diff options
Diffstat (limited to 'arch/arm/boot/dts/bcm63138.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/bcm63138.dtsi | 229 |
1 files changed, 229 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi new file mode 100644 index 000000000..cca49a2e2 --- /dev/null +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Broadcom BCM63138 DSL SoCs Device Tree + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm63138"; + model = "Broadcom BCM63138 DSL SoC"; + interrupt-parent = <&gic>; + + aliases { + uart0 = &serial0; + uart1 = &serial1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0>; + enable-method = "brcm,bcm63138"; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <1>; + enable-method = "brcm,bcm63138"; + resets = <&pmb0 4 1>; + }; + }; + + clocks { + /* UBUS peripheral clock */ + periph_clk: periph_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "periph"; + }; + + /* peripheral clock for system timer */ + axi_clk: axi_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&armpll>; + clock-div = <2>; + clock-mult = <1>; + }; + + /* APB bus clock */ + apb_clk: apb_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&armpll>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + /* ARM bus */ + axi@80000000 { + compatible = "simple-bus"; + ranges = <0 0x80000000 0x784000>; + #address-cells = <1>; + #size-cells = <1>; + + L2: cache-controller@1d000 { + compatible = "arm,pl310-cache"; + reg = <0x1d000 0x1000>; + cache-unified; + cache-level = <2>; + cache-size = <524288>; + cache-sets = <1024>; + cache-line-size = <32>; + interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + + scu: scu@1e000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1e000 0x100>; + }; + + gic: interrupt-controller@1f000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x1f000 0x1000 + 0x1e100 0x100>; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + }; + + global_timer: timer@1e200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x1e200 0x20>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; + clocks = <&axi_clk>; + }; + + local_timer: local-timer@1e600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1e600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&axi_clk>; + }; + + twd_watchdog: watchdog@1e620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x1e620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + armpll: armpll@20000 { + #clock-cells = <0>; + compatible = "brcm,bcm63138-armpll"; + clocks = <&periph_clk>; + reg = <0x20000 0xf00>; + }; + + pmb0: reset-controller@4800c0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800c0 0x10>; + #reset-cells = <2>; + }; + + pmb1: reset-controller@4800e0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800e0 0x10>; + #reset-cells = <2>; + }; + + ahci: sata@a000 { + compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0xa000 0x9ac>, <0x8040 0x24>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&pmb0 3 1>; + reset-names = "ahci"; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + }; + + sata_phy: sata-phy@8100 { + compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3"; + reg = <0x8100 0x1e00>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + }; + + /* Legacy UBUS base */ + ubus@fffe8000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffe8000 0x8100>; + + timer: timer@80 { + compatible = "brcm,bcm6328-timer", "syscon"; + reg = <0x80 0x3c>; + }; + + serial0: serial@600 { + compatible = "brcm,bcm6345-uart"; + reg = <0x600 0x1b>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "periph"; + status = "disabled"; + }; + + serial1: serial@620 { + compatible = "brcm,bcm6345-uart"; + reg = <0x620 0x1b>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "periph"; + status = "disabled"; + }; + + nand_controller: nand-controller@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand"; + reg = <0x2000 0x600>, <0xf0 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "nand"; + }; + + bootlut: bootlut@8000 { + compatible = "brcm,bcm63138-bootlut"; + reg = <0x8000 0x50>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x34>; + mask = <1>; + }; + }; +}; |