diff options
Diffstat (limited to 'Documentation/ABI/testing/sysfs-bus-iio-isl29501')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-isl29501 | 47 |
1 files changed, 47 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-isl29501 b/Documentation/ABI/testing/sysfs-bus-iio-isl29501 new file mode 100644 index 000000000..d009cfbbd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-isl29501 @@ -0,0 +1,47 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain_bias +KernelVersion: 4.18 +Contact: linux-iio@vger.kernel.org +Description: + This sensor has an automatic gain control (agc) loop + which sets the analog signal levels at an optimum + level by controlling programmable gain amplifiers. The + criteria for optimal gain is determined by the sensor. + + Return the actual gain value as an integer in [0; 65536] + range when read from. + + The agc gain read when measuring crosstalk shall be + written into in_proximity0_agc_gain_bias. + +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_a +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_b +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_a +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_b +KernelVersion: 4.18 +Contact: linux-iio@vger.kernel.org +Description: + The sensor is able to perform correction of distance + measurements due to changing temperature and ambient + light conditions. It can be programmed to correct for + a second order error polynomial. + + Phase data has to be collected when temperature and + ambient light are modulated independently. + + Then a least squares curve fit to a second order + polynomial has to be generated from the data. The + resultant curves have the form ax^2 + bx + c. + + From those two curves, a and b coefficients shall be + stored in in_proximity0_calib_phase_temp_a and + in_proximity0_calib_phase_temp_b for temperature and + in in_proximity0_calib_phase_light_a and + in_proximity0_calib_phase_light_b for ambient light. + + Those values must be integer in [0; 8355840] range. + + Finally, the c constant is set by the sensor + internally. + + The value stored in sensor is displayed when read from. |