Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2270 insertions, 0 deletions

diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
new file mode 100644
index 000000000..c70f62fe3
--- /dev/null
+++ b/drivers/nfc/trf7970a.c
@@ -0,0 +1,2270 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI TRF7970a RFID/NFC Transceiver Driver
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Erick Macias <emacias@ti.com>
+ * Author: Felipe Balbi <balbi@ti.com>
+ * Author: Mark A. Greer <mgreer@animalcreek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/nfc.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+
+#include <net/nfc/nfc.h>
+#include <net/nfc/digital.h>
+
+/* There are 3 ways the host can communicate with the trf7970a:
+ * parallel mode, SPI with Slave Select (SS) mode, and SPI without
+ * SS mode.  The driver only supports the two SPI modes.
+ *
+ * The trf7970a is very timing sensitive and the VIN, EN2, and EN
+ * pins must asserted in that order and with specific delays in between.
+ * The delays used in the driver were provided by TI and have been
+ * confirmed to work with this driver.  There is a bug with the current
+ * version of the trf7970a that requires that EN2 remain low no matter
+ * what.  If it goes high, it will generate an RF field even when in
+ * passive target mode.  TI has indicated that the chip will work okay
+ * when EN2 is left low.  The 'en2-rf-quirk' device tree property
+ * indicates that trf7970a currently being used has the erratum and
+ * that EN2 must be kept low.
+ *
+ * Timeouts are implemented using the delayed workqueue kernel facility.
+ * Timeouts are required so things don't hang when there is no response
+ * from the trf7970a (or tag).  Using this mechanism creates a race with
+ * interrupts, however.  That is, an interrupt and a timeout could occur
+ * closely enough together that one is blocked by the mutex while the other
+ * executes.  When the timeout handler executes first and blocks the
+ * interrupt handler, it will eventually set the state to IDLE so the
+ * interrupt handler will check the state and exit with no harm done.
+ * When the interrupt handler executes first and blocks the timeout handler,
+ * the cancel_delayed_work() call will know that it didn't cancel the
+ * work item (i.e., timeout) and will return zero.  That return code is
+ * used by the timer handler to indicate that it should ignore the timeout
+ * once its unblocked.
+ *
+ * Aborting an active command isn't as simple as it seems because the only
+ * way to abort a command that's already been sent to the tag is so turn
+ * off power to the tag.  If we do that, though, we'd have to go through
+ * the entire anticollision procedure again but the digital layer doesn't
+ * support that.  So, if an abort is received before trf7970a_send_cmd()
+ * has sent the command to the tag, it simply returns -ECANCELED.  If the
+ * command has already been sent to the tag, then the driver continues
+ * normally and recieves the response data (or error) but just before
+ * sending the data upstream, it frees the rx_skb and sends -ECANCELED
+ * upstream instead.  If the command failed, that error will be sent
+ * upstream.
+ *
+ * When recieving data from a tag and the interrupt status register has
+ * only the SRX bit set, it means that all of the data has been received
+ * (once what's in the fifo has been read).  However, depending on timing
+ * an interrupt status with only the SRX bit set may not be recived.  In
+ * those cases, the timeout mechanism is used to wait 20 ms in case more
+ * data arrives.  After 20 ms, it is assumed that all of the data has been
+ * received and the accumulated rx data is sent upstream.  The
+ * 'TRF7970A_ST_WAIT_FOR_RX_DATA_CONT' state is used for this purpose
+ * (i.e., it indicates that some data has been received but we're not sure
+ * if there is more coming so a timeout in this state means all data has
+ * been received and there isn't an error).  The delay is 20 ms since delays
+ * of ~16 ms have been observed during testing.
+ *
+ * When transmitting a frame larger than the FIFO size (127 bytes), the
+ * driver will wait 20 ms for the FIFO to drain past the low-watermark
+ * and generate an interrupt.  The low-watermark set to 32 bytes so the
+ * interrupt should fire after 127 - 32 = 95 bytes have been sent.  At
+ * the lowest possible bit rate (6.62 kbps for 15693), it will take up
+ * to ~14.35 ms so 20 ms is used for the timeout.
+ *
+ * Type 2 write and sector select commands respond with a 4-bit ACK or NACK.
+ * Having only 4 bits in the FIFO won't normally generate an interrupt so
+ * driver enables the '4_bit_RX' bit of the Special Functions register 1
+ * to cause an interrupt in that case.  Leaving that bit for a read command
+ * messes up the data returned so it is only enabled when the framing is
+ * 'NFC_DIGITAL_FRAMING_NFCA_T2T' and the command is not a read command.
+ * Unfortunately, that means that the driver has to peek into tx frames
+ * when the framing is 'NFC_DIGITAL_FRAMING_NFCA_T2T'.  This is done by
+ * the trf7970a_per_cmd_config() routine.
+ *
+ * ISO/IEC 15693 frames specify whether to use single or double sub-carrier
+ * frequencies and whether to use low or high data rates in the flags byte
+ * of the frame.  This means that the driver has to peek at all 15693 frames
+ * to determine what speed to set the communication to.  In addition, write
+ * and lock commands use the OPTION flag to indicate that an EOF must be
+ * sent to the tag before it will send its response.  So the driver has to
+ * examine all frames for that reason too.
+ *
+ * It is unclear how long to wait before sending the EOF.  According to the
+ * Note under Table 1-1 in section 1.6 of
+ * http://www.ti.com/lit/ug/scbu011/scbu011.pdf, that wait should be at least
+ * 10 ms for TI Tag-it HF-I tags; however testing has shown that is not long
+ * enough so 20 ms is used.  So the timer is set to 40 ms - 20 ms to drain
+ * up to 127 bytes in the FIFO at the lowest bit rate plus another 20 ms to
+ * ensure the wait is long enough before sending the EOF.  This seems to work
+ * reliably.
+ */
+
+#define TRF7970A_SUPPORTED_PROTOCOLS \
+		(NFC_PROTO_MIFARE_MASK | NFC_PROTO_ISO14443_MASK |	\
+		 NFC_PROTO_ISO14443_B_MASK | NFC_PROTO_FELICA_MASK | \
+		 NFC_PROTO_ISO15693_MASK | NFC_PROTO_NFC_DEP_MASK)
+
+#define TRF7970A_AUTOSUSPEND_DELAY		30000	/* 30 seconds */
+#define TRF7970A_13MHZ_CLOCK_FREQUENCY		13560000
+#define TRF7970A_27MHZ_CLOCK_FREQUENCY		27120000
+
+#define TRF7970A_RX_SKB_ALLOC_SIZE		256
+
+#define TRF7970A_FIFO_SIZE			127
+
+/* TX length is 3 nibbles long ==> 4KB - 1 bytes max */
+#define TRF7970A_TX_MAX				(4096 - 1)
+
+#define TRF7970A_WAIT_FOR_TX_IRQ		20
+#define TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT	20
+#define TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT	20
+#define TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF	40
+
+/* Guard times for various RF technologies (in us) */
+#define TRF7970A_GUARD_TIME_NFCA		5000
+#define TRF7970A_GUARD_TIME_NFCB		5000
+#define TRF7970A_GUARD_TIME_NFCF		20000
+#define TRF7970A_GUARD_TIME_15693		1000
+
+/* Quirks */
+/* Erratum: When reading IRQ Status register on trf7970a, we must issue a
+ * read continuous command for IRQ Status and Collision Position registers.
+ */
+#define TRF7970A_QUIRK_IRQ_STATUS_READ		BIT(0)
+#define TRF7970A_QUIRK_EN2_MUST_STAY_LOW	BIT(1)
+
+/* Direct commands */
+#define TRF7970A_CMD_IDLE			0x00
+#define TRF7970A_CMD_SOFT_INIT			0x03
+#define TRF7970A_CMD_RF_COLLISION		0x04
+#define TRF7970A_CMD_RF_COLLISION_RESPONSE_N	0x05
+#define TRF7970A_CMD_RF_COLLISION_RESPONSE_0	0x06
+#define TRF7970A_CMD_FIFO_RESET			0x0f
+#define TRF7970A_CMD_TRANSMIT_NO_CRC		0x10
+#define TRF7970A_CMD_TRANSMIT			0x11
+#define TRF7970A_CMD_DELAY_TRANSMIT_NO_CRC	0x12
+#define TRF7970A_CMD_DELAY_TRANSMIT		0x13
+#define TRF7970A_CMD_EOF			0x14
+#define TRF7970A_CMD_CLOSE_SLOT			0x15
+#define TRF7970A_CMD_BLOCK_RX			0x16
+#define TRF7970A_CMD_ENABLE_RX			0x17
+#define TRF7970A_CMD_TEST_INT_RF		0x18
+#define TRF7970A_CMD_TEST_EXT_RF		0x19
+#define TRF7970A_CMD_RX_GAIN_ADJUST		0x1a
+
+/* Bits determining whether its a direct command or register R/W,
+ * whether to use a continuous SPI transaction or not, and the actual
+ * direct cmd opcode or regster address.
+ */
+#define TRF7970A_CMD_BIT_CTRL			BIT(7)
+#define TRF7970A_CMD_BIT_RW			BIT(6)
+#define TRF7970A_CMD_BIT_CONTINUOUS		BIT(5)
+#define TRF7970A_CMD_BIT_OPCODE(opcode)		((opcode) & 0x1f)
+
+/* Registers addresses */
+#define TRF7970A_CHIP_STATUS_CTRL		0x00
+#define TRF7970A_ISO_CTRL			0x01
+#define TRF7970A_ISO14443B_TX_OPTIONS		0x02
+#define TRF7970A_ISO14443A_HIGH_BITRATE_OPTIONS	0x03
+#define TRF7970A_TX_TIMER_SETTING_H_BYTE	0x04
+#define TRF7970A_TX_TIMER_SETTING_L_BYTE	0x05
+#define TRF7970A_TX_PULSE_LENGTH_CTRL		0x06
+#define TRF7970A_RX_NO_RESPONSE_WAIT		0x07
+#define TRF7970A_RX_WAIT_TIME			0x08
+#define TRF7970A_MODULATOR_SYS_CLK_CTRL		0x09
+#define TRF7970A_RX_SPECIAL_SETTINGS		0x0a
+#define TRF7970A_REG_IO_CTRL			0x0b
+#define TRF7970A_IRQ_STATUS			0x0c
+#define TRF7970A_COLLISION_IRQ_MASK		0x0d
+#define TRF7970A_COLLISION_POSITION		0x0e
+#define TRF7970A_RSSI_OSC_STATUS		0x0f
+#define TRF7970A_SPECIAL_FCN_REG1		0x10
+#define TRF7970A_SPECIAL_FCN_REG2		0x11
+#define TRF7970A_RAM1				0x12
+#define TRF7970A_RAM2				0x13
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS	0x14
+#define TRF7970A_NFC_LOW_FIELD_LEVEL		0x16
+#define TRF7970A_NFCID1				0x17
+#define TRF7970A_NFC_TARGET_LEVEL		0x18
+#define TRF79070A_NFC_TARGET_PROTOCOL		0x19
+#define TRF7970A_TEST_REGISTER1			0x1a
+#define TRF7970A_TEST_REGISTER2			0x1b
+#define TRF7970A_FIFO_STATUS			0x1c
+#define TRF7970A_TX_LENGTH_BYTE1		0x1d
+#define TRF7970A_TX_LENGTH_BYTE2		0x1e
+#define TRF7970A_FIFO_IO_REGISTER		0x1f
+
+/* Chip Status Control Register Bits */
+#define TRF7970A_CHIP_STATUS_VRS5_3		BIT(0)
+#define TRF7970A_CHIP_STATUS_REC_ON		BIT(1)
+#define TRF7970A_CHIP_STATUS_AGC_ON		BIT(2)
+#define TRF7970A_CHIP_STATUS_PM_ON		BIT(3)
+#define TRF7970A_CHIP_STATUS_RF_PWR		BIT(4)
+#define TRF7970A_CHIP_STATUS_RF_ON		BIT(5)
+#define TRF7970A_CHIP_STATUS_DIRECT		BIT(6)
+#define TRF7970A_CHIP_STATUS_STBY		BIT(7)
+
+/* ISO Control Register Bits */
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF4_662	0x00
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF256_662	0x01
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648	0x02
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF256_2648	0x03
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a	0x04
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF256_667	0x05
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669	0x06
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF256_2669	0x07
+#define TRF7970A_ISO_CTRL_14443A_106		0x08
+#define TRF7970A_ISO_CTRL_14443A_212		0x09
+#define TRF7970A_ISO_CTRL_14443A_424		0x0a
+#define TRF7970A_ISO_CTRL_14443A_848		0x0b
+#define TRF7970A_ISO_CTRL_14443B_106		0x0c
+#define TRF7970A_ISO_CTRL_14443B_212		0x0d
+#define TRF7970A_ISO_CTRL_14443B_424		0x0e
+#define TRF7970A_ISO_CTRL_14443B_848		0x0f
+#define TRF7970A_ISO_CTRL_FELICA_212		0x1a
+#define TRF7970A_ISO_CTRL_FELICA_424		0x1b
+#define TRF7970A_ISO_CTRL_NFC_NFCA_106		0x01
+#define TRF7970A_ISO_CTRL_NFC_NFCF_212		0x02
+#define TRF7970A_ISO_CTRL_NFC_NFCF_424		0x03
+#define TRF7970A_ISO_CTRL_NFC_CE_14443A		0x00
+#define TRF7970A_ISO_CTRL_NFC_CE_14443B		0x01
+#define TRF7970A_ISO_CTRL_NFC_CE		BIT(2)
+#define TRF7970A_ISO_CTRL_NFC_ACTIVE		BIT(3)
+#define TRF7970A_ISO_CTRL_NFC_INITIATOR		BIT(4)
+#define TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE	BIT(5)
+#define TRF7970A_ISO_CTRL_RFID			BIT(5)
+#define TRF7970A_ISO_CTRL_DIR_MODE		BIT(6)
+#define TRF7970A_ISO_CTRL_RX_CRC_N		BIT(7)	/* true == No CRC */
+
+#define TRF7970A_ISO_CTRL_RFID_SPEED_MASK	0x1f
+
+/* Modulator and SYS_CLK Control Register Bits */
+#define TRF7970A_MODULATOR_DEPTH(n)		((n) & 0x7)
+#define TRF7970A_MODULATOR_DEPTH_ASK10		(TRF7970A_MODULATOR_DEPTH(0))
+#define TRF7970A_MODULATOR_DEPTH_OOK		(TRF7970A_MODULATOR_DEPTH(1))
+#define TRF7970A_MODULATOR_DEPTH_ASK7		(TRF7970A_MODULATOR_DEPTH(2))
+#define TRF7970A_MODULATOR_DEPTH_ASK8_5		(TRF7970A_MODULATOR_DEPTH(3))
+#define TRF7970A_MODULATOR_DEPTH_ASK13		(TRF7970A_MODULATOR_DEPTH(4))
+#define TRF7970A_MODULATOR_DEPTH_ASK16		(TRF7970A_MODULATOR_DEPTH(5))
+#define TRF7970A_MODULATOR_DEPTH_ASK22		(TRF7970A_MODULATOR_DEPTH(6))
+#define TRF7970A_MODULATOR_DEPTH_ASK30		(TRF7970A_MODULATOR_DEPTH(7))
+#define TRF7970A_MODULATOR_EN_ANA		BIT(3)
+#define TRF7970A_MODULATOR_CLK(n)		(((n) & 0x3) << 4)
+#define TRF7970A_MODULATOR_CLK_DISABLED		(TRF7970A_MODULATOR_CLK(0))
+#define TRF7970A_MODULATOR_CLK_3_6		(TRF7970A_MODULATOR_CLK(1))
+#define TRF7970A_MODULATOR_CLK_6_13		(TRF7970A_MODULATOR_CLK(2))
+#define TRF7970A_MODULATOR_CLK_13_27		(TRF7970A_MODULATOR_CLK(3))
+#define TRF7970A_MODULATOR_EN_OOK		BIT(6)
+#define TRF7970A_MODULATOR_27MHZ		BIT(7)
+
+#define TRF7970A_RX_SPECIAL_SETTINGS_NO_LIM	BIT(0)
+#define TRF7970A_RX_SPECIAL_SETTINGS_AGCR	BIT(1)
+#define TRF7970A_RX_SPECIAL_SETTINGS_GD_0DB	(0x0 << 2)
+#define TRF7970A_RX_SPECIAL_SETTINGS_GD_5DB	(0x1 << 2)
+#define TRF7970A_RX_SPECIAL_SETTINGS_GD_10DB	(0x2 << 2)
+#define TRF7970A_RX_SPECIAL_SETTINGS_GD_15DB	(0x3 << 2)
+#define TRF7970A_RX_SPECIAL_SETTINGS_HBT	BIT(4)
+#define TRF7970A_RX_SPECIAL_SETTINGS_M848	BIT(5)
+#define TRF7970A_RX_SPECIAL_SETTINGS_C424	BIT(6)
+#define TRF7970A_RX_SPECIAL_SETTINGS_C212	BIT(7)
+
+#define TRF7970A_REG_IO_CTRL_VRS(v)		((v) & 0x07)
+#define TRF7970A_REG_IO_CTRL_IO_LOW		BIT(5)
+#define TRF7970A_REG_IO_CTRL_EN_EXT_PA		BIT(6)
+#define TRF7970A_REG_IO_CTRL_AUTO_REG		BIT(7)
+
+/* IRQ Status Register Bits */
+#define TRF7970A_IRQ_STATUS_NORESP		BIT(0)	/* ISO15693 only */
+#define TRF7970A_IRQ_STATUS_NFC_COL_ERROR	BIT(0)
+#define TRF7970A_IRQ_STATUS_COL			BIT(1)
+#define TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR	BIT(2)
+#define TRF7970A_IRQ_STATUS_NFC_RF		BIT(2)
+#define TRF7970A_IRQ_STATUS_PARITY_ERROR	BIT(3)
+#define TRF7970A_IRQ_STATUS_NFC_SDD		BIT(3)
+#define TRF7970A_IRQ_STATUS_CRC_ERROR		BIT(4)
+#define TRF7970A_IRQ_STATUS_NFC_PROTO_ERROR	BIT(4)
+#define TRF7970A_IRQ_STATUS_FIFO		BIT(5)
+#define TRF7970A_IRQ_STATUS_SRX			BIT(6)
+#define TRF7970A_IRQ_STATUS_TX			BIT(7)
+
+#define TRF7970A_IRQ_STATUS_ERROR				\
+		(TRF7970A_IRQ_STATUS_COL |			\
+		 TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR |	\
+		 TRF7970A_IRQ_STATUS_PARITY_ERROR |		\
+		 TRF7970A_IRQ_STATUS_CRC_ERROR)
+
+#define TRF7970A_RSSI_OSC_STATUS_RSSI_MASK	(BIT(2) | BIT(1) | BIT(0))
+#define TRF7970A_RSSI_OSC_STATUS_RSSI_X_MASK	(BIT(5) | BIT(4) | BIT(3))
+#define TRF7970A_RSSI_OSC_STATUS_RSSI_OSC_OK	BIT(6)
+
+#define TRF7970A_SPECIAL_FCN_REG1_COL_7_6		BIT(0)
+#define TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL		BIT(1)
+#define TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX		BIT(2)
+#define TRF7970A_SPECIAL_FCN_REG1_SP_DIR_MODE		BIT(3)
+#define TRF7970A_SPECIAL_FCN_REG1_NEXT_SLOT_37US	BIT(4)
+#define TRF7970A_SPECIAL_FCN_REG1_PAR43			BIT(5)
+
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_124	(0x0 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_120	(0x1 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_112	(0x2 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96	(0x3 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_4	0x0
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_8	0x1
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_16	0x2
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32	0x3
+
+#define TRF7970A_NFC_LOW_FIELD_LEVEL_RFDET(v)	((v) & 0x07)
+#define TRF7970A_NFC_LOW_FIELD_LEVEL_CLEX_DIS	BIT(7)
+
+#define TRF7970A_NFC_TARGET_LEVEL_RFDET(v)	((v) & 0x07)
+#define TRF7970A_NFC_TARGET_LEVEL_HI_RF		BIT(3)
+#define TRF7970A_NFC_TARGET_LEVEL_SDD_EN	BIT(5)
+#define TRF7970A_NFC_TARGET_LEVEL_LD_S_4BYTES	(0x0 << 6)
+#define TRF7970A_NFC_TARGET_LEVEL_LD_S_7BYTES	(0x1 << 6)
+#define TRF7970A_NFC_TARGET_LEVEL_LD_S_10BYTES	(0x2 << 6)
+
+#define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106		BIT(0)
+#define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_212		BIT(1)
+#define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_424		(BIT(0) | BIT(1))
+#define TRF79070A_NFC_TARGET_PROTOCOL_PAS_14443B	BIT(2)
+#define TRF79070A_NFC_TARGET_PROTOCOL_PAS_106		BIT(3)
+#define TRF79070A_NFC_TARGET_PROTOCOL_FELICA		BIT(4)
+#define TRF79070A_NFC_TARGET_PROTOCOL_RF_L		BIT(6)
+#define TRF79070A_NFC_TARGET_PROTOCOL_RF_H		BIT(7)
+
+#define TRF79070A_NFC_TARGET_PROTOCOL_106A		\
+	 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_RF_L |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_PAS_106 |	\
+	  TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106)
+
+#define TRF79070A_NFC_TARGET_PROTOCOL_106B		\
+	 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_RF_L |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_PAS_14443B |	\
+	  TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106)
+
+#define TRF79070A_NFC_TARGET_PROTOCOL_212F		\
+	 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_RF_L |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_FELICA |	\
+	  TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_212)
+
+#define TRF79070A_NFC_TARGET_PROTOCOL_424F		\
+	 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_RF_L |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_FELICA |	\
+	  TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_424)
+
+#define TRF7970A_FIFO_STATUS_OVERFLOW		BIT(7)
+
+/* NFC (ISO/IEC 14443A) Type 2 Tag commands */
+#define NFC_T2T_CMD_READ			0x30
+
+/* ISO 15693 commands codes */
+#define ISO15693_CMD_INVENTORY			0x01
+#define ISO15693_CMD_READ_SINGLE_BLOCK		0x20
+#define ISO15693_CMD_WRITE_SINGLE_BLOCK		0x21
+#define ISO15693_CMD_LOCK_BLOCK			0x22
+#define ISO15693_CMD_READ_MULTIPLE_BLOCK	0x23
+#define ISO15693_CMD_WRITE_MULTIPLE_BLOCK	0x24
+#define ISO15693_CMD_SELECT			0x25
+#define ISO15693_CMD_RESET_TO_READY		0x26
+#define ISO15693_CMD_WRITE_AFI			0x27
+#define ISO15693_CMD_LOCK_AFI			0x28
+#define ISO15693_CMD_WRITE_DSFID		0x29
+#define ISO15693_CMD_LOCK_DSFID			0x2a
+#define ISO15693_CMD_GET_SYSTEM_INFO		0x2b
+#define ISO15693_CMD_GET_MULTIPLE_BLOCK_SECURITY_STATUS	0x2c
+
+/* ISO 15693 request and response flags */
+#define ISO15693_REQ_FLAG_SUB_CARRIER		BIT(0)
+#define ISO15693_REQ_FLAG_DATA_RATE		BIT(1)
+#define ISO15693_REQ_FLAG_INVENTORY		BIT(2)
+#define ISO15693_REQ_FLAG_PROTOCOL_EXT		BIT(3)
+#define ISO15693_REQ_FLAG_SELECT		BIT(4)
+#define ISO15693_REQ_FLAG_AFI			BIT(4)
+#define ISO15693_REQ_FLAG_ADDRESS		BIT(5)
+#define ISO15693_REQ_FLAG_NB_SLOTS		BIT(5)
+#define ISO15693_REQ_FLAG_OPTION		BIT(6)
+
+#define ISO15693_REQ_FLAG_SPEED_MASK \
+		(ISO15693_REQ_FLAG_SUB_CARRIER | ISO15693_REQ_FLAG_DATA_RATE)
+
+enum trf7970a_state {
+	TRF7970A_ST_PWR_OFF,
+	TRF7970A_ST_RF_OFF,
+	TRF7970A_ST_IDLE,
+	TRF7970A_ST_IDLE_RX_BLOCKED,
+	TRF7970A_ST_WAIT_FOR_TX_FIFO,
+	TRF7970A_ST_WAIT_FOR_RX_DATA,
+	TRF7970A_ST_WAIT_FOR_RX_DATA_CONT,
+	TRF7970A_ST_WAIT_TO_ISSUE_EOF,
+	TRF7970A_ST_LISTENING,
+	TRF7970A_ST_LISTENING_MD,
+	TRF7970A_ST_MAX
+};
+
+struct trf7970a {
+	enum trf7970a_state		state;
+	struct device			*dev;
+	struct spi_device		*spi;
+	struct regulator		*regulator;
+	struct nfc_digital_dev		*ddev;
+	u32				quirks;
+	bool				is_initiator;
+	bool				aborting;
+	struct sk_buff			*tx_skb;
+	struct sk_buff			*rx_skb;
+	nfc_digital_cmd_complete_t	cb;
+	void				*cb_arg;
+	u8				chip_status_ctrl;
+	u8				iso_ctrl;
+	u8				iso_ctrl_tech;
+	u8				modulator_sys_clk_ctrl;
+	u8				special_fcn_reg1;
+	u8				io_ctrl;
+	unsigned int			guard_time;
+	int				technology;
+	int				framing;
+	u8				md_rf_tech;
+	u8				tx_cmd;
+	bool				issue_eof;
+	struct gpio_desc		*en_gpiod;
+	struct gpio_desc		*en2_gpiod;
+	struct mutex			lock;
+	unsigned int			timeout;
+	bool				ignore_timeout;
+	struct delayed_work		timeout_work;
+};
+
+static int trf7970a_cmd(struct trf7970a *trf, u8 opcode)
+{
+	u8 cmd = TRF7970A_CMD_BIT_CTRL | TRF7970A_CMD_BIT_OPCODE(opcode);
+	int ret;
+
+	dev_dbg(trf->dev, "cmd: 0x%x\n", cmd);
+
+	ret = spi_write(trf->spi, &cmd, 1);
+	if (ret)
+		dev_err(trf->dev, "%s - cmd: 0x%x, ret: %d\n", __func__, cmd,
+			ret);
+	return ret;
+}
+
+static int trf7970a_read(struct trf7970a *trf, u8 reg, u8 *val)
+{
+	u8 addr = TRF7970A_CMD_BIT_RW | reg;
+	int ret;
+
+	ret = spi_write_then_read(trf->spi, &addr, 1, val, 1);
+	if (ret)
+		dev_err(trf->dev, "%s - addr: 0x%x, ret: %d\n", __func__, addr,
+			ret);
+
+	dev_dbg(trf->dev, "read(0x%x): 0x%x\n", addr, *val);
+
+	return ret;
+}
+
+static int trf7970a_read_cont(struct trf7970a *trf, u8 reg, u8 *buf,
+			      size_t len)
+{
+	u8 addr = reg | TRF7970A_CMD_BIT_RW | TRF7970A_CMD_BIT_CONTINUOUS;
+	struct spi_transfer t[2];
+	struct spi_message m;
+	int ret;
+
+	dev_dbg(trf->dev, "read_cont(0x%x, %zd)\n", addr, len);
+
+	spi_message_init(&m);
+
+	memset(&t, 0, sizeof(t));
+
+	t[0].tx_buf = &addr;
+	t[0].len = sizeof(addr);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = buf;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	ret = spi_sync(trf->spi, &m);
+	if (ret)
+		dev_err(trf->dev, "%s - addr: 0x%x, ret: %d\n", __func__, addr,
+			ret);
+	return ret;
+}
+
+static int trf7970a_write(struct trf7970a *trf, u8 reg, u8 val)
+{
+	u8 buf[2] = { reg, val };
+	int ret;
+
+	dev_dbg(trf->dev, "write(0x%x): 0x%x\n", reg, val);
+
+	ret = spi_write(trf->spi, buf, 2);
+	if (ret)
+		dev_err(trf->dev, "%s - write: 0x%x 0x%x, ret: %d\n", __func__,
+			buf[0], buf[1], ret);
+
+	return ret;
+}
+
+static int trf7970a_read_irqstatus(struct trf7970a *trf, u8 *status)
+{
+	int ret;
+	u8 buf[2];
+	u8 addr;
+
+	addr = TRF7970A_IRQ_STATUS | TRF7970A_CMD_BIT_RW;
+
+	if (trf->quirks & TRF7970A_QUIRK_IRQ_STATUS_READ) {
+		addr |= TRF7970A_CMD_BIT_CONTINUOUS;
+		ret = spi_write_then_read(trf->spi, &addr, 1, buf, 2);
+	} else {
+		ret = spi_write_then_read(trf->spi, &addr, 1, buf, 1);
+	}
+
+	if (ret)
+		dev_err(trf->dev, "%s - irqstatus: Status read failed: %d\n",
+			__func__, ret);
+	else
+		*status = buf[0];
+
+	return ret;
+}
+
+static int trf7970a_read_target_proto(struct trf7970a *trf, u8 *target_proto)
+{
+	int ret;
+	u8 buf[2];
+	u8 addr;
+
+	addr = TRF79070A_NFC_TARGET_PROTOCOL | TRF7970A_CMD_BIT_RW |
+	       TRF7970A_CMD_BIT_CONTINUOUS;
+
+	ret = spi_write_then_read(trf->spi, &addr, 1, buf, 2);
+	if (ret)
+		dev_err(trf->dev, "%s - target_proto: Read failed: %d\n",
+			__func__, ret);
+	else
+		*target_proto = buf[0];
+
+	return ret;
+}
+
+static int trf7970a_mode_detect(struct trf7970a *trf, u8 *rf_tech)
+{
+	int ret;
+	u8 target_proto, tech;
+
+	ret = trf7970a_read_target_proto(trf, &target_proto);
+	if (ret)
+		return ret;
+
+	switch (target_proto) {
+	case TRF79070A_NFC_TARGET_PROTOCOL_106A:
+		tech = NFC_DIGITAL_RF_TECH_106A;
+		break;
+	case TRF79070A_NFC_TARGET_PROTOCOL_106B:
+		tech = NFC_DIGITAL_RF_TECH_106B;
+		break;
+	case TRF79070A_NFC_TARGET_PROTOCOL_212F:
+		tech = NFC_DIGITAL_RF_TECH_212F;
+		break;
+	case TRF79070A_NFC_TARGET_PROTOCOL_424F:
+		tech = NFC_DIGITAL_RF_TECH_424F;
+		break;
+	default:
+		dev_dbg(trf->dev, "%s - mode_detect: target_proto: 0x%x\n",
+			__func__, target_proto);
+		return -EIO;
+	}
+
+	*rf_tech = tech;
+
+	return ret;
+}
+
+static void trf7970a_send_upstream(struct trf7970a *trf)
+{
+	dev_kfree_skb_any(trf->tx_skb);
+	trf->tx_skb = NULL;
+
+	if (trf->rx_skb && !IS_ERR(trf->rx_skb) && !trf->aborting)
+		print_hex_dump_debug("trf7970a rx data: ", DUMP_PREFIX_NONE,
+				     16, 1, trf->rx_skb->data, trf->rx_skb->len,
+				     false);
+
+	trf->state = TRF7970A_ST_IDLE;
+
+	if (trf->aborting) {
+		dev_dbg(trf->dev, "Abort process complete\n");
+
+		if (!IS_ERR(trf->rx_skb)) {
+			kfree_skb(trf->rx_skb);
+			trf->rx_skb = ERR_PTR(-ECANCELED);
+		}
+
+		trf->aborting = false;
+	}
+
+	trf->cb(trf->ddev, trf->cb_arg, trf->rx_skb);
+
+	trf->rx_skb = NULL;
+}
+
+static void trf7970a_send_err_upstream(struct trf7970a *trf, int errno)
+{
+	dev_dbg(trf->dev, "Error - state: %d, errno: %d\n", trf->state, errno);
+
+	cancel_delayed_work(&trf->timeout_work);
+
+	kfree_skb(trf->rx_skb);
+	trf->rx_skb = ERR_PTR(errno);
+
+	trf7970a_send_upstream(trf);
+}
+
+static int trf7970a_transmit(struct trf7970a *trf, struct sk_buff *skb,
+			     unsigned int len, u8 *prefix,
+			     unsigned int prefix_len)
+{
+	struct spi_transfer t[2];
+	struct spi_message m;
+	unsigned int timeout;
+	int ret;
+
+	print_hex_dump_debug("trf7970a tx data: ", DUMP_PREFIX_NONE,
+			     16, 1, skb->data, len, false);
+
+	spi_message_init(&m);
+
+	memset(&t, 0, sizeof(t));
+
+	t[0].tx_buf = prefix;
+	t[0].len = prefix_len;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = skb->data;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	ret = spi_sync(trf->spi, &m);
+	if (ret) {
+		dev_err(trf->dev, "%s - Can't send tx data: %d\n", __func__,
+			ret);
+		return ret;
+	}
+
+	skb_pull(skb, len);
+
+	if (skb->len > 0) {
+		trf->state = TRF7970A_ST_WAIT_FOR_TX_FIFO;
+		timeout = TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT;
+	} else {
+		if (trf->issue_eof) {
+			trf->state = TRF7970A_ST_WAIT_TO_ISSUE_EOF;
+			timeout = TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF;
+		} else {
+			trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA;
+
+			if (!trf->timeout)
+				timeout = TRF7970A_WAIT_FOR_TX_IRQ;
+			else
+				timeout = trf->timeout;
+		}
+	}
+
+	dev_dbg(trf->dev, "Setting timeout for %d ms, state: %d\n", timeout,
+		trf->state);
+
+	schedule_delayed_work(&trf->timeout_work, msecs_to_jiffies(timeout));
+
+	return 0;
+}
+
+static void trf7970a_fill_fifo(struct trf7970a *trf)
+{
+	struct sk_buff *skb = trf->tx_skb;
+	unsigned int len;
+	int ret;
+	u8 fifo_bytes;
+	u8 prefix;
+
+	ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes);
+	if (ret) {
+		trf7970a_send_err_upstream(trf, ret);
+		return;
+	}
+
+	dev_dbg(trf->dev, "Filling FIFO - fifo_bytes: 0x%x\n", fifo_bytes);
+
+	fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW;
+
+	/* Calculate how much more data can be written to the fifo */
+	len = TRF7970A_FIFO_SIZE - fifo_bytes;
+	if (!len) {
+		schedule_delayed_work(&trf->timeout_work,
+			msecs_to_jiffies(TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT));
+		return;
+	}
+
+	len = min(skb->len, len);
+
+	prefix = TRF7970A_CMD_BIT_CONTINUOUS | TRF7970A_FIFO_IO_REGISTER;
+
+	ret = trf7970a_transmit(trf, skb, len, &prefix, sizeof(prefix));
+	if (ret)
+		trf7970a_send_err_upstream(trf, ret);
+}
+
+static void trf7970a_drain_fifo(struct trf7970a *trf, u8 status)
+{
+	struct sk_buff *skb = trf->rx_skb;
+	int ret;
+	u8 fifo_bytes;
+
+	if (status & TRF7970A_IRQ_STATUS_ERROR) {
+		trf7970a_send_err_upstream(trf, -EIO);
+		return;
+	}
+
+	ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes);
+	if (ret) {
+		trf7970a_send_err_upstream(trf, ret);
+		return;
+	}
+
+	dev_dbg(trf->dev, "Draining FIFO - fifo_bytes: 0x%x\n", fifo_bytes);
+
+	fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW;
+
+	if (!fifo_bytes)
+		goto no_rx_data;
+
+	if (fifo_bytes > skb_tailroom(skb)) {
+		skb = skb_copy_expand(skb, skb_headroom(skb),
+				      max_t(int, fifo_bytes,
+					    TRF7970A_RX_SKB_ALLOC_SIZE),
+				      GFP_KERNEL);
+		if (!skb) {
+			trf7970a_send_err_upstream(trf, -ENOMEM);
+			return;
+		}
+
+		kfree_skb(trf->rx_skb);
+		trf->rx_skb = skb;
+	}
+
+	ret = trf7970a_read_cont(trf, TRF7970A_FIFO_IO_REGISTER,
+				 skb_put(skb, fifo_bytes), fifo_bytes);
+	if (ret) {
+		trf7970a_send_err_upstream(trf, ret);
+		return;
+	}
+
+	/* If received Type 2 ACK/NACK, shift right 4 bits and pass up */
+	if ((trf->framing == NFC_DIGITAL_FRAMING_NFCA_T2T) && (skb->len == 1) &&
+	    (trf->special_fcn_reg1 == TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX)) {
+		skb->data[0] >>= 4;
+		status = TRF7970A_IRQ_STATUS_SRX;
+	} else {
+		trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA_CONT;
+
+		ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes);
+		if (ret) {
+			trf7970a_send_err_upstream(trf, ret);
+			return;
+		}
+
+		fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW;
+
+		/* If there are bytes in the FIFO, set status to '0' so
+		 * the if stmt below doesn't fire and the driver will wait
+		 * for the trf7970a to generate another RX interrupt.
+		 */
+		if (fifo_bytes)
+			status = 0;
+	}
+
+no_rx_data:
+	if (status == TRF7970A_IRQ_STATUS_SRX) {	/* Receive complete */
+		trf7970a_send_upstream(trf);
+		return;
+	}
+
+	dev_dbg(trf->dev, "Setting timeout for %d ms\n",
+		TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT);
+
+	schedule_delayed_work(&trf->timeout_work,
+			   msecs_to_jiffies(TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT));
+}
+
+static irqreturn_t trf7970a_irq(int irq, void *dev_id)
+{
+	struct trf7970a *trf = dev_id;
+	int ret;
+	u8 status, fifo_bytes, iso_ctrl;
+
+	mutex_lock(&trf->lock);
+
+	if (trf->state == TRF7970A_ST_RF_OFF) {
+		mutex_unlock(&trf->lock);
+		return IRQ_NONE;
+	}
+
+	ret = trf7970a_read_irqstatus(trf, &status);
+	if (ret) {
+		mutex_unlock(&trf->lock);
+		return IRQ_NONE;
+	}
+
+	dev_dbg(trf->dev, "IRQ - state: %d, status: 0x%x\n", trf->state,
+		status);
+
+	if (!status) {
+		mutex_unlock(&trf->lock);
+		return IRQ_NONE;
+	}
+
+	switch (trf->state) {
+	case TRF7970A_ST_IDLE:
+	case TRF7970A_ST_IDLE_RX_BLOCKED:
+		/* If initiator and getting interrupts caused by RF noise,
+		 * turn off the receiver to avoid unnecessary interrupts.
+		 * It will be turned back on in trf7970a_send_cmd() when
+		 * the next command is issued.
+		 */
+		if (trf->is_initiator && (status & TRF7970A_IRQ_STATUS_ERROR)) {
+			trf7970a_cmd(trf, TRF7970A_CMD_BLOCK_RX);
+			trf->state = TRF7970A_ST_IDLE_RX_BLOCKED;
+		}
+
+		trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+		break;
+	case TRF7970A_ST_WAIT_FOR_TX_FIFO:
+		if (status & TRF7970A_IRQ_STATUS_TX) {
+			trf->ignore_timeout =
+			    !cancel_delayed_work(&trf->timeout_work);
+			trf7970a_fill_fifo(trf);
+		} else {
+			trf7970a_send_err_upstream(trf, -EIO);
+		}
+		break;
+	case TRF7970A_ST_WAIT_FOR_RX_DATA:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+		if (status & TRF7970A_IRQ_STATUS_SRX) {
+			trf->ignore_timeout =
+			    !cancel_delayed_work(&trf->timeout_work);
+			trf7970a_drain_fifo(trf, status);
+		} else if (status & TRF7970A_IRQ_STATUS_FIFO) {
+			ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS,
+					    &fifo_bytes);
+
+			fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW;
+
+			if (ret)
+				trf7970a_send_err_upstream(trf, ret);
+			else if (!fifo_bytes)
+				trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+		} else if ((status == TRF7970A_IRQ_STATUS_TX) ||
+			   (!trf->is_initiator &&
+			    (status == (TRF7970A_IRQ_STATUS_TX |
+					TRF7970A_IRQ_STATUS_NFC_RF)))) {
+			trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+
+			if (!trf->timeout) {
+				trf->ignore_timeout =
+				    !cancel_delayed_work(&trf->timeout_work);
+				trf->rx_skb = ERR_PTR(0);
+				trf7970a_send_upstream(trf);
+				break;
+			}
+
+			if (trf->is_initiator)
+				break;
+
+			iso_ctrl = trf->iso_ctrl;
+
+			switch (trf->framing) {
+			case NFC_DIGITAL_FRAMING_NFCA_STANDARD:
+				trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC;
+				iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+				trf->iso_ctrl = 0xff; /* Force ISO_CTRL write */
+				break;
+			case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A:
+				trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+				iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
+				trf->iso_ctrl = 0xff; /* Force ISO_CTRL write */
+				break;
+			case NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE:
+				ret = trf7970a_write(trf,
+					 TRF7970A_SPECIAL_FCN_REG1,
+					 TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL);
+				if (ret)
+					goto err_unlock_exit;
+
+				trf->special_fcn_reg1 =
+				    TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL;
+				break;
+			default:
+				break;
+			}
+
+			if (iso_ctrl != trf->iso_ctrl) {
+				ret = trf7970a_write(trf, TRF7970A_ISO_CTRL,
+						     iso_ctrl);
+				if (ret)
+					goto err_unlock_exit;
+
+				trf->iso_ctrl = iso_ctrl;
+			}
+		} else {
+			trf7970a_send_err_upstream(trf, -EIO);
+		}
+		break;
+	case TRF7970A_ST_WAIT_TO_ISSUE_EOF:
+		if (status != TRF7970A_IRQ_STATUS_TX)
+			trf7970a_send_err_upstream(trf, -EIO);
+		break;
+	case TRF7970A_ST_LISTENING:
+		if (status & TRF7970A_IRQ_STATUS_SRX) {
+			trf->ignore_timeout =
+			    !cancel_delayed_work(&trf->timeout_work);
+			trf7970a_drain_fifo(trf, status);
+		} else if (!(status & TRF7970A_IRQ_STATUS_NFC_RF)) {
+			trf7970a_send_err_upstream(trf, -EIO);
+		}
+		break;
+	case TRF7970A_ST_LISTENING_MD:
+		if (status & TRF7970A_IRQ_STATUS_SRX) {
+			trf->ignore_timeout =
+			    !cancel_delayed_work(&trf->timeout_work);
+
+			ret = trf7970a_mode_detect(trf, &trf->md_rf_tech);
+			if (ret) {
+				trf7970a_send_err_upstream(trf, ret);
+			} else {
+				trf->state = TRF7970A_ST_LISTENING;
+				trf7970a_drain_fifo(trf, status);
+			}
+		} else if (!(status & TRF7970A_IRQ_STATUS_NFC_RF)) {
+			trf7970a_send_err_upstream(trf, -EIO);
+		}
+		break;
+	default:
+		dev_err(trf->dev, "%s - Driver in invalid state: %d\n",
+			__func__, trf->state);
+	}
+
+err_unlock_exit:
+	mutex_unlock(&trf->lock);
+	return IRQ_HANDLED;
+}
+
+static void trf7970a_issue_eof(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Issuing EOF\n");
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+	if (ret)
+		trf7970a_send_err_upstream(trf, ret);
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_EOF);
+	if (ret)
+		trf7970a_send_err_upstream(trf, ret);
+
+	trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA;
+
+	dev_dbg(trf->dev, "Setting timeout for %d ms, state: %d\n",
+		trf->timeout, trf->state);
+
+	schedule_delayed_work(&trf->timeout_work,
+			      msecs_to_jiffies(trf->timeout));
+}
+
+static void trf7970a_timeout_work_handler(struct work_struct *work)
+{
+	struct trf7970a *trf = container_of(work, struct trf7970a,
+					    timeout_work.work);
+
+	dev_dbg(trf->dev, "Timeout - state: %d, ignore_timeout: %d\n",
+		trf->state, trf->ignore_timeout);
+
+	mutex_lock(&trf->lock);
+
+	if (trf->ignore_timeout)
+		trf->ignore_timeout = false;
+	else if (trf->state == TRF7970A_ST_WAIT_FOR_RX_DATA_CONT)
+		trf7970a_drain_fifo(trf, TRF7970A_IRQ_STATUS_SRX);
+	else if (trf->state == TRF7970A_ST_WAIT_TO_ISSUE_EOF)
+		trf7970a_issue_eof(trf);
+	else
+		trf7970a_send_err_upstream(trf, -ETIMEDOUT);
+
+	mutex_unlock(&trf->lock);
+}
+
+static int trf7970a_init(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Initializing device - state: %d\n", trf->state);
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_SOFT_INIT);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_IDLE);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_REG_IO_CTRL,
+			     trf->io_ctrl | TRF7970A_REG_IO_CTRL_VRS(0x1));
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL, 0);
+	if (ret)
+		goto err_out;
+
+	usleep_range(1000, 2000);
+
+	trf->chip_status_ctrl &= ~TRF7970A_CHIP_STATUS_RF_ON;
+
+	ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL,
+			     trf->modulator_sys_clk_ctrl);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS,
+			     TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96 |
+			     TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_SPECIAL_FCN_REG1, 0);
+	if (ret)
+		goto err_out;
+
+	trf->special_fcn_reg1 = 0;
+
+	trf->iso_ctrl = 0xff;
+	return 0;
+
+err_out:
+	dev_dbg(trf->dev, "Couldn't init device: %d\n", ret);
+	return ret;
+}
+
+static void trf7970a_switch_rf_off(struct trf7970a *trf)
+{
+	if ((trf->state == TRF7970A_ST_PWR_OFF) ||
+	    (trf->state == TRF7970A_ST_RF_OFF))
+		return;
+
+	dev_dbg(trf->dev, "Switching rf off\n");
+
+	trf->chip_status_ctrl &= ~TRF7970A_CHIP_STATUS_RF_ON;
+
+	trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, trf->chip_status_ctrl);
+
+	trf->aborting = false;
+	trf->state = TRF7970A_ST_RF_OFF;
+
+	pm_runtime_mark_last_busy(trf->dev);
+	pm_runtime_put_autosuspend(trf->dev);
+}
+
+static int trf7970a_switch_rf_on(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Switching rf on\n");
+
+	pm_runtime_get_sync(trf->dev);
+
+	if (trf->state != TRF7970A_ST_RF_OFF) {	/* Power on, RF off */
+		dev_err(trf->dev, "%s - Incorrect state: %d\n", __func__,
+			trf->state);
+		return -EINVAL;
+	}
+
+	ret = trf7970a_init(trf);
+	if (ret) {
+		dev_err(trf->dev, "%s - Can't initialize: %d\n", __func__, ret);
+		return ret;
+	}
+
+	trf->state = TRF7970A_ST_IDLE;
+
+	return 0;
+}
+
+static int trf7970a_switch_rf(struct nfc_digital_dev *ddev, bool on)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret = 0;
+
+	dev_dbg(trf->dev, "Switching RF - state: %d, on: %d\n", trf->state, on);
+
+	mutex_lock(&trf->lock);
+
+	if (on) {
+		switch (trf->state) {
+		case TRF7970A_ST_PWR_OFF:
+		case TRF7970A_ST_RF_OFF:
+			ret = trf7970a_switch_rf_on(trf);
+			break;
+		case TRF7970A_ST_IDLE:
+		case TRF7970A_ST_IDLE_RX_BLOCKED:
+			break;
+		default:
+			dev_err(trf->dev, "%s - Invalid request: %d %d\n",
+				__func__, trf->state, on);
+			trf7970a_switch_rf_off(trf);
+			ret = -EINVAL;
+		}
+	} else {
+		switch (trf->state) {
+		case TRF7970A_ST_PWR_OFF:
+		case TRF7970A_ST_RF_OFF:
+			break;
+		default:
+			dev_err(trf->dev, "%s - Invalid request: %d %d\n",
+				__func__, trf->state, on);
+			ret = -EINVAL;
+			fallthrough;
+		case TRF7970A_ST_IDLE:
+		case TRF7970A_ST_IDLE_RX_BLOCKED:
+		case TRF7970A_ST_WAIT_FOR_RX_DATA:
+		case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+			trf7970a_switch_rf_off(trf);
+		}
+	}
+
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_in_config_rf_tech(struct trf7970a *trf, int tech)
+{
+	int ret = 0;
+
+	dev_dbg(trf->dev, "rf technology: %d\n", tech);
+
+	switch (tech) {
+	case NFC_DIGITAL_RF_TECH_106A:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_14443A_106;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_OOK;
+		trf->guard_time = TRF7970A_GUARD_TIME_NFCA;
+		break;
+	case NFC_DIGITAL_RF_TECH_106B:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_14443B_106;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_ASK10;
+		trf->guard_time = TRF7970A_GUARD_TIME_NFCB;
+		break;
+	case NFC_DIGITAL_RF_TECH_212F:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_FELICA_212;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_ASK10;
+		trf->guard_time = TRF7970A_GUARD_TIME_NFCF;
+		break;
+	case NFC_DIGITAL_RF_TECH_424F:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_FELICA_424;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_ASK10;
+		trf->guard_time = TRF7970A_GUARD_TIME_NFCF;
+		break;
+	case NFC_DIGITAL_RF_TECH_ISO15693:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_OOK;
+		trf->guard_time = TRF7970A_GUARD_TIME_15693;
+		break;
+	default:
+		dev_dbg(trf->dev, "Unsupported rf technology: %d\n", tech);
+		return -EINVAL;
+	}
+
+	trf->technology = tech;
+
+	/* If in initiator mode and not changing the RF tech due to a
+	 * PSL sequence (indicated by 'trf->iso_ctrl == 0xff' from
+	 * trf7970a_init()), clear the NFC Target Detection Level register
+	 * due to erratum.
+	 */
+	if (trf->iso_ctrl == 0xff)
+		ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL, 0);
+
+	return ret;
+}
+
+static int trf7970a_is_rf_field(struct trf7970a *trf, bool *is_rf_field)
+{
+	int ret;
+	u8 rssi;
+
+	ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
+			     trf->chip_status_ctrl |
+			     TRF7970A_CHIP_STATUS_REC_ON);
+	if (ret)
+		return ret;
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_TEST_EXT_RF);
+	if (ret)
+		return ret;
+
+	usleep_range(50, 60);
+
+	ret = trf7970a_read(trf, TRF7970A_RSSI_OSC_STATUS, &rssi);
+	if (ret)
+		return ret;
+
+	ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
+			     trf->chip_status_ctrl);
+	if (ret)
+		return ret;
+
+	if (rssi & TRF7970A_RSSI_OSC_STATUS_RSSI_MASK)
+		*is_rf_field = true;
+	else
+		*is_rf_field = false;
+
+	return 0;
+}
+
+static int trf7970a_in_config_framing(struct trf7970a *trf, int framing)
+{
+	u8 iso_ctrl = trf->iso_ctrl_tech;
+	bool is_rf_field = false;
+	int ret;
+
+	dev_dbg(trf->dev, "framing: %d\n", framing);
+
+	switch (framing) {
+	case NFC_DIGITAL_FRAMING_NFCA_SHORT:
+	case NFC_DIGITAL_FRAMING_NFCA_STANDARD:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC;
+		iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A:
+	case NFC_DIGITAL_FRAMING_NFCA_T4T:
+	case NFC_DIGITAL_FRAMING_NFCB:
+	case NFC_DIGITAL_FRAMING_NFCB_T4T:
+	case NFC_DIGITAL_FRAMING_NFCF:
+	case NFC_DIGITAL_FRAMING_NFCF_T3T:
+	case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY:
+	case NFC_DIGITAL_FRAMING_ISO15693_T5T:
+	case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP:
+	case NFC_DIGITAL_FRAMING_NFCF_NFC_DEP:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+		iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	case NFC_DIGITAL_FRAMING_NFCA_T2T:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+		iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	default:
+		dev_dbg(trf->dev, "Unsupported Framing: %d\n", framing);
+		return -EINVAL;
+	}
+
+	trf->framing = framing;
+
+	if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) {
+		ret = trf7970a_is_rf_field(trf, &is_rf_field);
+		if (ret)
+			return ret;
+
+		if (is_rf_field)
+			return -EBUSY;
+	}
+
+	if (iso_ctrl != trf->iso_ctrl) {
+		ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl);
+		if (ret)
+			return ret;
+
+		trf->iso_ctrl = iso_ctrl;
+
+		ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL,
+				     trf->modulator_sys_clk_ctrl);
+		if (ret)
+			return ret;
+	}
+
+	if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) {
+		ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
+				     trf->chip_status_ctrl |
+				     TRF7970A_CHIP_STATUS_RF_ON);
+		if (ret)
+			return ret;
+
+		trf->chip_status_ctrl |= TRF7970A_CHIP_STATUS_RF_ON;
+
+		usleep_range(trf->guard_time, trf->guard_time + 1000);
+	}
+
+	return 0;
+}
+
+static int trf7970a_in_configure_hw(struct nfc_digital_dev *ddev, int type,
+				    int param)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret;
+
+	dev_dbg(trf->dev, "Configure hw - type: %d, param: %d\n", type, param);
+
+	mutex_lock(&trf->lock);
+
+	trf->is_initiator = true;
+
+	if ((trf->state == TRF7970A_ST_PWR_OFF) ||
+	    (trf->state == TRF7970A_ST_RF_OFF)) {
+		ret = trf7970a_switch_rf_on(trf);
+		if (ret)
+			goto err_unlock;
+	}
+
+	switch (type) {
+	case NFC_DIGITAL_CONFIG_RF_TECH:
+		ret = trf7970a_in_config_rf_tech(trf, param);
+		break;
+	case NFC_DIGITAL_CONFIG_FRAMING:
+		ret = trf7970a_in_config_framing(trf, param);
+		break;
+	default:
+		dev_dbg(trf->dev, "Unknown type: %d\n", type);
+		ret = -EINVAL;
+	}
+
+err_unlock:
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_is_iso15693_write_or_lock(u8 cmd)
+{
+	switch (cmd) {
+	case ISO15693_CMD_WRITE_SINGLE_BLOCK:
+	case ISO15693_CMD_LOCK_BLOCK:
+	case ISO15693_CMD_WRITE_MULTIPLE_BLOCK:
+	case ISO15693_CMD_WRITE_AFI:
+	case ISO15693_CMD_LOCK_AFI:
+	case ISO15693_CMD_WRITE_DSFID:
+	case ISO15693_CMD_LOCK_DSFID:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static int trf7970a_per_cmd_config(struct trf7970a *trf, struct sk_buff *skb)
+{
+	u8 *req = skb->data;
+	u8 special_fcn_reg1, iso_ctrl;
+	int ret;
+
+	trf->issue_eof = false;
+
+	/* When issuing Type 2 read command, make sure the '4_bit_RX' bit in
+	 * special functions register 1 is cleared; otherwise, its a write or
+	 * sector select command and '4_bit_RX' must be set.
+	 *
+	 * When issuing an ISO 15693 command, inspect the flags byte to see
+	 * what speed to use.  Also, remember if the OPTION flag is set on
+	 * a Type 5 write or lock command so the driver will know that it
+	 * has to send an EOF in order to get a response.
+	 */
+	if ((trf->technology == NFC_DIGITAL_RF_TECH_106A) &&
+	    (trf->framing == NFC_DIGITAL_FRAMING_NFCA_T2T)) {
+		if (req[0] == NFC_T2T_CMD_READ)
+			special_fcn_reg1 = 0;
+		else
+			special_fcn_reg1 = TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX;
+
+		if (special_fcn_reg1 != trf->special_fcn_reg1) {
+			ret = trf7970a_write(trf, TRF7970A_SPECIAL_FCN_REG1,
+					     special_fcn_reg1);
+			if (ret)
+				return ret;
+
+			trf->special_fcn_reg1 = special_fcn_reg1;
+		}
+	} else if (trf->technology == NFC_DIGITAL_RF_TECH_ISO15693) {
+		iso_ctrl = trf->iso_ctrl & ~TRF7970A_ISO_CTRL_RFID_SPEED_MASK;
+
+		switch (req[0] & ISO15693_REQ_FLAG_SPEED_MASK) {
+		case 0x00:
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_SGL_1OF4_662;
+			break;
+		case ISO15693_REQ_FLAG_SUB_CARRIER:
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a;
+			break;
+		case ISO15693_REQ_FLAG_DATA_RATE:
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648;
+			break;
+		case (ISO15693_REQ_FLAG_SUB_CARRIER |
+		      ISO15693_REQ_FLAG_DATA_RATE):
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669;
+			break;
+		}
+
+		if (iso_ctrl != trf->iso_ctrl) {
+			ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl);
+			if (ret)
+				return ret;
+
+			trf->iso_ctrl = iso_ctrl;
+		}
+
+		if ((trf->framing == NFC_DIGITAL_FRAMING_ISO15693_T5T) &&
+		    trf7970a_is_iso15693_write_or_lock(req[1]) &&
+		    (req[0] & ISO15693_REQ_FLAG_OPTION))
+			trf->issue_eof = true;
+	}
+
+	return 0;
+}
+
+static int trf7970a_send_cmd(struct nfc_digital_dev *ddev,
+			     struct sk_buff *skb, u16 timeout,
+			     nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	u8 prefix[5];
+	unsigned int len;
+	int ret;
+	u8 status;
+
+	dev_dbg(trf->dev, "New request - state: %d, timeout: %d ms, len: %d\n",
+		trf->state, timeout, skb->len);
+
+	if (skb->len > TRF7970A_TX_MAX)
+		return -EINVAL;
+
+	mutex_lock(&trf->lock);
+
+	if ((trf->state != TRF7970A_ST_IDLE) &&
+	    (trf->state != TRF7970A_ST_IDLE_RX_BLOCKED)) {
+		dev_err(trf->dev, "%s - Bogus state: %d\n", __func__,
+			trf->state);
+		ret = -EIO;
+		goto out_err;
+	}
+
+	if (trf->aborting) {
+		dev_dbg(trf->dev, "Abort process complete\n");
+		trf->aborting = false;
+		ret = -ECANCELED;
+		goto out_err;
+	}
+
+	if (timeout) {
+		trf->rx_skb = nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE,
+						 GFP_KERNEL);
+		if (!trf->rx_skb) {
+			dev_dbg(trf->dev, "Can't alloc rx_skb\n");
+			ret = -ENOMEM;
+			goto out_err;
+		}
+	}
+
+	if (trf->state == TRF7970A_ST_IDLE_RX_BLOCKED) {
+		ret = trf7970a_cmd(trf, TRF7970A_CMD_ENABLE_RX);
+		if (ret)
+			goto out_err;
+
+		trf->state = TRF7970A_ST_IDLE;
+	}
+
+	if (trf->is_initiator) {
+		ret = trf7970a_per_cmd_config(trf, skb);
+		if (ret)
+			goto out_err;
+	}
+
+	trf->ddev = ddev;
+	trf->tx_skb = skb;
+	trf->cb = cb;
+	trf->cb_arg = arg;
+	trf->timeout = timeout;
+	trf->ignore_timeout = false;
+
+	len = skb->len;
+
+	/* TX data must be prefixed with a FIFO reset cmd, a cmd that depends
+	 * on what the current framing is, the address of the TX length byte 1
+	 * register (0x1d), and the 2 byte length of the data to be transmitted.
+	 * That totals 5 bytes.
+	 */
+	prefix[0] = TRF7970A_CMD_BIT_CTRL |
+	    TRF7970A_CMD_BIT_OPCODE(TRF7970A_CMD_FIFO_RESET);
+	prefix[1] = TRF7970A_CMD_BIT_CTRL |
+	    TRF7970A_CMD_BIT_OPCODE(trf->tx_cmd);
+	prefix[2] = TRF7970A_CMD_BIT_CONTINUOUS | TRF7970A_TX_LENGTH_BYTE1;
+
+	if (trf->framing == NFC_DIGITAL_FRAMING_NFCA_SHORT) {
+		prefix[3] = 0x00;
+		prefix[4] = 0x0f;	/* 7 bits */
+	} else {
+		prefix[3] = (len & 0xf00) >> 4;
+		prefix[3] |= ((len & 0xf0) >> 4);
+		prefix[4] = ((len & 0x0f) << 4);
+	}
+
+	len = min_t(int, skb->len, TRF7970A_FIFO_SIZE);
+
+	/* Clear possible spurious interrupt */
+	ret = trf7970a_read_irqstatus(trf, &status);
+	if (ret)
+		goto out_err;
+
+	ret = trf7970a_transmit(trf, skb, len, prefix, sizeof(prefix));
+	if (ret) {
+		kfree_skb(trf->rx_skb);
+		trf->rx_skb = NULL;
+	}
+
+out_err:
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_tg_config_rf_tech(struct trf7970a *trf, int tech)
+{
+	int ret = 0;
+
+	dev_dbg(trf->dev, "rf technology: %d\n", tech);
+
+	switch (tech) {
+	case NFC_DIGITAL_RF_TECH_106A:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE |
+		    TRF7970A_ISO_CTRL_NFC_CE | TRF7970A_ISO_CTRL_NFC_CE_14443A;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_OOK;
+		break;
+	case NFC_DIGITAL_RF_TECH_212F:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE |
+		    TRF7970A_ISO_CTRL_NFC_NFCF_212;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_ASK10;
+		break;
+	case NFC_DIGITAL_RF_TECH_424F:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE |
+		    TRF7970A_ISO_CTRL_NFC_NFCF_424;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_ASK10;
+		break;
+	default:
+		dev_dbg(trf->dev, "Unsupported rf technology: %d\n", tech);
+		return -EINVAL;
+	}
+
+	trf->technology = tech;
+
+	/* Normally we write the ISO_CTRL register in
+	 * trf7970a_tg_config_framing() because the framing can change
+	 * the value written.  However, when sending a PSL RES,
+	 * digital_tg_send_psl_res_complete() doesn't call
+	 * trf7970a_tg_config_framing() so we must write the register
+	 * here.
+	 */
+	if ((trf->framing == NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED) &&
+	    (trf->iso_ctrl_tech != trf->iso_ctrl)) {
+		ret = trf7970a_write(trf, TRF7970A_ISO_CTRL,
+				     trf->iso_ctrl_tech);
+
+		trf->iso_ctrl = trf->iso_ctrl_tech;
+	}
+
+	return ret;
+}
+
+/* Since this is a target routine, several of the framing calls are
+ * made between receiving the request and sending the response so they
+ * should take effect until after the response is sent.  This is accomplished
+ * by skipping the ISO_CTRL register write here and doing it in the interrupt
+ * handler.
+ */
+static int trf7970a_tg_config_framing(struct trf7970a *trf, int framing)
+{
+	u8 iso_ctrl = trf->iso_ctrl_tech;
+	int ret;
+
+	dev_dbg(trf->dev, "framing: %d\n", framing);
+
+	switch (framing) {
+	case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC;
+		iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	case NFC_DIGITAL_FRAMING_NFCA_STANDARD:
+	case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A:
+	case NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE:
+		/* These ones are applied in the interrupt handler */
+		iso_ctrl = trf->iso_ctrl; /* Don't write to ISO_CTRL yet */
+		break;
+	case NFC_DIGITAL_FRAMING_NFCF_NFC_DEP:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+		iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	case NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+		iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	default:
+		dev_dbg(trf->dev, "Unsupported Framing: %d\n", framing);
+		return -EINVAL;
+	}
+
+	trf->framing = framing;
+
+	if (iso_ctrl != trf->iso_ctrl) {
+		ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl);
+		if (ret)
+			return ret;
+
+		trf->iso_ctrl = iso_ctrl;
+
+		ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL,
+				     trf->modulator_sys_clk_ctrl);
+		if (ret)
+			return ret;
+	}
+
+	if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) {
+		ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
+				     trf->chip_status_ctrl |
+				     TRF7970A_CHIP_STATUS_RF_ON);
+		if (ret)
+			return ret;
+
+		trf->chip_status_ctrl |= TRF7970A_CHIP_STATUS_RF_ON;
+	}
+
+	return 0;
+}
+
+static int trf7970a_tg_configure_hw(struct nfc_digital_dev *ddev, int type,
+				    int param)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret;
+
+	dev_dbg(trf->dev, "Configure hw - type: %d, param: %d\n", type, param);
+
+	mutex_lock(&trf->lock);
+
+	trf->is_initiator = false;
+
+	if ((trf->state == TRF7970A_ST_PWR_OFF) ||
+	    (trf->state == TRF7970A_ST_RF_OFF)) {
+		ret = trf7970a_switch_rf_on(trf);
+		if (ret)
+			goto err_unlock;
+	}
+
+	switch (type) {
+	case NFC_DIGITAL_CONFIG_RF_TECH:
+		ret = trf7970a_tg_config_rf_tech(trf, param);
+		break;
+	case NFC_DIGITAL_CONFIG_FRAMING:
+		ret = trf7970a_tg_config_framing(trf, param);
+		break;
+	default:
+		dev_dbg(trf->dev, "Unknown type: %d\n", type);
+		ret = -EINVAL;
+	}
+
+err_unlock:
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int _trf7970a_tg_listen(struct nfc_digital_dev *ddev, u16 timeout,
+			       nfc_digital_cmd_complete_t cb, void *arg,
+			       bool mode_detect)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret;
+
+	mutex_lock(&trf->lock);
+
+	if ((trf->state != TRF7970A_ST_IDLE) &&
+	    (trf->state != TRF7970A_ST_IDLE_RX_BLOCKED)) {
+		dev_err(trf->dev, "%s - Bogus state: %d\n", __func__,
+			trf->state);
+		ret = -EIO;
+		goto out_err;
+	}
+
+	if (trf->aborting) {
+		dev_dbg(trf->dev, "Abort process complete\n");
+		trf->aborting = false;
+		ret = -ECANCELED;
+		goto out_err;
+	}
+
+	trf->rx_skb = nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE,
+					 GFP_KERNEL);
+	if (!trf->rx_skb) {
+		dev_dbg(trf->dev, "Can't alloc rx_skb\n");
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	ret = trf7970a_write(trf, TRF7970A_RX_SPECIAL_SETTINGS,
+			     TRF7970A_RX_SPECIAL_SETTINGS_HBT |
+			     TRF7970A_RX_SPECIAL_SETTINGS_M848 |
+			     TRF7970A_RX_SPECIAL_SETTINGS_C424 |
+			     TRF7970A_RX_SPECIAL_SETTINGS_C212);
+	if (ret)
+		goto out_err;
+
+	ret = trf7970a_write(trf, TRF7970A_REG_IO_CTRL,
+			     trf->io_ctrl | TRF7970A_REG_IO_CTRL_VRS(0x1));
+	if (ret)
+		goto out_err;
+
+	ret = trf7970a_write(trf, TRF7970A_NFC_LOW_FIELD_LEVEL,
+			     TRF7970A_NFC_LOW_FIELD_LEVEL_RFDET(0x3));
+	if (ret)
+		goto out_err;
+
+	ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL,
+			     TRF7970A_NFC_TARGET_LEVEL_RFDET(0x7));
+	if (ret)
+		goto out_err;
+
+	trf->ddev = ddev;
+	trf->cb = cb;
+	trf->cb_arg = arg;
+	trf->timeout = timeout;
+	trf->ignore_timeout = false;
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_ENABLE_RX);
+	if (ret)
+		goto out_err;
+
+	trf->state = mode_detect ? TRF7970A_ST_LISTENING_MD :
+				   TRF7970A_ST_LISTENING;
+
+	schedule_delayed_work(&trf->timeout_work, msecs_to_jiffies(timeout));
+
+out_err:
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_tg_listen(struct nfc_digital_dev *ddev, u16 timeout,
+			      nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Listen - state: %d, timeout: %d ms\n",
+		trf->state, timeout);
+
+	return _trf7970a_tg_listen(ddev, timeout, cb, arg, false);
+}
+
+static int trf7970a_tg_listen_md(struct nfc_digital_dev *ddev,
+				 u16 timeout, nfc_digital_cmd_complete_t cb,
+				 void *arg)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret;
+
+	dev_dbg(trf->dev, "Listen MD - state: %d, timeout: %d ms\n",
+		trf->state, timeout);
+
+	ret = trf7970a_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_RF_TECH,
+				       NFC_DIGITAL_RF_TECH_106A);
+	if (ret)
+		return ret;
+
+	ret = trf7970a_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_FRAMING,
+				       NFC_DIGITAL_FRAMING_NFCA_NFC_DEP);
+	if (ret)
+		return ret;
+
+	return _trf7970a_tg_listen(ddev, timeout, cb, arg, true);
+}
+
+static int trf7970a_tg_get_rf_tech(struct nfc_digital_dev *ddev, u8 *rf_tech)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Get RF Tech - state: %d, rf_tech: %d\n",
+		trf->state, trf->md_rf_tech);
+
+	*rf_tech = trf->md_rf_tech;
+
+	return 0;
+}
+
+static void trf7970a_abort_cmd(struct nfc_digital_dev *ddev)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Abort process initiated\n");
+
+	mutex_lock(&trf->lock);
+
+	switch (trf->state) {
+	case TRF7970A_ST_WAIT_FOR_TX_FIFO:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+	case TRF7970A_ST_WAIT_TO_ISSUE_EOF:
+		trf->aborting = true;
+		break;
+	case TRF7970A_ST_LISTENING:
+		trf->ignore_timeout = !cancel_delayed_work(&trf->timeout_work);
+		trf7970a_send_err_upstream(trf, -ECANCELED);
+		dev_dbg(trf->dev, "Abort process complete\n");
+		break;
+	default:
+		break;
+	}
+
+	mutex_unlock(&trf->lock);
+}
+
+static struct nfc_digital_ops trf7970a_nfc_ops = {
+	.in_configure_hw	= trf7970a_in_configure_hw,
+	.in_send_cmd		= trf7970a_send_cmd,
+	.tg_configure_hw	= trf7970a_tg_configure_hw,
+	.tg_send_cmd		= trf7970a_send_cmd,
+	.tg_listen		= trf7970a_tg_listen,
+	.tg_listen_md		= trf7970a_tg_listen_md,
+	.tg_get_rf_tech		= trf7970a_tg_get_rf_tech,
+	.switch_rf		= trf7970a_switch_rf,
+	.abort_cmd		= trf7970a_abort_cmd,
+};
+
+static int trf7970a_power_up(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Powering up - state: %d\n", trf->state);
+
+	if (trf->state != TRF7970A_ST_PWR_OFF)
+		return 0;
+
+	ret = regulator_enable(trf->regulator);
+	if (ret) {
+		dev_err(trf->dev, "%s - Can't enable VIN: %d\n", __func__, ret);
+		return ret;
+	}
+
+	usleep_range(5000, 6000);
+
+	if (trf->en2_gpiod &&
+	    !(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) {
+		gpiod_set_value_cansleep(trf->en2_gpiod, 1);
+		usleep_range(1000, 2000);
+	}
+
+	gpiod_set_value_cansleep(trf->en_gpiod, 1);
+
+	usleep_range(20000, 21000);
+
+	trf->state = TRF7970A_ST_RF_OFF;
+
+	return 0;
+}
+
+static int trf7970a_power_down(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Powering down - state: %d\n", trf->state);
+
+	if (trf->state == TRF7970A_ST_PWR_OFF)
+		return 0;
+
+	if (trf->state != TRF7970A_ST_RF_OFF) {
+		dev_dbg(trf->dev, "Can't power down - not RF_OFF state (%d)\n",
+			trf->state);
+		return -EBUSY;
+	}
+
+	gpiod_set_value_cansleep(trf->en_gpiod, 0);
+
+	if (trf->en2_gpiod && !(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW))
+		gpiod_set_value_cansleep(trf->en2_gpiod, 0);
+
+	ret = regulator_disable(trf->regulator);
+	if (ret)
+		dev_err(trf->dev, "%s - Can't disable VIN: %d\n", __func__,
+			ret);
+
+	trf->state = TRF7970A_ST_PWR_OFF;
+
+	return ret;
+}
+
+static int trf7970a_startup(struct trf7970a *trf)
+{
+	int ret;
+
+	ret = trf7970a_power_up(trf);
+	if (ret)
+		return ret;
+
+	pm_runtime_set_active(trf->dev);
+	pm_runtime_enable(trf->dev);
+	pm_runtime_mark_last_busy(trf->dev);
+
+	return 0;
+}
+
+static void trf7970a_shutdown(struct trf7970a *trf)
+{
+	switch (trf->state) {
+	case TRF7970A_ST_WAIT_FOR_TX_FIFO:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+	case TRF7970A_ST_WAIT_TO_ISSUE_EOF:
+	case TRF7970A_ST_LISTENING:
+		trf7970a_send_err_upstream(trf, -ECANCELED);
+		fallthrough;
+	case TRF7970A_ST_IDLE:
+	case TRF7970A_ST_IDLE_RX_BLOCKED:
+		trf7970a_switch_rf_off(trf);
+		break;
+	default:
+		break;
+	}
+
+	pm_runtime_disable(trf->dev);
+	pm_runtime_set_suspended(trf->dev);
+
+	trf7970a_power_down(trf);
+}
+
+static int trf7970a_get_autosuspend_delay(struct device_node *np)
+{
+	int autosuspend_delay, ret;
+
+	ret = of_property_read_u32(np, "autosuspend-delay", &autosuspend_delay);
+	if (ret)
+		autosuspend_delay = TRF7970A_AUTOSUSPEND_DELAY;
+
+	return autosuspend_delay;
+}
+
+static int trf7970a_probe(struct spi_device *spi)
+{
+	struct device_node *np = spi->dev.of_node;
+	struct trf7970a *trf;
+	int uvolts, autosuspend_delay, ret;
+	u32 clk_freq = TRF7970A_13MHZ_CLOCK_FREQUENCY;
+
+	if (!np) {
+		dev_err(&spi->dev, "No Device Tree entry\n");
+		return -EINVAL;
+	}
+
+	trf = devm_kzalloc(&spi->dev, sizeof(*trf), GFP_KERNEL);
+	if (!trf)
+		return -ENOMEM;
+
+	trf->state = TRF7970A_ST_PWR_OFF;
+	trf->dev = &spi->dev;
+	trf->spi = spi;
+
+	spi->mode = SPI_MODE_1;
+	spi->bits_per_word = 8;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(trf->dev, "Can't set up SPI Communication\n");
+		return ret;
+	}
+
+	if (of_property_read_bool(np, "irq-status-read-quirk"))
+		trf->quirks |= TRF7970A_QUIRK_IRQ_STATUS_READ;
+
+	/* There are two enable pins - only EN must be present in the DT */
+	trf->en_gpiod = devm_gpiod_get_index(trf->dev, "ti,enable", 0,
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(trf->en_gpiod)) {
+		dev_err(trf->dev, "No EN GPIO property\n");
+		return PTR_ERR(trf->en_gpiod);
+	}
+
+	trf->en2_gpiod = devm_gpiod_get_index_optional(trf->dev, "ti,enable", 1,
+						       GPIOD_OUT_LOW);
+	if (!trf->en2_gpiod) {
+		dev_info(trf->dev, "No EN2 GPIO property\n");
+	} else if (IS_ERR(trf->en2_gpiod)) {
+		dev_err(trf->dev, "Error getting EN2 GPIO property: %ld\n",
+			PTR_ERR(trf->en2_gpiod));
+		return PTR_ERR(trf->en2_gpiod);
+	} else if (of_property_read_bool(np, "en2-rf-quirk")) {
+		trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW;
+	}
+
+	of_property_read_u32(np, "clock-frequency", &clk_freq);
+	if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) &&
+	    (clk_freq != TRF7970A_13MHZ_CLOCK_FREQUENCY)) {
+		dev_err(trf->dev,
+			"clock-frequency (%u Hz) unsupported\n", clk_freq);
+		return -EINVAL;
+	}
+
+	if (clk_freq == TRF7970A_27MHZ_CLOCK_FREQUENCY) {
+		trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_27MHZ;
+		dev_dbg(trf->dev, "trf7970a configured for 27MHz crystal\n");
+	} else {
+		trf->modulator_sys_clk_ctrl = 0;
+	}
+
+	ret = devm_request_threaded_irq(trf->dev, spi->irq, NULL,
+					trf7970a_irq,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"trf7970a", trf);
+	if (ret) {
+		dev_err(trf->dev, "Can't request IRQ#%d: %d\n", spi->irq, ret);
+		return ret;
+	}
+
+	mutex_init(&trf->lock);
+	INIT_DELAYED_WORK(&trf->timeout_work, trf7970a_timeout_work_handler);
+
+	trf->regulator = devm_regulator_get(&spi->dev, "vin");
+	if (IS_ERR(trf->regulator)) {
+		ret = PTR_ERR(trf->regulator);
+		dev_err(trf->dev, "Can't get VIN regulator: %d\n", ret);
+		goto err_destroy_lock;
+	}
+
+	ret = regulator_enable(trf->regulator);
+	if (ret) {
+		dev_err(trf->dev, "Can't enable VIN: %d\n", ret);
+		goto err_destroy_lock;
+	}
+
+	uvolts = regulator_get_voltage(trf->regulator);
+	if (uvolts > 4000000)
+		trf->chip_status_ctrl = TRF7970A_CHIP_STATUS_VRS5_3;
+
+	trf->regulator = devm_regulator_get(&spi->dev, "vdd-io");
+	if (IS_ERR(trf->regulator)) {
+		ret = PTR_ERR(trf->regulator);
+		dev_err(trf->dev, "Can't get VDD_IO regulator: %d\n", ret);
+		goto err_destroy_lock;
+	}
+
+	ret = regulator_enable(trf->regulator);
+	if (ret) {
+		dev_err(trf->dev, "Can't enable VDD_IO: %d\n", ret);
+		goto err_destroy_lock;
+	}
+
+	if (regulator_get_voltage(trf->regulator) == 1800000) {
+		trf->io_ctrl = TRF7970A_REG_IO_CTRL_IO_LOW;
+		dev_dbg(trf->dev, "trf7970a config vdd_io to 1.8V\n");
+	}
+
+	trf->ddev = nfc_digital_allocate_device(&trf7970a_nfc_ops,
+						TRF7970A_SUPPORTED_PROTOCOLS,
+						NFC_DIGITAL_DRV_CAPS_IN_CRC |
+						NFC_DIGITAL_DRV_CAPS_TG_CRC, 0,
+						0);
+	if (!trf->ddev) {
+		dev_err(trf->dev, "Can't allocate NFC digital device\n");
+		ret = -ENOMEM;
+		goto err_disable_regulator;
+	}
+
+	nfc_digital_set_parent_dev(trf->ddev, trf->dev);
+	nfc_digital_set_drvdata(trf->ddev, trf);
+	spi_set_drvdata(spi, trf);
+
+	autosuspend_delay = trf7970a_get_autosuspend_delay(np);
+
+	pm_runtime_set_autosuspend_delay(trf->dev, autosuspend_delay);
+	pm_runtime_use_autosuspend(trf->dev);
+
+	ret = trf7970a_startup(trf);
+	if (ret)
+		goto err_free_ddev;
+
+	ret = nfc_digital_register_device(trf->ddev);
+	if (ret) {
+		dev_err(trf->dev, "Can't register NFC digital device: %d\n",
+			ret);
+		goto err_shutdown;
+	}
+
+	return 0;
+
+err_shutdown:
+	trf7970a_shutdown(trf);
+err_free_ddev:
+	nfc_digital_free_device(trf->ddev);
+err_disable_regulator:
+	regulator_disable(trf->regulator);
+err_destroy_lock:
+	mutex_destroy(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_remove(struct spi_device *spi)
+{
+	struct trf7970a *trf = spi_get_drvdata(spi);
+
+	mutex_lock(&trf->lock);
+
+	trf7970a_shutdown(trf);
+
+	mutex_unlock(&trf->lock);
+
+	nfc_digital_unregister_device(trf->ddev);
+	nfc_digital_free_device(trf->ddev);
+
+	regulator_disable(trf->regulator);
+
+	mutex_destroy(&trf->lock);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int trf7970a_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct trf7970a *trf = spi_get_drvdata(spi);
+
+	dev_dbg(dev, "Suspend\n");
+
+	mutex_lock(&trf->lock);
+
+	trf7970a_shutdown(trf);
+
+	mutex_unlock(&trf->lock);
+
+	return 0;
+}
+
+static int trf7970a_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct trf7970a *trf = spi_get_drvdata(spi);
+	int ret;
+
+	dev_dbg(dev, "Resume\n");
+
+	mutex_lock(&trf->lock);
+
+	ret = trf7970a_startup(trf);
+
+	mutex_unlock(&trf->lock);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_PM
+static int trf7970a_pm_runtime_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct trf7970a *trf = spi_get_drvdata(spi);
+	int ret;
+
+	dev_dbg(dev, "Runtime suspend\n");
+
+	mutex_lock(&trf->lock);
+
+	ret = trf7970a_power_down(trf);
+
+	mutex_unlock(&trf->lock);
+
+	return ret;
+}
+
+static int trf7970a_pm_runtime_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct trf7970a *trf = spi_get_drvdata(spi);
+	int ret;
+
+	dev_dbg(dev, "Runtime resume\n");
+
+	ret = trf7970a_power_up(trf);
+	if (!ret)
+		pm_runtime_mark_last_busy(dev);
+
+	return ret;
+}
+#endif
+
+static const struct dev_pm_ops trf7970a_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(trf7970a_suspend, trf7970a_resume)
+	SET_RUNTIME_PM_OPS(trf7970a_pm_runtime_suspend,
+			   trf7970a_pm_runtime_resume, NULL)
+};
+
+static const struct of_device_id trf7970a_of_match[] = {
+	{.compatible = "ti,trf7970a",},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, trf7970a_of_match);
+
+static const struct spi_device_id trf7970a_id_table[] = {
+	{"trf7970a", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(spi, trf7970a_id_table);
+
+static struct spi_driver trf7970a_spi_driver = {
+	.probe		= trf7970a_probe,
+	.remove		= trf7970a_remove,
+	.id_table	= trf7970a_id_table,
+	.driver	= {
+		.name		= "trf7970a",
+		.of_match_table	= of_match_ptr(trf7970a_of_match),
+		.pm		= &trf7970a_pm_ops,
+	},
+};
+
+module_spi_driver(trf7970a_spi_driver);
+
+MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI trf7970a RFID/NFC Transceiver Driver");