Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 884 insertions, 0 deletions

diff --git a/sound/soc/codecs/nau8540.c b/sound/soc/codecs/nau8540.c
new file mode 100644
index 000000000..ace96995f
--- /dev/null
+++ b/sound/soc/codecs/nau8540.c
@@ -0,0 +1,884 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NAU85L40 ALSA SoC audio driver
+ *
+ * Copyright 2016 Nuvoton Technology Corp.
+ * Author: John Hsu <KCHSU0@nuvoton.com>
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include "nau8540.h"
+
+
+#define NAU_FREF_MAX 13500000
+#define NAU_FVCO_MAX 100000000
+#define NAU_FVCO_MIN 90000000
+
+/* the maximum frequency of CLK_ADC */
+#define CLK_ADC_MAX 6144000
+
+/* scaling for mclk from sysclk_src output */
+static const struct nau8540_fll_attr mclk_src_scaling[] = {
+	{ 1, 0x0 },
+	{ 2, 0x2 },
+	{ 4, 0x3 },
+	{ 8, 0x4 },
+	{ 16, 0x5 },
+	{ 32, 0x6 },
+	{ 3, 0x7 },
+	{ 6, 0xa },
+	{ 12, 0xb },
+	{ 24, 0xc },
+};
+
+/* ratio for input clk freq */
+static const struct nau8540_fll_attr fll_ratio[] = {
+	{ 512000, 0x01 },
+	{ 256000, 0x02 },
+	{ 128000, 0x04 },
+	{ 64000, 0x08 },
+	{ 32000, 0x10 },
+	{ 8000, 0x20 },
+	{ 4000, 0x40 },
+};
+
+static const struct nau8540_fll_attr fll_pre_scalar[] = {
+	{ 1, 0x0 },
+	{ 2, 0x1 },
+	{ 4, 0x2 },
+	{ 8, 0x3 },
+};
+
+/* over sampling rate */
+static const struct nau8540_osr_attr osr_adc_sel[] = {
+	{ 32, 3 },	/* OSR 32, SRC 1/8 */
+	{ 64, 2 },	/* OSR 64, SRC 1/4 */
+	{ 128, 1 },	/* OSR 128, SRC 1/2 */
+	{ 256, 0 },	/* OSR 256, SRC 1 */
+};
+
+static const struct reg_default nau8540_reg_defaults[] = {
+	{NAU8540_REG_POWER_MANAGEMENT, 0x0000},
+	{NAU8540_REG_CLOCK_CTRL, 0x0000},
+	{NAU8540_REG_CLOCK_SRC, 0x0000},
+	{NAU8540_REG_FLL1, 0x0001},
+	{NAU8540_REG_FLL2, 0x3126},
+	{NAU8540_REG_FLL3, 0x0008},
+	{NAU8540_REG_FLL4, 0x0010},
+	{NAU8540_REG_FLL5, 0xC000},
+	{NAU8540_REG_FLL6, 0x6000},
+	{NAU8540_REG_FLL_VCO_RSV, 0xF13C},
+	{NAU8540_REG_PCM_CTRL0, 0x000B},
+	{NAU8540_REG_PCM_CTRL1, 0x3010},
+	{NAU8540_REG_PCM_CTRL2, 0x0800},
+	{NAU8540_REG_PCM_CTRL3, 0x0000},
+	{NAU8540_REG_PCM_CTRL4, 0x000F},
+	{NAU8540_REG_ALC_CONTROL_1, 0x0000},
+	{NAU8540_REG_ALC_CONTROL_2, 0x700B},
+	{NAU8540_REG_ALC_CONTROL_3, 0x0022},
+	{NAU8540_REG_ALC_CONTROL_4, 0x1010},
+	{NAU8540_REG_ALC_CONTROL_5, 0x1010},
+	{NAU8540_REG_NOTCH_FIL1_CH1, 0x0000},
+	{NAU8540_REG_NOTCH_FIL2_CH1, 0x0000},
+	{NAU8540_REG_NOTCH_FIL1_CH2, 0x0000},
+	{NAU8540_REG_NOTCH_FIL2_CH2, 0x0000},
+	{NAU8540_REG_NOTCH_FIL1_CH3, 0x0000},
+	{NAU8540_REG_NOTCH_FIL2_CH3, 0x0000},
+	{NAU8540_REG_NOTCH_FIL1_CH4, 0x0000},
+	{NAU8540_REG_NOTCH_FIL2_CH4, 0x0000},
+	{NAU8540_REG_HPF_FILTER_CH12, 0x0000},
+	{NAU8540_REG_HPF_FILTER_CH34, 0x0000},
+	{NAU8540_REG_ADC_SAMPLE_RATE, 0x0002},
+	{NAU8540_REG_DIGITAL_GAIN_CH1, 0x0400},
+	{NAU8540_REG_DIGITAL_GAIN_CH2, 0x0400},
+	{NAU8540_REG_DIGITAL_GAIN_CH3, 0x0400},
+	{NAU8540_REG_DIGITAL_GAIN_CH4, 0x0400},
+	{NAU8540_REG_DIGITAL_MUX, 0x00E4},
+	{NAU8540_REG_GPIO_CTRL, 0x0000},
+	{NAU8540_REG_MISC_CTRL, 0x0000},
+	{NAU8540_REG_I2C_CTRL, 0xEFFF},
+	{NAU8540_REG_VMID_CTRL, 0x0000},
+	{NAU8540_REG_MUTE, 0x0000},
+	{NAU8540_REG_ANALOG_ADC1, 0x0011},
+	{NAU8540_REG_ANALOG_ADC2, 0x0020},
+	{NAU8540_REG_ANALOG_PWR, 0x0000},
+	{NAU8540_REG_MIC_BIAS, 0x0004},
+	{NAU8540_REG_REFERENCE, 0x0000},
+	{NAU8540_REG_FEPGA1, 0x0000},
+	{NAU8540_REG_FEPGA2, 0x0000},
+	{NAU8540_REG_FEPGA3, 0x0101},
+	{NAU8540_REG_FEPGA4, 0x0101},
+	{NAU8540_REG_PWR, 0x0000},
+};
+
+static bool nau8540_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case NAU8540_REG_POWER_MANAGEMENT ... NAU8540_REG_FLL_VCO_RSV:
+	case NAU8540_REG_PCM_CTRL0 ... NAU8540_REG_PCM_CTRL4:
+	case NAU8540_REG_ALC_CONTROL_1 ... NAU8540_REG_ALC_CONTROL_5:
+	case NAU8540_REG_ALC_GAIN_CH12 ... NAU8540_REG_ADC_SAMPLE_RATE:
+	case NAU8540_REG_DIGITAL_GAIN_CH1 ... NAU8540_REG_DIGITAL_MUX:
+	case NAU8540_REG_P2P_CH1 ... NAU8540_REG_I2C_CTRL:
+	case NAU8540_REG_I2C_DEVICE_ID:
+	case NAU8540_REG_VMID_CTRL ... NAU8540_REG_MUTE:
+	case NAU8540_REG_ANALOG_ADC1 ... NAU8540_REG_PWR:
+		return true;
+	default:
+		return false;
+	}
+
+}
+
+static bool nau8540_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case NAU8540_REG_SW_RESET ... NAU8540_REG_FLL_VCO_RSV:
+	case NAU8540_REG_PCM_CTRL0 ... NAU8540_REG_PCM_CTRL4:
+	case NAU8540_REG_ALC_CONTROL_1 ... NAU8540_REG_ALC_CONTROL_5:
+	case NAU8540_REG_NOTCH_FIL1_CH1 ... NAU8540_REG_ADC_SAMPLE_RATE:
+	case NAU8540_REG_DIGITAL_GAIN_CH1 ... NAU8540_REG_DIGITAL_MUX:
+	case NAU8540_REG_GPIO_CTRL ... NAU8540_REG_I2C_CTRL:
+	case NAU8540_REG_RST:
+	case NAU8540_REG_VMID_CTRL ... NAU8540_REG_MUTE:
+	case NAU8540_REG_ANALOG_ADC1 ... NAU8540_REG_PWR:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool nau8540_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case NAU8540_REG_SW_RESET:
+	case NAU8540_REG_ALC_GAIN_CH12 ... NAU8540_REG_ALC_STATUS:
+	case NAU8540_REG_P2P_CH1 ... NAU8540_REG_PEAK_CH4:
+	case NAU8540_REG_I2C_DEVICE_ID:
+	case NAU8540_REG_RST:
+		return true;
+	default:
+		return false;
+	}
+}
+
+
+static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -12800, 3600);
+static const DECLARE_TLV_DB_MINMAX(fepga_gain_tlv, -100, 3600);
+
+static const struct snd_kcontrol_new nau8540_snd_controls[] = {
+	SOC_SINGLE_TLV("Mic1 Volume", NAU8540_REG_DIGITAL_GAIN_CH1,
+		0, 0x520, 0, adc_vol_tlv),
+	SOC_SINGLE_TLV("Mic2 Volume", NAU8540_REG_DIGITAL_GAIN_CH2,
+		0, 0x520, 0, adc_vol_tlv),
+	SOC_SINGLE_TLV("Mic3 Volume", NAU8540_REG_DIGITAL_GAIN_CH3,
+		0, 0x520, 0, adc_vol_tlv),
+	SOC_SINGLE_TLV("Mic4 Volume", NAU8540_REG_DIGITAL_GAIN_CH4,
+		0, 0x520, 0, adc_vol_tlv),
+
+	SOC_SINGLE_TLV("Frontend PGA1 Volume", NAU8540_REG_FEPGA3,
+		0, 0x25, 0, fepga_gain_tlv),
+	SOC_SINGLE_TLV("Frontend PGA2 Volume", NAU8540_REG_FEPGA3,
+		8, 0x25, 0, fepga_gain_tlv),
+	SOC_SINGLE_TLV("Frontend PGA3 Volume", NAU8540_REG_FEPGA4,
+		0, 0x25, 0, fepga_gain_tlv),
+	SOC_SINGLE_TLV("Frontend PGA4 Volume", NAU8540_REG_FEPGA4,
+		8, 0x25, 0, fepga_gain_tlv),
+};
+
+static const char * const adc_channel[] = {
+	"ADC channel 1", "ADC channel 2", "ADC channel 3", "ADC channel 4"
+};
+static SOC_ENUM_SINGLE_DECL(
+	digital_ch4_enum, NAU8540_REG_DIGITAL_MUX, 6, adc_channel);
+
+static const struct snd_kcontrol_new digital_ch4_mux =
+	SOC_DAPM_ENUM("Digital CH4 Select", digital_ch4_enum);
+
+static SOC_ENUM_SINGLE_DECL(
+	digital_ch3_enum, NAU8540_REG_DIGITAL_MUX, 4, adc_channel);
+
+static const struct snd_kcontrol_new digital_ch3_mux =
+	SOC_DAPM_ENUM("Digital CH3 Select", digital_ch3_enum);
+
+static SOC_ENUM_SINGLE_DECL(
+	digital_ch2_enum, NAU8540_REG_DIGITAL_MUX, 2, adc_channel);
+
+static const struct snd_kcontrol_new digital_ch2_mux =
+	SOC_DAPM_ENUM("Digital CH2 Select", digital_ch2_enum);
+
+static SOC_ENUM_SINGLE_DECL(
+	digital_ch1_enum, NAU8540_REG_DIGITAL_MUX, 0, adc_channel);
+
+static const struct snd_kcontrol_new digital_ch1_mux =
+	SOC_DAPM_ENUM("Digital CH1 Select", digital_ch1_enum);
+
+static int adc_power_control(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *k, int  event)
+{
+	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+	struct nau8540 *nau8540 = snd_soc_component_get_drvdata(component);
+
+	if (SND_SOC_DAPM_EVENT_ON(event)) {
+		msleep(300);
+		/* DO12 and DO34 pad output enable */
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL1,
+			NAU8540_I2S_DO12_TRI, 0);
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL2,
+			NAU8540_I2S_DO34_TRI, 0);
+	} else if (SND_SOC_DAPM_EVENT_OFF(event)) {
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL1,
+			NAU8540_I2S_DO12_TRI, NAU8540_I2S_DO12_TRI);
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL2,
+			NAU8540_I2S_DO34_TRI, NAU8540_I2S_DO34_TRI);
+	}
+	return 0;
+}
+
+static int aiftx_power_control(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *k, int  event)
+{
+	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+	struct nau8540 *nau8540 = snd_soc_component_get_drvdata(component);
+
+	if (SND_SOC_DAPM_EVENT_OFF(event)) {
+		regmap_write(nau8540->regmap, NAU8540_REG_RST, 0x0001);
+		regmap_write(nau8540->regmap, NAU8540_REG_RST, 0x0000);
+	}
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget nau8540_dapm_widgets[] = {
+	SND_SOC_DAPM_SUPPLY("MICBIAS2", NAU8540_REG_MIC_BIAS, 11, 0, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("MICBIAS1", NAU8540_REG_MIC_BIAS, 10, 0, NULL, 0),
+
+	SND_SOC_DAPM_INPUT("MIC1"),
+	SND_SOC_DAPM_INPUT("MIC2"),
+	SND_SOC_DAPM_INPUT("MIC3"),
+	SND_SOC_DAPM_INPUT("MIC4"),
+
+	SND_SOC_DAPM_PGA("Frontend PGA1", NAU8540_REG_PWR, 12, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Frontend PGA2", NAU8540_REG_PWR, 13, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Frontend PGA3", NAU8540_REG_PWR, 14, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Frontend PGA4", NAU8540_REG_PWR, 15, 0, NULL, 0),
+
+	SND_SOC_DAPM_ADC_E("ADC1", NULL,
+		NAU8540_REG_POWER_MANAGEMENT, 0, 0, adc_power_control,
+		SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_ADC_E("ADC2", NULL,
+		NAU8540_REG_POWER_MANAGEMENT, 1, 0, adc_power_control,
+		SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_ADC_E("ADC3", NULL,
+		NAU8540_REG_POWER_MANAGEMENT, 2, 0, adc_power_control,
+		SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_ADC_E("ADC4", NULL,
+		NAU8540_REG_POWER_MANAGEMENT, 3, 0, adc_power_control,
+		SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+	SND_SOC_DAPM_PGA("ADC CH1", NAU8540_REG_ANALOG_PWR, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("ADC CH2", NAU8540_REG_ANALOG_PWR, 1, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("ADC CH3", NAU8540_REG_ANALOG_PWR, 2, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("ADC CH4", NAU8540_REG_ANALOG_PWR, 3, 0, NULL, 0),
+
+	SND_SOC_DAPM_MUX("Digital CH4 Mux",
+		SND_SOC_NOPM, 0, 0, &digital_ch4_mux),
+	SND_SOC_DAPM_MUX("Digital CH3 Mux",
+		SND_SOC_NOPM, 0, 0, &digital_ch3_mux),
+	SND_SOC_DAPM_MUX("Digital CH2 Mux",
+		SND_SOC_NOPM, 0, 0, &digital_ch2_mux),
+	SND_SOC_DAPM_MUX("Digital CH1 Mux",
+		SND_SOC_NOPM, 0, 0, &digital_ch1_mux),
+
+	SND_SOC_DAPM_AIF_OUT_E("AIFTX", "Capture", 0, SND_SOC_NOPM, 0, 0,
+		aiftx_power_control, SND_SOC_DAPM_POST_PMD),
+};
+
+static const struct snd_soc_dapm_route nau8540_dapm_routes[] = {
+	{"Frontend PGA1", NULL, "MIC1"},
+	{"Frontend PGA2", NULL, "MIC2"},
+	{"Frontend PGA3", NULL, "MIC3"},
+	{"Frontend PGA4", NULL, "MIC4"},
+
+	{"ADC1", NULL, "Frontend PGA1"},
+	{"ADC2", NULL, "Frontend PGA2"},
+	{"ADC3", NULL, "Frontend PGA3"},
+	{"ADC4", NULL, "Frontend PGA4"},
+
+	{"ADC CH1", NULL, "ADC1"},
+	{"ADC CH2", NULL, "ADC2"},
+	{"ADC CH3", NULL, "ADC3"},
+	{"ADC CH4", NULL, "ADC4"},
+
+	{"ADC1", NULL, "MICBIAS1"},
+	{"ADC2", NULL, "MICBIAS1"},
+	{"ADC3", NULL, "MICBIAS2"},
+	{"ADC4", NULL, "MICBIAS2"},
+
+	{"Digital CH1 Mux", "ADC channel 1", "ADC CH1"},
+	{"Digital CH1 Mux", "ADC channel 2", "ADC CH2"},
+	{"Digital CH1 Mux", "ADC channel 3", "ADC CH3"},
+	{"Digital CH1 Mux", "ADC channel 4", "ADC CH4"},
+
+	{"Digital CH2 Mux", "ADC channel 1", "ADC CH1"},
+	{"Digital CH2 Mux", "ADC channel 2", "ADC CH2"},
+	{"Digital CH2 Mux", "ADC channel 3", "ADC CH3"},
+	{"Digital CH2 Mux", "ADC channel 4", "ADC CH4"},
+
+	{"Digital CH3 Mux", "ADC channel 1", "ADC CH1"},
+	{"Digital CH3 Mux", "ADC channel 2", "ADC CH2"},
+	{"Digital CH3 Mux", "ADC channel 3", "ADC CH3"},
+	{"Digital CH3 Mux", "ADC channel 4", "ADC CH4"},
+
+	{"Digital CH4 Mux", "ADC channel 1", "ADC CH1"},
+	{"Digital CH4 Mux", "ADC channel 2", "ADC CH2"},
+	{"Digital CH4 Mux", "ADC channel 3", "ADC CH3"},
+	{"Digital CH4 Mux", "ADC channel 4", "ADC CH4"},
+
+	{"AIFTX", NULL, "Digital CH1 Mux"},
+	{"AIFTX", NULL, "Digital CH2 Mux"},
+	{"AIFTX", NULL, "Digital CH3 Mux"},
+	{"AIFTX", NULL, "Digital CH4 Mux"},
+};
+
+static int nau8540_clock_check(struct nau8540 *nau8540, int rate, int osr)
+{
+	if (osr >= ARRAY_SIZE(osr_adc_sel))
+		return -EINVAL;
+
+	if (rate * osr > CLK_ADC_MAX) {
+		dev_err(nau8540->dev, "exceed the maximum frequency of CLK_ADC\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int nau8540_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct nau8540 *nau8540 = snd_soc_component_get_drvdata(component);
+	unsigned int val_len = 0, osr;
+
+	/* CLK_ADC = OSR * FS
+	 * ADC clock frequency is defined as Over Sampling Rate (OSR)
+	 * multiplied by the audio sample rate (Fs). Note that the OSR and Fs
+	 * values must be selected such that the maximum frequency is less
+	 * than 6.144 MHz.
+	 */
+	regmap_read(nau8540->regmap, NAU8540_REG_ADC_SAMPLE_RATE, &osr);
+	osr &= NAU8540_ADC_OSR_MASK;
+	if (nau8540_clock_check(nau8540, params_rate(params), osr))
+		return -EINVAL;
+	regmap_update_bits(nau8540->regmap, NAU8540_REG_CLOCK_SRC,
+		NAU8540_CLK_ADC_SRC_MASK,
+		osr_adc_sel[osr].clk_src << NAU8540_CLK_ADC_SRC_SFT);
+
+	switch (params_width(params)) {
+	case 16:
+		val_len |= NAU8540_I2S_DL_16;
+		break;
+	case 20:
+		val_len |= NAU8540_I2S_DL_20;
+		break;
+	case 24:
+		val_len |= NAU8540_I2S_DL_24;
+		break;
+	case 32:
+		val_len |= NAU8540_I2S_DL_32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL0,
+		NAU8540_I2S_DL_MASK, val_len);
+
+	return 0;
+}
+
+static int nau8540_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct snd_soc_component *component = dai->component;
+	struct nau8540 *nau8540 = snd_soc_component_get_drvdata(component);
+	unsigned int ctrl1_val = 0, ctrl2_val = 0;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		ctrl2_val |= NAU8540_I2S_MS_MASTER;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		ctrl1_val |= NAU8540_I2S_BP_INV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		ctrl1_val |= NAU8540_I2S_DF_I2S;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		ctrl1_val |= NAU8540_I2S_DF_LEFT;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		ctrl1_val |= NAU8540_I2S_DF_RIGTH;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		ctrl1_val |= NAU8540_I2S_DF_PCM_AB;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		ctrl1_val |= NAU8540_I2S_DF_PCM_AB;
+		ctrl1_val |= NAU8540_I2S_PCMB_EN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL0,
+		NAU8540_I2S_DL_MASK | NAU8540_I2S_DF_MASK |
+		NAU8540_I2S_BP_INV | NAU8540_I2S_PCMB_EN, ctrl1_val);
+	regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL1,
+		NAU8540_I2S_MS_MASK | NAU8540_I2S_DO12_OE, ctrl2_val);
+	regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL2,
+		NAU8540_I2S_DO34_OE, 0);
+
+	return 0;
+}
+
+/**
+ * nau8540_set_tdm_slot - configure DAI TX TDM.
+ * @dai: DAI
+ * @tx_mask: bitmask representing active TX slots. Ex.
+ *                 0xf for normal 4 channel TDM.
+ *                 0xf0 for shifted 4 channel TDM
+ * @rx_mask: no used.
+ * @slots: Number of slots in use.
+ * @slot_width: Width in bits for each slot.
+ *
+ * Configures a DAI for TDM operation. Only support 4 slots TDM.
+ */
+static int nau8540_set_tdm_slot(struct snd_soc_dai *dai,
+	unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
+{
+	struct snd_soc_component *component = dai->component;
+	struct nau8540 *nau8540 = snd_soc_component_get_drvdata(component);
+	unsigned int ctrl2_val = 0, ctrl4_val = 0;
+
+	if (slots > 4 || ((tx_mask & 0xf0) && (tx_mask & 0xf)))
+		return -EINVAL;
+
+	ctrl4_val |= (NAU8540_TDM_MODE | NAU8540_TDM_OFFSET_EN);
+	if (tx_mask & 0xf0) {
+		ctrl2_val = 4 * slot_width;
+		ctrl4_val |= (tx_mask >> 4);
+	} else {
+		ctrl4_val |= tx_mask;
+	}
+	regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL4,
+		NAU8540_TDM_MODE | NAU8540_TDM_OFFSET_EN |
+		NAU8540_TDM_TX_MASK, ctrl4_val);
+	regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL1,
+		NAU8540_I2S_DO12_OE, NAU8540_I2S_DO12_OE);
+	regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL2,
+		NAU8540_I2S_DO34_OE | NAU8540_I2S_TSLOT_L_MASK,
+		NAU8540_I2S_DO34_OE | ctrl2_val);
+
+	return 0;
+}
+
+
+static const struct snd_soc_dai_ops nau8540_dai_ops = {
+	.hw_params = nau8540_hw_params,
+	.set_fmt = nau8540_set_fmt,
+	.set_tdm_slot = nau8540_set_tdm_slot,
+};
+
+#define NAU8540_RATES SNDRV_PCM_RATE_8000_48000
+#define NAU8540_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \
+	 | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_driver nau8540_dai = {
+	.name = "nau8540-hifi",
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 4,
+		.rates = NAU8540_RATES,
+		.formats = NAU8540_FORMATS,
+	},
+	.ops = &nau8540_dai_ops,
+};
+
+/**
+ * nau8540_calc_fll_param - Calculate FLL parameters.
+ * @fll_in: external clock provided to codec.
+ * @fs: sampling rate.
+ * @fll_param: Pointer to structure of FLL parameters.
+ *
+ * Calculate FLL parameters to configure codec.
+ *
+ * Returns 0 for success or negative error code.
+ */
+static int nau8540_calc_fll_param(unsigned int fll_in,
+	unsigned int fs, struct nau8540_fll *fll_param)
+{
+	u64 fvco, fvco_max;
+	unsigned int fref, i, fvco_sel;
+
+	/* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing
+	 * freq_in by 1, 2, 4, or 8 using FLL pre-scalar.
+	 * FREF = freq_in / NAU8540_FLL_REF_DIV_MASK
+	 */
+	for (i = 0; i < ARRAY_SIZE(fll_pre_scalar); i++) {
+		fref = fll_in / fll_pre_scalar[i].param;
+		if (fref <= NAU_FREF_MAX)
+			break;
+	}
+	if (i == ARRAY_SIZE(fll_pre_scalar))
+		return -EINVAL;
+	fll_param->clk_ref_div = fll_pre_scalar[i].val;
+
+	/* Choose the FLL ratio based on FREF */
+	for (i = 0; i < ARRAY_SIZE(fll_ratio); i++) {
+		if (fref >= fll_ratio[i].param)
+			break;
+	}
+	if (i == ARRAY_SIZE(fll_ratio))
+		return -EINVAL;
+	fll_param->ratio = fll_ratio[i].val;
+
+	/* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs.
+	 * FDCO must be within the 90MHz - 124MHz or the FFL cannot be
+	 * guaranteed across the full range of operation.
+	 * FDCO = freq_out * 2 * mclk_src_scaling
+	 */
+	fvco_max = 0;
+	fvco_sel = ARRAY_SIZE(mclk_src_scaling);
+	for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) {
+		fvco = 256ULL * fs * 2 * mclk_src_scaling[i].param;
+		if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX &&
+			fvco_max < fvco) {
+			fvco_max = fvco;
+			fvco_sel = i;
+		}
+	}
+	if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel)
+		return -EINVAL;
+	fll_param->mclk_src = mclk_src_scaling[fvco_sel].val;
+
+	/* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional
+	 * input based on FDCO, FREF and FLL ratio.
+	 */
+	fvco = div_u64(fvco_max << 16, fref * fll_param->ratio);
+	fll_param->fll_int = (fvco >> 16) & 0x3FF;
+	fll_param->fll_frac = fvco & 0xFFFF;
+	return 0;
+}
+
+static void nau8540_fll_apply(struct regmap *regmap,
+	struct nau8540_fll *fll_param)
+{
+	regmap_update_bits(regmap, NAU8540_REG_CLOCK_SRC,
+		NAU8540_CLK_SRC_MASK | NAU8540_CLK_MCLK_SRC_MASK,
+		NAU8540_CLK_SRC_MCLK | fll_param->mclk_src);
+	regmap_update_bits(regmap, NAU8540_REG_FLL1,
+		NAU8540_FLL_RATIO_MASK | NAU8540_ICTRL_LATCH_MASK,
+		fll_param->ratio | (0x6 << NAU8540_ICTRL_LATCH_SFT));
+	/* FLL 16-bit fractional input */
+	regmap_write(regmap, NAU8540_REG_FLL2, fll_param->fll_frac);
+	/* FLL 10-bit integer input */
+	regmap_update_bits(regmap, NAU8540_REG_FLL3,
+		NAU8540_FLL_INTEGER_MASK, fll_param->fll_int);
+	/* FLL pre-scaler */
+	regmap_update_bits(regmap, NAU8540_REG_FLL4,
+		NAU8540_FLL_REF_DIV_MASK,
+		fll_param->clk_ref_div << NAU8540_FLL_REF_DIV_SFT);
+	regmap_update_bits(regmap, NAU8540_REG_FLL5,
+		NAU8540_FLL_CLK_SW_MASK, NAU8540_FLL_CLK_SW_REF);
+	regmap_update_bits(regmap,
+		NAU8540_REG_FLL6, NAU8540_DCO_EN, 0);
+	if (fll_param->fll_frac) {
+		regmap_update_bits(regmap, NAU8540_REG_FLL5,
+			NAU8540_FLL_PDB_DAC_EN | NAU8540_FLL_LOOP_FTR_EN |
+			NAU8540_FLL_FTR_SW_MASK,
+			NAU8540_FLL_PDB_DAC_EN | NAU8540_FLL_LOOP_FTR_EN |
+			NAU8540_FLL_FTR_SW_FILTER);
+		regmap_update_bits(regmap, NAU8540_REG_FLL6,
+			NAU8540_SDM_EN | NAU8540_CUTOFF500,
+			NAU8540_SDM_EN | NAU8540_CUTOFF500);
+	} else {
+		regmap_update_bits(regmap, NAU8540_REG_FLL5,
+			NAU8540_FLL_PDB_DAC_EN | NAU8540_FLL_LOOP_FTR_EN |
+			NAU8540_FLL_FTR_SW_MASK, NAU8540_FLL_FTR_SW_ACCU);
+		regmap_update_bits(regmap, NAU8540_REG_FLL6,
+			NAU8540_SDM_EN | NAU8540_CUTOFF500, 0);
+	}
+}
+
+/* freq_out must be 256*Fs in order to achieve the best performance */
+static int nau8540_set_pll(struct snd_soc_component *component, int pll_id, int source,
+		unsigned int freq_in, unsigned int freq_out)
+{
+	struct nau8540 *nau8540 = snd_soc_component_get_drvdata(component);
+	struct nau8540_fll fll_param;
+	int ret, fs;
+
+	switch (pll_id) {
+	case NAU8540_CLK_FLL_MCLK:
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_FLL3,
+			NAU8540_FLL_CLK_SRC_MASK | NAU8540_GAIN_ERR_MASK,
+			NAU8540_FLL_CLK_SRC_MCLK | 0);
+		break;
+
+	case NAU8540_CLK_FLL_BLK:
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_FLL3,
+			NAU8540_FLL_CLK_SRC_MASK | NAU8540_GAIN_ERR_MASK,
+			NAU8540_FLL_CLK_SRC_BLK |
+			(0xf << NAU8540_GAIN_ERR_SFT));
+		break;
+
+	case NAU8540_CLK_FLL_FS:
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_FLL3,
+			NAU8540_FLL_CLK_SRC_MASK | NAU8540_GAIN_ERR_MASK,
+			NAU8540_FLL_CLK_SRC_FS |
+			(0xf << NAU8540_GAIN_ERR_SFT));
+		break;
+
+	default:
+		dev_err(nau8540->dev, "Invalid clock id (%d)\n", pll_id);
+		return -EINVAL;
+	}
+	dev_dbg(nau8540->dev, "Sysclk is %dHz and clock id is %d\n",
+		freq_out, pll_id);
+
+	fs = freq_out / 256;
+	ret = nau8540_calc_fll_param(freq_in, fs, &fll_param);
+	if (ret < 0) {
+		dev_err(nau8540->dev, "Unsupported input clock %d\n", freq_in);
+		return ret;
+	}
+	dev_dbg(nau8540->dev, "mclk_src=%x ratio=%x fll_frac=%x fll_int=%x clk_ref_div=%x\n",
+		fll_param.mclk_src, fll_param.ratio, fll_param.fll_frac,
+		fll_param.fll_int, fll_param.clk_ref_div);
+
+	nau8540_fll_apply(nau8540->regmap, &fll_param);
+	mdelay(2);
+	regmap_update_bits(nau8540->regmap, NAU8540_REG_CLOCK_SRC,
+		NAU8540_CLK_SRC_MASK, NAU8540_CLK_SRC_VCO);
+
+	return 0;
+}
+
+static int nau8540_set_sysclk(struct snd_soc_component *component,
+	int clk_id, int source, unsigned int freq, int dir)
+{
+	struct nau8540 *nau8540 = snd_soc_component_get_drvdata(component);
+
+	switch (clk_id) {
+	case NAU8540_CLK_DIS:
+	case NAU8540_CLK_MCLK:
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_CLOCK_SRC,
+			NAU8540_CLK_SRC_MASK, NAU8540_CLK_SRC_MCLK);
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_FLL6,
+			NAU8540_DCO_EN, 0);
+		break;
+
+	case NAU8540_CLK_INTERNAL:
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_FLL6,
+			NAU8540_DCO_EN, NAU8540_DCO_EN);
+		regmap_update_bits(nau8540->regmap, NAU8540_REG_CLOCK_SRC,
+			NAU8540_CLK_SRC_MASK, NAU8540_CLK_SRC_VCO);
+		break;
+
+	default:
+		dev_err(nau8540->dev, "Invalid clock id (%d)\n", clk_id);
+		return -EINVAL;
+	}
+
+	dev_dbg(nau8540->dev, "Sysclk is %dHz and clock id is %d\n",
+		freq, clk_id);
+
+	return 0;
+}
+
+static void nau8540_reset_chip(struct regmap *regmap)
+{
+	regmap_write(regmap, NAU8540_REG_SW_RESET, 0x00);
+	regmap_write(regmap, NAU8540_REG_SW_RESET, 0x00);
+}
+
+static void nau8540_init_regs(struct nau8540 *nau8540)
+{
+	struct regmap *regmap = nau8540->regmap;
+
+	/* Enable Bias/VMID/VMID Tieoff */
+	regmap_update_bits(regmap, NAU8540_REG_VMID_CTRL,
+		NAU8540_VMID_EN | NAU8540_VMID_SEL_MASK,
+		NAU8540_VMID_EN | (0x2 << NAU8540_VMID_SEL_SFT));
+	regmap_update_bits(regmap, NAU8540_REG_REFERENCE,
+		NAU8540_PRECHARGE_DIS | NAU8540_GLOBAL_BIAS_EN,
+		NAU8540_PRECHARGE_DIS | NAU8540_GLOBAL_BIAS_EN);
+	mdelay(2);
+	regmap_update_bits(regmap, NAU8540_REG_MIC_BIAS,
+		NAU8540_PU_PRE, NAU8540_PU_PRE);
+	regmap_update_bits(regmap, NAU8540_REG_CLOCK_CTRL,
+		NAU8540_CLK_ADC_EN | NAU8540_CLK_I2S_EN,
+		NAU8540_CLK_ADC_EN | NAU8540_CLK_I2S_EN);
+	/* ADC OSR selection, CLK_ADC = Fs * OSR;
+	 * Channel time alignment enable.
+	 */
+	regmap_update_bits(regmap, NAU8540_REG_ADC_SAMPLE_RATE,
+		NAU8540_CH_SYNC | NAU8540_ADC_OSR_MASK,
+		NAU8540_CH_SYNC | NAU8540_ADC_OSR_64);
+	/* PGA input mode selection */
+	regmap_update_bits(regmap, NAU8540_REG_FEPGA1,
+		NAU8540_FEPGA1_MODCH2_SHT | NAU8540_FEPGA1_MODCH1_SHT,
+		NAU8540_FEPGA1_MODCH2_SHT | NAU8540_FEPGA1_MODCH1_SHT);
+	regmap_update_bits(regmap, NAU8540_REG_FEPGA2,
+		NAU8540_FEPGA2_MODCH4_SHT | NAU8540_FEPGA2_MODCH3_SHT,
+		NAU8540_FEPGA2_MODCH4_SHT | NAU8540_FEPGA2_MODCH3_SHT);
+	/* DO12 and DO34 pad output disable */
+	regmap_update_bits(regmap, NAU8540_REG_PCM_CTRL1,
+		NAU8540_I2S_DO12_TRI, NAU8540_I2S_DO12_TRI);
+	regmap_update_bits(regmap, NAU8540_REG_PCM_CTRL2,
+		NAU8540_I2S_DO34_TRI, NAU8540_I2S_DO34_TRI);
+}
+
+static int __maybe_unused nau8540_suspend(struct snd_soc_component *component)
+{
+	struct nau8540 *nau8540 = snd_soc_component_get_drvdata(component);
+
+	regcache_cache_only(nau8540->regmap, true);
+	regcache_mark_dirty(nau8540->regmap);
+
+	return 0;
+}
+
+static int __maybe_unused nau8540_resume(struct snd_soc_component *component)
+{
+	struct nau8540 *nau8540 = snd_soc_component_get_drvdata(component);
+
+	regcache_cache_only(nau8540->regmap, false);
+	regcache_sync(nau8540->regmap);
+
+	return 0;
+}
+
+static const struct snd_soc_component_driver nau8540_component_driver = {
+	.set_sysclk		= nau8540_set_sysclk,
+	.set_pll		= nau8540_set_pll,
+	.suspend		= nau8540_suspend,
+	.resume			= nau8540_resume,
+	.controls		= nau8540_snd_controls,
+	.num_controls		= ARRAY_SIZE(nau8540_snd_controls),
+	.dapm_widgets		= nau8540_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(nau8540_dapm_widgets),
+	.dapm_routes		= nau8540_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(nau8540_dapm_routes),
+	.suspend_bias_off	= 1,
+	.idle_bias_on		= 1,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static const struct regmap_config nau8540_regmap_config = {
+	.val_bits = 16,
+	.reg_bits = 16,
+
+	.max_register = NAU8540_REG_MAX,
+	.readable_reg = nau8540_readable_reg,
+	.writeable_reg = nau8540_writeable_reg,
+	.volatile_reg = nau8540_volatile_reg,
+
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults = nau8540_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(nau8540_reg_defaults),
+};
+
+static int nau8540_i2c_probe(struct i2c_client *i2c,
+	const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c->dev;
+	struct nau8540 *nau8540 = dev_get_platdata(dev);
+	int ret, value;
+
+	if (!nau8540) {
+		nau8540 = devm_kzalloc(dev, sizeof(*nau8540), GFP_KERNEL);
+		if (!nau8540)
+			return -ENOMEM;
+	}
+	i2c_set_clientdata(i2c, nau8540);
+
+	nau8540->regmap = devm_regmap_init_i2c(i2c, &nau8540_regmap_config);
+	if (IS_ERR(nau8540->regmap))
+		return PTR_ERR(nau8540->regmap);
+	ret = regmap_read(nau8540->regmap, NAU8540_REG_I2C_DEVICE_ID, &value);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read device id from the NAU85L40: %d\n",
+			ret);
+		return ret;
+	}
+
+	nau8540->dev = dev;
+	nau8540_reset_chip(nau8540->regmap);
+	nau8540_init_regs(nau8540);
+
+	return devm_snd_soc_register_component(dev,
+		&nau8540_component_driver, &nau8540_dai, 1);
+}
+
+static const struct i2c_device_id nau8540_i2c_ids[] = {
+	{ "nau8540", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, nau8540_i2c_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id nau8540_of_ids[] = {
+	{ .compatible = "nuvoton,nau8540", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, nau8540_of_ids);
+#endif
+
+static struct i2c_driver nau8540_i2c_driver = {
+	.driver = {
+		.name = "nau8540",
+		.of_match_table = of_match_ptr(nau8540_of_ids),
+	},
+	.probe = nau8540_i2c_probe,
+	.id_table = nau8540_i2c_ids,
+};
+module_i2c_driver(nau8540_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC NAU85L40 driver");
+MODULE_AUTHOR("John Hsu <KCHSU0@nuvoton.com>");
+MODULE_LICENSE("GPL v2");