summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
commit5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch)
treea94efe259b9009378be6d90eb30d2b019d95c194 /drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
parentInitial commit. (diff)
downloadlinux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz
linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip
Adding upstream version 5.10.209.upstream/5.10.209
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/mtd/nand/raw/ingenic/jz4725b_bch.c')
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4725b_bch.c295
1 files changed, 295 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
new file mode 100644
index 000000000..2d0e0a219
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4725B BCH controller driver
+ *
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ *
+ * Based on jz4780_bch.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define BCH_BHCR 0x0
+#define BCH_BHCSR 0x4
+#define BCH_BHCCR 0x8
+#define BCH_BHCNT 0xc
+#define BCH_BHDR 0x10
+#define BCH_BHPAR0 0x14
+#define BCH_BHERR0 0x28
+#define BCH_BHINT 0x24
+#define BCH_BHINTES 0x3c
+#define BCH_BHINTEC 0x40
+#define BCH_BHINTE 0x38
+
+#define BCH_BHCR_ENCE BIT(3)
+#define BCH_BHCR_BSEL BIT(2)
+#define BCH_BHCR_INIT BIT(1)
+#define BCH_BHCR_BCHE BIT(0)
+
+#define BCH_BHCNT_DEC_COUNT_SHIFT 16
+#define BCH_BHCNT_DEC_COUNT_MASK (0x3ff << BCH_BHCNT_DEC_COUNT_SHIFT)
+#define BCH_BHCNT_ENC_COUNT_SHIFT 0
+#define BCH_BHCNT_ENC_COUNT_MASK (0x3ff << BCH_BHCNT_ENC_COUNT_SHIFT)
+
+#define BCH_BHERR_INDEX0_SHIFT 0
+#define BCH_BHERR_INDEX0_MASK (0x1fff << BCH_BHERR_INDEX0_SHIFT)
+#define BCH_BHERR_INDEX1_SHIFT 16
+#define BCH_BHERR_INDEX1_MASK (0x1fff << BCH_BHERR_INDEX1_SHIFT)
+
+#define BCH_BHINT_ERRC_SHIFT 28
+#define BCH_BHINT_ERRC_MASK (0xf << BCH_BHINT_ERRC_SHIFT)
+#define BCH_BHINT_TERRC_SHIFT 16
+#define BCH_BHINT_TERRC_MASK (0x7f << BCH_BHINT_TERRC_SHIFT)
+#define BCH_BHINT_ALL_0 BIT(5)
+#define BCH_BHINT_ALL_F BIT(4)
+#define BCH_BHINT_DECF BIT(3)
+#define BCH_BHINT_ENCF BIT(2)
+#define BCH_BHINT_UNCOR BIT(1)
+#define BCH_BHINT_ERR BIT(0)
+
+/* Timeout for BCH calculation/correction. */
+#define BCH_TIMEOUT_US 100000
+
+static inline void jz4725b_bch_config_set(struct ingenic_ecc *bch, u32 cfg)
+{
+ writel(cfg, bch->base + BCH_BHCSR);
+}
+
+static inline void jz4725b_bch_config_clear(struct ingenic_ecc *bch, u32 cfg)
+{
+ writel(cfg, bch->base + BCH_BHCCR);
+}
+
+static int jz4725b_bch_reset(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params, bool calc_ecc)
+{
+ u32 reg, max_value;
+
+ /* Clear interrupt status. */
+ writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+ /* Initialise and enable BCH. */
+ jz4725b_bch_config_clear(bch, 0x1f);
+ jz4725b_bch_config_set(bch, BCH_BHCR_BCHE);
+
+ if (params->strength == 8)
+ jz4725b_bch_config_set(bch, BCH_BHCR_BSEL);
+ else
+ jz4725b_bch_config_clear(bch, BCH_BHCR_BSEL);
+
+ if (calc_ecc) /* calculate ECC from data */
+ jz4725b_bch_config_set(bch, BCH_BHCR_ENCE);
+ else /* correct data from ECC */
+ jz4725b_bch_config_clear(bch, BCH_BHCR_ENCE);
+
+ jz4725b_bch_config_set(bch, BCH_BHCR_INIT);
+
+ max_value = BCH_BHCNT_ENC_COUNT_MASK >> BCH_BHCNT_ENC_COUNT_SHIFT;
+ if (params->size > max_value)
+ return -EINVAL;
+
+ max_value = BCH_BHCNT_DEC_COUNT_MASK >> BCH_BHCNT_DEC_COUNT_SHIFT;
+ if (params->size + params->bytes > max_value)
+ return -EINVAL;
+
+ /* Set up BCH count register. */
+ reg = params->size << BCH_BHCNT_ENC_COUNT_SHIFT;
+ reg |= (params->size + params->bytes) << BCH_BHCNT_DEC_COUNT_SHIFT;
+ writel(reg, bch->base + BCH_BHCNT);
+
+ return 0;
+}
+
+static void jz4725b_bch_disable(struct ingenic_ecc *bch)
+{
+ /* Clear interrupts */
+ writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+ /* Disable the hardware */
+ jz4725b_bch_config_clear(bch, BCH_BHCR_BCHE);
+}
+
+static void jz4725b_bch_write_data(struct ingenic_ecc *bch, const u8 *buf,
+ size_t size)
+{
+ while (size--)
+ writeb(*buf++, bch->base + BCH_BHDR);
+}
+
+static void jz4725b_bch_read_parity(struct ingenic_ecc *bch, u8 *buf,
+ size_t size)
+{
+ size_t size32 = size / sizeof(u32);
+ size_t size8 = size % sizeof(u32);
+ u32 *dest32;
+ u8 *dest8;
+ u32 val, offset = 0;
+
+ dest32 = (u32 *)buf;
+ while (size32--) {
+ *dest32++ = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
+ offset += sizeof(u32);
+ }
+
+ dest8 = (u8 *)dest32;
+ val = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
+ switch (size8) {
+ case 3:
+ dest8[2] = (val >> 16) & 0xff;
+ fallthrough;
+ case 2:
+ dest8[1] = (val >> 8) & 0xff;
+ fallthrough;
+ case 1:
+ dest8[0] = val & 0xff;
+ break;
+ }
+}
+
+static int jz4725b_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
+ u32 *status)
+{
+ u32 reg;
+ int ret;
+
+ /*
+ * While we could use interrupts here and sleep until the operation
+ * completes, the controller works fairly quickly (usually a few
+ * microseconds) and so the overhead of sleeping until we get an
+ * interrupt quite noticeably decreases performance.
+ */
+ ret = readl_relaxed_poll_timeout(bch->base + BCH_BHINT, reg,
+ reg & irq, 0, BCH_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ if (status)
+ *status = reg;
+
+ writel(reg, bch->base + BCH_BHINT);
+
+ return 0;
+}
+
+static int jz4725b_calculate(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ int ret;
+
+ mutex_lock(&bch->lock);
+
+ ret = jz4725b_bch_reset(bch, params, true);
+ if (ret) {
+ dev_err(bch->dev, "Unable to init BCH with given parameters\n");
+ goto out_disable;
+ }
+
+ jz4725b_bch_write_data(bch, buf, params->size);
+
+ ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL);
+ if (ret) {
+ dev_err(bch->dev, "timed out while calculating ECC\n");
+ goto out_disable;
+ }
+
+ jz4725b_bch_read_parity(bch, ecc_code, params->bytes);
+
+out_disable:
+ jz4725b_bch_disable(bch);
+ mutex_unlock(&bch->lock);
+
+ return ret;
+}
+
+static int jz4725b_correct(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code)
+{
+ u32 reg, errors, bit;
+ unsigned int i;
+ int ret;
+
+ mutex_lock(&bch->lock);
+
+ ret = jz4725b_bch_reset(bch, params, false);
+ if (ret) {
+ dev_err(bch->dev, "Unable to init BCH with given parameters\n");
+ goto out;
+ }
+
+ jz4725b_bch_write_data(bch, buf, params->size);
+ jz4725b_bch_write_data(bch, ecc_code, params->bytes);
+
+ ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_DECF, &reg);
+ if (ret) {
+ dev_err(bch->dev, "timed out while correcting data\n");
+ goto out;
+ }
+
+ if (reg & (BCH_BHINT_ALL_F | BCH_BHINT_ALL_0)) {
+ /* Data and ECC is all 0xff or 0x00 - nothing to correct */
+ ret = 0;
+ goto out;
+ }
+
+ if (reg & BCH_BHINT_UNCOR) {
+ /* Uncorrectable ECC error */
+ ret = -EBADMSG;
+ goto out;
+ }
+
+ errors = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
+
+ /* Correct any detected errors. */
+ for (i = 0; i < errors; i++) {
+ if (i & 1) {
+ bit = (reg & BCH_BHERR_INDEX1_MASK) >> BCH_BHERR_INDEX1_SHIFT;
+ } else {
+ reg = readl(bch->base + BCH_BHERR0 + (i * 4));
+ bit = (reg & BCH_BHERR_INDEX0_MASK) >> BCH_BHERR_INDEX0_SHIFT;
+ }
+
+ buf[(bit >> 3)] ^= BIT(bit & 0x7);
+ }
+
+out:
+ jz4725b_bch_disable(bch);
+ mutex_unlock(&bch->lock);
+
+ return ret;
+}
+
+static const struct ingenic_ecc_ops jz4725b_bch_ops = {
+ .disable = jz4725b_bch_disable,
+ .calculate = jz4725b_calculate,
+ .correct = jz4725b_correct,
+};
+
+static const struct of_device_id jz4725b_bch_dt_match[] = {
+ { .compatible = "ingenic,jz4725b-bch", .data = &jz4725b_bch_ops },
+ {},
+};
+MODULE_DEVICE_TABLE(of, jz4725b_bch_dt_match);
+
+static struct platform_driver jz4725b_bch_driver = {
+ .probe = ingenic_ecc_probe,
+ .driver = {
+ .name = "jz4725b-bch",
+ .of_match_table = jz4725b_bch_dt_match,
+ },
+};
+module_platform_driver(jz4725b_bch_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4725B BCH controller driver");
+MODULE_LICENSE("GPL v2");