Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 491 insertions, 0 deletions

diff --git a/drivers/net/ethernet/sfc/falcon/tenxpress.c b/drivers/net/ethernet/sfc/falcon/tenxpress.c
new file mode 100644
index 000000000..e27824ef1
--- /dev/null
+++ b/drivers/net/ethernet/sfc/falcon/tenxpress.c
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/****************************************************************************
+ * Driver for Solarflare network controllers and boards
+ * Copyright 2007-2011 Solarflare Communications Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/rtnetlink.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include "efx.h"
+#include "mdio_10g.h"
+#include "nic.h"
+#include "phy.h"
+#include "workarounds.h"
+
+/* We expect these MMDs to be in the package. */
+#define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD	| \
+				 MDIO_DEVS_PCS		| \
+				 MDIO_DEVS_PHYXS	| \
+				 MDIO_DEVS_AN)
+
+#define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) |	\
+			   (1 << LOOPBACK_PCS) |	\
+			   (1 << LOOPBACK_PMAPMD) |	\
+			   (1 << LOOPBACK_PHYXS_WS))
+
+/* We complain if we fail to see the link partner as 10G capable this many
+ * times in a row (must be > 1 as sampling the autoneg. registers is racy)
+ */
+#define MAX_BAD_LP_TRIES	(5)
+
+/* Extended control register */
+#define PMA_PMD_XCONTROL_REG	49152
+#define PMA_PMD_EXT_GMII_EN_LBN	1
+#define PMA_PMD_EXT_GMII_EN_WIDTH 1
+#define PMA_PMD_EXT_CLK_OUT_LBN	2
+#define PMA_PMD_EXT_CLK_OUT_WIDTH 1
+#define PMA_PMD_LNPGA_POWERDOWN_LBN 8
+#define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1
+#define PMA_PMD_EXT_CLK312_WIDTH 1
+#define PMA_PMD_EXT_LPOWER_LBN  12
+#define PMA_PMD_EXT_LPOWER_WIDTH 1
+#define PMA_PMD_EXT_ROBUST_LBN	14
+#define PMA_PMD_EXT_ROBUST_WIDTH 1
+#define PMA_PMD_EXT_SSR_LBN	15
+#define PMA_PMD_EXT_SSR_WIDTH	1
+
+/* extended status register */
+#define PMA_PMD_XSTATUS_REG	49153
+#define PMA_PMD_XSTAT_MDIX_LBN	14
+#define PMA_PMD_XSTAT_FLP_LBN   (12)
+
+/* LED control register */
+#define PMA_PMD_LED_CTRL_REG	49159
+#define PMA_PMA_LED_ACTIVITY_LBN	(3)
+
+/* LED function override register */
+#define PMA_PMD_LED_OVERR_REG	49161
+/* Bit positions for different LEDs (there are more but not wired on SFE4001)*/
+#define PMA_PMD_LED_LINK_LBN	(0)
+#define PMA_PMD_LED_SPEED_LBN	(2)
+#define PMA_PMD_LED_TX_LBN	(4)
+#define PMA_PMD_LED_RX_LBN	(6)
+/* Override settings */
+#define	PMA_PMD_LED_AUTO	(0)	/* H/W control */
+#define	PMA_PMD_LED_ON		(1)
+#define	PMA_PMD_LED_OFF		(2)
+#define PMA_PMD_LED_FLASH	(3)
+#define PMA_PMD_LED_MASK	3
+/* All LEDs under hardware control */
+/* Green and Amber under hardware control, Red off */
+#define SFX7101_PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)
+
+#define PMA_PMD_SPEED_ENABLE_REG 49192
+#define PMA_PMD_100TX_ADV_LBN    1
+#define PMA_PMD_100TX_ADV_WIDTH  1
+#define PMA_PMD_1000T_ADV_LBN    2
+#define PMA_PMD_1000T_ADV_WIDTH  1
+#define PMA_PMD_10000T_ADV_LBN   3
+#define PMA_PMD_10000T_ADV_WIDTH 1
+#define PMA_PMD_SPEED_LBN        4
+#define PMA_PMD_SPEED_WIDTH      4
+
+/* Misc register defines */
+#define PCS_CLOCK_CTRL_REG	55297
+#define PLL312_RST_N_LBN 2
+
+#define PCS_SOFT_RST2_REG	55302
+#define SERDES_RST_N_LBN 13
+#define XGXS_RST_N_LBN 12
+
+#define	PCS_TEST_SELECT_REG	55303	/* PRM 10.5.8 */
+#define	CLK312_EN_LBN 3
+
+/* PHYXS registers */
+#define PHYXS_XCONTROL_REG	49152
+#define PHYXS_RESET_LBN		15
+#define PHYXS_RESET_WIDTH	1
+
+#define PHYXS_TEST1         (49162)
+#define LOOPBACK_NEAR_LBN   (8)
+#define LOOPBACK_NEAR_WIDTH (1)
+
+/* Boot status register */
+#define PCS_BOOT_STATUS_REG		53248
+#define PCS_BOOT_FATAL_ERROR_LBN	0
+#define PCS_BOOT_PROGRESS_LBN		1
+#define PCS_BOOT_PROGRESS_WIDTH		2
+#define PCS_BOOT_PROGRESS_INIT		0
+#define PCS_BOOT_PROGRESS_WAIT_MDIO	1
+#define PCS_BOOT_PROGRESS_CHECKSUM	2
+#define PCS_BOOT_PROGRESS_JUMP		3
+#define PCS_BOOT_DOWNLOAD_WAIT_LBN	3
+#define PCS_BOOT_CODE_STARTED_LBN	4
+
+/* 100M/1G PHY registers */
+#define GPHY_XCONTROL_REG	49152
+#define GPHY_ISOLATE_LBN	10
+#define GPHY_ISOLATE_WIDTH	1
+#define GPHY_DUPLEX_LBN		8
+#define GPHY_DUPLEX_WIDTH	1
+#define GPHY_LOOPBACK_NEAR_LBN	14
+#define GPHY_LOOPBACK_NEAR_WIDTH 1
+
+#define C22EXT_STATUS_REG       49153
+#define C22EXT_STATUS_LINK_LBN  2
+#define C22EXT_STATUS_LINK_WIDTH 1
+
+#define C22EXT_MSTSLV_CTRL			49161
+#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN	8
+#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN	9
+
+#define C22EXT_MSTSLV_STATUS			49162
+#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN	10
+#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN	11
+
+/* Time to wait between powering down the LNPGA and turning off the power
+ * rails */
+#define LNPGA_PDOWN_WAIT	(HZ / 5)
+
+struct tenxpress_phy_data {
+	enum ef4_loopback_mode loopback_mode;
+	enum ef4_phy_mode phy_mode;
+	int bad_lp_tries;
+};
+
+static int tenxpress_init(struct ef4_nic *efx)
+{
+	/* Enable 312.5 MHz clock */
+	ef4_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
+		       1 << CLK312_EN_LBN);
+
+	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
+	ef4_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG,
+			  1 << PMA_PMA_LED_ACTIVITY_LBN, true);
+	ef4_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG,
+		       SFX7101_PMA_PMD_LED_DEFAULT);
+
+	return 0;
+}
+
+static int tenxpress_phy_probe(struct ef4_nic *efx)
+{
+	struct tenxpress_phy_data *phy_data;
+
+	/* Allocate phy private storage */
+	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+	if (!phy_data)
+		return -ENOMEM;
+	efx->phy_data = phy_data;
+	phy_data->phy_mode = efx->phy_mode;
+
+	efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
+	efx->mdio.mode_support = MDIO_SUPPORTS_C45;
+
+	efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
+
+	efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
+				 ADVERTISED_10000baseT_Full);
+
+	return 0;
+}
+
+static int tenxpress_phy_init(struct ef4_nic *efx)
+{
+	int rc;
+
+	falcon_board(efx)->type->init_phy(efx);
+
+	if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
+		rc = ef4_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
+		if (rc < 0)
+			return rc;
+
+		rc = ef4_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS);
+		if (rc < 0)
+			return rc;
+	}
+
+	rc = tenxpress_init(efx);
+	if (rc < 0)
+		return rc;
+
+	/* Reinitialise flow control settings */
+	ef4_link_set_wanted_fc(efx, efx->wanted_fc);
+	ef4_mdio_an_reconfigure(efx);
+
+	schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
+
+	/* Let XGXS and SerDes out of reset */
+	falcon_reset_xaui(efx);
+
+	return 0;
+}
+
+/* Perform a "special software reset" on the PHY. The caller is
+ * responsible for saving and restoring the PHY hardware registers
+ * properly, and masking/unmasking LASI */
+static int tenxpress_special_reset(struct ef4_nic *efx)
+{
+	int rc, reg;
+
+	/* The XGMAC clock is driven from the SFX7101 312MHz clock, so
+	 * a special software reset can glitch the XGMAC sufficiently for stats
+	 * requests to fail. */
+	falcon_stop_nic_stats(efx);
+
+	/* Initiate reset */
+	reg = ef4_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
+	reg |= (1 << PMA_PMD_EXT_SSR_LBN);
+	ef4_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
+
+	mdelay(200);
+
+	/* Wait for the blocks to come out of reset */
+	rc = ef4_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
+	if (rc < 0)
+		goto out;
+
+	/* Try and reconfigure the device */
+	rc = tenxpress_init(efx);
+	if (rc < 0)
+		goto out;
+
+	/* Wait for the XGXS state machine to churn */
+	mdelay(10);
+out:
+	falcon_start_nic_stats(efx);
+	return rc;
+}
+
+static void sfx7101_check_bad_lp(struct ef4_nic *efx, bool link_ok)
+{
+	struct tenxpress_phy_data *pd = efx->phy_data;
+	bool bad_lp;
+	int reg;
+
+	if (link_ok) {
+		bad_lp = false;
+	} else {
+		/* Check that AN has started but not completed. */
+		reg = ef4_mdio_read(efx, MDIO_MMD_AN, MDIO_STAT1);
+		if (!(reg & MDIO_AN_STAT1_LPABLE))
+			return; /* LP status is unknown */
+		bad_lp = !(reg & MDIO_AN_STAT1_COMPLETE);
+		if (bad_lp)
+			pd->bad_lp_tries++;
+	}
+
+	/* Nothing to do if all is well and was previously so. */
+	if (!pd->bad_lp_tries)
+		return;
+
+	/* Use the RX (red) LED as an error indicator once we've seen AN
+	 * failure several times in a row, and also log a message. */
+	if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) {
+		reg = ef4_mdio_read(efx, MDIO_MMD_PMAPMD,
+				    PMA_PMD_LED_OVERR_REG);
+		reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN);
+		if (!bad_lp) {
+			reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN;
+		} else {
+			reg |= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN;
+			netif_err(efx, link, efx->net_dev,
+				  "appears to be plugged into a port"
+				  " that is not 10GBASE-T capable. The PHY"
+				  " supports 10GBASE-T ONLY, so no link can"
+				  " be established\n");
+		}
+		ef4_mdio_write(efx, MDIO_MMD_PMAPMD,
+			       PMA_PMD_LED_OVERR_REG, reg);
+		pd->bad_lp_tries = bad_lp;
+	}
+}
+
+static bool sfx7101_link_ok(struct ef4_nic *efx)
+{
+	return ef4_mdio_links_ok(efx,
+				 MDIO_DEVS_PMAPMD |
+				 MDIO_DEVS_PCS |
+				 MDIO_DEVS_PHYXS);
+}
+
+static void tenxpress_ext_loopback(struct ef4_nic *efx)
+{
+	ef4_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1,
+			  1 << LOOPBACK_NEAR_LBN,
+			  efx->loopback_mode == LOOPBACK_PHYXS);
+}
+
+static void tenxpress_low_power(struct ef4_nic *efx)
+{
+	ef4_mdio_set_mmds_lpower(
+		efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER),
+		TENXPRESS_REQUIRED_DEVS);
+}
+
+static int tenxpress_phy_reconfigure(struct ef4_nic *efx)
+{
+	struct tenxpress_phy_data *phy_data = efx->phy_data;
+	bool phy_mode_change, loop_reset;
+
+	if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
+		phy_data->phy_mode = efx->phy_mode;
+		return 0;
+	}
+
+	phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
+			   phy_data->phy_mode != PHY_MODE_NORMAL);
+	loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, LOOPBACKS_EXTERNAL(efx)) ||
+		      LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
+
+	if (loop_reset || phy_mode_change) {
+		tenxpress_special_reset(efx);
+		falcon_reset_xaui(efx);
+	}
+
+	tenxpress_low_power(efx);
+	ef4_mdio_transmit_disable(efx);
+	ef4_mdio_phy_reconfigure(efx);
+	tenxpress_ext_loopback(efx);
+	ef4_mdio_an_reconfigure(efx);
+
+	phy_data->loopback_mode = efx->loopback_mode;
+	phy_data->phy_mode = efx->phy_mode;
+
+	return 0;
+}
+
+/* Poll for link state changes */
+static bool tenxpress_phy_poll(struct ef4_nic *efx)
+{
+	struct ef4_link_state old_state = efx->link_state;
+
+	efx->link_state.up = sfx7101_link_ok(efx);
+	efx->link_state.speed = 10000;
+	efx->link_state.fd = true;
+	efx->link_state.fc = ef4_mdio_get_pause(efx);
+
+	sfx7101_check_bad_lp(efx, efx->link_state.up);
+
+	return !ef4_link_state_equal(&efx->link_state, &old_state);
+}
+
+static void sfx7101_phy_fini(struct ef4_nic *efx)
+{
+	int reg;
+
+	/* Power down the LNPGA */
+	reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
+	ef4_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
+
+	/* Waiting here ensures that the board fini, which can turn
+	 * off the power to the PHY, won't get run until the LNPGA
+	 * powerdown has been given long enough to complete. */
+	schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
+}
+
+static void tenxpress_phy_remove(struct ef4_nic *efx)
+{
+	kfree(efx->phy_data);
+	efx->phy_data = NULL;
+}
+
+
+/* Override the RX, TX and link LEDs */
+void tenxpress_set_id_led(struct ef4_nic *efx, enum ef4_led_mode mode)
+{
+	int reg;
+
+	switch (mode) {
+	case EF4_LED_OFF:
+		reg = (PMA_PMD_LED_OFF << PMA_PMD_LED_TX_LBN) |
+			(PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) |
+			(PMA_PMD_LED_OFF << PMA_PMD_LED_LINK_LBN);
+		break;
+	case EF4_LED_ON:
+		reg = (PMA_PMD_LED_ON << PMA_PMD_LED_TX_LBN) |
+			(PMA_PMD_LED_ON << PMA_PMD_LED_RX_LBN) |
+			(PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN);
+		break;
+	default:
+		reg = SFX7101_PMA_PMD_LED_DEFAULT;
+		break;
+	}
+
+	ef4_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg);
+}
+
+static const char *const sfx7101_test_names[] = {
+	"bist"
+};
+
+static const char *sfx7101_test_name(struct ef4_nic *efx, unsigned int index)
+{
+	if (index < ARRAY_SIZE(sfx7101_test_names))
+		return sfx7101_test_names[index];
+	return NULL;
+}
+
+static int
+sfx7101_run_tests(struct ef4_nic *efx, int *results, unsigned flags)
+{
+	int rc;
+
+	if (!(flags & ETH_TEST_FL_OFFLINE))
+		return 0;
+
+	/* BIST is automatically run after a special software reset */
+	rc = tenxpress_special_reset(efx);
+	results[0] = rc ? -1 : 1;
+
+	ef4_mdio_an_reconfigure(efx);
+
+	return rc;
+}
+
+static void
+tenxpress_get_link_ksettings(struct ef4_nic *efx,
+			     struct ethtool_link_ksettings *cmd)
+{
+	u32 adv = 0, lpa = 0;
+	int reg;
+
+	reg = ef4_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL);
+	if (reg & MDIO_AN_10GBT_CTRL_ADV10G)
+		adv |= ADVERTISED_10000baseT_Full;
+	reg = ef4_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
+	if (reg & MDIO_AN_10GBT_STAT_LP10G)
+		lpa |= ADVERTISED_10000baseT_Full;
+
+	mdio45_ethtool_ksettings_get_npage(&efx->mdio, cmd, adv, lpa);
+
+	/* In loopback, the PHY automatically brings up the correct interface,
+	 * but doesn't advertise the correct speed. So override it */
+	if (LOOPBACK_EXTERNAL(efx))
+		cmd->base.speed = SPEED_10000;
+}
+
+static int
+tenxpress_set_link_ksettings(struct ef4_nic *efx,
+			     const struct ethtool_link_ksettings *cmd)
+{
+	if (!cmd->base.autoneg)
+		return -EINVAL;
+
+	return ef4_mdio_set_link_ksettings(efx, cmd);
+}
+
+static void sfx7101_set_npage_adv(struct ef4_nic *efx, u32 advertising)
+{
+	ef4_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+			  MDIO_AN_10GBT_CTRL_ADV10G,
+			  advertising & ADVERTISED_10000baseT_Full);
+}
+
+const struct ef4_phy_operations falcon_sfx7101_phy_ops = {
+	.probe		  = tenxpress_phy_probe,
+	.init             = tenxpress_phy_init,
+	.reconfigure      = tenxpress_phy_reconfigure,
+	.poll             = tenxpress_phy_poll,
+	.fini             = sfx7101_phy_fini,
+	.remove		  = tenxpress_phy_remove,
+	.get_link_ksettings = tenxpress_get_link_ksettings,
+	.set_link_ksettings = tenxpress_set_link_ksettings,
+	.set_npage_adv    = sfx7101_set_npage_adv,
+	.test_alive	  = ef4_mdio_test_alive,
+	.test_name	  = sfx7101_test_name,
+	.run_tests	  = sfx7101_run_tests,
+};