear */
+		adp5520_read(dev->master, ADP5520_KR_INT_STAT_1, &reg_val_lo);
+		adp5520_read(dev->master, ADP5520_KR_INT_STAT_2, &reg_val_hi);
+		keymask |= (reg_val_hi << 8) | reg_val_lo;
+		adp5520_keys_report_event(dev, keymask, 0);
+	}
+
+	return 0;
+}
+
+static int adp5520_keys_probe(struct platform_device *pdev)
+{
+	struct adp5520_keys_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct input_dev *input;
+	struct adp5520_keys *dev;
+	int ret, i;
+	unsigned char en_mask, ctl_mask = 0;
+
+	if (pdev->id != ID_ADP5520) {
+		dev_err(&pdev->dev, "only ADP5520 supports Keypad\n");
+		return -EINVAL;
+	}
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		return -EINVAL;
+	}
+
+	if (!(pdata->rows_en_mask && pdata->cols_en_mask))
+		return -EINVAL;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		dev_err(&pdev->dev, "failed to alloc memory\n");
+		return -ENOMEM;
+	}
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	dev->master = pdev->dev.parent;
+	dev->input = input;
+
+	input->name = pdev->name;
+	input->phys = "adp5520-keys/input0";
+	input->dev.parent = &pdev->dev;
+
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x5520;
+	input->id.version = 0x0001;
+
+	input->keycodesize = sizeof(dev->keycode[0]);
+	input->keycodemax = pdata->keymapsize;
+	input->keycode = dev->keycode;
+
+	memcpy(dev->keycode, pdata->keymap,
+		pdata->keymapsize * input->keycodesize);
+
+	/* setup input device */
+	__set_bit(EV_KEY, input->evbit);
+
+	if (pdata->repeat)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < input->keycodemax; i++)
+		__set_bit(dev->keycode[i], input->keybit);
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	ret = input_register_device(input);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to register input device\n");
+		return ret;
+	}
+
+	en_mask = pdata->rows_en_mask | pdata->cols_en_mask;
+
+	ret = adp5520_set_bits(dev->master, ADP5520_GPIO_CFG_1, en_mask);
+
+	if (en_mask & ADP5520_COL_C3)
+		ctl_mask |= ADP5520_C3_MODE;
+
+	if (en_mask & ADP5520_ROW_R3)
+		ctl_mask |= ADP5520_R3_MODE;
+
+	if (ctl_mask)
+		ret |= adp5520_set_bits(dev->master, ADP5520_LED_CONTROL,
+			ctl_mask);
+
+	ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_PULLUP,
+		pdata->rows_en_mask);
+
+	if (ret) {
+		dev_err(&pdev->dev, "failed to write\n");
+		return -EIO;
+	}
+
+	dev->notifier.notifier_call = adp5520_keys_notifier;
+	ret = adp5520_register_notifier(dev->master, &dev->notifier,
+			ADP5520_KP_IEN | ADP5520_KR_IEN);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register notifier\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, dev);
+	return 0;
+}
+
+static int adp5520_keys_remove(struct platform_device *pdev)
+{
+	struct adp5520_keys *dev = platform_get_drvdata(pdev);
+
+	adp5520_unregister_notifier(dev->master, &dev->notifier,
+				ADP5520_KP_IEN | ADP5520_KR_IEN);
+
+	return 0;
+}
+
+static struct platform_driver adp5520_keys_driver = {
+	.driver	= {
+		.name	= "adp5520-keys",
+	},
+	.probe		= adp5520_keys_probe,
+	.remove		= adp5520_keys_remove,
+};
+module_platform_driver(adp5520_keys_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Keys ADP5520 Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:adp5520-keys");
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
new file mode 100644
index 000000000..90a59b973
--- /dev/null
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -0,0 +1,672 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * File: drivers/input/keyboard/adp5588_keys.c
+ * Description:  keypad driver for ADP5588 and ADP5587
+ *		 I2C QWERTY Keypad and IO Expander
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2008-2010 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <linux/platform_data/adp5588.h>
+
+/* Key Event Register xy */
+#define KEY_EV_PRESSED		(1 << 7)
+#define KEY_EV_MASK		(0x7F)
+
+#define KP_SEL(x)		(0xFFFF >> (16 - x))	/* 2^x-1 */
+
+#define KEYP_MAX_EVENT		10
+
+/*
+ * Early pre 4.0 Silicon required to delay readout by at least 25ms,
+ * since the Event Counter Register updated 25ms after the interrupt
+ * asserted.
+ */
+#define WA_DELAYED_READOUT_REVID(rev)		((rev) < 4)
+
+struct adp5588_kpad {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct delayed_work work;
+	unsigned long delay;
+	unsigned short keycode[ADP5588_KEYMAPSIZE];
+	const struct adp5588_gpi_map *gpimap;
+	unsigned short gpimapsize;
+#ifdef CONFIG_GPIOLIB
+	unsigned char gpiomap[ADP5588_MAXGPIO];
+	bool export_gpio;
+	struct gpio_chip gc;
+	struct mutex gpio_lock;	/* Protect cached dir, dat_out */
+	u8 dat_out[3];
+	u8 dir[3];
+#endif
+};
+
+static int adp5588_read(struct i2c_client *client, u8 reg)
+{
+	int ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		dev_err(&client->dev, "Read Error\n");
+
+	return ret;
+}
+
+static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+#ifdef CONFIG_GPIOLIB
+static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
+	int val;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	if (kpad->dir[bank] & bit)
+		val = kpad->dat_out[bank];
+	else
+		val = adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return !!(val & bit);
+}
+
+static void adp5588_gpio_set_value(struct gpio_chip *chip,
+				   unsigned off, int val)
+{
+	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
+
+	mutex_lock(&kpad->gpio_lock);
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
+			   kpad->dat_out[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+}
+
+static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] &= ~bit;
+	ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int adp5588_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned off, int val)
+{
+	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] |= bit;
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
+				 kpad->dat_out[bank]);
+	ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
+				 kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int adp5588_build_gpiomap(struct adp5588_kpad *kpad,
+				const struct adp5588_kpad_platform_data *pdata)
+{
+	bool pin_used[ADP5588_MAXGPIO];
+	int n_unused = 0;
+	int i;
+
+	memset(pin_used, 0, sizeof(pin_used));
+
+	for (i = 0; i < pdata->rows; i++)
+		pin_used[i] = true;
+
+	for (i = 0; i < pdata->cols; i++)
+		pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
+
+	for (i = 0; i < kpad->gpimapsize; i++)
+		pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
+
+	for (i = 0; i < ADP5588_MAXGPIO; i++)
+		if (!pin_used[i])
+			kpad->gpiomap[n_unused++] = i;
+
+	return n_unused;
+}
+
+static int adp5588_gpio_add(struct adp5588_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5588_kpad_platform_data *pdata = dev_get_platdata(dev);
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int i, error;
+
+	if (!gpio_data)
+		return 0;
+
+	kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
+	if (kpad->gc.ngpio == 0) {
+		dev_info(dev, "No unused gpios left to export\n");
+		return 0;
+	}
+
+	kpad->export_gpio = true;
+
+	kpad->gc.direction_input = adp5588_gpio_direction_input;
+	kpad->gc.direction_output = adp5588_gpio_direction_output;
+	kpad->gc.get = adp5588_gpio_get_value;
+	kpad->gc.set = adp5588_gpio_set_value;
+	kpad->gc.can_sleep = 1;
+
+	kpad->gc.base = gpio_data->gpio_start;
+	kpad->gc.label = kpad->client->name;
+	kpad->gc.owner = THIS_MODULE;
+	kpad->gc.names = gpio_data->names;
+
+	mutex_init(&kpad->gpio_lock);
+
+	error = gpiochip_add_data(&kpad->gc, kpad);
+	if (error) {
+		dev_err(dev, "gpiochip_add failed, err: %d\n", error);
+		return error;
+	}
+
+	for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
+		kpad->dat_out[i] = adp5588_read(kpad->client,
+						GPIO_DAT_OUT1 + i);
+		kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
+	}
+
+	if (gpio_data->setup) {
+		error = gpio_data->setup(kpad->client,
+					 kpad->gc.base, kpad->gc.ngpio,
+					 gpio_data->context);
+		if (error)
+			dev_warn(dev, "setup failed, %d\n", error);
+	}
+
+	return 0;
+}
+
+static void adp5588_gpio_remove(struct adp5588_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5588_kpad_platform_data *pdata = dev_get_platdata(dev);
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int error;
+
+	if (!kpad->export_gpio)
+		return;
+
+	if (gpio_data->teardown) {
+		error = gpio_data->teardown(kpad->client,
+					    kpad->gc.base, kpad->gc.ngpio,
+					    gpio_data->context);
+		if (error)
+			dev_warn(dev, "teardown failed %d\n", error);
+	}
+
+	gpiochip_remove(&kpad->gc);
+}
+#else
+static inline int adp5588_gpio_add(struct adp5588_kpad *kpad)
+{
+	return 0;
+}
+
+static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad)
+{
+}
+#endif
+
+static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
+{
+	int i, j;
+
+	for (i = 0; i < ev_cnt; i++) {
+		int key = adp5588_read(kpad->client, Key_EVENTA + i);
+		int key_val = key & KEY_EV_MASK;
+
+		if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
+			for (j = 0; j < kpad->gpimapsize; j++) {
+				if (key_val == kpad->gpimap[j].pin) {
+					input_report_switch(kpad->input,
+							kpad->gpimap[j].sw_evt,
+							key & KEY_EV_PRESSED);
+					break;
+				}
+			}
+		} else {
+			input_report_key(kpad->input,
+					 kpad->keycode[key_val - 1],
+					 key & KEY_EV_PRESSED);
+		}
+	}
+}
+
+static void adp5588_work(struct work_struct *work)
+{
+	struct adp5588_kpad *kpad = container_of(work,
+						struct adp5588_kpad, work.work);
+	struct i2c_client *client = kpad->client;
+	int status, ev_cnt;
+
+	status = adp5588_read(client, INT_STAT);
+
+	if (status & ADP5588_OVR_FLOW_INT)	/* Unlikely and should never happen */
+		dev_err(&client->dev, "Event Overflow Error\n");
+
+	if (status & ADP5588_KE_INT) {
+		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC;
+		if (ev_cnt) {
+			adp5588_report_events(kpad, ev_cnt);
+			input_sync(kpad->input);
+		}
+	}
+	adp5588_write(client, INT_STAT, status); /* Status is W1C */
+}
+
+static irqreturn_t adp5588_irq(int irq, void *handle)
+{
+	struct adp5588_kpad *kpad = handle;
+
+	/*
+	 * use keventd context to read the event fifo registers
+	 * Schedule readout at least 25ms after notification for
+	 * REVID < 4
+	 */
+
+	schedule_delayed_work(&kpad->work, kpad->delay);
+
+	return IRQ_HANDLED;
+}
+
+static int adp5588_setup(struct i2c_client *client)
+{
+	const struct adp5588_kpad_platform_data *pdata =
+			dev_get_platdata(&client->dev);
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int i, ret;
+	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
+
+	ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
+	ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
+	ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);
+
+	if (pdata->en_keylock) {
+		ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
+		ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
+		ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN);
+	}
+
+	for (i = 0; i < KEYP_MAX_EVENT; i++)
+		ret |= adp5588_read(client, Key_EVENTA);
+
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin <= GPI_PIN_ROW_END) {
+			evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
+		} else {
+			evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
+			evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
+		}
+	}
+
+	if (pdata->gpimapsize) {
+		ret |= adp5588_write(client, GPI_EM1, evt_mode1);
+		ret |= adp5588_write(client, GPI_EM2, evt_mode2);
+		ret |= adp5588_write(client, GPI_EM3, evt_mode3);
+	}
+
+	if (gpio_data) {
+		for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
+			int pull_mask = gpio_data->pullup_dis_mask;
+
+			ret |= adp5588_write(client, GPIO_PULL1 + i,
+				(pull_mask >> (8 * i)) & 0xFF);
+		}
+	}
+
+	ret |= adp5588_write(client, INT_STAT,
+				ADP5588_CMP2_INT | ADP5588_CMP1_INT |
+				ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT |
+				ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */
+
+	ret |= adp5588_write(client, CFG, ADP5588_INT_CFG |
+					  ADP5588_OVR_FLOW_IEN |
+					  ADP5588_KE_IEN);
+
+	if (ret < 0) {
+		dev_err(&client->dev, "Write Error\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void adp5588_report_switch_state(struct adp5588_kpad *kpad)
+{
+	int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
+	int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
+	int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
+	int gpi_stat_tmp, pin_loc;
+	int i;
+
+	for (i = 0; i < kpad->gpimapsize; i++) {
+		unsigned short pin = kpad->gpimap[i].pin;
+
+		if (pin <= GPI_PIN_ROW_END) {
+			gpi_stat_tmp = gpi_stat1;
+			pin_loc = pin - GPI_PIN_ROW_BASE;
+		} else if ((pin - GPI_PIN_COL_BASE) < 8) {
+			gpi_stat_tmp = gpi_stat2;
+			pin_loc = pin - GPI_PIN_COL_BASE;
+		} else {
+			gpi_stat_tmp = gpi_stat3;
+			pin_loc = pin - GPI_PIN_COL_BASE - 8;
+		}
+
+		if (gpi_stat_tmp < 0) {
+			dev_err(&kpad->client->dev,
+				"Can't read GPIO_DAT_STAT switch %d default to OFF\n",
+				pin);
+			gpi_stat_tmp = 0;
+		}
+
+		input_report_switch(kpad->input,
+				    kpad->gpimap[i].sw_evt,
+				    !(gpi_stat_tmp & (1 << pin_loc)));
+	}
+
+	input_sync(kpad->input);
+}
+
+
+static int adp5588_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adp5588_kpad *kpad;
+	const struct adp5588_kpad_platform_data *pdata =
+			dev_get_platdata(&client->dev);
+	struct input_dev *input;
+	unsigned int revid;
+	int ret, i;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+		return -EIO;
+	}
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data?\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
+		dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
+		dev_err(&client->dev, "invalid keymapsize\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->gpimap && pdata->gpimapsize) {
+		dev_err(&client->dev, "invalid gpimap from pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
+		dev_err(&client->dev, "invalid gpimapsize\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
+			dev_err(&client->dev, "invalid gpi pin data\n");
+			return -EINVAL;
+		}
+
+		if (pin <= GPI_PIN_ROW_END) {
+			if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
+				dev_err(&client->dev, "invalid gpi row data\n");
+				return -EINVAL;
+			}
+		} else {
+			if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
+				dev_err(&client->dev, "invalid gpi col data\n");
+				return -EINVAL;
+			}
+		}
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "no IRQ?\n");
+		return -EINVAL;
+	}
+
+	kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!kpad || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	kpad->client = client;
+	kpad->input = input;
+	INIT_DELAYED_WORK(&kpad->work, adp5588_work);
+
+	ret = adp5588_read(client, DEV_ID);
+	if (ret < 0) {
+		error = ret;
+		goto err_free_mem;
+	}
+
+	revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
+	if (WA_DELAYED_READOUT_REVID(revid))
+		kpad->delay = msecs_to_jiffies(30);
+
+	input->name = client->name;
+	input->phys = "adp5588-keys/input0";
+	input->dev.parent = &client->dev;
+
+	input_set_drvdata(input, kpad);
+
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = revid;
+
+	input->keycodesize = sizeof(kpad->keycode[0]);
+	input->keycodemax = pdata->keymapsize;
+	input->keycode = kpad->keycode;
+
+	memcpy(kpad->keycode, pdata->keymap,
+		pdata->keymapsize * input->keycodesize);
+
+	kpad->gpimap = pdata->gpimap;
+	kpad->gpimapsize = pdata->gpimapsize;
+
+	/* setup input device */
+	__set_bit(EV_KEY, input->evbit);
+
+	if (pdata->repeat)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < input->keycodemax; i++)
+		if (kpad->keycode[i] <= KEY_MAX)
+			__set_bit(kpad->keycode[i], input->keybit);
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	if (kpad->gpimapsize)
+		__set_bit(EV_SW, input->evbit);
+	for (i = 0; i < kpad->gpimapsize; i++)
+		__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&client->dev, "unable to register input device\n");
+		goto err_free_mem;
+	}
+
+	error = request_irq(client->irq, adp5588_irq,
+			    IRQF_TRIGGER_FALLING,
+			    client->dev.driver->name, kpad);
+	if (error) {
+		dev_err(&client->dev, "irq %d busy?\n", client->irq);
+		goto err_unreg_dev;
+	}
+
+	error = adp5588_setup(client);
+	if (error)
+		goto err_free_irq;
+
+	if (kpad->gpimapsize)
+		adp5588_report_switch_state(kpad);
+
+	error = adp5588_gpio_add(kpad);
+	if (error)
+		goto err_free_irq;
+
+	device_init_wakeup(&client->dev, 1);
+	i2c_set_clientdata(client, kpad);
+
+	dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
+	return 0;
+
+ err_free_irq:
+	free_irq(client->irq, kpad);
+	cancel_delayed_work_sync(&kpad->work);
+ err_unreg_dev:
+	input_unregister_device(input);
+	input = NULL;
+ err_free_mem:
+	input_free_device(input);
+	kfree(kpad);
+
+	return error;
+}
+
+static int adp5588_remove(struct i2c_client *client)
+{
+	struct adp5588_kpad *kpad = i2c_get_clientdata(client);
+
+	adp5588_write(client, CFG, 0);
+	free_irq(client->irq, kpad);
+	cancel_delayed_work_sync(&kpad->work);
+	input_unregister_device(kpad->input);
+	adp5588_gpio_remove(kpad);
+	kfree(kpad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp5588_suspend(struct device *dev)
+{
+	struct adp5588_kpad *kpad = dev_get_drvdata(dev);
+	struct i2c_client *client = kpad->client;
+
+	disable_irq(client->irq);
+	cancel_delayed_work_sync(&kpad->work);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int adp5588_resume(struct device *dev)
+{
+	struct adp5588_kpad *kpad = dev_get_drvdata(dev);
+	struct i2c_client *client = kpad->client;
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static const struct dev_pm_ops adp5588_dev_pm_ops = {
+	.suspend = adp5588_suspend,
+	.resume  = adp5588_resume,
+};
+#endif
+
+static const struct i2c_device_id adp5588_id[] = {
+	{ "adp5588-keys", 0 },
+	{ "adp5587-keys", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adp5588_id);
+
+static struct i2c_driver adp5588_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+#ifdef CONFIG_PM
+		.pm   = &adp5588_dev_pm_ops,
+#endif
+	},
+	.probe    = adp5588_probe,
+	.remove   = adp5588_remove,
+	.id_table = adp5588_id,
+};
+
+module_i2c_driver(adp5588_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP5588/87 Keypad driver");
diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c
new file mode 100644
index 000000000..eb0e9cd66
--- /dev/null
+++ b/drivers/input/keyboard/adp5589-keys.c
@@ -0,0 +1,1139 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Description:  keypad driver for ADP5589, ADP5585
+ *		 I2C QWERTY Keypad and IO Expander
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2010-2011 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <linux/input/adp5589.h>
+
+/* ADP5589/ADP5585 Common Registers */
+#define ADP5589_5_ID			0x00
+#define ADP5589_5_INT_STATUS		0x01
+#define ADP5589_5_STATUS		0x02
+#define ADP5589_5_FIFO_1		0x03
+#define ADP5589_5_FIFO_2		0x04
+#define ADP5589_5_FIFO_3		0x05
+#define ADP5589_5_FIFO_4		0x06
+#define ADP5589_5_FIFO_5		0x07
+#define ADP5589_5_FIFO_6		0x08
+#define ADP5589_5_FIFO_7		0x09
+#define ADP5589_5_FIFO_8		0x0A
+#define ADP5589_5_FIFO_9		0x0B
+#define ADP5589_5_FIFO_10		0x0C
+#define ADP5589_5_FIFO_11		0x0D
+#define ADP5589_5_FIFO_12		0x0E
+#define ADP5589_5_FIFO_13		0x0F
+#define ADP5589_5_FIFO_14		0x10
+#define ADP5589_5_FIFO_15		0x11
+#define ADP5589_5_FIFO_16		0x12
+#define ADP5589_5_GPI_INT_STAT_A	0x13
+#define ADP5589_5_GPI_INT_STAT_B	0x14
+
+/* ADP5589 Registers */
+#define ADP5589_GPI_INT_STAT_C		0x15
+#define ADP5589_GPI_STATUS_A		0x16
+#define ADP5589_GPI_STATUS_B		0x17
+#define ADP5589_GPI_STATUS_C		0x18
+#define ADP5589_RPULL_CONFIG_A		0x19
+#define ADP5589_RPULL_CONFIG_B		0x1A
+#define ADP5589_RPULL_CONFIG_C		0x1B
+#define ADP5589_RPULL_CONFIG_D		0x1C
+#define ADP5589_RPULL_CONFIG_E		0x1D
+#define ADP5589_GPI_INT_LEVEL_A		0x1E
+#define ADP5589_GPI_INT_LEVEL_B		0x1F
+#define ADP5589_GPI_INT_LEVEL_C		0x20
+#define ADP5589_GPI_EVENT_EN_A		0x21
+#define ADP5589_GPI_EVENT_EN_B		0x22
+#define ADP5589_GPI_EVENT_EN_C		0x23
+#define ADP5589_GPI_INTERRUPT_EN_A	0x24
+#define ADP5589_GPI_INTERRUPT_EN_B	0x25
+#define ADP5589_GPI_INTERRUPT_EN_C	0x26
+#define ADP5589_DEBOUNCE_DIS_A		0x27
+#define ADP5589_DEBOUNCE_DIS_B		0x28
+#define ADP5589_DEBOUNCE_DIS_C		0x29
+#define ADP5589_GPO_DATA_OUT_A		0x2A
+#define ADP5589_GPO_DATA_OUT_B		0x2B
+#define ADP5589_GPO_DATA_OUT_C		0x2C
+#define ADP5589_GPO_OUT_MODE_A		0x2D
+#define ADP5589_GPO_OUT_MODE_B		0x2E
+#define ADP5589_GPO_OUT_MODE_C		0x2F
+#define ADP5589_GPIO_DIRECTION_A	0x30
+#define ADP5589_GPIO_DIRECTION_B	0x31
+#define ADP5589_GPIO_DIRECTION_C	0x32
+#define ADP5589_UNLOCK1			0x33
+#define ADP5589_UNLOCK2			0x34
+#define ADP5589_EXT_LOCK_EVENT		0x35
+#define ADP5589_UNLOCK_TIMERS		0x36
+#define ADP5589_LOCK_CFG		0x37
+#define ADP5589_RESET1_EVENT_A		0x38
+#define ADP5589_RESET1_EVENT_B		0x39
+#define ADP5589_RESET1_EVENT_C		0x3A
+#define ADP5589_RESET2_EVENT_A		0x3B
+#define ADP5589_RESET2_EVENT_B		0x3C
+#define ADP5589_RESET_CFG		0x3D
+#define ADP5589_PWM_OFFT_LOW		0x3E
+#define ADP5589_PWM_OFFT_HIGH		0x3F
+#define ADP5589_PWM_ONT_LOW		0x40
+#define ADP5589_PWM_ONT_HIGH		0x41
+#define ADP5589_PWM_CFG			0x42
+#define ADP5589_CLOCK_DIV_CFG		0x43
+#define ADP5589_LOGIC_1_CFG		0x44
+#define ADP5589_LOGIC_2_CFG		0x45
+#define ADP5589_LOGIC_FF_CFG		0x46
+#define ADP5589_LOGIC_INT_EVENT_EN	0x47
+#define ADP5589_POLL_PTIME_CFG		0x48
+#define ADP5589_PIN_CONFIG_A		0x49
+#define ADP5589_PIN_CONFIG_B		0x4A
+#define ADP5589_PIN_CONFIG_C		0x4B
+#define ADP5589_PIN_CONFIG_D		0x4C
+#define ADP5589_GENERAL_CFG		0x4D
+#define ADP5589_INT_EN			0x4E
+
+/* ADP5585 Registers */
+#define ADP5585_GPI_STATUS_A		0x15
+#define ADP5585_GPI_STATUS_B		0x16
+#define ADP5585_RPULL_CONFIG_A		0x17
+#define ADP5585_RPULL_CONFIG_B		0x18
+#define ADP5585_RPULL_CONFIG_C		0x19
+#define ADP5585_RPULL_CONFIG_D		0x1A
+#define ADP5585_GPI_INT_LEVEL_A		0x1B
+#define ADP5585_GPI_INT_LEVEL_B		0x1C
+#define ADP5585_GPI_EVENT_EN_A		0x1D
+#define ADP5585_GPI_EVENT_EN_B		0x1E
+#define ADP5585_GPI_INTERRUPT_EN_A	0x1F
+#define ADP5585_GPI_INTERRUPT_EN_B	0x20
+#define ADP5585_DEBOUNCE_DIS_A		0x21
+#define ADP5585_DEBOUNCE_DIS_B		0x22
+#define ADP5585_GPO_DATA_OUT_A		0x23
+#define ADP5585_GPO_DATA_OUT_B		0x24
+#define ADP5585_GPO_OUT_MODE_A		0x25
+#define ADP5585_GPO_OUT_MODE_B		0x26
+#define ADP5585_GPIO_DIRECTION_A	0x27
+#define ADP5585_GPIO_DIRECTION_B	0x28
+#define ADP5585_RESET1_EVENT_A		0x29
+#define ADP5585_RESET1_EVENT_B		0x2A
+#define ADP5585_RESET1_EVENT_C		0x2B
+#define ADP5585_RESET2_EVENT_A		0x2C
+#define ADP5585_RESET2_EVENT_B		0x2D
+#define ADP5585_RESET_CFG		0x2E
+#define ADP5585_PWM_OFFT_LOW		0x2F
+#define ADP5585_PWM_OFFT_HIGH		0x30
+#define ADP5585_PWM_ONT_LOW		0x31
+#define ADP5585_PWM_ONT_HIGH		0x32
+#define ADP5585_PWM_CFG			0x33
+#define ADP5585_LOGIC_CFG		0x34
+#define ADP5585_LOGIC_FF_CFG		0x35
+#define ADP5585_LOGIC_INT_EVENT_EN	0x36
+#define ADP5585_POLL_PTIME_CFG		0x37
+#define ADP5585_PIN_CONFIG_A		0x38
+#define ADP5585_PIN_CONFIG_B		0x39
+#define ADP5585_PIN_CONFIG_D		0x3A
+#define ADP5585_GENERAL_CFG		0x3B
+#define ADP5585_INT_EN			0x3C
+
+/* ID Register */
+#define ADP5589_5_DEVICE_ID_MASK	0xF
+#define ADP5589_5_MAN_ID_MASK		0xF
+#define ADP5589_5_MAN_ID_SHIFT		4
+#define ADP5589_5_MAN_ID		0x02
+
+/* GENERAL_CFG Register */
+#define OSC_EN		(1 << 7)
+#define CORE_CLK(x)	(((x) & 0x3) << 5)
+#define LCK_TRK_LOGIC	(1 << 4)	/* ADP5589 only */
+#define LCK_TRK_GPI	(1 << 3)	/* ADP5589 only */
+#define INT_CFG		(1 << 1)
+#define RST_CFG		(1 << 0)
+
+/* INT_EN Register */
+#define LOGIC2_IEN	(1 << 5)	/* ADP5589 only */
+#define LOGIC1_IEN	(1 << 4)
+#define LOCK_IEN	(1 << 3)	/* ADP5589 only */
+#define OVRFLOW_IEN	(1 << 2)
+#define GPI_IEN		(1 << 1)
+#define EVENT_IEN	(1 << 0)
+
+/* Interrupt Status Register */
+#define LOGIC2_INT	(1 << 5)	/* ADP5589 only */
+#define LOGIC1_INT	(1 << 4)
+#define LOCK_INT	(1 << 3)	/* ADP5589 only */
+#define OVRFLOW_INT	(1 << 2)
+#define GPI_INT		(1 << 1)
+#define EVENT_INT	(1 << 0)
+
+/* STATUS Register */
+#define LOGIC2_STAT	(1 << 7)	/* ADP5589 only */
+#define LOGIC1_STAT	(1 << 6)
+#define LOCK_STAT	(1 << 5)	/* ADP5589 only */
+#define KEC		0x1F
+
+/* PIN_CONFIG_D Register */
+#define C4_EXTEND_CFG	(1 << 6)	/* RESET2 */
+#define R4_EXTEND_CFG	(1 << 5)	/* RESET1 */
+
+/* LOCK_CFG */
+#define LOCK_EN		(1 << 0)
+
+#define PTIME_MASK	0x3
+#define LTIME_MASK	0x3		/* ADP5589 only */
+
+/* Key Event Register xy */
+#define KEY_EV_PRESSED		(1 << 7)
+#define KEY_EV_MASK		(0x7F)
+
+#define KEYP_MAX_EVENT		16
+#define ADP5589_MAXGPIO		19
+#define ADP5585_MAXGPIO		11 /* 10 on the ADP5585-01, 11 on ADP5585-02 */
+
+enum {
+	ADP5589,
+	ADP5585_01,
+	ADP5585_02
+};
+
+struct adp_constants {
+	u8 maxgpio;
+	u8 keymapsize;
+	u8 gpi_pin_row_base;
+	u8 gpi_pin_row_end;
+	u8 gpi_pin_col_base;
+	u8 gpi_pin_base;
+	u8 gpi_pin_end;
+	u8 gpimapsize_max;
+	u8 max_row_num;
+	u8 max_col_num;
+	u8 row_mask;
+	u8 col_mask;
+	u8 col_shift;
+	u8 c4_extend_cfg;
+	u8 (*bank) (u8 offset);
+	u8 (*bit) (u8 offset);
+	u8 (*reg) (u8 reg);
+};
+
+struct adp5589_kpad {
+	struct i2c_client *client;
+	struct input_dev *input;
+	const struct adp_constants *var;
+	unsigned short keycode[ADP5589_KEYMAPSIZE];
+	const struct adp5589_gpi_map *gpimap;
+	unsigned short gpimapsize;
+	unsigned extend_cfg;
+	bool is_adp5585;
+	bool support_row5;
+#ifdef CONFIG_GPIOLIB
+	unsigned char gpiomap[ADP5589_MAXGPIO];
+	bool export_gpio;
+	struct gpio_chip gc;
+	struct mutex gpio_lock;	/* Protect cached dir, dat_out */
+	u8 dat_out[3];
+	u8 dir[3];
+#endif
+};
+
+/*
+ *  ADP5589 / ADP5585 derivative / variant handling
+ */
+
+
+/* ADP5589 */
+
+static unsigned char adp5589_bank(unsigned char offset)
+{
+	return offset >> 3;
+}
+
+static unsigned char adp5589_bit(unsigned char offset)
+{
+	return 1u << (offset & 0x7);
+}
+
+static unsigned char adp5589_reg(unsigned char reg)
+{
+	return reg;
+}
+
+static const struct adp_constants const_adp5589 = {
+	.maxgpio		= ADP5589_MAXGPIO,
+	.keymapsize		= ADP5589_KEYMAPSIZE,
+	.gpi_pin_row_base	= ADP5589_GPI_PIN_ROW_BASE,
+	.gpi_pin_row_end	= ADP5589_GPI_PIN_ROW_END,
+	.gpi_pin_col_base	= ADP5589_GPI_PIN_COL_BASE,
+	.gpi_pin_base		= ADP5589_GPI_PIN_BASE,
+	.gpi_pin_end		= ADP5589_GPI_PIN_END,
+	.gpimapsize_max		= ADP5589_GPIMAPSIZE_MAX,
+	.c4_extend_cfg		= 12,
+	.max_row_num		= ADP5589_MAX_ROW_NUM,
+	.max_col_num		= ADP5589_MAX_COL_NUM,
+	.row_mask		= ADP5589_ROW_MASK,
+	.col_mask		= ADP5589_COL_MASK,
+	.col_shift		= ADP5589_COL_SHIFT,
+	.bank			= adp5589_bank,
+	.bit			= adp5589_bit,
+	.reg			= adp5589_reg,
+};
+
+/* ADP5585 */
+
+static unsigned char adp5585_bank(unsigned char offset)
+{
+	return offset > ADP5585_MAX_ROW_NUM;
+}
+
+static unsigned char adp5585_bit(unsigned char offset)
+{
+	return (offset > ADP5585_MAX_ROW_NUM) ?
+		1u << (offset - ADP5585_COL_SHIFT) : 1u << offset;
+}
+
+static const unsigned char adp5585_reg_lut[] = {
+	[ADP5589_GPI_STATUS_A]		= ADP5585_GPI_STATUS_A,
+	[ADP5589_GPI_STATUS_B]		= ADP5585_GPI_STATUS_B,
+	[ADP5589_RPULL_CONFIG_A]	= ADP5585_RPULL_CONFIG_A,
+	[ADP5589_RPULL_CONFIG_B]	= ADP5585_RPULL_CONFIG_B,
+	[ADP5589_RPULL_CONFIG_C]	= ADP5585_RPULL_CONFIG_C,
+	[ADP5589_RPULL_CONFIG_D]	= ADP5585_RPULL_CONFIG_D,
+	[ADP5589_GPI_INT_LEVEL_A]	= ADP5585_GPI_INT_LEVEL_A,
+	[ADP5589_GPI_INT_LEVEL_B]	= ADP5585_GPI_INT_LEVEL_B,
+	[ADP5589_GPI_EVENT_EN_A]	= ADP5585_GPI_EVENT_EN_A,
+	[ADP5589_GPI_EVENT_EN_B]	= ADP5585_GPI_EVENT_EN_B,
+	[ADP5589_GPI_INTERRUPT_EN_A]	= ADP5585_GPI_INTERRUPT_EN_A,
+	[ADP5589_GPI_INTERRUPT_EN_B]	= ADP5585_GPI_INTERRUPT_EN_B,
+	[ADP5589_DEBOUNCE_DIS_A]	= ADP5585_DEBOUNCE_DIS_A,
+	[ADP5589_DEBOUNCE_DIS_B]	= ADP5585_DEBOUNCE_DIS_B,
+	[ADP5589_GPO_DATA_OUT_A]	= ADP5585_GPO_DATA_OUT_A,
+	[ADP5589_GPO_DATA_OUT_B]	= ADP5585_GPO_DATA_OUT_B,
+	[ADP5589_GPO_OUT_MODE_A]	= ADP5585_GPO_OUT_MODE_A,
+	[ADP5589_GPO_OUT_MODE_B]	= ADP5585_GPO_OUT_MODE_B,
+	[ADP5589_GPIO_DIRECTION_A]	= ADP5585_GPIO_DIRECTION_A,
+	[ADP5589_GPIO_DIRECTION_B]	= ADP5585_GPIO_DIRECTION_B,
+	[ADP5589_RESET1_EVENT_A]	= ADP5585_RESET1_EVENT_A,
+	[ADP5589_RESET1_EVENT_B]	= ADP5585_RESET1_EVENT_B,
+	[ADP5589_RESET1_EVENT_C]	= ADP5585_RESET1_EVENT_C,
+	[ADP5589_RESET2_EVENT_A]	= ADP5585_RESET2_EVENT_A,
+	[ADP5589_RESET2_EVENT_B]	= ADP5585_RESET2_EVENT_B,
+	[ADP5589_RESET_CFG]		= ADP5585_RESET_CFG,
+	[ADP5589_PWM_OFFT_LOW]		= ADP5585_PWM_OFFT_LOW,
+	[ADP5589_PWM_OFFT_HIGH]		= ADP5585_PWM_OFFT_HIGH,
+	[ADP5589_PWM_ONT_LOW]		= ADP5585_PWM_ONT_LOW,
+	[ADP5589_PWM_ONT_HIGH]		= ADP5585_PWM_ONT_HIGH,
+	[ADP5589_PWM_CFG]		= ADP5585_PWM_CFG,
+	[ADP5589_LOGIC_1_CFG]		= ADP5585_LOGIC_CFG,
+	[ADP5589_LOGIC_FF_CFG]		= ADP5585_LOGIC_FF_CFG,
+	[ADP5589_LOGIC_INT_EVENT_EN]	= ADP5585_LOGIC_INT_EVENT_EN,
+	[ADP5589_POLL_PTIME_CFG]	= ADP5585_POLL_PTIME_CFG,
+	[ADP5589_PIN_CONFIG_A]		= ADP5585_PIN_CONFIG_A,
+	[ADP5589_PIN_CONFIG_B]		= ADP5585_PIN_CONFIG_B,
+	[ADP5589_PIN_CONFIG_D]		= ADP5585_PIN_CONFIG_D,
+	[ADP5589_GENERAL_CFG]		= ADP5585_GENERAL_CFG,
+	[ADP5589_INT_EN]		= ADP5585_INT_EN,
+};
+
+static unsigned char adp5585_reg(unsigned char reg)
+{
+	return adp5585_reg_lut[reg];
+}
+
+static const struct adp_constants const_adp5585 = {
+	.maxgpio		= ADP5585_MAXGPIO,
+	.keymapsize		= ADP5585_KEYMAPSIZE,
+	.gpi_pin_row_base	= ADP5585_GPI_PIN_ROW_BASE,
+	.gpi_pin_row_end	= ADP5585_GPI_PIN_ROW_END,
+	.gpi_pin_col_base	= ADP5585_GPI_PIN_COL_BASE,
+	.gpi_pin_base		= ADP5585_GPI_PIN_BASE,
+	.gpi_pin_end		= ADP5585_GPI_PIN_END,
+	.gpimapsize_max		= ADP5585_GPIMAPSIZE_MAX,
+	.c4_extend_cfg		= 10,
+	.max_row_num		= ADP5585_MAX_ROW_NUM,
+	.max_col_num		= ADP5585_MAX_COL_NUM,
+	.row_mask		= ADP5585_ROW_MASK,
+	.col_mask		= ADP5585_COL_MASK,
+	.col_shift		= ADP5585_COL_SHIFT,
+	.bank			= adp5585_bank,
+	.bit			= adp5585_bit,
+	.reg			= adp5585_reg,
+};
+
+static int adp5589_read(struct i2c_client *client, u8 reg)
+{
+	int ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		dev_err(&client->dev, "Read Error\n");
+
+	return ret;
+}
+
+static int adp5589_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+#ifdef CONFIG_GPIOLIB
+static int adp5589_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5589_kpad *kpad = gpiochip_get_data(chip);
+	unsigned int bank = kpad->var->bank(kpad->gpiomap[off]);
+	unsigned int bit = kpad->var->bit(kpad->gpiomap[off]);
+
+	return !!(adp5589_read(kpad->client,
+			       kpad->var->reg(ADP5589_GPI_STATUS_A) + bank) &
+			       bit);
+}
+
+static void adp5589_gpio_set_value(struct gpio_chip *chip,
+				   unsigned off, int val)
+{
+	struct adp5589_kpad *kpad = gpiochip_get_data(chip);
+	unsigned int bank = kpad->var->bank(kpad->gpiomap[off]);
+	unsigned int bit = kpad->var->bit(kpad->gpiomap[off]);
+
+	mutex_lock(&kpad->gpio_lock);
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	adp5589_write(kpad->client, kpad->var->reg(ADP5589_GPO_DATA_OUT_A) +
+		      bank, kpad->dat_out[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+}
+
+static int adp5589_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5589_kpad *kpad = gpiochip_get_data(chip);
+	unsigned int bank = kpad->var->bank(kpad->gpiomap[off]);
+	unsigned int bit = kpad->var->bit(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] &= ~bit;
+	ret = adp5589_write(kpad->client,
+			    kpad->var->reg(ADP5589_GPIO_DIRECTION_A) + bank,
+			    kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int adp5589_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned off, int val)
+{
+	struct adp5589_kpad *kpad = gpiochip_get_data(chip);
+	unsigned int bank = kpad->var->bank(kpad->gpiomap[off]);
+	unsigned int bit = kpad->var->bit(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] |= bit;
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	ret = adp5589_write(kpad->client, kpad->var->reg(ADP5589_GPO_DATA_OUT_A)
+			    + bank, kpad->dat_out[bank]);
+	ret |= adp5589_write(kpad->client,
+			     kpad->var->reg(ADP5589_GPIO_DIRECTION_A) + bank,
+			     kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int adp5589_build_gpiomap(struct adp5589_kpad *kpad,
+				const struct adp5589_kpad_platform_data *pdata)
+{
+	bool pin_used[ADP5589_MAXGPIO];
+	int n_unused = 0;
+	int i;
+
+	memset(pin_used, false, sizeof(pin_used));
+
+	for (i = 0; i < kpad->var->maxgpio; i++)
+		if (pdata->keypad_en_mask & (1 << i))
+			pin_used[i] = true;
+
+	for (i = 0; i < kpad->gpimapsize; i++)
+		pin_used[kpad->gpimap[i].pin - kpad->var->gpi_pin_base] = true;
+
+	if (kpad->extend_cfg & R4_EXTEND_CFG)
+		pin_used[4] = true;
+
+	if (kpad->extend_cfg & C4_EXTEND_CFG)
+		pin_used[kpad->var->c4_extend_cfg] = true;
+
+	if (!kpad->support_row5)
+		pin_used[5] = true;
+
+	for (i = 0; i < kpad->var->maxgpio; i++)
+		if (!pin_used[i])
+			kpad->gpiomap[n_unused++] = i;
+
+	return n_unused;
+}
+
+static int adp5589_gpio_add(struct adp5589_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5589_kpad_platform_data *pdata = dev_get_platdata(dev);
+	const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int i, error;
+
+	if (!gpio_data)
+		return 0;
+
+	kpad->gc.parent = dev;
+	kpad->gc.ngpio = adp5589_build_gpiomap(kpad, pdata);
+	if (kpad->gc.ngpio == 0) {
+		dev_info(dev, "No unused gpios left to export\n");
+		return 0;
+	}
+
+	kpad->export_gpio = true;
+
+	kpad->gc.direction_input = adp5589_gpio_direction_input;
+	kpad->gc.direction_output = adp5589_gpio_direction_output;
+	kpad->gc.get = adp5589_gpio_get_value;
+	kpad->gc.set = adp5589_gpio_set_value;
+	kpad->gc.can_sleep = 1;
+
+	kpad->gc.base = gpio_data->gpio_start;
+	kpad->gc.label = kpad->client->name;
+	kpad->gc.owner = THIS_MODULE;
+
+	mutex_init(&kpad->gpio_lock);
+
+	error = gpiochip_add_data(&kpad->gc, kpad);
+	if (error) {
+		dev_err(dev, "gpiochip_add_data() failed, err: %d\n", error);
+		return error;
+	}
+
+	for (i = 0; i <= kpad->var->bank(kpad->var->maxgpio); i++) {
+		kpad->dat_out[i] = adp5589_read(kpad->client, kpad->var->reg(
+						ADP5589_GPO_DATA_OUT_A) + i);
+		kpad->dir[i] = adp5589_read(kpad->client, kpad->var->reg(
+					    ADP5589_GPIO_DIRECTION_A) + i);
+	}
+
+	if (gpio_data->setup) {
+		error = gpio_data->setup(kpad->client,
+					 kpad->gc.base, kpad->gc.ngpio,
+					 gpio_data->context);
+		if (error)
+			dev_warn(dev, "setup failed, %d\n", error);
+	}
+
+	return 0;
+}
+
+static void adp5589_gpio_remove(struct adp5589_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5589_kpad_platform_data *pdata = dev_get_platdata(dev);
+	const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int error;
+
+	if (!kpad->export_gpio)
+		return;
+
+	if (gpio_data->teardown) {
+		error = gpio_data->teardown(kpad->client,
+					    kpad->gc.base, kpad->gc.ngpio,
+					    gpio_data->context);
+		if (error)
+			dev_warn(dev, "teardown failed %d\n", error);
+	}
+
+	gpiochip_remove(&kpad->gc);
+}
+#else
+static inline int adp5589_gpio_add(struct adp5589_kpad *kpad)
+{
+	return 0;
+}
+
+static inline void adp5589_gpio_remove(struct adp5589_kpad *kpad)
+{
+}
+#endif
+
+static void adp5589_report_switches(struct adp5589_kpad *kpad,
+				    int key, int key_val)
+{
+	int i;
+
+	for (i = 0; i < kpad->gpimapsize; i++) {
+		if (key_val == kpad->gpimap[i].pin) {
+			input_report_switch(kpad->input,
+					    kpad->gpimap[i].sw_evt,
+					    key & KEY_EV_PRESSED);
+			break;
+		}
+	}
+}
+
+static void adp5589_report_events(struct adp5589_kpad *kpad, int ev_cnt)
+{
+	int i;
+
+	for (i = 0; i < ev_cnt; i++) {
+		int key = adp5589_read(kpad->client, ADP5589_5_FIFO_1 + i);
+		int key_val = key & KEY_EV_MASK;
+
+		if (key_val >= kpad->var->gpi_pin_base &&
+		    key_val <= kpad->var->gpi_pin_end) {
+			adp5589_report_switches(kpad, key, key_val);
+		} else {
+			input_report_key(kpad->input,
+					 kpad->keycode[key_val - 1],
+					 key & KEY_EV_PRESSED);
+		}
+	}
+}
+
+static irqreturn_t adp5589_irq(int irq, void *handle)
+{
+	struct adp5589_kpad *kpad = handle;
+	struct i2c_client *client = kpad->client;
+	int status, ev_cnt;
+
+	status = adp5589_read(client, ADP5589_5_INT_STATUS);
+
+	if (status & OVRFLOW_INT)	/* Unlikely and should never happen */
+		dev_err(&client->dev, "Event Overflow Error\n");
+
+	if (status & EVENT_INT) {
+		ev_cnt = adp5589_read(client, ADP5589_5_STATUS) & KEC;
+		if (ev_cnt) {
+			adp5589_report_events(kpad, ev_cnt);
+			input_sync(kpad->input);
+		}
+	}
+
+	adp5589_write(client, ADP5589_5_INT_STATUS, status); /* Status is W1C */
+
+	return IRQ_HANDLED;
+}
+
+static int adp5589_get_evcode(struct adp5589_kpad *kpad, unsigned short key)
+{
+	int i;
+
+	for (i = 0; i < kpad->var->keymapsize; i++)
+		if (key == kpad->keycode[i])
+			return (i + 1) | KEY_EV_PRESSED;
+
+	dev_err(&kpad->client->dev, "RESET/UNLOCK key not in keycode map\n");
+
+	return -EINVAL;
+}
+
+static int adp5589_setup(struct adp5589_kpad *kpad)
+{
+	struct i2c_client *client = kpad->client;
+	const struct adp5589_kpad_platform_data *pdata =
+		dev_get_platdata(&client->dev);
+	u8 (*reg) (u8) = kpad->var->reg;
+	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
+	unsigned char pull_mask = 0;
+	int i, ret;
+
+	ret = adp5589_write(client, reg(ADP5589_PIN_CONFIG_A),
+			    pdata->keypad_en_mask & kpad->var->row_mask);
+	ret |= adp5589_write(client, reg(ADP5589_PIN_CONFIG_B),
+			     (pdata->keypad_en_mask >> kpad->var->col_shift) &
+			     kpad->var->col_mask);
+
+	if (!kpad->is_adp5585)
+		ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C,
+				     (pdata->keypad_en_mask >> 16) & 0xFF);
+
+	if (!kpad->is_adp5585 && pdata->en_keylock) {
+		ret |= adp5589_write(client, ADP5589_UNLOCK1,
+				     pdata->unlock_key1);
+		ret |= adp5589_write(client, ADP5589_UNLOCK2,
+				     pdata->unlock_key2);
+		ret |= adp5589_write(client, ADP5589_UNLOCK_TIMERS,
+				     pdata->unlock_timer & LTIME_MASK);
+		ret |= adp5589_write(client, ADP5589_LOCK_CFG, LOCK_EN);
+	}
+
+	for (i = 0; i < KEYP_MAX_EVENT; i++)
+		ret |= adp5589_read(client, ADP5589_5_FIFO_1 + i);
+
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin <= kpad->var->gpi_pin_row_end) {
+			evt_mode1 |= (1 << (pin - kpad->var->gpi_pin_row_base));
+		} else {
+			evt_mode2 |=
+			    ((1 << (pin - kpad->var->gpi_pin_col_base)) & 0xFF);
+			if (!kpad->is_adp5585)
+				evt_mode3 |= ((1 << (pin -
+					kpad->var->gpi_pin_col_base)) >> 8);
+		}
+	}
+
+	if (pdata->gpimapsize) {
+		ret |= adp5589_write(client, reg(ADP5589_GPI_EVENT_EN_A),
+				     evt_mode1);
+		ret |= adp5589_write(client, reg(ADP5589_GPI_EVENT_EN_B),
+				     evt_mode2);
+		if (!kpad->is_adp5585)
+			ret |= adp5589_write(client,
+					     reg(ADP5589_GPI_EVENT_EN_C),
+					     evt_mode3);
+	}
+
+	if (pdata->pull_dis_mask & pdata->pullup_en_100k &
+		pdata->pullup_en_300k & pdata->pulldown_en_300k)
+		dev_warn(&client->dev, "Conflicting pull resistor config\n");
+
+	for (i = 0; i <= kpad->var->max_row_num; i++) {
+		unsigned val = 0, bit = (1 << i);
+		if (pdata->pullup_en_300k & bit)
+			val = 0;
+		else if (pdata->pulldown_en_300k & bit)
+			val = 1;
+		else if (pdata->pullup_en_100k & bit)
+			val = 2;
+		else if (pdata->pull_dis_mask & bit)
+			val = 3;
+
+		pull_mask |= val << (2 * (i & 0x3));
+
+		if (i % 4 == 3 || i == kpad->var->max_row_num) {
+			ret |= adp5589_write(client, reg(ADP5585_RPULL_CONFIG_A)
+					     + (i >> 2), pull_mask);
+			pull_mask = 0;
+		}
+	}
+
+	for (i = 0; i <= kpad->var->max_col_num; i++) {
+		unsigned val = 0, bit = 1 << (i + kpad->var->col_shift);
+		if (pdata->pullup_en_300k & bit)
+			val = 0;
+		else if (pdata->pulldown_en_300k & bit)
+			val = 1;
+		else if (pdata->pullup_en_100k & bit)
+			val = 2;
+		else if (pdata->pull_dis_mask & bit)
+			val = 3;
+
+		pull_mask |= val << (2 * (i & 0x3));
+
+		if (i % 4 == 3 || i == kpad->var->max_col_num) {
+			ret |= adp5589_write(client,
+					     reg(ADP5585_RPULL_CONFIG_C) +
+					     (i >> 2), pull_mask);
+			pull_mask = 0;
+		}
+	}
+
+	if (pdata->reset1_key_1 && pdata->reset1_key_2 && pdata->reset1_key_3) {
+		ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_A),
+				     adp5589_get_evcode(kpad,
+							pdata->reset1_key_1));
+		ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_B),
+				     adp5589_get_evcode(kpad,
+							pdata->reset1_key_2));
+		ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_C),
+				     adp5589_get_evcode(kpad,
+							pdata->reset1_key_3));
+		kpad->extend_cfg |= R4_EXTEND_CFG;
+	}
+
+	if (pdata->reset2_key_1 && pdata->reset2_key_2) {
+		ret |= adp5589_write(client, reg(ADP5589_RESET2_EVENT_A),
+				     adp5589_get_evcode(kpad,
+							pdata->reset2_key_1));
+		ret |= adp5589_write(client, reg(ADP5589_RESET2_EVENT_B),
+				     adp5589_get_evcode(kpad,
+							pdata->reset2_key_2));
+		kpad->extend_cfg |= C4_EXTEND_CFG;
+	}
+
+	if (kpad->extend_cfg) {
+		ret |= adp5589_write(client, reg(ADP5589_RESET_CFG),
+				     pdata->reset_cfg);
+		ret |= adp5589_write(client, reg(ADP5589_PIN_CONFIG_D),
+				     kpad->extend_cfg);
+	}
+
+	ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_A),
+			    pdata->debounce_dis_mask & kpad->var->row_mask);
+
+	ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_B),
+			     (pdata->debounce_dis_mask >> kpad->var->col_shift)
+			     & kpad->var->col_mask);
+
+	if (!kpad->is_adp5585)
+		ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_C),
+				     (pdata->debounce_dis_mask >> 16) & 0xFF);
+
+	ret |= adp5589_write(client, reg(ADP5589_POLL_PTIME_CFG),
+			     pdata->scan_cycle_time & PTIME_MASK);
+	ret |= adp5589_write(client, ADP5589_5_INT_STATUS,
+			     (kpad->is_adp5585 ? 0 : LOGIC2_INT) |
+			     LOGIC1_INT | OVRFLOW_INT |
+			     (kpad->is_adp5585 ? 0 : LOCK_INT) |
+			     GPI_INT | EVENT_INT);	/* Status is W1C */
+
+	ret |= adp5589_write(client, reg(ADP5589_GENERAL_CFG),
+			     INT_CFG | OSC_EN | CORE_CLK(3));
+	ret |= adp5589_write(client, reg(ADP5589_INT_EN),
+			     OVRFLOW_IEN | GPI_IEN | EVENT_IEN);
+
+	if (ret < 0) {
+		dev_err(&client->dev, "Write Error\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void adp5589_report_switch_state(struct adp5589_kpad *kpad)
+{
+	int gpi_stat_tmp, pin_loc;
+	int i;
+	int gpi_stat1 = adp5589_read(kpad->client,
+				     kpad->var->reg(ADP5589_GPI_STATUS_A));
+	int gpi_stat2 = adp5589_read(kpad->client,
+				     kpad->var->reg(ADP5589_GPI_STATUS_B));
+	int gpi_stat3 = !kpad->is_adp5585 ?
+			adp5589_read(kpad->client, ADP5589_GPI_STATUS_C) : 0;
+
+	for (i = 0; i < kpad->gpimapsize; i++) {
+		unsigned short pin = kpad->gpimap[i].pin;
+
+		if (pin <= kpad->var->gpi_pin_row_end) {
+			gpi_stat_tmp = gpi_stat1;
+			pin_loc = pin - kpad->var->gpi_pin_row_base;
+		} else if ((pin - kpad->var->gpi_pin_col_base) < 8) {
+			gpi_stat_tmp = gpi_stat2;
+			pin_loc = pin - kpad->var->gpi_pin_col_base;
+		} else {
+			gpi_stat_tmp = gpi_stat3;
+			pin_loc = pin - kpad->var->gpi_pin_col_base - 8;
+		}
+
+		if (gpi_stat_tmp < 0) {
+			dev_err(&kpad->client->dev,
+				"Can't read GPIO_DAT_STAT switch %d, default to OFF\n",
+				pin);
+			gpi_stat_tmp = 0;
+		}
+
+		input_report_switch(kpad->input,
+				    kpad->gpimap[i].sw_evt,
+				    !(gpi_stat_tmp & (1 << pin_loc)));
+	}
+
+	input_sync(kpad->input);
+}
+
+static int adp5589_keypad_add(struct adp5589_kpad *kpad, unsigned int revid)
+{
+	struct i2c_client *client = kpad->client;
+	const struct adp5589_kpad_platform_data *pdata =
+		dev_get_platdata(&client->dev);
+	struct input_dev *input;
+	unsigned int i;
+	int error;
+
+	if (!((pdata->keypad_en_mask & kpad->var->row_mask) &&
+			(pdata->keypad_en_mask >> kpad->var->col_shift)) ||
+			!pdata->keymap) {
+		dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->keymapsize != kpad->var->keymapsize) {
+		dev_err(&client->dev, "invalid keymapsize\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->gpimap && pdata->gpimapsize) {
+		dev_err(&client->dev, "invalid gpimap from pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->gpimapsize > kpad->var->gpimapsize_max) {
+		dev_err(&client->dev, "invalid gpimapsize\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin < kpad->var->gpi_pin_base ||
+				pin > kpad->var->gpi_pin_end) {
+			dev_err(&client->dev, "invalid gpi pin data\n");
+			return -EINVAL;
+		}
+
+		if ((1 << (pin - kpad->var->gpi_pin_row_base)) &
+				pdata->keypad_en_mask) {
+			dev_err(&client->dev, "invalid gpi row/col data\n");
+			return -EINVAL;
+		}
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "no IRQ?\n");
+		return -EINVAL;
+	}
+
+	input = input_allocate_device();
+	if (!input)
+		return -ENOMEM;
+
+	kpad->input = input;
+
+	input->name = client->name;
+	input->phys = "adp5589-keys/input0";
+	input->dev.parent = &client->dev;
+
+	input_set_drvdata(input, kpad);
+
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = revid;
+
+	input->keycodesize = sizeof(kpad->keycode[0]);
+	input->keycodemax = pdata->keymapsize;
+	input->keycode = kpad->keycode;
+
+	memcpy(kpad->keycode, pdata->keymap,
+	       pdata->keymapsize * input->keycodesize);
+
+	kpad->gpimap = pdata->gpimap;
+	kpad->gpimapsize = pdata->gpimapsize;
+
+	/* setup input device */
+	__set_bit(EV_KEY, input->evbit);
+
+	if (pdata->repeat)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < input->keycodemax; i++)
+		if (kpad->keycode[i] <= KEY_MAX)
+			__set_bit(kpad->keycode[i], input->keybit);
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	if (kpad->gpimapsize)
+		__set_bit(EV_SW, input->evbit);
+	for (i = 0; i < kpad->gpimapsize; i++)
+		__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&client->dev, "unable to register input device\n");
+		goto err_free_input;
+	}
+
+	error = request_threaded_irq(client->irq, NULL, adp5589_irq,
+				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				     client->dev.driver->name, kpad);
+	if (error) {
+		dev_err(&client->dev, "irq %d busy?\n", client->irq);
+		goto err_unreg_dev;
+	}
+
+	device_init_wakeup(&client->dev, 1);
+
+	return 0;
+
+err_unreg_dev:
+	input_unregister_device(input);
+	input = NULL;
+err_free_input:
+	input_free_device(input);
+
+	return error;
+}
+
+static void adp5589_keypad_remove(struct adp5589_kpad *kpad)
+{
+	if (kpad->input) {
+		free_irq(kpad->client->irq, kpad);
+		input_unregister_device(kpad->input);
+	}
+}
+
+static int adp5589_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adp5589_kpad *kpad;
+	const struct adp5589_kpad_platform_data *pdata =
+		dev_get_platdata(&client->dev);
+	unsigned int revid;
+	int error, ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+		return -EIO;
+	}
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data?\n");
+		return -EINVAL;
+	}
+
+	kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
+	if (!kpad)
+		return -ENOMEM;
+
+	kpad->client = client;
+
+	switch (id->driver_data) {
+	case ADP5585_02:
+		kpad->support_row5 = true;
+		fallthrough;
+	case ADP5585_01:
+		kpad->is_adp5585 = true;
+		kpad->var = &const_adp5585;
+		break;
+	case ADP5589:
+		kpad->support_row5 = true;
+		kpad->var = &const_adp5589;
+		break;
+	}
+
+	ret = adp5589_read(client, ADP5589_5_ID);
+	if (ret < 0) {
+		error = ret;
+		goto err_free_mem;
+	}
+
+	revid = (u8) ret & ADP5589_5_DEVICE_ID_MASK;
+
+	if (pdata->keymapsize) {
+		error = adp5589_keypad_add(kpad, revid);
+		if (error)
+			goto err_free_mem;
+	}
+
+	error = adp5589_setup(kpad);
+	if (error)
+		goto err_keypad_remove;
+
+	if (kpad->gpimapsize)
+		adp5589_report_switch_state(kpad);
+
+	error = adp5589_gpio_add(kpad);
+	if (error)
+		goto err_keypad_remove;
+
+	i2c_set_clientdata(client, kpad);
+
+	dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
+	return 0;
+
+err_keypad_remove:
+	adp5589_keypad_remove(kpad);
+err_free_mem:
+	kfree(kpad);
+
+	return error;
+}
+
+static int adp5589_remove(struct i2c_client *client)
+{
+	struct adp5589_kpad *kpad = i2c_get_clientdata(client);
+
+	adp5589_write(client, kpad->var->reg(ADP5589_GENERAL_CFG), 0);
+	adp5589_keypad_remove(kpad);
+	adp5589_gpio_remove(kpad);
+	kfree(kpad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int adp5589_suspend(struct device *dev)
+{
+	struct adp5589_kpad *kpad = dev_get_drvdata(dev);
+	struct i2c_client *client = kpad->client;
+
+	if (!kpad->input)
+		return 0;
+
+	disable_irq(client->irq);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int adp5589_resume(struct device *dev)
+{
+	struct adp5589_kpad *kpad = dev_get_drvdata(dev);
+	struct i2c_client *client = kpad->client;
+
+	if (!kpad->input)
+		return 0;
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(adp5589_dev_pm_ops, adp5589_suspend, adp5589_resume);
+
+static const struct i2c_device_id adp5589_id[] = {
+	{"adp5589-keys", ADP5589},
+	{"adp5585-keys", ADP5585_01},
+	{"adp5585-02-keys", ADP5585_02}, /* Adds ROW5 to ADP5585 */
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, adp5589_id);
+
+static struct i2c_driver adp5589_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.pm = &adp5589_dev_pm_ops,
+	},
+	.probe = adp5589_probe,
+	.remove = adp5589_remove,
+	.id_table = adp5589_id,
+};
+
+module_i2c_driver(adp5589_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP5589/ADP5585 Keypad driver");
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
new file mode 100644
index 000000000..09551f64d
--- /dev/null
+++ b/drivers/input/keyboard/amikbd.c
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *	Hamish Macdonald
+ */
+
+/*
+ * Amiga keyboard driver for Linux/m68k
+ */
+
+/*
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/keyboard.h>
+#include <linux/platform_device.h>
+
+#include <asm/amigaints.h>
+#include <asm/amigahw.h>
+#include <asm/irq.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Amiga keyboard driver");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_HW_CONSOLE
+static unsigned char amikbd_keycode[0x78] __initdata = {
+	[0]	 = KEY_GRAVE,
+	[1]	 = KEY_1,
+	[2]	 = KEY_2,
+	[3]	 = KEY_3,
+	[4]	 = KEY_4,
+	[5]	 = KEY_5,
+	[6]	 = KEY_6,
+	[7]	 = KEY_7,
+	[8]	 = KEY_8,
+	[9]	 = KEY_9,
+	[10]	 = KEY_0,
+	[11]	 = KEY_MINUS,
+	[12]	 = KEY_EQUAL,
+	[13]	 = KEY_BACKSLASH,
+	[15]	 = KEY_KP0,
+	[16]	 = KEY_Q,
+	[17]	 = KEY_W,
+	[18]	 = KEY_E,
+	[19]	 = KEY_R,
+	[20]	 = KEY_T,
+	[21]	 = KEY_Y,
+	[22]	 = KEY_U,
+	[23]	 = KEY_I,
+	[24]	 = KEY_O,
+	[25]	 = KEY_P,
+	[26]	 = KEY_LEFTBRACE,
+	[27]	 = KEY_RIGHTBRACE,
+	[29]	 = KEY_KP1,
+	[30]	 = KEY_KP2,
+	[31]	 = KEY_KP3,
+	[32]	 = KEY_A,
+	[33]	 = KEY_S,
+	[34]	 = KEY_D,
+	[35]	 = KEY_F,
+	[36]	 = KEY_G,
+	[37]	 = KEY_H,
+	[38]	 = KEY_J,
+	[39]	 = KEY_K,
+	[40]	 = KEY_L,
+	[41]	 = KEY_SEMICOLON,
+	[42]	 = KEY_APOSTROPHE,
+	[43]	 = KEY_BACKSLASH,
+	[45]	 = KEY_KP4,
+	[46]	 = KEY_KP5,
+	[47]	 = KEY_KP6,
+	[48]	 = KEY_102ND,
+	[49]	 = KEY_Z,
+	[50]	 = KEY_X,
+	[51]	 = KEY_C,
+	[52]	 = KEY_V,
+	[53]	 = KEY_B,
+	[54]	 = KEY_N,
+	[55]	 = KEY_M,
+	[56]	 = KEY_COMMA,
+	[57]	 = KEY_DOT,
+	[58]	 = KEY_SLASH,
+	[60]	 = KEY_KPDOT,
+	[61]	 = KEY_KP7,
+	[62]	 = KEY_KP8,
+	[63]	 = KEY_KP9,
+	[64]	 = KEY_SPACE,
+	[65]	 = KEY_BACKSPACE,
+	[66]	 = KEY_TAB,
+	[67]	 = KEY_KPENTER,
+	[68]	 = KEY_ENTER,
+	[69]	 = KEY_ESC,
+	[70]	 = KEY_DELETE,
+	[74]	 = KEY_KPMINUS,
+	[76]	 = KEY_UP,
+	[77]	 = KEY_DOWN,
+	[78]	 = KEY_RIGHT,
+	[79]	 = KEY_LEFT,
+	[80]	 = KEY_F1,
+	[81]	 = KEY_F2,
+	[82]	 = KEY_F3,
+	[83]	 = KEY_F4,
+	[84]	 = KEY_F5,
+	[85]	 = KEY_F6,
+	[86]	 = KEY_F7,
+	[87]	 = KEY_F8,
+	[88]	 = KEY_F9,
+	[89]	 = KEY_F10,
+	[90]	 = KEY_KPLEFTPAREN,
+	[91]	 = KEY_KPRIGHTPAREN,
+	[92]	 = KEY_KPSLASH,
+	[93]	 = KEY_KPASTERISK,
+	[94]	 = KEY_KPPLUS,
+	[95]	 = KEY_HELP,
+	[96]	 = KEY_LEFTSHIFT,
+	[97]	 = KEY_RIGHTSHIFT,
+	[98]	 = KEY_CAPSLOCK,
+	[99]	 = KEY_LEFTCTRL,
+	[100]	 = KEY_LEFTALT,
+	[101]	 = KEY_RIGHTALT,
+	[102]	 = KEY_LEFTMETA,
+	[103]	 = KEY_RIGHTMETA
+};
+
+static void __init amikbd_init_console_keymaps(void)
+{
+	/* We can spare 512 bytes on stack for temp_map in init path. */
+	unsigned short temp_map[NR_KEYS];
+	int i, j;
+
+	for (i = 0; i < MAX_NR_KEYMAPS; i++) {
+		if (!key_maps[i])
+			continue;
+		memset(temp_map, 0, sizeof(temp_map));
+		for (j = 0; j < 0x78; j++) {
+			if (!amikbd_keycode[j])
+				continue;
+			temp_map[j] = key_maps[i][amikbd_keycode[j]];
+		}
+		for (j = 0; j < NR_KEYS; j++) {
+			if (!temp_map[j])
+				temp_map[j] = 0xf200;
+		}
+		memcpy(key_maps[i], temp_map, sizeof(temp_map));
+	}
+}
+#else /* !CONFIG_HW_CONSOLE */
+static inline void amikbd_init_console_keymaps(void) {}
+#endif /* !CONFIG_HW_CONSOLE */
+
+static const char *amikbd_messages[8] = {
+	[0] = KERN_ALERT "amikbd: Ctrl-Amiga-Amiga reset warning!!\n",
+	[1] = KERN_WARNING "amikbd: keyboard lost sync\n",
+	[2] = KERN_WARNING "amikbd: keyboard buffer overflow\n",
+	[3] = KERN_WARNING "amikbd: keyboard controller failure\n",
+	[4] = KERN_ERR "amikbd: keyboard selftest failure\n",
+	[5] = KERN_INFO "amikbd: initiate power-up key stream\n",
+	[6] = KERN_INFO "amikbd: terminate power-up key stream\n",
+	[7] = KERN_WARNING "amikbd: keyboard interrupt\n"
+};
+
+static irqreturn_t amikbd_interrupt(int irq, void *data)
+{
+	struct input_dev *dev = data;
+	unsigned char scancode, down;
+
+	scancode = ~ciaa.sdr;		/* get and invert scancode (keyboard is active low) */
+	ciaa.cra |= 0x40;		/* switch SP pin to output for handshake */
+	udelay(85);			/* wait until 85 us have expired */
+	ciaa.cra &= ~0x40;		/* switch CIA serial port to input mode */
+
+	down = !(scancode & 1);		/* lowest bit is release bit */
+	scancode >>= 1;
+
+	if (scancode < 0x78) {		/* scancodes < 0x78 are keys */
+		if (scancode == 98) {	/* CapsLock is a toggle switch key on Amiga */
+			input_report_key(dev, scancode, 1);
+			input_report_key(dev, scancode, 0);
+		} else {
+			input_report_key(dev, scancode, down);
+		}
+
+		input_sync(dev);
+	} else				/* scancodes >= 0x78 are error codes */
+		printk(amikbd_messages[scancode - 0x78]);
+
+	return IRQ_HANDLED;
+}
+
+static int __init amikbd_probe(struct platform_device *pdev)
+{
+	struct input_dev *dev;
+	int i, err;
+
+	dev = input_allocate_device();
+	if (!dev) {
+		dev_err(&pdev->dev, "Not enough memory for input device\n");
+		return -ENOMEM;
+	}
+
+	dev->name = pdev->name;
+	dev->phys = "amikbd/input0";
+	dev->id.bustype = BUS_AMIGA;
+	dev->id.vendor = 0x0001;
+	dev->id.product = 0x0001;
+	dev->id.version = 0x0100;
+	dev->dev.parent = &pdev->dev;
+
+	dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+
+	for (i = 0; i < 0x78; i++)
+		set_bit(i, dev->keybit);
+
+	amikbd_init_console_keymaps();
+
+	ciaa.cra &= ~0x41;	 /* serial data in, turn off TA */
+	err = request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
+			  dev);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(dev);
+	if (err)
+		goto fail3;
+
+	platform_set_drvdata(pdev, dev);
+
+	return 0;
+
+ fail3:	free_irq(IRQ_AMIGA_CIAA_SP, dev);
+ fail2:	input_free_device(dev);
+	return err;
+}
+
+static int __exit amikbd_remove(struct platform_device *pdev)
+{
+	struct input_dev *dev = platform_get_drvdata(pdev);
+
+	free_irq(IRQ_AMIGA_CIAA_SP, dev);
+	input_unregister_device(dev);
+	return 0;
+}
+
+static struct platform_driver amikbd_driver = {
+	.remove = __exit_p(amikbd_remove),
+	.driver   = {
+		.name	= "amiga-keyboard",
+	},
+};
+
+module_platform_driver_probe(amikbd_driver, amikbd_probe);
+
+MODULE_ALIAS("platform:amiga-keyboard");
diff --git a/drivers/input/keyboard/applespi.c b/drivers/input/keyboard/applespi.c
new file mode 100644
index 000000000..0b46bc014
--- /dev/null
+++ b/drivers/input/keyboard/applespi.c
@@ -0,0 +1,1971 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MacBook (Pro) SPI keyboard and touchpad driver
+ *
+ * Copyright (c) 2015-2018 Federico Lorenzi
+ * Copyright (c) 2017-2018 Ronald Tschalär
+ */
+
+/*
+ * The keyboard and touchpad controller on the MacBookAir6, MacBookPro12,
+ * MacBook8 and newer can be driven either by USB or SPI. However the USB
+ * pins are only connected on the MacBookAir6 and 7 and the MacBookPro12.
+ * All others need this driver. The interface is selected using ACPI methods:
+ *
+ * * UIEN ("USB Interface Enable"): If invoked with argument 1, disables SPI
+ *   and enables USB. If invoked with argument 0, disables USB.
+ * * UIST ("USB Interface Status"): Returns 1 if USB is enabled, 0 otherwise.
+ * * SIEN ("SPI Interface Enable"): If invoked with argument 1, disables USB
+ *   and enables SPI. If invoked with argument 0, disables SPI.
+ * * SIST ("SPI Interface Status"): Returns 1 if SPI is enabled, 0 otherwise.
+ * * ISOL: Resets the four GPIO pins used for SPI. Intended to be invoked with
+ *   argument 1, then once more with argument 0.
+ *
+ * UIEN and UIST are only provided on models where the USB pins are connected.
+ *
+ * SPI-based Protocol
+ * ------------------
+ *
+ * The device and driver exchange messages (struct message); each message is
+ * encapsulated in one or more packets (struct spi_packet). There are two types
+ * of exchanges: reads, and writes. A read is signaled by a GPE, upon which one
+ * message can be read from the device. A write exchange consists of writing a
+ * command message, immediately reading a short status packet, and then, upon
+ * receiving a GPE, reading the response message. Write exchanges cannot be
+ * interleaved, i.e. a new write exchange must not be started till the previous
+ * write exchange is complete. Whether a received message is part of a read or
+ * write exchange is indicated in the encapsulating packet's flags field.
+ *
+ * A single message may be too large to fit in a single packet (which has a
+ * fixed, 256-byte size). In that case it will be split over multiple,
+ * consecutive packets.
+ */
+
+#include <linux/acpi.h>
+#include <linux/crc16.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/efi.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/ktime.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/spi/spi.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <asm/barrier.h>
+#include <asm/unaligned.h>
+
+#define CREATE_TRACE_POINTS
+#include "applespi.h"
+#include "applespi_trace.h"
+
+#define APPLESPI_PACKET_SIZE	256
+#define APPLESPI_STATUS_SIZE	4
+
+#define PACKET_TYPE_READ	0x20
+#define PACKET_TYPE_WRITE	0x40
+#define PACKET_DEV_KEYB		0x01
+#define PACKET_DEV_TPAD		0x02
+#define PACKET_DEV_INFO		0xd0
+
+#define MAX_ROLLOVER		6
+
+#define MAX_FINGERS		11
+#define MAX_FINGER_ORIENTATION	16384
+#define MAX_PKTS_PER_MSG	2
+
+#define KBD_BL_LEVEL_MIN	32U
+#define KBD_BL_LEVEL_MAX	255U
+#define KBD_BL_LEVEL_SCALE	1000000U
+#define KBD_BL_LEVEL_ADJ	\
+	((KBD_BL_LEVEL_MAX - KBD_BL_LEVEL_MIN) * KBD_BL_LEVEL_SCALE / 255U)
+
+#define EFI_BL_LEVEL_NAME	L"KeyboardBacklightLevel"
+#define EFI_BL_LEVEL_GUID	EFI_GUID(0xa076d2af, 0x9678, 0x4386, 0x8b, 0x58, 0x1f, 0xc8, 0xef, 0x04, 0x16, 0x19)
+
+#define APPLE_FLAG_FKEY		0x01
+
+#define SPI_RW_CHG_DELAY_US	100	/* from experimentation, in µs */
+
+#define SYNAPTICS_VENDOR_ID	0x06cb
+
+static unsigned int fnmode = 1;
+module_param(fnmode, uint, 0644);
+MODULE_PARM_DESC(fnmode, "Mode of Fn key on Apple keyboards (0 = disabled, [1] = fkeyslast, 2 = fkeysfirst)");
+
+static unsigned int fnremap;
+module_param(fnremap, uint, 0644);
+MODULE_PARM_DESC(fnremap, "Remap Fn key ([0] = no-remap; 1 = left-ctrl, 2 = left-shift, 3 = left-alt, 4 = left-meta, 6 = right-shift, 7 = right-alt, 8 = right-meta)");
+
+static bool iso_layout;
+module_param(iso_layout, bool, 0644);
+MODULE_PARM_DESC(iso_layout, "Enable/Disable hardcoded ISO-layout of the keyboard. ([0] = disabled, 1 = enabled)");
+
+static char touchpad_dimensions[40];
+module_param_string(touchpad_dimensions, touchpad_dimensions,
+		    sizeof(touchpad_dimensions), 0444);
+MODULE_PARM_DESC(touchpad_dimensions, "The pixel dimensions of the touchpad, as XxY+W+H .");
+
+/**
+ * struct keyboard_protocol - keyboard message.
+ * message.type = 0x0110, message.length = 0x000a
+ *
+ * @unknown1:		unknown
+ * @modifiers:		bit-set of modifier/control keys pressed
+ * @unknown2:		unknown
+ * @keys_pressed:	the (non-modifier) keys currently pressed
+ * @fn_pressed:		whether the fn key is currently pressed
+ * @crc16:		crc over the whole message struct (message header +
+ *			this struct) minus this @crc16 field
+ */
+struct keyboard_protocol {
+	u8			unknown1;
+	u8			modifiers;
+	u8			unknown2;
+	u8			keys_pressed[MAX_ROLLOVER];
+	u8			fn_pressed;
+	__le16			crc16;
+};
+
+/**
+ * struct tp_finger - single trackpad finger structure, le16-aligned
+ *
+ * @origin:		zero when switching track finger
+ * @abs_x:		absolute x coordinate
+ * @abs_y:		absolute y coordinate
+ * @rel_x:		relative x coordinate
+ * @rel_y:		relative y coordinate
+ * @tool_major:		tool area, major axis
+ * @tool_minor:		tool area, minor axis
+ * @orientation:	16384 when point, else 15 bit angle
+ * @touch_major:	touch area, major axis
+ * @touch_minor:	touch area, minor axis
+ * @unused:		zeros
+ * @pressure:		pressure on forcetouch touchpad
+ * @multi:		one finger: varies, more fingers: constant
+ * @crc16:		on last finger: crc over the whole message struct
+ *			(i.e. message header + this struct) minus the last
+ *			@crc16 field; unknown on all other fingers.
+ */
+struct tp_finger {
+	__le16 origin;
+	__le16 abs_x;
+	__le16 abs_y;
+	__le16 rel_x;
+	__le16 rel_y;
+	__le16 tool_major;
+	__le16 tool_minor;
+	__le16 orientation;
+	__le16 touch_major;
+	__le16 touch_minor;
+	__le16 unused[2];
+	__le16 pressure;
+	__le16 multi;
+	__le16 crc16;
+};
+
+/**
+ * struct touchpad_protocol - touchpad message.
+ * message.type = 0x0210
+ *
+ * @unknown1:		unknown
+ * @clicked:		1 if a button-click was detected, 0 otherwise
+ * @unknown2:		unknown
+ * @number_of_fingers:	the number of fingers being reported in @fingers
+ * @clicked2:		same as @clicked
+ * @unknown3:		unknown
+ * @fingers:		the data for each finger
+ */
+struct touchpad_protocol {
+	u8			unknown1[1];
+	u8			clicked;
+	u8			unknown2[28];
+	u8			number_of_fingers;
+	u8			clicked2;
+	u8			unknown3[16];
+	struct tp_finger	fingers[];
+};
+
+/**
+ * struct command_protocol_tp_info - get touchpad info.
+ * message.type = 0x1020, message.length = 0x0000
+ *
+ * @crc16:		crc over the whole message struct (message header +
+ *			this struct) minus this @crc16 field
+ */
+struct command_protocol_tp_info {
+	__le16			crc16;
+};
+
+/**
+ * struct touchpad_info - touchpad info response.
+ * message.type = 0x1020, message.length = 0x006e
+ *
+ * @unknown1:		unknown
+ * @model_flags:	flags (vary by model number, but significance otherwise
+ *			unknown)
+ * @model_no:		the touchpad model number
+ * @unknown2:		unknown
+ * @crc16:		crc over the whole message struct (message header +
+ *			this struct) minus this @crc16 field
+ */
+struct touchpad_info_protocol {
+	u8			unknown1[105];
+	u8			model_flags;
+	u8			model_no;
+	u8			unknown2[3];
+	__le16			crc16;
+};
+
+/**
+ * struct command_protocol_mt_init - initialize multitouch.
+ * message.type = 0x0252, message.length = 0x0002
+ *
+ * @cmd:		value: 0x0102
+ * @crc16:		crc over the whole message struct (message header +
+ *			this struct) minus this @crc16 field
+ */
+struct command_protocol_mt_init {
+	__le16			cmd;
+	__le16			crc16;
+};
+
+/**
+ * struct command_protocol_capsl - toggle caps-lock led
+ * message.type = 0x0151, message.length = 0x0002
+ *
+ * @unknown:		value: 0x01 (length?)
+ * @led:		0 off, 2 on
+ * @crc16:		crc over the whole message struct (message header +
+ *			this struct) minus this @crc16 field
+ */
+struct command_protocol_capsl {
+	u8			unknown;
+	u8			led;
+	__le16			crc16;
+};
+
+/**
+ * struct command_protocol_bl - set keyboard backlight brightness
+ * message.type = 0xB051, message.length = 0x0006
+ *
+ * @const1:		value: 0x01B0
+ * @level:		the brightness level to set
+ * @const2:		value: 0x0001 (backlight off), 0x01F4 (backlight on)
+ * @crc16:		crc over the whole message struct (message header +
+ *			this struct) minus this @crc16 field
+ */
+struct command_protocol_bl {
+	__le16			const1;
+	__le16			level;
+	__le16			const2;
+	__le16			crc16;
+};
+
+/**
+ * struct message - a complete spi message.
+ *
+ * Each message begins with fixed header, followed by a message-type specific
+ * payload, and ends with a 16-bit crc. Because of the varying lengths of the
+ * payload, the crc is defined at the end of each payload struct, rather than
+ * in this struct.
+ *
+ * @type:	the message type
+ * @zero:	always 0
+ * @counter:	incremented on each message, rolls over after 255; there is a
+ *		separate counter for each message type.
+ * @rsp_buf_len:response buffer length (the exact nature of this field is quite
+ *		speculative). On a request/write this is often the same as
+ *		@length, though in some cases it has been seen to be much larger
+ *		(e.g. 0x400); on a response/read this the same as on the
+ *		request; for reads that are not responses it is 0.
+ * @length:	length of the remainder of the data in the whole message
+ *		structure (after re-assembly in case of being split over
+ *		multiple spi-packets), minus the trailing crc. The total size
+ *		of the message struct is therefore @length + 10.
+ */
+struct message {
+	__le16		type;
+	u8		zero;
+	u8		counter;
+	__le16		rsp_buf_len;
+	__le16		length;
+	union {
+		struct keyboard_protocol	keyboard;
+		struct touchpad_protocol	touchpad;
+		struct touchpad_info_protocol	tp_info;
+		struct command_protocol_tp_info	tp_info_command;
+		struct command_protocol_mt_init	init_mt_command;
+		struct command_protocol_capsl	capsl_command;
+		struct command_protocol_bl	bl_command;
+		u8				data[0];
+	};
+};
+
+/* type + zero + counter + rsp_buf_len + length */
+#define MSG_HEADER_SIZE		8
+
+/**
+ * struct spi_packet - a complete spi packet; always 256 bytes. This carries
+ * the (parts of the) message in the data. But note that this does not
+ * necessarily contain a complete message, as in some cases (e.g. many
+ * fingers pressed) the message is split over multiple packets (see the
+ * @offset, @remaining, and @length fields). In general the data parts in
+ * spi_packet's are concatenated until @remaining is 0, and the result is an
+ * message.
+ *
+ * @flags:	0x40 = write (to device), 0x20 = read (from device); note that
+ *		the response to a write still has 0x40.
+ * @device:	1 = keyboard, 2 = touchpad
+ * @offset:	specifies the offset of this packet's data in the complete
+ *		message; i.e. > 0 indicates this is a continuation packet (in
+ *		the second packet for a message split over multiple packets
+ *		this would then be the same as the @length in the first packet)
+ * @remaining:	number of message bytes remaining in subsequents packets (in
+ *		the first packet of a message split over two packets this would
+ *		then be the same as the @length in the second packet)
+ * @length:	length of the valid data in the @data in this packet
+ * @data:	all or part of a message
+ * @crc16:	crc over this whole structure minus this @crc16 field. This
+ *		covers just this packet, even on multi-packet messages (in
+ *		contrast to the crc in the message).
+ */
+struct spi_packet {
+	u8			flags;
+	u8			device;
+	__le16			offset;
+	__le16			remaining;
+	__le16			length;
+	u8			data[246];
+	__le16			crc16;
+};
+
+struct spi_settings {
+	u64	spi_cs_delay;		/* cs-to-clk delay in us */
+	u64	reset_a2r_usec;		/* active-to-receive delay? */
+	u64	reset_rec_usec;		/* ? (cur val: 10) */
+};
+
+/* this mimics struct drm_rect */
+struct applespi_tp_info {
+	int	x_min;
+	int	y_min;
+	int	x_max;
+	int	y_max;
+};
+
+struct applespi_data {
+	struct spi_device		*spi;
+	struct spi_settings		spi_settings;
+	struct input_dev		*keyboard_input_dev;
+	struct input_dev		*touchpad_input_dev;
+
+	u8				*tx_buffer;
+	u8				*tx_status;
+	u8				*rx_buffer;
+
+	u8				*msg_buf;
+	unsigned int			saved_msg_len;
+
+	struct applespi_tp_info		tp_info;
+
+	u8				last_keys_pressed[MAX_ROLLOVER];
+	u8				last_keys_fn_pressed[MAX_ROLLOVER];
+	u8				last_fn_pressed;
+	struct input_mt_pos		pos[MAX_FINGERS];
+	int				slots[MAX_FINGERS];
+	int				gpe;
+	acpi_handle			sien;
+	acpi_handle			sist;
+
+	struct spi_transfer		dl_t;
+	struct spi_transfer		rd_t;
+	struct spi_message		rd_m;
+
+	struct spi_transfer		ww_t;
+	struct spi_transfer		wd_t;
+	struct spi_transfer		wr_t;
+	struct spi_transfer		st_t;
+	struct spi_message		wr_m;
+
+	bool				want_tp_info_cmd;
+	bool				want_mt_init_cmd;
+	bool				want_cl_led_on;
+	bool				have_cl_led_on;
+	unsigned int			want_bl_level;
+	unsigned int			have_bl_level;
+	unsigned int			cmd_msg_cntr;
+	/* lock to protect the above parameters and flags below */
+	spinlock_t			cmd_msg_lock;
+	ktime_t				cmd_msg_queued;
+	enum applespi_evt_type		cmd_evt_type;
+
+	struct led_classdev		backlight_info;
+
+	bool				suspended;
+	bool				drain;
+	wait_queue_head_t		drain_complete;
+	bool				read_active;
+	bool				write_active;
+
+	struct work_struct		work;
+	struct touchpad_info_protocol	rcvd_tp_info;
+
+	struct dentry			*debugfs_root;
+	bool				debug_tp_dim;
+	char				tp_dim_val[40];
+	int				tp_dim_min_x;
+	int				tp_dim_max_x;
+	int				tp_dim_min_y;
+	int				tp_dim_max_y;
+};
+
+static const unsigned char applespi_scancodes[] = {
+	0, 0, 0, 0,
+	KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+	KEY_K, KEY_L, KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
+	KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z,
+	KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_0,
+	KEY_ENTER, KEY_ESC, KEY_BACKSPACE, KEY_TAB, KEY_SPACE, KEY_MINUS,
+	KEY_EQUAL, KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, 0,
+	KEY_SEMICOLON, KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, KEY_DOT, KEY_SLASH,
+	KEY_CAPSLOCK,
+	KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_F9,
+	KEY_F10, KEY_F11, KEY_F12, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	KEY_RIGHT, KEY_LEFT, KEY_DOWN, KEY_UP,
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_102ND,
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RO, 0, KEY_YEN, 0, 0, 0, 0, 0,
+	0, KEY_KATAKANAHIRAGANA, KEY_MUHENKAN
+};
+
+/*
+ * This must have exactly as many entries as there are bits in
+ * struct keyboard_protocol.modifiers .
+ */
+static const unsigned char applespi_controlcodes[] = {
+	KEY_LEFTCTRL,
+	KEY_LEFTSHIFT,
+	KEY_LEFTALT,
+	KEY_LEFTMETA,
+	0,
+	KEY_RIGHTSHIFT,
+	KEY_RIGHTALT,
+	KEY_RIGHTMETA
+};
+
+struct applespi_key_translation {
+	u16 from;
+	u16 to;
+	u8 flags;
+};
+
+static const struct applespi_key_translation applespi_fn_codes[] = {
+	{ KEY_BACKSPACE, KEY_DELETE },
+	{ KEY_ENTER,	KEY_INSERT },
+	{ KEY_F1,	KEY_BRIGHTNESSDOWN,	APPLE_FLAG_FKEY },
+	{ KEY_F2,	KEY_BRIGHTNESSUP,	APPLE_FLAG_FKEY },
+	{ KEY_F3,	KEY_SCALE,		APPLE_FLAG_FKEY },
+	{ KEY_F4,	KEY_DASHBOARD,		APPLE_FLAG_FKEY },
+	{ KEY_F5,	KEY_KBDILLUMDOWN,	APPLE_FLAG_FKEY },
+	{ KEY_F6,	KEY_KBDILLUMUP,		APPLE_FLAG_FKEY },
+	{ KEY_F7,	KEY_PREVIOUSSONG,	APPLE_FLAG_FKEY },
+	{ KEY_F8,	KEY_PLAYPAUSE,		APPLE_FLAG_FKEY },
+	{ KEY_F9,	KEY_NEXTSONG,		APPLE_FLAG_FKEY },
+	{ KEY_F10,	KEY_MUTE,		APPLE_FLAG_FKEY },
+	{ KEY_F11,	KEY_VOLUMEDOWN,		APPLE_FLAG_FKEY },
+	{ KEY_F12,	KEY_VOLUMEUP,		APPLE_FLAG_FKEY },
+	{ KEY_RIGHT,	KEY_END },
+	{ KEY_LEFT,	KEY_HOME },
+	{ KEY_DOWN,	KEY_PAGEDOWN },
+	{ KEY_UP,	KEY_PAGEUP },
+	{ }
+};
+
+static const struct applespi_key_translation apple_iso_keyboard[] = {
+	{ KEY_GRAVE,	KEY_102ND },
+	{ KEY_102ND,	KEY_GRAVE },
+	{ }
+};
+
+struct applespi_tp_model_info {
+	u16			model;
+	struct applespi_tp_info	tp_info;
+};
+
+static const struct applespi_tp_model_info applespi_tp_models[] = {
+	{
+		.model = 0x04,	/* MB8 MB9 MB10 */
+		.tp_info = { -5087, -182, 5579, 6089 },
+	},
+	{
+		.model = 0x05,	/* MBP13,1 MBP13,2 MBP14,1 MBP14,2 */
+		.tp_info = { -6243, -170, 6749, 7685 },
+	},
+	{
+		.model = 0x06,	/* MBP13,3 MBP14,3 */
+		.tp_info = { -7456, -163, 7976, 9283 },
+	},
+	{}
+};
+
+typedef void (*applespi_trace_fun)(enum applespi_evt_type,
+				   enum applespi_pkt_type, u8 *, size_t);
+
+static applespi_trace_fun applespi_get_trace_fun(enum applespi_evt_type type)
+{
+	switch (type) {
+	case ET_CMD_TP_INI:
+		return trace_applespi_tp_ini_cmd;
+	case ET_CMD_BL:
+		return trace_applespi_backlight_cmd;
+	case ET_CMD_CL:
+		return trace_applespi_caps_lock_cmd;
+	case ET_RD_KEYB:
+		return trace_applespi_keyboard_data;
+	case ET_RD_TPAD:
+		return trace_applespi_touchpad_data;
+	case ET_RD_UNKN:
+		return trace_applespi_unknown_data;
+	default:
+		WARN_ONCE(1, "Unknown msg type %d", type);
+		return trace_applespi_unknown_data;
+	}
+}
+
+static void applespi_setup_read_txfrs(struct applespi_data *applespi)
+{
+	struct spi_message *msg = &applespi->rd_m;
+	struct spi_transfer *dl_t = &applespi->dl_t;
+	struct spi_transfer *rd_t = &applespi->rd_t;
+
+	memset(dl_t, 0, sizeof(*dl_t));
+	memset(rd_t, 0, sizeof(*rd_t));
+
+	dl_t->delay_usecs = applespi->spi_settings.spi_cs_delay;
+
+	rd_t->rx_buf = applespi->rx_buffer;
+	rd_t->len = APPLESPI_PACKET_SIZE;
+
+	spi_message_init(msg);
+	spi_message_add_tail(dl_t, msg);
+	spi_message_add_tail(rd_t, msg);
+}
+
+static void applespi_setup_write_txfrs(struct applespi_data *applespi)
+{
+	struct spi_message *msg = &applespi->wr_m;
+	struct spi_transfer *wt_t = &applespi->ww_t;
+	struct spi_transfer *dl_t = &applespi->wd_t;
+	struct spi_transfer *wr_t = &applespi->wr_t;
+	struct spi_transfer *st_t = &applespi->st_t;
+
+	memset(wt_t, 0, sizeof(*wt_t));
+	memset(dl_t, 0, sizeof(*dl_t));
+	memset(wr_t, 0, sizeof(*wr_t));
+	memset(st_t, 0, sizeof(*st_t));
+
+	/*
+	 * All we need here is a delay at the beginning of the message before
+	 * asserting cs. But the current spi API doesn't support this, so we
+	 * end up with an extra unnecessary (but harmless) cs assertion and
+	 * deassertion.
+	 */
+	wt_t->delay_usecs = SPI_RW_CHG_DELAY_US;
+	wt_t->cs_change = 1;
+
+	dl_t->delay_usecs = applespi->spi_settings.spi_cs_delay;
+
+	wr_t->tx_buf = applespi->tx_buffer;
+	wr_t->len = APPLESPI_PACKET_SIZE;
+	wr_t->delay_usecs = SPI_RW_CHG_DELAY_US;
+
+	st_t->rx_buf = applespi->tx_status;
+	st_t->len = APPLESPI_STATUS_SIZE;
+
+	spi_message_init(msg);
+	spi_message_add_tail(wt_t, msg);
+	spi_message_add_tail(dl_t, msg);
+	spi_message_add_tail(wr_t, msg);
+	spi_message_add_tail(st_t, msg);
+}
+
+static int applespi_async(struct applespi_data *applespi,
+			  struct spi_message *message, void (*complete)(void *))
+{
+	message->complete = complete;
+	message->context = applespi;
+
+	return spi_async(applespi->spi, message);
+}
+
+static inline bool applespi_check_write_status(struct applespi_data *applespi,
+					       int sts)
+{
+	static u8 status_ok[] = { 0xac, 0x27, 0x68, 0xd5 };
+
+	if (sts < 0) {
+		dev_warn(&applespi->spi->dev, "Error writing to device: %d\n",
+			 sts);
+		return false;
+	}
+
+	if (memcmp(applespi->tx_status, status_ok, APPLESPI_STATUS_SIZE)) {
+		dev_warn(&applespi->spi->dev, "Error writing to device: %*ph\n",
+			 APPLESPI_STATUS_SIZE, applespi->tx_status);
+		return false;
+	}
+
+	return true;
+}
+
+static int applespi_get_spi_settings(struct applespi_data *applespi)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&applespi->spi->dev);
+	const union acpi_object *o;
+	struct spi_settings *settings = &applespi->spi_settings;
+
+	if (!acpi_dev_get_property(adev, "spiCSDelay", ACPI_TYPE_BUFFER, &o))
+		settings->spi_cs_delay = *(u64 *)o->buffer.pointer;
+	else
+		dev_warn(&applespi->spi->dev,
+			 "Property spiCSDelay not found\n");
+
+	if (!acpi_dev_get_property(adev, "resetA2RUsec", ACPI_TYPE_BUFFER, &o))
+		settings->reset_a2r_usec = *(u64 *)o->buffer.pointer;
+	else
+		dev_warn(&applespi->spi->dev,
+			 "Property resetA2RUsec not found\n");
+
+	if (!acpi_dev_get_property(adev, "resetRecUsec", ACPI_TYPE_BUFFER, &o))
+		settings->reset_rec_usec = *(u64 *)o->buffer.pointer;
+	else
+		dev_warn(&applespi->spi->dev,
+			 "Property resetRecUsec not found\n");
+
+	dev_dbg(&applespi->spi->dev,
+		"SPI settings: spi_cs_delay=%llu reset_a2r_usec=%llu reset_rec_usec=%llu\n",
+		settings->spi_cs_delay, settings->reset_a2r_usec,
+		settings->reset_rec_usec);
+
+	return 0;
+}
+
+static int applespi_setup_spi(struct applespi_data *applespi)
+{
+	int sts;
+
+	sts = applespi_get_spi_settings(applespi);
+	if (sts)
+		return sts;
+
+	spin_lock_init(&applespi->cmd_msg_lock);
+	init_waitqueue_head(&applespi->drain_complete);
+
+	return 0;
+}
+
+static int applespi_enable_spi(struct applespi_data *applespi)
+{
+	acpi_status acpi_sts;
+	unsigned long long spi_status;
+
+	/* check if SPI is already enabled, so we can skip the delay below */
+	acpi_sts = acpi_evaluate_integer(applespi->sist, NULL, NULL,
+					 &spi_status);
+	if (ACPI_SUCCESS(acpi_sts) && spi_status)
+		return 0;
+
+	/* SIEN(1) will enable SPI communication */
+	acpi_sts = acpi_execute_simple_method(applespi->sien, NULL, 1);
+	if (ACPI_FAILURE(acpi_sts)) {
+		dev_err(&applespi->spi->dev, "SIEN failed: %s\n",
+			acpi_format_exception(acpi_sts));
+		return -ENODEV;
+	}
+
+	/*
+	 * Allow the SPI interface to come up before returning. Without this
+	 * delay, the SPI commands to enable multitouch mode may not reach
+	 * the trackpad controller, causing pointer movement to break upon
+	 * resume from sleep.
+	 */
+	msleep(50);
+
+	return 0;
+}
+
+static int applespi_send_cmd_msg(struct applespi_data *applespi);
+
+static void applespi_msg_complete(struct applespi_data *applespi,
+				  bool is_write_msg, bool is_read_compl)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
+
+	if (is_read_compl)
+		applespi->read_active = false;
+	if (is_write_msg)
+		applespi->write_active = false;
+
+	if (applespi->drain && !applespi->write_active)
+		wake_up_all(&applespi->drain_complete);
+
+	if (is_write_msg) {
+		applespi->cmd_msg_queued = 0;
+		applespi_send_cmd_msg(applespi);
+	}
+
+	spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
+}
+
+static void applespi_async_write_complete(void *context)
+{
+	struct applespi_data *applespi = context;
+	enum applespi_evt_type evt_type = applespi->cmd_evt_type;
+
+	applespi_get_trace_fun(evt_type)(evt_type, PT_WRITE,
+					 applespi->tx_buffer,
+					 APPLESPI_PACKET_SIZE);
+	applespi_get_trace_fun(evt_type)(evt_type, PT_STATUS,
+					 applespi->tx_status,
+					 APPLESPI_STATUS_SIZE);
+
+	if (!applespi_check_write_status(applespi, applespi->wr_m.status)) {
+		/*
+		 * If we got an error, we presumably won't get the expected
+		 * response message either.
+		 */
+		applespi_msg_complete(applespi, true, false);
+	}
+}
+
+static int applespi_send_cmd_msg(struct applespi_data *applespi)
+{
+	u16 crc;
+	int sts;
+	struct spi_packet *packet = (struct spi_packet *)applespi->tx_buffer;
+	struct message *message = (struct message *)packet->data;
+	u16 msg_len;
+	u8 device;
+
+	/* check if draining */
+	if (applespi->drain)
+		return 0;
+
+	/* check whether send is in progress */
+	if (applespi->cmd_msg_queued) {
+		if (ktime_ms_delta(ktime_get(), applespi->cmd_msg_queued) < 1000)
+			return 0;
+
+		dev_warn(&applespi->spi->dev, "Command %d timed out\n",
+			 applespi->cmd_evt_type);
+
+		applespi->cmd_msg_queued = 0;
+		applespi->write_active = false;
+	}
+
+	/* set up packet */
+	memset(packet, 0, APPLESPI_PACKET_SIZE);
+
+	/* are we processing init commands? */
+	if (applespi->want_tp_info_cmd) {
+		applespi->want_tp_info_cmd = false;
+		applespi->want_mt_init_cmd = true;
+		applespi->cmd_evt_type = ET_CMD_TP_INI;
+
+		/* build init command */
+		device = PACKET_DEV_INFO;
+
+		message->type = cpu_to_le16(0x1020);
+		msg_len = sizeof(message->tp_info_command);
+
+		message->zero = 0x02;
+		message->rsp_buf_len = cpu_to_le16(0x0200);
+
+	} else if (applespi->want_mt_init_cmd) {
+		applespi->want_mt_init_cmd = false;
+		applespi->cmd_evt_type = ET_CMD_TP_INI;
+
+		/* build init command */
+		device = PACKET_DEV_TPAD;
+
+		message->type = cpu_to_le16(0x0252);
+		msg_len = sizeof(message->init_mt_command);
+
+		message->init_mt_command.cmd = cpu_to_le16(0x0102);
+
+	/* do we need caps-lock command? */
+	} else if (applespi->want_cl_led_on != applespi->have_cl_led_on) {
+		applespi->have_cl_led_on = applespi->want_cl_led_on;
+		applespi->cmd_evt_type = ET_CMD_CL;
+
+		/* build led command */
+		device = PACKET_DEV_KEYB;
+
+		message->type = cpu_to_le16(0x0151);
+		msg_len = sizeof(message->capsl_command);
+
+		message->capsl_command.unknown = 0x01;
+		message->capsl_command.led = applespi->have_cl_led_on ? 2 : 0;
+
+	/* do we need backlight command? */
+	} else if (applespi->want_bl_level != applespi->have_bl_level) {
+		applespi->have_bl_level = applespi->want_bl_level;
+		applespi->cmd_evt_type = ET_CMD_BL;
+
+		/* build command buffer */
+		device = PACKET_DEV_KEYB;
+
+		message->type = cpu_to_le16(0xB051);
+		msg_len = sizeof(message->bl_command);
+
+		message->bl_command.const1 = cpu_to_le16(0x01B0);
+		message->bl_command.level =
+				cpu_to_le16(applespi->have_bl_level);
+
+		if (applespi->have_bl_level > 0)
+			message->bl_command.const2 = cpu_to_le16(0x01F4);
+		else
+			message->bl_command.const2 = cpu_to_le16(0x0001);
+
+	/* everything's up-to-date */
+	} else {
+		return 0;
+	}
+
+	/* finalize packet */
+	packet->flags = PACKET_TYPE_WRITE;
+	packet->device = device;
+	packet->length = cpu_to_le16(MSG_HEADER_SIZE + msg_len);
+
+	message->counter = applespi->cmd_msg_cntr++ % (U8_MAX + 1);
+
+	message->length = cpu_to_le16(msg_len - 2);
+	if (!message->rsp_buf_len)
+		message->rsp_buf_len = message->length;
+
+	crc = crc16(0, (u8 *)message, le16_to_cpu(packet->length) - 2);
+	put_unaligned_le16(crc, &message->data[msg_len - 2]);
+
+	crc = crc16(0, (u8 *)packet, sizeof(*packet) - 2);
+	packet->crc16 = cpu_to_le16(crc);
+
+	/* send command */
+	sts = applespi_async(applespi, &applespi->wr_m,
+			     applespi_async_write_complete);
+	if (sts) {
+		dev_warn(&applespi->spi->dev,
+			 "Error queueing async write to device: %d\n", sts);
+		return sts;
+	}
+
+	applespi->cmd_msg_queued = ktime_get_coarse();
+	applespi->write_active = true;
+
+	return 0;
+}
+
+static void applespi_init(struct applespi_data *applespi, bool is_resume)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
+
+	if (is_resume)
+		applespi->want_mt_init_cmd = true;
+	else
+		applespi->want_tp_info_cmd = true;
+	applespi_send_cmd_msg(applespi);
+
+	spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
+}
+
+static int applespi_set_capsl_led(struct applespi_data *applespi,
+				  bool capslock_on)
+{
+	unsigned long flags;
+	int sts;
+
+	spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
+
+	applespi->want_cl_led_on = capslock_on;
+	sts = applespi_send_cmd_msg(applespi);
+
+	spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
+
+	return sts;
+}
+
+static void applespi_set_bl_level(struct led_classdev *led_cdev,
+				  enum led_brightness value)
+{
+	struct applespi_data *applespi =
+		container_of(led_cdev, struct applespi_data, backlight_info);
+	unsigned long flags;
+
+	spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
+
+	if (value == 0) {
+		applespi->want_bl_level = value;
+	} else {
+		/*
+		 * The backlight does not turn on till level 32, so we scale
+		 * the range here so that from a user's perspective it turns
+		 * on at 1.
+		 */
+		applespi->want_bl_level =
+			((value * KBD_BL_LEVEL_ADJ) / KBD_BL_LEVEL_SCALE +
+			 KBD_BL_LEVEL_MIN);
+	}
+
+	applespi_send_cmd_msg(applespi);
+
+	spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
+}
+
+static int applespi_event(struct input_dev *dev, unsigned int type,
+			  unsigned int code, int value)
+{
+	struct applespi_data *applespi = input_get_drvdata(dev);
+
+	switch (type) {
+	case EV_LED:
+		applespi_set_capsl_led(applespi, !!test_bit(LED_CAPSL, dev->led));
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/* lifted from the BCM5974 driver and renamed from raw2int */
+/* convert 16-bit little endian to signed integer */
+static inline int le16_to_int(__le16 x)
+{
+	return (signed short)le16_to_cpu(x);
+}
+
+static void applespi_debug_update_dimensions(struct applespi_data *applespi,
+					     const struct tp_finger *f)
+{
+	applespi->tp_dim_min_x = min(applespi->tp_dim_min_x,
+				     le16_to_int(f->abs_x));
+	applespi->tp_dim_max_x = max(applespi->tp_dim_max_x,
+				     le16_to_int(f->abs_x));
+	applespi->tp_dim_min_y = min(applespi->tp_dim_min_y,
+				     le16_to_int(f->abs_y));
+	applespi->tp_dim_max_y = max(applespi->tp_dim_max_y,
+				     le16_to_int(f->abs_y));
+}
+
+static int applespi_tp_dim_open(struct inode *inode, struct file *file)
+{
+	struct applespi_data *applespi = inode->i_private;
+
+	file->private_data = applespi;
+
+	snprintf(applespi->tp_dim_val, sizeof(applespi->tp_dim_val),
+		 "0x%.4x %dx%d+%u+%u\n",
+		 applespi->touchpad_input_dev->id.product,
+		 applespi->tp_dim_min_x, applespi->tp_dim_min_y,
+		 applespi->tp_dim_max_x - applespi->tp_dim_min_x,
+		 applespi->tp_dim_max_y - applespi->tp_dim_min_y);
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t applespi_tp_dim_read(struct file *file, char __user *buf,
+				    size_t len, loff_t *off)
+{
+	struct applespi_data *applespi = file->private_data;
+
+	return simple_read_from_buffer(buf, len, off, applespi->tp_dim_val,
+				       strlen(applespi->tp_dim_val));
+}
+
+static const struct file_operations applespi_tp_dim_fops = {
+	.owner = THIS_MODULE,
+	.open = applespi_tp_dim_open,
+	.read = applespi_tp_dim_read,
+	.llseek = no_llseek,
+};
+
+static void report_finger_data(struct input_dev *input, int slot,
+			       const struct input_mt_pos *pos,
+			       const struct tp_finger *f)
+{
+	input_mt_slot(input, slot);
+	input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+
+	input_report_abs(input, ABS_MT_TOUCH_MAJOR,
+			 le16_to_int(f->touch_major) << 1);
+	input_report_abs(input, ABS_MT_TOUCH_MINOR,
+			 le16_to_int(f->touch_minor) << 1);
+	input_report_abs(input, ABS_MT_WIDTH_MAJOR,
+			 le16_to_int(f->tool_major) << 1);
+	input_report_abs(input, ABS_MT_WIDTH_MINOR,
+			 le16_to_int(f->tool_minor) << 1);
+	input_report_abs(input, ABS_MT_ORIENTATION,
+			 MAX_FINGER_ORIENTATION - le16_to_int(f->orientation));
+	input_report_abs(input, ABS_MT_POSITION_X, pos->x);
+	input_report_abs(input, ABS_MT_POSITION_Y, pos->y);
+}
+
+static void report_tp_state(struct applespi_data *applespi,
+			    struct touchpad_protocol *t)
+{
+	const struct tp_finger *f;
+	struct input_dev *input;
+	const struct applespi_tp_info *tp_info = &applespi->tp_info;
+	int i, n;
+
+	/* touchpad_input_dev is set async in worker */
+	input = smp_load_acquire(&applespi->touchpad_input_dev);
+	if (!input)
+		return;	/* touchpad isn't initialized yet */
+
+	n = 0;
+
+	for (i = 0; i < t->number_of_fingers; i++) {
+		f = &t->fingers[i];
+		if (le16_to_int(f->touch_major) == 0)
+			continue;
+		applespi->pos[n].x = le16_to_int(f->abs_x);
+		applespi->pos[n].y = tp_info->y_min + tp_info->y_max -
+				     le16_to_int(f->abs_y);
+		n++;
+
+		if (applespi->debug_tp_dim)
+			applespi_debug_update_dimensions(applespi, f);
+	}
+
+	input_mt_assign_slots(input, applespi->slots, applespi->pos, n, 0);
+
+	for (i = 0; i < n; i++)
+		report_finger_data(input, applespi->slots[i],
+				   &applespi->pos[i], &t->fingers[i]);
+
+	input_mt_sync_frame(input);
+	input_report_key(input, BTN_LEFT, t->clicked);
+
+	input_sync(input);
+}
+
+static const struct applespi_key_translation *
+applespi_find_translation(const struct applespi_key_translation *table, u16 key)
+{
+	const struct applespi_key_translation *trans;
+
+	for (trans = table; trans->from; trans++)
+		if (trans->from == key)
+			return trans;
+
+	return NULL;
+}
+
+static unsigned int applespi_translate_fn_key(unsigned int key, int fn_pressed)
+{
+	const struct applespi_key_translation *trans;
+	int do_translate;
+
+	trans = applespi_find_translation(applespi_fn_codes, key);
+	if (trans) {
+		if (trans->flags & APPLE_FLAG_FKEY)
+			do_translate = (fnmode == 2 && fn_pressed) ||
+				       (fnmode == 1 && !fn_pressed);
+		else
+			do_translate = fn_pressed;
+
+		if (do_translate)
+			key = trans->to;
+	}
+
+	return key;
+}
+
+static unsigned int applespi_translate_iso_layout(unsigned int key)
+{
+	const struct applespi_key_translation *trans;
+
+	trans = applespi_find_translation(apple_iso_keyboard, key);
+	if (trans)
+		key = trans->to;
+
+	return key;
+}
+
+static unsigned int applespi_code_to_key(u8 code, int fn_pressed)
+{
+	unsigned int key = applespi_scancodes[code];
+
+	if (fnmode)
+		key = applespi_translate_fn_key(key, fn_pressed);
+	if (iso_layout)
+		key = applespi_translate_iso_layout(key);
+	return key;
+}
+
+static void
+applespi_remap_fn_key(struct keyboard_protocol *keyboard_protocol)
+{
+	unsigned char tmp;
+	u8 bit = BIT((fnremap - 1) & 0x07);
+
+	if (!fnremap || fnremap > ARRAY_SIZE(applespi_controlcodes) ||
+	    !applespi_controlcodes[fnremap - 1])
+		return;
+
+	tmp = keyboard_protocol->fn_pressed;
+	keyboard_protocol->fn_pressed = !!(keyboard_protocol->modifiers & bit);
+	if (tmp)
+		keyboard_protocol->modifiers |= bit;
+	else
+		keyboard_protocol->modifiers &= ~bit;
+}
+
+static void
+applespi_handle_keyboard_event(struct applespi_data *applespi,
+			       struct keyboard_protocol *keyboard_protocol)
+{
+	unsigned int key;
+	int i;
+
+	compiletime_assert(ARRAY_SIZE(applespi_controlcodes) ==
+			   sizeof_field(struct keyboard_protocol, modifiers) * 8,
+			   "applespi_controlcodes has wrong number of entries");
+
+	/* check for rollover overflow, which is signalled by all keys == 1 */
+	if (!memchr_inv(keyboard_protocol->keys_pressed, 1, MAX_ROLLOVER))
+		return;
+
+	/* remap fn key if desired */
+	applespi_remap_fn_key(keyboard_protocol);
+
+	/* check released keys */
+	for (i = 0; i < MAX_ROLLOVER; i++) {
+		if (memchr(keyboard_protocol->keys_pressed,
+			   applespi->last_keys_pressed[i], MAX_ROLLOVER))
+			continue;	/* key is still pressed */
+
+		key = applespi_code_to_key(applespi->last_keys_pressed[i],
+					   applespi->last_keys_fn_pressed[i]);
+		input_report_key(applespi->keyboard_input_dev, key, 0);
+		applespi->last_keys_fn_pressed[i] = 0;
+	}
+
+	/* check pressed keys */
+	for (i = 0; i < MAX_ROLLOVER; i++) {
+		if (keyboard_protocol->keys_pressed[i] <
+				ARRAY_SIZE(applespi_scancodes) &&
+		    keyboard_protocol->keys_pressed[i] > 0) {
+			key = applespi_code_to_key(
+					keyboard_protocol->keys_pressed[i],
+					keyboard_protocol->fn_pressed);
+			input_report_key(applespi->keyboard_input_dev, key, 1);
+			applespi->last_keys_fn_pressed[i] =
+					keyboard_protocol->fn_pressed;
+		}
+	}
+
+	/* check control keys */
+	for (i = 0; i < ARRAY_SIZE(applespi_controlcodes); i++) {
+		if (keyboard_protocol->modifiers & BIT(i))
+			input_report_key(applespi->keyboard_input_dev,
+					 applespi_controlcodes[i], 1);
+		else
+			input_report_key(applespi->keyboard_input_dev,
+					 applespi_controlcodes[i], 0);
+	}
+
+	/* check function key */
+	if (keyboard_protocol->fn_pressed && !applespi->last_fn_pressed)
+		input_report_key(applespi->keyboard_input_dev, KEY_FN, 1);
+	else if (!keyboard_protocol->fn_pressed && applespi->last_fn_pressed)
+		input_report_key(applespi->keyboard_input_dev, KEY_FN, 0);
+	applespi->last_fn_pressed = keyboard_protocol->fn_pressed;
+
+	/* done */
+	input_sync(applespi->keyboard_input_dev);
+	memcpy(&applespi->last_keys_pressed, keyboard_protocol->keys_pressed,
+	       sizeof(applespi->last_keys_pressed));
+}
+
+static const struct applespi_tp_info *applespi_find_touchpad_info(u8 model)
+{
+	const struct applespi_tp_model_info *info;
+
+	for (info = applespi_tp_models; info->model; info++) {
+		if (info->model == model)
+			return &info->tp_info;
+	}
+
+	return NULL;
+}
+
+static int
+applespi_register_touchpad_device(struct applespi_data *applespi,
+				  struct touchpad_info_protocol *rcvd_tp_info)
+{
+	const struct applespi_tp_info *tp_info;
+	struct input_dev *touchpad_input_dev;
+	int sts;
+
+	/* set up touchpad dimensions */
+	tp_info = applespi_find_touchpad_info(rcvd_tp_info->model_no);
+	if (!tp_info) {
+		dev_warn(&applespi->spi->dev,
+			 "Unknown touchpad model %x - falling back to MB8 touchpad\n",
+			 rcvd_tp_info->model_no);
+		tp_info = &applespi_tp_models[0].tp_info;
+	}
+
+	applespi->tp_info = *tp_info;
+
+	if (touchpad_dimensions[0]) {
+		int x, y, w, h;
+
+		sts = sscanf(touchpad_dimensions, "%dx%d+%u+%u", &x, &y, &w, &h);
+		if (sts == 4) {
+			dev_info(&applespi->spi->dev,
+				 "Overriding touchpad dimensions from module param\n");
+			applespi->tp_info.x_min = x;
+			applespi->tp_info.y_min = y;
+			applespi->tp_info.x_max = x + w;
+			applespi->tp_info.y_max = y + h;
+		} else {
+			dev_warn(&applespi->spi->dev,
+				 "Invalid touchpad dimensions '%s': must be in the form XxY+W+H\n",
+				 touchpad_dimensions);
+			touchpad_dimensions[0] = '\0';
+		}
+	}
+	if (!touchpad_dimensions[0]) {
+		snprintf(touchpad_dimensions, sizeof(touchpad_dimensions),
+			 "%dx%d+%u+%u",
+			 applespi->tp_info.x_min,
+			 applespi->tp_info.y_min,
+			 applespi->tp_info.x_max - applespi->tp_info.x_min,
+			 applespi->tp_info.y_max - applespi->tp_info.y_min);
+	}
+
+	/* create touchpad input device */
+	touchpad_input_dev = devm_input_allocate_device(&applespi->spi->dev);
+	if (!touchpad_input_dev) {
+		dev_err(&applespi->spi->dev,
+			"Failed to allocate touchpad input device\n");
+		return -ENOMEM;
+	}
+
+	touchpad_input_dev->name = "Apple SPI Touchpad";
+	touchpad_input_dev->phys = "applespi/input1";
+	touchpad_input_dev->dev.parent = &applespi->spi->dev;
+	touchpad_input_dev->id.bustype = BUS_SPI;
+	touchpad_input_dev->id.vendor = SYNAPTICS_VENDOR_ID;
+	touchpad_input_dev->id.product =
+			rcvd_tp_info->model_no << 8 | rcvd_tp_info->model_flags;
+
+	/* basic properties */
+	input_set_capability(touchpad_input_dev, EV_REL, REL_X);
+	input_set_capability(touchpad_input_dev, EV_REL, REL_Y);
+
+	__set_bit(INPUT_PROP_POINTER, touchpad_input_dev->propbit);
+	__set_bit(INPUT_PROP_BUTTONPAD, touchpad_input_dev->propbit);
+
+	/* finger touch area */
+	input_set_abs_params(touchpad_input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, 5000, 0, 0);
+	input_set_abs_params(touchpad_input_dev, ABS_MT_TOUCH_MINOR,
+			     0, 5000, 0, 0);
+
+	/* finger approach area */
+	input_set_abs_params(touchpad_input_dev, ABS_MT_WIDTH_MAJOR,
+			     0, 5000, 0, 0);
+	input_set_abs_params(touchpad_input_dev, ABS_MT_WIDTH_MINOR,
+			     0, 5000, 0, 0);
+
+	/* finger orientation */
+	input_set_abs_params(touchpad_input_dev, ABS_MT_ORIENTATION,
+			     -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION,
+			     0, 0);
+
+	/* finger position */
+	input_set_abs_params(touchpad_input_dev, ABS_MT_POSITION_X,
+			     applespi->tp_info.x_min, applespi->tp_info.x_max,
+			     0, 0);
+	input_set_abs_params(touchpad_input_dev, ABS_MT_POSITION_Y,
+			     applespi->tp_info.y_min, applespi->tp_info.y_max,
+			     0, 0);
+
+	/* touchpad button */
+	input_set_capability(touchpad_input_dev, EV_KEY, BTN_LEFT);
+
+	/* multitouch */
+	sts = input_mt_init_slots(touchpad_input_dev, MAX_FINGERS,
+				  INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
+					INPUT_MT_TRACK);
+	if (sts) {
+		dev_err(&applespi->spi->dev,
+			"failed to initialize slots: %d", sts);
+		return sts;
+	}
+
+	/* register input device */
+	sts = input_register_device(touchpad_input_dev);
+	if (sts) {
+		dev_err(&applespi->spi->dev,
+			"Unable to register touchpad input device (%d)\n", sts);
+		return sts;
+	}
+
+	/* touchpad_input_dev is read async in spi callback */
+	smp_store_release(&applespi->touchpad_input_dev, touchpad_input_dev);
+
+	return 0;
+}
+
+static void applespi_worker(struct work_struct *work)
+{
+	struct applespi_data *applespi =
+		container_of(work, struct applespi_data, work);
+
+	applespi_register_touchpad_device(applespi, &applespi->rcvd_tp_info);
+}
+
+static void applespi_handle_cmd_response(struct applespi_data *applespi,
+					 struct spi_packet *packet,
+					 struct message *message)
+{
+	if (packet->device == PACKET_DEV_INFO &&
+	    le16_to_cpu(message->type) == 0x1020) {
+		/*
+		 * We're not allowed to sleep here, but registering an input
+		 * device can sleep.
+		 */
+		applespi->rcvd_tp_info = message->tp_info;
+		schedule_work(&applespi->work);
+		return;
+	}
+
+	if (le16_to_cpu(message->length) != 0x0000) {
+		dev_warn_ratelimited(&applespi->spi->dev,
+				     "Received unexpected write response: length=%x\n",
+				     le16_to_cpu(message->length));
+		return;
+	}
+
+	if (packet->device == PACKET_DEV_TPAD &&
+	    le16_to_cpu(message->type) == 0x0252 &&
+	    le16_to_cpu(message->rsp_buf_len) == 0x0002)
+		dev_info(&applespi->spi->dev, "modeswitch done.\n");
+}
+
+static bool applespi_verify_crc(struct applespi_data *applespi, u8 *buffer,
+				size_t buflen)
+{
+	u16 crc;
+
+	crc = crc16(0, buffer, buflen);
+	if (crc) {
+		dev_warn_ratelimited(&applespi->spi->dev,
+				     "Received corrupted packet (crc mismatch)\n");
+		trace_applespi_bad_crc(ET_RD_CRC, READ, buffer, buflen);
+
+		return false;
+	}
+
+	return true;
+}
+
+static void applespi_debug_print_read_packet(struct applespi_data *applespi,
+					     struct spi_packet *packet)
+{
+	unsigned int evt_type;
+
+	if (packet->flags == PACKET_TYPE_READ &&
+	    packet->device == PACKET_DEV_KEYB)
+		evt_type = ET_RD_KEYB;
+	else if (packet->flags == PACKET_TYPE_READ &&
+		 packet->device == PACKET_DEV_TPAD)
+		evt_type = ET_RD_TPAD;
+	else if (packet->flags == PACKET_TYPE_WRITE)
+		evt_type = applespi->cmd_evt_type;
+	else
+		evt_type = ET_RD_UNKN;
+
+	applespi_get_trace_fun(evt_type)(evt_type, PT_READ, applespi->rx_buffer,
+					 APPLESPI_PACKET_SIZE);
+}
+
+static void applespi_got_data(struct applespi_data *applespi)
+{
+	struct spi_packet *packet;
+	struct message *message;
+	unsigned int msg_len;
+	unsigned int off;
+	unsigned int rem;
+	unsigned int len;
+
+	/* process packet header */
+	if (!applespi_verify_crc(applespi, applespi->rx_buffer,
+				 APPLESPI_PACKET_SIZE)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
+
+		if (applespi->drain) {
+			applespi->read_active = false;
+			applespi->write_active = false;
+
+			wake_up_all(&applespi->drain_complete);
+		}
+
+		spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
+
+		return;
+	}
+
+	packet = (struct spi_packet *)applespi->rx_buffer;
+
+	applespi_debug_print_read_packet(applespi, packet);
+
+	off = le16_to_cpu(packet->offset);
+	rem = le16_to_cpu(packet->remaining);
+	len = le16_to_cpu(packet->length);
+
+	if (len > sizeof(packet->data)) {
+		dev_warn_ratelimited(&applespi->spi->dev,
+				     "Received corrupted packet (invalid packet length %u)\n",
+				     len);
+		goto msg_complete;
+	}
+
+	/* handle multi-packet messages */
+	if (rem > 0 || off > 0) {
+		if (off != applespi->saved_msg_len) {
+			dev_warn_ratelimited(&applespi->spi->dev,
+					     "Received unexpected offset (got %u, expected %u)\n",
+					     off, applespi->saved_msg_len);
+			goto msg_complete;
+		}
+
+		if (off + rem > MAX_PKTS_PER_MSG * APPLESPI_PACKET_SIZE) {
+			dev_warn_ratelimited(&applespi->spi->dev,
+					     "Received message too large (size %u)\n",
+					     off + rem);
+			goto msg_complete;
+		}
+
+		if (off + len > MAX_PKTS_PER_MSG * APPLESPI_PACKET_SIZE) {
+			dev_warn_ratelimited(&applespi->spi->dev,
+					     "Received message too large (size %u)\n",
+					     off + len);
+			goto msg_complete;
+		}
+
+		memcpy(applespi->msg_buf + off, &packet->data, len);
+		applespi->saved_msg_len += len;
+
+		if (rem > 0)
+			return;
+
+		message = (struct message *)applespi->msg_buf;
+		msg_len = applespi->saved_msg_len;
+	} else {
+		message = (struct message *)&packet->data;
+		msg_len = len;
+	}
+
+	/* got complete message - verify */
+	if (!applespi_verify_crc(applespi, (u8 *)message, msg_len))
+		goto msg_complete;
+
+	if (le16_to_cpu(message->length) != msg_len - MSG_HEADER_SIZE - 2) {
+		dev_warn_ratelimited(&applespi->spi->dev,
+				     "Received corrupted packet (invalid message length %u - expected %u)\n",
+				     le16_to_cpu(message->length),
+				     msg_len - MSG_HEADER_SIZE - 2);
+		goto msg_complete;
+	}
+
+	/* handle message */
+	if (packet->flags == PACKET_TYPE_READ &&
+	    packet->device == PACKET_DEV_KEYB) {
+		applespi_handle_keyboard_event(applespi, &message->keyboard);
+
+	} else if (packet->flags == PACKET_TYPE_READ &&
+		   packet->device == PACKET_DEV_TPAD) {
+		struct touchpad_protocol *tp;
+		size_t tp_len;
+
+		tp = &message->touchpad;
+		tp_len = struct_size(tp, fingers, tp->number_of_fingers);
+
+		if (le16_to_cpu(message->length) + 2 != tp_len) {
+			dev_warn_ratelimited(&applespi->spi->dev,
+					     "Received corrupted packet (invalid message length %u - num-fingers %u, tp-len %zu)\n",
+					     le16_to_cpu(message->length),
+					     tp->number_of_fingers, tp_len);
+			goto msg_complete;
+		}
+
+		if (tp->number_of_fingers > MAX_FINGERS) {
+			dev_warn_ratelimited(&applespi->spi->dev,
+					     "Number of reported fingers (%u) exceeds max (%u))\n",
+					     tp->number_of_fingers,
+					     MAX_FINGERS);
+			tp->number_of_fingers = MAX_FINGERS;
+		}
+
+		report_tp_state(applespi, tp);
+
+	} else if (packet->flags == PACKET_TYPE_WRITE) {
+		applespi_handle_cmd_response(applespi, packet, message);
+	}
+
+msg_complete:
+	applespi->saved_msg_len = 0;
+
+	applespi_msg_complete(applespi, packet->flags == PACKET_TYPE_WRITE,
+			      true);
+}
+
+static void applespi_async_read_complete(void *context)
+{
+	struct applespi_data *applespi = context;
+
+	if (applespi->rd_m.status < 0) {
+		dev_warn(&applespi->spi->dev, "Error reading from device: %d\n",
+			 applespi->rd_m.status);
+		/*
+		 * We don't actually know if this was a pure read, or a response
+		 * to a write. But this is a rare error condition that should
+		 * never occur, so clearing both flags to avoid deadlock.
+		 */
+		applespi_msg_complete(applespi, true, true);
+	} else {
+		applespi_got_data(applespi);
+	}
+
+	acpi_finish_gpe(NULL, applespi->gpe);
+}
+
+static u32 applespi_notify(acpi_handle gpe_device, u32 gpe, void *context)
+{
+	struct applespi_data *applespi = context;
+	int sts;
+	unsigned long flags;
+
+	trace_applespi_irq_received(ET_RD_IRQ, PT_READ);
+
+	spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
+
+	if (!applespi->suspended) {
+		sts = applespi_async(applespi, &applespi->rd_m,
+				     applespi_async_read_complete);
+		if (sts)
+			dev_warn(&applespi->spi->dev,
+				 "Error queueing async read to device: %d\n",
+				 sts);
+		else
+			applespi->read_active = true;
+	}
+
+	spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
+
+	return ACPI_INTERRUPT_HANDLED;
+}
+
+static int applespi_get_saved_bl_level(struct applespi_data *applespi)
+{
+	struct efivar_entry *efivar_entry;
+	u16 efi_data = 0;
+	unsigned long efi_data_len;
+	int sts;
+
+	efivar_entry = kmalloc(sizeof(*efivar_entry), GFP_KERNEL);
+	if (!efivar_entry)
+		return -ENOMEM;
+
+	memcpy(efivar_entry->var.VariableName, EFI_BL_LEVEL_NAME,
+	       sizeof(EFI_BL_LEVEL_NAME));
+	efivar_entry->var.VendorGuid = EFI_BL_LEVEL_GUID;
+	efi_data_len = sizeof(efi_data);
+
+	sts = efivar_entry_get(efivar_entry, NULL, &efi_data_len, &efi_data);
+	if (sts && sts != -ENOENT)
+		dev_warn(&applespi->spi->dev,
+			 "Error getting backlight level from EFI vars: %d\n",
+			 sts);
+
+	kfree(efivar_entry);
+
+	return sts ? sts : efi_data;
+}
+
+static void applespi_save_bl_level(struct applespi_data *applespi,
+				   unsigned int level)
+{
+	efi_guid_t efi_guid;
+	u32 efi_attr;
+	unsigned long efi_data_len;
+	u16 efi_data;
+	int sts;
+
+	/* Save keyboard backlight level */
+	efi_guid = EFI_BL_LEVEL_GUID;
+	efi_data = (u16)level;
+	efi_data_len = sizeof(efi_data);
+	efi_attr = EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS |
+		   EFI_VARIABLE_RUNTIME_ACCESS;
+
+	sts = efivar_entry_set_safe((efi_char16_t *)EFI_BL_LEVEL_NAME, efi_guid,
+				    efi_attr, true, efi_data_len, &efi_data);
+	if (sts)
+		dev_warn(&applespi->spi->dev,
+			 "Error saving backlight level to EFI vars: %d\n", sts);
+}
+
+static int applespi_probe(struct spi_device *spi)
+{
+	struct applespi_data *applespi;
+	acpi_handle spi_handle = ACPI_HANDLE(&spi->dev);
+	acpi_status acpi_sts;
+	int sts, i;
+	unsigned long long gpe, usb_status;
+
+	/* check if the USB interface is present and enabled already */
+	acpi_sts = acpi_evaluate_integer(spi_handle, "UIST", NULL, &usb_status);
+	if (ACPI_SUCCESS(acpi_sts) && usb_status) {
+		/* let the USB driver take over instead */
+		dev_info(&spi->dev, "USB interface already enabled\n");
+		return -ENODEV;
+	}
+
+	/* allocate driver data */
+	applespi = devm_kzalloc(&spi->dev, sizeof(*applespi), GFP_KERNEL);
+	if (!applespi)
+		return -ENOMEM;
+
+	applespi->spi = spi;
+
+	INIT_WORK(&applespi->work, applespi_worker);
+
+	/* store the driver data */
+	spi_set_drvdata(spi, applespi);
+
+	/* create our buffers */
+	applespi->tx_buffer = devm_kmalloc(&spi->dev, APPLESPI_PACKET_SIZE,
+					   GFP_KERNEL);
+	applespi->tx_status = devm_kmalloc(&spi->dev, APPLESPI_STATUS_SIZE,
+					   GFP_KERNEL);
+	applespi->rx_buffer = devm_kmalloc(&spi->dev, APPLESPI_PACKET_SIZE,
+					   GFP_KERNEL);
+	applespi->msg_buf = devm_kmalloc_array(&spi->dev, MAX_PKTS_PER_MSG,
+					       APPLESPI_PACKET_SIZE,
+					       GFP_KERNEL);
+
+	if (!applespi->tx_buffer || !applespi->tx_status ||
+	    !applespi->rx_buffer || !applespi->msg_buf)
+		return -ENOMEM;
+
+	/* set up our spi messages */
+	applespi_setup_read_txfrs(applespi);
+	applespi_setup_write_txfrs(applespi);
+
+	/* cache ACPI method handles */
+	acpi_sts = acpi_get_handle(spi_handle, "SIEN", &applespi->sien);
+	if (ACPI_FAILURE(acpi_sts)) {
+		dev_err(&applespi->spi->dev,
+			"Failed to get SIEN ACPI method handle: %s\n",
+			acpi_format_exception(acpi_sts));
+		return -ENODEV;
+	}
+
+	acpi_sts = acpi_get_handle(spi_handle, "SIST", &applespi->sist);
+	if (ACPI_FAILURE(acpi_sts)) {
+		dev_err(&applespi->spi->dev,
+			"Failed to get SIST ACPI method handle: %s\n",
+			acpi_format_exception(acpi_sts));
+		return -ENODEV;
+	}
+
+	/* switch on the SPI interface */
+	sts = applespi_setup_spi(applespi);
+	if (sts)
+		return sts;
+
+	sts = applespi_enable_spi(applespi);
+	if (sts)
+		return sts;
+
+	/* setup the keyboard input dev */
+	applespi->keyboard_input_dev = devm_input_allocate_device(&spi->dev);
+
+	if (!applespi->keyboard_input_dev)
+		return -ENOMEM;
+
+	applespi->keyboard_input_dev->name = "Apple SPI Keyboard";
+	applespi->keyboard_input_dev->phys = "applespi/input0";
+	applespi->keyboard_input_dev->dev.parent = &spi->dev;
+	applespi->keyboard_input_dev->id.bustype = BUS_SPI;
+
+	applespi->keyboard_input_dev->evbit[0] =
+			BIT_MASK(EV_KEY) | BIT_MASK(EV_LED) | BIT_MASK(EV_REP);
+	applespi->keyboard_input_dev->ledbit[0] = BIT_MASK(LED_CAPSL);
+
+	input_set_drvdata(applespi->keyboard_input_dev, applespi);
+	applespi->keyboard_input_dev->event = applespi_event;
+
+	for (i = 0; i < ARRAY_SIZE(applespi_scancodes); i++)
+		if (applespi_scancodes[i])
+			input_set_capability(applespi->keyboard_input_dev,
+					     EV_KEY, applespi_scancodes[i]);
+
+	for (i = 0; i < ARRAY_SIZE(applespi_controlcodes); i++)
+		if (applespi_controlcodes[i])
+			input_set_capability(applespi->keyboard_input_dev,
+					     EV_KEY, applespi_controlcodes[i]);
+
+	for (i = 0; i < ARRAY_SIZE(applespi_fn_codes); i++)
+		if (applespi_fn_codes[i].to)
+			input_set_capability(applespi->keyboard_input_dev,
+					     EV_KEY, applespi_fn_codes[i].to);
+
+	input_set_capability(applespi->keyboard_input_dev, EV_KEY, KEY_FN);
+
+	sts = input_register_device(applespi->keyboard_input_dev);
+	if (sts) {
+		dev_err(&applespi->spi->dev,
+			"Unable to register keyboard input device (%d)\n", sts);
+		return -ENODEV;
+	}
+
+	/*
+	 * The applespi device doesn't send interrupts normally (as is described
+	 * in its DSDT), but rather seems to use ACPI GPEs.
+	 */
+	acpi_sts = acpi_evaluate_integer(spi_handle, "_GPE", NULL, &gpe);
+	if (ACPI_FAILURE(acpi_sts)) {
+		dev_err(&applespi->spi->dev,
+			"Failed to obtain GPE for SPI slave device: %s\n",
+			acpi_format_exception(acpi_sts));
+		return -ENODEV;
+	}
+	applespi->gpe = (int)gpe;
+
+	acpi_sts = acpi_install_gpe_handler(NULL, applespi->gpe,
+					    ACPI_GPE_LEVEL_TRIGGERED,
+					    applespi_notify, applespi);
+	if (ACPI_FAILURE(acpi_sts)) {
+		dev_err(&applespi->spi->dev,
+			"Failed to install GPE handler for GPE %d: %s\n",
+			applespi->gpe, acpi_format_exception(acpi_sts));
+		return -ENODEV;
+	}
+
+	applespi->suspended = false;
+
+	acpi_sts = acpi_enable_gpe(NULL, applespi->gpe);
+	if (ACPI_FAILURE(acpi_sts)) {
+		dev_err(&applespi->spi->dev,
+			"Failed to enable GPE handler for GPE %d: %s\n",
+			applespi->gpe, acpi_format_exception(acpi_sts));
+		acpi_remove_gpe_handler(NULL, applespi->gpe, applespi_notify);
+		return -ENODEV;
+	}
+
+	/* trigger touchpad setup */
+	applespi_init(applespi, false);
+
+	/*
+	 * By default this device is not enabled for wakeup; but USB keyboards
+	 * generally are, so the expectation is that by default the keyboard
+	 * will wake the system.
+	 */
+	device_wakeup_enable(&spi->dev);
+
+	/* set up keyboard-backlight */
+	sts = applespi_get_saved_bl_level(applespi);
+	if (sts >= 0)
+		applespi_set_bl_level(&applespi->backlight_info, sts);
+
+	applespi->backlight_info.name            = "spi::kbd_backlight";
+	applespi->backlight_info.default_trigger = "kbd-backlight";
+	applespi->backlight_info.brightness_set  = applespi_set_bl_level;
+
+	sts = devm_led_classdev_register(&spi->dev, &applespi->backlight_info);
+	if (sts)
+		dev_warn(&applespi->spi->dev,
+			 "Unable to register keyboard backlight class dev (%d)\n",
+			 sts);
+
+	/* set up debugfs entries for touchpad dimensions logging */
+	applespi->debugfs_root = debugfs_create_dir("applespi", NULL);
+
+	debugfs_create_bool("enable_tp_dim", 0600, applespi->debugfs_root,
+			    &applespi->debug_tp_dim);
+
+	debugfs_create_file("tp_dim", 0400, applespi->debugfs_root, applespi,
+			    &applespi_tp_dim_fops);
+
+	return 0;
+}
+
+static void applespi_drain_writes(struct applespi_data *applespi)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
+
+	applespi->drain = true;
+	wait_event_lock_irq(applespi->drain_complete, !applespi->write_active,
+			    applespi->cmd_msg_lock);
+
+	spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
+}
+
+static void applespi_drain_reads(struct applespi_data *applespi)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
+
+	wait_event_lock_irq(applespi->drain_complete, !applespi->read_active,
+			    applespi->cmd_msg_lock);
+
+	applespi->suspended = true;
+
+	spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
+}
+
+static int applespi_remove(struct spi_device *spi)
+{
+	struct applespi_data *applespi = spi_get_drvdata(spi);
+
+	applespi_drain_writes(applespi);
+
+	acpi_disable_gpe(NULL, applespi->gpe);
+	acpi_remove_gpe_handler(NULL, applespi->gpe, applespi_notify);
+	device_wakeup_disable(&spi->dev);
+
+	applespi_drain_reads(applespi);
+
+	debugfs_remove_recursive(applespi->debugfs_root);
+
+	return 0;
+}
+
+static void applespi_shutdown(struct spi_device *spi)
+{
+	struct applespi_data *applespi = spi_get_drvdata(spi);
+
+	applespi_save_bl_level(applespi, applespi->have_bl_level);
+}
+
+static int applespi_poweroff_late(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct applespi_data *applespi = spi_get_drvdata(spi);
+
+	applespi_save_bl_level(applespi, applespi->have_bl_level);
+
+	return 0;
+}
+
+static int __maybe_unused applespi_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct applespi_data *applespi = spi_get_drvdata(spi);
+	acpi_status acpi_sts;
+	int sts;
+
+	/* turn off caps-lock - it'll stay on otherwise */
+	sts = applespi_set_capsl_led(applespi, false);
+	if (sts)
+		dev_warn(&applespi->spi->dev,
+			 "Failed to turn off caps-lock led (%d)\n", sts);
+
+	applespi_drain_writes(applespi);
+
+	/* disable the interrupt */
+	acpi_sts = acpi_disable_gpe(NULL, applespi->gpe);
+	if (ACPI_FAILURE(acpi_sts))
+		dev_err(&applespi->spi->dev,
+			"Failed to disable GPE handler for GPE %d: %s\n",
+			applespi->gpe, acpi_format_exception(acpi_sts));
+
+	applespi_drain_reads(applespi);
+
+	return 0;
+}
+
+static int __maybe_unused applespi_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct applespi_data *applespi = spi_get_drvdata(spi);
+	acpi_status acpi_sts;
+	unsigned long flags;
+
+	/* ensure our flags and state reflect a newly resumed device */
+	spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
+
+	applespi->drain = false;
+	applespi->have_cl_led_on = false;
+	applespi->have_bl_level = 0;
+	applespi->cmd_msg_queued = 0;
+	applespi->read_active = false;
+	applespi->write_active = false;
+
+	applespi->suspended = false;
+
+	spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
+
+	/* switch on the SPI interface */
+	applespi_enable_spi(applespi);
+
+	/* re-enable the interrupt */
+	acpi_sts = acpi_enable_gpe(NULL, applespi->gpe);
+	if (ACPI_FAILURE(acpi_sts))
+		dev_err(&applespi->spi->dev,
+			"Failed to re-enable GPE handler for GPE %d: %s\n",
+			applespi->gpe, acpi_format_exception(acpi_sts));
+
+	/* switch the touchpad into multitouch mode */
+	applespi_init(applespi, true);
+
+	return 0;
+}
+
+static const struct acpi_device_id applespi_acpi_match[] = {
+	{ "APP000D", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, applespi_acpi_match);
+
+static const struct dev_pm_ops applespi_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(applespi_suspend, applespi_resume)
+	.poweroff_late	= applespi_poweroff_late,
+};
+
+static struct spi_driver applespi_driver = {
+	.driver		= {
+		.name			= "applespi",
+		.acpi_match_table	= applespi_acpi_match,
+		.pm			= &applespi_pm_ops,
+	},
+	.probe		= applespi_probe,
+	.remove		= applespi_remove,
+	.shutdown	= applespi_shutdown,
+};
+
+module_spi_driver(applespi_driver)
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MacBook(Pro) SPI Keyboard/Touchpad driver");
+MODULE_AUTHOR("Federico Lorenzi");
+MODULE_AUTHOR("Ronald Tschalär");
diff --git a/drivers/input/keyboard/applespi.h b/drivers/input/keyboard/applespi.h
new file mode 100644
index 000000000..7f5ab10c5
--- /dev/null
+++ b/drivers/input/keyboard/applespi.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MacBook (Pro) SPI keyboard and touchpad driver
+ *
+ * Copyright (c) 2015-2019 Federico Lorenzi
+ * Copyright (c) 2017-2019 Ronald Tschalär
+ */
+
+#ifndef _APPLESPI_H_
+#define _APPLESPI_H_
+
+enum applespi_evt_type {
+	ET_CMD_TP_INI = BIT(0),
+	ET_CMD_BL = BIT(1),
+	ET_CMD_CL = BIT(2),
+	ET_RD_KEYB = BIT(8),
+	ET_RD_TPAD = BIT(9),
+	ET_RD_UNKN = BIT(10),
+	ET_RD_IRQ = BIT(11),
+	ET_RD_CRC = BIT(12),
+};
+
+enum applespi_pkt_type {
+	PT_READ,
+	PT_WRITE,
+	PT_STATUS,
+};
+
+#endif /* _APPLESPI_H_ */
diff --git a/drivers/input/keyboard/applespi_trace.h b/drivers/input/keyboard/applespi_trace.h
new file mode 100644
index 000000000..0ad1a3d79
--- /dev/null
+++ b/drivers/input/keyboard/applespi_trace.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MacBook (Pro) SPI keyboard and touchpad driver
+ *
+ * Copyright (c) 2015-2019 Federico Lorenzi
+ * Copyright (c) 2017-2019 Ronald Tschalär
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM applespi
+
+#if !defined(_APPLESPI_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _APPLESPI_TRACE_H_
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#include "applespi.h"
+
+DECLARE_EVENT_CLASS(dump_message_template,
+	TP_PROTO(enum applespi_evt_type evt_type,
+		 enum applespi_pkt_type pkt_type,
+		 u8 *buf,
+		 size_t len),
+
+	TP_ARGS(evt_type, pkt_type, buf, len),
+
+	TP_STRUCT__entry(
+		__field(enum applespi_evt_type, evt_type)
+		__field(enum applespi_pkt_type, pkt_type)
+		__field(size_t, len)
+		__dynamic_array(u8, buf, len)
+	),
+
+	TP_fast_assign(
+		__entry->evt_type = evt_type;
+		__entry->pkt_type = pkt_type;
+		__entry->len = len;
+		memcpy(__get_dynamic_array(buf), buf, len);
+	),
+
+	TP_printk("%-6s: %s",
+		  __print_symbolic(__entry->pkt_type,
+				   { PT_READ, "read" },
+				   { PT_WRITE, "write" },
+				   { PT_STATUS, "status" }
+		  ),
+		  __print_hex(__get_dynamic_array(buf), __entry->len))
+);
+
+#define DEFINE_DUMP_MESSAGE_EVENT(name)			\
+DEFINE_EVENT(dump_message_template, name,		\
+	TP_PROTO(enum applespi_evt_type evt_type,	\
+		 enum applespi_pkt_type pkt_type,	\
+		 u8 *buf,				\
+		 size_t len),				\
+	TP_ARGS(evt_type, pkt_type, buf, len)		\
+)
+
+DEFINE_DUMP_MESSAGE_EVENT(applespi_tp_ini_cmd);
+DEFINE_DUMP_MESSAGE_EVENT(applespi_backlight_cmd);
+DEFINE_DUMP_MESSAGE_EVENT(applespi_caps_lock_cmd);
+DEFINE_DUMP_MESSAGE_EVENT(applespi_keyboard_data);
+DEFINE_DUMP_MESSAGE_EVENT(applespi_touchpad_data);
+DEFINE_DUMP_MESSAGE_EVENT(applespi_unknown_data);
+DEFINE_DUMP_MESSAGE_EVENT(applespi_bad_crc);
+
+TRACE_EVENT(applespi_irq_received,
+	TP_PROTO(enum applespi_evt_type evt_type,
+		 enum applespi_pkt_type pkt_type),
+
+	TP_ARGS(evt_type, pkt_type),
+
+	TP_STRUCT__entry(
+		__field(enum applespi_evt_type, evt_type)
+		__field(enum applespi_pkt_type, pkt_type)
+	),
+
+	TP_fast_assign(
+		__entry->evt_type = evt_type;
+		__entry->pkt_type = pkt_type;
+	),
+
+	"\n"
+);
+
+#endif /* _APPLESPI_TRACE_H_ */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH ../../drivers/input/keyboard
+#define TRACE_INCLUDE_FILE applespi_trace
+#include <trace/define_trace.h>
diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c
new file mode 100644
index 000000000..77ed54630
--- /dev/null
+++ b/drivers/input/keyboard/atakbd.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  atakbd.c
+ *
+ *  Copyright (c) 2005 Michael Schmitz
+ *
+ * Based on amikbd.c, which is
+ *
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *	Hamish Macdonald
+ */
+
+/*
+ * Atari keyboard driver for Linux/m68k
+ *
+ * The low level init and interrupt stuff is handled in arch/mm68k/atari/atakeyb.c
+ * (the keyboard ACIA also handles the mouse and joystick data, and the keyboard
+ * interrupt is shared with the MIDI ACIA so MIDI data also get handled there).
+ * This driver only deals with handing key events off to the input layer.
+ */
+
+/*
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/atariints.h>
+#include <asm/atarihw.h>
+#include <asm/atarikb.h>
+#include <asm/irq.h>
+
+MODULE_AUTHOR("Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>");
+MODULE_DESCRIPTION("Atari keyboard driver");
+MODULE_LICENSE("GPL");
+
+/*
+ 0x47: KP_7     71
+ 0x48: KP_8     72
+ 0x49: KP_9     73
+ 0x62: KP_/     98
+ 0x4b: KP_4     75
+ 0x4c: KP_5     76
+ 0x4d: KP_6     77
+ 0x37: KP_*     55
+ 0x4f: KP_1     79
+ 0x50: KP_2     80
+ 0x51: KP_3     81
+ 0x4a: KP_-     74
+ 0x52: KP_0     82
+ 0x53: KP_.     83
+ 0x4e: KP_+     78
+
+ 0x67: Up       103
+ 0x6c: Down     108
+ 0x69: Left     105
+ 0x6a: Right    106
+ */
+
+
+static unsigned char atakbd_keycode[0x73] = {	/* American layout */
+	[1]	 = KEY_ESC,
+	[2]	 = KEY_1,
+	[3]	 = KEY_2,
+	[4]	 = KEY_3,
+	[5]	 = KEY_4,
+	[6]	 = KEY_5,
+	[7]	 = KEY_6,
+	[8]	 = KEY_7,
+	[9]	 = KEY_8,
+	[10]	 = KEY_9,
+	[11]	 = KEY_0,
+	[12]	 = KEY_MINUS,
+	[13]	 = KEY_EQUAL,
+	[14]	 = KEY_BACKSPACE,
+	[15]	 = KEY_TAB,
+	[16]	 = KEY_Q,
+	[17]	 = KEY_W,
+	[18]	 = KEY_E,
+	[19]	 = KEY_R,
+	[20]	 = KEY_T,
+	[21]	 = KEY_Y,
+	[22]	 = KEY_U,
+	[23]	 = KEY_I,
+	[24]	 = KEY_O,
+	[25]	 = KEY_P,
+	[26]	 = KEY_LEFTBRACE,
+	[27]	 = KEY_RIGHTBRACE,
+	[28]	 = KEY_ENTER,
+	[29]	 = KEY_LEFTCTRL,
+	[30]	 = KEY_A,
+	[31]	 = KEY_S,
+	[32]	 = KEY_D,
+	[33]	 = KEY_F,
+	[34]	 = KEY_G,
+	[35]	 = KEY_H,
+	[36]	 = KEY_J,
+	[37]	 = KEY_K,
+	[38]	 = KEY_L,
+	[39]	 = KEY_SEMICOLON,
+	[40]	 = KEY_APOSTROPHE,
+	[41]	 = KEY_GRAVE,
+	[42]	 = KEY_LEFTSHIFT,
+	[43]	 = KEY_BACKSLASH,
+	[44]	 = KEY_Z,
+	[45]	 = KEY_X,
+	[46]	 = KEY_C,
+	[47]	 = KEY_V,
+	[48]	 = KEY_B,
+	[49]	 = KEY_N,
+	[50]	 = KEY_M,
+	[51]	 = KEY_COMMA,
+	[52]	 = KEY_DOT,
+	[53]	 = KEY_SLASH,
+	[54]	 = KEY_RIGHTSHIFT,
+	[55]	 = KEY_KPASTERISK,
+	[56]	 = KEY_LEFTALT,
+	[57]	 = KEY_SPACE,
+	[58]	 = KEY_CAPSLOCK,
+	[59]	 = KEY_F1,
+	[60]	 = KEY_F2,
+	[61]	 = KEY_F3,
+	[62]	 = KEY_F4,
+	[63]	 = KEY_F5,
+	[64]	 = KEY_F6,
+	[65]	 = KEY_F7,
+	[66]	 = KEY_F8,
+	[67]	 = KEY_F9,
+	[68]	 = KEY_F10,
+	[71]	 = KEY_HOME,
+	[72]	 = KEY_UP,
+	[74]	 = KEY_KPMINUS,
+	[75]	 = KEY_LEFT,
+	[77]	 = KEY_RIGHT,
+	[78]	 = KEY_KPPLUS,
+	[80]	 = KEY_DOWN,
+	[82]	 = KEY_INSERT,
+	[83]	 = KEY_DELETE,
+	[96]	 = KEY_102ND,
+	[97]	 = KEY_UNDO,
+	[98]	 = KEY_HELP,
+	[99]	 = KEY_KPLEFTPAREN,
+	[100]	 = KEY_KPRIGHTPAREN,
+	[101]	 = KEY_KPSLASH,
+	[102]	 = KEY_KPASTERISK,
+	[103]	 = KEY_KP7,
+	[104]	 = KEY_KP8,
+	[105]	 = KEY_KP9,
+	[106]	 = KEY_KP4,
+	[107]	 = KEY_KP5,
+	[108]	 = KEY_KP6,
+	[109]	 = KEY_KP1,
+	[110]	 = KEY_KP2,
+	[111]	 = KEY_KP3,
+	[112]	 = KEY_KP0,
+	[113]	 = KEY_KPDOT,
+	[114]	 = KEY_KPENTER,
+};
+
+static struct input_dev *atakbd_dev;
+
+static void atakbd_interrupt(unsigned char scancode, char down)
+{
+
+	if (scancode < 0x73) {		/* scancodes < 0xf3 are keys */
+
+		// report raw events here?
+
+		scancode = atakbd_keycode[scancode];
+
+		input_report_key(atakbd_dev, scancode, down);
+		input_sync(atakbd_dev);
+	} else				/* scancodes >= 0xf3 are mouse data, most likely */
+		printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode);
+
+	return;
+}
+
+static int __init atakbd_init(void)
+{
+	int i, error;
+
+	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP))
+		return -ENODEV;
+
+	// need to init core driver if not already done so
+	error = atari_keyb_init();
+	if (error)
+		return error;
+
+	atakbd_dev = input_allocate_device();
+	if (!atakbd_dev)
+		return -ENOMEM;
+
+	atakbd_dev->name = "Atari Keyboard";
+	atakbd_dev->phys = "atakbd/input0";
+	atakbd_dev->id.bustype = BUS_HOST;
+	atakbd_dev->id.vendor = 0x0001;
+	atakbd_dev->id.product = 0x0001;
+	atakbd_dev->id.version = 0x0100;
+
+	atakbd_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	atakbd_dev->keycode = atakbd_keycode;
+	atakbd_dev->keycodesize = sizeof(unsigned char);
+	atakbd_dev->keycodemax = ARRAY_SIZE(atakbd_keycode);
+
+	for (i = 1; i < 0x72; i++) {
+		set_bit(atakbd_keycode[i], atakbd_dev->keybit);
+	}
+
+	/* error check */
+	error = input_register_device(atakbd_dev);
+	if (error) {
+		input_free_device(atakbd_dev);
+		return error;
+	}
+
+	atari_input_keyboard_interrupt_hook = atakbd_interrupt;
+
+	return 0;
+}
+
+static void __exit atakbd_exit(void)
+{
+	atari_input_keyboard_interrupt_hook = NULL;
+	input_unregister_device(atakbd_dev);
+}
+
+module_init(atakbd_init);
+module_exit(atakbd_exit);
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
new file mode 100644
index 000000000..4912582c5
--- /dev/null
+++ b/drivers/input/keyboard/atkbd.c
@@ -0,0 +1,1954 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AT and PS/2 keyboard driver
+ *
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ */
+
+
+/*
+ * This driver can handle standard AT keyboards and PS/2 keyboards in
+ * Translated and Raw Set 2 and Set 3, as well as AT keyboards on dumb
+ * input-only controllers and AT keyboards connected over a one way RS232
+ * converter.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/workqueue.h>
+#include <linux/libps2.h>
+#include <linux/mutex.h>
+#include <linux/dmi.h>
+#include <linux/property.h>
+
+#define DRIVER_DESC	"AT and PS/2 keyboard driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static int atkbd_set = 2;
+module_param_named(set, atkbd_set, int, 0);
+MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)");
+
+#if defined(__i386__) || defined(__x86_64__) || defined(__hppa__)
+static bool atkbd_reset;
+#else
+static bool atkbd_reset = true;
+#endif
+module_param_named(reset, atkbd_reset, bool, 0);
+MODULE_PARM_DESC(reset, "Reset keyboard during initialization");
+
+static bool atkbd_softrepeat;
+module_param_named(softrepeat, atkbd_softrepeat, bool, 0);
+MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat");
+
+static bool atkbd_softraw = true;
+module_param_named(softraw, atkbd_softraw, bool, 0);
+MODULE_PARM_DESC(softraw, "Use software generated rawmode");
+
+static bool atkbd_scroll;
+module_param_named(scroll, atkbd_scroll, bool, 0);
+MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
+
+static bool atkbd_extra;
+module_param_named(extra, atkbd_extra, bool, 0);
+MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
+
+static bool atkbd_terminal;
+module_param_named(terminal, atkbd_terminal, bool, 0);
+MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2");
+
+#define MAX_FUNCTION_ROW_KEYS	24
+
+#define SCANCODE(keymap)	((keymap >> 16) & 0xFFFF)
+#define KEYCODE(keymap)		(keymap & 0xFFFF)
+
+/*
+ * Scancode to keycode tables. These are just the default setting, and
+ * are loadable via a userland utility.
+ */
+
+#define ATKBD_KEYMAP_SIZE	512
+
+static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = {
+
+#ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
+
+/* XXX: need a more general approach */
+
+#include "hpps2atkbd.h"	/* include the keyboard scancodes */
+
+#else
+	  0, 67, 65, 63, 61, 59, 60, 88,  0, 68, 66, 64, 62, 15, 41,117,
+	  0, 56, 42, 93, 29, 16,  2,  0,  0,  0, 44, 31, 30, 17,  3,  0,
+	  0, 46, 45, 32, 18,  5,  4, 95,  0, 57, 47, 33, 20, 19,  6,183,
+	  0, 49, 48, 35, 34, 21,  7,184,  0,  0, 50, 36, 22,  8,  9,185,
+	  0, 51, 37, 23, 24, 11, 10,  0,  0, 52, 53, 38, 39, 25, 12,  0,
+	  0, 89, 40,  0, 26, 13,  0,  0, 58, 54, 28, 27,  0, 43,  0, 85,
+	  0, 86, 91, 90, 92,  0, 14, 94,  0, 79,124, 75, 71,121,  0,  0,
+	 82, 83, 80, 76, 77, 72,  1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
+
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	217,100,255,  0, 97,165,  0,  0,156,  0,  0,  0,  0,  0,  0,125,
+	173,114,  0,113,  0,  0,  0,126,128,  0,  0,140,  0,  0,  0,127,
+	159,  0,115,  0,164,  0,  0,116,158,  0,172,166,  0,  0,  0,142,
+	157,  0,  0,  0,  0,  0,  0,  0,155,  0, 98,  0,  0,163,  0,  0,
+	226,  0,  0,  0,  0,  0,  0,  0,  0,255, 96,  0,  0,  0,143,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,107,  0,105,102,  0,  0,112,
+	110,111,108,112,106,103,  0,119,  0,118,109,  0, 99,104,119,  0,
+
+	  0,  0,  0, 65, 99,
+#endif
+};
+
+static const unsigned short atkbd_set3_keycode[ATKBD_KEYMAP_SIZE] = {
+
+	  0,  0,  0,  0,  0,  0,  0, 59,  1,138,128,129,130, 15, 41, 60,
+	131, 29, 42, 86, 58, 16,  2, 61,133, 56, 44, 31, 30, 17,  3, 62,
+	134, 46, 45, 32, 18,  5,  4, 63,135, 57, 47, 33, 20, 19,  6, 64,
+	136, 49, 48, 35, 34, 21,  7, 65,137,100, 50, 36, 22,  8,  9, 66,
+	125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68,
+	113,114, 40, 43, 26, 13, 87, 99, 97, 54, 28, 27, 43, 43, 88, 70,
+	108,105,119,103,111,107, 14,110,  0, 79,106, 75, 71,109,102,104,
+	 82, 83, 80, 76, 77, 72, 69, 98,  0, 96, 81,  0, 78, 73, 55,183,
+
+	184,185,186,187, 74, 94, 92, 93,  0,  0,  0,125,126,127,112,  0,
+	  0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168,
+	148,149,147,140
+};
+
+static const unsigned short atkbd_unxlate_table[128] = {
+          0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
+         21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
+         35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
+         50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88,  5,  6,  4, 12,  3,
+         11,  2, 10,  1,  9,119,126,108,117,125,123,107,115,116,121,105,
+        114,122,112,113,127, 96, 97,120,  7, 15, 23, 31, 39, 47, 55, 63,
+         71, 79, 86, 94,  8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111,
+         19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110
+};
+
+#define ATKBD_CMD_SETLEDS	0x10ed
+#define ATKBD_CMD_GSCANSET	0x11f0
+#define ATKBD_CMD_SSCANSET	0x10f0
+#define ATKBD_CMD_GETID		0x02f2
+#define ATKBD_CMD_SETREP	0x10f3
+#define ATKBD_CMD_ENABLE	0x00f4
+#define ATKBD_CMD_RESET_DIS	0x00f5	/* Reset to defaults and disable */
+#define ATKBD_CMD_RESET_DEF	0x00f6	/* Reset to defaults */
+#define ATKBD_CMD_SETALL_MB	0x00f8	/* Set all keys to give break codes */
+#define ATKBD_CMD_SETALL_MBR	0x00fa  /* ... and repeat */
+#define ATKBD_CMD_RESET_BAT	0x02ff
+#define ATKBD_CMD_RESEND	0x00fe
+#define ATKBD_CMD_EX_ENABLE	0x10ea
+#define ATKBD_CMD_EX_SETLEDS	0x20eb
+#define ATKBD_CMD_OK_GETID	0x02e8
+
+#define ATKBD_RET_ACK		0xfa
+#define ATKBD_RET_NAK		0xfe
+#define ATKBD_RET_BAT		0xaa
+#define ATKBD_RET_EMUL0		0xe0
+#define ATKBD_RET_EMUL1		0xe1
+#define ATKBD_RET_RELEASE	0xf0
+#define ATKBD_RET_HANJA		0xf1
+#define ATKBD_RET_HANGEUL	0xf2
+#define ATKBD_RET_ERR		0xff
+
+#define ATKBD_KEY_UNKNOWN	0
+#define ATKBD_KEY_NULL		255
+
+#define ATKBD_SCR_1		0xfffe
+#define ATKBD_SCR_2		0xfffd
+#define ATKBD_SCR_4		0xfffc
+#define ATKBD_SCR_8		0xfffb
+#define ATKBD_SCR_CLICK		0xfffa
+#define ATKBD_SCR_LEFT		0xfff9
+#define ATKBD_SCR_RIGHT		0xfff8
+
+#define ATKBD_SPECIAL		ATKBD_SCR_RIGHT
+
+#define ATKBD_LED_EVENT_BIT	0
+#define ATKBD_REP_EVENT_BIT	1
+
+#define ATKBD_XL_ERR		0x01
+#define ATKBD_XL_BAT		0x02
+#define ATKBD_XL_ACK		0x04
+#define ATKBD_XL_NAK		0x08
+#define ATKBD_XL_HANGEUL	0x10
+#define ATKBD_XL_HANJA		0x20
+
+static const struct {
+	unsigned short keycode;
+	unsigned char set2;
+} atkbd_scroll_keys[] = {
+	{ ATKBD_SCR_1,     0xc5 },
+	{ ATKBD_SCR_2,     0x9d },
+	{ ATKBD_SCR_4,     0xa4 },
+	{ ATKBD_SCR_8,     0x9b },
+	{ ATKBD_SCR_CLICK, 0xe0 },
+	{ ATKBD_SCR_LEFT,  0xcb },
+	{ ATKBD_SCR_RIGHT, 0xd2 },
+};
+
+/*
+ * The atkbd control structure
+ */
+
+struct atkbd {
+
+	struct ps2dev ps2dev;
+	struct input_dev *dev;
+
+	/* Written only during init */
+	char name[64];
+	char phys[32];
+
+	unsigned short id;
+	unsigned short keycode[ATKBD_KEYMAP_SIZE];
+	DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE);
+	unsigned char set;
+	bool translated;
+	bool extra;
+	bool write;
+	bool softrepeat;
+	bool softraw;
+	bool scroll;
+	bool enabled;
+
+	/* Accessed only from interrupt */
+	unsigned char emul;
+	bool resend;
+	bool release;
+	unsigned long xl_bit;
+	unsigned int last;
+	unsigned long time;
+	unsigned long err_count;
+
+	struct delayed_work event_work;
+	unsigned long event_jiffies;
+	unsigned long event_mask;
+
+	/* Serializes reconnect(), attr->set() and event work */
+	struct mutex mutex;
+
+	u32 function_row_physmap[MAX_FUNCTION_ROW_KEYS];
+	int num_function_row_keys;
+};
+
+/*
+ * System-specific keymap fixup routine
+ */
+static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
+static void *atkbd_platform_fixup_data;
+static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int);
+
+/*
+ * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding
+ * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed.
+ */
+static bool atkbd_skip_deactivate;
+
+static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
+				ssize_t (*handler)(struct atkbd *, char *));
+static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
+				ssize_t (*handler)(struct atkbd *, const char *, size_t));
+#define ATKBD_DEFINE_ATTR(_name)						\
+static ssize_t atkbd_show_##_name(struct atkbd *, char *);			\
+static ssize_t atkbd_set_##_name(struct atkbd *, const char *, size_t);		\
+static ssize_t atkbd_do_show_##_name(struct device *d,				\
+				struct device_attribute *attr, char *b)		\
+{										\
+	return atkbd_attr_show_helper(d, b, atkbd_show_##_name);		\
+}										\
+static ssize_t atkbd_do_set_##_name(struct device *d,				\
+			struct device_attribute *attr, const char *b, size_t s)	\
+{										\
+	return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name);		\
+}										\
+static struct device_attribute atkbd_attr_##_name =				\
+	__ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name);
+
+ATKBD_DEFINE_ATTR(extra);
+ATKBD_DEFINE_ATTR(force_release);
+ATKBD_DEFINE_ATTR(scroll);
+ATKBD_DEFINE_ATTR(set);
+ATKBD_DEFINE_ATTR(softrepeat);
+ATKBD_DEFINE_ATTR(softraw);
+
+#define ATKBD_DEFINE_RO_ATTR(_name)						\
+static ssize_t atkbd_show_##_name(struct atkbd *, char *);			\
+static ssize_t atkbd_do_show_##_name(struct device *d,				\
+				struct device_attribute *attr, char *b)		\
+{										\
+	return atkbd_attr_show_helper(d, b, atkbd_show_##_name);		\
+}										\
+static struct device_attribute atkbd_attr_##_name =				\
+	__ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL);
+
+ATKBD_DEFINE_RO_ATTR(err_count);
+ATKBD_DEFINE_RO_ATTR(function_row_physmap);
+
+static struct attribute *atkbd_attributes[] = {
+	&atkbd_attr_extra.attr,
+	&atkbd_attr_force_release.attr,
+	&atkbd_attr_scroll.attr,
+	&atkbd_attr_set.attr,
+	&atkbd_attr_softrepeat.attr,
+	&atkbd_attr_softraw.attr,
+	&atkbd_attr_err_count.attr,
+	&atkbd_attr_function_row_physmap.attr,
+	NULL
+};
+
+static ssize_t atkbd_show_function_row_physmap(struct atkbd *atkbd, char *buf)
+{
+	ssize_t size = 0;
+	int i;
+
+	if (!atkbd->num_function_row_keys)
+		return 0;
+
+	for (i = 0; i < atkbd->num_function_row_keys; i++)
+		size += scnprintf(buf + size, PAGE_SIZE - size, "%02X ",
+				  atkbd->function_row_physmap[i]);
+	size += scnprintf(buf + size, PAGE_SIZE - size, "\n");
+	return size;
+}
+
+static umode_t atkbd_attr_is_visible(struct kobject *kobj,
+				struct attribute *attr, int i)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct serio *serio = to_serio_port(dev);
+	struct atkbd *atkbd = serio_get_drvdata(serio);
+
+	if (attr == &atkbd_attr_function_row_physmap.attr &&
+	    !atkbd->num_function_row_keys)
+		return 0;
+
+	return attr->mode;
+}
+
+static struct attribute_group atkbd_attribute_group = {
+	.attrs	= atkbd_attributes,
+	.is_visible = atkbd_attr_is_visible,
+};
+
+static const unsigned int xl_table[] = {
+	ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK,
+	ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL,
+};
+
+/*
+ * Checks if we should mangle the scancode to extract 'release' bit
+ * in translated mode.
+ */
+static bool atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
+{
+	int i;
+
+	if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1)
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(xl_table); i++)
+		if (code == xl_table[i])
+			return test_bit(i, &xl_bit);
+
+	return true;
+}
+
+/*
+ * Calculates new value of xl_bit so the driver can distinguish
+ * between make/break pair of scancodes for select keys and PS/2
+ * protocol responses.
+ */
+static void atkbd_calculate_xl_bit(struct atkbd *atkbd, unsigned char code)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(xl_table); i++) {
+		if (!((code ^ xl_table[i]) & 0x7f)) {
+			if (code & 0x80)
+				__clear_bit(i, &atkbd->xl_bit);
+			else
+				__set_bit(i, &atkbd->xl_bit);
+			break;
+		}
+	}
+}
+
+/*
+ * Encode the scancode, 0xe0 prefix, and high bit into a single integer,
+ * keeping kernel 2.4 compatibility for set 2
+ */
+static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code)
+{
+	if (atkbd->set == 3) {
+		if (atkbd->emul == 1)
+			code |= 0x100;
+        } else {
+		code = (code & 0x7f) | ((code & 0x80) << 1);
+		if (atkbd->emul == 1)
+			code |= 0x80;
+	}
+
+	return code;
+}
+
+/*
+ * atkbd_interrupt(). Here takes place processing of data received from
+ * the keyboard into events.
+ */
+
+static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
+				   unsigned int flags)
+{
+	struct atkbd *atkbd = serio_get_drvdata(serio);
+	struct input_dev *dev = atkbd->dev;
+	unsigned int code = data;
+	int scroll = 0, hscroll = 0, click = -1;
+	int value;
+	unsigned short keycode;
+
+	dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags);
+
+#if !defined(__i386__) && !defined (__x86_64__)
+	if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) {
+		dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags);
+		serio_write(serio, ATKBD_CMD_RESEND);
+		atkbd->resend = true;
+		goto out;
+	}
+
+	if (!flags && data == ATKBD_RET_ACK)
+		atkbd->resend = false;
+#endif
+
+	if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK))
+		if  (ps2_handle_ack(&atkbd->ps2dev, data))
+			goto out;
+
+	if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_CMD))
+		if  (ps2_handle_response(&atkbd->ps2dev, data))
+			goto out;
+
+	pm_wakeup_event(&serio->dev, 0);
+
+	if (!atkbd->enabled)
+		goto out;
+
+	input_event(dev, EV_MSC, MSC_RAW, code);
+
+	if (atkbd_platform_scancode_fixup)
+		code = atkbd_platform_scancode_fixup(atkbd, code);
+
+	if (atkbd->translated) {
+
+		if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) {
+			atkbd->release = code >> 7;
+			code &= 0x7f;
+		}
+
+		if (!atkbd->emul)
+			atkbd_calculate_xl_bit(atkbd, data);
+	}
+
+	switch (code) {
+	case ATKBD_RET_BAT:
+		atkbd->enabled = false;
+		serio_reconnect(atkbd->ps2dev.serio);
+		goto out;
+	case ATKBD_RET_EMUL0:
+		atkbd->emul = 1;
+		goto out;
+	case ATKBD_RET_EMUL1:
+		atkbd->emul = 2;
+		goto out;
+	case ATKBD_RET_RELEASE:
+		atkbd->release = true;
+		goto out;
+	case ATKBD_RET_ACK:
+	case ATKBD_RET_NAK:
+		if (printk_ratelimit())
+			dev_warn(&serio->dev,
+				 "Spurious %s on %s. "
+				 "Some program might be trying to access hardware directly.\n",
+				 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
+		goto out;
+	case ATKBD_RET_ERR:
+		atkbd->err_count++;
+		dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n",
+			serio->phys);
+		goto out;
+	}
+
+	code = atkbd_compat_scancode(atkbd, code);
+
+	if (atkbd->emul && --atkbd->emul)
+		goto out;
+
+	keycode = atkbd->keycode[code];
+
+	if (!(atkbd->release && test_bit(code, atkbd->force_release_mask)))
+		if (keycode != ATKBD_KEY_NULL)
+			input_event(dev, EV_MSC, MSC_SCAN, code);
+
+	switch (keycode) {
+	case ATKBD_KEY_NULL:
+		break;
+	case ATKBD_KEY_UNKNOWN:
+		dev_warn(&serio->dev,
+			 "Unknown key %s (%s set %d, code %#x on %s).\n",
+			 atkbd->release ? "released" : "pressed",
+			 atkbd->translated ? "translated" : "raw",
+			 atkbd->set, code, serio->phys);
+		dev_warn(&serio->dev,
+			 "Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
+			 code & 0x80 ? "e0" : "", code & 0x7f);
+		input_sync(dev);
+		break;
+	case ATKBD_SCR_1:
+		scroll = 1;
+		break;
+	case ATKBD_SCR_2:
+		scroll = 2;
+		break;
+	case ATKBD_SCR_4:
+		scroll = 4;
+		break;
+	case ATKBD_SCR_8:
+		scroll = 8;
+		break;
+	case ATKBD_SCR_CLICK:
+		click = !atkbd->release;
+		break;
+	case ATKBD_SCR_LEFT:
+		hscroll = -1;
+		break;
+	case ATKBD_SCR_RIGHT:
+		hscroll = 1;
+		break;
+	default:
+		if (atkbd->release) {
+			value = 0;
+			atkbd->last = 0;
+		} else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
+			/* Workaround Toshiba laptop multiple keypress */
+			value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
+		} else {
+			value = 1;
+			atkbd->last = code;
+			atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
+		}
+
+		input_event(dev, EV_KEY, keycode, value);
+		input_sync(dev);
+
+		if (value && test_bit(code, atkbd->force_release_mask)) {
+			input_event(dev, EV_MSC, MSC_SCAN, code);
+			input_report_key(dev, keycode, 0);
+			input_sync(dev);
+		}
+	}
+
+	if (atkbd->scroll) {
+		if (click != -1)
+			input_report_key(dev, BTN_MIDDLE, click);
+		input_report_rel(dev, REL_WHEEL,
+				 atkbd->release ? -scroll : scroll);
+		input_report_rel(dev, REL_HWHEEL, hscroll);
+		input_sync(dev);
+	}
+
+	atkbd->release = false;
+out:
+	return IRQ_HANDLED;
+}
+
+static int atkbd_set_repeat_rate(struct atkbd *atkbd)
+{
+	const short period[32] =
+		{ 33,  37,  42,  46,  50,  54,  58,  63,  67,  75,  83,  92, 100, 109, 116, 125,
+		 133, 149, 167, 182, 200, 217, 232, 250, 270, 303, 333, 370, 400, 435, 470, 500 };
+	const short delay[4] =
+		{ 250, 500, 750, 1000 };
+
+	struct input_dev *dev = atkbd->dev;
+	unsigned char param;
+	int i = 0, j = 0;
+
+	while (i < ARRAY_SIZE(period) - 1 && period[i] < dev->rep[REP_PERIOD])
+		i++;
+	dev->rep[REP_PERIOD] = period[i];
+
+	while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY])
+		j++;
+	dev->rep[REP_DELAY] = delay[j];
+
+	param = i | (j << 5);
+	return ps2_command(&atkbd->ps2dev, &param, ATKBD_CMD_SETREP);
+}
+
+static int atkbd_set_leds(struct atkbd *atkbd)
+{
+	struct input_dev *dev = atkbd->dev;
+	unsigned char param[2];
+
+	param[0] = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0)
+		 | (test_bit(LED_NUML,    dev->led) ? 2 : 0)
+		 | (test_bit(LED_CAPSL,   dev->led) ? 4 : 0);
+	if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS))
+		return -1;
+
+	if (atkbd->extra) {
+		param[0] = 0;
+		param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0)
+			 | (test_bit(LED_SLEEP,   dev->led) ? 0x02 : 0)
+			 | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0)
+			 | (test_bit(LED_MISC,    dev->led) ? 0x10 : 0)
+			 | (test_bit(LED_MUTE,    dev->led) ? 0x20 : 0);
+		if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_EX_SETLEDS))
+			return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * atkbd_event_work() is used to complete processing of events that
+ * can not be processed by input_event() which is often called from
+ * interrupt context.
+ */
+
+static void atkbd_event_work(struct work_struct *work)
+{
+	struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work);
+
+	mutex_lock(&atkbd->mutex);
+
+	if (!atkbd->enabled) {
+		/*
+		 * Serio ports are resumed asynchronously so while driver core
+		 * thinks that device is already fully operational in reality
+		 * it may not be ready yet. In this case we need to keep
+		 * rescheduling till reconnect completes.
+		 */
+		schedule_delayed_work(&atkbd->event_work,
+					msecs_to_jiffies(100));
+	} else {
+		if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask))
+			atkbd_set_leds(atkbd);
+
+		if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask))
+			atkbd_set_repeat_rate(atkbd);
+	}
+
+	mutex_unlock(&atkbd->mutex);
+}
+
+/*
+ * Schedule switch for execution. We need to throttle requests,
+ * otherwise keyboard may become unresponsive.
+ */
+static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit)
+{
+	unsigned long delay = msecs_to_jiffies(50);
+
+	if (time_after(jiffies, atkbd->event_jiffies + delay))
+		delay = 0;
+
+	atkbd->event_jiffies = jiffies;
+	set_bit(event_bit, &atkbd->event_mask);
+	mb();
+	schedule_delayed_work(&atkbd->event_work, delay);
+}
+
+/*
+ * Event callback from the input module. Events that change the state of
+ * the hardware are processed here. If action can not be performed in
+ * interrupt context it is offloaded to atkbd_event_work.
+ */
+
+static int atkbd_event(struct input_dev *dev,
+			unsigned int type, unsigned int code, int value)
+{
+	struct atkbd *atkbd = input_get_drvdata(dev);
+
+	if (!atkbd->write)
+		return -1;
+
+	switch (type) {
+
+	case EV_LED:
+		atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT);
+		return 0;
+
+	case EV_REP:
+		if (!atkbd->softrepeat)
+			atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT);
+		return 0;
+
+	default:
+		return -1;
+	}
+}
+
+/*
+ * atkbd_enable() signals that interrupt handler is allowed to
+ * generate input events.
+ */
+
+static inline void atkbd_enable(struct atkbd *atkbd)
+{
+	serio_pause_rx(atkbd->ps2dev.serio);
+	atkbd->enabled = true;
+	serio_continue_rx(atkbd->ps2dev.serio);
+}
+
+/*
+ * atkbd_disable() tells input handler that all incoming data except
+ * for ACKs and command response should be dropped.
+ */
+
+static inline void atkbd_disable(struct atkbd *atkbd)
+{
+	serio_pause_rx(atkbd->ps2dev.serio);
+	atkbd->enabled = false;
+	serio_continue_rx(atkbd->ps2dev.serio);
+}
+
+static int atkbd_activate(struct atkbd *atkbd)
+{
+	struct ps2dev *ps2dev = &atkbd->ps2dev;
+
+/*
+ * Enable the keyboard to receive keystrokes.
+ */
+
+	if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
+		dev_err(&ps2dev->serio->dev,
+			"Failed to enable keyboard on %s\n",
+			ps2dev->serio->phys);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * atkbd_deactivate() resets and disables the keyboard from sending
+ * keystrokes.
+ */
+
+static void atkbd_deactivate(struct atkbd *atkbd)
+{
+	struct ps2dev *ps2dev = &atkbd->ps2dev;
+
+	if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS))
+		dev_err(&ps2dev->serio->dev,
+			"Failed to deactivate keyboard on %s\n",
+			ps2dev->serio->phys);
+}
+
+#ifdef CONFIG_X86
+static bool atkbd_is_portable_device(void)
+{
+	static const char * const chassis_types[] = {
+		"8",	/* Portable */
+		"9",	/* Laptop */
+		"10",	/* Notebook */
+		"14",	/* Sub-Notebook */
+		"31",	/* Convertible */
+		"32",	/* Detachable */
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(chassis_types); i++)
+		if (dmi_match(DMI_CHASSIS_TYPE, chassis_types[i]))
+			return true;
+
+	return false;
+}
+
+/*
+ * On many modern laptops ATKBD_CMD_GETID may cause problems, on these laptops
+ * the controller is always in translated mode. In this mode mice/touchpads will
+ * not work. So in this case simply assume a keyboard is connected to avoid
+ * confusing some laptop keyboards.
+ *
+ * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using the standard
+ * 0xab83 id is ok in translated mode, only atkbd_select_set() checks atkbd->id
+ * and in translated mode that is a no-op.
+ */
+static bool atkbd_skip_getid(struct atkbd *atkbd)
+{
+	return atkbd->translated && atkbd_is_portable_device();
+}
+#else
+static inline bool atkbd_skip_getid(struct atkbd *atkbd) { return false; }
+#endif
+
+/*
+ * atkbd_probe() probes for an AT keyboard on a serio port.
+ */
+
+static int atkbd_probe(struct atkbd *atkbd)
+{
+	struct ps2dev *ps2dev = &atkbd->ps2dev;
+	unsigned char param[2];
+	bool skip_getid;
+
+/*
+ * Some systems, where the bit-twiddling when testing the io-lines of the
+ * controller may confuse the keyboard need a full reset of the keyboard. On
+ * these systems the BIOS also usually doesn't do it for us.
+ */
+
+	if (atkbd_reset)
+		if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT))
+			dev_warn(&ps2dev->serio->dev,
+				 "keyboard reset failed on %s\n",
+				 ps2dev->serio->phys);
+
+/*
+ * Then we check the keyboard ID. We should get 0xab83 under normal conditions.
+ * Some keyboards report different values, but the first byte is always 0xab or
+ * 0xac. Some old AT keyboards don't report anything. If a mouse is connected, this
+ * should make sure we don't try to set the LEDs on it.
+ */
+
+	param[0] = param[1] = 0xa5;	/* initialize with invalid values */
+	skip_getid = atkbd_skip_getid(atkbd);
+	if (skip_getid || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+
+/*
+ * If the get ID command was skipped or failed, we check if we can at least set
+ * the LEDs on the keyboard. This should work on every keyboard out there.
+ * It also turns the LEDs off, which we want anyway.
+ */
+		param[0] = 0;
+		if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
+			return -1;
+		atkbd->id = skip_getid ? 0xab83 : 0xabba;
+		return 0;
+	}
+
+	if (!ps2_is_keyboard_id(param[0]))
+		return -1;
+
+	atkbd->id = (param[0] << 8) | param[1];
+
+	if (atkbd->id == 0xaca1 && atkbd->translated) {
+		dev_err(&ps2dev->serio->dev,
+			"NCD terminal keyboards are only supported on non-translating controllers. "
+			"Use i8042.direct=1 to disable translation.\n");
+		return -1;
+	}
+
+/*
+ * Make sure nothing is coming from the keyboard and disturbs our
+ * internal state.
+ */
+	if (!atkbd_skip_deactivate)
+		atkbd_deactivate(atkbd);
+
+	return 0;
+}
+
+/*
+ * atkbd_select_set checks if a keyboard has a working Set 3 support, and
+ * sets it into that. Unfortunately there are keyboards that can be switched
+ * to Set 3, but don't work well in that (BTC Multimedia ...)
+ */
+
+static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra)
+{
+	struct ps2dev *ps2dev = &atkbd->ps2dev;
+	unsigned char param[2];
+
+	atkbd->extra = false;
+/*
+ * For known special keyboards we can go ahead and set the correct set.
+ * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and
+ * IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards.
+ */
+
+	if (atkbd->translated)
+		return 2;
+
+	if (atkbd->id == 0xaca1) {
+		param[0] = 3;
+		ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET);
+		return 3;
+	}
+
+	if (allow_extra) {
+		param[0] = 0x71;
+		if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) {
+			atkbd->extra = true;
+			return 2;
+		}
+	}
+
+	if (atkbd_terminal) {
+		ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB);
+		return 3;
+	}
+
+	if (target_set != 3)
+		return 2;
+
+	if (!ps2_command(ps2dev, param, ATKBD_CMD_OK_GETID)) {
+		atkbd->id = param[0] << 8 | param[1];
+		return 2;
+	}
+
+	param[0] = 3;
+	if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
+		return 2;
+
+	param[0] = 0;
+	if (ps2_command(ps2dev, param, ATKBD_CMD_GSCANSET))
+		return 2;
+
+	if (param[0] != 3) {
+		param[0] = 2;
+		if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
+			return 2;
+	}
+
+	ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR);
+
+	return 3;
+}
+
+static int atkbd_reset_state(struct atkbd *atkbd)
+{
+        struct ps2dev *ps2dev = &atkbd->ps2dev;
+	unsigned char param[1];
+
+/*
+ * Set the LEDs to a predefined state (all off).
+ */
+
+	param[0] = 0;
+	if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
+		return -1;
+
+/*
+ * Set autorepeat to fastest possible.
+ */
+
+	param[0] = 0;
+	if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP))
+		return -1;
+
+	return 0;
+}
+
+/*
+ * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a
+ * reboot.
+ */
+
+static void atkbd_cleanup(struct serio *serio)
+{
+	struct atkbd *atkbd = serio_get_drvdata(serio);
+
+	atkbd_disable(atkbd);
+	ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF);
+}
+
+
+/*
+ * atkbd_disconnect() closes and frees.
+ */
+
+static void atkbd_disconnect(struct serio *serio)
+{
+	struct atkbd *atkbd = serio_get_drvdata(serio);
+
+	sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
+
+	atkbd_disable(atkbd);
+
+	input_unregister_device(atkbd->dev);
+
+	/*
+	 * Make sure we don't have a command in flight.
+	 * Note that since atkbd->enabled is false event work will keep
+	 * rescheduling itself until it gets canceled and will not try
+	 * accessing freed input device or serio port.
+	 */
+	cancel_delayed_work_sync(&atkbd->event_work);
+
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	kfree(atkbd);
+}
+
+/*
+ * generate release events for the keycodes given in data
+ */
+static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd,
+						const void *data)
+{
+	const unsigned int *keys = data;
+	unsigned int i;
+
+	if (atkbd->set == 2)
+		for (i = 0; keys[i] != -1U; i++)
+			__set_bit(keys[i], atkbd->force_release_mask);
+}
+
+/*
+ * Most special keys (Fn+F?) on Dell laptops do not generate release
+ * events so we have to do it ourselves.
+ */
+static unsigned int atkbd_dell_laptop_forced_release_keys[] = {
+	0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U
+};
+
+/*
+ * Perform fixup for HP system that doesn't generate release
+ * for its video switch
+ */
+static unsigned int atkbd_hp_forced_release_keys[] = {
+	0x94, -1U
+};
+
+/*
+ * Samsung NC10,NC20 with Fn+F? key release not working
+ */
+static unsigned int atkbd_samsung_forced_release_keys[] = {
+	0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
+};
+
+/*
+ * Amilo Pi 3525 key release for Fn+Volume keys not working
+ */
+static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = {
+	0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U
+};
+
+/*
+ * Amilo Xi 3650 key release for light touch bar not working
+ */
+static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
+	0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
+};
+
+/*
+ * Soltech TA12 system with broken key release on volume keys and mute key
+ */
+static unsigned int atkdb_soltech_ta12_forced_release_keys[] = {
+	0xa0, 0xae, 0xb0, -1U
+};
+
+/*
+ * Many notebooks don't send key release event for volume up/down
+ * keys, with key list below common among them
+ */
+static unsigned int atkbd_volume_forced_release_keys[] = {
+	0xae, 0xb0, -1U
+};
+
+/*
+ * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas
+ * they should be generating e4-e6 (0x80 | code).
+ */
+static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd,
+						    unsigned int code)
+{
+	if (atkbd->translated && atkbd->emul == 1 &&
+	    (code == 0x64 || code == 0x65 || code == 0x66)) {
+		atkbd->emul = 0;
+		code |= 0x80;
+	}
+
+	return code;
+}
+
+static int atkbd_get_keymap_from_fwnode(struct atkbd *atkbd)
+{
+	struct device *dev = &atkbd->ps2dev.serio->dev;
+	int i, n;
+	u32 *ptr;
+	u16 scancode, keycode;
+
+	/* Parse "linux,keymap" property */
+	n = device_property_count_u32(dev, "linux,keymap");
+	if (n <= 0 || n > ATKBD_KEYMAP_SIZE)
+		return -ENXIO;
+
+	ptr = kcalloc(n, sizeof(u32), GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	if (device_property_read_u32_array(dev, "linux,keymap", ptr, n)) {
+		dev_err(dev, "problem parsing FW keymap property\n");
+		kfree(ptr);
+		return -EINVAL;
+	}
+
+	memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
+	for (i = 0; i < n; i++) {
+		scancode = SCANCODE(ptr[i]);
+		keycode = KEYCODE(ptr[i]);
+		atkbd->keycode[scancode] = keycode;
+	}
+
+	kfree(ptr);
+	return 0;
+}
+
+/*
+ * atkbd_set_keycode_table() initializes keyboard's keycode table
+ * according to the selected scancode set
+ */
+
+static void atkbd_set_keycode_table(struct atkbd *atkbd)
+{
+	struct device *dev = &atkbd->ps2dev.serio->dev;
+	unsigned int scancode;
+	int i, j;
+
+	memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
+	bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE);
+
+	if (!atkbd_get_keymap_from_fwnode(atkbd)) {
+		dev_dbg(dev, "Using FW keymap\n");
+	} else if (atkbd->translated) {
+		for (i = 0; i < 128; i++) {
+			scancode = atkbd_unxlate_table[i];
+			atkbd->keycode[i] = atkbd_set2_keycode[scancode];
+			atkbd->keycode[i | 0x80] = atkbd_set2_keycode[scancode | 0x80];
+			if (atkbd->scroll)
+				for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++)
+					if ((scancode | 0x80) == atkbd_scroll_keys[j].set2)
+						atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
+		}
+	} else if (atkbd->set == 3) {
+		memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
+	} else {
+		memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
+
+		if (atkbd->scroll)
+			for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) {
+				scancode = atkbd_scroll_keys[i].set2;
+				atkbd->keycode[scancode] = atkbd_scroll_keys[i].keycode;
+		}
+	}
+
+/*
+ * HANGEUL and HANJA keys do not send release events so we need to
+ * generate such events ourselves
+ */
+	scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL);
+	atkbd->keycode[scancode] = KEY_HANGEUL;
+	__set_bit(scancode, atkbd->force_release_mask);
+
+	scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA);
+	atkbd->keycode[scancode] = KEY_HANJA;
+	__set_bit(scancode, atkbd->force_release_mask);
+
+/*
+ * Perform additional fixups
+ */
+	if (atkbd_platform_fixup)
+		atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data);
+}
+
+/*
+ * atkbd_set_device_attrs() sets up keyboard's input device structure
+ */
+
+static void atkbd_set_device_attrs(struct atkbd *atkbd)
+{
+	struct input_dev *input_dev = atkbd->dev;
+	int i;
+
+	if (atkbd->extra)
+		snprintf(atkbd->name, sizeof(atkbd->name),
+			 "AT Set 2 Extra keyboard");
+	else
+		snprintf(atkbd->name, sizeof(atkbd->name),
+			 "AT %s Set %d keyboard",
+			 atkbd->translated ? "Translated" : "Raw", atkbd->set);
+
+	snprintf(atkbd->phys, sizeof(atkbd->phys),
+		 "%s/input0", atkbd->ps2dev.serio->phys);
+
+	input_dev->name = atkbd->name;
+	input_dev->phys = atkbd->phys;
+	input_dev->id.bustype = BUS_I8042;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = atkbd->translated ? 1 : atkbd->set;
+	input_dev->id.version = atkbd->id;
+	input_dev->event = atkbd_event;
+	input_dev->dev.parent = &atkbd->ps2dev.serio->dev;
+
+	input_set_drvdata(input_dev, atkbd);
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
+		BIT_MASK(EV_MSC);
+
+	if (atkbd->write) {
+		input_dev->evbit[0] |= BIT_MASK(EV_LED);
+		input_dev->ledbit[0] = BIT_MASK(LED_NUML) |
+			BIT_MASK(LED_CAPSL) | BIT_MASK(LED_SCROLLL);
+	}
+
+	if (atkbd->extra)
+		input_dev->ledbit[0] |= BIT_MASK(LED_COMPOSE) |
+			BIT_MASK(LED_SUSPEND) | BIT_MASK(LED_SLEEP) |
+			BIT_MASK(LED_MUTE) | BIT_MASK(LED_MISC);
+
+	if (!atkbd->softrepeat) {
+		input_dev->rep[REP_DELAY] = 250;
+		input_dev->rep[REP_PERIOD] = 33;
+	}
+
+	input_dev->mscbit[0] = atkbd->softraw ? BIT_MASK(MSC_SCAN) :
+		BIT_MASK(MSC_RAW) | BIT_MASK(MSC_SCAN);
+
+	if (atkbd->scroll) {
+		input_dev->evbit[0] |= BIT_MASK(EV_REL);
+		input_dev->relbit[0] = BIT_MASK(REL_WHEEL) |
+			BIT_MASK(REL_HWHEEL);
+		__set_bit(BTN_MIDDLE, input_dev->keybit);
+	}
+
+	input_dev->keycode = atkbd->keycode;
+	input_dev->keycodesize = sizeof(unsigned short);
+	input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
+
+	for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) {
+		if (atkbd->keycode[i] != KEY_RESERVED &&
+		    atkbd->keycode[i] != ATKBD_KEY_NULL &&
+		    atkbd->keycode[i] < ATKBD_SPECIAL) {
+			__set_bit(atkbd->keycode[i], input_dev->keybit);
+		}
+	}
+}
+
+static void atkbd_parse_fwnode_data(struct serio *serio)
+{
+	struct atkbd *atkbd = serio_get_drvdata(serio);
+	struct device *dev = &serio->dev;
+	int n;
+
+	/* Parse "function-row-physmap" property */
+	n = device_property_count_u32(dev, "function-row-physmap");
+	if (n > 0 && n <= MAX_FUNCTION_ROW_KEYS &&
+	    !device_property_read_u32_array(dev, "function-row-physmap",
+					    atkbd->function_row_physmap, n)) {
+		atkbd->num_function_row_keys = n;
+		dev_dbg(dev, "FW reported %d function-row key locations\n", n);
+	}
+}
+
+/*
+ * atkbd_connect() is called when the serio module finds an interface
+ * that isn't handled yet by an appropriate device driver. We check if
+ * there is an AT keyboard out there and if yes, we register ourselves
+ * to the input module.
+ */
+
+static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct atkbd *atkbd;
+	struct input_dev *dev;
+	int err = -ENOMEM;
+
+	atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL);
+	dev = input_allocate_device();
+	if (!atkbd || !dev)
+		goto fail1;
+
+	atkbd->dev = dev;
+	ps2_init(&atkbd->ps2dev, serio);
+	INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
+	mutex_init(&atkbd->mutex);
+
+	switch (serio->id.type) {
+
+	case SERIO_8042_XL:
+		atkbd->translated = true;
+		fallthrough;
+
+	case SERIO_8042:
+		if (serio->write)
+			atkbd->write = true;
+		break;
+	}
+
+	atkbd->softraw = atkbd_softraw;
+	atkbd->softrepeat = atkbd_softrepeat;
+	atkbd->scroll = atkbd_scroll;
+
+	if (atkbd->softrepeat)
+		atkbd->softraw = true;
+
+	serio_set_drvdata(serio, atkbd);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	if (atkbd->write) {
+
+		if (atkbd_probe(atkbd)) {
+			err = -ENODEV;
+			goto fail3;
+		}
+
+		atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
+		atkbd_reset_state(atkbd);
+
+	} else {
+		atkbd->set = 2;
+		atkbd->id = 0xab00;
+	}
+
+	atkbd_parse_fwnode_data(serio);
+
+	atkbd_set_keycode_table(atkbd);
+	atkbd_set_device_attrs(atkbd);
+
+	err = sysfs_create_group(&serio->dev.kobj, &atkbd_attribute_group);
+	if (err)
+		goto fail3;
+
+	atkbd_enable(atkbd);
+	if (serio->write)
+		atkbd_activate(atkbd);
+
+	err = input_register_device(atkbd->dev);
+	if (err)
+		goto fail4;
+
+	return 0;
+
+ fail4: sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(dev);
+	kfree(atkbd);
+	return err;
+}
+
+/*
+ * atkbd_reconnect() tries to restore keyboard into a sane state and is
+ * most likely called on resume.
+ */
+
+static int atkbd_reconnect(struct serio *serio)
+{
+	struct atkbd *atkbd = serio_get_drvdata(serio);
+	struct serio_driver *drv = serio->drv;
+	int retval = -1;
+
+	if (!atkbd || !drv) {
+		dev_dbg(&serio->dev,
+			"reconnect request, but serio is disconnected, ignoring...\n");
+		return -1;
+	}
+
+	mutex_lock(&atkbd->mutex);
+
+	atkbd_disable(atkbd);
+
+	if (atkbd->write) {
+		if (atkbd_probe(atkbd))
+			goto out;
+
+		if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
+			goto out;
+
+		/*
+		 * Restore LED state and repeat rate. While input core
+		 * will do this for us at resume time reconnect may happen
+		 * because user requested it via sysfs or simply because
+		 * keyboard was unplugged and plugged in again so we need
+		 * to do it ourselves here.
+		 */
+		atkbd_set_leds(atkbd);
+		if (!atkbd->softrepeat)
+			atkbd_set_repeat_rate(atkbd);
+
+	}
+
+	/*
+	 * Reset our state machine in case reconnect happened in the middle
+	 * of multi-byte scancode.
+	 */
+	atkbd->xl_bit = 0;
+	atkbd->emul = 0;
+
+	atkbd_enable(atkbd);
+	if (atkbd->write)
+		atkbd_activate(atkbd);
+
+	retval = 0;
+
+ out:
+	mutex_unlock(&atkbd->mutex);
+	return retval;
+}
+
+static const struct serio_device_id atkbd_serio_ids[] = {
+	{
+		.type	= SERIO_8042,
+		.proto	= SERIO_ANY,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_8042_XL,
+		.proto	= SERIO_ANY,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_PS2SER,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, atkbd_serio_ids);
+
+static struct serio_driver atkbd_drv = {
+	.driver		= {
+		.name	= "atkbd",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= atkbd_serio_ids,
+	.interrupt	= atkbd_interrupt,
+	.connect	= atkbd_connect,
+	.reconnect	= atkbd_reconnect,
+	.disconnect	= atkbd_disconnect,
+	.cleanup	= atkbd_cleanup,
+};
+
+static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
+				ssize_t (*handler)(struct atkbd *, char *))
+{
+	struct serio *serio = to_serio_port(dev);
+	struct atkbd *atkbd = serio_get_drvdata(serio);
+
+	return handler(atkbd, buf);
+}
+
+static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
+				ssize_t (*handler)(struct atkbd *, const char *, size_t))
+{
+	struct serio *serio = to_serio_port(dev);
+	struct atkbd *atkbd = serio_get_drvdata(serio);
+	int retval;
+
+	retval = mutex_lock_interruptible(&atkbd->mutex);
+	if (retval)
+		return retval;
+
+	atkbd_disable(atkbd);
+	retval = handler(atkbd, buf, count);
+	atkbd_enable(atkbd);
+
+	mutex_unlock(&atkbd->mutex);
+
+	return retval;
+}
+
+static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf)
+{
+	return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0);
+}
+
+static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
+{
+	struct input_dev *old_dev, *new_dev;
+	unsigned int value;
+	int err;
+	bool old_extra;
+	unsigned char old_set;
+
+	if (!atkbd->write)
+		return -EIO;
+
+	err = kstrtouint(buf, 10, &value);
+	if (err)
+		return err;
+
+	if (value > 1)
+		return -EINVAL;
+
+	if (atkbd->extra != value) {
+		/*
+		 * Since device's properties will change we need to
+		 * unregister old device. But allocate and register
+		 * new one first to make sure we have it.
+		 */
+		old_dev = atkbd->dev;
+		old_extra = atkbd->extra;
+		old_set = atkbd->set;
+
+		new_dev = input_allocate_device();
+		if (!new_dev)
+			return -ENOMEM;
+
+		atkbd->dev = new_dev;
+		atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
+		atkbd_reset_state(atkbd);
+		atkbd_activate(atkbd);
+		atkbd_set_keycode_table(atkbd);
+		atkbd_set_device_attrs(atkbd);
+
+		err = input_register_device(atkbd->dev);
+		if (err) {
+			input_free_device(new_dev);
+
+			atkbd->dev = old_dev;
+			atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
+			atkbd_set_keycode_table(atkbd);
+			atkbd_set_device_attrs(atkbd);
+
+			return err;
+		}
+		input_unregister_device(old_dev);
+
+	}
+	return count;
+}
+
+static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf)
+{
+	size_t len = scnprintf(buf, PAGE_SIZE - 1, "%*pbl",
+			       ATKBD_KEYMAP_SIZE, atkbd->force_release_mask);
+
+	buf[len++] = '\n';
+	buf[len] = '\0';
+
+	return len;
+}
+
+static ssize_t atkbd_set_force_release(struct atkbd *atkbd,
+					const char *buf, size_t count)
+{
+	/* 64 bytes on stack should be acceptable */
+	DECLARE_BITMAP(new_mask, ATKBD_KEYMAP_SIZE);
+	int err;
+
+	err = bitmap_parselist(buf, new_mask, ATKBD_KEYMAP_SIZE);
+	if (err)
+		return err;
+
+	memcpy(atkbd->force_release_mask, new_mask, sizeof(atkbd->force_release_mask));
+	return count;
+}
+
+
+static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf)
+{
+	return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0);
+}
+
+static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count)
+{
+	struct input_dev *old_dev, *new_dev;
+	unsigned int value;
+	int err;
+	bool old_scroll;
+
+	err = kstrtouint(buf, 10, &value);
+	if (err)
+		return err;
+
+	if (value > 1)
+		return -EINVAL;
+
+	if (atkbd->scroll != value) {
+		old_dev = atkbd->dev;
+		old_scroll = atkbd->scroll;
+
+		new_dev = input_allocate_device();
+		if (!new_dev)
+			return -ENOMEM;
+
+		atkbd->dev = new_dev;
+		atkbd->scroll = value;
+		atkbd_set_keycode_table(atkbd);
+		atkbd_set_device_attrs(atkbd);
+
+		err = input_register_device(atkbd->dev);
+		if (err) {
+			input_free_device(new_dev);
+
+			atkbd->scroll = old_scroll;
+			atkbd->dev = old_dev;
+			atkbd_set_keycode_table(atkbd);
+			atkbd_set_device_attrs(atkbd);
+
+			return err;
+		}
+		input_unregister_device(old_dev);
+	}
+	return count;
+}
+
+static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf)
+{
+	return sprintf(buf, "%d\n", atkbd->set);
+}
+
+static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
+{
+	struct input_dev *old_dev, *new_dev;
+	unsigned int value;
+	int err;
+	unsigned char old_set;
+	bool old_extra;
+
+	if (!atkbd->write)
+		return -EIO;
+
+	err = kstrtouint(buf, 10, &value);
+	if (err)
+		return err;
+
+	if (value != 2 && value != 3)
+		return -EINVAL;
+
+	if (atkbd->set != value) {
+		old_dev = atkbd->dev;
+		old_extra = atkbd->extra;
+		old_set = atkbd->set;
+
+		new_dev = input_allocate_device();
+		if (!new_dev)
+			return -ENOMEM;
+
+		atkbd->dev = new_dev;
+		atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
+		atkbd_reset_state(atkbd);
+		atkbd_activate(atkbd);
+		atkbd_set_keycode_table(atkbd);
+		atkbd_set_device_attrs(atkbd);
+
+		err = input_register_device(atkbd->dev);
+		if (err) {
+			input_free_device(new_dev);
+
+			atkbd->dev = old_dev;
+			atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
+			atkbd_set_keycode_table(atkbd);
+			atkbd_set_device_attrs(atkbd);
+
+			return err;
+		}
+		input_unregister_device(old_dev);
+	}
+	return count;
+}
+
+static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf)
+{
+	return sprintf(buf, "%d\n", atkbd->softrepeat ? 1 : 0);
+}
+
+static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count)
+{
+	struct input_dev *old_dev, *new_dev;
+	unsigned int value;
+	int err;
+	bool old_softrepeat, old_softraw;
+
+	if (!atkbd->write)
+		return -EIO;
+
+	err = kstrtouint(buf, 10, &value);
+	if (err)
+		return err;
+
+	if (value > 1)
+		return -EINVAL;
+
+	if (atkbd->softrepeat != value) {
+		old_dev = atkbd->dev;
+		old_softrepeat = atkbd->softrepeat;
+		old_softraw = atkbd->softraw;
+
+		new_dev = input_allocate_device();
+		if (!new_dev)
+			return -ENOMEM;
+
+		atkbd->dev = new_dev;
+		atkbd->softrepeat = value;
+		if (atkbd->softrepeat)
+			atkbd->softraw = true;
+		atkbd_set_device_attrs(atkbd);
+
+		err = input_register_device(atkbd->dev);
+		if (err) {
+			input_free_device(new_dev);
+
+			atkbd->dev = old_dev;
+			atkbd->softrepeat = old_softrepeat;
+			atkbd->softraw = old_softraw;
+			atkbd_set_device_attrs(atkbd);
+
+			return err;
+		}
+		input_unregister_device(old_dev);
+	}
+	return count;
+}
+
+
+static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf)
+{
+	return sprintf(buf, "%d\n", atkbd->softraw ? 1 : 0);
+}
+
+static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count)
+{
+	struct input_dev *old_dev, *new_dev;
+	unsigned int value;
+	int err;
+	bool old_softraw;
+
+	err = kstrtouint(buf, 10, &value);
+	if (err)
+		return err;
+
+	if (value > 1)
+		return -EINVAL;
+
+	if (atkbd->softraw != value) {
+		old_dev = atkbd->dev;
+		old_softraw = atkbd->softraw;
+
+		new_dev = input_allocate_device();
+		if (!new_dev)
+			return -ENOMEM;
+
+		atkbd->dev = new_dev;
+		atkbd->softraw = value;
+		atkbd_set_device_attrs(atkbd);
+
+		err = input_register_device(atkbd->dev);
+		if (err) {
+			input_free_device(new_dev);
+
+			atkbd->dev = old_dev;
+			atkbd->softraw = old_softraw;
+			atkbd_set_device_attrs(atkbd);
+
+			return err;
+		}
+		input_unregister_device(old_dev);
+	}
+	return count;
+}
+
+static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf)
+{
+	return sprintf(buf, "%lu\n", atkbd->err_count);
+}
+
+static int __init atkbd_setup_forced_release(const struct dmi_system_id *id)
+{
+	atkbd_platform_fixup = atkbd_apply_forced_release_keylist;
+	atkbd_platform_fixup_data = id->driver_data;
+
+	return 1;
+}
+
+static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id)
+{
+	atkbd_platform_scancode_fixup = id->driver_data;
+
+	return 1;
+}
+
+static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id)
+{
+	atkbd_skip_deactivate = true;
+	return 1;
+}
+
+/*
+ * NOTE: do not add any more "force release" quirks to this table.  The
+ * task of adjusting list of keys that should be "released" automatically
+ * by the driver is now delegated to userspace tools, such as udev, so
+ * submit such quirks there.
+ */
+static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_dell_laptop_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_dell_laptop_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_hp_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		/* Inventec Symphony */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		/* Samsung NC10 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
+		/* Samsung NC20 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
+		/* Samsung SQ45S70S */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
+		/* Fujitsu Amilo PA 1510 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_volume_forced_release_keys,
+	},
+	{
+		/* Fujitsu Amilo Pi 3525 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_amilo_pi3525_forced_release_keys,
+	},
+	{
+		/* Fujitsu Amilo Xi 3650 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_amilo_xi3650_forced_release_keys,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkdb_soltech_ta12_forced_release_keys,
+	},
+	{
+		/* OQO Model 01+ */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
+		},
+		.callback = atkbd_setup_scancode_fixup,
+		.driver_data = atkbd_oqo_01plus_scancode_fixup,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
+		},
+		.callback = atkbd_deactivate_fixup,
+	},
+	{ }
+};
+
+static int __init atkbd_init(void)
+{
+	dmi_check_system(atkbd_dmi_quirk_table);
+
+	return serio_register_driver(&atkbd_drv);
+}
+
+static void __exit atkbd_exit(void)
+{
+	serio_unregister_driver(&atkbd_drv);
+}
+
+module_init(atkbd_init);
+module_exit(atkbd_exit);
diff --git a/drivers/input/keyboard/bcm-keypad.c b/drivers/input/keyboard/bcm-keypad.c
new file mode 100644
index 000000000..2b771c3a5
--- /dev/null
+++ b/drivers/input/keyboard/bcm-keypad.c
@@ -0,0 +1,454 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/gfp.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#define DEFAULT_CLK_HZ			31250
+#define MAX_ROWS			8
+#define MAX_COLS			8
+
+/* Register/field definitions */
+#define KPCR_OFFSET			0x00000080
+#define KPCR_MODE			0x00000002
+#define KPCR_MODE_SHIFT			1
+#define KPCR_MODE_MASK			1
+#define KPCR_ENABLE			0x00000001
+#define KPCR_STATUSFILTERENABLE		0x00008000
+#define KPCR_STATUSFILTERTYPE_SHIFT	12
+#define KPCR_COLFILTERENABLE		0x00000800
+#define KPCR_COLFILTERTYPE_SHIFT	8
+#define KPCR_ROWWIDTH_SHIFT		20
+#define KPCR_COLUMNWIDTH_SHIFT		16
+
+#define KPIOR_OFFSET			0x00000084
+#define KPIOR_ROWOCONTRL_SHIFT		24
+#define KPIOR_ROWOCONTRL_MASK		0xFF000000
+#define KPIOR_COLUMNOCONTRL_SHIFT	16
+#define KPIOR_COLUMNOCONTRL_MASK	0x00FF0000
+#define KPIOR_COLUMN_IO_DATA_SHIFT	0
+
+#define KPEMR0_OFFSET			0x00000090
+#define KPEMR1_OFFSET			0x00000094
+#define KPEMR2_OFFSET			0x00000098
+#define KPEMR3_OFFSET			0x0000009C
+#define KPEMR_EDGETYPE_BOTH		3
+
+#define KPSSR0_OFFSET			0x000000A0
+#define KPSSR1_OFFSET			0x000000A4
+#define KPSSRN_OFFSET(reg_n)		(KPSSR0_OFFSET + 4 * (reg_n))
+#define KPIMR0_OFFSET			0x000000B0
+#define KPIMR1_OFFSET			0x000000B4
+#define KPICR0_OFFSET			0x000000B8
+#define KPICR1_OFFSET			0x000000BC
+#define KPICRN_OFFSET(reg_n)		(KPICR0_OFFSET + 4 * (reg_n))
+#define KPISR0_OFFSET			0x000000C0
+#define KPISR1_OFFSET			0x000000C4
+
+#define KPCR_STATUSFILTERTYPE_MAX	7
+#define KPCR_COLFILTERTYPE_MAX		7
+
+/* Macros to determine the row/column from a bit that is set in SSR0/1. */
+#define BIT_TO_ROW_SSRN(bit_nr, reg_n)	(((bit_nr) >> 3) + 4 * (reg_n))
+#define BIT_TO_COL(bit_nr)		((bit_nr) % 8)
+
+/* Structure representing various run-time entities */
+struct bcm_kp {
+	void __iomem *base;
+	int irq;
+	struct clk *clk;
+	struct input_dev *input_dev;
+	unsigned long last_state[2];
+	unsigned int n_rows;
+	unsigned int n_cols;
+	u32 kpcr;
+	u32 kpior;
+	u32 kpemr;
+	u32 imr0_val;
+	u32 imr1_val;
+};
+
+/*
+ * Returns the keycode from the input device keymap given the row and
+ * column.
+ */
+static int bcm_kp_get_keycode(struct bcm_kp *kp, int row, int col)
+{
+	unsigned int row_shift = get_count_order(kp->n_cols);
+	unsigned short *keymap = kp->input_dev->keycode;
+
+	return keymap[MATRIX_SCAN_CODE(row, col, row_shift)];
+}
+
+static void bcm_kp_report_keys(struct bcm_kp *kp, int reg_num, int pull_mode)
+{
+	unsigned long state, change;
+	int bit_nr;
+	int key_press;
+	int row, col;
+	unsigned int keycode;
+
+	/* Clear interrupts */
+	writel(0xFFFFFFFF, kp->base + KPICRN_OFFSET(reg_num));
+
+	state = readl(kp->base + KPSSRN_OFFSET(reg_num));
+	change = kp->last_state[reg_num] ^ state;
+	kp->last_state[reg_num] = state;
+
+	for_each_set_bit(bit_nr, &change, BITS_PER_LONG) {
+		key_press = state & BIT(bit_nr);
+		/* The meaning of SSR register depends on pull mode. */
+		key_press = pull_mode ? !key_press : key_press;
+		row = BIT_TO_ROW_SSRN(bit_nr, reg_num);
+		col = BIT_TO_COL(bit_nr);
+		keycode = bcm_kp_get_keycode(kp, row, col);
+		input_report_key(kp->input_dev, keycode, key_press);
+	}
+}
+
+static irqreturn_t bcm_kp_isr_thread(int irq, void *dev_id)
+{
+	struct bcm_kp *kp = dev_id;
+	int pull_mode = (kp->kpcr >> KPCR_MODE_SHIFT) & KPCR_MODE_MASK;
+	int reg_num;
+
+	for (reg_num = 0; reg_num <= 1; reg_num++)
+		bcm_kp_report_keys(kp, reg_num, pull_mode);
+
+	input_sync(kp->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int bcm_kp_start(struct bcm_kp *kp)
+{
+	int error;
+
+	if (kp->clk) {
+		error = clk_prepare_enable(kp->clk);
+		if (error)
+			return error;
+	}
+
+	writel(kp->kpior, kp->base + KPIOR_OFFSET);
+
+	writel(kp->imr0_val, kp->base + KPIMR0_OFFSET);
+	writel(kp->imr1_val, kp->base + KPIMR1_OFFSET);
+
+	writel(kp->kpemr, kp->base + KPEMR0_OFFSET);
+	writel(kp->kpemr, kp->base + KPEMR1_OFFSET);
+	writel(kp->kpemr, kp->base + KPEMR2_OFFSET);
+	writel(kp->kpemr, kp->base + KPEMR3_OFFSET);
+
+	writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET);
+	writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET);
+
+	kp->last_state[0] = readl(kp->base + KPSSR0_OFFSET);
+	kp->last_state[0] = readl(kp->base + KPSSR1_OFFSET);
+
+	writel(kp->kpcr | KPCR_ENABLE, kp->base + KPCR_OFFSET);
+
+	return 0;
+}
+
+static void bcm_kp_stop(const struct bcm_kp *kp)
+{
+	u32 val;
+
+	val = readl(kp->base + KPCR_OFFSET);
+	val &= ~KPCR_ENABLE;
+	writel(0, kp->base + KPCR_OFFSET);
+	writel(0, kp->base + KPIMR0_OFFSET);
+	writel(0, kp->base + KPIMR1_OFFSET);
+	writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET);
+	writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET);
+
+	if (kp->clk)
+		clk_disable_unprepare(kp->clk);
+}
+
+static int bcm_kp_open(struct input_dev *dev)
+{
+	struct bcm_kp *kp = input_get_drvdata(dev);
+
+	return bcm_kp_start(kp);
+}
+
+static void bcm_kp_close(struct input_dev *dev)
+{
+	struct bcm_kp *kp = input_get_drvdata(dev);
+
+	bcm_kp_stop(kp);
+}
+
+static int bcm_kp_matrix_key_parse_dt(struct bcm_kp *kp)
+{
+	struct device *dev = kp->input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	int error;
+	unsigned int dt_val;
+	unsigned int i;
+	unsigned int num_rows, col_mask, rows_set;
+
+	/* Initialize the KPCR Keypad Configuration Register */
+	kp->kpcr = KPCR_STATUSFILTERENABLE | KPCR_COLFILTERENABLE;
+
+	error = matrix_keypad_parse_properties(dev, &kp->n_rows, &kp->n_cols);
+	if (error) {
+		dev_err(dev, "failed to parse kp params\n");
+		return error;
+	}
+
+	/* Set row width for the ASIC block. */
+	kp->kpcr |= (kp->n_rows - 1) << KPCR_ROWWIDTH_SHIFT;
+
+	/* Set column width for the ASIC block. */
+	kp->kpcr |= (kp->n_cols - 1) << KPCR_COLUMNWIDTH_SHIFT;
+
+	/* Configure the IMR registers */
+
+	/*
+	 * IMR registers contain interrupt enable bits for 8x8 matrix
+	 * IMR0 register format: <row3> <row2> <row1> <row0>
+	 * IMR1 register format: <row7> <row6> <row5> <row4>
+	 */
+	col_mask = (1 << (kp->n_cols)) - 1;
+	num_rows = kp->n_rows;
+
+	/* Set column bits in rows 0 to 3 in IMR0 */
+	kp->imr0_val = col_mask;
+
+	rows_set = 1;
+	while (--num_rows && rows_set++ < 4)
+		kp->imr0_val |= kp->imr0_val << MAX_COLS;
+
+	/* Set column bits in rows 4 to 7 in IMR1 */
+	kp->imr1_val = 0;
+	if (num_rows) {
+		kp->imr1_val = col_mask;
+		while (--num_rows)
+			kp->imr1_val |= kp->imr1_val << MAX_COLS;
+	}
+
+	/* Initialize the KPEMR Keypress Edge Mode Registers */
+	/* Trigger on both edges */
+	kp->kpemr = 0;
+	for (i = 0; i <= 30; i += 2)
+		kp->kpemr |= (KPEMR_EDGETYPE_BOTH << i);
+
+	/*
+	 * Obtain the Status filter debounce value and verify against the
+	 * possible values specified in the DT binding.
+	 */
+	of_property_read_u32(np, "status-debounce-filter-period", &dt_val);
+
+	if (dt_val > KPCR_STATUSFILTERTYPE_MAX) {
+		dev_err(dev, "Invalid Status filter debounce value %d\n",
+			dt_val);
+		return -EINVAL;
+	}
+
+	kp->kpcr |= dt_val << KPCR_STATUSFILTERTYPE_SHIFT;
+
+	/*
+	 * Obtain the Column filter debounce value and verify against the
+	 * possible values specified in the DT binding.
+	 */
+	of_property_read_u32(np, "col-debounce-filter-period", &dt_val);
+
+	if (dt_val > KPCR_COLFILTERTYPE_MAX) {
+		dev_err(dev, "Invalid Column filter debounce value %d\n",
+			dt_val);
+		return -EINVAL;
+	}
+
+	kp->kpcr |= dt_val << KPCR_COLFILTERTYPE_SHIFT;
+
+	/*
+	 * Determine between the row and column,
+	 * which should be configured as output.
+	 */
+	if (of_property_read_bool(np, "row-output-enabled")) {
+		/*
+		* Set RowOContrl or ColumnOContrl in KPIOR
+		* to the number of pins to drive as outputs
+		*/
+		kp->kpior = ((1 << kp->n_rows) - 1) <<
+				KPIOR_ROWOCONTRL_SHIFT;
+	} else {
+		kp->kpior = ((1 << kp->n_cols) - 1) <<
+				KPIOR_COLUMNOCONTRL_SHIFT;
+	}
+
+	/*
+	 * Determine if the scan pull up needs to be enabled
+	 */
+	if (of_property_read_bool(np, "pull-up-enabled"))
+		kp->kpcr |= KPCR_MODE;
+
+	dev_dbg(dev, "n_rows=%d n_col=%d kpcr=%x kpior=%x kpemr=%x\n",
+		kp->n_rows, kp->n_cols,
+		kp->kpcr, kp->kpior, kp->kpemr);
+
+	return 0;
+}
+
+
+static int bcm_kp_probe(struct platform_device *pdev)
+{
+	struct bcm_kp *kp;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int error;
+
+	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+	if (!kp)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (of_property_read_bool(pdev->dev.of_node, "autorepeat"))
+		__set_bit(EV_REP, input_dev->evbit);
+
+	input_dev->name = pdev->name;
+	input_dev->phys = "keypad/input0";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = bcm_kp_open;
+	input_dev->close = bcm_kp_close;
+
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+
+	input_set_drvdata(input_dev, kp);
+
+	kp->input_dev = input_dev;
+
+	error = bcm_kp_matrix_key_parse_dt(kp);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   kp->n_rows, kp->n_cols,
+					   NULL, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		return error;
+	}
+
+	/* Get the KEYPAD base address */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing keypad base address resource\n");
+		return -ENODEV;
+	}
+
+	kp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kp->base))
+		return PTR_ERR(kp->base);
+
+	/* Enable clock */
+	kp->clk = devm_clk_get(&pdev->dev, "peri_clk");
+	if (IS_ERR(kp->clk)) {
+		error = PTR_ERR(kp->clk);
+		if (error != -ENOENT) {
+			if (error != -EPROBE_DEFER)
+				dev_err(&pdev->dev, "Failed to get clock\n");
+			return error;
+		}
+		dev_dbg(&pdev->dev,
+			"No clock specified. Assuming it's enabled\n");
+		kp->clk = NULL;
+	} else {
+		unsigned int desired_rate;
+		long actual_rate;
+
+		error = of_property_read_u32(pdev->dev.of_node,
+					     "clock-frequency", &desired_rate);
+		if (error < 0)
+			desired_rate = DEFAULT_CLK_HZ;
+
+		actual_rate = clk_round_rate(kp->clk, desired_rate);
+		if (actual_rate <= 0)
+			return -EINVAL;
+
+		error = clk_set_rate(kp->clk, actual_rate);
+		if (error)
+			return error;
+
+		error = clk_prepare_enable(kp->clk);
+		if (error)
+			return error;
+	}
+
+	/* Put the kp into a known sane state */
+	bcm_kp_stop(kp);
+
+	kp->irq = platform_get_irq(pdev, 0);
+	if (kp->irq < 0)
+		return -EINVAL;
+
+	error = devm_request_threaded_irq(&pdev->dev, kp->irq,
+					  NULL, bcm_kp_isr_thread,
+					  IRQF_ONESHOT, pdev->name, kp);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm_kp_of_match[] = {
+	{ .compatible = "brcm,bcm-keypad" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_kp_of_match);
+
+static struct platform_driver bcm_kp_device_driver = {
+	.probe		= bcm_kp_probe,
+	.driver		= {
+		.name	= "bcm-keypad",
+		.of_match_table = of_match_ptr(bcm_kp_of_match),
+	}
+};
+
+module_platform_driver(bcm_kp_device_driver);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("BCM Keypad Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
new file mode 100644
index 000000000..688e2bef6
--- /dev/null
+++ b/drivers/input/keyboard/cap11xx.c
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Input driver for Microchip CAP11xx based capacitive touch sensors
+ *
+ * (c) 2014 Daniel Mack <linux@zonque.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+
+#define CAP11XX_REG_MAIN_CONTROL	0x00
+#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT	(6)
+#define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK	(0xc0)
+#define CAP11XX_REG_MAIN_CONTROL_DLSEEP		BIT(4)
+#define CAP11XX_REG_GENERAL_STATUS	0x02
+#define CAP11XX_REG_SENSOR_INPUT	0x03
+#define CAP11XX_REG_NOISE_FLAG_STATUS	0x0a
+#define CAP11XX_REG_SENOR_DELTA(X)	(0x10 + (X))
+#define CAP11XX_REG_SENSITIVITY_CONTROL	0x1f
+#define CAP11XX_REG_CONFIG		0x20
+#define CAP11XX_REG_SENSOR_ENABLE	0x21
+#define CAP11XX_REG_SENSOR_CONFIG	0x22
+#define CAP11XX_REG_SENSOR_CONFIG2	0x23
+#define CAP11XX_REG_SAMPLING_CONFIG	0x24
+#define CAP11XX_REG_CALIBRATION		0x26
+#define CAP11XX_REG_INT_ENABLE		0x27
+#define CAP11XX_REG_REPEAT_RATE		0x28
+#define CAP11XX_REG_MT_CONFIG		0x2a
+#define CAP11XX_REG_MT_PATTERN_CONFIG	0x2b
+#define CAP11XX_REG_MT_PATTERN		0x2d
+#define CAP11XX_REG_RECALIB_CONFIG	0x2f
+#define CAP11XX_REG_SENSOR_THRESH(X)	(0x30 + (X))
+#define CAP11XX_REG_SENSOR_NOISE_THRESH	0x38
+#define CAP11XX_REG_STANDBY_CHANNEL	0x40
+#define CAP11XX_REG_STANDBY_CONFIG	0x41
+#define CAP11XX_REG_STANDBY_SENSITIVITY	0x42
+#define CAP11XX_REG_STANDBY_THRESH	0x43
+#define CAP11XX_REG_CONFIG2		0x44
+#define CAP11XX_REG_CONFIG2_ALT_POL	BIT(6)
+#define CAP11XX_REG_SENSOR_BASE_CNT(X)	(0x50 + (X))
+#define CAP11XX_REG_LED_POLARITY	0x73
+#define CAP11XX_REG_LED_OUTPUT_CONTROL	0x74
+
+#define CAP11XX_REG_LED_DUTY_CYCLE_1	0x90
+#define CAP11XX_REG_LED_DUTY_CYCLE_2	0x91
+#define CAP11XX_REG_LED_DUTY_CYCLE_3	0x92
+#define CAP11XX_REG_LED_DUTY_CYCLE_4	0x93
+
+#define CAP11XX_REG_LED_DUTY_MIN_MASK	(0x0f)
+#define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT	(0)
+#define CAP11XX_REG_LED_DUTY_MAX_MASK	(0xf0)
+#define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT	(4)
+#define CAP11XX_REG_LED_DUTY_MAX_VALUE	(15)
+
+#define CAP11XX_REG_SENSOR_CALIB	(0xb1 + (X))
+#define CAP11XX_REG_SENSOR_CALIB_LSB1	0xb9
+#define CAP11XX_REG_SENSOR_CALIB_LSB2	0xba
+#define CAP11XX_REG_PRODUCT_ID		0xfd
+#define CAP11XX_REG_MANUFACTURER_ID	0xfe
+#define CAP11XX_REG_REVISION		0xff
+
+#define CAP11XX_MANUFACTURER_ID	0x5d
+
+#ifdef CONFIG_LEDS_CLASS
+struct cap11xx_led {
+	struct cap11xx_priv *priv;
+	struct led_classdev cdev;
+	u32 reg;
+};
+#endif
+
+struct cap11xx_priv {
+	struct regmap *regmap;
+	struct input_dev *idev;
+
+	struct cap11xx_led *leds;
+	int num_leds;
+
+	/* config */
+	u32 keycodes[];
+};
+
+struct cap11xx_hw_model {
+	u8 product_id;
+	unsigned int num_channels;
+	unsigned int num_leds;
+};
+
+enum {
+	CAP1106,
+	CAP1126,
+	CAP1188,
+};
+
+static const struct cap11xx_hw_model cap11xx_devices[] = {
+	[CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds = 0 },
+	[CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds = 2 },
+	[CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds = 8 },
+};
+
+static const struct reg_default cap11xx_reg_defaults[] = {
+	{ CAP11XX_REG_MAIN_CONTROL,		0x00 },
+	{ CAP11XX_REG_GENERAL_STATUS,		0x00 },
+	{ CAP11XX_REG_SENSOR_INPUT,		0x00 },
+	{ CAP11XX_REG_NOISE_FLAG_STATUS,	0x00 },
+	{ CAP11XX_REG_SENSITIVITY_CONTROL,	0x2f },
+	{ CAP11XX_REG_CONFIG,			0x20 },
+	{ CAP11XX_REG_SENSOR_ENABLE,		0x3f },
+	{ CAP11XX_REG_SENSOR_CONFIG,		0xa4 },
+	{ CAP11XX_REG_SENSOR_CONFIG2,		0x07 },
+	{ CAP11XX_REG_SAMPLING_CONFIG,		0x39 },
+	{ CAP11XX_REG_CALIBRATION,		0x00 },
+	{ CAP11XX_REG_INT_ENABLE,		0x3f },
+	{ CAP11XX_REG_REPEAT_RATE,		0x3f },
+	{ CAP11XX_REG_MT_CONFIG,		0x80 },
+	{ CAP11XX_REG_MT_PATTERN_CONFIG,	0x00 },
+	{ CAP11XX_REG_MT_PATTERN,		0x3f },
+	{ CAP11XX_REG_RECALIB_CONFIG,		0x8a },
+	{ CAP11XX_REG_SENSOR_THRESH(0),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(1),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(2),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(3),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(4),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(5),		0x40 },
+	{ CAP11XX_REG_SENSOR_NOISE_THRESH,	0x01 },
+	{ CAP11XX_REG_STANDBY_CHANNEL,		0x00 },
+	{ CAP11XX_REG_STANDBY_CONFIG,		0x39 },
+	{ CAP11XX_REG_STANDBY_SENSITIVITY,	0x02 },
+	{ CAP11XX_REG_STANDBY_THRESH,		0x40 },
+	{ CAP11XX_REG_CONFIG2,			0x40 },
+	{ CAP11XX_REG_LED_POLARITY,		0x00 },
+	{ CAP11XX_REG_SENSOR_CALIB_LSB1,	0x00 },
+	{ CAP11XX_REG_SENSOR_CALIB_LSB2,	0x00 },
+};
+
+static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case CAP11XX_REG_MAIN_CONTROL:
+	case CAP11XX_REG_SENSOR_INPUT:
+	case CAP11XX_REG_SENOR_DELTA(0):
+	case CAP11XX_REG_SENOR_DELTA(1):
+	case CAP11XX_REG_SENOR_DELTA(2):
+	case CAP11XX_REG_SENOR_DELTA(3):
+	case CAP11XX_REG_SENOR_DELTA(4):
+	case CAP11XX_REG_SENOR_DELTA(5):
+	case CAP11XX_REG_PRODUCT_ID:
+	case CAP11XX_REG_MANUFACTURER_ID:
+	case CAP11XX_REG_REVISION:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config cap11xx_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = CAP11XX_REG_REVISION,
+	.reg_defaults = cap11xx_reg_defaults,
+
+	.num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults),
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = cap11xx_volatile_reg,
+};
+
+static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
+{
+	struct cap11xx_priv *priv = data;
+	unsigned int status;
+	int ret, i;
+
+	/*
+	 * Deassert interrupt. This needs to be done before reading the status
+	 * registers, which will not carry valid values otherwise.
+	 */
+	ret = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, 1, 0);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_read(priv->regmap, CAP11XX_REG_SENSOR_INPUT, &status);
+	if (ret < 0)
+		goto out;
+
+	for (i = 0; i < priv->idev->keycodemax; i++)
+		input_report_key(priv->idev, priv->keycodes[i],
+				 status & (1 << i));
+
+	input_sync(priv->idev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep)
+{
+	/*
+	 * DLSEEP mode will turn off all LEDS, prevent this
+	 */
+	if (IS_ENABLED(CONFIG_LEDS_CLASS) && priv->num_leds)
+		return 0;
+
+	return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
+				  CAP11XX_REG_MAIN_CONTROL_DLSEEP,
+				  sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0);
+}
+
+static int cap11xx_input_open(struct input_dev *idev)
+{
+	struct cap11xx_priv *priv = input_get_drvdata(idev);
+
+	return cap11xx_set_sleep(priv, false);
+}
+
+static void cap11xx_input_close(struct input_dev *idev)
+{
+	struct cap11xx_priv *priv = input_get_drvdata(idev);
+
+	cap11xx_set_sleep(priv, true);
+}
+
+#ifdef CONFIG_LEDS_CLASS
+static int cap11xx_led_set(struct led_classdev *cdev,
+			    enum led_brightness value)
+{
+	struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
+	struct cap11xx_priv *priv = led->priv;
+
+	/*
+	 * All LEDs share the same duty cycle as this is a HW
+	 * limitation. Brightness levels per LED are either
+	 * 0 (OFF) and 1 (ON).
+	 */
+	return regmap_update_bits(priv->regmap,
+				  CAP11XX_REG_LED_OUTPUT_CONTROL,
+				  BIT(led->reg),
+				  value ? BIT(led->reg) : 0);
+}
+
+static int cap11xx_init_leds(struct device *dev,
+			     struct cap11xx_priv *priv, int num_leds)
+{
+	struct device_node *node = dev->of_node, *child;
+	struct cap11xx_led *led;
+	int cnt = of_get_child_count(node);
+	int error;
+
+	if (!num_leds || !cnt)
+		return 0;
+
+	if (cnt > num_leds)
+		return -EINVAL;
+
+	led = devm_kcalloc(dev, cnt, sizeof(struct cap11xx_led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	priv->leds = led;
+
+	error = regmap_update_bits(priv->regmap,
+				CAP11XX_REG_LED_OUTPUT_CONTROL, 0xff, 0);
+	if (error)
+		return error;
+
+	error = regmap_update_bits(priv->regmap, CAP11XX_REG_LED_DUTY_CYCLE_4,
+				CAP11XX_REG_LED_DUTY_MAX_MASK,
+				CAP11XX_REG_LED_DUTY_MAX_VALUE <<
+				CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT);
+	if (error)
+		return error;
+
+	for_each_child_of_node(node, child) {
+		u32 reg;
+
+		led->cdev.name =
+			of_get_property(child, "label", NULL) ? : child->name;
+		led->cdev.default_trigger =
+			of_get_property(child, "linux,default-trigger", NULL);
+		led->cdev.flags = 0;
+		led->cdev.brightness_set_blocking = cap11xx_led_set;
+		led->cdev.max_brightness = 1;
+		led->cdev.brightness = LED_OFF;
+
+		error = of_property_read_u32(child, "reg", &reg);
+		if (error != 0 || reg >= num_leds) {
+			of_node_put(child);
+			return -EINVAL;
+		}
+
+		led->reg = reg;
+		led->priv = priv;
+
+		error = devm_led_classdev_register(dev, &led->cdev);
+		if (error) {
+			of_node_put(child);
+			return error;
+		}
+
+		priv->num_leds++;
+		led++;
+	}
+
+	return 0;
+}
+#else
+static int cap11xx_init_leds(struct device *dev,
+			     struct cap11xx_priv *priv, int num_leds)
+{
+	return 0;
+}
+#endif
+
+static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
+			     const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c_client->dev;
+	struct cap11xx_priv *priv;
+	struct device_node *node;
+	const struct cap11xx_hw_model *cap;
+	int i, error, irq, gain = 0;
+	unsigned int val, rev;
+	u32 gain32;
+
+	if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) {
+		dev_err(dev, "Invalid device ID %lu\n", id->driver_data);
+		return -EINVAL;
+	}
+
+	cap = &cap11xx_devices[id->driver_data];
+	if (!cap || !cap->num_channels) {
+		dev_err(dev, "Invalid device configuration\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(dev,
+			    struct_size(priv, keycodes, cap->num_channels),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	error = regmap_read(priv->regmap, CAP11XX_REG_PRODUCT_ID, &val);
+	if (error)
+		return error;
+
+	if (val != cap->product_id) {
+		dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
+			val, cap->product_id);
+		return -ENXIO;
+	}
+
+	error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val);
+	if (error)
+		return error;
+
+	if (val != CAP11XX_MANUFACTURER_ID) {
+		dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
+			val, CAP11XX_MANUFACTURER_ID);
+		return -ENXIO;
+	}
+
+	error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev);
+	if (error < 0)
+		return error;
+
+	dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev);
+	node = dev->of_node;
+
+	if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
+		if (is_power_of_2(gain32) && gain32 <= 8)
+			gain = ilog2(gain32);
+		else
+			dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
+	}
+
+	if (of_property_read_bool(node, "microchip,irq-active-high")) {
+		error = regmap_update_bits(priv->regmap, CAP11XX_REG_CONFIG2,
+					   CAP11XX_REG_CONFIG2_ALT_POL, 0);
+		if (error)
+			return error;
+	}
+
+	/* Provide some useful defaults */
+	for (i = 0; i < cap->num_channels; i++)
+		priv->keycodes[i] = KEY_A + i;
+
+	of_property_read_u32_array(node, "linux,keycodes",
+				   priv->keycodes, cap->num_channels);
+
+	error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
+				   CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
+				   gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
+	if (error)
+		return error;
+
+	/* Disable autorepeat. The Linux input system has its own handling. */
+	error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
+	if (error)
+		return error;
+
+	priv->idev = devm_input_allocate_device(dev);
+	if (!priv->idev)
+		return -ENOMEM;
+
+	priv->idev->name = "CAP11XX capacitive touch sensor";
+	priv->idev->id.bustype = BUS_I2C;
+	priv->idev->evbit[0] = BIT_MASK(EV_KEY);
+
+	if (of_property_read_bool(node, "autorepeat"))
+		__set_bit(EV_REP, priv->idev->evbit);
+
+	for (i = 0; i < cap->num_channels; i++)
+		__set_bit(priv->keycodes[i], priv->idev->keybit);
+
+	__clear_bit(KEY_RESERVED, priv->idev->keybit);
+
+	priv->idev->keycode = priv->keycodes;
+	priv->idev->keycodesize = sizeof(priv->keycodes[0]);
+	priv->idev->keycodemax = cap->num_channels;
+
+	priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID;
+	priv->idev->id.product = cap->product_id;
+	priv->idev->id.version = rev;
+
+	priv->idev->open = cap11xx_input_open;
+	priv->idev->close = cap11xx_input_close;
+
+	error = cap11xx_init_leds(dev, priv, cap->num_leds);
+	if (error)
+		return error;
+
+	input_set_drvdata(priv->idev, priv);
+
+	/*
+	 * Put the device in deep sleep mode for now.
+	 * ->open() will bring it back once the it is actually needed.
+	 */
+	cap11xx_set_sleep(priv, true);
+
+	error = input_register_device(priv->idev);
+	if (error)
+		return error;
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq) {
+		dev_err(dev, "Unable to parse or map IRQ\n");
+		return -ENXIO;
+	}
+
+	error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func,
+					  IRQF_ONESHOT, dev_name(dev), priv);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct of_device_id cap11xx_dt_ids[] = {
+	{ .compatible = "microchip,cap1106", },
+	{ .compatible = "microchip,cap1126", },
+	{ .compatible = "microchip,cap1188", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
+
+static const struct i2c_device_id cap11xx_i2c_ids[] = {
+	{ "cap1106", CAP1106 },
+	{ "cap1126", CAP1126 },
+	{ "cap1188", CAP1188 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);
+
+static struct i2c_driver cap11xx_i2c_driver = {
+	.driver = {
+		.name	= "cap11xx",
+		.of_match_table = cap11xx_dt_ids,
+	},
+	.id_table	= cap11xx_i2c_ids,
+	.probe		= cap11xx_i2c_probe,
+};
+
+module_i2c_driver(cap11xx_i2c_driver);
+
+MODULE_DESCRIPTION("Microchip CAP11XX driver");
+MODULE_AUTHOR("Daniel Mack <linux@zonque.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/clps711x-keypad.c b/drivers/input/keyboard/clps711x-keypad.c
new file mode 100644
index 000000000..019dd6ed2
--- /dev/null
+++ b/drivers/input/keyboard/clps711x-keypad.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Cirrus Logic CLPS711X Keypad driver
+ *
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sched.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/clps711x.h>
+
+#define CLPS711X_KEYPAD_COL_COUNT	8
+
+struct clps711x_gpio_data {
+	struct gpio_desc *desc;
+	DECLARE_BITMAP(last_state, CLPS711X_KEYPAD_COL_COUNT);
+};
+
+struct clps711x_keypad_data {
+	struct regmap			*syscon;
+	int				row_count;
+	unsigned int			row_shift;
+	struct clps711x_gpio_data	*gpio_data;
+};
+
+static void clps711x_keypad_poll(struct input_dev *input)
+{
+	const unsigned short *keycodes = input->keycode;
+	struct clps711x_keypad_data *priv = input_get_drvdata(input);
+	bool sync = false;
+	int col, row;
+
+	for (col = 0; col < CLPS711X_KEYPAD_COL_COUNT; col++) {
+		/* Assert column */
+		regmap_update_bits(priv->syscon, SYSCON_OFFSET,
+				   SYSCON1_KBDSCAN_MASK,
+				   SYSCON1_KBDSCAN(8 + col));
+
+		/* Scan rows */
+		for (row = 0; row < priv->row_count; row++) {
+			struct clps711x_gpio_data *data = &priv->gpio_data[row];
+			bool state, state1;
+
+			/* Read twice for protection against fluctuations */
+			do {
+				state = gpiod_get_value_cansleep(data->desc);
+				cond_resched();
+				state1 = gpiod_get_value_cansleep(data->desc);
+			} while (state != state1);
+
+			if (test_bit(col, data->last_state) != state) {
+				int code = MATRIX_SCAN_CODE(row, col,
+							    priv->row_shift);
+
+				if (state) {
+					set_bit(col, data->last_state);
+					input_event(input,
+						    EV_MSC, MSC_SCAN, code);
+				} else {
+					clear_bit(col, data->last_state);
+				}
+
+				if (keycodes[code])
+					input_report_key(input,
+							 keycodes[code], state);
+				sync = true;
+			}
+		}
+
+		/* Set all columns to low */
+		regmap_update_bits(priv->syscon, SYSCON_OFFSET,
+				   SYSCON1_KBDSCAN_MASK, SYSCON1_KBDSCAN(1));
+	}
+
+	if (sync)
+		input_sync(input);
+}
+
+static int clps711x_keypad_probe(struct platform_device *pdev)
+{
+	struct clps711x_keypad_data *priv;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct input_dev *input;
+	u32 poll_interval;
+	int i, err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->syscon =
+		syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon1");
+	if (IS_ERR(priv->syscon))
+		return PTR_ERR(priv->syscon);
+
+	priv->row_count = of_gpio_named_count(np, "row-gpios");
+	if (priv->row_count < 1)
+		return -EINVAL;
+
+	priv->gpio_data = devm_kcalloc(dev,
+				priv->row_count, sizeof(*priv->gpio_data),
+				GFP_KERNEL);
+	if (!priv->gpio_data)
+		return -ENOMEM;
+
+	priv->row_shift = get_count_order(CLPS711X_KEYPAD_COL_COUNT);
+
+	for (i = 0; i < priv->row_count; i++) {
+		struct clps711x_gpio_data *data = &priv->gpio_data[i];
+
+		data->desc = devm_gpiod_get_index(dev, "row", i, GPIOD_IN);
+		if (IS_ERR(data->desc))
+			return PTR_ERR(data->desc);
+	}
+
+	err = of_property_read_u32(np, "poll-interval", &poll_interval);
+	if (err)
+		return err;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input_set_drvdata(input, priv);
+
+	input->name		= pdev->name;
+	input->dev.parent	= dev;
+	input->id.bustype	= BUS_HOST;
+	input->id.vendor	= 0x0001;
+	input->id.product	= 0x0001;
+	input->id.version	= 0x0100;
+
+	err = matrix_keypad_build_keymap(NULL, NULL, priv->row_count,
+					 CLPS711X_KEYPAD_COL_COUNT,
+					 NULL, input);
+	if (err)
+		return err;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	if (of_property_read_bool(np, "autorepeat"))
+		__set_bit(EV_REP, input->evbit);
+
+	/* Set all columns to low */
+	regmap_update_bits(priv->syscon, SYSCON_OFFSET, SYSCON1_KBDSCAN_MASK,
+			   SYSCON1_KBDSCAN(1));
+
+
+	err = input_setup_polling(input, clps711x_keypad_poll);
+	if (err)
+		return err;
+
+	input_set_poll_interval(input, poll_interval);
+
+	err = input_register_device(input);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct of_device_id clps711x_keypad_of_match[] = {
+	{ .compatible = "cirrus,ep7209-keypad", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clps711x_keypad_of_match);
+
+static struct platform_driver clps711x_keypad_driver = {
+	.driver	= {
+		.name		= "clps711x-keypad",
+		.of_match_table	= clps711x_keypad_of_match,
+	},
+	.probe	= clps711x_keypad_probe,
+};
+module_platform_driver(clps711x_keypad_driver);
+
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("Cirrus Logic CLPS711X Keypad driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
new file mode 100644
index 000000000..1f0d61b3c
--- /dev/null
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -0,0 +1,665 @@
+// SPDX-License-Identifier: GPL-2.0
+// ChromeOS EC keyboard driver
+//
+// Copyright (C) 2012 Google, Inc.
+//
+// This driver uses the ChromeOS EC byte-level message-based protocol for
+// communicating the keyboard state (which keys are pressed) from a keyboard EC
+// to the AP over some bus (such as i2c, lpc, spi).  The EC does debouncing,
+// but everything else (including deghosting) is done here.  The main
+// motivation for this is to keep the EC firmware as simple as possible, since
+// it cannot be easily upgraded and EC flash/IRAM space is relatively
+// expensive.
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sysrq.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+
+#include <asm/unaligned.h>
+
+/*
+ * @rows: Number of rows in the keypad
+ * @cols: Number of columns in the keypad
+ * @row_shift: log2 or number of rows, rounded up
+ * @keymap_data: Matrix keymap data used to convert to keyscan values
+ * @ghost_filter: true to enable the matrix key-ghosting filter
+ * @valid_keys: bitmap of existing keys for each matrix column
+ * @old_kb_state: bitmap of keys pressed last scan
+ * @dev: Device pointer
+ * @ec: Top level ChromeOS device to use to talk to EC
+ * @idev: The input device for the matrix keys.
+ * @bs_idev: The input device for non-matrix buttons and switches (or NULL).
+ * @notifier: interrupt event notifier for transport devices
+ */
+struct cros_ec_keyb {
+	unsigned int rows;
+	unsigned int cols;
+	int row_shift;
+	const struct matrix_keymap_data *keymap_data;
+	bool ghost_filter;
+	uint8_t *valid_keys;
+	uint8_t *old_kb_state;
+
+	struct device *dev;
+	struct cros_ec_device *ec;
+
+	struct input_dev *idev;
+	struct input_dev *bs_idev;
+	struct notifier_block notifier;
+};
+
+
+/**
+ * cros_ec_bs_map - Struct mapping Linux keycodes to EC button/switch bitmap
+ * #defines
+ *
+ * @ev_type: The type of the input event to generate (e.g., EV_KEY).
+ * @code: A linux keycode
+ * @bit: A #define like EC_MKBP_POWER_BUTTON or EC_MKBP_LID_OPEN
+ * @inverted: If the #define and EV_SW have opposite meanings, this is true.
+ *            Only applicable to switches.
+ */
+struct cros_ec_bs_map {
+	unsigned int ev_type;
+	unsigned int code;
+	u8 bit;
+	bool inverted;
+};
+
+/* cros_ec_keyb_bs - Map EC button/switch #defines into kernel ones */
+static const struct cros_ec_bs_map cros_ec_keyb_bs[] = {
+	/* Buttons */
+	{
+		.ev_type	= EV_KEY,
+		.code		= KEY_POWER,
+		.bit		= EC_MKBP_POWER_BUTTON,
+	},
+	{
+		.ev_type	= EV_KEY,
+		.code		= KEY_VOLUMEUP,
+		.bit		= EC_MKBP_VOL_UP,
+	},
+	{
+		.ev_type	= EV_KEY,
+		.code		= KEY_VOLUMEDOWN,
+		.bit		= EC_MKBP_VOL_DOWN,
+	},
+
+	/* Switches */
+	{
+		.ev_type	= EV_SW,
+		.code		= SW_LID,
+		.bit		= EC_MKBP_LID_OPEN,
+		.inverted	= true,
+	},
+	{
+		.ev_type	= EV_SW,
+		.code		= SW_TABLET_MODE,
+		.bit		= EC_MKBP_TABLET_MODE,
+	},
+};
+
+/*
+ * Returns true when there is at least one combination of pressed keys that
+ * results in ghosting.
+ */
+static bool cros_ec_keyb_has_ghosting(struct cros_ec_keyb *ckdev, uint8_t *buf)
+{
+	int col1, col2, buf1, buf2;
+	struct device *dev = ckdev->dev;
+	uint8_t *valid_keys = ckdev->valid_keys;
+
+	/*
+	 * Ghosting happens if for any pressed key X there are other keys
+	 * pressed both in the same row and column of X as, for instance,
+	 * in the following diagram:
+	 *
+	 * . . Y . g .
+	 * . . . . . .
+	 * . . . . . .
+	 * . . X . Z .
+	 *
+	 * In this case only X, Y, and Z are pressed, but g appears to be
+	 * pressed too (see Wikipedia).
+	 */
+	for (col1 = 0; col1 < ckdev->cols; col1++) {
+		buf1 = buf[col1] & valid_keys[col1];
+		for (col2 = col1 + 1; col2 < ckdev->cols; col2++) {
+			buf2 = buf[col2] & valid_keys[col2];
+			if (hweight8(buf1 & buf2) > 1) {
+				dev_dbg(dev, "ghost found at: B[%02d]:0x%02x & B[%02d]:0x%02x",
+					col1, buf1, col2, buf2);
+				return true;
+			}
+		}
+	}
+
+	return false;
+}
+
+
+/*
+ * Compares the new keyboard state to the old one and produces key
+ * press/release events accordingly.  The keyboard state is 13 bytes (one byte
+ * per column)
+ */
+static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev,
+			 uint8_t *kb_state, int len)
+{
+	struct input_dev *idev = ckdev->idev;
+	int col, row;
+	int new_state;
+	int old_state;
+
+	if (ckdev->ghost_filter && cros_ec_keyb_has_ghosting(ckdev, kb_state)) {
+		/*
+		 * Simple-minded solution: ignore this state. The obvious
+		 * improvement is to only ignore changes to keys involved in
+		 * the ghosting, but process the other changes.
+		 */
+		dev_dbg(ckdev->dev, "ghosting found\n");
+		return;
+	}
+
+	for (col = 0; col < ckdev->cols; col++) {
+		for (row = 0; row < ckdev->rows; row++) {
+			int pos = MATRIX_SCAN_CODE(row, col, ckdev->row_shift);
+			const unsigned short *keycodes = idev->keycode;
+
+			new_state = kb_state[col] & (1 << row);
+			old_state = ckdev->old_kb_state[col] & (1 << row);
+			if (new_state != old_state) {
+				dev_dbg(ckdev->dev,
+					"changed: [r%d c%d]: byte %02x\n",
+					row, col, new_state);
+
+				input_event(idev, EV_MSC, MSC_SCAN, pos);
+				input_report_key(idev, keycodes[pos],
+						 new_state);
+			}
+		}
+		ckdev->old_kb_state[col] = kb_state[col];
+	}
+	input_sync(ckdev->idev);
+}
+
+/**
+ * cros_ec_keyb_report_bs - Report non-matrixed buttons or switches
+ *
+ * This takes a bitmap of buttons or switches from the EC and reports events,
+ * syncing at the end.
+ *
+ * @ckdev: The keyboard device.
+ * @ev_type: The input event type (e.g., EV_KEY).
+ * @mask: A bitmap of buttons from the EC.
+ */
+static void cros_ec_keyb_report_bs(struct cros_ec_keyb *ckdev,
+				   unsigned int ev_type, u32 mask)
+
+{
+	struct input_dev *idev = ckdev->bs_idev;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cros_ec_keyb_bs); i++) {
+		const struct cros_ec_bs_map *map = &cros_ec_keyb_bs[i];
+
+		if (map->ev_type != ev_type)
+			continue;
+
+		input_event(idev, ev_type, map->code,
+			    !!(mask & BIT(map->bit)) ^ map->inverted);
+	}
+	input_sync(idev);
+}
+
+static int cros_ec_keyb_work(struct notifier_block *nb,
+			     unsigned long queued_during_suspend, void *_notify)
+{
+	struct cros_ec_keyb *ckdev = container_of(nb, struct cros_ec_keyb,
+						  notifier);
+	u32 val;
+	unsigned int ev_type;
+
+	/*
+	 * If not wake enabled, discard key state changes during
+	 * suspend. Switches will be re-checked in
+	 * cros_ec_keyb_resume() to be sure nothing is lost.
+	 */
+	if (queued_during_suspend && !device_may_wakeup(ckdev->dev))
+		return NOTIFY_OK;
+
+	switch (ckdev->ec->event_data.event_type) {
+	case EC_MKBP_EVENT_KEY_MATRIX:
+		pm_wakeup_event(ckdev->dev, 0);
+
+		if (ckdev->ec->event_size != ckdev->cols) {
+			dev_err(ckdev->dev,
+				"Discarded incomplete key matrix event.\n");
+			return NOTIFY_OK;
+		}
+
+		cros_ec_keyb_process(ckdev,
+				     ckdev->ec->event_data.data.key_matrix,
+				     ckdev->ec->event_size);
+		break;
+
+	case EC_MKBP_EVENT_SYSRQ:
+		pm_wakeup_event(ckdev->dev, 0);
+
+		val = get_unaligned_le32(&ckdev->ec->event_data.data.sysrq);
+		dev_dbg(ckdev->dev, "sysrq code from EC: %#x\n", val);
+		handle_sysrq(val);
+		break;
+
+	case EC_MKBP_EVENT_BUTTON:
+	case EC_MKBP_EVENT_SWITCH:
+		pm_wakeup_event(ckdev->dev, 0);
+
+		if (ckdev->ec->event_data.event_type == EC_MKBP_EVENT_BUTTON) {
+			val = get_unaligned_le32(
+					&ckdev->ec->event_data.data.buttons);
+			ev_type = EV_KEY;
+		} else {
+			val = get_unaligned_le32(
+					&ckdev->ec->event_data.data.switches);
+			ev_type = EV_SW;
+		}
+		cros_ec_keyb_report_bs(ckdev, ev_type, val);
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+/*
+ * Walks keycodes flipping bit in buffer COLUMNS deep where bit is ROW.  Used by
+ * ghosting logic to ignore NULL or virtual keys.
+ */
+static void cros_ec_keyb_compute_valid_keys(struct cros_ec_keyb *ckdev)
+{
+	int row, col;
+	int row_shift = ckdev->row_shift;
+	unsigned short *keymap = ckdev->idev->keycode;
+	unsigned short code;
+
+	BUG_ON(ckdev->idev->keycodesize != sizeof(*keymap));
+
+	for (col = 0; col < ckdev->cols; col++) {
+		for (row = 0; row < ckdev->rows; row++) {
+			code = keymap[MATRIX_SCAN_CODE(row, col, row_shift)];
+			if (code && (code != KEY_BATTERY))
+				ckdev->valid_keys[col] |= 1 << row;
+		}
+		dev_dbg(ckdev->dev, "valid_keys[%02d] = 0x%02x\n",
+			col, ckdev->valid_keys[col]);
+	}
+}
+
+/**
+ * cros_ec_keyb_info - Wrap the EC command EC_CMD_MKBP_INFO
+ *
+ * This wraps the EC_CMD_MKBP_INFO, abstracting out all of the marshalling and
+ * unmarshalling and different version nonsense into something simple.
+ *
+ * @ec_dev: The EC device
+ * @info_type: Either EC_MKBP_INFO_SUPPORTED or EC_MKBP_INFO_CURRENT.
+ * @event_type: Either EC_MKBP_EVENT_BUTTON or EC_MKBP_EVENT_SWITCH.  Actually
+ *              in some cases this could be EC_MKBP_EVENT_KEY_MATRIX or
+ *              EC_MKBP_EVENT_HOST_EVENT too but we don't use in this driver.
+ * @result: Where we'll store the result; a union
+ * @result_size: The size of the result.  Expected to be the size of one of
+ *               the elements in the union.
+ *
+ * Returns 0 if no error or -error upon error.
+ */
+static int cros_ec_keyb_info(struct cros_ec_device *ec_dev,
+			     enum ec_mkbp_info_type info_type,
+			     enum ec_mkbp_event event_type,
+			     union ec_response_get_next_data *result,
+			     size_t result_size)
+{
+	struct ec_params_mkbp_info *params;
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = kzalloc(sizeof(*msg) + max_t(size_t, result_size,
+					   sizeof(*params)), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->command = EC_CMD_MKBP_INFO;
+	msg->version = 1;
+	msg->outsize = sizeof(*params);
+	msg->insize = result_size;
+	params = (struct ec_params_mkbp_info *)msg->data;
+	params->info_type = info_type;
+	params->event_type = event_type;
+
+	ret = cros_ec_cmd_xfer_status(ec_dev, msg);
+	if (ret == -ENOPROTOOPT) {
+		/* With older ECs we just return 0 for everything */
+		memset(result, 0, result_size);
+		ret = 0;
+	} else if (ret < 0) {
+		dev_warn(ec_dev->dev, "Transfer error %d/%d: %d\n",
+			 (int)info_type, (int)event_type, ret);
+	} else if (ret != result_size) {
+		dev_warn(ec_dev->dev, "Wrong size %d/%d: %d != %zu\n",
+			 (int)info_type, (int)event_type,
+			 ret, result_size);
+		ret = -EPROTO;
+	} else {
+		memcpy(result, msg->data, result_size);
+		ret = 0;
+	}
+
+	kfree(msg);
+
+	return ret;
+}
+
+/**
+ * cros_ec_keyb_query_switches - Query the state of switches and report
+ *
+ * This will ask the EC about the current state of switches and report to the
+ * kernel.  Note that we don't query for buttons because they are more
+ * transitory and we'll get an update on the next release / press.
+ *
+ * @ckdev: The keyboard device
+ *
+ * Returns 0 if no error or -error upon error.
+ */
+static int cros_ec_keyb_query_switches(struct cros_ec_keyb *ckdev)
+{
+	struct cros_ec_device *ec_dev = ckdev->ec;
+	union ec_response_get_next_data event_data = {};
+	int ret;
+
+	ret = cros_ec_keyb_info(ec_dev, EC_MKBP_INFO_CURRENT,
+				EC_MKBP_EVENT_SWITCH, &event_data,
+				sizeof(event_data.switches));
+	if (ret)
+		return ret;
+
+	cros_ec_keyb_report_bs(ckdev, EV_SW,
+			       get_unaligned_le32(&event_data.switches));
+
+	return 0;
+}
+
+/**
+ * cros_ec_keyb_resume - Resume the keyboard
+ *
+ * We use the resume notification as a chance to query the EC for switches.
+ *
+ * @dev: The keyboard device
+ *
+ * Returns 0 if no error or -error upon error.
+ */
+static __maybe_unused int cros_ec_keyb_resume(struct device *dev)
+{
+	struct cros_ec_keyb *ckdev = dev_get_drvdata(dev);
+
+	if (ckdev->bs_idev)
+		return cros_ec_keyb_query_switches(ckdev);
+
+	return 0;
+}
+
+/**
+ * cros_ec_keyb_register_bs - Register non-matrix buttons/switches
+ *
+ * Handles all the bits of the keyboard driver related to non-matrix buttons
+ * and switches, including asking the EC about which are present and telling
+ * the kernel to expect them.
+ *
+ * If this device has no support for buttons and switches we'll return no error
+ * but the ckdev->bs_idev will remain NULL when this function exits.
+ *
+ * @ckdev: The keyboard device
+ *
+ * Returns 0 if no error or -error upon error.
+ */
+static int cros_ec_keyb_register_bs(struct cros_ec_keyb *ckdev)
+{
+	struct cros_ec_device *ec_dev = ckdev->ec;
+	struct device *dev = ckdev->dev;
+	struct input_dev *idev;
+	union ec_response_get_next_data event_data = {};
+	const char *phys;
+	u32 buttons;
+	u32 switches;
+	int ret;
+	int i;
+
+	ret = cros_ec_keyb_info(ec_dev, EC_MKBP_INFO_SUPPORTED,
+				EC_MKBP_EVENT_BUTTON, &event_data,
+				sizeof(event_data.buttons));
+	if (ret)
+		return ret;
+	buttons = get_unaligned_le32(&event_data.buttons);
+
+	ret = cros_ec_keyb_info(ec_dev, EC_MKBP_INFO_SUPPORTED,
+				EC_MKBP_EVENT_SWITCH, &event_data,
+				sizeof(event_data.switches));
+	if (ret)
+		return ret;
+	switches = get_unaligned_le32(&event_data.switches);
+
+	if (!buttons && !switches)
+		return 0;
+
+	/*
+	 * We call the non-matrix buttons/switches 'input1', if present.
+	 * Allocate phys before input dev, to ensure correct tear-down
+	 * ordering.
+	 */
+	phys = devm_kasprintf(dev, GFP_KERNEL, "%s/input1", ec_dev->phys_name);
+	if (!phys)
+		return -ENOMEM;
+
+	idev = devm_input_allocate_device(dev);
+	if (!idev)
+		return -ENOMEM;
+
+	idev->name = "cros_ec_buttons";
+	idev->phys = phys;
+	__set_bit(EV_REP, idev->evbit);
+
+	idev->id.bustype = BUS_VIRTUAL;
+	idev->id.version = 1;
+	idev->id.product = 0;
+	idev->dev.parent = dev;
+
+	input_set_drvdata(idev, ckdev);
+	ckdev->bs_idev = idev;
+
+	for (i = 0; i < ARRAY_SIZE(cros_ec_keyb_bs); i++) {
+		const struct cros_ec_bs_map *map = &cros_ec_keyb_bs[i];
+
+		if ((map->ev_type == EV_KEY && (buttons & BIT(map->bit))) ||
+		    (map->ev_type == EV_SW && (switches & BIT(map->bit))))
+			input_set_capability(idev, map->ev_type, map->code);
+	}
+
+	ret = cros_ec_keyb_query_switches(ckdev);
+	if (ret) {
+		dev_err(dev, "cannot query switches\n");
+		return ret;
+	}
+
+	ret = input_register_device(ckdev->bs_idev);
+	if (ret) {
+		dev_err(dev, "cannot register input device\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * cros_ec_keyb_register_bs - Register matrix keys
+ *
+ * Handles all the bits of the keyboard driver related to matrix keys.
+ *
+ * @ckdev: The keyboard device
+ *
+ * Returns 0 if no error or -error upon error.
+ */
+static int cros_ec_keyb_register_matrix(struct cros_ec_keyb *ckdev)
+{
+	struct cros_ec_device *ec_dev = ckdev->ec;
+	struct device *dev = ckdev->dev;
+	struct input_dev *idev;
+	const char *phys;
+	int err;
+
+	err = matrix_keypad_parse_properties(dev, &ckdev->rows, &ckdev->cols);
+	if (err)
+		return err;
+
+	ckdev->valid_keys = devm_kzalloc(dev, ckdev->cols, GFP_KERNEL);
+	if (!ckdev->valid_keys)
+		return -ENOMEM;
+
+	ckdev->old_kb_state = devm_kzalloc(dev, ckdev->cols, GFP_KERNEL);
+	if (!ckdev->old_kb_state)
+		return -ENOMEM;
+
+	/*
+	 * We call the keyboard matrix 'input0'. Allocate phys before input
+	 * dev, to ensure correct tear-down ordering.
+	 */
+	phys = devm_kasprintf(dev, GFP_KERNEL, "%s/input0", ec_dev->phys_name);
+	if (!phys)
+		return -ENOMEM;
+
+	idev = devm_input_allocate_device(dev);
+	if (!idev)
+		return -ENOMEM;
+
+	idev->name = CROS_EC_DEV_NAME;
+	idev->phys = phys;
+	__set_bit(EV_REP, idev->evbit);
+
+	idev->id.bustype = BUS_VIRTUAL;
+	idev->id.version = 1;
+	idev->id.product = 0;
+	idev->dev.parent = dev;
+
+	ckdev->ghost_filter = of_property_read_bool(dev->of_node,
+					"google,needs-ghost-filter");
+
+	err = matrix_keypad_build_keymap(NULL, NULL, ckdev->rows, ckdev->cols,
+					 NULL, idev);
+	if (err) {
+		dev_err(dev, "cannot build key matrix\n");
+		return err;
+	}
+
+	ckdev->row_shift = get_count_order(ckdev->cols);
+
+	input_set_capability(idev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(idev, ckdev);
+	ckdev->idev = idev;
+	cros_ec_keyb_compute_valid_keys(ckdev);
+
+	err = input_register_device(ckdev->idev);
+	if (err) {
+		dev_err(dev, "cannot register input device\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int cros_ec_keyb_probe(struct platform_device *pdev)
+{
+	struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct cros_ec_keyb *ckdev;
+	int err;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	ckdev = devm_kzalloc(dev, sizeof(*ckdev), GFP_KERNEL);
+	if (!ckdev)
+		return -ENOMEM;
+
+	ckdev->ec = ec;
+	ckdev->dev = dev;
+	dev_set_drvdata(dev, ckdev);
+
+	err = cros_ec_keyb_register_matrix(ckdev);
+	if (err) {
+		dev_err(dev, "cannot register matrix inputs: %d\n", err);
+		return err;
+	}
+
+	err = cros_ec_keyb_register_bs(ckdev);
+	if (err) {
+		dev_err(dev, "cannot register non-matrix inputs: %d\n", err);
+		return err;
+	}
+
+	ckdev->notifier.notifier_call = cros_ec_keyb_work;
+	err = blocking_notifier_chain_register(&ckdev->ec->event_notifier,
+					       &ckdev->notifier);
+	if (err) {
+		dev_err(dev, "cannot register notifier: %d\n", err);
+		return err;
+	}
+
+	device_init_wakeup(ckdev->dev, true);
+	return 0;
+}
+
+static int cros_ec_keyb_remove(struct platform_device *pdev)
+{
+	struct cros_ec_keyb *ckdev = dev_get_drvdata(&pdev->dev);
+
+	blocking_notifier_chain_unregister(&ckdev->ec->event_notifier,
+					   &ckdev->notifier);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id cros_ec_keyb_of_match[] = {
+	{ .compatible = "google,cros-ec-keyb" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cros_ec_keyb_of_match);
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume);
+
+static struct platform_driver cros_ec_keyb_driver = {
+	.probe = cros_ec_keyb_probe,
+	.remove = cros_ec_keyb_remove,
+	.driver = {
+		.name = "cros-ec-keyb",
+		.of_match_table = of_match_ptr(cros_ec_keyb_of_match),
+		.pm = &cros_ec_keyb_pm_ops,
+	},
+};
+
+module_platform_driver(cros_ec_keyb_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ChromeOS EC keyboard driver");
+MODULE_ALIAS("platform:cros-ec-keyb");
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
new file mode 100644
index 000000000..f489cd585
--- /dev/null
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DaVinci Key Scan Driver for TI platforms
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * Initial Code: Sandeep Paulraj <s-paulraj@ti.com>
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+
+#include <linux/platform_data/keyscan-davinci.h>
+
+/* Key scan registers */
+#define DAVINCI_KEYSCAN_KEYCTRL		0x0000
+#define DAVINCI_KEYSCAN_INTENA		0x0004
+#define DAVINCI_KEYSCAN_INTFLAG		0x0008
+#define DAVINCI_KEYSCAN_INTCLR		0x000c
+#define DAVINCI_KEYSCAN_STRBWIDTH	0x0010
+#define DAVINCI_KEYSCAN_INTERVAL	0x0014
+#define DAVINCI_KEYSCAN_CONTTIME	0x0018
+#define DAVINCI_KEYSCAN_CURRENTST	0x001c
+#define DAVINCI_KEYSCAN_PREVSTATE	0x0020
+#define DAVINCI_KEYSCAN_EMUCTRL		0x0024
+#define DAVINCI_KEYSCAN_IODFTCTRL	0x002c
+
+/* Key Control Register (KEYCTRL) */
+#define DAVINCI_KEYSCAN_KEYEN		0x00000001
+#define DAVINCI_KEYSCAN_PREVMODE	0x00000002
+#define DAVINCI_KEYSCAN_CHATOFF		0x00000004
+#define DAVINCI_KEYSCAN_AUTODET		0x00000008
+#define DAVINCI_KEYSCAN_SCANMODE	0x00000010
+#define DAVINCI_KEYSCAN_OUTTYPE		0x00000020
+
+/* Masks for the interrupts */
+#define DAVINCI_KEYSCAN_INT_CONT	0x00000008
+#define DAVINCI_KEYSCAN_INT_OFF		0x00000004
+#define DAVINCI_KEYSCAN_INT_ON		0x00000002
+#define DAVINCI_KEYSCAN_INT_CHANGE	0x00000001
+#define DAVINCI_KEYSCAN_INT_ALL		0x0000000f
+
+struct davinci_ks {
+	struct input_dev		*input;
+	struct davinci_ks_platform_data	*pdata;
+	int				irq;
+	void __iomem			*base;
+	resource_size_t			pbase;
+	size_t				base_size;
+	unsigned short			keymap[];
+};
+
+/* Initializing the kp Module */
+static int __init davinci_ks_initialize(struct davinci_ks *davinci_ks)
+{
+	struct device *dev = &davinci_ks->input->dev;
+	struct davinci_ks_platform_data *pdata = davinci_ks->pdata;
+	u32 matrix_ctrl;
+
+	/* Enable all interrupts */
+	__raw_writel(DAVINCI_KEYSCAN_INT_ALL,
+		     davinci_ks->base + DAVINCI_KEYSCAN_INTENA);
+
+	/* Clear interrupts if any */
+	__raw_writel(DAVINCI_KEYSCAN_INT_ALL,
+		     davinci_ks->base + DAVINCI_KEYSCAN_INTCLR);
+
+	/* Setup the scan period = strobe + interval */
+	__raw_writel(pdata->strobe,
+		     davinci_ks->base + DAVINCI_KEYSCAN_STRBWIDTH);
+	__raw_writel(pdata->interval,
+		     davinci_ks->base + DAVINCI_KEYSCAN_INTERVAL);
+	__raw_writel(0x01,
+		     davinci_ks->base + DAVINCI_KEYSCAN_CONTTIME);
+
+	/* Define matrix type */
+	switch (pdata->matrix_type) {
+	case DAVINCI_KEYSCAN_MATRIX_4X4:
+		matrix_ctrl = 0;
+		break;
+	case DAVINCI_KEYSCAN_MATRIX_5X3:
+		matrix_ctrl = (1 << 6);
+		break;
+	default:
+		dev_err(dev->parent, "wrong matrix type\n");
+		return -EINVAL;
+	}
+
+	/* Enable key scan module and set matrix type */
+	__raw_writel(DAVINCI_KEYSCAN_AUTODET | DAVINCI_KEYSCAN_KEYEN |
+		     matrix_ctrl, davinci_ks->base + DAVINCI_KEYSCAN_KEYCTRL);
+
+	return 0;
+}
+
+static irqreturn_t davinci_ks_interrupt(int irq, void *dev_id)
+{
+	struct davinci_ks *davinci_ks = dev_id;
+	struct device *dev = &davinci_ks->input->dev;
+	unsigned short *keymap = davinci_ks->keymap;
+	int keymapsize = davinci_ks->pdata->keymapsize;
+	u32 prev_status, new_status, changed;
+	bool release;
+	int keycode = KEY_UNKNOWN;
+	int i;
+
+	/* Disable interrupt */
+	__raw_writel(0x0, davinci_ks->base + DAVINCI_KEYSCAN_INTENA);
+
+	/* Reading previous and new status of the key scan */
+	prev_status = __raw_readl(davinci_ks->base + DAVINCI_KEYSCAN_PREVSTATE);
+	new_status = __raw_readl(davinci_ks->base + DAVINCI_KEYSCAN_CURRENTST);
+
+	changed = prev_status ^ new_status;
+
+	if (changed) {
+		/*
+		 * It goes through all bits in 'changed' to ensure
+		 * that no key changes are being missed
+		 */
+		for (i = 0 ; i < keymapsize; i++) {
+			if ((changed>>i) & 0x1) {
+				keycode = keymap[i];
+				release = (new_status >> i) & 0x1;
+				dev_dbg(dev->parent, "key %d %s\n", keycode,
+					release ? "released" : "pressed");
+				input_report_key(davinci_ks->input, keycode,
+						 !release);
+				input_sync(davinci_ks->input);
+			}
+		}
+		/* Clearing interrupt */
+		__raw_writel(DAVINCI_KEYSCAN_INT_ALL,
+			     davinci_ks->base + DAVINCI_KEYSCAN_INTCLR);
+	}
+
+	/* Enable interrupts */
+	__raw_writel(0x1, davinci_ks->base + DAVINCI_KEYSCAN_INTENA);
+
+	return IRQ_HANDLED;
+}
+
+static int __init davinci_ks_probe(struct platform_device *pdev)
+{
+	struct davinci_ks *davinci_ks;
+	struct input_dev *key_dev;
+	struct resource *res, *mem;
+	struct device *dev = &pdev->dev;
+	struct davinci_ks_platform_data *pdata = dev_get_platdata(dev);
+	int error, i;
+
+	if (pdata->device_enable) {
+		error = pdata->device_enable(dev);
+		if (error < 0) {
+			dev_dbg(dev, "device enable function failed\n");
+			return error;
+		}
+	}
+
+	if (!pdata->keymap) {
+		dev_dbg(dev, "no keymap from pdata\n");
+		return -EINVAL;
+	}
+
+	davinci_ks = kzalloc(sizeof(struct davinci_ks) +
+		sizeof(unsigned short) * pdata->keymapsize, GFP_KERNEL);
+	if (!davinci_ks) {
+		dev_dbg(dev, "could not allocate memory for private data\n");
+		return -ENOMEM;
+	}
+
+	memcpy(davinci_ks->keymap, pdata->keymap,
+		sizeof(unsigned short) * pdata->keymapsize);
+
+	key_dev = input_allocate_device();
+	if (!key_dev) {
+		dev_dbg(dev, "could not allocate input device\n");
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	davinci_ks->input = key_dev;
+
+	davinci_ks->irq = platform_get_irq(pdev, 0);
+	if (davinci_ks->irq < 0) {
+		error = davinci_ks->irq;
+		goto fail2;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "no mem resource\n");
+		error = -EINVAL;
+		goto fail2;
+	}
+
+	davinci_ks->pbase = res->start;
+	davinci_ks->base_size = resource_size(res);
+
+	mem = request_mem_region(davinci_ks->pbase, davinci_ks->base_size,
+				 pdev->name);
+	if (!mem) {
+		dev_err(dev, "key scan registers at %08x are not free\n",
+			davinci_ks->pbase);
+		error = -EBUSY;
+		goto fail2;
+	}
+
+	davinci_ks->base = ioremap(davinci_ks->pbase, davinci_ks->base_size);
+	if (!davinci_ks->base) {
+		dev_err(dev, "can't ioremap MEM resource.\n");
+		error = -ENOMEM;
+		goto fail3;
+	}
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (pdata->rep)
+		__set_bit(EV_REP, key_dev->evbit);
+
+	/* Setup input device */
+	__set_bit(EV_KEY, key_dev->evbit);
+
+	/* Setup the platform data */
+	davinci_ks->pdata = pdata;
+
+	for (i = 0; i < davinci_ks->pdata->keymapsize; i++)
+		__set_bit(davinci_ks->pdata->keymap[i], key_dev->keybit);
+
+	key_dev->name = "davinci_keyscan";
+	key_dev->phys = "davinci_keyscan/input0";
+	key_dev->dev.parent = dev;
+	key_dev->id.bustype = BUS_HOST;
+	key_dev->id.vendor = 0x0001;
+	key_dev->id.product = 0x0001;
+	key_dev->id.version = 0x0001;
+	key_dev->keycode = davinci_ks->keymap;
+	key_dev->keycodesize = sizeof(davinci_ks->keymap[0]);
+	key_dev->keycodemax = davinci_ks->pdata->keymapsize;
+
+	error = input_register_device(davinci_ks->input);
+	if (error < 0) {
+		dev_err(dev, "unable to register davinci key scan device\n");
+		goto fail4;
+	}
+
+	error = request_irq(davinci_ks->irq, davinci_ks_interrupt,
+			  0, pdev->name, davinci_ks);
+	if (error < 0) {
+		dev_err(dev, "unable to register davinci key scan interrupt\n");
+		goto fail5;
+	}
+
+	error = davinci_ks_initialize(davinci_ks);
+	if (error < 0) {
+		dev_err(dev, "unable to initialize davinci key scan device\n");
+		goto fail6;
+	}
+
+	platform_set_drvdata(pdev, davinci_ks);
+	return 0;
+
+fail6:
+	free_irq(davinci_ks->irq, davinci_ks);
+fail5:
+	input_unregister_device(davinci_ks->input);
+	key_dev = NULL;
+fail4:
+	iounmap(davinci_ks->base);
+fail3:
+	release_mem_region(davinci_ks->pbase, davinci_ks->base_size);
+fail2:
+	input_free_device(key_dev);
+fail1:
+	kfree(davinci_ks);
+
+	return error;
+}
+
+static int davinci_ks_remove(struct platform_device *pdev)
+{
+	struct davinci_ks *davinci_ks = platform_get_drvdata(pdev);
+
+	free_irq(davinci_ks->irq, davinci_ks);
+
+	input_unregister_device(davinci_ks->input);
+
+	iounmap(davinci_ks->base);
+	release_mem_region(davinci_ks->pbase, davinci_ks->base_size);
+
+	kfree(davinci_ks);
+
+	return 0;
+}
+
+static struct platform_driver davinci_ks_driver = {
+	.driver	= {
+		.name = "davinci_keyscan",
+	},
+	.remove	= davinci_ks_remove,
+};
+
+module_platform_driver_probe(davinci_ks_driver, davinci_ks_probe);
+
+MODULE_AUTHOR("Miguel Aguilar");
+MODULE_DESCRIPTION("Texas Instruments DaVinci Key Scan Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/dlink-dir685-touchkeys.c b/drivers/input/keyboard/dlink-dir685-touchkeys.c
new file mode 100644
index 000000000..a69dcc3bd
--- /dev/null
+++ b/drivers/input/keyboard/dlink-dir685-touchkeys.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * D-Link DIR-685 router I2C-based Touchkeys input driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This is a one-off touchkey controller based on the Cypress Semiconductor
+ * CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
+ * board inside the router is named E119921
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+
+struct dir685_touchkeys {
+	struct device		*dev;
+	struct i2c_client	*client;
+	struct input_dev	*input;
+	unsigned long		cur_key;
+	u16			codes[7];
+};
+
+static irqreturn_t dir685_tk_irq_thread(int irq, void *data)
+{
+	struct dir685_touchkeys *tk = data;
+	const int num_bits = min_t(int, ARRAY_SIZE(tk->codes), 16);
+	unsigned long changed;
+	u8 buf[6];
+	unsigned long key;
+	int i;
+	int err;
+
+	memset(buf, 0, sizeof(buf));
+	err = i2c_master_recv(tk->client, buf, sizeof(buf));
+	if (err != sizeof(buf)) {
+		dev_err(tk->dev, "short read %d\n", err);
+		return IRQ_HANDLED;
+	}
+
+	dev_dbg(tk->dev, "IN: %*ph\n", (int)sizeof(buf), buf);
+	key = be16_to_cpup((__be16 *) &buf[4]);
+
+	/* Figure out if any bits went high or low since last message */
+	changed = tk->cur_key ^ key;
+	for_each_set_bit(i, &changed, num_bits) {
+		dev_dbg(tk->dev, "key %d is %s\n", i,
+			test_bit(i, &key) ? "down" : "up");
+		input_report_key(tk->input, tk->codes[i], test_bit(i, &key));
+	}
+
+	/* Store currently down keys */
+	tk->cur_key = key;
+	input_sync(tk->input);
+
+	return IRQ_HANDLED;
+}
+
+static int dir685_tk_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct dir685_touchkeys *tk;
+	struct device *dev = &client->dev;
+	u8 bl_data[] = { 0xa7, 0x40 };
+	int err;
+	int i;
+
+	tk = devm_kzalloc(&client->dev, sizeof(*tk), GFP_KERNEL);
+	if (!tk)
+		return -ENOMEM;
+
+	tk->input = devm_input_allocate_device(dev);
+	if (!tk->input)
+		return -ENOMEM;
+
+	tk->client = client;
+	tk->dev = dev;
+
+	tk->input->keycodesize = sizeof(u16);
+	tk->input->keycodemax = ARRAY_SIZE(tk->codes);
+	tk->input->keycode = tk->codes;
+	tk->codes[0] = KEY_UP;
+	tk->codes[1] = KEY_DOWN;
+	tk->codes[2] = KEY_LEFT;
+	tk->codes[3] = KEY_RIGHT;
+	tk->codes[4] = KEY_ENTER;
+	tk->codes[5] = KEY_WPS_BUTTON;
+	/*
+	 * This key appears in the vendor driver, but I have
+	 * not been able to activate it.
+	 */
+	tk->codes[6] = KEY_RESERVED;
+
+	__set_bit(EV_KEY, tk->input->evbit);
+	for (i = 0; i < ARRAY_SIZE(tk->codes); i++)
+		__set_bit(tk->codes[i], tk->input->keybit);
+	__clear_bit(KEY_RESERVED, tk->input->keybit);
+
+	tk->input->name = "D-Link DIR-685 touchkeys";
+	tk->input->id.bustype = BUS_I2C;
+
+	err = input_register_device(tk->input);
+	if (err)
+		return err;
+
+	/* Set the brightness to max level */
+	err = i2c_master_send(client, bl_data, sizeof(bl_data));
+	if (err != sizeof(bl_data))
+		dev_warn(tk->dev, "error setting brightness level\n");
+
+	if (!client->irq) {
+		dev_err(dev, "no IRQ on the I2C device\n");
+		return -ENODEV;
+	}
+	err = devm_request_threaded_irq(dev, client->irq,
+					NULL, dir685_tk_irq_thread,
+					IRQF_ONESHOT,
+					"dir685-tk", tk);
+	if (err) {
+		dev_err(dev, "can't request IRQ\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id dir685_tk_id[] = {
+	{ "dir685tk", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, dir685_tk_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id dir685_tk_of_match[] = {
+	{ .compatible = "dlink,dir685-touchkeys" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dir685_tk_of_match);
+#endif
+
+static struct i2c_driver dir685_tk_i2c_driver = {
+	.driver = {
+		.name	= "dlink-dir685-touchkeys",
+		.of_match_table = of_match_ptr(dir685_tk_of_match),
+	},
+	.probe		= dir685_tk_probe,
+	.id_table	= dir685_tk_id,
+};
+module_i2c_driver(dir685_tk_i2c_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("D-Link DIR-685 touchkeys driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
new file mode 100644
index 000000000..f831f0150
--- /dev/null
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the Cirrus EP93xx matrix keypad controller.
+ *
+ * Copyright (c) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * Based on the pxa27x matrix keypad controller by Rodolfo Giometti.
+ *
+ * NOTE:
+ *
+ * The 3-key reset is triggered by pressing the 3 keys in
+ * Row 0, Columns 2, 4, and 7 at the same time.  This action can
+ * be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag.
+ *
+ * Normal operation for the matrix does not autorepeat the key press.
+ * This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT
+ * flag.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/slab.h>
+#include <linux/soc/cirrus/ep93xx.h>
+#include <linux/platform_data/keypad-ep93xx.h>
+
+/*
+ * Keypad Interface Register offsets
+ */
+#define KEY_INIT		0x00	/* Key Scan Initialization register */
+#define KEY_DIAG		0x04	/* Key Scan Diagnostic register */
+#define KEY_REG			0x08	/* Key Value Capture register */
+
+/* Key Scan Initialization Register bit defines */
+#define KEY_INIT_DBNC_MASK	(0x00ff0000)
+#define KEY_INIT_DBNC_SHIFT	(16)
+#define KEY_INIT_DIS3KY		(1<<15)
+#define KEY_INIT_DIAG		(1<<14)
+#define KEY_INIT_BACK		(1<<13)
+#define KEY_INIT_T2		(1<<12)
+#define KEY_INIT_PRSCL_MASK	(0x000003ff)
+#define KEY_INIT_PRSCL_SHIFT	(0)
+
+/* Key Scan Diagnostic Register bit defines */
+#define KEY_DIAG_MASK		(0x0000003f)
+#define KEY_DIAG_SHIFT		(0)
+
+/* Key Value Capture Register bit defines */
+#define KEY_REG_K		(1<<15)
+#define KEY_REG_INT		(1<<14)
+#define KEY_REG_2KEYS		(1<<13)
+#define KEY_REG_1KEY		(1<<12)
+#define KEY_REG_KEY2_MASK	(0x00000fc0)
+#define KEY_REG_KEY2_SHIFT	(6)
+#define KEY_REG_KEY1_MASK	(0x0000003f)
+#define KEY_REG_KEY1_SHIFT	(0)
+
+#define EP93XX_MATRIX_SIZE	(EP93XX_MATRIX_ROWS * EP93XX_MATRIX_COLS)
+
+struct ep93xx_keypad {
+	struct ep93xx_keypad_platform_data *pdata;
+	struct input_dev *input_dev;
+	struct clk *clk;
+
+	void __iomem *mmio_base;
+
+	unsigned short keycodes[EP93XX_MATRIX_SIZE];
+
+	int key1;
+	int key2;
+
+	int irq;
+
+	bool enabled;
+};
+
+static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id)
+{
+	struct ep93xx_keypad *keypad = dev_id;
+	struct input_dev *input_dev = keypad->input_dev;
+	unsigned int status;
+	int keycode, key1, key2;
+
+	status = __raw_readl(keypad->mmio_base + KEY_REG);
+
+	keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT;
+	key1 = keypad->keycodes[keycode];
+
+	keycode = (status & KEY_REG_KEY2_MASK) >> KEY_REG_KEY2_SHIFT;
+	key2 = keypad->keycodes[keycode];
+
+	if (status & KEY_REG_2KEYS) {
+		if (keypad->key1 && key1 != keypad->key1 && key2 != keypad->key1)
+			input_report_key(input_dev, keypad->key1, 0);
+
+		if (keypad->key2 && key1 != keypad->key2 && key2 != keypad->key2)
+			input_report_key(input_dev, keypad->key2, 0);
+
+		input_report_key(input_dev, key1, 1);
+		input_report_key(input_dev, key2, 1);
+
+		keypad->key1 = key1;
+		keypad->key2 = key2;
+
+	} else if (status & KEY_REG_1KEY) {
+		if (keypad->key1 && key1 != keypad->key1)
+			input_report_key(input_dev, keypad->key1, 0);
+
+		if (keypad->key2 && key1 != keypad->key2)
+			input_report_key(input_dev, keypad->key2, 0);
+
+		input_report_key(input_dev, key1, 1);
+
+		keypad->key1 = key1;
+		keypad->key2 = 0;
+
+	} else {
+		input_report_key(input_dev, keypad->key1, 0);
+		input_report_key(input_dev, keypad->key2, 0);
+
+		keypad->key1 = keypad->key2 = 0;
+	}
+	input_sync(input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static void ep93xx_keypad_config(struct ep93xx_keypad *keypad)
+{
+	struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int val = 0;
+
+	clk_set_rate(keypad->clk, pdata->clk_rate);
+
+	if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY)
+		val |= KEY_INIT_DIS3KY;
+	if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE)
+		val |= KEY_INIT_DIAG;
+	if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE)
+		val |= KEY_INIT_BACK;
+	if (pdata->flags & EP93XX_KEYPAD_TEST_MODE)
+		val |= KEY_INIT_T2;
+
+	val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK);
+
+	val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK);
+
+	__raw_writel(val, keypad->mmio_base + KEY_INIT);
+}
+
+static int ep93xx_keypad_open(struct input_dev *pdev)
+{
+	struct ep93xx_keypad *keypad = input_get_drvdata(pdev);
+
+	if (!keypad->enabled) {
+		ep93xx_keypad_config(keypad);
+		clk_enable(keypad->clk);
+		keypad->enabled = true;
+	}
+
+	return 0;
+}
+
+static void ep93xx_keypad_close(struct input_dev *pdev)
+{
+	struct ep93xx_keypad *keypad = input_get_drvdata(pdev);
+
+	if (keypad->enabled) {
+		clk_disable(keypad->clk);
+		keypad->enabled = false;
+	}
+}
+
+
+#ifdef CONFIG_PM_SLEEP
+static int ep93xx_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (keypad->enabled) {
+		clk_disable(keypad->clk);
+		keypad->enabled = false;
+	}
+
+	mutex_unlock(&input_dev->mutex);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(keypad->irq);
+
+	return 0;
+}
+
+static int ep93xx_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(keypad->irq);
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users) {
+		if (!keypad->enabled) {
+			ep93xx_keypad_config(keypad);
+			clk_enable(keypad->clk);
+			keypad->enabled = true;
+		}
+	}
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ep93xx_keypad_pm_ops,
+			 ep93xx_keypad_suspend, ep93xx_keypad_resume);
+
+static int ep93xx_keypad_probe(struct platform_device *pdev)
+{
+	struct ep93xx_keypad *keypad;
+	const struct matrix_keymap_data *keymap_data;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int err;
+
+	keypad = kzalloc(sizeof(struct ep93xx_keypad), GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	keypad->pdata = dev_get_platdata(&pdev->dev);
+	if (!keypad->pdata) {
+		err = -EINVAL;
+		goto failed_free;
+	}
+
+	keymap_data = keypad->pdata->keymap_data;
+	if (!keymap_data) {
+		err = -EINVAL;
+		goto failed_free;
+	}
+
+	keypad->irq = platform_get_irq(pdev, 0);
+	if (keypad->irq < 0) {
+		err = keypad->irq;
+		goto failed_free;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENXIO;
+		goto failed_free;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (!res) {
+		err = -EBUSY;
+		goto failed_free;
+	}
+
+	keypad->mmio_base = ioremap(res->start, resource_size(res));
+	if (keypad->mmio_base == NULL) {
+		err = -ENXIO;
+		goto failed_free_mem;
+	}
+
+	err = ep93xx_keypad_acquire_gpio(pdev);
+	if (err)
+		goto failed_free_io;
+
+	keypad->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad->clk)) {
+		err = PTR_ERR(keypad->clk);
+		goto failed_free_gpio;
+	}
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		err = -ENOMEM;
+		goto failed_put_clk;
+	}
+
+	keypad->input_dev = input_dev;
+
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->open = ep93xx_keypad_open;
+	input_dev->close = ep93xx_keypad_close;
+	input_dev->dev.parent = &pdev->dev;
+
+	err = matrix_keypad_build_keymap(keymap_data, NULL,
+					 EP93XX_MATRIX_ROWS, EP93XX_MATRIX_COLS,
+					 keypad->keycodes, input_dev);
+	if (err)
+		goto failed_free_dev;
+
+	if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
+		__set_bit(EV_REP, input_dev->evbit);
+	input_set_drvdata(input_dev, keypad);
+
+	err = request_irq(keypad->irq, ep93xx_keypad_irq_handler,
+			  0, pdev->name, keypad);
+	if (err)
+		goto failed_free_dev;
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto failed_free_irq;
+
+	platform_set_drvdata(pdev, keypad);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+
+failed_free_irq:
+	free_irq(keypad->irq, keypad);
+failed_free_dev:
+	input_free_device(input_dev);
+failed_put_clk:
+	clk_put(keypad->clk);
+failed_free_gpio:
+	ep93xx_keypad_release_gpio(pdev);
+failed_free_io:
+	iounmap(keypad->mmio_base);
+failed_free_mem:
+	release_mem_region(res->start, resource_size(res));
+failed_free:
+	kfree(keypad);
+	return err;
+}
+
+static int ep93xx_keypad_remove(struct platform_device *pdev)
+{
+	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	free_irq(keypad->irq, keypad);
+
+	if (keypad->enabled)
+		clk_disable(keypad->clk);
+	clk_put(keypad->clk);
+
+	input_unregister_device(keypad->input_dev);
+
+	ep93xx_keypad_release_gpio(pdev);
+
+	iounmap(keypad->mmio_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(keypad);
+
+	return 0;
+}
+
+static struct platform_driver ep93xx_keypad_driver = {
+	.driver		= {
+		.name	= "ep93xx-keypad",
+		.pm	= &ep93xx_keypad_pm_ops,
+	},
+	.probe		= ep93xx_keypad_probe,
+	.remove		= ep93xx_keypad_remove,
+};
+module_platform_driver(ep93xx_keypad_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("EP93xx Matrix Keypad Controller");
+MODULE_ALIAS("platform:ep93xx-keypad");
diff --git a/drivers/input/keyboard/goldfish_events.c b/drivers/input/keyboard/goldfish_events.c
new file mode 100644
index 000000000..57d435fc5
--- /dev/null
+++ b/drivers/input/keyboard/goldfish_events.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (C) 2012 Intel, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+
+enum {
+	REG_READ        = 0x00,
+	REG_SET_PAGE    = 0x00,
+	REG_LEN         = 0x04,
+	REG_DATA        = 0x08,
+
+	PAGE_NAME       = 0x00000,
+	PAGE_EVBITS     = 0x10000,
+	PAGE_ABSDATA    = 0x20000 | EV_ABS,
+};
+
+struct event_dev {
+	struct input_dev *input;
+	int irq;
+	void __iomem *addr;
+	char name[];
+};
+
+static irqreturn_t events_interrupt(int irq, void *dev_id)
+{
+	struct event_dev *edev = dev_id;
+	unsigned int type, code, value;
+
+	type = __raw_readl(edev->addr + REG_READ);
+	code = __raw_readl(edev->addr + REG_READ);
+	value = __raw_readl(edev->addr + REG_READ);
+
+	input_event(edev->input, type, code, value);
+	input_sync(edev->input);
+	return IRQ_HANDLED;
+}
+
+static void events_import_bits(struct event_dev *edev,
+			unsigned long bits[], unsigned int type, size_t count)
+{
+	void __iomem *addr = edev->addr;
+	int i, j;
+	size_t size;
+	uint8_t val;
+
+	__raw_writel(PAGE_EVBITS | type, addr + REG_SET_PAGE);
+
+	size = __raw_readl(addr + REG_LEN) * 8;
+	if (size < count)
+		count = size;
+
+	addr += REG_DATA;
+	for (i = 0; i < count; i += 8) {
+		val = __raw_readb(addr++);
+		for (j = 0; j < 8; j++)
+			if (val & 1 << j)
+				set_bit(i + j, bits);
+	}
+}
+
+static void events_import_abs_params(struct event_dev *edev)
+{
+	struct input_dev *input_dev = edev->input;
+	void __iomem *addr = edev->addr;
+	u32 val[4];
+	int count;
+	int i, j;
+
+	__raw_writel(PAGE_ABSDATA, addr + REG_SET_PAGE);
+
+	count = __raw_readl(addr + REG_LEN) / sizeof(val);
+	if (count > ABS_MAX)
+		count = ABS_MAX;
+
+	for (i = 0; i < count; i++) {
+		if (!test_bit(i, input_dev->absbit))
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(val); j++) {
+			int offset = (i * ARRAY_SIZE(val) + j) * sizeof(u32);
+
+			val[j] = __raw_readl(edev->addr + REG_DATA + offset);
+		}
+
+		input_set_abs_params(input_dev, i,
+				     val[0], val[1], val[2], val[3]);
+	}
+}
+
+static int events_probe(struct platform_device *pdev)
+{
+	struct input_dev *input_dev;
+	struct event_dev *edev;
+	struct resource *res;
+	unsigned int keymapnamelen;
+	void __iomem *addr;
+	int irq;
+	int i;
+	int error;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	addr = devm_ioremap(&pdev->dev, res->start, 4096);
+	if (!addr)
+		return -ENOMEM;
+
+	__raw_writel(PAGE_NAME, addr + REG_SET_PAGE);
+	keymapnamelen = __raw_readl(addr + REG_LEN);
+
+	edev = devm_kzalloc(&pdev->dev,
+			    sizeof(struct event_dev) + keymapnamelen + 1,
+			    GFP_KERNEL);
+	if (!edev)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
+
+	edev->input = input_dev;
+	edev->addr = addr;
+	edev->irq = irq;
+
+	for (i = 0; i < keymapnamelen; i++)
+		edev->name[i] = __raw_readb(edev->addr + REG_DATA + i);
+
+	pr_debug("%s: keymap=%s\n", __func__, edev->name);
+
+	input_dev->name = edev->name;
+	input_dev->id.bustype = BUS_HOST;
+
+	events_import_bits(edev, input_dev->evbit, EV_SYN, EV_MAX);
+	events_import_bits(edev, input_dev->keybit, EV_KEY, KEY_MAX);
+	events_import_bits(edev, input_dev->relbit, EV_REL, REL_MAX);
+	events_import_bits(edev, input_dev->absbit, EV_ABS, ABS_MAX);
+	events_import_bits(edev, input_dev->mscbit, EV_MSC, MSC_MAX);
+	events_import_bits(edev, input_dev->ledbit, EV_LED, LED_MAX);
+	events_import_bits(edev, input_dev->sndbit, EV_SND, SND_MAX);
+	events_import_bits(edev, input_dev->ffbit, EV_FF, FF_MAX);
+	events_import_bits(edev, input_dev->swbit, EV_SW, SW_MAX);
+
+	events_import_abs_params(edev);
+
+	error = devm_request_irq(&pdev->dev, edev->irq, events_interrupt, 0,
+				 "goldfish-events-keypad", edev);
+	if (error)
+		return error;
+
+	error = input_register_device(input_dev);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct of_device_id goldfish_events_of_match[] = {
+	{ .compatible = "google,goldfish-events-keypad", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, goldfish_events_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id goldfish_events_acpi_match[] = {
+	{ "GFSH0002", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, goldfish_events_acpi_match);
+#endif
+
+static struct platform_driver events_driver = {
+	.probe	= events_probe,
+	.driver	= {
+		.name	= "goldfish_events",
+		.of_match_table = goldfish_events_of_match,
+		.acpi_match_table = ACPI_PTR(goldfish_events_acpi_match),
+	},
+};
+
+module_platform_driver(events_driver);
+
+MODULE_AUTHOR("Brian Swetland");
+MODULE_DESCRIPTION("Goldfish Event Device");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
new file mode 100644
index 000000000..f2d4e4daa
--- /dev/null
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -0,0 +1,1036 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for keys on GPIO lines capable of generating interrupts.
+ *
+ * Copyright 2005 Phil Blundell
+ * Copyright 2010, 2011 David Jander <david@protonic.nl>
+ */
+
+#include <linux/module.h>
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/sysctl.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/spinlock.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+struct gpio_button_data {
+	const struct gpio_keys_button *button;
+	struct input_dev *input;
+	struct gpio_desc *gpiod;
+
+	unsigned short *code;
+
+	struct timer_list release_timer;
+	unsigned int release_delay;	/* in msecs, for IRQ-only buttons */
+
+	struct delayed_work work;
+	unsigned int software_debounce;	/* in msecs, for GPIO-driven buttons */
+
+	unsigned int irq;
+	unsigned int wakeup_trigger_type;
+	spinlock_t lock;
+	bool disabled;
+	bool key_pressed;
+	bool suspended;
+};
+
+struct gpio_keys_drvdata {
+	const struct gpio_keys_platform_data *pdata;
+	struct input_dev *input;
+	struct mutex disable_lock;
+	unsigned short *keymap;
+	struct gpio_button_data data[];
+};
+
+/*
+ * SYSFS interface for enabling/disabling keys and switches:
+ *
+ * There are 4 attributes under /sys/devices/platform/gpio-keys/
+ *	keys [ro]              - bitmap of keys (EV_KEY) which can be
+ *	                         disabled
+ *	switches [ro]          - bitmap of switches (EV_SW) which can be
+ *	                         disabled
+ *	disabled_keys [rw]     - bitmap of keys currently disabled
+ *	disabled_switches [rw] - bitmap of switches currently disabled
+ *
+ * Userland can change these values and hence disable event generation
+ * for each key (or switch). Disabling a key means its interrupt line
+ * is disabled.
+ *
+ * For example, if we have following switches set up as gpio-keys:
+ *	SW_DOCK = 5
+ *	SW_CAMERA_LENS_COVER = 9
+ *	SW_KEYPAD_SLIDE = 10
+ *	SW_FRONT_PROXIMITY = 11
+ * This is read from switches:
+ *	11-9,5
+ * Next we want to disable proximity (11) and dock (5), we write:
+ *	11,5
+ * to file disabled_switches. Now proximity and dock IRQs are disabled.
+ * This can be verified by reading the file disabled_switches:
+ *	11,5
+ * If we now want to enable proximity (11) switch we write:
+ *	5
+ * to disabled_switches.
+ *
+ * We can disable only those keys which don't allow sharing the irq.
+ */
+
+/**
+ * get_n_events_by_type() - returns maximum number of events per @type
+ * @type: type of button (%EV_KEY, %EV_SW)
+ *
+ * Return value of this function can be used to allocate bitmap
+ * large enough to hold all bits for given type.
+ */
+static int get_n_events_by_type(int type)
+{
+	BUG_ON(type != EV_SW && type != EV_KEY);
+
+	return (type == EV_KEY) ? KEY_CNT : SW_CNT;
+}
+
+/**
+ * get_bm_events_by_type() - returns bitmap of supported events per @type
+ * @input: input device from which bitmap is retrieved
+ * @type: type of button (%EV_KEY, %EV_SW)
+ *
+ * Return value of this function can be used to allocate bitmap
+ * large enough to hold all bits for given type.
+ */
+static const unsigned long *get_bm_events_by_type(struct input_dev *dev,
+						  int type)
+{
+	BUG_ON(type != EV_SW && type != EV_KEY);
+
+	return (type == EV_KEY) ? dev->keybit : dev->swbit;
+}
+
+/**
+ * gpio_keys_disable_button() - disables given GPIO button
+ * @bdata: button data for button to be disabled
+ *
+ * Disables button pointed by @bdata. This is done by masking
+ * IRQ line. After this function is called, button won't generate
+ * input events anymore. Note that one can only disable buttons
+ * that don't share IRQs.
+ *
+ * Make sure that @bdata->disable_lock is locked when entering
+ * this function to avoid races when concurrent threads are
+ * disabling buttons at the same time.
+ */
+static void gpio_keys_disable_button(struct gpio_button_data *bdata)
+{
+	if (!bdata->disabled) {
+		/*
+		 * Disable IRQ and associated timer/work structure.
+		 */
+		disable_irq(bdata->irq);
+
+		if (bdata->gpiod)
+			cancel_delayed_work_sync(&bdata->work);
+		else
+			del_timer_sync(&bdata->release_timer);
+
+		bdata->disabled = true;
+	}
+}
+
+/**
+ * gpio_keys_enable_button() - enables given GPIO button
+ * @bdata: button data for button to be disabled
+ *
+ * Enables given button pointed by @bdata.
+ *
+ * Make sure that @bdata->disable_lock is locked when entering
+ * this function to avoid races with concurrent threads trying
+ * to enable the same button at the same time.
+ */
+static void gpio_keys_enable_button(struct gpio_button_data *bdata)
+{
+	if (bdata->disabled) {
+		enable_irq(bdata->irq);
+		bdata->disabled = false;
+	}
+}
+
+/**
+ * gpio_keys_attr_show_helper() - fill in stringified bitmap of buttons
+ * @ddata: pointer to drvdata
+ * @buf: buffer where stringified bitmap is written
+ * @type: button type (%EV_KEY, %EV_SW)
+ * @only_disabled: does caller want only those buttons that are
+ *                 currently disabled or all buttons that can be
+ *                 disabled
+ *
+ * This function writes buttons that can be disabled to @buf. If
+ * @only_disabled is true, then @buf contains only those buttons
+ * that are currently disabled. Returns 0 on success or negative
+ * errno on failure.
+ */
+static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata,
+					  char *buf, unsigned int type,
+					  bool only_disabled)
+{
+	int n_events = get_n_events_by_type(type);
+	unsigned long *bits;
+	ssize_t ret;
+	int i;
+
+	bits = bitmap_zalloc(n_events, GFP_KERNEL);
+	if (!bits)
+		return -ENOMEM;
+
+	for (i = 0; i < ddata->pdata->nbuttons; i++) {
+		struct gpio_button_data *bdata = &ddata->data[i];
+
+		if (bdata->button->type != type)
+			continue;
+
+		if (only_disabled && !bdata->disabled)
+			continue;
+
+		__set_bit(*bdata->code, bits);
+	}
+
+	ret = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", n_events, bits);
+	buf[ret++] = '\n';
+	buf[ret] = '\0';
+
+	bitmap_free(bits);
+
+	return ret;
+}
+
+/**
+ * gpio_keys_attr_store_helper() - enable/disable buttons based on given bitmap
+ * @ddata: pointer to drvdata
+ * @buf: buffer from userspace that contains stringified bitmap
+ * @type: button type (%EV_KEY, %EV_SW)
+ *
+ * This function parses stringified bitmap from @buf and disables/enables
+ * GPIO buttons accordingly. Returns 0 on success and negative error
+ * on failure.
+ */
+static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata,
+					   const char *buf, unsigned int type)
+{
+	int n_events = get_n_events_by_type(type);
+	const unsigned long *bitmap = get_bm_events_by_type(ddata->input, type);
+	unsigned long *bits;
+	ssize_t error;
+	int i;
+
+	bits = bitmap_zalloc(n_events, GFP_KERNEL);
+	if (!bits)
+		return -ENOMEM;
+
+	error = bitmap_parselist(buf, bits, n_events);
+	if (error)
+		goto out;
+
+	/* First validate */
+	if (!bitmap_subset(bits, bitmap, n_events)) {
+		error = -EINVAL;
+		goto out;
+	}
+
+	for (i = 0; i < ddata->pdata->nbuttons; i++) {
+		struct gpio_button_data *bdata = &ddata->data[i];
+
+		if (bdata->button->type != type)
+			continue;
+
+		if (test_bit(*bdata->code, bits) &&
+		    !bdata->button->can_disable) {
+			error = -EINVAL;
+			goto out;
+		}
+	}
+
+	mutex_lock(&ddata->disable_lock);
+
+	for (i = 0; i < ddata->pdata->nbuttons; i++) {
+		struct gpio_button_data *bdata = &ddata->data[i];
+
+		if (bdata->button->type != type)
+			continue;
+
+		if (test_bit(*bdata->code, bits))
+			gpio_keys_disable_button(bdata);
+		else
+			gpio_keys_enable_button(bdata);
+	}
+
+	mutex_unlock(&ddata->disable_lock);
+
+out:
+	bitmap_free(bits);
+	return error;
+}
+
+#define ATTR_SHOW_FN(name, type, only_disabled)				\
+static ssize_t gpio_keys_show_##name(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     char *buf)				\
+{									\
+	struct platform_device *pdev = to_platform_device(dev);		\
+	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);	\
+									\
+	return gpio_keys_attr_show_helper(ddata, buf,			\
+					  type, only_disabled);		\
+}
+
+ATTR_SHOW_FN(keys, EV_KEY, false);
+ATTR_SHOW_FN(switches, EV_SW, false);
+ATTR_SHOW_FN(disabled_keys, EV_KEY, true);
+ATTR_SHOW_FN(disabled_switches, EV_SW, true);
+
+/*
+ * ATTRIBUTES:
+ *
+ * /sys/devices/platform/gpio-keys/keys [ro]
+ * /sys/devices/platform/gpio-keys/switches [ro]
+ */
+static DEVICE_ATTR(keys, S_IRUGO, gpio_keys_show_keys, NULL);
+static DEVICE_ATTR(switches, S_IRUGO, gpio_keys_show_switches, NULL);
+
+#define ATTR_STORE_FN(name, type)					\
+static ssize_t gpio_keys_store_##name(struct device *dev,		\
+				      struct device_attribute *attr,	\
+				      const char *buf,			\
+				      size_t count)			\
+{									\
+	struct platform_device *pdev = to_platform_device(dev);		\
+	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);	\
+	ssize_t error;							\
+									\
+	error = gpio_keys_attr_store_helper(ddata, buf, type);		\
+	if (error)							\
+		return error;						\
+									\
+	return count;							\
+}
+
+ATTR_STORE_FN(disabled_keys, EV_KEY);
+ATTR_STORE_FN(disabled_switches, EV_SW);
+
+/*
+ * ATTRIBUTES:
+ *
+ * /sys/devices/platform/gpio-keys/disabled_keys [rw]
+ * /sys/devices/platform/gpio-keys/disables_switches [rw]
+ */
+static DEVICE_ATTR(disabled_keys, S_IWUSR | S_IRUGO,
+		   gpio_keys_show_disabled_keys,
+		   gpio_keys_store_disabled_keys);
+static DEVICE_ATTR(disabled_switches, S_IWUSR | S_IRUGO,
+		   gpio_keys_show_disabled_switches,
+		   gpio_keys_store_disabled_switches);
+
+static struct attribute *gpio_keys_attrs[] = {
+	&dev_attr_keys.attr,
+	&dev_attr_switches.attr,
+	&dev_attr_disabled_keys.attr,
+	&dev_attr_disabled_switches.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(gpio_keys);
+
+static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)
+{
+	const struct gpio_keys_button *button = bdata->button;
+	struct input_dev *input = bdata->input;
+	unsigned int type = button->type ?: EV_KEY;
+	int state;
+
+	state = gpiod_get_value_cansleep(bdata->gpiod);
+	if (state < 0) {
+		dev_err(input->dev.parent,
+			"failed to get gpio state: %d\n", state);
+		return;
+	}
+
+	if (type == EV_ABS) {
+		if (state)
+			input_event(input, type, button->code, button->value);
+	} else {
+		input_event(input, type, *bdata->code, state);
+	}
+	input_sync(input);
+}
+
+static void gpio_keys_gpio_work_func(struct work_struct *work)
+{
+	struct gpio_button_data *bdata =
+		container_of(work, struct gpio_button_data, work.work);
+
+	gpio_keys_gpio_report_event(bdata);
+
+	if (bdata->button->wakeup)
+		pm_relax(bdata->input->dev.parent);
+}
+
+static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
+{
+	struct gpio_button_data *bdata = dev_id;
+
+	BUG_ON(irq != bdata->irq);
+
+	if (bdata->button->wakeup) {
+		const struct gpio_keys_button *button = bdata->button;
+
+		pm_stay_awake(bdata->input->dev.parent);
+		if (bdata->suspended  &&
+		    (button->type == 0 || button->type == EV_KEY)) {
+			/*
+			 * Simulate wakeup key press in case the key has
+			 * already released by the time we got interrupt
+			 * handler to run.
+			 */
+			input_report_key(bdata->input, button->code, 1);
+		}
+	}
+
+	mod_delayed_work(system_wq,
+			 &bdata->work,
+			 msecs_to_jiffies(bdata->software_debounce));
+
+	return IRQ_HANDLED;
+}
+
+static void gpio_keys_irq_timer(struct timer_list *t)
+{
+	struct gpio_button_data *bdata = from_timer(bdata, t, release_timer);
+	struct input_dev *input = bdata->input;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bdata->lock, flags);
+	if (bdata->key_pressed) {
+		input_event(input, EV_KEY, *bdata->code, 0);
+		input_sync(input);
+		bdata->key_pressed = false;
+	}
+	spin_unlock_irqrestore(&bdata->lock, flags);
+}
+
+static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
+{
+	struct gpio_button_data *bdata = dev_id;
+	struct input_dev *input = bdata->input;
+	unsigned long flags;
+
+	BUG_ON(irq != bdata->irq);
+
+	spin_lock_irqsave(&bdata->lock, flags);
+
+	if (!bdata->key_pressed) {
+		if (bdata->button->wakeup)
+			pm_wakeup_event(bdata->input->dev.parent, 0);
+
+		input_event(input, EV_KEY, *bdata->code, 1);
+		input_sync(input);
+
+		if (!bdata->release_delay) {
+			input_event(input, EV_KEY, *bdata->code, 0);
+			input_sync(input);
+			goto out;
+		}
+
+		bdata->key_pressed = true;
+	}
+
+	if (bdata->release_delay)
+		mod_timer(&bdata->release_timer,
+			jiffies + msecs_to_jiffies(bdata->release_delay));
+out:
+	spin_unlock_irqrestore(&bdata->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static void gpio_keys_quiesce_key(void *data)
+{
+	struct gpio_button_data *bdata = data;
+
+	if (bdata->gpiod)
+		cancel_delayed_work_sync(&bdata->work);
+	else
+		del_timer_sync(&bdata->release_timer);
+}
+
+static int gpio_keys_setup_key(struct platform_device *pdev,
+				struct input_dev *input,
+				struct gpio_keys_drvdata *ddata,
+				const struct gpio_keys_button *button,
+				int idx,
+				struct fwnode_handle *child)
+{
+	const char *desc = button->desc ? button->desc : "gpio_keys";
+	struct device *dev = &pdev->dev;
+	struct gpio_button_data *bdata = &ddata->data[idx];
+	irq_handler_t isr;
+	unsigned long irqflags;
+	int irq;
+	int error;
+
+	bdata->input = input;
+	bdata->button = button;
+	spin_lock_init(&bdata->lock);
+
+	if (child) {
+		bdata->gpiod = devm_fwnode_gpiod_get(dev, child,
+						     NULL, GPIOD_IN, desc);
+		if (IS_ERR(bdata->gpiod)) {
+			error = PTR_ERR(bdata->gpiod);
+			if (error == -ENOENT) {
+				/*
+				 * GPIO is optional, we may be dealing with
+				 * purely interrupt-driven setup.
+				 */
+				bdata->gpiod = NULL;
+			} else {
+				if (error != -EPROBE_DEFER)
+					dev_err(dev, "failed to get gpio: %d\n",
+						error);
+				return error;
+			}
+		}
+	} else if (gpio_is_valid(button->gpio)) {
+		/*
+		 * Legacy GPIO number, so request the GPIO here and
+		 * convert it to descriptor.
+		 */
+		unsigned flags = GPIOF_IN;
+
+		if (button->active_low)
+			flags |= GPIOF_ACTIVE_LOW;
+
+		error = devm_gpio_request_one(dev, button->gpio, flags, desc);
+		if (error < 0) {
+			dev_err(dev, "Failed to request GPIO %d, error %d\n",
+				button->gpio, error);
+			return error;
+		}
+
+		bdata->gpiod = gpio_to_desc(button->gpio);
+		if (!bdata->gpiod)
+			return -EINVAL;
+	}
+
+	if (bdata->gpiod) {
+		bool active_low = gpiod_is_active_low(bdata->gpiod);
+
+		if (button->debounce_interval) {
+			error = gpiod_set_debounce(bdata->gpiod,
+					button->debounce_interval * 1000);
+			/* use timer if gpiolib doesn't provide debounce */
+			if (error < 0)
+				bdata->software_debounce =
+						button->debounce_interval;
+		}
+
+		if (button->irq) {
+			bdata->irq = button->irq;
+		} else {
+			irq = gpiod_to_irq(bdata->gpiod);
+			if (irq < 0) {
+				error = irq;
+				dev_err(dev,
+					"Unable to get irq number for GPIO %d, error %d\n",
+					button->gpio, error);
+				return error;
+			}
+			bdata->irq = irq;
+		}
+
+		INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
+
+		isr = gpio_keys_gpio_isr;
+		irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
+
+		switch (button->wakeup_event_action) {
+		case EV_ACT_ASSERTED:
+			bdata->wakeup_trigger_type = active_low ?
+				IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING;
+			break;
+		case EV_ACT_DEASSERTED:
+			bdata->wakeup_trigger_type = active_low ?
+				IRQ_TYPE_EDGE_RISING : IRQ_TYPE_EDGE_FALLING;
+			break;
+		case EV_ACT_ANY:
+		default:
+			/*
+			 * For other cases, we are OK letting suspend/resume
+			 * not reconfigure the trigger type.
+			 */
+			break;
+		}
+	} else {
+		if (!button->irq) {
+			dev_err(dev, "Found button without gpio or irq\n");
+			return -EINVAL;
+		}
+
+		bdata->irq = button->irq;
+
+		if (button->type && button->type != EV_KEY) {
+			dev_err(dev, "Only EV_KEY allowed for IRQ buttons.\n");
+			return -EINVAL;
+		}
+
+		bdata->release_delay = button->debounce_interval;
+		timer_setup(&bdata->release_timer, gpio_keys_irq_timer, 0);
+
+		isr = gpio_keys_irq_isr;
+		irqflags = 0;
+
+		/*
+		 * For IRQ buttons, there is no interrupt for release.
+		 * So we don't need to reconfigure the trigger type for wakeup.
+		 */
+	}
+
+	bdata->code = &ddata->keymap[idx];
+	*bdata->code = button->code;
+	input_set_capability(input, button->type ?: EV_KEY, *bdata->code);
+
+	/*
+	 * Install custom action to cancel release timer and
+	 * workqueue item.
+	 */
+	error = devm_add_action(dev, gpio_keys_quiesce_key, bdata);
+	if (error) {
+		dev_err(dev, "failed to register quiesce action, error: %d\n",
+			error);
+		return error;
+	}
+
+	/*
+	 * If platform has specified that the button can be disabled,
+	 * we don't want it to share the interrupt line.
+	 */
+	if (!button->can_disable)
+		irqflags |= IRQF_SHARED;
+
+	error = devm_request_any_context_irq(dev, bdata->irq, isr, irqflags,
+					     desc, bdata);
+	if (error < 0) {
+		dev_err(dev, "Unable to claim irq %d; error %d\n",
+			bdata->irq, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static void gpio_keys_report_state(struct gpio_keys_drvdata *ddata)
+{
+	struct input_dev *input = ddata->input;
+	int i;
+
+	for (i = 0; i < ddata->pdata->nbuttons; i++) {
+		struct gpio_button_data *bdata = &ddata->data[i];
+		if (bdata->gpiod)
+			gpio_keys_gpio_report_event(bdata);
+	}
+	input_sync(input);
+}
+
+static int gpio_keys_open(struct input_dev *input)
+{
+	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
+	const struct gpio_keys_platform_data *pdata = ddata->pdata;
+	int error;
+
+	if (pdata->enable) {
+		error = pdata->enable(input->dev.parent);
+		if (error)
+			return error;
+	}
+
+	/* Report current state of buttons that are connected to GPIOs */
+	gpio_keys_report_state(ddata);
+
+	return 0;
+}
+
+static void gpio_keys_close(struct input_dev *input)
+{
+	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
+	const struct gpio_keys_platform_data *pdata = ddata->pdata;
+
+	if (pdata->disable)
+		pdata->disable(input->dev.parent);
+}
+
+/*
+ * Handlers for alternative sources of platform_data
+ */
+
+/*
+ * Translate properties into platform_data
+ */
+static struct gpio_keys_platform_data *
+gpio_keys_get_devtree_pdata(struct device *dev)
+{
+	struct gpio_keys_platform_data *pdata;
+	struct gpio_keys_button *button;
+	struct fwnode_handle *child;
+	int nbuttons;
+
+	nbuttons = device_get_child_node_count(dev);
+	if (nbuttons == 0)
+		return ERR_PTR(-ENODEV);
+
+	pdata = devm_kzalloc(dev,
+			     sizeof(*pdata) + nbuttons * sizeof(*button),
+			     GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	button = (struct gpio_keys_button *)(pdata + 1);
+
+	pdata->buttons = button;
+	pdata->nbuttons = nbuttons;
+
+	pdata->rep = device_property_read_bool(dev, "autorepeat");
+
+	device_property_read_string(dev, "label", &pdata->name);
+
+	device_for_each_child_node(dev, child) {
+		if (is_of_node(child))
+			button->irq =
+				irq_of_parse_and_map(to_of_node(child), 0);
+
+		if (fwnode_property_read_u32(child, "linux,code",
+					     &button->code)) {
+			dev_err(dev, "Button without keycode\n");
+			fwnode_handle_put(child);
+			return ERR_PTR(-EINVAL);
+		}
+
+		fwnode_property_read_string(child, "label", &button->desc);
+
+		if (fwnode_property_read_u32(child, "linux,input-type",
+					     &button->type))
+			button->type = EV_KEY;
+
+		button->wakeup =
+			fwnode_property_read_bool(child, "wakeup-source") ||
+			/* legacy name */
+			fwnode_property_read_bool(child, "gpio-key,wakeup");
+
+		fwnode_property_read_u32(child, "wakeup-event-action",
+					 &button->wakeup_event_action);
+
+		button->can_disable =
+			fwnode_property_read_bool(child, "linux,can-disable");
+
+		if (fwnode_property_read_u32(child, "debounce-interval",
+					 &button->debounce_interval))
+			button->debounce_interval = 5;
+
+		button++;
+	}
+
+	return pdata;
+}
+
+static const struct of_device_id gpio_keys_of_match[] = {
+	{ .compatible = "gpio-keys", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, gpio_keys_of_match);
+
+static int gpio_keys_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct gpio_keys_platform_data *pdata = dev_get_platdata(dev);
+	struct fwnode_handle *child = NULL;
+	struct gpio_keys_drvdata *ddata;
+	struct input_dev *input;
+	int i, error;
+	int wakeup = 0;
+
+	if (!pdata) {
+		pdata = gpio_keys_get_devtree_pdata(dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
+	ddata = devm_kzalloc(dev, struct_size(ddata, data, pdata->nbuttons),
+			     GFP_KERNEL);
+	if (!ddata) {
+		dev_err(dev, "failed to allocate state\n");
+		return -ENOMEM;
+	}
+
+	ddata->keymap = devm_kcalloc(dev,
+				     pdata->nbuttons, sizeof(ddata->keymap[0]),
+				     GFP_KERNEL);
+	if (!ddata->keymap)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	ddata->pdata = pdata;
+	ddata->input = input;
+	mutex_init(&ddata->disable_lock);
+
+	platform_set_drvdata(pdev, ddata);
+	input_set_drvdata(input, ddata);
+
+	input->name = pdata->name ? : pdev->name;
+	input->phys = "gpio-keys/input0";
+	input->dev.parent = dev;
+	input->open = gpio_keys_open;
+	input->close = gpio_keys_close;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	input->keycode = ddata->keymap;
+	input->keycodesize = sizeof(ddata->keymap[0]);
+	input->keycodemax = pdata->nbuttons;
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (pdata->rep)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		const struct gpio_keys_button *button = &pdata->buttons[i];
+
+		if (!dev_get_platdata(dev)) {
+			child = device_get_next_child_node(dev, child);
+			if (!child) {
+				dev_err(dev,
+					"missing child device node for entry %d\n",
+					i);
+				return -EINVAL;
+			}
+		}
+
+		error = gpio_keys_setup_key(pdev, input, ddata,
+					    button, i, child);
+		if (error) {
+			fwnode_handle_put(child);
+			return error;
+		}
+
+		if (button->wakeup)
+			wakeup = 1;
+	}
+
+	fwnode_handle_put(child);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "Unable to register input device, error: %d\n",
+			error);
+		return error;
+	}
+
+	device_init_wakeup(dev, wakeup);
+
+	return 0;
+}
+
+static int __maybe_unused
+gpio_keys_button_enable_wakeup(struct gpio_button_data *bdata)
+{
+	int error;
+
+	error = enable_irq_wake(bdata->irq);
+	if (error) {
+		dev_err(bdata->input->dev.parent,
+			"failed to configure IRQ %d as wakeup source: %d\n",
+			bdata->irq, error);
+		return error;
+	}
+
+	if (bdata->wakeup_trigger_type) {
+		error = irq_set_irq_type(bdata->irq,
+					 bdata->wakeup_trigger_type);
+		if (error) {
+			dev_err(bdata->input->dev.parent,
+				"failed to set wakeup trigger %08x for IRQ %d: %d\n",
+				bdata->wakeup_trigger_type, bdata->irq, error);
+			disable_irq_wake(bdata->irq);
+			return error;
+		}
+	}
+
+	return 0;
+}
+
+static void __maybe_unused
+gpio_keys_button_disable_wakeup(struct gpio_button_data *bdata)
+{
+	int error;
+
+	/*
+	 * The trigger type is always both edges for gpio-based keys and we do
+	 * not support changing wakeup trigger for interrupt-based keys.
+	 */
+	if (bdata->wakeup_trigger_type) {
+		error = irq_set_irq_type(bdata->irq, IRQ_TYPE_EDGE_BOTH);
+		if (error)
+			dev_warn(bdata->input->dev.parent,
+				 "failed to restore interrupt trigger for IRQ %d: %d\n",
+				 bdata->irq, error);
+	}
+
+	error = disable_irq_wake(bdata->irq);
+	if (error)
+		dev_warn(bdata->input->dev.parent,
+			 "failed to disable IRQ %d as wake source: %d\n",
+			 bdata->irq, error);
+}
+
+static int __maybe_unused
+gpio_keys_enable_wakeup(struct gpio_keys_drvdata *ddata)
+{
+	struct gpio_button_data *bdata;
+	int error;
+	int i;
+
+	for (i = 0; i < ddata->pdata->nbuttons; i++) {
+		bdata = &ddata->data[i];
+		if (bdata->button->wakeup) {
+			error = gpio_keys_button_enable_wakeup(bdata);
+			if (error)
+				goto err_out;
+		}
+		bdata->suspended = true;
+	}
+
+	return 0;
+
+err_out:
+	while (i--) {
+		bdata = &ddata->data[i];
+		if (bdata->button->wakeup)
+			gpio_keys_button_disable_wakeup(bdata);
+		bdata->suspended = false;
+	}
+
+	return error;
+}
+
+static void __maybe_unused
+gpio_keys_disable_wakeup(struct gpio_keys_drvdata *ddata)
+{
+	struct gpio_button_data *bdata;
+	int i;
+
+	for (i = 0; i < ddata->pdata->nbuttons; i++) {
+		bdata = &ddata->data[i];
+		bdata->suspended = false;
+		if (irqd_is_wakeup_set(irq_get_irq_data(bdata->irq)))
+			gpio_keys_button_disable_wakeup(bdata);
+	}
+}
+
+static int __maybe_unused gpio_keys_suspend(struct device *dev)
+{
+	struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
+	struct input_dev *input = ddata->input;
+	int error;
+
+	if (device_may_wakeup(dev)) {
+		error = gpio_keys_enable_wakeup(ddata);
+		if (error)
+			return error;
+	} else {
+		mutex_lock(&input->mutex);
+		if (input->users)
+			gpio_keys_close(input);
+		mutex_unlock(&input->mutex);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused gpio_keys_resume(struct device *dev)
+{
+	struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
+	struct input_dev *input = ddata->input;
+	int error = 0;
+
+	if (device_may_wakeup(dev)) {
+		gpio_keys_disable_wakeup(ddata);
+	} else {
+		mutex_lock(&input->mutex);
+		if (input->users)
+			error = gpio_keys_open(input);
+		mutex_unlock(&input->mutex);
+	}
+
+	if (error)
+		return error;
+
+	gpio_keys_report_state(ddata);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume);
+
+static void gpio_keys_shutdown(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = gpio_keys_suspend(&pdev->dev);
+	if (ret)
+		dev_err(&pdev->dev, "failed to shutdown\n");
+}
+
+static struct platform_driver gpio_keys_device_driver = {
+	.probe		= gpio_keys_probe,
+	.shutdown	= gpio_keys_shutdown,
+	.driver		= {
+		.name	= "gpio-keys",
+		.pm	= &gpio_keys_pm_ops,
+		.of_match_table = gpio_keys_of_match,
+		.dev_groups	= gpio_keys_groups,
+	}
+};
+
+static int __init gpio_keys_init(void)
+{
+	return platform_driver_register(&gpio_keys_device_driver);
+}
+
+static void __exit gpio_keys_exit(void)
+{
+	platform_driver_unregister(&gpio_keys_device_driver);
+}
+
+late_initcall(gpio_keys_init);
+module_exit(gpio_keys_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>");
+MODULE_DESCRIPTION("Keyboard driver for GPIOs");
+MODULE_ALIAS("platform:gpio-keys");
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
new file mode 100644
index 000000000..c3937d2fc
--- /dev/null
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ *  This file was based on: /drivers/input/misc/cobalt_btns.c
+ *	Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  also was based on: /drivers/input/keyboard/gpio_keys.c
+ *	Copyright 2005 Phil Blundell
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio_keys.h>
+#include <linux/property.h>
+
+#define DRV_NAME	"gpio-keys-polled"
+
+struct gpio_keys_button_data {
+	struct gpio_desc *gpiod;
+	int last_state;
+	int count;
+	int threshold;
+};
+
+struct gpio_keys_polled_dev {
+	struct input_dev *input;
+	struct device *dev;
+	const struct gpio_keys_platform_data *pdata;
+	unsigned long rel_axis_seen[BITS_TO_LONGS(REL_CNT)];
+	unsigned long abs_axis_seen[BITS_TO_LONGS(ABS_CNT)];
+	struct gpio_keys_button_data data[];
+};
+
+static void gpio_keys_button_event(struct input_dev *input,
+				   const struct gpio_keys_button *button,
+				   int state)
+{
+	struct gpio_keys_polled_dev *bdev = input_get_drvdata(input);
+	unsigned int type = button->type ?: EV_KEY;
+
+	if (type == EV_REL) {
+		if (state) {
+			input_event(input, type, button->code, button->value);
+			__set_bit(button->code, bdev->rel_axis_seen);
+		}
+	} else if (type == EV_ABS) {
+		if (state) {
+			input_event(input, type, button->code, button->value);
+			__set_bit(button->code, bdev->abs_axis_seen);
+		}
+	} else {
+		input_event(input, type, button->code, state);
+		input_sync(input);
+	}
+}
+
+static void gpio_keys_polled_check_state(struct input_dev *input,
+					 const struct gpio_keys_button *button,
+					 struct gpio_keys_button_data *bdata)
+{
+	int state;
+
+	state = gpiod_get_value_cansleep(bdata->gpiod);
+	if (state < 0) {
+		dev_err(input->dev.parent,
+			"failed to get gpio state: %d\n", state);
+	} else {
+		gpio_keys_button_event(input, button, state);
+
+		if (state != bdata->last_state) {
+			bdata->count = 0;
+			bdata->last_state = state;
+		}
+	}
+}
+
+static void gpio_keys_polled_poll(struct input_dev *input)
+{
+	struct gpio_keys_polled_dev *bdev = input_get_drvdata(input);
+	const struct gpio_keys_platform_data *pdata = bdev->pdata;
+	int i;
+
+	memset(bdev->rel_axis_seen, 0, sizeof(bdev->rel_axis_seen));
+	memset(bdev->abs_axis_seen, 0, sizeof(bdev->abs_axis_seen));
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		struct gpio_keys_button_data *bdata = &bdev->data[i];
+
+		if (bdata->count < bdata->threshold) {
+			bdata->count++;
+			gpio_keys_button_event(input, &pdata->buttons[i],
+					       bdata->last_state);
+		} else {
+			gpio_keys_polled_check_state(input, &pdata->buttons[i],
+						     bdata);
+		}
+	}
+
+	for_each_set_bit(i, input->relbit, REL_CNT) {
+		if (!test_bit(i, bdev->rel_axis_seen))
+			input_event(input, EV_REL, i, 0);
+	}
+
+	for_each_set_bit(i, input->absbit, ABS_CNT) {
+		if (!test_bit(i, bdev->abs_axis_seen))
+			input_event(input, EV_ABS, i, 0);
+	}
+
+	input_sync(input);
+}
+
+static int gpio_keys_polled_open(struct input_dev *input)
+{
+	struct gpio_keys_polled_dev *bdev = input_get_drvdata(input);
+	const struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+	if (pdata->enable)
+		pdata->enable(bdev->dev);
+
+	return 0;
+}
+
+static void gpio_keys_polled_close(struct input_dev *input)
+{
+	struct gpio_keys_polled_dev *bdev = input_get_drvdata(input);
+	const struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+	if (pdata->disable)
+		pdata->disable(bdev->dev);
+}
+
+static struct gpio_keys_platform_data *
+gpio_keys_polled_get_devtree_pdata(struct device *dev)
+{
+	struct gpio_keys_platform_data *pdata;
+	struct gpio_keys_button *button;
+	struct fwnode_handle *child;
+	int nbuttons;
+
+	nbuttons = device_get_child_node_count(dev);
+	if (nbuttons == 0)
+		return ERR_PTR(-EINVAL);
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata) + nbuttons * sizeof(*button),
+			     GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	button = (struct gpio_keys_button *)(pdata + 1);
+
+	pdata->buttons = button;
+	pdata->nbuttons = nbuttons;
+
+	pdata->rep = device_property_present(dev, "autorepeat");
+	device_property_read_u32(dev, "poll-interval", &pdata->poll_interval);
+
+	device_property_read_string(dev, "label", &pdata->name);
+
+	device_for_each_child_node(dev, child) {
+		if (fwnode_property_read_u32(child, "linux,code",
+					     &button->code)) {
+			dev_err(dev, "button without keycode\n");
+			fwnode_handle_put(child);
+			return ERR_PTR(-EINVAL);
+		}
+
+		fwnode_property_read_string(child, "label", &button->desc);
+
+		if (fwnode_property_read_u32(child, "linux,input-type",
+					     &button->type))
+			button->type = EV_KEY;
+
+		if (fwnode_property_read_u32(child, "linux,input-value",
+					     (u32 *)&button->value))
+			button->value = 1;
+
+		button->wakeup =
+			fwnode_property_read_bool(child, "wakeup-source") ||
+			/* legacy name */
+			fwnode_property_read_bool(child, "gpio-key,wakeup");
+
+		if (fwnode_property_read_u32(child, "debounce-interval",
+					     &button->debounce_interval))
+			button->debounce_interval = 5;
+
+		button++;
+	}
+
+	return pdata;
+}
+
+static void gpio_keys_polled_set_abs_params(struct input_dev *input,
+	const struct gpio_keys_platform_data *pdata, unsigned int code)
+{
+	int i, min = 0, max = 0;
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		const struct gpio_keys_button *button = &pdata->buttons[i];
+
+		if (button->type != EV_ABS || button->code != code)
+			continue;
+
+		if (button->value < min)
+			min = button->value;
+		if (button->value > max)
+			max = button->value;
+	}
+
+	input_set_abs_params(input, code, min, max, 0, 0);
+}
+
+static const struct of_device_id gpio_keys_polled_of_match[] = {
+	{ .compatible = "gpio-keys-polled", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, gpio_keys_polled_of_match);
+
+static int gpio_keys_polled_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct fwnode_handle *child = NULL;
+	const struct gpio_keys_platform_data *pdata = dev_get_platdata(dev);
+	struct gpio_keys_polled_dev *bdev;
+	struct input_dev *input;
+	int error;
+	int i;
+
+	if (!pdata) {
+		pdata = gpio_keys_polled_get_devtree_pdata(dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
+	if (!pdata->poll_interval) {
+		dev_err(dev, "missing poll_interval value\n");
+		return -EINVAL;
+	}
+
+	bdev = devm_kzalloc(dev, struct_size(bdev, data, pdata->nbuttons),
+			    GFP_KERNEL);
+	if (!bdev) {
+		dev_err(dev, "no memory for private data\n");
+		return -ENOMEM;
+	}
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "no memory for input device\n");
+		return -ENOMEM;
+	}
+
+	input_set_drvdata(input, bdev);
+
+	input->name = pdata->name ?: pdev->name;
+	input->phys = DRV_NAME"/input0";
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	input->open = gpio_keys_polled_open;
+	input->close = gpio_keys_polled_close;
+
+	__set_bit(EV_KEY, input->evbit);
+	if (pdata->rep)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		const struct gpio_keys_button *button = &pdata->buttons[i];
+		struct gpio_keys_button_data *bdata = &bdev->data[i];
+		unsigned int type = button->type ?: EV_KEY;
+
+		if (button->wakeup) {
+			dev_err(dev, DRV_NAME " does not support wakeup\n");
+			fwnode_handle_put(child);
+			return -EINVAL;
+		}
+
+		if (!dev_get_platdata(dev)) {
+			/* No legacy static platform data */
+			child = device_get_next_child_node(dev, child);
+			if (!child) {
+				dev_err(dev, "missing child device node\n");
+				return -EINVAL;
+			}
+
+			bdata->gpiod = devm_fwnode_gpiod_get(dev, child,
+							     NULL, GPIOD_IN,
+							     button->desc);
+			if (IS_ERR(bdata->gpiod)) {
+				error = PTR_ERR(bdata->gpiod);
+				if (error != -EPROBE_DEFER)
+					dev_err(dev,
+						"failed to get gpio: %d\n",
+						error);
+				fwnode_handle_put(child);
+				return error;
+			}
+		} else if (gpio_is_valid(button->gpio)) {
+			/*
+			 * Legacy GPIO number so request the GPIO here and
+			 * convert it to descriptor.
+			 */
+			unsigned flags = GPIOF_IN;
+
+			if (button->active_low)
+				flags |= GPIOF_ACTIVE_LOW;
+
+			error = devm_gpio_request_one(dev, button->gpio,
+					flags, button->desc ? : DRV_NAME);
+			if (error) {
+				dev_err(dev,
+					"unable to claim gpio %u, err=%d\n",
+					button->gpio, error);
+				return error;
+			}
+
+			bdata->gpiod = gpio_to_desc(button->gpio);
+			if (!bdata->gpiod) {
+				dev_err(dev,
+					"unable to convert gpio %u to descriptor\n",
+					button->gpio);
+				return -EINVAL;
+			}
+		}
+
+		bdata->last_state = -1;
+		bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
+						pdata->poll_interval);
+
+		input_set_capability(input, type, button->code);
+		if (type == EV_ABS)
+			gpio_keys_polled_set_abs_params(input, pdata,
+							button->code);
+	}
+
+	fwnode_handle_put(child);
+
+	bdev->input = input;
+	bdev->dev = dev;
+	bdev->pdata = pdata;
+
+	error = input_setup_polling(input, gpio_keys_polled_poll);
+	if (error) {
+		dev_err(dev, "unable to set up polling, err=%d\n", error);
+		return error;
+	}
+
+	input_set_poll_interval(input, pdata->poll_interval);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "unable to register polled device, err=%d\n",
+			error);
+		return error;
+	}
+
+	/* report initial state of the buttons */
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_keys_polled_check_state(input, &pdata->buttons[i],
+					     &bdev->data[i]);
+
+	input_sync(input);
+
+	return 0;
+}
+
+static struct platform_driver gpio_keys_polled_driver = {
+	.probe	= gpio_keys_polled_probe,
+	.driver	= {
+		.name	= DRV_NAME,
+		.of_match_table = gpio_keys_polled_of_match,
+	},
+};
+module_platform_driver(gpio_keys_polled_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Polled GPIO Buttons driver");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
new file mode 100644
index 000000000..54afb3860
--- /dev/null
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -0,0 +1,586 @@
+/*
+ * Generic linux-input device driver for keyboard devices
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ *
+ */
+
+#include <linux/hil.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/slab.h>
+#include <linux/pci_ids.h>
+
+#define PREFIX "HIL: "
+
+MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
+MODULE_DESCRIPTION("HIL keyboard/mouse driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("serio:ty03pr25id00ex*"); /* HIL keyboard */
+MODULE_ALIAS("serio:ty03pr25id0Fex*"); /* HIL mouse */
+
+#define HIL_PACKET_MAX_LENGTH 16
+
+#define HIL_KBD_SET1_UPBIT 0x01
+#define HIL_KBD_SET1_SHIFT 1
+static unsigned int hil_kbd_set1[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly =
+	{ HIL_KEYCODES_SET1 };
+
+#define HIL_KBD_SET2_UPBIT 0x01
+#define HIL_KBD_SET2_SHIFT 1
+/* Set2 is user defined */
+
+#define HIL_KBD_SET3_UPBIT 0x80
+#define HIL_KBD_SET3_SHIFT 0
+static unsigned int hil_kbd_set3[HIL_KEYCODES_SET3_TBLSIZE] __read_mostly =
+	{ HIL_KEYCODES_SET3 };
+
+static const char hil_language[][16] = { HIL_LOCALE_MAP };
+
+struct hil_dev {
+	struct input_dev *dev;
+	struct serio *serio;
+
+	/* Input buffer and index for packets from HIL bus. */
+	hil_packet data[HIL_PACKET_MAX_LENGTH];
+	int idx4; /* four counts per packet */
+
+	/* Raw device info records from HIL bus, see hil.h for fields. */
+	char	idd[HIL_PACKET_MAX_LENGTH];	/* DID byte and IDD record */
+	char	rsc[HIL_PACKET_MAX_LENGTH];	/* RSC record */
+	char	exd[HIL_PACKET_MAX_LENGTH];	/* EXD record */
+	char	rnm[HIL_PACKET_MAX_LENGTH + 1];	/* RNM record + NULL term. */
+
+	struct completion cmd_done;
+
+	bool is_pointer;
+	/* Extra device details needed for pointing devices. */
+	unsigned int nbtn, naxes;
+	unsigned int btnmap[7];
+};
+
+static bool hil_dev_is_command_response(hil_packet p)
+{
+	if ((p & ~HIL_CMDCT_POL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL))
+		return false;
+
+	if ((p & ~HIL_CMDCT_RPL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL))
+		return false;
+
+	return true;
+}
+
+static void hil_dev_handle_command_response(struct hil_dev *dev)
+{
+	hil_packet p;
+	char *buf;
+	int i, idx;
+
+	idx = dev->idx4 / 4;
+	p = dev->data[idx - 1];
+
+	switch (p & HIL_PKT_DATA_MASK) {
+	case HIL_CMD_IDD:
+		buf = dev->idd;
+		break;
+
+	case HIL_CMD_RSC:
+		buf = dev->rsc;
+		break;
+
+	case HIL_CMD_EXD:
+		buf = dev->exd;
+		break;
+
+	case HIL_CMD_RNM:
+		dev->rnm[HIL_PACKET_MAX_LENGTH] = 0;
+		buf = dev->rnm;
+		break;
+
+	default:
+		/* These occur when device isn't present */
+		if (p != (HIL_ERR_INT | HIL_PKT_CMD)) {
+			/* Anything else we'd like to know about. */
+			printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p);
+		}
+		goto out;
+	}
+
+	for (i = 0; i < idx; i++)
+		buf[i] = dev->data[i] & HIL_PKT_DATA_MASK;
+	for (; i < HIL_PACKET_MAX_LENGTH; i++)
+		buf[i] = 0;
+ out:
+	complete(&dev->cmd_done);
+}
+
+static void hil_dev_handle_kbd_events(struct hil_dev *kbd)
+{
+	struct input_dev *dev = kbd->dev;
+	int idx = kbd->idx4 / 4;
+	int i;
+
+	switch (kbd->data[0] & HIL_POL_CHARTYPE_MASK) {
+	case HIL_POL_CHARTYPE_NONE:
+		return;
+
+	case HIL_POL_CHARTYPE_ASCII:
+		for (i = 1; i < idx - 1; i++)
+			input_report_key(dev, kbd->data[i] & 0x7f, 1);
+		break;
+
+	case HIL_POL_CHARTYPE_RSVD1:
+	case HIL_POL_CHARTYPE_RSVD2:
+	case HIL_POL_CHARTYPE_BINARY:
+		for (i = 1; i < idx - 1; i++)
+			input_report_key(dev, kbd->data[i], 1);
+		break;
+
+	case HIL_POL_CHARTYPE_SET1:
+		for (i = 1; i < idx - 1; i++) {
+			unsigned int key = kbd->data[i];
+			int up = key & HIL_KBD_SET1_UPBIT;
+
+			key &= (~HIL_KBD_SET1_UPBIT & 0xff);
+			key = hil_kbd_set1[key >> HIL_KBD_SET1_SHIFT];
+			input_report_key(dev, key, !up);
+		}
+		break;
+
+	case HIL_POL_CHARTYPE_SET2:
+		for (i = 1; i < idx - 1; i++) {
+			unsigned int key = kbd->data[i];
+			int up = key & HIL_KBD_SET2_UPBIT;
+
+			key &= (~HIL_KBD_SET1_UPBIT & 0xff);
+			key = key >> HIL_KBD_SET2_SHIFT;
+			input_report_key(dev, key, !up);
+		}
+		break;
+
+	case HIL_POL_CHARTYPE_SET3:
+		for (i = 1; i < idx - 1; i++) {
+			unsigned int key = kbd->data[i];
+			int up = key & HIL_KBD_SET3_UPBIT;
+
+			key &= (~HIL_KBD_SET1_UPBIT & 0xff);
+			key = hil_kbd_set3[key >> HIL_KBD_SET3_SHIFT];
+			input_report_key(dev, key, !up);
+		}
+		break;
+	}
+
+	input_sync(dev);
+}
+
+static void hil_dev_handle_ptr_events(struct hil_dev *ptr)
+{
+	struct input_dev *dev = ptr->dev;
+	int idx = ptr->idx4 / 4;
+	hil_packet p = ptr->data[idx - 1];
+	int i, cnt, laxis;
+	bool absdev, ax16;
+
+	if ((p & HIL_CMDCT_POL) != idx - 1) {
+		printk(KERN_WARNING PREFIX
+			"Malformed poll packet %x (idx = %i)\n", p, idx);
+		return;
+	}
+
+	i = (p & HIL_POL_AXIS_ALT) ? 3 : 0;
+	laxis = (p & HIL_POL_NUM_AXES_MASK) + i;
+
+	ax16 = ptr->idd[1] & HIL_IDD_HEADER_16BIT; /* 8 or 16bit resolution */
+	absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS;
+
+	for (cnt = 1; i < laxis; i++) {
+		unsigned int lo, hi, val;
+
+		lo = ptr->data[cnt++] & HIL_PKT_DATA_MASK;
+		hi = ax16 ? (ptr->data[cnt++] & HIL_PKT_DATA_MASK) : 0;
+
+		if (absdev) {
+			val = lo + (hi << 8);
+#ifdef TABLET_AUTOADJUST
+			if (val < input_abs_get_min(dev, ABS_X + i))
+				input_abs_set_min(dev, ABS_X + i, val);
+			if (val > input_abs_get_max(dev, ABS_X + i))
+				input_abs_set_max(dev, ABS_X + i, val);
+#endif
+			if (i % 3)
+				val = input_abs_get_max(dev, ABS_X + i) - val;
+			input_report_abs(dev, ABS_X + i, val);
+		} else {
+			val = (int) (((int8_t) lo) | ((int8_t) hi << 8));
+			if (i % 3)
+				val *= -1;
+			input_report_rel(dev, REL_X + i, val);
+		}
+	}
+
+	while (cnt < idx - 1) {
+		unsigned int btn = ptr->data[cnt++];
+		int up = btn & 1;
+
+		btn &= 0xfe;
+		if (btn == 0x8e)
+			continue; /* TODO: proximity == touch? */
+		if (btn > 0x8c || btn < 0x80)
+			continue;
+		btn = (btn - 0x80) >> 1;
+		btn = ptr->btnmap[btn];
+		input_report_key(dev, btn, !up);
+	}
+
+	input_sync(dev);
+}
+
+static void hil_dev_process_err(struct hil_dev *dev)
+{
+	printk(KERN_WARNING PREFIX "errored HIL packet\n");
+	dev->idx4 = 0;
+	complete(&dev->cmd_done); /* just in case somebody is waiting */
+}
+
+static irqreturn_t hil_dev_interrupt(struct serio *serio,
+				unsigned char data, unsigned int flags)
+{
+	struct hil_dev *dev;
+	hil_packet packet;
+	int idx;
+
+	dev = serio_get_drvdata(serio);
+	BUG_ON(dev == NULL);
+
+	if (dev->idx4 >= HIL_PACKET_MAX_LENGTH * sizeof(hil_packet)) {
+		hil_dev_process_err(dev);
+		goto out;
+	}
+
+	idx = dev->idx4 / 4;
+	if (!(dev->idx4 % 4))
+		dev->data[idx] = 0;
+	packet = dev->data[idx];
+	packet |= ((hil_packet)data) << ((3 - (dev->idx4 % 4)) * 8);
+	dev->data[idx] = packet;
+
+	/* Records of N 4-byte hil_packets must terminate with a command. */
+	if ((++dev->idx4 % 4) == 0) {
+		if ((packet & 0xffff0000) != HIL_ERR_INT) {
+			hil_dev_process_err(dev);
+		} else if (packet & HIL_PKT_CMD) {
+			if (hil_dev_is_command_response(packet))
+				hil_dev_handle_command_response(dev);
+			else if (dev->is_pointer)
+				hil_dev_handle_ptr_events(dev);
+			else
+				hil_dev_handle_kbd_events(dev);
+			dev->idx4 = 0;
+		}
+	}
+ out:
+	return IRQ_HANDLED;
+}
+
+static void hil_dev_disconnect(struct serio *serio)
+{
+	struct hil_dev *dev = serio_get_drvdata(serio);
+
+	BUG_ON(dev == NULL);
+
+	serio_close(serio);
+	input_unregister_device(dev->dev);
+	serio_set_drvdata(serio, NULL);
+	kfree(dev);
+}
+
+static void hil_dev_keyboard_setup(struct hil_dev *kbd)
+{
+	struct input_dev *input_dev = kbd->dev;
+	uint8_t did = kbd->idd[0];
+	int i;
+
+	input_dev->evbit[0]	= BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->ledbit[0]	= BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
+				  BIT_MASK(LED_SCROLLL);
+
+	for (i = 0; i < 128; i++) {
+		__set_bit(hil_kbd_set1[i], input_dev->keybit);
+		__set_bit(hil_kbd_set3[i], input_dev->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	input_dev->keycodemax	= HIL_KEYCODES_SET1_TBLSIZE;
+	input_dev->keycodesize	= sizeof(hil_kbd_set1[0]);
+	input_dev->keycode	= hil_kbd_set1;
+
+	input_dev->name	= strlen(kbd->rnm) ? kbd->rnm : "HIL keyboard";
+	input_dev->phys	= "hpkbd/input0";
+
+	printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n",
+		did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]);
+}
+
+static void hil_dev_pointer_setup(struct hil_dev *ptr)
+{
+	struct input_dev *input_dev = ptr->dev;
+	uint8_t did = ptr->idd[0];
+	uint8_t *idd = ptr->idd + 1;
+	unsigned int naxsets = HIL_IDD_NUM_AXSETS(*idd);
+	unsigned int i, btntype;
+	const char *txt;
+
+	ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd);
+
+	switch (did & HIL_IDD_DID_TYPE_MASK) {
+	case HIL_IDD_DID_TYPE_REL:
+		input_dev->evbit[0] = BIT_MASK(EV_REL);
+
+		for (i = 0; i < ptr->naxes; i++)
+			__set_bit(REL_X + i, input_dev->relbit);
+
+		for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++)
+			__set_bit(REL_X + i, input_dev->relbit);
+
+		txt = "relative";
+		break;
+
+	case HIL_IDD_DID_TYPE_ABS:
+		input_dev->evbit[0] = BIT_MASK(EV_ABS);
+
+		for (i = 0; i < ptr->naxes; i++)
+			input_set_abs_params(input_dev, ABS_X + i,
+					0, HIL_IDD_AXIS_MAX(idd, i), 0, 0);
+
+		for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++)
+			input_set_abs_params(input_dev, ABS_X + i,
+					0, HIL_IDD_AXIS_MAX(idd, i - 3), 0, 0);
+
+#ifdef TABLET_AUTOADJUST
+		for (i = 0; i < ABS_MAX; i++) {
+			int diff = input_abs_get_max(input_dev, ABS_X + i) / 10;
+			input_abs_set_min(input_dev, ABS_X + i,
+				input_abs_get_min(input_dev, ABS_X + i) + diff);
+			input_abs_set_max(input_dev, ABS_X + i,
+				input_abs_get_max(input_dev, ABS_X + i) - diff);
+		}
+#endif
+
+		txt = "absolute";
+		break;
+
+	default:
+		BUG();
+	}
+
+	ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd);
+	if (ptr->nbtn)
+		input_dev->evbit[0] |= BIT_MASK(EV_KEY);
+
+	btntype = BTN_MISC;
+	if ((did & HIL_IDD_DID_ABS_TABLET_MASK) == HIL_IDD_DID_ABS_TABLET)
+#ifdef TABLET_SIMULATES_MOUSE
+		btntype = BTN_TOUCH;
+#else
+		btntype = BTN_DIGI;
+#endif
+	if ((did & HIL_IDD_DID_ABS_TSCREEN_MASK) == HIL_IDD_DID_ABS_TSCREEN)
+		btntype = BTN_TOUCH;
+
+	if ((did & HIL_IDD_DID_REL_MOUSE_MASK) == HIL_IDD_DID_REL_MOUSE)
+		btntype = BTN_MOUSE;
+
+	for (i = 0; i < ptr->nbtn; i++) {
+		__set_bit(btntype | i, input_dev->keybit);
+		ptr->btnmap[i] = btntype | i;
+	}
+
+	if (btntype == BTN_MOUSE) {
+		/* Swap buttons 2 and 3 */
+		ptr->btnmap[1] = BTN_MIDDLE;
+		ptr->btnmap[2] = BTN_RIGHT;
+	}
+
+	input_dev->name = strlen(ptr->rnm) ? ptr->rnm : "HIL pointer device";
+
+	printk(KERN_INFO PREFIX
+		"HIL pointer device found (did: 0x%02x, axis: %s)\n",
+		did, txt);
+	printk(KERN_INFO PREFIX
+		"HIL pointer has %i buttons and %i sets of %i axes\n",
+		ptr->nbtn, naxsets, ptr->naxes);
+}
+
+static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct hil_dev *dev;
+	struct input_dev *input_dev;
+	uint8_t did, *idd;
+	int error;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!dev || !input_dev) {
+		error = -ENOMEM;
+		goto bail0;
+	}
+
+	dev->serio = serio;
+	dev->dev = input_dev;
+
+	error = serio_open(serio, drv);
+	if (error)
+		goto bail0;
+
+	serio_set_drvdata(serio, dev);
+
+	/* Get device info.  MLC driver supplies devid/status/etc. */
+	init_completion(&dev->cmd_done);
+	serio_write(serio, 0);
+	serio_write(serio, 0);
+	serio_write(serio, HIL_PKT_CMD >> 8);
+	serio_write(serio, HIL_CMD_IDD);
+	error = wait_for_completion_killable(&dev->cmd_done);
+	if (error)
+		goto bail1;
+
+	reinit_completion(&dev->cmd_done);
+	serio_write(serio, 0);
+	serio_write(serio, 0);
+	serio_write(serio, HIL_PKT_CMD >> 8);
+	serio_write(serio, HIL_CMD_RSC);
+	error = wait_for_completion_killable(&dev->cmd_done);
+	if (error)
+		goto bail1;
+
+	reinit_completion(&dev->cmd_done);
+	serio_write(serio, 0);
+	serio_write(serio, 0);
+	serio_write(serio, HIL_PKT_CMD >> 8);
+	serio_write(serio, HIL_CMD_RNM);
+	error = wait_for_completion_killable(&dev->cmd_done);
+	if (error)
+		goto bail1;
+
+	reinit_completion(&dev->cmd_done);
+	serio_write(serio, 0);
+	serio_write(serio, 0);
+	serio_write(serio, HIL_PKT_CMD >> 8);
+	serio_write(serio, HIL_CMD_EXD);
+	error = wait_for_completion_killable(&dev->cmd_done);
+	if (error)
+		goto bail1;
+
+	did = dev->idd[0];
+	idd = dev->idd + 1;
+
+	switch (did & HIL_IDD_DID_TYPE_MASK) {
+	case HIL_IDD_DID_TYPE_KB_INTEGRAL:
+	case HIL_IDD_DID_TYPE_KB_ITF:
+	case HIL_IDD_DID_TYPE_KB_RSVD:
+	case HIL_IDD_DID_TYPE_CHAR:
+		if (HIL_IDD_NUM_BUTTONS(idd) ||
+		    HIL_IDD_NUM_AXES_PER_SET(*idd)) {
+			printk(KERN_INFO PREFIX
+				"combo devices are not supported.\n");
+			error = -EINVAL;
+			goto bail1;
+		}
+
+		dev->is_pointer = false;
+		hil_dev_keyboard_setup(dev);
+		break;
+
+	case HIL_IDD_DID_TYPE_REL:
+	case HIL_IDD_DID_TYPE_ABS:
+		dev->is_pointer = true;
+		hil_dev_pointer_setup(dev);
+		break;
+
+	default:
+		goto bail1;
+	}
+
+	input_dev->id.bustype	= BUS_HIL;
+	input_dev->id.vendor	= PCI_VENDOR_ID_HP;
+	input_dev->id.product	= 0x0001; /* TODO: get from kbd->rsc */
+	input_dev->id.version	= 0x0100; /* TODO: get from kbd->rsc */
+	input_dev->dev.parent	= &serio->dev;
+
+	if (!dev->is_pointer) {
+		serio_write(serio, 0);
+		serio_write(serio, 0);
+		serio_write(serio, HIL_PKT_CMD >> 8);
+		/* Enable Keyswitch Autorepeat 1 */
+		serio_write(serio, HIL_CMD_EK1);
+		/* No need to wait for completion */
+	}
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto bail1;
+
+	return 0;
+
+ bail1:
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+ bail0:
+	input_free_device(input_dev);
+	kfree(dev);
+	return error;
+}
+
+static const struct serio_device_id hil_dev_ids[] = {
+	{
+		.type = SERIO_HIL_MLC,
+		.proto = SERIO_HIL,
+		.id = SERIO_ANY,
+		.extra = SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, hil_dev_ids);
+
+static struct serio_driver hil_serio_drv = {
+	.driver		= {
+		.name	= "hil_dev",
+	},
+	.description	= "HP HIL keyboard/mouse/tablet driver",
+	.id_table	= hil_dev_ids,
+	.connect	= hil_dev_connect,
+	.disconnect	= hil_dev_disconnect,
+	.interrupt	= hil_dev_interrupt
+};
+
+module_serio_driver(hil_serio_drv);
diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
new file mode 100644
index 000000000..62ccfebf2
--- /dev/null
+++ b/drivers/input/keyboard/hilkbd.c
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/drivers/hil/hilkbd.c
+ *
+ *  Copyright (C) 1998 Philip Blundell <philb@gnu.org>
+ *  Copyright (C) 1999 Matthew Wilcox <willy@infradead.org>
+ *  Copyright (C) 1999-2007 Helge Deller <deller@gmx.de>
+ *
+ *  Very basic HP Human Interface Loop (HIL) driver.
+ *  This driver handles the keyboard on HP300 (m68k) and on some
+ *  HP700 (parisc) series machines.
+ */
+
+#include <linux/pci_ids.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hil.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#ifdef CONFIG_HP300
+#include <asm/hwtest.h>
+#endif
+
+
+MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller");
+MODULE_DESCRIPTION("HIL keyboard driver (basic functionality)");
+MODULE_LICENSE("GPL v2");
+
+
+#if defined(CONFIG_PARISC)
+
+ #include <asm/io.h>
+ #include <asm/hardware.h>
+ #include <asm/parisc-device.h>
+ static unsigned long hil_base;	/* HPA for the HIL device */
+ static unsigned int hil_irq;
+ #define HILBASE		hil_base /* HPPA (parisc) port address */
+ #define HIL_DATA		0x800
+ #define HIL_CMD		0x801
+ #define HIL_IRQ		hil_irq
+ #define hil_readb(p)		gsc_readb(p)
+ #define hil_writeb(v,p)	gsc_writeb((v),(p))
+
+#elif defined(CONFIG_HP300)
+
+ #define HILBASE		0xf0428000UL /* HP300 (m68k) port address */
+ #define HIL_DATA		0x1
+ #define HIL_CMD		0x3
+ #define HIL_IRQ		2
+ #define hil_readb(p)		readb((const volatile void __iomem *)(p))
+ #define hil_writeb(v, p)	writeb((v), (volatile void __iomem *)(p))
+
+#else
+#error "HIL is not supported on this platform"
+#endif
+
+
+
+/* HIL helper functions */
+
+#define hil_busy()              (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY)
+#define hil_data_available()    (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY)
+#define hil_status()            (hil_readb(HILBASE + HIL_CMD))
+#define hil_command(x)          do { hil_writeb((x), HILBASE + HIL_CMD); } while (0)
+#define hil_read_data()         (hil_readb(HILBASE + HIL_DATA))
+#define hil_write_data(x)       do { hil_writeb((x), HILBASE + HIL_DATA); } while (0)
+
+/* HIL constants */
+
+#define	HIL_BUSY		0x02
+#define	HIL_DATA_RDY		0x01
+
+#define	HIL_SETARD		0xA0		/* set auto-repeat delay */
+#define	HIL_SETARR		0xA2		/* set auto-repeat rate */
+#define	HIL_SETTONE		0xA3		/* set tone generator */
+#define	HIL_CNMT		0xB2		/* clear nmi */
+#define	HIL_INTON		0x5C		/* Turn on interrupts. */
+#define	HIL_INTOFF		0x5D		/* Turn off interrupts. */
+
+#define	HIL_READKBDSADR		0xF9
+#define	HIL_WRITEKBDSADR	0xE9
+
+static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly =
+	{ HIL_KEYCODES_SET1 };
+
+/* HIL structure */
+static struct {
+	struct input_dev *dev;
+
+	unsigned int curdev;
+
+	unsigned char s;
+	unsigned char c;
+	int valid;
+
+	unsigned char data[16];
+	unsigned int ptr;
+	spinlock_t lock;
+
+	void *dev_id;	/* native bus device */
+} hil_dev;
+
+
+static void poll_finished(void)
+{
+	int down;
+	int key;
+	unsigned char scode;
+
+	switch (hil_dev.data[0]) {
+	case 0x40:
+		down = (hil_dev.data[1] & 1) == 0;
+		scode = hil_dev.data[1] >> 1;
+		key = hphilkeyb_keycode[scode];
+		input_report_key(hil_dev.dev, key, down);
+		break;
+	}
+	hil_dev.curdev = 0;
+}
+
+
+static inline void handle_status(unsigned char s, unsigned char c)
+{
+	if (c & 0x8) {
+		/* End of block */
+		if (c & 0x10)
+			poll_finished();
+	} else {
+		if (c & 0x10) {
+			if (hil_dev.curdev)
+				poll_finished();  /* just in case */
+			hil_dev.curdev = c & 7;
+			hil_dev.ptr = 0;
+		}
+	}
+}
+
+
+static inline void handle_data(unsigned char s, unsigned char c)
+{
+	if (hil_dev.curdev) {
+		hil_dev.data[hil_dev.ptr++] = c;
+		hil_dev.ptr &= 15;
+	}
+}
+
+
+/* handle HIL interrupts */
+static irqreturn_t hil_interrupt(int irq, void *handle)
+{
+	unsigned char s, c;
+
+	s = hil_status();
+	c = hil_read_data();
+
+	switch (s >> 4) {
+	case 0x5:
+		handle_status(s, c);
+		break;
+	case 0x6:
+		handle_data(s, c);
+		break;
+	case 0x4:
+		hil_dev.s = s;
+		hil_dev.c = c;
+		mb();
+		hil_dev.valid = 1;
+		break;
+	}
+	return IRQ_HANDLED;
+}
+
+
+/* send a command to the HIL */
+static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hil_dev.lock, flags);
+	while (hil_busy())
+		/* wait */;
+	hil_command(cmd);
+	while (len--) {
+		while (hil_busy())
+			/* wait */;
+		hil_write_data(*(data++));
+	}
+	spin_unlock_irqrestore(&hil_dev.lock, flags);
+}
+
+
+/* initialize HIL */
+static int hil_keyb_init(void)
+{
+	unsigned char c;
+	unsigned int i, kbid;
+	wait_queue_head_t hil_wait;
+	int err;
+
+	if (hil_dev.dev)
+		return -ENODEV; /* already initialized */
+
+	init_waitqueue_head(&hil_wait);
+	spin_lock_init(&hil_dev.lock);
+
+	hil_dev.dev = input_allocate_device();
+	if (!hil_dev.dev)
+		return -ENOMEM;
+
+	err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id);
+	if (err) {
+		printk(KERN_ERR "HIL: Can't get IRQ\n");
+		goto err1;
+	}
+
+	/* Turn on interrupts */
+	hil_do(HIL_INTON, NULL, 0);
+
+	/* Look for keyboards */
+	hil_dev.valid = 0;	/* clear any pending data */
+	hil_do(HIL_READKBDSADR, NULL, 0);
+
+	wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ);
+	if (!hil_dev.valid)
+		printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");
+
+	c = hil_dev.c;
+	hil_dev.valid = 0;
+	if (c == 0) {
+		kbid = -1;
+		printk(KERN_WARNING "HIL: no keyboard present\n");
+	} else {
+		kbid = ffz(~c);
+		printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid);
+	}
+
+	/* set it to raw mode */
+	c = 0;
+	hil_do(HIL_WRITEKBDSADR, &c, 1);
+
+	for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
+		if (hphilkeyb_keycode[i] != KEY_RESERVED)
+			__set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
+
+	hil_dev.dev->evbit[0]	= BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	hil_dev.dev->ledbit[0]	= BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
+		BIT_MASK(LED_SCROLLL);
+	hil_dev.dev->keycodemax	= HIL_KEYCODES_SET1_TBLSIZE;
+	hil_dev.dev->keycodesize= sizeof(hphilkeyb_keycode[0]);
+	hil_dev.dev->keycode	= hphilkeyb_keycode;
+	hil_dev.dev->name	= "HIL keyboard";
+	hil_dev.dev->phys	= "hpkbd/input0";
+
+	hil_dev.dev->id.bustype	= BUS_HIL;
+	hil_dev.dev->id.vendor	= PCI_VENDOR_ID_HP;
+	hil_dev.dev->id.product	= 0x0001;
+	hil_dev.dev->id.version	= 0x0010;
+
+	err = input_register_device(hil_dev.dev);
+	if (err) {
+		printk(KERN_ERR "HIL: Can't register device\n");
+		goto err2;
+	}
+
+	printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
+	       hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
+
+	return 0;
+
+err2:
+	hil_do(HIL_INTOFF, NULL, 0);
+	free_irq(HIL_IRQ, hil_dev.dev_id);
+err1:
+	input_free_device(hil_dev.dev);
+	hil_dev.dev = NULL;
+	return err;
+}
+
+static void hil_keyb_exit(void)
+{
+	if (HIL_IRQ)
+		free_irq(HIL_IRQ, hil_dev.dev_id);
+
+	/* Turn off interrupts */
+	hil_do(HIL_INTOFF, NULL, 0);
+
+	input_unregister_device(hil_dev.dev);
+	hil_dev.dev = NULL;
+}
+
+#if defined(CONFIG_PARISC)
+static int __init hil_probe_chip(struct parisc_device *dev)
+{
+	/* Only allow one HIL keyboard */
+	if (hil_dev.dev)
+		return -ENODEV;
+
+	if (!dev->irq) {
+		printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n",
+			(void *)dev->hpa.start);
+		return -ENODEV;
+	}
+
+	hil_base = dev->hpa.start;
+	hil_irq  = dev->irq;
+	hil_dev.dev_id = dev;
+
+	printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq);
+
+	return hil_keyb_init();
+}
+
+static int __exit hil_remove_chip(struct parisc_device *dev)
+{
+	hil_keyb_exit();
+
+	return 0;
+}
+
+static const struct parisc_device_id hil_tbl[] __initconst = {
+	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 },
+	{ 0, }
+};
+
+#if 0
+/* Disabled to avoid conflicts with the HP SDC HIL drivers */
+MODULE_DEVICE_TABLE(parisc, hil_tbl);
+#endif
+
+static struct parisc_driver hil_driver __refdata = {
+	.name		= "hil",
+	.id_table	= hil_tbl,
+	.probe		= hil_probe_chip,
+	.remove		= __exit_p(hil_remove_chip),
+};
+
+static int __init hil_init(void)
+{
+	return register_parisc_driver(&hil_driver);
+}
+
+static void __exit hil_exit(void)
+{
+	unregister_parisc_driver(&hil_driver);
+}
+
+#else /* !CONFIG_PARISC */
+
+static int __init hil_init(void)
+{
+	int error;
+
+	/* Only allow one HIL keyboard */
+	if (hil_dev.dev)
+		return -EBUSY;
+
+	if (!MACH_IS_HP300)
+		return -ENODEV;
+
+	if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
+		printk(KERN_ERR "HIL: hardware register was not found\n");
+		return -ENODEV;
+	}
+
+	if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
+		printk(KERN_ERR "HIL: IOPORT region already used\n");
+		return -EIO;
+	}
+
+	error = hil_keyb_init();
+	if (error) {
+		release_region(HILBASE + HIL_DATA, 2);
+		return error;
+	}
+
+	return 0;
+}
+
+static void __exit hil_exit(void)
+{
+	hil_keyb_exit();
+	release_region(HILBASE + HIL_DATA, 2);
+}
+
+#endif /* CONFIG_PARISC */
+
+module_init(hil_init);
+module_exit(hil_exit);
diff --git a/drivers/input/keyboard/hpps2atkbd.h b/drivers/input/keyboard/hpps2atkbd.h
new file mode 100644
index 000000000..dc33f6945
--- /dev/null
+++ b/drivers/input/keyboard/hpps2atkbd.h
@@ -0,0 +1,110 @@
+/*
+ * drivers/input/keyboard/hpps2atkbd.h
+ *
+ * Copyright (c) 2004 Helge Deller <deller@gmx.de>
+ * Copyright (c) 2002 Laurent Canet <canetl@esiee.fr>
+ * Copyright (c) 2002 Thibaut Varene <varenet@parisc-linux.org>
+ * Copyright (c) 2000 Xavier Debacker <debackex@esiee.fr>
+ *
+ * HP PS/2 AT-compatible Keyboard, found in PA/RISC Workstations & Laptops
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+
+/* Is the keyboard an RDI PrecisionBook? */
+#ifndef CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES
+# define CONFLICT(x,y) x
+#else
+# define CONFLICT(x,y) y
+#endif
+
+/* sadly RDI (Tadpole) decided to ship a different keyboard layout
+   than HP for their PS/2 laptop keyboard which leads to conflicting
+   keycodes between a normal HP PS/2 keyboard and a RDI Precisionbook.
+                                HP:		RDI:            */
+#define C_07	CONFLICT(	KEY_F12,	KEY_F1		)
+#define C_11	CONFLICT(	KEY_LEFTALT,	KEY_LEFTCTRL	)
+#define C_14	CONFLICT(	KEY_LEFTCTRL,	KEY_CAPSLOCK	)
+#define C_58	CONFLICT(	KEY_CAPSLOCK,	KEY_RIGHTCTRL	)
+#define C_61	CONFLICT(	KEY_102ND,	KEY_LEFT	)
+
+/* Raw SET 2 scancode table */
+
+/* 00 */  KEY_RESERVED, KEY_F9,        KEY_RESERVED,  KEY_F5,        KEY_F3,        KEY_F1,       KEY_F2,        C_07,
+/* 08 */  KEY_ESC,      KEY_F10,       KEY_F8,        KEY_F6,        KEY_F4,        KEY_TAB,      KEY_GRAVE,     KEY_F2,
+/* 10 */  KEY_RESERVED, C_11,          KEY_LEFTSHIFT, KEY_RESERVED,  C_14,          KEY_Q,        KEY_1,         KEY_F3,
+/* 18 */  KEY_RESERVED, KEY_LEFTALT,   KEY_Z,         KEY_S,         KEY_A,         KEY_W,        KEY_2,         KEY_F4,
+/* 20 */  KEY_RESERVED, KEY_C,         KEY_X,         KEY_D,         KEY_E,         KEY_4,        KEY_3,         KEY_F5,
+/* 28 */  KEY_RESERVED, KEY_SPACE,     KEY_V,         KEY_F,         KEY_T,         KEY_R,        KEY_5,         KEY_F6,
+/* 30 */  KEY_RESERVED, KEY_N,         KEY_B,         KEY_H,         KEY_G,         KEY_Y,        KEY_6,         KEY_F7,
+/* 38 */  KEY_RESERVED, KEY_RIGHTALT,  KEY_M,         KEY_J,         KEY_U,         KEY_7,        KEY_8,         KEY_F8,
+/* 40 */  KEY_RESERVED, KEY_COMMA,     KEY_K,         KEY_I,         KEY_O,         KEY_0,        KEY_9,         KEY_F9,
+/* 48 */  KEY_RESERVED, KEY_DOT,       KEY_SLASH,     KEY_L,         KEY_SEMICOLON, KEY_P,        KEY_MINUS,     KEY_F10,
+/* 50 */  KEY_RESERVED, KEY_RESERVED,  KEY_APOSTROPHE,KEY_RESERVED,  KEY_LEFTBRACE, KEY_EQUAL,    KEY_F11,       KEY_SYSRQ,
+/* 58 */  C_58,         KEY_RIGHTSHIFT,KEY_ENTER,     KEY_RIGHTBRACE,KEY_BACKSLASH, KEY_BACKSLASH,KEY_F12,       KEY_SCROLLLOCK,
+/* 60 */  KEY_DOWN,     C_61,          KEY_PAUSE,     KEY_UP,        KEY_DELETE,    KEY_END,      KEY_BACKSPACE, KEY_INSERT,
+/* 68 */  KEY_RESERVED, KEY_KP1,       KEY_RIGHT,     KEY_KP4,       KEY_KP7,       KEY_PAGEDOWN, KEY_HOME,      KEY_PAGEUP,
+/* 70 */  KEY_KP0,      KEY_KPDOT,     KEY_KP2,       KEY_KP5,       KEY_KP6,       KEY_KP8,      KEY_ESC,       KEY_NUMLOCK,
+/* 78 */  KEY_F11,      KEY_KPPLUS,    KEY_KP3,       KEY_KPMINUS,   KEY_KPASTERISK,KEY_KP9,      KEY_SCROLLLOCK,KEY_102ND,
+/* 80 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 88 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 90 */  KEY_RESERVED, KEY_RIGHTALT,  255,           KEY_RESERVED,  KEY_RIGHTCTRL, KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 98 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_CAPSLOCK, KEY_RESERVED,  KEY_LEFTMETA,
+/* a0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RIGHTMETA,
+/* a8 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_COMPOSE,
+/* b0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* b8 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* c0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* c8 */  KEY_RESERVED, KEY_RESERVED,  KEY_KPSLASH,   KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* d0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* d8 */  KEY_RESERVED, KEY_RESERVED,  KEY_KPENTER,   KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* e0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* e8 */  KEY_RESERVED, KEY_END,       KEY_RESERVED,  KEY_LEFT,      KEY_HOME,      KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* f0 */  KEY_INSERT,   KEY_DELETE,    KEY_DOWN,      KEY_RESERVED,  KEY_RIGHT,     KEY_UP,       KEY_RESERVED,  KEY_PAUSE,
+/* f8 */  KEY_RESERVED, KEY_RESERVED,  KEY_PAGEDOWN,  KEY_RESERVED,  KEY_SYSRQ,     KEY_PAGEUP,   KEY_RESERVED,  KEY_RESERVED,
+
+/* These are offset for escaped keycodes: */
+
+/* 00 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_F7,        KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 08 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_LEFTMETA,  KEY_RIGHTMETA, KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 10 */  KEY_RESERVED, KEY_RIGHTALT,  KEY_RESERVED,  KEY_RESERVED,  KEY_RIGHTCTRL, KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 18 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 20 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 28 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 30 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 38 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 40 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 48 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 50 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 58 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 60 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 68 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 70 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 78 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 80 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 88 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 90 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* 98 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* a0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* a8 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* b0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* b8 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* c0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* c8 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* d0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* d8 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* e0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* e8 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* f0 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,
+/* f8 */  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED,  KEY_RESERVED, KEY_RESERVED,  KEY_RESERVED
+
+#undef CONFLICT
+#undef C_07
+#undef C_11
+#undef C_14
+#undef C_58
+#undef C_61
+
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
new file mode 100644
index 000000000..5a46d113e
--- /dev/null
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Driver for the IMX keypad port.
+// Copyright (C) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+
+/*
+ * Keypad Controller registers (halfword)
+ */
+#define KPCR		0x00 /* Keypad Control Register */
+
+#define KPSR		0x02 /* Keypad Status Register */
+#define KBD_STAT_KPKD	(0x1 << 0) /* Key Press Interrupt Status bit (w1c) */
+#define KBD_STAT_KPKR	(0x1 << 1) /* Key Release Interrupt Status bit (w1c) */
+#define KBD_STAT_KDSC	(0x1 << 2) /* Key Depress Synch Chain Status bit (w1c)*/
+#define KBD_STAT_KRSS	(0x1 << 3) /* Key Release Synch Status bit (w1c)*/
+#define KBD_STAT_KDIE	(0x1 << 8) /* Key Depress Interrupt Enable Status bit */
+#define KBD_STAT_KRIE	(0x1 << 9) /* Key Release Interrupt Enable */
+#define KBD_STAT_KPPEN	(0x1 << 10) /* Keypad Clock Enable */
+
+#define KDDR		0x04 /* Keypad Data Direction Register */
+#define KPDR		0x06 /* Keypad Data Register */
+
+#define MAX_MATRIX_KEY_ROWS	8
+#define MAX_MATRIX_KEY_COLS	8
+#define MATRIX_ROW_SHIFT	3
+
+#define MAX_MATRIX_KEY_NUM	(MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
+
+struct imx_keypad {
+
+	struct clk *clk;
+	struct input_dev *input_dev;
+	void __iomem *mmio_base;
+
+	int			irq;
+	struct timer_list	check_matrix_timer;
+
+	/*
+	 * The matrix is stable only if no changes are detected after
+	 * IMX_KEYPAD_SCANS_FOR_STABILITY scans
+	 */
+#define IMX_KEYPAD_SCANS_FOR_STABILITY 3
+	int			stable_count;
+
+	bool			enabled;
+
+	/* Masks for enabled rows/cols */
+	unsigned short		rows_en_mask;
+	unsigned short		cols_en_mask;
+
+	unsigned short		keycodes[MAX_MATRIX_KEY_NUM];
+
+	/*
+	 * Matrix states:
+	 * -stable: achieved after a complete debounce process.
+	 * -unstable: used in the debouncing process.
+	 */
+	unsigned short		matrix_stable_state[MAX_MATRIX_KEY_COLS];
+	unsigned short		matrix_unstable_state[MAX_MATRIX_KEY_COLS];
+};
+
+/* Scan the matrix and return the new state in *matrix_volatile_state. */
+static void imx_keypad_scan_matrix(struct imx_keypad *keypad,
+				  unsigned short *matrix_volatile_state)
+{
+	int col;
+	unsigned short reg_val;
+
+	for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+		if ((keypad->cols_en_mask & (1 << col)) == 0)
+			continue;
+		/*
+		 * Discharge keypad capacitance:
+		 * 2. write 1s on column data.
+		 * 3. configure columns as totem-pole to discharge capacitance.
+		 * 4. configure columns as open-drain.
+		 */
+		reg_val = readw(keypad->mmio_base + KPDR);
+		reg_val |= 0xff00;
+		writew(reg_val, keypad->mmio_base + KPDR);
+
+		reg_val = readw(keypad->mmio_base + KPCR);
+		reg_val &= ~((keypad->cols_en_mask & 0xff) << 8);
+		writew(reg_val, keypad->mmio_base + KPCR);
+
+		udelay(2);
+
+		reg_val = readw(keypad->mmio_base + KPCR);
+		reg_val |= (keypad->cols_en_mask & 0xff) << 8;
+		writew(reg_val, keypad->mmio_base + KPCR);
+
+		/*
+		 * 5. Write a single column to 0, others to 1.
+		 * 6. Sample row inputs and save data.
+		 * 7. Repeat steps 2 - 6 for remaining columns.
+		 */
+		reg_val = readw(keypad->mmio_base + KPDR);
+		reg_val &= ~(1 << (8 + col));
+		writew(reg_val, keypad->mmio_base + KPDR);
+
+		/*
+		 * Delay added to avoid propagating the 0 from column to row
+		 * when scanning.
+		 */
+		udelay(5);
+
+		/*
+		 * 1s in matrix_volatile_state[col] means key pressures
+		 * throw data from non enabled rows.
+		 */
+		reg_val = readw(keypad->mmio_base + KPDR);
+		matrix_volatile_state[col] = (~reg_val) & keypad->rows_en_mask;
+	}
+
+	/*
+	 * Return in standby mode:
+	 * 9. write 0s to columns
+	 */
+	reg_val = readw(keypad->mmio_base + KPDR);
+	reg_val &= 0x00ff;
+	writew(reg_val, keypad->mmio_base + KPDR);
+}
+
+/*
+ * Compare the new matrix state (volatile) with the stable one stored in
+ * keypad->matrix_stable_state and fire events if changes are detected.
+ */
+static void imx_keypad_fire_events(struct imx_keypad *keypad,
+				   unsigned short *matrix_volatile_state)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	int row, col;
+
+	for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+		unsigned short bits_changed;
+		int code;
+
+		if ((keypad->cols_en_mask & (1 << col)) == 0)
+			continue; /* Column is not enabled */
+
+		bits_changed = keypad->matrix_stable_state[col] ^
+						matrix_volatile_state[col];
+
+		if (bits_changed == 0)
+			continue; /* Column does not contain changes */
+
+		for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
+			if ((keypad->rows_en_mask & (1 << row)) == 0)
+				continue; /* Row is not enabled */
+			if ((bits_changed & (1 << row)) == 0)
+				continue; /* Row does not contain changes */
+
+			code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
+			input_event(input_dev, EV_MSC, MSC_SCAN, code);
+			input_report_key(input_dev, keypad->keycodes[code],
+				matrix_volatile_state[col] & (1 << row));
+			dev_dbg(&input_dev->dev, "Event code: %d, val: %d",
+				keypad->keycodes[code],
+				matrix_volatile_state[col] & (1 << row));
+		}
+	}
+	input_sync(input_dev);
+}
+
+/*
+ * imx_keypad_check_for_events is the timer handler.
+ */
+static void imx_keypad_check_for_events(struct timer_list *t)
+{
+	struct imx_keypad *keypad = from_timer(keypad, t, check_matrix_timer);
+	unsigned short matrix_volatile_state[MAX_MATRIX_KEY_COLS];
+	unsigned short reg_val;
+	bool state_changed, is_zero_matrix;
+	int i;
+
+	memset(matrix_volatile_state, 0, sizeof(matrix_volatile_state));
+
+	imx_keypad_scan_matrix(keypad, matrix_volatile_state);
+
+	state_changed = false;
+	for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
+		if ((keypad->cols_en_mask & (1 << i)) == 0)
+			continue;
+
+		if (keypad->matrix_unstable_state[i] ^ matrix_volatile_state[i]) {
+			state_changed = true;
+			break;
+		}
+	}
+
+	/*
+	 * If the matrix state is changed from the previous scan
+	 *   (Re)Begin the debouncing process, saving the new state in
+	 *    keypad->matrix_unstable_state.
+	 * else
+	 *   Increase the count of number of scans with a stable state.
+	 */
+	if (state_changed) {
+		memcpy(keypad->matrix_unstable_state, matrix_volatile_state,
+			sizeof(matrix_volatile_state));
+		keypad->stable_count = 0;
+	} else
+		keypad->stable_count++;
+
+	/*
+	 * If the matrix is not as stable as we want reschedule scan
+	 * in the near future.
+	 */
+	if (keypad->stable_count < IMX_KEYPAD_SCANS_FOR_STABILITY) {
+		mod_timer(&keypad->check_matrix_timer,
+			  jiffies + msecs_to_jiffies(10));
+		return;
+	}
+
+	/*
+	 * If the matrix state is stable, fire the events and save the new
+	 * stable state. Note, if the matrix is kept stable for longer
+	 * (keypad->stable_count > IMX_KEYPAD_SCANS_FOR_STABILITY) all
+	 * events have already been generated.
+	 */
+	if (keypad->stable_count == IMX_KEYPAD_SCANS_FOR_STABILITY) {
+		imx_keypad_fire_events(keypad, matrix_volatile_state);
+
+		memcpy(keypad->matrix_stable_state, matrix_volatile_state,
+			sizeof(matrix_volatile_state));
+	}
+
+	is_zero_matrix = true;
+	for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
+		if (matrix_volatile_state[i] != 0) {
+			is_zero_matrix = false;
+			break;
+		}
+	}
+
+
+	if (is_zero_matrix) {
+		/*
+		 * All keys have been released. Enable only the KDI
+		 * interrupt for future key presses (clear the KDI
+		 * status bit and its sync chain before that).
+		 */
+		reg_val = readw(keypad->mmio_base + KPSR);
+		reg_val |= KBD_STAT_KPKD | KBD_STAT_KDSC;
+		writew(reg_val, keypad->mmio_base + KPSR);
+
+		reg_val = readw(keypad->mmio_base + KPSR);
+		reg_val |= KBD_STAT_KDIE;
+		reg_val &= ~KBD_STAT_KRIE;
+		writew(reg_val, keypad->mmio_base + KPSR);
+	} else {
+		/*
+		 * Some keys are still pressed. Schedule a rescan in
+		 * attempt to detect multiple key presses and enable
+		 * the KRI interrupt to react quickly to key release
+		 * event.
+		 */
+		mod_timer(&keypad->check_matrix_timer,
+			  jiffies + msecs_to_jiffies(60));
+
+		reg_val = readw(keypad->mmio_base + KPSR);
+		reg_val |= KBD_STAT_KPKR | KBD_STAT_KRSS;
+		writew(reg_val, keypad->mmio_base + KPSR);
+
+		reg_val = readw(keypad->mmio_base + KPSR);
+		reg_val |= KBD_STAT_KRIE;
+		reg_val &= ~KBD_STAT_KDIE;
+		writew(reg_val, keypad->mmio_base + KPSR);
+	}
+}
+
+static irqreturn_t imx_keypad_irq_handler(int irq, void *dev_id)
+{
+	struct imx_keypad *keypad = dev_id;
+	unsigned short reg_val;
+
+	reg_val = readw(keypad->mmio_base + KPSR);
+
+	/* Disable both interrupt types */
+	reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
+	/* Clear interrupts status bits */
+	reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
+	writew(reg_val, keypad->mmio_base + KPSR);
+
+	if (keypad->enabled) {
+		/* The matrix is supposed to be changed */
+		keypad->stable_count = 0;
+
+		/* Schedule the scanning procedure near in the future */
+		mod_timer(&keypad->check_matrix_timer,
+			  jiffies + msecs_to_jiffies(2));
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void imx_keypad_config(struct imx_keypad *keypad)
+{
+	unsigned short reg_val;
+
+	/*
+	 * Include enabled rows in interrupt generation (KPCR[7:0])
+	 * Configure keypad columns as open-drain (KPCR[15:8])
+	 */
+	reg_val = readw(keypad->mmio_base + KPCR);
+	reg_val |= keypad->rows_en_mask & 0xff;		/* rows */
+	reg_val |= (keypad->cols_en_mask & 0xff) << 8;	/* cols */
+	writew(reg_val, keypad->mmio_base + KPCR);
+
+	/* Write 0's to KPDR[15:8] (Colums) */
+	reg_val = readw(keypad->mmio_base + KPDR);
+	reg_val &= 0x00ff;
+	writew(reg_val, keypad->mmio_base + KPDR);
+
+	/* Configure columns as output, rows as input (KDDR[15:0]) */
+	writew(0xff00, keypad->mmio_base + KDDR);
+
+	/*
+	 * Clear Key Depress and Key Release status bit.
+	 * Clear both synchronizer chain.
+	 */
+	reg_val = readw(keypad->mmio_base + KPSR);
+	reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD |
+		   KBD_STAT_KDSC | KBD_STAT_KRSS;
+	writew(reg_val, keypad->mmio_base + KPSR);
+
+	/* Enable KDI and disable KRI (avoid false release events). */
+	reg_val |= KBD_STAT_KDIE;
+	reg_val &= ~KBD_STAT_KRIE;
+	writew(reg_val, keypad->mmio_base + KPSR);
+}
+
+static void imx_keypad_inhibit(struct imx_keypad *keypad)
+{
+	unsigned short reg_val;
+
+	/* Inhibit KDI and KRI interrupts. */
+	reg_val = readw(keypad->mmio_base + KPSR);
+	reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
+	reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
+	writew(reg_val, keypad->mmio_base + KPSR);
+
+	/* Colums as open drain and disable all rows */
+	reg_val = (keypad->cols_en_mask & 0xff) << 8;
+	writew(reg_val, keypad->mmio_base + KPCR);
+}
+
+static void imx_keypad_close(struct input_dev *dev)
+{
+	struct imx_keypad *keypad = input_get_drvdata(dev);
+
+	dev_dbg(&dev->dev, ">%s\n", __func__);
+
+	/* Mark keypad as being inactive */
+	keypad->enabled = false;
+	synchronize_irq(keypad->irq);
+	del_timer_sync(&keypad->check_matrix_timer);
+
+	imx_keypad_inhibit(keypad);
+
+	/* Disable clock unit */
+	clk_disable_unprepare(keypad->clk);
+}
+
+static int imx_keypad_open(struct input_dev *dev)
+{
+	struct imx_keypad *keypad = input_get_drvdata(dev);
+	int error;
+
+	dev_dbg(&dev->dev, ">%s\n", __func__);
+
+	/* Enable the kpp clock */
+	error = clk_prepare_enable(keypad->clk);
+	if (error)
+		return error;
+
+	/* We became active from now */
+	keypad->enabled = true;
+
+	imx_keypad_config(keypad);
+
+	/* Sanity control, not all the rows must be actived now. */
+	if ((readw(keypad->mmio_base + KPDR) & keypad->rows_en_mask) == 0) {
+		dev_err(&dev->dev,
+			"too many keys pressed, control pins initialisation\n");
+		goto open_err;
+	}
+
+	return 0;
+
+open_err:
+	imx_keypad_close(dev);
+	return -EIO;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id imx_keypad_of_match[] = {
+	{ .compatible = "fsl,imx21-kpp", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_keypad_of_match);
+#endif
+
+static int imx_keypad_probe(struct platform_device *pdev)
+{
+	const struct matrix_keymap_data *keymap_data =
+			dev_get_platdata(&pdev->dev);
+	struct imx_keypad *keypad;
+	struct input_dev *input_dev;
+	int irq, error, i, row, col;
+
+	if (!keymap_data && !pdev->dev.of_node) {
+		dev_err(&pdev->dev, "no keymap defined\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
+	if (!keypad) {
+		dev_err(&pdev->dev, "not enough memory for driver data\n");
+		return -ENOMEM;
+	}
+
+	keypad->input_dev = input_dev;
+	keypad->irq = irq;
+	keypad->stable_count = 0;
+
+	timer_setup(&keypad->check_matrix_timer,
+		    imx_keypad_check_for_events, 0);
+
+	keypad->mmio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(keypad->mmio_base))
+		return PTR_ERR(keypad->mmio_base);
+
+	keypad->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get keypad clock\n");
+		return PTR_ERR(keypad->clk);
+	}
+
+	/* Init the Input device */
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = imx_keypad_open;
+	input_dev->close = imx_keypad_close;
+
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   MAX_MATRIX_KEY_ROWS,
+					   MAX_MATRIX_KEY_COLS,
+					   keypad->keycodes, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		return error;
+	}
+
+	/* Search for rows and cols enabled */
+	for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
+		for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+			i = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
+			if (keypad->keycodes[i] != KEY_RESERVED) {
+				keypad->rows_en_mask |= 1 << row;
+				keypad->cols_en_mask |= 1 << col;
+			}
+		}
+	}
+	dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask);
+	dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask);
+
+	__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, keypad);
+
+	/* Ensure that the keypad will stay dormant until opened */
+	error = clk_prepare_enable(keypad->clk);
+	if (error)
+		return error;
+	imx_keypad_inhibit(keypad);
+	clk_disable_unprepare(keypad->clk);
+
+	error = devm_request_irq(&pdev->dev, irq, imx_keypad_irq_handler, 0,
+			    pdev->name, keypad);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		return error;
+	}
+
+	/* Register the input device */
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, keypad);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int __maybe_unused imx_kbd_noirq_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct imx_keypad *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input_dev;
+	unsigned short reg_val = readw(kbd->mmio_base + KPSR);
+
+	/* imx kbd can wake up system even clock is disabled */
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		clk_disable_unprepare(kbd->clk);
+
+	mutex_unlock(&input_dev->mutex);
+
+	if (device_may_wakeup(&pdev->dev)) {
+		if (reg_val & KBD_STAT_KPKD)
+			reg_val |= KBD_STAT_KRIE;
+		if (reg_val & KBD_STAT_KPKR)
+			reg_val |= KBD_STAT_KDIE;
+		writew(reg_val, kbd->mmio_base + KPSR);
+
+		enable_irq_wake(kbd->irq);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused imx_kbd_noirq_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct imx_keypad *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input_dev;
+	int ret = 0;
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(kbd->irq);
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users) {
+		ret = clk_prepare_enable(kbd->clk);
+		if (ret)
+			goto err_clk;
+	}
+
+err_clk:
+	mutex_unlock(&input_dev->mutex);
+
+	return ret;
+}
+
+static const struct dev_pm_ops imx_kbd_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx_kbd_noirq_suspend, imx_kbd_noirq_resume)
+};
+
+static struct platform_driver imx_keypad_driver = {
+	.driver		= {
+		.name	= "imx-keypad",
+		.pm	= &imx_kbd_pm_ops,
+		.of_match_table = of_match_ptr(imx_keypad_of_match),
+	},
+	.probe		= imx_keypad_probe,
+};
+module_platform_driver(imx_keypad_driver);
+
+MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>");
+MODULE_DESCRIPTION("IMX Keypad Port Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx-keypad");
diff --git a/drivers/input/keyboard/imx_sc_key.c b/drivers/input/keyboard/imx_sc_key.c
new file mode 100644
index 000000000..d18839f1f
--- /dev/null
+++ b/drivers/input/keyboard/imx_sc_key.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#define DEBOUNCE_TIME				30
+#define REPEAT_INTERVAL				60
+
+#define SC_IRQ_BUTTON				1
+#define SC_IRQ_GROUP_WAKE			3
+
+#define IMX_SC_MISC_FUNC_GET_BUTTON_STATUS	18
+
+struct imx_key_drv_data {
+	u32 keycode;
+	bool keystate;  /* true: pressed, false: released */
+	struct delayed_work check_work;
+	struct input_dev *input;
+	struct imx_sc_ipc *key_ipc_handle;
+	struct notifier_block key_notifier;
+};
+
+struct imx_sc_msg_key {
+	struct imx_sc_rpc_msg hdr;
+	u32 state;
+};
+
+static int imx_sc_key_notify(struct notifier_block *nb,
+			     unsigned long event, void *group)
+{
+	struct imx_key_drv_data *priv =
+				 container_of(nb,
+					      struct imx_key_drv_data,
+					      key_notifier);
+
+	if ((event & SC_IRQ_BUTTON) && (*(u8 *)group == SC_IRQ_GROUP_WAKE)) {
+		schedule_delayed_work(&priv->check_work,
+				      msecs_to_jiffies(DEBOUNCE_TIME));
+		pm_wakeup_event(priv->input->dev.parent, 0);
+	}
+
+	return 0;
+}
+
+static void imx_sc_check_for_events(struct work_struct *work)
+{
+	struct imx_key_drv_data *priv =
+				 container_of(work,
+					      struct imx_key_drv_data,
+					      check_work.work);
+	struct input_dev *input = priv->input;
+	struct imx_sc_msg_key msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	bool state;
+	int error;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_MISC;
+	hdr->func = IMX_SC_MISC_FUNC_GET_BUTTON_STATUS;
+	hdr->size = 1;
+
+	error = imx_scu_call_rpc(priv->key_ipc_handle, &msg, true);
+	if (error) {
+		dev_err(&input->dev, "read imx sc key failed, error %d\n", error);
+		return;
+	}
+
+	/*
+	 * The response data from SCU firmware is 4 bytes,
+	 * but ONLY the first byte is the key state, other
+	 * 3 bytes could be some dirty data, so we should
+	 * ONLY take the first byte as key state.
+	 */
+	state = (bool)(msg.state & 0xff);
+
+	if (state ^ priv->keystate) {
+		priv->keystate = state;
+		input_event(input, EV_KEY, priv->keycode, state);
+		input_sync(input);
+		if (!priv->keystate)
+			pm_relax(priv->input->dev.parent);
+	}
+
+	if (state)
+		schedule_delayed_work(&priv->check_work,
+				      msecs_to_jiffies(REPEAT_INTERVAL));
+}
+
+static void imx_sc_key_action(void *data)
+{
+	struct imx_key_drv_data *priv = data;
+
+	imx_scu_irq_group_enable(SC_IRQ_GROUP_WAKE, SC_IRQ_BUTTON, false);
+	imx_scu_irq_unregister_notifier(&priv->key_notifier);
+	cancel_delayed_work_sync(&priv->check_work);
+}
+
+static int imx_sc_key_probe(struct platform_device *pdev)
+{
+	struct imx_key_drv_data *priv;
+	struct input_dev *input;
+	int error;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	error = imx_scu_get_handle(&priv->key_ipc_handle);
+	if (error)
+		return error;
+
+	if (device_property_read_u32(&pdev->dev, "linux,keycodes",
+				     &priv->keycode)) {
+		dev_err(&pdev->dev, "missing linux,keycodes property\n");
+		return -EINVAL;
+	}
+
+	INIT_DELAYED_WORK(&priv->check_work, imx_sc_check_for_events);
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	input->name = pdev->name;
+	input->phys = "imx-sc-key/input0";
+	input->id.bustype = BUS_HOST;
+
+	input_set_capability(input, EV_KEY, priv->keycode);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	priv->input = input;
+	platform_set_drvdata(pdev, priv);
+
+	error = imx_scu_irq_group_enable(SC_IRQ_GROUP_WAKE, SC_IRQ_BUTTON,
+					 true);
+	if (error) {
+		dev_err(&pdev->dev, "failed to enable scu group irq\n");
+		return error;
+	}
+
+	error = devm_add_action_or_reset(&pdev->dev, imx_sc_key_action, &priv);
+	if (error)
+		return error;
+
+	priv->key_notifier.notifier_call = imx_sc_key_notify;
+	error = imx_scu_irq_register_notifier(&priv->key_notifier);
+	if (error)
+		dev_err(&pdev->dev, "failed to register scu notifier\n");
+
+	return error;
+}
+
+static const struct of_device_id imx_sc_key_ids[] = {
+	{ .compatible = "fsl,imx-sc-key" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_sc_key_ids);
+
+static struct platform_driver imx_sc_key_driver = {
+	.driver = {
+		.name = "imx-sc-key",
+		.of_match_table = imx_sc_key_ids,
+	},
+	.probe = imx_sc_key_probe,
+};
+module_platform_driver(imx_sc_key_driver);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("i.MX System Controller Key Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/ipaq-micro-keys.c b/drivers/input/keyboard/ipaq-micro-keys.c
new file mode 100644
index 000000000..fe5a9c54a
--- /dev/null
+++ b/drivers/input/keyboard/ipaq-micro-keys.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * h3600 atmel micro companion support, key subdevice
+ * based on previous kernel 2.4 version
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/sysctl.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+
+struct ipaq_micro_keys {
+	struct ipaq_micro *micro;
+	struct input_dev *input;
+	u16 *codes;
+};
+
+static const u16 micro_keycodes[] = {
+	KEY_RECORD,		/* 1:  Record button			*/
+	KEY_CALENDAR,		/* 2:  Calendar				*/
+	KEY_ADDRESSBOOK,	/* 3:  Contacts (looks like Outlook)	*/
+	KEY_MAIL,		/* 4:  Envelope (Q on older iPAQs)	*/
+	KEY_HOMEPAGE,		/* 5:  Start (looks like swoopy arrow)	*/
+	KEY_UP,			/* 6:  Up				*/
+	KEY_RIGHT,		/* 7:  Right				*/
+	KEY_LEFT,		/* 8:  Left				*/
+	KEY_DOWN,		/* 9:  Down				*/
+};
+
+static void micro_key_receive(void *data, int len, unsigned char *msg)
+{
+	struct ipaq_micro_keys *keys = data;
+	int key, down;
+
+	down = 0x80 & msg[0];
+	key  = 0x7f & msg[0];
+
+	if (key < ARRAY_SIZE(micro_keycodes)) {
+		input_report_key(keys->input, keys->codes[key], down);
+		input_sync(keys->input);
+	}
+}
+
+static void micro_key_start(struct ipaq_micro_keys *keys)
+{
+	spin_lock(&keys->micro->lock);
+	keys->micro->key = micro_key_receive;
+	keys->micro->key_data = keys;
+	spin_unlock(&keys->micro->lock);
+}
+
+static void micro_key_stop(struct ipaq_micro_keys *keys)
+{
+	spin_lock(&keys->micro->lock);
+	keys->micro->key = NULL;
+	keys->micro->key_data = NULL;
+	spin_unlock(&keys->micro->lock);
+}
+
+static int micro_key_open(struct input_dev *input)
+{
+	struct ipaq_micro_keys *keys = input_get_drvdata(input);
+
+	micro_key_start(keys);
+
+	return 0;
+}
+
+static void micro_key_close(struct input_dev *input)
+{
+	struct ipaq_micro_keys *keys = input_get_drvdata(input);
+
+	micro_key_stop(keys);
+}
+
+static int micro_key_probe(struct platform_device *pdev)
+{
+	struct ipaq_micro_keys *keys;
+	int error;
+	int i;
+
+	keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+	if (!keys)
+		return -ENOMEM;
+
+	keys->micro = dev_get_drvdata(pdev->dev.parent);
+
+	keys->input = devm_input_allocate_device(&pdev->dev);
+	if (!keys->input)
+		return -ENOMEM;
+
+	keys->input->keycodesize = sizeof(micro_keycodes[0]);
+	keys->input->keycodemax = ARRAY_SIZE(micro_keycodes);
+	keys->codes = devm_kmemdup(&pdev->dev, micro_keycodes,
+			   keys->input->keycodesize * keys->input->keycodemax,
+			   GFP_KERNEL);
+	if (!keys->codes)
+		return -ENOMEM;
+
+	keys->input->keycode = keys->codes;
+
+	__set_bit(EV_KEY, keys->input->evbit);
+	for (i = 0; i < ARRAY_SIZE(micro_keycodes); i++)
+		__set_bit(micro_keycodes[i], keys->input->keybit);
+
+	keys->input->name = "h3600 micro keys";
+	keys->input->open = micro_key_open;
+	keys->input->close = micro_key_close;
+	input_set_drvdata(keys->input, keys);
+
+	error = input_register_device(keys->input);
+	if (error)
+		return error;
+
+	platform_set_drvdata(pdev, keys);
+	return 0;
+}
+
+static int __maybe_unused micro_key_suspend(struct device *dev)
+{
+	struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
+
+	micro_key_stop(keys);
+
+	return 0;
+}
+
+static int __maybe_unused micro_key_resume(struct device *dev)
+{
+	struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
+	struct input_dev *input = keys->input;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users)
+		micro_key_start(keys);
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(micro_key_dev_pm_ops,
+			 micro_key_suspend, micro_key_resume);
+
+static struct platform_driver micro_key_device_driver = {
+	.driver = {
+		.name    = "ipaq-micro-keys",
+		.pm	= &micro_key_dev_pm_ops,
+	},
+	.probe   = micro_key_probe,
+};
+module_platform_driver(micro_key_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro keys");
+MODULE_ALIAS("platform:ipaq-micro-keys");
diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c
new file mode 100644
index 000000000..93446b21f
--- /dev/null
+++ b/drivers/input/keyboard/iqs62x-keys.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A/621/622/624/625 Keys and Switches
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+enum {
+	IQS62X_SW_HALL_N,
+	IQS62X_SW_HALL_S,
+};
+
+static const char * const iqs62x_switch_names[] = {
+	[IQS62X_SW_HALL_N] = "hall-switch-north",
+	[IQS62X_SW_HALL_S] = "hall-switch-south",
+};
+
+struct iqs62x_switch_desc {
+	enum iqs62x_event_flag flag;
+	unsigned int code;
+	bool enabled;
+};
+
+struct iqs62x_keys_private {
+	struct iqs62x_core *iqs62x;
+	struct input_dev *input;
+	struct notifier_block notifier;
+	struct iqs62x_switch_desc switches[ARRAY_SIZE(iqs62x_switch_names)];
+	unsigned int keycode[IQS62X_NUM_KEYS];
+	unsigned int keycodemax;
+	u8 interval;
+};
+
+static int iqs62x_keys_parse_prop(struct platform_device *pdev,
+				  struct iqs62x_keys_private *iqs62x_keys)
+{
+	struct fwnode_handle *child;
+	unsigned int val;
+	int ret, i;
+
+	ret = device_property_count_u32(&pdev->dev, "linux,keycodes");
+	if (ret > IQS62X_NUM_KEYS) {
+		dev_err(&pdev->dev, "Too many keycodes present\n");
+		return -EINVAL;
+	} else if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to count keycodes: %d\n", ret);
+		return ret;
+	}
+	iqs62x_keys->keycodemax = ret;
+
+	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
+					     iqs62x_keys->keycode,
+					     iqs62x_keys->keycodemax);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
+		child = device_get_named_child_node(&pdev->dev,
+						    iqs62x_switch_names[i]);
+		if (!child)
+			continue;
+
+		ret = fwnode_property_read_u32(child, "linux,code", &val);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to read switch code: %d\n",
+				ret);
+			return ret;
+		}
+		iqs62x_keys->switches[i].code = val;
+		iqs62x_keys->switches[i].enabled = true;
+
+		if (fwnode_property_present(child, "azoteq,use-prox"))
+			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
+							 IQS62X_EVENT_HALL_N_P :
+							 IQS62X_EVENT_HALL_S_P);
+		else
+			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
+							 IQS62X_EVENT_HALL_N_T :
+							 IQS62X_EVENT_HALL_S_T);
+	}
+
+	return 0;
+}
+
+static int iqs62x_keys_init(struct iqs62x_keys_private *iqs62x_keys)
+{
+	struct iqs62x_core *iqs62x = iqs62x_keys->iqs62x;
+	enum iqs62x_event_flag flag;
+	unsigned int event_reg, val;
+	unsigned int event_mask = 0;
+	int ret, i;
+
+	switch (iqs62x->dev_desc->prod_num) {
+	case IQS620_PROD_NUM:
+	case IQS621_PROD_NUM:
+	case IQS622_PROD_NUM:
+		event_reg = IQS620_GLBL_EVENT_MASK;
+
+		/*
+		 * Discreet button, hysteresis and SAR UI flags represent keys
+		 * and are unmasked if mapped to a valid keycode.
+		 */
+		for (i = 0; i < iqs62x_keys->keycodemax; i++) {
+			if (iqs62x_keys->keycode[i] == KEY_RESERVED)
+				continue;
+
+			if (iqs62x_events[i].reg == IQS62X_EVENT_PROX)
+				event_mask |= iqs62x->dev_desc->prox_mask;
+			else if (iqs62x_events[i].reg == IQS62X_EVENT_HYST)
+				event_mask |= (iqs62x->dev_desc->hyst_mask |
+					       iqs62x->dev_desc->sar_mask);
+		}
+
+		ret = regmap_read(iqs62x->regmap, iqs62x->dev_desc->hall_flags,
+				  &val);
+		if (ret)
+			return ret;
+
+		/*
+		 * Hall UI flags represent switches and are unmasked if their
+		 * corresponding child nodes are present.
+		 */
+		for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
+			if (!(iqs62x_keys->switches[i].enabled))
+				continue;
+
+			flag = iqs62x_keys->switches[i].flag;
+
+			if (iqs62x_events[flag].reg != IQS62X_EVENT_HALL)
+				continue;
+
+			event_mask |= iqs62x->dev_desc->hall_mask;
+
+			input_report_switch(iqs62x_keys->input,
+					    iqs62x_keys->switches[i].code,
+					    (val & iqs62x_events[flag].mask) ==
+					    iqs62x_events[flag].val);
+		}
+
+		input_sync(iqs62x_keys->input);
+		break;
+
+	case IQS624_PROD_NUM:
+		event_reg = IQS624_HALL_UI;
+
+		/*
+		 * Interval change events represent keys and are unmasked if
+		 * either wheel movement flag is mapped to a valid keycode.
+		 */
+		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP] != KEY_RESERVED)
+			event_mask |= IQS624_HALL_UI_INT_EVENT;
+
+		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN] != KEY_RESERVED)
+			event_mask |= IQS624_HALL_UI_INT_EVENT;
+
+		ret = regmap_read(iqs62x->regmap, iqs62x->dev_desc->interval,
+				  &val);
+		if (ret)
+			return ret;
+
+		iqs62x_keys->interval = val;
+		break;
+
+	default:
+		return 0;
+	}
+
+	return regmap_update_bits(iqs62x->regmap, event_reg, event_mask, 0);
+}
+
+static int iqs62x_keys_notifier(struct notifier_block *notifier,
+				unsigned long event_flags, void *context)
+{
+	struct iqs62x_event_data *event_data = context;
+	struct iqs62x_keys_private *iqs62x_keys;
+	int ret, i;
+
+	iqs62x_keys = container_of(notifier, struct iqs62x_keys_private,
+				   notifier);
+
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		ret = iqs62x_keys_init(iqs62x_keys);
+		if (ret) {
+			dev_err(iqs62x_keys->input->dev.parent,
+				"Failed to re-initialize device: %d\n", ret);
+			return NOTIFY_BAD;
+		}
+
+		return NOTIFY_OK;
+	}
+
+	for (i = 0; i < iqs62x_keys->keycodemax; i++) {
+		if (iqs62x_events[i].reg == IQS62X_EVENT_WHEEL &&
+		    event_data->interval == iqs62x_keys->interval)
+			continue;
+
+		input_report_key(iqs62x_keys->input, iqs62x_keys->keycode[i],
+				 event_flags & BIT(i));
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
+		if (iqs62x_keys->switches[i].enabled)
+			input_report_switch(iqs62x_keys->input,
+					    iqs62x_keys->switches[i].code,
+					    event_flags &
+					    BIT(iqs62x_keys->switches[i].flag));
+
+	input_sync(iqs62x_keys->input);
+
+	if (event_data->interval == iqs62x_keys->interval)
+		return NOTIFY_OK;
+
+	/*
+	 * Each frame contains at most one wheel event (up or down), in which
+	 * case a complementary release cycle is emulated.
+	 */
+	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
+		input_report_key(iqs62x_keys->input,
+				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
+				 0);
+		input_sync(iqs62x_keys->input);
+	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
+		input_report_key(iqs62x_keys->input,
+				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
+				 0);
+		input_sync(iqs62x_keys->input);
+	}
+
+	iqs62x_keys->interval = event_data->interval;
+
+	return NOTIFY_OK;
+}
+
+static int iqs62x_keys_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs62x_keys_private *iqs62x_keys;
+	struct input_dev *input;
+	int ret, i;
+
+	iqs62x_keys = devm_kzalloc(&pdev->dev, sizeof(*iqs62x_keys),
+				   GFP_KERNEL);
+	if (!iqs62x_keys)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, iqs62x_keys);
+
+	ret = iqs62x_keys_parse_prop(pdev, iqs62x_keys);
+	if (ret)
+		return ret;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->keycodemax = iqs62x_keys->keycodemax;
+	input->keycode = iqs62x_keys->keycode;
+	input->keycodesize = sizeof(*iqs62x_keys->keycode);
+
+	input->name = iqs62x->dev_desc->dev_name;
+	input->id.bustype = BUS_I2C;
+
+	for (i = 0; i < iqs62x_keys->keycodemax; i++)
+		if (iqs62x_keys->keycode[i] != KEY_RESERVED)
+			input_set_capability(input, EV_KEY,
+					     iqs62x_keys->keycode[i]);
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
+		if (iqs62x_keys->switches[i].enabled)
+			input_set_capability(input, EV_SW,
+					     iqs62x_keys->switches[i].code);
+
+	iqs62x_keys->iqs62x = iqs62x;
+	iqs62x_keys->input = input;
+
+	ret = iqs62x_keys_init(iqs62x_keys);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize device: %d\n", ret);
+		return ret;
+	}
+
+	ret = input_register_device(iqs62x_keys->input);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register device: %d\n", ret);
+		return ret;
+	}
+
+	iqs62x_keys->notifier.notifier_call = iqs62x_keys_notifier;
+	ret = blocking_notifier_chain_register(&iqs62x_keys->iqs62x->nh,
+					       &iqs62x_keys->notifier);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+
+	return ret;
+}
+
+static int iqs62x_keys_remove(struct platform_device *pdev)
+{
+	struct iqs62x_keys_private *iqs62x_keys = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs62x_keys->iqs62x->nh,
+						 &iqs62x_keys->notifier);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to unregister notifier: %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver iqs62x_keys_platform_driver = {
+	.driver = {
+		.name = "iqs62x-keys",
+	},
+	.probe = iqs62x_keys_probe,
+	.remove = iqs62x_keys_remove,
+};
+module_platform_driver(iqs62x_keys_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Keys and Switches");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:iqs62x-keys");
diff --git a/drivers/input/keyboard/jornada680_kbd.c b/drivers/input/keyboard/jornada680_kbd.c
new file mode 100644
index 000000000..7e3508139
--- /dev/null
+++ b/drivers/input/keyboard/jornada680_kbd.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/input/keyboard/jornada680_kbd.c
+ *
+ * HP Jornada 620/660/680/690 scan keyboard platform driver
+ *  Copyright (C) 2007  Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *
+ * Based on hp680_keyb.c
+ *  Copyright (C) 2006 Paul Mundt
+ *  Copyright (C) 2005 Andriy Skulysh
+ * Split from drivers/input/keyboard/hp600_keyb.c
+ *  Copyright (C) 2000 Yaegashi Takeshi (hp6xx kbd scan routine and translation table)
+ *  Copyright (C) 2000 Niibe Yutaka (HP620 Keyb translation table)
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+
+#define PCCR 0xa4000104
+#define PDCR 0xa4000106
+#define PECR 0xa4000108
+#define PFCR 0xa400010a
+#define PCDR 0xa4000124
+#define PDDR 0xa4000126
+#define PEDR 0xa4000128
+#define PFDR 0xa400012a
+#define PGDR 0xa400012c
+#define PHDR 0xa400012e
+#define PJDR 0xa4000130
+#define PKDR 0xa4000132
+#define PLDR 0xa4000134
+
+static const unsigned short jornada_scancodes[] = {
+/* PTD1 */	KEY_CAPSLOCK, KEY_MACRO, KEY_LEFTCTRL, 0, KEY_ESC, KEY_KP5, 0, 0,			/*  1  -> 8   */
+		KEY_F1, KEY_F2, KEY_F3, KEY_F8, KEY_F7, KEY_F6, KEY_F4, KEY_F5,				/*  9  -> 16  */
+/* PTD5 */	KEY_SLASH, KEY_APOSTROPHE, KEY_ENTER, 0, KEY_Z, 0, 0, 0,				/*  17 -> 24  */
+		KEY_X, KEY_C, KEY_V, KEY_DOT, KEY_COMMA, KEY_M, KEY_B, KEY_N,				/*  25 -> 32  */
+/* PTD7 */	KEY_KP2, KEY_KP6, KEY_KP3, 0, 0, 0, 0, 0,						/*  33 -> 40  */
+		KEY_F10, KEY_RO, KEY_F9, KEY_KP4, KEY_NUMLOCK, KEY_SCROLLLOCK, KEY_LEFTALT, KEY_HANJA,	/*  41 -> 48  */
+/* PTE0 */	KEY_KATAKANA, KEY_KP0, KEY_GRAVE, 0, KEY_FINANCE, 0, 0, 0,				/*  49 -> 56  */
+		KEY_KPMINUS, KEY_HIRAGANA, KEY_SPACE, KEY_KPDOT, KEY_VOLUMEUP, 249, 0, 0,		/*  57 -> 64  */
+/* PTE1 */	KEY_SEMICOLON, KEY_RIGHTBRACE, KEY_BACKSLASH, 0, KEY_A, 0, 0, 0,			/*  65 -> 72  */
+		KEY_S, KEY_D, KEY_F, KEY_L, KEY_K, KEY_J, KEY_G, KEY_H,					/*  73 -> 80  */
+/* PTE3 */	KEY_KP8, KEY_LEFTMETA, KEY_RIGHTSHIFT, 0, KEY_TAB, 0, 0, 0,				/*  81 -> 88  */
+		0, KEY_LEFTSHIFT, KEY_KP7, KEY_KP9, KEY_KP1, KEY_F11, KEY_KPPLUS, KEY_KPASTERISK,	/*  89 -> 96  */
+/* PTE6 */	KEY_P, KEY_LEFTBRACE, KEY_BACKSPACE, 0, KEY_Q, 0, 0, 0,					/*  97 -> 104 */
+		KEY_W, KEY_E, KEY_R, KEY_O, KEY_I, KEY_U, KEY_T, KEY_Y,					/* 105 -> 112 */
+/* PTE7 */	KEY_0, KEY_MINUS, KEY_EQUAL, 0, KEY_1, 0, 0, 0,						/* 113 -> 120 */
+		KEY_2, KEY_3, KEY_4, KEY_9, KEY_8, KEY_7, KEY_5, KEY_6,					/* 121 -> 128 */
+/* **** */	0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0
+};
+
+#define JORNADA_SCAN_SIZE	18
+
+struct jornadakbd {
+	struct input_dev *input;
+	unsigned short keymap[ARRAY_SIZE(jornada_scancodes)];
+	unsigned char length;
+	unsigned char old_scan[JORNADA_SCAN_SIZE];
+	unsigned char new_scan[JORNADA_SCAN_SIZE];
+};
+
+static void jornada_parse_kbd(struct jornadakbd *jornadakbd)
+{
+	struct input_dev *input_dev = jornadakbd->input;
+	unsigned short *keymap = jornadakbd->keymap;
+	unsigned int sync_me = 0;
+	unsigned int i, j;
+
+	for (i = 0; i < JORNADA_SCAN_SIZE; i++) {
+		unsigned char new = jornadakbd->new_scan[i];
+		unsigned char old = jornadakbd->old_scan[i];
+		unsigned int xor = new ^ old;
+
+		if (xor == 0)
+			continue;
+
+		for (j = 0; j < 8; j++) {
+			unsigned int bit = 1 << j;
+			if (xor & bit) {
+				unsigned int scancode = (i << 3) + j;
+				input_event(input_dev,
+					    EV_MSC, MSC_SCAN, scancode);
+				input_report_key(input_dev,
+						 keymap[scancode],
+						 !(new & bit));
+				sync_me = 1;
+			}
+		}
+	}
+
+	if (sync_me)
+	    input_sync(input_dev);
+}
+
+static void jornada_scan_keyb(unsigned char *s)
+{
+	int i;
+	unsigned short ec_static, dc_static; /* = UINT16_t */
+	unsigned char matrix_switch[] = {
+		0xfd, 0xff,   /* PTD1 PD(1) */
+		0xdf, 0xff,   /* PTD5 PD(5) */
+		0x7f, 0xff,   /* PTD7 PD(7) */
+		0xff, 0xfe,   /* PTE0 PE(0) */
+		0xff, 0xfd,   /* PTE1 PE(1) */
+		0xff, 0xf7,   /* PTE3 PE(3) */
+		0xff, 0xbf,   /* PTE6 PE(6) */
+		0xff, 0x7f,   /* PTE7 PE(7) */
+	}, *t = matrix_switch;
+	/* PD(x) :
+	1.   0xcc0c & (1~(1 << (2*(x)+1)))))
+	2.   (0xf0cf & 0xfffff) */
+	/* PE(x) :
+	1.   0xcc0c & 0xffff
+	2.   0xf0cf & (1~(1 << (2*(x)+1))))) */
+	unsigned short matrix_PDE[] = {
+		0xcc04, 0xf0cf,  /* PD(1) */
+		0xc40c, 0xf0cf,	 /* PD(5) */
+		0x4c0c, 0xf0cf,  /* PD(7) */
+		0xcc0c, 0xf0cd,  /* PE(0) */
+		0xcc0c, 0xf0c7,	 /* PE(1) */
+		0xcc0c, 0xf04f,  /* PE(3) */
+		0xcc0c, 0xd0cf,	 /* PE(6) */
+		0xcc0c, 0x70cf,	 /* PE(7) */
+	}, *y = matrix_PDE;
+
+	/* Save these control reg bits */
+	dc_static = (__raw_readw(PDCR) & (~0xcc0c));
+	ec_static = (__raw_readw(PECR) & (~0xf0cf));
+
+	for (i = 0; i < 8; i++) {
+		/* disable output for all but the one we want to scan */
+		__raw_writew((dc_static | *y++), PDCR);
+		__raw_writew((ec_static | *y++), PECR);
+		udelay(5);
+
+		/* Get scanline row */
+		__raw_writeb(*t++, PDDR);
+		__raw_writeb(*t++, PEDR);
+		udelay(50);
+
+		/* Read data */
+		*s++ = __raw_readb(PCDR);
+		*s++ = __raw_readb(PFDR);
+	}
+	/* Scan no lines */
+	__raw_writeb(0xff, PDDR);
+	__raw_writeb(0xff, PEDR);
+
+	/* Enable all scanlines */
+	__raw_writew((dc_static | (0x5555 & 0xcc0c)),PDCR);
+	__raw_writew((ec_static | (0x5555 & 0xf0cf)),PECR);
+
+	/* Ignore extra keys and events */
+	*s++ = __raw_readb(PGDR);
+	*s++ = __raw_readb(PHDR);
+}
+
+static void jornadakbd680_poll(struct input_dev *input)
+{
+	struct jornadakbd *jornadakbd = input_get_drvdata(input);
+
+	jornada_scan_keyb(jornadakbd->new_scan);
+	jornada_parse_kbd(jornadakbd);
+	memcpy(jornadakbd->old_scan, jornadakbd->new_scan, JORNADA_SCAN_SIZE);
+}
+
+static int jornada680kbd_probe(struct platform_device *pdev)
+{
+	struct jornadakbd *jornadakbd;
+	struct input_dev *input_dev;
+	int i, error;
+
+	jornadakbd = devm_kzalloc(&pdev->dev, sizeof(struct jornadakbd),
+				  GFP_KERNEL);
+	if (!jornadakbd)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	jornadakbd->input = input_dev;
+
+	memcpy(jornadakbd->keymap, jornada_scancodes,
+		sizeof(jornadakbd->keymap));
+
+	input_set_drvdata(input_dev, jornadakbd);
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+	input_dev->name = "HP Jornada 680 keyboard";
+	input_dev->phys = "jornadakbd/input0";
+	input_dev->keycode = jornadakbd->keymap;
+	input_dev->keycodesize = sizeof(unsigned short);
+	input_dev->keycodemax = ARRAY_SIZE(jornada_scancodes);
+	input_dev->id.bustype = BUS_HOST;
+
+	for (i = 0; i < 128; i++)
+		if (jornadakbd->keymap[i])
+			__set_bit(jornadakbd->keymap[i], input_dev->keybit);
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	error = input_setup_polling(input_dev, jornadakbd680_poll);
+	if (error) {
+		dev_err(&pdev->dev, "failed to set up polling\n");
+		return error;
+	}
+
+	input_set_poll_interval(input_dev, 50 /* msec */);
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static struct platform_driver jornada680kbd_driver = {
+	.driver	= {
+		.name	= "jornada680_kbd",
+	},
+	.probe	= jornada680kbd_probe,
+};
+module_platform_driver(jornada680kbd_driver);
+
+MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
+MODULE_DESCRIPTION("HP Jornada 620/660/680/690 Keyboard Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:jornada680_kbd");
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
new file mode 100644
index 000000000..cd9af5221
--- /dev/null
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/input/keyboard/jornada720_kbd.c
+ *
+ * HP Jornada 720 keyboard platform driver
+ *
+ * Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@Gmail.com>
+ *
+ *    Copyright (C) 2006 jornada 720 kbd driver by
+		Filip Zyzniewsk <Filip.Zyzniewski@tefnet.plX
+ *     based on (C) 2004 jornada 720 kbd driver by
+		Alex Lange <chicken@handhelds.org>
+ */
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <mach/jornada720.h>
+
+MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
+MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
+MODULE_LICENSE("GPL v2");
+
+static unsigned short jornada_std_keymap[128] = {					/* ROW */
+	0, KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7,		/* #1  */
+	KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE,	/*  -> */
+	0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,		/* #2  */
+	KEY_0, KEY_MINUS, KEY_EQUAL,0, 0, 0,						/*  -> */
+	0, KEY_Q, KEY_W, KEY_E, KEY_R, KEY_T, KEY_Y, KEY_U, KEY_I, KEY_O,		/* #3  */
+	KEY_P, KEY_BACKSLASH, KEY_BACKSPACE, 0, 0, 0,					/*  -> */
+	0, KEY_A, KEY_S, KEY_D, KEY_F, KEY_G, KEY_H, KEY_J, KEY_K, KEY_L,		/* #4  */
+	KEY_SEMICOLON, KEY_LEFTBRACE, KEY_RIGHTBRACE, 0, 0, 0,				/*  -> */
+	0, KEY_Z, KEY_X, KEY_C, KEY_V, KEY_B, KEY_N, KEY_M, KEY_COMMA,			/* #5  */
+	KEY_DOT, KEY_KPMINUS, KEY_APOSTROPHE, KEY_ENTER, 0, 0,0,			/*  -> */
+	0, KEY_TAB, 0, KEY_LEFTSHIFT, 0, KEY_APOSTROPHE, 0, 0, 0, 0,			/* #6  */
+	KEY_UP, 0, KEY_RIGHTSHIFT, 0, 0, 0,0, 0, 0, 0, 0, KEY_LEFTALT, KEY_GRAVE,	/*  -> */
+	0, 0, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0,0, KEY_KPASTERISK,		/*  -> */
+	KEY_LEFTCTRL, 0, KEY_SPACE, 0, 0, 0, KEY_SLASH, KEY_DELETE, 0, 0,		/*  -> */
+	0, 0, 0, KEY_POWER,								/*  -> */
+};
+
+struct jornadakbd {
+	unsigned short keymap[ARRAY_SIZE(jornada_std_keymap)];
+	struct input_dev *input;
+};
+
+static irqreturn_t jornada720_kbd_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct jornadakbd *jornadakbd = platform_get_drvdata(pdev);
+	struct input_dev *input = jornadakbd->input;
+	u8 count, kbd_data, scan_code;
+
+	/* startup ssp with spinlock */
+	jornada_ssp_start();
+
+	if (jornada_ssp_inout(GETSCANKEYCODE) != TXDUMMY) {
+		dev_dbg(&pdev->dev,
+			"GetKeycode command failed with ETIMEDOUT, flushed bus\n");
+	} else {
+		/* How many keycodes are waiting for us? */
+		count = jornada_ssp_byte(TXDUMMY);
+
+		/* Lets drag them out one at a time */
+		while (count--) {
+			/* Exchange TxDummy for location (keymap[kbddata]) */
+			kbd_data = jornada_ssp_byte(TXDUMMY);
+			scan_code = kbd_data & 0x7f;
+
+			input_event(input, EV_MSC, MSC_SCAN, scan_code);
+			input_report_key(input, jornadakbd->keymap[scan_code],
+					 !(kbd_data & 0x80));
+			input_sync(input);
+		}
+	}
+
+	/* release spinlock and turn off ssp */
+	jornada_ssp_end();
+
+	return IRQ_HANDLED;
+};
+
+static int jornada720_kbd_probe(struct platform_device *pdev)
+{
+	struct jornadakbd *jornadakbd;
+	struct input_dev *input_dev;
+	int i, err, irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return irq < 0 ? irq : -EINVAL;
+
+	jornadakbd = devm_kzalloc(&pdev->dev, sizeof(*jornadakbd), GFP_KERNEL);
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!jornadakbd || !input_dev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, jornadakbd);
+
+	memcpy(jornadakbd->keymap, jornada_std_keymap,
+		sizeof(jornada_std_keymap));
+	jornadakbd->input = input_dev;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+	input_dev->name = "HP Jornada 720 keyboard";
+	input_dev->phys = "jornadakbd/input0";
+	input_dev->keycode = jornadakbd->keymap;
+	input_dev->keycodesize = sizeof(unsigned short);
+	input_dev->keycodemax = ARRAY_SIZE(jornada_std_keymap);
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &pdev->dev;
+
+	for (i = 0; i < ARRAY_SIZE(jornadakbd->keymap); i++)
+		__set_bit(jornadakbd->keymap[i], input_dev->keybit);
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	err = devm_request_irq(&pdev->dev, irq, jornada720_kbd_interrupt,
+			       IRQF_TRIGGER_FALLING, "jornadakbd", pdev);
+	if (err) {
+		dev_err(&pdev->dev, "unable to grab IRQ%d: %d\n", irq, err);
+		return err;
+	}
+
+	return input_register_device(jornadakbd->input);
+};
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:jornada720_kbd");
+
+static struct platform_driver jornada720_kbd_driver = {
+	.driver  = {
+		.name    = "jornada720_kbd",
+	 },
+	.probe   = jornada720_kbd_probe,
+};
+module_platform_driver(jornada720_kbd_driver);
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
new file mode 100644
index 000000000..e4a1839ca
--- /dev/null
+++ b/drivers/input/keyboard/lkkbd.c
@@ -0,0 +1,721 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2004 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
+ */
+
+/*
+ * LK keyboard driver for Linux, based on sunkbd.c (C) by Vojtech Pavlik
+ */
+
+/*
+ * DEC LK201 and LK401 keyboard driver for Linux (primary for DECstations
+ * and VAXstations, but can also be used on any standard RS232 with an
+ * adaptor).
+ *
+ * DISCLAIMER: This works for _me_. If you break anything by using the
+ * information given below, I will _not_ be liable!
+ *
+ * RJ10 pinout:		To DE9:		Or DB25:
+ *	1 - RxD <---->	Pin 3 (TxD) <->	Pin 2 (TxD)
+ *	2 - GND <---->	Pin 5 (GND) <->	Pin 7 (GND)
+ *	4 - TxD <---->	Pin 2 (RxD) <->	Pin 3 (RxD)
+ *	3 - +12V (from HDD drive connector), DON'T connect to DE9 or DB25!!!
+ *
+ * Pin numbers for DE9 and DB25 are noted on the plug (quite small:). For
+ * RJ10, it's like this:
+ *
+ *      __=__	Hold the plug in front of you, cable downwards,
+ *     /___/|	nose is hidden behind the plug. Now, pin 1 is at
+ *    |1234||	the left side, pin 4 at the right and 2 and 3 are
+ *    |IIII||	in between, of course:)
+ *    |    ||
+ *    |____|/
+ *      ||	So the adaptor consists of three connected cables
+ *      ||	for data transmission (RxD and TxD) and signal ground.
+ *		Additionally, you have to get +12V from somewhere.
+ * Most easily, you'll get that from a floppy or HDD power connector.
+ * It's the yellow cable there (black is ground and red is +5V).
+ *
+ * The keyboard and all the commands it understands are documented in
+ * "VCB02 Video Subsystem - Technical Manual", EK-104AA-TM-001. This
+ * document is LK201 specific, but LK401 is mostly compatible. It comes
+ * up in LK201 mode and doesn't report any of the additional keys it
+ * has. These need to be switched on with the LK_CMD_ENABLE_LK401
+ * command. You'll find this document (scanned .pdf file) on MANX,
+ * a search engine specific to DEC documentation. Try
+ * http://www.vt100.net/manx/details?pn=EK-104AA-TM-001;id=21;cp=1
+ */
+
+/*
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/workqueue.h>
+
+#define DRIVER_DESC	"LK keyboard driver"
+
+MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Known parameters:
+ *	bell_volume
+ *	keyclick_volume
+ *	ctrlclick_volume
+ *
+ * Please notice that there's not yet an API to set these at runtime.
+ */
+static int bell_volume = 100; /* % */
+module_param(bell_volume, int, 0);
+MODULE_PARM_DESC(bell_volume, "Bell volume (in %). default is 100%");
+
+static int keyclick_volume = 100; /* % */
+module_param(keyclick_volume, int, 0);
+MODULE_PARM_DESC(keyclick_volume, "Keyclick volume (in %), default is 100%");
+
+static int ctrlclick_volume = 100; /* % */
+module_param(ctrlclick_volume, int, 0);
+MODULE_PARM_DESC(ctrlclick_volume, "Ctrlclick volume (in %), default is 100%");
+
+static int lk201_compose_is_alt;
+module_param(lk201_compose_is_alt, int, 0);
+MODULE_PARM_DESC(lk201_compose_is_alt,
+		 "If set non-zero, LK201' Compose key will act as an Alt key");
+
+
+
+#undef LKKBD_DEBUG
+#ifdef LKKBD_DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...) do {} while (0)
+#endif
+
+/* LED control */
+#define LK_LED_WAIT		0x81
+#define LK_LED_COMPOSE		0x82
+#define LK_LED_SHIFTLOCK	0x84
+#define LK_LED_SCROLLLOCK	0x88
+#define LK_CMD_LED_ON		0x13
+#define LK_CMD_LED_OFF		0x11
+
+/* Mode control */
+#define LK_MODE_DOWN		0x80
+#define LK_MODE_AUTODOWN	0x82
+#define LK_MODE_UPDOWN		0x86
+#define LK_CMD_SET_MODE(mode, div)	((mode) | ((div) << 3))
+
+/* Misc commands */
+#define LK_CMD_ENABLE_KEYCLICK	0x1b
+#define LK_CMD_DISABLE_KEYCLICK	0x99
+#define LK_CMD_DISABLE_BELL	0xa1
+#define LK_CMD_SOUND_BELL	0xa7
+#define LK_CMD_ENABLE_BELL	0x23
+#define LK_CMD_DISABLE_CTRCLICK	0xb9
+#define LK_CMD_ENABLE_CTRCLICK	0xbb
+#define LK_CMD_SET_DEFAULTS	0xd3
+#define LK_CMD_POWERCYCLE_RESET	0xfd
+#define LK_CMD_ENABLE_LK401	0xe9
+#define LK_CMD_REQUEST_ID	0xab
+
+/* Misc responses from keyboard */
+#define LK_STUCK_KEY		0x3d
+#define LK_SELFTEST_FAILED	0x3e
+#define LK_ALL_KEYS_UP		0xb3
+#define LK_METRONOME		0xb4
+#define LK_OUTPUT_ERROR		0xb5
+#define LK_INPUT_ERROR		0xb6
+#define LK_KBD_LOCKED		0xb7
+#define LK_KBD_TEST_MODE_ACK	0xb8
+#define LK_PREFIX_KEY_DOWN	0xb9
+#define LK_MODE_CHANGE_ACK	0xba
+#define LK_RESPONSE_RESERVED	0xbb
+
+#define LK_NUM_KEYCODES		256
+#define LK_NUM_IGNORE_BYTES	6
+
+static unsigned short lkkbd_keycode[LK_NUM_KEYCODES] = {
+	[0x56] = KEY_F1,
+	[0x57] = KEY_F2,
+	[0x58] = KEY_F3,
+	[0x59] = KEY_F4,
+	[0x5a] = KEY_F5,
+	[0x64] = KEY_F6,
+	[0x65] = KEY_F7,
+	[0x66] = KEY_F8,
+	[0x67] = KEY_F9,
+	[0x68] = KEY_F10,
+	[0x71] = KEY_F11,
+	[0x72] = KEY_F12,
+	[0x73] = KEY_F13,
+	[0x74] = KEY_F14,
+	[0x7c] = KEY_F15,
+	[0x7d] = KEY_F16,
+	[0x80] = KEY_F17,
+	[0x81] = KEY_F18,
+	[0x82] = KEY_F19,
+	[0x83] = KEY_F20,
+	[0x8a] = KEY_FIND,
+	[0x8b] = KEY_INSERT,
+	[0x8c] = KEY_DELETE,
+	[0x8d] = KEY_SELECT,
+	[0x8e] = KEY_PAGEUP,
+	[0x8f] = KEY_PAGEDOWN,
+	[0x92] = KEY_KP0,
+	[0x94] = KEY_KPDOT,
+	[0x95] = KEY_KPENTER,
+	[0x96] = KEY_KP1,
+	[0x97] = KEY_KP2,
+	[0x98] = KEY_KP3,
+	[0x99] = KEY_KP4,
+	[0x9a] = KEY_KP5,
+	[0x9b] = KEY_KP6,
+	[0x9c] = KEY_KPCOMMA,
+	[0x9d] = KEY_KP7,
+	[0x9e] = KEY_KP8,
+	[0x9f] = KEY_KP9,
+	[0xa0] = KEY_KPMINUS,
+	[0xa1] = KEY_PROG1,
+	[0xa2] = KEY_PROG2,
+	[0xa3] = KEY_PROG3,
+	[0xa4] = KEY_PROG4,
+	[0xa7] = KEY_LEFT,
+	[0xa8] = KEY_RIGHT,
+	[0xa9] = KEY_DOWN,
+	[0xaa] = KEY_UP,
+	[0xab] = KEY_RIGHTSHIFT,
+	[0xac] = KEY_LEFTALT,
+	[0xad] = KEY_COMPOSE, /* Right Compose, that is. */
+	[0xae] = KEY_LEFTSHIFT, /* Same as KEY_RIGHTSHIFT on LK201 */
+	[0xaf] = KEY_LEFTCTRL,
+	[0xb0] = KEY_CAPSLOCK,
+	[0xb1] = KEY_COMPOSE, /* Left Compose, that is. */
+	[0xb2] = KEY_RIGHTALT,
+	[0xbc] = KEY_BACKSPACE,
+	[0xbd] = KEY_ENTER,
+	[0xbe] = KEY_TAB,
+	[0xbf] = KEY_ESC,
+	[0xc0] = KEY_1,
+	[0xc1] = KEY_Q,
+	[0xc2] = KEY_A,
+	[0xc3] = KEY_Z,
+	[0xc5] = KEY_2,
+	[0xc6] = KEY_W,
+	[0xc7] = KEY_S,
+	[0xc8] = KEY_X,
+	[0xc9] = KEY_102ND,
+	[0xcb] = KEY_3,
+	[0xcc] = KEY_E,
+	[0xcd] = KEY_D,
+	[0xce] = KEY_C,
+	[0xd0] = KEY_4,
+	[0xd1] = KEY_R,
+	[0xd2] = KEY_F,
+	[0xd3] = KEY_V,
+	[0xd4] = KEY_SPACE,
+	[0xd6] = KEY_5,
+	[0xd7] = KEY_T,
+	[0xd8] = KEY_G,
+	[0xd9] = KEY_B,
+	[0xdb] = KEY_6,
+	[0xdc] = KEY_Y,
+	[0xdd] = KEY_H,
+	[0xde] = KEY_N,
+	[0xe0] = KEY_7,
+	[0xe1] = KEY_U,
+	[0xe2] = KEY_J,
+	[0xe3] = KEY_M,
+	[0xe5] = KEY_8,
+	[0xe6] = KEY_I,
+	[0xe7] = KEY_K,
+	[0xe8] = KEY_COMMA,
+	[0xea] = KEY_9,
+	[0xeb] = KEY_O,
+	[0xec] = KEY_L,
+	[0xed] = KEY_DOT,
+	[0xef] = KEY_0,
+	[0xf0] = KEY_P,
+	[0xf2] = KEY_SEMICOLON,
+	[0xf3] = KEY_SLASH,
+	[0xf5] = KEY_EQUAL,
+	[0xf6] = KEY_RIGHTBRACE,
+	[0xf7] = KEY_BACKSLASH,
+	[0xf9] = KEY_MINUS,
+	[0xfa] = KEY_LEFTBRACE,
+	[0xfb] = KEY_APOSTROPHE,
+};
+
+#define CHECK_LED(LK, VAR_ON, VAR_OFF, LED, BITS) do {		\
+	if (test_bit(LED, (LK)->dev->led))			\
+		VAR_ON |= BITS;					\
+	else							\
+		VAR_OFF |= BITS;				\
+	} while (0)
+
+/*
+ * Per-keyboard data
+ */
+struct lkkbd {
+	unsigned short keycode[LK_NUM_KEYCODES];
+	int ignore_bytes;
+	unsigned char id[LK_NUM_IGNORE_BYTES];
+	struct input_dev *dev;
+	struct serio *serio;
+	struct work_struct tq;
+	char name[64];
+	char phys[32];
+	char type;
+	int bell_volume;
+	int keyclick_volume;
+	int ctrlclick_volume;
+};
+
+#ifdef LKKBD_DEBUG
+/*
+ * Responses from the keyboard and mapping back to their names.
+ */
+static struct {
+	unsigned char value;
+	unsigned char *name;
+} lk_response[] = {
+#define RESPONSE(x) { .value = (x), .name = #x, }
+	RESPONSE(LK_STUCK_KEY),
+	RESPONSE(LK_SELFTEST_FAILED),
+	RESPONSE(LK_ALL_KEYS_UP),
+	RESPONSE(LK_METRONOME),
+	RESPONSE(LK_OUTPUT_ERROR),
+	RESPONSE(LK_INPUT_ERROR),
+	RESPONSE(LK_KBD_LOCKED),
+	RESPONSE(LK_KBD_TEST_MODE_ACK),
+	RESPONSE(LK_PREFIX_KEY_DOWN),
+	RESPONSE(LK_MODE_CHANGE_ACK),
+	RESPONSE(LK_RESPONSE_RESERVED),
+#undef RESPONSE
+};
+
+static unsigned char *response_name(unsigned char value)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lk_response); i++)
+		if (lk_response[i].value == value)
+			return lk_response[i].name;
+
+	return "<unknown>";
+}
+#endif /* LKKBD_DEBUG */
+
+/*
+ * Calculate volume parameter byte for a given volume.
+ */
+static unsigned char volume_to_hw(int volume_percent)
+{
+	unsigned char ret = 0;
+
+	if (volume_percent < 0)
+		volume_percent = 0;
+	if (volume_percent > 100)
+		volume_percent = 100;
+
+	if (volume_percent >= 0)
+		ret = 7;
+	if (volume_percent >= 13)	/* 12.5 */
+		ret = 6;
+	if (volume_percent >= 25)
+		ret = 5;
+	if (volume_percent >= 38)	/* 37.5 */
+		ret = 4;
+	if (volume_percent >= 50)
+		ret = 3;
+	if (volume_percent >= 63)	/* 62.5 */
+		ret = 2;		/* This is the default volume */
+	if (volume_percent >= 75)
+		ret = 1;
+	if (volume_percent >= 88)	/* 87.5 */
+		ret = 0;
+
+	ret |= 0x80;
+
+	return ret;
+}
+
+static void lkkbd_detection_done(struct lkkbd *lk)
+{
+	int i;
+
+	/*
+	 * Reset setting for Compose key. Let Compose be KEY_COMPOSE.
+	 */
+	lk->keycode[0xb1] = KEY_COMPOSE;
+
+	/*
+	 * Print keyboard name and modify Compose=Alt on user's request.
+	 */
+	switch (lk->id[4]) {
+	case 1:
+		strlcpy(lk->name, "DEC LK201 keyboard", sizeof(lk->name));
+
+		if (lk201_compose_is_alt)
+			lk->keycode[0xb1] = KEY_LEFTALT;
+		break;
+
+	case 2:
+		strlcpy(lk->name, "DEC LK401 keyboard", sizeof(lk->name));
+		break;
+
+	default:
+		strlcpy(lk->name, "Unknown DEC keyboard", sizeof(lk->name));
+		printk(KERN_ERR
+			"lkkbd: keyboard on %s is unknown, please report to "
+			"Jan-Benedict Glaw <jbglaw@lug-owl.de>\n", lk->phys);
+		printk(KERN_ERR "lkkbd: keyboard ID'ed as:");
+		for (i = 0; i < LK_NUM_IGNORE_BYTES; i++)
+			printk(" 0x%02x", lk->id[i]);
+		printk("\n");
+		break;
+	}
+
+	printk(KERN_INFO "lkkbd: keyboard on %s identified as: %s\n",
+		lk->phys, lk->name);
+
+	/*
+	 * Report errors during keyboard boot-up.
+	 */
+	switch (lk->id[2]) {
+	case 0x00:
+		/* All okay */
+		break;
+
+	case LK_STUCK_KEY:
+		printk(KERN_ERR "lkkbd: Stuck key on keyboard at %s\n",
+			lk->phys);
+		break;
+
+	case LK_SELFTEST_FAILED:
+		printk(KERN_ERR
+			"lkkbd: Selftest failed on keyboard at %s, "
+			"keyboard may not work properly\n", lk->phys);
+		break;
+
+	default:
+		printk(KERN_ERR
+			"lkkbd: Unknown error %02x on keyboard at %s\n",
+			lk->id[2], lk->phys);
+		break;
+	}
+
+	/*
+	 * Try to hint user if there's a stuck key.
+	 */
+	if (lk->id[2] == LK_STUCK_KEY && lk->id[3] != 0)
+		printk(KERN_ERR
+			"Scancode of stuck key is 0x%02x, keycode is 0x%04x\n",
+			lk->id[3], lk->keycode[lk->id[3]]);
+}
+
+/*
+ * lkkbd_interrupt() is called by the low level driver when a character
+ * is received.
+ */
+static irqreturn_t lkkbd_interrupt(struct serio *serio,
+				   unsigned char data, unsigned int flags)
+{
+	struct lkkbd *lk = serio_get_drvdata(serio);
+	struct input_dev *input_dev = lk->dev;
+	unsigned int keycode;
+	int i;
+
+	DBG(KERN_INFO "Got byte 0x%02x\n", data);
+
+	if (lk->ignore_bytes > 0) {
+		DBG(KERN_INFO "Ignoring a byte on %s\n", lk->name);
+		lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
+
+		if (lk->ignore_bytes == 0)
+			lkkbd_detection_done(lk);
+
+		return IRQ_HANDLED;
+	}
+
+	switch (data) {
+	case LK_ALL_KEYS_UP:
+		for (i = 0; i < ARRAY_SIZE(lkkbd_keycode); i++)
+			input_report_key(input_dev, lk->keycode[i], 0);
+		input_sync(input_dev);
+		break;
+
+	case 0x01:
+		DBG(KERN_INFO "Got 0x01, scheduling re-initialization\n");
+		lk->ignore_bytes = LK_NUM_IGNORE_BYTES;
+		lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
+		schedule_work(&lk->tq);
+		break;
+
+	case LK_METRONOME:
+	case LK_OUTPUT_ERROR:
+	case LK_INPUT_ERROR:
+	case LK_KBD_LOCKED:
+	case LK_KBD_TEST_MODE_ACK:
+	case LK_PREFIX_KEY_DOWN:
+	case LK_MODE_CHANGE_ACK:
+	case LK_RESPONSE_RESERVED:
+		DBG(KERN_INFO "Got %s and don't know how to handle...\n",
+			response_name(data));
+		break;
+
+	default:
+		keycode = lk->keycode[data];
+		if (keycode != KEY_RESERVED) {
+			input_report_key(input_dev, keycode,
+					 !test_bit(keycode, input_dev->key));
+			input_sync(input_dev);
+		} else {
+			printk(KERN_WARNING
+				"%s: Unknown key with scancode 0x%02x on %s.\n",
+				__FILE__, data, lk->name);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void lkkbd_toggle_leds(struct lkkbd *lk)
+{
+	struct serio *serio = lk->serio;
+	unsigned char leds_on = 0;
+	unsigned char leds_off = 0;
+
+	CHECK_LED(lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK);
+	CHECK_LED(lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE);
+	CHECK_LED(lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK);
+	CHECK_LED(lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT);
+	if (leds_on != 0) {
+		serio_write(serio, LK_CMD_LED_ON);
+		serio_write(serio, leds_on);
+	}
+	if (leds_off != 0) {
+		serio_write(serio, LK_CMD_LED_OFF);
+		serio_write(serio, leds_off);
+	}
+}
+
+static void lkkbd_toggle_keyclick(struct lkkbd *lk, bool on)
+{
+	struct serio *serio = lk->serio;
+
+	if (on) {
+		DBG("%s: Activating key clicks\n", __func__);
+		serio_write(serio, LK_CMD_ENABLE_KEYCLICK);
+		serio_write(serio, volume_to_hw(lk->keyclick_volume));
+		serio_write(serio, LK_CMD_ENABLE_CTRCLICK);
+		serio_write(serio, volume_to_hw(lk->ctrlclick_volume));
+	} else {
+		DBG("%s: Deactivating key clicks\n", __func__);
+		serio_write(serio, LK_CMD_DISABLE_KEYCLICK);
+		serio_write(serio, LK_CMD_DISABLE_CTRCLICK);
+	}
+
+}
+
+/*
+ * lkkbd_event() handles events from the input module.
+ */
+static int lkkbd_event(struct input_dev *dev,
+			unsigned int type, unsigned int code, int value)
+{
+	struct lkkbd *lk = input_get_drvdata(dev);
+
+	switch (type) {
+	case EV_LED:
+		lkkbd_toggle_leds(lk);
+		return 0;
+
+	case EV_SND:
+		switch (code) {
+		case SND_CLICK:
+			lkkbd_toggle_keyclick(lk, value);
+			return 0;
+
+		case SND_BELL:
+			if (value != 0)
+				serio_write(lk->serio, LK_CMD_SOUND_BELL);
+
+			return 0;
+		}
+
+		break;
+
+	default:
+		printk(KERN_ERR "%s(): Got unknown type %d, code %d, value %d\n",
+			__func__, type, code, value);
+	}
+
+	return -1;
+}
+
+/*
+ * lkkbd_reinit() sets leds and beeps to a state the computer remembers they
+ * were in.
+ */
+static void lkkbd_reinit(struct work_struct *work)
+{
+	struct lkkbd *lk = container_of(work, struct lkkbd, tq);
+	int division;
+
+	/* Ask for ID */
+	serio_write(lk->serio, LK_CMD_REQUEST_ID);
+
+	/* Reset parameters */
+	serio_write(lk->serio, LK_CMD_SET_DEFAULTS);
+
+	/* Set LEDs */
+	lkkbd_toggle_leds(lk);
+
+	/*
+	 * Try to activate extended LK401 mode. This command will
+	 * only work with a LK401 keyboard and grants access to
+	 * LAlt, RAlt, RCompose and RShift.
+	 */
+	serio_write(lk->serio, LK_CMD_ENABLE_LK401);
+
+	/* Set all keys to UPDOWN mode */
+	for (division = 1; division <= 14; division++)
+		serio_write(lk->serio,
+			    LK_CMD_SET_MODE(LK_MODE_UPDOWN, division));
+
+	/* Enable bell and set volume */
+	serio_write(lk->serio, LK_CMD_ENABLE_BELL);
+	serio_write(lk->serio, volume_to_hw(lk->bell_volume));
+
+	/* Enable/disable keyclick (and possibly set volume) */
+	lkkbd_toggle_keyclick(lk, test_bit(SND_CLICK, lk->dev->snd));
+
+	/* Sound the bell if needed */
+	if (test_bit(SND_BELL, lk->dev->snd))
+		serio_write(lk->serio, LK_CMD_SOUND_BELL);
+}
+
+/*
+ * lkkbd_connect() probes for a LK keyboard and fills the necessary structures.
+ */
+static int lkkbd_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct lkkbd *lk;
+	struct input_dev *input_dev;
+	int i;
+	int err;
+
+	lk = kzalloc(sizeof(struct lkkbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!lk || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	lk->serio = serio;
+	lk->dev = input_dev;
+	INIT_WORK(&lk->tq, lkkbd_reinit);
+	lk->bell_volume = bell_volume;
+	lk->keyclick_volume = keyclick_volume;
+	lk->ctrlclick_volume = ctrlclick_volume;
+	memcpy(lk->keycode, lkkbd_keycode, sizeof(lk->keycode));
+
+	strlcpy(lk->name, "DEC LK keyboard", sizeof(lk->name));
+	snprintf(lk->phys, sizeof(lk->phys), "%s/input0", serio->phys);
+
+	input_dev->name = lk->name;
+	input_dev->phys = lk->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_LKKBD;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->event = lkkbd_event;
+
+	input_set_drvdata(input_dev, lk);
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_LED, input_dev->evbit);
+	__set_bit(EV_SND, input_dev->evbit);
+	__set_bit(EV_REP, input_dev->evbit);
+	__set_bit(LED_CAPSL, input_dev->ledbit);
+	__set_bit(LED_SLEEP, input_dev->ledbit);
+	__set_bit(LED_COMPOSE, input_dev->ledbit);
+	__set_bit(LED_SCROLLL, input_dev->ledbit);
+	__set_bit(SND_BELL, input_dev->sndbit);
+	__set_bit(SND_CLICK, input_dev->sndbit);
+
+	input_dev->keycode = lk->keycode;
+	input_dev->keycodesize = sizeof(lk->keycode[0]);
+	input_dev->keycodemax = ARRAY_SIZE(lk->keycode);
+
+	for (i = 0; i < LK_NUM_KEYCODES; i++)
+		__set_bit(lk->keycode[i], input_dev->keybit);
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	serio_set_drvdata(serio, lk);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(lk->dev);
+	if (err)
+		goto fail3;
+
+	serio_write(lk->serio, LK_CMD_POWERCYCLE_RESET);
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(lk);
+	return err;
+}
+
+/*
+ * lkkbd_disconnect() unregisters and closes behind us.
+ */
+static void lkkbd_disconnect(struct serio *serio)
+{
+	struct lkkbd *lk = serio_get_drvdata(serio);
+
+	input_get_device(lk->dev);
+	input_unregister_device(lk->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(lk->dev);
+	kfree(lk);
+}
+
+static const struct serio_device_id lkkbd_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_LKKBD,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, lkkbd_serio_ids);
+
+static struct serio_driver lkkbd_drv = {
+	.driver		= {
+		.name	= "lkkbd",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= lkkbd_serio_ids,
+	.connect	= lkkbd_connect,
+	.disconnect	= lkkbd_disconnect,
+	.interrupt	= lkkbd_interrupt,
+};
+
+module_serio_driver(lkkbd_drv);
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
new file mode 100644
index 000000000..6c38d034e
--- /dev/null
+++ b/drivers/input/keyboard/lm8323.c
@@ -0,0 +1,847 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/i2c/chips/lm8323.c
+ *
+ * Copyright (C) 2007-2009 Nokia Corporation
+ *
+ * Written by Daniel Stone <daniel.stone@nokia.com>
+ *            Timo O. Karjalainen <timo.o.karjalainen@nokia.com>
+ *
+ * Updated by Felipe Balbi <felipe.balbi@nokia.com>
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/platform_data/lm8323.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+
+/* Commands to send to the chip. */
+#define LM8323_CMD_READ_ID		0x80 /* Read chip ID. */
+#define LM8323_CMD_WRITE_CFG		0x81 /* Set configuration item. */
+#define LM8323_CMD_READ_INT		0x82 /* Get interrupt status. */
+#define LM8323_CMD_RESET		0x83 /* Reset, same as external one */
+#define LM8323_CMD_WRITE_PORT_SEL	0x85 /* Set GPIO in/out. */
+#define LM8323_CMD_WRITE_PORT_STATE	0x86 /* Set GPIO pullup. */
+#define LM8323_CMD_READ_PORT_SEL	0x87 /* Get GPIO in/out. */
+#define LM8323_CMD_READ_PORT_STATE	0x88 /* Get GPIO pullup. */
+#define LM8323_CMD_READ_FIFO		0x89 /* Read byte from FIFO. */
+#define LM8323_CMD_RPT_READ_FIFO	0x8a /* Read FIFO (no increment). */
+#define LM8323_CMD_SET_ACTIVE		0x8b /* Set active time. */
+#define LM8323_CMD_READ_ERR		0x8c /* Get error status. */
+#define LM8323_CMD_READ_ROTATOR		0x8e /* Read rotator status. */
+#define LM8323_CMD_SET_DEBOUNCE		0x8f /* Set debouncing time. */
+#define LM8323_CMD_SET_KEY_SIZE		0x90 /* Set keypad size. */
+#define LM8323_CMD_READ_KEY_SIZE	0x91 /* Get keypad size. */
+#define LM8323_CMD_READ_CFG		0x92 /* Get configuration item. */
+#define LM8323_CMD_WRITE_CLOCK		0x93 /* Set clock config. */
+#define LM8323_CMD_READ_CLOCK		0x94 /* Get clock config. */
+#define LM8323_CMD_PWM_WRITE		0x95 /* Write PWM script. */
+#define LM8323_CMD_START_PWM		0x96 /* Start PWM engine. */
+#define LM8323_CMD_STOP_PWM		0x97 /* Stop PWM engine. */
+
+/* Interrupt status. */
+#define INT_KEYPAD			0x01 /* Key event. */
+#define INT_ROTATOR			0x02 /* Rotator event. */
+#define INT_ERROR			0x08 /* Error: use CMD_READ_ERR. */
+#define INT_NOINIT			0x10 /* Lost configuration. */
+#define INT_PWM1			0x20 /* PWM1 stopped. */
+#define INT_PWM2			0x40 /* PWM2 stopped. */
+#define INT_PWM3			0x80 /* PWM3 stopped. */
+
+/* Errors (signalled by INT_ERROR, read with CMD_READ_ERR). */
+#define ERR_BADPAR			0x01 /* Bad parameter. */
+#define ERR_CMDUNK			0x02 /* Unknown command. */
+#define ERR_KEYOVR			0x04 /* Too many keys pressed. */
+#define ERR_FIFOOVER			0x40 /* FIFO overflow. */
+
+/* Configuration keys (CMD_{WRITE,READ}_CFG). */
+#define CFG_MUX1SEL			0x01 /* Select MUX1_OUT input. */
+#define CFG_MUX1EN			0x02 /* Enable MUX1_OUT. */
+#define CFG_MUX2SEL			0x04 /* Select MUX2_OUT input. */
+#define CFG_MUX2EN			0x08 /* Enable MUX2_OUT. */
+#define CFG_PSIZE			0x20 /* Package size (must be 0). */
+#define CFG_ROTEN			0x40 /* Enable rotator. */
+
+/* Clock settings (CMD_{WRITE,READ}_CLOCK). */
+#define CLK_RCPWM_INTERNAL		0x00
+#define CLK_RCPWM_EXTERNAL		0x03
+#define CLK_SLOWCLKEN			0x08 /* Enable 32.768kHz clock. */
+#define CLK_SLOWCLKOUT			0x40 /* Enable slow pulse output. */
+
+/* The possible addresses corresponding to CONFIG1 and CONFIG2 pin wirings. */
+#define LM8323_I2C_ADDR00		(0x84 >> 1)	/* 1000 010x */
+#define LM8323_I2C_ADDR01		(0x86 >> 1)	/* 1000 011x */
+#define LM8323_I2C_ADDR10		(0x88 >> 1)	/* 1000 100x */
+#define LM8323_I2C_ADDR11		(0x8A >> 1)	/* 1000 101x */
+
+/* Key event fifo length */
+#define LM8323_FIFO_LEN			15
+
+/* Commands for PWM engine; feed in with PWM_WRITE. */
+/* Load ramp counter from duty cycle field (range 0 - 0xff). */
+#define PWM_SET(v)			(0x4000 | ((v) & 0xff))
+/* Go to start of script. */
+#define PWM_GOTOSTART			0x0000
+/*
+ * Stop engine (generates interrupt).  If reset is 1, clear the program
+ * counter, else leave it.
+ */
+#define PWM_END(reset)			(0xc000 | (!!(reset) << 11))
+/*
+ * Ramp.  If s is 1, divide clock by 512, else divide clock by 16.
+ * Take t clock scales (up to 63) per step, for n steps (up to 126).
+ * If u is set, ramp up, else ramp down.
+ */
+#define PWM_RAMP(s, t, n, u)		((!!(s) << 14) | ((t) & 0x3f) << 8 | \
+					 ((n) & 0x7f) | ((u) ? 0 : 0x80))
+/*
+ * Loop (i.e. jump back to pos) for a given number of iterations (up to 63).
+ * If cnt is zero, execute until PWM_END is encountered.
+ */
+#define PWM_LOOP(cnt, pos)		(0xa000 | (((cnt) & 0x3f) << 7) | \
+					 ((pos) & 0x3f))
+/*
+ * Wait for trigger.  Argument is a mask of channels, shifted by the channel
+ * number, e.g. 0xa for channels 3 and 1.  Note that channels are numbered
+ * from 1, not 0.
+ */
+#define PWM_WAIT_TRIG(chans)		(0xe000 | (((chans) & 0x7) << 6))
+/* Send trigger.  Argument is same as PWM_WAIT_TRIG. */
+#define PWM_SEND_TRIG(chans)		(0xe000 | ((chans) & 0x7))
+
+struct lm8323_pwm {
+	int			id;
+	int			fade_time;
+	int			brightness;
+	int			desired_brightness;
+	bool			enabled;
+	bool			running;
+	/* pwm lock */
+	struct mutex		lock;
+	struct work_struct	work;
+	struct led_classdev	cdev;
+	struct lm8323_chip	*chip;
+};
+
+struct lm8323_chip {
+	/* device lock */
+	struct mutex		lock;
+	struct i2c_client	*client;
+	struct input_dev	*idev;
+	bool			kp_enabled;
+	bool			pm_suspend;
+	unsigned		keys_down;
+	char			phys[32];
+	unsigned short		keymap[LM8323_KEYMAP_SIZE];
+	int			size_x;
+	int			size_y;
+	int			debounce_time;
+	int			active_time;
+	struct lm8323_pwm	pwm[LM8323_NUM_PWMS];
+};
+
+#define client_to_lm8323(c)	container_of(c, struct lm8323_chip, client)
+#define dev_to_lm8323(d)	container_of(d, struct lm8323_chip, client->dev)
+#define cdev_to_pwm(c)		container_of(c, struct lm8323_pwm, cdev)
+#define work_to_pwm(w)		container_of(w, struct lm8323_pwm, work)
+
+#define LM8323_MAX_DATA 8
+
+/*
+ * To write, we just access the chip's address in write mode, and dump the
+ * command and data out on the bus.  The command byte and data are taken as
+ * sequential u8s out of varargs, to a maximum of LM8323_MAX_DATA.
+ */
+static int lm8323_write(struct lm8323_chip *lm, int len, ...)
+{
+	int ret, i;
+	va_list ap;
+	u8 data[LM8323_MAX_DATA];
+
+	va_start(ap, len);
+
+	if (unlikely(len > LM8323_MAX_DATA)) {
+		dev_err(&lm->client->dev, "tried to send %d bytes\n", len);
+		va_end(ap);
+		return 0;
+	}
+
+	for (i = 0; i < len; i++)
+		data[i] = va_arg(ap, int);
+
+	va_end(ap);
+
+	/*
+	 * If the host is asleep while we send the data, we can get a NACK
+	 * back while it wakes up, so try again, once.
+	 */
+	ret = i2c_master_send(lm->client, data, len);
+	if (unlikely(ret == -EREMOTEIO))
+		ret = i2c_master_send(lm->client, data, len);
+	if (unlikely(ret != len))
+		dev_err(&lm->client->dev, "sent %d bytes of %d total\n",
+			len, ret);
+
+	return ret;
+}
+
+/*
+ * To read, we first send the command byte to the chip and end the transaction,
+ * then access the chip in read mode, at which point it will send the data.
+ */
+static int lm8323_read(struct lm8323_chip *lm, u8 cmd, u8 *buf, int len)
+{
+	int ret;
+
+	/*
+	 * If the host is asleep while we send the byte, we can get a NACK
+	 * back while it wakes up, so try again, once.
+	 */
+	ret = i2c_master_send(lm->client, &cmd, 1);
+	if (unlikely(ret == -EREMOTEIO))
+		ret = i2c_master_send(lm->client, &cmd, 1);
+	if (unlikely(ret != 1)) {
+		dev_err(&lm->client->dev, "sending read cmd 0x%02x failed\n",
+			cmd);
+		return 0;
+	}
+
+	ret = i2c_master_recv(lm->client, buf, len);
+	if (unlikely(ret != len))
+		dev_err(&lm->client->dev, "wanted %d bytes, got %d\n",
+			len, ret);
+
+	return ret;
+}
+
+/*
+ * Set the chip active time (idle time before it enters halt).
+ */
+static void lm8323_set_active_time(struct lm8323_chip *lm, int time)
+{
+	lm8323_write(lm, 2, LM8323_CMD_SET_ACTIVE, time >> 2);
+}
+
+/*
+ * The signals are AT-style: the low 7 bits are the keycode, and the top
+ * bit indicates the state (1 for down, 0 for up).
+ */
+static inline u8 lm8323_whichkey(u8 event)
+{
+	return event & 0x7f;
+}
+
+static inline int lm8323_ispress(u8 event)
+{
+	return (event & 0x80) ? 1 : 0;
+}
+
+static void process_keys(struct lm8323_chip *lm)
+{
+	u8 event;
+	u8 key_fifo[LM8323_FIFO_LEN + 1];
+	int old_keys_down = lm->keys_down;
+	int ret;
+	int i = 0;
+
+	/*
+	 * Read all key events from the FIFO at once. Next READ_FIFO clears the
+	 * FIFO even if we didn't read all events previously.
+	 */
+	ret = lm8323_read(lm, LM8323_CMD_READ_FIFO, key_fifo, LM8323_FIFO_LEN);
+
+	if (ret < 0) {
+		dev_err(&lm->client->dev, "Failed reading fifo \n");
+		return;
+	}
+	key_fifo[ret] = 0;
+
+	while ((event = key_fifo[i++])) {
+		u8 key = lm8323_whichkey(event);
+		int isdown = lm8323_ispress(event);
+		unsigned short keycode = lm->keymap[key];
+
+		dev_vdbg(&lm->client->dev, "key 0x%02x %s\n",
+			 key, isdown ? "down" : "up");
+
+		if (lm->kp_enabled) {
+			input_event(lm->idev, EV_MSC, MSC_SCAN, key);
+			input_report_key(lm->idev, keycode, isdown);
+			input_sync(lm->idev);
+		}
+
+		if (isdown)
+			lm->keys_down++;
+		else
+			lm->keys_down--;
+	}
+
+	/*
+	 * Errata: We need to ensure that the chip never enters halt mode
+	 * during a keypress, so set active time to 0.  When it's released,
+	 * we can enter halt again, so set the active time back to normal.
+	 */
+	if (!old_keys_down && lm->keys_down)
+		lm8323_set_active_time(lm, 0);
+	if (old_keys_down && !lm->keys_down)
+		lm8323_set_active_time(lm, lm->active_time);
+}
+
+static void lm8323_process_error(struct lm8323_chip *lm)
+{
+	u8 error;
+
+	if (lm8323_read(lm, LM8323_CMD_READ_ERR, &error, 1) == 1) {
+		if (error & ERR_FIFOOVER)
+			dev_vdbg(&lm->client->dev, "fifo overflow!\n");
+		if (error & ERR_KEYOVR)
+			dev_vdbg(&lm->client->dev,
+					"more than two keys pressed\n");
+		if (error & ERR_CMDUNK)
+			dev_vdbg(&lm->client->dev,
+					"unknown command submitted\n");
+		if (error & ERR_BADPAR)
+			dev_vdbg(&lm->client->dev, "bad command parameter\n");
+	}
+}
+
+static void lm8323_reset(struct lm8323_chip *lm)
+{
+	/* The docs say we must pass 0xAA as the data byte. */
+	lm8323_write(lm, 2, LM8323_CMD_RESET, 0xAA);
+}
+
+static int lm8323_configure(struct lm8323_chip *lm)
+{
+	int keysize = (lm->size_x << 4) | lm->size_y;
+	int clock = (CLK_SLOWCLKEN | CLK_RCPWM_EXTERNAL);
+	int debounce = lm->debounce_time >> 2;
+	int active = lm->active_time >> 2;
+
+	/*
+	 * Active time must be greater than the debounce time: if it's
+	 * a close-run thing, give ourselves a 12ms buffer.
+	 */
+	if (debounce >= active)
+		active = debounce + 3;
+
+	lm8323_write(lm, 2, LM8323_CMD_WRITE_CFG, 0);
+	lm8323_write(lm, 2, LM8323_CMD_WRITE_CLOCK, clock);
+	lm8323_write(lm, 2, LM8323_CMD_SET_KEY_SIZE, keysize);
+	lm8323_set_active_time(lm, lm->active_time);
+	lm8323_write(lm, 2, LM8323_CMD_SET_DEBOUNCE, debounce);
+	lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_STATE, 0xff, 0xff);
+	lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_SEL, 0, 0);
+
+	/*
+	 * Not much we can do about errors at this point, so just hope
+	 * for the best.
+	 */
+
+	return 0;
+}
+
+static void pwm_done(struct lm8323_pwm *pwm)
+{
+	mutex_lock(&pwm->lock);
+	pwm->running = false;
+	if (pwm->desired_brightness != pwm->brightness)
+		schedule_work(&pwm->work);
+	mutex_unlock(&pwm->lock);
+}
+
+/*
+ * Bottom half: handle the interrupt by posting key events, or dealing with
+ * errors appropriately.
+ */
+static irqreturn_t lm8323_irq(int irq, void *_lm)
+{
+	struct lm8323_chip *lm = _lm;
+	u8 ints;
+	int i;
+
+	mutex_lock(&lm->lock);
+
+	while ((lm8323_read(lm, LM8323_CMD_READ_INT, &ints, 1) == 1) && ints) {
+		if (likely(ints & INT_KEYPAD))
+			process_keys(lm);
+		if (ints & INT_ROTATOR) {
+			/* We don't currently support the rotator. */
+			dev_vdbg(&lm->client->dev, "rotator fired\n");
+		}
+		if (ints & INT_ERROR) {
+			dev_vdbg(&lm->client->dev, "error!\n");
+			lm8323_process_error(lm);
+		}
+		if (ints & INT_NOINIT) {
+			dev_err(&lm->client->dev, "chip lost config; "
+						  "reinitialising\n");
+			lm8323_configure(lm);
+		}
+		for (i = 0; i < LM8323_NUM_PWMS; i++) {
+			if (ints & (INT_PWM1 << i)) {
+				dev_vdbg(&lm->client->dev,
+					 "pwm%d engine completed\n", i);
+				pwm_done(&lm->pwm[i]);
+			}
+		}
+	}
+
+	mutex_unlock(&lm->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Read the chip ID.
+ */
+static int lm8323_read_id(struct lm8323_chip *lm, u8 *buf)
+{
+	int bytes;
+
+	bytes = lm8323_read(lm, LM8323_CMD_READ_ID, buf, 2);
+	if (unlikely(bytes != 2))
+		return -EIO;
+
+	return 0;
+}
+
+static void lm8323_write_pwm_one(struct lm8323_pwm *pwm, int pos, u16 cmd)
+{
+	lm8323_write(pwm->chip, 4, LM8323_CMD_PWM_WRITE, (pos << 2) | pwm->id,
+		     (cmd & 0xff00) >> 8, cmd & 0x00ff);
+}
+
+/*
+ * Write a script into a given PWM engine, concluding with PWM_END.
+ * If 'kill' is nonzero, the engine will be shut down at the end
+ * of the script, producing a zero output. Otherwise the engine
+ * will be kept running at the final PWM level indefinitely.
+ */
+static void lm8323_write_pwm(struct lm8323_pwm *pwm, int kill,
+			     int len, const u16 *cmds)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		lm8323_write_pwm_one(pwm, i, cmds[i]);
+
+	lm8323_write_pwm_one(pwm, i++, PWM_END(kill));
+	lm8323_write(pwm->chip, 2, LM8323_CMD_START_PWM, pwm->id);
+	pwm->running = true;
+}
+
+static void lm8323_pwm_work(struct work_struct *work)
+{
+	struct lm8323_pwm *pwm = work_to_pwm(work);
+	int div512, perstep, steps, hz, up, kill;
+	u16 pwm_cmds[3];
+	int num_cmds = 0;
+
+	mutex_lock(&pwm->lock);
+
+	/*
+	 * Do nothing if we're already at the requested level,
+	 * or previous setting is not yet complete. In the latter
+	 * case we will be called again when the previous PWM script
+	 * finishes.
+	 */
+	if (pwm->running || pwm->desired_brightness == pwm->brightness)
+		goto out;
+
+	kill = (pwm->desired_brightness == 0);
+	up = (pwm->desired_brightness > pwm->brightness);
+	steps = abs(pwm->desired_brightness - pwm->brightness);
+
+	/*
+	 * Convert time (in ms) into a divisor (512 or 16 on a refclk of
+	 * 32768Hz), and number of ticks per step.
+	 */
+	if ((pwm->fade_time / steps) > (32768 / 512)) {
+		div512 = 1;
+		hz = 32768 / 512;
+	} else {
+		div512 = 0;
+		hz = 32768 / 16;
+	}
+
+	perstep = (hz * pwm->fade_time) / (steps * 1000);
+
+	if (perstep == 0)
+		perstep = 1;
+	else if (perstep > 63)
+		perstep = 63;
+
+	while (steps) {
+		int s;
+
+		s = min(126, steps);
+		pwm_cmds[num_cmds++] = PWM_RAMP(div512, perstep, s, up);
+		steps -= s;
+	}
+
+	lm8323_write_pwm(pwm, kill, num_cmds, pwm_cmds);
+	pwm->brightness = pwm->desired_brightness;
+
+ out:
+	mutex_unlock(&pwm->lock);
+}
+
+static void lm8323_pwm_set_brightness(struct led_classdev *led_cdev,
+				      enum led_brightness brightness)
+{
+	struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev);
+	struct lm8323_chip *lm = pwm->chip;
+
+	mutex_lock(&pwm->lock);
+	pwm->desired_brightness = brightness;
+	mutex_unlock(&pwm->lock);
+
+	if (in_interrupt()) {
+		schedule_work(&pwm->work);
+	} else {
+		/*
+		 * Schedule PWM work as usual unless we are going into suspend
+		 */
+		mutex_lock(&lm->lock);
+		if (likely(!lm->pm_suspend))
+			schedule_work(&pwm->work);
+		else
+			lm8323_pwm_work(&pwm->work);
+		mutex_unlock(&lm->lock);
+	}
+}
+
+static ssize_t lm8323_pwm_show_time(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev);
+
+	return sprintf(buf, "%d\n", pwm->fade_time);
+}
+
+static ssize_t lm8323_pwm_store_time(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev);
+	int ret, time;
+
+	ret = kstrtoint(buf, 10, &time);
+	/* Numbers only, please. */
+	if (ret)
+		return ret;
+
+	pwm->fade_time = time;
+
+	return strlen(buf);
+}
+static DEVICE_ATTR(time, 0644, lm8323_pwm_show_time, lm8323_pwm_store_time);
+
+static struct attribute *lm8323_pwm_attrs[] = {
+	&dev_attr_time.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(lm8323_pwm);
+
+static int init_pwm(struct lm8323_chip *lm, int id, struct device *dev,
+		    const char *name)
+{
+	struct lm8323_pwm *pwm;
+
+	BUG_ON(id > 3);
+
+	pwm = &lm->pwm[id - 1];
+
+	pwm->id = id;
+	pwm->fade_time = 0;
+	pwm->brightness = 0;
+	pwm->desired_brightness = 0;
+	pwm->running = false;
+	pwm->enabled = false;
+	INIT_WORK(&pwm->work, lm8323_pwm_work);
+	mutex_init(&pwm->lock);
+	pwm->chip = lm;
+
+	if (name) {
+		pwm->cdev.name = name;
+		pwm->cdev.brightness_set = lm8323_pwm_set_brightness;
+		pwm->cdev.groups = lm8323_pwm_groups;
+		if (led_classdev_register(dev, &pwm->cdev) < 0) {
+			dev_err(dev, "couldn't register PWM %d\n", id);
+			return -1;
+		}
+		pwm->enabled = true;
+	}
+
+	return 0;
+}
+
+static struct i2c_driver lm8323_i2c_driver;
+
+static ssize_t lm8323_show_disable(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct lm8323_chip *lm = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", !lm->kp_enabled);
+}
+
+static ssize_t lm8323_set_disable(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct lm8323_chip *lm = dev_get_drvdata(dev);
+	int ret;
+	unsigned int i;
+
+	ret = kstrtouint(buf, 10, &i);
+	if (ret)
+		return ret;
+
+	mutex_lock(&lm->lock);
+	lm->kp_enabled = !i;
+	mutex_unlock(&lm->lock);
+
+	return count;
+}
+static DEVICE_ATTR(disable_kp, 0644, lm8323_show_disable, lm8323_set_disable);
+
+static int lm8323_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct lm8323_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct input_dev *idev;
+	struct lm8323_chip *lm;
+	int pwm;
+	int i, err;
+	unsigned long tmo;
+	u8 data[2];
+
+	if (!pdata || !pdata->size_x || !pdata->size_y) {
+		dev_err(&client->dev, "missing platform_data\n");
+		return -EINVAL;
+	}
+
+	if (pdata->size_x > 8) {
+		dev_err(&client->dev, "invalid x size %d specified\n",
+			pdata->size_x);
+		return -EINVAL;
+	}
+
+	if (pdata->size_y > 12) {
+		dev_err(&client->dev, "invalid y size %d specified\n",
+			pdata->size_y);
+		return -EINVAL;
+	}
+
+	lm = kzalloc(sizeof *lm, GFP_KERNEL);
+	idev = input_allocate_device();
+	if (!lm || !idev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	lm->client = client;
+	lm->idev = idev;
+	mutex_init(&lm->lock);
+
+	lm->size_x = pdata->size_x;
+	lm->size_y = pdata->size_y;
+	dev_vdbg(&client->dev, "Keypad size: %d x %d\n",
+		 lm->size_x, lm->size_y);
+
+	lm->debounce_time = pdata->debounce_time;
+	lm->active_time = pdata->active_time;
+
+	lm8323_reset(lm);
+
+	/* Nothing's set up to service the IRQ yet, so just spin for max.
+	 * 100ms until we can configure. */
+	tmo = jiffies + msecs_to_jiffies(100);
+	while (lm8323_read(lm, LM8323_CMD_READ_INT, data, 1) == 1) {
+		if (data[0] & INT_NOINIT)
+			break;
+
+		if (time_after(jiffies, tmo)) {
+			dev_err(&client->dev,
+				"timeout waiting for initialisation\n");
+			break;
+		}
+
+		msleep(1);
+	}
+
+	lm8323_configure(lm);
+
+	/* If a true probe check the device */
+	if (lm8323_read_id(lm, data) != 0) {
+		dev_err(&client->dev, "device not found\n");
+		err = -ENODEV;
+		goto fail1;
+	}
+
+	for (pwm = 0; pwm < LM8323_NUM_PWMS; pwm++) {
+		err = init_pwm(lm, pwm + 1, &client->dev,
+			       pdata->pwm_names[pwm]);
+		if (err < 0)
+			goto fail2;
+	}
+
+	lm->kp_enabled = true;
+	err = device_create_file(&client->dev, &dev_attr_disable_kp);
+	if (err < 0)
+		goto fail2;
+
+	idev->name = pdata->name ? : "LM8323 keypad";
+	snprintf(lm->phys, sizeof(lm->phys),
+		 "%s/input-kp", dev_name(&client->dev));
+	idev->phys = lm->phys;
+
+	idev->evbit[0] = BIT(EV_KEY) | BIT(EV_MSC);
+	__set_bit(MSC_SCAN, idev->mscbit);
+	for (i = 0; i < LM8323_KEYMAP_SIZE; i++) {
+		__set_bit(pdata->keymap[i], idev->keybit);
+		lm->keymap[i] = pdata->keymap[i];
+	}
+	__clear_bit(KEY_RESERVED, idev->keybit);
+
+	if (pdata->repeat)
+		__set_bit(EV_REP, idev->evbit);
+
+	err = input_register_device(idev);
+	if (err) {
+		dev_dbg(&client->dev, "error registering input device\n");
+		goto fail3;
+	}
+
+	err = request_threaded_irq(client->irq, NULL, lm8323_irq,
+			  IRQF_TRIGGER_LOW|IRQF_ONESHOT, "lm8323", lm);
+	if (err) {
+		dev_err(&client->dev, "could not get IRQ %d\n", client->irq);
+		goto fail4;
+	}
+
+	i2c_set_clientdata(client, lm);
+
+	device_init_wakeup(&client->dev, 1);
+	enable_irq_wake(client->irq);
+
+	return 0;
+
+fail4:
+	input_unregister_device(idev);
+	idev = NULL;
+fail3:
+	device_remove_file(&client->dev, &dev_attr_disable_kp);
+fail2:
+	while (--pwm >= 0)
+		if (lm->pwm[pwm].enabled)
+			led_classdev_unregister(&lm->pwm[pwm].cdev);
+fail1:
+	input_free_device(idev);
+	kfree(lm);
+	return err;
+}
+
+static int lm8323_remove(struct i2c_client *client)
+{
+	struct lm8323_chip *lm = i2c_get_clientdata(client);
+	int i;
+
+	disable_irq_wake(client->irq);
+	free_irq(client->irq, lm);
+
+	input_unregister_device(lm->idev);
+
+	device_remove_file(&lm->client->dev, &dev_attr_disable_kp);
+
+	for (i = 0; i < 3; i++)
+		if (lm->pwm[i].enabled)
+			led_classdev_unregister(&lm->pwm[i].cdev);
+
+	kfree(lm);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * We don't need to explicitly suspend the chip, as it already switches off
+ * when there's no activity.
+ */
+static int lm8323_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm8323_chip *lm = i2c_get_clientdata(client);
+	int i;
+
+	irq_set_irq_wake(client->irq, 0);
+	disable_irq(client->irq);
+
+	mutex_lock(&lm->lock);
+	lm->pm_suspend = true;
+	mutex_unlock(&lm->lock);
+
+	for (i = 0; i < 3; i++)
+		if (lm->pwm[i].enabled)
+			led_classdev_suspend(&lm->pwm[i].cdev);
+
+	return 0;
+}
+
+static int lm8323_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm8323_chip *lm = i2c_get_clientdata(client);
+	int i;
+
+	mutex_lock(&lm->lock);
+	lm->pm_suspend = false;
+	mutex_unlock(&lm->lock);
+
+	for (i = 0; i < 3; i++)
+		if (lm->pwm[i].enabled)
+			led_classdev_resume(&lm->pwm[i].cdev);
+
+	enable_irq(client->irq);
+	irq_set_irq_wake(client->irq, 1);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(lm8323_pm_ops, lm8323_suspend, lm8323_resume);
+
+static const struct i2c_device_id lm8323_id[] = {
+	{ "lm8323", 0 },
+	{ }
+};
+
+static struct i2c_driver lm8323_i2c_driver = {
+	.driver = {
+		.name	= "lm8323",
+		.pm	= &lm8323_pm_ops,
+	},
+	.probe		= lm8323_probe,
+	.remove		= lm8323_remove,
+	.id_table	= lm8323_id,
+};
+MODULE_DEVICE_TABLE(i2c, lm8323_id);
+
+module_i2c_driver(lm8323_i2c_driver);
+
+MODULE_AUTHOR("Timo O. Karjalainen <timo.o.karjalainen@nokia.com>");
+MODULE_AUTHOR("Daniel Stone");
+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
+MODULE_DESCRIPTION("LM8323 keypad driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c
new file mode 100644
index 000000000..7c5f8c6bb
--- /dev/null
+++ b/drivers/input/keyboard/lm8333.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LM8333 keypad driver
+ * Copyright (C) 2012 Wolfram Sang, Pengutronix <kernel@pengutronix.de>
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/input/lm8333.h>
+
+#define LM8333_FIFO_READ		0x20
+#define LM8333_DEBOUNCE			0x22
+#define LM8333_READ_INT			0xD0
+#define LM8333_ACTIVE			0xE4
+#define LM8333_READ_ERROR		0xF0
+
+#define LM8333_KEYPAD_IRQ		(1 << 0)
+#define LM8333_ERROR_IRQ		(1 << 3)
+
+#define LM8333_ERROR_KEYOVR		0x04
+#define LM8333_ERROR_FIFOOVR		0x40
+
+#define LM8333_FIFO_TRANSFER_SIZE	16
+
+#define LM8333_NUM_ROWS		8
+#define LM8333_NUM_COLS		16
+#define LM8333_ROW_SHIFT	4
+
+struct lm8333 {
+	struct i2c_client *client;
+	struct input_dev *input;
+	unsigned short keycodes[LM8333_NUM_ROWS << LM8333_ROW_SHIFT];
+};
+
+/* The accessors try twice because the first access may be needed for wakeup */
+#define LM8333_READ_RETRIES 2
+
+int lm8333_read8(struct lm8333 *lm8333, u8 cmd)
+{
+	int retries = 0, ret;
+
+	do {
+		ret = i2c_smbus_read_byte_data(lm8333->client, cmd);
+	} while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+	return ret;
+}
+
+int lm8333_write8(struct lm8333 *lm8333, u8 cmd, u8 val)
+{
+	int retries = 0, ret;
+
+	do {
+		ret = i2c_smbus_write_byte_data(lm8333->client, cmd, val);
+	} while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+	return ret;
+}
+
+int lm8333_read_block(struct lm8333 *lm8333, u8 cmd, u8 len, u8 *buf)
+{
+	int retries = 0, ret;
+
+	do {
+		ret = i2c_smbus_read_i2c_block_data(lm8333->client,
+						    cmd, len, buf);
+	} while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+	return ret;
+}
+
+static void lm8333_key_handler(struct lm8333 *lm8333)
+{
+	struct input_dev *input = lm8333->input;
+	u8 keys[LM8333_FIFO_TRANSFER_SIZE];
+	u8 code, pressed;
+	int i, ret;
+
+	ret = lm8333_read_block(lm8333, LM8333_FIFO_READ,
+				LM8333_FIFO_TRANSFER_SIZE, keys);
+	if (ret != LM8333_FIFO_TRANSFER_SIZE) {
+		dev_err(&lm8333->client->dev,
+			"Error %d while reading FIFO\n", ret);
+		return;
+	}
+
+	for (i = 0; i < LM8333_FIFO_TRANSFER_SIZE && keys[i]; i++) {
+		pressed = keys[i] & 0x80;
+		code = keys[i] & 0x7f;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, lm8333->keycodes[code], pressed);
+	}
+
+	input_sync(input);
+}
+
+static irqreturn_t lm8333_irq_thread(int irq, void *data)
+{
+	struct lm8333 *lm8333 = data;
+	u8 status = lm8333_read8(lm8333, LM8333_READ_INT);
+
+	if (!status)
+		return IRQ_NONE;
+
+	if (status & LM8333_ERROR_IRQ) {
+		u8 err = lm8333_read8(lm8333, LM8333_READ_ERROR);
+
+		if (err & (LM8333_ERROR_KEYOVR | LM8333_ERROR_FIFOOVR)) {
+			u8 dummy[LM8333_FIFO_TRANSFER_SIZE];
+
+			lm8333_read_block(lm8333, LM8333_FIFO_READ,
+					LM8333_FIFO_TRANSFER_SIZE, dummy);
+		}
+		dev_err(&lm8333->client->dev, "Got error %02x\n", err);
+	}
+
+	if (status & LM8333_KEYPAD_IRQ)
+		lm8333_key_handler(lm8333);
+
+	return IRQ_HANDLED;
+}
+
+static int lm8333_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	const struct lm8333_platform_data *pdata =
+			dev_get_platdata(&client->dev);
+	struct lm8333 *lm8333;
+	struct input_dev *input;
+	int err, active_time;
+
+	if (!pdata)
+		return -EINVAL;
+
+	active_time = pdata->active_time ?: 500;
+	if (active_time / 3 <= pdata->debounce_time / 3) {
+		dev_err(&client->dev, "Active time not big enough!\n");
+		return -EINVAL;
+	}
+
+	lm8333 = kzalloc(sizeof(*lm8333), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!lm8333 || !input) {
+		err = -ENOMEM;
+		goto free_mem;
+	}
+
+	lm8333->client = client;
+	lm8333->input = input;
+
+	input->name = client->name;
+	input->dev.parent = &client->dev;
+	input->id.bustype = BUS_I2C;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	err = matrix_keypad_build_keymap(pdata->matrix_data, NULL,
+					 LM8333_NUM_ROWS, LM8333_NUM_COLS,
+					 lm8333->keycodes, input);
+	if (err)
+		goto free_mem;
+
+	if (pdata->debounce_time) {
+		err = lm8333_write8(lm8333, LM8333_DEBOUNCE,
+				    pdata->debounce_time / 3);
+		if (err)
+			dev_warn(&client->dev, "Unable to set debounce time\n");
+	}
+
+	if (pdata->active_time) {
+		err = lm8333_write8(lm8333, LM8333_ACTIVE,
+				    pdata->active_time / 3);
+		if (err)
+			dev_warn(&client->dev, "Unable to set active time\n");
+	}
+
+	err = request_threaded_irq(client->irq, NULL, lm8333_irq_thread,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   "lm8333", lm8333);
+	if (err)
+		goto free_mem;
+
+	err = input_register_device(input);
+	if (err)
+		goto free_irq;
+
+	i2c_set_clientdata(client, lm8333);
+	return 0;
+
+ free_irq:
+	free_irq(client->irq, lm8333);
+ free_mem:
+	input_free_device(input);
+	kfree(lm8333);
+	return err;
+}
+
+static int lm8333_remove(struct i2c_client *client)
+{
+	struct lm8333 *lm8333 = i2c_get_clientdata(client);
+
+	free_irq(client->irq, lm8333);
+	input_unregister_device(lm8333->input);
+	kfree(lm8333);
+
+	return 0;
+}
+
+static const struct i2c_device_id lm8333_id[] = {
+	{ "lm8333", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm8333_id);
+
+static struct i2c_driver lm8333_driver = {
+	.driver = {
+		.name		= "lm8333",
+	},
+	.probe		= lm8333_probe,
+	.remove		= lm8333_remove,
+	.id_table	= lm8333_id,
+};
+module_i2c_driver(lm8333_driver);
+
+MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("LM8333 keyboard driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
new file mode 100644
index 000000000..daf6a753c
--- /dev/null
+++ b/drivers/input/keyboard/locomokbd.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * LoCoMo keyboard driver for Linux-based ARM PDAs:
+ * 	- SHARP Zaurus Collie (SL-5500)
+ * 	- SHARP Zaurus Poodle (SL-5600)
+ *
+ * Copyright (c) 2005 John Lenz
+ * Based on from xtkbd.c
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware/locomo.h>
+#include <asm/irq.h>
+
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
+MODULE_DESCRIPTION("LoCoMo keyboard driver");
+MODULE_LICENSE("GPL");
+
+#define LOCOMOKBD_NUMKEYS	128
+
+#define KEY_ACTIVITY		KEY_F16
+#define KEY_CONTACT		KEY_F18
+#define KEY_CENTER		KEY_F15
+
+static const unsigned char
+locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
+	0, KEY_ESC, KEY_ACTIVITY, 0, 0, 0, 0, 0, 0, 0,				/* 0 - 9 */
+	0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_HOME, KEY_CONTACT,			/* 10 - 19 */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0,						/* 20 - 29 */
+	0, 0, 0, KEY_CENTER, 0, KEY_MAIL, 0, 0, 0, 0,				/* 30 - 39 */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT,					/* 40 - 49 */
+	KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T,		/* 50 - 59 */
+	KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, KEY_ENTER, 0, 0,			/* 60 - 69 */
+	KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0,	/* 70 - 79 */
+	0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J,		/* 80 - 89 */
+	KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0,				/* 90 - 99 */
+	0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A,		/* 100 - 109 */
+	KEY_LEFTSHIFT, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0, 0, 0,		/* 110 - 119 */
+	KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0		/* 120 - 128 */
+};
+
+#define KB_ROWS			16
+#define KB_COLS			8
+#define KB_ROWMASK(r)		(1 << (r))
+#define SCANCODE(c,r)		( ((c)<<4) + (r) + 1 )
+
+#define KB_DELAY		8
+#define SCAN_INTERVAL		(HZ/10)
+
+struct locomokbd {
+	unsigned char keycode[LOCOMOKBD_NUMKEYS];
+	struct input_dev *input;
+	char phys[32];
+
+	unsigned long base;
+	spinlock_t lock;
+
+	struct timer_list timer;
+	unsigned long suspend_jiffies;
+	unsigned int count_cancel;
+};
+
+/* helper functions for reading the keyboard matrix */
+static inline void locomokbd_charge_all(unsigned long membase)
+{
+	locomo_writel(0x00FF, membase + LOCOMO_KSC);
+}
+
+static inline void locomokbd_activate_all(unsigned long membase)
+{
+	unsigned long r;
+
+	locomo_writel(0, membase + LOCOMO_KSC);
+	r = locomo_readl(membase + LOCOMO_KIC);
+	r &= 0xFEFF;
+	locomo_writel(r, membase + LOCOMO_KIC);
+}
+
+static inline void locomokbd_activate_col(unsigned long membase, int col)
+{
+	unsigned short nset;
+	unsigned short nbset;
+
+	nset = 0xFF & ~(1 << col);
+	nbset = (nset << 8) + nset;
+	locomo_writel(nbset, membase + LOCOMO_KSC);
+}
+
+static inline void locomokbd_reset_col(unsigned long membase, int col)
+{
+	unsigned short nbset;
+
+	nbset = ((0xFF & ~(1 << col)) << 8) + 0xFF;
+	locomo_writel(nbset, membase + LOCOMO_KSC);
+}
+
+/*
+ * The LoCoMo keyboard only generates interrupts when a key is pressed.
+ * So when a key is pressed, we enable a timer.  This timer scans the
+ * keyboard, and this is how we detect when the key is released.
+ */
+
+/* Scan the hardware keyboard and push any changes up through the input layer */
+static void locomokbd_scankeyboard(struct locomokbd *locomokbd)
+{
+	unsigned int row, col, rowd;
+	unsigned long flags;
+	unsigned int num_pressed;
+	unsigned long membase = locomokbd->base;
+
+	spin_lock_irqsave(&locomokbd->lock, flags);
+
+	locomokbd_charge_all(membase);
+
+	num_pressed = 0;
+	for (col = 0; col < KB_COLS; col++) {
+
+		locomokbd_activate_col(membase, col);
+		udelay(KB_DELAY);
+
+		rowd = ~locomo_readl(membase + LOCOMO_KIB);
+		for (row = 0; row < KB_ROWS; row++) {
+			unsigned int scancode, pressed, key;
+
+			scancode = SCANCODE(col, row);
+			pressed = rowd & KB_ROWMASK(row);
+			key = locomokbd->keycode[scancode];
+
+			input_report_key(locomokbd->input, key, pressed);
+			if (likely(!pressed))
+				continue;
+
+			num_pressed++;
+
+			/* The "Cancel/ESC" key is labeled "On/Off" on
+			 * Collie and Poodle and should suspend the device
+			 * if it was pressed for more than a second. */
+			if (unlikely(key == KEY_ESC)) {
+				if (!time_after(jiffies,
+					locomokbd->suspend_jiffies + HZ))
+					continue;
+				if (locomokbd->count_cancel++
+					!= (HZ/SCAN_INTERVAL + 1))
+					continue;
+				input_event(locomokbd->input, EV_PWR,
+					KEY_SUSPEND, 1);
+				locomokbd->suspend_jiffies = jiffies;
+			} else
+				locomokbd->count_cancel = 0;
+		}
+		locomokbd_reset_col(membase, col);
+	}
+	locomokbd_activate_all(membase);
+
+	input_sync(locomokbd->input);
+
+	/* if any keys are pressed, enable the timer */
+	if (num_pressed)
+		mod_timer(&locomokbd->timer, jiffies + SCAN_INTERVAL);
+	else
+		locomokbd->count_cancel = 0;
+
+	spin_unlock_irqrestore(&locomokbd->lock, flags);
+}
+
+/*
+ * LoCoMo keyboard interrupt handler.
+ */
+static irqreturn_t locomokbd_interrupt(int irq, void *dev_id)
+{
+	struct locomokbd *locomokbd = dev_id;
+	u16 r;
+
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC);
+	if ((r & 0x0001) == 0)
+		return IRQ_HANDLED;
+
+	locomo_writel(r & ~0x0100, locomokbd->base + LOCOMO_KIC); /* Ack */
+
+	/** wait chattering delay **/
+	udelay(100);
+
+	locomokbd_scankeyboard(locomokbd);
+	return IRQ_HANDLED;
+}
+
+/*
+ * LoCoMo timer checking for released keys
+ */
+static void locomokbd_timer_callback(struct timer_list *t)
+{
+	struct locomokbd *locomokbd = from_timer(locomokbd, t, timer);
+
+	locomokbd_scankeyboard(locomokbd);
+}
+
+static int locomokbd_open(struct input_dev *dev)
+{
+	struct locomokbd *locomokbd = input_get_drvdata(dev);
+	u16 r;
+	
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC) | 0x0010;
+	locomo_writel(r, locomokbd->base + LOCOMO_KIC);
+	return 0;
+}
+
+static void locomokbd_close(struct input_dev *dev)
+{
+	struct locomokbd *locomokbd = input_get_drvdata(dev);
+	u16 r;
+	
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC) & ~0x0010;
+	locomo_writel(r, locomokbd->base + LOCOMO_KIC);
+}
+
+static int locomokbd_probe(struct locomo_dev *dev)
+{
+	struct locomokbd *locomokbd;
+	struct input_dev *input_dev;
+	int i, err;
+
+	locomokbd = kzalloc(sizeof(struct locomokbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!locomokbd || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	/* try and claim memory region */
+	if (!request_mem_region((unsigned long) dev->mapbase,
+				dev->length,
+				LOCOMO_DRIVER_NAME(dev))) {
+		err = -EBUSY;
+		printk(KERN_ERR "locomokbd: Can't acquire access to io memory for keyboard\n");
+		goto err_free_mem;
+	}
+
+	locomo_set_drvdata(dev, locomokbd);
+
+	locomokbd->base = (unsigned long) dev->mapbase;
+
+	spin_lock_init(&locomokbd->lock);
+
+	timer_setup(&locomokbd->timer, locomokbd_timer_callback, 0);
+
+	locomokbd->suspend_jiffies = jiffies;
+
+	locomokbd->input = input_dev;
+	strcpy(locomokbd->phys, "locomokbd/input0");
+
+	input_dev->name = "LoCoMo keyboard";
+	input_dev->phys = locomokbd->phys;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->open = locomokbd_open;
+	input_dev->close = locomokbd_close;
+	input_dev->dev.parent = &dev->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
+				BIT_MASK(EV_PWR);
+	input_dev->keycode = locomokbd->keycode;
+	input_dev->keycodesize = sizeof(locomokbd_keycode[0]);
+	input_dev->keycodemax = ARRAY_SIZE(locomokbd_keycode);
+
+	input_set_drvdata(input_dev, locomokbd);
+
+	memcpy(locomokbd->keycode, locomokbd_keycode, sizeof(locomokbd->keycode));
+	for (i = 0; i < LOCOMOKBD_NUMKEYS; i++)
+		set_bit(locomokbd->keycode[i], input_dev->keybit);
+	clear_bit(0, input_dev->keybit);
+
+	/* attempt to get the interrupt */
+	err = request_irq(dev->irq[0], locomokbd_interrupt, 0, "locomokbd", locomokbd);
+	if (err) {
+		printk(KERN_ERR "locomokbd: Can't get irq for keyboard\n");
+		goto err_release_region;
+	}
+
+	err = input_register_device(locomokbd->input);
+	if (err)
+		goto err_free_irq;
+
+	return 0;
+
+ err_free_irq:
+	free_irq(dev->irq[0], locomokbd);
+ err_release_region:
+	release_mem_region((unsigned long) dev->mapbase, dev->length);
+	locomo_set_drvdata(dev, NULL);
+ err_free_mem:
+	input_free_device(input_dev);
+	kfree(locomokbd);
+
+	return err;
+}
+
+static int locomokbd_remove(struct locomo_dev *dev)
+{
+	struct locomokbd *locomokbd = locomo_get_drvdata(dev);
+
+	free_irq(dev->irq[0], locomokbd);
+
+	del_timer_sync(&locomokbd->timer);
+
+	input_unregister_device(locomokbd->input);
+	locomo_set_drvdata(dev, NULL);
+
+	release_mem_region((unsigned long) dev->mapbase, dev->length);
+
+	kfree(locomokbd);
+
+	return 0;
+}
+
+static struct locomo_driver keyboard_driver = {
+	.drv = {
+		.name = "locomokbd"
+	},
+	.devid	= LOCOMO_DEVID_KEYBOARD,
+	.probe	= locomokbd_probe,
+	.remove	= locomokbd_remove,
+};
+
+static int __init locomokbd_init(void)
+{
+	return locomo_driver_register(&keyboard_driver);
+}
+
+static void __exit locomokbd_exit(void)
+{
+	locomo_driver_unregister(&keyboard_driver);
+}
+
+module_init(locomokbd_init);
+module_exit(locomokbd_exit);
diff --git a/drivers/input/keyboard/lpc32xx-keys.c b/drivers/input/keyboard/lpc32xx-keys.c
new file mode 100644
index 000000000..348af2aeb
--- /dev/null
+++ b/drivers/input/keyboard/lpc32xx-keys.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * NXP LPC32xx SoC Key Scan Interface
+ *
+ * Authors:
+ *    Kevin Wells <kevin.wells@nxp.com>
+ *    Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * This controller supports square key matrices from 1x1 up to 8x8
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/input/matrix_keypad.h>
+
+#define DRV_NAME				"lpc32xx_keys"
+
+/*
+ * Key scanner register offsets
+ */
+#define LPC32XX_KS_DEB(x)			((x) + 0x00)
+#define LPC32XX_KS_STATE_COND(x)		((x) + 0x04)
+#define LPC32XX_KS_IRQ(x)			((x) + 0x08)
+#define LPC32XX_KS_SCAN_CTL(x)			((x) + 0x0C)
+#define LPC32XX_KS_FAST_TST(x)			((x) + 0x10)
+#define LPC32XX_KS_MATRIX_DIM(x)		((x) + 0x14) /* 1..8 */
+#define LPC32XX_KS_DATA(x, y)			((x) + 0x40 + ((y) << 2))
+
+#define LPC32XX_KSCAN_DEB_NUM_DEB_PASS(n)	((n) & 0xFF)
+
+#define LPC32XX_KSCAN_SCOND_IN_IDLE		0x0
+#define LPC32XX_KSCAN_SCOND_IN_SCANONCE		0x1
+#define LPC32XX_KSCAN_SCOND_IN_IRQGEN		0x2
+#define LPC32XX_KSCAN_SCOND_IN_SCAN_MATRIX	0x3
+
+#define LPC32XX_KSCAN_IRQ_PENDING_CLR		0x1
+
+#define LPC32XX_KSCAN_SCTRL_SCAN_DELAY(n)	((n) & 0xFF)
+
+#define LPC32XX_KSCAN_FTST_FORCESCANONCE	0x1
+#define LPC32XX_KSCAN_FTST_USE32K_CLK		0x2
+
+#define LPC32XX_KSCAN_MSEL_SELECT(n)		((n) & 0xF)
+
+struct lpc32xx_kscan_drv {
+	struct input_dev *input;
+	struct clk *clk;
+	void __iomem *kscan_base;
+	unsigned int irq;
+
+	u32 matrix_sz;		/* Size of matrix in XxY, ie. 3 = 3x3 */
+	u32 deb_clks;		/* Debounce clocks (based on 32KHz clock) */
+	u32 scan_delay;		/* Scan delay (based on 32KHz clock) */
+
+	unsigned short *keymap;	/* Pointer to key map for the scan matrix */
+	unsigned int row_shift;
+
+	u8 lastkeystates[8];
+};
+
+static void lpc32xx_mod_states(struct lpc32xx_kscan_drv *kscandat, int col)
+{
+	struct input_dev *input = kscandat->input;
+	unsigned row, changed, scancode, keycode;
+	u8 key;
+
+	key = readl(LPC32XX_KS_DATA(kscandat->kscan_base, col));
+	changed = key ^ kscandat->lastkeystates[col];
+	kscandat->lastkeystates[col] = key;
+
+	for (row = 0; changed; row++, changed >>= 1) {
+		if (changed & 1) {
+			/* Key state changed, signal an event */
+			scancode = MATRIX_SCAN_CODE(row, col,
+						    kscandat->row_shift);
+			keycode = kscandat->keymap[scancode];
+			input_event(input, EV_MSC, MSC_SCAN, scancode);
+			input_report_key(input, keycode, key & (1 << row));
+		}
+	}
+}
+
+static irqreturn_t lpc32xx_kscan_irq(int irq, void *dev_id)
+{
+	struct lpc32xx_kscan_drv *kscandat = dev_id;
+	int i;
+
+	for (i = 0; i < kscandat->matrix_sz; i++)
+		lpc32xx_mod_states(kscandat, i);
+
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+
+	input_sync(kscandat->input);
+
+	return IRQ_HANDLED;
+}
+
+static int lpc32xx_kscan_open(struct input_dev *dev)
+{
+	struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev);
+	int error;
+
+	error = clk_prepare_enable(kscandat->clk);
+	if (error)
+		return error;
+
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+
+	return 0;
+}
+
+static void lpc32xx_kscan_close(struct input_dev *dev)
+{
+	struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev);
+
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+	clk_disable_unprepare(kscandat->clk);
+}
+
+static int lpc32xx_parse_dt(struct device *dev,
+				      struct lpc32xx_kscan_drv *kscandat)
+{
+	struct device_node *np = dev->of_node;
+	u32 rows = 0, columns = 0;
+	int err;
+
+	err = matrix_keypad_parse_properties(dev, &rows, &columns);
+	if (err)
+		return err;
+	if (rows != columns) {
+		dev_err(dev, "rows and columns must be equal!\n");
+		return -EINVAL;
+	}
+
+	kscandat->matrix_sz = rows;
+	kscandat->row_shift = get_count_order(columns);
+
+	of_property_read_u32(np, "nxp,debounce-delay-ms", &kscandat->deb_clks);
+	of_property_read_u32(np, "nxp,scan-delay-ms", &kscandat->scan_delay);
+	if (!kscandat->deb_clks || !kscandat->scan_delay) {
+		dev_err(dev, "debounce or scan delay not specified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int lpc32xx_kscan_probe(struct platform_device *pdev)
+{
+	struct lpc32xx_kscan_drv *kscandat;
+	struct input_dev *input;
+	struct resource *res;
+	size_t keymap_size;
+	int error;
+	int irq;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get platform I/O memory\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -EINVAL;
+
+	kscandat = devm_kzalloc(&pdev->dev, sizeof(*kscandat),
+				GFP_KERNEL);
+	if (!kscandat)
+		return -ENOMEM;
+
+	error = lpc32xx_parse_dt(&pdev->dev, kscandat);
+	if (error) {
+		dev_err(&pdev->dev, "failed to parse device tree\n");
+		return error;
+	}
+
+	keymap_size = sizeof(kscandat->keymap[0]) *
+				(kscandat->matrix_sz << kscandat->row_shift);
+	kscandat->keymap = devm_kzalloc(&pdev->dev, keymap_size, GFP_KERNEL);
+	if (!kscandat->keymap)
+		return -ENOMEM;
+
+	kscandat->input = input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	/* Setup key input */
+	input->name		= pdev->name;
+	input->phys		= "lpc32xx/input0";
+	input->id.vendor	= 0x0001;
+	input->id.product	= 0x0001;
+	input->id.version	= 0x0100;
+	input->open		= lpc32xx_kscan_open;
+	input->close		= lpc32xx_kscan_close;
+	input->dev.parent	= &pdev->dev;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   kscandat->matrix_sz,
+					   kscandat->matrix_sz,
+					   kscandat->keymap, kscandat->input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		return error;
+	}
+
+	input_set_drvdata(kscandat->input, kscandat);
+
+	kscandat->kscan_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kscandat->kscan_base))
+		return PTR_ERR(kscandat->kscan_base);
+
+	/* Get the key scanner clock */
+	kscandat->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kscandat->clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return PTR_ERR(kscandat->clk);
+	}
+
+	/* Configure the key scanner */
+	error = clk_prepare_enable(kscandat->clk);
+	if (error)
+		return error;
+
+	writel(kscandat->deb_clks, LPC32XX_KS_DEB(kscandat->kscan_base));
+	writel(kscandat->scan_delay, LPC32XX_KS_SCAN_CTL(kscandat->kscan_base));
+	writel(LPC32XX_KSCAN_FTST_USE32K_CLK,
+	       LPC32XX_KS_FAST_TST(kscandat->kscan_base));
+	writel(kscandat->matrix_sz,
+	       LPC32XX_KS_MATRIX_DIM(kscandat->kscan_base));
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+	clk_disable_unprepare(kscandat->clk);
+
+	error = devm_request_irq(&pdev->dev, irq, lpc32xx_kscan_irq, 0,
+				 pdev->name, kscandat);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		return error;
+	}
+
+	error = input_register_device(kscandat->input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, kscandat);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lpc32xx_kscan_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+	struct input_dev *input = kscandat->input;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		/* Clear IRQ and disable clock */
+		writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+		clk_disable_unprepare(kscandat->clk);
+	}
+
+	mutex_unlock(&input->mutex);
+	return 0;
+}
+
+static int lpc32xx_kscan_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+	struct input_dev *input = kscandat->input;
+	int retval = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		/* Enable clock and clear IRQ */
+		retval = clk_prepare_enable(kscandat->clk);
+		if (retval == 0)
+			writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+	}
+
+	mutex_unlock(&input->mutex);
+	return retval;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(lpc32xx_kscan_pm_ops, lpc32xx_kscan_suspend,
+			 lpc32xx_kscan_resume);
+
+static const struct of_device_id lpc32xx_kscan_match[] = {
+	{ .compatible = "nxp,lpc3220-key" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_kscan_match);
+
+static struct platform_driver lpc32xx_kscan_driver = {
+	.probe		= lpc32xx_kscan_probe,
+	.driver		= {
+		.name	= DRV_NAME,
+		.pm	= &lpc32xx_kscan_pm_ops,
+		.of_match_table = lpc32xx_kscan_match,
+	}
+};
+
+module_platform_driver(lpc32xx_kscan_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("Key scanner driver for LPC32XX devices");
diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c
new file mode 100644
index 000000000..d08b565be
--- /dev/null
+++ b/drivers/input/keyboard/maple_keyb.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SEGA Dreamcast keyboard driver
+ * Based on drivers/usb/usbkbd.c
+ * Copyright (c) YAEGASHI Takeshi, 2001
+ * Porting to 2.6 Copyright (c) Adrian McMenamin, 2007 - 2009
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/maple.h>
+
+/* Very simple mutex to ensure proper cleanup */
+static DEFINE_MUTEX(maple_keyb_mutex);
+
+#define NR_SCANCODES 256
+
+MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk");
+MODULE_DESCRIPTION("SEGA Dreamcast keyboard driver");
+MODULE_LICENSE("GPL");
+
+struct dc_kbd {
+	struct input_dev *dev;
+	unsigned short keycode[NR_SCANCODES];
+	unsigned char new[8];
+	unsigned char old[8];
+};
+
+static const unsigned short dc_kbd_keycode[NR_SCANCODES] = {
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, KEY_B,
+	KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
+	KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
+	KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
+	KEY_7, KEY_8, KEY_9, KEY_0, KEY_ENTER, KEY_ESC, KEY_BACKSPACE,
+	KEY_TAB, KEY_SPACE, KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE,
+	KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_BACKSLASH, KEY_SEMICOLON,
+	KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, KEY_DOT, KEY_SLASH,
+	KEY_CAPSLOCK, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6,
+	KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, KEY_SYSRQ,
+	KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, KEY_PAGEUP,
+	KEY_DELETE, KEY_END, KEY_PAGEDOWN, KEY_RIGHT, KEY_LEFT, KEY_DOWN,
+	KEY_UP, KEY_NUMLOCK, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS,
+	KEY_KPPLUS, KEY_KPENTER, KEY_KP1, KEY_KP2, KEY_KP3, KEY_KP4, KEY_KP5,
+	KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, KEY_102ND,
+	KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, KEY_F14, KEY_F15,
+	KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22,
+	KEY_F23, KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, KEY_STOP,
+	KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, KEY_PASTE, KEY_FIND, KEY_MUTE,
+	KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_KPCOMMA, KEY_RESERVED, KEY_RO, KEY_KATAKANAHIRAGANA , KEY_YEN,
+	KEY_HENKAN, KEY_MUHENKAN, KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_HANGEUL, KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA,
+	KEY_ZENKAKUHANKAKU, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
+	KEY_RESERVED, KEY_RESERVED, KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT,
+	KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, KEY_RIGHTALT,
+	KEY_RIGHTMETA, KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG,
+	KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE,
+	KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, KEY_SCROLLUP,
+	KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, KEY_SCREENLOCK, KEY_REFRESH,
+	KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED
+};
+
+static void dc_scan_kbd(struct dc_kbd *kbd)
+{
+	struct input_dev *dev = kbd->dev;
+	void *ptr;
+	int code, keycode;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		code = i + 224;
+		keycode = kbd->keycode[code];
+		input_event(dev, EV_MSC, MSC_SCAN, code);
+		input_report_key(dev, keycode, (kbd->new[0] >> i) & 1);
+	}
+
+	for (i = 2; i < 8; i++) {
+		ptr = memchr(kbd->new + 2, kbd->old[i], 6);
+		code = kbd->old[i];
+		if (code > 3 && ptr == NULL) {
+			keycode = kbd->keycode[code];
+			if (keycode) {
+				input_event(dev, EV_MSC, MSC_SCAN, code);
+				input_report_key(dev, keycode, 0);
+			} else
+				dev_dbg(&dev->dev,
+					"Unknown key (scancode %#x) released.",
+					code);
+		}
+		ptr = memchr(kbd->old + 2, kbd->new[i], 6);
+		code = kbd->new[i];
+		if (code > 3 && ptr) {
+			keycode = kbd->keycode[code];
+			if (keycode) {
+				input_event(dev, EV_MSC, MSC_SCAN, code);
+				input_report_key(dev, keycode, 1);
+			} else
+				dev_dbg(&dev->dev,
+					"Unknown key (scancode %#x) pressed.",
+					code);
+		}
+	}
+	input_sync(dev);
+	memcpy(kbd->old, kbd->new, 8);
+}
+
+static void dc_kbd_callback(struct mapleq *mq)
+{
+	struct maple_device *mapledev = mq->dev;
+	struct dc_kbd *kbd = maple_get_drvdata(mapledev);
+	unsigned long *buf = (unsigned long *)(mq->recvbuf->buf);
+
+	/*
+	 * We should always get the lock because the only
+	 * time it may be locked is if the driver is in the cleanup phase.
+	 */
+	if (likely(mutex_trylock(&maple_keyb_mutex))) {
+
+		if (buf[1] == mapledev->function) {
+			memcpy(kbd->new, buf + 2, 8);
+			dc_scan_kbd(kbd);
+		}
+
+		mutex_unlock(&maple_keyb_mutex);
+	}
+}
+
+static int probe_maple_kbd(struct device *dev)
+{
+	struct maple_device *mdev;
+	struct maple_driver *mdrv;
+	int i, error;
+	struct dc_kbd *kbd;
+	struct input_dev *idev;
+
+	mdev = to_maple_dev(dev);
+	mdrv = to_maple_driver(dev->driver);
+
+	kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL);
+	if (!kbd) {
+		error = -ENOMEM;
+		goto fail;
+	}
+
+	idev = input_allocate_device();
+	if (!idev) {
+		error = -ENOMEM;
+		goto fail_idev_alloc;
+	}
+
+	kbd->dev = idev;
+	memcpy(kbd->keycode, dc_kbd_keycode, sizeof(kbd->keycode));
+
+	idev->name = mdev->product_name;
+	idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+	idev->keycode = kbd->keycode;
+	idev->keycodesize = sizeof(unsigned short);
+	idev->keycodemax = ARRAY_SIZE(kbd->keycode);
+	idev->id.bustype = BUS_HOST;
+	idev->dev.parent = &mdev->dev;
+
+	for (i = 0; i < NR_SCANCODES; i++)
+		__set_bit(dc_kbd_keycode[i], idev->keybit);
+	__clear_bit(KEY_RESERVED, idev->keybit);
+
+	input_set_capability(idev, EV_MSC, MSC_SCAN);
+
+	error = input_register_device(idev);
+	if (error)
+		goto fail_register;
+
+	/* Maple polling is locked to VBLANK - which may be just 50/s */
+	maple_getcond_callback(mdev, dc_kbd_callback, HZ/50,
+		MAPLE_FUNC_KEYBOARD);
+
+	mdev->driver = mdrv;
+
+	maple_set_drvdata(mdev, kbd);
+
+	return error;
+
+fail_register:
+	maple_set_drvdata(mdev, NULL);
+	input_free_device(idev);
+fail_idev_alloc:
+	kfree(kbd);
+fail:
+	return error;
+}
+
+static int remove_maple_kbd(struct device *dev)
+{
+	struct maple_device *mdev = to_maple_dev(dev);
+	struct dc_kbd *kbd = maple_get_drvdata(mdev);
+
+	mutex_lock(&maple_keyb_mutex);
+
+	input_unregister_device(kbd->dev);
+	kfree(kbd);
+
+	maple_set_drvdata(mdev, NULL);
+
+	mutex_unlock(&maple_keyb_mutex);
+	return 0;
+}
+
+static struct maple_driver dc_kbd_driver = {
+	.function = MAPLE_FUNC_KEYBOARD,
+	.drv = {
+		.name = "Dreamcast_keyboard",
+		.probe = probe_maple_kbd,
+		.remove = remove_maple_kbd,
+	},
+};
+
+static int __init dc_kbd_init(void)
+{
+	return maple_driver_register(&dc_kbd_driver);
+}
+
+static void __exit dc_kbd_exit(void)
+{
+	maple_driver_unregister(&dc_kbd_driver);
+}
+
+module_init(dc_kbd_init);
+module_exit(dc_kbd_exit);
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
new file mode 100644
index 000000000..30924b570
--- /dev/null
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  GPIO driven matrix keyboard driver
+ *
+ *  Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  Based on corgikbd.c
+ */
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+struct matrix_keypad {
+	const struct matrix_keypad_platform_data *pdata;
+	struct input_dev *input_dev;
+	unsigned int row_shift;
+
+	DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS);
+
+	uint32_t last_key_state[MATRIX_MAX_COLS];
+	struct delayed_work work;
+	spinlock_t lock;
+	bool scan_pending;
+	bool stopped;
+	bool gpio_all_disabled;
+};
+
+/*
+ * NOTE: If drive_inactive_cols is false, then the GPIO has to be put into
+ * HiZ when de-activated to cause minmal side effect when scanning other
+ * columns. In that case it is configured here to be input, otherwise it is
+ * driven with the inactive value.
+ */
+static void __activate_col(const struct matrix_keypad_platform_data *pdata,
+			   int col, bool on)
+{
+	bool level_on = !pdata->active_low;
+
+	if (on) {
+		gpio_direction_output(pdata->col_gpios[col], level_on);
+	} else {
+		gpio_set_value_cansleep(pdata->col_gpios[col], !level_on);
+		if (!pdata->drive_inactive_cols)
+			gpio_direction_input(pdata->col_gpios[col]);
+	}
+}
+
+static void activate_col(const struct matrix_keypad_platform_data *pdata,
+			 int col, bool on)
+{
+	__activate_col(pdata, col, on);
+
+	if (on && pdata->col_scan_delay_us)
+		udelay(pdata->col_scan_delay_us);
+}
+
+static void activate_all_cols(const struct matrix_keypad_platform_data *pdata,
+			      bool on)
+{
+	int col;
+
+	for (col = 0; col < pdata->num_col_gpios; col++)
+		__activate_col(pdata, col, on);
+}
+
+static bool row_asserted(const struct matrix_keypad_platform_data *pdata,
+			 int row)
+{
+	return gpio_get_value_cansleep(pdata->row_gpios[row]) ?
+			!pdata->active_low : pdata->active_low;
+}
+
+static void enable_row_irqs(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	if (pdata->clustered_irq > 0)
+		enable_irq(pdata->clustered_irq);
+	else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+	}
+}
+
+static void disable_row_irqs(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	if (pdata->clustered_irq > 0)
+		disable_irq_nosync(pdata->clustered_irq);
+	else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+	}
+}
+
+/*
+ * This gets the keys from keyboard and reports it to input subsystem
+ */
+static void matrix_keypad_scan(struct work_struct *work)
+{
+	struct matrix_keypad *keypad =
+		container_of(work, struct matrix_keypad, work.work);
+	struct input_dev *input_dev = keypad->input_dev;
+	const unsigned short *keycodes = input_dev->keycode;
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	uint32_t new_state[MATRIX_MAX_COLS];
+	int row, col, code;
+
+	/* de-activate all columns for scanning */
+	activate_all_cols(pdata, false);
+
+	memset(new_state, 0, sizeof(new_state));
+
+	/* assert each column and read the row status out */
+	for (col = 0; col < pdata->num_col_gpios; col++) {
+
+		activate_col(pdata, col, true);
+
+		for (row = 0; row < pdata->num_row_gpios; row++)
+			new_state[col] |=
+				row_asserted(pdata, row) ? (1 << row) : 0;
+
+		activate_col(pdata, col, false);
+	}
+
+	for (col = 0; col < pdata->num_col_gpios; col++) {
+		uint32_t bits_changed;
+
+		bits_changed = keypad->last_key_state[col] ^ new_state[col];
+		if (bits_changed == 0)
+			continue;
+
+		for (row = 0; row < pdata->num_row_gpios; row++) {
+			if ((bits_changed & (1 << row)) == 0)
+				continue;
+
+			code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+			input_event(input_dev, EV_MSC, MSC_SCAN, code);
+			input_report_key(input_dev,
+					 keycodes[code],
+					 new_state[col] & (1 << row));
+		}
+	}
+	input_sync(input_dev);
+
+	memcpy(keypad->last_key_state, new_state, sizeof(new_state));
+
+	activate_all_cols(pdata, true);
+
+	/* Enable IRQs again */
+	spin_lock_irq(&keypad->lock);
+	keypad->scan_pending = false;
+	enable_row_irqs(keypad);
+	spin_unlock_irq(&keypad->lock);
+}
+
+static irqreturn_t matrix_keypad_interrupt(int irq, void *id)
+{
+	struct matrix_keypad *keypad = id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&keypad->lock, flags);
+
+	/*
+	 * See if another IRQ beaten us to it and scheduled the
+	 * scan already. In that case we should not try to
+	 * disable IRQs again.
+	 */
+	if (unlikely(keypad->scan_pending || keypad->stopped))
+		goto out;
+
+	disable_row_irqs(keypad);
+	keypad->scan_pending = true;
+	schedule_delayed_work(&keypad->work,
+		msecs_to_jiffies(keypad->pdata->debounce_ms));
+
+out:
+	spin_unlock_irqrestore(&keypad->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static int matrix_keypad_start(struct input_dev *dev)
+{
+	struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+	keypad->stopped = false;
+	mb();
+
+	/*
+	 * Schedule an immediate key scan to capture current key state;
+	 * columns will be activated and IRQs be enabled after the scan.
+	 */
+	schedule_delayed_work(&keypad->work, 0);
+
+	return 0;
+}
+
+static void matrix_keypad_stop(struct input_dev *dev)
+{
+	struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+	spin_lock_irq(&keypad->lock);
+	keypad->stopped = true;
+	spin_unlock_irq(&keypad->lock);
+
+	flush_delayed_work(&keypad->work);
+	/*
+	 * matrix_keypad_scan() will leave IRQs enabled;
+	 * we should disable them now.
+	 */
+	disable_row_irqs(keypad);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int gpio;
+	int i;
+
+	if (pdata->clustered_irq > 0) {
+		if (enable_irq_wake(pdata->clustered_irq) == 0)
+			keypad->gpio_all_disabled = true;
+	} else {
+
+		for (i = 0; i < pdata->num_row_gpios; i++) {
+			if (!test_bit(i, keypad->disabled_gpios)) {
+				gpio = pdata->row_gpios[i];
+
+				if (enable_irq_wake(gpio_to_irq(gpio)) == 0)
+					__set_bit(i, keypad->disabled_gpios);
+			}
+		}
+	}
+}
+
+static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int gpio;
+	int i;
+
+	if (pdata->clustered_irq > 0) {
+		if (keypad->gpio_all_disabled) {
+			disable_irq_wake(pdata->clustered_irq);
+			keypad->gpio_all_disabled = false;
+		}
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++) {
+			if (test_and_clear_bit(i, keypad->disabled_gpios)) {
+				gpio = pdata->row_gpios[i];
+				disable_irq_wake(gpio_to_irq(gpio));
+			}
+		}
+	}
+}
+
+static int matrix_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+
+	matrix_keypad_stop(keypad->input_dev);
+
+	if (device_may_wakeup(&pdev->dev))
+		matrix_keypad_enable_wakeup(keypad);
+
+	return 0;
+}
+
+static int matrix_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		matrix_keypad_disable_wakeup(keypad);
+
+	matrix_keypad_start(keypad->input_dev);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
+			 matrix_keypad_suspend, matrix_keypad_resume);
+
+static int matrix_keypad_init_gpio(struct platform_device *pdev,
+				   struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i, err;
+
+	/* initialized strobe lines as outputs, activated */
+	for (i = 0; i < pdata->num_col_gpios; i++) {
+		err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col");
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to request GPIO%d for COL%d\n",
+				pdata->col_gpios[i], i);
+			goto err_free_cols;
+		}
+
+		gpio_direction_output(pdata->col_gpios[i], !pdata->active_low);
+	}
+
+	for (i = 0; i < pdata->num_row_gpios; i++) {
+		err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row");
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to request GPIO%d for ROW%d\n",
+				pdata->row_gpios[i], i);
+			goto err_free_rows;
+		}
+
+		gpio_direction_input(pdata->row_gpios[i]);
+	}
+
+	if (pdata->clustered_irq > 0) {
+		err = request_any_context_irq(pdata->clustered_irq,
+				matrix_keypad_interrupt,
+				pdata->clustered_irq_flags,
+				"matrix-keypad", keypad);
+		if (err < 0) {
+			dev_err(&pdev->dev,
+				"Unable to acquire clustered interrupt\n");
+			goto err_free_rows;
+		}
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++) {
+			err = request_any_context_irq(
+					gpio_to_irq(pdata->row_gpios[i]),
+					matrix_keypad_interrupt,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING,
+					"matrix-keypad", keypad);
+			if (err < 0) {
+				dev_err(&pdev->dev,
+					"Unable to acquire interrupt for GPIO line %i\n",
+					pdata->row_gpios[i]);
+				goto err_free_irqs;
+			}
+		}
+	}
+
+	/* initialized as disabled - enabled by input->open */
+	disable_row_irqs(keypad);
+	return 0;
+
+err_free_irqs:
+	while (--i >= 0)
+		free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+	i = pdata->num_row_gpios;
+err_free_rows:
+	while (--i >= 0)
+		gpio_free(pdata->row_gpios[i]);
+	i = pdata->num_col_gpios;
+err_free_cols:
+	while (--i >= 0)
+		gpio_free(pdata->col_gpios[i]);
+
+	return err;
+}
+
+static void matrix_keypad_free_gpio(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	if (pdata->clustered_irq > 0) {
+		free_irq(pdata->clustered_irq, keypad);
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+	}
+
+	for (i = 0; i < pdata->num_row_gpios; i++)
+		gpio_free(pdata->row_gpios[i]);
+
+	for (i = 0; i < pdata->num_col_gpios; i++)
+		gpio_free(pdata->col_gpios[i]);
+}
+
+#ifdef CONFIG_OF
+static struct matrix_keypad_platform_data *
+matrix_keypad_parse_dt(struct device *dev)
+{
+	struct matrix_keypad_platform_data *pdata;
+	struct device_node *np = dev->of_node;
+	unsigned int *gpios;
+	int ret, i, nrow, ncol;
+
+	if (!np) {
+		dev_err(dev, "device lacks DT data\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "could not allocate memory for platform data\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pdata->num_row_gpios = nrow = of_gpio_named_count(np, "row-gpios");
+	pdata->num_col_gpios = ncol = of_gpio_named_count(np, "col-gpios");
+	if (nrow <= 0 || ncol <= 0) {
+		dev_err(dev, "number of keypad rows/columns not specified\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (of_get_property(np, "linux,no-autorepeat", NULL))
+		pdata->no_autorepeat = true;
+
+	pdata->wakeup = of_property_read_bool(np, "wakeup-source") ||
+			of_property_read_bool(np, "linux,wakeup"); /* legacy */
+
+	if (of_get_property(np, "gpio-activelow", NULL))
+		pdata->active_low = true;
+
+	pdata->drive_inactive_cols =
+		of_property_read_bool(np, "drive-inactive-cols");
+
+	of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms);
+	of_property_read_u32(np, "col-scan-delay-us",
+						&pdata->col_scan_delay_us);
+
+	gpios = devm_kcalloc(dev,
+			     pdata->num_row_gpios + pdata->num_col_gpios,
+			     sizeof(unsigned int),
+			     GFP_KERNEL);
+	if (!gpios) {
+		dev_err(dev, "could not allocate memory for gpios\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	for (i = 0; i < nrow; i++) {
+		ret = of_get_named_gpio(np, "row-gpios", i);
+		if (ret < 0)
+			return ERR_PTR(ret);
+		gpios[i] = ret;
+	}
+
+	for (i = 0; i < ncol; i++) {
+		ret = of_get_named_gpio(np, "col-gpios", i);
+		if (ret < 0)
+			return ERR_PTR(ret);
+		gpios[nrow + i] = ret;
+	}
+
+	pdata->row_gpios = gpios;
+	pdata->col_gpios = &gpios[pdata->num_row_gpios];
+
+	return pdata;
+}
+#else
+static inline struct matrix_keypad_platform_data *
+matrix_keypad_parse_dt(struct device *dev)
+{
+	dev_err(dev, "no platform data defined\n");
+
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
+static int matrix_keypad_probe(struct platform_device *pdev)
+{
+	const struct matrix_keypad_platform_data *pdata;
+	struct matrix_keypad *keypad;
+	struct input_dev *input_dev;
+	int err;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		pdata = matrix_keypad_parse_dt(&pdev->dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	} else if (!pdata->keymap_data) {
+		dev_err(&pdev->dev, "no keymap data defined\n");
+		return -EINVAL;
+	}
+
+	keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!keypad || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	keypad->input_dev = input_dev;
+	keypad->pdata = pdata;
+	keypad->row_shift = get_count_order(pdata->num_col_gpios);
+	keypad->stopped = true;
+	INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
+	spin_lock_init(&keypad->lock);
+
+	input_dev->name		= pdev->name;
+	input_dev->id.bustype	= BUS_HOST;
+	input_dev->dev.parent	= &pdev->dev;
+	input_dev->open		= matrix_keypad_start;
+	input_dev->close	= matrix_keypad_stop;
+
+	err = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+					 pdata->num_row_gpios,
+					 pdata->num_col_gpios,
+					 NULL, input_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_free_mem;
+	}
+
+	if (!pdata->no_autorepeat)
+		__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, keypad);
+
+	err = matrix_keypad_init_gpio(pdev, keypad);
+	if (err)
+		goto err_free_mem;
+
+	err = input_register_device(keypad->input_dev);
+	if (err)
+		goto err_free_gpio;
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+err_free_gpio:
+	matrix_keypad_free_gpio(keypad);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(keypad);
+	return err;
+}
+
+static int matrix_keypad_remove(struct platform_device *pdev)
+{
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+
+	matrix_keypad_free_gpio(keypad);
+	input_unregister_device(keypad->input_dev);
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id matrix_keypad_dt_match[] = {
+	{ .compatible = "gpio-matrix-keypad" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, matrix_keypad_dt_match);
+#endif
+
+static struct platform_driver matrix_keypad_driver = {
+	.probe		= matrix_keypad_probe,
+	.remove		= matrix_keypad_remove,
+	.driver		= {
+		.name	= "matrix-keypad",
+		.pm	= &matrix_keypad_pm_ops,
+		.of_match_table = of_match_ptr(matrix_keypad_dt_match),
+	},
+};
+module_platform_driver(matrix_keypad_driver);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:matrix-keypad");
diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
new file mode 100644
index 000000000..62ce93462
--- /dev/null
+++ b/drivers/input/keyboard/max7359_keypad.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * max7359_keypad.c - MAX7359 Key Switch Controller Driver
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kim Kyuwon <q1.kim@samsung.com>
+ *
+ * Based on pxa27x_keypad.c
+ *
+ * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+
+#define MAX7359_MAX_KEY_ROWS	8
+#define MAX7359_MAX_KEY_COLS	8
+#define MAX7359_MAX_KEY_NUM	(MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS)
+#define MAX7359_ROW_SHIFT	3
+
+/*
+ * MAX7359 registers
+ */
+#define MAX7359_REG_KEYFIFO	0x00
+#define MAX7359_REG_CONFIG	0x01
+#define MAX7359_REG_DEBOUNCE	0x02
+#define MAX7359_REG_INTERRUPT	0x03
+#define MAX7359_REG_PORTS	0x04
+#define MAX7359_REG_KEYREP	0x05
+#define MAX7359_REG_SLEEP	0x06
+
+/*
+ * Configuration register bits
+ */
+#define MAX7359_CFG_SLEEP	(1 << 7)
+#define MAX7359_CFG_INTERRUPT	(1 << 5)
+#define MAX7359_CFG_KEY_RELEASE	(1 << 3)
+#define MAX7359_CFG_WAKEUP	(1 << 1)
+#define MAX7359_CFG_TIMEOUT	(1 << 0)
+
+/*
+ * Autosleep register values (ms)
+ */
+#define MAX7359_AUTOSLEEP_8192	0x01
+#define MAX7359_AUTOSLEEP_4096	0x02
+#define MAX7359_AUTOSLEEP_2048	0x03
+#define MAX7359_AUTOSLEEP_1024	0x04
+#define MAX7359_AUTOSLEEP_512	0x05
+#define MAX7359_AUTOSLEEP_256	0x06
+
+struct max7359_keypad {
+	/* matrix key code map */
+	unsigned short keycodes[MAX7359_MAX_KEY_NUM];
+
+	struct input_dev *input_dev;
+	struct i2c_client *client;
+};
+
+static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+	int ret = i2c_smbus_write_byte_data(client, reg, val);
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
+			__func__, reg, val, ret);
+	return ret;
+}
+
+static int max7359_read_reg(struct i2c_client *client, int reg)
+{
+	int ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: reg 0x%x, err %d\n",
+			__func__, reg, ret);
+	return ret;
+}
+
+/* runs in an IRQ thread -- can (and will!) sleep */
+static irqreturn_t max7359_interrupt(int irq, void *dev_id)
+{
+	struct max7359_keypad *keypad = dev_id;
+	struct input_dev *input_dev = keypad->input_dev;
+	int val, row, col, release, code;
+
+	val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO);
+	row = val & 0x7;
+	col = (val >> 3) & 0x7;
+	release = val & 0x40;
+
+	code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT);
+
+	dev_dbg(&keypad->client->dev,
+		"key[%d:%d] %s\n", row, col, release ? "release" : "press");
+
+	input_event(input_dev, EV_MSC, MSC_SCAN, code);
+	input_report_key(input_dev, keypad->keycodes[code], !release);
+	input_sync(input_dev);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Let MAX7359 fall into a deep sleep:
+ * If no keys are pressed, enter sleep mode for 8192 ms. And if any
+ * key is pressed, the MAX7359 returns to normal operating mode.
+ */
+static inline void max7359_fall_deepsleep(struct i2c_client *client)
+{
+	max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192);
+}
+
+/*
+ * Let MAX7359 take a catnap:
+ * Autosleep just for 256 ms.
+ */
+static inline void max7359_take_catnap(struct i2c_client *client)
+{
+	max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256);
+}
+
+static int max7359_open(struct input_dev *dev)
+{
+	struct max7359_keypad *keypad = input_get_drvdata(dev);
+
+	max7359_take_catnap(keypad->client);
+
+	return 0;
+}
+
+static void max7359_close(struct input_dev *dev)
+{
+	struct max7359_keypad *keypad = input_get_drvdata(dev);
+
+	max7359_fall_deepsleep(keypad->client);
+}
+
+static void max7359_initialize(struct i2c_client *client)
+{
+	max7359_write_reg(client, MAX7359_REG_CONFIG,
+		MAX7359_CFG_KEY_RELEASE | /* Key release enable */
+		MAX7359_CFG_WAKEUP); /* Key press wakeup enable */
+
+	/* Full key-scan functionality */
+	max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F);
+
+	/* nINT asserts every debounce cycles */
+	max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01);
+
+	max7359_fall_deepsleep(client);
+}
+
+static int max7359_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	const struct matrix_keymap_data *keymap_data =
+			dev_get_platdata(&client->dev);
+	struct max7359_keypad *keypad;
+	struct input_dev *input_dev;
+	int ret;
+	int error;
+
+	if (!client->irq) {
+		dev_err(&client->dev, "The irq number should not be zero\n");
+		return -EINVAL;
+	}
+
+	/* Detect MAX7359: The initial Keys FIFO value is '0x3F' */
+	ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed to detect device\n");
+		return -ENODEV;
+	}
+
+	dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret);
+
+	keypad = devm_kzalloc(&client->dev, sizeof(struct max7359_keypad),
+			      GFP_KERNEL);
+	if (!keypad) {
+		dev_err(&client->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev) {
+		dev_err(&client->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	keypad->client = client;
+	keypad->input_dev = input_dev;
+
+	input_dev->name = client->name;
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->open = max7359_open;
+	input_dev->close = max7359_close;
+	input_dev->dev.parent = &client->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+	input_dev->keycode = keypad->keycodes;
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, keypad);
+
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   MAX7359_MAX_KEY_ROWS,
+					   MAX7359_MAX_KEY_COLS,
+					   keypad->keycodes,
+					   input_dev);
+	if (error) {
+		dev_err(&client->dev, "failed to build keymap\n");
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					  max7359_interrupt,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  client->name, keypad);
+	if (error) {
+		dev_err(&client->dev, "failed to register interrupt\n");
+		return error;
+	}
+
+	/* Register the input device */
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&client->dev, "failed to register input device\n");
+		return error;
+	}
+
+	/* Initialize MAX7359 */
+	max7359_initialize(client);
+
+	device_init_wakeup(&client->dev, 1);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max7359_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	max7359_fall_deepsleep(client);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int max7359_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	/* Restore the default setting */
+	max7359_take_catnap(client);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(max7359_pm, max7359_suspend, max7359_resume);
+
+static const struct i2c_device_id max7359_ids[] = {
+	{ "max7359", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max7359_ids);
+
+static struct i2c_driver max7359_i2c_driver = {
+	.driver = {
+		.name = "max7359",
+		.pm   = &max7359_pm,
+	},
+	.probe		= max7359_probe,
+	.id_table	= max7359_ids,
+};
+
+module_i2c_driver(max7359_i2c_driver);
+
+MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
+MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
new file mode 100644
index 000000000..8cb0062b9
--- /dev/null
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Touchkey driver for MELFAS MCS5000/5080 controller
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/platform_data/mcs.h>
+#include <linux/pm.h>
+
+/* MCS5000 Touchkey */
+#define MCS5000_TOUCHKEY_STATUS		0x04
+#define MCS5000_TOUCHKEY_STATUS_PRESS	7
+#define MCS5000_TOUCHKEY_FW		0x0a
+#define MCS5000_TOUCHKEY_BASE_VAL	0x61
+
+/* MCS5080 Touchkey */
+#define MCS5080_TOUCHKEY_STATUS		0x00
+#define MCS5080_TOUCHKEY_STATUS_PRESS	3
+#define MCS5080_TOUCHKEY_FW		0x01
+#define MCS5080_TOUCHKEY_BASE_VAL	0x1
+
+enum mcs_touchkey_type {
+	MCS5000_TOUCHKEY,
+	MCS5080_TOUCHKEY,
+};
+
+struct mcs_touchkey_chip {
+	unsigned int status_reg;
+	unsigned int pressbit;
+	unsigned int press_invert;
+	unsigned int baseval;
+};
+
+struct mcs_touchkey_data {
+	void (*poweron)(bool);
+
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct mcs_touchkey_chip chip;
+	unsigned int key_code;
+	unsigned int key_val;
+	unsigned short keycodes[];
+};
+
+static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id)
+{
+	struct mcs_touchkey_data *data = dev_id;
+	struct mcs_touchkey_chip *chip = &data->chip;
+	struct i2c_client *client = data->client;
+	struct input_dev *input = data->input_dev;
+	unsigned int key_val;
+	unsigned int pressed;
+	int val;
+
+	val = i2c_smbus_read_byte_data(client, chip->status_reg);
+	if (val < 0) {
+		dev_err(&client->dev, "i2c read error [%d]\n", val);
+		goto out;
+	}
+
+	pressed = (val & (1 << chip->pressbit)) >> chip->pressbit;
+	if (chip->press_invert)
+		pressed ^= chip->press_invert;
+
+	/* key_val is 0 when released, so we should use key_val of press. */
+	if (pressed) {
+		key_val = val & (0xff >> (8 - chip->pressbit));
+		if (!key_val)
+			goto out;
+		key_val -= chip->baseval;
+		data->key_code = data->keycodes[key_val];
+		data->key_val = key_val;
+	}
+
+	input_event(input, EV_MSC, MSC_SCAN, data->key_val);
+	input_report_key(input, data->key_code, pressed);
+	input_sync(input);
+
+	dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code,
+		pressed ? "pressed" : "released");
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static int mcs_touchkey_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	const struct mcs_platform_data *pdata;
+	struct mcs_touchkey_data *data;
+	struct input_dev *input_dev;
+	unsigned int fw_reg;
+	int fw_ver;
+	int error;
+	int i;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	data = kzalloc(struct_size(data, keycodes, pdata->key_maxval + 1),
+		       GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->client = client;
+	data->input_dev = input_dev;
+
+	if (id->driver_data == MCS5000_TOUCHKEY) {
+		data->chip.status_reg = MCS5000_TOUCHKEY_STATUS;
+		data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS;
+		data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL;
+		fw_reg = MCS5000_TOUCHKEY_FW;
+	} else {
+		data->chip.status_reg = MCS5080_TOUCHKEY_STATUS;
+		data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS;
+		data->chip.press_invert = 1;
+		data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL;
+		fw_reg = MCS5080_TOUCHKEY_FW;
+	}
+
+	fw_ver = i2c_smbus_read_byte_data(client, fw_reg);
+	if (fw_ver < 0) {
+		error = fw_ver;
+		dev_err(&client->dev, "i2c read error[%d]\n", error);
+		goto err_free_mem;
+	}
+	dev_info(&client->dev, "Firmware version: %d\n", fw_ver);
+
+	input_dev->name = "MELFAS MCS Touchkey";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	if (!pdata->no_autorepeat)
+		input_dev->evbit[0] |= BIT_MASK(EV_REP);
+	input_dev->keycode = data->keycodes;
+	input_dev->keycodesize = sizeof(data->keycodes[0]);
+	input_dev->keycodemax = pdata->key_maxval + 1;
+
+	for (i = 0; i < pdata->keymap_size; i++) {
+		unsigned int val = MCS_KEY_VAL(pdata->keymap[i]);
+		unsigned int code = MCS_KEY_CODE(pdata->keymap[i]);
+
+		data->keycodes[val] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, data);
+
+	if (pdata->cfg_pin)
+		pdata->cfg_pin();
+
+	if (pdata->poweron) {
+		data->poweron = pdata->poweron;
+		data->poweron(true);
+	}
+
+	error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
+				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				     client->dev.driver->name, data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_free_irq;
+
+	i2c_set_clientdata(client, data);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+	return error;
+}
+
+static int mcs_touchkey_remove(struct i2c_client *client)
+{
+	struct mcs_touchkey_data *data = i2c_get_clientdata(client);
+
+	free_irq(client->irq, data);
+	if (data->poweron)
+		data->poweron(false);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+
+	return 0;
+}
+
+static void mcs_touchkey_shutdown(struct i2c_client *client)
+{
+	struct mcs_touchkey_data *data = i2c_get_clientdata(client);
+
+	if (data->poweron)
+		data->poweron(false);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mcs_touchkey_suspend(struct device *dev)
+{
+	struct mcs_touchkey_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+
+	/* Disable the work */
+	disable_irq(client->irq);
+
+	/* Finally turn off the power */
+	if (data->poweron)
+		data->poweron(false);
+
+	return 0;
+}
+
+static int mcs_touchkey_resume(struct device *dev)
+{
+	struct mcs_touchkey_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+
+	/* Enable the device first */
+	if (data->poweron)
+		data->poweron(true);
+
+	/* Enable irq again */
+	enable_irq(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops,
+			 mcs_touchkey_suspend, mcs_touchkey_resume);
+
+static const struct i2c_device_id mcs_touchkey_id[] = {
+	{ "mcs5000_touchkey", MCS5000_TOUCHKEY },
+	{ "mcs5080_touchkey", MCS5080_TOUCHKEY },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id);
+
+static struct i2c_driver mcs_touchkey_driver = {
+	.driver = {
+		.name	= "mcs_touchkey",
+		.pm	= &mcs_touchkey_pm_ops,
+	},
+	.probe		= mcs_touchkey_probe,
+	.remove		= mcs_touchkey_remove,
+	.shutdown       = mcs_touchkey_shutdown,
+	.id_table	= mcs_touchkey_id,
+};
+
+module_i2c_driver(mcs_touchkey_driver);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>");
+MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
new file mode 100644
index 000000000..40d6e5087
--- /dev/null
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Touchkey driver for Freescale MPR121 Controllor
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Zhang Jiejing <jiejing.zhang@freescale.com>
+ *
+ * Based on mcs_touchkey.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Register definitions */
+#define ELE_TOUCH_STATUS_0_ADDR	0x0
+#define ELE_TOUCH_STATUS_1_ADDR	0X1
+#define MHD_RISING_ADDR		0x2b
+#define NHD_RISING_ADDR		0x2c
+#define NCL_RISING_ADDR		0x2d
+#define FDL_RISING_ADDR		0x2e
+#define MHD_FALLING_ADDR	0x2f
+#define NHD_FALLING_ADDR	0x30
+#define NCL_FALLING_ADDR	0x31
+#define FDL_FALLING_ADDR	0x32
+#define ELE0_TOUCH_THRESHOLD_ADDR	0x41
+#define ELE0_RELEASE_THRESHOLD_ADDR	0x42
+#define AFE_CONF_ADDR			0x5c
+#define FILTER_CONF_ADDR		0x5d
+
+/*
+ * ELECTRODE_CONF_ADDR: This register configures the number of
+ * enabled capacitance sensing inputs and its run/suspend mode.
+ */
+#define ELECTRODE_CONF_ADDR		0x5e
+#define ELECTRODE_CONF_QUICK_CHARGE	0x80
+#define AUTO_CONFIG_CTRL_ADDR		0x7b
+#define AUTO_CONFIG_USL_ADDR		0x7d
+#define AUTO_CONFIG_LSL_ADDR		0x7e
+#define AUTO_CONFIG_TL_ADDR		0x7f
+
+/* Threshold of touch/release trigger */
+#define TOUCH_THRESHOLD			0x08
+#define RELEASE_THRESHOLD		0x05
+/* Masks for touch and release triggers */
+#define TOUCH_STATUS_MASK		0xfff
+/* MPR121 has 12 keys */
+#define MPR121_MAX_KEY_COUNT		12
+
+#define MPR121_MIN_POLL_INTERVAL	10
+#define MPR121_MAX_POLL_INTERVAL	200
+
+struct mpr121_touchkey {
+	struct i2c_client	*client;
+	struct input_dev	*input_dev;
+	unsigned int		statusbits;
+	unsigned int		keycount;
+	u32			keycodes[MPR121_MAX_KEY_COUNT];
+};
+
+struct mpr121_init_register {
+	int addr;
+	u8 val;
+};
+
+static const struct mpr121_init_register init_reg_table[] = {
+	{ MHD_RISING_ADDR,	0x1 },
+	{ NHD_RISING_ADDR,	0x1 },
+	{ MHD_FALLING_ADDR,	0x1 },
+	{ NHD_FALLING_ADDR,	0x1 },
+	{ NCL_FALLING_ADDR,	0xff },
+	{ FDL_FALLING_ADDR,	0x02 },
+	{ FILTER_CONF_ADDR,	0x04 },
+	{ AFE_CONF_ADDR,	0x0b },
+	{ AUTO_CONFIG_CTRL_ADDR, 0x0b },
+};
+
+static void mpr121_vdd_supply_disable(void *data)
+{
+	struct regulator *vdd_supply = data;
+
+	regulator_disable(vdd_supply);
+}
+
+static struct regulator *mpr121_vdd_supply_init(struct device *dev)
+{
+	struct regulator *vdd_supply;
+	int err;
+
+	vdd_supply = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(vdd_supply)) {
+		dev_err(dev, "failed to get vdd regulator: %ld\n",
+			PTR_ERR(vdd_supply));
+		return vdd_supply;
+	}
+
+	err = regulator_enable(vdd_supply);
+	if (err) {
+		dev_err(dev, "failed to enable vdd regulator: %d\n", err);
+		return ERR_PTR(err);
+	}
+
+	err = devm_add_action(dev, mpr121_vdd_supply_disable, vdd_supply);
+	if (err) {
+		regulator_disable(vdd_supply);
+		dev_err(dev, "failed to add disable regulator action: %d\n",
+			err);
+		return ERR_PTR(err);
+	}
+
+	return vdd_supply;
+}
+
+static void mpr_touchkey_report(struct input_dev *dev)
+{
+	struct mpr121_touchkey *mpr121 = input_get_drvdata(dev);
+	struct input_dev *input = mpr121->input_dev;
+	struct i2c_client *client = mpr121->client;
+	unsigned long bit_changed;
+	unsigned int key_num;
+	int reg;
+
+	reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
+	if (reg < 0) {
+		dev_err(&client->dev, "i2c read error [%d]\n", reg);
+		return;
+	}
+
+	reg <<= 8;
+	reg |= i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_0_ADDR);
+	if (reg < 0) {
+		dev_err(&client->dev, "i2c read error [%d]\n", reg);
+		return;
+	}
+
+	reg &= TOUCH_STATUS_MASK;
+	/* use old press bit to figure out which bit changed */
+	bit_changed = reg ^ mpr121->statusbits;
+	mpr121->statusbits = reg;
+	for_each_set_bit(key_num, &bit_changed, mpr121->keycount) {
+		unsigned int key_val, pressed;
+
+		pressed = reg & BIT(key_num);
+		key_val = mpr121->keycodes[key_num];
+
+		input_event(input, EV_MSC, MSC_SCAN, key_num);
+		input_report_key(input, key_val, pressed);
+
+		dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
+			pressed ? "pressed" : "released");
+
+	}
+	input_sync(input);
+}
+
+static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
+{
+	struct mpr121_touchkey *mpr121 = dev_id;
+
+	mpr_touchkey_report(mpr121->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int mpr121_phys_init(struct mpr121_touchkey *mpr121,
+			    struct i2c_client *client, int vdd_uv)
+{
+	const struct mpr121_init_register *reg;
+	unsigned char usl, lsl, tl, eleconf;
+	int i, t, vdd, ret;
+
+	/* Set up touch/release threshold for ele0-ele11 */
+	for (i = 0; i <= MPR121_MAX_KEY_COUNT; i++) {
+		t = ELE0_TOUCH_THRESHOLD_ADDR + (i * 2);
+		ret = i2c_smbus_write_byte_data(client, t, TOUCH_THRESHOLD);
+		if (ret < 0)
+			goto err_i2c_write;
+		ret = i2c_smbus_write_byte_data(client, t + 1,
+						RELEASE_THRESHOLD);
+		if (ret < 0)
+			goto err_i2c_write;
+	}
+
+	/* Set up init register */
+	for (i = 0; i < ARRAY_SIZE(init_reg_table); i++) {
+		reg = &init_reg_table[i];
+		ret = i2c_smbus_write_byte_data(client, reg->addr, reg->val);
+		if (ret < 0)
+			goto err_i2c_write;
+	}
+
+
+	/*
+	 * Capacitance on sensing input varies and needs to be compensated.
+	 * The internal MPR121-auto-configuration can do this if it's
+	 * registers are set properly (based on vdd_uv).
+	 */
+	vdd = vdd_uv / 1000;
+	usl = ((vdd - 700) * 256) / vdd;
+	lsl = (usl * 65) / 100;
+	tl = (usl * 90) / 100;
+	ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl);
+	ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl);
+	ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl);
+
+	/*
+	 * Quick charge bit will let the capacitive charge to ready
+	 * state quickly, or the buttons may not function after system
+	 * boot.
+	 */
+	eleconf = mpr121->keycount | ELECTRODE_CONF_QUICK_CHARGE;
+	ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
+					 eleconf);
+	if (ret != 0)
+		goto err_i2c_write;
+
+	dev_dbg(&client->dev, "set up with %x keys.\n", mpr121->keycount);
+
+	return 0;
+
+err_i2c_write:
+	dev_err(&client->dev, "i2c write error: %d\n", ret);
+	return ret;
+}
+
+static int mpr_touchkey_probe(struct i2c_client *client,
+			      const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct regulator *vdd_supply;
+	int vdd_uv;
+	struct mpr121_touchkey *mpr121;
+	struct input_dev *input_dev;
+	u32 poll_interval = 0;
+	int error;
+	int i;
+
+	vdd_supply = mpr121_vdd_supply_init(dev);
+	if (IS_ERR(vdd_supply))
+		return PTR_ERR(vdd_supply);
+
+	vdd_uv = regulator_get_voltage(vdd_supply);
+
+	mpr121 = devm_kzalloc(dev, sizeof(*mpr121), GFP_KERNEL);
+	if (!mpr121)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(dev);
+	if (!input_dev)
+		return -ENOMEM;
+
+	mpr121->client = client;
+	mpr121->input_dev = input_dev;
+	mpr121->keycount = device_property_count_u32(dev, "linux,keycodes");
+	if (mpr121->keycount > MPR121_MAX_KEY_COUNT) {
+		dev_err(dev, "too many keys defined (%d)\n", mpr121->keycount);
+		return -EINVAL;
+	}
+
+	error = device_property_read_u32_array(dev, "linux,keycodes",
+					       mpr121->keycodes,
+					       mpr121->keycount);
+	if (error) {
+		dev_err(dev,
+			"failed to read linux,keycode property: %d\n", error);
+		return error;
+	}
+
+	input_dev->name = "Freescale MPR121 Touchkey";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = dev;
+	if (device_property_read_bool(dev, "autorepeat"))
+		__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, mpr121);
+
+	input_dev->keycode = mpr121->keycodes;
+	input_dev->keycodesize = sizeof(mpr121->keycodes[0]);
+	input_dev->keycodemax = mpr121->keycount;
+
+	for (i = 0; i < mpr121->keycount; i++)
+		input_set_capability(input_dev, EV_KEY, mpr121->keycodes[i]);
+
+	error = mpr121_phys_init(mpr121, client, vdd_uv);
+	if (error) {
+		dev_err(dev, "Failed to init register\n");
+		return error;
+	}
+
+	device_property_read_u32(dev, "poll-interval", &poll_interval);
+
+	if (client->irq) {
+		error = devm_request_threaded_irq(dev, client->irq, NULL,
+						  mpr_touchkey_interrupt,
+						  IRQF_TRIGGER_FALLING |
+						  IRQF_ONESHOT,
+						  dev->driver->name, mpr121);
+		if (error) {
+			dev_err(dev, "Failed to register interrupt\n");
+			return error;
+		}
+	} else if (poll_interval) {
+		if (poll_interval < MPR121_MIN_POLL_INTERVAL)
+			return -EINVAL;
+
+		if (poll_interval > MPR121_MAX_POLL_INTERVAL)
+			return -EINVAL;
+
+		error = input_setup_polling(input_dev, mpr_touchkey_report);
+		if (error) {
+			dev_err(dev, "Failed to setup polling\n");
+			return error;
+		}
+
+		input_set_poll_interval(input_dev, poll_interval);
+		input_set_min_poll_interval(input_dev,
+					    MPR121_MIN_POLL_INTERVAL);
+		input_set_max_poll_interval(input_dev,
+					    MPR121_MAX_POLL_INTERVAL);
+	} else {
+		dev_err(dev,
+			"invalid IRQ number and polling not configured\n");
+		return -EINVAL;
+	}
+
+	error = input_register_device(input_dev);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, mpr121);
+	device_init_wakeup(dev,
+			device_property_read_bool(dev, "wakeup-source"));
+
+	return 0;
+}
+
+static int __maybe_unused mpr_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, 0x00);
+
+	return 0;
+}
+
+static int __maybe_unused mpr_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
+				  mpr121->keycount);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mpr121_touchkey_pm_ops, mpr_suspend, mpr_resume);
+
+static const struct i2c_device_id mpr121_id[] = {
+	{ "mpr121_touchkey", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mpr121_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id mpr121_touchkey_dt_match_table[] = {
+	{ .compatible = "fsl,mpr121-touchkey" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mpr121_touchkey_dt_match_table);
+#endif
+
+static struct i2c_driver mpr_touchkey_driver = {
+	.driver = {
+		.name	= "mpr121",
+		.pm	= &mpr121_touchkey_pm_ops,
+		.of_match_table = of_match_ptr(mpr121_touchkey_dt_match_table),
+	},
+	.id_table	= mpr121_id,
+	.probe		= mpr_touchkey_probe,
+};
+
+module_i2c_driver(mpr_touchkey_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>");
+MODULE_DESCRIPTION("Touch Key driver for Freescale MPR121 Chip");
diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c
new file mode 100644
index 000000000..62391d6c7
--- /dev/null
+++ b/drivers/input/keyboard/mtk-pmic-keys.c
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 MediaTek, Inc.
+ *
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6397/registers.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MTK_PMIC_PWRKEY_RST_EN_MASK	0x1
+#define MTK_PMIC_PWRKEY_RST_EN_SHIFT	6
+#define MTK_PMIC_HOMEKEY_RST_EN_MASK	0x1
+#define MTK_PMIC_HOMEKEY_RST_EN_SHIFT	5
+#define MTK_PMIC_RST_DU_MASK		0x3
+#define MTK_PMIC_RST_DU_SHIFT		8
+
+#define MTK_PMIC_PWRKEY_RST		\
+	(MTK_PMIC_PWRKEY_RST_EN_MASK << MTK_PMIC_PWRKEY_RST_EN_SHIFT)
+#define MTK_PMIC_HOMEKEY_RST		\
+	(MTK_PMIC_HOMEKEY_RST_EN_MASK << MTK_PMIC_HOMEKEY_RST_EN_SHIFT)
+
+#define MTK_PMIC_PWRKEY_INDEX	0
+#define MTK_PMIC_HOMEKEY_INDEX	1
+#define MTK_PMIC_MAX_KEY_COUNT	2
+
+struct mtk_pmic_keys_regs {
+	u32 deb_reg;
+	u32 deb_mask;
+	u32 intsel_reg;
+	u32 intsel_mask;
+};
+
+#define MTK_PMIC_KEYS_REGS(_deb_reg, _deb_mask,		\
+	_intsel_reg, _intsel_mask)			\
+{							\
+	.deb_reg		= _deb_reg,		\
+	.deb_mask		= _deb_mask,		\
+	.intsel_reg		= _intsel_reg,		\
+	.intsel_mask		= _intsel_mask,		\
+}
+
+struct mtk_pmic_regs {
+	const struct mtk_pmic_keys_regs keys_regs[MTK_PMIC_MAX_KEY_COUNT];
+	u32 pmic_rst_reg;
+};
+
+static const struct mtk_pmic_regs mt6397_regs = {
+	.keys_regs[MTK_PMIC_PWRKEY_INDEX] =
+		MTK_PMIC_KEYS_REGS(MT6397_CHRSTATUS,
+		0x8, MT6397_INT_RSV, 0x10),
+	.keys_regs[MTK_PMIC_HOMEKEY_INDEX] =
+		MTK_PMIC_KEYS_REGS(MT6397_OCSTATUS2,
+		0x10, MT6397_INT_RSV, 0x8),
+	.pmic_rst_reg = MT6397_TOP_RST_MISC,
+};
+
+static const struct mtk_pmic_regs mt6323_regs = {
+	.keys_regs[MTK_PMIC_PWRKEY_INDEX] =
+		MTK_PMIC_KEYS_REGS(MT6323_CHRSTATUS,
+		0x2, MT6323_INT_MISC_CON, 0x10),
+	.keys_regs[MTK_PMIC_HOMEKEY_INDEX] =
+		MTK_PMIC_KEYS_REGS(MT6323_CHRSTATUS,
+		0x4, MT6323_INT_MISC_CON, 0x8),
+	.pmic_rst_reg = MT6323_TOP_RST_MISC,
+};
+
+struct mtk_pmic_keys_info {
+	struct mtk_pmic_keys *keys;
+	const struct mtk_pmic_keys_regs *regs;
+	unsigned int keycode;
+	int irq;
+	bool wakeup:1;
+};
+
+struct mtk_pmic_keys {
+	struct input_dev *input_dev;
+	struct device *dev;
+	struct regmap *regmap;
+	struct mtk_pmic_keys_info keys[MTK_PMIC_MAX_KEY_COUNT];
+};
+
+enum mtk_pmic_keys_lp_mode {
+	LP_DISABLE,
+	LP_ONEKEY,
+	LP_TWOKEY,
+};
+
+static void mtk_pmic_keys_lp_reset_setup(struct mtk_pmic_keys *keys,
+		u32 pmic_rst_reg)
+{
+	int ret;
+	u32 long_press_mode, long_press_debounce;
+
+	ret = of_property_read_u32(keys->dev->of_node,
+		"power-off-time-sec", &long_press_debounce);
+	if (ret)
+		long_press_debounce = 0;
+
+	regmap_update_bits(keys->regmap, pmic_rst_reg,
+			   MTK_PMIC_RST_DU_MASK << MTK_PMIC_RST_DU_SHIFT,
+			   long_press_debounce << MTK_PMIC_RST_DU_SHIFT);
+
+	ret = of_property_read_u32(keys->dev->of_node,
+		"mediatek,long-press-mode", &long_press_mode);
+	if (ret)
+		long_press_mode = LP_DISABLE;
+
+	switch (long_press_mode) {
+	case LP_ONEKEY:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_PWRKEY_RST,
+				   MTK_PMIC_PWRKEY_RST);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_HOMEKEY_RST,
+				   0);
+		break;
+	case LP_TWOKEY:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_PWRKEY_RST,
+				   MTK_PMIC_PWRKEY_RST);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_HOMEKEY_RST,
+				   MTK_PMIC_HOMEKEY_RST);
+		break;
+	case LP_DISABLE:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_PWRKEY_RST,
+				   0);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_HOMEKEY_RST,
+				   0);
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t mtk_pmic_keys_irq_handler_thread(int irq, void *data)
+{
+	struct mtk_pmic_keys_info *info = data;
+	u32 key_deb, pressed;
+
+	regmap_read(info->keys->regmap, info->regs->deb_reg, &key_deb);
+
+	key_deb &= info->regs->deb_mask;
+
+	pressed = !key_deb;
+
+	input_report_key(info->keys->input_dev, info->keycode, pressed);
+	input_sync(info->keys->input_dev);
+
+	dev_dbg(info->keys->dev, "(%s) key =%d using PMIC\n",
+		 pressed ? "pressed" : "released", info->keycode);
+
+	return IRQ_HANDLED;
+}
+
+static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys,
+		struct mtk_pmic_keys_info *info)
+{
+	int ret;
+
+	info->keys = keys;
+
+	ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg,
+				 info->regs->intsel_mask,
+				 info->regs->intsel_mask);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_request_threaded_irq(keys->dev, info->irq, NULL,
+					mtk_pmic_keys_irq_handler_thread,
+					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+					"mtk-pmic-keys", info);
+	if (ret) {
+		dev_err(keys->dev, "Failed to request IRQ: %d: %d\n",
+			info->irq, ret);
+		return ret;
+	}
+
+	input_set_capability(keys->input_dev, EV_KEY, info->keycode);
+
+	return 0;
+}
+
+static int __maybe_unused mtk_pmic_keys_suspend(struct device *dev)
+{
+	struct mtk_pmic_keys *keys = dev_get_drvdata(dev);
+	int index;
+
+	for (index = 0; index < MTK_PMIC_MAX_KEY_COUNT; index++) {
+		if (keys->keys[index].wakeup)
+			enable_irq_wake(keys->keys[index].irq);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused mtk_pmic_keys_resume(struct device *dev)
+{
+	struct mtk_pmic_keys *keys = dev_get_drvdata(dev);
+	int index;
+
+	for (index = 0; index < MTK_PMIC_MAX_KEY_COUNT; index++) {
+		if (keys->keys[index].wakeup)
+			disable_irq_wake(keys->keys[index].irq);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mtk_pmic_keys_pm_ops, mtk_pmic_keys_suspend,
+			mtk_pmic_keys_resume);
+
+static const struct of_device_id of_mtk_pmic_keys_match_tbl[] = {
+	{
+		.compatible = "mediatek,mt6397-keys",
+		.data = &mt6397_regs,
+	}, {
+		.compatible = "mediatek,mt6323-keys",
+		.data = &mt6323_regs,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, of_mtk_pmic_keys_match_tbl);
+
+static int mtk_pmic_keys_probe(struct platform_device *pdev)
+{
+	int error, index = 0;
+	unsigned int keycount;
+	struct mt6397_chip *pmic_chip = dev_get_drvdata(pdev->dev.parent);
+	struct device_node *node = pdev->dev.of_node, *child;
+	struct mtk_pmic_keys *keys;
+	const struct mtk_pmic_regs *mtk_pmic_regs;
+	struct input_dev *input_dev;
+	const struct of_device_id *of_id =
+		of_match_device(of_mtk_pmic_keys_match_tbl, &pdev->dev);
+
+	keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+	if (!keys)
+		return -ENOMEM;
+
+	keys->dev = &pdev->dev;
+	keys->regmap = pmic_chip->regmap;
+	mtk_pmic_regs = of_id->data;
+
+	keys->input_dev = input_dev = devm_input_allocate_device(keys->dev);
+	if (!input_dev) {
+		dev_err(keys->dev, "input allocate device fail.\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "mtk-pmic-keys";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0001;
+
+	keycount = of_get_available_child_count(node);
+	if (keycount > MTK_PMIC_MAX_KEY_COUNT) {
+		dev_err(keys->dev, "too many keys defined (%d)\n", keycount);
+		return -EINVAL;
+	}
+
+	for_each_child_of_node(node, child) {
+		keys->keys[index].regs = &mtk_pmic_regs->keys_regs[index];
+
+		keys->keys[index].irq = platform_get_irq(pdev, index);
+		if (keys->keys[index].irq < 0) {
+			of_node_put(child);
+			return keys->keys[index].irq;
+		}
+
+		error = of_property_read_u32(child,
+			"linux,keycodes", &keys->keys[index].keycode);
+		if (error) {
+			dev_err(keys->dev,
+				"failed to read key:%d linux,keycode property: %d\n",
+				index, error);
+			of_node_put(child);
+			return error;
+		}
+
+		if (of_property_read_bool(child, "wakeup-source"))
+			keys->keys[index].wakeup = true;
+
+		error = mtk_pmic_key_setup(keys, &keys->keys[index]);
+		if (error) {
+			of_node_put(child);
+			return error;
+		}
+
+		index++;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev,
+			"register input device failed (%d)\n", error);
+		return error;
+	}
+
+	mtk_pmic_keys_lp_reset_setup(keys, mtk_pmic_regs->pmic_rst_reg);
+
+	platform_set_drvdata(pdev, keys);
+
+	return 0;
+}
+
+static struct platform_driver pmic_keys_pdrv = {
+	.probe = mtk_pmic_keys_probe,
+	.driver = {
+		   .name = "mtk-pmic-keys",
+		   .of_match_table = of_mtk_pmic_keys_match_tbl,
+		   .pm = &mtk_pmic_keys_pm_ops,
+	},
+};
+
+module_platform_driver(pmic_keys_pdrv);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>");
+MODULE_DESCRIPTION("MTK pmic-keys driver v0.1");
diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c
new file mode 100644
index 000000000..9742261b2
--- /dev/null
+++ b/drivers/input/keyboard/newtonkbd.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 2000 Justin Cormack
+ */
+
+/*
+ * Newton keyboard driver for Linux
+ */
+
+/*
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Newton keyboard driver"
+
+MODULE_AUTHOR("Justin Cormack <j.cormack@doc.ic.ac.uk>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define NKBD_KEY	0x7f
+#define NKBD_PRESS	0x80
+
+static unsigned char nkbd_keycode[128] = {
+	KEY_A, KEY_S, KEY_D, KEY_F, KEY_H, KEY_G, KEY_Z, KEY_X,
+	KEY_C, KEY_V, 0, KEY_B, KEY_Q, KEY_W, KEY_E, KEY_R,
+	KEY_Y, KEY_T, KEY_1, KEY_2, KEY_3, KEY_4, KEY_6, KEY_5,
+	KEY_EQUAL, KEY_9, KEY_7, KEY_MINUS, KEY_8, KEY_0, KEY_RIGHTBRACE, KEY_O,
+	KEY_U, KEY_LEFTBRACE, KEY_I, KEY_P, KEY_ENTER, KEY_L, KEY_J, KEY_APOSTROPHE,
+	KEY_K, KEY_SEMICOLON, KEY_BACKSLASH, KEY_COMMA, KEY_SLASH, KEY_N, KEY_M, KEY_DOT,
+	KEY_TAB, KEY_SPACE, KEY_GRAVE, KEY_DELETE, 0, 0, 0, KEY_LEFTMETA,
+	KEY_LEFTSHIFT, KEY_CAPSLOCK, KEY_LEFTALT, KEY_LEFTCTRL, KEY_RIGHTSHIFT, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	KEY_LEFT, KEY_RIGHT, KEY_DOWN, KEY_UP, 0
+};
+
+struct nkbd {
+	unsigned char keycode[128];
+	struct input_dev *dev;
+	struct serio *serio;
+	char phys[32];
+};
+
+static irqreturn_t nkbd_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct nkbd *nkbd = serio_get_drvdata(serio);
+
+	/* invalid scan codes are probably the init sequence, so we ignore them */
+	if (nkbd->keycode[data & NKBD_KEY]) {
+		input_report_key(nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS);
+		input_sync(nkbd->dev);
+	}
+
+	else if (data == 0xe7) /* end of init sequence */
+		printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys);
+	return IRQ_HANDLED;
+
+}
+
+static int nkbd_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct nkbd *nkbd;
+	struct input_dev *input_dev;
+	int err = -ENOMEM;
+	int i;
+
+	nkbd = kzalloc(sizeof(struct nkbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!nkbd || !input_dev)
+		goto fail1;
+
+	nkbd->serio = serio;
+	nkbd->dev = input_dev;
+	snprintf(nkbd->phys, sizeof(nkbd->phys), "%s/input0", serio->phys);
+	memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode));
+
+	input_dev->name = "Newton Keyboard";
+	input_dev->phys = nkbd->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_NEWTON;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->keycode = nkbd->keycode;
+	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodemax = ARRAY_SIZE(nkbd_keycode);
+	for (i = 0; i < 128; i++)
+		set_bit(nkbd->keycode[i], input_dev->keybit);
+	clear_bit(0, input_dev->keybit);
+
+	serio_set_drvdata(serio, nkbd);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(nkbd->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(nkbd);
+	return err;
+}
+
+static void nkbd_disconnect(struct serio *serio)
+{
+	struct nkbd *nkbd = serio_get_drvdata(serio);
+
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_unregister_device(nkbd->dev);
+	kfree(nkbd);
+}
+
+static const struct serio_device_id nkbd_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_NEWTON,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, nkbd_serio_ids);
+
+static struct serio_driver nkbd_drv = {
+	.driver		= {
+		.name	= "newtonkbd",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= nkbd_serio_ids,
+	.interrupt	= nkbd_interrupt,
+	.connect	= nkbd_connect,
+	.disconnect	= nkbd_disconnect,
+};
+
+module_serio_driver(nkbd_drv);
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
new file mode 100644
index 000000000..608446e14
--- /dev/null
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *
+ * Keypad controller driver for the SKE (Scroll Key Encoder) module used in
+ * the Nomadik 8815 and Ux500 platforms.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+
+#include <linux/platform_data/keypad-nomadik-ske.h>
+
+/* SKE_CR bits */
+#define SKE_KPMLT	(0x1 << 6)
+#define SKE_KPCN	(0x7 << 3)
+#define SKE_KPASEN	(0x1 << 2)
+#define SKE_KPASON	(0x1 << 7)
+
+/* SKE_IMSC bits */
+#define SKE_KPIMA	(0x1 << 2)
+
+/* SKE_ICR bits */
+#define SKE_KPICS	(0x1 << 3)
+#define SKE_KPICA	(0x1 << 2)
+
+/* SKE_RIS bits */
+#define SKE_KPRISA	(0x1 << 2)
+
+#define SKE_KEYPAD_ROW_SHIFT	3
+#define SKE_KPD_NUM_ROWS	8
+#define SKE_KPD_NUM_COLS	8
+
+/* keypad auto scan registers */
+#define SKE_ASR0	0x20
+#define SKE_ASR1	0x24
+#define SKE_ASR2	0x28
+#define SKE_ASR3	0x2C
+
+#define SKE_NUM_ASRX_REGISTERS	(4)
+#define	KEY_PRESSED_DELAY	10
+
+/**
+ * struct ske_keypad  - data structure used by keypad driver
+ * @irq:	irq no
+ * @reg_base:	ske registers base address
+ * @input:	pointer to input device object
+ * @board:	keypad platform device
+ * @keymap:	matrix scan code table for keycodes
+ * @clk:	clock structure pointer
+ */
+struct ske_keypad {
+	int irq;
+	void __iomem *reg_base;
+	struct input_dev *input;
+	const struct ske_keypad_platform_data *board;
+	unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS];
+	struct clk *clk;
+	struct clk *pclk;
+	spinlock_t ske_keypad_lock;
+};
+
+static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr,
+		u8 mask, u8 data)
+{
+	u32 ret;
+
+	spin_lock(&keypad->ske_keypad_lock);
+
+	ret = readl(keypad->reg_base + addr);
+	ret &= ~mask;
+	ret |= data;
+	writel(ret, keypad->reg_base + addr);
+
+	spin_unlock(&keypad->ske_keypad_lock);
+}
+
+/*
+ * ske_keypad_chip_init: init keypad controller configuration
+ *
+ * Enable Multi key press detection, auto scan mode
+ */
+static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
+{
+	u32 value;
+	int timeout = keypad->board->debounce_ms;
+
+	/* check SKE_RIS to be 0 */
+	while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
+		cpu_relax();
+
+	if (timeout == -1)
+		return -EINVAL;
+
+	/*
+	 * set debounce value
+	 * keypad dbounce is configured in DBCR[15:8]
+	 * dbounce value in steps of 32/32.768 ms
+	 */
+	spin_lock(&keypad->ske_keypad_lock);
+	value = readl(keypad->reg_base + SKE_DBCR);
+	value = value & 0xff;
+	value |= ((keypad->board->debounce_ms * 32000)/32768) << 8;
+	writel(value, keypad->reg_base + SKE_DBCR);
+	spin_unlock(&keypad->ske_keypad_lock);
+
+	/* enable multi key detection */
+	ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT);
+
+	/*
+	 * set up the number of columns
+	 * KPCN[5:3] defines no. of keypad columns to be auto scanned
+	 */
+	value = (keypad->board->kcol - 1) << 3;
+	ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value);
+
+	/* clear keypad interrupt for auto(and pending SW) scans */
+	ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS);
+
+	/* un-mask keypad interrupts */
+	ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+	/* enable automatic scan */
+	ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN);
+
+	return 0;
+}
+
+static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col)
+{
+	int row = 0, code, pos;
+	struct input_dev *input = keypad->input;
+	u32 ske_ris;
+	int key_pressed;
+	int num_of_rows;
+
+	/* find out the row */
+	num_of_rows = hweight8(status);
+	do {
+		pos = __ffs(status);
+		row = pos;
+		status &= ~(1 << pos);
+
+		code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
+		ske_ris = readl(keypad->reg_base + SKE_RIS);
+		key_pressed = ske_ris & SKE_KPRISA;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keypad->keymap[code], key_pressed);
+		input_sync(input);
+		num_of_rows--;
+	} while (num_of_rows);
+}
+
+static void ske_keypad_read_data(struct ske_keypad *keypad)
+{
+	u8 status;
+	int col = 0;
+	int ske_asr, i;
+
+	/*
+	 * Read the auto scan registers
+	 *
+	 * Each SKE_ASRx (x=0 to x=3) contains two row values.
+	 * lower byte contains row value for column 2*x,
+	 * upper byte contains row value for column 2*x + 1
+	 */
+	for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) {
+		ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i));
+		if (!ske_asr)
+			continue;
+
+		/* now that ASRx is zero, find out the coloumn x and row y */
+		status = ske_asr & 0xff;
+		if (status) {
+			col = i * 2;
+			ske_keypad_report(keypad, status, col);
+		}
+		status = (ske_asr & 0xff00) >> 8;
+		if (status) {
+			col = (i * 2) + 1;
+			ske_keypad_report(keypad, status, col);
+		}
+	}
+}
+
+static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
+{
+	struct ske_keypad *keypad = dev_id;
+	int timeout = keypad->board->debounce_ms;
+
+	/* disable auto scan interrupt; mask the interrupt generated */
+	ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
+	ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);
+
+	while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout)
+		cpu_relax();
+
+	/* SKEx registers are stable and can be read */
+	ske_keypad_read_data(keypad);
+
+	/* wait until raw interrupt is clear */
+	while ((readl(keypad->reg_base + SKE_RIS)) && --timeout)
+		msleep(KEY_PRESSED_DELAY);
+
+	/* enable auto scan interrupts */
+	ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ske_keypad_probe(struct platform_device *pdev)
+{
+	const struct ske_keypad_platform_data *plat =
+			dev_get_platdata(&pdev->dev);
+	struct ske_keypad *keypad;
+	struct input_dev *input;
+	struct resource *res;
+	int irq;
+	int error;
+
+	if (!plat) {
+		dev_err(&pdev->dev, "invalid keypad platform data\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing platform resources\n");
+		return -EINVAL;
+	}
+
+	keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!keypad || !input) {
+		dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	keypad->irq = irq;
+	keypad->board = plat;
+	keypad->input = input;
+	spin_lock_init(&keypad->ske_keypad_lock);
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	keypad->reg_base = ioremap(res->start, resource_size(res));
+	if (!keypad->reg_base) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		error = -ENXIO;
+		goto err_free_mem_region;
+	}
+
+	keypad->pclk = clk_get(&pdev->dev, "apb_pclk");
+	if (IS_ERR(keypad->pclk)) {
+		dev_err(&pdev->dev, "failed to get pclk\n");
+		error = PTR_ERR(keypad->pclk);
+		goto err_iounmap;
+	}
+
+	keypad->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get clk\n");
+		error = PTR_ERR(keypad->clk);
+		goto err_pclk;
+	}
+
+	input->id.bustype = BUS_HOST;
+	input->name = "ux500-ske-keypad";
+	input->dev.parent = &pdev->dev;
+
+	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+					   SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS,
+					   keypad->keymap, input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		goto err_clk;
+	}
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	if (!plat->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	error = clk_prepare_enable(keypad->pclk);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to prepare/enable pclk\n");
+		goto err_clk;
+	}
+
+	error = clk_prepare_enable(keypad->clk);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to prepare/enable clk\n");
+		goto err_pclk_disable;
+	}
+
+
+	/* go through board initialization helpers */
+	if (keypad->board->init)
+		keypad->board->init();
+
+	error = ske_keypad_chip_init(keypad);
+	if (error) {
+		dev_err(&pdev->dev, "unable to init keypad hardware\n");
+		goto err_clk_disable;
+	}
+
+	error = request_threaded_irq(keypad->irq, NULL, ske_keypad_irq,
+				     IRQF_ONESHOT, "ske-keypad", keypad);
+	if (error) {
+		dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq);
+		goto err_clk_disable;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev,
+				"unable to register input device: %d\n", error);
+		goto err_free_irq;
+	}
+
+	if (plat->wakeup_enable)
+		device_init_wakeup(&pdev->dev, true);
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+err_free_irq:
+	free_irq(keypad->irq, keypad);
+err_clk_disable:
+	clk_disable_unprepare(keypad->clk);
+err_pclk_disable:
+	clk_disable_unprepare(keypad->pclk);
+err_clk:
+	clk_put(keypad->clk);
+err_pclk:
+	clk_put(keypad->pclk);
+err_iounmap:
+	iounmap(keypad->reg_base);
+err_free_mem_region:
+	release_mem_region(res->start, resource_size(res));
+err_free_mem:
+	input_free_device(input);
+	kfree(keypad);
+	return error;
+}
+
+static int ske_keypad_remove(struct platform_device *pdev)
+{
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	free_irq(keypad->irq, keypad);
+
+	input_unregister_device(keypad->input);
+
+	clk_disable_unprepare(keypad->clk);
+	clk_put(keypad->clk);
+
+	if (keypad->board->exit)
+		keypad->board->exit();
+
+	iounmap(keypad->reg_base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ske_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(irq);
+	else
+		ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
+
+	return 0;
+}
+
+static int ske_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(irq);
+	else
+		ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops,
+			 ske_keypad_suspend, ske_keypad_resume);
+
+static struct platform_driver ske_keypad_driver = {
+	.driver = {
+		.name = "nmk-ske-keypad",
+		.pm = &ske_keypad_dev_pm_ops,
+	},
+	.remove = ske_keypad_remove,
+};
+
+module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>");
+MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver");
+MODULE_ALIAS("platform:nomadik-ske-keypad");
diff --git a/drivers/input/keyboard/nspire-keypad.c b/drivers/input/keyboard/nspire-keypad.c
new file mode 100644
index 000000000..e9fa1423f
--- /dev/null
+++ b/drivers/input/keyboard/nspire-keypad.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+#include <linux/input/matrix_keypad.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#define KEYPAD_SCAN_MODE	0x00
+#define KEYPAD_CNTL		0x04
+#define KEYPAD_INT		0x08
+#define KEYPAD_INTMSK		0x0C
+
+#define KEYPAD_DATA		0x10
+#define KEYPAD_GPIO		0x30
+
+#define KEYPAD_UNKNOWN_INT	0x40
+#define KEYPAD_UNKNOWN_INT_STS	0x44
+
+#define KEYPAD_BITMASK_COLS	11
+#define KEYPAD_BITMASK_ROWS	8
+
+struct nspire_keypad {
+	void __iomem *reg_base;
+	u32 int_mask;
+
+	struct input_dev *input;
+	struct clk *clk;
+
+	struct matrix_keymap_data *keymap;
+	int row_shift;
+
+	/* Maximum delay estimated assuming 33MHz APB */
+	u32 scan_interval;	/* In microseconds (~2000us max) */
+	u32 row_delay;		/* In microseconds (~500us max) */
+
+	u16 state[KEYPAD_BITMASK_ROWS];
+
+	bool active_low;
+};
+
+static irqreturn_t nspire_keypad_irq(int irq, void *dev_id)
+{
+	struct nspire_keypad *keypad = dev_id;
+	struct input_dev *input = keypad->input;
+	unsigned short *keymap = input->keycode;
+	unsigned int code;
+	int row, col;
+	u32 int_sts;
+	u16 state[8];
+	u16 bits, changed;
+
+	int_sts = readl(keypad->reg_base + KEYPAD_INT) & keypad->int_mask;
+	if (!int_sts)
+		return IRQ_NONE;
+
+	memcpy_fromio(state, keypad->reg_base + KEYPAD_DATA, sizeof(state));
+
+	for (row = 0; row < KEYPAD_BITMASK_ROWS; row++) {
+		bits = state[row];
+		if (keypad->active_low)
+			bits = ~bits;
+
+		changed = bits ^ keypad->state[row];
+		if (!changed)
+			continue;
+
+		keypad->state[row] = bits;
+
+		for (col = 0; col < KEYPAD_BITMASK_COLS; col++) {
+			if (!(changed & (1U << col)))
+				continue;
+
+			code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+			input_event(input, EV_MSC, MSC_SCAN, code);
+			input_report_key(input, keymap[code],
+					 bits & (1U << col));
+		}
+	}
+
+	input_sync(input);
+
+	writel(0x3, keypad->reg_base + KEYPAD_INT);
+
+	return IRQ_HANDLED;
+}
+
+static int nspire_keypad_open(struct input_dev *input)
+{
+	struct nspire_keypad *keypad = input_get_drvdata(input);
+	unsigned long val = 0, cycles_per_us, delay_cycles, row_delay_cycles;
+	int error;
+
+	error = clk_prepare_enable(keypad->clk);
+	if (error)
+		return error;
+
+	cycles_per_us = (clk_get_rate(keypad->clk) / 1000000);
+	if (cycles_per_us == 0)
+		cycles_per_us = 1;
+
+	delay_cycles = cycles_per_us * keypad->scan_interval;
+	WARN_ON(delay_cycles >= (1 << 16)); /* Overflow */
+	delay_cycles &= 0xffff;
+
+	row_delay_cycles = cycles_per_us * keypad->row_delay;
+	WARN_ON(row_delay_cycles >= (1 << 14)); /* Overflow */
+	row_delay_cycles &= 0x3fff;
+
+	val |= 3 << 0; /* Set scan mode to 3 (continuous scan) */
+	val |= row_delay_cycles << 2; /* Delay between scanning each row */
+	val |= delay_cycles << 16; /* Delay between scans */
+	writel(val, keypad->reg_base + KEYPAD_SCAN_MODE);
+
+	val = (KEYPAD_BITMASK_ROWS & 0xff) | (KEYPAD_BITMASK_COLS & 0xff)<<8;
+	writel(val, keypad->reg_base + KEYPAD_CNTL);
+
+	/* Enable interrupts */
+	keypad->int_mask = 1 << 1;
+	writel(keypad->int_mask, keypad->reg_base + KEYPAD_INTMSK);
+
+	return 0;
+}
+
+static void nspire_keypad_close(struct input_dev *input)
+{
+	struct nspire_keypad *keypad = input_get_drvdata(input);
+
+	/* Disable interrupts */
+	writel(0, keypad->reg_base + KEYPAD_INTMSK);
+	/* Acknowledge existing interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_INT);
+
+	clk_disable_unprepare(keypad->clk);
+}
+
+static int nspire_keypad_probe(struct platform_device *pdev)
+{
+	const struct device_node *of_node = pdev->dev.of_node;
+	struct nspire_keypad *keypad;
+	struct input_dev *input;
+	struct resource *res;
+	int irq;
+	int error;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -EINVAL;
+
+	keypad = devm_kzalloc(&pdev->dev, sizeof(struct nspire_keypad),
+			      GFP_KERNEL);
+	if (!keypad) {
+		dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+		return -ENOMEM;
+	}
+
+	keypad->row_shift = get_count_order(KEYPAD_BITMASK_COLS);
+
+	error = of_property_read_u32(of_node, "scan-interval",
+				     &keypad->scan_interval);
+	if (error) {
+		dev_err(&pdev->dev, "failed to get scan-interval\n");
+		return error;
+	}
+
+	error = of_property_read_u32(of_node, "row-delay",
+				     &keypad->row_delay);
+	if (error) {
+		dev_err(&pdev->dev, "failed to get row-delay\n");
+		return error;
+	}
+
+	keypad->active_low = of_property_read_bool(of_node, "active-low");
+
+	keypad->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "unable to get clock\n");
+		return PTR_ERR(keypad->clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	keypad->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad->reg_base))
+		return PTR_ERR(keypad->reg_base);
+
+	keypad->input = input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	error = clk_prepare_enable(keypad->clk);
+	if (error) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return error;
+	}
+
+	/* Disable interrupts */
+	writel(0, keypad->reg_base + KEYPAD_INTMSK);
+	/* Acknowledge existing interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_INT);
+
+	/* Disable GPIO interrupts to prevent hanging on touchpad */
+	/* Possibly used to detect touchpad events */
+	writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT);
+	/* Acknowledge existing GPIO interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS);
+
+	clk_disable_unprepare(keypad->clk);
+
+	input_set_drvdata(input, keypad);
+
+	input->id.bustype = BUS_HOST;
+	input->name = "nspire-keypad";
+	input->open = nspire_keypad_open;
+	input->close = nspire_keypad_close;
+
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(EV_REP, input->evbit);
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   KEYPAD_BITMASK_ROWS,
+					   KEYPAD_BITMASK_COLS,
+					   NULL, input);
+	if (error) {
+		dev_err(&pdev->dev, "building keymap failed\n");
+		return error;
+	}
+
+	error = devm_request_irq(&pdev->dev, irq, nspire_keypad_irq, 0,
+				 "nspire_keypad", keypad);
+	if (error) {
+		dev_err(&pdev->dev, "allocate irq %d failed\n", irq);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev,
+			"unable to register input device: %d\n", error);
+		return error;
+	}
+
+	dev_dbg(&pdev->dev,
+		"TI-NSPIRE keypad at %pR (scan_interval=%uus, row_delay=%uus%s)\n",
+		res, keypad->row_delay, keypad->scan_interval,
+		keypad->active_low ? ", active_low" : "");
+
+	return 0;
+}
+
+static const struct of_device_id nspire_keypad_dt_match[] = {
+	{ .compatible = "ti,nspire-keypad" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, nspire_keypad_dt_match);
+
+static struct platform_driver nspire_keypad_driver = {
+	.driver = {
+		.name = "nspire-keypad",
+		.of_match_table = nspire_keypad_dt_match,
+	},
+	.probe = nspire_keypad_probe,
+};
+
+module_platform_driver(nspire_keypad_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("TI-NSPIRE Keypad Driver");
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
new file mode 100644
index 000000000..dbe836c7f
--- /dev/null
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * linux/drivers/input/keyboard/omap-keypad.c
+ *
+ * OMAP Keypad Driver
+ *
+ * Copyright (C) 2003 Nokia Corporation
+ * Written by Timo Teräs <ext-timo.teras@nokia.com>
+ *
+ * Added support for H2 & H3 Keypad
+ * Copyright (C) 2004 Texas Instruments
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
+
+#undef NEW_BOARD_LEARNING_MODE
+
+static void omap_kp_tasklet(unsigned long);
+static void omap_kp_timer(struct timer_list *);
+
+static unsigned char keypad_state[8];
+static DEFINE_MUTEX(kp_enable_mutex);
+static int kp_enable = 1;
+static int kp_cur_group = -1;
+
+struct omap_kp {
+	struct input_dev *input;
+	struct timer_list timer;
+	int irq;
+	unsigned int rows;
+	unsigned int cols;
+	unsigned long delay;
+	unsigned int debounce;
+	unsigned short keymap[];
+};
+
+static DECLARE_TASKLET_DISABLED_OLD(kp_tasklet, omap_kp_tasklet);
+
+static unsigned int *row_gpios;
+static unsigned int *col_gpios;
+
+static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
+{
+	/* disable keyboard interrupt and schedule for handling */
+	omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+
+	tasklet_schedule(&kp_tasklet);
+
+	return IRQ_HANDLED;
+}
+
+static void omap_kp_timer(struct timer_list *unused)
+{
+	tasklet_schedule(&kp_tasklet);
+}
+
+static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
+{
+	int col = 0;
+
+	/* disable keyboard interrupt and schedule for handling */
+	omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+
+	/* read the keypad status */
+	omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+	for (col = 0; col < omap_kp->cols; col++) {
+		omap_writew(~(1 << col) & 0xff,
+			    OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+
+		udelay(omap_kp->delay);
+
+		state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
+					 OMAP_MPUIO_KBR_LATCH) & 0xff;
+	}
+	omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+	udelay(2);
+}
+
+static void omap_kp_tasklet(unsigned long data)
+{
+	struct omap_kp *omap_kp_data = (struct omap_kp *) data;
+	unsigned short *keycodes = omap_kp_data->input->keycode;
+	unsigned int row_shift = get_count_order(omap_kp_data->cols);
+	unsigned char new_state[8], changed, key_down = 0;
+	int col, row;
+
+	/* check for any changes */
+	omap_kp_scan_keypad(omap_kp_data, new_state);
+
+	/* check for changes and print those */
+	for (col = 0; col < omap_kp_data->cols; col++) {
+		changed = new_state[col] ^ keypad_state[col];
+		key_down |= new_state[col];
+		if (changed == 0)
+			continue;
+
+		for (row = 0; row < omap_kp_data->rows; row++) {
+			int key;
+			if (!(changed & (1 << row)))
+				continue;
+#ifdef NEW_BOARD_LEARNING_MODE
+			printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col,
+			       row, (new_state[col] & (1 << row)) ?
+			       "pressed" : "released");
+#else
+			key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];
+
+			if (!(kp_cur_group == (key & GROUP_MASK) ||
+			      kp_cur_group == -1))
+				continue;
+
+			kp_cur_group = key & GROUP_MASK;
+			input_report_key(omap_kp_data->input, key & ~GROUP_MASK,
+					 new_state[col] & (1 << row));
+#endif
+		}
+	}
+	input_sync(omap_kp_data->input);
+	memcpy(keypad_state, new_state, sizeof(keypad_state));
+
+	if (key_down) {
+		/* some key is pressed - keep irq disabled and use timer
+		 * to poll the keypad */
+		mod_timer(&omap_kp_data->timer, jiffies + HZ / 20);
+	} else {
+		/* enable interrupts */
+		omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		kp_cur_group = -1;
+	}
+}
+
+static ssize_t omap_kp_enable_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", kp_enable);
+}
+
+static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct omap_kp *omap_kp = dev_get_drvdata(dev);
+	int state;
+
+	if (sscanf(buf, "%u", &state) != 1)
+		return -EINVAL;
+
+	if ((state != 1) && (state != 0))
+		return -EINVAL;
+
+	mutex_lock(&kp_enable_mutex);
+	if (state != kp_enable) {
+		if (state)
+			enable_irq(omap_kp->irq);
+		else
+			disable_irq(omap_kp->irq);
+		kp_enable = state;
+	}
+	mutex_unlock(&kp_enable_mutex);
+
+	return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, omap_kp_enable_show, omap_kp_enable_store);
+
+static int omap_kp_probe(struct platform_device *pdev)
+{
+	struct omap_kp *omap_kp;
+	struct input_dev *input_dev;
+	struct omap_kp_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	int i, col_idx, row_idx, ret;
+	unsigned int row_shift, keycodemax;
+
+	if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
+		printk(KERN_ERR "No rows, cols or keymap_data from pdata\n");
+		return -EINVAL;
+	}
+
+	row_shift = get_count_order(pdata->cols);
+	keycodemax = pdata->rows << row_shift;
+
+	omap_kp = kzalloc(sizeof(struct omap_kp) +
+			keycodemax * sizeof(unsigned short), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!omap_kp || !input_dev) {
+		kfree(omap_kp);
+		input_free_device(input_dev);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, omap_kp);
+
+	omap_kp->input = input_dev;
+
+	/* Disable the interrupt for the MPUIO keyboard */
+	omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+
+	if (pdata->delay)
+		omap_kp->delay = pdata->delay;
+
+	if (pdata->row_gpios && pdata->col_gpios) {
+		row_gpios = pdata->row_gpios;
+		col_gpios = pdata->col_gpios;
+	}
+
+	omap_kp->rows = pdata->rows;
+	omap_kp->cols = pdata->cols;
+
+	col_idx = 0;
+	row_idx = 0;
+
+	timer_setup(&omap_kp->timer, omap_kp_timer, 0);
+
+	/* get the irq and init timer*/
+	kp_tasklet.data = (unsigned long) omap_kp;
+	tasklet_enable(&kp_tasklet);
+
+	ret = device_create_file(&pdev->dev, &dev_attr_enable);
+	if (ret < 0)
+		goto err2;
+
+	/* setup input device */
+	input_dev->name = "omap-keypad";
+	input_dev->phys = "omap-keypad/input0";
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+
+	if (pdata->rep)
+		__set_bit(EV_REP, input_dev->evbit);
+
+	ret = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+					 pdata->rows, pdata->cols,
+					 omap_kp->keymap, input_dev);
+	if (ret < 0)
+		goto err3;
+
+	ret = input_register_device(omap_kp->input);
+	if (ret < 0) {
+		printk(KERN_ERR "Unable to register omap-keypad input device\n");
+		goto err3;
+	}
+
+	if (pdata->dbounce)
+		omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
+
+	/* scan current status and enable interrupt */
+	omap_kp_scan_keypad(omap_kp, keypad_state);
+	omap_kp->irq = platform_get_irq(pdev, 0);
+	if (omap_kp->irq >= 0) {
+		if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
+				"omap-keypad", omap_kp) < 0)
+			goto err4;
+	}
+	omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+
+	return 0;
+
+err4:
+	input_unregister_device(omap_kp->input);
+	input_dev = NULL;
+err3:
+	device_remove_file(&pdev->dev, &dev_attr_enable);
+err2:
+	for (i = row_idx - 1; i >= 0; i--)
+		gpio_free(row_gpios[i]);
+	for (i = col_idx - 1; i >= 0; i--)
+		gpio_free(col_gpios[i]);
+
+	kfree(omap_kp);
+	input_free_device(input_dev);
+
+	return -EINVAL;
+}
+
+static int omap_kp_remove(struct platform_device *pdev)
+{
+	struct omap_kp *omap_kp = platform_get_drvdata(pdev);
+
+	/* disable keypad interrupt handling */
+	tasklet_disable(&kp_tasklet);
+	omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+	free_irq(omap_kp->irq, omap_kp);
+
+	del_timer_sync(&omap_kp->timer);
+	tasklet_kill(&kp_tasklet);
+
+	/* unregister everything */
+	input_unregister_device(omap_kp->input);
+
+	kfree(omap_kp);
+
+	return 0;
+}
+
+static struct platform_driver omap_kp_driver = {
+	.probe		= omap_kp_probe,
+	.remove		= omap_kp_remove,
+	.driver		= {
+		.name	= "omap-keypad",
+	},
+};
+module_platform_driver(omap_kp_driver);
+
+MODULE_AUTHOR("Timo Teräs");
+MODULE_DESCRIPTION("OMAP Keypad Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap-keypad");
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
new file mode 100644
index 000000000..dd16f7b3c
--- /dev/null
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OMAP4 Keypad Driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: Abraham Arce <x0066660@ti.com>
+ * Initial Code: Syed Rafiuddin <rafiuddin.syed@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+/* OMAP4 registers */
+#define OMAP4_KBD_REVISION		0x00
+#define OMAP4_KBD_SYSCONFIG		0x10
+#define OMAP4_KBD_SYSSTATUS		0x14
+#define OMAP4_KBD_IRQSTATUS		0x18
+#define OMAP4_KBD_IRQENABLE		0x1C
+#define OMAP4_KBD_WAKEUPENABLE		0x20
+#define OMAP4_KBD_PENDING		0x24
+#define OMAP4_KBD_CTRL			0x28
+#define OMAP4_KBD_DEBOUNCINGTIME	0x2C
+#define OMAP4_KBD_LONGKEYTIME		0x30
+#define OMAP4_KBD_TIMEOUT		0x34
+#define OMAP4_KBD_STATEMACHINE		0x38
+#define OMAP4_KBD_ROWINPUTS		0x3C
+#define OMAP4_KBD_COLUMNOUTPUTS		0x40
+#define OMAP4_KBD_FULLCODE31_0		0x44
+#define OMAP4_KBD_FULLCODE63_32		0x48
+
+/* OMAP4 bit definitions */
+#define OMAP4_DEF_IRQENABLE_EVENTEN	BIT(0)
+#define OMAP4_DEF_IRQENABLE_LONGKEY	BIT(1)
+#define OMAP4_DEF_WUP_EVENT_ENA		BIT(0)
+#define OMAP4_DEF_WUP_LONG_KEY_ENA	BIT(1)
+#define OMAP4_DEF_CTRL_NOSOFTMODE	BIT(1)
+#define OMAP4_DEF_CTRL_PTV_SHIFT	2
+
+/* OMAP4 values */
+#define OMAP4_VAL_IRQDISABLE		0x0
+
+/*
+ * Errata i689: If a key is released for a time shorter than debounce time,
+ * the keyboard will idle and never detect the key release. The workaround
+ * is to use at least a 12ms debounce time. See omap5432 TRM chapter
+ * "26.4.6.2 Keyboard Controller Timer" for more information.
+ */
+#define OMAP4_KEYPAD_PTV_DIV_128        0x6
+#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv)     \
+	((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1)
+#define OMAP4_VAL_DEBOUNCINGTIME_16MS					\
+	OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128)
+
+enum {
+	KBD_REVISION_OMAP4 = 0,
+	KBD_REVISION_OMAP5,
+};
+
+struct omap4_keypad {
+	struct input_dev *input;
+
+	void __iomem *base;
+	bool irq_wake_enabled;
+	unsigned int irq;
+
+	unsigned int rows;
+	unsigned int cols;
+	u32 reg_offset;
+	u32 irqreg_offset;
+	unsigned int row_shift;
+	bool no_autorepeat;
+	unsigned char key_state[8];
+	unsigned short *keymap;
+};
+
+static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
+{
+	return __raw_readl(keypad_data->base +
+				keypad_data->reg_offset + offset);
+}
+
+static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
+{
+	__raw_writel(value,
+		     keypad_data->base + keypad_data->reg_offset + offset);
+}
+
+static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
+{
+	return __raw_readl(keypad_data->base +
+				keypad_data->irqreg_offset + offset);
+}
+
+static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
+			     u32 offset, u32 value)
+{
+	__raw_writel(value,
+		     keypad_data->base + keypad_data->irqreg_offset + offset);
+}
+
+
+/* Interrupt handlers */
+static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
+{
+	struct omap4_keypad *keypad_data = dev_id;
+
+	if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS))
+		return IRQ_WAKE_THREAD;
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
+{
+	struct omap4_keypad *keypad_data = dev_id;
+	struct input_dev *input_dev = keypad_data->input;
+	unsigned char key_state[ARRAY_SIZE(keypad_data->key_state)];
+	unsigned int col, row, code, changed;
+	u32 *new_state = (u32 *) key_state;
+
+	*new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
+	*(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
+
+	for (row = 0; row < keypad_data->rows; row++) {
+		changed = key_state[row] ^ keypad_data->key_state[row];
+		if (!changed)
+			continue;
+
+		for (col = 0; col < keypad_data->cols; col++) {
+			if (changed & (1 << col)) {
+				code = MATRIX_SCAN_CODE(row, col,
+						keypad_data->row_shift);
+				input_event(input_dev, EV_MSC, MSC_SCAN, code);
+				input_report_key(input_dev,
+						 keypad_data->keymap[code],
+						 key_state[row] & (1 << col));
+			}
+		}
+	}
+
+	input_sync(input_dev);
+
+	memcpy(keypad_data->key_state, key_state,
+		sizeof(keypad_data->key_state));
+
+	/* clear pending interrupts */
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
+
+	return IRQ_HANDLED;
+}
+
+static int omap4_keypad_open(struct input_dev *input)
+{
+	struct omap4_keypad *keypad_data = input_get_drvdata(input);
+
+	pm_runtime_get_sync(input->dev.parent);
+
+	disable_irq(keypad_data->irq);
+
+	kbd_writel(keypad_data, OMAP4_KBD_CTRL,
+			OMAP4_DEF_CTRL_NOSOFTMODE |
+			(OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT));
+	kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
+			OMAP4_VAL_DEBOUNCINGTIME_16MS);
+	/* clear pending interrupts */
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+			OMAP4_DEF_IRQENABLE_EVENTEN |
+				OMAP4_DEF_IRQENABLE_LONGKEY);
+	kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
+			OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
+
+	enable_irq(keypad_data->irq);
+
+	return 0;
+}
+
+static void omap4_keypad_stop(struct omap4_keypad *keypad_data)
+{
+	/* Disable interrupts and wake-up events */
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+			 OMAP4_VAL_IRQDISABLE);
+	kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, 0);
+
+	/* clear pending interrupts */
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
+}
+
+static void omap4_keypad_close(struct input_dev *input)
+{
+	struct omap4_keypad *keypad_data;
+
+	keypad_data = input_get_drvdata(input);
+	disable_irq(keypad_data->irq);
+	omap4_keypad_stop(keypad_data);
+	enable_irq(keypad_data->irq);
+
+	pm_runtime_put_sync(input->dev.parent);
+}
+
+static int omap4_keypad_parse_dt(struct device *dev,
+				 struct omap4_keypad *keypad_data)
+{
+	struct device_node *np = dev->of_node;
+	int err;
+
+	err = matrix_keypad_parse_properties(dev, &keypad_data->rows,
+					     &keypad_data->cols);
+	if (err)
+		return err;
+
+	if (of_get_property(np, "linux,input-no-autorepeat", NULL))
+		keypad_data->no_autorepeat = true;
+
+	return 0;
+}
+
+static int omap4_keypad_check_revision(struct device *dev,
+				       struct omap4_keypad *keypad_data)
+{
+	unsigned int rev;
+
+	rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
+	rev &= 0x03 << 30;
+	rev >>= 30;
+	switch (rev) {
+	case KBD_REVISION_OMAP4:
+		keypad_data->reg_offset = 0x00;
+		keypad_data->irqreg_offset = 0x00;
+		break;
+	case KBD_REVISION_OMAP5:
+		keypad_data->reg_offset = 0x10;
+		keypad_data->irqreg_offset = 0x0c;
+		break;
+	default:
+		dev_err(dev, "Keypad reports unsupported revision %d", rev);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int omap4_keypad_probe(struct platform_device *pdev)
+{
+	struct omap4_keypad *keypad_data;
+	struct input_dev *input_dev;
+	struct resource *res;
+	unsigned int max_keys;
+	int irq;
+	int error;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no base address specified\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
+	if (!keypad_data) {
+		dev_err(&pdev->dev, "keypad_data memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	keypad_data->irq = irq;
+
+	error = omap4_keypad_parse_dt(&pdev->dev, keypad_data);
+	if (error)
+		goto err_free_keypad;
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (!res) {
+		dev_err(&pdev->dev, "can't request mem region\n");
+		error = -EBUSY;
+		goto err_free_keypad;
+	}
+
+	keypad_data->base = ioremap(res->start, resource_size(res));
+	if (!keypad_data->base) {
+		dev_err(&pdev->dev, "can't ioremap mem resource\n");
+		error = -ENOMEM;
+		goto err_release_mem;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+
+	/*
+	 * Enable clocks for the keypad module so that we can read
+	 * revision register.
+	 */
+	error = pm_runtime_get_sync(&pdev->dev);
+	if (error) {
+		dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
+		pm_runtime_put_noidle(&pdev->dev);
+	} else {
+		error = omap4_keypad_check_revision(&pdev->dev,
+						    keypad_data);
+		if (!error) {
+			/* Ensure device does not raise interrupts */
+			omap4_keypad_stop(keypad_data);
+		}
+		pm_runtime_put_sync(&pdev->dev);
+	}
+	if (error)
+		goto err_pm_disable;
+
+	/* input device allocation */
+	keypad_data->input = input_dev = input_allocate_device();
+	if (!input_dev) {
+		error = -ENOMEM;
+		goto err_pm_disable;
+	}
+
+	input_dev->name = pdev->name;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0001;
+
+	input_dev->open = omap4_keypad_open;
+	input_dev->close = omap4_keypad_close;
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	if (!keypad_data->no_autorepeat)
+		__set_bit(EV_REP, input_dev->evbit);
+
+	input_set_drvdata(input_dev, keypad_data);
+
+	keypad_data->row_shift = get_count_order(keypad_data->cols);
+	max_keys = keypad_data->rows << keypad_data->row_shift;
+	keypad_data->keymap = kcalloc(max_keys,
+				      sizeof(keypad_data->keymap[0]),
+				      GFP_KERNEL);
+	if (!keypad_data->keymap) {
+		dev_err(&pdev->dev, "Not enough memory for keymap\n");
+		error = -ENOMEM;
+		goto err_free_input;
+	}
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   keypad_data->rows, keypad_data->cols,
+					   keypad_data->keymap, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_free_keymap;
+	}
+
+	error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler,
+				     omap4_keypad_irq_thread_fn, IRQF_ONESHOT,
+				     "omap4-keypad", keypad_data);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register interrupt\n");
+		goto err_free_keymap;
+	}
+
+	error = input_register_device(keypad_data->input);
+	if (error < 0) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto err_free_irq;
+	}
+
+	device_init_wakeup(&pdev->dev, true);
+	platform_set_drvdata(pdev, keypad_data);
+
+	return 0;
+
+err_free_irq:
+	free_irq(keypad_data->irq, keypad_data);
+err_free_keymap:
+	kfree(keypad_data->keymap);
+err_free_input:
+	input_free_device(input_dev);
+err_pm_disable:
+	pm_runtime_disable(&pdev->dev);
+	iounmap(keypad_data->base);
+err_release_mem:
+	release_mem_region(res->start, resource_size(res));
+err_free_keypad:
+	kfree(keypad_data);
+	return error;
+}
+
+static int omap4_keypad_remove(struct platform_device *pdev)
+{
+	struct omap4_keypad *keypad_data = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	free_irq(keypad_data->irq, keypad_data);
+
+	pm_runtime_disable(&pdev->dev);
+
+	input_unregister_device(keypad_data->input);
+
+	iounmap(keypad_data->base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(keypad_data->keymap);
+	kfree(keypad_data);
+
+	return 0;
+}
+
+static const struct of_device_id omap_keypad_dt_match[] = {
+	{ .compatible = "ti,omap4-keypad" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_keypad_dt_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int omap4_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap4_keypad *keypad_data = platform_get_drvdata(pdev);
+	int error;
+
+	if (device_may_wakeup(&pdev->dev)) {
+		error = enable_irq_wake(keypad_data->irq);
+		if (!error)
+			keypad_data->irq_wake_enabled = true;
+	}
+
+	return 0;
+}
+
+static int omap4_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap4_keypad *keypad_data = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev) && keypad_data->irq_wake_enabled) {
+		disable_irq_wake(keypad_data->irq);
+		keypad_data->irq_wake_enabled = false;
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(omap4_keypad_pm_ops,
+			 omap4_keypad_suspend, omap4_keypad_resume);
+
+static struct platform_driver omap4_keypad_driver = {
+	.probe		= omap4_keypad_probe,
+	.remove		= omap4_keypad_remove,
+	.driver		= {
+		.name	= "omap4-keypad",
+		.pm	= &omap4_keypad_pm_ops,
+		.of_match_table = omap_keypad_dt_match,
+	},
+};
+module_platform_driver(omap4_keypad_driver);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("OMAP4 Keypad Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap4-keypad");
diff --git a/drivers/input/keyboard/opencores-kbd.c b/drivers/input/keyboard/opencores-kbd.c
new file mode 100644
index 000000000..b0ea38741
--- /dev/null
+++ b/drivers/input/keyboard/opencores-kbd.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenCores Keyboard Controller Driver
+ * http://www.opencores.org/project,keyboardcontroller
+ *
+ * Copyright 2007-2009 HV Sistemas S.L.
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct opencores_kbd {
+	struct input_dev *input;
+	void __iomem *addr;
+	int irq;
+	unsigned short keycodes[128];
+};
+
+static irqreturn_t opencores_kbd_isr(int irq, void *dev_id)
+{
+	struct opencores_kbd *opencores_kbd = dev_id;
+	struct input_dev *input = opencores_kbd->input;
+	unsigned char c;
+
+	c = readb(opencores_kbd->addr);
+	input_report_key(input, c & 0x7f, c & 0x80 ? 0 : 1);
+	input_sync(input);
+
+	return IRQ_HANDLED;
+}
+
+static int opencores_kbd_probe(struct platform_device *pdev)
+{
+	struct input_dev *input;
+	struct opencores_kbd *opencores_kbd;
+	struct resource *res;
+	int irq, i, error;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing board memory resource\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -EINVAL;
+
+	opencores_kbd = devm_kzalloc(&pdev->dev, sizeof(*opencores_kbd),
+				     GFP_KERNEL);
+	if (!opencores_kbd)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	opencores_kbd->input = input;
+
+	opencores_kbd->addr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(opencores_kbd->addr))
+		return PTR_ERR(opencores_kbd->addr);
+
+	input->name = pdev->name;
+	input->phys = "opencores-kbd/input0";
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	input->keycode = opencores_kbd->keycodes;
+	input->keycodesize = sizeof(opencores_kbd->keycodes[0]);
+	input->keycodemax = ARRAY_SIZE(opencores_kbd->keycodes);
+
+	__set_bit(EV_KEY, input->evbit);
+
+	for (i = 0; i < ARRAY_SIZE(opencores_kbd->keycodes); i++) {
+		/*
+		 * OpenCores controller happens to have scancodes match
+		 * our KEY_* definitions.
+		 */
+		opencores_kbd->keycodes[i] = i;
+		__set_bit(opencores_kbd->keycodes[i], input->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	error = devm_request_irq(&pdev->dev, irq, &opencores_kbd_isr,
+				 IRQF_TRIGGER_RISING,
+				 pdev->name, opencores_kbd);
+	if (error) {
+		dev_err(&pdev->dev, "unable to claim irq %d\n", irq);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "unable to register input device\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static struct platform_driver opencores_kbd_device_driver = {
+	.probe    = opencores_kbd_probe,
+	.driver   = {
+		.name = "opencores-kbd",
+	},
+};
+module_platform_driver(opencores_kbd_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Javier Herrero <jherrero@hvsistemas.es>");
+MODULE_DESCRIPTION("Keyboard driver for OpenCores Keyboard Controller");
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
new file mode 100644
index 000000000..91d5811d6
--- /dev/null
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -0,0 +1,689 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/input/matrix_keypad.h>
+
+#define PM8XXX_MAX_ROWS		18
+#define PM8XXX_MAX_COLS		8
+#define PM8XXX_ROW_SHIFT	3
+#define PM8XXX_MATRIX_MAX_SIZE	(PM8XXX_MAX_ROWS * PM8XXX_MAX_COLS)
+
+#define PM8XXX_MIN_ROWS		5
+#define PM8XXX_MIN_COLS		5
+
+#define MAX_SCAN_DELAY		128
+#define MIN_SCAN_DELAY		1
+
+/* in nanoseconds */
+#define MAX_ROW_HOLD_DELAY	122000
+#define MIN_ROW_HOLD_DELAY	30500
+
+#define MAX_DEBOUNCE_TIME	20
+#define MIN_DEBOUNCE_TIME	5
+
+#define KEYP_CTRL			0x148
+
+#define KEYP_CTRL_EVNTS			BIT(0)
+#define KEYP_CTRL_EVNTS_MASK		0x3
+
+#define KEYP_CTRL_SCAN_COLS_SHIFT	5
+#define KEYP_CTRL_SCAN_COLS_MIN		5
+#define KEYP_CTRL_SCAN_COLS_BITS	0x3
+
+#define KEYP_CTRL_SCAN_ROWS_SHIFT	2
+#define KEYP_CTRL_SCAN_ROWS_MIN		5
+#define KEYP_CTRL_SCAN_ROWS_BITS	0x7
+
+#define KEYP_CTRL_KEYP_EN		BIT(7)
+
+#define KEYP_SCAN			0x149
+
+#define KEYP_SCAN_READ_STATE		BIT(0)
+#define KEYP_SCAN_DBOUNCE_SHIFT		1
+#define KEYP_SCAN_PAUSE_SHIFT		3
+#define KEYP_SCAN_ROW_HOLD_SHIFT	6
+
+#define KEYP_TEST			0x14A
+
+#define KEYP_TEST_CLEAR_RECENT_SCAN	BIT(6)
+#define KEYP_TEST_CLEAR_OLD_SCAN	BIT(5)
+#define KEYP_TEST_READ_RESET		BIT(4)
+#define KEYP_TEST_DTEST_EN		BIT(3)
+#define KEYP_TEST_ABORT_READ		BIT(0)
+
+#define KEYP_TEST_DBG_SELECT_SHIFT	1
+
+/* bits of these registers represent
+ * '0' for key press
+ * '1' for key release
+ */
+#define KEYP_RECENT_DATA		0x14B
+#define KEYP_OLD_DATA			0x14C
+
+#define KEYP_CLOCK_FREQ			32768
+
+/**
+ * struct pmic8xxx_kp - internal keypad data structure
+ * @num_cols - number of columns of keypad
+ * @num_rows - number of row of keypad
+ * @input - input device pointer for keypad
+ * @regmap - regmap handle
+ * @key_sense_irq - key press/release irq number
+ * @key_stuck_irq - key stuck notification irq number
+ * @keycodes - array to hold the key codes
+ * @dev - parent device pointer
+ * @keystate - present key press/release state
+ * @stuckstate - present state when key stuck irq
+ * @ctrl_reg - control register value
+ */
+struct pmic8xxx_kp {
+	unsigned int num_rows;
+	unsigned int num_cols;
+	struct input_dev *input;
+	struct regmap *regmap;
+	int key_sense_irq;
+	int key_stuck_irq;
+
+	unsigned short keycodes[PM8XXX_MATRIX_MAX_SIZE];
+
+	struct device *dev;
+	u16 keystate[PM8XXX_MAX_ROWS];
+	u16 stuckstate[PM8XXX_MAX_ROWS];
+
+	u8 ctrl_reg;
+};
+
+static u8 pmic8xxx_col_state(struct pmic8xxx_kp *kp, u8 col)
+{
+	/* all keys pressed on that particular row? */
+	if (col == 0x00)
+		return 1 << kp->num_cols;
+	else
+		return col & ((1 << kp->num_cols) - 1);
+}
+
+/*
+ * Synchronous read protocol for RevB0 onwards:
+ *
+ * 1. Write '1' to ReadState bit in KEYP_SCAN register
+ * 2. Wait 2*32KHz clocks, so that HW can successfully enter read mode
+ *    synchronously
+ * 3. Read rows in old array first if events are more than one
+ * 4. Read rows in recent array
+ * 5. Wait 4*32KHz clocks
+ * 6. Write '0' to ReadState bit of KEYP_SCAN register so that hw can
+ *    synchronously exit read mode.
+ */
+static int pmic8xxx_chk_sync_read(struct pmic8xxx_kp *kp)
+{
+	int rc;
+	unsigned int scan_val;
+
+	rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val);
+	if (rc < 0) {
+		dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc);
+		return rc;
+	}
+
+	scan_val |= 0x1;
+
+	rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val);
+	if (rc < 0) {
+		dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc);
+		return rc;
+	}
+
+	/* 2 * 32KHz clocks */
+	udelay((2 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1);
+
+	return rc;
+}
+
+static int pmic8xxx_kp_read_data(struct pmic8xxx_kp *kp, u16 *state,
+					u16 data_reg, int read_rows)
+{
+	int rc, row;
+	unsigned int val;
+
+	for (row = 0; row < read_rows; row++) {
+		rc = regmap_read(kp->regmap, data_reg, &val);
+		if (rc)
+			return rc;
+		dev_dbg(kp->dev, "%d = %d\n", row, val);
+		state[row] = pmic8xxx_col_state(kp, val);
+	}
+
+	return 0;
+}
+
+static int pmic8xxx_kp_read_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
+					 u16 *old_state)
+{
+	int rc, read_rows;
+	unsigned int scan_val;
+
+	if (kp->num_rows < PM8XXX_MIN_ROWS)
+		read_rows = PM8XXX_MIN_ROWS;
+	else
+		read_rows = kp->num_rows;
+
+	pmic8xxx_chk_sync_read(kp);
+
+	if (old_state) {
+		rc = pmic8xxx_kp_read_data(kp, old_state, KEYP_OLD_DATA,
+						read_rows);
+		if (rc < 0) {
+			dev_err(kp->dev,
+				"Error reading KEYP_OLD_DATA, rc=%d\n", rc);
+			return rc;
+		}
+	}
+
+	rc = pmic8xxx_kp_read_data(kp, new_state, KEYP_RECENT_DATA,
+					 read_rows);
+	if (rc < 0) {
+		dev_err(kp->dev,
+			"Error reading KEYP_RECENT_DATA, rc=%d\n", rc);
+		return rc;
+	}
+
+	/* 4 * 32KHz clocks */
+	udelay((4 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1);
+
+	rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val);
+	if (rc < 0) {
+		dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc);
+		return rc;
+	}
+
+	scan_val &= 0xFE;
+	rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val);
+	if (rc < 0)
+		dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc);
+
+	return rc;
+}
+
+static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
+					 u16 *old_state)
+{
+	int row, col, code;
+
+	for (row = 0; row < kp->num_rows; row++) {
+		int bits_changed = new_state[row] ^ old_state[row];
+
+		if (!bits_changed)
+			continue;
+
+		for (col = 0; col < kp->num_cols; col++) {
+			if (!(bits_changed & (1 << col)))
+				continue;
+
+			dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
+					!(new_state[row] & (1 << col)) ?
+					"pressed" : "released");
+
+			code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);
+
+			input_event(kp->input, EV_MSC, MSC_SCAN, code);
+			input_report_key(kp->input,
+					kp->keycodes[code],
+					!(new_state[row] & (1 << col)));
+
+			input_sync(kp->input);
+		}
+	}
+}
+
+static bool pmic8xxx_detect_ghost_keys(struct pmic8xxx_kp *kp, u16 *new_state)
+{
+	int row, found_first = -1;
+	u16 check, row_state;
+
+	check = 0;
+	for (row = 0; row < kp->num_rows; row++) {
+		row_state = (~new_state[row]) &
+				 ((1 << kp->num_cols) - 1);
+
+		if (hweight16(row_state) > 1) {
+			if (found_first == -1)
+				found_first = row;
+			if (check & row_state) {
+				dev_dbg(kp->dev, "detected ghost key on row[%d]"
+					 " and row[%d]\n", found_first, row);
+				return true;
+			}
+		}
+		check |= row_state;
+	}
+	return false;
+}
+
+static int pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, unsigned int events)
+{
+	u16 new_state[PM8XXX_MAX_ROWS];
+	u16 old_state[PM8XXX_MAX_ROWS];
+	int rc;
+
+	switch (events) {
+	case 0x1:
+		rc = pmic8xxx_kp_read_matrix(kp, new_state, NULL);
+		if (rc < 0)
+			return rc;
+
+		/* detecting ghost key is not an error */
+		if (pmic8xxx_detect_ghost_keys(kp, new_state))
+			return 0;
+		__pmic8xxx_kp_scan_matrix(kp, new_state, kp->keystate);
+		memcpy(kp->keystate, new_state, sizeof(new_state));
+	break;
+	case 0x3: /* two events - eventcounter is gray-coded */
+		rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state);
+		if (rc < 0)
+			return rc;
+
+		__pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate);
+		__pmic8xxx_kp_scan_matrix(kp, new_state, old_state);
+		memcpy(kp->keystate, new_state, sizeof(new_state));
+	break;
+	case 0x2:
+		dev_dbg(kp->dev, "Some key events were lost\n");
+		rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state);
+		if (rc < 0)
+			return rc;
+		__pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate);
+		__pmic8xxx_kp_scan_matrix(kp, new_state, old_state);
+		memcpy(kp->keystate, new_state, sizeof(new_state));
+	break;
+	default:
+		rc = -EINVAL;
+	}
+	return rc;
+}
+
+/*
+ * NOTE: We are reading recent and old data registers blindly
+ * whenever key-stuck interrupt happens, because events counter doesn't
+ * get updated when this interrupt happens due to key stuck doesn't get
+ * considered as key state change.
+ *
+ * We are not using old data register contents after they are being read
+ * because it might report the key which was pressed before the key being stuck
+ * as stuck key because it's pressed status is stored in the old data
+ * register.
+ */
+static irqreturn_t pmic8xxx_kp_stuck_irq(int irq, void *data)
+{
+	u16 new_state[PM8XXX_MAX_ROWS];
+	u16 old_state[PM8XXX_MAX_ROWS];
+	int rc;
+	struct pmic8xxx_kp *kp = data;
+
+	rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state);
+	if (rc < 0) {
+		dev_err(kp->dev, "failed to read keypad matrix\n");
+		return IRQ_HANDLED;
+	}
+
+	__pmic8xxx_kp_scan_matrix(kp, new_state, kp->stuckstate);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pmic8xxx_kp_irq(int irq, void *data)
+{
+	struct pmic8xxx_kp *kp = data;
+	unsigned int ctrl_val, events;
+	int rc;
+
+	rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val);
+	if (rc < 0) {
+		dev_err(kp->dev, "failed to read keyp_ctrl register\n");
+		return IRQ_HANDLED;
+	}
+
+	events = ctrl_val & KEYP_CTRL_EVNTS_MASK;
+
+	rc = pmic8xxx_kp_scan_matrix(kp, events);
+	if (rc < 0)
+		dev_err(kp->dev, "failed to scan matrix\n");
+
+	return IRQ_HANDLED;
+}
+
+static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp,
+			     struct platform_device *pdev)
+{
+	const struct device_node *of_node = pdev->dev.of_node;
+	unsigned int scan_delay_ms;
+	unsigned int row_hold_ns;
+	unsigned int debounce_ms;
+	int bits, rc, cycles;
+	u8 scan_val = 0, ctrl_val = 0;
+	static const u8 row_bits[] = {
+		0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7,
+	};
+
+	/* Find column bits */
+	if (kp->num_cols < KEYP_CTRL_SCAN_COLS_MIN)
+		bits = 0;
+	else
+		bits = kp->num_cols - KEYP_CTRL_SCAN_COLS_MIN;
+	ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) <<
+		KEYP_CTRL_SCAN_COLS_SHIFT;
+
+	/* Find row bits */
+	if (kp->num_rows < KEYP_CTRL_SCAN_ROWS_MIN)
+		bits = 0;
+	else
+		bits = row_bits[kp->num_rows - KEYP_CTRL_SCAN_ROWS_MIN];
+
+	ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT);
+
+	rc = regmap_write(kp->regmap, KEYP_CTRL, ctrl_val);
+	if (rc < 0) {
+		dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc);
+		return rc;
+	}
+
+	if (of_property_read_u32(of_node, "scan-delay", &scan_delay_ms))
+		scan_delay_ms = MIN_SCAN_DELAY;
+
+	if (scan_delay_ms > MAX_SCAN_DELAY || scan_delay_ms < MIN_SCAN_DELAY ||
+	    !is_power_of_2(scan_delay_ms)) {
+		dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(of_node, "row-hold", &row_hold_ns))
+		row_hold_ns = MIN_ROW_HOLD_DELAY;
+
+	if (row_hold_ns > MAX_ROW_HOLD_DELAY ||
+	    row_hold_ns < MIN_ROW_HOLD_DELAY ||
+	    ((row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
+		dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(of_node, "debounce", &debounce_ms))
+		debounce_ms = MIN_DEBOUNCE_TIME;
+
+	if (((debounce_ms % 5) != 0) ||
+	    debounce_ms > MAX_DEBOUNCE_TIME ||
+	    debounce_ms < MIN_DEBOUNCE_TIME) {
+		dev_err(&pdev->dev, "invalid debounce time supplied\n");
+		return -EINVAL;
+	}
+
+	bits = (debounce_ms / 5) - 1;
+
+	scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT);
+
+	bits = fls(scan_delay_ms) - 1;
+	scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT);
+
+	/* Row hold time is a multiple of 32KHz cycles. */
+	cycles = (row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC;
+
+	scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT);
+
+	rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val);
+	if (rc)
+		dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc);
+
+	return rc;
+
+}
+
+static int pmic8xxx_kp_enable(struct pmic8xxx_kp *kp)
+{
+	int rc;
+
+	kp->ctrl_reg |= KEYP_CTRL_KEYP_EN;
+
+	rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg);
+	if (rc < 0)
+		dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc);
+
+	return rc;
+}
+
+static int pmic8xxx_kp_disable(struct pmic8xxx_kp *kp)
+{
+	int rc;
+
+	kp->ctrl_reg &= ~KEYP_CTRL_KEYP_EN;
+
+	rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg);
+	if (rc < 0)
+		return rc;
+
+	return rc;
+}
+
+static int pmic8xxx_kp_open(struct input_dev *dev)
+{
+	struct pmic8xxx_kp *kp = input_get_drvdata(dev);
+
+	return pmic8xxx_kp_enable(kp);
+}
+
+static void pmic8xxx_kp_close(struct input_dev *dev)
+{
+	struct pmic8xxx_kp *kp = input_get_drvdata(dev);
+
+	pmic8xxx_kp_disable(kp);
+}
+
+/*
+ * keypad controller should be initialized in the following sequence
+ * only, otherwise it might get into FSM stuck state.
+ *
+ * - Initialize keypad control parameters, like no. of rows, columns,
+ *   timing values etc.,
+ * - configure rows and column gpios pull up/down.
+ * - set irq edge type.
+ * - enable the keypad controller.
+ */
+static int pmic8xxx_kp_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	unsigned int rows, cols;
+	bool repeat;
+	bool wakeup;
+	struct pmic8xxx_kp *kp;
+	int rc;
+	unsigned int ctrl_val;
+
+	rc = matrix_keypad_parse_properties(&pdev->dev, &rows, &cols);
+	if (rc)
+		return rc;
+
+	if (cols > PM8XXX_MAX_COLS || rows > PM8XXX_MAX_ROWS ||
+	    cols < PM8XXX_MIN_COLS) {
+		dev_err(&pdev->dev, "invalid platform data\n");
+		return -EINVAL;
+	}
+
+	repeat = !of_property_read_bool(np, "linux,input-no-autorepeat");
+
+	wakeup = of_property_read_bool(np, "wakeup-source") ||
+		 /* legacy name */
+		 of_property_read_bool(np, "linux,keypad-wakeup");
+
+	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+	if (!kp)
+		return -ENOMEM;
+
+	kp->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!kp->regmap)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, kp);
+
+	kp->num_rows	= rows;
+	kp->num_cols	= cols;
+	kp->dev		= &pdev->dev;
+
+	kp->input = devm_input_allocate_device(&pdev->dev);
+	if (!kp->input) {
+		dev_err(&pdev->dev, "unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	kp->key_sense_irq = platform_get_irq(pdev, 0);
+	if (kp->key_sense_irq < 0)
+		return kp->key_sense_irq;
+
+	kp->key_stuck_irq = platform_get_irq(pdev, 1);
+	if (kp->key_stuck_irq < 0)
+		return kp->key_stuck_irq;
+
+	kp->input->name = "PMIC8XXX keypad";
+	kp->input->phys = "pmic8xxx_keypad/input0";
+
+	kp->input->id.bustype	= BUS_I2C;
+	kp->input->id.version	= 0x0001;
+	kp->input->id.product	= 0x0001;
+	kp->input->id.vendor	= 0x0001;
+
+	kp->input->open		= pmic8xxx_kp_open;
+	kp->input->close	= pmic8xxx_kp_close;
+
+	rc = matrix_keypad_build_keymap(NULL, NULL,
+					PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS,
+					kp->keycodes, kp->input);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		return rc;
+	}
+
+	if (repeat)
+		__set_bit(EV_REP, kp->input->evbit);
+	input_set_capability(kp->input, EV_MSC, MSC_SCAN);
+
+	input_set_drvdata(kp->input, kp);
+
+	/* initialize keypad state */
+	memset(kp->keystate, 0xff, sizeof(kp->keystate));
+	memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));
+
+	rc = pmic8xxx_kpd_init(kp, pdev);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "unable to initialize keypad controller\n");
+		return rc;
+	}
+
+	rc = devm_request_any_context_irq(&pdev->dev, kp->key_sense_irq,
+			pmic8xxx_kp_irq, IRQF_TRIGGER_RISING, "pmic-keypad",
+			kp);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "failed to request keypad sense irq\n");
+		return rc;
+	}
+
+	rc = devm_request_any_context_irq(&pdev->dev, kp->key_stuck_irq,
+			pmic8xxx_kp_stuck_irq, IRQF_TRIGGER_RISING,
+			"pmic-keypad-stuck", kp);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
+		return rc;
+	}
+
+	rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n");
+		return rc;
+	}
+
+	kp->ctrl_reg = ctrl_val;
+
+	rc = input_register_device(kp->input);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "unable to register keypad input device\n");
+		return rc;
+	}
+
+	device_init_wakeup(&pdev->dev, wakeup);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pmic8xxx_kp_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kp->input;
+
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(kp->key_sense_irq);
+	} else {
+		mutex_lock(&input_dev->mutex);
+
+		if (input_dev->users)
+			pmic8xxx_kp_disable(kp);
+
+		mutex_unlock(&input_dev->mutex);
+	}
+
+	return 0;
+}
+
+static int pmic8xxx_kp_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kp->input;
+
+	if (device_may_wakeup(dev)) {
+		disable_irq_wake(kp->key_sense_irq);
+	} else {
+		mutex_lock(&input_dev->mutex);
+
+		if (input_dev->users)
+			pmic8xxx_kp_enable(kp);
+
+		mutex_unlock(&input_dev->mutex);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops,
+			 pmic8xxx_kp_suspend, pmic8xxx_kp_resume);
+
+static const struct of_device_id pm8xxx_match_table[] = {
+	{ .compatible = "qcom,pm8058-keypad" },
+	{ .compatible = "qcom,pm8921-keypad" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8xxx_match_table);
+
+static struct platform_driver pmic8xxx_kp_driver = {
+	.probe		= pmic8xxx_kp_probe,
+	.driver		= {
+		.name = "pm8xxx-keypad",
+		.pm = &pm8xxx_kp_pm_ops,
+		.of_match_table = pm8xxx_match_table,
+	},
+};
+module_platform_driver(pmic8xxx_kp_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PMIC8XXX keypad driver");
+MODULE_ALIAS("platform:pmic8xxx_keypad");
+MODULE_AUTHOR("Trilok Soni <tsoni@codeaurora.org>");
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
new file mode 100644
index 000000000..7e65708b2
--- /dev/null
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -0,0 +1,841 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/input/keyboard/pxa27x_keypad.c
+ *
+ * Driver for the pxa27x matrix keyboard controller.
+ *
+ * Created:	Feb 22, 2007
+ * Author:	Rodolfo Giometti <giometti@linux.it>
+ *
+ * Based on a previous implementations by Kevin O'Connor
+ * <kevin_at_koconnor.net> and Alex Osborne <bobofdoom@gmail.com> and
+ * on some suggestions by Nicolas Pitre <nico@fluxnic.net>.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <linux/platform_data/keypad-pxa27x.h>
+/*
+ * Keypad Controller registers
+ */
+#define KPC             0x0000 /* Keypad Control register */
+#define KPDK            0x0008 /* Keypad Direct Key register */
+#define KPREC           0x0010 /* Keypad Rotary Encoder register */
+#define KPMK            0x0018 /* Keypad Matrix Key register */
+#define KPAS            0x0020 /* Keypad Automatic Scan register */
+
+/* Keypad Automatic Scan Multiple Key Presser register 0-3 */
+#define KPASMKP0        0x0028
+#define KPASMKP1        0x0030
+#define KPASMKP2        0x0038
+#define KPASMKP3        0x0040
+#define KPKDI           0x0048
+
+/* bit definitions */
+#define KPC_MKRN(n)	((((n) - 1) & 0x7) << 26) /* matrix key row number */
+#define KPC_MKCN(n)	((((n) - 1) & 0x7) << 23) /* matrix key column number */
+#define KPC_DKN(n)	((((n) - 1) & 0x7) << 6)  /* direct key number */
+
+#define KPC_AS          (0x1 << 30)  /* Automatic Scan bit */
+#define KPC_ASACT       (0x1 << 29)  /* Automatic Scan on Activity */
+#define KPC_MI          (0x1 << 22)  /* Matrix interrupt bit */
+#define KPC_IMKP        (0x1 << 21)  /* Ignore Multiple Key Press */
+
+#define KPC_MS(n)	(0x1 << (13 + (n)))	/* Matrix scan line 'n' */
+#define KPC_MS_ALL      (0xff << 13)
+
+#define KPC_ME          (0x1 << 12)  /* Matrix Keypad Enable */
+#define KPC_MIE         (0x1 << 11)  /* Matrix Interrupt Enable */
+#define KPC_DK_DEB_SEL	(0x1 <<  9)  /* Direct Keypad Debounce Select */
+#define KPC_DI          (0x1 <<  5)  /* Direct key interrupt bit */
+#define KPC_RE_ZERO_DEB (0x1 <<  4)  /* Rotary Encoder Zero Debounce */
+#define KPC_REE1        (0x1 <<  3)  /* Rotary Encoder1 Enable */
+#define KPC_REE0        (0x1 <<  2)  /* Rotary Encoder0 Enable */
+#define KPC_DE          (0x1 <<  1)  /* Direct Keypad Enable */
+#define KPC_DIE         (0x1 <<  0)  /* Direct Keypad interrupt Enable */
+
+#define KPDK_DKP        (0x1 << 31)
+#define KPDK_DK(n)	((n) & 0xff)
+
+#define KPREC_OF1       (0x1 << 31)
+#define kPREC_UF1       (0x1 << 30)
+#define KPREC_OF0       (0x1 << 15)
+#define KPREC_UF0       (0x1 << 14)
+
+#define KPREC_RECOUNT0(n)	((n) & 0xff)
+#define KPREC_RECOUNT1(n)	(((n) >> 16) & 0xff)
+
+#define KPMK_MKP        (0x1 << 31)
+#define KPAS_SO         (0x1 << 31)
+#define KPASMKPx_SO     (0x1 << 31)
+
+#define KPAS_MUKP(n)	(((n) >> 26) & 0x1f)
+#define KPAS_RP(n)	(((n) >> 4) & 0xf)
+#define KPAS_CP(n)	((n) & 0xf)
+
+#define KPASMKP_MKC_MASK	(0xff)
+
+#define keypad_readl(off)	__raw_readl(keypad->mmio_base + (off))
+#define keypad_writel(off, v)	__raw_writel((v), keypad->mmio_base + (off))
+
+#define MAX_MATRIX_KEY_NUM	(MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
+#define MAX_KEYPAD_KEYS		(MAX_MATRIX_KEY_NUM + MAX_DIRECT_KEY_NUM)
+
+struct pxa27x_keypad {
+	const struct pxa27x_keypad_platform_data *pdata;
+
+	struct clk *clk;
+	struct input_dev *input_dev;
+	void __iomem *mmio_base;
+
+	int irq;
+
+	unsigned short keycodes[MAX_KEYPAD_KEYS];
+	int rotary_rel_code[2];
+
+	unsigned int row_shift;
+
+	/* state row bits of each column scan */
+	uint32_t matrix_key_state[MAX_MATRIX_KEY_COLS];
+	uint32_t direct_key_state;
+
+	unsigned int direct_key_mask;
+};
+
+#ifdef CONFIG_OF
+static int pxa27x_keypad_matrix_key_parse_dt(struct pxa27x_keypad *keypad,
+				struct pxa27x_keypad_platform_data *pdata)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	struct device *dev = input_dev->dev.parent;
+	u32 rows, cols;
+	int error;
+
+	error = matrix_keypad_parse_properties(dev, &rows, &cols);
+	if (error)
+		return error;
+
+	if (rows > MAX_MATRIX_KEY_ROWS || cols > MAX_MATRIX_KEY_COLS) {
+		dev_err(dev, "rows or cols exceeds maximum value\n");
+		return -EINVAL;
+	}
+
+	pdata->matrix_key_rows = rows;
+	pdata->matrix_key_cols = cols;
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   pdata->matrix_key_rows,
+					   pdata->matrix_key_cols,
+					   keypad->keycodes, input_dev);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int pxa27x_keypad_direct_key_parse_dt(struct pxa27x_keypad *keypad,
+				struct pxa27x_keypad_platform_data *pdata)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	const __be16 *prop;
+	unsigned short code;
+	unsigned int proplen, size;
+	int i;
+	int error;
+
+	error = of_property_read_u32(np, "marvell,direct-key-count",
+				     &pdata->direct_key_num);
+	if (error) {
+		/*
+		 * If do not have marvel,direct-key-count defined,
+		 * it means direct key is not supported.
+		 */
+		return error == -EINVAL ? 0 : error;
+	}
+
+	error = of_property_read_u32(np, "marvell,direct-key-mask",
+				     &pdata->direct_key_mask);
+	if (error) {
+		if (error != -EINVAL)
+			return error;
+
+		/*
+		 * If marvell,direct-key-mask is not defined, driver will use
+		 * default value. Default value is set when configure the keypad.
+		 */
+		pdata->direct_key_mask = 0;
+	}
+
+	pdata->direct_key_low_active = of_property_read_bool(np,
+					"marvell,direct-key-low-active");
+
+	prop = of_get_property(np, "marvell,direct-key-map", &proplen);
+	if (!prop)
+		return -EINVAL;
+
+	if (proplen % sizeof(u16))
+		return -EINVAL;
+
+	size = proplen / sizeof(u16);
+
+	/* Only MAX_DIRECT_KEY_NUM is accepted.*/
+	if (size > MAX_DIRECT_KEY_NUM)
+		return -EINVAL;
+
+	for (i = 0; i < size; i++) {
+		code = be16_to_cpup(prop + i);
+		keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+
+	return 0;
+}
+
+static int pxa27x_keypad_rotary_parse_dt(struct pxa27x_keypad *keypad,
+				struct pxa27x_keypad_platform_data *pdata)
+{
+	const __be32 *prop;
+	int i, relkey_ret;
+	unsigned int code, proplen;
+	const char *rotaryname[2] = {
+			"marvell,rotary0", "marvell,rotary1"};
+	const char relkeyname[] = {"marvell,rotary-rel-key"};
+	struct input_dev *input_dev = keypad->input_dev;
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+
+	relkey_ret = of_property_read_u32(np, relkeyname, &code);
+	/* if can read correct rotary key-code, we do not need this. */
+	if (relkey_ret == 0) {
+		unsigned short relcode;
+
+		/* rotary0 taks lower half, rotary1 taks upper half. */
+		relcode = code & 0xffff;
+		pdata->rotary0_rel_code = (code & 0xffff);
+		__set_bit(relcode, input_dev->relbit);
+
+		relcode = code >> 16;
+		pdata->rotary1_rel_code = relcode;
+		__set_bit(relcode, input_dev->relbit);
+	}
+
+	for (i = 0; i < 2; i++) {
+		prop = of_get_property(np, rotaryname[i], &proplen);
+		/*
+		 * If the prop is not set, it means keypad does not need
+		 * initialize the rotaryX.
+		 */
+		if (!prop)
+			continue;
+
+		code = be32_to_cpup(prop);
+		/*
+		 * Not all up/down key code are valid.
+		 * Now we depends on direct-rel-code.
+		 */
+		if ((!(code & 0xffff) || !(code >> 16)) && relkey_ret) {
+			return relkey_ret;
+		} else {
+			unsigned int n = MAX_MATRIX_KEY_NUM + (i << 1);
+			unsigned short keycode;
+
+			keycode = code & 0xffff;
+			keypad->keycodes[n] = keycode;
+			__set_bit(keycode, input_dev->keybit);
+
+			keycode = code >> 16;
+			keypad->keycodes[n + 1] = keycode;
+			__set_bit(keycode, input_dev->keybit);
+
+			if (i == 0)
+				pdata->rotary0_rel_code = -1;
+			else
+				pdata->rotary1_rel_code = -1;
+		}
+		if (i == 0)
+			pdata->enable_rotary0 = 1;
+		else
+			pdata->enable_rotary1 = 1;
+	}
+
+	keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
+	keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
+
+	return 0;
+}
+
+static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	struct pxa27x_keypad_platform_data *pdata;
+	int error;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "failed to allocate memory for pdata\n");
+		return -ENOMEM;
+	}
+
+	error = pxa27x_keypad_matrix_key_parse_dt(keypad, pdata);
+	if (error) {
+		dev_err(dev, "failed to parse matrix key\n");
+		return error;
+	}
+
+	error = pxa27x_keypad_direct_key_parse_dt(keypad, pdata);
+	if (error) {
+		dev_err(dev, "failed to parse direct key\n");
+		return error;
+	}
+
+	error = pxa27x_keypad_rotary_parse_dt(keypad, pdata);
+	if (error) {
+		dev_err(dev, "failed to parse rotary key\n");
+		return error;
+	}
+
+	error = of_property_read_u32(np, "marvell,debounce-interval",
+				     &pdata->debounce_interval);
+	if (error) {
+		dev_err(dev, "failed to parse debounce-interval\n");
+		return error;
+	}
+
+	/*
+	 * The keycodes may not only includes matrix key but also the direct
+	 * key or rotary key.
+	 */
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+
+	keypad->pdata = pdata;
+	return 0;
+}
+
+#else
+
+static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad)
+{
+	dev_info(keypad->input_dev->dev.parent, "missing platform data\n");
+
+	return -EINVAL;
+}
+
+#endif
+
+static int pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
+{
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	struct input_dev *input_dev = keypad->input_dev;
+	unsigned short keycode;
+	int i;
+	int error;
+
+	error = matrix_keypad_build_keymap(pdata->matrix_keymap_data, NULL,
+					   pdata->matrix_key_rows,
+					   pdata->matrix_key_cols,
+					   keypad->keycodes, input_dev);
+	if (error)
+		return error;
+
+	/*
+	 * The keycodes may not only include matrix keys but also the direct
+	 * or rotary keys.
+	 */
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+
+	/* For direct keys. */
+	for (i = 0; i < pdata->direct_key_num; i++) {
+		keycode = pdata->direct_key_map[i];
+		keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = keycode;
+		__set_bit(keycode, input_dev->keybit);
+	}
+
+	if (pdata->enable_rotary0) {
+		if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
+			keycode = pdata->rotary0_up_key;
+			keypad->keycodes[MAX_MATRIX_KEY_NUM + 0] = keycode;
+			__set_bit(keycode, input_dev->keybit);
+
+			keycode = pdata->rotary0_down_key;
+			keypad->keycodes[MAX_MATRIX_KEY_NUM + 1] = keycode;
+			__set_bit(keycode, input_dev->keybit);
+
+			keypad->rotary_rel_code[0] = -1;
+		} else {
+			keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
+			__set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+		}
+	}
+
+	if (pdata->enable_rotary1) {
+		if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
+			keycode = pdata->rotary1_up_key;
+			keypad->keycodes[MAX_MATRIX_KEY_NUM + 2] = keycode;
+			__set_bit(keycode, input_dev->keybit);
+
+			keycode = pdata->rotary1_down_key;
+			keypad->keycodes[MAX_MATRIX_KEY_NUM + 3] = keycode;
+			__set_bit(keycode, input_dev->keybit);
+
+			keypad->rotary_rel_code[1] = -1;
+		} else {
+			keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
+			__set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+		}
+	}
+
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	return 0;
+}
+
+static void pxa27x_keypad_scan_matrix(struct pxa27x_keypad *keypad)
+{
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	struct input_dev *input_dev = keypad->input_dev;
+	int row, col, num_keys_pressed = 0;
+	uint32_t new_state[MAX_MATRIX_KEY_COLS];
+	uint32_t kpas = keypad_readl(KPAS);
+
+	num_keys_pressed = KPAS_MUKP(kpas);
+
+	memset(new_state, 0, sizeof(new_state));
+
+	if (num_keys_pressed == 0)
+		goto scan;
+
+	if (num_keys_pressed == 1) {
+		col = KPAS_CP(kpas);
+		row = KPAS_RP(kpas);
+
+		/* if invalid row/col, treat as no key pressed */
+		if (col >= pdata->matrix_key_cols ||
+		    row >= pdata->matrix_key_rows)
+			goto scan;
+
+		new_state[col] = (1 << row);
+		goto scan;
+	}
+
+	if (num_keys_pressed > 1) {
+		uint32_t kpasmkp0 = keypad_readl(KPASMKP0);
+		uint32_t kpasmkp1 = keypad_readl(KPASMKP1);
+		uint32_t kpasmkp2 = keypad_readl(KPASMKP2);
+		uint32_t kpasmkp3 = keypad_readl(KPASMKP3);
+
+		new_state[0] = kpasmkp0 & KPASMKP_MKC_MASK;
+		new_state[1] = (kpasmkp0 >> 16) & KPASMKP_MKC_MASK;
+		new_state[2] = kpasmkp1 & KPASMKP_MKC_MASK;
+		new_state[3] = (kpasmkp1 >> 16) & KPASMKP_MKC_MASK;
+		new_state[4] = kpasmkp2 & KPASMKP_MKC_MASK;
+		new_state[5] = (kpasmkp2 >> 16) & KPASMKP_MKC_MASK;
+		new_state[6] = kpasmkp3 & KPASMKP_MKC_MASK;
+		new_state[7] = (kpasmkp3 >> 16) & KPASMKP_MKC_MASK;
+	}
+scan:
+	for (col = 0; col < pdata->matrix_key_cols; col++) {
+		uint32_t bits_changed;
+		int code;
+
+		bits_changed = keypad->matrix_key_state[col] ^ new_state[col];
+		if (bits_changed == 0)
+			continue;
+
+		for (row = 0; row < pdata->matrix_key_rows; row++) {
+			if ((bits_changed & (1 << row)) == 0)
+				continue;
+
+			code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+
+			input_event(input_dev, EV_MSC, MSC_SCAN, code);
+			input_report_key(input_dev, keypad->keycodes[code],
+					 new_state[col] & (1 << row));
+		}
+	}
+	input_sync(input_dev);
+	memcpy(keypad->matrix_key_state, new_state, sizeof(new_state));
+}
+
+#define DEFAULT_KPREC	(0x007f007f)
+
+static inline int rotary_delta(uint32_t kprec)
+{
+	if (kprec & KPREC_OF0)
+		return (kprec & 0xff) + 0x7f;
+	else if (kprec & KPREC_UF0)
+		return (kprec & 0xff) - 0x7f - 0xff;
+	else
+		return (kprec & 0xff) - 0x7f;
+}
+
+static void report_rotary_event(struct pxa27x_keypad *keypad, int r, int delta)
+{
+	struct input_dev *dev = keypad->input_dev;
+
+	if (delta == 0)
+		return;
+
+	if (keypad->rotary_rel_code[r] == -1) {
+		int code = MAX_MATRIX_KEY_NUM + 2 * r + (delta > 0 ? 0 : 1);
+		unsigned char keycode = keypad->keycodes[code];
+
+		/* simulate a press-n-release */
+		input_event(dev, EV_MSC, MSC_SCAN, code);
+		input_report_key(dev, keycode, 1);
+		input_sync(dev);
+		input_event(dev, EV_MSC, MSC_SCAN, code);
+		input_report_key(dev, keycode, 0);
+		input_sync(dev);
+	} else {
+		input_report_rel(dev, keypad->rotary_rel_code[r], delta);
+		input_sync(dev);
+	}
+}
+
+static void pxa27x_keypad_scan_rotary(struct pxa27x_keypad *keypad)
+{
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	uint32_t kprec;
+
+	/* read and reset to default count value */
+	kprec = keypad_readl(KPREC);
+	keypad_writel(KPREC, DEFAULT_KPREC);
+
+	if (pdata->enable_rotary0)
+		report_rotary_event(keypad, 0, rotary_delta(kprec));
+
+	if (pdata->enable_rotary1)
+		report_rotary_event(keypad, 1, rotary_delta(kprec >> 16));
+}
+
+static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
+{
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	struct input_dev *input_dev = keypad->input_dev;
+	unsigned int new_state;
+	uint32_t kpdk, bits_changed;
+	int i;
+
+	kpdk = keypad_readl(KPDK);
+
+	if (pdata->enable_rotary0 || pdata->enable_rotary1)
+		pxa27x_keypad_scan_rotary(keypad);
+
+	/*
+	 * The KPDR_DK only output the key pin level, so it relates to board,
+	 * and low level may be active.
+	 */
+	if (pdata->direct_key_low_active)
+		new_state = ~KPDK_DK(kpdk) & keypad->direct_key_mask;
+	else
+		new_state = KPDK_DK(kpdk) & keypad->direct_key_mask;
+
+	bits_changed = keypad->direct_key_state ^ new_state;
+
+	if (bits_changed == 0)
+		return;
+
+	for (i = 0; i < pdata->direct_key_num; i++) {
+		if (bits_changed & (1 << i)) {
+			int code = MAX_MATRIX_KEY_NUM + i;
+
+			input_event(input_dev, EV_MSC, MSC_SCAN, code);
+			input_report_key(input_dev, keypad->keycodes[code],
+					 new_state & (1 << i));
+		}
+	}
+	input_sync(input_dev);
+	keypad->direct_key_state = new_state;
+}
+
+static void clear_wakeup_event(struct pxa27x_keypad *keypad)
+{
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+
+	if (pdata->clear_wakeup_event)
+		(pdata->clear_wakeup_event)();
+}
+
+static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id)
+{
+	struct pxa27x_keypad *keypad = dev_id;
+	unsigned long kpc = keypad_readl(KPC);
+
+	clear_wakeup_event(keypad);
+
+	if (kpc & KPC_DI)
+		pxa27x_keypad_scan_direct(keypad);
+
+	if (kpc & KPC_MI)
+		pxa27x_keypad_scan_matrix(keypad);
+
+	return IRQ_HANDLED;
+}
+
+static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
+{
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int mask = 0, direct_key_num = 0;
+	unsigned long kpc = 0;
+
+	/* clear pending interrupt bit */
+	keypad_readl(KPC);
+
+	/* enable matrix keys with automatic scan */
+	if (pdata->matrix_key_rows && pdata->matrix_key_cols) {
+		kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL;
+		kpc |= KPC_MKRN(pdata->matrix_key_rows) |
+		       KPC_MKCN(pdata->matrix_key_cols);
+	}
+
+	/* enable rotary key, debounce interval same as direct keys */
+	if (pdata->enable_rotary0) {
+		mask |= 0x03;
+		direct_key_num = 2;
+		kpc |= KPC_REE0;
+	}
+
+	if (pdata->enable_rotary1) {
+		mask |= 0x0c;
+		direct_key_num = 4;
+		kpc |= KPC_REE1;
+	}
+
+	if (pdata->direct_key_num > direct_key_num)
+		direct_key_num = pdata->direct_key_num;
+
+	/*
+	 * Direct keys usage may not start from KP_DKIN0, check the platfrom
+	 * mask data to config the specific.
+	 */
+	if (pdata->direct_key_mask)
+		keypad->direct_key_mask = pdata->direct_key_mask;
+	else
+		keypad->direct_key_mask = ((1 << direct_key_num) - 1) & ~mask;
+
+	/* enable direct key */
+	if (direct_key_num)
+		kpc |= KPC_DE | KPC_DIE | KPC_DKN(direct_key_num);
+
+	keypad_writel(KPC, kpc | KPC_RE_ZERO_DEB);
+	keypad_writel(KPREC, DEFAULT_KPREC);
+	keypad_writel(KPKDI, pdata->debounce_interval);
+}
+
+static int pxa27x_keypad_open(struct input_dev *dev)
+{
+	struct pxa27x_keypad *keypad = input_get_drvdata(dev);
+	int ret;
+	/* Enable unit clock */
+	ret = clk_prepare_enable(keypad->clk);
+	if (ret)
+		return ret;
+
+	pxa27x_keypad_config(keypad);
+
+	return 0;
+}
+
+static void pxa27x_keypad_close(struct input_dev *dev)
+{
+	struct pxa27x_keypad *keypad = input_get_drvdata(dev);
+
+	/* Disable clock unit */
+	clk_disable_unprepare(keypad->clk);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pxa27x_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
+
+	/*
+	 * If the keypad is used a wake up source, clock can not be disabled.
+	 * Or it can not detect the key pressing.
+	 */
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(keypad->irq);
+	else
+		clk_disable_unprepare(keypad->clk);
+
+	return 0;
+}
+
+static int pxa27x_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+	int ret = 0;
+
+	/*
+	 * If the keypad is used as wake up source, the clock is not turned
+	 * off. So do not need configure it again.
+	 */
+	if (device_may_wakeup(&pdev->dev)) {
+		disable_irq_wake(keypad->irq);
+	} else {
+		mutex_lock(&input_dev->mutex);
+
+		if (input_dev->users) {
+			/* Enable unit clock */
+			ret = clk_prepare_enable(keypad->clk);
+			if (!ret)
+				pxa27x_keypad_config(keypad);
+		}
+
+		mutex_unlock(&input_dev->mutex);
+	}
+
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pxa27x_keypad_pm_ops,
+			 pxa27x_keypad_suspend, pxa27x_keypad_resume);
+
+
+static int pxa27x_keypad_probe(struct platform_device *pdev)
+{
+	const struct pxa27x_keypad_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
+	struct pxa27x_keypad *keypad;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq, error;
+
+	/* Driver need build keycode from device tree or pdata */
+	if (!np && !pdata)
+		return -EINVAL;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to get I/O memory\n");
+		return -ENXIO;
+	}
+
+	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad),
+			      GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
+
+	keypad->pdata = pdata;
+	keypad->input_dev = input_dev;
+	keypad->irq = irq;
+
+	keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad->mmio_base))
+		return PTR_ERR(keypad->mmio_base);
+
+	keypad->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get keypad clock\n");
+		return PTR_ERR(keypad->clk);
+	}
+
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->open = pxa27x_keypad_open;
+	input_dev->close = pxa27x_keypad_close;
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->keycode = keypad->keycodes;
+	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+
+	input_set_drvdata(input_dev, keypad);
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	if (pdata) {
+		error = pxa27x_keypad_build_keycode(keypad);
+	} else {
+		error = pxa27x_keypad_build_keycode_from_dt(keypad);
+		/*
+		 * Data that we get from DT resides in dynamically
+		 * allocated memory so we need to update our pdata
+		 * pointer.
+		 */
+		pdata = keypad->pdata;
+	}
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keycode\n");
+		return error;
+	}
+
+	keypad->row_shift = get_count_order(pdata->matrix_key_cols);
+
+	if ((pdata->enable_rotary0 && keypad->rotary_rel_code[0] != -1) ||
+	    (pdata->enable_rotary1 && keypad->rotary_rel_code[1] != -1)) {
+		input_dev->evbit[0] |= BIT_MASK(EV_REL);
+	}
+
+	error = devm_request_irq(&pdev->dev, irq, pxa27x_keypad_irq_handler,
+				 0, pdev->name, keypad);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		return error;
+	}
+
+	/* Register the input device */
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, keypad);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa27x_keypad_dt_match[] = {
+	{ .compatible = "marvell,pxa27x-keypad" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pxa27x_keypad_dt_match);
+#endif
+
+static struct platform_driver pxa27x_keypad_driver = {
+	.probe		= pxa27x_keypad_probe,
+	.driver		= {
+		.name	= "pxa27x-keypad",
+		.of_match_table = of_match_ptr(pxa27x_keypad_dt_match),
+		.pm	= &pxa27x_keypad_pm_ops,
+	},
+};
+module_platform_driver(pxa27x_keypad_driver);
+
+MODULE_DESCRIPTION("PXA27x Keypad Controller Driver");
+MODULE_LICENSE("GPL");
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa27x-keypad");
diff --git a/drivers/input/keyboard/pxa930_rotary.c b/drivers/input/keyboard/pxa930_rotary.c
new file mode 100644
index 000000000..2fe9dcfe0
--- /dev/null
+++ b/drivers/input/keyboard/pxa930_rotary.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the enhanced rotary controller on pxa930 and pxa935
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <linux/platform_data/keyboard-pxa930_rotary.h>
+
+#define SBCR	(0x04)
+#define ERCR	(0x0c)
+
+#define SBCR_ERSB	(1 << 5)
+
+struct pxa930_rotary {
+	struct input_dev	*input_dev;
+	void __iomem		*mmio_base;
+	int			last_ercr;
+
+	struct pxa930_rotary_platform_data *pdata;
+};
+
+static void clear_sbcr(struct pxa930_rotary *r)
+{
+	uint32_t sbcr = __raw_readl(r->mmio_base + SBCR);
+
+	__raw_writel(sbcr | SBCR_ERSB, r->mmio_base + SBCR);
+	__raw_writel(sbcr & ~SBCR_ERSB, r->mmio_base + SBCR);
+}
+
+static irqreturn_t rotary_irq(int irq, void *dev_id)
+{
+	struct pxa930_rotary *r = dev_id;
+	struct pxa930_rotary_platform_data *pdata = r->pdata;
+	int ercr, delta, key;
+
+	ercr = __raw_readl(r->mmio_base + ERCR) & 0xf;
+	clear_sbcr(r);
+
+	delta = ercr - r->last_ercr;
+	if (delta == 0)
+		return IRQ_HANDLED;
+
+	r->last_ercr = ercr;
+
+	if (pdata->up_key && pdata->down_key) {
+		key = (delta > 0) ? pdata->up_key : pdata->down_key;
+		input_report_key(r->input_dev, key, 1);
+		input_sync(r->input_dev);
+		input_report_key(r->input_dev, key, 0);
+	} else
+		input_report_rel(r->input_dev, pdata->rel_code, delta);
+
+	input_sync(r->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int pxa930_rotary_open(struct input_dev *dev)
+{
+	struct pxa930_rotary *r = input_get_drvdata(dev);
+
+	clear_sbcr(r);
+
+	return 0;
+}
+
+static void pxa930_rotary_close(struct input_dev *dev)
+{
+	struct pxa930_rotary *r = input_get_drvdata(dev);
+
+	clear_sbcr(r);
+}
+
+static int pxa930_rotary_probe(struct platform_device *pdev)
+{
+	struct pxa930_rotary_platform_data *pdata =
+			dev_get_platdata(&pdev->dev);
+	struct pxa930_rotary *r;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq;
+	int err;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no I/O memory defined\n");
+		return -ENXIO;
+	}
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	r = kzalloc(sizeof(struct pxa930_rotary), GFP_KERNEL);
+	if (!r)
+		return -ENOMEM;
+
+	r->mmio_base = ioremap(res->start, resource_size(res));
+	if (r->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to remap IO memory\n");
+		err = -ENXIO;
+		goto failed_free;
+	}
+
+	r->pdata = pdata;
+	platform_set_drvdata(pdev, r);
+
+	/* allocate and register the input device */
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		err = -ENOMEM;
+		goto failed_free_io;
+	}
+
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->open = pxa930_rotary_open;
+	input_dev->close = pxa930_rotary_close;
+	input_dev->dev.parent = &pdev->dev;
+
+	if (pdata->up_key && pdata->down_key) {
+		__set_bit(pdata->up_key, input_dev->keybit);
+		__set_bit(pdata->down_key, input_dev->keybit);
+		__set_bit(EV_KEY, input_dev->evbit);
+	} else {
+		__set_bit(pdata->rel_code, input_dev->relbit);
+		__set_bit(EV_REL, input_dev->evbit);
+	}
+
+	r->input_dev = input_dev;
+	input_set_drvdata(input_dev, r);
+
+	err = request_irq(irq, rotary_irq, 0,
+			"enhanced rotary", r);
+	if (err) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		goto failed_free_input;
+	}
+
+	err = input_register_device(input_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto failed_free_irq;
+	}
+
+	return 0;
+
+failed_free_irq:
+	free_irq(irq, r);
+failed_free_input:
+	input_free_device(input_dev);
+failed_free_io:
+	iounmap(r->mmio_base);
+failed_free:
+	kfree(r);
+	return err;
+}
+
+static int pxa930_rotary_remove(struct platform_device *pdev)
+{
+	struct pxa930_rotary *r = platform_get_drvdata(pdev);
+
+	free_irq(platform_get_irq(pdev, 0), r);
+	input_unregister_device(r->input_dev);
+	iounmap(r->mmio_base);
+	kfree(r);
+
+	return 0;
+}
+
+static struct platform_driver pxa930_rotary_driver = {
+	.driver		= {
+		.name	= "pxa930-rotary",
+	},
+	.probe		= pxa930_rotary_probe,
+	.remove		= pxa930_rotary_remove,
+};
+module_platform_driver(pxa930_rotary_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for PXA93x Enhanced Rotary Controller");
+MODULE_AUTHOR("Yao Yong <yaoyong@marvell.com>");
diff --git a/drivers/input/keyboard/qt1050.c b/drivers/input/keyboard/qt1050.c
new file mode 100644
index 000000000..403060d05
--- /dev/null
+++ b/drivers/input/keyboard/qt1050.c
@@ -0,0 +1,598 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Microchip AT42QT1050 QTouch Sensor Controller
+ *
+ *  Copyright (C) 2019 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ *
+ *  Base on AT42QT1070 driver by:
+ *  Bo Shen <voice.shen@atmel.com>
+ *  Copyright (C) 2011 Atmel
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+/* Chip ID */
+#define QT1050_CHIP_ID		0x00
+#define QT1050_CHIP_ID_VER	0x46
+
+/* Firmware version */
+#define QT1050_FW_VERSION	0x01
+
+/* Detection status */
+#define QT1050_DET_STATUS	0x02
+
+/* Key status */
+#define QT1050_KEY_STATUS	0x03
+
+/* Key Signals */
+#define QT1050_KEY_SIGNAL_0_MSB	0x06
+#define QT1050_KEY_SIGNAL_0_LSB	0x07
+#define QT1050_KEY_SIGNAL_1_MSB	0x08
+#define QT1050_KEY_SIGNAL_1_LSB	0x09
+#define QT1050_KEY_SIGNAL_2_MSB	0x0c
+#define QT1050_KEY_SIGNAL_2_LSB	0x0d
+#define QT1050_KEY_SIGNAL_3_MSB	0x0e
+#define QT1050_KEY_SIGNAL_3_LSB	0x0f
+#define QT1050_KEY_SIGNAL_4_MSB	0x10
+#define QT1050_KEY_SIGNAL_4_LSB	0x11
+
+/* Reference data */
+#define QT1050_REF_DATA_0_MSB	0x14
+#define QT1050_REF_DATA_0_LSB	0x15
+#define QT1050_REF_DATA_1_MSB	0x16
+#define QT1050_REF_DATA_1_LSB	0x17
+#define QT1050_REF_DATA_2_MSB	0x1a
+#define QT1050_REF_DATA_2_LSB	0x1b
+#define QT1050_REF_DATA_3_MSB	0x1c
+#define QT1050_REF_DATA_3_LSB	0x1d
+#define QT1050_REF_DATA_4_MSB	0x1e
+#define QT1050_REF_DATA_4_LSB	0x1f
+
+/* Negative threshold level */
+#define QT1050_NTHR_0		0x21
+#define QT1050_NTHR_1		0x22
+#define QT1050_NTHR_2		0x24
+#define QT1050_NTHR_3		0x25
+#define QT1050_NTHR_4		0x26
+
+/* Pulse / Scale  */
+#define QT1050_PULSE_SCALE_0	0x28
+#define QT1050_PULSE_SCALE_1	0x29
+#define QT1050_PULSE_SCALE_2	0x2b
+#define QT1050_PULSE_SCALE_3	0x2c
+#define QT1050_PULSE_SCALE_4	0x2d
+
+/* Detection integrator counter / AKS */
+#define QT1050_DI_AKS_0		0x2f
+#define QT1050_DI_AKS_1		0x30
+#define QT1050_DI_AKS_2		0x32
+#define QT1050_DI_AKS_3		0x33
+#define QT1050_DI_AKS_4		0x34
+
+/* Charge Share Delay */
+#define QT1050_CSD_0		0x36
+#define QT1050_CSD_1		0x37
+#define QT1050_CSD_2		0x39
+#define QT1050_CSD_3		0x3a
+#define QT1050_CSD_4		0x3b
+
+/* Low Power Mode */
+#define QT1050_LPMODE		0x3d
+
+/* Calibration and Reset */
+#define QT1050_RES_CAL		0x3f
+#define QT1050_RES_CAL_RESET		BIT(7)
+#define QT1050_RES_CAL_CALIBRATE	BIT(1)
+
+#define QT1050_MAX_KEYS		5
+#define QT1050_RESET_TIME	255
+
+struct qt1050_key_regs {
+	unsigned int nthr;
+	unsigned int pulse_scale;
+	unsigned int di_aks;
+	unsigned int csd;
+};
+
+struct qt1050_key {
+	u32 num;
+	u32 charge_delay;
+	u32 thr_cnt;
+	u32 samples;
+	u32 scale;
+	u32 keycode;
+};
+
+struct qt1050_priv {
+	struct i2c_client	*client;
+	struct input_dev	*input;
+	struct regmap		*regmap;
+	struct qt1050_key	keys[QT1050_MAX_KEYS];
+	unsigned short		keycodes[QT1050_MAX_KEYS];
+	u8			reg_keys;
+	u8			last_keys;
+};
+
+static const struct qt1050_key_regs qt1050_key_regs_data[] = {
+	{
+		.nthr = QT1050_NTHR_0,
+		.pulse_scale = QT1050_PULSE_SCALE_0,
+		.di_aks = QT1050_DI_AKS_0,
+		.csd = QT1050_CSD_0,
+	}, {
+		.nthr = QT1050_NTHR_1,
+		.pulse_scale = QT1050_PULSE_SCALE_1,
+		.di_aks = QT1050_DI_AKS_1,
+		.csd = QT1050_CSD_1,
+	}, {
+		.nthr = QT1050_NTHR_2,
+		.pulse_scale = QT1050_PULSE_SCALE_2,
+		.di_aks = QT1050_DI_AKS_2,
+		.csd = QT1050_CSD_2,
+	}, {
+		.nthr = QT1050_NTHR_3,
+		.pulse_scale = QT1050_PULSE_SCALE_3,
+		.di_aks = QT1050_DI_AKS_3,
+		.csd = QT1050_CSD_3,
+	}, {
+		.nthr = QT1050_NTHR_4,
+		.pulse_scale = QT1050_PULSE_SCALE_4,
+		.di_aks = QT1050_DI_AKS_4,
+		.csd = QT1050_CSD_4,
+	}
+};
+
+static bool qt1050_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case QT1050_DET_STATUS:
+	case QT1050_KEY_STATUS:
+	case QT1050_KEY_SIGNAL_0_MSB:
+	case QT1050_KEY_SIGNAL_0_LSB:
+	case QT1050_KEY_SIGNAL_1_MSB:
+	case QT1050_KEY_SIGNAL_1_LSB:
+	case QT1050_KEY_SIGNAL_2_MSB:
+	case QT1050_KEY_SIGNAL_2_LSB:
+	case QT1050_KEY_SIGNAL_3_MSB:
+	case QT1050_KEY_SIGNAL_3_LSB:
+	case QT1050_KEY_SIGNAL_4_MSB:
+	case QT1050_KEY_SIGNAL_4_LSB:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_range qt1050_readable_ranges[] = {
+	regmap_reg_range(QT1050_CHIP_ID, QT1050_KEY_STATUS),
+	regmap_reg_range(QT1050_KEY_SIGNAL_0_MSB, QT1050_KEY_SIGNAL_1_LSB),
+	regmap_reg_range(QT1050_KEY_SIGNAL_2_MSB, QT1050_KEY_SIGNAL_4_LSB),
+	regmap_reg_range(QT1050_REF_DATA_0_MSB, QT1050_REF_DATA_1_LSB),
+	regmap_reg_range(QT1050_REF_DATA_2_MSB, QT1050_REF_DATA_4_LSB),
+	regmap_reg_range(QT1050_NTHR_0, QT1050_NTHR_1),
+	regmap_reg_range(QT1050_NTHR_2, QT1050_NTHR_4),
+	regmap_reg_range(QT1050_PULSE_SCALE_0, QT1050_PULSE_SCALE_1),
+	regmap_reg_range(QT1050_PULSE_SCALE_2, QT1050_PULSE_SCALE_4),
+	regmap_reg_range(QT1050_DI_AKS_0, QT1050_DI_AKS_1),
+	regmap_reg_range(QT1050_DI_AKS_2, QT1050_DI_AKS_4),
+	regmap_reg_range(QT1050_CSD_0, QT1050_CSD_1),
+	regmap_reg_range(QT1050_CSD_2, QT1050_RES_CAL),
+};
+
+static const struct regmap_access_table qt1050_readable_table = {
+	.yes_ranges = qt1050_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(qt1050_readable_ranges),
+};
+
+static const struct regmap_range qt1050_writeable_ranges[] = {
+	regmap_reg_range(QT1050_NTHR_0, QT1050_NTHR_1),
+	regmap_reg_range(QT1050_NTHR_2, QT1050_NTHR_4),
+	regmap_reg_range(QT1050_PULSE_SCALE_0, QT1050_PULSE_SCALE_1),
+	regmap_reg_range(QT1050_PULSE_SCALE_2, QT1050_PULSE_SCALE_4),
+	regmap_reg_range(QT1050_DI_AKS_0, QT1050_DI_AKS_1),
+	regmap_reg_range(QT1050_DI_AKS_2, QT1050_DI_AKS_4),
+	regmap_reg_range(QT1050_CSD_0, QT1050_CSD_1),
+	regmap_reg_range(QT1050_CSD_2, QT1050_RES_CAL),
+};
+
+static const struct regmap_access_table qt1050_writeable_table = {
+	.yes_ranges = qt1050_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(qt1050_writeable_ranges),
+};
+
+static struct regmap_config qt1050_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = QT1050_RES_CAL,
+
+	.cache_type = REGCACHE_RBTREE,
+
+	.wr_table = &qt1050_writeable_table,
+	.rd_table = &qt1050_readable_table,
+	.volatile_reg = qt1050_volatile_reg,
+};
+
+static bool qt1050_identify(struct qt1050_priv *ts)
+{
+	unsigned int val;
+	int err;
+
+	/* Read Chip ID */
+	regmap_read(ts->regmap, QT1050_CHIP_ID, &val);
+	if (val != QT1050_CHIP_ID_VER) {
+		dev_err(&ts->client->dev, "ID %d not supported\n", val);
+		return false;
+	}
+
+	/* Read firmware version */
+	err = regmap_read(ts->regmap, QT1050_FW_VERSION, &val);
+	if (err) {
+		dev_err(&ts->client->dev, "could not read the firmware version\n");
+		return false;
+	}
+
+	dev_info(&ts->client->dev, "AT42QT1050 firmware version %1d.%1d\n",
+		 val >> 4, val & 0xf);
+
+	return true;
+}
+
+static irqreturn_t qt1050_irq_threaded(int irq, void *dev_id)
+{
+	struct qt1050_priv *ts = dev_id;
+	struct input_dev *input = ts->input;
+	unsigned long new_keys, changed;
+	unsigned int val;
+	int i, err;
+
+	/* Read the detected status register, thus clearing interrupt */
+	err = regmap_read(ts->regmap, QT1050_DET_STATUS, &val);
+	if (err) {
+		dev_err(&ts->client->dev, "Fail to read detection status: %d\n",
+			err);
+		return IRQ_NONE;
+	}
+
+	/* Read which key changed, keys are not continuous */
+	err = regmap_read(ts->regmap, QT1050_KEY_STATUS, &val);
+	if (err) {
+		dev_err(&ts->client->dev,
+			"Fail to determine the key status: %d\n", err);
+		return IRQ_NONE;
+	}
+	new_keys = (val & 0x70) >> 2 | (val & 0x6) >> 1;
+	changed = ts->last_keys ^ new_keys;
+	/* Report registered keys only */
+	changed &= ts->reg_keys;
+
+	for_each_set_bit(i, &changed, QT1050_MAX_KEYS)
+		input_report_key(input, ts->keys[i].keycode,
+				 test_bit(i, &new_keys));
+
+	ts->last_keys = new_keys;
+	input_sync(input);
+
+	return IRQ_HANDLED;
+}
+
+static const struct qt1050_key_regs *qt1050_get_key_regs(int key_num)
+{
+	return &qt1050_key_regs_data[key_num];
+}
+
+static int qt1050_set_key(struct regmap *map, int number, int on)
+{
+	const struct qt1050_key_regs *key_regs;
+
+	key_regs = qt1050_get_key_regs(number);
+
+	return regmap_update_bits(map, key_regs->di_aks, 0xfc,
+				  on ? BIT(4) : 0x00);
+}
+
+static int qt1050_apply_fw_data(struct qt1050_priv *ts)
+{
+	struct regmap *map = ts->regmap;
+	struct qt1050_key *button = &ts->keys[0];
+	const struct qt1050_key_regs *key_regs;
+	int i, err;
+
+	/* Disable all keys and enable only the specified ones */
+	for (i = 0; i < QT1050_MAX_KEYS; i++) {
+		err = qt1050_set_key(map, i, 0);
+		if (err)
+			return err;
+	}
+
+	for (i = 0; i < QT1050_MAX_KEYS; i++, button++) {
+		/* Keep KEY_RESERVED keys off */
+		if (button->keycode == KEY_RESERVED)
+			continue;
+
+		err = qt1050_set_key(map, button->num, 1);
+		if (err)
+			return err;
+
+		key_regs = qt1050_get_key_regs(button->num);
+
+		err = regmap_write(map, key_regs->pulse_scale,
+				   (button->samples << 4) | (button->scale));
+		if (err)
+			return err;
+		err = regmap_write(map, key_regs->csd, button->charge_delay);
+		if (err)
+			return err;
+		err = regmap_write(map, key_regs->nthr, button->thr_cnt);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int qt1050_parse_fw(struct qt1050_priv *ts)
+{
+	struct device *dev = &ts->client->dev;
+	struct fwnode_handle *child;
+	int nbuttons;
+
+	nbuttons = device_get_child_node_count(dev);
+	if (nbuttons == 0 || nbuttons > QT1050_MAX_KEYS)
+		return -ENODEV;
+
+	device_for_each_child_node(dev, child) {
+		struct qt1050_key button;
+
+		/* Required properties */
+		if (fwnode_property_read_u32(child, "linux,code",
+					     &button.keycode)) {
+			dev_err(dev, "Button without keycode\n");
+			goto err;
+		}
+		if (button.keycode >= KEY_MAX) {
+			dev_err(dev, "Invalid keycode 0x%x\n",
+				button.keycode);
+			goto err;
+		}
+
+		if (fwnode_property_read_u32(child, "reg",
+					     &button.num)) {
+			dev_err(dev, "Button without pad number\n");
+			goto err;
+		}
+		if (button.num < 0 || button.num > QT1050_MAX_KEYS - 1)
+			goto err;
+
+		ts->reg_keys |= BIT(button.num);
+
+		/* Optional properties */
+		if (fwnode_property_read_u32(child,
+					     "microchip,pre-charge-time-ns",
+					     &button.charge_delay)) {
+			button.charge_delay = 0;
+		} else {
+			if (button.charge_delay % 2500 == 0)
+				button.charge_delay =
+					button.charge_delay / 2500;
+			else
+				button.charge_delay = 0;
+		}
+
+		if (fwnode_property_read_u32(child, "microchip,average-samples",
+					 &button.samples)) {
+			button.samples = 0;
+		} else {
+			if (is_power_of_2(button.samples))
+				button.samples = ilog2(button.samples);
+			else
+				button.samples = 0;
+		}
+
+		if (fwnode_property_read_u32(child, "microchip,average-scaling",
+					     &button.scale)) {
+			button.scale = 0;
+		} else {
+			if (is_power_of_2(button.scale))
+				button.scale = ilog2(button.scale);
+			else
+				button.scale = 0;
+
+		}
+
+		if (fwnode_property_read_u32(child, "microchip,threshold",
+					 &button.thr_cnt)) {
+			button.thr_cnt = 20;
+		} else {
+			if (button.thr_cnt > 255)
+				button.thr_cnt = 20;
+		}
+
+		ts->keys[button.num] = button;
+	}
+
+	return 0;
+
+err:
+	fwnode_handle_put(child);
+	return -EINVAL;
+}
+
+static int qt1050_probe(struct i2c_client *client)
+{
+	struct qt1050_priv *ts;
+	struct input_dev *input;
+	struct device *dev = &client->dev;
+	struct regmap *map;
+	unsigned int status, i;
+	int err;
+
+	/* Check basic functionality */
+	err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE);
+	if (!err) {
+		dev_err(&client->dev, "%s adapter not supported\n",
+			dev_driver_string(&client->adapter->dev));
+		return -ENODEV;
+	}
+
+	if (!client->irq) {
+		dev_err(dev, "assign a irq line to this device\n");
+		return -EINVAL;
+	}
+
+	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	map = devm_regmap_init_i2c(client, &qt1050_regmap_config);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	ts->client = client;
+	ts->input = input;
+	ts->regmap = map;
+
+	i2c_set_clientdata(client, ts);
+
+	/* Identify the qt1050 chip */
+	if (!qt1050_identify(ts))
+		return -ENODEV;
+
+	/* Get pdata */
+	err = qt1050_parse_fw(ts);
+	if (err) {
+		dev_err(dev, "Failed to parse firmware: %d\n", err);
+		return err;
+	}
+
+	input->name = "AT42QT1050 QTouch Sensor";
+	input->dev.parent = &client->dev;
+	input->id.bustype = BUS_I2C;
+
+	/* Add the keycode */
+	input->keycode = ts->keycodes;
+	input->keycodesize = sizeof(ts->keycodes[0]);
+	input->keycodemax = QT1050_MAX_KEYS;
+
+	__set_bit(EV_KEY, input->evbit);
+	for (i = 0; i < QT1050_MAX_KEYS; i++) {
+		ts->keycodes[i] = ts->keys[i].keycode;
+		__set_bit(ts->keycodes[i], input->keybit);
+	}
+
+	/* Trigger re-calibration */
+	err = regmap_update_bits(ts->regmap, QT1050_RES_CAL, 0x7f,
+				 QT1050_RES_CAL_CALIBRATE);
+	if (err) {
+		dev_err(dev, "Trigger calibration failed: %d\n", err);
+		return err;
+	}
+	err = regmap_read_poll_timeout(ts->regmap, QT1050_DET_STATUS, status,
+				 status >> 7 == 1, 10000, 200000);
+	if (err) {
+		dev_err(dev, "Calibration failed: %d\n", err);
+		return err;
+	}
+
+	/* Soft reset to set defaults */
+	err = regmap_update_bits(ts->regmap, QT1050_RES_CAL,
+				 QT1050_RES_CAL_RESET, QT1050_RES_CAL_RESET);
+	if (err) {
+		dev_err(dev, "Trigger soft reset failed: %d\n", err);
+		return err;
+	}
+	msleep(QT1050_RESET_TIME);
+
+	/* Set pdata */
+	err = qt1050_apply_fw_data(ts);
+	if (err) {
+		dev_err(dev, "Failed to set firmware data: %d\n", err);
+		return err;
+	}
+
+	err = devm_request_threaded_irq(dev, client->irq, NULL,
+					qt1050_irq_threaded, IRQF_ONESHOT,
+					"qt1050", ts);
+	if (err) {
+		dev_err(&client->dev, "Failed to request irq: %d\n", err);
+		return err;
+	}
+
+	/* Clear #CHANGE line */
+	err = regmap_read(ts->regmap, QT1050_DET_STATUS, &status);
+	if (err) {
+		dev_err(dev, "Failed to clear #CHANGE line level: %d\n", err);
+		return err;
+	}
+
+	/* Register the input device */
+	err = input_register_device(ts->input);
+	if (err) {
+		dev_err(&client->dev, "Failed to register input device: %d\n",
+			err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused qt1050_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct qt1050_priv *ts = i2c_get_clientdata(client);
+
+	disable_irq(client->irq);
+
+	/*
+	 * Set measurement interval to 1s (125 x 8ms) if wakeup is allowed
+	 * else turn off. The 1s interval seems to be a good compromise between
+	 * low power and response time.
+	 */
+	return regmap_write(ts->regmap, QT1050_LPMODE,
+			    device_may_wakeup(dev) ? 125 : 0);
+}
+
+static int __maybe_unused qt1050_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct qt1050_priv *ts = i2c_get_clientdata(client);
+
+	enable_irq(client->irq);
+
+	/* Set measurement interval back to 16ms (2 x 8ms) */
+	return regmap_write(ts->regmap, QT1050_LPMODE, 2);
+}
+
+static SIMPLE_DEV_PM_OPS(qt1050_pm_ops, qt1050_suspend, qt1050_resume);
+
+static const struct of_device_id __maybe_unused qt1050_of_match[] = {
+	{ .compatible = "microchip,qt1050", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qt1050_of_match);
+
+static struct i2c_driver qt1050_driver = {
+	.driver	= {
+		.name = "qt1050",
+		.of_match_table = of_match_ptr(qt1050_of_match),
+		.pm = &qt1050_pm_ops,
+	},
+	.probe_new = qt1050_probe,
+};
+
+module_i2c_driver(qt1050_driver);
+
+MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de");
+MODULE_DESCRIPTION("Driver for AT42QT1050 QTouch sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
new file mode 100644
index 000000000..7174e1df1
--- /dev/null
+++ b/drivers/input/keyboard/qt1070.c
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Atmel AT42QT1070 QTouch Sensor Controller
+ *
+ *  Copyright (C) 2011 Atmel
+ *
+ *  Authors: Bo Shen <voice.shen@atmel.com>
+ *
+ *  Base on AT42QT2160 driver by:
+ *  Raphael Derosso Pereira <raphaelpereira@gmail.com>
+ *  Copyright (C) 2009
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+
+/* Address for each register */
+#define CHIP_ID            0x00
+#define QT1070_CHIP_ID     0x2E
+
+#define FW_VERSION         0x01
+#define QT1070_FW_VERSION  0x15
+
+#define DET_STATUS         0x02
+
+#define KEY_STATUS         0x03
+
+/* Calibrate */
+#define CALIBRATE_CMD      0x38
+#define QT1070_CAL_TIME    200
+
+/* Reset */
+#define RESET              0x39
+#define QT1070_RESET_TIME  255
+
+/* AT42QT1070 support up to 7 keys */
+static const unsigned short qt1070_key2code[] = {
+	KEY_0, KEY_1, KEY_2, KEY_3,
+	KEY_4, KEY_5, KEY_6,
+};
+
+struct qt1070_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	unsigned int irq;
+	unsigned short keycodes[ARRAY_SIZE(qt1070_key2code)];
+	u8 last_keys;
+};
+
+static int qt1070_read(struct i2c_client *client, u8 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"can not read register, returned %d\n", ret);
+
+	return ret;
+}
+
+static int qt1070_write(struct i2c_client *client, u8 reg, u8 data)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, data);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"can not write register, returned %d\n", ret);
+
+	return ret;
+}
+
+static bool qt1070_identify(struct i2c_client *client)
+{
+	int id, ver;
+
+	/* Read Chip ID */
+	id = qt1070_read(client, CHIP_ID);
+	if (id != QT1070_CHIP_ID) {
+		dev_err(&client->dev, "ID %d not supported\n", id);
+		return false;
+	}
+
+	/* Read firmware version */
+	ver = qt1070_read(client, FW_VERSION);
+	if (ver < 0) {
+		dev_err(&client->dev, "could not read the firmware version\n");
+		return false;
+	}
+
+	dev_info(&client->dev, "AT42QT1070 firmware version %x\n", ver);
+
+	return true;
+}
+
+static irqreturn_t qt1070_interrupt(int irq, void *dev_id)
+{
+	struct qt1070_data *data = dev_id;
+	struct i2c_client *client = data->client;
+	struct input_dev *input = data->input;
+	int i;
+	u8 new_keys, keyval, mask = 0x01;
+
+	/* Read the detected status register, thus clearing interrupt */
+	qt1070_read(client, DET_STATUS);
+
+	/* Read which key changed */
+	new_keys = qt1070_read(client, KEY_STATUS);
+
+	for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) {
+		keyval = new_keys & mask;
+		if ((data->last_keys & mask) != keyval)
+			input_report_key(input, data->keycodes[i], keyval);
+		mask <<= 1;
+	}
+	input_sync(input);
+
+	data->last_keys = new_keys;
+	return IRQ_HANDLED;
+}
+
+static int qt1070_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct qt1070_data *data;
+	struct input_dev *input;
+	int i;
+	int err;
+
+	err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE);
+	if (!err) {
+		dev_err(&client->dev, "%s adapter not supported\n",
+			dev_driver_string(&client->adapter->dev));
+		return -ENODEV;
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "please assign the irq to this device\n");
+		return -EINVAL;
+	}
+
+	/* Identify the qt1070 chip */
+	if (!qt1070_identify(client))
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct qt1070_data), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!data || !input) {
+		dev_err(&client->dev, "insufficient memory\n");
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->client = client;
+	data->input = input;
+	data->irq = client->irq;
+
+	input->name = "AT42QT1070 QTouch Sensor";
+	input->dev.parent = &client->dev;
+	input->id.bustype = BUS_I2C;
+
+	/* Add the keycode */
+	input->keycode = data->keycodes;
+	input->keycodesize = sizeof(data->keycodes[0]);
+	input->keycodemax = ARRAY_SIZE(qt1070_key2code);
+
+	__set_bit(EV_KEY, input->evbit);
+
+	for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) {
+		data->keycodes[i] = qt1070_key2code[i];
+		__set_bit(qt1070_key2code[i], input->keybit);
+	}
+
+	/* Calibrate device */
+	qt1070_write(client, CALIBRATE_CMD, 1);
+	msleep(QT1070_CAL_TIME);
+
+	/* Soft reset */
+	qt1070_write(client, RESET, 1);
+	msleep(QT1070_RESET_TIME);
+
+	err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
+				   IRQF_TRIGGER_NONE | IRQF_ONESHOT,
+				   client->dev.driver->name, data);
+	if (err) {
+		dev_err(&client->dev, "fail to request irq\n");
+		goto err_free_mem;
+	}
+
+	/* Register the input device */
+	err = input_register_device(data->input);
+	if (err) {
+		dev_err(&client->dev, "Failed to register input device\n");
+		goto err_free_irq;
+	}
+
+	i2c_set_clientdata(client, data);
+
+	/* Read to clear the chang line */
+	qt1070_read(client, DET_STATUS);
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	input_free_device(input);
+	kfree(data);
+	return err;
+}
+
+static int qt1070_remove(struct i2c_client *client)
+{
+	struct qt1070_data *data = i2c_get_clientdata(client);
+
+	/* Release IRQ */
+	free_irq(client->irq, data);
+
+	input_unregister_device(data->input);
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int qt1070_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct qt1070_data *data = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(data->irq);
+
+	return 0;
+}
+
+static int qt1070_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct qt1070_data *data = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(data->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(qt1070_pm_ops, qt1070_suspend, qt1070_resume);
+
+static const struct i2c_device_id qt1070_id[] = {
+	{ "qt1070", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, qt1070_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id qt1070_of_match[] = {
+	{ .compatible = "qt1070", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qt1070_of_match);
+#endif
+
+static struct i2c_driver qt1070_driver = {
+	.driver	= {
+		.name	= "qt1070",
+		.of_match_table = of_match_ptr(qt1070_of_match),
+		.pm	= &qt1070_pm_ops,
+	},
+	.id_table	= qt1070_id,
+	.probe		= qt1070_probe,
+	.remove		= qt1070_remove,
+};
+
+module_i2c_driver(qt1070_driver);
+
+MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
+MODULE_DESCRIPTION("Driver for AT42QT1070 QTouch sensor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
new file mode 100644
index 000000000..32d4a076e
--- /dev/null
+++ b/drivers/input/keyboard/qt2160.c
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  qt2160.c - Atmel AT42QT2160 Touch Sense Controller
+ *
+ *  Copyright (C) 2009 Raphael Derosso Pereira <raphaelpereira@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+
+#define QT2160_VALID_CHIPID  0x11
+
+#define QT2160_CMD_CHIPID     0
+#define QT2160_CMD_CODEVER    1
+#define QT2160_CMD_GSTAT      2
+#define QT2160_CMD_KEYS3      3
+#define QT2160_CMD_KEYS4      4
+#define QT2160_CMD_SLIDE      5
+#define QT2160_CMD_GPIOS      6
+#define QT2160_CMD_SUBVER     7
+#define QT2160_CMD_CALIBRATE  10
+#define QT2160_CMD_DRIVE_X    70
+#define QT2160_CMD_PWMEN_X    74
+#define QT2160_CMD_PWM_DUTY   76
+
+#define QT2160_NUM_LEDS_X	8
+
+#define QT2160_CYCLE_INTERVAL	(2*HZ)
+
+static unsigned char qt2160_key2code[] = {
+	KEY_0, KEY_1, KEY_2, KEY_3,
+	KEY_4, KEY_5, KEY_6, KEY_7,
+	KEY_8, KEY_9, KEY_A, KEY_B,
+	KEY_C, KEY_D, KEY_E, KEY_F,
+};
+
+#ifdef CONFIG_LEDS_CLASS
+struct qt2160_led {
+	struct qt2160_data *qt2160;
+	struct led_classdev cdev;
+	char name[32];
+	int id;
+	enum led_brightness brightness;
+};
+#endif
+
+struct qt2160_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct delayed_work dwork;
+	unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
+	u16 key_matrix;
+#ifdef CONFIG_LEDS_CLASS
+	struct qt2160_led leds[QT2160_NUM_LEDS_X];
+#endif
+};
+
+static int qt2160_read(struct i2c_client *client, u8 reg);
+static int qt2160_write(struct i2c_client *client, u8 reg, u8 data);
+
+#ifdef CONFIG_LEDS_CLASS
+
+static int qt2160_led_set(struct led_classdev *cdev,
+			  enum led_brightness value)
+{
+	struct qt2160_led *led = container_of(cdev, struct qt2160_led, cdev);
+	struct qt2160_data *qt2160 = led->qt2160;
+	struct i2c_client *client = qt2160->client;
+	u32 drive, pwmen;
+
+	if (value != led->brightness) {
+		drive = qt2160_read(client, QT2160_CMD_DRIVE_X);
+		pwmen = qt2160_read(client, QT2160_CMD_PWMEN_X);
+		if (value != LED_OFF) {
+			drive |= BIT(led->id);
+			pwmen |= BIT(led->id);
+
+		} else {
+			drive &= ~BIT(led->id);
+			pwmen &= ~BIT(led->id);
+		}
+		qt2160_write(client, QT2160_CMD_DRIVE_X, drive);
+		qt2160_write(client, QT2160_CMD_PWMEN_X, pwmen);
+
+		/*
+		 * Changing this register will change the brightness
+		 * of every LED in the qt2160. It's a HW limitation.
+		 */
+		if (value != LED_OFF)
+			qt2160_write(client, QT2160_CMD_PWM_DUTY, value);
+
+		led->brightness = value;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_LEDS_CLASS */
+
+static int qt2160_read_block(struct i2c_client *client,
+			     u8 inireg, u8 *buffer, unsigned int count)
+{
+	int error, idx = 0;
+
+	/*
+	 * Can't use SMBus block data read. Check for I2C functionality to speed
+	 * things up whenever possible. Otherwise we will be forced to read
+	 * sequentially.
+	 */
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))	{
+
+		error = i2c_smbus_write_byte(client, inireg + idx);
+		if (error) {
+			dev_err(&client->dev,
+				"couldn't send request. Returned %d\n", error);
+			return error;
+		}
+
+		error = i2c_master_recv(client, buffer, count);
+		if (error != count) {
+			dev_err(&client->dev,
+				"couldn't read registers. Returned %d bytes\n", error);
+			return error;
+		}
+	} else {
+
+		while (count--) {
+			int data;
+
+			error = i2c_smbus_write_byte(client, inireg + idx);
+			if (error) {
+				dev_err(&client->dev,
+					"couldn't send request. Returned %d\n", error);
+				return error;
+			}
+
+			data = i2c_smbus_read_byte(client);
+			if (data < 0) {
+				dev_err(&client->dev,
+					"couldn't read register. Returned %d\n", data);
+				return data;
+			}
+
+			buffer[idx++] = data;
+		}
+	}
+
+	return 0;
+}
+
+static int qt2160_get_key_matrix(struct qt2160_data *qt2160)
+{
+	struct i2c_client *client = qt2160->client;
+	struct input_dev *input = qt2160->input;
+	u8 regs[6];
+	u16 old_matrix, new_matrix;
+	int ret, i, mask;
+
+	dev_dbg(&client->dev, "requesting keys...\n");
+
+	/*
+	 * Read all registers from General Status Register
+	 * to GPIOs register
+	 */
+	ret = qt2160_read_block(client, QT2160_CMD_GSTAT, regs, 6);
+	if (ret) {
+		dev_err(&client->dev,
+			"could not perform chip read.\n");
+		return ret;
+	}
+
+	old_matrix = qt2160->key_matrix;
+	qt2160->key_matrix = new_matrix = (regs[2] << 8) | regs[1];
+
+	mask = 0x01;
+	for (i = 0; i < 16; ++i, mask <<= 1) {
+		int keyval = new_matrix & mask;
+
+		if ((old_matrix & mask) != keyval) {
+			input_report_key(input, qt2160->keycodes[i], keyval);
+			dev_dbg(&client->dev, "key %d %s\n",
+				i, keyval ? "pressed" : "released");
+		}
+	}
+
+	input_sync(input);
+
+	return 0;
+}
+
+static irqreturn_t qt2160_irq(int irq, void *_qt2160)
+{
+	struct qt2160_data *qt2160 = _qt2160;
+
+	mod_delayed_work(system_wq, &qt2160->dwork, 0);
+
+	return IRQ_HANDLED;
+}
+
+static void qt2160_schedule_read(struct qt2160_data *qt2160)
+{
+	schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL);
+}
+
+static void qt2160_worker(struct work_struct *work)
+{
+	struct qt2160_data *qt2160 =
+		container_of(work, struct qt2160_data, dwork.work);
+
+	dev_dbg(&qt2160->client->dev, "worker\n");
+
+	qt2160_get_key_matrix(qt2160);
+
+	/* Avoid device lock up by checking every so often */
+	qt2160_schedule_read(qt2160);
+}
+
+static int qt2160_read(struct i2c_client *client, u8 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte(client, reg);
+	if (ret) {
+		dev_err(&client->dev,
+			"couldn't send request. Returned %d\n", ret);
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte(client);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"couldn't read register. Returned %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int qt2160_write(struct i2c_client *client, u8 reg, u8 data)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, data);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"couldn't write data. Returned %d\n", ret);
+
+	return ret;
+}
+
+#ifdef CONFIG_LEDS_CLASS
+
+static int qt2160_register_leds(struct qt2160_data *qt2160)
+{
+	struct i2c_client *client = qt2160->client;
+	int ret;
+	int i;
+
+	for (i = 0; i < QT2160_NUM_LEDS_X; i++) {
+		struct qt2160_led *led = &qt2160->leds[i];
+
+		snprintf(led->name, sizeof(led->name), "qt2160:x%d", i);
+		led->cdev.name = led->name;
+		led->cdev.brightness_set_blocking = qt2160_led_set;
+		led->cdev.brightness = LED_OFF;
+		led->id = i;
+		led->qt2160 = qt2160;
+
+		ret = led_classdev_register(&client->dev, &led->cdev);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Tur off LEDs */
+	qt2160_write(client, QT2160_CMD_DRIVE_X, 0);
+	qt2160_write(client, QT2160_CMD_PWMEN_X, 0);
+	qt2160_write(client, QT2160_CMD_PWM_DUTY, 0);
+
+	return 0;
+}
+
+static void qt2160_unregister_leds(struct qt2160_data *qt2160)
+{
+	int i;
+
+	for (i = 0; i < QT2160_NUM_LEDS_X; i++)
+		led_classdev_unregister(&qt2160->leds[i].cdev);
+}
+
+#else
+
+static inline int qt2160_register_leds(struct qt2160_data *qt2160)
+{
+	return 0;
+}
+
+static inline void qt2160_unregister_leds(struct qt2160_data *qt2160)
+{
+}
+
+#endif
+
+static bool qt2160_identify(struct i2c_client *client)
+{
+	int id, ver, rev;
+
+	/* Read Chid ID to check if chip is valid */
+	id = qt2160_read(client, QT2160_CMD_CHIPID);
+	if (id != QT2160_VALID_CHIPID) {
+		dev_err(&client->dev, "ID %d not supported\n", id);
+		return false;
+	}
+
+	/* Read chip firmware version */
+	ver = qt2160_read(client, QT2160_CMD_CODEVER);
+	if (ver < 0) {
+		dev_err(&client->dev, "could not get firmware version\n");
+		return false;
+	}
+
+	/* Read chip firmware revision */
+	rev = qt2160_read(client, QT2160_CMD_SUBVER);
+	if (rev < 0) {
+		dev_err(&client->dev, "could not get firmware revision\n");
+		return false;
+	}
+
+	dev_info(&client->dev, "AT42QT2160 firmware version %d.%d.%d\n",
+			ver >> 4, ver & 0xf, rev);
+
+	return true;
+}
+
+static int qt2160_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct qt2160_data *qt2160;
+	struct input_dev *input;
+	int i;
+	int error;
+
+	/* Check functionality */
+	error = i2c_check_functionality(client->adapter,
+			I2C_FUNC_SMBUS_BYTE);
+	if (!error) {
+		dev_err(&client->dev, "%s adapter not supported\n",
+				dev_driver_string(&client->adapter->dev));
+		return -ENODEV;
+	}
+
+	if (!qt2160_identify(client))
+		return -ENODEV;
+
+	/* Chip is valid and active. Allocate structure */
+	qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!qt2160 || !input) {
+		dev_err(&client->dev, "insufficient memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	qt2160->client = client;
+	qt2160->input = input;
+	INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker);
+
+	input->name = "AT42QT2160 Touch Sense Keyboard";
+	input->id.bustype = BUS_I2C;
+
+	input->keycode = qt2160->keycodes;
+	input->keycodesize = sizeof(qt2160->keycodes[0]);
+	input->keycodemax = ARRAY_SIZE(qt2160_key2code);
+
+	__set_bit(EV_KEY, input->evbit);
+	__clear_bit(EV_REP, input->evbit);
+	for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) {
+		qt2160->keycodes[i] = qt2160_key2code[i];
+		__set_bit(qt2160_key2code[i], input->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	/* Calibrate device */
+	error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
+	if (error) {
+		dev_err(&client->dev, "failed to calibrate device\n");
+		goto err_free_mem;
+	}
+
+	if (client->irq) {
+		error = request_irq(client->irq, qt2160_irq,
+				    IRQF_TRIGGER_FALLING, "qt2160", qt2160);
+		if (error) {
+			dev_err(&client->dev,
+				"failed to allocate irq %d\n", client->irq);
+			goto err_free_mem;
+		}
+	}
+
+	error = qt2160_register_leds(qt2160);
+	if (error) {
+		dev_err(&client->dev, "Failed to register leds\n");
+		goto err_free_irq;
+	}
+
+	error = input_register_device(qt2160->input);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to register input device\n");
+		goto err_unregister_leds;
+	}
+
+	i2c_set_clientdata(client, qt2160);
+	qt2160_schedule_read(qt2160);
+
+	return 0;
+
+err_unregister_leds:
+	qt2160_unregister_leds(qt2160);
+err_free_irq:
+	if (client->irq)
+		free_irq(client->irq, qt2160);
+err_free_mem:
+	input_free_device(input);
+	kfree(qt2160);
+	return error;
+}
+
+static int qt2160_remove(struct i2c_client *client)
+{
+	struct qt2160_data *qt2160 = i2c_get_clientdata(client);
+
+	qt2160_unregister_leds(qt2160);
+
+	/* Release IRQ so no queue will be scheduled */
+	if (client->irq)
+		free_irq(client->irq, qt2160);
+
+	cancel_delayed_work_sync(&qt2160->dwork);
+
+	input_unregister_device(qt2160->input);
+	kfree(qt2160);
+
+	return 0;
+}
+
+static const struct i2c_device_id qt2160_idtable[] = {
+	{ "qt2160", 0, },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, qt2160_idtable);
+
+static struct i2c_driver qt2160_driver = {
+	.driver = {
+		.name	= "qt2160",
+	},
+
+	.id_table	= qt2160_idtable,
+	.probe		= qt2160_probe,
+	.remove		= qt2160_remove,
+};
+
+module_i2c_driver(qt2160_driver);
+
+MODULE_AUTHOR("Raphael Derosso Pereira <raphaelpereira@gmail.com>");
+MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
new file mode 100644
index 000000000..70c1d086b
--- /dev/null
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Samsung keypad driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/sched.h>
+#include <linux/input/samsung-keypad.h>
+
+#define SAMSUNG_KEYIFCON			0x00
+#define SAMSUNG_KEYIFSTSCLR			0x04
+#define SAMSUNG_KEYIFCOL			0x08
+#define SAMSUNG_KEYIFROW			0x0c
+#define SAMSUNG_KEYIFFC				0x10
+
+/* SAMSUNG_KEYIFCON */
+#define SAMSUNG_KEYIFCON_INT_F_EN		(1 << 0)
+#define SAMSUNG_KEYIFCON_INT_R_EN		(1 << 1)
+#define SAMSUNG_KEYIFCON_DF_EN			(1 << 2)
+#define SAMSUNG_KEYIFCON_FC_EN			(1 << 3)
+#define SAMSUNG_KEYIFCON_WAKEUPEN		(1 << 4)
+
+/* SAMSUNG_KEYIFSTSCLR */
+#define SAMSUNG_KEYIFSTSCLR_P_INT_MASK		(0xff << 0)
+#define SAMSUNG_KEYIFSTSCLR_R_INT_MASK		(0xff << 8)
+#define SAMSUNG_KEYIFSTSCLR_R_INT_OFFSET	8
+#define S5PV210_KEYIFSTSCLR_P_INT_MASK		(0x3fff << 0)
+#define S5PV210_KEYIFSTSCLR_R_INT_MASK		(0x3fff << 16)
+#define S5PV210_KEYIFSTSCLR_R_INT_OFFSET	16
+
+/* SAMSUNG_KEYIFCOL */
+#define SAMSUNG_KEYIFCOL_MASK			(0xff << 0)
+#define S5PV210_KEYIFCOLEN_MASK			(0xff << 8)
+
+/* SAMSUNG_KEYIFROW */
+#define SAMSUNG_KEYIFROW_MASK			(0xff << 0)
+#define S5PV210_KEYIFROW_MASK			(0x3fff << 0)
+
+/* SAMSUNG_KEYIFFC */
+#define SAMSUNG_KEYIFFC_MASK			(0x3ff << 0)
+
+enum samsung_keypad_type {
+	KEYPAD_TYPE_SAMSUNG,
+	KEYPAD_TYPE_S5PV210,
+};
+
+struct samsung_keypad {
+	struct input_dev *input_dev;
+	struct platform_device *pdev;
+	struct clk *clk;
+	void __iomem *base;
+	wait_queue_head_t wait;
+	bool stopped;
+	bool wake_enabled;
+	int irq;
+	enum samsung_keypad_type type;
+	unsigned int row_shift;
+	unsigned int rows;
+	unsigned int cols;
+	unsigned int row_state[SAMSUNG_MAX_COLS];
+	unsigned short keycodes[];
+};
+
+static void samsung_keypad_scan(struct samsung_keypad *keypad,
+				unsigned int *row_state)
+{
+	unsigned int col;
+	unsigned int val;
+
+	for (col = 0; col < keypad->cols; col++) {
+		if (keypad->type == KEYPAD_TYPE_S5PV210) {
+			val = S5PV210_KEYIFCOLEN_MASK;
+			val &= ~(1 << col) << 8;
+		} else {
+			val = SAMSUNG_KEYIFCOL_MASK;
+			val &= ~(1 << col);
+		}
+
+		writel(val, keypad->base + SAMSUNG_KEYIFCOL);
+		mdelay(1);
+
+		val = readl(keypad->base + SAMSUNG_KEYIFROW);
+		row_state[col] = ~val & ((1 << keypad->rows) - 1);
+	}
+
+	/* KEYIFCOL reg clear */
+	writel(0, keypad->base + SAMSUNG_KEYIFCOL);
+}
+
+static bool samsung_keypad_report(struct samsung_keypad *keypad,
+				  unsigned int *row_state)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	unsigned int changed;
+	unsigned int pressed;
+	unsigned int key_down = 0;
+	unsigned int val;
+	unsigned int col, row;
+
+	for (col = 0; col < keypad->cols; col++) {
+		changed = row_state[col] ^ keypad->row_state[col];
+		key_down |= row_state[col];
+		if (!changed)
+			continue;
+
+		for (row = 0; row < keypad->rows; row++) {
+			if (!(changed & (1 << row)))
+				continue;
+
+			pressed = row_state[col] & (1 << row);
+
+			dev_dbg(&keypad->input_dev->dev,
+				"key %s, row: %d, col: %d\n",
+				pressed ? "pressed" : "released", row, col);
+
+			val = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+
+			input_event(input_dev, EV_MSC, MSC_SCAN, val);
+			input_report_key(input_dev,
+					keypad->keycodes[val], pressed);
+		}
+		input_sync(keypad->input_dev);
+	}
+
+	memcpy(keypad->row_state, row_state, sizeof(keypad->row_state));
+
+	return key_down;
+}
+
+static irqreturn_t samsung_keypad_irq(int irq, void *dev_id)
+{
+	struct samsung_keypad *keypad = dev_id;
+	unsigned int row_state[SAMSUNG_MAX_COLS];
+	unsigned int val;
+	bool key_down;
+
+	pm_runtime_get_sync(&keypad->pdev->dev);
+
+	do {
+		val = readl(keypad->base + SAMSUNG_KEYIFSTSCLR);
+		/* Clear interrupt. */
+		writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR);
+
+		samsung_keypad_scan(keypad, row_state);
+
+		key_down = samsung_keypad_report(keypad, row_state);
+		if (key_down)
+			wait_event_timeout(keypad->wait, keypad->stopped,
+					   msecs_to_jiffies(50));
+
+	} while (key_down && !keypad->stopped);
+
+	pm_runtime_put(&keypad->pdev->dev);
+
+	return IRQ_HANDLED;
+}
+
+static void samsung_keypad_start(struct samsung_keypad *keypad)
+{
+	unsigned int val;
+
+	pm_runtime_get_sync(&keypad->pdev->dev);
+
+	/* Tell IRQ thread that it may poll the device. */
+	keypad->stopped = false;
+
+	clk_enable(keypad->clk);
+
+	/* Enable interrupt bits. */
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	val |= SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN;
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	/* KEYIFCOL reg clear. */
+	writel(0, keypad->base + SAMSUNG_KEYIFCOL);
+
+	pm_runtime_put(&keypad->pdev->dev);
+}
+
+static void samsung_keypad_stop(struct samsung_keypad *keypad)
+{
+	unsigned int val;
+
+	pm_runtime_get_sync(&keypad->pdev->dev);
+
+	/* Signal IRQ thread to stop polling and disable the handler. */
+	keypad->stopped = true;
+	wake_up(&keypad->wait);
+	disable_irq(keypad->irq);
+
+	/* Clear interrupt. */
+	writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR);
+
+	/* Disable interrupt bits. */
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	val &= ~(SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN);
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	clk_disable(keypad->clk);
+
+	/*
+	 * Now that chip should not generate interrupts we can safely
+	 * re-enable the handler.
+	 */
+	enable_irq(keypad->irq);
+
+	pm_runtime_put(&keypad->pdev->dev);
+}
+
+static int samsung_keypad_open(struct input_dev *input_dev)
+{
+	struct samsung_keypad *keypad = input_get_drvdata(input_dev);
+
+	samsung_keypad_start(keypad);
+
+	return 0;
+}
+
+static void samsung_keypad_close(struct input_dev *input_dev)
+{
+	struct samsung_keypad *keypad = input_get_drvdata(input_dev);
+
+	samsung_keypad_stop(keypad);
+}
+
+#ifdef CONFIG_OF
+static struct samsung_keypad_platdata *
+samsung_keypad_parse_dt(struct device *dev)
+{
+	struct samsung_keypad_platdata *pdata;
+	struct matrix_keymap_data *keymap_data;
+	uint32_t *keymap, num_rows = 0, num_cols = 0;
+	struct device_node *np = dev->of_node, *key_np;
+	unsigned int key_count;
+
+	if (!np) {
+		dev_err(dev, "missing device tree data\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "could not allocate memory for platform data\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows);
+	of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols);
+	if (!num_rows || !num_cols) {
+		dev_err(dev, "number of keypad rows/columns not specified\n");
+		return ERR_PTR(-EINVAL);
+	}
+	pdata->rows = num_rows;
+	pdata->cols = num_cols;
+
+	keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL);
+	if (!keymap_data) {
+		dev_err(dev, "could not allocate memory for keymap data\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	pdata->keymap_data = keymap_data;
+
+	key_count = of_get_child_count(np);
+	keymap_data->keymap_size = key_count;
+	keymap = devm_kcalloc(dev, key_count, sizeof(uint32_t), GFP_KERNEL);
+	if (!keymap) {
+		dev_err(dev, "could not allocate memory for keymap\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	keymap_data->keymap = keymap;
+
+	for_each_child_of_node(np, key_np) {
+		u32 row, col, key_code;
+		of_property_read_u32(key_np, "keypad,row", &row);
+		of_property_read_u32(key_np, "keypad,column", &col);
+		of_property_read_u32(key_np, "linux,code", &key_code);
+		*keymap++ = KEY(row, col, key_code);
+	}
+
+	if (of_get_property(np, "linux,input-no-autorepeat", NULL))
+		pdata->no_autorepeat = true;
+
+	pdata->wakeup = of_property_read_bool(np, "wakeup-source") ||
+			/* legacy name */
+			of_property_read_bool(np, "linux,input-wakeup");
+
+
+	return pdata;
+}
+#else
+static struct samsung_keypad_platdata *
+samsung_keypad_parse_dt(struct device *dev)
+{
+	dev_err(dev, "no platform data defined\n");
+
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
+static int samsung_keypad_probe(struct platform_device *pdev)
+{
+	const struct samsung_keypad_platdata *pdata;
+	const struct matrix_keymap_data *keymap_data;
+	struct samsung_keypad *keypad;
+	struct resource *res;
+	struct input_dev *input_dev;
+	unsigned int row_shift;
+	unsigned int keymap_size;
+	int error;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		pdata = samsung_keypad_parse_dt(&pdev->dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
+	keymap_data = pdata->keymap_data;
+	if (!keymap_data) {
+		dev_err(&pdev->dev, "no keymap data defined\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->rows || pdata->rows > SAMSUNG_MAX_ROWS)
+		return -EINVAL;
+
+	if (!pdata->cols || pdata->cols > SAMSUNG_MAX_COLS)
+		return -EINVAL;
+
+	/* initialize the gpio */
+	if (pdata->cfg_gpio)
+		pdata->cfg_gpio(pdata->rows, pdata->cols);
+
+	row_shift = get_count_order(pdata->cols);
+	keymap_size = (pdata->rows << row_shift) * sizeof(keypad->keycodes[0]);
+
+	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad) + keymap_size,
+			      GFP_KERNEL);
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!keypad || !input_dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	keypad->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!keypad->base)
+		return -EBUSY;
+
+	keypad->clk = devm_clk_get(&pdev->dev, "keypad");
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get keypad clk\n");
+		return PTR_ERR(keypad->clk);
+	}
+
+	error = clk_prepare(keypad->clk);
+	if (error) {
+		dev_err(&pdev->dev, "keypad clock prepare failed\n");
+		return error;
+	}
+
+	keypad->input_dev = input_dev;
+	keypad->pdev = pdev;
+	keypad->row_shift = row_shift;
+	keypad->rows = pdata->rows;
+	keypad->cols = pdata->cols;
+	keypad->stopped = true;
+	init_waitqueue_head(&keypad->wait);
+
+	if (pdev->dev.of_node)
+		keypad->type = of_device_is_compatible(pdev->dev.of_node,
+					"samsung,s5pv210-keypad");
+	else
+		keypad->type = platform_get_device_id(pdev)->driver_data;
+
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->open = samsung_keypad_open;
+	input_dev->close = samsung_keypad_close;
+
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   pdata->rows, pdata->cols,
+					   keypad->keycodes, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_unprepare_clk;
+	}
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	if (!pdata->no_autorepeat)
+		__set_bit(EV_REP, input_dev->evbit);
+
+	input_set_drvdata(input_dev, keypad);
+
+	keypad->irq = platform_get_irq(pdev, 0);
+	if (keypad->irq < 0) {
+		error = keypad->irq;
+		goto err_unprepare_clk;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, keypad->irq, NULL,
+					  samsung_keypad_irq, IRQF_ONESHOT,
+					  dev_name(&pdev->dev), keypad);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register keypad interrupt\n");
+		goto err_unprepare_clk;
+	}
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+	platform_set_drvdata(pdev, keypad);
+	pm_runtime_enable(&pdev->dev);
+
+	error = input_register_device(keypad->input_dev);
+	if (error)
+		goto err_disable_runtime_pm;
+
+	if (pdev->dev.of_node) {
+		devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap);
+		devm_kfree(&pdev->dev, (void *)pdata->keymap_data);
+		devm_kfree(&pdev->dev, (void *)pdata);
+	}
+	return 0;
+
+err_disable_runtime_pm:
+	pm_runtime_disable(&pdev->dev);
+err_unprepare_clk:
+	clk_unprepare(keypad->clk);
+	return error;
+}
+
+static int samsung_keypad_remove(struct platform_device *pdev)
+{
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+
+	input_unregister_device(keypad->input_dev);
+
+	clk_unprepare(keypad->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int samsung_keypad_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+	unsigned int val;
+	int error;
+
+	if (keypad->stopped)
+		return 0;
+
+	/* This may fail on some SoCs due to lack of controller support */
+	error = enable_irq_wake(keypad->irq);
+	if (!error)
+		keypad->wake_enabled = true;
+
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	val |= SAMSUNG_KEYIFCON_WAKEUPEN;
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	clk_disable(keypad->clk);
+
+	return 0;
+}
+
+static int samsung_keypad_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+	unsigned int val;
+
+	if (keypad->stopped)
+		return 0;
+
+	clk_enable(keypad->clk);
+
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	val &= ~SAMSUNG_KEYIFCON_WAKEUPEN;
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	if (keypad->wake_enabled)
+		disable_irq_wake(keypad->irq);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad,
+					 bool enable)
+{
+	unsigned int val;
+
+	clk_enable(keypad->clk);
+
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	if (enable) {
+		val |= SAMSUNG_KEYIFCON_WAKEUPEN;
+		if (device_may_wakeup(&keypad->pdev->dev))
+			enable_irq_wake(keypad->irq);
+	} else {
+		val &= ~SAMSUNG_KEYIFCON_WAKEUPEN;
+		if (device_may_wakeup(&keypad->pdev->dev))
+			disable_irq_wake(keypad->irq);
+	}
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	clk_disable(keypad->clk);
+}
+
+static int samsung_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		samsung_keypad_stop(keypad);
+
+	samsung_keypad_toggle_wakeup(keypad, true);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int samsung_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	samsung_keypad_toggle_wakeup(keypad, false);
+
+	if (input_dev->users)
+		samsung_keypad_start(keypad);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops samsung_keypad_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(samsung_keypad_suspend, samsung_keypad_resume)
+	SET_RUNTIME_PM_OPS(samsung_keypad_runtime_suspend,
+			   samsung_keypad_runtime_resume, NULL)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_keypad_dt_match[] = {
+	{ .compatible = "samsung,s3c6410-keypad" },
+	{ .compatible = "samsung,s5pv210-keypad" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_keypad_dt_match);
+#endif
+
+static const struct platform_device_id samsung_keypad_driver_ids[] = {
+	{
+		.name		= "samsung-keypad",
+		.driver_data	= KEYPAD_TYPE_SAMSUNG,
+	}, {
+		.name		= "s5pv210-keypad",
+		.driver_data	= KEYPAD_TYPE_S5PV210,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, samsung_keypad_driver_ids);
+
+static struct platform_driver samsung_keypad_driver = {
+	.probe		= samsung_keypad_probe,
+	.remove		= samsung_keypad_remove,
+	.driver		= {
+		.name	= "samsung-keypad",
+		.of_match_table = of_match_ptr(samsung_keypad_dt_match),
+		.pm	= &samsung_keypad_pm_ops,
+	},
+	.id_table	= samsung_keypad_driver_ids,
+};
+module_platform_driver(samsung_keypad_driver);
+
+MODULE_DESCRIPTION("Samsung keypad driver");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
new file mode 100644
index 000000000..c155adebf
--- /dev/null
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SuperH KEYSC Keypad Driver
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on gpio_keys.c, Copyright 2005 Phil Blundell
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/bitmap.h>
+#include <linux/pm_runtime.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+static const struct {
+	unsigned char kymd, keyout, keyin;
+} sh_keysc_mode[] = {
+	[SH_KEYSC_MODE_1] = { 0, 6, 5 },
+	[SH_KEYSC_MODE_2] = { 1, 5, 6 },
+	[SH_KEYSC_MODE_3] = { 2, 4, 7 },
+	[SH_KEYSC_MODE_4] = { 3, 6, 6 },
+	[SH_KEYSC_MODE_5] = { 4, 6, 7 },
+	[SH_KEYSC_MODE_6] = { 5, 8, 8 },
+};
+
+struct sh_keysc_priv {
+	void __iomem *iomem_base;
+	DECLARE_BITMAP(last_keys, SH_KEYSC_MAXKEYS);
+	struct input_dev *input;
+	struct sh_keysc_info pdata;
+};
+
+#define KYCR1 0
+#define KYCR2 1
+#define KYINDR 2
+#define KYOUTDR 3
+
+#define KYCR2_IRQ_LEVEL    0x10
+#define KYCR2_IRQ_DISABLED 0x00
+
+static unsigned long sh_keysc_read(struct sh_keysc_priv *p, int reg_nr)
+{
+	return ioread16(p->iomem_base + (reg_nr << 2));
+}
+
+static void sh_keysc_write(struct sh_keysc_priv *p, int reg_nr,
+			   unsigned long value)
+{
+	iowrite16(value, p->iomem_base + (reg_nr << 2));
+}
+
+static void sh_keysc_level_mode(struct sh_keysc_priv *p,
+				unsigned long keys_set)
+{
+	struct sh_keysc_info *pdata = &p->pdata;
+
+	sh_keysc_write(p, KYOUTDR, 0);
+	sh_keysc_write(p, KYCR2, KYCR2_IRQ_LEVEL | (keys_set << 8));
+
+	if (pdata->kycr2_delay)
+		udelay(pdata->kycr2_delay);
+}
+
+static void sh_keysc_map_dbg(struct device *dev, unsigned long *map,
+			     const char *str)
+{
+	int k;
+
+	for (k = 0; k < BITS_TO_LONGS(SH_KEYSC_MAXKEYS); k++)
+		dev_dbg(dev, "%s[%d] 0x%lx\n", str, k, map[k]);
+}
+
+static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
+	struct sh_keysc_info *pdata = &priv->pdata;
+	int keyout_nr = sh_keysc_mode[pdata->mode].keyout;
+	int keyin_nr = sh_keysc_mode[pdata->mode].keyin;
+	DECLARE_BITMAP(keys, SH_KEYSC_MAXKEYS);
+	DECLARE_BITMAP(keys0, SH_KEYSC_MAXKEYS);
+	DECLARE_BITMAP(keys1, SH_KEYSC_MAXKEYS);
+	unsigned char keyin_set, tmp;
+	int i, k, n;
+
+	dev_dbg(&pdev->dev, "isr!\n");
+
+	bitmap_fill(keys1, SH_KEYSC_MAXKEYS);
+	bitmap_zero(keys0, SH_KEYSC_MAXKEYS);
+
+	do {
+		bitmap_zero(keys, SH_KEYSC_MAXKEYS);
+		keyin_set = 0;
+
+		sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
+
+		for (i = 0; i < keyout_nr; i++) {
+			n = keyin_nr * i;
+
+			/* drive one KEYOUT pin low, read KEYIN pins */
+			sh_keysc_write(priv, KYOUTDR, 0xffff ^ (3 << (i * 2)));
+			udelay(pdata->delay);
+			tmp = sh_keysc_read(priv, KYINDR);
+
+			/* set bit if key press has been detected */
+			for (k = 0; k < keyin_nr; k++) {
+				if (tmp & (1 << k))
+					__set_bit(n + k, keys);
+			}
+
+			/* keep track of which KEYIN bits that have been set */
+			keyin_set |= tmp ^ ((1 << keyin_nr) - 1);
+		}
+
+		sh_keysc_level_mode(priv, keyin_set);
+
+		bitmap_complement(keys, keys, SH_KEYSC_MAXKEYS);
+		bitmap_and(keys1, keys1, keys, SH_KEYSC_MAXKEYS);
+		bitmap_or(keys0, keys0, keys, SH_KEYSC_MAXKEYS);
+
+		sh_keysc_map_dbg(&pdev->dev, keys, "keys");
+
+	} while (sh_keysc_read(priv, KYCR2) & 0x01);
+
+	sh_keysc_map_dbg(&pdev->dev, priv->last_keys, "last_keys");
+	sh_keysc_map_dbg(&pdev->dev, keys0, "keys0");
+	sh_keysc_map_dbg(&pdev->dev, keys1, "keys1");
+
+	for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
+		k = pdata->keycodes[i];
+		if (!k)
+			continue;
+
+		if (test_bit(i, keys0) == test_bit(i, priv->last_keys))
+			continue;
+
+		if (test_bit(i, keys1) || test_bit(i, keys0)) {
+			input_event(priv->input, EV_KEY, k, 1);
+			__set_bit(i, priv->last_keys);
+		}
+
+		if (!test_bit(i, keys1)) {
+			input_event(priv->input, EV_KEY, k, 0);
+			__clear_bit(i, priv->last_keys);
+		}
+
+	}
+	input_sync(priv->input);
+
+	return IRQ_HANDLED;
+}
+
+static int sh_keysc_probe(struct platform_device *pdev)
+{
+	struct sh_keysc_priv *priv;
+	struct sh_keysc_info *pdata;
+	struct resource *res;
+	struct input_dev *input;
+	int i;
+	int irq, error;
+
+	if (!dev_get_platdata(&pdev->dev)) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		error = -EINVAL;
+		goto err0;
+	}
+
+	error = -ENXIO;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to get I/O memory\n");
+		goto err0;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		goto err0;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (priv == NULL) {
+		dev_err(&pdev->dev, "failed to allocate driver data\n");
+		error = -ENOMEM;
+		goto err0;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	memcpy(&priv->pdata, dev_get_platdata(&pdev->dev), sizeof(priv->pdata));
+	pdata = &priv->pdata;
+
+	priv->iomem_base = ioremap(res->start, resource_size(res));
+	if (priv->iomem_base == NULL) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		error = -ENXIO;
+		goto err1;
+	}
+
+	priv->input = input_allocate_device();
+	if (!priv->input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		error = -ENOMEM;
+		goto err2;
+	}
+
+	input = priv->input;
+	input->evbit[0] = BIT_MASK(EV_KEY);
+
+	input->name = pdev->name;
+	input->phys = "sh-keysc-keys/input0";
+	input->dev.parent = &pdev->dev;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	input->keycode = pdata->keycodes;
+	input->keycodesize = sizeof(pdata->keycodes[0]);
+	input->keycodemax = ARRAY_SIZE(pdata->keycodes);
+
+	error = request_threaded_irq(irq, NULL, sh_keysc_isr, IRQF_ONESHOT,
+				     dev_name(&pdev->dev), pdev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		goto err3;
+	}
+
+	for (i = 0; i < SH_KEYSC_MAXKEYS; i++)
+		__set_bit(pdata->keycodes[i], input->keybit);
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto err4;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	sh_keysc_write(priv, KYCR1, (sh_keysc_mode[pdata->mode].kymd << 8) |
+		       pdata->scan_timing);
+	sh_keysc_level_mode(priv, 0);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+
+ err4:
+	free_irq(irq, pdev);
+ err3:
+	input_free_device(input);
+ err2:
+	iounmap(priv->iomem_base);
+ err1:
+	kfree(priv);
+ err0:
+	return error;
+}
+
+static int sh_keysc_remove(struct platform_device *pdev)
+{
+	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
+
+	sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
+
+	input_unregister_device(priv->input);
+	free_irq(platform_get_irq(pdev, 0), pdev);
+	iounmap(priv->iomem_base);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	kfree(priv);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sh_keysc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+	unsigned short value;
+
+	value = sh_keysc_read(priv, KYCR1);
+
+	if (device_may_wakeup(dev)) {
+		sh_keysc_write(priv, KYCR1, value | 0x80);
+		enable_irq_wake(irq);
+	} else {
+		sh_keysc_write(priv, KYCR1, value & ~0x80);
+		pm_runtime_put_sync(dev);
+	}
+
+	return 0;
+}
+
+static int sh_keysc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(irq);
+	else
+		pm_runtime_get_sync(dev);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sh_keysc_dev_pm_ops,
+			 sh_keysc_suspend, sh_keysc_resume);
+
+static struct platform_driver sh_keysc_device_driver = {
+	.probe		= sh_keysc_probe,
+	.remove		= sh_keysc_remove,
+	.driver		= {
+		.name	= "sh_keysc",
+		.pm	= &sh_keysc_dev_pm_ops,
+	}
+};
+module_platform_driver(sh_keysc_device_driver);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
new file mode 100644
index 000000000..ad8660be0
--- /dev/null
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Driver for the IMX SNVS ON/OFF Power Key
+// Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved.
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#define SNVS_HPVIDR1_REG	0xBF8
+#define SNVS_LPSR_REG		0x4C	/* LP Status Register */
+#define SNVS_LPCR_REG		0x38	/* LP Control Register */
+#define SNVS_HPSR_REG		0x14
+#define SNVS_HPSR_BTN		BIT(6)
+#define SNVS_LPSR_SPO		BIT(18)
+#define SNVS_LPCR_DEP_EN	BIT(5)
+
+#define DEBOUNCE_TIME		30
+#define REPEAT_INTERVAL		60
+
+struct pwrkey_drv_data {
+	struct regmap *snvs;
+	int irq;
+	int keycode;
+	int keystate;  /* 1:pressed */
+	int wakeup;
+	struct timer_list check_timer;
+	struct input_dev *input;
+	u8 minor_rev;
+};
+
+static void imx_imx_snvs_check_for_events(struct timer_list *t)
+{
+	struct pwrkey_drv_data *pdata = from_timer(pdata, t, check_timer);
+	struct input_dev *input = pdata->input;
+	u32 state;
+
+	regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
+	state = state & SNVS_HPSR_BTN ? 1 : 0;
+
+	/* only report new event if status changed */
+	if (state ^ pdata->keystate) {
+		pdata->keystate = state;
+		input_event(input, EV_KEY, pdata->keycode, state);
+		input_sync(input);
+		pm_relax(pdata->input->dev.parent);
+	}
+
+	/* repeat check if pressed long */
+	if (state) {
+		mod_timer(&pdata->check_timer,
+			  jiffies + msecs_to_jiffies(REPEAT_INTERVAL));
+	}
+}
+
+static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+	struct input_dev *input = pdata->input;
+	u32 lp_status;
+
+	pm_wakeup_event(input->dev.parent, 0);
+
+	regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
+	if (lp_status & SNVS_LPSR_SPO) {
+		if (pdata->minor_rev == 0) {
+			/*
+			 * The first generation i.MX6 SoCs only sends an
+			 * interrupt on button release. To mimic power-key
+			 * usage, we'll prepend a press event.
+			 */
+			input_report_key(input, pdata->keycode, 1);
+			input_sync(input);
+			input_report_key(input, pdata->keycode, 0);
+			input_sync(input);
+			pm_relax(input->dev.parent);
+		} else {
+			mod_timer(&pdata->check_timer,
+			          jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+		}
+	}
+
+	/* clear SPO status */
+	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
+
+	return IRQ_HANDLED;
+}
+
+static void imx_snvs_pwrkey_disable_clk(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static void imx_snvs_pwrkey_act(void *pdata)
+{
+	struct pwrkey_drv_data *pd = pdata;
+
+	del_timer_sync(&pd->check_timer);
+}
+
+static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
+{
+	struct pwrkey_drv_data *pdata;
+	struct input_dev *input;
+	struct device_node *np;
+	struct clk *clk;
+	int error;
+	u32 vid;
+
+	/* Get SNVS register Page */
+	np = pdev->dev.of_node;
+	if (!np)
+		return -ENODEV;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->snvs = syscon_regmap_lookup_by_phandle(np, "regmap");
+	if (IS_ERR(pdata->snvs)) {
+		dev_err(&pdev->dev, "Can't get snvs syscon\n");
+		return PTR_ERR(pdata->snvs);
+	}
+
+	if (of_property_read_u32(np, "linux,keycode", &pdata->keycode)) {
+		pdata->keycode = KEY_POWER;
+		dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n");
+	}
+
+	clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Failed to get snvs clock (%pe)\n", clk);
+		return PTR_ERR(clk);
+	}
+
+	error = clk_prepare_enable(clk);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to enable snvs clock (%pe)\n",
+			ERR_PTR(error));
+		return error;
+	}
+
+	error = devm_add_action_or_reset(&pdev->dev,
+					 imx_snvs_pwrkey_disable_clk, clk);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to register clock cleanup handler (%pe)\n",
+			ERR_PTR(error));
+		return error;
+	}
+
+	pdata->wakeup = of_property_read_bool(np, "wakeup-source");
+
+	pdata->irq = platform_get_irq(pdev, 0);
+	if (pdata->irq < 0)
+		return -EINVAL;
+
+	regmap_read(pdata->snvs, SNVS_HPVIDR1_REG, &vid);
+	pdata->minor_rev = vid & 0xff;
+
+	regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN);
+
+	/* clear the unexpected interrupt before driver ready */
+	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
+
+	timer_setup(&pdata->check_timer, imx_imx_snvs_check_for_events, 0);
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	input->name = pdev->name;
+	input->phys = "snvs-pwrkey/input0";
+	input->id.bustype = BUS_HOST;
+
+	input_set_capability(input, EV_KEY, pdata->keycode);
+
+	/* input customer action to cancel release timer */
+	error = devm_add_action(&pdev->dev, imx_snvs_pwrkey_act, pdata);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register remove action\n");
+		return error;
+	}
+
+	pdata->input = input;
+	platform_set_drvdata(pdev, pdata);
+
+	error = devm_request_irq(&pdev->dev, pdata->irq,
+			       imx_snvs_pwrkey_interrupt,
+			       0, pdev->name, pdev);
+
+	if (error) {
+		dev_err(&pdev->dev, "interrupt not available.\n");
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error < 0) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+	error = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
+	if (error)
+		dev_err(&pdev->dev, "irq wake enable failed.\n");
+
+	return 0;
+}
+
+static const struct of_device_id imx_snvs_pwrkey_ids[] = {
+	{ .compatible = "fsl,sec-v4.0-pwrkey" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_snvs_pwrkey_ids);
+
+static struct platform_driver imx_snvs_pwrkey_driver = {
+	.driver = {
+		.name = "snvs_pwrkey",
+		.of_match_table = imx_snvs_pwrkey_ids,
+	},
+	.probe = imx_snvs_pwrkey_probe,
+};
+module_platform_driver(imx_snvs_pwrkey_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("i.MX snvs power key Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
new file mode 100644
index 000000000..9b8d78f87
--- /dev/null
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -0,0 +1,390 @@
+/*
+ * SPEAr Keyboard Driver
+ * Based on omap-keypad driver
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar <rajeevkumar.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeup.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/platform_data/keyboard-spear.h>
+
+/* Keyboard Registers */
+#define MODE_CTL_REG	0x00
+#define STATUS_REG	0x0C
+#define DATA_REG	0x10
+#define INTR_MASK	0x54
+
+/* Register Values */
+#define NUM_ROWS	16
+#define NUM_COLS	16
+#define MODE_CTL_PCLK_FREQ_SHIFT	9
+#define MODE_CTL_PCLK_FREQ_MSK		0x7F
+
+#define MODE_CTL_KEYBOARD	(0x2 << 0)
+#define MODE_CTL_SCAN_RATE_10	(0x0 << 2)
+#define MODE_CTL_SCAN_RATE_20	(0x1 << 2)
+#define MODE_CTL_SCAN_RATE_40	(0x2 << 2)
+#define MODE_CTL_SCAN_RATE_80	(0x3 << 2)
+#define MODE_CTL_KEYNUM_SHIFT	6
+#define MODE_CTL_START_SCAN	(0x1 << 8)
+
+#define STATUS_DATA_AVAIL	(0x1 << 1)
+
+#define DATA_ROW_MASK		0xF0
+#define DATA_COLUMN_MASK	0x0F
+
+#define ROW_SHIFT		4
+
+struct spear_kbd {
+	struct input_dev *input;
+	void __iomem *io_base;
+	struct clk *clk;
+	unsigned int irq;
+	unsigned int mode;
+	unsigned int suspended_rate;
+	unsigned short last_key;
+	unsigned short keycodes[NUM_ROWS * NUM_COLS];
+	bool rep;
+	bool irq_wake_enabled;
+	u32 mode_ctl_reg;
+};
+
+static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
+{
+	struct spear_kbd *kbd = dev_id;
+	struct input_dev *input = kbd->input;
+	unsigned int key;
+	u32 sts, val;
+
+	sts = readl_relaxed(kbd->io_base + STATUS_REG);
+	if (!(sts & STATUS_DATA_AVAIL))
+		return IRQ_NONE;
+
+	if (kbd->last_key != KEY_RESERVED) {
+		input_report_key(input, kbd->last_key, 0);
+		kbd->last_key = KEY_RESERVED;
+	}
+
+	/* following reads active (row, col) pair */
+	val = readl_relaxed(kbd->io_base + DATA_REG) &
+		(DATA_ROW_MASK | DATA_COLUMN_MASK);
+	key = kbd->keycodes[val];
+
+	input_event(input, EV_MSC, MSC_SCAN, val);
+	input_report_key(input, key, 1);
+	input_sync(input);
+
+	kbd->last_key = key;
+
+	/* clear interrupt */
+	writel_relaxed(0, kbd->io_base + STATUS_REG);
+
+	return IRQ_HANDLED;
+}
+
+static int spear_kbd_open(struct input_dev *dev)
+{
+	struct spear_kbd *kbd = input_get_drvdata(dev);
+	int error;
+	u32 val;
+
+	kbd->last_key = KEY_RESERVED;
+
+	error = clk_enable(kbd->clk);
+	if (error)
+		return error;
+
+	/* keyboard rate to be programmed is input clock (in MHz) - 1 */
+	val = clk_get_rate(kbd->clk) / 1000000 - 1;
+	val = (val & MODE_CTL_PCLK_FREQ_MSK) << MODE_CTL_PCLK_FREQ_SHIFT;
+
+	/* program keyboard */
+	val = MODE_CTL_SCAN_RATE_80 | MODE_CTL_KEYBOARD | val |
+		(kbd->mode << MODE_CTL_KEYNUM_SHIFT);
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+	writel_relaxed(1, kbd->io_base + STATUS_REG);
+
+	/* start key scan */
+	val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+	val |= MODE_CTL_START_SCAN;
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+
+	return 0;
+}
+
+static void spear_kbd_close(struct input_dev *dev)
+{
+	struct spear_kbd *kbd = input_get_drvdata(dev);
+	u32 val;
+
+	/* stop key scan */
+	val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+	val &= ~MODE_CTL_START_SCAN;
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+
+	clk_disable(kbd->clk);
+
+	kbd->last_key = KEY_RESERVED;
+}
+
+#ifdef CONFIG_OF
+static int spear_kbd_parse_dt(struct platform_device *pdev,
+                                        struct spear_kbd *kbd)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int error;
+	u32 val, suspended_rate;
+
+	if (!np) {
+		dev_err(&pdev->dev, "Missing DT data\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_bool(np, "autorepeat"))
+		kbd->rep = true;
+
+	if (of_property_read_u32(np, "suspended_rate", &suspended_rate))
+		kbd->suspended_rate = suspended_rate;
+
+	error = of_property_read_u32(np, "st,mode", &val);
+	if (error) {
+		dev_err(&pdev->dev, "DT: Invalid or missing mode\n");
+		return error;
+	}
+
+	kbd->mode = val;
+	return 0;
+}
+#else
+static inline int spear_kbd_parse_dt(struct platform_device *pdev,
+				     struct spear_kbd *kbd)
+{
+	return -ENOSYS;
+}
+#endif
+
+static int spear_kbd_probe(struct platform_device *pdev)
+{
+	struct kbd_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	const struct matrix_keymap_data *keymap = pdata ? pdata->keymap : NULL;
+	struct spear_kbd *kbd;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq;
+	int error;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	kbd = devm_kzalloc(&pdev->dev, sizeof(*kbd), GFP_KERNEL);
+	if (!kbd) {
+		dev_err(&pdev->dev, "not enough memory for driver data\n");
+		return -ENOMEM;
+	}
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	kbd->input = input_dev;
+	kbd->irq = irq;
+
+	if (!pdata) {
+		error = spear_kbd_parse_dt(pdev, kbd);
+		if (error)
+			return error;
+	} else {
+		kbd->mode = pdata->mode;
+		kbd->rep = pdata->rep;
+		kbd->suspended_rate = pdata->suspended_rate;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	kbd->io_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kbd->io_base))
+		return PTR_ERR(kbd->io_base);
+
+	kbd->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kbd->clk))
+		return PTR_ERR(kbd->clk);
+
+	input_dev->name = "Spear Keyboard";
+	input_dev->phys = "keyboard/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->open = spear_kbd_open;
+	input_dev->close = spear_kbd_close;
+
+	error = matrix_keypad_build_keymap(keymap, NULL, NUM_ROWS, NUM_COLS,
+					   kbd->keycodes, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		return error;
+	}
+
+	if (kbd->rep)
+		__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	input_set_drvdata(input_dev, kbd);
+
+	error = devm_request_irq(&pdev->dev, irq, spear_kbd_interrupt, 0,
+			"keyboard", kbd);
+	if (error) {
+		dev_err(&pdev->dev, "request_irq failed\n");
+		return error;
+	}
+
+	error = clk_prepare(kbd->clk);
+	if (error)
+		return error;
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "Unable to register keyboard device\n");
+		clk_unprepare(kbd->clk);
+		return error;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+	platform_set_drvdata(pdev, kbd);
+
+	return 0;
+}
+
+static int spear_kbd_remove(struct platform_device *pdev)
+{
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+
+	input_unregister_device(kbd->input);
+	clk_unprepare(kbd->clk);
+
+	return 0;
+}
+
+static int __maybe_unused spear_kbd_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input;
+	unsigned int rate = 0, mode_ctl_reg, val;
+
+	mutex_lock(&input_dev->mutex);
+
+	/* explicitly enable clock as we may program device */
+	clk_enable(kbd->clk);
+
+	mode_ctl_reg = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+
+	if (device_may_wakeup(&pdev->dev)) {
+		if (!enable_irq_wake(kbd->irq))
+			kbd->irq_wake_enabled = true;
+
+		/*
+		 * reprogram the keyboard operating frequency as on some
+		 * platform it may change during system suspended
+		 */
+		if (kbd->suspended_rate)
+			rate = kbd->suspended_rate / 1000000 - 1;
+		else
+			rate = clk_get_rate(kbd->clk) / 1000000 - 1;
+
+		val = mode_ctl_reg &
+			~(MODE_CTL_PCLK_FREQ_MSK << MODE_CTL_PCLK_FREQ_SHIFT);
+		val |= (rate & MODE_CTL_PCLK_FREQ_MSK)
+			<< MODE_CTL_PCLK_FREQ_SHIFT;
+		writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+
+	} else {
+		if (input_dev->users) {
+			writel_relaxed(mode_ctl_reg & ~MODE_CTL_START_SCAN,
+					kbd->io_base + MODE_CTL_REG);
+			clk_disable(kbd->clk);
+		}
+	}
+
+	/* store current configuration */
+	if (input_dev->users)
+		kbd->mode_ctl_reg = mode_ctl_reg;
+
+	/* restore previous clk state */
+	clk_disable(kbd->clk);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused spear_kbd_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (device_may_wakeup(&pdev->dev)) {
+		if (kbd->irq_wake_enabled) {
+			kbd->irq_wake_enabled = false;
+			disable_irq_wake(kbd->irq);
+		}
+	} else {
+		if (input_dev->users)
+			clk_enable(kbd->clk);
+	}
+
+	/* restore current configuration */
+	if (input_dev->users)
+		writel_relaxed(kbd->mode_ctl_reg, kbd->io_base + MODE_CTL_REG);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(spear_kbd_pm_ops, spear_kbd_suspend, spear_kbd_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id spear_kbd_id_table[] = {
+	{ .compatible = "st,spear300-kbd" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spear_kbd_id_table);
+#endif
+
+static struct platform_driver spear_kbd_driver = {
+	.probe		= spear_kbd_probe,
+	.remove		= spear_kbd_remove,
+	.driver		= {
+		.name	= "keyboard",
+		.pm	= &spear_kbd_pm_ops,
+		.of_match_table = of_match_ptr(spear_kbd_id_table),
+	},
+};
+module_platform_driver(spear_kbd_driver);
+
+MODULE_AUTHOR("Rajeev Kumar");
+MODULE_DESCRIPTION("SPEAr Keyboard Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c
new file mode 100644
index 000000000..27562cd67
--- /dev/null
+++ b/drivers/input/keyboard/st-keyscan.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics Key Scanning driver
+ *
+ * Copyright (c) 2014 STMicroelectonics Ltd.
+ * Author: Stuart Menefy <stuart.menefy@st.com>
+ *
+ * Based on sh_keysc.c, copyright 2008 Magnus Damm
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/input/matrix_keypad.h>
+
+#define ST_KEYSCAN_MAXKEYS 16
+
+#define KEYSCAN_CONFIG_OFF		0x0
+#define KEYSCAN_CONFIG_ENABLE		0x1
+#define KEYSCAN_DEBOUNCE_TIME_OFF	0x4
+#define KEYSCAN_MATRIX_STATE_OFF	0x8
+#define KEYSCAN_MATRIX_DIM_OFF		0xc
+#define KEYSCAN_MATRIX_DIM_X_SHIFT	0x0
+#define KEYSCAN_MATRIX_DIM_Y_SHIFT	0x2
+
+struct st_keyscan {
+	void __iomem *base;
+	int irq;
+	struct clk *clk;
+	struct input_dev *input_dev;
+	unsigned long last_state;
+	unsigned int n_rows;
+	unsigned int n_cols;
+	unsigned int debounce_us;
+};
+
+static irqreturn_t keyscan_isr(int irq, void *dev_id)
+{
+	struct st_keyscan *keypad = dev_id;
+	unsigned short *keycode = keypad->input_dev->keycode;
+	unsigned long state, change;
+	int bit_nr;
+
+	state = readl(keypad->base + KEYSCAN_MATRIX_STATE_OFF) & 0xffff;
+	change = keypad->last_state ^ state;
+	keypad->last_state = state;
+
+	for_each_set_bit(bit_nr, &change, BITS_PER_LONG)
+		input_report_key(keypad->input_dev,
+				 keycode[bit_nr], state & BIT(bit_nr));
+
+	input_sync(keypad->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int keyscan_start(struct st_keyscan *keypad)
+{
+	int error;
+
+	error = clk_enable(keypad->clk);
+	if (error)
+		return error;
+
+	writel(keypad->debounce_us * (clk_get_rate(keypad->clk) / 1000000),
+	       keypad->base + KEYSCAN_DEBOUNCE_TIME_OFF);
+
+	writel(((keypad->n_cols - 1) << KEYSCAN_MATRIX_DIM_X_SHIFT) |
+	       ((keypad->n_rows - 1) << KEYSCAN_MATRIX_DIM_Y_SHIFT),
+	       keypad->base + KEYSCAN_MATRIX_DIM_OFF);
+
+	writel(KEYSCAN_CONFIG_ENABLE, keypad->base + KEYSCAN_CONFIG_OFF);
+
+	return 0;
+}
+
+static void keyscan_stop(struct st_keyscan *keypad)
+{
+	writel(0, keypad->base + KEYSCAN_CONFIG_OFF);
+
+	clk_disable(keypad->clk);
+}
+
+static int keyscan_open(struct input_dev *dev)
+{
+	struct st_keyscan *keypad = input_get_drvdata(dev);
+
+	return keyscan_start(keypad);
+}
+
+static void keyscan_close(struct input_dev *dev)
+{
+	struct st_keyscan *keypad = input_get_drvdata(dev);
+
+	keyscan_stop(keypad);
+}
+
+static int keypad_matrix_key_parse_dt(struct st_keyscan *keypad_data)
+{
+	struct device *dev = keypad_data->input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	int error;
+
+	error = matrix_keypad_parse_properties(dev, &keypad_data->n_rows,
+					       &keypad_data->n_cols);
+	if (error) {
+		dev_err(dev, "failed to parse keypad params\n");
+		return error;
+	}
+
+	of_property_read_u32(np, "st,debounce-us", &keypad_data->debounce_us);
+
+	dev_dbg(dev, "n_rows=%d n_col=%d debounce=%d\n",
+		keypad_data->n_rows, keypad_data->n_cols,
+		keypad_data->debounce_us);
+
+	return 0;
+}
+
+static int keyscan_probe(struct platform_device *pdev)
+{
+	struct st_keyscan *keypad_data;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int error;
+
+	if (!pdev->dev.of_node) {
+		dev_err(&pdev->dev, "no DT data present\n");
+		return -EINVAL;
+	}
+
+	keypad_data = devm_kzalloc(&pdev->dev, sizeof(*keypad_data),
+				   GFP_KERNEL);
+	if (!keypad_data)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = pdev->name;
+	input_dev->phys = "keyscan-keys/input0";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = keyscan_open;
+	input_dev->close = keyscan_close;
+
+	input_dev->id.bustype = BUS_HOST;
+
+	keypad_data->input_dev = input_dev;
+
+	error = keypad_matrix_key_parse_dt(keypad_data);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   keypad_data->n_rows,
+					   keypad_data->n_cols,
+					   NULL, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		return error;
+	}
+
+	input_set_drvdata(input_dev, keypad_data);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	keypad_data->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad_data->base))
+		return PTR_ERR(keypad_data->base);
+
+	keypad_data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad_data->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return PTR_ERR(keypad_data->clk);
+	}
+
+	error = clk_enable(keypad_data->clk);
+	if (error) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return error;
+	}
+
+	keyscan_stop(keypad_data);
+
+	keypad_data->irq = platform_get_irq(pdev, 0);
+	if (keypad_data->irq < 0)
+		return -EINVAL;
+
+	error = devm_request_irq(&pdev->dev, keypad_data->irq, keyscan_isr, 0,
+				 pdev->name, keypad_data);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, keypad_data);
+
+	device_set_wakeup_capable(&pdev->dev, 1);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int keyscan_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct st_keyscan *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input = keypad->input_dev;
+
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(keypad->irq);
+	else if (input->users)
+		keyscan_stop(keypad);
+
+	mutex_unlock(&input->mutex);
+	return 0;
+}
+
+static int keyscan_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct st_keyscan *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input = keypad->input_dev;
+	int retval = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(keypad->irq);
+	else if (input->users)
+		retval = keyscan_start(keypad);
+
+	mutex_unlock(&input->mutex);
+	return retval;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(keyscan_dev_pm_ops, keyscan_suspend, keyscan_resume);
+
+static const struct of_device_id keyscan_of_match[] = {
+	{ .compatible = "st,sti-keyscan" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, keyscan_of_match);
+
+static struct platform_driver keyscan_device_driver = {
+	.probe		= keyscan_probe,
+	.driver		= {
+		.name	= "st-keyscan",
+		.pm	= &keyscan_dev_pm_ops,
+		.of_match_table = of_match_ptr(keyscan_of_match),
+	}
+};
+
+module_platform_driver(keyscan_device_driver);
+
+MODULE_AUTHOR("Stuart Menefy <stuart.menefy@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics keyscan device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
new file mode 100644
index 000000000..7bf97285e
--- /dev/null
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/stmpe.h>
+
+/* These are at the same addresses in all STMPE variants */
+#define STMPE_KPC_COL			0x60
+#define STMPE_KPC_ROW_MSB		0x61
+#define STMPE_KPC_ROW_LSB		0x62
+#define STMPE_KPC_CTRL_MSB		0x63
+#define STMPE_KPC_CTRL_LSB		0x64
+#define STMPE_KPC_COMBI_KEY_0		0x65
+#define STMPE_KPC_COMBI_KEY_1		0x66
+#define STMPE_KPC_COMBI_KEY_2		0x67
+#define STMPE_KPC_DATA_BYTE0		0x68
+#define STMPE_KPC_DATA_BYTE1		0x69
+#define STMPE_KPC_DATA_BYTE2		0x6a
+#define STMPE_KPC_DATA_BYTE3		0x6b
+#define STMPE_KPC_DATA_BYTE4		0x6c
+
+#define STMPE_KPC_CTRL_LSB_SCAN		(0x1 << 0)
+#define STMPE_KPC_CTRL_LSB_DEBOUNCE	(0x7f << 1)
+#define STMPE_KPC_CTRL_MSB_SCAN_COUNT	(0xf << 4)
+
+#define STMPE_KPC_ROW_MSB_ROWS		0xff
+
+#define STMPE_KPC_DATA_UP		(0x1 << 7)
+#define STMPE_KPC_DATA_ROW		(0xf << 3)
+#define STMPE_KPC_DATA_COL		(0x7 << 0)
+#define STMPE_KPC_DATA_NOKEY_MASK	0x78
+
+#define STMPE_KEYPAD_MAX_DEBOUNCE	127
+#define STMPE_KEYPAD_MAX_SCAN_COUNT	15
+
+#define STMPE_KEYPAD_MAX_ROWS		8
+#define STMPE_KEYPAD_MAX_COLS		8
+#define STMPE_KEYPAD_ROW_SHIFT		3
+#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
+	(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
+
+
+#define STMPE1601_NUM_DATA	5
+#define STMPE2401_NUM_DATA	3
+#define STMPE2403_NUM_DATA	5
+
+/* Make sure it covers all cases above */
+#define MAX_NUM_DATA		5
+
+/**
+ * struct stmpe_keypad_variant - model-specific attributes
+ * @auto_increment: whether the KPC_DATA_BYTE register address
+ *		    auto-increments on multiple read
+ * @set_pullup: whether the pins need to have their pull-ups set
+ * @num_data: number of data bytes
+ * @num_normal_data: number of normal keys' data bytes
+ * @max_cols: maximum number of columns supported
+ * @max_rows: maximum number of rows supported
+ * @col_gpios: bitmask of gpios which can be used for columns
+ * @row_gpios: bitmask of gpios which can be used for rows
+ */
+struct stmpe_keypad_variant {
+	bool		auto_increment;
+	bool		set_pullup;
+	int		num_data;
+	int		num_normal_data;
+	int		max_cols;
+	int		max_rows;
+	unsigned int	col_gpios;
+	unsigned int	row_gpios;
+};
+
+static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
+	[STMPE1601] = {
+		.auto_increment		= true,
+		.num_data		= STMPE1601_NUM_DATA,
+		.num_normal_data	= 3,
+		.max_cols		= 8,
+		.max_rows		= 8,
+		.col_gpios		= 0x000ff,	/* GPIO 0 - 7 */
+		.row_gpios		= 0x0ff00,	/* GPIO 8 - 15 */
+	},
+	[STMPE2401] = {
+		.auto_increment		= false,
+		.set_pullup		= true,
+		.num_data		= STMPE2401_NUM_DATA,
+		.num_normal_data	= 2,
+		.max_cols		= 8,
+		.max_rows		= 12,
+		.col_gpios		= 0x0000ff,	/* GPIO 0 - 7*/
+		.row_gpios		= 0x1f7f00,	/* GPIO 8-14, 16-20 */
+	},
+	[STMPE2403] = {
+		.auto_increment		= true,
+		.set_pullup		= true,
+		.num_data		= STMPE2403_NUM_DATA,
+		.num_normal_data	= 3,
+		.max_cols		= 8,
+		.max_rows		= 12,
+		.col_gpios		= 0x0000ff,	/* GPIO 0 - 7*/
+		.row_gpios		= 0x1fef00,	/* GPIO 8-14, 16-20 */
+	},
+};
+
+/**
+ * struct stmpe_keypad - STMPE keypad state container
+ * @stmpe: pointer to parent STMPE device
+ * @input: spawned input device
+ * @variant: STMPE variant
+ * @debounce_ms: debounce interval, in ms.  Maximum is
+ *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ * @rows: bitmask for the rows
+ * @cols: bitmask for the columns
+ * @keymap: the keymap
+ */
+struct stmpe_keypad {
+	struct stmpe *stmpe;
+	struct input_dev *input;
+	const struct stmpe_keypad_variant *variant;
+	unsigned int debounce_ms;
+	unsigned int scan_count;
+	bool no_autorepeat;
+	unsigned int rows;
+	unsigned int cols;
+	unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
+};
+
+static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
+{
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	struct stmpe *stmpe = keypad->stmpe;
+	int ret;
+	int i;
+
+	if (variant->auto_increment)
+		return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0,
+					variant->num_data, data);
+
+	for (i = 0; i < variant->num_data; i++) {
+		ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i);
+		if (ret < 0)
+			return ret;
+
+		data[i] = ret;
+	}
+
+	return 0;
+}
+
+static irqreturn_t stmpe_keypad_irq(int irq, void *dev)
+{
+	struct stmpe_keypad *keypad = dev;
+	struct input_dev *input = keypad->input;
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	u8 fifo[MAX_NUM_DATA];
+	int ret;
+	int i;
+
+	ret = stmpe_keypad_read_data(keypad, fifo);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < variant->num_normal_data; i++) {
+		u8 data = fifo[i];
+		int row = (data & STMPE_KPC_DATA_ROW) >> 3;
+		int col = data & STMPE_KPC_DATA_COL;
+		int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT);
+		bool up = data & STMPE_KPC_DATA_UP;
+
+		if ((data & STMPE_KPC_DATA_NOKEY_MASK)
+			== STMPE_KPC_DATA_NOKEY_MASK)
+			continue;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keypad->keymap[code], !up);
+		input_sync(input);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
+{
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	unsigned int col_gpios = variant->col_gpios;
+	unsigned int row_gpios = variant->row_gpios;
+	struct stmpe *stmpe = keypad->stmpe;
+	u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
+	unsigned int pins = 0;
+	unsigned int pu_pins = 0;
+	int ret;
+	int i;
+
+	/*
+	 * Figure out which pins need to be set to the keypad alternate
+	 * function.
+	 *
+	 * {cols,rows}_gpios are bitmasks of which pins on the chip can be used
+	 * for the keypad.
+	 *
+	 * keypad->{cols,rows} are a bitmask of which pins (of the ones useable
+	 * for the keypad) are used on the board.
+	 */
+
+	for (i = 0; i < variant->max_cols; i++) {
+		int num = __ffs(col_gpios);
+
+		if (keypad->cols & (1 << i)) {
+			pins |= 1 << num;
+			pu_pins |= 1 << num;
+		}
+
+		col_gpios &= ~(1 << num);
+	}
+
+	for (i = 0; i < variant->max_rows; i++) {
+		int num = __ffs(row_gpios);
+
+		if (keypad->rows & (1 << i))
+			pins |= 1 << num;
+
+		row_gpios &= ~(1 << num);
+	}
+
+	ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+	if (ret)
+		return ret;
+
+	/*
+	 * On STMPE24xx, set pin bias to pull-up on all keypad input
+	 * pins (columns), this incidentally happen to be maximum 8 pins
+	 * and placed at GPIO0-7 so only the LSB of the pull up register
+	 * ever needs to be written.
+	 */
+	if (variant->set_pullup) {
+		u8 val;
+
+		ret = stmpe_reg_read(stmpe, pureg);
+		if (ret)
+			return ret;
+
+		/* Do not touch unused pins, may be used for GPIO */
+		val = ret & ~pu_pins;
+		val |= pu_pins;
+
+		ret = stmpe_reg_write(stmpe, pureg, val);
+	}
+
+	return 0;
+}
+
+static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
+{
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	struct stmpe *stmpe = keypad->stmpe;
+	int ret;
+
+	if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+		return -EINVAL;
+
+	if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+		return -EINVAL;
+
+	ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_keypad_altfunc_init(keypad);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows);
+	if (ret < 0)
+		return ret;
+
+	if (variant->max_rows > 8) {
+		ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB,
+				     STMPE_KPC_ROW_MSB_ROWS,
+				     keypad->rows >> 8);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
+			     STMPE_KPC_CTRL_MSB_SCAN_COUNT,
+			     keypad->scan_count << 4);
+	if (ret < 0)
+		return ret;
+
+	return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB,
+			      STMPE_KPC_CTRL_LSB_SCAN |
+			      STMPE_KPC_CTRL_LSB_DEBOUNCE,
+			      STMPE_KPC_CTRL_LSB_SCAN |
+			      (keypad->debounce_ms << 1));
+}
+
+static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
+					u32 used_rows, u32 used_cols)
+{
+	int row, col;
+
+	for (row = 0; row < used_rows; row++) {
+		for (col = 0; col < used_cols; col++) {
+			int code = MATRIX_SCAN_CODE(row, col,
+						    STMPE_KEYPAD_ROW_SHIFT);
+			if (keypad->keymap[code] != KEY_RESERVED) {
+				keypad->rows |= 1 << row;
+				keypad->cols |= 1 << col;
+			}
+		}
+	}
+}
+
+static int stmpe_keypad_probe(struct platform_device *pdev)
+{
+	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+	struct device_node *np = pdev->dev.of_node;
+	struct stmpe_keypad *keypad;
+	struct input_dev *input;
+	u32 rows;
+	u32 cols;
+	int error;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	keypad = devm_kzalloc(&pdev->dev, sizeof(struct stmpe_keypad),
+			      GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	keypad->stmpe = stmpe;
+	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+	of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
+	of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
+	keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = "STMPE keypad";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &pdev->dev;
+
+	error = matrix_keypad_parse_properties(&pdev->dev, &rows, &cols);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
+					   keypad->keymap, input);
+	if (error)
+		return error;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	if (!keypad->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	stmpe_keypad_fill_used_pins(keypad, rows, cols);
+
+	keypad->input = input;
+
+	error = stmpe_keypad_chip_init(keypad);
+	if (error < 0)
+		return error;
+
+	error = devm_request_threaded_irq(&pdev->dev, irq,
+					  NULL, stmpe_keypad_irq,
+					  IRQF_ONESHOT, "stmpe-keypad", keypad);
+	if (error) {
+		dev_err(&pdev->dev, "unable to get irq: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev,
+			"unable to register input device: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+}
+
+static int stmpe_keypad_remove(struct platform_device *pdev)
+{
+	struct stmpe_keypad *keypad = platform_get_drvdata(pdev);
+
+	stmpe_disable(keypad->stmpe, STMPE_BLOCK_KEYPAD);
+
+	return 0;
+}
+
+static struct platform_driver stmpe_keypad_driver = {
+	.driver.name	= "stmpe-keypad",
+	.driver.owner	= THIS_MODULE,
+	.probe		= stmpe_keypad_probe,
+	.remove		= stmpe_keypad_remove,
+};
+module_platform_driver(stmpe_keypad_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPExxxx keypad driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");
diff --git a/drivers/input/keyboard/stowaway.c b/drivers/input/keyboard/stowaway.c
new file mode 100644
index 000000000..a4977193d
--- /dev/null
+++ b/drivers/input/keyboard/stowaway.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Stowaway keyboard driver for Linux
+ */
+
+/*
+ *  Copyright (c) 2006 Marek Vasut
+ *
+ *  Based on Newton keyboard driver for Linux
+ *  by Justin Cormack
+ */
+
+/*
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Stowaway keyboard driver"
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define SKBD_KEY_MASK	0x7f
+#define SKBD_RELEASE	0x80
+
+static unsigned char skbd_keycode[128] = {
+	KEY_1, KEY_2, KEY_3, KEY_Z, KEY_4, KEY_5, KEY_6, KEY_7,
+	0, KEY_Q, KEY_W, KEY_E, KEY_R, KEY_T, KEY_Y, KEY_GRAVE,
+	KEY_X, KEY_A, KEY_S, KEY_D, KEY_F, KEY_G, KEY_H, KEY_SPACE,
+	KEY_CAPSLOCK, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0,
+	0, 0, 0, KEY_LEFTALT, 0, 0, 0, 0,
+	0, 0, 0, 0, KEY_C, KEY_V, KEY_B, KEY_N,
+	KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, KEY_HOME, KEY_8, KEY_9, KEY_0, KEY_ESC,
+	KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_END, KEY_U, KEY_I, KEY_O, KEY_P,
+	KEY_APOSTROPHE, KEY_ENTER, KEY_PAGEUP,0, KEY_J, KEY_K, KEY_L, KEY_SEMICOLON,
+	KEY_SLASH, KEY_UP, KEY_PAGEDOWN, 0,KEY_M, KEY_COMMA, KEY_DOT, KEY_INSERT,
+	KEY_DELETE, KEY_LEFT, KEY_DOWN, KEY_RIGHT,  0, 0, 0,
+	KEY_LEFTSHIFT, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7,
+	KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, 0, 0, 0
+};
+
+struct skbd {
+	unsigned char keycode[128];
+	struct input_dev *dev;
+	struct serio *serio;
+	char phys[32];
+};
+
+static irqreturn_t skbd_interrupt(struct serio *serio, unsigned char data,
+				  unsigned int flags)
+{
+	struct skbd *skbd = serio_get_drvdata(serio);
+	struct input_dev *dev = skbd->dev;
+
+	if (skbd->keycode[data & SKBD_KEY_MASK]) {
+		input_report_key(dev, skbd->keycode[data & SKBD_KEY_MASK],
+				 !(data & SKBD_RELEASE));
+		input_sync(dev);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int skbd_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct skbd *skbd;
+	struct input_dev *input_dev;
+	int err = -ENOMEM;
+	int i;
+
+	skbd = kzalloc(sizeof(struct skbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!skbd || !input_dev)
+		goto fail1;
+
+	skbd->serio = serio;
+	skbd->dev = input_dev;
+	snprintf(skbd->phys, sizeof(skbd->phys), "%s/input0", serio->phys);
+	memcpy(skbd->keycode, skbd_keycode, sizeof(skbd->keycode));
+
+	input_dev->name = "Stowaway Keyboard";
+	input_dev->phys = skbd->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_STOWAWAY;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->keycode = skbd->keycode;
+	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodemax = ARRAY_SIZE(skbd_keycode);
+	for (i = 0; i < ARRAY_SIZE(skbd_keycode); i++)
+		set_bit(skbd_keycode[i], input_dev->keybit);
+	clear_bit(0, input_dev->keybit);
+
+	serio_set_drvdata(serio, skbd);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(skbd->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3: serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(skbd);
+	return err;
+}
+
+static void skbd_disconnect(struct serio *serio)
+{
+	struct skbd *skbd = serio_get_drvdata(serio);
+
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_unregister_device(skbd->dev);
+	kfree(skbd);
+}
+
+static const struct serio_device_id skbd_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_STOWAWAY,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, skbd_serio_ids);
+
+static struct serio_driver skbd_drv = {
+	.driver		= {
+		.name	= "stowaway",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= skbd_serio_ids,
+	.interrupt	= skbd_interrupt,
+	.connect	= skbd_connect,
+	.disconnect	= skbd_disconnect,
+};
+
+module_serio_driver(skbd_drv);
diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c
new file mode 100644
index 000000000..4a796bed4
--- /dev/null
+++ b/drivers/input/keyboard/sun4i-lradc-keys.c
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Allwinner sun4i low res adc attached tablet keys driver
+ *
+ * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com>
+ */
+
+/*
+ * Allwinnner sunxi SoCs have a lradc which is specifically designed to have
+ * various (tablet) keys (ie home, back, search, etc). attached to it using
+ * a resistor network. This driver is for the keys on such boards.
+ *
+ * There are 2 channels, currently this driver only supports channel 0 since
+ * there are no boards known to use channel 1.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define LRADC_CTRL		0x00
+#define LRADC_INTC		0x04
+#define LRADC_INTS		0x08
+#define LRADC_DATA0		0x0c
+#define LRADC_DATA1		0x10
+
+/* LRADC_CTRL bits */
+#define FIRST_CONVERT_DLY(x)	((x) << 24) /* 8 bits */
+#define CHAN_SELECT(x)		((x) << 22) /* 2 bits */
+#define CONTINUE_TIME_SEL(x)	((x) << 16) /* 4 bits */
+#define KEY_MODE_SEL(x)		((x) << 12) /* 2 bits */
+#define LEVELA_B_CNT(x)		((x) << 8)  /* 4 bits */
+#define HOLD_KEY_EN(x)		((x) << 7)
+#define HOLD_EN(x)		((x) << 6)
+#define LEVELB_VOL(x)		((x) << 4)  /* 2 bits */
+#define SAMPLE_RATE(x)		((x) << 2)  /* 2 bits */
+#define ENABLE(x)		((x) << 0)
+
+/* LRADC_INTC and LRADC_INTS bits */
+#define CHAN1_KEYUP_IRQ		BIT(12)
+#define CHAN1_ALRDY_HOLD_IRQ	BIT(11)
+#define CHAN1_HOLD_IRQ		BIT(10)
+#define	CHAN1_KEYDOWN_IRQ	BIT(9)
+#define CHAN1_DATA_IRQ		BIT(8)
+#define CHAN0_KEYUP_IRQ		BIT(4)
+#define CHAN0_ALRDY_HOLD_IRQ	BIT(3)
+#define CHAN0_HOLD_IRQ		BIT(2)
+#define	CHAN0_KEYDOWN_IRQ	BIT(1)
+#define CHAN0_DATA_IRQ		BIT(0)
+
+/* struct lradc_variant - Describe sun4i-a10-lradc-keys hardware variant
+ * @divisor_numerator:		The numerator of lradc Vref internally divisor
+ * @divisor_denominator:	The denominator of lradc Vref internally divisor
+ */
+struct lradc_variant {
+	u8 divisor_numerator;
+	u8 divisor_denominator;
+};
+
+static const struct lradc_variant lradc_variant_a10 = {
+	.divisor_numerator = 2,
+	.divisor_denominator = 3
+};
+
+static const struct lradc_variant r_lradc_variant_a83t = {
+	.divisor_numerator = 3,
+	.divisor_denominator = 4
+};
+
+struct sun4i_lradc_keymap {
+	u32 voltage;
+	u32 keycode;
+};
+
+struct sun4i_lradc_data {
+	struct device *dev;
+	struct input_dev *input;
+	void __iomem *base;
+	struct regulator *vref_supply;
+	struct sun4i_lradc_keymap *chan0_map;
+	const struct lradc_variant *variant;
+	u32 chan0_map_count;
+	u32 chan0_keycode;
+	u32 vref;
+};
+
+static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id)
+{
+	struct sun4i_lradc_data *lradc = dev_id;
+	u32 i, ints, val, voltage, diff, keycode = 0, closest = 0xffffffff;
+
+	ints  = readl(lradc->base + LRADC_INTS);
+
+	/*
+	 * lradc supports only one keypress at a time, release does not give
+	 * any info as to which key was released, so we cache the keycode.
+	 */
+
+	if (ints & CHAN0_KEYUP_IRQ) {
+		input_report_key(lradc->input, lradc->chan0_keycode, 0);
+		lradc->chan0_keycode = 0;
+	}
+
+	if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) {
+		val = readl(lradc->base + LRADC_DATA0) & 0x3f;
+		voltage = val * lradc->vref / 63;
+
+		for (i = 0; i < lradc->chan0_map_count; i++) {
+			diff = abs(lradc->chan0_map[i].voltage - voltage);
+			if (diff < closest) {
+				closest = diff;
+				keycode = lradc->chan0_map[i].keycode;
+			}
+		}
+
+		lradc->chan0_keycode = keycode;
+		input_report_key(lradc->input, lradc->chan0_keycode, 1);
+	}
+
+	input_sync(lradc->input);
+
+	writel(ints, lradc->base + LRADC_INTS);
+
+	return IRQ_HANDLED;
+}
+
+static int sun4i_lradc_open(struct input_dev *dev)
+{
+	struct sun4i_lradc_data *lradc = input_get_drvdata(dev);
+	int error;
+
+	error = regulator_enable(lradc->vref_supply);
+	if (error)
+		return error;
+
+	lradc->vref = regulator_get_voltage(lradc->vref_supply) *
+		      lradc->variant->divisor_numerator /
+		      lradc->variant->divisor_denominator;
+	/*
+	 * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to
+	 * stabilize on press, wait (1 + 1) * 4 ms for key release
+	 */
+	writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) |
+		SAMPLE_RATE(0) | ENABLE(1), lradc->base + LRADC_CTRL);
+
+	writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC);
+
+	return 0;
+}
+
+static void sun4i_lradc_close(struct input_dev *dev)
+{
+	struct sun4i_lradc_data *lradc = input_get_drvdata(dev);
+
+	/* Disable lradc, leave other settings unchanged */
+	writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) |
+		SAMPLE_RATE(2), lradc->base + LRADC_CTRL);
+	writel(0, lradc->base + LRADC_INTC);
+
+	regulator_disable(lradc->vref_supply);
+}
+
+static int sun4i_lradc_load_dt_keymap(struct device *dev,
+				      struct sun4i_lradc_data *lradc)
+{
+	struct device_node *np, *pp;
+	int i;
+	int error;
+
+	np = dev->of_node;
+	if (!np)
+		return -EINVAL;
+
+	lradc->chan0_map_count = of_get_child_count(np);
+	if (lradc->chan0_map_count == 0) {
+		dev_err(dev, "keymap is missing in device tree\n");
+		return -EINVAL;
+	}
+
+	lradc->chan0_map = devm_kmalloc_array(dev, lradc->chan0_map_count,
+					      sizeof(struct sun4i_lradc_keymap),
+					      GFP_KERNEL);
+	if (!lradc->chan0_map)
+		return -ENOMEM;
+
+	i = 0;
+	for_each_child_of_node(np, pp) {
+		struct sun4i_lradc_keymap *map = &lradc->chan0_map[i];
+		u32 channel;
+
+		error = of_property_read_u32(pp, "channel", &channel);
+		if (error || channel != 0) {
+			dev_err(dev, "%pOFn: Inval channel prop\n", pp);
+			of_node_put(pp);
+			return -EINVAL;
+		}
+
+		error = of_property_read_u32(pp, "voltage", &map->voltage);
+		if (error) {
+			dev_err(dev, "%pOFn: Inval voltage prop\n", pp);
+			of_node_put(pp);
+			return -EINVAL;
+		}
+
+		error = of_property_read_u32(pp, "linux,code", &map->keycode);
+		if (error) {
+			dev_err(dev, "%pOFn: Inval linux,code prop\n", pp);
+			of_node_put(pp);
+			return -EINVAL;
+		}
+
+		i++;
+	}
+
+	return 0;
+}
+
+static int sun4i_lradc_probe(struct platform_device *pdev)
+{
+	struct sun4i_lradc_data *lradc;
+	struct device *dev = &pdev->dev;
+	int i;
+	int error;
+
+	lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL);
+	if (!lradc)
+		return -ENOMEM;
+
+	error = sun4i_lradc_load_dt_keymap(dev, lradc);
+	if (error)
+		return error;
+
+	lradc->variant = of_device_get_match_data(&pdev->dev);
+	if (!lradc->variant) {
+		dev_err(&pdev->dev, "Missing sun4i-a10-lradc-keys variant\n");
+		return -EINVAL;
+	}
+
+	lradc->vref_supply = devm_regulator_get(dev, "vref");
+	if (IS_ERR(lradc->vref_supply))
+		return PTR_ERR(lradc->vref_supply);
+
+	lradc->dev = dev;
+	lradc->input = devm_input_allocate_device(dev);
+	if (!lradc->input)
+		return -ENOMEM;
+
+	lradc->input->name = pdev->name;
+	lradc->input->phys = "sun4i_lradc/input0";
+	lradc->input->open = sun4i_lradc_open;
+	lradc->input->close = sun4i_lradc_close;
+	lradc->input->id.bustype = BUS_HOST;
+	lradc->input->id.vendor = 0x0001;
+	lradc->input->id.product = 0x0001;
+	lradc->input->id.version = 0x0100;
+
+	__set_bit(EV_KEY, lradc->input->evbit);
+	for (i = 0; i < lradc->chan0_map_count; i++)
+		__set_bit(lradc->chan0_map[i].keycode, lradc->input->keybit);
+
+	input_set_drvdata(lradc->input, lradc);
+
+	lradc->base = devm_ioremap_resource(dev,
+			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(lradc->base))
+		return PTR_ERR(lradc->base);
+
+	error = devm_request_irq(dev, platform_get_irq(pdev, 0),
+				 sun4i_lradc_irq, 0,
+				 "sun4i-a10-lradc-keys", lradc);
+	if (error)
+		return error;
+
+	error = input_register_device(lradc->input);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct of_device_id sun4i_lradc_of_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-lradc-keys",
+		.data = &lradc_variant_a10 },
+	{ .compatible = "allwinner,sun8i-a83t-r-lradc",
+		.data = &r_lradc_variant_a83t },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match);
+
+static struct platform_driver sun4i_lradc_driver = {
+	.driver = {
+		.name	= "sun4i-a10-lradc-keys",
+		.of_match_table = of_match_ptr(sun4i_lradc_of_match),
+	},
+	.probe	= sun4i_lradc_probe,
+};
+
+module_platform_driver(sun4i_lradc_driver);
+
+MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
new file mode 100644
index 000000000..d450f11b9
--- /dev/null
+++ b/drivers/input/keyboard/sunkbd.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ * Sun keyboard driver for Linux
+ */
+
+/*
+ */
+
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/workqueue.h>
+
+#define DRIVER_DESC	"Sun keyboard driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static unsigned char sunkbd_keycode[128] = {
+	  0,128,114,129,115, 59, 60, 68, 61, 87, 62, 88, 63,100, 64,112,
+	 65, 66, 67, 56,103,119, 99, 70,105,130,131,108,106,  1,  2,  3,
+	  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 41, 14,110,113, 98, 55,
+	116,132, 83,133,102, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25,
+	 26, 27,111,127, 71, 72, 73, 74,134,135,107,  0, 29, 30, 31, 32,
+	 33, 34, 35, 36, 37, 38, 39, 40, 43, 28, 96, 75, 76, 77, 82,136,
+	104,137, 69, 42, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54,101,
+	 79, 80, 81,  0,  0,  0,138, 58,125, 57,126,109, 86, 78
+};
+
+#define SUNKBD_CMD_RESET	0x1
+#define SUNKBD_CMD_BELLON	0x2
+#define SUNKBD_CMD_BELLOFF	0x3
+#define SUNKBD_CMD_CLICK	0xa
+#define SUNKBD_CMD_NOCLICK	0xb
+#define SUNKBD_CMD_SETLED	0xe
+#define SUNKBD_CMD_LAYOUT	0xf
+
+#define SUNKBD_RET_RESET	0xff
+#define SUNKBD_RET_ALLUP	0x7f
+#define SUNKBD_RET_LAYOUT	0xfe
+
+#define SUNKBD_LAYOUT_5_MASK	0x20
+#define SUNKBD_RELEASE		0x80
+#define SUNKBD_KEY		0x7f
+
+/*
+ * Per-keyboard data.
+ */
+
+struct sunkbd {
+	unsigned char keycode[ARRAY_SIZE(sunkbd_keycode)];
+	struct input_dev *dev;
+	struct serio *serio;
+	struct work_struct tq;
+	wait_queue_head_t wait;
+	char name[64];
+	char phys[32];
+	char type;
+	bool enabled;
+	volatile s8 reset;
+	volatile s8 layout;
+};
+
+/*
+ * sunkbd_interrupt() is called by the low level driver when a character
+ * is received.
+ */
+
+static irqreturn_t sunkbd_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct sunkbd *sunkbd = serio_get_drvdata(serio);
+
+	if (sunkbd->reset <= -1) {
+		/*
+		 * If cp[i] is 0xff, sunkbd->reset will stay -1.
+		 * The keyboard sends 0xff 0xff 0xID on powerup.
+		 */
+		sunkbd->reset = data;
+		wake_up_interruptible(&sunkbd->wait);
+		goto out;
+	}
+
+	if (sunkbd->layout == -1) {
+		sunkbd->layout = data;
+		wake_up_interruptible(&sunkbd->wait);
+		goto out;
+	}
+
+	switch (data) {
+
+	case SUNKBD_RET_RESET:
+		if (sunkbd->enabled)
+			schedule_work(&sunkbd->tq);
+		sunkbd->reset = -1;
+		break;
+
+	case SUNKBD_RET_LAYOUT:
+		sunkbd->layout = -1;
+		break;
+
+	case SUNKBD_RET_ALLUP: /* All keys released */
+		break;
+
+	default:
+		if (!sunkbd->enabled)
+			break;
+
+		if (sunkbd->keycode[data & SUNKBD_KEY]) {
+			input_report_key(sunkbd->dev,
+					 sunkbd->keycode[data & SUNKBD_KEY],
+					 !(data & SUNKBD_RELEASE));
+			input_sync(sunkbd->dev);
+		} else {
+			printk(KERN_WARNING
+				"sunkbd.c: Unknown key (scancode %#x) %s.\n",
+				data & SUNKBD_KEY,
+				data & SUNKBD_RELEASE ? "released" : "pressed");
+		}
+	}
+out:
+	return IRQ_HANDLED;
+}
+
+/*
+ * sunkbd_event() handles events from the input module.
+ */
+
+static int sunkbd_event(struct input_dev *dev,
+			unsigned int type, unsigned int code, int value)
+{
+	struct sunkbd *sunkbd = input_get_drvdata(dev);
+
+	switch (type) {
+
+	case EV_LED:
+
+		serio_write(sunkbd->serio, SUNKBD_CMD_SETLED);
+		serio_write(sunkbd->serio,
+			(!!test_bit(LED_CAPSL,   dev->led) << 3) |
+			(!!test_bit(LED_SCROLLL, dev->led) << 2) |
+			(!!test_bit(LED_COMPOSE, dev->led) << 1) |
+			 !!test_bit(LED_NUML,    dev->led));
+		return 0;
+
+	case EV_SND:
+
+		switch (code) {
+
+		case SND_CLICK:
+			serio_write(sunkbd->serio, SUNKBD_CMD_NOCLICK - value);
+			return 0;
+
+		case SND_BELL:
+			serio_write(sunkbd->serio, SUNKBD_CMD_BELLOFF - value);
+			return 0;
+		}
+
+		break;
+	}
+
+	return -1;
+}
+
+/*
+ * sunkbd_initialize() checks for a Sun keyboard attached, and determines
+ * its type.
+ */
+
+static int sunkbd_initialize(struct sunkbd *sunkbd)
+{
+	sunkbd->reset = -2;
+	serio_write(sunkbd->serio, SUNKBD_CMD_RESET);
+	wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ);
+	if (sunkbd->reset < 0)
+		return -1;
+
+	sunkbd->type = sunkbd->reset;
+
+	if (sunkbd->type == 4) {	/* Type 4 keyboard */
+		sunkbd->layout = -2;
+		serio_write(sunkbd->serio, SUNKBD_CMD_LAYOUT);
+		wait_event_interruptible_timeout(sunkbd->wait,
+						 sunkbd->layout >= 0, HZ / 4);
+		if (sunkbd->layout < 0)
+			return -1;
+		if (sunkbd->layout & SUNKBD_LAYOUT_5_MASK)
+			sunkbd->type = 5;
+	}
+
+	return 0;
+}
+
+/*
+ * sunkbd_set_leds_beeps() sets leds and beeps to a state the computer remembers
+ * they were in.
+ */
+
+static void sunkbd_set_leds_beeps(struct sunkbd *sunkbd)
+{
+	serio_write(sunkbd->serio, SUNKBD_CMD_SETLED);
+	serio_write(sunkbd->serio,
+		(!!test_bit(LED_CAPSL,   sunkbd->dev->led) << 3) |
+		(!!test_bit(LED_SCROLLL, sunkbd->dev->led) << 2) |
+		(!!test_bit(LED_COMPOSE, sunkbd->dev->led) << 1) |
+		 !!test_bit(LED_NUML,    sunkbd->dev->led));
+	serio_write(sunkbd->serio,
+		SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev->snd));
+	serio_write(sunkbd->serio,
+		SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd));
+}
+
+
+/*
+ * sunkbd_reinit() wait for the keyboard reset to complete and restores state
+ * of leds and beeps.
+ */
+
+static void sunkbd_reinit(struct work_struct *work)
+{
+	struct sunkbd *sunkbd = container_of(work, struct sunkbd, tq);
+
+	/*
+	 * It is OK that we check sunkbd->enabled without pausing serio,
+	 * as we only want to catch true->false transition that will
+	 * happen once and we will be woken up for it.
+	 */
+	wait_event_interruptible_timeout(sunkbd->wait,
+					 sunkbd->reset >= 0 || !sunkbd->enabled,
+					 HZ);
+
+	if (sunkbd->reset >= 0 && sunkbd->enabled)
+		sunkbd_set_leds_beeps(sunkbd);
+}
+
+static void sunkbd_enable(struct sunkbd *sunkbd, bool enable)
+{
+	serio_pause_rx(sunkbd->serio);
+	sunkbd->enabled = enable;
+	serio_continue_rx(sunkbd->serio);
+
+	if (!enable) {
+		wake_up_interruptible(&sunkbd->wait);
+		cancel_work_sync(&sunkbd->tq);
+	}
+}
+
+/*
+ * sunkbd_connect() probes for a Sun keyboard and fills the necessary
+ * structures.
+ */
+
+static int sunkbd_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct sunkbd *sunkbd;
+	struct input_dev *input_dev;
+	int err = -ENOMEM;
+	int i;
+
+	sunkbd = kzalloc(sizeof(struct sunkbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!sunkbd || !input_dev)
+		goto fail1;
+
+	sunkbd->serio = serio;
+	sunkbd->dev = input_dev;
+	init_waitqueue_head(&sunkbd->wait);
+	INIT_WORK(&sunkbd->tq, sunkbd_reinit);
+	snprintf(sunkbd->phys, sizeof(sunkbd->phys), "%s/input0", serio->phys);
+
+	serio_set_drvdata(serio, sunkbd);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	if (sunkbd_initialize(sunkbd) < 0) {
+		err = -ENODEV;
+		goto fail3;
+	}
+
+	snprintf(sunkbd->name, sizeof(sunkbd->name),
+		 "Sun Type %d keyboard", sunkbd->type);
+	memcpy(sunkbd->keycode, sunkbd_keycode, sizeof(sunkbd->keycode));
+
+	input_dev->name = sunkbd->name;
+	input_dev->phys = sunkbd->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor  = SERIO_SUNKBD;
+	input_dev->id.product = sunkbd->type;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_set_drvdata(input_dev, sunkbd);
+
+	input_dev->event = sunkbd_event;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_LED) |
+		BIT_MASK(EV_SND) | BIT_MASK(EV_REP);
+	input_dev->ledbit[0] = BIT_MASK(LED_CAPSL) | BIT_MASK(LED_COMPOSE) |
+		BIT_MASK(LED_SCROLLL) | BIT_MASK(LED_NUML);
+	input_dev->sndbit[0] = BIT_MASK(SND_CLICK) | BIT_MASK(SND_BELL);
+
+	input_dev->keycode = sunkbd->keycode;
+	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodemax = ARRAY_SIZE(sunkbd_keycode);
+	for (i = 0; i < ARRAY_SIZE(sunkbd_keycode); i++)
+		__set_bit(sunkbd->keycode[i], input_dev->keybit);
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	sunkbd_enable(sunkbd, true);
+
+	err = input_register_device(sunkbd->dev);
+	if (err)
+		goto fail4;
+
+	return 0;
+
+ fail4:	sunkbd_enable(sunkbd, false);
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(sunkbd);
+	return err;
+}
+
+/*
+ * sunkbd_disconnect() unregisters and closes behind us.
+ */
+
+static void sunkbd_disconnect(struct serio *serio)
+{
+	struct sunkbd *sunkbd = serio_get_drvdata(serio);
+
+	sunkbd_enable(sunkbd, false);
+	input_unregister_device(sunkbd->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	kfree(sunkbd);
+}
+
+static const struct serio_device_id sunkbd_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_SUNKBD,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_UNKNOWN, /* sunkbd does probe */
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, sunkbd_serio_ids);
+
+static struct serio_driver sunkbd_drv = {
+	.driver		= {
+		.name	= "sunkbd",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= sunkbd_serio_ids,
+	.interrupt	= sunkbd_interrupt,
+	.connect	= sunkbd_connect,
+	.disconnect	= sunkbd_disconnect,
+};
+
+module_serio_driver(sunkbd_drv);
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
new file mode 100644
index 000000000..89b9575dc
--- /dev/null
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -0,0 +1,512 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Jayeeta Banerjee <jayeeta.banerjee@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * TC35893 MFD Keypad Controller driver
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mfd/tc3589x.h>
+#include <linux/device.h>
+
+/* Maximum supported keypad matrix row/columns size */
+#define TC3589x_MAX_KPROW               8
+#define TC3589x_MAX_KPCOL               12
+
+/* keypad related Constants */
+#define TC3589x_MAX_DEBOUNCE_SETTLE     0xFF
+#define DEDICATED_KEY_VAL		0xFF
+
+/* Pull up/down masks */
+#define TC3589x_NO_PULL_MASK		0x0
+#define TC3589x_PULL_DOWN_MASK		0x1
+#define TC3589x_PULL_UP_MASK		0x2
+#define TC3589x_PULLUP_ALL_MASK		0xAA
+#define TC3589x_IO_PULL_VAL(index, mask)	((mask)<<((index)%4)*2)
+
+/* Bit masks for IOCFG register */
+#define IOCFG_BALLCFG		0x01
+#define IOCFG_IG		0x08
+
+#define KP_EVCODE_COL_MASK	0x0F
+#define KP_EVCODE_ROW_MASK	0x70
+#define KP_RELEASE_EVT_MASK	0x80
+
+#define KP_ROW_SHIFT		4
+
+#define KP_NO_VALID_KEY_MASK	0x7F
+
+/* bit masks for RESTCTRL register */
+#define TC3589x_KBDRST		0x2
+#define TC3589x_IRQRST		0x10
+#define TC3589x_RESET_ALL	0x1B
+
+/* KBDMFS register bit mask */
+#define TC3589x_KBDMFS_EN	0x1
+
+/* CLKEN register bitmask */
+#define KPD_CLK_EN		0x1
+
+/* RSTINTCLR register bit mask */
+#define IRQ_CLEAR		0x1
+
+/* bit masks for keyboard interrupts*/
+#define TC3589x_EVT_LOSS_INT	0x8
+#define TC3589x_EVT_INT		0x4
+#define TC3589x_KBD_LOSS_INT	0x2
+#define TC3589x_KBD_INT		0x1
+
+/* bit masks for keyboard interrupt clear*/
+#define TC3589x_EVT_INT_CLR	0x2
+#define TC3589x_KBD_INT_CLR	0x1
+
+/**
+ * struct tc35893_keypad_platform_data - platform specific keypad data
+ * @keymap_data:        matrix scan code table for keycodes
+ * @krow:               mask for available rows, value is 0xFF
+ * @kcol:               mask for available columns, value is 0xFF
+ * @debounce_period:    platform specific debounce time
+ * @settle_time:        platform specific settle down time
+ * @irqtype:            type of interrupt, falling or rising edge
+ * @enable_wakeup:      specifies if keypad event can wake up system from sleep
+ * @no_autorepeat:      flag for auto repetition
+ */
+struct tc3589x_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+	u8                      krow;
+	u8                      kcol;
+	u8                      debounce_period;
+	u8                      settle_time;
+	unsigned long           irqtype;
+	bool                    enable_wakeup;
+	bool                    no_autorepeat;
+};
+
+/**
+ * struct tc_keypad - data structure used by keypad driver
+ * @tc3589x:    pointer to tc35893
+ * @input:      pointer to input device object
+ * @board:      keypad platform device
+ * @krow:	number of rows
+ * @kcol:	number of columns
+ * @keymap:     matrix scan code table for keycodes
+ * @keypad_stopped: holds keypad status
+ */
+struct tc_keypad {
+	struct tc3589x *tc3589x;
+	struct input_dev *input;
+	const struct tc3589x_keypad_platform_data *board;
+	unsigned int krow;
+	unsigned int kcol;
+	unsigned short *keymap;
+	bool keypad_stopped;
+};
+
+static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
+{
+	int ret;
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	const struct tc3589x_keypad_platform_data *board = keypad->board;
+
+	/* validate platform configuration */
+	if (board->kcol > TC3589x_MAX_KPCOL || board->krow > TC3589x_MAX_KPROW)
+		return -EINVAL;
+
+	/* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE,
+			(board->krow << KP_ROW_SHIFT) | board->kcol);
+	if (ret < 0)
+		return ret;
+
+	/* configure dedicated key config, no dedicated key selected */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_LSB, DEDICATED_KEY_VAL);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_MSB, DEDICATED_KEY_VAL);
+	if (ret < 0)
+		return ret;
+
+	/* Configure settle time */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG,
+				board->settle_time);
+	if (ret < 0)
+		return ret;
+
+	/* Configure debounce time */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE,
+				board->debounce_period);
+	if (ret < 0)
+		return ret;
+
+	/* Start of initialise keypad GPIOs */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_IOCFG, 0x0, IOCFG_IG);
+	if (ret < 0)
+		return ret;
+
+	/* Configure pull-up resistors for all row GPIOs */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_LSB,
+					TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_MSB,
+					TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	/* Configure pull-up resistors for all column GPIOs */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_LSB,
+			TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_MSB,
+			TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG2_LSB,
+			TC3589x_PULLUP_ALL_MASK);
+
+	return ret;
+}
+
+#define TC35893_DATA_REGS		4
+#define TC35893_KEYCODE_FIFO_EMPTY	0x7f
+#define TC35893_KEYCODE_FIFO_CLEAR	0xff
+#define TC35893_KEYPAD_ROW_SHIFT	0x3
+
+static irqreturn_t tc3589x_keypad_irq(int irq, void *dev)
+{
+	struct tc_keypad *keypad = dev;
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	u8 i, row_index, col_index, kbd_code, up;
+	u8 code;
+
+	for (i = 0; i < TC35893_DATA_REGS * 2; i++) {
+		kbd_code = tc3589x_reg_read(tc3589x, TC3589x_EVTCODE_FIFO);
+
+		/* loop till fifo is empty and no more keys are pressed */
+		if (kbd_code == TC35893_KEYCODE_FIFO_EMPTY ||
+				kbd_code == TC35893_KEYCODE_FIFO_CLEAR)
+			continue;
+
+		/* valid key is found */
+		col_index = kbd_code & KP_EVCODE_COL_MASK;
+		row_index = (kbd_code & KP_EVCODE_ROW_MASK) >> KP_ROW_SHIFT;
+		code = MATRIX_SCAN_CODE(row_index, col_index,
+						TC35893_KEYPAD_ROW_SHIFT);
+		up = kbd_code & KP_RELEASE_EVT_MASK;
+
+		input_event(keypad->input, EV_MSC, MSC_SCAN, code);
+		input_report_key(keypad->input, keypad->keymap[code], !up);
+		input_sync(keypad->input);
+	}
+
+	/* clear IRQ */
+	tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+			0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+	/* enable IRQ */
+	tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+			0x0, TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+
+	return IRQ_HANDLED;
+}
+
+static int tc3589x_keypad_enable(struct tc_keypad *keypad)
+{
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	int ret;
+
+	/* pull the keypad module out of reset */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* configure KBDMFS */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMFS, 0x0, TC3589x_KBDMFS_EN);
+	if (ret < 0)
+		return ret;
+
+	/* enable the keypad clock */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x0, KPD_CLK_EN);
+	if (ret < 0)
+		return ret;
+
+	/* clear pending IRQs */
+	ret =  tc3589x_set_bits(tc3589x, TC3589x_RSTINTCLR, 0x0, 0x1);
+	if (ret < 0)
+		return ret;
+
+	/* enable the IRQs */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, 0x0,
+					TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+	if (ret < 0)
+		return ret;
+
+	keypad->keypad_stopped = false;
+
+	return ret;
+}
+
+static int tc3589x_keypad_disable(struct tc_keypad *keypad)
+{
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	int ret;
+
+	/* clear IRQ */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+			0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+	if (ret < 0)
+		return ret;
+
+	/* disable all interrupts */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+			~(TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT), 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* disable the keypad module */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x1, 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* put the keypad module into reset */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x1);
+
+	keypad->keypad_stopped = true;
+
+	return ret;
+}
+
+static int tc3589x_keypad_open(struct input_dev *input)
+{
+	int error;
+	struct tc_keypad *keypad = input_get_drvdata(input);
+
+	/* enable the keypad module */
+	error = tc3589x_keypad_enable(keypad);
+	if (error < 0) {
+		dev_err(&input->dev, "failed to enable keypad module\n");
+		return error;
+	}
+
+	error = tc3589x_keypad_init_key_hardware(keypad);
+	if (error < 0) {
+		dev_err(&input->dev, "failed to configure keypad module\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static void tc3589x_keypad_close(struct input_dev *input)
+{
+	struct tc_keypad *keypad = input_get_drvdata(input);
+
+	/* disable the keypad module */
+	tc3589x_keypad_disable(keypad);
+}
+
+static const struct tc3589x_keypad_platform_data *
+tc3589x_keypad_of_probe(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct tc3589x_keypad_platform_data *plat;
+	u32 cols, rows;
+	u32 debounce_ms;
+	int proplen;
+
+	if (!np)
+		return ERR_PTR(-ENODEV);
+
+	plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
+	if (!plat)
+		return ERR_PTR(-ENOMEM);
+
+	of_property_read_u32(np, "keypad,num-columns", &cols);
+	of_property_read_u32(np, "keypad,num-rows", &rows);
+	plat->kcol = (u8) cols;
+	plat->krow = (u8) rows;
+	if (!plat->krow || !plat->kcol ||
+	     plat->krow > TC_KPD_ROWS || plat->kcol > TC_KPD_COLUMNS) {
+		dev_err(dev,
+			"keypad columns/rows not properly specified (%ux%u)\n",
+			plat->kcol, plat->krow);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!of_get_property(np, "linux,keymap", &proplen)) {
+		dev_err(dev, "property linux,keymap not found\n");
+		return ERR_PTR(-ENOENT);
+	}
+
+	plat->no_autorepeat = of_property_read_bool(np, "linux,no-autorepeat");
+
+	plat->enable_wakeup = of_property_read_bool(np, "wakeup-source") ||
+			      /* legacy name */
+			      of_property_read_bool(np, "linux,wakeup");
+
+	/* The custom delay format is ms/16 */
+	of_property_read_u32(np, "debounce-delay-ms", &debounce_ms);
+	if (debounce_ms)
+		plat->debounce_period = debounce_ms * 16;
+	else
+		plat->debounce_period = TC_KPD_DEBOUNCE_PERIOD;
+
+	plat->settle_time = TC_KPD_SETTLE_TIME;
+	/* FIXME: should be property of the IRQ resource? */
+	plat->irqtype = IRQF_TRIGGER_FALLING;
+
+	return plat;
+}
+
+static int tc3589x_keypad_probe(struct platform_device *pdev)
+{
+	struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
+	struct tc_keypad *keypad;
+	struct input_dev *input;
+	const struct tc3589x_keypad_platform_data *plat;
+	int error, irq;
+
+	plat = tc3589x_keypad_of_probe(&pdev->dev);
+	if (IS_ERR(plat)) {
+		dev_err(&pdev->dev, "invalid keypad platform data\n");
+		return PTR_ERR(plat);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	keypad = devm_kzalloc(&pdev->dev, sizeof(struct tc_keypad),
+			      GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	keypad->board = plat;
+	keypad->input = input;
+	keypad->tc3589x = tc3589x;
+
+	input->id.bustype = BUS_I2C;
+	input->name = pdev->name;
+	input->dev.parent = &pdev->dev;
+
+	input->open = tc3589x_keypad_open;
+	input->close = tc3589x_keypad_close;
+
+	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+					   TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL,
+					   NULL, input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		return error;
+	}
+
+	keypad->keymap = input->keycode;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	if (!plat->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	input_set_drvdata(input, keypad);
+
+	tc3589x_keypad_disable(keypad);
+
+	error = devm_request_threaded_irq(&pdev->dev, irq,
+					  NULL, tc3589x_keypad_irq,
+					  plat->irqtype | IRQF_ONESHOT,
+					  "tc3589x-keypad", keypad);
+	if (error) {
+		dev_err(&pdev->dev,
+				"Could not allocate irq %d,error %d\n",
+				irq, error);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "Could not register input device\n");
+		return error;
+	}
+
+	/* let platform decide if keypad is a wakeup source or not */
+	device_init_wakeup(&pdev->dev, plat->enable_wakeup);
+	device_set_wakeup_capable(&pdev->dev, plat->enable_wakeup);
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tc3589x_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	/* keypad is already off; we do nothing */
+	if (keypad->keypad_stopped)
+		return 0;
+
+	/* if device is not a wakeup source, disable it for powersave */
+	if (!device_may_wakeup(&pdev->dev))
+		tc3589x_keypad_disable(keypad);
+	else
+		enable_irq_wake(irq);
+
+	return 0;
+}
+
+static int tc3589x_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (!keypad->keypad_stopped)
+		return 0;
+
+	/* enable the device to resume normal operations */
+	if (!device_may_wakeup(&pdev->dev))
+		tc3589x_keypad_enable(keypad);
+	else
+		disable_irq_wake(irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tc3589x_keypad_dev_pm_ops,
+			 tc3589x_keypad_suspend, tc3589x_keypad_resume);
+
+static struct platform_driver tc3589x_keypad_driver = {
+	.driver	= {
+		.name	= "tc3589x-keypad",
+		.pm	= &tc3589x_keypad_dev_pm_ops,
+	},
+	.probe	= tc3589x_keypad_probe,
+};
+module_platform_driver(tc3589x_keypad_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jayeeta Banerjee/Sundar Iyer");
+MODULE_DESCRIPTION("TC35893 Keypad Driver");
+MODULE_ALIAS("platform:tc3589x-keypad");
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
new file mode 100644
index 000000000..9b0f9665d
--- /dev/null
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for keys on TCA6416 I2C IO expander
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author : Sriramakrishnan.A.G. <srk@ti.com>
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/tca6416_keypad.h>
+
+#define TCA6416_INPUT          0
+#define TCA6416_OUTPUT         1
+#define TCA6416_INVERT         2
+#define TCA6416_DIRECTION      3
+
+static const struct i2c_device_id tca6416_id[] = {
+	{ "tca6416-keys", 16, },
+	{ "tca6408-keys", 8, },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tca6416_id);
+
+struct tca6416_drv_data {
+	struct input_dev *input;
+	struct tca6416_button data[];
+};
+
+struct tca6416_keypad_chip {
+	uint16_t reg_output;
+	uint16_t reg_direction;
+	uint16_t reg_input;
+
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct delayed_work dwork;
+	int io_size;
+	int irqnum;
+	u16 pinmask;
+	bool use_polling;
+	struct tca6416_button buttons[];
+};
+
+static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg, u16 val)
+{
+	int error;
+
+	error = chip->io_size > 8 ?
+		i2c_smbus_write_word_data(chip->client, reg << 1, val) :
+		i2c_smbus_write_byte_data(chip->client, reg, val);
+	if (error < 0) {
+		dev_err(&chip->client->dev,
+			"%s failed, reg: %d, val: %d, error: %d\n",
+			__func__, reg, val, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val)
+{
+	int retval;
+
+	retval = chip->io_size > 8 ?
+		 i2c_smbus_read_word_data(chip->client, reg << 1) :
+		 i2c_smbus_read_byte_data(chip->client, reg);
+	if (retval < 0) {
+		dev_err(&chip->client->dev, "%s failed, reg: %d, error: %d\n",
+			__func__, reg, retval);
+		return retval;
+	}
+
+	*val = (u16)retval;
+	return 0;
+}
+
+static void tca6416_keys_scan(struct tca6416_keypad_chip *chip)
+{
+	struct input_dev *input = chip->input;
+	u16 reg_val, val;
+	int error, i, pin_index;
+
+	error = tca6416_read_reg(chip, TCA6416_INPUT, &reg_val);
+	if (error)
+		return;
+
+	reg_val &= chip->pinmask;
+
+	/* Figure out which lines have changed */
+	val = reg_val ^ chip->reg_input;
+	chip->reg_input = reg_val;
+
+	for (i = 0, pin_index = 0; i < 16; i++) {
+		if (val & (1 << i)) {
+			struct tca6416_button *button = &chip->buttons[pin_index];
+			unsigned int type = button->type ?: EV_KEY;
+			int state = ((reg_val & (1 << i)) ? 1 : 0)
+						^ button->active_low;
+
+			input_event(input, type, button->code, !!state);
+			input_sync(input);
+		}
+
+		if (chip->pinmask & (1 << i))
+			pin_index++;
+	}
+}
+
+/*
+ * This is threaded IRQ handler and this can (and will) sleep.
+ */
+static irqreturn_t tca6416_keys_isr(int irq, void *dev_id)
+{
+	struct tca6416_keypad_chip *chip = dev_id;
+
+	tca6416_keys_scan(chip);
+
+	return IRQ_HANDLED;
+}
+
+static void tca6416_keys_work_func(struct work_struct *work)
+{
+	struct tca6416_keypad_chip *chip =
+		container_of(work, struct tca6416_keypad_chip, dwork.work);
+
+	tca6416_keys_scan(chip);
+	schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
+}
+
+static int tca6416_keys_open(struct input_dev *dev)
+{
+	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
+
+	/* Get initial device state in case it has switches */
+	tca6416_keys_scan(chip);
+
+	if (chip->use_polling)
+		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
+	else
+		enable_irq(chip->irqnum);
+
+	return 0;
+}
+
+static void tca6416_keys_close(struct input_dev *dev)
+{
+	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
+
+	if (chip->use_polling)
+		cancel_delayed_work_sync(&chip->dwork);
+	else
+		disable_irq(chip->irqnum);
+}
+
+static int tca6416_setup_registers(struct tca6416_keypad_chip *chip)
+{
+	int error;
+
+	error = tca6416_read_reg(chip, TCA6416_OUTPUT, &chip->reg_output);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
+	if (error)
+		return error;
+
+	/* ensure that keypad pins are set to input */
+	error = tca6416_write_reg(chip, TCA6416_DIRECTION,
+				  chip->reg_direction | chip->pinmask);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_INPUT, &chip->reg_input);
+	if (error)
+		return error;
+
+	chip->reg_input &= chip->pinmask;
+
+	return 0;
+}
+
+static int tca6416_keypad_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct tca6416_keys_platform_data *pdata;
+	struct tca6416_keypad_chip *chip;
+	struct input_dev *input;
+	int error;
+	int i;
+
+	/* Check functionality */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
+		dev_err(&client->dev, "%s adapter not supported\n",
+			dev_driver_string(&client->adapter->dev));
+		return -ENODEV;
+	}
+
+	pdata = dev_get_platdata(&client->dev);
+	if (!pdata) {
+		dev_dbg(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	chip = kzalloc(struct_size(chip, buttons, pdata->nbuttons), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!chip || !input) {
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	chip->client = client;
+	chip->input = input;
+	chip->io_size = id->driver_data;
+	chip->pinmask = pdata->pinmask;
+	chip->use_polling = pdata->use_polling;
+
+	INIT_DELAYED_WORK(&chip->dwork, tca6416_keys_work_func);
+
+	input->phys = "tca6416-keys/input0";
+	input->name = client->name;
+	input->dev.parent = &client->dev;
+
+	input->open = tca6416_keys_open;
+	input->close = tca6416_keys_close;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (pdata->rep)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		unsigned int type;
+
+		chip->buttons[i] = pdata->buttons[i];
+		type = (pdata->buttons[i].type) ?: EV_KEY;
+		input_set_capability(input, type, pdata->buttons[i].code);
+	}
+
+	input_set_drvdata(input, chip);
+
+	/*
+	 * Initialize cached registers from their original values.
+	 * we can't share this chip with another i2c master.
+	 */
+	error = tca6416_setup_registers(chip);
+	if (error)
+		goto fail1;
+
+	if (!chip->use_polling) {
+		if (pdata->irq_is_gpio)
+			chip->irqnum = gpio_to_irq(client->irq);
+		else
+			chip->irqnum = client->irq;
+
+		error = request_threaded_irq(chip->irqnum, NULL,
+					     tca6416_keys_isr,
+					     IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+					     "tca6416-keypad", chip);
+		if (error) {
+			dev_dbg(&client->dev,
+				"Unable to claim irq %d; error %d\n",
+				chip->irqnum, error);
+			goto fail1;
+		}
+		disable_irq(chip->irqnum);
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_dbg(&client->dev,
+			"Unable to register input device, error: %d\n", error);
+		goto fail2;
+	}
+
+	i2c_set_clientdata(client, chip);
+	device_init_wakeup(&client->dev, 1);
+
+	return 0;
+
+fail2:
+	if (!chip->use_polling) {
+		free_irq(chip->irqnum, chip);
+		enable_irq(chip->irqnum);
+	}
+fail1:
+	input_free_device(input);
+	kfree(chip);
+	return error;
+}
+
+static int tca6416_keypad_remove(struct i2c_client *client)
+{
+	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
+
+	if (!chip->use_polling) {
+		free_irq(chip->irqnum, chip);
+		enable_irq(chip->irqnum);
+	}
+
+	input_unregister_device(chip->input);
+	kfree(chip);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tca6416_keypad_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(chip->irqnum);
+
+	return 0;
+}
+
+static int tca6416_keypad_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(chip->irqnum);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tca6416_keypad_dev_pm_ops,
+			 tca6416_keypad_suspend, tca6416_keypad_resume);
+
+static struct i2c_driver tca6416_keypad_driver = {
+	.driver = {
+		.name	= "tca6416-keypad",
+		.pm	= &tca6416_keypad_dev_pm_ops,
+	},
+	.probe		= tca6416_keypad_probe,
+	.remove		= tca6416_keypad_remove,
+	.id_table	= tca6416_id,
+};
+
+static int __init tca6416_keypad_init(void)
+{
+	return i2c_add_driver(&tca6416_keypad_driver);
+}
+
+subsys_initcall(tca6416_keypad_init);
+
+static void __exit tca6416_keypad_exit(void)
+{
+	i2c_del_driver(&tca6416_keypad_driver);
+}
+module_exit(tca6416_keypad_exit);
+
+MODULE_AUTHOR("Sriramakrishnan <srk@ti.com>");
+MODULE_DESCRIPTION("Keypad driver over tca6416 IO expander");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
new file mode 100644
index 000000000..3bbd7e652
--- /dev/null
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -0,0 +1,392 @@
+/*
+ * Driver for TCA8418 I2C keyboard
+ *
+ * Copyright (C) 2011 Fuel7, Inc.  All rights reserved.
+ *
+ * Author: Kyle Manna <kyle.manna@fuel7.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ *
+ * If you can't comply with GPLv2, alternative licensing terms may be
+ * arranged. Please contact Fuel7, Inc. (http://fuel7.com/) for proprietary
+ * alternative licensing inquiries.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* TCA8418 hardware limits */
+#define TCA8418_MAX_ROWS	8
+#define TCA8418_MAX_COLS	10
+
+/* TCA8418 register offsets */
+#define REG_CFG			0x01
+#define REG_INT_STAT		0x02
+#define REG_KEY_LCK_EC		0x03
+#define REG_KEY_EVENT_A		0x04
+#define REG_KEY_EVENT_B		0x05
+#define REG_KEY_EVENT_C		0x06
+#define REG_KEY_EVENT_D		0x07
+#define REG_KEY_EVENT_E		0x08
+#define REG_KEY_EVENT_F		0x09
+#define REG_KEY_EVENT_G		0x0A
+#define REG_KEY_EVENT_H		0x0B
+#define REG_KEY_EVENT_I		0x0C
+#define REG_KEY_EVENT_J		0x0D
+#define REG_KP_LCK_TIMER	0x0E
+#define REG_UNLOCK1		0x0F
+#define REG_UNLOCK2		0x10
+#define REG_GPIO_INT_STAT1	0x11
+#define REG_GPIO_INT_STAT2	0x12
+#define REG_GPIO_INT_STAT3	0x13
+#define REG_GPIO_DAT_STAT1	0x14
+#define REG_GPIO_DAT_STAT2	0x15
+#define REG_GPIO_DAT_STAT3	0x16
+#define REG_GPIO_DAT_OUT1	0x17
+#define REG_GPIO_DAT_OUT2	0x18
+#define REG_GPIO_DAT_OUT3	0x19
+#define REG_GPIO_INT_EN1	0x1A
+#define REG_GPIO_INT_EN2	0x1B
+#define REG_GPIO_INT_EN3	0x1C
+#define REG_KP_GPIO1		0x1D
+#define REG_KP_GPIO2		0x1E
+#define REG_KP_GPIO3		0x1F
+#define REG_GPI_EM1		0x20
+#define REG_GPI_EM2		0x21
+#define REG_GPI_EM3		0x22
+#define REG_GPIO_DIR1		0x23
+#define REG_GPIO_DIR2		0x24
+#define REG_GPIO_DIR3		0x25
+#define REG_GPIO_INT_LVL1	0x26
+#define REG_GPIO_INT_LVL2	0x27
+#define REG_GPIO_INT_LVL3	0x28
+#define REG_DEBOUNCE_DIS1	0x29
+#define REG_DEBOUNCE_DIS2	0x2A
+#define REG_DEBOUNCE_DIS3	0x2B
+#define REG_GPIO_PULL1		0x2C
+#define REG_GPIO_PULL2		0x2D
+#define REG_GPIO_PULL3		0x2E
+
+/* TCA8418 bit definitions */
+#define CFG_AI			BIT(7)
+#define CFG_GPI_E_CFG		BIT(6)
+#define CFG_OVR_FLOW_M		BIT(5)
+#define CFG_INT_CFG		BIT(4)
+#define CFG_OVR_FLOW_IEN	BIT(3)
+#define CFG_K_LCK_IEN		BIT(2)
+#define CFG_GPI_IEN		BIT(1)
+#define CFG_KE_IEN		BIT(0)
+
+#define INT_STAT_CAD_INT	BIT(4)
+#define INT_STAT_OVR_FLOW_INT	BIT(3)
+#define INT_STAT_K_LCK_INT	BIT(2)
+#define INT_STAT_GPI_INT	BIT(1)
+#define INT_STAT_K_INT		BIT(0)
+
+/* TCA8418 register masks */
+#define KEY_LCK_EC_KEC		0x7
+#define KEY_EVENT_CODE		0x7f
+#define KEY_EVENT_VALUE		0x80
+
+struct tca8418_keypad {
+	struct i2c_client *client;
+	struct input_dev *input;
+
+	unsigned int row_shift;
+};
+
+/*
+ * Write a byte to the TCA8418
+ */
+static int tca8418_write_byte(struct tca8418_keypad *keypad_data,
+			      int reg, u8 val)
+{
+	int error;
+
+	error = i2c_smbus_write_byte_data(keypad_data->client, reg, val);
+	if (error < 0) {
+		dev_err(&keypad_data->client->dev,
+			"%s failed, reg: %d, val: %d, error: %d\n",
+			__func__, reg, val, error);
+		return error;
+	}
+
+	return 0;
+}
+
+/*
+ * Read a byte from the TCA8418
+ */
+static int tca8418_read_byte(struct tca8418_keypad *keypad_data,
+			     int reg, u8 *val)
+{
+	int error;
+
+	error = i2c_smbus_read_byte_data(keypad_data->client, reg);
+	if (error < 0) {
+		dev_err(&keypad_data->client->dev,
+				"%s failed, reg: %d, error: %d\n",
+				__func__, reg, error);
+		return error;
+	}
+
+	*val = (u8)error;
+
+	return 0;
+}
+
+static void tca8418_read_keypad(struct tca8418_keypad *keypad_data)
+{
+	struct input_dev *input = keypad_data->input;
+	unsigned short *keymap = input->keycode;
+	int error, col, row;
+	u8 reg, state, code;
+
+	do {
+		error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, &reg);
+		if (error < 0) {
+			dev_err(&keypad_data->client->dev,
+				"unable to read REG_KEY_EVENT_A\n");
+			break;
+		}
+
+		/* Assume that key code 0 signifies empty FIFO */
+		if (reg <= 0)
+			break;
+
+		state = reg & KEY_EVENT_VALUE;
+		code  = reg & KEY_EVENT_CODE;
+
+		row = code / TCA8418_MAX_COLS;
+		col = code % TCA8418_MAX_COLS;
+
+		row = (col) ? row : row - 1;
+		col = (col) ? col - 1 : TCA8418_MAX_COLS - 1;
+
+		code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift);
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keymap[code], state);
+
+	} while (1);
+
+	input_sync(input);
+}
+
+/*
+ * Threaded IRQ handler and this can (and will) sleep.
+ */
+static irqreturn_t tca8418_irq_handler(int irq, void *dev_id)
+{
+	struct tca8418_keypad *keypad_data = dev_id;
+	u8 reg;
+	int error;
+
+	error = tca8418_read_byte(keypad_data, REG_INT_STAT, &reg);
+	if (error) {
+		dev_err(&keypad_data->client->dev,
+			"unable to read REG_INT_STAT\n");
+		return IRQ_NONE;
+	}
+
+	if (!reg)
+		return IRQ_NONE;
+
+	if (reg & INT_STAT_OVR_FLOW_INT)
+		dev_warn(&keypad_data->client->dev, "overflow occurred\n");
+
+	if (reg & INT_STAT_K_INT)
+		tca8418_read_keypad(keypad_data);
+
+	/* Clear all interrupts, even IRQs we didn't check (GPI, CAD, LCK) */
+	reg = 0xff;
+	error = tca8418_write_byte(keypad_data, REG_INT_STAT, reg);
+	if (error)
+		dev_err(&keypad_data->client->dev,
+			"unable to clear REG_INT_STAT\n");
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Configure the TCA8418 for keypad operation
+ */
+static int tca8418_configure(struct tca8418_keypad *keypad_data,
+			     u32 rows, u32 cols)
+{
+	int reg, error = 0;
+
+	/* Assemble a mask for row and column registers */
+	reg  =  ~(~0 << rows);
+	reg += (~(~0 << cols)) << 8;
+
+	/* Set registers to keypad mode */
+	error |= tca8418_write_byte(keypad_data, REG_KP_GPIO1, reg);
+	error |= tca8418_write_byte(keypad_data, REG_KP_GPIO2, reg >> 8);
+	error |= tca8418_write_byte(keypad_data, REG_KP_GPIO3, reg >> 16);
+
+	/* Enable column debouncing */
+	error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS1, reg);
+	error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS2, reg >> 8);
+	error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS3, reg >> 16);
+
+	if (error)
+		return error;
+
+	error = tca8418_write_byte(keypad_data, REG_CFG,
+				CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN);
+
+	return error;
+}
+
+static int tca8418_keypad_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct tca8418_keypad *keypad_data;
+	struct input_dev *input;
+	u32 rows = 0, cols = 0;
+	int error, row_shift;
+	u8 reg;
+
+	/* Check i2c driver capabilities */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
+		dev_err(dev, "%s adapter not supported\n",
+			dev_driver_string(&client->adapter->dev));
+		return -ENODEV;
+	}
+
+	error = matrix_keypad_parse_properties(dev, &rows, &cols);
+	if (error)
+		return error;
+
+	if (!rows || rows > TCA8418_MAX_ROWS) {
+		dev_err(dev, "invalid rows\n");
+		return -EINVAL;
+	}
+
+	if (!cols || cols > TCA8418_MAX_COLS) {
+		dev_err(dev, "invalid columns\n");
+		return -EINVAL;
+	}
+
+	row_shift = get_count_order(cols);
+
+	/* Allocate memory for keypad_data and input device */
+	keypad_data = devm_kzalloc(dev, sizeof(*keypad_data), GFP_KERNEL);
+	if (!keypad_data)
+		return -ENOMEM;
+
+	keypad_data->client = client;
+	keypad_data->row_shift = row_shift;
+
+	/* Read key lock register, if this fails assume device not present */
+	error = tca8418_read_byte(keypad_data, REG_KEY_LCK_EC, &reg);
+	if (error)
+		return -ENODEV;
+
+	/* Configure input device */
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	keypad_data->input = input;
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->id.vendor  = 0x0001;
+	input->id.product = 0x001;
+	input->id.version = 0x0001;
+
+	error = matrix_keypad_build_keymap(NULL, NULL, rows, cols, NULL, input);
+	if (error) {
+		dev_err(dev, "Failed to build keymap\n");
+		return error;
+	}
+
+	if (device_property_read_bool(dev, "keypad,autorepeat"))
+		__set_bit(EV_REP, input->evbit);
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	error = devm_request_threaded_irq(dev, client->irq,
+					  NULL, tca8418_irq_handler,
+					  IRQF_SHARED | IRQF_ONESHOT,
+					  client->name, keypad_data);
+	if (error) {
+		dev_err(dev, "Unable to claim irq %d; error %d\n",
+			client->irq, error);
+		return error;
+	}
+
+	/* Initialize the chip */
+	error = tca8418_configure(keypad_data, rows, cols);
+	if (error < 0)
+		return error;
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "Unable to register input device, error: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id tca8418_id[] = {
+	{ "tca8418", 8418, },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tca8418_id);
+
+static const struct of_device_id tca8418_dt_ids[] = {
+	{ .compatible = "ti,tca8418", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tca8418_dt_ids);
+
+static struct i2c_driver tca8418_keypad_driver = {
+	.driver = {
+		.name	= "tca8418_keypad",
+		.of_match_table = tca8418_dt_ids,
+	},
+	.probe		= tca8418_keypad_probe,
+	.id_table	= tca8418_id,
+};
+
+static int __init tca8418_keypad_init(void)
+{
+	return i2c_add_driver(&tca8418_keypad_driver);
+}
+subsys_initcall(tca8418_keypad_init);
+
+static void __exit tca8418_keypad_exit(void)
+{
+	i2c_del_driver(&tca8418_keypad_driver);
+}
+module_exit(tca8418_keypad_exit);
+
+MODULE_AUTHOR("Kyle Manna <kyle.manna@fuel7.com>");
+MODULE_DESCRIPTION("Keypad driver for TCA8418");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
new file mode 100644
index 000000000..d34d69479
--- /dev/null
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -0,0 +1,823 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Keyboard class input driver for the NVIDIA Tegra SoC internal matrix
+ * keyboard controller
+ *
+ * Copyright (c) 2009-2011, NVIDIA Corporation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/reset.h>
+#include <linux/err.h>
+
+#define KBC_MAX_KPENT	8
+
+/* Maximum row/column supported by Tegra KBC yet  is 16x8 */
+#define KBC_MAX_GPIO	24
+/* Maximum keys supported by Tegra KBC yet is 16 x 8*/
+#define KBC_MAX_KEY	(16 * 8)
+
+#define KBC_MAX_DEBOUNCE_CNT	0x3ffu
+
+/* KBC row scan time and delay for beginning the row scan. */
+#define KBC_ROW_SCAN_TIME	16
+#define KBC_ROW_SCAN_DLY	5
+
+/* KBC uses a 32KHz clock so a cycle = 1/32Khz */
+#define KBC_CYCLE_MS	32
+
+/* KBC Registers */
+
+/* KBC Control Register */
+#define KBC_CONTROL_0	0x0
+#define KBC_FIFO_TH_CNT_SHIFT(cnt)	(cnt << 14)
+#define KBC_DEBOUNCE_CNT_SHIFT(cnt)	(cnt << 4)
+#define KBC_CONTROL_FIFO_CNT_INT_EN	(1 << 3)
+#define KBC_CONTROL_KEYPRESS_INT_EN	(1 << 1)
+#define KBC_CONTROL_KBC_EN		(1 << 0)
+
+/* KBC Interrupt Register */
+#define KBC_INT_0	0x4
+#define KBC_INT_FIFO_CNT_INT_STATUS	(1 << 2)
+#define KBC_INT_KEYPRESS_INT_STATUS	(1 << 0)
+
+#define KBC_ROW_CFG0_0	0x8
+#define KBC_COL_CFG0_0	0x18
+#define KBC_TO_CNT_0	0x24
+#define KBC_INIT_DLY_0	0x28
+#define KBC_RPT_DLY_0	0x2c
+#define KBC_KP_ENT0_0	0x30
+#define KBC_KP_ENT1_0	0x34
+#define KBC_ROW0_MASK_0	0x38
+
+#define KBC_ROW_SHIFT	3
+
+enum tegra_pin_type {
+	PIN_CFG_IGNORE,
+	PIN_CFG_COL,
+	PIN_CFG_ROW,
+};
+
+/* Tegra KBC hw support */
+struct tegra_kbc_hw_support {
+	int max_rows;
+	int max_columns;
+};
+
+struct tegra_kbc_pin_cfg {
+	enum tegra_pin_type type;
+	unsigned char num;
+};
+
+struct tegra_kbc {
+	struct device *dev;
+	unsigned int debounce_cnt;
+	unsigned int repeat_cnt;
+	struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
+	const struct matrix_keymap_data *keymap_data;
+	bool wakeup;
+	void __iomem *mmio;
+	struct input_dev *idev;
+	int irq;
+	spinlock_t lock;
+	unsigned int repoll_dly;
+	unsigned long cp_dly_jiffies;
+	unsigned int cp_to_wkup_dly;
+	bool use_fn_map;
+	bool use_ghost_filter;
+	bool keypress_caused_wake;
+	unsigned short keycode[KBC_MAX_KEY * 2];
+	unsigned short current_keys[KBC_MAX_KPENT];
+	unsigned int num_pressed_keys;
+	u32 wakeup_key;
+	struct timer_list timer;
+	struct clk *clk;
+	struct reset_control *rst;
+	const struct tegra_kbc_hw_support *hw_support;
+	int max_keys;
+	int num_rows_and_columns;
+};
+
+static void tegra_kbc_report_released_keys(struct input_dev *input,
+					   unsigned short old_keycodes[],
+					   unsigned int old_num_keys,
+					   unsigned short new_keycodes[],
+					   unsigned int new_num_keys)
+{
+	unsigned int i, j;
+
+	for (i = 0; i < old_num_keys; i++) {
+		for (j = 0; j < new_num_keys; j++)
+			if (old_keycodes[i] == new_keycodes[j])
+				break;
+
+		if (j == new_num_keys)
+			input_report_key(input, old_keycodes[i], 0);
+	}
+}
+
+static void tegra_kbc_report_pressed_keys(struct input_dev *input,
+					  unsigned char scancodes[],
+					  unsigned short keycodes[],
+					  unsigned int num_pressed_keys)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_pressed_keys; i++) {
+		input_event(input, EV_MSC, MSC_SCAN, scancodes[i]);
+		input_report_key(input, keycodes[i], 1);
+	}
+}
+
+static void tegra_kbc_report_keys(struct tegra_kbc *kbc)
+{
+	unsigned char scancodes[KBC_MAX_KPENT];
+	unsigned short keycodes[KBC_MAX_KPENT];
+	u32 val = 0;
+	unsigned int i;
+	unsigned int num_down = 0;
+	bool fn_keypress = false;
+	bool key_in_same_row = false;
+	bool key_in_same_col = false;
+
+	for (i = 0; i < KBC_MAX_KPENT; i++) {
+		if ((i % 4) == 0)
+			val = readl(kbc->mmio + KBC_KP_ENT0_0 + i);
+
+		if (val & 0x80) {
+			unsigned int col = val & 0x07;
+			unsigned int row = (val >> 3) & 0x0f;
+			unsigned char scancode =
+				MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT);
+
+			scancodes[num_down] = scancode;
+			keycodes[num_down] = kbc->keycode[scancode];
+			/* If driver uses Fn map, do not report the Fn key. */
+			if ((keycodes[num_down] == KEY_FN) && kbc->use_fn_map)
+				fn_keypress = true;
+			else
+				num_down++;
+		}
+
+		val >>= 8;
+	}
+
+	/*
+	 * Matrix keyboard designs are prone to keyboard ghosting.
+	 * Ghosting occurs if there are 3 keys such that -
+	 * any 2 of the 3 keys share a row, and any 2 of them share a column.
+	 * If so ignore the key presses for this iteration.
+	 */
+	if (kbc->use_ghost_filter && num_down >= 3) {
+		for (i = 0; i < num_down; i++) {
+			unsigned int j;
+			u8 curr_col = scancodes[i] & 0x07;
+			u8 curr_row = scancodes[i] >> KBC_ROW_SHIFT;
+
+			/*
+			 * Find 2 keys such that one key is in the same row
+			 * and the other is in the same column as the i-th key.
+			 */
+			for (j = i + 1; j < num_down; j++) {
+				u8 col = scancodes[j] & 0x07;
+				u8 row = scancodes[j] >> KBC_ROW_SHIFT;
+
+				if (col == curr_col)
+					key_in_same_col = true;
+				if (row == curr_row)
+					key_in_same_row = true;
+			}
+		}
+	}
+
+	/*
+	 * If the platform uses Fn keymaps, translate keys on a Fn keypress.
+	 * Function keycodes are max_keys apart from the plain keycodes.
+	 */
+	if (fn_keypress) {
+		for (i = 0; i < num_down; i++) {
+			scancodes[i] += kbc->max_keys;
+			keycodes[i] = kbc->keycode[scancodes[i]];
+		}
+	}
+
+	/* Ignore the key presses for this iteration? */
+	if (key_in_same_col && key_in_same_row)
+		return;
+
+	tegra_kbc_report_released_keys(kbc->idev,
+				       kbc->current_keys, kbc->num_pressed_keys,
+				       keycodes, num_down);
+	tegra_kbc_report_pressed_keys(kbc->idev, scancodes, keycodes, num_down);
+	input_sync(kbc->idev);
+
+	memcpy(kbc->current_keys, keycodes, sizeof(kbc->current_keys));
+	kbc->num_pressed_keys = num_down;
+}
+
+static void tegra_kbc_set_fifo_interrupt(struct tegra_kbc *kbc, bool enable)
+{
+	u32 val;
+
+	val = readl(kbc->mmio + KBC_CONTROL_0);
+	if (enable)
+		val |= KBC_CONTROL_FIFO_CNT_INT_EN;
+	else
+		val &= ~KBC_CONTROL_FIFO_CNT_INT_EN;
+	writel(val, kbc->mmio + KBC_CONTROL_0);
+}
+
+static void tegra_kbc_keypress_timer(struct timer_list *t)
+{
+	struct tegra_kbc *kbc = from_timer(kbc, t, timer);
+	unsigned long flags;
+	u32 val;
+	unsigned int i;
+
+	spin_lock_irqsave(&kbc->lock, flags);
+
+	val = (readl(kbc->mmio + KBC_INT_0) >> 4) & 0xf;
+	if (val) {
+		unsigned long dly;
+
+		tegra_kbc_report_keys(kbc);
+
+		/*
+		 * If more than one keys are pressed we need not wait
+		 * for the repoll delay.
+		 */
+		dly = (val == 1) ? kbc->repoll_dly : 1;
+		mod_timer(&kbc->timer, jiffies + msecs_to_jiffies(dly));
+	} else {
+		/* Release any pressed keys and exit the polling loop */
+		for (i = 0; i < kbc->num_pressed_keys; i++)
+			input_report_key(kbc->idev, kbc->current_keys[i], 0);
+		input_sync(kbc->idev);
+
+		kbc->num_pressed_keys = 0;
+
+		/* All keys are released so enable the keypress interrupt */
+		tegra_kbc_set_fifo_interrupt(kbc, true);
+	}
+
+	spin_unlock_irqrestore(&kbc->lock, flags);
+}
+
+static irqreturn_t tegra_kbc_isr(int irq, void *args)
+{
+	struct tegra_kbc *kbc = args;
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&kbc->lock, flags);
+
+	/*
+	 * Quickly bail out & reenable interrupts if the fifo threshold
+	 * count interrupt wasn't the interrupt source
+	 */
+	val = readl(kbc->mmio + KBC_INT_0);
+	writel(val, kbc->mmio + KBC_INT_0);
+
+	if (val & KBC_INT_FIFO_CNT_INT_STATUS) {
+		/*
+		 * Until all keys are released, defer further processing to
+		 * the polling loop in tegra_kbc_keypress_timer.
+		 */
+		tegra_kbc_set_fifo_interrupt(kbc, false);
+		mod_timer(&kbc->timer, jiffies + kbc->cp_dly_jiffies);
+	} else if (val & KBC_INT_KEYPRESS_INT_STATUS) {
+		/* We can be here only through system resume path */
+		kbc->keypress_caused_wake = true;
+	}
+
+	spin_unlock_irqrestore(&kbc->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void tegra_kbc_setup_wakekeys(struct tegra_kbc *kbc, bool filter)
+{
+	int i;
+	unsigned int rst_val;
+
+	/* Either mask all keys or none. */
+	rst_val = (filter && !kbc->wakeup) ? ~0 : 0;
+
+	for (i = 0; i < kbc->hw_support->max_rows; i++)
+		writel(rst_val, kbc->mmio + KBC_ROW0_MASK_0 + i * 4);
+}
+
+static void tegra_kbc_config_pins(struct tegra_kbc *kbc)
+{
+	int i;
+
+	for (i = 0; i < KBC_MAX_GPIO; i++) {
+		u32 r_shft = 5 * (i % 6);
+		u32 c_shft = 4 * (i % 8);
+		u32 r_mask = 0x1f << r_shft;
+		u32 c_mask = 0x0f << c_shft;
+		u32 r_offs = (i / 6) * 4 + KBC_ROW_CFG0_0;
+		u32 c_offs = (i / 8) * 4 + KBC_COL_CFG0_0;
+		u32 row_cfg = readl(kbc->mmio + r_offs);
+		u32 col_cfg = readl(kbc->mmio + c_offs);
+
+		row_cfg &= ~r_mask;
+		col_cfg &= ~c_mask;
+
+		switch (kbc->pin_cfg[i].type) {
+		case PIN_CFG_ROW:
+			row_cfg |= ((kbc->pin_cfg[i].num << 1) | 1) << r_shft;
+			break;
+
+		case PIN_CFG_COL:
+			col_cfg |= ((kbc->pin_cfg[i].num << 1) | 1) << c_shft;
+			break;
+
+		case PIN_CFG_IGNORE:
+			break;
+		}
+
+		writel(row_cfg, kbc->mmio + r_offs);
+		writel(col_cfg, kbc->mmio + c_offs);
+	}
+}
+
+static int tegra_kbc_start(struct tegra_kbc *kbc)
+{
+	unsigned int debounce_cnt;
+	u32 val = 0;
+	int ret;
+
+	ret = clk_prepare_enable(kbc->clk);
+	if (ret)
+		return ret;
+
+	/* Reset the KBC controller to clear all previous status.*/
+	reset_control_assert(kbc->rst);
+	udelay(100);
+	reset_control_deassert(kbc->rst);
+	udelay(100);
+
+	tegra_kbc_config_pins(kbc);
+	tegra_kbc_setup_wakekeys(kbc, false);
+
+	writel(kbc->repeat_cnt, kbc->mmio + KBC_RPT_DLY_0);
+
+	/* Keyboard debounce count is maximum of 12 bits. */
+	debounce_cnt = min(kbc->debounce_cnt, KBC_MAX_DEBOUNCE_CNT);
+	val = KBC_DEBOUNCE_CNT_SHIFT(debounce_cnt);
+	val |= KBC_FIFO_TH_CNT_SHIFT(1); /* set fifo interrupt threshold to 1 */
+	val |= KBC_CONTROL_FIFO_CNT_INT_EN;  /* interrupt on FIFO threshold */
+	val |= KBC_CONTROL_KBC_EN;     /* enable */
+	writel(val, kbc->mmio + KBC_CONTROL_0);
+
+	/*
+	 * Compute the delay(ns) from interrupt mode to continuous polling
+	 * mode so the timer routine is scheduled appropriately.
+	 */
+	val = readl(kbc->mmio + KBC_INIT_DLY_0);
+	kbc->cp_dly_jiffies = usecs_to_jiffies((val & 0xfffff) * 32);
+
+	kbc->num_pressed_keys = 0;
+
+	/*
+	 * Atomically clear out any remaining entries in the key FIFO
+	 * and enable keyboard interrupts.
+	 */
+	while (1) {
+		val = readl(kbc->mmio + KBC_INT_0);
+		val >>= 4;
+		if (!val)
+			break;
+
+		val = readl(kbc->mmio + KBC_KP_ENT0_0);
+		val = readl(kbc->mmio + KBC_KP_ENT1_0);
+	}
+	writel(0x7, kbc->mmio + KBC_INT_0);
+
+	enable_irq(kbc->irq);
+
+	return 0;
+}
+
+static void tegra_kbc_stop(struct tegra_kbc *kbc)
+{
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&kbc->lock, flags);
+	val = readl(kbc->mmio + KBC_CONTROL_0);
+	val &= ~1;
+	writel(val, kbc->mmio + KBC_CONTROL_0);
+	spin_unlock_irqrestore(&kbc->lock, flags);
+
+	disable_irq(kbc->irq);
+	del_timer_sync(&kbc->timer);
+
+	clk_disable_unprepare(kbc->clk);
+}
+
+static int tegra_kbc_open(struct input_dev *dev)
+{
+	struct tegra_kbc *kbc = input_get_drvdata(dev);
+
+	return tegra_kbc_start(kbc);
+}
+
+static void tegra_kbc_close(struct input_dev *dev)
+{
+	struct tegra_kbc *kbc = input_get_drvdata(dev);
+
+	return tegra_kbc_stop(kbc);
+}
+
+static bool tegra_kbc_check_pin_cfg(const struct tegra_kbc *kbc,
+					unsigned int *num_rows)
+{
+	int i;
+
+	*num_rows = 0;
+
+	for (i = 0; i < KBC_MAX_GPIO; i++) {
+		const struct tegra_kbc_pin_cfg *pin_cfg = &kbc->pin_cfg[i];
+
+		switch (pin_cfg->type) {
+		case PIN_CFG_ROW:
+			if (pin_cfg->num >= kbc->hw_support->max_rows) {
+				dev_err(kbc->dev,
+					"pin_cfg[%d]: invalid row number %d\n",
+					i, pin_cfg->num);
+				return false;
+			}
+			(*num_rows)++;
+			break;
+
+		case PIN_CFG_COL:
+			if (pin_cfg->num >= kbc->hw_support->max_columns) {
+				dev_err(kbc->dev,
+					"pin_cfg[%d]: invalid column number %d\n",
+					i, pin_cfg->num);
+				return false;
+			}
+			break;
+
+		case PIN_CFG_IGNORE:
+			break;
+
+		default:
+			dev_err(kbc->dev,
+				"pin_cfg[%d]: invalid entry type %d\n",
+				pin_cfg->type, pin_cfg->num);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+static int tegra_kbc_parse_dt(struct tegra_kbc *kbc)
+{
+	struct device_node *np = kbc->dev->of_node;
+	u32 prop;
+	int i;
+	u32 num_rows = 0;
+	u32 num_cols = 0;
+	u32 cols_cfg[KBC_MAX_GPIO];
+	u32 rows_cfg[KBC_MAX_GPIO];
+	int proplen;
+	int ret;
+
+	if (!of_property_read_u32(np, "nvidia,debounce-delay-ms", &prop))
+		kbc->debounce_cnt = prop;
+
+	if (!of_property_read_u32(np, "nvidia,repeat-delay-ms", &prop))
+		kbc->repeat_cnt = prop;
+
+	if (of_find_property(np, "nvidia,needs-ghost-filter", NULL))
+		kbc->use_ghost_filter = true;
+
+	if (of_property_read_bool(np, "wakeup-source") ||
+	    of_property_read_bool(np, "nvidia,wakeup-source")) /* legacy */
+		kbc->wakeup = true;
+
+	if (!of_get_property(np, "nvidia,kbc-row-pins", &proplen)) {
+		dev_err(kbc->dev, "property nvidia,kbc-row-pins not found\n");
+		return -ENOENT;
+	}
+	num_rows = proplen / sizeof(u32);
+
+	if (!of_get_property(np, "nvidia,kbc-col-pins", &proplen)) {
+		dev_err(kbc->dev, "property nvidia,kbc-col-pins not found\n");
+		return -ENOENT;
+	}
+	num_cols = proplen / sizeof(u32);
+
+	if (num_rows > kbc->hw_support->max_rows) {
+		dev_err(kbc->dev,
+			"Number of rows is more than supported by hardware\n");
+		return -EINVAL;
+	}
+
+	if (num_cols > kbc->hw_support->max_columns) {
+		dev_err(kbc->dev,
+			"Number of cols is more than supported by hardware\n");
+		return -EINVAL;
+	}
+
+	if (!of_get_property(np, "linux,keymap", &proplen)) {
+		dev_err(kbc->dev, "property linux,keymap not found\n");
+		return -ENOENT;
+	}
+
+	if (!num_rows || !num_cols || ((num_rows + num_cols) > KBC_MAX_GPIO)) {
+		dev_err(kbc->dev,
+			"keypad rows/columns not properly specified\n");
+		return -EINVAL;
+	}
+
+	/* Set all pins as non-configured */
+	for (i = 0; i < kbc->num_rows_and_columns; i++)
+		kbc->pin_cfg[i].type = PIN_CFG_IGNORE;
+
+	ret = of_property_read_u32_array(np, "nvidia,kbc-row-pins",
+				rows_cfg, num_rows);
+	if (ret < 0) {
+		dev_err(kbc->dev, "Rows configurations are not proper\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32_array(np, "nvidia,kbc-col-pins",
+				cols_cfg, num_cols);
+	if (ret < 0) {
+		dev_err(kbc->dev, "Cols configurations are not proper\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num_rows; i++) {
+		kbc->pin_cfg[rows_cfg[i]].type = PIN_CFG_ROW;
+		kbc->pin_cfg[rows_cfg[i]].num = i;
+	}
+
+	for (i = 0; i < num_cols; i++) {
+		kbc->pin_cfg[cols_cfg[i]].type = PIN_CFG_COL;
+		kbc->pin_cfg[cols_cfg[i]].num = i;
+	}
+
+	return 0;
+}
+
+static const struct tegra_kbc_hw_support tegra20_kbc_hw_support = {
+	.max_rows	= 16,
+	.max_columns	= 8,
+};
+
+static const struct tegra_kbc_hw_support tegra11_kbc_hw_support = {
+	.max_rows	= 11,
+	.max_columns	= 8,
+};
+
+static const struct of_device_id tegra_kbc_of_match[] = {
+	{ .compatible = "nvidia,tegra114-kbc", .data = &tegra11_kbc_hw_support},
+	{ .compatible = "nvidia,tegra30-kbc", .data = &tegra20_kbc_hw_support},
+	{ .compatible = "nvidia,tegra20-kbc", .data = &tegra20_kbc_hw_support},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra_kbc_of_match);
+
+static int tegra_kbc_probe(struct platform_device *pdev)
+{
+	struct tegra_kbc *kbc;
+	struct resource *res;
+	int err;
+	int num_rows = 0;
+	unsigned int debounce_cnt;
+	unsigned int scan_time_rows;
+	unsigned int keymap_rows;
+	const struct of_device_id *match;
+
+	match = of_match_device(tegra_kbc_of_match, &pdev->dev);
+
+	kbc = devm_kzalloc(&pdev->dev, sizeof(*kbc), GFP_KERNEL);
+	if (!kbc) {
+		dev_err(&pdev->dev, "failed to alloc memory for kbc\n");
+		return -ENOMEM;
+	}
+
+	kbc->dev = &pdev->dev;
+	kbc->hw_support = match->data;
+	kbc->max_keys = kbc->hw_support->max_rows *
+				kbc->hw_support->max_columns;
+	kbc->num_rows_and_columns = kbc->hw_support->max_rows +
+					kbc->hw_support->max_columns;
+	keymap_rows = kbc->max_keys;
+	spin_lock_init(&kbc->lock);
+
+	err = tegra_kbc_parse_dt(kbc);
+	if (err)
+		return err;
+
+	if (!tegra_kbc_check_pin_cfg(kbc, &num_rows))
+		return -EINVAL;
+
+	kbc->irq = platform_get_irq(pdev, 0);
+	if (kbc->irq < 0)
+		return -ENXIO;
+
+	kbc->idev = devm_input_allocate_device(&pdev->dev);
+	if (!kbc->idev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	timer_setup(&kbc->timer, tegra_kbc_keypress_timer, 0);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	kbc->mmio = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kbc->mmio))
+		return PTR_ERR(kbc->mmio);
+
+	kbc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kbc->clk)) {
+		dev_err(&pdev->dev, "failed to get keyboard clock\n");
+		return PTR_ERR(kbc->clk);
+	}
+
+	kbc->rst = devm_reset_control_get(&pdev->dev, "kbc");
+	if (IS_ERR(kbc->rst)) {
+		dev_err(&pdev->dev, "failed to get keyboard reset\n");
+		return PTR_ERR(kbc->rst);
+	}
+
+	/*
+	 * The time delay between two consecutive reads of the FIFO is
+	 * the sum of the repeat time and the time taken for scanning
+	 * the rows. There is an additional delay before the row scanning
+	 * starts. The repoll delay is computed in milliseconds.
+	 */
+	debounce_cnt = min(kbc->debounce_cnt, KBC_MAX_DEBOUNCE_CNT);
+	scan_time_rows = (KBC_ROW_SCAN_TIME + debounce_cnt) * num_rows;
+	kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + kbc->repeat_cnt;
+	kbc->repoll_dly = DIV_ROUND_UP(kbc->repoll_dly, KBC_CYCLE_MS);
+
+	kbc->idev->name = pdev->name;
+	kbc->idev->id.bustype = BUS_HOST;
+	kbc->idev->dev.parent = &pdev->dev;
+	kbc->idev->open = tegra_kbc_open;
+	kbc->idev->close = tegra_kbc_close;
+
+	if (kbc->keymap_data && kbc->use_fn_map)
+		keymap_rows *= 2;
+
+	err = matrix_keypad_build_keymap(kbc->keymap_data, NULL,
+					 keymap_rows,
+					 kbc->hw_support->max_columns,
+					 kbc->keycode, kbc->idev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to setup keymap\n");
+		return err;
+	}
+
+	__set_bit(EV_REP, kbc->idev->evbit);
+	input_set_capability(kbc->idev, EV_MSC, MSC_SCAN);
+
+	input_set_drvdata(kbc->idev, kbc);
+
+	err = devm_request_irq(&pdev->dev, kbc->irq, tegra_kbc_isr,
+			       IRQF_TRIGGER_HIGH, pdev->name, kbc);
+	if (err) {
+		dev_err(&pdev->dev, "failed to request keyboard IRQ\n");
+		return err;
+	}
+
+	disable_irq(kbc->irq);
+
+	err = input_register_device(kbc->idev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return err;
+	}
+
+	platform_set_drvdata(pdev, kbc);
+	device_init_wakeup(&pdev->dev, kbc->wakeup);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void tegra_kbc_set_keypress_interrupt(struct tegra_kbc *kbc, bool enable)
+{
+	u32 val;
+
+	val = readl(kbc->mmio + KBC_CONTROL_0);
+	if (enable)
+		val |= KBC_CONTROL_KEYPRESS_INT_EN;
+	else
+		val &= ~KBC_CONTROL_KEYPRESS_INT_EN;
+	writel(val, kbc->mmio + KBC_CONTROL_0);
+}
+
+static int tegra_kbc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tegra_kbc *kbc = platform_get_drvdata(pdev);
+
+	mutex_lock(&kbc->idev->mutex);
+	if (device_may_wakeup(&pdev->dev)) {
+		disable_irq(kbc->irq);
+		del_timer_sync(&kbc->timer);
+		tegra_kbc_set_fifo_interrupt(kbc, false);
+
+		/* Forcefully clear the interrupt status */
+		writel(0x7, kbc->mmio + KBC_INT_0);
+		/*
+		 * Store the previous resident time of continuous polling mode.
+		 * Force the keyboard into interrupt mode.
+		 */
+		kbc->cp_to_wkup_dly = readl(kbc->mmio + KBC_TO_CNT_0);
+		writel(0, kbc->mmio + KBC_TO_CNT_0);
+
+		tegra_kbc_setup_wakekeys(kbc, true);
+		msleep(30);
+
+		kbc->keypress_caused_wake = false;
+		/* Enable keypress interrupt before going into suspend. */
+		tegra_kbc_set_keypress_interrupt(kbc, true);
+		enable_irq(kbc->irq);
+		enable_irq_wake(kbc->irq);
+	} else {
+		if (kbc->idev->users)
+			tegra_kbc_stop(kbc);
+	}
+	mutex_unlock(&kbc->idev->mutex);
+
+	return 0;
+}
+
+static int tegra_kbc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tegra_kbc *kbc = platform_get_drvdata(pdev);
+	int err = 0;
+
+	mutex_lock(&kbc->idev->mutex);
+	if (device_may_wakeup(&pdev->dev)) {
+		disable_irq_wake(kbc->irq);
+		tegra_kbc_setup_wakekeys(kbc, false);
+		/* We will use fifo interrupts for key detection. */
+		tegra_kbc_set_keypress_interrupt(kbc, false);
+
+		/* Restore the resident time of continuous polling mode. */
+		writel(kbc->cp_to_wkup_dly, kbc->mmio + KBC_TO_CNT_0);
+
+		tegra_kbc_set_fifo_interrupt(kbc, true);
+
+		if (kbc->keypress_caused_wake && kbc->wakeup_key) {
+			/*
+			 * We can't report events directly from the ISR
+			 * because timekeeping is stopped when processing
+			 * wakeup request and we get a nasty warning when
+			 * we try to call do_gettimeofday() in evdev
+			 * handler.
+			 */
+			input_report_key(kbc->idev, kbc->wakeup_key, 1);
+			input_sync(kbc->idev);
+			input_report_key(kbc->idev, kbc->wakeup_key, 0);
+			input_sync(kbc->idev);
+		}
+	} else {
+		if (kbc->idev->users)
+			err = tegra_kbc_start(kbc);
+	}
+	mutex_unlock(&kbc->idev->mutex);
+
+	return err;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tegra_kbc_pm_ops, tegra_kbc_suspend, tegra_kbc_resume);
+
+static struct platform_driver tegra_kbc_driver = {
+	.probe		= tegra_kbc_probe,
+	.driver	= {
+		.name	= "tegra-kbc",
+		.pm	= &tegra_kbc_pm_ops,
+		.of_match_table = tegra_kbc_of_match,
+	},
+};
+module_platform_driver(tegra_kbc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Rakesh Iyer <riyer@nvidia.com>");
+MODULE_DESCRIPTION("Tegra matrix keyboard controller driver");
+MODULE_ALIAS("platform:tegra-kbc");
diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c
new file mode 100644
index 000000000..fb078e049
--- /dev/null
+++ b/drivers/input/keyboard/tm2-touchkey.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TM2 touchkey device driver
+ *
+ * Copyright 2005 Phil Blundell
+ * Copyright 2016 Samsung Electronics Co., Ltd.
+ *
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ * Author: Jaechul Lee <jcsing.lee@samsung.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm.h>
+#include <linux/regulator/consumer.h>
+
+#define TM2_TOUCHKEY_DEV_NAME		"tm2-touchkey"
+
+#define ARIES_TOUCHKEY_CMD_LED_ON	0x1
+#define ARIES_TOUCHKEY_CMD_LED_OFF	0x2
+#define TM2_TOUCHKEY_CMD_LED_ON		0x10
+#define TM2_TOUCHKEY_CMD_LED_OFF	0x20
+#define TM2_TOUCHKEY_BIT_PRESS_EV	BIT(3)
+#define TM2_TOUCHKEY_BIT_KEYCODE	GENMASK(2, 0)
+#define TM2_TOUCHKEY_LED_VOLTAGE_MIN	2500000
+#define TM2_TOUCHKEY_LED_VOLTAGE_MAX	3300000
+
+struct touchkey_variant {
+	u8 keycode_reg;
+	u8 base_reg;
+	u8 cmd_led_on;
+	u8 cmd_led_off;
+	bool no_reg;
+	bool fixed_regulator;
+};
+
+struct tm2_touchkey_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct led_classdev led_dev;
+	struct regulator *vdd;
+	struct regulator_bulk_data regulators[2];
+	const struct touchkey_variant *variant;
+	u32 keycodes[4];
+	int num_keycodes;
+};
+
+static const struct touchkey_variant tm2_touchkey_variant = {
+	.keycode_reg = 0x03,
+	.base_reg = 0x00,
+	.cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
+};
+
+static const struct touchkey_variant midas_touchkey_variant = {
+	.keycode_reg = 0x00,
+	.base_reg = 0x00,
+	.cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
+};
+
+static struct touchkey_variant aries_touchkey_variant = {
+	.no_reg = true,
+	.fixed_regulator = true,
+	.cmd_led_on = ARIES_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = ARIES_TOUCHKEY_CMD_LED_OFF,
+};
+
+static const struct touchkey_variant tc360_touchkey_variant = {
+	.keycode_reg = 0x00,
+	.base_reg = 0x00,
+	.fixed_regulator = true,
+	.cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
+};
+
+static int tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
+					    enum led_brightness brightness)
+{
+	struct tm2_touchkey_data *touchkey =
+		container_of(led_dev, struct tm2_touchkey_data, led_dev);
+	u32 volt;
+	u8 data;
+
+	if (brightness == LED_OFF) {
+		volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
+		data = touchkey->variant->cmd_led_off;
+	} else {
+		volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
+		data = touchkey->variant->cmd_led_on;
+	}
+
+	if (!touchkey->variant->fixed_regulator)
+		regulator_set_voltage(touchkey->vdd, volt, volt);
+
+	return touchkey->variant->no_reg ?
+		i2c_smbus_write_byte(touchkey->client, data) :
+		i2c_smbus_write_byte_data(touchkey->client,
+					  touchkey->variant->base_reg, data);
+}
+
+static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
+{
+	int error;
+
+	error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators),
+				      touchkey->regulators);
+	if (error)
+		return error;
+
+	/* waiting for device initialization, at least 150ms */
+	msleep(150);
+
+	return 0;
+}
+
+static void tm2_touchkey_power_disable(void *data)
+{
+	struct tm2_touchkey_data *touchkey = data;
+
+	regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators),
+			       touchkey->regulators);
+}
+
+static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
+{
+	struct tm2_touchkey_data *touchkey = devid;
+	int data;
+	int index;
+	int i;
+
+	if (touchkey->variant->no_reg)
+		data = i2c_smbus_read_byte(touchkey->client);
+	else
+		data = i2c_smbus_read_byte_data(touchkey->client,
+						touchkey->variant->keycode_reg);
+	if (data < 0) {
+		dev_err(&touchkey->client->dev,
+			"failed to read i2c data: %d\n", data);
+		goto out;
+	}
+
+	index = (data & TM2_TOUCHKEY_BIT_KEYCODE) - 1;
+	if (index < 0 || index >= touchkey->num_keycodes) {
+		dev_warn(&touchkey->client->dev,
+			 "invalid keycode index %d\n", index);
+		goto out;
+	}
+
+	if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
+		for (i = 0; i < touchkey->num_keycodes; i++)
+			input_report_key(touchkey->input_dev,
+					 touchkey->keycodes[i], 0);
+	} else {
+		input_report_key(touchkey->input_dev,
+				 touchkey->keycodes[index], 1);
+	}
+
+	input_sync(touchkey->input_dev);
+
+out:
+	if (touchkey->variant->fixed_regulator &&
+				data & TM2_TOUCHKEY_BIT_PRESS_EV) {
+		/* touch turns backlight on, so make sure we're in sync */
+		if (touchkey->led_dev.brightness == LED_OFF)
+			tm2_touchkey_led_brightness_set(&touchkey->led_dev,
+							LED_OFF);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int tm2_touchkey_probe(struct i2c_client *client,
+			      const struct i2c_device_id *id)
+{
+	struct device_node *np = client->dev.of_node;
+	struct tm2_touchkey_data *touchkey;
+	int error;
+	int i;
+
+	if (!i2c_check_functionality(client->adapter,
+			I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "incompatible I2C adapter\n");
+		return -EIO;
+	}
+
+	touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL);
+	if (!touchkey)
+		return -ENOMEM;
+
+	touchkey->client = client;
+	i2c_set_clientdata(client, touchkey);
+
+	touchkey->variant = of_device_get_match_data(&client->dev);
+
+	touchkey->regulators[0].supply = "vcc";
+	touchkey->regulators[1].supply = "vdd";
+	error = devm_regulator_bulk_get(&client->dev,
+					ARRAY_SIZE(touchkey->regulators),
+					touchkey->regulators);
+	if (error) {
+		dev_err(&client->dev, "failed to get regulators: %d\n", error);
+		return error;
+	}
+
+	/* Save VDD for easy access */
+	touchkey->vdd = touchkey->regulators[1].consumer;
+
+	touchkey->num_keycodes = of_property_read_variable_u32_array(np,
+					"linux,keycodes", touchkey->keycodes, 0,
+					ARRAY_SIZE(touchkey->keycodes));
+	if (touchkey->num_keycodes <= 0) {
+		/* default keycodes */
+		touchkey->keycodes[0] = KEY_PHONE;
+		touchkey->keycodes[1] = KEY_BACK;
+		touchkey->num_keycodes = 2;
+	}
+
+	error = tm2_touchkey_power_enable(touchkey);
+	if (error) {
+		dev_err(&client->dev, "failed to power up device: %d\n", error);
+		return error;
+	}
+
+	error = devm_add_action_or_reset(&client->dev,
+					 tm2_touchkey_power_disable, touchkey);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to install poweroff handler: %d\n", error);
+		return error;
+	}
+
+	/* input device */
+	touchkey->input_dev = devm_input_allocate_device(&client->dev);
+	if (!touchkey->input_dev) {
+		dev_err(&client->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
+	touchkey->input_dev->id.bustype = BUS_I2C;
+
+	for (i = 0; i < touchkey->num_keycodes; i++)
+		input_set_capability(touchkey->input_dev, EV_KEY,
+				     touchkey->keycodes[i]);
+
+	error = input_register_device(touchkey->input_dev);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to register input device: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, tm2_touchkey_irq_handler,
+					  IRQF_ONESHOT,
+					  TM2_TOUCHKEY_DEV_NAME, touchkey);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to request threaded irq: %d\n", error);
+		return error;
+	}
+
+	/* led device */
+	touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
+	touchkey->led_dev.brightness = LED_ON;
+	touchkey->led_dev.max_brightness = LED_ON;
+	touchkey->led_dev.brightness_set_blocking =
+					tm2_touchkey_led_brightness_set;
+
+	error = devm_led_classdev_register(&client->dev, &touchkey->led_dev);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to register touchkey led: %d\n", error);
+		return error;
+	}
+
+	if (touchkey->variant->fixed_regulator)
+		tm2_touchkey_led_brightness_set(&touchkey->led_dev, LED_ON);
+
+	return 0;
+}
+
+static int __maybe_unused tm2_touchkey_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
+
+	disable_irq(client->irq);
+	tm2_touchkey_power_disable(touchkey);
+
+	return 0;
+}
+
+static int __maybe_unused tm2_touchkey_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
+	int ret;
+
+	enable_irq(client->irq);
+
+	ret = tm2_touchkey_power_enable(touchkey);
+	if (ret)
+		dev_err(dev, "failed to enable power: %d\n", ret);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops,
+			 tm2_touchkey_suspend, tm2_touchkey_resume);
+
+static const struct i2c_device_id tm2_touchkey_id_table[] = {
+	{ TM2_TOUCHKEY_DEV_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table);
+
+static const struct of_device_id tm2_touchkey_of_match[] = {
+	{
+		.compatible = "cypress,tm2-touchkey",
+		.data = &tm2_touchkey_variant,
+	}, {
+		.compatible = "cypress,midas-touchkey",
+		.data = &midas_touchkey_variant,
+	}, {
+		.compatible = "cypress,aries-touchkey",
+		.data = &aries_touchkey_variant,
+	}, {
+		.compatible = "coreriver,tc360-touchkey",
+		.data = &tc360_touchkey_variant,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match);
+
+static struct i2c_driver tm2_touchkey_driver = {
+	.driver = {
+		.name = TM2_TOUCHKEY_DEV_NAME,
+		.pm = &tm2_touchkey_pm_ops,
+		.of_match_table = of_match_ptr(tm2_touchkey_of_match),
+	},
+	.probe = tm2_touchkey_probe,
+	.id_table = tm2_touchkey_id_table,
+};
+module_i2c_driver(tm2_touchkey_driver);
+
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>");
+MODULE_DESCRIPTION("Samsung touchkey driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
new file mode 100644
index 000000000..77e0743a3
--- /dev/null
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * twl4030_keypad.c - driver for 8x8 keypad controller in twl4030 chips
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Code re-written for 2430SDP by:
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Initial Code:
+ * Manjunatha G K <manjugk@ti.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/twl.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+/*
+ * The TWL4030 family chips include a keypad controller that supports
+ * up to an 8x8 switch matrix.  The controller can issue system wakeup
+ * events, since it uses only the always-on 32KiHz oscillator, and has
+ * an internal state machine that decodes pressed keys, including
+ * multi-key combinations.
+ *
+ * This driver lets boards define what keycodes they wish to report for
+ * which scancodes, as part of the "struct twl4030_keypad_data" used in
+ * the probe() routine.
+ *
+ * See the TPS65950 documentation; that's the general availability
+ * version of the TWL5030 second generation part.
+ */
+#define TWL4030_MAX_ROWS	8	/* TWL4030 hard limit */
+#define TWL4030_MAX_COLS	8
+/*
+ * Note that we add space for an extra column so that we can handle
+ * row lines connected to the gnd (see twl4030_col_xlate()).
+ */
+#define TWL4030_ROW_SHIFT	4
+#define TWL4030_KEYMAP_SIZE	(TWL4030_MAX_ROWS << TWL4030_ROW_SHIFT)
+
+struct twl4030_keypad {
+	unsigned short	keymap[TWL4030_KEYMAP_SIZE];
+	u16		kp_state[TWL4030_MAX_ROWS];
+	bool		autorepeat;
+	unsigned int	n_rows;
+	unsigned int	n_cols;
+	int		irq;
+
+	struct device *dbg_dev;
+	struct input_dev *input;
+};
+
+/*----------------------------------------------------------------------*/
+
+/* arbitrary prescaler value 0..7 */
+#define PTV_PRESCALER			4
+
+/* Register Offsets */
+#define KEYP_CTRL			0x00
+#define KEYP_DEB			0x01
+#define KEYP_LONG_KEY			0x02
+#define KEYP_LK_PTV			0x03
+#define KEYP_TIMEOUT_L			0x04
+#define KEYP_TIMEOUT_H			0x05
+#define KEYP_KBC			0x06
+#define KEYP_KBR			0x07
+#define KEYP_SMS			0x08
+#define KEYP_FULL_CODE_7_0		0x09	/* row 0 column status */
+#define KEYP_FULL_CODE_15_8		0x0a	/* ... row 1 ... */
+#define KEYP_FULL_CODE_23_16		0x0b
+#define KEYP_FULL_CODE_31_24		0x0c
+#define KEYP_FULL_CODE_39_32		0x0d
+#define KEYP_FULL_CODE_47_40		0x0e
+#define KEYP_FULL_CODE_55_48		0x0f
+#define KEYP_FULL_CODE_63_56		0x10
+#define KEYP_ISR1			0x11
+#define KEYP_IMR1			0x12
+#define KEYP_ISR2			0x13
+#define KEYP_IMR2			0x14
+#define KEYP_SIR			0x15
+#define KEYP_EDR			0x16	/* edge triggers */
+#define KEYP_SIH_CTRL			0x17
+
+/* KEYP_CTRL_REG Fields */
+#define KEYP_CTRL_SOFT_NRST		BIT(0)
+#define KEYP_CTRL_SOFTMODEN		BIT(1)
+#define KEYP_CTRL_LK_EN			BIT(2)
+#define KEYP_CTRL_TOE_EN		BIT(3)
+#define KEYP_CTRL_TOLE_EN		BIT(4)
+#define KEYP_CTRL_RP_EN			BIT(5)
+#define KEYP_CTRL_KBD_ON		BIT(6)
+
+/* KEYP_DEB, KEYP_LONG_KEY, KEYP_TIMEOUT_x*/
+#define KEYP_PERIOD_US(t, prescale)	((t) / (31 << ((prescale) + 1)) - 1)
+
+/* KEYP_LK_PTV_REG Fields */
+#define KEYP_LK_PTV_PTV_SHIFT		5
+
+/* KEYP_{IMR,ISR,SIR} Fields */
+#define KEYP_IMR1_MIS			BIT(3)
+#define KEYP_IMR1_TO			BIT(2)
+#define KEYP_IMR1_LK			BIT(1)
+#define KEYP_IMR1_KP			BIT(0)
+
+/* KEYP_EDR Fields */
+#define KEYP_EDR_KP_FALLING		0x01
+#define KEYP_EDR_KP_RISING		0x02
+#define KEYP_EDR_KP_BOTH		0x03
+#define KEYP_EDR_LK_FALLING		0x04
+#define KEYP_EDR_LK_RISING		0x08
+#define KEYP_EDR_TO_FALLING		0x10
+#define KEYP_EDR_TO_RISING		0x20
+#define KEYP_EDR_MIS_FALLING		0x40
+#define KEYP_EDR_MIS_RISING		0x80
+
+
+/*----------------------------------------------------------------------*/
+
+static int twl4030_kpread(struct twl4030_keypad *kp,
+		u8 *data, u32 reg, u8 num_bytes)
+{
+	int ret = twl_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes);
+
+	if (ret < 0)
+		dev_warn(kp->dbg_dev,
+			"Couldn't read TWL4030: %X - ret %d[%x]\n",
+			 reg, ret, ret);
+
+	return ret;
+}
+
+static int twl4030_kpwrite_u8(struct twl4030_keypad *kp, u8 data, u32 reg)
+{
+	int ret = twl_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg);
+
+	if (ret < 0)
+		dev_warn(kp->dbg_dev,
+			"Could not write TWL4030: %X - ret %d[%x]\n",
+			 reg, ret, ret);
+
+	return ret;
+}
+
+static inline u16 twl4030_col_xlate(struct twl4030_keypad *kp, u8 col)
+{
+	/*
+	 * If all bits in a row are active for all columns then
+	 * we have that row line connected to gnd. Mark this
+	 * key on as if it was on matrix position n_cols (i.e.
+	 * one higher than the size of the matrix).
+	 */
+	if (col == 0xFF)
+		return 1 << kp->n_cols;
+	else
+		return col & ((1 << kp->n_cols) - 1);
+}
+
+static int twl4030_read_kp_matrix_state(struct twl4030_keypad *kp, u16 *state)
+{
+	u8 new_state[TWL4030_MAX_ROWS];
+	int row;
+	int ret = twl4030_kpread(kp, new_state,
+				 KEYP_FULL_CODE_7_0, kp->n_rows);
+	if (ret >= 0)
+		for (row = 0; row < kp->n_rows; row++)
+			state[row] = twl4030_col_xlate(kp, new_state[row]);
+
+	return ret;
+}
+
+static bool twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
+{
+	int i;
+	u16 check = 0;
+
+	for (i = 0; i < kp->n_rows; i++) {
+		u16 col = key_state[i];
+
+		if ((col & check) && hweight16(col) > 1)
+			return true;
+
+		check |= col;
+	}
+
+	return false;
+}
+
+static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all)
+{
+	struct input_dev *input = kp->input;
+	u16 new_state[TWL4030_MAX_ROWS];
+	int col, row;
+
+	if (release_all) {
+		memset(new_state, 0, sizeof(new_state));
+	} else {
+		/* check for any changes */
+		int ret = twl4030_read_kp_matrix_state(kp, new_state);
+
+		if (ret < 0)	/* panic ... */
+			return;
+
+		if (twl4030_is_in_ghost_state(kp, new_state))
+			return;
+	}
+
+	/* check for changes and print those */
+	for (row = 0; row < kp->n_rows; row++) {
+		int changed = new_state[row] ^ kp->kp_state[row];
+
+		if (!changed)
+			continue;
+
+		/* Extra column handles "all gnd" rows */
+		for (col = 0; col < kp->n_cols + 1; col++) {
+			int code;
+
+			if (!(changed & (1 << col)))
+				continue;
+
+			dev_dbg(kp->dbg_dev, "key [%d:%d] %s\n", row, col,
+				(new_state[row] & (1 << col)) ?
+				"press" : "release");
+
+			code = MATRIX_SCAN_CODE(row, col, TWL4030_ROW_SHIFT);
+			input_event(input, EV_MSC, MSC_SCAN, code);
+			input_report_key(input, kp->keymap[code],
+					 new_state[row] & (1 << col));
+		}
+		kp->kp_state[row] = new_state[row];
+	}
+	input_sync(input);
+}
+
+/*
+ * Keypad interrupt handler
+ */
+static irqreturn_t do_kp_irq(int irq, void *_kp)
+{
+	struct twl4030_keypad *kp = _kp;
+	u8 reg;
+	int ret;
+
+	/* Read & Clear TWL4030 pending interrupt */
+	ret = twl4030_kpread(kp, &reg, KEYP_ISR1, 1);
+
+	/*
+	 * Release all keys if I2C has gone bad or
+	 * the KEYP has gone to idle state.
+	 */
+	if (ret >= 0 && (reg & KEYP_IMR1_KP))
+		twl4030_kp_scan(kp, false);
+	else
+		twl4030_kp_scan(kp, true);
+
+	return IRQ_HANDLED;
+}
+
+static int twl4030_kp_program(struct twl4030_keypad *kp)
+{
+	u8 reg;
+	int i;
+
+	/* Enable controller, with hardware decoding but not autorepeat */
+	reg = KEYP_CTRL_SOFT_NRST | KEYP_CTRL_SOFTMODEN
+		| KEYP_CTRL_TOE_EN | KEYP_CTRL_KBD_ON;
+	if (twl4030_kpwrite_u8(kp, reg, KEYP_CTRL) < 0)
+		return -EIO;
+
+	/*
+	 * NOTE: we could use sih_setup() here to package keypad
+	 * event sources as four different IRQs ... but we don't.
+	 */
+
+	/* Enable TO rising and KP rising and falling edge detection */
+	reg = KEYP_EDR_KP_BOTH | KEYP_EDR_TO_RISING;
+	if (twl4030_kpwrite_u8(kp, reg, KEYP_EDR) < 0)
+		return -EIO;
+
+	/* Set PTV prescaler Field */
+	reg = (PTV_PRESCALER << KEYP_LK_PTV_PTV_SHIFT);
+	if (twl4030_kpwrite_u8(kp, reg, KEYP_LK_PTV) < 0)
+		return -EIO;
+
+	/* Set key debounce time to 20 ms */
+	i = KEYP_PERIOD_US(20000, PTV_PRESCALER);
+	if (twl4030_kpwrite_u8(kp, i, KEYP_DEB) < 0)
+		return -EIO;
+
+	/* Set timeout period to 200 ms */
+	i = KEYP_PERIOD_US(200000, PTV_PRESCALER);
+	if (twl4030_kpwrite_u8(kp, (i & 0xFF), KEYP_TIMEOUT_L) < 0)
+		return -EIO;
+
+	if (twl4030_kpwrite_u8(kp, (i >> 8), KEYP_TIMEOUT_H) < 0)
+		return -EIO;
+
+	/*
+	 * Enable Clear-on-Read; disable remembering events that fire
+	 * after the IRQ but before our handler acks (reads) them.
+	 */
+	reg = TWL4030_SIH_CTRL_COR_MASK | TWL4030_SIH_CTRL_PENDDIS_MASK;
+	if (twl4030_kpwrite_u8(kp, reg, KEYP_SIH_CTRL) < 0)
+		return -EIO;
+
+	/* initialize key state; irqs update it from here on */
+	if (twl4030_read_kp_matrix_state(kp, kp->kp_state) < 0)
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * Registers keypad device with input subsystem
+ * and configures TWL4030 keypad registers
+ */
+static int twl4030_kp_probe(struct platform_device *pdev)
+{
+	struct twl4030_keypad_data *pdata = dev_get_platdata(&pdev->dev);
+	const struct matrix_keymap_data *keymap_data = NULL;
+	struct twl4030_keypad *kp;
+	struct input_dev *input;
+	u8 reg;
+	int error;
+
+	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+	if (!kp)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	/* get the debug device */
+	kp->dbg_dev		= &pdev->dev;
+	kp->input		= input;
+
+	/* setup input device */
+	input->name		= "TWL4030 Keypad";
+	input->phys		= "twl4030_keypad/input0";
+
+	input->id.bustype	= BUS_HOST;
+	input->id.vendor	= 0x0001;
+	input->id.product	= 0x0001;
+	input->id.version	= 0x0003;
+
+	if (pdata) {
+		if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
+			dev_err(&pdev->dev, "Missing platform_data\n");
+			return -EINVAL;
+		}
+
+		kp->n_rows = pdata->rows;
+		kp->n_cols = pdata->cols;
+		kp->autorepeat = pdata->rep;
+		keymap_data = pdata->keymap_data;
+	} else {
+		error = matrix_keypad_parse_properties(&pdev->dev, &kp->n_rows,
+						       &kp->n_cols);
+		if (error)
+			return error;
+
+		kp->autorepeat = true;
+	}
+
+	if (kp->n_rows > TWL4030_MAX_ROWS || kp->n_cols > TWL4030_MAX_COLS) {
+		dev_err(&pdev->dev,
+			"Invalid rows/cols amount specified in platform/devicetree data\n");
+		return -EINVAL;
+	}
+
+	kp->irq = platform_get_irq(pdev, 0);
+	if (kp->irq < 0)
+		return kp->irq;
+
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   TWL4030_MAX_ROWS,
+					   1 << TWL4030_ROW_SHIFT,
+					   kp->keymap, input);
+	if (error) {
+		dev_err(kp->dbg_dev, "Failed to build keymap\n");
+		return error;
+	}
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (kp->autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(kp->dbg_dev,
+			"Unable to register twl4030 keypad device\n");
+		return error;
+	}
+
+	error = twl4030_kp_program(kp);
+	if (error)
+		return error;
+
+	/*
+	 * This ISR will always execute in kernel thread context because of
+	 * the need to access the TWL4030 over the I2C bus.
+	 *
+	 * NOTE:  we assume this host is wired to TWL4040 INT1, not INT2 ...
+	 */
+	error = devm_request_threaded_irq(&pdev->dev, kp->irq, NULL, do_kp_irq,
+					  0, pdev->name, kp);
+	if (error) {
+		dev_info(kp->dbg_dev, "request_irq failed for irq no=%d: %d\n",
+			kp->irq, error);
+		return error;
+	}
+
+	/* Enable KP and TO interrupts now. */
+	reg = (u8) ~(KEYP_IMR1_KP | KEYP_IMR1_TO);
+	if (twl4030_kpwrite_u8(kp, reg, KEYP_IMR1)) {
+		/* mask all events - we don't care about the result */
+		(void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl4030_keypad_dt_match_table[] = {
+	{ .compatible = "ti,twl4030-keypad" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, twl4030_keypad_dt_match_table);
+#endif
+
+/*
+ * NOTE: twl4030 are multi-function devices connected via I2C.
+ * So this device is a child of an I2C parent, thus it needs to
+ * support unplug/replug (which most platform devices don't).
+ */
+
+static struct platform_driver twl4030_kp_driver = {
+	.probe		= twl4030_kp_probe,
+	.driver		= {
+		.name	= "twl4030_keypad",
+		.of_match_table = of_match_ptr(twl4030_keypad_dt_match_table),
+	},
+};
+module_platform_driver(twl4030_kp_driver);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("TWL4030 Keypad Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:twl4030_keypad");
diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c
new file mode 100644
index 000000000..280796df6
--- /dev/null
+++ b/drivers/input/keyboard/xtkbd.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ * XT keyboard driver for Linux
+ */
+
+/*
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"XT keyboard driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define XTKBD_EMUL0	0xe0
+#define XTKBD_EMUL1	0xe1
+#define XTKBD_KEY	0x7f
+#define XTKBD_RELEASE	0x80
+
+static unsigned char xtkbd_keycode[256] = {
+	  0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
+	 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+	 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+	 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+	 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
+	 80, 81, 82, 83,  0,  0,  0, 87, 88,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0, 87, 88,  0,  0,  0,  0,110,111,103,108,105,
+	106
+};
+
+struct xtkbd {
+	unsigned char keycode[256];
+	struct input_dev *dev;
+	struct serio *serio;
+	char phys[32];
+};
+
+static irqreturn_t xtkbd_interrupt(struct serio *serio,
+	unsigned char data, unsigned int flags)
+{
+	struct xtkbd *xtkbd = serio_get_drvdata(serio);
+
+	switch (data) {
+		case XTKBD_EMUL0:
+		case XTKBD_EMUL1:
+			break;
+		default:
+
+			if (xtkbd->keycode[data & XTKBD_KEY]) {
+				input_report_key(xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE));
+				input_sync(xtkbd->dev);
+			} else {
+				printk(KERN_WARNING "xtkbd.c: Unknown key (scancode %#x) %s.\n",
+					data & XTKBD_KEY, data & XTKBD_RELEASE ? "released" : "pressed");
+			}
+	}
+	return IRQ_HANDLED;
+}
+
+static int xtkbd_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct xtkbd *xtkbd;
+	struct input_dev *input_dev;
+	int err = -ENOMEM;
+	int i;
+
+	xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!xtkbd || !input_dev)
+		goto fail1;
+
+	xtkbd->serio = serio;
+	xtkbd->dev = input_dev;
+	snprintf(xtkbd->phys, sizeof(xtkbd->phys), "%s/input0", serio->phys);
+	memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode));
+
+	input_dev->name = "XT Keyboard";
+	input_dev->phys = xtkbd->phys;
+	input_dev->id.bustype = BUS_XTKBD;
+	input_dev->id.vendor  = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->keycode = xtkbd->keycode;
+	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodemax = ARRAY_SIZE(xtkbd_keycode);
+
+	for (i = 0; i < 255; i++)
+		set_bit(xtkbd->keycode[i], input_dev->keybit);
+	clear_bit(0, input_dev->keybit);
+
+	serio_set_drvdata(serio, xtkbd);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(xtkbd->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(xtkbd);
+	return err;
+}
+
+static void xtkbd_disconnect(struct serio *serio)
+{
+	struct xtkbd *xtkbd = serio_get_drvdata(serio);
+
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_unregister_device(xtkbd->dev);
+	kfree(xtkbd);
+}
+
+static const struct serio_device_id xtkbd_serio_ids[] = {
+	{
+		.type	= SERIO_XT,
+		.proto	= SERIO_ANY,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, xtkbd_serio_ids);
+
+static struct serio_driver xtkbd_drv = {
+	.driver		= {
+		.name	= "xtkbd",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= xtkbd_serio_ids,
+	.interrupt	= xtkbd_interrupt,
+	.connect	= xtkbd_connect,
+	.disconnect	= xtkbd_disconnect,
+};
+
+module_serio_driver(xtkbd_drv);