diff options
Diffstat (limited to 'arch/arm/boot/dts/imx7d.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx7d.dtsi | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi new file mode 100644 index 000000000..b0bcfa909 --- /dev/null +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Freescale Semiconductor, Inc. +// Copyright 2016 Toradex AG + +#include "imx7s.dtsi" +#include <dt-bindings/reset/imx7-reset.h> + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; + }; + + cpus { + cpu0: cpu@0 { + clock-frequency = <996000000>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + nvmem-cells = <&fuse_grade>; + nvmem-cell-names = "speed_grade"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + clock-frequency = <996000000>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + cpu-idle-states = <&cpu_sleep_wait>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0xd>, <0x7>; + opp-suspend; + }; + + opp-996000000 { + opp-hz = /bits/ 64 <996000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0xc>, <0x7>; + opp-suspend; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1225000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0x8>, <0x3>; + opp-suspend; + }; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; + + soc { + etm@3007d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007d000 0x1000>; + + /* + * System will hang if added nosmp in kernel command line + * without arm,primecell-periphid because amba bus try to + * read id and core1 power off at this time. + */ + arm,primecell-periphid = <0xbb956>; + cpu = <&cpu1>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; + }; + }; + }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + reg = <0x31001000 0x1000>, + <0x31002000 0x2000>, + <0x31004000 0x2000>, + <0x31006000 0x2000>; + }; + }; +}; + +&aips2 { + pcie_phy: pcie-phy@306d0000 { + compatible = "fsl,imx7d-pcie-phy"; + reg = <0x306d0000 0x10000>; + status = "disabled"; + }; +}; + +&aips3 { + usbotg2: usb@30b20000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b20000 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbmisc2: usbmisc@30b20200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b20200 0x200>; + }; + + fec2: ethernet@30bf0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30bf0000 0x10000>; + interrupt-names = "int0", "int1", "int2", "pps"; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + fsl,stop-mode = <&gpr 0x10 4>; + status = "disabled"; + }; + + pcie: pcie@33800000 { + compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; + reg = <0x33800000 0x4000>, + <0x4ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + /* + * Reference manual lists pci irqs incorrectly + * Real hardware ordering is same as imx6: D+MSI, C, B, A + */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, + <&clks IMX7D_PCIE_PHY_ROOT_CLK>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; + assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>, + <&clks IMX7D_PCIE_PHY_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie_phy>; + resets = <&src IMX7_RESET_PCIEPHY>, + <&src IMX7_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + fsl,imx7d-pcie-phy = <&pcie_phy>; + status = "disabled"; + }; +}; + +&ca_funnel_in_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + ca_funnel_in_port1: endpoint { + remote-endpoint = <&etm1_out_port>; + }; + }; +}; |