Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 389 insertions, 0 deletions

diff --git a/drivers/net/mdio/mdio-mux-meson-g12a.c b/drivers/net/mdio/mdio-mux-meson-g12a.c
new file mode 100644
index 000000000..ab863530c
--- /dev/null
+++ b/drivers/net/mdio/mdio-mux-meson-g12a.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019 Baylibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mdio-mux.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define ETH_PLL_STS		0x40
+#define ETH_PLL_CTL0		0x44
+#define  PLL_CTL0_LOCK_DIG	BIT(30)
+#define  PLL_CTL0_RST		BIT(29)
+#define  PLL_CTL0_EN		BIT(28)
+#define  PLL_CTL0_SEL		BIT(23)
+#define  PLL_CTL0_N		GENMASK(14, 10)
+#define  PLL_CTL0_M		GENMASK(8, 0)
+#define  PLL_LOCK_TIMEOUT	1000000
+#define  PLL_MUX_NUM_PARENT	2
+#define ETH_PLL_CTL1		0x48
+#define ETH_PLL_CTL2		0x4c
+#define ETH_PLL_CTL3		0x50
+#define ETH_PLL_CTL4		0x54
+#define ETH_PLL_CTL5		0x58
+#define ETH_PLL_CTL6		0x5c
+#define ETH_PLL_CTL7		0x60
+
+#define ETH_PHY_CNTL0		0x80
+#define   EPHY_G12A_ID		0x33010180
+#define ETH_PHY_CNTL1		0x84
+#define  PHY_CNTL1_ST_MODE	GENMASK(2, 0)
+#define  PHY_CNTL1_ST_PHYADD	GENMASK(7, 3)
+#define   EPHY_DFLT_ADD		8
+#define  PHY_CNTL1_MII_MODE	GENMASK(15, 14)
+#define   EPHY_MODE_RMII	0x1
+#define  PHY_CNTL1_CLK_EN	BIT(16)
+#define  PHY_CNTL1_CLKFREQ	BIT(17)
+#define  PHY_CNTL1_PHY_ENB	BIT(18)
+#define ETH_PHY_CNTL2		0x88
+#define  PHY_CNTL2_USE_INTERNAL	BIT(5)
+#define  PHY_CNTL2_SMI_SRC_MAC	BIT(6)
+#define  PHY_CNTL2_RX_CLK_EPHY	BIT(9)
+
+#define MESON_G12A_MDIO_EXTERNAL_ID 0
+#define MESON_G12A_MDIO_INTERNAL_ID 1
+
+struct g12a_mdio_mux {
+	bool pll_is_enabled;
+	void __iomem *regs;
+	void *mux_handle;
+	struct clk *pclk;
+	struct clk *pll;
+};
+
+struct g12a_ephy_pll {
+	void __iomem *base;
+	struct clk_hw hw;
+};
+
+#define g12a_ephy_pll_to_dev(_hw)			\
+	container_of(_hw, struct g12a_ephy_pll, hw)
+
+static unsigned long g12a_ephy_pll_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
+	u32 val, m, n;
+
+	val = readl(pll->base + ETH_PLL_CTL0);
+	m = FIELD_GET(PLL_CTL0_M, val);
+	n = FIELD_GET(PLL_CTL0_N, val);
+
+	return parent_rate * m / n;
+}
+
+static int g12a_ephy_pll_enable(struct clk_hw *hw)
+{
+	struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
+	u32 val = readl(pll->base + ETH_PLL_CTL0);
+
+	/* Apply both enable an reset */
+	val |= PLL_CTL0_RST | PLL_CTL0_EN;
+	writel(val, pll->base + ETH_PLL_CTL0);
+
+	/* Clear the reset to let PLL lock */
+	val &= ~PLL_CTL0_RST;
+	writel(val, pll->base + ETH_PLL_CTL0);
+
+	/* Poll on the digital lock instead of the usual analog lock
+	 * This is done because bit 31 is unreliable on some SoC. Bit
+	 * 31 may indicate that the PLL is not lock eventhough the clock
+	 * is actually running
+	 */
+	return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val,
+				  val & PLL_CTL0_LOCK_DIG, 0, PLL_LOCK_TIMEOUT);
+}
+
+static void g12a_ephy_pll_disable(struct clk_hw *hw)
+{
+	struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
+	u32 val;
+
+	val = readl(pll->base + ETH_PLL_CTL0);
+	val &= ~PLL_CTL0_EN;
+	val |= PLL_CTL0_RST;
+	writel(val, pll->base + ETH_PLL_CTL0);
+}
+
+static int g12a_ephy_pll_is_enabled(struct clk_hw *hw)
+{
+	struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
+	unsigned int val;
+
+	val = readl(pll->base + ETH_PLL_CTL0);
+
+	return (val & PLL_CTL0_LOCK_DIG) ? 1 : 0;
+}
+
+static int g12a_ephy_pll_init(struct clk_hw *hw)
+{
+	struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
+
+	/* Apply PLL HW settings */
+	writel(0x29c0040a, pll->base + ETH_PLL_CTL0);
+	writel(0x927e0000, pll->base + ETH_PLL_CTL1);
+	writel(0xac5f49e5, pll->base + ETH_PLL_CTL2);
+	writel(0x00000000, pll->base + ETH_PLL_CTL3);
+	writel(0x00000000, pll->base + ETH_PLL_CTL4);
+	writel(0x20200000, pll->base + ETH_PLL_CTL5);
+	writel(0x0000c002, pll->base + ETH_PLL_CTL6);
+	writel(0x00000023, pll->base + ETH_PLL_CTL7);
+
+	return 0;
+}
+
+static const struct clk_ops g12a_ephy_pll_ops = {
+	.recalc_rate	= g12a_ephy_pll_recalc_rate,
+	.is_enabled	= g12a_ephy_pll_is_enabled,
+	.enable		= g12a_ephy_pll_enable,
+	.disable	= g12a_ephy_pll_disable,
+	.init		= g12a_ephy_pll_init,
+};
+
+static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv)
+{
+	u32 value;
+	int ret;
+
+	/* Enable the phy clock */
+	if (!priv->pll_is_enabled) {
+		ret = clk_prepare_enable(priv->pll);
+		if (ret)
+			return ret;
+	}
+
+	priv->pll_is_enabled = true;
+
+	/* Initialize ephy control */
+	writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0);
+
+	/* Make sure we get a 0 -> 1 transition on the enable bit */
+	value = FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
+		FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
+		FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
+		PHY_CNTL1_CLK_EN |
+		PHY_CNTL1_CLKFREQ;
+	writel(value, priv->regs + ETH_PHY_CNTL1);
+	writel(PHY_CNTL2_USE_INTERNAL |
+	       PHY_CNTL2_SMI_SRC_MAC |
+	       PHY_CNTL2_RX_CLK_EPHY,
+	       priv->regs + ETH_PHY_CNTL2);
+
+	value |= PHY_CNTL1_PHY_ENB;
+	writel(value, priv->regs + ETH_PHY_CNTL1);
+
+	/* The phy needs a bit of time to power up */
+	mdelay(10);
+
+	return 0;
+}
+
+static int g12a_enable_external_mdio(struct g12a_mdio_mux *priv)
+{
+	/* Reset the mdio bus mux */
+	writel_relaxed(0x0, priv->regs + ETH_PHY_CNTL2);
+
+	/* Disable the phy clock if enabled */
+	if (priv->pll_is_enabled) {
+		clk_disable_unprepare(priv->pll);
+		priv->pll_is_enabled = false;
+	}
+
+	return 0;
+}
+
+static int g12a_mdio_switch_fn(int current_child, int desired_child,
+			       void *data)
+{
+	struct g12a_mdio_mux *priv = dev_get_drvdata(data);
+
+	if (current_child == desired_child)
+		return 0;
+
+	switch (desired_child) {
+	case MESON_G12A_MDIO_EXTERNAL_ID:
+		return g12a_enable_external_mdio(priv);
+	case MESON_G12A_MDIO_INTERNAL_ID:
+		return g12a_enable_internal_mdio(priv);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct of_device_id g12a_mdio_mux_match[] = {
+	{ .compatible = "amlogic,g12a-mdio-mux", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, g12a_mdio_mux_match);
+
+static int g12a_ephy_glue_clk_register(struct device *dev)
+{
+	struct g12a_mdio_mux *priv = dev_get_drvdata(dev);
+	const char *parent_names[PLL_MUX_NUM_PARENT];
+	struct clk_init_data init;
+	struct g12a_ephy_pll *pll;
+	struct clk_mux *mux;
+	struct clk *clk;
+	char *name;
+	int i;
+
+	/* get the mux parents */
+	for (i = 0; i < PLL_MUX_NUM_PARENT; i++) {
+		char in_name[8];
+
+		snprintf(in_name, sizeof(in_name), "clkin%d", i);
+		clk = devm_clk_get(dev, in_name);
+		if (IS_ERR(clk)) {
+			if (PTR_ERR(clk) != -EPROBE_DEFER)
+				dev_err(dev, "Missing clock %s\n", in_name);
+			return PTR_ERR(clk);
+		}
+
+		parent_names[i] = __clk_get_name(clk);
+	}
+
+	/* create the input mux */
+	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev));
+	if (!name)
+		return -ENOMEM;
+
+	init.name = name;
+	init.ops = &clk_mux_ro_ops;
+	init.flags = 0;
+	init.parent_names = parent_names;
+	init.num_parents = PLL_MUX_NUM_PARENT;
+
+	mux->reg = priv->regs + ETH_PLL_CTL0;
+	mux->shift = __ffs(PLL_CTL0_SEL);
+	mux->mask = PLL_CTL0_SEL >> mux->shift;
+	mux->hw.init = &init;
+
+	clk = devm_clk_register(dev, &mux->hw);
+	kfree(name);
+	if (IS_ERR(clk)) {
+		dev_err(dev, "failed to register input mux\n");
+		return PTR_ERR(clk);
+	}
+
+	/* create the pll */
+	pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return -ENOMEM;
+
+	name = kasprintf(GFP_KERNEL, "%s#pll", dev_name(dev));
+	if (!name)
+		return -ENOMEM;
+
+	init.name = name;
+	init.ops = &g12a_ephy_pll_ops;
+	init.flags = 0;
+	parent_names[0] = __clk_get_name(clk);
+	init.parent_names = parent_names;
+	init.num_parents = 1;
+
+	pll->base = priv->regs;
+	pll->hw.init = &init;
+
+	clk = devm_clk_register(dev, &pll->hw);
+	kfree(name);
+	if (IS_ERR(clk)) {
+		dev_err(dev, "failed to register input mux\n");
+		return PTR_ERR(clk);
+	}
+
+	priv->pll = clk;
+
+	return 0;
+}
+
+static int g12a_mdio_mux_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct g12a_mdio_mux *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	priv->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(priv->pclk)) {
+		ret = PTR_ERR(priv->pclk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to get peripheral clock\n");
+		return ret;
+	}
+
+	/* Make sure the device registers are clocked */
+	ret = clk_prepare_enable(priv->pclk);
+	if (ret) {
+		dev_err(dev, "failed to enable peripheral clock");
+		return ret;
+	}
+
+	/* Register PLL in CCF */
+	ret = g12a_ephy_glue_clk_register(dev);
+	if (ret)
+		goto err;
+
+	ret = mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn,
+			    &priv->mux_handle, dev, NULL);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "mdio multiplexer init failed: %d", ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	clk_disable_unprepare(priv->pclk);
+	return ret;
+}
+
+static int g12a_mdio_mux_remove(struct platform_device *pdev)
+{
+	struct g12a_mdio_mux *priv = platform_get_drvdata(pdev);
+
+	mdio_mux_uninit(priv->mux_handle);
+
+	if (priv->pll_is_enabled)
+		clk_disable_unprepare(priv->pll);
+
+	clk_disable_unprepare(priv->pclk);
+
+	return 0;
+}
+
+static struct platform_driver g12a_mdio_mux_driver = {
+	.probe		= g12a_mdio_mux_probe,
+	.remove		= g12a_mdio_mux_remove,
+	.driver		= {
+		.name	= "g12a-mdio_mux",
+		.of_match_table = g12a_mdio_mux_match,
+	},
+};
+module_platform_driver(g12a_mdio_mux_driver);
+
+MODULE_DESCRIPTION("Amlogic G12a MDIO multiplexer driver");
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_LICENSE("GPL v2");