diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb/exynos-usb.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/exynos-usb.txt | 115 |
1 files changed, 115 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt new file mode 100644 index 000000000..6aae1544f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -0,0 +1,115 @@ +Samsung Exynos SoC USB controller + +The USB devices interface with USB controllers on Exynos SOCs. +The device node has following properties. + +EHCI +Required properties: + - compatible: should be "samsung,exynos4210-ehci" for USB 2.0 + EHCI controller in host mode. + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + - clocks: from common clock binding: handle to usb clock. + - clock-names: from common clock binding: Shall be "usbhost". + - phys: from the *Generic PHY* bindings; array specifying phy(s) used + by the root port. + - phy-names: from the *Generic PHY* bindings; array of the names for + each phy for the root ports, must be a subset of the following: + "host", "hsic0", "hsic1". + +Optional properties: + - samsung,vbus-gpio: if present, specifies the GPIO that + needs to be pulled up for the bus to be powered. + +Example: + + usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + samsung,vbus-gpio = <&gpx2 6 1 3 3>; + + clocks = <&clock 285>; + clock-names = "usbhost"; + + phys = <&usb2phy 1>; + phy-names = "host"; + }; + +OHCI +Required properties: + - compatible: should be "samsung,exynos4210-ohci" for USB 2.0 + OHCI companion controller in host mode. + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + - clocks: from common clock binding: handle to usb clock. + - clock-names: from common clock binding: Shall be "usbhost". + - phys: from the *Generic PHY* bindings; array specifying phy(s) used + by the root port. + - phy-names: from the *Generic PHY* bindings; array of the names for + each phy for the root ports, must be a subset of the following: + "host", "hsic0", "hsic1". + +Example: + usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock 285>; + clock-names = "usbhost"; + + phys = <&usb2phy 1>; + phy-names = "host"; + }; + +DWC3 +Required properties: + - compatible: should be one of the following - + "samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on + Exynos5250/5420. + "samsung,exynos5433-dwusb3": for USB 3.0 DWC3 controller on + Exynos5433. + "samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7. + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - ranges: allows valid 1:1 translation between child's address space and + parent's address space + - clocks: Clock IDs array as required by the controller. + - clock-names: Names of clocks corresponding to IDs in the clock property. + Following clock names shall be provided for different + compatibles: + - samsung,exynos5250-dwusb3: "usbdrd30", + - samsung,exynos5433-dwusb3: "aclk", "susp_clk", "pipe_pclk", + "phyclk", + - samsung,exynos7-dwusb3: "usbdrd30", "usbdrd30_susp_clk", + "usbdrd30_axius_clk" + - vdd10-supply: 1.0V powr supply + - vdd33-supply: 3.0V/3.3V power supply + +Sub-nodes: +The dwc3 core should be added as subnode to Exynos dwc3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +Example: + usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock 286>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + vdd10-supply = <&ldo11_reg>; + vdd33-supply = <&ldo9_reg>; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + usb-phy = <&usb2_phy &usb3_phy>; + }; + }; |