Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 1254 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh
new file mode 100644
index 000000000..f7c168dec
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../mirror_gre_scale.sh
+
+mirror_gre_get_target()
+{
+	local should_fail=$1; shift
+	local target
+
+	target=$(devlink_resource_size_get span_agents)
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
new file mode 100755
index 000000000..d7cf33a3f
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../../net/forwarding
+
+NUM_NETIFS=6
+source $lib_dir/lib.sh
+source $lib_dir/tc_common.sh
+source $lib_dir/devlink_lib.sh
+
+if [[ "$DEVLINK_VIDDID" != "15b3:cf6c" && \
+	"$DEVLINK_VIDDID" != "15b3:cf70" ]]; then
+	echo "SKIP: test is tailored for Mellanox Spectrum-2 and Spectrum-3"
+	exit 1
+fi
+
+current_test=""
+
+cleanup()
+{
+	pre_cleanup
+	if [ ! -z $current_test ]; then
+		${current_test}_cleanup
+	fi
+	# Need to reload in order to avoid router abort.
+	devlink_reload
+}
+
+trap cleanup EXIT
+
+ALL_TESTS="router tc_flower mirror_gre tc_police"
+for current_test in ${TESTS:-$ALL_TESTS}; do
+	source ${current_test}_scale.sh
+
+	num_netifs_var=${current_test^^}_NUM_NETIFS
+	num_netifs=${!num_netifs_var:-$NUM_NETIFS}
+
+	for should_fail in 0 1; do
+		RET=0
+		target=$(${current_test}_get_target "$should_fail")
+		${current_test}_setup_prepare
+		setup_wait $num_netifs
+		${current_test}_test "$target" "$should_fail"
+		${current_test}_cleanup
+		devlink_reload
+		if [[ "$should_fail" -eq 0 ]]; then
+			log_test "'$current_test' $target"
+		else
+			log_test "'$current_test' overflow $target"
+		fi
+	done
+done
+current_test=""
+
+exit "$RET"
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh
new file mode 100644
index 000000000..1897e163e
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../router_scale.sh
+
+router_get_target()
+{
+	local should_fail=$1
+	local target
+
+	target=$(devlink_resource_size_get kvd)
+
+	if [[ $should_fail -eq 0 ]]; then
+		target=$((target * 85 / 100))
+	else
+		target=$((target + 1))
+	fi
+
+	echo $target
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh
new file mode 100755
index 000000000..616d35814
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh
@@ -0,0 +1,1129 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking the A-TCAM and C-TCAM operation in Spectrum-2.
+# It tries to exercise as many code paths in the eRP state machine as
+# possible.
+
+lib_dir=$(dirname $0)/../../../../net/forwarding
+
+ALL_TESTS="single_mask_test identical_filters_test two_masks_test \
+	multiple_masks_test ctcam_edge_cases_test delta_simple_test \
+	delta_two_masks_one_key_test delta_simple_rehash_test \
+	bloom_simple_test bloom_complex_test bloom_delta_test \
+	max_erp_entries_test max_group_size_test"
+NUM_NETIFS=2
+source $lib_dir/lib.sh
+source $lib_dir/tc_common.sh
+source $lib_dir/devlink_lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 198.51.100.2/24
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24
+}
+
+tp_record()
+{
+	local tracepoint=$1
+	local cmd=$2
+
+	perf record -q -e $tracepoint $cmd
+	return $?
+}
+
+tp_record_all()
+{
+	local tracepoint=$1
+	local seconds=$2
+
+	perf record -a -q -e $tracepoint sleep $seconds
+	return $?
+}
+
+__tp_hit_count()
+{
+	local tracepoint=$1
+
+	local perf_output=`perf script -F trace:event,trace`
+	return `echo $perf_output | grep "$tracepoint:" | wc -l`
+}
+
+tp_check_hits()
+{
+	local tracepoint=$1
+	local count=$2
+
+	__tp_hit_count $tracepoint
+	if [[ "$?" -ne "$count" ]]; then
+		return 1
+	fi
+	return 0
+}
+
+tp_check_hits_any()
+{
+	local tracepoint=$1
+
+	__tp_hit_count $tracepoint
+	if [[ "$?" -eq "0" ]]; then
+		return 1
+	fi
+	return 0
+}
+
+single_mask_test()
+{
+	# When only a single mask is required, the device uses the master
+	# mask and not the eRP table. Verify that under this mode the right
+	# filter is matched
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Single filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 198.51.100.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 2
+	check_err $? "Two filters - did not match highest priority"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Two filters - did not match lowest priority"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Single filter - did not match after delete"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "single mask test ($tcflags)"
+}
+
+identical_filters_test()
+{
+	# When two filters that only differ in their priority are used,
+	# one needs to be inserted into the C-TCAM. This test verifies
+	# that filters are correctly spilled to C-TCAM and that the right
+	# filter is matched
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match C-TCAM filter after A-TCAM delete"
+
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match C-TCAM filter after A-TCAM add"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match A-TCAM filter after C-TCAM delete"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "identical filters test ($tcflags)"
+}
+
+two_masks_test()
+{
+	# When more than one mask is required, the eRP table is used. This
+	# test verifies that the eRP table is correctly allocated and used
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.0.0/8 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Two filters - did not match highest priority"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Single filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Two filters - did not match highest priority after add"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "two masks test ($tcflags)"
+}
+
+multiple_masks_test()
+{
+	# The number of masks in a region is limited. Once the maximum
+	# number of masks has been reached filters that require new
+	# masks are spilled to the C-TCAM. This test verifies that
+	# spillage is performed correctly and that the right filter is
+	# matched
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	local index
+
+	RET=0
+
+	NUM_MASKS=32
+	NUM_ERPS=16
+	BASE_INDEX=100
+
+	for i in $(eval echo {1..$NUM_MASKS}); do
+		index=$((BASE_INDEX - i))
+
+		if ((i > NUM_ERPS)); then
+			exp_hits=1
+			err_msg="$i filters - C-TCAM spill did not happen when it was expected"
+		else
+			exp_hits=0
+			err_msg="$i filters - C-TCAM spill happened when it should not"
+		fi
+
+		tp_record "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \
+			"tc filter add dev $h2 ingress protocol ip pref $index \
+				handle $index \
+				flower $tcflags \
+				dst_ip 192.0.2.2/${i} src_ip 192.0.2.1/${i} \
+				action drop"
+		tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \
+				$exp_hits
+		check_err $? "$err_msg"
+
+		$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \
+			-B 192.0.2.2 -t ip -q
+
+		tc_check_packets "dev $h2 ingress" $index 1
+		check_err $? "$i filters - did not match highest priority (add)"
+	done
+
+	for i in $(eval echo {$NUM_MASKS..1}); do
+		index=$((BASE_INDEX - i))
+
+		$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \
+			-B 192.0.2.2 -t ip -q
+
+		tc_check_packets "dev $h2 ingress" $index 2
+		check_err $? "$i filters - did not match highest priority (del)"
+
+		tc filter del dev $h2 ingress protocol ip pref $index \
+			handle $index flower
+	done
+
+	log_test "multiple masks test ($tcflags)"
+}
+
+ctcam_two_atcam_masks_test()
+{
+	RET=0
+
+	# First case: C-TCAM is disabled when there are two A-TCAM masks.
+	# We push a filter into the C-TCAM by using two identical filters
+	# as in identical_filters_test()
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.0.0/16 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match A-TCAM filter"
+
+	# Delete both A-TCAM and C-TCAM filters and make sure the remaining
+	# A-TCAM filter still works
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "ctcam with two atcam masks test ($tcflags)"
+}
+
+ctcam_one_atcam_mask_test()
+{
+	RET=0
+
+	# Second case: C-TCAM is disabled when there is one A-TCAM mask.
+	# The test is similar to identical_filters_test()
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match C-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "ctcam with one atcam mask test ($tcflags)"
+}
+
+ctcam_no_atcam_masks_test()
+{
+	RET=0
+
+	# Third case: C-TCAM is disabled when there are no A-TCAM masks
+	# This test exercises the code path that transitions the eRP table
+	# to its initial state after deleting the last C-TCAM mask
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "ctcam with no atcam masks test ($tcflags)"
+}
+
+ctcam_edge_cases_test()
+{
+	# When the C-TCAM is disabled after deleting the last C-TCAM
+	# mask, we want to make sure the eRP state machine is put in
+	# the correct state
+
+	ctcam_two_atcam_masks_test
+	ctcam_one_atcam_mask_test
+	ctcam_no_atcam_masks_test
+}
+
+delta_simple_test()
+{
+	# The first filter will create eRP, the second filter will fit into
+	# the first eRP with delta. Remove the first rule then and check that
+        # the eRP stays (referenced by the second filter).
+
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \
+		   pref 1 handle 101 flower $tcflags dst_ip 192.0.0.0/24 \
+		   action drop"
+	tp_check_hits "objagg:objagg_obj_root_create" 1
+	check_err $? "eRP was not created"
+
+	tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \
+		   pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \
+		   action drop"
+	tp_check_hits "objagg:objagg_obj_root_create" 0
+	check_err $? "eRP was incorrectly created"
+	tp_check_hits "objagg:objagg_obj_parent_assign" 1
+	check_err $? "delta was not created"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \
+		   pref 1 handle 101 flower"
+	tp_check_hits "objagg:objagg_obj_root_destroy" 0
+	check_err $? "eRP was incorrectly destroyed"
+	tp_check_hits "objagg:objagg_obj_parent_unassign" 0
+	check_err $? "delta was incorrectly destroyed"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match on correct filter after the first was removed"
+
+	tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \
+		   pref 2 handle 102 flower"
+	tp_check_hits "objagg:objagg_obj_parent_unassign" 1
+	check_err $? "delta was not destroyed"
+	tp_check_hits "objagg:objagg_obj_root_destroy" 1
+	check_err $? "eRP was not destroyed"
+
+	log_test "delta simple test ($tcflags)"
+}
+
+delta_two_masks_one_key_test()
+{
+	# If 2 keys are the same and only differ in mask in a way that
+	# they belong under the same ERP (second is delta of the first),
+	# there should be no C-TCAM spill.
+
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \
+		   pref 1 handle 101 flower $tcflags dst_ip 192.0.2.0/24 \
+		   action drop"
+	tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0
+	check_err $? "incorrect C-TCAM spill while inserting the first rule"
+
+	tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \
+		   pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \
+		   action drop"
+	tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0
+	check_err $? "incorrect C-TCAM spill while inserting the second rule"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "delta two masks one key test ($tcflags)"
+}
+
+delta_simple_rehash_test()
+{
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 0
+	check_err $? "Failed to set ACL region rehash interval"
+
+	tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_fail $? "Rehash trace was hit even when rehash should be disabled"
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 3000
+	check_err $? "Failed to set ACL region rehash interval"
+
+	sleep 1
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.1.0/25 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.3.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tp_record_all mlxsw:* 3
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_err $? "Rehash trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate
+	check_err $? "Migrate trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end
+	check_err $? "Migrate end trace was not hit"
+	tp_record_all mlxsw:* 3
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_err $? "Rehash trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate
+	check_fail $? "Migrate trace was hit when no migration should happen"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end
+	check_fail $? "Migrate end trace was hit when no migration should happen"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match on correct filter after rehash"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "delta simple rehash test ($tcflags)"
+}
+
+delta_simple_ipv6_rehash_test()
+{
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 0
+	check_err $? "Failed to set ACL region rehash interval"
+
+	tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_fail $? "Rehash trace was hit even when rehash should be disabled"
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 3000
+	check_err $? "Failed to set ACL region rehash interval"
+
+	sleep 1
+
+	tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \
+		$tcflags dst_ip 2001:db8:1::0/121 action drop
+	tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \
+		$tcflags dst_ip 2001:db8:2::2 action drop
+	tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \
+		$tcflags dst_ip 2001:db8:3::0/120 action drop
+
+	$MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \
+		-A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tp_record_all mlxsw:* 3
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_err $? "Rehash trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate
+	check_err $? "Migrate trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end
+	check_err $? "Migrate end trace was not hit"
+	tp_record_all mlxsw:* 3
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_err $? "Rehash trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate
+	check_fail $? "Migrate trace was hit when no migration should happen"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end
+	check_fail $? "Migrate end trace was hit when no migration should happen"
+
+	$MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \
+		-A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match on correct filter after rehash"
+
+	tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower
+
+	log_test "delta simple IPv6 rehash test ($tcflags)"
+}
+
+TEST_RULE_BASE=256
+declare -a test_rules_inserted
+
+test_rule_add()
+{
+	local iface=$1
+	local tcflags=$2
+	local index=$3
+
+	if ! [ ${test_rules_inserted[$index]} ] ; then
+		test_rules_inserted[$index]=false
+	fi
+	if ${test_rules_inserted[$index]} ; then
+		return
+	fi
+
+	local number=$(( $index + $TEST_RULE_BASE ))
+	printf -v hexnumber '%x' $number
+
+	batch="${batch}filter add dev $iface ingress protocol ipv6 pref 1 \
+		handle $number flower $tcflags \
+		src_ip 2001:db8:1::$hexnumber action drop\n"
+	test_rules_inserted[$index]=true
+}
+
+test_rule_del()
+{
+	local iface=$1
+	local index=$2
+
+	if ! [ ${test_rules_inserted[$index]} ] ; then
+		test_rules_inserted[$index]=false
+	fi
+	if ! ${test_rules_inserted[$index]} ; then
+		return
+	fi
+
+	local number=$(( $index + $TEST_RULE_BASE ))
+	printf -v hexnumber '%x' $number
+
+	batch="${batch}filter del dev $iface ingress protocol ipv6 pref 1 \
+		handle $number flower\n"
+	test_rules_inserted[$index]=false
+}
+
+test_rule_add_or_remove()
+{
+	local iface=$1
+	local tcflags=$2
+	local index=$3
+
+	if ! [ ${test_rules_inserted[$index]} ] ; then
+		test_rules_inserted[$index]=false
+	fi
+	if ${test_rules_inserted[$index]} ; then
+		test_rule_del $iface $index
+	else
+		test_rule_add $iface $tcflags $index
+	fi
+}
+
+test_rule_add_or_remove_random_batch()
+{
+	local iface=$1
+	local tcflags=$2
+	local total_count=$3
+	local skip=0
+	local count=0
+	local MAXSKIP=20
+	local MAXCOUNT=20
+
+	for ((i=1;i<=total_count;i++)); do
+		if (( $skip == 0 )) && (($count == 0)); then
+			((skip=$RANDOM % $MAXSKIP + 1))
+			((count=$RANDOM % $MAXCOUNT + 1))
+		fi
+		if (( $skip != 0 )); then
+			((skip-=1))
+		else
+			((count-=1))
+			test_rule_add_or_remove $iface $tcflags $i
+		fi
+	done
+}
+
+delta_massive_ipv6_rehash_test()
+{
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 0
+	check_err $? "Failed to set ACL region rehash interval"
+
+	tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_fail $? "Rehash trace was hit even when rehash should be disabled"
+
+	RANDOM=4432897
+	declare batch=""
+	test_rule_add_or_remove_random_batch $h2 $tcflags 5000
+
+	echo -n -e $batch | tc -b -
+
+	declare batch=""
+	test_rule_add_or_remove_random_batch $h2 $tcflags 5000
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 3000
+	check_err $? "Failed to set ACL region rehash interval"
+
+	sleep 1
+
+	tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \
+		$tcflags dst_ip 2001:db8:1::0/121 action drop
+	tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \
+		$tcflags dst_ip 2001:db8:2::2 action drop
+	tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \
+		$tcflags dst_ip 2001:db8:3::0/120 action drop
+
+	$MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \
+		-A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	echo -n -e $batch | tc -b -
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 0
+	check_err $? "Failed to set ACL region rehash interval"
+
+	$MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \
+		-A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match on correct filter after rehash"
+
+	tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower
+
+	declare batch=""
+	for i in {1..5000}; do
+		test_rule_del $h2 $tcflags $i
+	done
+	echo -e $batch | tc -b -
+
+	log_test "delta massive IPv6 rehash test ($tcflags)"
+}
+
+bloom_simple_test()
+{
+	# Bloom filter requires that the eRP table is used. This test
+	# verifies that Bloom filter is not harming correctness of ACLs.
+	# First, make sure that eRP table is used and then set rule patterns
+	# which are distant enough and will result skipping a lookup after
+	# consulting the Bloom filter. Although some eRP lookups are skipped,
+	# the correct filter should be hit.
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 5 handle 104 flower \
+		$tcflags dst_ip 198.51.100.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.0.0/8 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Two filters - did not match highest priority"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 104 1
+	check_err $? "Single filter - did not match"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Low prio filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 198.0.0.0/8 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Two filters - did not match highest priority after add"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 5 handle 104 flower
+
+	log_test "bloom simple test ($tcflags)"
+}
+
+bloom_complex_test()
+{
+	# Bloom filter index computation is affected from region ID, eRP
+	# ID and from the region key size. In order to excercise those parts
+	# of the Bloom filter code, use a series of regions, each with a
+	# different key size and send packet that should hit all of them.
+	local index
+
+	RET=0
+	NUM_CHAINS=4
+	BASE_INDEX=100
+
+	# Create chain with up to 2 key blocks (ip_proto only)
+	tc chain add dev $h2 ingress chain 1 protocol ip flower \
+		ip_proto tcp &> /dev/null
+	# Create chain with 2-4 key blocks (ip_proto, src MAC)
+	tc chain add dev $h2 ingress chain 2 protocol ip flower \
+		ip_proto tcp \
+		src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null
+	# Create chain with 4-8 key blocks (ip_proto, src & dst MAC, IPv4 dest)
+	tc chain add dev $h2 ingress chain 3 protocol ip flower \
+		ip_proto tcp \
+		dst_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \
+		src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \
+		dst_ip 0.0.0.0/32 &> /dev/null
+	# Default chain contains all fields and therefore is 8-12 key blocks
+	tc chain add dev $h2 ingress chain 4
+
+	# We need at least 2 rules in every region to have eRP table active
+	# so create a dummy rule per chain using a different pattern
+	for i in $(eval echo {0..$NUM_CHAINS}); do
+		index=$((BASE_INDEX - 1 - i))
+		tc filter add dev $h2 ingress chain $i protocol ip \
+			pref 2 handle $index flower \
+			$tcflags ip_proto tcp action drop
+	done
+
+	# Add rules to test Bloom filter, each in a different chain
+	index=$BASE_INDEX
+	tc filter add dev $h2 ingress protocol ip \
+		pref 1 handle $((++index)) flower \
+		$tcflags dst_ip 192.0.0.0/16 action goto chain 1
+	tc filter add dev $h2 ingress chain 1 protocol ip \
+		pref 1 handle $((++index)) flower \
+		$tcflags action goto chain 2
+	tc filter add dev $h2 ingress chain 2 protocol ip \
+		pref 1 handle $((++index)) flower \
+		$tcflags src_mac $h1mac action goto chain 3
+	tc filter add dev $h2 ingress chain 3 protocol ip \
+		pref 1 handle $((++index)) flower \
+		$tcflags dst_ip 192.0.0.0/8 action goto chain 4
+	tc filter add dev $h2 ingress chain 4 protocol ip \
+		pref 1 handle $((++index)) flower \
+		$tcflags src_ip 192.0.2.0/24 action drop
+
+	# Send a packet that is supposed to hit all chains
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	for i in $(eval echo {0..$NUM_CHAINS}); do
+		index=$((BASE_INDEX + i + 1))
+		tc_check_packets "dev $h2 ingress" $index 1
+		check_err $? "Did not match chain $i"
+	done
+
+	# Rules cleanup
+	for i in $(eval echo {$NUM_CHAINS..0}); do
+		index=$((BASE_INDEX - i - 1))
+		tc filter del dev $h2 ingress chain $i \
+			pref 2 handle $index flower
+		index=$((BASE_INDEX + i + 1))
+		tc filter del dev $h2 ingress chain $i \
+			pref 1 handle $index flower
+	done
+
+	# Chains cleanup
+	for i in $(eval echo {$NUM_CHAINS..1}); do
+		tc chain del dev $h2 ingress chain $i
+	done
+
+	log_test "bloom complex test ($tcflags)"
+}
+
+
+bloom_delta_test()
+{
+	# When multiple masks are used, the eRP table is activated. When
+	# masks are close enough (delta) the masks reside on the same
+	# eRP table. This test verifies that the eRP table is correctly
+	# allocated and used in delta condition and that Bloom filter is
+	# still functional with delta.
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.1.0.0/16 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.1.2.1 -B 192.1.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Single filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.2.1.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.2.1.1 -B 192.2.1.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Delta filters - did not match second filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "bloom delta test ($tcflags)"
+}
+
+max_erp_entries_test()
+{
+	# The number of eRP entries is limited. Once the maximum number of eRPs
+	# has been reached, filters cannot be added. This test verifies that
+	# when this limit is reached, inserstion fails without crashing.
+
+	RET=0
+
+	local num_masks=32
+	local num_regions=15
+	local chain_failed
+	local mask_failed
+	local ret
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	for ((i=1; i < $num_regions; i++)); do
+		for ((j=$num_masks; j >= 0; j--)); do
+			tc filter add dev $h2 ingress chain $i protocol ip \
+				pref $i	handle $j flower $tcflags \
+				dst_ip 192.1.0.0/$j &> /dev/null
+			ret=$?
+
+			if [ $ret -ne 0 ]; then
+				chain_failed=$i
+				mask_failed=$j
+				break 2
+			fi
+		done
+	done
+
+	# We expect to exceed the maximum number of eRP entries, so that
+	# insertion eventually fails. Otherwise, the test should be adjusted to
+	# add more filters.
+	check_fail $ret "expected to exceed number of eRP entries"
+
+	for ((; i >= 1; i--)); do
+		for ((j=0; j <= $num_masks; j++)); do
+			tc filter del dev $h2 ingress chain $i protocol ip \
+				pref $i handle $j flower &> /dev/null
+		done
+	done
+
+	log_test "max eRP entries test ($tcflags). " \
+		"max chain $chain_failed, mask $mask_failed"
+}
+
+max_group_size_test()
+{
+	# The number of ACLs in an ACL group is limited. Once the maximum
+	# number of ACLs has been reached, filters cannot be added. This test
+	# verifies that when this limit is reached, insertion fails without
+	# crashing.
+
+	RET=0
+
+	local num_acls=32
+	local max_size
+	local ret
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	for ((i=1; i < $num_acls; i++)); do
+		if [[ $(( i % 2 )) == 1 ]]; then
+			tc filter add dev $h2 ingress pref $i proto ipv4 \
+				flower $tcflags dst_ip 198.51.100.1/32 \
+				ip_proto tcp tcp_flags 0x01/0x01 \
+				action drop &> /dev/null
+		else
+			tc filter add dev $h2 ingress pref $i proto ipv6 \
+				flower $tcflags dst_ip 2001:db8:1::1/128 \
+				action drop &> /dev/null
+		fi
+
+		ret=$?
+		[[ $ret -ne 0 ]] && max_size=$((i - 1)) && break
+	done
+
+	# We expect to exceed the maximum number of ACLs in a group, so that
+	# insertion eventually fails. Otherwise, the test should be adjusted to
+	# add more filters.
+	check_fail $ret "expected to exceed number of ACLs in a group"
+
+	for ((; i >= 1; i--)); do
+		if [[ $(( i % 2 )) == 1 ]]; then
+			tc filter del dev $h2 ingress pref $i proto ipv4 \
+				flower $tcflags dst_ip 198.51.100.1/32 \
+				ip_proto tcp tcp_flags 0x01/0x01 \
+				action drop &> /dev/null
+		else
+			tc filter del dev $h2 ingress pref $i proto ipv6 \
+				flower $tcflags dst_ip 2001:db8:1::1/128 \
+				action drop &> /dev/null
+		fi
+	done
+
+	log_test "max ACL group size test ($tcflags). max size $max_size"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+if ! tc_offload_check; then
+	check_err 1 "Could not test offloaded functionality"
+	log_test "mlxsw-specific tests for tc flower"
+	exit
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh
new file mode 100644
index 000000000..efd798a85
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../tc_flower_scale.sh
+
+tc_flower_get_target()
+{
+	local should_fail=$1; shift
+
+	# The driver associates a counter with each tc filter, which means the
+	# number of supported filters is bounded by the number of available
+	# counters.
+	# Currently, the driver supports 30K (30,720) flow counters and six of
+	# these are used for multicast routing.
+	local target=30714
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh
new file mode 100644
index 000000000..e79ac0dad
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../tc_police_scale.sh
+
+tc_police_get_target()
+{
+	local should_fail=$1; shift
+	local target
+
+	target=$(devlink_resource_size_get global_policers single_rate_policers)
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}