Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 346 insertions, 0 deletions

diff --git a/drivers/media/platform/exynos4-is/fimc-lite-reg.c b/drivers/media/platform/exynos4-is/fimc-lite-reg.c
new file mode 100644
index 000000000..85f765e0f
--- /dev/null
+++ b/drivers/media/platform/exynos4-is/fimc-lite-reg.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Register interface file for EXYNOS FIMC-LITE (camera interface) driver
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+*/
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <media/drv-intf/exynos-fimc.h>
+
+#include "fimc-lite-reg.h"
+#include "fimc-lite.h"
+#include "fimc-core.h"
+
+#define FLITE_RESET_TIMEOUT 50 /* in ms */
+
+void flite_hw_reset(struct fimc_lite *dev)
+{
+	unsigned long end = jiffies + msecs_to_jiffies(FLITE_RESET_TIMEOUT);
+	u32 cfg;
+
+	cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	cfg |= FLITE_REG_CIGCTRL_SWRST_REQ;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	while (time_is_after_jiffies(end)) {
+		cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+		if (cfg & FLITE_REG_CIGCTRL_SWRST_RDY)
+			break;
+		usleep_range(1000, 5000);
+	}
+
+	cfg |= FLITE_REG_CIGCTRL_SWRST;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+void flite_hw_clear_pending_irq(struct fimc_lite *dev)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS);
+	cfg &= ~FLITE_REG_CISTATUS_IRQ_CAM;
+	writel(cfg, dev->regs + FLITE_REG_CISTATUS);
+}
+
+u32 flite_hw_get_interrupt_source(struct fimc_lite *dev)
+{
+	u32 intsrc = readl(dev->regs + FLITE_REG_CISTATUS);
+	return intsrc & FLITE_REG_CISTATUS_IRQ_MASK;
+}
+
+void flite_hw_clear_last_capture_end(struct fimc_lite *dev)
+{
+
+	u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS2);
+	cfg &= ~FLITE_REG_CISTATUS2_LASTCAPEND;
+	writel(cfg, dev->regs + FLITE_REG_CISTATUS2);
+}
+
+void flite_hw_set_interrupt_mask(struct fimc_lite *dev)
+{
+	u32 cfg, intsrc;
+
+	/* Select interrupts to be enabled for each output mode */
+	if (atomic_read(&dev->out_path) == FIMC_IO_DMA) {
+		intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
+			 FLITE_REG_CIGCTRL_IRQ_LASTEN |
+			 FLITE_REG_CIGCTRL_IRQ_STARTEN |
+			 FLITE_REG_CIGCTRL_IRQ_ENDEN;
+	} else {
+		/* An output to the FIMC-IS */
+		intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
+			 FLITE_REG_CIGCTRL_IRQ_LASTEN;
+	}
+
+	cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	cfg |= FLITE_REG_CIGCTRL_IRQ_DISABLE_MASK;
+	cfg &= ~intsrc;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+void flite_hw_capture_start(struct fimc_lite *dev)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT);
+	cfg |= FLITE_REG_CIIMGCPT_IMGCPTEN;
+	writel(cfg, dev->regs + FLITE_REG_CIIMGCPT);
+}
+
+void flite_hw_capture_stop(struct fimc_lite *dev)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT);
+	cfg &= ~FLITE_REG_CIIMGCPT_IMGCPTEN;
+	writel(cfg, dev->regs + FLITE_REG_CIIMGCPT);
+}
+
+/*
+ * Test pattern (color bars) enable/disable. External sensor
+ * pixel clock must be active for the test pattern to work.
+ */
+void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	if (on)
+		cfg |= FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR;
+	else
+		cfg &= ~FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+static const u32 src_pixfmt_map[8][3] = {
+	{ MEDIA_BUS_FMT_YUYV8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCBYCR,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ MEDIA_BUS_FMT_YVYU8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCRYCB,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ MEDIA_BUS_FMT_UYVY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CBYCRY,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ MEDIA_BUS_FMT_VYUY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ MEDIA_BUS_FMT_SGRBG8_1X8, 0, FLITE_REG_CIGCTRL_RAW8 },
+	{ MEDIA_BUS_FMT_SGRBG10_1X10, 0, FLITE_REG_CIGCTRL_RAW10 },
+	{ MEDIA_BUS_FMT_SGRBG12_1X12, 0, FLITE_REG_CIGCTRL_RAW12 },
+	{ MEDIA_BUS_FMT_JPEG_1X8, 0, FLITE_REG_CIGCTRL_USER(1) },
+};
+
+/* Set camera input pixel format and resolution */
+void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f)
+{
+	u32 pixelcode = f->fmt->mbus_code;
+	int i = ARRAY_SIZE(src_pixfmt_map);
+	u32 cfg;
+
+	while (--i) {
+		if (src_pixfmt_map[i][0] == pixelcode)
+			break;
+	}
+
+	if (i == 0 && src_pixfmt_map[i][0] != pixelcode) {
+		v4l2_err(&dev->ve.vdev,
+			 "Unsupported pixel code, falling back to %#08x\n",
+			 src_pixfmt_map[i][0]);
+	}
+
+	cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	cfg &= ~FLITE_REG_CIGCTRL_FMT_MASK;
+	cfg |= src_pixfmt_map[i][2];
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	cfg = readl(dev->regs + FLITE_REG_CISRCSIZE);
+	cfg &= ~(FLITE_REG_CISRCSIZE_ORDER422_MASK |
+		 FLITE_REG_CISRCSIZE_SIZE_CAM_MASK);
+	cfg |= (f->f_width << 16) | f->f_height;
+	cfg |= src_pixfmt_map[i][1];
+	writel(cfg, dev->regs + FLITE_REG_CISRCSIZE);
+}
+
+/* Set the camera host input window offsets (cropping) */
+void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f)
+{
+	u32 hoff2, voff2;
+	u32 cfg;
+
+	cfg = readl(dev->regs + FLITE_REG_CIWDOFST);
+	cfg &= ~FLITE_REG_CIWDOFST_OFST_MASK;
+	cfg |= (f->rect.left << 16) | f->rect.top;
+	cfg |= FLITE_REG_CIWDOFST_WINOFSEN;
+	writel(cfg, dev->regs + FLITE_REG_CIWDOFST);
+
+	hoff2 = f->f_width - f->rect.width - f->rect.left;
+	voff2 = f->f_height - f->rect.height - f->rect.top;
+
+	cfg = (hoff2 << 16) | voff2;
+	writel(cfg, dev->regs + FLITE_REG_CIWDOFST2);
+}
+
+/* Select camera port (A, B) */
+static void flite_hw_set_camera_port(struct fimc_lite *dev, int id)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGENERAL);
+	if (id == 0)
+		cfg &= ~FLITE_REG_CIGENERAL_CAM_B;
+	else
+		cfg |= FLITE_REG_CIGENERAL_CAM_B;
+	writel(cfg, dev->regs + FLITE_REG_CIGENERAL);
+}
+
+/* Select serial or parallel bus, camera port (A,B) and set signals polarity */
+void flite_hw_set_camera_bus(struct fimc_lite *dev,
+			     struct fimc_source_info *si)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	unsigned int flags = si->flags;
+
+	if (si->sensor_bus_type != FIMC_BUS_TYPE_MIPI_CSI2) {
+		cfg &= ~(FLITE_REG_CIGCTRL_SELCAM_MIPI |
+			 FLITE_REG_CIGCTRL_INVPOLPCLK |
+			 FLITE_REG_CIGCTRL_INVPOLVSYNC |
+			 FLITE_REG_CIGCTRL_INVPOLHREF);
+
+		if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
+			cfg |= FLITE_REG_CIGCTRL_INVPOLPCLK;
+
+		if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+			cfg |= FLITE_REG_CIGCTRL_INVPOLVSYNC;
+
+		if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+			cfg |= FLITE_REG_CIGCTRL_INVPOLHREF;
+	} else {
+		cfg |= FLITE_REG_CIGCTRL_SELCAM_MIPI;
+	}
+
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	flite_hw_set_camera_port(dev, si->mux_id);
+}
+
+static void flite_hw_set_pack12(struct fimc_lite *dev, int on)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
+
+	cfg &= ~FLITE_REG_CIODMAFMT_PACK12;
+
+	if (on)
+		cfg |= FLITE_REG_CIODMAFMT_PACK12;
+
+	writel(cfg, dev->regs + FLITE_REG_CIODMAFMT);
+}
+
+static void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f)
+{
+	static const u32 pixcode[4][2] = {
+		{ MEDIA_BUS_FMT_YUYV8_2X8, FLITE_REG_CIODMAFMT_YCBYCR },
+		{ MEDIA_BUS_FMT_YVYU8_2X8, FLITE_REG_CIODMAFMT_YCRYCB },
+		{ MEDIA_BUS_FMT_UYVY8_2X8, FLITE_REG_CIODMAFMT_CBYCRY },
+		{ MEDIA_BUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY },
+	};
+	u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
+	int i = ARRAY_SIZE(pixcode);
+
+	while (--i)
+		if (pixcode[i][0] == f->fmt->mbus_code)
+			break;
+	cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK;
+	writel(cfg | pixcode[i][1], dev->regs + FLITE_REG_CIODMAFMT);
+}
+
+void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f)
+{
+	u32 cfg;
+
+	/* Maximum output pixel size */
+	cfg = readl(dev->regs + FLITE_REG_CIOCAN);
+	cfg &= ~FLITE_REG_CIOCAN_MASK;
+	cfg |= (f->f_height << 16) | f->f_width;
+	writel(cfg, dev->regs + FLITE_REG_CIOCAN);
+
+	/* DMA offsets */
+	cfg = readl(dev->regs + FLITE_REG_CIOOFF);
+	cfg &= ~FLITE_REG_CIOOFF_MASK;
+	cfg |= (f->rect.top << 16) | f->rect.left;
+	writel(cfg, dev->regs + FLITE_REG_CIOOFF);
+}
+
+void flite_hw_set_dma_buffer(struct fimc_lite *dev, struct flite_buffer *buf)
+{
+	unsigned int index;
+	u32 cfg;
+
+	if (dev->dd->max_dma_bufs == 1)
+		index = 0;
+	else
+		index = buf->index;
+
+	if (index == 0)
+		writel(buf->paddr, dev->regs + FLITE_REG_CIOSA);
+	else
+		writel(buf->paddr, dev->regs + FLITE_REG_CIOSAN(index - 1));
+
+	cfg = readl(dev->regs + FLITE_REG_CIFCNTSEQ);
+	cfg |= BIT(index);
+	writel(cfg, dev->regs + FLITE_REG_CIFCNTSEQ);
+}
+
+void flite_hw_mask_dma_buffer(struct fimc_lite *dev, u32 index)
+{
+	u32 cfg;
+
+	if (dev->dd->max_dma_bufs == 1)
+		index = 0;
+
+	cfg = readl(dev->regs + FLITE_REG_CIFCNTSEQ);
+	cfg &= ~BIT(index);
+	writel(cfg, dev->regs + FLITE_REG_CIFCNTSEQ);
+}
+
+/* Enable/disable output DMA, set output pixel size and offsets (composition) */
+void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f,
+			     bool enable)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+
+	if (!enable) {
+		cfg |= FLITE_REG_CIGCTRL_ODMA_DISABLE;
+		writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+		return;
+	}
+
+	cfg &= ~FLITE_REG_CIGCTRL_ODMA_DISABLE;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	flite_hw_set_out_order(dev, f);
+	flite_hw_set_dma_window(dev, f);
+	flite_hw_set_pack12(dev, 0);
+}
+
+void flite_hw_dump_regs(struct fimc_lite *dev, const char *label)
+{
+	struct {
+		u32 offset;
+		const char * const name;
+	} registers[] = {
+		{ 0x00, "CISRCSIZE" },
+		{ 0x04, "CIGCTRL" },
+		{ 0x08, "CIIMGCPT" },
+		{ 0x0c, "CICPTSEQ" },
+		{ 0x10, "CIWDOFST" },
+		{ 0x14, "CIWDOFST2" },
+		{ 0x18, "CIODMAFMT" },
+		{ 0x20, "CIOCAN" },
+		{ 0x24, "CIOOFF" },
+		{ 0x30, "CIOSA" },
+		{ 0x40, "CISTATUS" },
+		{ 0x44, "CISTATUS2" },
+		{ 0xf0, "CITHOLD" },
+		{ 0xfc, "CIGENERAL" },
+	};
+	u32 i;
+
+	v4l2_info(&dev->subdev, "--- %s ---\n", label);
+
+	for (i = 0; i < ARRAY_SIZE(registers); i++) {
+		u32 cfg = readl(dev->regs + registers[i].offset);
+		v4l2_info(&dev->subdev, "%9s: 0x%08x\n",
+			  registers[i].name, cfg);
+	}
+}