diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-xlr.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-xlr.c | 470 |
1 files changed, 470 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c new file mode 100644 index 000000000..9ce20652d --- /dev/null +++ b/drivers/i2c/busses/i2c-xlr.c @@ -0,0 +1,470 @@ +/* + * Copyright 2011, Netlogic Microsystems Inc. + * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/of_device.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/wait.h> + +/* XLR I2C REGISTERS */ +#define XLR_I2C_CFG 0x00 +#define XLR_I2C_CLKDIV 0x01 +#define XLR_I2C_DEVADDR 0x02 +#define XLR_I2C_ADDR 0x03 +#define XLR_I2C_DATAOUT 0x04 +#define XLR_I2C_DATAIN 0x05 +#define XLR_I2C_STATUS 0x06 +#define XLR_I2C_STARTXFR 0x07 +#define XLR_I2C_BYTECNT 0x08 +#define XLR_I2C_HDSTATIM 0x09 + +/* Sigma Designs additional registers */ +#define XLR_I2C_INT_EN 0x09 +#define XLR_I2C_INT_STAT 0x0a + +/* XLR I2C REGISTERS FLAGS */ +#define XLR_I2C_BUS_BUSY 0x01 +#define XLR_I2C_SDOEMPTY 0x02 +#define XLR_I2C_RXRDY 0x04 +#define XLR_I2C_ACK_ERR 0x08 +#define XLR_I2C_ARB_STARTERR 0x30 + +/* Register Values */ +#define XLR_I2C_CFG_ADDR 0xF8 +#define XLR_I2C_CFG_NOADDR 0xFA +#define XLR_I2C_STARTXFR_ND 0x02 /* No Data */ +#define XLR_I2C_STARTXFR_RD 0x01 /* Read */ +#define XLR_I2C_STARTXFR_WR 0x00 /* Write */ + +#define XLR_I2C_TIMEOUT 10 /* timeout per byte in msec */ + +/* + * On XLR/XLS, we need to use __raw_ IO to read the I2C registers + * because they are in the big-endian MMIO area on the SoC. + * + * The readl/writel implementation on XLR/XLS byteswaps, because + * those are for its little-endian PCI space (see arch/mips/Kconfig). + */ +static inline void xlr_i2c_wreg(u32 __iomem *base, unsigned int reg, u32 val) +{ + __raw_writel(val, base + reg); +} + +static inline u32 xlr_i2c_rdreg(u32 __iomem *base, unsigned int reg) +{ + return __raw_readl(base + reg); +} + +#define XLR_I2C_FLAG_IRQ 1 + +struct xlr_i2c_config { + u32 flags; /* optional feature support */ + u32 status_busy; /* value of STATUS[0] when busy */ + u32 cfg_extra; /* extra CFG bits to set */ +}; + +struct xlr_i2c_private { + struct i2c_adapter adap; + u32 __iomem *iobase; + int irq; + int pos; + struct i2c_msg *msg; + const struct xlr_i2c_config *cfg; + wait_queue_head_t wait; + struct clk *clk; +}; + +static int xlr_i2c_busy(struct xlr_i2c_private *priv, u32 status) +{ + return (status & XLR_I2C_BUS_BUSY) == priv->cfg->status_busy; +} + +static int xlr_i2c_idle(struct xlr_i2c_private *priv) +{ + return !xlr_i2c_busy(priv, xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS)); +} + +static int xlr_i2c_wait(struct xlr_i2c_private *priv, unsigned long timeout) +{ + int status; + int t; + + t = wait_event_timeout(priv->wait, xlr_i2c_idle(priv), + msecs_to_jiffies(timeout)); + if (!t) + return -ETIMEDOUT; + + status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); + + return status & XLR_I2C_ACK_ERR ? -EIO : 0; +} + +static void xlr_i2c_tx_irq(struct xlr_i2c_private *priv, u32 status) +{ + struct i2c_msg *msg = priv->msg; + + if (status & XLR_I2C_SDOEMPTY) + xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, + msg->buf[priv->pos++]); +} + +static void xlr_i2c_rx_irq(struct xlr_i2c_private *priv, u32 status) +{ + struct i2c_msg *msg = priv->msg; + + if (status & XLR_I2C_RXRDY) + msg->buf[priv->pos++] = + xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN); +} + +static irqreturn_t xlr_i2c_irq(int irq, void *dev_id) +{ + struct xlr_i2c_private *priv = dev_id; + struct i2c_msg *msg = priv->msg; + u32 int_stat, status; + + int_stat = xlr_i2c_rdreg(priv->iobase, XLR_I2C_INT_STAT); + if (!int_stat) + return IRQ_NONE; + + xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_STAT, int_stat); + + if (!msg) + return IRQ_HANDLED; + + status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); + + if (priv->pos < msg->len) { + if (msg->flags & I2C_M_RD) + xlr_i2c_rx_irq(priv, status); + else + xlr_i2c_tx_irq(priv, status); + } + + if (!xlr_i2c_busy(priv, status)) + wake_up(&priv->wait); + + return IRQ_HANDLED; +} + +static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len, + u8 *buf, u16 addr) +{ + struct i2c_adapter *adap = &priv->adap; + unsigned long timeout, stoptime, checktime; + u32 i2c_status; + int pos, timedout; + u8 offset; + u32 xfer; + + offset = buf[0]; + xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset); + xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr); + xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, + XLR_I2C_CFG_ADDR | priv->cfg->cfg_extra); + + timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT); + stoptime = jiffies + timeout; + timedout = 0; + + if (len == 1) { + xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1); + xfer = XLR_I2C_STARTXFR_ND; + pos = 1; + } else { + xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 2); + xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[1]); + xfer = XLR_I2C_STARTXFR_WR; + pos = 2; + } + + priv->pos = pos; + +retry: + /* retry can only happen on the first byte */ + xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, xfer); + + if (priv->irq > 0) + return xlr_i2c_wait(priv, XLR_I2C_TIMEOUT * len); + + while (!timedout) { + checktime = jiffies; + i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); + + if ((i2c_status & XLR_I2C_SDOEMPTY) && pos < len) { + xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos++]); + + /* reset timeout on successful xmit */ + stoptime = jiffies + timeout; + } + timedout = time_after(checktime, stoptime); + + if (i2c_status & XLR_I2C_ARB_STARTERR) { + if (timedout) + break; + goto retry; + } + + if (i2c_status & XLR_I2C_ACK_ERR) + return -EIO; + + if (!xlr_i2c_busy(priv, i2c_status) && pos >= len) + return 0; + } + dev_err(&adap->dev, "I2C transmit timeout\n"); + return -ETIMEDOUT; +} + +static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr) +{ + struct i2c_adapter *adap = &priv->adap; + u32 i2c_status; + unsigned long timeout, stoptime, checktime; + int nbytes, timedout; + + xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, + XLR_I2C_CFG_NOADDR | priv->cfg->cfg_extra); + xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1); + xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr); + + priv->pos = 0; + + timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT); + stoptime = jiffies + timeout; + timedout = 0; + nbytes = 0; +retry: + xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, XLR_I2C_STARTXFR_RD); + + if (priv->irq > 0) + return xlr_i2c_wait(priv, XLR_I2C_TIMEOUT * len); + + while (!timedout) { + checktime = jiffies; + i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); + if (i2c_status & XLR_I2C_RXRDY) { + if (nbytes >= len) + return -EIO; /* should not happen */ + + buf[nbytes++] = + xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN); + + /* reset timeout on successful read */ + stoptime = jiffies + timeout; + } + + timedout = time_after(checktime, stoptime); + if (i2c_status & XLR_I2C_ARB_STARTERR) { + if (timedout) + break; + goto retry; + } + + if (i2c_status & XLR_I2C_ACK_ERR) + return -EIO; + + if (!xlr_i2c_busy(priv, i2c_status)) + return 0; + } + + dev_err(&adap->dev, "I2C receive timeout\n"); + return -ETIMEDOUT; +} + +static int xlr_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct i2c_msg *msg; + int i; + int ret = 0; + struct xlr_i2c_private *priv = i2c_get_adapdata(adap); + + ret = clk_enable(priv->clk); + if (ret) + return ret; + + if (priv->irq) + xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0xf); + + + for (i = 0; ret == 0 && i < num; i++) { + msg = &msgs[i]; + priv->msg = msg; + if (msg->flags & I2C_M_RD) + ret = xlr_i2c_rx(priv, msg->len, &msg->buf[0], + msg->addr); + else + ret = xlr_i2c_tx(priv, msg->len, &msg->buf[0], + msg->addr); + } + + if (priv->irq) + xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0); + + clk_disable(priv->clk); + priv->msg = NULL; + + return (ret != 0) ? ret : num; +} + +static u32 xlr_func(struct i2c_adapter *adap) +{ + /* Emulate SMBUS over I2C */ + return (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | I2C_FUNC_I2C; +} + +static const struct i2c_algorithm xlr_i2c_algo = { + .master_xfer = xlr_i2c_xfer, + .functionality = xlr_func, +}; + +static const struct i2c_adapter_quirks xlr_i2c_quirks = { + .flags = I2C_AQ_NO_ZERO_LEN, +}; + +static const struct xlr_i2c_config xlr_i2c_config_default = { + .status_busy = XLR_I2C_BUS_BUSY, + .cfg_extra = 0, +}; + +static const struct xlr_i2c_config xlr_i2c_config_tangox = { + .flags = XLR_I2C_FLAG_IRQ, + .status_busy = 0, + .cfg_extra = 1 << 8, +}; + +static const struct of_device_id xlr_i2c_dt_ids[] = { + { + .compatible = "sigma,smp8642-i2c", + .data = &xlr_i2c_config_tangox, + }, + { } +}; +MODULE_DEVICE_TABLE(of, xlr_i2c_dt_ids); + +static int xlr_i2c_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct xlr_i2c_private *priv; + struct clk *clk; + unsigned long clk_rate; + unsigned long clk_div; + u32 busfreq; + int irq; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + match = of_match_device(xlr_i2c_dt_ids, &pdev->dev); + if (match) + priv->cfg = match->data; + else + priv->cfg = &xlr_i2c_config_default; + + priv->iobase = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->iobase)) + return PTR_ERR(priv->iobase); + + irq = platform_get_irq(pdev, 0); + + if (irq > 0 && (priv->cfg->flags & XLR_I2C_FLAG_IRQ)) { + priv->irq = irq; + + xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0); + xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_STAT, 0xf); + + ret = devm_request_irq(&pdev->dev, priv->irq, xlr_i2c_irq, + IRQF_SHARED, dev_name(&pdev->dev), + priv); + if (ret) + return ret; + + init_waitqueue_head(&priv->wait); + } + + if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &busfreq)) + busfreq = I2C_MAX_STANDARD_MODE_FREQ; + + clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(clk)) { + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + clk_rate = clk_get_rate(clk); + clk_div = DIV_ROUND_UP(clk_rate, 2 * busfreq); + xlr_i2c_wreg(priv->iobase, XLR_I2C_CLKDIV, clk_div); + + clk_disable(clk); + priv->clk = clk; + } + + priv->adap.dev.parent = &pdev->dev; + priv->adap.dev.of_node = pdev->dev.of_node; + priv->adap.owner = THIS_MODULE; + priv->adap.algo_data = priv; + priv->adap.algo = &xlr_i2c_algo; + priv->adap.quirks = &xlr_i2c_quirks; + priv->adap.nr = pdev->id; + priv->adap.class = I2C_CLASS_HWMON; + snprintf(priv->adap.name, sizeof(priv->adap.name), "xlr-i2c"); + + i2c_set_adapdata(&priv->adap, priv); + ret = i2c_add_numbered_adapter(&priv->adap); + if (ret < 0) + goto err_unprepare_clk; + + platform_set_drvdata(pdev, priv); + dev_info(&priv->adap.dev, "Added I2C Bus.\n"); + return 0; + +err_unprepare_clk: + clk_unprepare(clk); + return ret; +} + +static int xlr_i2c_remove(struct platform_device *pdev) +{ + struct xlr_i2c_private *priv; + + priv = platform_get_drvdata(pdev); + i2c_del_adapter(&priv->adap); + clk_unprepare(priv->clk); + + return 0; +} + +static struct platform_driver xlr_i2c_driver = { + .probe = xlr_i2c_probe, + .remove = xlr_i2c_remove, + .driver = { + .name = "xlr-i2cbus", + .of_match_table = xlr_i2c_dt_ids, + }, +}; + +module_platform_driver(xlr_i2c_driver); + +MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@netlogicmicro.com>"); +MODULE_DESCRIPTION("XLR/XLS SoC I2C Controller driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:xlr-i2cbus"); |