Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 677 insertions, 0 deletions

diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
new file mode 100644
index 000000000..768888b93
--- /dev/null
+++ b/tools/perf/Documentation/perf-record.txt
@@ -0,0 +1,677 @@
+perf-record(1)
+==============
+
+NAME
+----
+perf-record - Run a command and record its profile into perf.data
+
+SYNOPSIS
+--------
+[verse]
+'perf record' [-e <EVENT> | --event=EVENT] [-a] <command>
+'perf record' [-e <EVENT> | --event=EVENT] [-a] -- <command> [<options>]
+
+DESCRIPTION
+-----------
+This command runs a command and gathers a performance counter profile
+from it, into perf.data - without displaying anything.
+
+This file can then be inspected later on, using 'perf report'.
+
+
+OPTIONS
+-------
+<command>...::
+	Any command you can specify in a shell.
+
+-e::
+--event=::
+	Select the PMU event. Selection can be:
+
+        - a symbolic event name	(use 'perf list' to list all events)
+
+        - a raw PMU event (eventsel+umask) in the form of rNNN where NNN is a
+	  hexadecimal event descriptor.
+
+        - a symbolic or raw PMU event followed by an optional colon
+	  and a list of event modifiers, e.g., cpu-cycles:p.  See the
+	  linkperf:perf-list[1] man page for details on event modifiers.
+
+	- a symbolically formed PMU event like 'pmu/param1=0x3,param2/' where
+	  'param1', 'param2', etc are defined as formats for the PMU in
+	  /sys/bus/event_source/devices/<pmu>/format/*.
+
+	- a symbolically formed event like 'pmu/config=M,config1=N,config3=K/'
+
+          where M, N, K are numbers (in decimal, hex, octal format). Acceptable
+          values for each of 'config', 'config1' and 'config2' are defined by
+          corresponding entries in /sys/bus/event_source/devices/<pmu>/format/*
+          param1 and param2 are defined as formats for the PMU in:
+          /sys/bus/event_source/devices/<pmu>/format/*
+
+	  There are also some parameters which are not defined in .../<pmu>/format/*.
+	  These params can be used to overload default config values per event.
+	  Here are some common parameters:
+	  - 'period': Set event sampling period
+	  - 'freq': Set event sampling frequency
+	  - 'time': Disable/enable time stamping. Acceptable values are 1 for
+		    enabling time stamping. 0 for disabling time stamping.
+		    The default is 1.
+	  - 'call-graph': Disable/enable callgraph. Acceptable str are "fp" for
+			 FP mode, "dwarf" for DWARF mode, "lbr" for LBR mode and
+			 "no" for disable callgraph.
+	  - 'stack-size': user stack size for dwarf mode
+	  - 'name' : User defined event name. Single quotes (') may be used to
+		    escape symbols in the name from parsing by shell and tool
+		    like this: name=\'CPU_CLK_UNHALTED.THREAD:cmask=0x1\'.
+	  - 'aux-output': Generate AUX records instead of events. This requires
+			  that an AUX area event is also provided.
+	  - 'aux-sample-size': Set sample size for AUX area sampling. If the
+	  '--aux-sample' option has been used, set aux-sample-size=0 to disable
+	  AUX area sampling for the event.
+
+          See the linkperf:perf-list[1] man page for more parameters.
+
+	  Note: If user explicitly sets options which conflict with the params,
+	  the value set by the parameters will be overridden.
+
+	  Also not defined in .../<pmu>/format/* are PMU driver specific
+	  configuration parameters.  Any configuration parameter preceded by
+	  the letter '@' is not interpreted in user space and sent down directly
+	  to the PMU driver.  For example:
+
+	  perf record -e some_event/@cfg1,@cfg2=config/ ...
+
+	  will see 'cfg1' and 'cfg2=config' pushed to the PMU driver associated
+	  with the event for further processing.  There is no restriction on
+	  what the configuration parameters are, as long as their semantic is
+	  understood and supported by the PMU driver.
+
+        - a hardware breakpoint event in the form of '\mem:addr[/len][:access]'
+          where addr is the address in memory you want to break in.
+          Access is the memory access type (read, write, execute) it can
+          be passed as follows: '\mem:addr[:[r][w][x]]'. len is the range,
+          number of bytes from specified addr, which the breakpoint will cover.
+          If you want to profile read-write accesses in 0x1000, just set
+          'mem:0x1000:rw'.
+          If you want to profile write accesses in [0x1000~1008), just set
+          'mem:0x1000/8:w'.
+
+        - a BPF source file (ending in .c) or a precompiled object file (ending
+          in .o) selects one or more BPF events.
+          The BPF program can attach to various perf events based on the ELF section
+          names.
+
+          When processing a '.c' file, perf searches an installed LLVM to compile it
+          into an object file first. Optional clang options can be passed via the
+          '--clang-opt' command line option, e.g.:
+
+            perf record --clang-opt "-DLINUX_VERSION_CODE=0x50000" \
+                        -e tests/bpf-script-example.c
+
+          Note: '--clang-opt' must be placed before '--event/-e'.
+
+	- a group of events surrounded by a pair of brace ("{event1,event2,...}").
+	  Each event is separated by commas and the group should be quoted to
+	  prevent the shell interpretation.  You also need to use --group on
+	  "perf report" to view group events together.
+
+--filter=<filter>::
+        Event filter. This option should follow an event selector (-e) which
+	selects either tracepoint event(s) or a hardware trace PMU
+	(e.g. Intel PT or CoreSight).
+
+	- tracepoint filters
+
+	In the case of tracepoints, multiple '--filter' options are combined
+	using '&&'.
+
+	- address filters
+
+	A hardware trace PMU advertises its ability to accept a number of
+	address filters	by specifying a non-zero value in
+	/sys/bus/event_source/devices/<pmu>/nr_addr_filters.
+
+	Address filters have the format:
+
+	filter|start|stop|tracestop <start> [/ <size>] [@<file name>]
+
+	Where:
+	- 'filter': defines a region that will be traced.
+	- 'start': defines an address at which tracing will begin.
+	- 'stop': defines an address at which tracing will stop.
+	- 'tracestop': defines a region in which tracing will stop.
+
+	<file name> is the name of the object file, <start> is the offset to the
+	code to trace in that file, and <size> is the size of the region to
+	trace. 'start' and 'stop' filters need not specify a <size>.
+
+	If no object file is specified then the kernel is assumed, in which case
+	the start address must be a current kernel memory address.
+
+	<start> can also be specified by providing the name of a symbol. If the
+	symbol name is not unique, it can be disambiguated by inserting #n where
+	'n' selects the n'th symbol in address order. Alternately #0, #g or #G
+	select only a global symbol. <size> can also be specified by providing
+	the name of a symbol, in which case the size is calculated to the end
+	of that symbol. For 'filter' and 'tracestop' filters, if <size> is
+	omitted and <start> is a symbol, then the size is calculated to the end
+	of that symbol.
+
+	If <size> is omitted and <start> is '*', then the start and size will
+	be calculated from the first and last symbols, i.e. to trace the whole
+	file.
+
+	If symbol names (or '*') are provided, they must be surrounded by white
+	space.
+
+	The filter passed to the kernel is not necessarily the same as entered.
+	To see the filter that is passed, use the -v option.
+
+	The kernel may not be able to configure a trace region if it is not
+	within a single mapping.  MMAP events (or /proc/<pid>/maps) can be
+	examined to determine if that is a possibility.
+
+	Multiple filters can be separated with space or comma.
+
+--exclude-perf::
+	Don't record events issued by perf itself. This option should follow
+	an event selector (-e) which selects tracepoint event(s). It adds a
+	filter expression 'common_pid != $PERFPID' to filters. If other
+	'--filter' exists, the new filter expression will be combined with
+	them by '&&'.
+
+-a::
+--all-cpus::
+        System-wide collection from all CPUs (default if no target is specified).
+
+-p::
+--pid=::
+	Record events on existing process ID (comma separated list).
+
+-t::
+--tid=::
+        Record events on existing thread ID (comma separated list).
+        This option also disables inheritance by default.  Enable it by adding
+        --inherit.
+
+-u::
+--uid=::
+        Record events in threads owned by uid. Name or number.
+
+-r::
+--realtime=::
+	Collect data with this RT SCHED_FIFO priority.
+
+--no-buffering::
+	Collect data without buffering.
+
+-c::
+--count=::
+	Event period to sample.
+
+-o::
+--output=::
+	Output file name.
+
+-i::
+--no-inherit::
+	Child tasks do not inherit counters.
+
+-F::
+--freq=::
+	Profile at this frequency. Use 'max' to use the currently maximum
+	allowed frequency, i.e. the value in the kernel.perf_event_max_sample_rate
+	sysctl. Will throttle down to the currently maximum allowed frequency.
+	See --strict-freq.
+
+--strict-freq::
+	Fail if the specified frequency can't be used.
+
+-m::
+--mmap-pages=::
+	Number of mmap data pages (must be a power of two) or size
+	specification with appended unit character - B/K/M/G. The
+	size is rounded up to have nearest pages power of two value.
+	Also, by adding a comma, the number of mmap pages for AUX
+	area tracing can be specified.
+
+--group::
+	Put all events in a single event group.  This precedes the --event
+	option and remains only for backward compatibility.  See --event.
+
+-g::
+	Enables call-graph (stack chain/backtrace) recording for both
+	kernel space and user space.
+
+--call-graph::
+	Setup and enable call-graph (stack chain/backtrace) recording,
+	implies -g.  Default is "fp" (for user space).
+
+	The unwinding method used for kernel space is dependent on the
+	unwinder used by the active kernel configuration, i.e
+	CONFIG_UNWINDER_FRAME_POINTER (fp) or CONFIG_UNWINDER_ORC (orc)
+
+	Any option specified here controls the method used for user space.
+
+	Valid options are "fp" (frame pointer), "dwarf" (DWARF's CFI -
+	Call Frame Information) or "lbr" (Hardware Last Branch Record
+	facility).
+
+	In some systems, where binaries are build with gcc
+	--fomit-frame-pointer, using the "fp" method will produce bogus
+	call graphs, using "dwarf", if available (perf tools linked to
+	the libunwind or libdw library) should be used instead.
+	Using the "lbr" method doesn't require any compiler options. It
+	will produce call graphs from the hardware LBR registers. The
+	main limitation is that it is only available on new Intel
+	platforms, such as Haswell. It can only get user call chain. It
+	doesn't work with branch stack sampling at the same time.
+
+	When "dwarf" recording is used, perf also records (user) stack dump
+	when sampled.  Default size of the stack dump is 8192 (bytes).
+	User can change the size by passing the size after comma like
+	"--call-graph dwarf,4096".
+
+-q::
+--quiet::
+	Don't print any message, useful for scripting.
+
+-v::
+--verbose::
+	Be more verbose (show counter open errors, etc).
+
+-s::
+--stat::
+	Record per-thread event counts.  Use it with 'perf report -T' to see
+	the values.
+
+-d::
+--data::
+	Record the sample virtual addresses.
+
+--phys-data::
+	Record the sample physical addresses.
+
+-T::
+--timestamp::
+	Record the sample timestamps. Use it with 'perf report -D' to see the
+	timestamps, for instance.
+
+-P::
+--period::
+	Record the sample period.
+
+--sample-cpu::
+	Record the sample cpu.
+
+-n::
+--no-samples::
+	Don't sample.
+
+-R::
+--raw-samples::
+Collect raw sample records from all opened counters (default for tracepoint counters).
+
+-C::
+--cpu::
+Collect samples only on the list of CPUs provided. Multiple CPUs can be provided as a
+comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+In per-thread mode with inheritance mode on (default), samples are captured only when
+the thread executes on the designated CPUs. Default is to monitor all CPUs.
+
+-B::
+--no-buildid::
+Do not save the build ids of binaries in the perf.data files. This skips
+post processing after recording, which sometimes makes the final step in
+the recording process to take a long time, as it needs to process all
+events looking for mmap records. The downside is that it can misresolve
+symbols if the workload binaries used when recording get locally rebuilt
+or upgraded, because the only key available in this case is the
+pathname. You can also set the "record.build-id" config variable to
+'skip to have this behaviour permanently.
+
+-N::
+--no-buildid-cache::
+Do not update the buildid cache. This saves some overhead in situations
+where the information in the perf.data file (which includes buildids)
+is sufficient.  You can also set the "record.build-id" config variable to
+'no-cache' to have the same effect.
+
+-G name,...::
+--cgroup name,...::
+monitor only in the container (cgroup) called "name". This option is available only
+in per-cpu mode. The cgroup filesystem must be mounted. All threads belonging to
+container "name" are monitored when they run on the monitored CPUs. Multiple cgroups
+can be provided. Each cgroup is applied to the corresponding event, i.e., first cgroup
+to first event, second cgroup to second event and so on. It is possible to provide
+an empty cgroup (monitor all the time) using, e.g., -G foo,,bar. Cgroups must have
+corresponding events, i.e., they always refer to events defined earlier on the command
+line. If the user wants to track multiple events for a specific cgroup, the user can
+use '-e e1 -e e2 -G foo,foo' or just use '-e e1 -e e2 -G foo'.
+
+If wanting to monitor, say, 'cycles' for a cgroup and also for system wide, this
+command line can be used: 'perf stat -e cycles -G cgroup_name -a -e cycles'.
+
+-b::
+--branch-any::
+Enable taken branch stack sampling. Any type of taken branch may be sampled.
+This is a shortcut for --branch-filter any. See --branch-filter for more infos.
+
+-j::
+--branch-filter::
+Enable taken branch stack sampling. Each sample captures a series of consecutive
+taken branches. The number of branches captured with each sample depends on the
+underlying hardware, the type of branches of interest, and the executed code.
+It is possible to select the types of branches captured by enabling filters. The
+following filters are defined:
+
+        - any:  any type of branches
+        - any_call: any function call or system call
+        - any_ret: any function return or system call return
+        - ind_call: any indirect branch
+        - call: direct calls, including far (to/from kernel) calls
+        - u:  only when the branch target is at the user level
+        - k: only when the branch target is in the kernel
+        - hv: only when the target is at the hypervisor level
+	- in_tx: only when the target is in a hardware transaction
+	- no_tx: only when the target is not in a hardware transaction
+	- abort_tx: only when the target is a hardware transaction abort
+	- cond: conditional branches
+	- save_type: save branch type during sampling in case binary is not available later
+
++
+The option requires at least one branch type among any, any_call, any_ret, ind_call, cond.
+The privilege levels may be omitted, in which case, the privilege levels of the associated
+event are applied to the branch filter. Both kernel (k) and hypervisor (hv) privilege
+levels are subject to permissions.  When sampling on multiple events, branch stack sampling
+is enabled for all the sampling events. The sampled branch type is the same for all events.
+The various filters must be specified as a comma separated list: --branch-filter any_ret,u,k
+Note that this feature may not be available on all processors.
+
+--weight::
+Enable weightened sampling. An additional weight is recorded per sample and can be
+displayed with the weight and local_weight sort keys.  This currently works for TSX
+abort events and some memory events in precise mode on modern Intel CPUs.
+
+--namespaces::
+Record events of type PERF_RECORD_NAMESPACES.  This enables 'cgroup_id' sort key.
+
+--all-cgroups::
+Record events of type PERF_RECORD_CGROUP.  This enables 'cgroup' sort key.
+
+--transaction::
+Record transaction flags for transaction related events.
+
+--per-thread::
+Use per-thread mmaps.  By default per-cpu mmaps are created.  This option
+overrides that and uses per-thread mmaps.  A side-effect of that is that
+inheritance is automatically disabled.  --per-thread is ignored with a warning
+if combined with -a or -C options.
+
+-D::
+--delay=::
+After starting the program, wait msecs before measuring (-1: start with events
+disabled). This is useful to filter out the startup phase of the program, which
+is often very different.
+
+-I::
+--intr-regs::
+Capture machine state (registers) at interrupt, i.e., on counter overflows for
+each sample. List of captured registers depends on the architecture. This option
+is off by default. It is possible to select the registers to sample using their
+symbolic names, e.g. on x86, ax, si. To list the available registers use
+--intr-regs=\?. To name registers, pass a comma separated list such as
+--intr-regs=ax,bx. The list of register is architecture dependent.
+
+--user-regs::
+Similar to -I, but capture user registers at sample time. To list the available
+user registers use --user-regs=\?.
+
+--running-time::
+Record running and enabled time for read events (:S)
+
+-k::
+--clockid::
+Sets the clock id to use for the various time fields in the perf_event_type
+records. See clock_gettime(). In particular CLOCK_MONOTONIC and
+CLOCK_MONOTONIC_RAW are supported, some events might also allow
+CLOCK_BOOTTIME, CLOCK_REALTIME and CLOCK_TAI.
+
+-S::
+--snapshot::
+Select AUX area tracing Snapshot Mode. This option is valid only with an
+AUX area tracing event. Optionally, certain snapshot capturing parameters
+can be specified in a string that follows this option:
+  'e': take one last snapshot on exit; guarantees that there is at least one
+       snapshot in the output file;
+  <size>: if the PMU supports this, specify the desired snapshot size.
+
+In Snapshot Mode trace data is captured only when signal SIGUSR2 is received
+and on exit if the above 'e' option is given.
+
+--aux-sample[=OPTIONS]::
+Select AUX area sampling. At least one of the events selected by the -e option
+must be an AUX area event. Samples on other events will be created containing
+data from the AUX area. Optionally sample size may be specified, otherwise it
+defaults to 4KiB.
+
+--proc-map-timeout::
+When processing pre-existing threads /proc/XXX/mmap, it may take a long time,
+because the file may be huge. A time out is needed in such cases.
+This option sets the time out limit. The default value is 500 ms.
+
+--switch-events::
+Record context switch events i.e. events of type PERF_RECORD_SWITCH or
+PERF_RECORD_SWITCH_CPU_WIDE. In some cases (e.g. Intel PT or CoreSight)
+switch events will be enabled automatically, which can be suppressed by
+by the option --no-switch-events.
+
+--clang-path=PATH::
+Path to clang binary to use for compiling BPF scriptlets.
+(enabled when BPF support is on)
+
+--clang-opt=OPTIONS::
+Options passed to clang when compiling BPF scriptlets.
+(enabled when BPF support is on)
+
+--vmlinux=PATH::
+Specify vmlinux path which has debuginfo.
+(enabled when BPF prologue is on)
+
+--buildid-all::
+Record build-id of all DSOs regardless whether it's actually hit or not.
+
+--aio[=n]::
+Use <n> control blocks in asynchronous (Posix AIO) trace writing mode (default: 1, max: 4).
+Asynchronous mode is supported only when linking Perf tool with libc library
+providing implementation for Posix AIO API.
+
+--affinity=mode::
+Set affinity mask of trace reading thread according to the policy defined by 'mode' value:
+  node - thread affinity mask is set to NUMA node cpu mask of the processed mmap buffer
+  cpu  - thread affinity mask is set to cpu of the processed mmap buffer
+
+--mmap-flush=number::
+
+Specify minimal number of bytes that is extracted from mmap data pages and
+processed for output. One can specify the number using B/K/M/G suffixes.
+
+The maximal allowed value is a quarter of the size of mmaped data pages.
+
+The default option value is 1 byte which means that every time that the output
+writing thread finds some new data in the mmaped buffer the data is extracted,
+possibly compressed (-z) and written to the output, perf.data or pipe.
+
+Larger data chunks are compressed more effectively in comparison to smaller
+chunks so extraction of larger chunks from the mmap data pages is preferable
+from the perspective of output size reduction.
+
+Also at some cases executing less output write syscalls with bigger data size
+can take less time than executing more output write syscalls with smaller data
+size thus lowering runtime profiling overhead.
+
+-z::
+--compression-level[=n]::
+Produce compressed trace using specified level n (default: 1 - fastest compression,
+22 - smallest trace)
+
+--all-kernel::
+Configure all used events to run in kernel space.
+
+--all-user::
+Configure all used events to run in user space.
+
+--kernel-callchains::
+Collect callchains only from kernel space. I.e. this option sets
+perf_event_attr.exclude_callchain_user to 1.
+
+--user-callchains::
+Collect callchains only from user space. I.e. this option sets
+perf_event_attr.exclude_callchain_kernel to 1.
+
+Don't use both --kernel-callchains and --user-callchains at the same time or no
+callchains will be collected.
+
+--timestamp-filename
+Append timestamp to output file name.
+
+--timestamp-boundary::
+Record timestamp boundary (time of first/last samples).
+
+--switch-output[=mode]::
+Generate multiple perf.data files, timestamp prefixed, switching to a new one
+based on 'mode' value:
+  "signal" - when receiving a SIGUSR2 (default value) or
+  <size>   - when reaching the size threshold, size is expected to
+             be a number with appended unit character - B/K/M/G
+  <time>   - when reaching the time threshold, size is expected to
+             be a number with appended unit character - s/m/h/d
+
+             Note: the precision of  the size  threshold  hugely depends
+             on your configuration  - the number and size of  your  ring
+             buffers (-m). It is generally more precise for higher sizes
+             (like >5M), for lower values expect different sizes.
+
+A possible use case is to, given an external event, slice the perf.data file
+that gets then processed, possibly via a perf script, to decide if that
+particular perf.data snapshot should be kept or not.
+
+Implies --timestamp-filename, --no-buildid and --no-buildid-cache.
+The reason for the latter two is to reduce the data file switching
+overhead. You can still switch them on with:
+
+  --switch-output --no-no-buildid  --no-no-buildid-cache
+
+--switch-output-event::
+Events that will cause the switch of the perf.data file, auto-selecting
+--switch-output=signal, the results are similar as internally the side band
+thread will also send a SIGUSR2 to the main one.
+
+Uses the same syntax as --event, it will just not be recorded, serving only to
+switch the perf.data file as soon as the --switch-output event is processed by
+a separate sideband thread.
+
+This sideband thread is also used to other purposes, like processing the
+PERF_RECORD_BPF_EVENT records as they happen, asking the kernel for extra BPF
+information, etc.
+
+--switch-max-files=N::
+
+When rotating perf.data with --switch-output, only keep N files.
+
+--dry-run::
+Parse options then exit. --dry-run can be used to detect errors in cmdline
+options.
+
+'perf record --dry-run -e' can act as a BPF script compiler if llvm.dump-obj
+in config file is set to true.
+
+--tail-synthesize::
+Instead of collecting non-sample events (for example, fork, comm, mmap) at
+the beginning of record, collect them during finalizing an output file.
+The collected non-sample events reflects the status of the system when
+record is finished.
+
+--overwrite::
+Makes all events use an overwritable ring buffer. An overwritable ring
+buffer works like a flight recorder: when it gets full, the kernel will
+overwrite the oldest records, that thus will never make it to the
+perf.data file.
+
+When '--overwrite' and '--switch-output' are used perf records and drops
+events until it receives a signal, meaning that something unusual was
+detected that warrants taking a snapshot of the most current events,
+those fitting in the ring buffer at that moment.
+
+'overwrite' attribute can also be set or canceled for an event using
+config terms. For example: 'cycles/overwrite/' and 'instructions/no-overwrite/'.
+
+Implies --tail-synthesize.
+
+--kcore::
+Make a copy of /proc/kcore and place it into a directory with the perf data file.
+
+--max-size=<size>::
+Limit the sample data max size, <size> is expected to be a number with
+appended unit character - B/K/M/G
+
+--num-thread-synthesize::
+	The number of threads to run when synthesizing events for existing processes.
+	By default, the number of threads equals 1.
+
+ifdef::HAVE_LIBPFM[]
+--pfm-events events::
+Select a PMU event using libpfm4 syntax (see http://perfmon2.sf.net)
+including support for event filters. For example '--pfm-events
+inst_retired:any_p:u:c=1:i'. More than one event can be passed to the
+option using the comma separator. Hardware events and generic hardware
+events cannot be mixed together. The latter must be used with the -e
+option. The -e option and this one can be mixed and matched.  Events
+can be grouped using the {} notation.
+endif::HAVE_LIBPFM[]
+
+--control=fifo:ctl-fifo[,ack-fifo]::
+--control=fd:ctl-fd[,ack-fd]::
+ctl-fifo / ack-fifo are opened and used as ctl-fd / ack-fd as follows.
+Listen on ctl-fd descriptor for command to control measurement ('enable': enable events,
+'disable': disable events, 'snapshot': AUX area tracing snapshot). Measurements can be
+started with events disabled using --delay=-1 option. Optionally send control command
+completion ('ack\n') to ack-fd descriptor to synchronize with the controlling process.
+Example of bash shell script to enable and disable events during measurements:
+
+ #!/bin/bash
+
+ ctl_dir=/tmp/
+
+ ctl_fifo=${ctl_dir}perf_ctl.fifo
+ test -p ${ctl_fifo} && unlink ${ctl_fifo}
+ mkfifo ${ctl_fifo}
+ exec {ctl_fd}<>${ctl_fifo}
+
+ ctl_ack_fifo=${ctl_dir}perf_ctl_ack.fifo
+ test -p ${ctl_ack_fifo} && unlink ${ctl_ack_fifo}
+ mkfifo ${ctl_ack_fifo}
+ exec {ctl_fd_ack}<>${ctl_ack_fifo}
+
+ perf record -D -1 -e cpu-cycles -a               \
+             --control fd:${ctl_fd},${ctl_fd_ack} \
+             -- sleep 30 &
+ perf_pid=$!
+
+ sleep 5  && echo 'enable' >&${ctl_fd} && read -u ${ctl_fd_ack} e1 && echo "enabled(${e1})"
+ sleep 10 && echo 'disable' >&${ctl_fd} && read -u ${ctl_fd_ack} d1 && echo "disabled(${d1})"
+
+ exec {ctl_fd_ack}>&-
+ unlink ${ctl_ack_fifo}
+
+ exec {ctl_fd}>&-
+ unlink ${ctl_fifo}
+
+ wait -n ${perf_pid}
+ exit $?
+
+
+SEE ALSO
+--------
+linkperf:perf-stat[1], linkperf:perf-list[1], linkperf:perf-intel-pt[1]