diff options
Diffstat (limited to 'drivers/hwmon/max1111.c')
| -rw-r--r-- | drivers/hwmon/max1111.c | 293 |
1 files changed, 293 insertions, 0 deletions
diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c new file mode 100644 index 000000000..5fcfd57df --- /dev/null +++ b/drivers/hwmon/max1111.c @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * max1111.c - +2.7V, Low-Power, Multichannel, Serial 8-bit ADCs + * + * Based on arch/arm/mach-pxa/corgi_ssp.c + * + * Copyright (C) 2004-2005 Richard Purdie + * + * Copyright (C) 2008 Marvell International Ltd. + * Eric Miao <eric.miao@marvell.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/spi/spi.h> +#include <linux/slab.h> + +enum chips { max1110, max1111, max1112, max1113 }; + +#define MAX1111_TX_BUF_SIZE 1 +#define MAX1111_RX_BUF_SIZE 2 + +/* MAX1111 Commands */ +#define MAX1111_CTRL_PD0 (1u << 0) +#define MAX1111_CTRL_PD1 (1u << 1) +#define MAX1111_CTRL_SGL (1u << 2) +#define MAX1111_CTRL_UNI (1u << 3) +#define MAX1110_CTRL_SEL_SH (4) +#define MAX1111_CTRL_SEL_SH (5) /* NOTE: bit 4 is ignored */ +#define MAX1111_CTRL_STR (1u << 7) + +struct max1111_data { + struct spi_device *spi; + struct device *hwmon_dev; + struct spi_message msg; + struct spi_transfer xfer[2]; + uint8_t tx_buf[MAX1111_TX_BUF_SIZE]; + uint8_t rx_buf[MAX1111_RX_BUF_SIZE]; + struct mutex drvdata_lock; + /* protect msg, xfer and buffers from multiple access */ + int sel_sh; + int lsb; +}; + +static int max1111_read(struct device *dev, int channel) +{ + struct max1111_data *data = dev_get_drvdata(dev); + uint8_t v1, v2; + int err; + + /* writing to drvdata struct is not thread safe, wait on mutex */ + mutex_lock(&data->drvdata_lock); + + data->tx_buf[0] = (channel << data->sel_sh) | + MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 | + MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR; + + err = spi_sync(data->spi, &data->msg); + if (err < 0) { + dev_err(dev, "spi_sync failed with %d\n", err); + mutex_unlock(&data->drvdata_lock); + return err; + } + + v1 = data->rx_buf[0]; + v2 = data->rx_buf[1]; + + mutex_unlock(&data->drvdata_lock); + + if ((v1 & 0xc0) || (v2 & 0x3f)) + return -EINVAL; + + return (v1 << 2) | (v2 >> 6); +} + +#ifdef CONFIG_SHARPSL_PM +static struct max1111_data *the_max1111; + +int max1111_read_channel(int channel) +{ + if (!the_max1111 || !the_max1111->spi) + return -ENODEV; + + return max1111_read(&the_max1111->spi->dev, channel); +} +EXPORT_SYMBOL(max1111_read_channel); +#endif + +/* + * NOTE: SPI devices do not have a default 'name' attribute, which is + * likely to be used by hwmon applications to distinguish between + * different devices, explicitly add a name attribute here. + */ +static ssize_t name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%s\n", to_spi_device(dev)->modalias); +} + +static ssize_t show_adc(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct max1111_data *data = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int ret; + + ret = max1111_read(dev, channel); + if (ret < 0) + return ret; + + /* + * Assume the reference voltage to be 2.048V or 4.096V, with an 8-bit + * sample. The LSB weight is 8mV or 16mV depending on the chip type. + */ + return sprintf(buf, "%d\n", ret * data->lsb); +} + +#define MAX1111_ADC_ATTR(_id) \ + SENSOR_DEVICE_ATTR(in##_id##_input, S_IRUGO, show_adc, NULL, _id) + +static DEVICE_ATTR_RO(name); +static MAX1111_ADC_ATTR(0); +static MAX1111_ADC_ATTR(1); +static MAX1111_ADC_ATTR(2); +static MAX1111_ADC_ATTR(3); +static MAX1111_ADC_ATTR(4); +static MAX1111_ADC_ATTR(5); +static MAX1111_ADC_ATTR(6); +static MAX1111_ADC_ATTR(7); + +static struct attribute *max1111_attributes[] = { + &dev_attr_name.attr, + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + NULL, +}; + +static const struct attribute_group max1111_attr_group = { + .attrs = max1111_attributes, +}; + +static struct attribute *max1110_attributes[] = { + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + NULL, +}; + +static const struct attribute_group max1110_attr_group = { + .attrs = max1110_attributes, +}; + +static int setup_transfer(struct max1111_data *data) +{ + struct spi_message *m; + struct spi_transfer *x; + + m = &data->msg; + x = &data->xfer[0]; + + spi_message_init(m); + + x->tx_buf = &data->tx_buf[0]; + x->len = MAX1111_TX_BUF_SIZE; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &data->rx_buf[0]; + x->len = MAX1111_RX_BUF_SIZE; + spi_message_add_tail(x, m); + + return 0; +} + +static int max1111_probe(struct spi_device *spi) +{ + enum chips chip = spi_get_device_id(spi)->driver_data; + struct max1111_data *data; + int err; + + spi->bits_per_word = 8; + spi->mode = SPI_MODE_0; + err = spi_setup(spi); + if (err < 0) + return err; + + data = devm_kzalloc(&spi->dev, sizeof(struct max1111_data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + switch (chip) { + case max1110: + data->lsb = 8; + data->sel_sh = MAX1110_CTRL_SEL_SH; + break; + case max1111: + data->lsb = 8; + data->sel_sh = MAX1111_CTRL_SEL_SH; + break; + case max1112: + data->lsb = 16; + data->sel_sh = MAX1110_CTRL_SEL_SH; + break; + case max1113: + data->lsb = 16; + data->sel_sh = MAX1111_CTRL_SEL_SH; + break; + } + err = setup_transfer(data); + if (err) + return err; + + mutex_init(&data->drvdata_lock); + + data->spi = spi; + spi_set_drvdata(spi, data); + + err = sysfs_create_group(&spi->dev.kobj, &max1111_attr_group); + if (err) { + dev_err(&spi->dev, "failed to create attribute group\n"); + return err; + } + if (chip == max1110 || chip == max1112) { + err = sysfs_create_group(&spi->dev.kobj, &max1110_attr_group); + if (err) { + dev_err(&spi->dev, + "failed to create extended attribute group\n"); + goto err_remove; + } + } + + data->hwmon_dev = hwmon_device_register(&spi->dev); + if (IS_ERR(data->hwmon_dev)) { + dev_err(&spi->dev, "failed to create hwmon device\n"); + err = PTR_ERR(data->hwmon_dev); + goto err_remove; + } + +#ifdef CONFIG_SHARPSL_PM + the_max1111 = data; +#endif + return 0; + +err_remove: + sysfs_remove_group(&spi->dev.kobj, &max1110_attr_group); + sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group); + return err; +} + +static int max1111_remove(struct spi_device *spi) +{ + struct max1111_data *data = spi_get_drvdata(spi); + +#ifdef CONFIG_SHARPSL_PM + the_max1111 = NULL; +#endif + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&spi->dev.kobj, &max1110_attr_group); + sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group); + mutex_destroy(&data->drvdata_lock); + return 0; +} + +static const struct spi_device_id max1111_ids[] = { + { "max1110", max1110 }, + { "max1111", max1111 }, + { "max1112", max1112 }, + { "max1113", max1113 }, + { }, +}; +MODULE_DEVICE_TABLE(spi, max1111_ids); + +static struct spi_driver max1111_driver = { + .driver = { + .name = "max1111", + }, + .id_table = max1111_ids, + .probe = max1111_probe, + .remove = max1111_remove, +}; + +module_spi_driver(max1111_driver); + +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); +MODULE_DESCRIPTION("MAX1110/MAX1111/MAX1112/MAX1113 ADC Driver"); +MODULE_LICENSE("GPL"); |