Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2179 insertions, 0 deletions

diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
new file mode 100644
index 000000000..03dfe96bc
--- /dev/null
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -0,0 +1,2179 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *      uvc_video.c  --  USB Video Class driver - Video handling
+ *
+ *      Copyright (C) 2005-2010
+ *          Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <linux/atomic.h>
+#include <asm/unaligned.h>
+
+#include <media/v4l2-common.h>
+
+#include "uvcvideo.h"
+
+/* ------------------------------------------------------------------------
+ * UVC Controls
+ */
+
+static int __uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit,
+			u8 intfnum, u8 cs, void *data, u16 size,
+			int timeout)
+{
+	u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+	unsigned int pipe;
+
+	pipe = (query & 0x80) ? usb_rcvctrlpipe(dev->udev, 0)
+			      : usb_sndctrlpipe(dev->udev, 0);
+	type |= (query & 0x80) ? USB_DIR_IN : USB_DIR_OUT;
+
+	return usb_control_msg(dev->udev, pipe, query, type, cs << 8,
+			unit << 8 | intfnum, data, size, timeout);
+}
+
+static const char *uvc_query_name(u8 query)
+{
+	switch (query) {
+	case UVC_SET_CUR:
+		return "SET_CUR";
+	case UVC_GET_CUR:
+		return "GET_CUR";
+	case UVC_GET_MIN:
+		return "GET_MIN";
+	case UVC_GET_MAX:
+		return "GET_MAX";
+	case UVC_GET_RES:
+		return "GET_RES";
+	case UVC_GET_LEN:
+		return "GET_LEN";
+	case UVC_GET_INFO:
+		return "GET_INFO";
+	case UVC_GET_DEF:
+		return "GET_DEF";
+	default:
+		return "<invalid>";
+	}
+}
+
+int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit,
+			u8 intfnum, u8 cs, void *data, u16 size)
+{
+	int ret;
+	u8 error;
+	u8 tmp;
+
+	ret = __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size,
+				UVC_CTRL_CONTROL_TIMEOUT);
+	if (likely(ret == size))
+		return 0;
+
+	uvc_printk(KERN_ERR,
+		   "Failed to query (%s) UVC control %u on unit %u: %d (exp. %u).\n",
+		   uvc_query_name(query), cs, unit, ret, size);
+
+	if (ret != -EPIPE)
+		return ret;
+
+	tmp = *(u8 *)data;
+
+	ret = __uvc_query_ctrl(dev, UVC_GET_CUR, 0, intfnum,
+			       UVC_VC_REQUEST_ERROR_CODE_CONTROL, data, 1,
+			       UVC_CTRL_CONTROL_TIMEOUT);
+
+	error = *(u8 *)data;
+	*(u8 *)data = tmp;
+
+	if (ret != 1)
+		return ret < 0 ? ret : -EPIPE;
+
+	uvc_trace(UVC_TRACE_CONTROL, "Control error %u\n", error);
+
+	switch (error) {
+	case 0:
+		/* Cannot happen - we received a STALL */
+		return -EPIPE;
+	case 1: /* Not ready */
+		return -EBUSY;
+	case 2: /* Wrong state */
+		return -EILSEQ;
+	case 3: /* Power */
+		return -EREMOTE;
+	case 4: /* Out of range */
+		return -ERANGE;
+	case 5: /* Invalid unit */
+	case 6: /* Invalid control */
+	case 7: /* Invalid Request */
+		/*
+		 * The firmware has not properly implemented
+		 * the control or there has been a HW error.
+		 */
+		return -EIO;
+	case 8: /* Invalid value within range */
+		return -EINVAL;
+	default: /* reserved or unknown */
+		break;
+	}
+
+	return -EPIPE;
+}
+
+static void uvc_fixup_video_ctrl(struct uvc_streaming *stream,
+	struct uvc_streaming_control *ctrl)
+{
+	static const struct usb_device_id elgato_cam_link_4k = {
+		USB_DEVICE(0x0fd9, 0x0066)
+	};
+	struct uvc_format *format = NULL;
+	struct uvc_frame *frame = NULL;
+	unsigned int i;
+
+	/*
+	 * The response of the Elgato Cam Link 4K is incorrect: The second byte
+	 * contains bFormatIndex (instead of being the second byte of bmHint).
+	 * The first byte is always zero. The third byte is always 1.
+	 *
+	 * The UVC 1.5 class specification defines the first five bits in the
+	 * bmHint bitfield. The remaining bits are reserved and should be zero.
+	 * Therefore a valid bmHint will be less than 32.
+	 *
+	 * Latest Elgato Cam Link 4K firmware as of 2021-03-23 needs this fix.
+	 * MCU: 20.02.19, FPGA: 67
+	 */
+	if (usb_match_one_id(stream->dev->intf, &elgato_cam_link_4k) &&
+	    ctrl->bmHint > 255) {
+		u8 corrected_format_index = ctrl->bmHint >> 8;
+
+		/* uvc_dbg(stream->dev, VIDEO,
+			"Correct USB video probe response from {bmHint: 0x%04x, bFormatIndex: %u} to {bmHint: 0x%04x, bFormatIndex: %u}\n",
+			ctrl->bmHint, ctrl->bFormatIndex,
+			1, corrected_format_index); */
+		ctrl->bmHint = 1;
+		ctrl->bFormatIndex = corrected_format_index;
+	}
+
+	for (i = 0; i < stream->nformats; ++i) {
+		if (stream->format[i].index == ctrl->bFormatIndex) {
+			format = &stream->format[i];
+			break;
+		}
+	}
+
+	if (format == NULL)
+		return;
+
+	for (i = 0; i < format->nframes; ++i) {
+		if (format->frame[i].bFrameIndex == ctrl->bFrameIndex) {
+			frame = &format->frame[i];
+			break;
+		}
+	}
+
+	if (frame == NULL)
+		return;
+
+	if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) ||
+	     (ctrl->dwMaxVideoFrameSize == 0 &&
+	      stream->dev->uvc_version < 0x0110))
+		ctrl->dwMaxVideoFrameSize =
+			frame->dwMaxVideoFrameBufferSize;
+
+	/* The "TOSHIBA Web Camera - 5M" Chicony device (04f2:b50b) seems to
+	 * compute the bandwidth on 16 bits and erroneously sign-extend it to
+	 * 32 bits, resulting in a huge bandwidth value. Detect and fix that
+	 * condition by setting the 16 MSBs to 0 when they're all equal to 1.
+	 */
+	if ((ctrl->dwMaxPayloadTransferSize & 0xffff0000) == 0xffff0000)
+		ctrl->dwMaxPayloadTransferSize &= ~0xffff0000;
+
+	if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) &&
+	    stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH &&
+	    stream->intf->num_altsetting > 1) {
+		u32 interval;
+		u32 bandwidth;
+
+		interval = (ctrl->dwFrameInterval > 100000)
+			 ? ctrl->dwFrameInterval
+			 : frame->dwFrameInterval[0];
+
+		/* Compute a bandwidth estimation by multiplying the frame
+		 * size by the number of video frames per second, divide the
+		 * result by the number of USB frames (or micro-frames for
+		 * high-speed devices) per second and add the UVC header size
+		 * (assumed to be 12 bytes long).
+		 */
+		bandwidth = frame->wWidth * frame->wHeight / 8 * format->bpp;
+		bandwidth *= 10000000 / interval + 1;
+		bandwidth /= 1000;
+		if (stream->dev->udev->speed == USB_SPEED_HIGH)
+			bandwidth /= 8;
+		bandwidth += 12;
+
+		/* The bandwidth estimate is too low for many cameras. Don't use
+		 * maximum packet sizes lower than 1024 bytes to try and work
+		 * around the problem. According to measurements done on two
+		 * different camera models, the value is high enough to get most
+		 * resolutions working while not preventing two simultaneous
+		 * VGA streams at 15 fps.
+		 */
+		bandwidth = max_t(u32, bandwidth, 1024);
+
+		ctrl->dwMaxPayloadTransferSize = bandwidth;
+	}
+}
+
+static size_t uvc_video_ctrl_size(struct uvc_streaming *stream)
+{
+	/*
+	 * Return the size of the video probe and commit controls, which depends
+	 * on the protocol version.
+	 */
+	if (stream->dev->uvc_version < 0x0110)
+		return 26;
+	else if (stream->dev->uvc_version < 0x0150)
+		return 34;
+	else
+		return 48;
+}
+
+static int uvc_get_video_ctrl(struct uvc_streaming *stream,
+	struct uvc_streaming_control *ctrl, int probe, u8 query)
+{
+	u16 size = uvc_video_ctrl_size(stream);
+	u8 *data;
+	int ret;
+
+	if ((stream->dev->quirks & UVC_QUIRK_PROBE_DEF) &&
+			query == UVC_GET_DEF)
+		return -EIO;
+
+	data = kmalloc(size, GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	ret = __uvc_query_ctrl(stream->dev, query, 0, stream->intfnum,
+		probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data,
+		size, uvc_timeout_param);
+
+	if ((query == UVC_GET_MIN || query == UVC_GET_MAX) && ret == 2) {
+		/* Some cameras, mostly based on Bison Electronics chipsets,
+		 * answer a GET_MIN or GET_MAX request with the wCompQuality
+		 * field only.
+		 */
+		uvc_warn_once(stream->dev, UVC_WARN_MINMAX, "UVC non "
+			"compliance - GET_MIN/MAX(PROBE) incorrectly "
+			"supported. Enabling workaround.\n");
+		memset(ctrl, 0, sizeof(*ctrl));
+		ctrl->wCompQuality = le16_to_cpup((__le16 *)data);
+		ret = 0;
+		goto out;
+	} else if (query == UVC_GET_DEF && probe == 1 && ret != size) {
+		/* Many cameras don't support the GET_DEF request on their
+		 * video probe control. Warn once and return, the caller will
+		 * fall back to GET_CUR.
+		 */
+		uvc_warn_once(stream->dev, UVC_WARN_PROBE_DEF, "UVC non "
+			"compliance - GET_DEF(PROBE) not supported. "
+			"Enabling workaround.\n");
+		ret = -EIO;
+		goto out;
+	} else if (ret != size) {
+		uvc_printk(KERN_ERR, "Failed to query (%u) UVC %s control : "
+			"%d (exp. %u).\n", query, probe ? "probe" : "commit",
+			ret, size);
+		ret = -EIO;
+		goto out;
+	}
+
+	ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]);
+	ctrl->bFormatIndex = data[2];
+	ctrl->bFrameIndex = data[3];
+	ctrl->dwFrameInterval = le32_to_cpup((__le32 *)&data[4]);
+	ctrl->wKeyFrameRate = le16_to_cpup((__le16 *)&data[8]);
+	ctrl->wPFrameRate = le16_to_cpup((__le16 *)&data[10]);
+	ctrl->wCompQuality = le16_to_cpup((__le16 *)&data[12]);
+	ctrl->wCompWindowSize = le16_to_cpup((__le16 *)&data[14]);
+	ctrl->wDelay = le16_to_cpup((__le16 *)&data[16]);
+	ctrl->dwMaxVideoFrameSize = get_unaligned_le32(&data[18]);
+	ctrl->dwMaxPayloadTransferSize = get_unaligned_le32(&data[22]);
+
+	if (size >= 34) {
+		ctrl->dwClockFrequency = get_unaligned_le32(&data[26]);
+		ctrl->bmFramingInfo = data[30];
+		ctrl->bPreferedVersion = data[31];
+		ctrl->bMinVersion = data[32];
+		ctrl->bMaxVersion = data[33];
+	} else {
+		ctrl->dwClockFrequency = stream->dev->clock_frequency;
+		ctrl->bmFramingInfo = 0;
+		ctrl->bPreferedVersion = 0;
+		ctrl->bMinVersion = 0;
+		ctrl->bMaxVersion = 0;
+	}
+
+	/* Some broken devices return null or wrong dwMaxVideoFrameSize and
+	 * dwMaxPayloadTransferSize fields. Try to get the value from the
+	 * format and frame descriptors.
+	 */
+	uvc_fixup_video_ctrl(stream, ctrl);
+	ret = 0;
+
+out:
+	kfree(data);
+	return ret;
+}
+
+static int uvc_set_video_ctrl(struct uvc_streaming *stream,
+	struct uvc_streaming_control *ctrl, int probe)
+{
+	u16 size = uvc_video_ctrl_size(stream);
+	u8 *data;
+	int ret;
+
+	data = kzalloc(size, GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	*(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint);
+	data[2] = ctrl->bFormatIndex;
+	data[3] = ctrl->bFrameIndex;
+	*(__le32 *)&data[4] = cpu_to_le32(ctrl->dwFrameInterval);
+	*(__le16 *)&data[8] = cpu_to_le16(ctrl->wKeyFrameRate);
+	*(__le16 *)&data[10] = cpu_to_le16(ctrl->wPFrameRate);
+	*(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality);
+	*(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize);
+	*(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay);
+	put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]);
+	put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]);
+
+	if (size >= 34) {
+		put_unaligned_le32(ctrl->dwClockFrequency, &data[26]);
+		data[30] = ctrl->bmFramingInfo;
+		data[31] = ctrl->bPreferedVersion;
+		data[32] = ctrl->bMinVersion;
+		data[33] = ctrl->bMaxVersion;
+	}
+
+	ret = __uvc_query_ctrl(stream->dev, UVC_SET_CUR, 0, stream->intfnum,
+		probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data,
+		size, uvc_timeout_param);
+	if (ret != size) {
+		uvc_printk(KERN_ERR, "Failed to set UVC %s control : "
+			"%d (exp. %u).\n", probe ? "probe" : "commit",
+			ret, size);
+		ret = -EIO;
+	}
+
+	kfree(data);
+	return ret;
+}
+
+int uvc_probe_video(struct uvc_streaming *stream,
+	struct uvc_streaming_control *probe)
+{
+	struct uvc_streaming_control probe_min, probe_max;
+	u16 bandwidth;
+	unsigned int i;
+	int ret;
+
+	/* Perform probing. The device should adjust the requested values
+	 * according to its capabilities. However, some devices, namely the
+	 * first generation UVC Logitech webcams, don't implement the Video
+	 * Probe control properly, and just return the needed bandwidth. For
+	 * that reason, if the needed bandwidth exceeds the maximum available
+	 * bandwidth, try to lower the quality.
+	 */
+	ret = uvc_set_video_ctrl(stream, probe, 1);
+	if (ret < 0)
+		goto done;
+
+	/* Get the minimum and maximum values for compression settings. */
+	if (!(stream->dev->quirks & UVC_QUIRK_PROBE_MINMAX)) {
+		ret = uvc_get_video_ctrl(stream, &probe_min, 1, UVC_GET_MIN);
+		if (ret < 0)
+			goto done;
+		ret = uvc_get_video_ctrl(stream, &probe_max, 1, UVC_GET_MAX);
+		if (ret < 0)
+			goto done;
+
+		probe->wCompQuality = probe_max.wCompQuality;
+	}
+
+	for (i = 0; i < 2; ++i) {
+		ret = uvc_set_video_ctrl(stream, probe, 1);
+		if (ret < 0)
+			goto done;
+		ret = uvc_get_video_ctrl(stream, probe, 1, UVC_GET_CUR);
+		if (ret < 0)
+			goto done;
+
+		if (stream->intf->num_altsetting == 1)
+			break;
+
+		bandwidth = probe->dwMaxPayloadTransferSize;
+		if (bandwidth <= stream->maxpsize)
+			break;
+
+		if (stream->dev->quirks & UVC_QUIRK_PROBE_MINMAX) {
+			ret = -ENOSPC;
+			goto done;
+		}
+
+		/* TODO: negotiate compression parameters */
+		probe->wKeyFrameRate = probe_min.wKeyFrameRate;
+		probe->wPFrameRate = probe_min.wPFrameRate;
+		probe->wCompQuality = probe_max.wCompQuality;
+		probe->wCompWindowSize = probe_min.wCompWindowSize;
+	}
+
+done:
+	return ret;
+}
+
+static int uvc_commit_video(struct uvc_streaming *stream,
+			    struct uvc_streaming_control *probe)
+{
+	return uvc_set_video_ctrl(stream, probe, 0);
+}
+
+/* -----------------------------------------------------------------------------
+ * Clocks and timestamps
+ */
+
+static inline ktime_t uvc_video_get_time(void)
+{
+	if (uvc_clock_param == CLOCK_MONOTONIC)
+		return ktime_get();
+	else
+		return ktime_get_real();
+}
+
+static void
+uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf,
+		       const u8 *data, int len)
+{
+	struct uvc_clock_sample *sample;
+	unsigned int header_size;
+	bool has_pts = false;
+	bool has_scr = false;
+	unsigned long flags;
+	ktime_t time;
+	u16 host_sof;
+	u16 dev_sof;
+
+	switch (data[1] & (UVC_STREAM_PTS | UVC_STREAM_SCR)) {
+	case UVC_STREAM_PTS | UVC_STREAM_SCR:
+		header_size = 12;
+		has_pts = true;
+		has_scr = true;
+		break;
+	case UVC_STREAM_PTS:
+		header_size = 6;
+		has_pts = true;
+		break;
+	case UVC_STREAM_SCR:
+		header_size = 8;
+		has_scr = true;
+		break;
+	default:
+		header_size = 2;
+		break;
+	}
+
+	/* Check for invalid headers. */
+	if (len < header_size)
+		return;
+
+	/* Extract the timestamps:
+	 *
+	 * - store the frame PTS in the buffer structure
+	 * - if the SCR field is present, retrieve the host SOF counter and
+	 *   kernel timestamps and store them with the SCR STC and SOF fields
+	 *   in the ring buffer
+	 */
+	if (has_pts && buf != NULL)
+		buf->pts = get_unaligned_le32(&data[2]);
+
+	if (!has_scr)
+		return;
+
+	/* To limit the amount of data, drop SCRs with an SOF identical to the
+	 * previous one.
+	 */
+	dev_sof = get_unaligned_le16(&data[header_size - 2]);
+	if (dev_sof == stream->clock.last_sof)
+		return;
+
+	stream->clock.last_sof = dev_sof;
+
+	host_sof = usb_get_current_frame_number(stream->dev->udev);
+	time = uvc_video_get_time();
+
+	/* The UVC specification allows device implementations that can't obtain
+	 * the USB frame number to keep their own frame counters as long as they
+	 * match the size and frequency of the frame number associated with USB
+	 * SOF tokens. The SOF values sent by such devices differ from the USB
+	 * SOF tokens by a fixed offset that needs to be estimated and accounted
+	 * for to make timestamp recovery as accurate as possible.
+	 *
+	 * The offset is estimated the first time a device SOF value is received
+	 * as the difference between the host and device SOF values. As the two
+	 * SOF values can differ slightly due to transmission delays, consider
+	 * that the offset is null if the difference is not higher than 10 ms
+	 * (negative differences can not happen and are thus considered as an
+	 * offset). The video commit control wDelay field should be used to
+	 * compute a dynamic threshold instead of using a fixed 10 ms value, but
+	 * devices don't report reliable wDelay values.
+	 *
+	 * See uvc_video_clock_host_sof() for an explanation regarding why only
+	 * the 8 LSBs of the delta are kept.
+	 */
+	if (stream->clock.sof_offset == (u16)-1) {
+		u16 delta_sof = (host_sof - dev_sof) & 255;
+		if (delta_sof >= 10)
+			stream->clock.sof_offset = delta_sof;
+		else
+			stream->clock.sof_offset = 0;
+	}
+
+	dev_sof = (dev_sof + stream->clock.sof_offset) & 2047;
+
+	spin_lock_irqsave(&stream->clock.lock, flags);
+
+	sample = &stream->clock.samples[stream->clock.head];
+	sample->dev_stc = get_unaligned_le32(&data[header_size - 6]);
+	sample->dev_sof = dev_sof;
+	sample->host_sof = host_sof;
+	sample->host_time = time;
+
+	/* Update the sliding window head and count. */
+	stream->clock.head = (stream->clock.head + 1) % stream->clock.size;
+
+	if (stream->clock.count < stream->clock.size)
+		stream->clock.count++;
+
+	spin_unlock_irqrestore(&stream->clock.lock, flags);
+}
+
+static void uvc_video_clock_reset(struct uvc_streaming *stream)
+{
+	struct uvc_clock *clock = &stream->clock;
+
+	clock->head = 0;
+	clock->count = 0;
+	clock->last_sof = -1;
+	clock->sof_offset = -1;
+}
+
+static int uvc_video_clock_init(struct uvc_streaming *stream)
+{
+	struct uvc_clock *clock = &stream->clock;
+
+	spin_lock_init(&clock->lock);
+	clock->size = 32;
+
+	clock->samples = kmalloc_array(clock->size, sizeof(*clock->samples),
+				       GFP_KERNEL);
+	if (clock->samples == NULL)
+		return -ENOMEM;
+
+	uvc_video_clock_reset(stream);
+
+	return 0;
+}
+
+static void uvc_video_clock_cleanup(struct uvc_streaming *stream)
+{
+	kfree(stream->clock.samples);
+	stream->clock.samples = NULL;
+}
+
+/*
+ * uvc_video_clock_host_sof - Return the host SOF value for a clock sample
+ *
+ * Host SOF counters reported by usb_get_current_frame_number() usually don't
+ * cover the whole 11-bits SOF range (0-2047) but are limited to the HCI frame
+ * schedule window. They can be limited to 8, 9 or 10 bits depending on the host
+ * controller and its configuration.
+ *
+ * We thus need to recover the SOF value corresponding to the host frame number.
+ * As the device and host frame numbers are sampled in a short interval, the
+ * difference between their values should be equal to a small delta plus an
+ * integer multiple of 256 caused by the host frame number limited precision.
+ *
+ * To obtain the recovered host SOF value, compute the small delta by masking
+ * the high bits of the host frame counter and device SOF difference and add it
+ * to the device SOF value.
+ */
+static u16 uvc_video_clock_host_sof(const struct uvc_clock_sample *sample)
+{
+	/* The delta value can be negative. */
+	s8 delta_sof;
+
+	delta_sof = (sample->host_sof - sample->dev_sof) & 255;
+
+	return (sample->dev_sof + delta_sof) & 2047;
+}
+
+/*
+ * uvc_video_clock_update - Update the buffer timestamp
+ *
+ * This function converts the buffer PTS timestamp to the host clock domain by
+ * going through the USB SOF clock domain and stores the result in the V4L2
+ * buffer timestamp field.
+ *
+ * The relationship between the device clock and the host clock isn't known.
+ * However, the device and the host share the common USB SOF clock which can be
+ * used to recover that relationship.
+ *
+ * The relationship between the device clock and the USB SOF clock is considered
+ * to be linear over the clock samples sliding window and is given by
+ *
+ * SOF = m * PTS + p
+ *
+ * Several methods to compute the slope (m) and intercept (p) can be used. As
+ * the clock drift should be small compared to the sliding window size, we
+ * assume that the line that goes through the points at both ends of the window
+ * is a good approximation. Naming those points P1 and P2, we get
+ *
+ * SOF = (SOF2 - SOF1) / (STC2 - STC1) * PTS
+ *     + (SOF1 * STC2 - SOF2 * STC1) / (STC2 - STC1)
+ *
+ * or
+ *
+ * SOF = ((SOF2 - SOF1) * PTS + SOF1 * STC2 - SOF2 * STC1) / (STC2 - STC1)   (1)
+ *
+ * to avoid losing precision in the division. Similarly, the host timestamp is
+ * computed with
+ *
+ * TS = ((TS2 - TS1) * SOF + TS1 * SOF2 - TS2 * SOF1) / (SOF2 - SOF1)	     (2)
+ *
+ * SOF values are coded on 11 bits by USB. We extend their precision with 16
+ * decimal bits, leading to a 11.16 coding.
+ *
+ * TODO: To avoid surprises with device clock values, PTS/STC timestamps should
+ * be normalized using the nominal device clock frequency reported through the
+ * UVC descriptors.
+ *
+ * Both the PTS/STC and SOF counters roll over, after a fixed but device
+ * specific amount of time for PTS/STC and after 2048ms for SOF. As long as the
+ * sliding window size is smaller than the rollover period, differences computed
+ * on unsigned integers will produce the correct result. However, the p term in
+ * the linear relations will be miscomputed.
+ *
+ * To fix the issue, we subtract a constant from the PTS and STC values to bring
+ * PTS to half the 32 bit STC range. The sliding window STC values then fit into
+ * the 32 bit range without any rollover.
+ *
+ * Similarly, we add 2048 to the device SOF values to make sure that the SOF
+ * computed by (1) will never be smaller than 0. This offset is then compensated
+ * by adding 2048 to the SOF values used in (2). However, this doesn't prevent
+ * rollovers between (1) and (2): the SOF value computed by (1) can be slightly
+ * lower than 4096, and the host SOF counters can have rolled over to 2048. This
+ * case is handled by subtracting 2048 from the SOF value if it exceeds the host
+ * SOF value at the end of the sliding window.
+ *
+ * Finally we subtract a constant from the host timestamps to bring the first
+ * timestamp of the sliding window to 1s.
+ */
+void uvc_video_clock_update(struct uvc_streaming *stream,
+			    struct vb2_v4l2_buffer *vbuf,
+			    struct uvc_buffer *buf)
+{
+	struct uvc_clock *clock = &stream->clock;
+	struct uvc_clock_sample *first;
+	struct uvc_clock_sample *last;
+	unsigned long flags;
+	u64 timestamp;
+	u32 delta_stc;
+	u32 y1, y2;
+	u32 x1, x2;
+	u32 mean;
+	u32 sof;
+	u64 y;
+
+	if (!uvc_hw_timestamps_param)
+		return;
+
+	/*
+	 * We will get called from __vb2_queue_cancel() if there are buffers
+	 * done but not dequeued by the user, but the sample array has already
+	 * been released at that time. Just bail out in that case.
+	 */
+	if (!clock->samples)
+		return;
+
+	spin_lock_irqsave(&clock->lock, flags);
+
+	if (clock->count < clock->size)
+		goto done;
+
+	first = &clock->samples[clock->head];
+	last = &clock->samples[(clock->head - 1) % clock->size];
+
+	/* First step, PTS to SOF conversion. */
+	delta_stc = buf->pts - (1UL << 31);
+	x1 = first->dev_stc - delta_stc;
+	x2 = last->dev_stc - delta_stc;
+	if (x1 == x2)
+		goto done;
+
+	y1 = (first->dev_sof + 2048) << 16;
+	y2 = (last->dev_sof + 2048) << 16;
+	if (y2 < y1)
+		y2 += 2048 << 16;
+
+	y = (u64)(y2 - y1) * (1ULL << 31) + (u64)y1 * (u64)x2
+	  - (u64)y2 * (u64)x1;
+	y = div_u64(y, x2 - x1);
+
+	sof = y;
+
+	uvc_trace(UVC_TRACE_CLOCK, "%s: PTS %u y %llu.%06llu SOF %u.%06llu "
+		  "(x1 %u x2 %u y1 %u y2 %u SOF offset %u)\n",
+		  stream->dev->name, buf->pts,
+		  y >> 16, div_u64((y & 0xffff) * 1000000, 65536),
+		  sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536),
+		  x1, x2, y1, y2, clock->sof_offset);
+
+	/* Second step, SOF to host clock conversion. */
+	x1 = (uvc_video_clock_host_sof(first) + 2048) << 16;
+	x2 = (uvc_video_clock_host_sof(last) + 2048) << 16;
+	if (x2 < x1)
+		x2 += 2048 << 16;
+	if (x1 == x2)
+		goto done;
+
+	y1 = NSEC_PER_SEC;
+	y2 = (u32)ktime_to_ns(ktime_sub(last->host_time, first->host_time)) + y1;
+
+	/* Interpolated and host SOF timestamps can wrap around at slightly
+	 * different times. Handle this by adding or removing 2048 to or from
+	 * the computed SOF value to keep it close to the SOF samples mean
+	 * value.
+	 */
+	mean = (x1 + x2) / 2;
+	if (mean - (1024 << 16) > sof)
+		sof += 2048 << 16;
+	else if (sof > mean + (1024 << 16))
+		sof -= 2048 << 16;
+
+	y = (u64)(y2 - y1) * (u64)sof + (u64)y1 * (u64)x2
+	  - (u64)y2 * (u64)x1;
+	y = div_u64(y, x2 - x1);
+
+	timestamp = ktime_to_ns(first->host_time) + y - y1;
+
+	uvc_trace(UVC_TRACE_CLOCK, "%s: SOF %u.%06llu y %llu ts %llu "
+		  "buf ts %llu (x1 %u/%u/%u x2 %u/%u/%u y1 %u y2 %u)\n",
+		  stream->dev->name,
+		  sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536),
+		  y, timestamp, vbuf->vb2_buf.timestamp,
+		  x1, first->host_sof, first->dev_sof,
+		  x2, last->host_sof, last->dev_sof, y1, y2);
+
+	/* Update the V4L2 buffer. */
+	vbuf->vb2_buf.timestamp = timestamp;
+
+done:
+	spin_unlock_irqrestore(&clock->lock, flags);
+}
+
+/* ------------------------------------------------------------------------
+ * Stream statistics
+ */
+
+static void uvc_video_stats_decode(struct uvc_streaming *stream,
+		const u8 *data, int len)
+{
+	unsigned int header_size;
+	bool has_pts = false;
+	bool has_scr = false;
+	u16 scr_sof;
+	u32 scr_stc;
+	u32 pts;
+
+	if (stream->stats.stream.nb_frames == 0 &&
+	    stream->stats.frame.nb_packets == 0)
+		stream->stats.stream.start_ts = ktime_get();
+
+	switch (data[1] & (UVC_STREAM_PTS | UVC_STREAM_SCR)) {
+	case UVC_STREAM_PTS | UVC_STREAM_SCR:
+		header_size = 12;
+		has_pts = true;
+		has_scr = true;
+		break;
+	case UVC_STREAM_PTS:
+		header_size = 6;
+		has_pts = true;
+		break;
+	case UVC_STREAM_SCR:
+		header_size = 8;
+		has_scr = true;
+		break;
+	default:
+		header_size = 2;
+		break;
+	}
+
+	/* Check for invalid headers. */
+	if (len < header_size || data[0] < header_size) {
+		stream->stats.frame.nb_invalid++;
+		return;
+	}
+
+	/* Extract the timestamps. */
+	if (has_pts)
+		pts = get_unaligned_le32(&data[2]);
+
+	if (has_scr) {
+		scr_stc = get_unaligned_le32(&data[header_size - 6]);
+		scr_sof = get_unaligned_le16(&data[header_size - 2]);
+	}
+
+	/* Is PTS constant through the whole frame ? */
+	if (has_pts && stream->stats.frame.nb_pts) {
+		if (stream->stats.frame.pts != pts) {
+			stream->stats.frame.nb_pts_diffs++;
+			stream->stats.frame.last_pts_diff =
+				stream->stats.frame.nb_packets;
+		}
+	}
+
+	if (has_pts) {
+		stream->stats.frame.nb_pts++;
+		stream->stats.frame.pts = pts;
+	}
+
+	/* Do all frames have a PTS in their first non-empty packet, or before
+	 * their first empty packet ?
+	 */
+	if (stream->stats.frame.size == 0) {
+		if (len > header_size)
+			stream->stats.frame.has_initial_pts = has_pts;
+		if (len == header_size && has_pts)
+			stream->stats.frame.has_early_pts = true;
+	}
+
+	/* Do the SCR.STC and SCR.SOF fields vary through the frame ? */
+	if (has_scr && stream->stats.frame.nb_scr) {
+		if (stream->stats.frame.scr_stc != scr_stc)
+			stream->stats.frame.nb_scr_diffs++;
+	}
+
+	if (has_scr) {
+		/* Expand the SOF counter to 32 bits and store its value. */
+		if (stream->stats.stream.nb_frames > 0 ||
+		    stream->stats.frame.nb_scr > 0)
+			stream->stats.stream.scr_sof_count +=
+				(scr_sof - stream->stats.stream.scr_sof) % 2048;
+		stream->stats.stream.scr_sof = scr_sof;
+
+		stream->stats.frame.nb_scr++;
+		stream->stats.frame.scr_stc = scr_stc;
+		stream->stats.frame.scr_sof = scr_sof;
+
+		if (scr_sof < stream->stats.stream.min_sof)
+			stream->stats.stream.min_sof = scr_sof;
+		if (scr_sof > stream->stats.stream.max_sof)
+			stream->stats.stream.max_sof = scr_sof;
+	}
+
+	/* Record the first non-empty packet number. */
+	if (stream->stats.frame.size == 0 && len > header_size)
+		stream->stats.frame.first_data = stream->stats.frame.nb_packets;
+
+	/* Update the frame size. */
+	stream->stats.frame.size += len - header_size;
+
+	/* Update the packets counters. */
+	stream->stats.frame.nb_packets++;
+	if (len <= header_size)
+		stream->stats.frame.nb_empty++;
+
+	if (data[1] & UVC_STREAM_ERR)
+		stream->stats.frame.nb_errors++;
+}
+
+static void uvc_video_stats_update(struct uvc_streaming *stream)
+{
+	struct uvc_stats_frame *frame = &stream->stats.frame;
+
+	uvc_trace(UVC_TRACE_STATS, "frame %u stats: %u/%u/%u packets, "
+		  "%u/%u/%u pts (%searly %sinitial), %u/%u scr, "
+		  "last pts/stc/sof %u/%u/%u\n",
+		  stream->sequence, frame->first_data,
+		  frame->nb_packets - frame->nb_empty, frame->nb_packets,
+		  frame->nb_pts_diffs, frame->last_pts_diff, frame->nb_pts,
+		  frame->has_early_pts ? "" : "!",
+		  frame->has_initial_pts ? "" : "!",
+		  frame->nb_scr_diffs, frame->nb_scr,
+		  frame->pts, frame->scr_stc, frame->scr_sof);
+
+	stream->stats.stream.nb_frames++;
+	stream->stats.stream.nb_packets += stream->stats.frame.nb_packets;
+	stream->stats.stream.nb_empty += stream->stats.frame.nb_empty;
+	stream->stats.stream.nb_errors += stream->stats.frame.nb_errors;
+	stream->stats.stream.nb_invalid += stream->stats.frame.nb_invalid;
+
+	if (frame->has_early_pts)
+		stream->stats.stream.nb_pts_early++;
+	if (frame->has_initial_pts)
+		stream->stats.stream.nb_pts_initial++;
+	if (frame->last_pts_diff <= frame->first_data)
+		stream->stats.stream.nb_pts_constant++;
+	if (frame->nb_scr >= frame->nb_packets - frame->nb_empty)
+		stream->stats.stream.nb_scr_count_ok++;
+	if (frame->nb_scr_diffs + 1 == frame->nb_scr)
+		stream->stats.stream.nb_scr_diffs_ok++;
+
+	memset(&stream->stats.frame, 0, sizeof(stream->stats.frame));
+}
+
+size_t uvc_video_stats_dump(struct uvc_streaming *stream, char *buf,
+			    size_t size)
+{
+	unsigned int scr_sof_freq;
+	unsigned int duration;
+	size_t count = 0;
+
+	/* Compute the SCR.SOF frequency estimate. At the nominal 1kHz SOF
+	 * frequency this will not overflow before more than 1h.
+	 */
+	duration = ktime_ms_delta(stream->stats.stream.stop_ts,
+				  stream->stats.stream.start_ts);
+	if (duration != 0)
+		scr_sof_freq = stream->stats.stream.scr_sof_count * 1000
+			     / duration;
+	else
+		scr_sof_freq = 0;
+
+	count += scnprintf(buf + count, size - count,
+			   "frames:  %u\npackets: %u\nempty:   %u\n"
+			   "errors:  %u\ninvalid: %u\n",
+			   stream->stats.stream.nb_frames,
+			   stream->stats.stream.nb_packets,
+			   stream->stats.stream.nb_empty,
+			   stream->stats.stream.nb_errors,
+			   stream->stats.stream.nb_invalid);
+	count += scnprintf(buf + count, size - count,
+			   "pts: %u early, %u initial, %u ok\n",
+			   stream->stats.stream.nb_pts_early,
+			   stream->stats.stream.nb_pts_initial,
+			   stream->stats.stream.nb_pts_constant);
+	count += scnprintf(buf + count, size - count,
+			   "scr: %u count ok, %u diff ok\n",
+			   stream->stats.stream.nb_scr_count_ok,
+			   stream->stats.stream.nb_scr_diffs_ok);
+	count += scnprintf(buf + count, size - count,
+			   "sof: %u <= sof <= %u, freq %u.%03u kHz\n",
+			   stream->stats.stream.min_sof,
+			   stream->stats.stream.max_sof,
+			   scr_sof_freq / 1000, scr_sof_freq % 1000);
+
+	return count;
+}
+
+static void uvc_video_stats_start(struct uvc_streaming *stream)
+{
+	memset(&stream->stats, 0, sizeof(stream->stats));
+	stream->stats.stream.min_sof = 2048;
+}
+
+static void uvc_video_stats_stop(struct uvc_streaming *stream)
+{
+	stream->stats.stream.stop_ts = ktime_get();
+}
+
+/* ------------------------------------------------------------------------
+ * Video codecs
+ */
+
+/* Video payload decoding is handled by uvc_video_decode_start(),
+ * uvc_video_decode_data() and uvc_video_decode_end().
+ *
+ * uvc_video_decode_start is called with URB data at the start of a bulk or
+ * isochronous payload. It processes header data and returns the header size
+ * in bytes if successful. If an error occurs, it returns a negative error
+ * code. The following error codes have special meanings.
+ *
+ * - EAGAIN informs the caller that the current video buffer should be marked
+ *   as done, and that the function should be called again with the same data
+ *   and a new video buffer. This is used when end of frame conditions can be
+ *   reliably detected at the beginning of the next frame only.
+ *
+ * If an error other than -EAGAIN is returned, the caller will drop the current
+ * payload. No call to uvc_video_decode_data and uvc_video_decode_end will be
+ * made until the next payload. -ENODATA can be used to drop the current
+ * payload if no other error code is appropriate.
+ *
+ * uvc_video_decode_data is called for every URB with URB data. It copies the
+ * data to the video buffer.
+ *
+ * uvc_video_decode_end is called with header data at the end of a bulk or
+ * isochronous payload. It performs any additional header data processing and
+ * returns 0 or a negative error code if an error occurred. As header data have
+ * already been processed by uvc_video_decode_start, this functions isn't
+ * required to perform sanity checks a second time.
+ *
+ * For isochronous transfers where a payload is always transferred in a single
+ * URB, the three functions will be called in a row.
+ *
+ * To let the decoder process header data and update its internal state even
+ * when no video buffer is available, uvc_video_decode_start must be prepared
+ * to be called with a NULL buf parameter. uvc_video_decode_data and
+ * uvc_video_decode_end will never be called with a NULL buffer.
+ */
+static int uvc_video_decode_start(struct uvc_streaming *stream,
+		struct uvc_buffer *buf, const u8 *data, int len)
+{
+	u8 fid;
+
+	/* Sanity checks:
+	 * - packet must be at least 2 bytes long
+	 * - bHeaderLength value must be at least 2 bytes (see above)
+	 * - bHeaderLength value can't be larger than the packet size.
+	 */
+	if (len < 2 || data[0] < 2 || data[0] > len) {
+		stream->stats.frame.nb_invalid++;
+		return -EINVAL;
+	}
+
+	fid = data[1] & UVC_STREAM_FID;
+
+	/* Increase the sequence number regardless of any buffer states, so
+	 * that discontinuous sequence numbers always indicate lost frames.
+	 */
+	if (stream->last_fid != fid) {
+		stream->sequence++;
+		if (stream->sequence)
+			uvc_video_stats_update(stream);
+	}
+
+	uvc_video_clock_decode(stream, buf, data, len);
+	uvc_video_stats_decode(stream, data, len);
+
+	/* Store the payload FID bit and return immediately when the buffer is
+	 * NULL.
+	 */
+	if (buf == NULL) {
+		stream->last_fid = fid;
+		return -ENODATA;
+	}
+
+	/* Mark the buffer as bad if the error bit is set. */
+	if (data[1] & UVC_STREAM_ERR) {
+		uvc_trace(UVC_TRACE_FRAME, "Marking buffer as bad (error bit "
+			  "set).\n");
+		buf->error = 1;
+	}
+
+	/* Synchronize to the input stream by waiting for the FID bit to be
+	 * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+	 * stream->last_fid is initialized to -1, so the first isochronous
+	 * frame will always be in sync.
+	 *
+	 * If the device doesn't toggle the FID bit, invert stream->last_fid
+	 * when the EOF bit is set to force synchronisation on the next packet.
+	 */
+	if (buf->state != UVC_BUF_STATE_ACTIVE) {
+		if (fid == stream->last_fid) {
+			uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of "
+				"sync).\n");
+			if ((stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID) &&
+			    (data[1] & UVC_STREAM_EOF))
+				stream->last_fid ^= UVC_STREAM_FID;
+			return -ENODATA;
+		}
+
+		buf->buf.field = V4L2_FIELD_NONE;
+		buf->buf.sequence = stream->sequence;
+		buf->buf.vb2_buf.timestamp = ktime_to_ns(uvc_video_get_time());
+
+		/* TODO: Handle PTS and SCR. */
+		buf->state = UVC_BUF_STATE_ACTIVE;
+	}
+
+	/* Mark the buffer as done if we're at the beginning of a new frame.
+	 * End of frame detection is better implemented by checking the EOF
+	 * bit (FID bit toggling is delayed by one frame compared to the EOF
+	 * bit), but some devices don't set the bit at end of frame (and the
+	 * last payload can be lost anyway). We thus must check if the FID has
+	 * been toggled.
+	 *
+	 * stream->last_fid is initialized to -1, so the first isochronous
+	 * frame will never trigger an end of frame detection.
+	 *
+	 * Empty buffers (bytesused == 0) don't trigger end of frame detection
+	 * as it doesn't make sense to return an empty buffer. This also
+	 * avoids detecting end of frame conditions at FID toggling if the
+	 * previous payload had the EOF bit set.
+	 */
+	if (fid != stream->last_fid && buf->bytesused != 0) {
+		uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit "
+				"toggled).\n");
+		buf->state = UVC_BUF_STATE_READY;
+		return -EAGAIN;
+	}
+
+	stream->last_fid = fid;
+
+	return data[0];
+}
+
+/*
+ * uvc_video_decode_data_work: Asynchronous memcpy processing
+ *
+ * Copy URB data to video buffers in process context, releasing buffer
+ * references and requeuing the URB when done.
+ */
+static void uvc_video_copy_data_work(struct work_struct *work)
+{
+	struct uvc_urb *uvc_urb = container_of(work, struct uvc_urb, work);
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < uvc_urb->async_operations; i++) {
+		struct uvc_copy_op *op = &uvc_urb->copy_operations[i];
+
+		memcpy(op->dst, op->src, op->len);
+
+		/* Release reference taken on this buffer. */
+		uvc_queue_buffer_release(op->buf);
+	}
+
+	ret = usb_submit_urb(uvc_urb->urb, GFP_KERNEL);
+	if (ret < 0)
+		uvc_printk(KERN_ERR, "Failed to resubmit video URB (%d).\n",
+			   ret);
+}
+
+static void uvc_video_decode_data(struct uvc_urb *uvc_urb,
+		struct uvc_buffer *buf, const u8 *data, int len)
+{
+	unsigned int active_op = uvc_urb->async_operations;
+	struct uvc_copy_op *op = &uvc_urb->copy_operations[active_op];
+	unsigned int maxlen;
+
+	if (len <= 0)
+		return;
+
+	maxlen = buf->length - buf->bytesused;
+
+	/* Take a buffer reference for async work. */
+	kref_get(&buf->ref);
+
+	op->buf = buf;
+	op->src = data;
+	op->dst = buf->mem + buf->bytesused;
+	op->len = min_t(unsigned int, len, maxlen);
+
+	buf->bytesused += op->len;
+
+	/* Complete the current frame if the buffer size was exceeded. */
+	if (len > maxlen) {
+		uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n");
+		buf->error = 1;
+		buf->state = UVC_BUF_STATE_READY;
+	}
+
+	uvc_urb->async_operations++;
+}
+
+static void uvc_video_decode_end(struct uvc_streaming *stream,
+		struct uvc_buffer *buf, const u8 *data, int len)
+{
+	/* Mark the buffer as done if the EOF marker is set. */
+	if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
+		uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
+		if (data[0] == len)
+			uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n");
+		buf->state = UVC_BUF_STATE_READY;
+		if (stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID)
+			stream->last_fid ^= UVC_STREAM_FID;
+	}
+}
+
+/* Video payload encoding is handled by uvc_video_encode_header() and
+ * uvc_video_encode_data(). Only bulk transfers are currently supported.
+ *
+ * uvc_video_encode_header is called at the start of a payload. It adds header
+ * data to the transfer buffer and returns the header size. As the only known
+ * UVC output device transfers a whole frame in a single payload, the EOF bit
+ * is always set in the header.
+ *
+ * uvc_video_encode_data is called for every URB and copies the data from the
+ * video buffer to the transfer buffer.
+ */
+static int uvc_video_encode_header(struct uvc_streaming *stream,
+		struct uvc_buffer *buf, u8 *data, int len)
+{
+	data[0] = 2;	/* Header length */
+	data[1] = UVC_STREAM_EOH | UVC_STREAM_EOF
+		| (stream->last_fid & UVC_STREAM_FID);
+	return 2;
+}
+
+static int uvc_video_encode_data(struct uvc_streaming *stream,
+		struct uvc_buffer *buf, u8 *data, int len)
+{
+	struct uvc_video_queue *queue = &stream->queue;
+	unsigned int nbytes;
+	void *mem;
+
+	/* Copy video data to the URB buffer. */
+	mem = buf->mem + queue->buf_used;
+	nbytes = min((unsigned int)len, buf->bytesused - queue->buf_used);
+	nbytes = min(stream->bulk.max_payload_size - stream->bulk.payload_size,
+			nbytes);
+	memcpy(data, mem, nbytes);
+
+	queue->buf_used += nbytes;
+
+	return nbytes;
+}
+
+/* ------------------------------------------------------------------------
+ * Metadata
+ */
+
+/*
+ * Additionally to the payload headers we also want to provide the user with USB
+ * Frame Numbers and system time values. The resulting buffer is thus composed
+ * of blocks, containing a 64-bit timestamp in  nanoseconds, a 16-bit USB Frame
+ * Number, and a copy of the payload header.
+ *
+ * Ideally we want to capture all payload headers for each frame. However, their
+ * number is unknown and unbound. We thus drop headers that contain no vendor
+ * data and that either contain no SCR value or an SCR value identical to the
+ * previous header.
+ */
+static void uvc_video_decode_meta(struct uvc_streaming *stream,
+				  struct uvc_buffer *meta_buf,
+				  const u8 *mem, unsigned int length)
+{
+	struct uvc_meta_buf *meta;
+	size_t len_std = 2;
+	bool has_pts, has_scr;
+	unsigned long flags;
+	unsigned int sof;
+	ktime_t time;
+	const u8 *scr;
+
+	if (!meta_buf || length == 2)
+		return;
+
+	if (meta_buf->length - meta_buf->bytesused <
+	    length + sizeof(meta->ns) + sizeof(meta->sof)) {
+		meta_buf->error = 1;
+		return;
+	}
+
+	has_pts = mem[1] & UVC_STREAM_PTS;
+	has_scr = mem[1] & UVC_STREAM_SCR;
+
+	if (has_pts) {
+		len_std += 4;
+		scr = mem + 6;
+	} else {
+		scr = mem + 2;
+	}
+
+	if (has_scr)
+		len_std += 6;
+
+	if (stream->meta.format == V4L2_META_FMT_UVC)
+		length = len_std;
+
+	if (length == len_std && (!has_scr ||
+				  !memcmp(scr, stream->clock.last_scr, 6)))
+		return;
+
+	meta = (struct uvc_meta_buf *)((u8 *)meta_buf->mem + meta_buf->bytesused);
+	local_irq_save(flags);
+	time = uvc_video_get_time();
+	sof = usb_get_current_frame_number(stream->dev->udev);
+	local_irq_restore(flags);
+	put_unaligned(ktime_to_ns(time), &meta->ns);
+	put_unaligned(sof, &meta->sof);
+
+	if (has_scr)
+		memcpy(stream->clock.last_scr, scr, 6);
+
+	meta->length = mem[0];
+	meta->flags  = mem[1];
+	memcpy(meta->buf, &mem[2], length - 2);
+	meta_buf->bytesused += length + sizeof(meta->ns) + sizeof(meta->sof);
+
+	uvc_trace(UVC_TRACE_FRAME,
+		  "%s(): t-sys %lluns, SOF %u, len %u, flags 0x%x, PTS %u, STC %u frame SOF %u\n",
+		  __func__, ktime_to_ns(time), meta->sof, meta->length,
+		  meta->flags,
+		  has_pts ? *(u32 *)meta->buf : 0,
+		  has_scr ? *(u32 *)scr : 0,
+		  has_scr ? *(u32 *)(scr + 4) & 0x7ff : 0);
+}
+
+/* ------------------------------------------------------------------------
+ * URB handling
+ */
+
+/*
+ * Set error flag for incomplete buffer.
+ */
+static void uvc_video_validate_buffer(const struct uvc_streaming *stream,
+				      struct uvc_buffer *buf)
+{
+	if (stream->ctrl.dwMaxVideoFrameSize != buf->bytesused &&
+	    !(stream->cur_format->flags & UVC_FMT_FLAG_COMPRESSED))
+		buf->error = 1;
+}
+
+/*
+ * Completion handler for video URBs.
+ */
+
+static void uvc_video_next_buffers(struct uvc_streaming *stream,
+		struct uvc_buffer **video_buf, struct uvc_buffer **meta_buf)
+{
+	uvc_video_validate_buffer(stream, *video_buf);
+
+	if (*meta_buf) {
+		struct vb2_v4l2_buffer *vb2_meta = &(*meta_buf)->buf;
+		const struct vb2_v4l2_buffer *vb2_video = &(*video_buf)->buf;
+
+		vb2_meta->sequence = vb2_video->sequence;
+		vb2_meta->field = vb2_video->field;
+		vb2_meta->vb2_buf.timestamp = vb2_video->vb2_buf.timestamp;
+
+		(*meta_buf)->state = UVC_BUF_STATE_READY;
+		if (!(*meta_buf)->error)
+			(*meta_buf)->error = (*video_buf)->error;
+		*meta_buf = uvc_queue_next_buffer(&stream->meta.queue,
+						  *meta_buf);
+	}
+	*video_buf = uvc_queue_next_buffer(&stream->queue, *video_buf);
+}
+
+static void uvc_video_decode_isoc(struct uvc_urb *uvc_urb,
+			struct uvc_buffer *buf, struct uvc_buffer *meta_buf)
+{
+	struct urb *urb = uvc_urb->urb;
+	struct uvc_streaming *stream = uvc_urb->stream;
+	u8 *mem;
+	int ret, i;
+
+	for (i = 0; i < urb->number_of_packets; ++i) {
+		if (urb->iso_frame_desc[i].status < 0) {
+			uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
+				"lost (%d).\n", urb->iso_frame_desc[i].status);
+			/* Mark the buffer as faulty. */
+			if (buf != NULL)
+				buf->error = 1;
+			continue;
+		}
+
+		/* Decode the payload header. */
+		mem = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+		do {
+			ret = uvc_video_decode_start(stream, buf, mem,
+				urb->iso_frame_desc[i].actual_length);
+			if (ret == -EAGAIN)
+				uvc_video_next_buffers(stream, &buf, &meta_buf);
+		} while (ret == -EAGAIN);
+
+		if (ret < 0)
+			continue;
+
+		uvc_video_decode_meta(stream, meta_buf, mem, ret);
+
+		/* Decode the payload data. */
+		uvc_video_decode_data(uvc_urb, buf, mem + ret,
+			urb->iso_frame_desc[i].actual_length - ret);
+
+		/* Process the header again. */
+		uvc_video_decode_end(stream, buf, mem,
+			urb->iso_frame_desc[i].actual_length);
+
+		if (buf->state == UVC_BUF_STATE_READY)
+			uvc_video_next_buffers(stream, &buf, &meta_buf);
+	}
+}
+
+static void uvc_video_decode_bulk(struct uvc_urb *uvc_urb,
+			struct uvc_buffer *buf, struct uvc_buffer *meta_buf)
+{
+	struct urb *urb = uvc_urb->urb;
+	struct uvc_streaming *stream = uvc_urb->stream;
+	u8 *mem;
+	int len, ret;
+
+	/*
+	 * Ignore ZLPs if they're not part of a frame, otherwise process them
+	 * to trigger the end of payload detection.
+	 */
+	if (urb->actual_length == 0 && stream->bulk.header_size == 0)
+		return;
+
+	mem = urb->transfer_buffer;
+	len = urb->actual_length;
+	stream->bulk.payload_size += len;
+
+	/* If the URB is the first of its payload, decode and save the
+	 * header.
+	 */
+	if (stream->bulk.header_size == 0 && !stream->bulk.skip_payload) {
+		do {
+			ret = uvc_video_decode_start(stream, buf, mem, len);
+			if (ret == -EAGAIN)
+				uvc_video_next_buffers(stream, &buf, &meta_buf);
+		} while (ret == -EAGAIN);
+
+		/* If an error occurred skip the rest of the payload. */
+		if (ret < 0 || buf == NULL) {
+			stream->bulk.skip_payload = 1;
+		} else {
+			memcpy(stream->bulk.header, mem, ret);
+			stream->bulk.header_size = ret;
+
+			uvc_video_decode_meta(stream, meta_buf, mem, ret);
+
+			mem += ret;
+			len -= ret;
+		}
+	}
+
+	/* The buffer queue might have been cancelled while a bulk transfer
+	 * was in progress, so we can reach here with buf equal to NULL. Make
+	 * sure buf is never dereferenced if NULL.
+	 */
+
+	/* Prepare video data for processing. */
+	if (!stream->bulk.skip_payload && buf != NULL)
+		uvc_video_decode_data(uvc_urb, buf, mem, len);
+
+	/* Detect the payload end by a URB smaller than the maximum size (or
+	 * a payload size equal to the maximum) and process the header again.
+	 */
+	if (urb->actual_length < urb->transfer_buffer_length ||
+	    stream->bulk.payload_size >= stream->bulk.max_payload_size) {
+		if (!stream->bulk.skip_payload && buf != NULL) {
+			uvc_video_decode_end(stream, buf, stream->bulk.header,
+				stream->bulk.payload_size);
+			if (buf->state == UVC_BUF_STATE_READY)
+				uvc_video_next_buffers(stream, &buf, &meta_buf);
+		}
+
+		stream->bulk.header_size = 0;
+		stream->bulk.skip_payload = 0;
+		stream->bulk.payload_size = 0;
+	}
+}
+
+static void uvc_video_encode_bulk(struct uvc_urb *uvc_urb,
+	struct uvc_buffer *buf, struct uvc_buffer *meta_buf)
+{
+	struct urb *urb = uvc_urb->urb;
+	struct uvc_streaming *stream = uvc_urb->stream;
+
+	u8 *mem = urb->transfer_buffer;
+	int len = stream->urb_size, ret;
+
+	if (buf == NULL) {
+		urb->transfer_buffer_length = 0;
+		return;
+	}
+
+	/* If the URB is the first of its payload, add the header. */
+	if (stream->bulk.header_size == 0) {
+		ret = uvc_video_encode_header(stream, buf, mem, len);
+		stream->bulk.header_size = ret;
+		stream->bulk.payload_size += ret;
+		mem += ret;
+		len -= ret;
+	}
+
+	/* Process video data. */
+	ret = uvc_video_encode_data(stream, buf, mem, len);
+
+	stream->bulk.payload_size += ret;
+	len -= ret;
+
+	if (buf->bytesused == stream->queue.buf_used ||
+	    stream->bulk.payload_size == stream->bulk.max_payload_size) {
+		if (buf->bytesused == stream->queue.buf_used) {
+			stream->queue.buf_used = 0;
+			buf->state = UVC_BUF_STATE_READY;
+			buf->buf.sequence = ++stream->sequence;
+			uvc_queue_next_buffer(&stream->queue, buf);
+			stream->last_fid ^= UVC_STREAM_FID;
+		}
+
+		stream->bulk.header_size = 0;
+		stream->bulk.payload_size = 0;
+	}
+
+	urb->transfer_buffer_length = stream->urb_size - len;
+}
+
+static void uvc_video_complete(struct urb *urb)
+{
+	struct uvc_urb *uvc_urb = urb->context;
+	struct uvc_streaming *stream = uvc_urb->stream;
+	struct uvc_video_queue *queue = &stream->queue;
+	struct uvc_video_queue *qmeta = &stream->meta.queue;
+	struct vb2_queue *vb2_qmeta = stream->meta.vdev.queue;
+	struct uvc_buffer *buf = NULL;
+	struct uvc_buffer *buf_meta = NULL;
+	unsigned long flags;
+	int ret;
+
+	switch (urb->status) {
+	case 0:
+		break;
+
+	default:
+		uvc_printk(KERN_WARNING, "Non-zero status (%d) in video "
+			"completion handler.\n", urb->status);
+		fallthrough;
+	case -ENOENT:		/* usb_poison_urb() called. */
+		if (stream->frozen)
+			return;
+		fallthrough;
+	case -ECONNRESET:	/* usb_unlink_urb() called. */
+	case -ESHUTDOWN:	/* The endpoint is being disabled. */
+		uvc_queue_cancel(queue, urb->status == -ESHUTDOWN);
+		if (vb2_qmeta)
+			uvc_queue_cancel(qmeta, urb->status == -ESHUTDOWN);
+		return;
+	}
+
+	buf = uvc_queue_get_current_buffer(queue);
+
+	if (vb2_qmeta) {
+		spin_lock_irqsave(&qmeta->irqlock, flags);
+		if (!list_empty(&qmeta->irqqueue))
+			buf_meta = list_first_entry(&qmeta->irqqueue,
+						    struct uvc_buffer, queue);
+		spin_unlock_irqrestore(&qmeta->irqlock, flags);
+	}
+
+	/* Re-initialise the URB async work. */
+	uvc_urb->async_operations = 0;
+
+	/*
+	 * Process the URB headers, and optionally queue expensive memcpy tasks
+	 * to be deferred to a work queue.
+	 */
+	stream->decode(uvc_urb, buf, buf_meta);
+
+	/* If no async work is needed, resubmit the URB immediately. */
+	if (!uvc_urb->async_operations) {
+		ret = usb_submit_urb(uvc_urb->urb, GFP_ATOMIC);
+		if (ret < 0)
+			uvc_printk(KERN_ERR,
+				   "Failed to resubmit video URB (%d).\n",
+				   ret);
+		return;
+	}
+
+	queue_work(stream->async_wq, &uvc_urb->work);
+}
+
+/*
+ * Free transfer buffers.
+ */
+static void uvc_free_urb_buffers(struct uvc_streaming *stream)
+{
+	struct uvc_urb *uvc_urb;
+
+	for_each_uvc_urb(uvc_urb, stream) {
+		if (!uvc_urb->buffer)
+			continue;
+
+#ifndef CONFIG_DMA_NONCOHERENT
+		usb_free_coherent(stream->dev->udev, stream->urb_size,
+				  uvc_urb->buffer, uvc_urb->dma);
+#else
+		kfree(uvc_urb->buffer);
+#endif
+		uvc_urb->buffer = NULL;
+	}
+
+	stream->urb_size = 0;
+}
+
+/*
+ * Allocate transfer buffers. This function can be called with buffers
+ * already allocated when resuming from suspend, in which case it will
+ * return without touching the buffers.
+ *
+ * Limit the buffer size to UVC_MAX_PACKETS bulk/isochronous packets. If the
+ * system is too low on memory try successively smaller numbers of packets
+ * until allocation succeeds.
+ *
+ * Return the number of allocated packets on success or 0 when out of memory.
+ */
+static int uvc_alloc_urb_buffers(struct uvc_streaming *stream,
+	unsigned int size, unsigned int psize, gfp_t gfp_flags)
+{
+	unsigned int npackets;
+	unsigned int i;
+
+	/* Buffers are already allocated, bail out. */
+	if (stream->urb_size)
+		return stream->urb_size / psize;
+
+	/* Compute the number of packets. Bulk endpoints might transfer UVC
+	 * payloads across multiple URBs.
+	 */
+	npackets = DIV_ROUND_UP(size, psize);
+	if (npackets > UVC_MAX_PACKETS)
+		npackets = UVC_MAX_PACKETS;
+
+	/* Retry allocations until one succeed. */
+	for (; npackets > 1; npackets /= 2) {
+		for (i = 0; i < UVC_URBS; ++i) {
+			struct uvc_urb *uvc_urb = &stream->uvc_urb[i];
+
+			stream->urb_size = psize * npackets;
+#ifndef CONFIG_DMA_NONCOHERENT
+			uvc_urb->buffer = usb_alloc_coherent(
+				stream->dev->udev, stream->urb_size,
+				gfp_flags | __GFP_NOWARN, &uvc_urb->dma);
+#else
+			uvc_urb->buffer =
+			    kmalloc(stream->urb_size, gfp_flags | __GFP_NOWARN);
+#endif
+			if (!uvc_urb->buffer) {
+				uvc_free_urb_buffers(stream);
+				break;
+			}
+
+			uvc_urb->stream = stream;
+		}
+
+		if (i == UVC_URBS) {
+			uvc_trace(UVC_TRACE_VIDEO, "Allocated %u URB buffers "
+				"of %ux%u bytes each.\n", UVC_URBS, npackets,
+				psize);
+			return npackets;
+		}
+	}
+
+	uvc_trace(UVC_TRACE_VIDEO, "Failed to allocate URB buffers (%u bytes "
+		"per packet).\n", psize);
+	return 0;
+}
+
+/*
+ * Uninitialize isochronous/bulk URBs and free transfer buffers.
+ */
+static void uvc_video_stop_transfer(struct uvc_streaming *stream,
+				    int free_buffers)
+{
+	struct uvc_urb *uvc_urb;
+
+	uvc_video_stats_stop(stream);
+
+	/*
+	 * We must poison the URBs rather than kill them to ensure that even
+	 * after the completion handler returns, any asynchronous workqueues
+	 * will be prevented from resubmitting the URBs.
+	 */
+	for_each_uvc_urb(uvc_urb, stream)
+		usb_poison_urb(uvc_urb->urb);
+
+	flush_workqueue(stream->async_wq);
+
+	for_each_uvc_urb(uvc_urb, stream) {
+		usb_free_urb(uvc_urb->urb);
+		uvc_urb->urb = NULL;
+	}
+
+	if (free_buffers)
+		uvc_free_urb_buffers(stream);
+}
+
+/*
+ * Compute the maximum number of bytes per interval for an endpoint.
+ */
+static unsigned int uvc_endpoint_max_bpi(struct usb_device *dev,
+					 struct usb_host_endpoint *ep)
+{
+	u16 psize;
+	u16 mult;
+
+	switch (dev->speed) {
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
+	case USB_SPEED_HIGH:
+		psize = usb_endpoint_maxp(&ep->desc);
+		mult = usb_endpoint_maxp_mult(&ep->desc);
+		return psize * mult;
+	case USB_SPEED_WIRELESS:
+		psize = usb_endpoint_maxp(&ep->desc);
+		return psize;
+	default:
+		psize = usb_endpoint_maxp(&ep->desc);
+		return psize;
+	}
+}
+
+/*
+ * Initialize isochronous URBs and allocate transfer buffers. The packet size
+ * is given by the endpoint.
+ */
+static int uvc_init_video_isoc(struct uvc_streaming *stream,
+	struct usb_host_endpoint *ep, gfp_t gfp_flags)
+{
+	struct urb *urb;
+	struct uvc_urb *uvc_urb;
+	unsigned int npackets, i;
+	u16 psize;
+	u32 size;
+
+	psize = uvc_endpoint_max_bpi(stream->dev->udev, ep);
+	size = stream->ctrl.dwMaxVideoFrameSize;
+
+	npackets = uvc_alloc_urb_buffers(stream, size, psize, gfp_flags);
+	if (npackets == 0)
+		return -ENOMEM;
+
+	size = npackets * psize;
+
+	for_each_uvc_urb(uvc_urb, stream) {
+		urb = usb_alloc_urb(npackets, gfp_flags);
+		if (urb == NULL) {
+			uvc_video_stop_transfer(stream, 1);
+			return -ENOMEM;
+		}
+
+		urb->dev = stream->dev->udev;
+		urb->context = uvc_urb;
+		urb->pipe = usb_rcvisocpipe(stream->dev->udev,
+				ep->desc.bEndpointAddress);
+#ifndef CONFIG_DMA_NONCOHERENT
+		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+		urb->transfer_dma = uvc_urb->dma;
+#else
+		urb->transfer_flags = URB_ISO_ASAP;
+#endif
+		urb->interval = ep->desc.bInterval;
+		urb->transfer_buffer = uvc_urb->buffer;
+		urb->complete = uvc_video_complete;
+		urb->number_of_packets = npackets;
+		urb->transfer_buffer_length = size;
+
+		for (i = 0; i < npackets; ++i) {
+			urb->iso_frame_desc[i].offset = i * psize;
+			urb->iso_frame_desc[i].length = psize;
+		}
+
+		uvc_urb->urb = urb;
+	}
+
+	return 0;
+}
+
+/*
+ * Initialize bulk URBs and allocate transfer buffers. The packet size is
+ * given by the endpoint.
+ */
+static int uvc_init_video_bulk(struct uvc_streaming *stream,
+	struct usb_host_endpoint *ep, gfp_t gfp_flags)
+{
+	struct urb *urb;
+	struct uvc_urb *uvc_urb;
+	unsigned int npackets, pipe;
+	u16 psize;
+	u32 size;
+
+	psize = usb_endpoint_maxp(&ep->desc);
+	size = stream->ctrl.dwMaxPayloadTransferSize;
+	stream->bulk.max_payload_size = size;
+
+	npackets = uvc_alloc_urb_buffers(stream, size, psize, gfp_flags);
+	if (npackets == 0)
+		return -ENOMEM;
+
+	size = npackets * psize;
+
+	if (usb_endpoint_dir_in(&ep->desc))
+		pipe = usb_rcvbulkpipe(stream->dev->udev,
+				       ep->desc.bEndpointAddress);
+	else
+		pipe = usb_sndbulkpipe(stream->dev->udev,
+				       ep->desc.bEndpointAddress);
+
+	if (stream->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
+		size = 0;
+
+	for_each_uvc_urb(uvc_urb, stream) {
+		urb = usb_alloc_urb(0, gfp_flags);
+		if (urb == NULL) {
+			uvc_video_stop_transfer(stream, 1);
+			return -ENOMEM;
+		}
+
+		usb_fill_bulk_urb(urb, stream->dev->udev, pipe,	uvc_urb->buffer,
+				  size, uvc_video_complete, uvc_urb);
+#ifndef CONFIG_DMA_NONCOHERENT
+		urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+		urb->transfer_dma = uvc_urb->dma;
+#endif
+
+		uvc_urb->urb = urb;
+	}
+
+	return 0;
+}
+
+/*
+ * Initialize isochronous/bulk URBs and allocate transfer buffers.
+ */
+static int uvc_video_start_transfer(struct uvc_streaming *stream,
+				    gfp_t gfp_flags)
+{
+	struct usb_interface *intf = stream->intf;
+	struct usb_host_endpoint *ep;
+	struct uvc_urb *uvc_urb;
+	unsigned int i;
+	int ret;
+
+	stream->sequence = -1;
+	stream->last_fid = -1;
+	stream->bulk.header_size = 0;
+	stream->bulk.skip_payload = 0;
+	stream->bulk.payload_size = 0;
+
+	uvc_video_stats_start(stream);
+
+	if (intf->num_altsetting > 1) {
+		struct usb_host_endpoint *best_ep = NULL;
+		unsigned int best_psize = UINT_MAX;
+		unsigned int bandwidth;
+		unsigned int altsetting;
+		int intfnum = stream->intfnum;
+
+		/* Isochronous endpoint, select the alternate setting. */
+		bandwidth = stream->ctrl.dwMaxPayloadTransferSize;
+
+		if (bandwidth == 0) {
+			uvc_trace(UVC_TRACE_VIDEO, "Device requested null "
+				"bandwidth, defaulting to lowest.\n");
+			bandwidth = 1;
+		} else {
+			uvc_trace(UVC_TRACE_VIDEO, "Device requested %u "
+				"B/frame bandwidth.\n", bandwidth);
+		}
+
+		for (i = 0; i < intf->num_altsetting; ++i) {
+			struct usb_host_interface *alts;
+			unsigned int psize;
+
+			alts = &intf->altsetting[i];
+			ep = uvc_find_endpoint(alts,
+				stream->header.bEndpointAddress);
+			if (ep == NULL)
+				continue;
+
+			/* Check if the bandwidth is high enough. */
+			psize = uvc_endpoint_max_bpi(stream->dev->udev, ep);
+			if (psize >= bandwidth && psize <= best_psize) {
+				altsetting = alts->desc.bAlternateSetting;
+				best_psize = psize;
+				best_ep = ep;
+			}
+		}
+
+		if (best_ep == NULL) {
+			uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting "
+				"for requested bandwidth.\n");
+			return -EIO;
+		}
+
+		uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u "
+			"(%u B/frame bandwidth).\n", altsetting, best_psize);
+
+		/*
+		 * Some devices, namely the Logitech C910 and B910, are unable
+		 * to recover from a USB autosuspend, unless the alternate
+		 * setting of the streaming interface is toggled.
+		 */
+		if (stream->dev->quirks & UVC_QUIRK_WAKE_AUTOSUSPEND) {
+			usb_set_interface(stream->dev->udev, intfnum,
+					  altsetting);
+			usb_set_interface(stream->dev->udev, intfnum, 0);
+		}
+
+		ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
+		if (ret < 0)
+			return ret;
+
+		ret = uvc_init_video_isoc(stream, best_ep, gfp_flags);
+	} else {
+		/* Bulk endpoint, proceed to URB initialization. */
+		ep = uvc_find_endpoint(&intf->altsetting[0],
+				stream->header.bEndpointAddress);
+		if (ep == NULL)
+			return -EIO;
+
+		/* Reject broken descriptors. */
+		if (usb_endpoint_maxp(&ep->desc) == 0)
+			return -EIO;
+
+		ret = uvc_init_video_bulk(stream, ep, gfp_flags);
+	}
+
+	if (ret < 0)
+		return ret;
+
+	/* Submit the URBs. */
+	for_each_uvc_urb(uvc_urb, stream) {
+		ret = usb_submit_urb(uvc_urb->urb, gfp_flags);
+		if (ret < 0) {
+			uvc_printk(KERN_ERR, "Failed to submit URB %u (%d).\n",
+				   uvc_urb_index(uvc_urb), ret);
+			uvc_video_stop_transfer(stream, 1);
+			return ret;
+		}
+	}
+
+	/* The Logitech C920 temporarily forgets that it should not be adjusting
+	 * Exposure Absolute during init so restore controls to stored values.
+	 */
+	if (stream->dev->quirks & UVC_QUIRK_RESTORE_CTRLS_ON_INIT)
+		uvc_ctrl_restore_values(stream->dev);
+
+	return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * Suspend/resume
+ */
+
+/*
+ * Stop streaming without disabling the video queue.
+ *
+ * To let userspace applications resume without trouble, we must not touch the
+ * video buffers in any way. We mark the device as frozen to make sure the URB
+ * completion handler won't try to cancel the queue when we kill the URBs.
+ */
+int uvc_video_suspend(struct uvc_streaming *stream)
+{
+	if (!uvc_queue_streaming(&stream->queue))
+		return 0;
+
+	stream->frozen = 1;
+	uvc_video_stop_transfer(stream, 0);
+	usb_set_interface(stream->dev->udev, stream->intfnum, 0);
+	return 0;
+}
+
+/*
+ * Reconfigure the video interface and restart streaming if it was enabled
+ * before suspend.
+ *
+ * If an error occurs, disable the video queue. This will wake all pending
+ * buffers, making sure userspace applications are notified of the problem
+ * instead of waiting forever.
+ */
+int uvc_video_resume(struct uvc_streaming *stream, int reset)
+{
+	int ret;
+
+	/* If the bus has been reset on resume, set the alternate setting to 0.
+	 * This should be the default value, but some devices crash or otherwise
+	 * misbehave if they don't receive a SET_INTERFACE request before any
+	 * other video control request.
+	 */
+	if (reset)
+		usb_set_interface(stream->dev->udev, stream->intfnum, 0);
+
+	stream->frozen = 0;
+
+	uvc_video_clock_reset(stream);
+
+	if (!uvc_queue_streaming(&stream->queue))
+		return 0;
+
+	ret = uvc_commit_video(stream, &stream->ctrl);
+	if (ret < 0)
+		return ret;
+
+	return uvc_video_start_transfer(stream, GFP_NOIO);
+}
+
+/* ------------------------------------------------------------------------
+ * Video device
+ */
+
+/*
+ * Initialize the UVC video device by switching to alternate setting 0 and
+ * retrieve the default format.
+ *
+ * Some cameras (namely the Fuji Finepix) set the format and frame
+ * indexes to zero. The UVC standard doesn't clearly make this a spec
+ * violation, so try to silently fix the values if possible.
+ *
+ * This function is called before registering the device with V4L.
+ */
+int uvc_video_init(struct uvc_streaming *stream)
+{
+	struct uvc_streaming_control *probe = &stream->ctrl;
+	struct uvc_format *format = NULL;
+	struct uvc_frame *frame = NULL;
+	struct uvc_urb *uvc_urb;
+	unsigned int i;
+	int ret;
+
+	if (stream->nformats == 0) {
+		uvc_printk(KERN_INFO, "No supported video formats found.\n");
+		return -EINVAL;
+	}
+
+	atomic_set(&stream->active, 0);
+
+	/* Alternate setting 0 should be the default, yet the XBox Live Vision
+	 * Cam (and possibly other devices) crash or otherwise misbehave if
+	 * they don't receive a SET_INTERFACE request before any other video
+	 * control request.
+	 */
+	usb_set_interface(stream->dev->udev, stream->intfnum, 0);
+
+	/* Set the streaming probe control with default streaming parameters
+	 * retrieved from the device. Webcams that don't support GET_DEF
+	 * requests on the probe control will just keep their current streaming
+	 * parameters.
+	 */
+	if (uvc_get_video_ctrl(stream, probe, 1, UVC_GET_DEF) == 0)
+		uvc_set_video_ctrl(stream, probe, 1);
+
+	/* Initialize the streaming parameters with the probe control current
+	 * value. This makes sure SET_CUR requests on the streaming commit
+	 * control will always use values retrieved from a successful GET_CUR
+	 * request on the probe control, as required by the UVC specification.
+	 */
+	ret = uvc_get_video_ctrl(stream, probe, 1, UVC_GET_CUR);
+	if (ret < 0)
+		return ret;
+
+	/* Check if the default format descriptor exists. Use the first
+	 * available format otherwise.
+	 */
+	for (i = stream->nformats; i > 0; --i) {
+		format = &stream->format[i-1];
+		if (format->index == probe->bFormatIndex)
+			break;
+	}
+
+	if (format->nframes == 0) {
+		uvc_printk(KERN_INFO, "No frame descriptor found for the "
+			"default format.\n");
+		return -EINVAL;
+	}
+
+	/* Zero bFrameIndex might be correct. Stream-based formats (including
+	 * MPEG-2 TS and DV) do not support frames but have a dummy frame
+	 * descriptor with bFrameIndex set to zero. If the default frame
+	 * descriptor is not found, use the first available frame.
+	 */
+	for (i = format->nframes; i > 0; --i) {
+		frame = &format->frame[i-1];
+		if (frame->bFrameIndex == probe->bFrameIndex)
+			break;
+	}
+
+	probe->bFormatIndex = format->index;
+	probe->bFrameIndex = frame->bFrameIndex;
+
+	stream->def_format = format;
+	stream->cur_format = format;
+	stream->cur_frame = frame;
+
+	/* Select the video decoding function */
+	if (stream->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		if (stream->dev->quirks & UVC_QUIRK_BUILTIN_ISIGHT)
+			stream->decode = uvc_video_decode_isight;
+		else if (stream->intf->num_altsetting > 1)
+			stream->decode = uvc_video_decode_isoc;
+		else
+			stream->decode = uvc_video_decode_bulk;
+	} else {
+		if (stream->intf->num_altsetting == 1)
+			stream->decode = uvc_video_encode_bulk;
+		else {
+			uvc_printk(KERN_INFO, "Isochronous endpoints are not "
+				"supported for video output devices.\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Prepare asynchronous work items. */
+	for_each_uvc_urb(uvc_urb, stream)
+		INIT_WORK(&uvc_urb->work, uvc_video_copy_data_work);
+
+	return 0;
+}
+
+int uvc_video_start_streaming(struct uvc_streaming *stream)
+{
+	int ret;
+
+	ret = uvc_video_clock_init(stream);
+	if (ret < 0)
+		return ret;
+
+	/* Commit the streaming parameters. */
+	ret = uvc_commit_video(stream, &stream->ctrl);
+	if (ret < 0)
+		goto error_commit;
+
+	ret = uvc_video_start_transfer(stream, GFP_KERNEL);
+	if (ret < 0)
+		goto error_video;
+
+	return 0;
+
+error_video:
+	usb_set_interface(stream->dev->udev, stream->intfnum, 0);
+error_commit:
+	uvc_video_clock_cleanup(stream);
+
+	return ret;
+}
+
+void uvc_video_stop_streaming(struct uvc_streaming *stream)
+{
+	uvc_video_stop_transfer(stream, 1);
+
+	if (stream->intf->num_altsetting > 1) {
+		usb_set_interface(stream->dev->udev, stream->intfnum, 0);
+	} else {
+		/* UVC doesn't specify how to inform a bulk-based device
+		 * when the video stream is stopped. Windows sends a
+		 * CLEAR_FEATURE(HALT) request to the video streaming
+		 * bulk endpoint, mimic the same behaviour.
+		 */
+		unsigned int epnum = stream->header.bEndpointAddress
+				   & USB_ENDPOINT_NUMBER_MASK;
+		unsigned int dir = stream->header.bEndpointAddress
+				 & USB_ENDPOINT_DIR_MASK;
+		unsigned int pipe;
+
+		pipe = usb_sndbulkpipe(stream->dev->udev, epnum) | dir;
+		usb_clear_halt(stream->dev->udev, pipe);
+	}
+
+	uvc_video_clock_cleanup(stream);
+}