1 files changed, 98 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
new file mode 100644
index 000000000..693ef3f18
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Performance Monitor Units
+
+maintainers:
+  - Mark Rutland <mark.rutland@arm.com>
+  - Will Deacon <will.deacon@arm.com>
+
+description: |+
+  ARM cores often have a PMU for counting cpu and cache events like cache misses
+  and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
+  representation in the device tree should be done as under:-
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apm,potenza-pmu
+          - arm,armv8-pmuv3 # Only for s/w models
+          - arm,arm1136-pmu
+          - arm,arm1176-pmu
+          - arm,arm11mpcore-pmu
+          - arm,cortex-a5-pmu
+          - arm,cortex-a7-pmu
+          - arm,cortex-a8-pmu
+          - arm,cortex-a9-pmu
+          - arm,cortex-a12-pmu
+          - arm,cortex-a15-pmu
+          - arm,cortex-a17-pmu
+          - arm,cortex-a32-pmu
+          - arm,cortex-a34-pmu
+          - arm,cortex-a35-pmu
+          - arm,cortex-a53-pmu
+          - arm,cortex-a55-pmu
+          - arm,cortex-a57-pmu
+          - arm,cortex-a65-pmu
+          - arm,cortex-a72-pmu
+          - arm,cortex-a73-pmu
+          - arm,cortex-a75-pmu
+          - arm,cortex-a76-pmu
+          - arm,cortex-a77-pmu
+          - arm,neoverse-e1-pmu
+          - arm,neoverse-n1-pmu
+          - brcm,vulcan-pmu
+          - cavium,thunder-pmu
+          - qcom,krait-pmu
+          - qcom,scorpion-pmu
+          - qcom,scorpion-mp-pmu
+
+  interrupts:
+    # Don't know how many CPUs, so no constraints to specify
+    description: 1 per-cpu interrupt (PPI) or 1 interrupt per core.
+
+  interrupt-affinity:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      When using SPIs, specifies a list of phandles to CPU
+      nodes corresponding directly to the affinity of
+      the SPIs listed in the interrupts property.
+
+      When using a PPI, specifies a list of phandles to CPU
+      nodes corresponding to the set of CPUs which have
+      a PMU of this type signalling the PPI listed in the
+      interrupts property, unless this is already specified
+      by the PPI interrupt specifier itself (in which case
+      the interrupt-affinity property shouldn't be present).
+
+      This property should be present when there is more than
+      a single SPI.
+
+  qcom,no-pc-write:
+    type: boolean
+    description:
+      Indicates that this PMU doesn't support the 0xc and 0xd events.
+
+  secure-reg-access:
+    type: boolean
+    description:
+      Indicates that the ARMv7 Secure Debug Enable Register
+      (SDER) is accessible. This will cause the driver to do
+      any setup required that is only possible in ARMv7 secure
+      state. If not present the ARMv7 SDER will not be touched,
+      which means the PMU may fail to operate unless external
+      code (bootloader or security monitor) has performed the
+      appropriate initialisation. Note that this property is
+      not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux
+      in Non-secure state.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+...