diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm/coresight-cti.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/arm/coresight-cti.yaml | 332 |
1 files changed, 332 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml new file mode 100644 index 000000000..21e351549 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -0,0 +1,332 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Coresight Cross Trigger Interface (CTI) device. + +description: | + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected + to one or more CoreSight components and/or a CPU, with CTIs interconnected in + a star topology via the Cross Trigger Matrix (CTM), which is not programmable. + The ECT components are not part of the trace generation data path and are thus + not part of the CoreSight graph described in the general CoreSight bindings + file coresight.txt. + + The CTI component properties define the connections between the individual + CTI and the components it is directly connected to, consisting of input and + output hardware trigger signals. CTIs can have a maximum number of input and + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The + number is defined at design time, the maximum of each defined in the DEVID + register. + + CTIs are interconnected in a star topology via the CTM, using a number of + programmable channels, usually 4, but again implementation defined and + described in the DEVID register. The star topology is not required to be + described in the bindings as the actual connections are software + programmable. + + In general the connections between CTI and components via the trigger signals + are implementation defined, except when the CTI is connected to an ARM v8 + architecture core and optional ETM. + + In this case the ARM v8 architecture defines the required signal connections + between CTI and the CPU core and ETM if present. In the case of a v8 + architecturally connected CTI an additional compatible string is used to + indicate this feature (arm,coresight-cti-v8-arch). + + When CTI trigger connection information is unavailable then a minimal driver + binding can be declared with no explicit trigger signals. This will result + the driver detecting the maximum available triggers and channels from the + DEVID register and make them all available for use as a single default + connection. Any user / client application will require additional information + on the connections between the CTI and other components for correct operation. + This information might be found by enabling the Integration Test registers in + the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel + configuration). These registers may be used to explore the trigger connections + between CTI and other CoreSight components. + + Certain triggers between CoreSight devices and the CTI have specific types + and usages. These can be defined along with the signal indexes with the + constants defined in <dt-bindings/arm/coresight-cti-dt.h> + + For example a CTI connected to a core will usually have a DBGREQ signal. This + is defined in the binding as type PE_EDBGREQ. These types will appear in an + optional array alongside the signal indexes. Omitting types will default all + signals to GEN_IO. + + Note that some hardware trigger signals can be connected to non-CoreSight + components (e.g. UART etc) depending on hardware implementation. + +maintainers: + - Mike Leach <mike.leach@linaro.org> + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + enum: + - arm,coresight-cti + required: + - compatible + +properties: + $nodename: + pattern: "^cti(@[0-9a-f]+)$" + compatible: + oneOf: + - items: + - const: arm,coresight-cti + - const: arm,primecell + - items: + - const: arm,coresight-cti-v8-arch + - const: arm,coresight-cti + - const: arm,primecell + + reg: + maxItems: 1 + + cpu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Handle to cpu this device is associated with. This must appear in the + base cti node if compatible string arm,coresight-cti-v8-arch is used, + or may appear in a trig-conns child node when appropriate. + + arm,cti-ctm-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the CTM this CTI is connected to, in large systems with multiple + separate CTI/CTM nets. Typically multi-socket systems where the CTM is + propagated between sockets. + + arm,cs-dev-assoc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + defines a phandle reference to an associated CoreSight trace device. + When the associated trace device is enabled, then the respective CTI + will be enabled. Use in a trig-conns node, or in CTI base node when + compatible string arm,coresight-cti-v8-arch used. If the associated + device has not been registered then the node name will be stored as + the connection name for later resolution. If the associated device is + not a CoreSight device or not registered then the node name will remain + the connection name and automatic enabling will not occur. + + # size cells and address cells required if trig-conns node present. + "#size-cells": + const: 0 + + "#address-cells": + const: 1 + +patternProperties: + '^trig-conns@([0-9]+)$': + type: object + description: + A trigger connections child node which describes the trigger signals + between this CTI and another hardware device. This device may be a CPU, + CoreSight device, any other hardware device or simple external IO lines. + The connection may have both input and output triggers, or only one or the + other. + + properties: + reg: + maxItems: 1 + + arm,trig-in-sigs: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger in signal numbers in use by a trig-conns node. + + arm,trig-in-types: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger in + signals. Types in this array match to the corresponding signal in the + arm,trig-in-sigs array. If the -types array is smaller, or omitted + completely, then the types will default to GEN_IO. + + arm,trig-out-sigs: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signal numbers in use by a trig-conns node. + + arm,trig-out-types: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger out + signals. Types in this array match to the corresponding signal + in the arm,trig-out-sigs array. If the "-types" array is smaller, + or omitted completely, then the types will default to GEN_IO. + + arm,trig-filters: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signals that will be blocked from becoming + active, unless filtering is disabled on the driver. + + arm,trig-conn-name: + $ref: /schemas/types.yaml#/definitions/string + description: + Defines a connection name that will be displayed, if the cpu or + arm,cs-dev-assoc properties are not being used in this connection. + Principle use for CTI that are connected to non-CoreSight devices, or + external IO. + + anyOf: + - required: + - arm,trig-in-sigs + - required: + - arm,trig-out-sigs + oneOf: + - required: + - arm,trig-conn-name + - required: + - cpu + - required: + - arm,cs-dev-assoc + required: + - reg + +required: + - compatible + - reg + - clocks + - clock-names + +if: + properties: + compatible: + contains: + const: arm,coresight-cti-v8-arch + +then: + required: + - cpu + +unevaluatedProperties: false + +examples: + # minimum CTI definition. DEVID register used to set number of triggers. + - | + cti@20020000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x20020000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + # v8 architecturally defined CTI - CPU + ETM connections generated by the + # driver according to the v8 architecture specification. + - | + cti@859000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x859000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + }; + # Implementation defined CTI - CPU + ETM connections explicitly defined.. + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h + # #size-cells and #address-cells are required if trig-conns@ nodes present. + - | + #include <dt-bindings/arm/coresight-cti-dt.h> + + cti@858000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x858000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + arm,cti-ctm-id = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs = <4 5 6 7>; + arm,trig-in-types = <ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT>; + arm,trig-out-sigs = <4 5 6 7>; + arm,trig-out-types = <ETM_EXTIN + ETM_EXTIN + ETM_EXTIN + ETM_EXTIN>; + arm,cs-dev-assoc = <&etm0>; + }; + + trig-conns@1 { + reg = <1>; + cpu = <&CPU0>; + arm,trig-in-sigs = <0 1>; + arm,trig-in-types = <PE_DBGTRIGGER + PE_PMUIRQ>; + arm,trig-out-sigs=<0 1 2 >; + arm,trig-out-types = <PE_EDBGREQ + PE_DBGRESTART + PE_CTIIRQ>; + + arm,trig-filters = <0>; + }; + }; + # Implementation defined CTI - non CoreSight component connections. + - | + cti@20110000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x20110000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<0>; + arm,trig-in-types=<GEN_INTREQ>; + arm,trig-out-sigs=<0>; + arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-conn-name = "sys_profiler"; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "watchdog"; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-in-sigs=<1 6>; + arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "g_counter"; + }; + }; + +... |