diff options
Diffstat (limited to 'drivers/crypto/caam/dpseci.h')
| -rw-r--r-- | drivers/crypto/caam/dpseci.h | 335 |
1 files changed, 335 insertions, 0 deletions
diff --git a/drivers/crypto/caam/dpseci.h b/drivers/crypto/caam/dpseci.h new file mode 100644 index 000000000..6dcd9be81 --- /dev/null +++ b/drivers/crypto/caam/dpseci.h @@ -0,0 +1,335 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright 2013-2016 Freescale Semiconductor Inc. + * Copyright 2017-2018 NXP + */ +#ifndef _DPSECI_H_ +#define _DPSECI_H_ + +/* + * Data Path SEC Interface API + * Contains initialization APIs and runtime control APIs for DPSECI + */ + +struct fsl_mc_io; + +/** + * General DPSECI macros + */ + +/** + * Maximum number of Tx/Rx queues per DPSECI object + */ +#define DPSECI_MAX_QUEUE_NUM 16 + +/** + * All queues considered; see dpseci_set_rx_queue() + */ +#define DPSECI_ALL_QUEUES (u8)(-1) + +int dpseci_open(struct fsl_mc_io *mc_io, u32 cmd_flags, int dpseci_id, + u16 *token); + +int dpseci_close(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token); + +/** + * Enable the Congestion Group support + */ +#define DPSECI_OPT_HAS_CG 0x000020 + +/** + * struct dpseci_cfg - Structure representing DPSECI configuration + * @options: Any combination of the following flags: + * DPSECI_OPT_HAS_CG + * @num_tx_queues: num of queues towards the SEC + * @num_rx_queues: num of queues back from the SEC + * @priorities: Priorities for the SEC hardware processing; + * each place in the array is the priority of the tx queue + * towards the SEC; + * valid priorities are configured with values 1-8; + */ +struct dpseci_cfg { + u32 options; + u8 num_tx_queues; + u8 num_rx_queues; + u8 priorities[DPSECI_MAX_QUEUE_NUM]; +}; + +int dpseci_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token); + +int dpseci_disable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token); + +int dpseci_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token); + +int dpseci_is_enabled(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, + int *en); + +/** + * struct dpseci_attr - Structure representing DPSECI attributes + * @id: DPSECI object ID + * @num_tx_queues: number of queues towards the SEC + * @num_rx_queues: number of queues back from the SEC + * @options: any combination of the following flags: + * DPSECI_OPT_HAS_CG + */ +struct dpseci_attr { + int id; + u8 num_tx_queues; + u8 num_rx_queues; + u32 options; +}; + +int dpseci_get_attributes(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, + struct dpseci_attr *attr); + +/** + * enum dpseci_dest - DPSECI destination types + * @DPSECI_DEST_NONE: Unassigned destination; The queue is set in parked mode + * and does not generate FQDAN notifications; user is expected to dequeue + * from the queue based on polling or other user-defined method + * @DPSECI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN + * notifications to the specified DPIO; user is expected to dequeue from + * the queue only after notification is received + * @DPSECI_DEST_DPCON: The queue is set in schedule mode and does not generate + * FQDAN notifications, but is connected to the specified DPCON object; + * user is expected to dequeue from the DPCON channel + */ +enum dpseci_dest { + DPSECI_DEST_NONE = 0, + DPSECI_DEST_DPIO, + DPSECI_DEST_DPCON +}; + +/** + * struct dpseci_dest_cfg - Structure representing DPSECI destination parameters + * @dest_type: Destination type + * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type + * @priority: Priority selection within the DPIO or DPCON channel; valid values + * are 0-1 or 0-7, depending on the number of priorities in that channel; + * not relevant for 'DPSECI_DEST_NONE' option + */ +struct dpseci_dest_cfg { + enum dpseci_dest dest_type; + int dest_id; + u8 priority; +}; + +/** + * DPSECI queue modification options + */ + +/** + * Select to modify the user's context associated with the queue + */ +#define DPSECI_QUEUE_OPT_USER_CTX 0x00000001 + +/** + * Select to modify the queue's destination + */ +#define DPSECI_QUEUE_OPT_DEST 0x00000002 + +/** + * Select to modify the queue's order preservation + */ +#define DPSECI_QUEUE_OPT_ORDER_PRESERVATION 0x00000004 + +/** + * struct dpseci_rx_queue_cfg - DPSECI RX queue configuration + * @options: Flags representing the suggested modifications to the queue; + * Use any combination of 'DPSECI_QUEUE_OPT_<X>' flags + * @order_preservation_en: order preservation configuration for the rx queue + * valid only if 'DPSECI_QUEUE_OPT_ORDER_PRESERVATION' is contained in 'options' + * @user_ctx: User context value provided in the frame descriptor of each + * dequeued frame; valid only if 'DPSECI_QUEUE_OPT_USER_CTX' is contained + * in 'options' + * @dest_cfg: Queue destination parameters; valid only if + * 'DPSECI_QUEUE_OPT_DEST' is contained in 'options' + */ +struct dpseci_rx_queue_cfg { + u32 options; + int order_preservation_en; + u64 user_ctx; + struct dpseci_dest_cfg dest_cfg; +}; + +int dpseci_set_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, + u8 queue, const struct dpseci_rx_queue_cfg *cfg); + +/** + * struct dpseci_rx_queue_attr - Structure representing attributes of Rx queues + * @user_ctx: User context value provided in the frame descriptor of each + * dequeued frame + * @order_preservation_en: Status of the order preservation configuration on the + * queue + * @dest_cfg: Queue destination configuration + * @fqid: Virtual FQID value to be used for dequeue operations + */ +struct dpseci_rx_queue_attr { + u64 user_ctx; + int order_preservation_en; + struct dpseci_dest_cfg dest_cfg; + u32 fqid; +}; + +int dpseci_get_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, + u8 queue, struct dpseci_rx_queue_attr *attr); + +/** + * struct dpseci_tx_queue_attr - Structure representing attributes of Tx queues + * @fqid: Virtual FQID to be used for sending frames to SEC hardware + * @priority: SEC hardware processing priority for the queue + */ +struct dpseci_tx_queue_attr { + u32 fqid; + u8 priority; +}; + +int dpseci_get_tx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, + u8 queue, struct dpseci_tx_queue_attr *attr); + +/** + * struct dpseci_sec_attr - Structure representing attributes of the SEC + * hardware accelerator + * @ip_id: ID for SEC + * @major_rev: Major revision number for SEC + * @minor_rev: Minor revision number for SEC + * @era: SEC Era + * @deco_num: The number of copies of the DECO that are implemented in this + * version of SEC + * @zuc_auth_acc_num: The number of copies of ZUCA that are implemented in this + * version of SEC + * @zuc_enc_acc_num: The number of copies of ZUCE that are implemented in this + * version of SEC + * @snow_f8_acc_num: The number of copies of the SNOW-f8 module that are + * implemented in this version of SEC + * @snow_f9_acc_num: The number of copies of the SNOW-f9 module that are + * implemented in this version of SEC + * @crc_acc_num: The number of copies of the CRC module that are implemented in + * this version of SEC + * @pk_acc_num: The number of copies of the Public Key module that are + * implemented in this version of SEC + * @kasumi_acc_num: The number of copies of the Kasumi module that are + * implemented in this version of SEC + * @rng_acc_num: The number of copies of the Random Number Generator that are + * implemented in this version of SEC + * @md_acc_num: The number of copies of the MDHA (Hashing module) that are + * implemented in this version of SEC + * @arc4_acc_num: The number of copies of the ARC4 module that are implemented + * in this version of SEC + * @des_acc_num: The number of copies of the DES module that are implemented in + * this version of SEC + * @aes_acc_num: The number of copies of the AES module that are implemented in + * this version of SEC + * @ccha_acc_num: The number of copies of the ChaCha20 module that are + * implemented in this version of SEC. + * @ptha_acc_num: The number of copies of the Poly1305 module that are + * implemented in this version of SEC. + **/ +struct dpseci_sec_attr { + u16 ip_id; + u8 major_rev; + u8 minor_rev; + u8 era; + u8 deco_num; + u8 zuc_auth_acc_num; + u8 zuc_enc_acc_num; + u8 snow_f8_acc_num; + u8 snow_f9_acc_num; + u8 crc_acc_num; + u8 pk_acc_num; + u8 kasumi_acc_num; + u8 rng_acc_num; + u8 md_acc_num; + u8 arc4_acc_num; + u8 des_acc_num; + u8 aes_acc_num; + u8 ccha_acc_num; + u8 ptha_acc_num; +}; + +int dpseci_get_sec_attr(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, + struct dpseci_sec_attr *attr); + +int dpseci_get_api_version(struct fsl_mc_io *mc_io, u32 cmd_flags, + u16 *major_ver, u16 *minor_ver); + +/** + * enum dpseci_congestion_unit - DPSECI congestion units + * @DPSECI_CONGESTION_UNIT_BYTES: bytes units + * @DPSECI_CONGESTION_UNIT_FRAMES: frames units + */ +enum dpseci_congestion_unit { + DPSECI_CONGESTION_UNIT_BYTES = 0, + DPSECI_CONGESTION_UNIT_FRAMES +}; + +/** + * CSCN message is written to message_iova once entering a + * congestion state (see 'threshold_entry') + */ +#define DPSECI_CGN_MODE_WRITE_MEM_ON_ENTER 0x00000001 + +/** + * CSCN message is written to message_iova once exiting a + * congestion state (see 'threshold_exit') + */ +#define DPSECI_CGN_MODE_WRITE_MEM_ON_EXIT 0x00000002 + +/** + * CSCN write will attempt to allocate into a cache (coherent write); + * valid only if 'DPSECI_CGN_MODE_WRITE_MEM_<X>' is selected + */ +#define DPSECI_CGN_MODE_COHERENT_WRITE 0x00000004 + +/** + * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' CSCN message is sent to + * DPIO/DPCON's WQ channel once entering a congestion state + * (see 'threshold_entry') + */ +#define DPSECI_CGN_MODE_NOTIFY_DEST_ON_ENTER 0x00000008 + +/** + * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' CSCN message is sent to + * DPIO/DPCON's WQ channel once exiting a congestion state + * (see 'threshold_exit') + */ +#define DPSECI_CGN_MODE_NOTIFY_DEST_ON_EXIT 0x00000010 + +/** + * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' when the CSCN is written + * to the sw-portal's DQRR, the DQRI interrupt is asserted immediately + * (if enabled) + */ +#define DPSECI_CGN_MODE_INTR_COALESCING_DISABLED 0x00000020 + +/** + * struct dpseci_congestion_notification_cfg - congestion notification + * configuration + * @units: units type + * @threshold_entry: above this threshold we enter a congestion state. + * set it to '0' to disable it + * @threshold_exit: below this threshold we exit the congestion state. + * @message_ctx: The context that will be part of the CSCN message + * @message_iova: I/O virtual address (must be in DMA-able memory), + * must be 16B aligned; + * @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel + * @notification_mode: Mask of available options; use 'DPSECI_CGN_MODE_<X>' + * values + */ +struct dpseci_congestion_notification_cfg { + enum dpseci_congestion_unit units; + u32 threshold_entry; + u32 threshold_exit; + u64 message_ctx; + u64 message_iova; + struct dpseci_dest_cfg dest_cfg; + u16 notification_mode; +}; + +int dpseci_set_congestion_notification(struct fsl_mc_io *mc_io, u32 cmd_flags, + u16 token, const struct dpseci_congestion_notification_cfg *cfg); + +int dpseci_get_congestion_notification(struct fsl_mc_io *mc_io, u32 cmd_flags, + u16 token, struct dpseci_congestion_notification_cfg *cfg); + +#endif /* _DPSECI_H_ */ |