Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2624 insertions, 0 deletions

diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c
new file mode 100644
index 000000000..c0881d39d
--- /dev/null
+++ b/fs/ntfs/attrib.c
@@ -0,0 +1,2624 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/**
+ * attrib.c - NTFS attribute operations.  Part of the Linux-NTFS project.
+ *
+ * Copyright (c) 2001-2012 Anton Altaparmakov and Tuxera Inc.
+ * Copyright (c) 2002 Richard Russon
+ */
+
+#include <linux/buffer_head.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/swap.h>
+#include <linux/writeback.h>
+
+#include "attrib.h"
+#include "debug.h"
+#include "layout.h"
+#include "lcnalloc.h"
+#include "malloc.h"
+#include "mft.h"
+#include "ntfs.h"
+#include "types.h"
+
+/**
+ * ntfs_map_runlist_nolock - map (a part of) a runlist of an ntfs inode
+ * @ni:		ntfs inode for which to map (part of) a runlist
+ * @vcn:	map runlist part containing this vcn
+ * @ctx:	active attribute search context if present or NULL if not
+ *
+ * Map the part of a runlist containing the @vcn of the ntfs inode @ni.
+ *
+ * If @ctx is specified, it is an active search context of @ni and its base mft
+ * record.  This is needed when ntfs_map_runlist_nolock() encounters unmapped
+ * runlist fragments and allows their mapping.  If you do not have the mft
+ * record mapped, you can specify @ctx as NULL and ntfs_map_runlist_nolock()
+ * will perform the necessary mapping and unmapping.
+ *
+ * Note, ntfs_map_runlist_nolock() saves the state of @ctx on entry and
+ * restores it before returning.  Thus, @ctx will be left pointing to the same
+ * attribute on return as on entry.  However, the actual pointers in @ctx may
+ * point to different memory locations on return, so you must remember to reset
+ * any cached pointers from the @ctx, i.e. after the call to
+ * ntfs_map_runlist_nolock(), you will probably want to do:
+ *	m = ctx->mrec;
+ *	a = ctx->attr;
+ * Assuming you cache ctx->attr in a variable @a of type ATTR_RECORD * and that
+ * you cache ctx->mrec in a variable @m of type MFT_RECORD *.
+ *
+ * Return 0 on success and -errno on error.  There is one special error code
+ * which is not an error as such.  This is -ENOENT.  It means that @vcn is out
+ * of bounds of the runlist.
+ *
+ * Note the runlist can be NULL after this function returns if @vcn is zero and
+ * the attribute has zero allocated size, i.e. there simply is no runlist.
+ *
+ * WARNING: If @ctx is supplied, regardless of whether success or failure is
+ *	    returned, you need to check IS_ERR(@ctx->mrec) and if 'true' the @ctx
+ *	    is no longer valid, i.e. you need to either call
+ *	    ntfs_attr_reinit_search_ctx() or ntfs_attr_put_search_ctx() on it.
+ *	    In that case PTR_ERR(@ctx->mrec) will give you the error code for
+ *	    why the mapping of the old inode failed.
+ *
+ * Locking: - The runlist described by @ni must be locked for writing on entry
+ *	      and is locked on return.  Note the runlist will be modified.
+ *	    - If @ctx is NULL, the base mft record of @ni must not be mapped on
+ *	      entry and it will be left unmapped on return.
+ *	    - If @ctx is not NULL, the base mft record must be mapped on entry
+ *	      and it will be left mapped on return.
+ */
+int ntfs_map_runlist_nolock(ntfs_inode *ni, VCN vcn, ntfs_attr_search_ctx *ctx)
+{
+	VCN end_vcn;
+	unsigned long flags;
+	ntfs_inode *base_ni;
+	MFT_RECORD *m;
+	ATTR_RECORD *a;
+	runlist_element *rl;
+	struct page *put_this_page = NULL;
+	int err = 0;
+	bool ctx_is_temporary, ctx_needs_reset;
+	ntfs_attr_search_ctx old_ctx = { NULL, };
+
+	ntfs_debug("Mapping runlist part containing vcn 0x%llx.",
+			(unsigned long long)vcn);
+	if (!NInoAttr(ni))
+		base_ni = ni;
+	else
+		base_ni = ni->ext.base_ntfs_ino;
+	if (!ctx) {
+		ctx_is_temporary = ctx_needs_reset = true;
+		m = map_mft_record(base_ni);
+		if (IS_ERR(m))
+			return PTR_ERR(m);
+		ctx = ntfs_attr_get_search_ctx(base_ni, m);
+		if (unlikely(!ctx)) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+	} else {
+		VCN allocated_size_vcn;
+
+		BUG_ON(IS_ERR(ctx->mrec));
+		a = ctx->attr;
+		BUG_ON(!a->non_resident);
+		ctx_is_temporary = false;
+		end_vcn = sle64_to_cpu(a->data.non_resident.highest_vcn);
+		read_lock_irqsave(&ni->size_lock, flags);
+		allocated_size_vcn = ni->allocated_size >>
+				ni->vol->cluster_size_bits;
+		read_unlock_irqrestore(&ni->size_lock, flags);
+		if (!a->data.non_resident.lowest_vcn && end_vcn <= 0)
+			end_vcn = allocated_size_vcn - 1;
+		/*
+		 * If we already have the attribute extent containing @vcn in
+		 * @ctx, no need to look it up again.  We slightly cheat in
+		 * that if vcn exceeds the allocated size, we will refuse to
+		 * map the runlist below, so there is definitely no need to get
+		 * the right attribute extent.
+		 */
+		if (vcn >= allocated_size_vcn || (a->type == ni->type &&
+				a->name_length == ni->name_len &&
+				!memcmp((u8*)a + le16_to_cpu(a->name_offset),
+				ni->name, ni->name_len) &&
+				sle64_to_cpu(a->data.non_resident.lowest_vcn)
+				<= vcn && end_vcn >= vcn))
+			ctx_needs_reset = false;
+		else {
+			/* Save the old search context. */
+			old_ctx = *ctx;
+			/*
+			 * If the currently mapped (extent) inode is not the
+			 * base inode we will unmap it when we reinitialize the
+			 * search context which means we need to get a
+			 * reference to the page containing the mapped mft
+			 * record so we do not accidentally drop changes to the
+			 * mft record when it has not been marked dirty yet.
+			 */
+			if (old_ctx.base_ntfs_ino && old_ctx.ntfs_ino !=
+					old_ctx.base_ntfs_ino) {
+				put_this_page = old_ctx.ntfs_ino->page;
+				get_page(put_this_page);
+			}
+			/*
+			 * Reinitialize the search context so we can lookup the
+			 * needed attribute extent.
+			 */
+			ntfs_attr_reinit_search_ctx(ctx);
+			ctx_needs_reset = true;
+		}
+	}
+	if (ctx_needs_reset) {
+		err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+				CASE_SENSITIVE, vcn, NULL, 0, ctx);
+		if (unlikely(err)) {
+			if (err == -ENOENT)
+				err = -EIO;
+			goto err_out;
+		}
+		BUG_ON(!ctx->attr->non_resident);
+	}
+	a = ctx->attr;
+	/*
+	 * Only decompress the mapping pairs if @vcn is inside it.  Otherwise
+	 * we get into problems when we try to map an out of bounds vcn because
+	 * we then try to map the already mapped runlist fragment and
+	 * ntfs_mapping_pairs_decompress() fails.
+	 */
+	end_vcn = sle64_to_cpu(a->data.non_resident.highest_vcn) + 1;
+	if (unlikely(vcn && vcn >= end_vcn)) {
+		err = -ENOENT;
+		goto err_out;
+	}
+	rl = ntfs_mapping_pairs_decompress(ni->vol, a, ni->runlist.rl);
+	if (IS_ERR(rl))
+		err = PTR_ERR(rl);
+	else
+		ni->runlist.rl = rl;
+err_out:
+	if (ctx_is_temporary) {
+		if (likely(ctx))
+			ntfs_attr_put_search_ctx(ctx);
+		unmap_mft_record(base_ni);
+	} else if (ctx_needs_reset) {
+		/*
+		 * If there is no attribute list, restoring the search context
+		 * is accomplished simply by copying the saved context back over
+		 * the caller supplied context.  If there is an attribute list,
+		 * things are more complicated as we need to deal with mapping
+		 * of mft records and resulting potential changes in pointers.
+		 */
+		if (NInoAttrList(base_ni)) {
+			/*
+			 * If the currently mapped (extent) inode is not the
+			 * one we had before, we need to unmap it and map the
+			 * old one.
+			 */
+			if (ctx->ntfs_ino != old_ctx.ntfs_ino) {
+				/*
+				 * If the currently mapped inode is not the
+				 * base inode, unmap it.
+				 */
+				if (ctx->base_ntfs_ino && ctx->ntfs_ino !=
+						ctx->base_ntfs_ino) {
+					unmap_extent_mft_record(ctx->ntfs_ino);
+					ctx->mrec = ctx->base_mrec;
+					BUG_ON(!ctx->mrec);
+				}
+				/*
+				 * If the old mapped inode is not the base
+				 * inode, map it.
+				 */
+				if (old_ctx.base_ntfs_ino &&
+						old_ctx.ntfs_ino !=
+						old_ctx.base_ntfs_ino) {
+retry_map:
+					ctx->mrec = map_mft_record(
+							old_ctx.ntfs_ino);
+					/*
+					 * Something bad has happened.  If out
+					 * of memory retry till it succeeds.
+					 * Any other errors are fatal and we
+					 * return the error code in ctx->mrec.
+					 * Let the caller deal with it...  We
+					 * just need to fudge things so the
+					 * caller can reinit and/or put the
+					 * search context safely.
+					 */
+					if (IS_ERR(ctx->mrec)) {
+						if (PTR_ERR(ctx->mrec) ==
+								-ENOMEM) {
+							schedule();
+							goto retry_map;
+						} else
+							old_ctx.ntfs_ino =
+								old_ctx.
+								base_ntfs_ino;
+					}
+				}
+			}
+			/* Update the changed pointers in the saved context. */
+			if (ctx->mrec != old_ctx.mrec) {
+				if (!IS_ERR(ctx->mrec))
+					old_ctx.attr = (ATTR_RECORD*)(
+							(u8*)ctx->mrec +
+							((u8*)old_ctx.attr -
+							(u8*)old_ctx.mrec));
+				old_ctx.mrec = ctx->mrec;
+			}
+		}
+		/* Restore the search context to the saved one. */
+		*ctx = old_ctx;
+		/*
+		 * We drop the reference on the page we took earlier.  In the
+		 * case that IS_ERR(ctx->mrec) is true this means we might lose
+		 * some changes to the mft record that had been made between
+		 * the last time it was marked dirty/written out and now.  This
+		 * at this stage is not a problem as the mapping error is fatal
+		 * enough that the mft record cannot be written out anyway and
+		 * the caller is very likely to shutdown the whole inode
+		 * immediately and mark the volume dirty for chkdsk to pick up
+		 * the pieces anyway.
+		 */
+		if (put_this_page)
+			put_page(put_this_page);
+	}
+	return err;
+}
+
+/**
+ * ntfs_map_runlist - map (a part of) a runlist of an ntfs inode
+ * @ni:		ntfs inode for which to map (part of) a runlist
+ * @vcn:	map runlist part containing this vcn
+ *
+ * Map the part of a runlist containing the @vcn of the ntfs inode @ni.
+ *
+ * Return 0 on success and -errno on error.  There is one special error code
+ * which is not an error as such.  This is -ENOENT.  It means that @vcn is out
+ * of bounds of the runlist.
+ *
+ * Locking: - The runlist must be unlocked on entry and is unlocked on return.
+ *	    - This function takes the runlist lock for writing and may modify
+ *	      the runlist.
+ */
+int ntfs_map_runlist(ntfs_inode *ni, VCN vcn)
+{
+	int err = 0;
+
+	down_write(&ni->runlist.lock);
+	/* Make sure someone else didn't do the work while we were sleeping. */
+	if (likely(ntfs_rl_vcn_to_lcn(ni->runlist.rl, vcn) <=
+			LCN_RL_NOT_MAPPED))
+		err = ntfs_map_runlist_nolock(ni, vcn, NULL);
+	up_write(&ni->runlist.lock);
+	return err;
+}
+
+/**
+ * ntfs_attr_vcn_to_lcn_nolock - convert a vcn into a lcn given an ntfs inode
+ * @ni:			ntfs inode of the attribute whose runlist to search
+ * @vcn:		vcn to convert
+ * @write_locked:	true if the runlist is locked for writing
+ *
+ * Find the virtual cluster number @vcn in the runlist of the ntfs attribute
+ * described by the ntfs inode @ni and return the corresponding logical cluster
+ * number (lcn).
+ *
+ * If the @vcn is not mapped yet, the attempt is made to map the attribute
+ * extent containing the @vcn and the vcn to lcn conversion is retried.
+ *
+ * If @write_locked is true the caller has locked the runlist for writing and
+ * if false for reading.
+ *
+ * Since lcns must be >= 0, we use negative return codes with special meaning:
+ *
+ * Return code	Meaning / Description
+ * ==========================================
+ *  LCN_HOLE	Hole / not allocated on disk.
+ *  LCN_ENOENT	There is no such vcn in the runlist, i.e. @vcn is out of bounds.
+ *  LCN_ENOMEM	Not enough memory to map runlist.
+ *  LCN_EIO	Critical error (runlist/file is corrupt, i/o error, etc).
+ *
+ * Locking: - The runlist must be locked on entry and is left locked on return.
+ *	    - If @write_locked is 'false', i.e. the runlist is locked for reading,
+ *	      the lock may be dropped inside the function so you cannot rely on
+ *	      the runlist still being the same when this function returns.
+ */
+LCN ntfs_attr_vcn_to_lcn_nolock(ntfs_inode *ni, const VCN vcn,
+		const bool write_locked)
+{
+	LCN lcn;
+	unsigned long flags;
+	bool is_retry = false;
+
+	BUG_ON(!ni);
+	ntfs_debug("Entering for i_ino 0x%lx, vcn 0x%llx, %s_locked.",
+			ni->mft_no, (unsigned long long)vcn,
+			write_locked ? "write" : "read");
+	BUG_ON(!NInoNonResident(ni));
+	BUG_ON(vcn < 0);
+	if (!ni->runlist.rl) {
+		read_lock_irqsave(&ni->size_lock, flags);
+		if (!ni->allocated_size) {
+			read_unlock_irqrestore(&ni->size_lock, flags);
+			return LCN_ENOENT;
+		}
+		read_unlock_irqrestore(&ni->size_lock, flags);
+	}
+retry_remap:
+	/* Convert vcn to lcn.  If that fails map the runlist and retry once. */
+	lcn = ntfs_rl_vcn_to_lcn(ni->runlist.rl, vcn);
+	if (likely(lcn >= LCN_HOLE)) {
+		ntfs_debug("Done, lcn 0x%llx.", (long long)lcn);
+		return lcn;
+	}
+	if (lcn != LCN_RL_NOT_MAPPED) {
+		if (lcn != LCN_ENOENT)
+			lcn = LCN_EIO;
+	} else if (!is_retry) {
+		int err;
+
+		if (!write_locked) {
+			up_read(&ni->runlist.lock);
+			down_write(&ni->runlist.lock);
+			if (unlikely(ntfs_rl_vcn_to_lcn(ni->runlist.rl, vcn) !=
+					LCN_RL_NOT_MAPPED)) {
+				up_write(&ni->runlist.lock);
+				down_read(&ni->runlist.lock);
+				goto retry_remap;
+			}
+		}
+		err = ntfs_map_runlist_nolock(ni, vcn, NULL);
+		if (!write_locked) {
+			up_write(&ni->runlist.lock);
+			down_read(&ni->runlist.lock);
+		}
+		if (likely(!err)) {
+			is_retry = true;
+			goto retry_remap;
+		}
+		if (err == -ENOENT)
+			lcn = LCN_ENOENT;
+		else if (err == -ENOMEM)
+			lcn = LCN_ENOMEM;
+		else
+			lcn = LCN_EIO;
+	}
+	if (lcn != LCN_ENOENT)
+		ntfs_error(ni->vol->sb, "Failed with error code %lli.",
+				(long long)lcn);
+	return lcn;
+}
+
+/**
+ * ntfs_attr_find_vcn_nolock - find a vcn in the runlist of an ntfs inode
+ * @ni:		ntfs inode describing the runlist to search
+ * @vcn:	vcn to find
+ * @ctx:	active attribute search context if present or NULL if not
+ *
+ * Find the virtual cluster number @vcn in the runlist described by the ntfs
+ * inode @ni and return the address of the runlist element containing the @vcn.
+ *
+ * If the @vcn is not mapped yet, the attempt is made to map the attribute
+ * extent containing the @vcn and the vcn to lcn conversion is retried.
+ *
+ * If @ctx is specified, it is an active search context of @ni and its base mft
+ * record.  This is needed when ntfs_attr_find_vcn_nolock() encounters unmapped
+ * runlist fragments and allows their mapping.  If you do not have the mft
+ * record mapped, you can specify @ctx as NULL and ntfs_attr_find_vcn_nolock()
+ * will perform the necessary mapping and unmapping.
+ *
+ * Note, ntfs_attr_find_vcn_nolock() saves the state of @ctx on entry and
+ * restores it before returning.  Thus, @ctx will be left pointing to the same
+ * attribute on return as on entry.  However, the actual pointers in @ctx may
+ * point to different memory locations on return, so you must remember to reset
+ * any cached pointers from the @ctx, i.e. after the call to
+ * ntfs_attr_find_vcn_nolock(), you will probably want to do:
+ *	m = ctx->mrec;
+ *	a = ctx->attr;
+ * Assuming you cache ctx->attr in a variable @a of type ATTR_RECORD * and that
+ * you cache ctx->mrec in a variable @m of type MFT_RECORD *.
+ * Note you need to distinguish between the lcn of the returned runlist element
+ * being >= 0 and LCN_HOLE.  In the later case you have to return zeroes on
+ * read and allocate clusters on write.
+ *
+ * Return the runlist element containing the @vcn on success and
+ * ERR_PTR(-errno) on error.  You need to test the return value with IS_ERR()
+ * to decide if the return is success or failure and PTR_ERR() to get to the
+ * error code if IS_ERR() is true.
+ *
+ * The possible error return codes are:
+ *	-ENOENT - No such vcn in the runlist, i.e. @vcn is out of bounds.
+ *	-ENOMEM - Not enough memory to map runlist.
+ *	-EIO	- Critical error (runlist/file is corrupt, i/o error, etc).
+ *
+ * WARNING: If @ctx is supplied, regardless of whether success or failure is
+ *	    returned, you need to check IS_ERR(@ctx->mrec) and if 'true' the @ctx
+ *	    is no longer valid, i.e. you need to either call
+ *	    ntfs_attr_reinit_search_ctx() or ntfs_attr_put_search_ctx() on it.
+ *	    In that case PTR_ERR(@ctx->mrec) will give you the error code for
+ *	    why the mapping of the old inode failed.
+ *
+ * Locking: - The runlist described by @ni must be locked for writing on entry
+ *	      and is locked on return.  Note the runlist may be modified when
+ *	      needed runlist fragments need to be mapped.
+ *	    - If @ctx is NULL, the base mft record of @ni must not be mapped on
+ *	      entry and it will be left unmapped on return.
+ *	    - If @ctx is not NULL, the base mft record must be mapped on entry
+ *	      and it will be left mapped on return.
+ */
+runlist_element *ntfs_attr_find_vcn_nolock(ntfs_inode *ni, const VCN vcn,
+		ntfs_attr_search_ctx *ctx)
+{
+	unsigned long flags;
+	runlist_element *rl;
+	int err = 0;
+	bool is_retry = false;
+
+	BUG_ON(!ni);
+	ntfs_debug("Entering for i_ino 0x%lx, vcn 0x%llx, with%s ctx.",
+			ni->mft_no, (unsigned long long)vcn, ctx ? "" : "out");
+	BUG_ON(!NInoNonResident(ni));
+	BUG_ON(vcn < 0);
+	if (!ni->runlist.rl) {
+		read_lock_irqsave(&ni->size_lock, flags);
+		if (!ni->allocated_size) {
+			read_unlock_irqrestore(&ni->size_lock, flags);
+			return ERR_PTR(-ENOENT);
+		}
+		read_unlock_irqrestore(&ni->size_lock, flags);
+	}
+retry_remap:
+	rl = ni->runlist.rl;
+	if (likely(rl && vcn >= rl[0].vcn)) {
+		while (likely(rl->length)) {
+			if (unlikely(vcn < rl[1].vcn)) {
+				if (likely(rl->lcn >= LCN_HOLE)) {
+					ntfs_debug("Done.");
+					return rl;
+				}
+				break;
+			}
+			rl++;
+		}
+		if (likely(rl->lcn != LCN_RL_NOT_MAPPED)) {
+			if (likely(rl->lcn == LCN_ENOENT))
+				err = -ENOENT;
+			else
+				err = -EIO;
+		}
+	}
+	if (!err && !is_retry) {
+		/*
+		 * If the search context is invalid we cannot map the unmapped
+		 * region.
+		 */
+		if (IS_ERR(ctx->mrec))
+			err = PTR_ERR(ctx->mrec);
+		else {
+			/*
+			 * The @vcn is in an unmapped region, map the runlist
+			 * and retry.
+			 */
+			err = ntfs_map_runlist_nolock(ni, vcn, ctx);
+			if (likely(!err)) {
+				is_retry = true;
+				goto retry_remap;
+			}
+		}
+		if (err == -EINVAL)
+			err = -EIO;
+	} else if (!err)
+		err = -EIO;
+	if (err != -ENOENT)
+		ntfs_error(ni->vol->sb, "Failed with error code %i.", err);
+	return ERR_PTR(err);
+}
+
+/**
+ * ntfs_attr_find - find (next) attribute in mft record
+ * @type:	attribute type to find
+ * @name:	attribute name to find (optional, i.e. NULL means don't care)
+ * @name_len:	attribute name length (only needed if @name present)
+ * @ic:		IGNORE_CASE or CASE_SENSITIVE (ignored if @name not present)
+ * @val:	attribute value to find (optional, resident attributes only)
+ * @val_len:	attribute value length
+ * @ctx:	search context with mft record and attribute to search from
+ *
+ * You should not need to call this function directly.  Use ntfs_attr_lookup()
+ * instead.
+ *
+ * ntfs_attr_find() takes a search context @ctx as parameter and searches the
+ * mft record specified by @ctx->mrec, beginning at @ctx->attr, for an
+ * attribute of @type, optionally @name and @val.
+ *
+ * If the attribute is found, ntfs_attr_find() returns 0 and @ctx->attr will
+ * point to the found attribute.
+ *
+ * If the attribute is not found, ntfs_attr_find() returns -ENOENT and
+ * @ctx->attr will point to the attribute before which the attribute being
+ * searched for would need to be inserted if such an action were to be desired.
+ *
+ * On actual error, ntfs_attr_find() returns -EIO.  In this case @ctx->attr is
+ * undefined and in particular do not rely on it not changing.
+ *
+ * If @ctx->is_first is 'true', the search begins with @ctx->attr itself.  If it
+ * is 'false', the search begins after @ctx->attr.
+ *
+ * If @ic is IGNORE_CASE, the @name comparisson is not case sensitive and
+ * @ctx->ntfs_ino must be set to the ntfs inode to which the mft record
+ * @ctx->mrec belongs.  This is so we can get at the ntfs volume and hence at
+ * the upcase table.  If @ic is CASE_SENSITIVE, the comparison is case
+ * sensitive.  When @name is present, @name_len is the @name length in Unicode
+ * characters.
+ *
+ * If @name is not present (NULL), we assume that the unnamed attribute is
+ * being searched for.
+ *
+ * Finally, the resident attribute value @val is looked for, if present.  If
+ * @val is not present (NULL), @val_len is ignored.
+ *
+ * ntfs_attr_find() only searches the specified mft record and it ignores the
+ * presence of an attribute list attribute (unless it is the one being searched
+ * for, obviously).  If you need to take attribute lists into consideration,
+ * use ntfs_attr_lookup() instead (see below).  This also means that you cannot
+ * use ntfs_attr_find() to search for extent records of non-resident
+ * attributes, as extents with lowest_vcn != 0 are usually described by the
+ * attribute list attribute only. - Note that it is possible that the first
+ * extent is only in the attribute list while the last extent is in the base
+ * mft record, so do not rely on being able to find the first extent in the
+ * base mft record.
+ *
+ * Warning: Never use @val when looking for attribute types which can be
+ *	    non-resident as this most likely will result in a crash!
+ */
+static int ntfs_attr_find(const ATTR_TYPE type, const ntfschar *name,
+		const u32 name_len, const IGNORE_CASE_BOOL ic,
+		const u8 *val, const u32 val_len, ntfs_attr_search_ctx *ctx)
+{
+	ATTR_RECORD *a;
+	ntfs_volume *vol = ctx->ntfs_ino->vol;
+	ntfschar *upcase = vol->upcase;
+	u32 upcase_len = vol->upcase_len;
+
+	/*
+	 * Iterate over attributes in mft record starting at @ctx->attr, or the
+	 * attribute following that, if @ctx->is_first is 'true'.
+	 */
+	if (ctx->is_first) {
+		a = ctx->attr;
+		ctx->is_first = false;
+	} else
+		a = (ATTR_RECORD*)((u8*)ctx->attr +
+				le32_to_cpu(ctx->attr->length));
+	for (;;	a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length))) {
+		u8 *mrec_end = (u8 *)ctx->mrec +
+		               le32_to_cpu(ctx->mrec->bytes_allocated);
+		u8 *name_end;
+
+		/* check whether ATTR_RECORD wrap */
+		if ((u8 *)a < (u8 *)ctx->mrec)
+			break;
+
+		/* check whether Attribute Record Header is within bounds */
+		if ((u8 *)a > mrec_end ||
+		    (u8 *)a + sizeof(ATTR_RECORD) > mrec_end)
+			break;
+
+		/* check whether ATTR_RECORD's name is within bounds */
+		name_end = (u8 *)a + le16_to_cpu(a->name_offset) +
+			   a->name_length * sizeof(ntfschar);
+		if (name_end > mrec_end)
+			break;
+
+		ctx->attr = a;
+		if (unlikely(le32_to_cpu(a->type) > le32_to_cpu(type) ||
+				a->type == AT_END))
+			return -ENOENT;
+		if (unlikely(!a->length))
+			break;
+
+		/* check whether ATTR_RECORD's length wrap */
+		if ((u8 *)a + le32_to_cpu(a->length) < (u8 *)a)
+			break;
+		/* check whether ATTR_RECORD's length is within bounds */
+		if ((u8 *)a + le32_to_cpu(a->length) > mrec_end)
+			break;
+
+		if (a->type != type)
+			continue;
+		/*
+		 * If @name is present, compare the two names.  If @name is
+		 * missing, assume we want an unnamed attribute.
+		 */
+		if (!name) {
+			/* The search failed if the found attribute is named. */
+			if (a->name_length)
+				return -ENOENT;
+		} else if (!ntfs_are_names_equal(name, name_len,
+			    (ntfschar*)((u8*)a + le16_to_cpu(a->name_offset)),
+			    a->name_length, ic, upcase, upcase_len)) {
+			register int rc;
+
+			rc = ntfs_collate_names(name, name_len,
+					(ntfschar*)((u8*)a +
+					le16_to_cpu(a->name_offset)),
+					a->name_length, 1, IGNORE_CASE,
+					upcase, upcase_len);
+			/*
+			 * If @name collates before a->name, there is no
+			 * matching attribute.
+			 */
+			if (rc == -1)
+				return -ENOENT;
+			/* If the strings are not equal, continue search. */
+			if (rc)
+				continue;
+			rc = ntfs_collate_names(name, name_len,
+					(ntfschar*)((u8*)a +
+					le16_to_cpu(a->name_offset)),
+					a->name_length, 1, CASE_SENSITIVE,
+					upcase, upcase_len);
+			if (rc == -1)
+				return -ENOENT;
+			if (rc)
+				continue;
+		}
+		/*
+		 * The names match or @name not present and attribute is
+		 * unnamed.  If no @val specified, we have found the attribute
+		 * and are done.
+		 */
+		if (!val)
+			return 0;
+		/* @val is present; compare values. */
+		else {
+			register int rc;
+
+			rc = memcmp(val, (u8*)a + le16_to_cpu(
+					a->data.resident.value_offset),
+					min_t(u32, val_len, le32_to_cpu(
+					a->data.resident.value_length)));
+			/*
+			 * If @val collates before the current attribute's
+			 * value, there is no matching attribute.
+			 */
+			if (!rc) {
+				register u32 avl;
+
+				avl = le32_to_cpu(
+						a->data.resident.value_length);
+				if (val_len == avl)
+					return 0;
+				if (val_len < avl)
+					return -ENOENT;
+			} else if (rc < 0)
+				return -ENOENT;
+		}
+	}
+	ntfs_error(vol->sb, "Inode is corrupt.  Run chkdsk.");
+	NVolSetErrors(vol);
+	return -EIO;
+}
+
+/**
+ * load_attribute_list - load an attribute list into memory
+ * @vol:		ntfs volume from which to read
+ * @runlist:		runlist of the attribute list
+ * @al_start:		destination buffer
+ * @size:		size of the destination buffer in bytes
+ * @initialized_size:	initialized size of the attribute list
+ *
+ * Walk the runlist @runlist and load all clusters from it copying them into
+ * the linear buffer @al. The maximum number of bytes copied to @al is @size
+ * bytes. Note, @size does not need to be a multiple of the cluster size. If
+ * @initialized_size is less than @size, the region in @al between
+ * @initialized_size and @size will be zeroed and not read from disk.
+ *
+ * Return 0 on success or -errno on error.
+ */
+int load_attribute_list(ntfs_volume *vol, runlist *runlist, u8 *al_start,
+		const s64 size, const s64 initialized_size)
+{
+	LCN lcn;
+	u8 *al = al_start;
+	u8 *al_end = al + initialized_size;
+	runlist_element *rl;
+	struct buffer_head *bh;
+	struct super_block *sb;
+	unsigned long block_size;
+	unsigned long block, max_block;
+	int err = 0;
+	unsigned char block_size_bits;
+
+	ntfs_debug("Entering.");
+	if (!vol || !runlist || !al || size <= 0 || initialized_size < 0 ||
+			initialized_size > size)
+		return -EINVAL;
+	if (!initialized_size) {
+		memset(al, 0, size);
+		return 0;
+	}
+	sb = vol->sb;
+	block_size = sb->s_blocksize;
+	block_size_bits = sb->s_blocksize_bits;
+	down_read(&runlist->lock);
+	rl = runlist->rl;
+	if (!rl) {
+		ntfs_error(sb, "Cannot read attribute list since runlist is "
+				"missing.");
+		goto err_out;	
+	}
+	/* Read all clusters specified by the runlist one run at a time. */
+	while (rl->length) {
+		lcn = ntfs_rl_vcn_to_lcn(rl, rl->vcn);
+		ntfs_debug("Reading vcn = 0x%llx, lcn = 0x%llx.",
+				(unsigned long long)rl->vcn,
+				(unsigned long long)lcn);
+		/* The attribute list cannot be sparse. */
+		if (lcn < 0) {
+			ntfs_error(sb, "ntfs_rl_vcn_to_lcn() failed.  Cannot "
+					"read attribute list.");
+			goto err_out;
+		}
+		block = lcn << vol->cluster_size_bits >> block_size_bits;
+		/* Read the run from device in chunks of block_size bytes. */
+		max_block = block + (rl->length << vol->cluster_size_bits >>
+				block_size_bits);
+		ntfs_debug("max_block = 0x%lx.", max_block);
+		do {
+			ntfs_debug("Reading block = 0x%lx.", block);
+			bh = sb_bread(sb, block);
+			if (!bh) {
+				ntfs_error(sb, "sb_bread() failed. Cannot "
+						"read attribute list.");
+				goto err_out;
+			}
+			if (al + block_size >= al_end)
+				goto do_final;
+			memcpy(al, bh->b_data, block_size);
+			brelse(bh);
+			al += block_size;
+		} while (++block < max_block);
+		rl++;
+	}
+	if (initialized_size < size) {
+initialize:
+		memset(al_start + initialized_size, 0, size - initialized_size);
+	}
+done:
+	up_read(&runlist->lock);
+	return err;
+do_final:
+	if (al < al_end) {
+		/*
+		 * Partial block.
+		 *
+		 * Note: The attribute list can be smaller than its allocation
+		 * by multiple clusters.  This has been encountered by at least
+		 * two people running Windows XP, thus we cannot do any
+		 * truncation sanity checking here. (AIA)
+		 */
+		memcpy(al, bh->b_data, al_end - al);
+		brelse(bh);
+		if (initialized_size < size)
+			goto initialize;
+		goto done;
+	}
+	brelse(bh);
+	/* Real overflow! */
+	ntfs_error(sb, "Attribute list buffer overflow. Read attribute list "
+			"is truncated.");
+err_out:
+	err = -EIO;
+	goto done;
+}
+
+/**
+ * ntfs_external_attr_find - find an attribute in the attribute list of an inode
+ * @type:	attribute type to find
+ * @name:	attribute name to find (optional, i.e. NULL means don't care)
+ * @name_len:	attribute name length (only needed if @name present)
+ * @ic:		IGNORE_CASE or CASE_SENSITIVE (ignored if @name not present)
+ * @lowest_vcn:	lowest vcn to find (optional, non-resident attributes only)
+ * @val:	attribute value to find (optional, resident attributes only)
+ * @val_len:	attribute value length
+ * @ctx:	search context with mft record and attribute to search from
+ *
+ * You should not need to call this function directly.  Use ntfs_attr_lookup()
+ * instead.
+ *
+ * Find an attribute by searching the attribute list for the corresponding
+ * attribute list entry.  Having found the entry, map the mft record if the
+ * attribute is in a different mft record/inode, ntfs_attr_find() the attribute
+ * in there and return it.
+ *
+ * On first search @ctx->ntfs_ino must be the base mft record and @ctx must
+ * have been obtained from a call to ntfs_attr_get_search_ctx().  On subsequent
+ * calls @ctx->ntfs_ino can be any extent inode, too (@ctx->base_ntfs_ino is
+ * then the base inode).
+ *
+ * After finishing with the attribute/mft record you need to call
+ * ntfs_attr_put_search_ctx() to cleanup the search context (unmapping any
+ * mapped inodes, etc).
+ *
+ * If the attribute is found, ntfs_external_attr_find() returns 0 and
+ * @ctx->attr will point to the found attribute.  @ctx->mrec will point to the
+ * mft record in which @ctx->attr is located and @ctx->al_entry will point to
+ * the attribute list entry for the attribute.
+ *
+ * If the attribute is not found, ntfs_external_attr_find() returns -ENOENT and
+ * @ctx->attr will point to the attribute in the base mft record before which
+ * the attribute being searched for would need to be inserted if such an action
+ * were to be desired.  @ctx->mrec will point to the mft record in which
+ * @ctx->attr is located and @ctx->al_entry will point to the attribute list
+ * entry of the attribute before which the attribute being searched for would
+ * need to be inserted if such an action were to be desired.
+ *
+ * Thus to insert the not found attribute, one wants to add the attribute to
+ * @ctx->mrec (the base mft record) and if there is not enough space, the
+ * attribute should be placed in a newly allocated extent mft record.  The
+ * attribute list entry for the inserted attribute should be inserted in the
+ * attribute list attribute at @ctx->al_entry.
+ *
+ * On actual error, ntfs_external_attr_find() returns -EIO.  In this case
+ * @ctx->attr is undefined and in particular do not rely on it not changing.
+ */
+static int ntfs_external_attr_find(const ATTR_TYPE type,
+		const ntfschar *name, const u32 name_len,
+		const IGNORE_CASE_BOOL ic, const VCN lowest_vcn,
+		const u8 *val, const u32 val_len, ntfs_attr_search_ctx *ctx)
+{
+	ntfs_inode *base_ni, *ni;
+	ntfs_volume *vol;
+	ATTR_LIST_ENTRY *al_entry, *next_al_entry;
+	u8 *al_start, *al_end;
+	ATTR_RECORD *a;
+	ntfschar *al_name;
+	u32 al_name_len;
+	int err = 0;
+	static const char *es = " Unmount and run chkdsk.";
+
+	ni = ctx->ntfs_ino;
+	base_ni = ctx->base_ntfs_ino;
+	ntfs_debug("Entering for inode 0x%lx, type 0x%x.", ni->mft_no, type);
+	if (!base_ni) {
+		/* First call happens with the base mft record. */
+		base_ni = ctx->base_ntfs_ino = ctx->ntfs_ino;
+		ctx->base_mrec = ctx->mrec;
+	}
+	if (ni == base_ni)
+		ctx->base_attr = ctx->attr;
+	if (type == AT_END)
+		goto not_found;
+	vol = base_ni->vol;
+	al_start = base_ni->attr_list;
+	al_end = al_start + base_ni->attr_list_size;
+	if (!ctx->al_entry)
+		ctx->al_entry = (ATTR_LIST_ENTRY*)al_start;
+	/*
+	 * Iterate over entries in attribute list starting at @ctx->al_entry,
+	 * or the entry following that, if @ctx->is_first is 'true'.
+	 */
+	if (ctx->is_first) {
+		al_entry = ctx->al_entry;
+		ctx->is_first = false;
+	} else
+		al_entry = (ATTR_LIST_ENTRY*)((u8*)ctx->al_entry +
+				le16_to_cpu(ctx->al_entry->length));
+	for (;; al_entry = next_al_entry) {
+		/* Out of bounds check. */
+		if ((u8*)al_entry < base_ni->attr_list ||
+				(u8*)al_entry > al_end)
+			break;	/* Inode is corrupt. */
+		ctx->al_entry = al_entry;
+		/* Catch the end of the attribute list. */
+		if ((u8*)al_entry == al_end)
+			goto not_found;
+		if (!al_entry->length)
+			break;
+		if ((u8*)al_entry + 6 > al_end || (u8*)al_entry +
+				le16_to_cpu(al_entry->length) > al_end)
+			break;
+		next_al_entry = (ATTR_LIST_ENTRY*)((u8*)al_entry +
+				le16_to_cpu(al_entry->length));
+		if (le32_to_cpu(al_entry->type) > le32_to_cpu(type))
+			goto not_found;
+		if (type != al_entry->type)
+			continue;
+		/*
+		 * If @name is present, compare the two names.  If @name is
+		 * missing, assume we want an unnamed attribute.
+		 */
+		al_name_len = al_entry->name_length;
+		al_name = (ntfschar*)((u8*)al_entry + al_entry->name_offset);
+		if (!name) {
+			if (al_name_len)
+				goto not_found;
+		} else if (!ntfs_are_names_equal(al_name, al_name_len, name,
+				name_len, ic, vol->upcase, vol->upcase_len)) {
+			register int rc;
+
+			rc = ntfs_collate_names(name, name_len, al_name,
+					al_name_len, 1, IGNORE_CASE,
+					vol->upcase, vol->upcase_len);
+			/*
+			 * If @name collates before al_name, there is no
+			 * matching attribute.
+			 */
+			if (rc == -1)
+				goto not_found;
+			/* If the strings are not equal, continue search. */
+			if (rc)
+				continue;
+			/*
+			 * FIXME: Reverse engineering showed 0, IGNORE_CASE but
+			 * that is inconsistent with ntfs_attr_find().  The
+			 * subsequent rc checks were also different.  Perhaps I
+			 * made a mistake in one of the two.  Need to recheck
+			 * which is correct or at least see what is going on...
+			 * (AIA)
+			 */
+			rc = ntfs_collate_names(name, name_len, al_name,
+					al_name_len, 1, CASE_SENSITIVE,
+					vol->upcase, vol->upcase_len);
+			if (rc == -1)
+				goto not_found;
+			if (rc)
+				continue;
+		}
+		/*
+		 * The names match or @name not present and attribute is
+		 * unnamed.  Now check @lowest_vcn.  Continue search if the
+		 * next attribute list entry still fits @lowest_vcn.  Otherwise
+		 * we have reached the right one or the search has failed.
+		 */
+		if (lowest_vcn && (u8*)next_al_entry >= al_start	    &&
+				(u8*)next_al_entry + 6 < al_end		    &&
+				(u8*)next_al_entry + le16_to_cpu(
+					next_al_entry->length) <= al_end    &&
+				sle64_to_cpu(next_al_entry->lowest_vcn) <=
+					lowest_vcn			    &&
+				next_al_entry->type == al_entry->type	    &&
+				next_al_entry->name_length == al_name_len   &&
+				ntfs_are_names_equal((ntfschar*)((u8*)
+					next_al_entry +
+					next_al_entry->name_offset),
+					next_al_entry->name_length,
+					al_name, al_name_len, CASE_SENSITIVE,
+					vol->upcase, vol->upcase_len))
+			continue;
+		if (MREF_LE(al_entry->mft_reference) == ni->mft_no) {
+			if (MSEQNO_LE(al_entry->mft_reference) != ni->seq_no) {
+				ntfs_error(vol->sb, "Found stale mft "
+						"reference in attribute list "
+						"of base inode 0x%lx.%s",
+						base_ni->mft_no, es);
+				err = -EIO;
+				break;
+			}
+		} else { /* Mft references do not match. */
+			/* If there is a mapped record unmap it first. */
+			if (ni != base_ni)
+				unmap_extent_mft_record(ni);
+			/* Do we want the base record back? */
+			if (MREF_LE(al_entry->mft_reference) ==
+					base_ni->mft_no) {
+				ni = ctx->ntfs_ino = base_ni;
+				ctx->mrec = ctx->base_mrec;
+			} else {
+				/* We want an extent record. */
+				ctx->mrec = map_extent_mft_record(base_ni,
+						le64_to_cpu(
+						al_entry->mft_reference), &ni);
+				if (IS_ERR(ctx->mrec)) {
+					ntfs_error(vol->sb, "Failed to map "
+							"extent mft record "
+							"0x%lx of base inode "
+							"0x%lx.%s",
+							MREF_LE(al_entry->
+							mft_reference),
+							base_ni->mft_no, es);
+					err = PTR_ERR(ctx->mrec);
+					if (err == -ENOENT)
+						err = -EIO;
+					/* Cause @ctx to be sanitized below. */
+					ni = NULL;
+					break;
+				}
+				ctx->ntfs_ino = ni;
+			}
+			ctx->attr = (ATTR_RECORD*)((u8*)ctx->mrec +
+					le16_to_cpu(ctx->mrec->attrs_offset));
+		}
+		/*
+		 * ctx->vfs_ino, ctx->mrec, and ctx->attr now point to the
+		 * mft record containing the attribute represented by the
+		 * current al_entry.
+		 */
+		/*
+		 * We could call into ntfs_attr_find() to find the right
+		 * attribute in this mft record but this would be less
+		 * efficient and not quite accurate as ntfs_attr_find() ignores
+		 * the attribute instance numbers for example which become
+		 * important when one plays with attribute lists.  Also,
+		 * because a proper match has been found in the attribute list
+		 * entry above, the comparison can now be optimized.  So it is
+		 * worth re-implementing a simplified ntfs_attr_find() here.
+		 */
+		a = ctx->attr;
+		/*
+		 * Use a manual loop so we can still use break and continue
+		 * with the same meanings as above.
+		 */
+do_next_attr_loop:
+		if ((u8*)a < (u8*)ctx->mrec || (u8*)a > (u8*)ctx->mrec +
+				le32_to_cpu(ctx->mrec->bytes_allocated))
+			break;
+		if (a->type == AT_END)
+			break;
+		if (!a->length)
+			break;
+		if (al_entry->instance != a->instance)
+			goto do_next_attr;
+		/*
+		 * If the type and/or the name are mismatched between the
+		 * attribute list entry and the attribute record, there is
+		 * corruption so we break and return error EIO.
+		 */
+		if (al_entry->type != a->type)
+			break;
+		if (!ntfs_are_names_equal((ntfschar*)((u8*)a +
+				le16_to_cpu(a->name_offset)), a->name_length,
+				al_name, al_name_len, CASE_SENSITIVE,
+				vol->upcase, vol->upcase_len))
+			break;
+		ctx->attr = a;
+		/*
+		 * If no @val specified or @val specified and it matches, we
+		 * have found it!
+		 */
+		if (!val || (!a->non_resident && le32_to_cpu(
+				a->data.resident.value_length) == val_len &&
+				!memcmp((u8*)a +
+				le16_to_cpu(a->data.resident.value_offset),
+				val, val_len))) {
+			ntfs_debug("Done, found.");
+			return 0;
+		}
+do_next_attr:
+		/* Proceed to the next attribute in the current mft record. */
+		a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length));
+		goto do_next_attr_loop;
+	}
+	if (!err) {
+		ntfs_error(vol->sb, "Base inode 0x%lx contains corrupt "
+				"attribute list attribute.%s", base_ni->mft_no,
+				es);
+		err = -EIO;
+	}
+	if (ni != base_ni) {
+		if (ni)
+			unmap_extent_mft_record(ni);
+		ctx->ntfs_ino = base_ni;
+		ctx->mrec = ctx->base_mrec;
+		ctx->attr = ctx->base_attr;
+	}
+	if (err != -ENOMEM)
+		NVolSetErrors(vol);
+	return err;
+not_found:
+	/*
+	 * If we were looking for AT_END, we reset the search context @ctx and
+	 * use ntfs_attr_find() to seek to the end of the base mft record.
+	 */
+	if (type == AT_END) {
+		ntfs_attr_reinit_search_ctx(ctx);
+		return ntfs_attr_find(AT_END, name, name_len, ic, val, val_len,
+				ctx);
+	}
+	/*
+	 * The attribute was not found.  Before we return, we want to ensure
+	 * @ctx->mrec and @ctx->attr indicate the position at which the
+	 * attribute should be inserted in the base mft record.  Since we also
+	 * want to preserve @ctx->al_entry we cannot reinitialize the search
+	 * context using ntfs_attr_reinit_search_ctx() as this would set
+	 * @ctx->al_entry to NULL.  Thus we do the necessary bits manually (see
+	 * ntfs_attr_init_search_ctx() below).  Note, we _only_ preserve
+	 * @ctx->al_entry as the remaining fields (base_*) are identical to
+	 * their non base_ counterparts and we cannot set @ctx->base_attr
+	 * correctly yet as we do not know what @ctx->attr will be set to by
+	 * the call to ntfs_attr_find() below.
+	 */
+	if (ni != base_ni)
+		unmap_extent_mft_record(ni);
+	ctx->mrec = ctx->base_mrec;
+	ctx->attr = (ATTR_RECORD*)((u8*)ctx->mrec +
+			le16_to_cpu(ctx->mrec->attrs_offset));
+	ctx->is_first = true;
+	ctx->ntfs_ino = base_ni;
+	ctx->base_ntfs_ino = NULL;
+	ctx->base_mrec = NULL;
+	ctx->base_attr = NULL;
+	/*
+	 * In case there are multiple matches in the base mft record, need to
+	 * keep enumerating until we get an attribute not found response (or
+	 * another error), otherwise we would keep returning the same attribute
+	 * over and over again and all programs using us for enumeration would
+	 * lock up in a tight loop.
+	 */
+	do {
+		err = ntfs_attr_find(type, name, name_len, ic, val, val_len,
+				ctx);
+	} while (!err);
+	ntfs_debug("Done, not found.");
+	return err;
+}
+
+/**
+ * ntfs_attr_lookup - find an attribute in an ntfs inode
+ * @type:	attribute type to find
+ * @name:	attribute name to find (optional, i.e. NULL means don't care)
+ * @name_len:	attribute name length (only needed if @name present)
+ * @ic:		IGNORE_CASE or CASE_SENSITIVE (ignored if @name not present)
+ * @lowest_vcn:	lowest vcn to find (optional, non-resident attributes only)
+ * @val:	attribute value to find (optional, resident attributes only)
+ * @val_len:	attribute value length
+ * @ctx:	search context with mft record and attribute to search from
+ *
+ * Find an attribute in an ntfs inode.  On first search @ctx->ntfs_ino must
+ * be the base mft record and @ctx must have been obtained from a call to
+ * ntfs_attr_get_search_ctx().
+ *
+ * This function transparently handles attribute lists and @ctx is used to
+ * continue searches where they were left off at.
+ *
+ * After finishing with the attribute/mft record you need to call
+ * ntfs_attr_put_search_ctx() to cleanup the search context (unmapping any
+ * mapped inodes, etc).
+ *
+ * Return 0 if the search was successful and -errno if not.
+ *
+ * When 0, @ctx->attr is the found attribute and it is in mft record
+ * @ctx->mrec.  If an attribute list attribute is present, @ctx->al_entry is
+ * the attribute list entry of the found attribute.
+ *
+ * When -ENOENT, @ctx->attr is the attribute which collates just after the
+ * attribute being searched for, i.e. if one wants to add the attribute to the
+ * mft record this is the correct place to insert it into.  If an attribute
+ * list attribute is present, @ctx->al_entry is the attribute list entry which
+ * collates just after the attribute list entry of the attribute being searched
+ * for, i.e. if one wants to add the attribute to the mft record this is the
+ * correct place to insert its attribute list entry into.
+ *
+ * When -errno != -ENOENT, an error occurred during the lookup.  @ctx->attr is
+ * then undefined and in particular you should not rely on it not changing.
+ */
+int ntfs_attr_lookup(const ATTR_TYPE type, const ntfschar *name,
+		const u32 name_len, const IGNORE_CASE_BOOL ic,
+		const VCN lowest_vcn, const u8 *val, const u32 val_len,
+		ntfs_attr_search_ctx *ctx)
+{
+	ntfs_inode *base_ni;
+
+	ntfs_debug("Entering.");
+	BUG_ON(IS_ERR(ctx->mrec));
+	if (ctx->base_ntfs_ino)
+		base_ni = ctx->base_ntfs_ino;
+	else
+		base_ni = ctx->ntfs_ino;
+	/* Sanity check, just for debugging really. */
+	BUG_ON(!base_ni);
+	if (!NInoAttrList(base_ni) || type == AT_ATTRIBUTE_LIST)
+		return ntfs_attr_find(type, name, name_len, ic, val, val_len,
+				ctx);
+	return ntfs_external_attr_find(type, name, name_len, ic, lowest_vcn,
+			val, val_len, ctx);
+}
+
+/**
+ * ntfs_attr_init_search_ctx - initialize an attribute search context
+ * @ctx:	attribute search context to initialize
+ * @ni:		ntfs inode with which to initialize the search context
+ * @mrec:	mft record with which to initialize the search context
+ *
+ * Initialize the attribute search context @ctx with @ni and @mrec.
+ */
+static inline void ntfs_attr_init_search_ctx(ntfs_attr_search_ctx *ctx,
+		ntfs_inode *ni, MFT_RECORD *mrec)
+{
+	*ctx = (ntfs_attr_search_ctx) {
+		.mrec = mrec,
+		/* Sanity checks are performed elsewhere. */
+		.attr = (ATTR_RECORD*)((u8*)mrec +
+				le16_to_cpu(mrec->attrs_offset)),
+		.is_first = true,
+		.ntfs_ino = ni,
+	};
+}
+
+/**
+ * ntfs_attr_reinit_search_ctx - reinitialize an attribute search context
+ * @ctx:	attribute search context to reinitialize
+ *
+ * Reinitialize the attribute search context @ctx, unmapping an associated
+ * extent mft record if present, and initialize the search context again.
+ *
+ * This is used when a search for a new attribute is being started to reset
+ * the search context to the beginning.
+ */
+void ntfs_attr_reinit_search_ctx(ntfs_attr_search_ctx *ctx)
+{
+	if (likely(!ctx->base_ntfs_ino)) {
+		/* No attribute list. */
+		ctx->is_first = true;
+		/* Sanity checks are performed elsewhere. */
+		ctx->attr = (ATTR_RECORD*)((u8*)ctx->mrec +
+				le16_to_cpu(ctx->mrec->attrs_offset));
+		/*
+		 * This needs resetting due to ntfs_external_attr_find() which
+		 * can leave it set despite having zeroed ctx->base_ntfs_ino.
+		 */
+		ctx->al_entry = NULL;
+		return;
+	} /* Attribute list. */
+	if (ctx->ntfs_ino != ctx->base_ntfs_ino)
+		unmap_extent_mft_record(ctx->ntfs_ino);
+	ntfs_attr_init_search_ctx(ctx, ctx->base_ntfs_ino, ctx->base_mrec);
+	return;
+}
+
+/**
+ * ntfs_attr_get_search_ctx - allocate/initialize a new attribute search context
+ * @ni:		ntfs inode with which to initialize the search context
+ * @mrec:	mft record with which to initialize the search context
+ *
+ * Allocate a new attribute search context, initialize it with @ni and @mrec,
+ * and return it. Return NULL if allocation failed.
+ */
+ntfs_attr_search_ctx *ntfs_attr_get_search_ctx(ntfs_inode *ni, MFT_RECORD *mrec)
+{
+	ntfs_attr_search_ctx *ctx;
+
+	ctx = kmem_cache_alloc(ntfs_attr_ctx_cache, GFP_NOFS);
+	if (ctx)
+		ntfs_attr_init_search_ctx(ctx, ni, mrec);
+	return ctx;
+}
+
+/**
+ * ntfs_attr_put_search_ctx - release an attribute search context
+ * @ctx:	attribute search context to free
+ *
+ * Release the attribute search context @ctx, unmapping an associated extent
+ * mft record if present.
+ */
+void ntfs_attr_put_search_ctx(ntfs_attr_search_ctx *ctx)
+{
+	if (ctx->base_ntfs_ino && ctx->ntfs_ino != ctx->base_ntfs_ino)
+		unmap_extent_mft_record(ctx->ntfs_ino);
+	kmem_cache_free(ntfs_attr_ctx_cache, ctx);
+	return;
+}
+
+#ifdef NTFS_RW
+
+/**
+ * ntfs_attr_find_in_attrdef - find an attribute in the $AttrDef system file
+ * @vol:	ntfs volume to which the attribute belongs
+ * @type:	attribute type which to find
+ *
+ * Search for the attribute definition record corresponding to the attribute
+ * @type in the $AttrDef system file.
+ *
+ * Return the attribute type definition record if found and NULL if not found.
+ */
+static ATTR_DEF *ntfs_attr_find_in_attrdef(const ntfs_volume *vol,
+		const ATTR_TYPE type)
+{
+	ATTR_DEF *ad;
+
+	BUG_ON(!vol->attrdef);
+	BUG_ON(!type);
+	for (ad = vol->attrdef; (u8*)ad - (u8*)vol->attrdef <
+			vol->attrdef_size && ad->type; ++ad) {
+		/* We have not found it yet, carry on searching. */
+		if (likely(le32_to_cpu(ad->type) < le32_to_cpu(type)))
+			continue;
+		/* We found the attribute; return it. */
+		if (likely(ad->type == type))
+			return ad;
+		/* We have gone too far already.  No point in continuing. */
+		break;
+	}
+	/* Attribute not found. */
+	ntfs_debug("Attribute type 0x%x not found in $AttrDef.",
+			le32_to_cpu(type));
+	return NULL;
+}
+
+/**
+ * ntfs_attr_size_bounds_check - check a size of an attribute type for validity
+ * @vol:	ntfs volume to which the attribute belongs
+ * @type:	attribute type which to check
+ * @size:	size which to check
+ *
+ * Check whether the @size in bytes is valid for an attribute of @type on the
+ * ntfs volume @vol.  This information is obtained from $AttrDef system file.
+ *
+ * Return 0 if valid, -ERANGE if not valid, or -ENOENT if the attribute is not
+ * listed in $AttrDef.
+ */
+int ntfs_attr_size_bounds_check(const ntfs_volume *vol, const ATTR_TYPE type,
+		const s64 size)
+{
+	ATTR_DEF *ad;
+
+	BUG_ON(size < 0);
+	/*
+	 * $ATTRIBUTE_LIST has a maximum size of 256kiB, but this is not
+	 * listed in $AttrDef.
+	 */
+	if (unlikely(type == AT_ATTRIBUTE_LIST && size > 256 * 1024))
+		return -ERANGE;
+	/* Get the $AttrDef entry for the attribute @type. */
+	ad = ntfs_attr_find_in_attrdef(vol, type);
+	if (unlikely(!ad))
+		return -ENOENT;
+	/* Do the bounds check. */
+	if (((sle64_to_cpu(ad->min_size) > 0) &&
+			size < sle64_to_cpu(ad->min_size)) ||
+			((sle64_to_cpu(ad->max_size) > 0) && size >
+			sle64_to_cpu(ad->max_size)))
+		return -ERANGE;
+	return 0;
+}
+
+/**
+ * ntfs_attr_can_be_non_resident - check if an attribute can be non-resident
+ * @vol:	ntfs volume to which the attribute belongs
+ * @type:	attribute type which to check
+ *
+ * Check whether the attribute of @type on the ntfs volume @vol is allowed to
+ * be non-resident.  This information is obtained from $AttrDef system file.
+ *
+ * Return 0 if the attribute is allowed to be non-resident, -EPERM if not, and
+ * -ENOENT if the attribute is not listed in $AttrDef.
+ */
+int ntfs_attr_can_be_non_resident(const ntfs_volume *vol, const ATTR_TYPE type)
+{
+	ATTR_DEF *ad;
+
+	/* Find the attribute definition record in $AttrDef. */
+	ad = ntfs_attr_find_in_attrdef(vol, type);
+	if (unlikely(!ad))
+		return -ENOENT;
+	/* Check the flags and return the result. */
+	if (ad->flags & ATTR_DEF_RESIDENT)
+		return -EPERM;
+	return 0;
+}
+
+/**
+ * ntfs_attr_can_be_resident - check if an attribute can be resident
+ * @vol:	ntfs volume to which the attribute belongs
+ * @type:	attribute type which to check
+ *
+ * Check whether the attribute of @type on the ntfs volume @vol is allowed to
+ * be resident.  This information is derived from our ntfs knowledge and may
+ * not be completely accurate, especially when user defined attributes are
+ * present.  Basically we allow everything to be resident except for index
+ * allocation and $EA attributes.
+ *
+ * Return 0 if the attribute is allowed to be non-resident and -EPERM if not.
+ *
+ * Warning: In the system file $MFT the attribute $Bitmap must be non-resident
+ *	    otherwise windows will not boot (blue screen of death)!  We cannot
+ *	    check for this here as we do not know which inode's $Bitmap is
+ *	    being asked about so the caller needs to special case this.
+ */
+int ntfs_attr_can_be_resident(const ntfs_volume *vol, const ATTR_TYPE type)
+{
+	if (type == AT_INDEX_ALLOCATION)
+		return -EPERM;
+	return 0;
+}
+
+/**
+ * ntfs_attr_record_resize - resize an attribute record
+ * @m:		mft record containing attribute record
+ * @a:		attribute record to resize
+ * @new_size:	new size in bytes to which to resize the attribute record @a
+ *
+ * Resize the attribute record @a, i.e. the resident part of the attribute, in
+ * the mft record @m to @new_size bytes.
+ *
+ * Return 0 on success and -errno on error.  The following error codes are
+ * defined:
+ *	-ENOSPC	- Not enough space in the mft record @m to perform the resize.
+ *
+ * Note: On error, no modifications have been performed whatsoever.
+ *
+ * Warning: If you make a record smaller without having copied all the data you
+ *	    are interested in the data may be overwritten.
+ */
+int ntfs_attr_record_resize(MFT_RECORD *m, ATTR_RECORD *a, u32 new_size)
+{
+	ntfs_debug("Entering for new_size %u.", new_size);
+	/* Align to 8 bytes if it is not already done. */
+	if (new_size & 7)
+		new_size = (new_size + 7) & ~7;
+	/* If the actual attribute length has changed, move things around. */
+	if (new_size != le32_to_cpu(a->length)) {
+		u32 new_muse = le32_to_cpu(m->bytes_in_use) -
+				le32_to_cpu(a->length) + new_size;
+		/* Not enough space in this mft record. */
+		if (new_muse > le32_to_cpu(m->bytes_allocated))
+			return -ENOSPC;
+		/* Move attributes following @a to their new location. */
+		memmove((u8*)a + new_size, (u8*)a + le32_to_cpu(a->length),
+				le32_to_cpu(m->bytes_in_use) - ((u8*)a -
+				(u8*)m) - le32_to_cpu(a->length));
+		/* Adjust @m to reflect the change in used space. */
+		m->bytes_in_use = cpu_to_le32(new_muse);
+		/* Adjust @a to reflect the new size. */
+		if (new_size >= offsetof(ATTR_REC, length) + sizeof(a->length))
+			a->length = cpu_to_le32(new_size);
+	}
+	return 0;
+}
+
+/**
+ * ntfs_resident_attr_value_resize - resize the value of a resident attribute
+ * @m:		mft record containing attribute record
+ * @a:		attribute record whose value to resize
+ * @new_size:	new size in bytes to which to resize the attribute value of @a
+ *
+ * Resize the value of the attribute @a in the mft record @m to @new_size bytes.
+ * If the value is made bigger, the newly allocated space is cleared.
+ *
+ * Return 0 on success and -errno on error.  The following error codes are
+ * defined:
+ *	-ENOSPC	- Not enough space in the mft record @m to perform the resize.
+ *
+ * Note: On error, no modifications have been performed whatsoever.
+ *
+ * Warning: If you make a record smaller without having copied all the data you
+ *	    are interested in the data may be overwritten.
+ */
+int ntfs_resident_attr_value_resize(MFT_RECORD *m, ATTR_RECORD *a,
+		const u32 new_size)
+{
+	u32 old_size;
+
+	/* Resize the resident part of the attribute record. */
+	if (ntfs_attr_record_resize(m, a,
+			le16_to_cpu(a->data.resident.value_offset) + new_size))
+		return -ENOSPC;
+	/*
+	 * The resize succeeded!  If we made the attribute value bigger, clear
+	 * the area between the old size and @new_size.
+	 */
+	old_size = le32_to_cpu(a->data.resident.value_length);
+	if (new_size > old_size)
+		memset((u8*)a + le16_to_cpu(a->data.resident.value_offset) +
+				old_size, 0, new_size - old_size);
+	/* Finally update the length of the attribute value. */
+	a->data.resident.value_length = cpu_to_le32(new_size);
+	return 0;
+}
+
+/**
+ * ntfs_attr_make_non_resident - convert a resident to a non-resident attribute
+ * @ni:		ntfs inode describing the attribute to convert
+ * @data_size:	size of the resident data to copy to the non-resident attribute
+ *
+ * Convert the resident ntfs attribute described by the ntfs inode @ni to a
+ * non-resident one.
+ *
+ * @data_size must be equal to the attribute value size.  This is needed since
+ * we need to know the size before we can map the mft record and our callers
+ * always know it.  The reason we cannot simply read the size from the vfs
+ * inode i_size is that this is not necessarily uptodate.  This happens when
+ * ntfs_attr_make_non_resident() is called in the ->truncate call path(s).
+ *
+ * Return 0 on success and -errno on error.  The following error return codes
+ * are defined:
+ *	-EPERM	- The attribute is not allowed to be non-resident.
+ *	-ENOMEM	- Not enough memory.
+ *	-ENOSPC	- Not enough disk space.
+ *	-EINVAL	- Attribute not defined on the volume.
+ *	-EIO	- I/o error or other error.
+ * Note that -ENOSPC is also returned in the case that there is not enough
+ * space in the mft record to do the conversion.  This can happen when the mft
+ * record is already very full.  The caller is responsible for trying to make
+ * space in the mft record and trying again.  FIXME: Do we need a separate
+ * error return code for this kind of -ENOSPC or is it always worth trying
+ * again in case the attribute may then fit in a resident state so no need to
+ * make it non-resident at all?  Ho-hum...  (AIA)
+ *
+ * NOTE to self: No changes in the attribute list are required to move from
+ *		 a resident to a non-resident attribute.
+ *
+ * Locking: - The caller must hold i_mutex on the inode.
+ */
+int ntfs_attr_make_non_resident(ntfs_inode *ni, const u32 data_size)
+{
+	s64 new_size;
+	struct inode *vi = VFS_I(ni);
+	ntfs_volume *vol = ni->vol;
+	ntfs_inode *base_ni;
+	MFT_RECORD *m;
+	ATTR_RECORD *a;
+	ntfs_attr_search_ctx *ctx;
+	struct page *page;
+	runlist_element *rl;
+	u8 *kaddr;
+	unsigned long flags;
+	int mp_size, mp_ofs, name_ofs, arec_size, err, err2;
+	u32 attr_size;
+	u8 old_res_attr_flags;
+
+	/* Check that the attribute is allowed to be non-resident. */
+	err = ntfs_attr_can_be_non_resident(vol, ni->type);
+	if (unlikely(err)) {
+		if (err == -EPERM)
+			ntfs_debug("Attribute is not allowed to be "
+					"non-resident.");
+		else
+			ntfs_debug("Attribute not defined on the NTFS "
+					"volume!");
+		return err;
+	}
+	/*
+	 * FIXME: Compressed and encrypted attributes are not supported when
+	 * writing and we should never have gotten here for them.
+	 */
+	BUG_ON(NInoCompressed(ni));
+	BUG_ON(NInoEncrypted(ni));
+	/*
+	 * The size needs to be aligned to a cluster boundary for allocation
+	 * purposes.
+	 */
+	new_size = (data_size + vol->cluster_size - 1) &
+			~(vol->cluster_size - 1);
+	if (new_size > 0) {
+		/*
+		 * Will need the page later and since the page lock nests
+		 * outside all ntfs locks, we need to get the page now.
+		 */
+		page = find_or_create_page(vi->i_mapping, 0,
+				mapping_gfp_mask(vi->i_mapping));
+		if (unlikely(!page))
+			return -ENOMEM;
+		/* Start by allocating clusters to hold the attribute value. */
+		rl = ntfs_cluster_alloc(vol, 0, new_size >>
+				vol->cluster_size_bits, -1, DATA_ZONE, true);
+		if (IS_ERR(rl)) {
+			err = PTR_ERR(rl);
+			ntfs_debug("Failed to allocate cluster%s, error code "
+					"%i.", (new_size >>
+					vol->cluster_size_bits) > 1 ? "s" : "",
+					err);
+			goto page_err_out;
+		}
+	} else {
+		rl = NULL;
+		page = NULL;
+	}
+	/* Determine the size of the mapping pairs array. */
+	mp_size = ntfs_get_size_for_mapping_pairs(vol, rl, 0, -1);
+	if (unlikely(mp_size < 0)) {
+		err = mp_size;
+		ntfs_debug("Failed to get size for mapping pairs array, error "
+				"code %i.", err);
+		goto rl_err_out;
+	}
+	down_write(&ni->runlist.lock);
+	if (!NInoAttr(ni))
+		base_ni = ni;
+	else
+		base_ni = ni->ext.base_ntfs_ino;
+	m = map_mft_record(base_ni);
+	if (IS_ERR(m)) {
+		err = PTR_ERR(m);
+		m = NULL;
+		ctx = NULL;
+		goto err_out;
+	}
+	ctx = ntfs_attr_get_search_ctx(base_ni, m);
+	if (unlikely(!ctx)) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+			CASE_SENSITIVE, 0, NULL, 0, ctx);
+	if (unlikely(err)) {
+		if (err == -ENOENT)
+			err = -EIO;
+		goto err_out;
+	}
+	m = ctx->mrec;
+	a = ctx->attr;
+	BUG_ON(NInoNonResident(ni));
+	BUG_ON(a->non_resident);
+	/*
+	 * Calculate new offsets for the name and the mapping pairs array.
+	 */
+	if (NInoSparse(ni) || NInoCompressed(ni))
+		name_ofs = (offsetof(ATTR_REC,
+				data.non_resident.compressed_size) +
+				sizeof(a->data.non_resident.compressed_size) +
+				7) & ~7;
+	else
+		name_ofs = (offsetof(ATTR_REC,
+				data.non_resident.compressed_size) + 7) & ~7;
+	mp_ofs = (name_ofs + a->name_length * sizeof(ntfschar) + 7) & ~7;
+	/*
+	 * Determine the size of the resident part of the now non-resident
+	 * attribute record.
+	 */
+	arec_size = (mp_ofs + mp_size + 7) & ~7;
+	/*
+	 * If the page is not uptodate bring it uptodate by copying from the
+	 * attribute value.
+	 */
+	attr_size = le32_to_cpu(a->data.resident.value_length);
+	BUG_ON(attr_size != data_size);
+	if (page && !PageUptodate(page)) {
+		kaddr = kmap_atomic(page);
+		memcpy(kaddr, (u8*)a +
+				le16_to_cpu(a->data.resident.value_offset),
+				attr_size);
+		memset(kaddr + attr_size, 0, PAGE_SIZE - attr_size);
+		kunmap_atomic(kaddr);
+		flush_dcache_page(page);
+		SetPageUptodate(page);
+	}
+	/* Backup the attribute flag. */
+	old_res_attr_flags = a->data.resident.flags;
+	/* Resize the resident part of the attribute record. */
+	err = ntfs_attr_record_resize(m, a, arec_size);
+	if (unlikely(err))
+		goto err_out;
+	/*
+	 * Convert the resident part of the attribute record to describe a
+	 * non-resident attribute.
+	 */
+	a->non_resident = 1;
+	/* Move the attribute name if it exists and update the offset. */
+	if (a->name_length)
+		memmove((u8*)a + name_ofs, (u8*)a + le16_to_cpu(a->name_offset),
+				a->name_length * sizeof(ntfschar));
+	a->name_offset = cpu_to_le16(name_ofs);
+	/* Setup the fields specific to non-resident attributes. */
+	a->data.non_resident.lowest_vcn = 0;
+	a->data.non_resident.highest_vcn = cpu_to_sle64((new_size - 1) >>
+			vol->cluster_size_bits);
+	a->data.non_resident.mapping_pairs_offset = cpu_to_le16(mp_ofs);
+	memset(&a->data.non_resident.reserved, 0,
+			sizeof(a->data.non_resident.reserved));
+	a->data.non_resident.allocated_size = cpu_to_sle64(new_size);
+	a->data.non_resident.data_size =
+			a->data.non_resident.initialized_size =
+			cpu_to_sle64(attr_size);
+	if (NInoSparse(ni) || NInoCompressed(ni)) {
+		a->data.non_resident.compression_unit = 0;
+		if (NInoCompressed(ni) || vol->major_ver < 3)
+			a->data.non_resident.compression_unit = 4;
+		a->data.non_resident.compressed_size =
+				a->data.non_resident.allocated_size;
+	} else
+		a->data.non_resident.compression_unit = 0;
+	/* Generate the mapping pairs array into the attribute record. */
+	err = ntfs_mapping_pairs_build(vol, (u8*)a + mp_ofs,
+			arec_size - mp_ofs, rl, 0, -1, NULL);
+	if (unlikely(err)) {
+		ntfs_debug("Failed to build mapping pairs, error code %i.",
+				err);
+		goto undo_err_out;
+	}
+	/* Setup the in-memory attribute structure to be non-resident. */
+	ni->runlist.rl = rl;
+	write_lock_irqsave(&ni->size_lock, flags);
+	ni->allocated_size = new_size;
+	if (NInoSparse(ni) || NInoCompressed(ni)) {
+		ni->itype.compressed.size = ni->allocated_size;
+		if (a->data.non_resident.compression_unit) {
+			ni->itype.compressed.block_size = 1U << (a->data.
+					non_resident.compression_unit +
+					vol->cluster_size_bits);
+			ni->itype.compressed.block_size_bits =
+					ffs(ni->itype.compressed.block_size) -
+					1;
+			ni->itype.compressed.block_clusters = 1U <<
+					a->data.non_resident.compression_unit;
+		} else {
+			ni->itype.compressed.block_size = 0;
+			ni->itype.compressed.block_size_bits = 0;
+			ni->itype.compressed.block_clusters = 0;
+		}
+		vi->i_blocks = ni->itype.compressed.size >> 9;
+	} else
+		vi->i_blocks = ni->allocated_size >> 9;
+	write_unlock_irqrestore(&ni->size_lock, flags);
+	/*
+	 * This needs to be last since the address space operations ->readpage
+	 * and ->writepage can run concurrently with us as they are not
+	 * serialized on i_mutex.  Note, we are not allowed to fail once we flip
+	 * this switch, which is another reason to do this last.
+	 */
+	NInoSetNonResident(ni);
+	/* Mark the mft record dirty, so it gets written back. */
+	flush_dcache_mft_record_page(ctx->ntfs_ino);
+	mark_mft_record_dirty(ctx->ntfs_ino);
+	ntfs_attr_put_search_ctx(ctx);
+	unmap_mft_record(base_ni);
+	up_write(&ni->runlist.lock);
+	if (page) {
+		set_page_dirty(page);
+		unlock_page(page);
+		put_page(page);
+	}
+	ntfs_debug("Done.");
+	return 0;
+undo_err_out:
+	/* Convert the attribute back into a resident attribute. */
+	a->non_resident = 0;
+	/* Move the attribute name if it exists and update the offset. */
+	name_ofs = (offsetof(ATTR_RECORD, data.resident.reserved) +
+			sizeof(a->data.resident.reserved) + 7) & ~7;
+	if (a->name_length)
+		memmove((u8*)a + name_ofs, (u8*)a + le16_to_cpu(a->name_offset),
+				a->name_length * sizeof(ntfschar));
+	mp_ofs = (name_ofs + a->name_length * sizeof(ntfschar) + 7) & ~7;
+	a->name_offset = cpu_to_le16(name_ofs);
+	arec_size = (mp_ofs + attr_size + 7) & ~7;
+	/* Resize the resident part of the attribute record. */
+	err2 = ntfs_attr_record_resize(m, a, arec_size);
+	if (unlikely(err2)) {
+		/*
+		 * This cannot happen (well if memory corruption is at work it
+		 * could happen in theory), but deal with it as well as we can.
+		 * If the old size is too small, truncate the attribute,
+		 * otherwise simply give it a larger allocated size.
+		 * FIXME: Should check whether chkdsk complains when the
+		 * allocated size is much bigger than the resident value size.
+		 */
+		arec_size = le32_to_cpu(a->length);
+		if ((mp_ofs + attr_size) > arec_size) {
+			err2 = attr_size;
+			attr_size = arec_size - mp_ofs;
+			ntfs_error(vol->sb, "Failed to undo partial resident "
+					"to non-resident attribute "
+					"conversion.  Truncating inode 0x%lx, "
+					"attribute type 0x%x from %i bytes to "
+					"%i bytes to maintain metadata "
+					"consistency.  THIS MEANS YOU ARE "
+					"LOSING %i BYTES DATA FROM THIS %s.",
+					vi->i_ino,
+					(unsigned)le32_to_cpu(ni->type),
+					err2, attr_size, err2 - attr_size,
+					((ni->type == AT_DATA) &&
+					!ni->name_len) ? "FILE": "ATTRIBUTE");
+			write_lock_irqsave(&ni->size_lock, flags);
+			ni->initialized_size = attr_size;
+			i_size_write(vi, attr_size);
+			write_unlock_irqrestore(&ni->size_lock, flags);
+		}
+	}
+	/* Setup the fields specific to resident attributes. */
+	a->data.resident.value_length = cpu_to_le32(attr_size);
+	a->data.resident.value_offset = cpu_to_le16(mp_ofs);
+	a->data.resident.flags = old_res_attr_flags;
+	memset(&a->data.resident.reserved, 0,
+			sizeof(a->data.resident.reserved));
+	/* Copy the data from the page back to the attribute value. */
+	if (page) {
+		kaddr = kmap_atomic(page);
+		memcpy((u8*)a + mp_ofs, kaddr, attr_size);
+		kunmap_atomic(kaddr);
+	}
+	/* Setup the allocated size in the ntfs inode in case it changed. */
+	write_lock_irqsave(&ni->size_lock, flags);
+	ni->allocated_size = arec_size - mp_ofs;
+	write_unlock_irqrestore(&ni->size_lock, flags);
+	/* Mark the mft record dirty, so it gets written back. */
+	flush_dcache_mft_record_page(ctx->ntfs_ino);
+	mark_mft_record_dirty(ctx->ntfs_ino);
+err_out:
+	if (ctx)
+		ntfs_attr_put_search_ctx(ctx);
+	if (m)
+		unmap_mft_record(base_ni);
+	ni->runlist.rl = NULL;
+	up_write(&ni->runlist.lock);
+rl_err_out:
+	if (rl) {
+		if (ntfs_cluster_free_from_rl(vol, rl) < 0) {
+			ntfs_error(vol->sb, "Failed to release allocated "
+					"cluster(s) in error code path.  Run "
+					"chkdsk to recover the lost "
+					"cluster(s).");
+			NVolSetErrors(vol);
+		}
+		ntfs_free(rl);
+page_err_out:
+		unlock_page(page);
+		put_page(page);
+	}
+	if (err == -EINVAL)
+		err = -EIO;
+	return err;
+}
+
+/**
+ * ntfs_attr_extend_allocation - extend the allocated space of an attribute
+ * @ni:			ntfs inode of the attribute whose allocation to extend
+ * @new_alloc_size:	new size in bytes to which to extend the allocation to
+ * @new_data_size:	new size in bytes to which to extend the data to
+ * @data_start:		beginning of region which is required to be non-sparse
+ *
+ * Extend the allocated space of an attribute described by the ntfs inode @ni
+ * to @new_alloc_size bytes.  If @data_start is -1, the whole extension may be
+ * implemented as a hole in the file (as long as both the volume and the ntfs
+ * inode @ni have sparse support enabled).  If @data_start is >= 0, then the
+ * region between the old allocated size and @data_start - 1 may be made sparse
+ * but the regions between @data_start and @new_alloc_size must be backed by
+ * actual clusters.
+ *
+ * If @new_data_size is -1, it is ignored.  If it is >= 0, then the data size
+ * of the attribute is extended to @new_data_size.  Note that the i_size of the
+ * vfs inode is not updated.  Only the data size in the base attribute record
+ * is updated.  The caller has to update i_size separately if this is required.
+ * WARNING: It is a BUG() for @new_data_size to be smaller than the old data
+ * size as well as for @new_data_size to be greater than @new_alloc_size.
+ *
+ * For resident attributes this involves resizing the attribute record and if
+ * necessary moving it and/or other attributes into extent mft records and/or
+ * converting the attribute to a non-resident attribute which in turn involves
+ * extending the allocation of a non-resident attribute as described below.
+ *
+ * For non-resident attributes this involves allocating clusters in the data
+ * zone on the volume (except for regions that are being made sparse) and
+ * extending the run list to describe the allocated clusters as well as
+ * updating the mapping pairs array of the attribute.  This in turn involves
+ * resizing the attribute record and if necessary moving it and/or other
+ * attributes into extent mft records and/or splitting the attribute record
+ * into multiple extent attribute records.
+ *
+ * Also, the attribute list attribute is updated if present and in some of the
+ * above cases (the ones where extent mft records/attributes come into play),
+ * an attribute list attribute is created if not already present.
+ *
+ * Return the new allocated size on success and -errno on error.  In the case
+ * that an error is encountered but a partial extension at least up to
+ * @data_start (if present) is possible, the allocation is partially extended
+ * and this is returned.  This means the caller must check the returned size to
+ * determine if the extension was partial.  If @data_start is -1 then partial
+ * allocations are not performed.
+ *
+ * WARNING: Do not call ntfs_attr_extend_allocation() for $MFT/$DATA.
+ *
+ * Locking: This function takes the runlist lock of @ni for writing as well as
+ * locking the mft record of the base ntfs inode.  These locks are maintained
+ * throughout execution of the function.  These locks are required so that the
+ * attribute can be resized safely and so that it can for example be converted
+ * from resident to non-resident safely.
+ *
+ * TODO: At present attribute list attribute handling is not implemented.
+ *
+ * TODO: At present it is not safe to call this function for anything other
+ * than the $DATA attribute(s) of an uncompressed and unencrypted file.
+ */
+s64 ntfs_attr_extend_allocation(ntfs_inode *ni, s64 new_alloc_size,
+		const s64 new_data_size, const s64 data_start)
+{
+	VCN vcn;
+	s64 ll, allocated_size, start = data_start;
+	struct inode *vi = VFS_I(ni);
+	ntfs_volume *vol = ni->vol;
+	ntfs_inode *base_ni;
+	MFT_RECORD *m;
+	ATTR_RECORD *a;
+	ntfs_attr_search_ctx *ctx;
+	runlist_element *rl, *rl2;
+	unsigned long flags;
+	int err, mp_size;
+	u32 attr_len = 0; /* Silence stupid gcc warning. */
+	bool mp_rebuilt;
+
+#ifdef DEBUG
+	read_lock_irqsave(&ni->size_lock, flags);
+	allocated_size = ni->allocated_size;
+	read_unlock_irqrestore(&ni->size_lock, flags);
+	ntfs_debug("Entering for i_ino 0x%lx, attribute type 0x%x, "
+			"old_allocated_size 0x%llx, "
+			"new_allocated_size 0x%llx, new_data_size 0x%llx, "
+			"data_start 0x%llx.", vi->i_ino,
+			(unsigned)le32_to_cpu(ni->type),
+			(unsigned long long)allocated_size,
+			(unsigned long long)new_alloc_size,
+			(unsigned long long)new_data_size,
+			(unsigned long long)start);
+#endif
+retry_extend:
+	/*
+	 * For non-resident attributes, @start and @new_size need to be aligned
+	 * to cluster boundaries for allocation purposes.
+	 */
+	if (NInoNonResident(ni)) {
+		if (start > 0)
+			start &= ~(s64)vol->cluster_size_mask;
+		new_alloc_size = (new_alloc_size + vol->cluster_size - 1) &
+				~(s64)vol->cluster_size_mask;
+	}
+	BUG_ON(new_data_size >= 0 && new_data_size > new_alloc_size);
+	/* Check if new size is allowed in $AttrDef. */
+	err = ntfs_attr_size_bounds_check(vol, ni->type, new_alloc_size);
+	if (unlikely(err)) {
+		/* Only emit errors when the write will fail completely. */
+		read_lock_irqsave(&ni->size_lock, flags);
+		allocated_size = ni->allocated_size;
+		read_unlock_irqrestore(&ni->size_lock, flags);
+		if (start < 0 || start >= allocated_size) {
+			if (err == -ERANGE) {
+				ntfs_error(vol->sb, "Cannot extend allocation "
+						"of inode 0x%lx, attribute "
+						"type 0x%x, because the new "
+						"allocation would exceed the "
+						"maximum allowed size for "
+						"this attribute type.",
+						vi->i_ino, (unsigned)
+						le32_to_cpu(ni->type));
+			} else {
+				ntfs_error(vol->sb, "Cannot extend allocation "
+						"of inode 0x%lx, attribute "
+						"type 0x%x, because this "
+						"attribute type is not "
+						"defined on the NTFS volume.  "
+						"Possible corruption!  You "
+						"should run chkdsk!",
+						vi->i_ino, (unsigned)
+						le32_to_cpu(ni->type));
+			}
+		}
+		/* Translate error code to be POSIX conformant for write(2). */
+		if (err == -ERANGE)
+			err = -EFBIG;
+		else
+			err = -EIO;
+		return err;
+	}
+	if (!NInoAttr(ni))
+		base_ni = ni;
+	else
+		base_ni = ni->ext.base_ntfs_ino;
+	/*
+	 * We will be modifying both the runlist (if non-resident) and the mft
+	 * record so lock them both down.
+	 */
+	down_write(&ni->runlist.lock);
+	m = map_mft_record(base_ni);
+	if (IS_ERR(m)) {
+		err = PTR_ERR(m);
+		m = NULL;
+		ctx = NULL;
+		goto err_out;
+	}
+	ctx = ntfs_attr_get_search_ctx(base_ni, m);
+	if (unlikely(!ctx)) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	read_lock_irqsave(&ni->size_lock, flags);
+	allocated_size = ni->allocated_size;
+	read_unlock_irqrestore(&ni->size_lock, flags);
+	/*
+	 * If non-resident, seek to the last extent.  If resident, there is
+	 * only one extent, so seek to that.
+	 */
+	vcn = NInoNonResident(ni) ? allocated_size >> vol->cluster_size_bits :
+			0;
+	/*
+	 * Abort if someone did the work whilst we waited for the locks.  If we
+	 * just converted the attribute from resident to non-resident it is
+	 * likely that exactly this has happened already.  We cannot quite
+	 * abort if we need to update the data size.
+	 */
+	if (unlikely(new_alloc_size <= allocated_size)) {
+		ntfs_debug("Allocated size already exceeds requested size.");
+		new_alloc_size = allocated_size;
+		if (new_data_size < 0)
+			goto done;
+		/*
+		 * We want the first attribute extent so that we can update the
+		 * data size.
+		 */
+		vcn = 0;
+	}
+	err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+			CASE_SENSITIVE, vcn, NULL, 0, ctx);
+	if (unlikely(err)) {
+		if (err == -ENOENT)
+			err = -EIO;
+		goto err_out;
+	}
+	m = ctx->mrec;
+	a = ctx->attr;
+	/* Use goto to reduce indentation. */
+	if (a->non_resident)
+		goto do_non_resident_extend;
+	BUG_ON(NInoNonResident(ni));
+	/* The total length of the attribute value. */
+	attr_len = le32_to_cpu(a->data.resident.value_length);
+	/*
+	 * Extend the attribute record to be able to store the new attribute
+	 * size.  ntfs_attr_record_resize() will not do anything if the size is
+	 * not changing.
+	 */
+	if (new_alloc_size < vol->mft_record_size &&
+			!ntfs_attr_record_resize(m, a,
+			le16_to_cpu(a->data.resident.value_offset) +
+			new_alloc_size)) {
+		/* The resize succeeded! */
+		write_lock_irqsave(&ni->size_lock, flags);
+		ni->allocated_size = le32_to_cpu(a->length) -
+				le16_to_cpu(a->data.resident.value_offset);
+		write_unlock_irqrestore(&ni->size_lock, flags);
+		if (new_data_size >= 0) {
+			BUG_ON(new_data_size < attr_len);
+			a->data.resident.value_length =
+					cpu_to_le32((u32)new_data_size);
+		}
+		goto flush_done;
+	}
+	/*
+	 * We have to drop all the locks so we can call
+	 * ntfs_attr_make_non_resident().  This could be optimised by try-
+	 * locking the first page cache page and only if that fails dropping
+	 * the locks, locking the page, and redoing all the locking and
+	 * lookups.  While this would be a huge optimisation, it is not worth
+	 * it as this is definitely a slow code path.
+	 */
+	ntfs_attr_put_search_ctx(ctx);
+	unmap_mft_record(base_ni);
+	up_write(&ni->runlist.lock);
+	/*
+	 * Not enough space in the mft record, try to make the attribute
+	 * non-resident and if successful restart the extension process.
+	 */
+	err = ntfs_attr_make_non_resident(ni, attr_len);
+	if (likely(!err))
+		goto retry_extend;
+	/*
+	 * Could not make non-resident.  If this is due to this not being
+	 * permitted for this attribute type or there not being enough space,
+	 * try to make other attributes non-resident.  Otherwise fail.
+	 */
+	if (unlikely(err != -EPERM && err != -ENOSPC)) {
+		/* Only emit errors when the write will fail completely. */
+		read_lock_irqsave(&ni->size_lock, flags);
+		allocated_size = ni->allocated_size;
+		read_unlock_irqrestore(&ni->size_lock, flags);
+		if (start < 0 || start >= allocated_size)
+			ntfs_error(vol->sb, "Cannot extend allocation of "
+					"inode 0x%lx, attribute type 0x%x, "
+					"because the conversion from resident "
+					"to non-resident attribute failed "
+					"with error code %i.", vi->i_ino,
+					(unsigned)le32_to_cpu(ni->type), err);
+		if (err != -ENOMEM)
+			err = -EIO;
+		goto conv_err_out;
+	}
+	/* TODO: Not implemented from here, abort. */
+	read_lock_irqsave(&ni->size_lock, flags);
+	allocated_size = ni->allocated_size;
+	read_unlock_irqrestore(&ni->size_lock, flags);
+	if (start < 0 || start >= allocated_size) {
+		if (err == -ENOSPC)
+			ntfs_error(vol->sb, "Not enough space in the mft "
+					"record/on disk for the non-resident "
+					"attribute value.  This case is not "
+					"implemented yet.");
+		else /* if (err == -EPERM) */
+			ntfs_error(vol->sb, "This attribute type may not be "
+					"non-resident.  This case is not "
+					"implemented yet.");
+	}
+	err = -EOPNOTSUPP;
+	goto conv_err_out;
+#if 0
+	// TODO: Attempt to make other attributes non-resident.
+	if (!err)
+		goto do_resident_extend;
+	/*
+	 * Both the attribute list attribute and the standard information
+	 * attribute must remain in the base inode.  Thus, if this is one of
+	 * these attributes, we have to try to move other attributes out into
+	 * extent mft records instead.
+	 */
+	if (ni->type == AT_ATTRIBUTE_LIST ||
+			ni->type == AT_STANDARD_INFORMATION) {
+		// TODO: Attempt to move other attributes into extent mft
+		// records.
+		err = -EOPNOTSUPP;
+		if (!err)
+			goto do_resident_extend;
+		goto err_out;
+	}
+	// TODO: Attempt to move this attribute to an extent mft record, but
+	// only if it is not already the only attribute in an mft record in
+	// which case there would be nothing to gain.
+	err = -EOPNOTSUPP;
+	if (!err)
+		goto do_resident_extend;
+	/* There is nothing we can do to make enough space. )-: */
+	goto err_out;
+#endif
+do_non_resident_extend:
+	BUG_ON(!NInoNonResident(ni));
+	if (new_alloc_size == allocated_size) {
+		BUG_ON(vcn);
+		goto alloc_done;
+	}
+	/*
+	 * If the data starts after the end of the old allocation, this is a
+	 * $DATA attribute and sparse attributes are enabled on the volume and
+	 * for this inode, then create a sparse region between the old
+	 * allocated size and the start of the data.  Otherwise simply proceed
+	 * with filling the whole space between the old allocated size and the
+	 * new allocated size with clusters.
+	 */
+	if ((start >= 0 && start <= allocated_size) || ni->type != AT_DATA ||
+			!NVolSparseEnabled(vol) || NInoSparseDisabled(ni))
+		goto skip_sparse;
+	// TODO: This is not implemented yet.  We just fill in with real
+	// clusters for now...
+	ntfs_debug("Inserting holes is not-implemented yet.  Falling back to "
+			"allocating real clusters instead.");
+skip_sparse:
+	rl = ni->runlist.rl;
+	if (likely(rl)) {
+		/* Seek to the end of the runlist. */
+		while (rl->length)
+			rl++;
+	}
+	/* If this attribute extent is not mapped, map it now. */
+	if (unlikely(!rl || rl->lcn == LCN_RL_NOT_MAPPED ||
+			(rl->lcn == LCN_ENOENT && rl > ni->runlist.rl &&
+			(rl-1)->lcn == LCN_RL_NOT_MAPPED))) {
+		if (!rl && !allocated_size)
+			goto first_alloc;
+		rl = ntfs_mapping_pairs_decompress(vol, a, ni->runlist.rl);
+		if (IS_ERR(rl)) {
+			err = PTR_ERR(rl);
+			if (start < 0 || start >= allocated_size)
+				ntfs_error(vol->sb, "Cannot extend allocation "
+						"of inode 0x%lx, attribute "
+						"type 0x%x, because the "
+						"mapping of a runlist "
+						"fragment failed with error "
+						"code %i.", vi->i_ino,
+						(unsigned)le32_to_cpu(ni->type),
+						err);
+			if (err != -ENOMEM)
+				err = -EIO;
+			goto err_out;
+		}
+		ni->runlist.rl = rl;
+		/* Seek to the end of the runlist. */
+		while (rl->length)
+			rl++;
+	}
+	/*
+	 * We now know the runlist of the last extent is mapped and @rl is at
+	 * the end of the runlist.  We want to begin allocating clusters
+	 * starting at the last allocated cluster to reduce fragmentation.  If
+	 * there are no valid LCNs in the attribute we let the cluster
+	 * allocator choose the starting cluster.
+	 */
+	/* If the last LCN is a hole or simillar seek back to last real LCN. */
+	while (rl->lcn < 0 && rl > ni->runlist.rl)
+		rl--;
+first_alloc:
+	// FIXME: Need to implement partial allocations so at least part of the
+	// write can be performed when start >= 0.  (Needed for POSIX write(2)
+	// conformance.)
+	rl2 = ntfs_cluster_alloc(vol, allocated_size >> vol->cluster_size_bits,
+			(new_alloc_size - allocated_size) >>
+			vol->cluster_size_bits, (rl && (rl->lcn >= 0)) ?
+			rl->lcn + rl->length : -1, DATA_ZONE, true);
+	if (IS_ERR(rl2)) {
+		err = PTR_ERR(rl2);
+		if (start < 0 || start >= allocated_size)
+			ntfs_error(vol->sb, "Cannot extend allocation of "
+					"inode 0x%lx, attribute type 0x%x, "
+					"because the allocation of clusters "
+					"failed with error code %i.", vi->i_ino,
+					(unsigned)le32_to_cpu(ni->type), err);
+		if (err != -ENOMEM && err != -ENOSPC)
+			err = -EIO;
+		goto err_out;
+	}
+	rl = ntfs_runlists_merge(ni->runlist.rl, rl2);
+	if (IS_ERR(rl)) {
+		err = PTR_ERR(rl);
+		if (start < 0 || start >= allocated_size)
+			ntfs_error(vol->sb, "Cannot extend allocation of "
+					"inode 0x%lx, attribute type 0x%x, "
+					"because the runlist merge failed "
+					"with error code %i.", vi->i_ino,
+					(unsigned)le32_to_cpu(ni->type), err);
+		if (err != -ENOMEM)
+			err = -EIO;
+		if (ntfs_cluster_free_from_rl(vol, rl2)) {
+			ntfs_error(vol->sb, "Failed to release allocated "
+					"cluster(s) in error code path.  Run "
+					"chkdsk to recover the lost "
+					"cluster(s).");
+			NVolSetErrors(vol);
+		}
+		ntfs_free(rl2);
+		goto err_out;
+	}
+	ni->runlist.rl = rl;
+	ntfs_debug("Allocated 0x%llx clusters.", (long long)(new_alloc_size -
+			allocated_size) >> vol->cluster_size_bits);
+	/* Find the runlist element with which the attribute extent starts. */
+	ll = sle64_to_cpu(a->data.non_resident.lowest_vcn);
+	rl2 = ntfs_rl_find_vcn_nolock(rl, ll);
+	BUG_ON(!rl2);
+	BUG_ON(!rl2->length);
+	BUG_ON(rl2->lcn < LCN_HOLE);
+	mp_rebuilt = false;
+	/* Get the size for the new mapping pairs array for this extent. */
+	mp_size = ntfs_get_size_for_mapping_pairs(vol, rl2, ll, -1);
+	if (unlikely(mp_size <= 0)) {
+		err = mp_size;
+		if (start < 0 || start >= allocated_size)
+			ntfs_error(vol->sb, "Cannot extend allocation of "
+					"inode 0x%lx, attribute type 0x%x, "
+					"because determining the size for the "
+					"mapping pairs failed with error code "
+					"%i.", vi->i_ino,
+					(unsigned)le32_to_cpu(ni->type), err);
+		err = -EIO;
+		goto undo_alloc;
+	}
+	/* Extend the attribute record to fit the bigger mapping pairs array. */
+	attr_len = le32_to_cpu(a->length);
+	err = ntfs_attr_record_resize(m, a, mp_size +
+			le16_to_cpu(a->data.non_resident.mapping_pairs_offset));
+	if (unlikely(err)) {
+		BUG_ON(err != -ENOSPC);
+		// TODO: Deal with this by moving this extent to a new mft
+		// record or by starting a new extent in a new mft record,
+		// possibly by extending this extent partially and filling it
+		// and creating a new extent for the remainder, or by making
+		// other attributes non-resident and/or by moving other
+		// attributes out of this mft record.
+		if (start < 0 || start >= allocated_size)
+			ntfs_error(vol->sb, "Not enough space in the mft "
+					"record for the extended attribute "
+					"record.  This case is not "
+					"implemented yet.");
+		err = -EOPNOTSUPP;
+		goto undo_alloc;
+	}
+	mp_rebuilt = true;
+	/* Generate the mapping pairs array directly into the attr record. */
+	err = ntfs_mapping_pairs_build(vol, (u8*)a +
+			le16_to_cpu(a->data.non_resident.mapping_pairs_offset),
+			mp_size, rl2, ll, -1, NULL);
+	if (unlikely(err)) {
+		if (start < 0 || start >= allocated_size)
+			ntfs_error(vol->sb, "Cannot extend allocation of "
+					"inode 0x%lx, attribute type 0x%x, "
+					"because building the mapping pairs "
+					"failed with error code %i.", vi->i_ino,
+					(unsigned)le32_to_cpu(ni->type), err);
+		err = -EIO;
+		goto undo_alloc;
+	}
+	/* Update the highest_vcn. */
+	a->data.non_resident.highest_vcn = cpu_to_sle64((new_alloc_size >>
+			vol->cluster_size_bits) - 1);
+	/*
+	 * We now have extended the allocated size of the attribute.  Reflect
+	 * this in the ntfs_inode structure and the attribute record.
+	 */
+	if (a->data.non_resident.lowest_vcn) {
+		/*
+		 * We are not in the first attribute extent, switch to it, but
+		 * first ensure the changes will make it to disk later.
+		 */
+		flush_dcache_mft_record_page(ctx->ntfs_ino);
+		mark_mft_record_dirty(ctx->ntfs_ino);
+		ntfs_attr_reinit_search_ctx(ctx);
+		err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+				CASE_SENSITIVE, 0, NULL, 0, ctx);
+		if (unlikely(err))
+			goto restore_undo_alloc;
+		/* @m is not used any more so no need to set it. */
+		a = ctx->attr;
+	}
+	write_lock_irqsave(&ni->size_lock, flags);
+	ni->allocated_size = new_alloc_size;
+	a->data.non_resident.allocated_size = cpu_to_sle64(new_alloc_size);
+	/*
+	 * FIXME: This would fail if @ni is a directory, $MFT, or an index,
+	 * since those can have sparse/compressed set.  For example can be
+	 * set compressed even though it is not compressed itself and in that
+	 * case the bit means that files are to be created compressed in the
+	 * directory...  At present this is ok as this code is only called for
+	 * regular files, and only for their $DATA attribute(s).
+	 * FIXME: The calculation is wrong if we created a hole above.  For now
+	 * it does not matter as we never create holes.
+	 */
+	if (NInoSparse(ni) || NInoCompressed(ni)) {
+		ni->itype.compressed.size += new_alloc_size - allocated_size;
+		a->data.non_resident.compressed_size =
+				cpu_to_sle64(ni->itype.compressed.size);
+		vi->i_blocks = ni->itype.compressed.size >> 9;
+	} else
+		vi->i_blocks = new_alloc_size >> 9;
+	write_unlock_irqrestore(&ni->size_lock, flags);
+alloc_done:
+	if (new_data_size >= 0) {
+		BUG_ON(new_data_size <
+				sle64_to_cpu(a->data.non_resident.data_size));
+		a->data.non_resident.data_size = cpu_to_sle64(new_data_size);
+	}
+flush_done:
+	/* Ensure the changes make it to disk. */
+	flush_dcache_mft_record_page(ctx->ntfs_ino);
+	mark_mft_record_dirty(ctx->ntfs_ino);
+done:
+	ntfs_attr_put_search_ctx(ctx);
+	unmap_mft_record(base_ni);
+	up_write(&ni->runlist.lock);
+	ntfs_debug("Done, new_allocated_size 0x%llx.",
+			(unsigned long long)new_alloc_size);
+	return new_alloc_size;
+restore_undo_alloc:
+	if (start < 0 || start >= allocated_size)
+		ntfs_error(vol->sb, "Cannot complete extension of allocation "
+				"of inode 0x%lx, attribute type 0x%x, because "
+				"lookup of first attribute extent failed with "
+				"error code %i.", vi->i_ino,
+				(unsigned)le32_to_cpu(ni->type), err);
+	if (err == -ENOENT)
+		err = -EIO;
+	ntfs_attr_reinit_search_ctx(ctx);
+	if (ntfs_attr_lookup(ni->type, ni->name, ni->name_len, CASE_SENSITIVE,
+			allocated_size >> vol->cluster_size_bits, NULL, 0,
+			ctx)) {
+		ntfs_error(vol->sb, "Failed to find last attribute extent of "
+				"attribute in error code path.  Run chkdsk to "
+				"recover.");
+		write_lock_irqsave(&ni->size_lock, flags);
+		ni->allocated_size = new_alloc_size;
+		/*
+		 * FIXME: This would fail if @ni is a directory...  See above.
+		 * FIXME: The calculation is wrong if we created a hole above.
+		 * For now it does not matter as we never create holes.
+		 */
+		if (NInoSparse(ni) || NInoCompressed(ni)) {
+			ni->itype.compressed.size += new_alloc_size -
+					allocated_size;
+			vi->i_blocks = ni->itype.compressed.size >> 9;
+		} else
+			vi->i_blocks = new_alloc_size >> 9;
+		write_unlock_irqrestore(&ni->size_lock, flags);
+		ntfs_attr_put_search_ctx(ctx);
+		unmap_mft_record(base_ni);
+		up_write(&ni->runlist.lock);
+		/*
+		 * The only thing that is now wrong is the allocated size of the
+		 * base attribute extent which chkdsk should be able to fix.
+		 */
+		NVolSetErrors(vol);
+		return err;
+	}
+	ctx->attr->data.non_resident.highest_vcn = cpu_to_sle64(
+			(allocated_size >> vol->cluster_size_bits) - 1);
+undo_alloc:
+	ll = allocated_size >> vol->cluster_size_bits;
+	if (ntfs_cluster_free(ni, ll, -1, ctx) < 0) {
+		ntfs_error(vol->sb, "Failed to release allocated cluster(s) "
+				"in error code path.  Run chkdsk to recover "
+				"the lost cluster(s).");
+		NVolSetErrors(vol);
+	}
+	m = ctx->mrec;
+	a = ctx->attr;
+	/*
+	 * If the runlist truncation fails and/or the search context is no
+	 * longer valid, we cannot resize the attribute record or build the
+	 * mapping pairs array thus we mark the inode bad so that no access to
+	 * the freed clusters can happen.
+	 */
+	if (ntfs_rl_truncate_nolock(vol, &ni->runlist, ll) || IS_ERR(m)) {
+		ntfs_error(vol->sb, "Failed to %s in error code path.  Run "
+				"chkdsk to recover.", IS_ERR(m) ?
+				"restore attribute search context" :
+				"truncate attribute runlist");
+		NVolSetErrors(vol);
+	} else if (mp_rebuilt) {
+		if (ntfs_attr_record_resize(m, a, attr_len)) {
+			ntfs_error(vol->sb, "Failed to restore attribute "
+					"record in error code path.  Run "
+					"chkdsk to recover.");
+			NVolSetErrors(vol);
+		} else /* if (success) */ {
+			if (ntfs_mapping_pairs_build(vol, (u8*)a + le16_to_cpu(
+					a->data.non_resident.
+					mapping_pairs_offset), attr_len -
+					le16_to_cpu(a->data.non_resident.
+					mapping_pairs_offset), rl2, ll, -1,
+					NULL)) {
+				ntfs_error(vol->sb, "Failed to restore "
+						"mapping pairs array in error "
+						"code path.  Run chkdsk to "
+						"recover.");
+				NVolSetErrors(vol);
+			}
+			flush_dcache_mft_record_page(ctx->ntfs_ino);
+			mark_mft_record_dirty(ctx->ntfs_ino);
+		}
+	}
+err_out:
+	if (ctx)
+		ntfs_attr_put_search_ctx(ctx);
+	if (m)
+		unmap_mft_record(base_ni);
+	up_write(&ni->runlist.lock);
+conv_err_out:
+	ntfs_debug("Failed.  Returning error code %i.", err);
+	return err;
+}
+
+/**
+ * ntfs_attr_set - fill (a part of) an attribute with a byte
+ * @ni:		ntfs inode describing the attribute to fill
+ * @ofs:	offset inside the attribute at which to start to fill
+ * @cnt:	number of bytes to fill
+ * @val:	the unsigned 8-bit value with which to fill the attribute
+ *
+ * Fill @cnt bytes of the attribute described by the ntfs inode @ni starting at
+ * byte offset @ofs inside the attribute with the constant byte @val.
+ *
+ * This function is effectively like memset() applied to an ntfs attribute.
+ * Note thie function actually only operates on the page cache pages belonging
+ * to the ntfs attribute and it marks them dirty after doing the memset().
+ * Thus it relies on the vm dirty page write code paths to cause the modified
+ * pages to be written to the mft record/disk.
+ *
+ * Return 0 on success and -errno on error.  An error code of -ESPIPE means
+ * that @ofs + @cnt were outside the end of the attribute and no write was
+ * performed.
+ */
+int ntfs_attr_set(ntfs_inode *ni, const s64 ofs, const s64 cnt, const u8 val)
+{
+	ntfs_volume *vol = ni->vol;
+	struct address_space *mapping;
+	struct page *page;
+	u8 *kaddr;
+	pgoff_t idx, end;
+	unsigned start_ofs, end_ofs, size;
+
+	ntfs_debug("Entering for ofs 0x%llx, cnt 0x%llx, val 0x%hx.",
+			(long long)ofs, (long long)cnt, val);
+	BUG_ON(ofs < 0);
+	BUG_ON(cnt < 0);
+	if (!cnt)
+		goto done;
+	/*
+	 * FIXME: Compressed and encrypted attributes are not supported when
+	 * writing and we should never have gotten here for them.
+	 */
+	BUG_ON(NInoCompressed(ni));
+	BUG_ON(NInoEncrypted(ni));
+	mapping = VFS_I(ni)->i_mapping;
+	/* Work out the starting index and page offset. */
+	idx = ofs >> PAGE_SHIFT;
+	start_ofs = ofs & ~PAGE_MASK;
+	/* Work out the ending index and page offset. */
+	end = ofs + cnt;
+	end_ofs = end & ~PAGE_MASK;
+	/* If the end is outside the inode size return -ESPIPE. */
+	if (unlikely(end > i_size_read(VFS_I(ni)))) {
+		ntfs_error(vol->sb, "Request exceeds end of attribute.");
+		return -ESPIPE;
+	}
+	end >>= PAGE_SHIFT;
+	/* If there is a first partial page, need to do it the slow way. */
+	if (start_ofs) {
+		page = read_mapping_page(mapping, idx, NULL);
+		if (IS_ERR(page)) {
+			ntfs_error(vol->sb, "Failed to read first partial "
+					"page (error, index 0x%lx).", idx);
+			return PTR_ERR(page);
+		}
+		/*
+		 * If the last page is the same as the first page, need to
+		 * limit the write to the end offset.
+		 */
+		size = PAGE_SIZE;
+		if (idx == end)
+			size = end_ofs;
+		kaddr = kmap_atomic(page);
+		memset(kaddr + start_ofs, val, size - start_ofs);
+		flush_dcache_page(page);
+		kunmap_atomic(kaddr);
+		set_page_dirty(page);
+		put_page(page);
+		balance_dirty_pages_ratelimited(mapping);
+		cond_resched();
+		if (idx == end)
+			goto done;
+		idx++;
+	}
+	/* Do the whole pages the fast way. */
+	for (; idx < end; idx++) {
+		/* Find or create the current page.  (The page is locked.) */
+		page = grab_cache_page(mapping, idx);
+		if (unlikely(!page)) {
+			ntfs_error(vol->sb, "Insufficient memory to grab "
+					"page (index 0x%lx).", idx);
+			return -ENOMEM;
+		}
+		kaddr = kmap_atomic(page);
+		memset(kaddr, val, PAGE_SIZE);
+		flush_dcache_page(page);
+		kunmap_atomic(kaddr);
+		/*
+		 * If the page has buffers, mark them uptodate since buffer
+		 * state and not page state is definitive in 2.6 kernels.
+		 */
+		if (page_has_buffers(page)) {
+			struct buffer_head *bh, *head;
+
+			bh = head = page_buffers(page);
+			do {
+				set_buffer_uptodate(bh);
+			} while ((bh = bh->b_this_page) != head);
+		}
+		/* Now that buffers are uptodate, set the page uptodate, too. */
+		SetPageUptodate(page);
+		/*
+		 * Set the page and all its buffers dirty and mark the inode
+		 * dirty, too.  The VM will write the page later on.
+		 */
+		set_page_dirty(page);
+		/* Finally unlock and release the page. */
+		unlock_page(page);
+		put_page(page);
+		balance_dirty_pages_ratelimited(mapping);
+		cond_resched();
+	}
+	/* If there is a last partial page, need to do it the slow way. */
+	if (end_ofs) {
+		page = read_mapping_page(mapping, idx, NULL);
+		if (IS_ERR(page)) {
+			ntfs_error(vol->sb, "Failed to read last partial page "
+					"(error, index 0x%lx).", idx);
+			return PTR_ERR(page);
+		}
+		kaddr = kmap_atomic(page);
+		memset(kaddr, val, end_ofs);
+		flush_dcache_page(page);
+		kunmap_atomic(kaddr);
+		set_page_dirty(page);
+		put_page(page);
+		balance_dirty_pages_ratelimited(mapping);
+		cond_resched();
+	}
+done:
+	ntfs_debug("Done.");
+	return 0;
+}
+
+#endif /* NTFS_RW */