Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 151 insertions, 0 deletions

diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/scsi/ufs/ufshcd-dwc.c
new file mode 100644
index 000000000..6a901da2d
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-dwc.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ */
+
+#include "ufshcd.h"
+#include "unipro.h"
+
+#include "ufshcd-dwc.h"
+#include "ufshci-dwc.h"
+
+int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
+				const struct ufshcd_dme_attr_val *v, int n)
+{
+	int ret = 0;
+	int attr_node = 0;
+
+	for (attr_node = 0; attr_node < n; attr_node++) {
+		ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel,
+			ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(ufshcd_dwc_dme_set_attrs);
+
+/**
+ * ufshcd_dwc_program_clk_div()
+ * This function programs the clk divider value. This value is needed to
+ * provide 1 microsecond tick to unipro layer.
+ * @hba: Private Structure pointer
+ * @divider_val: clock divider value to be programmed
+ *
+ */
+static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
+{
+	ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
+}
+
+/**
+ * ufshcd_dwc_link_is_up()
+ * Check if link is up
+ * @hba: private structure pointer
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
+{
+	int dme_result = 0;
+
+	ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result);
+
+	if (dme_result == UFSHCD_LINK_IS_UP) {
+		ufshcd_set_link_active(hba);
+		return 0;
+	}
+
+	return 1;
+}
+
+/**
+ * ufshcd_dwc_connection_setup()
+ * This function configures both the local side (host) and the peer side
+ * (device) unipro attributes to establish the connection to application/
+ * cport.
+ * This function is not required if the hardware is properly configured to
+ * have this connection setup on reset. But invoking this function does no
+ * harm and should be fine even working with any ufs device.
+ *
+ * @hba: pointer to drivers private data
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+static int ufshcd_dwc_connection_setup(struct ufs_hba *hba)
+{
+	static const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL },
+		{ UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER },
+		{ UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER },
+		{ UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER },
+		{ UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER },
+		{ UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER },
+		{ UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER },
+		{ UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER },
+		{ UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER },
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER }
+	};
+
+	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * ufshcd_dwc_link_startup_notify()
+ * UFS Host DWC specific link startup sequence
+ * @hba: private structure pointer
+ * @status: Callback notify status
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+					enum ufs_notify_change_status status)
+{
+	int err = 0;
+
+	if (status == PRE_CHANGE) {
+		ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125);
+
+		if (hba->vops->phy_initialization) {
+			err = hba->vops->phy_initialization(hba);
+			if (err) {
+				dev_err(hba->dev, "Phy setup failed (%d)\n",
+									err);
+				goto out;
+			}
+		}
+	} else { /* POST_CHANGE */
+		err = ufshcd_dwc_link_is_up(hba);
+		if (err) {
+			dev_err(hba->dev, "Link is not up\n");
+			goto out;
+		}
+
+		err = ufshcd_dwc_connection_setup(hba);
+		if (err)
+			dev_err(hba->dev, "Connection setup failed (%d)\n",
+									err);
+	}
+
+out:
+	return err;
+}
+EXPORT_SYMBOL(ufshcd_dwc_link_startup_notify);
+
+MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
+MODULE_DESCRIPTION("UFS Host driver for Synopsys Designware Core");
+MODULE_LICENSE("Dual BSD/GPL");