1 files changed, 308 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c
new file mode 100644
index 000000000..88535f5aa
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drm_simple_kms_helper.h>
+
+#include "cdv_device.h"
+#include "intel_bios.h"
+#include "power.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+
+
+static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	u32 temp, reg;
+	reg = ADPA;
+
+	temp = REG_READ(reg);
+	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
+	temp &= ~ADPA_DAC_ENABLE;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		temp |= ADPA_DAC_ENABLE;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	}
+
+	REG_WRITE(reg, temp);
+}
+
+static enum drm_mode_status cdv_intel_crt_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* The lowest clock for CDV is 20000KHz */
+	if (mode->clock < 20000)
+		return MODE_CLOCK_LOW;
+
+	/* The max clock for CDV is 355 instead of 400 */
+	if (mode->clock > 355000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void cdv_intel_crt_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+	int dpll_md_reg;
+	u32 adpa, dpll_md;
+	u32 adpa_reg;
+
+	if (gma_crtc->pipe == 0)
+		dpll_md_reg = DPLL_A_MD;
+	else
+		dpll_md_reg = DPLL_B_MD;
+
+	adpa_reg = ADPA;
+
+	/*
+	 * Disable separate mode multiplier used when cloning SDVO to CRT
+	 * XXX this needs to be adjusted when we really are cloning
+	 */
+	{
+		dpll_md = REG_READ(dpll_md_reg);
+		REG_WRITE(dpll_md_reg,
+			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
+	}
+
+	adpa = 0;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
+
+	if (gma_crtc->pipe == 0)
+		adpa |= ADPA_PIPE_A_SELECT;
+	else
+		adpa |= ADPA_PIPE_B_SELECT;
+
+	REG_WRITE(adpa_reg, adpa);
+}
+
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
+ *
+ * \return true if CRT is connected.
+ * \return false if CRT is disconnected.
+ */
+static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
+								bool force)
+{
+	struct drm_device *dev = connector->dev;
+	u32 hotplug_en;
+	int i, tries = 0, ret = false;
+	u32 orig;
+
+	/*
+	 * On a CDV thep, CRT detect sequence need to be done twice
+	 * to get a reliable result.
+	 */
+	tries = 2;
+
+	orig = hotplug_en = REG_READ(PORT_HOTPLUG_EN);
+	hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK);
+	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
+
+	hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+
+	for (i = 0; i < tries ; i++) {
+		unsigned long timeout;
+		/* turn on the FORCE_DETECT */
+		REG_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+		timeout = jiffies + msecs_to_jiffies(1000);
+		/* wait for FORCE_DETECT to go off */
+		do {
+			if (!(REG_READ(PORT_HOTPLUG_EN) &
+					CRT_HOTPLUG_FORCE_DETECT))
+				break;
+			msleep(1);
+		} while (time_after(timeout, jiffies));
+	}
+
+	if ((REG_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
+	    CRT_HOTPLUG_MONITOR_NONE)
+		ret = true;
+
+	 /* clear the interrupt we just generated, if any */
+	REG_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
+
+	/* and put the bits back */
+	REG_WRITE(PORT_HOTPLUG_EN, orig);
+	return ret;
+}
+
+static enum drm_connector_status cdv_intel_crt_detect(
+				struct drm_connector *connector, bool force)
+{
+	if (cdv_intel_crt_detect_hotplug(connector, force))
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
+}
+
+static void cdv_intel_crt_destroy(struct drm_connector *connector)
+{
+	struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
+
+	psb_intel_i2c_destroy(gma_encoder->ddc_bus);
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static int cdv_intel_crt_get_modes(struct drm_connector *connector)
+{
+	struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
+	return psb_intel_ddc_get_modes(connector,
+				       &gma_encoder->ddc_bus->adapter);
+}
+
+static int cdv_intel_crt_set_property(struct drm_connector *connector,
+				  struct drm_property *property,
+				  uint64_t value)
+{
+	return 0;
+}
+
+/*
+ * Routines for controlling stuff on the analog port
+ */
+
+static const struct drm_encoder_helper_funcs cdv_intel_crt_helper_funcs = {
+	.dpms = cdv_intel_crt_dpms,
+	.prepare = gma_encoder_prepare,
+	.commit = gma_encoder_commit,
+	.mode_set = cdv_intel_crt_mode_set,
+};
+
+static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = cdv_intel_crt_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = cdv_intel_crt_destroy,
+	.set_property = cdv_intel_crt_set_property,
+};
+
+static const struct drm_connector_helper_funcs
+				cdv_intel_crt_connector_helper_funcs = {
+	.mode_valid = cdv_intel_crt_mode_valid,
+	.get_modes = cdv_intel_crt_get_modes,
+	.best_encoder = gma_best_encoder,
+};
+
+void cdv_intel_crt_init(struct drm_device *dev,
+			struct psb_intel_mode_device *mode_dev)
+{
+
+	struct gma_connector *gma_connector;
+	struct gma_encoder *gma_encoder;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+
+	u32 i2c_reg;
+
+	gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL);
+	if (!gma_encoder)
+		return;
+
+	gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL);
+	if (!gma_connector)
+		goto failed_connector;
+
+	connector = &gma_connector->base;
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+	drm_connector_init(dev, connector,
+		&cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+	encoder = &gma_encoder->base;
+	drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_DAC);
+
+	gma_connector_attach_encoder(gma_connector, gma_encoder);
+
+	/* Set up the DDC bus. */
+	i2c_reg = GPIOA;
+	/* Remove the following code for CDV */
+	/*
+	if (dev_priv->crt_ddc_bus != 0)
+		i2c_reg = dev_priv->crt_ddc_bus;
+	}*/
+	gma_encoder->ddc_bus = psb_intel_i2c_create(dev,
+							  i2c_reg, "CRTDDC_A");
+	if (!gma_encoder->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
+			   "failed.\n");
+		goto failed_ddc;
+	}
+
+	gma_encoder->type = INTEL_OUTPUT_ANALOG;
+	/*
+	psb_intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT);
+	psb_intel_output->crtc_mask = (1 << 0) | (1 << 1);
+	*/
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs);
+	drm_connector_helper_add(connector,
+					&cdv_intel_crt_connector_helper_funcs);
+
+	drm_connector_register(connector);
+
+	return;
+failed_ddc:
+	drm_encoder_cleanup(&gma_encoder->base);
+	drm_connector_cleanup(&gma_connector->base);
+	kfree(gma_connector);
+failed_connector:
+	kfree(gma_encoder);
+	return;
+}