Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 500 insertions, 0 deletions

diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
new file mode 100644
index 000000000..7558cc4d9
--- /dev/null
+++ b/drivers/usb/host/bcma-hcd.c
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom specific Advanced Microcontroller Bus
+ * Broadcom USB-core driver (BCMA bus glue)
+ *
+ * Copyright 2011-2015 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Based on ssb-ohci driver
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005-2011 Broadcom Corporation
+ */
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
+MODULE_LICENSE("GPL");
+
+/* See BCMA_CLKCTLST_EXTRESREQ and BCMA_CLKCTLST_EXTRESST */
+#define USB_BCMA_CLKCTLST_USB_CLK_REQ			0x00000100
+
+struct bcma_hcd_device {
+	struct bcma_device *core;
+	struct platform_device *ehci_dev;
+	struct platform_device *ohci_dev;
+	struct gpio_desc *gpio_desc;
+};
+
+/* Wait for bitmask in a register to get set or cleared.
+ * timeout is in units of ten-microseconds.
+ */
+static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
+			  int timeout)
+{
+	int i;
+	u32 val;
+
+	for (i = 0; i < timeout; i++) {
+		val = bcma_read32(dev, reg);
+		if ((val & bitmask) == bitmask)
+			return 0;
+		udelay(10);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void bcma_hcd_4716wa(struct bcma_device *dev)
+{
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+	/* Work around for 4716 failures. */
+	if (dev->bus->chipinfo.id == 0x4716) {
+		u32 tmp;
+
+		tmp = bcma_cpu_clock(&dev->bus->drv_mips);
+		if (tmp >= 480000000)
+			tmp = 0x1846b; /* set CDR to 0x11(fast) */
+		else if (tmp == 453000000)
+			tmp = 0x1046b; /* set CDR to 0x10(slow) */
+		else
+			tmp = 0;
+
+		/* Change Shim mdio control reg to fix host not acking at
+		 * high frequencies
+		 */
+		if (tmp) {
+			bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
+			udelay(500);
+
+			bcma_write32(dev, 0x524, tmp);
+			udelay(500);
+			bcma_write32(dev, 0x524, 0x4ab);
+			udelay(500);
+			bcma_read32(dev, 0x528);
+			bcma_write32(dev, 0x528, 0x80000000);
+		}
+	}
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+}
+
+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
+static void bcma_hcd_init_chip_mips(struct bcma_device *dev)
+{
+	u32 tmp;
+
+	/*
+	 * USB 2.0 special considerations:
+	 *
+	 * 1. Since the core supports both OHCI and EHCI functions, it must
+	 *    only be reset once.
+	 *
+	 * 2. In addition to the standard SI reset sequence, the Host Control
+	 *    Register must be programmed to bring the USB core and various
+	 *    phy components out of reset.
+	 */
+	if (!bcma_core_is_enabled(dev)) {
+		bcma_core_enable(dev, 0);
+		mdelay(10);
+		if (dev->id.rev >= 5) {
+			/* Enable Misc PLL */
+			tmp = bcma_read32(dev, 0x1e0);
+			tmp |= 0x100;
+			bcma_write32(dev, 0x1e0, tmp);
+			if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
+				printk(KERN_EMERG "Failed to enable misc PPL!\n");
+
+			/* Take out of resets */
+			bcma_write32(dev, 0x200, 0x4ff);
+			udelay(25);
+			bcma_write32(dev, 0x200, 0x6ff);
+			udelay(25);
+
+			/* Make sure digital and AFE are locked in USB PHY */
+			bcma_write32(dev, 0x524, 0x6b);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0xab);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0x2b);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0x10ab);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+
+			if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
+				tmp = bcma_read32(dev, 0x528);
+				printk(KERN_EMERG
+				       "USB20H mdio_rddata 0x%08x\n", tmp);
+			}
+			bcma_write32(dev, 0x528, 0x80000000);
+			tmp = bcma_read32(dev, 0x314);
+			udelay(265);
+			bcma_write32(dev, 0x200, 0x7ff);
+			udelay(10);
+
+			/* Take USB and HSIC out of non-driving modes */
+			bcma_write32(dev, 0x510, 0);
+		} else {
+			bcma_write32(dev, 0x200, 0x7ff);
+
+			udelay(1);
+		}
+
+		bcma_hcd_4716wa(dev);
+	}
+}
+
+/*
+ * bcma_hcd_usb20_old_arm_init - Initialize old USB 2.0 controller on ARM
+ *
+ * Old USB 2.0 core is identified as BCMA_CORE_USB20_HOST and was introduced
+ * long before Northstar devices. It seems some cheaper chipsets like BCM53573
+ * still use it.
+ * Initialization of this old core differs between MIPS and ARM.
+ */
+static int bcma_hcd_usb20_old_arm_init(struct bcma_hcd_device *usb_dev)
+{
+	struct bcma_device *core = usb_dev->core;
+	struct device *dev = &core->dev;
+	struct bcma_device *pmu_core;
+
+	usleep_range(10000, 20000);
+	if (core->id.rev < 5)
+		return 0;
+
+	pmu_core = bcma_find_core(core->bus, BCMA_CORE_PMU);
+	if (!pmu_core) {
+		dev_err(dev, "Could not find PMU core\n");
+		return -ENOENT;
+	}
+
+	/* Take USB core out of reset */
+	bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK | BCMA_IOCTL_FGC);
+	usleep_range(100, 200);
+	bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+	usleep_range(100, 200);
+	bcma_awrite32(core, BCMA_RESET_CTL, 0);
+	usleep_range(100, 200);
+	bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK);
+	usleep_range(100, 200);
+
+	/* Enable Misc PLL */
+	bcma_write32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT |
+					  BCMA_CLKCTLST_HQCLKREQ |
+					  USB_BCMA_CLKCTLST_USB_CLK_REQ);
+	usleep_range(100, 200);
+
+	bcma_write32(core, 0x510, 0xc7f85000);
+	bcma_write32(core, 0x510, 0xc7f85003);
+	usleep_range(300, 600);
+
+	/* Program USB PHY PLL parameters */
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x6);
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x005360c1);
+	usleep_range(100, 200);
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x7);
+	bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x0);
+	usleep_range(100, 200);
+	bcma_set32(pmu_core, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
+	usleep_range(100, 200);
+
+	bcma_write32(core, 0x510, 0x7f8d007);
+	udelay(1000);
+
+	/* Take controller out of reset */
+	bcma_write32(core, 0x200, 0x4ff);
+	usleep_range(25, 50);
+	bcma_write32(core, 0x200, 0x6ff);
+	usleep_range(25, 50);
+	bcma_write32(core, 0x200, 0x7ff);
+	usleep_range(25, 50);
+
+	of_platform_default_populate(dev->of_node, NULL, dev);
+
+	return 0;
+}
+
+static void bcma_hcd_usb20_ns_init_hc(struct bcma_device *dev)
+{
+	u32 val;
+
+	/* Set packet buffer OUT threshold */
+	val = bcma_read32(dev, 0x94);
+	val &= 0xffff;
+	val |= 0x80 << 16;
+	bcma_write32(dev, 0x94, val);
+
+	/* Enable break memory transfer */
+	val = bcma_read32(dev, 0x9c);
+	val |= 1;
+	bcma_write32(dev, 0x9c, val);
+
+	/*
+	 * Broadcom initializes PHY and then waits to ensure HC is ready to be
+	 * configured. In our case the order is reversed. We just initialized
+	 * controller and we let HCD initialize PHY, so let's wait (sleep) now.
+	 */
+	usleep_range(1000, 2000);
+}
+
+/*
+ * bcma_hcd_usb20_ns_init - Initialize Northstar USB 2.0 controller
+ */
+static int bcma_hcd_usb20_ns_init(struct bcma_hcd_device *bcma_hcd)
+{
+	struct bcma_device *core = bcma_hcd->core;
+	struct bcma_chipinfo *ci = &core->bus->chipinfo;
+	struct device *dev = &core->dev;
+
+	bcma_core_enable(core, 0);
+
+	if (ci->id == BCMA_CHIP_ID_BCM4707 ||
+	    ci->id == BCMA_CHIP_ID_BCM53018)
+		bcma_hcd_usb20_ns_init_hc(core);
+
+	of_platform_default_populate(dev->of_node, NULL, dev);
+
+	return 0;
+}
+
+static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
+{
+	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
+
+	if (!usb_dev->gpio_desc)
+		return;
+
+	gpiod_set_value(usb_dev->gpio_desc, val);
+}
+
+static const struct usb_ehci_pdata ehci_pdata = {
+};
+
+static const struct usb_ohci_pdata ohci_pdata = {
+};
+
+static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev,
+						    const char *name, u32 addr,
+						    const void *data,
+						    size_t size)
+{
+	struct platform_device *hci_dev;
+	struct resource hci_res[2];
+	int ret;
+
+	memset(hci_res, 0, sizeof(hci_res));
+
+	hci_res[0].start = addr;
+	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
+	hci_res[0].flags = IORESOURCE_MEM;
+
+	hci_res[1].start = dev->irq;
+	hci_res[1].flags = IORESOURCE_IRQ;
+
+	hci_dev = platform_device_alloc(name, 0);
+	if (!hci_dev)
+		return ERR_PTR(-ENOMEM);
+
+	hci_dev->dev.parent = &dev->dev;
+	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
+
+	ret = platform_device_add_resources(hci_dev, hci_res,
+					    ARRAY_SIZE(hci_res));
+	if (ret)
+		goto err_alloc;
+	if (data)
+		ret = platform_device_add_data(hci_dev, data, size);
+	if (ret)
+		goto err_alloc;
+	ret = platform_device_add(hci_dev);
+	if (ret)
+		goto err_alloc;
+
+	return hci_dev;
+
+err_alloc:
+	platform_device_put(hci_dev);
+	return ERR_PTR(ret);
+}
+
+static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev)
+{
+	struct bcma_device *dev = usb_dev->core;
+	struct bcma_chipinfo *chipinfo = &dev->bus->chipinfo;
+	u32 ohci_addr;
+	int err;
+
+	if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
+		return -EOPNOTSUPP;
+
+	bcma_hcd_init_chip_mips(dev);
+
+	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
+	ohci_addr = dev->addr_s[0];
+	if ((chipinfo->id == BCMA_CHIP_ID_BCM5357 ||
+	     chipinfo->id == BCMA_CHIP_ID_BCM4749)
+	    && chipinfo->rev == 0)
+		ohci_addr = 0x18009000;
+
+	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
+						 ohci_addr, &ohci_pdata,
+						 sizeof(ohci_pdata));
+	if (IS_ERR(usb_dev->ohci_dev))
+		return PTR_ERR(usb_dev->ohci_dev);
+
+	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
+						 dev->addr, &ehci_pdata,
+						 sizeof(ehci_pdata));
+	if (IS_ERR(usb_dev->ehci_dev)) {
+		err = PTR_ERR(usb_dev->ehci_dev);
+		goto err_unregister_ohci_dev;
+	}
+
+	return 0;
+
+err_unregister_ohci_dev:
+	platform_device_unregister(usb_dev->ohci_dev);
+	return err;
+}
+
+static int bcma_hcd_usb30_init(struct bcma_hcd_device *bcma_hcd)
+{
+	struct bcma_device *core = bcma_hcd->core;
+	struct device *dev = &core->dev;
+
+	bcma_core_enable(core, 0);
+
+	of_platform_default_populate(dev->of_node, NULL, dev);
+
+	return 0;
+}
+
+static int bcma_hcd_probe(struct bcma_device *core)
+{
+	int err;
+	struct bcma_hcd_device *usb_dev;
+
+	/* TODO: Probably need checks here; is the core connected? */
+
+	usb_dev = devm_kzalloc(&core->dev, sizeof(struct bcma_hcd_device),
+			       GFP_KERNEL);
+	if (!usb_dev)
+		return -ENOMEM;
+	usb_dev->core = core;
+
+	usb_dev->gpio_desc = devm_gpiod_get_optional(&core->dev, "vcc",
+						     GPIOD_OUT_HIGH);
+	if (IS_ERR(usb_dev->gpio_desc))
+		return dev_err_probe(&core->dev, PTR_ERR(usb_dev->gpio_desc),
+				     "error obtaining VCC GPIO");
+
+	switch (core->id.id) {
+	case BCMA_CORE_USB20_HOST:
+		if (IS_ENABLED(CONFIG_ARM))
+			err = bcma_hcd_usb20_old_arm_init(usb_dev);
+		else if (IS_ENABLED(CONFIG_MIPS))
+			err = bcma_hcd_usb20_init(usb_dev);
+		else
+			err = -ENOTSUPP;
+		break;
+	case BCMA_CORE_NS_USB20:
+		err = bcma_hcd_usb20_ns_init(usb_dev);
+		break;
+	case BCMA_CORE_NS_USB30:
+		err = bcma_hcd_usb30_init(usb_dev);
+		break;
+	default:
+		return -ENODEV;
+	}
+	if (err)
+		return err;
+
+	bcma_set_drvdata(core, usb_dev);
+	return 0;
+}
+
+static void bcma_hcd_remove(struct bcma_device *dev)
+{
+	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
+	struct platform_device *ohci_dev = usb_dev->ohci_dev;
+	struct platform_device *ehci_dev = usb_dev->ehci_dev;
+
+	if (ohci_dev)
+		platform_device_unregister(ohci_dev);
+	if (ehci_dev)
+		platform_device_unregister(ehci_dev);
+
+	bcma_core_disable(dev, 0);
+}
+
+static void bcma_hcd_shutdown(struct bcma_device *dev)
+{
+	bcma_hci_platform_power_gpio(dev, false);
+	bcma_core_disable(dev, 0);
+}
+
+#ifdef CONFIG_PM
+
+static int bcma_hcd_suspend(struct bcma_device *dev)
+{
+	bcma_hci_platform_power_gpio(dev, false);
+	bcma_core_disable(dev, 0);
+
+	return 0;
+}
+
+static int bcma_hcd_resume(struct bcma_device *dev)
+{
+	bcma_hci_platform_power_gpio(dev, true);
+	bcma_core_enable(dev, 0);
+
+	return 0;
+}
+
+#else /* !CONFIG_PM */
+#define bcma_hcd_suspend	NULL
+#define bcma_hcd_resume	NULL
+#endif /* CONFIG_PM */
+
+static const struct bcma_device_id bcma_hcd_table[] = {
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB30, BCMA_ANY_REV, BCMA_ANY_CLASS),
+	{},
+};
+MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
+
+static struct bcma_driver bcma_hcd_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= bcma_hcd_table,
+	.probe		= bcma_hcd_probe,
+	.remove		= bcma_hcd_remove,
+	.shutdown	= bcma_hcd_shutdown,
+	.suspend	= bcma_hcd_suspend,
+	.resume		= bcma_hcd_resume,
+};
+module_bcma_driver(bcma_hcd_driver);