Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 739 insertions, 0 deletions

diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
new file mode 100644
index 000000000..9d0dd09a2
--- /dev/null
+++ b/drivers/usb/dwc2/platform.c
@@ -0,0 +1,739 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * platform.c - DesignWare HS OTG Controller platform driver
+ *
+ * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/reset.h>
+
+#include <linux/usb/of.h>
+
+#include "core.h"
+#include "hcd.h"
+#include "debug.h"
+
+static const char dwc2_driver_name[] = "dwc2";
+
+/*
+ * Check the dr_mode against the module configuration and hardware
+ * capabilities.
+ *
+ * The hardware, module, and dr_mode, can each be set to host, device,
+ * or otg. Check that all these values are compatible and adjust the
+ * value of dr_mode if possible.
+ *
+ *                      actual
+ *    HW  MOD dr_mode   dr_mode
+ *  ------------------------------
+ *   HST  HST  any    :  HST
+ *   HST  DEV  any    :  ---
+ *   HST  OTG  any    :  HST
+ *
+ *   DEV  HST  any    :  ---
+ *   DEV  DEV  any    :  DEV
+ *   DEV  OTG  any    :  DEV
+ *
+ *   OTG  HST  any    :  HST
+ *   OTG  DEV  any    :  DEV
+ *   OTG  OTG  any    :  dr_mode
+ */
+static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
+{
+	enum usb_dr_mode mode;
+
+	hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
+	if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
+		hsotg->dr_mode = USB_DR_MODE_OTG;
+
+	mode = hsotg->dr_mode;
+
+	if (dwc2_hw_is_device(hsotg)) {
+		if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
+			dev_err(hsotg->dev,
+				"Controller does not support host mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_PERIPHERAL;
+	} else if (dwc2_hw_is_host(hsotg)) {
+		if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
+			dev_err(hsotg->dev,
+				"Controller does not support device mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_HOST;
+	} else {
+		if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
+			mode = USB_DR_MODE_HOST;
+		else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
+			mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	if (mode != hsotg->dr_mode) {
+		dev_warn(hsotg->dev,
+			 "Configuration mismatch. dr_mode forced to %s\n",
+			mode == USB_DR_MODE_HOST ? "host" : "device");
+
+		hsotg->dr_mode = mode;
+	}
+
+	return 0;
+}
+
+static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
+				    hsotg->supplies);
+	if (ret)
+		return ret;
+
+	if (hsotg->clk) {
+		ret = clk_prepare_enable(hsotg->clk);
+		if (ret)
+			return ret;
+	}
+
+	if (hsotg->uphy) {
+		ret = usb_phy_init(hsotg->uphy);
+	} else if (hsotg->plat && hsotg->plat->phy_init) {
+		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
+	} else {
+		ret = phy_init(hsotg->phy);
+		if (ret == 0)
+			ret = phy_power_on(hsotg->phy);
+	}
+
+	return ret;
+}
+
+/**
+ * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
+ * @hsotg: The driver state
+ *
+ * A wrapper for platform code responsible for controlling
+ * low-level USB platform resources (phy, clock, regulators)
+ */
+int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
+{
+	int ret = __dwc2_lowlevel_hw_enable(hsotg);
+
+	if (ret == 0)
+		hsotg->ll_hw_enabled = true;
+	return ret;
+}
+
+static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
+	int ret = 0;
+
+	if (hsotg->uphy) {
+		usb_phy_shutdown(hsotg->uphy);
+	} else if (hsotg->plat && hsotg->plat->phy_exit) {
+		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
+	} else {
+		ret = phy_power_off(hsotg->phy);
+		if (ret == 0)
+			ret = phy_exit(hsotg->phy);
+	}
+	if (ret)
+		return ret;
+
+	if (hsotg->clk)
+		clk_disable_unprepare(hsotg->clk);
+
+	return regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+}
+
+/**
+ * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
+ * @hsotg: The driver state
+ *
+ * A wrapper for platform code responsible for controlling
+ * low-level USB platform resources (phy, clock, regulators)
+ */
+int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
+{
+	int ret = __dwc2_lowlevel_hw_disable(hsotg);
+
+	if (ret == 0)
+		hsotg->ll_hw_enabled = false;
+	return ret;
+}
+
+static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
+{
+	int i, ret;
+
+	hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
+	if (IS_ERR(hsotg->reset)) {
+		ret = PTR_ERR(hsotg->reset);
+		dev_err(hsotg->dev, "error getting reset control %d\n", ret);
+		return ret;
+	}
+
+	reset_control_deassert(hsotg->reset);
+
+	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
+	if (IS_ERR(hsotg->reset_ecc)) {
+		ret = PTR_ERR(hsotg->reset_ecc);
+		dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret);
+		return ret;
+	}
+
+	reset_control_deassert(hsotg->reset_ecc);
+
+	/*
+	 * Attempt to find a generic PHY, then look for an old style
+	 * USB PHY and then fall back to pdata
+	 */
+	hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
+	if (IS_ERR(hsotg->phy)) {
+		ret = PTR_ERR(hsotg->phy);
+		switch (ret) {
+		case -ENODEV:
+		case -ENOSYS:
+			hsotg->phy = NULL;
+			break;
+		case -EPROBE_DEFER:
+			return ret;
+		default:
+			dev_err(hsotg->dev, "error getting phy %d\n", ret);
+			return ret;
+		}
+	}
+
+	if (!hsotg->phy) {
+		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
+		if (IS_ERR(hsotg->uphy)) {
+			ret = PTR_ERR(hsotg->uphy);
+			switch (ret) {
+			case -ENODEV:
+			case -ENXIO:
+				hsotg->uphy = NULL;
+				break;
+			case -EPROBE_DEFER:
+				return ret;
+			default:
+				dev_err(hsotg->dev, "error getting usb phy %d\n",
+					ret);
+				return ret;
+			}
+		}
+	}
+
+	hsotg->plat = dev_get_platdata(hsotg->dev);
+
+	/* Clock */
+	hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
+	if (IS_ERR(hsotg->clk)) {
+		dev_err(hsotg->dev, "cannot get otg clock\n");
+		return PTR_ERR(hsotg->clk);
+	}
+
+	/* Regulators */
+	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
+		hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
+
+	ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
+				      hsotg->supplies);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(hsotg->dev, "failed to request supplies: %d\n",
+				ret);
+		return ret;
+	}
+	return 0;
+}
+
+/**
+ * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
+ * DWC_otg driver
+ *
+ * @dev: Platform device
+ *
+ * This routine is called, for example, when the rmmod command is executed. The
+ * device may or may not be electrically present. If it is present, the driver
+ * stops device processing. Any resources used on behalf of this device are
+ * freed.
+ */
+static int dwc2_driver_remove(struct platform_device *dev)
+{
+	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
+
+	dwc2_debugfs_exit(hsotg);
+	if (hsotg->hcd_enabled)
+		dwc2_hcd_remove(hsotg);
+	if (hsotg->gadget_enabled)
+		dwc2_hsotg_remove(hsotg);
+
+	dwc2_drd_exit(hsotg);
+
+	if (hsotg->params.activate_stm_id_vb_detection)
+		regulator_disable(hsotg->usb33d);
+
+	if (hsotg->ll_hw_enabled)
+		dwc2_lowlevel_hw_disable(hsotg);
+
+	reset_control_assert(hsotg->reset);
+	reset_control_assert(hsotg->reset_ecc);
+
+	return 0;
+}
+
+/**
+ * dwc2_driver_shutdown() - Called on device shutdown
+ *
+ * @dev: Platform device
+ *
+ * In specific conditions (involving usb hubs) dwc2 devices can create a
+ * lot of interrupts, even to the point of overwhelming devices running
+ * at low frequencies. Some devices need to do special clock handling
+ * at shutdown-time which may bring the system clock below the threshold
+ * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
+ * prevents reboots/poweroffs from getting stuck in such cases.
+ */
+static void dwc2_driver_shutdown(struct platform_device *dev)
+{
+	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
+
+	dwc2_disable_global_interrupts(hsotg);
+	synchronize_irq(hsotg->irq);
+}
+
+/**
+ * dwc2_check_core_endianness() - Returns true if core and AHB have
+ * opposite endianness.
+ * @hsotg:	Programming view of the DWC_otg controller.
+ */
+static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
+{
+	u32 snpsid;
+
+	snpsid = ioread32(hsotg->regs + GSNPSID);
+	if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
+	    (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
+	    (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
+		return false;
+	return true;
+}
+
+/**
+ * Check core version
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ */
+int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+
+	/*
+	 * Attempt to ensure this device is really a DWC_otg Controller.
+	 * Read and verify the GSNPSID register contents. The value should be
+	 * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
+	 */
+
+	hw->snpsid = dwc2_readl(hsotg, GSNPSID);
+	if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
+	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
+	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
+		dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
+			hw->snpsid);
+		return -ENODEV;
+	}
+
+	dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
+		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
+		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
+	return 0;
+}
+
+/**
+ * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
+ * driver
+ *
+ * @dev: Platform device
+ *
+ * This routine creates the driver components required to control the device
+ * (core, HCD, and PCD) and initializes the device. The driver components are
+ * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
+ * in the device private data. This allows the driver to access the dwc2_hsotg
+ * structure on subsequent calls to driver methods for this device.
+ */
+static int dwc2_driver_probe(struct platform_device *dev)
+{
+	struct dwc2_hsotg *hsotg;
+	struct resource *res;
+	int retval;
+
+	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
+	if (!hsotg)
+		return -ENOMEM;
+
+	hsotg->dev = &dev->dev;
+
+	/*
+	 * Use reasonable defaults so platforms don't have to provide these.
+	 */
+	if (!dev->dev.dma_mask)
+		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+	retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
+	if (retval) {
+		dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
+		return retval;
+	}
+
+	hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
+	if (IS_ERR(hsotg->regs))
+		return PTR_ERR(hsotg->regs);
+
+	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
+		(unsigned long)res->start, hsotg->regs);
+
+	retval = dwc2_lowlevel_hw_init(hsotg);
+	if (retval)
+		return retval;
+
+	spin_lock_init(&hsotg->lock);
+
+	hsotg->irq = platform_get_irq(dev, 0);
+	if (hsotg->irq < 0)
+		return hsotg->irq;
+
+	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
+		hsotg->irq);
+	retval = devm_request_irq(hsotg->dev, hsotg->irq,
+				  dwc2_handle_common_intr, IRQF_SHARED,
+				  dev_name(hsotg->dev), hsotg);
+	if (retval)
+		return retval;
+
+	hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
+	if (IS_ERR(hsotg->vbus_supply)) {
+		retval = PTR_ERR(hsotg->vbus_supply);
+		hsotg->vbus_supply = NULL;
+		if (retval != -ENODEV)
+			return retval;
+	}
+
+	retval = dwc2_lowlevel_hw_enable(hsotg);
+	if (retval)
+		return retval;
+
+	hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
+
+	retval = dwc2_get_dr_mode(hsotg);
+	if (retval)
+		goto error;
+
+	hsotg->need_phy_for_wake =
+		of_property_read_bool(dev->dev.of_node,
+				      "snps,need-phy-for-wake");
+
+	/*
+	 * Before performing any core related operations
+	 * check core version.
+	 */
+	retval = dwc2_check_core_version(hsotg);
+	if (retval)
+		goto error;
+
+	/*
+	 * Reset before dwc2_get_hwparams() then it could get power-on real
+	 * reset value form registers.
+	 */
+	retval = dwc2_core_reset(hsotg, false);
+	if (retval)
+		goto error;
+
+	/* Detect config values from hardware */
+	retval = dwc2_get_hwparams(hsotg);
+	if (retval)
+		goto error;
+
+	/*
+	 * For OTG cores, set the force mode bits to reflect the value
+	 * of dr_mode. Force mode bits should not be touched at any
+	 * other time after this.
+	 */
+	dwc2_force_dr_mode(hsotg);
+
+	retval = dwc2_init_params(hsotg);
+	if (retval)
+		goto error;
+
+	if (hsotg->params.activate_stm_id_vb_detection) {
+		u32 ggpio;
+
+		hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
+		if (IS_ERR(hsotg->usb33d)) {
+			retval = PTR_ERR(hsotg->usb33d);
+			if (retval != -EPROBE_DEFER)
+				dev_err(hsotg->dev,
+					"failed to request usb33d supply: %d\n",
+					retval);
+			goto error;
+		}
+		retval = regulator_enable(hsotg->usb33d);
+		if (retval) {
+			dev_err(hsotg->dev,
+				"failed to enable usb33d supply: %d\n", retval);
+			goto error;
+		}
+
+		ggpio = dwc2_readl(hsotg, GGPIO);
+		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(hsotg, ggpio, GGPIO);
+
+		/* ID/VBUS detection startup time */
+		usleep_range(5000, 7000);
+	}
+
+	retval = dwc2_drd_init(hsotg);
+	if (retval) {
+		if (retval != -EPROBE_DEFER)
+			dev_err(hsotg->dev, "failed to initialize dual-role\n");
+		goto error_init;
+	}
+
+	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
+		retval = dwc2_gadget_init(hsotg);
+		if (retval)
+			goto error_drd;
+		hsotg->gadget_enabled = 1;
+	}
+
+	/*
+	 * If we need PHY for wakeup we must be wakeup capable.
+	 * When we have a device that can wake without the PHY we
+	 * can adjust this condition.
+	 */
+	if (hsotg->need_phy_for_wake)
+		device_set_wakeup_capable(&dev->dev, true);
+
+	hsotg->reset_phy_on_wake =
+		of_property_read_bool(dev->dev.of_node,
+				      "snps,reset-phy-on-wake");
+	if (hsotg->reset_phy_on_wake && !hsotg->phy) {
+		dev_warn(hsotg->dev,
+			 "Quirk reset-phy-on-wake only supports generic PHYs\n");
+		hsotg->reset_phy_on_wake = false;
+	}
+
+	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
+		retval = dwc2_hcd_init(hsotg);
+		if (retval) {
+			if (hsotg->gadget_enabled)
+				dwc2_hsotg_remove(hsotg);
+			goto error_drd;
+		}
+		hsotg->hcd_enabled = 1;
+	}
+
+	platform_set_drvdata(dev, hsotg);
+	hsotg->hibernated = 0;
+
+	dwc2_debugfs_init(hsotg);
+
+	/* Gadget code manages lowlevel hw on its own */
+	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
+		dwc2_lowlevel_hw_disable(hsotg);
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+	/* Postponed adding a new gadget to the udc class driver list */
+	if (hsotg->gadget_enabled) {
+		retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
+		if (retval) {
+			hsotg->gadget.udc = NULL;
+			dwc2_hsotg_remove(hsotg);
+			goto error_debugfs;
+		}
+	}
+#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
+	return 0;
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+error_debugfs:
+	dwc2_debugfs_exit(hsotg);
+	if (hsotg->hcd_enabled)
+		dwc2_hcd_remove(hsotg);
+#endif
+error_drd:
+	dwc2_drd_exit(hsotg);
+
+error_init:
+	if (hsotg->params.activate_stm_id_vb_detection)
+		regulator_disable(hsotg->usb33d);
+error:
+	if (hsotg->ll_hw_enabled)
+		dwc2_lowlevel_hw_disable(hsotg);
+	return retval;
+}
+
+static int __maybe_unused dwc2_suspend(struct device *dev)
+{
+	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
+	bool is_device_mode = dwc2_is_device_mode(dwc2);
+	int ret = 0;
+
+	if (is_device_mode)
+		dwc2_hsotg_suspend(dwc2);
+
+	dwc2_drd_suspend(dwc2);
+
+	if (dwc2->params.activate_stm_id_vb_detection) {
+		unsigned long flags;
+		u32 ggpio, gotgctl;
+
+		/*
+		 * Need to force the mode to the current mode to avoid Mode
+		 * Mismatch Interrupt when ID detection will be disabled.
+		 */
+		dwc2_force_mode(dwc2, !is_device_mode);
+
+		spin_lock_irqsave(&dwc2->lock, flags);
+		gotgctl = dwc2_readl(dwc2, GOTGCTL);
+		/* bypass debounce filter, enable overrides */
+		gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
+		gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
+		/* Force A / B session if needed */
+		if (gotgctl & GOTGCTL_ASESVLD)
+			gotgctl |= GOTGCTL_AVALOVAL;
+		if (gotgctl & GOTGCTL_BSESVLD)
+			gotgctl |= GOTGCTL_BVALOVAL;
+		dwc2_writel(dwc2, gotgctl, GOTGCTL);
+		spin_unlock_irqrestore(&dwc2->lock, flags);
+
+		ggpio = dwc2_readl(dwc2, GGPIO);
+		ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(dwc2, ggpio, GGPIO);
+
+		regulator_disable(dwc2->usb33d);
+	}
+
+	if (dwc2->ll_hw_enabled &&
+	    (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
+		ret = __dwc2_lowlevel_hw_disable(dwc2);
+		dwc2->phy_off_for_suspend = true;
+	}
+
+	return ret;
+}
+
+static int __maybe_unused dwc2_resume(struct device *dev)
+{
+	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
+		ret = __dwc2_lowlevel_hw_enable(dwc2);
+		if (ret)
+			return ret;
+	}
+	dwc2->phy_off_for_suspend = false;
+
+	if (dwc2->params.activate_stm_id_vb_detection) {
+		unsigned long flags;
+		u32 ggpio, gotgctl;
+
+		ret = regulator_enable(dwc2->usb33d);
+		if (ret)
+			return ret;
+
+		ggpio = dwc2_readl(dwc2, GGPIO);
+		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(dwc2, ggpio, GGPIO);
+
+		/* ID/VBUS detection startup time */
+		usleep_range(5000, 7000);
+
+		spin_lock_irqsave(&dwc2->lock, flags);
+		gotgctl = dwc2_readl(dwc2, GOTGCTL);
+		gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
+		gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
+			     GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
+		dwc2_writel(dwc2, gotgctl, GOTGCTL);
+		spin_unlock_irqrestore(&dwc2->lock, flags);
+	}
+
+	/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
+	dwc2_force_dr_mode(dwc2);
+
+	dwc2_drd_resume(dwc2);
+
+	if (dwc2_is_device_mode(dwc2))
+		ret = dwc2_hsotg_resume(dwc2);
+
+	return ret;
+}
+
+static const struct dev_pm_ops dwc2_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
+};
+
+static struct platform_driver dwc2_platform_driver = {
+	.driver = {
+		.name = dwc2_driver_name,
+		.of_match_table = dwc2_of_match_table,
+		.pm = &dwc2_dev_pm_ops,
+	},
+	.probe = dwc2_driver_probe,
+	.remove = dwc2_driver_remove,
+	.shutdown = dwc2_driver_shutdown,
+};
+
+module_platform_driver(dwc2_platform_driver);
+
+MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue");
+MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>");
+MODULE_LICENSE("Dual BSD/GPL");