diff options
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_tx.c')
| -rw-r--r-- | drivers/infiniband/hw/qib/qib_tx.c | 568 |
1 files changed, 568 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_tx.c b/drivers/infiniband/hw/qib/qib_tx.c new file mode 100644 index 000000000..29785eb84 --- /dev/null +++ b/drivers/infiniband/hw/qib/qib_tx.c @@ -0,0 +1,568 @@ +/* + * Copyright (c) 2008, 2009, 2010 QLogic Corporation. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/spinlock.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> +#include <linux/moduleparam.h> + +#include "qib.h" + +static unsigned qib_hol_timeout_ms = 3000; +module_param_named(hol_timeout_ms, qib_hol_timeout_ms, uint, S_IRUGO); +MODULE_PARM_DESC(hol_timeout_ms, + "duration of user app suspension after link failure"); + +unsigned qib_sdma_fetch_arb = 1; +module_param_named(fetch_arb, qib_sdma_fetch_arb, uint, S_IRUGO); +MODULE_PARM_DESC(fetch_arb, "IBA7220: change SDMA descriptor arbitration"); + +/** + * qib_disarm_piobufs - cancel a range of PIO buffers + * @dd: the qlogic_ib device + * @first: the first PIO buffer to cancel + * @cnt: the number of PIO buffers to cancel + * + * Cancel a range of PIO buffers. Used at user process close, + * in case it died while writing to a PIO buffer. + */ +void qib_disarm_piobufs(struct qib_devdata *dd, unsigned first, unsigned cnt) +{ + unsigned long flags; + unsigned i; + unsigned last; + + last = first + cnt; + spin_lock_irqsave(&dd->pioavail_lock, flags); + for (i = first; i < last; i++) { + __clear_bit(i, dd->pio_need_disarm); + dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(i)); + } + spin_unlock_irqrestore(&dd->pioavail_lock, flags); +} + +/* + * This is called by a user process when it sees the DISARM_BUFS event + * bit is set. + */ +int qib_disarm_piobufs_ifneeded(struct qib_ctxtdata *rcd) +{ + struct qib_devdata *dd = rcd->dd; + unsigned i; + unsigned last; + unsigned n = 0; + + last = rcd->pio_base + rcd->piocnt; + /* + * Don't need uctxt_lock here, since user has called in to us. + * Clear at start in case more interrupts set bits while we + * are disarming + */ + if (rcd->user_event_mask) { + /* + * subctxt_cnt is 0 if not shared, so do base + * separately, first, then remaining subctxt, if any + */ + clear_bit(_QIB_EVENT_DISARM_BUFS_BIT, &rcd->user_event_mask[0]); + for (i = 1; i < rcd->subctxt_cnt; i++) + clear_bit(_QIB_EVENT_DISARM_BUFS_BIT, + &rcd->user_event_mask[i]); + } + spin_lock_irq(&dd->pioavail_lock); + for (i = rcd->pio_base; i < last; i++) { + if (__test_and_clear_bit(i, dd->pio_need_disarm)) { + n++; + dd->f_sendctrl(rcd->ppd, QIB_SENDCTRL_DISARM_BUF(i)); + } + } + spin_unlock_irq(&dd->pioavail_lock); + return 0; +} + +static struct qib_pportdata *is_sdma_buf(struct qib_devdata *dd, unsigned i) +{ + struct qib_pportdata *ppd; + unsigned pidx; + + for (pidx = 0; pidx < dd->num_pports; pidx++) { + ppd = dd->pport + pidx; + if (i >= ppd->sdma_state.first_sendbuf && + i < ppd->sdma_state.last_sendbuf) + return ppd; + } + return NULL; +} + +/* + * Return true if send buffer is being used by a user context. + * Sets _QIB_EVENT_DISARM_BUFS_BIT in user_event_mask as a side effect + */ +static int find_ctxt(struct qib_devdata *dd, unsigned bufn) +{ + struct qib_ctxtdata *rcd; + unsigned ctxt; + int ret = 0; + + spin_lock(&dd->uctxt_lock); + for (ctxt = dd->first_user_ctxt; ctxt < dd->cfgctxts; ctxt++) { + rcd = dd->rcd[ctxt]; + if (!rcd || bufn < rcd->pio_base || + bufn >= rcd->pio_base + rcd->piocnt) + continue; + if (rcd->user_event_mask) { + int i; + /* + * subctxt_cnt is 0 if not shared, so do base + * separately, first, then remaining subctxt, if any + */ + set_bit(_QIB_EVENT_DISARM_BUFS_BIT, + &rcd->user_event_mask[0]); + for (i = 1; i < rcd->subctxt_cnt; i++) + set_bit(_QIB_EVENT_DISARM_BUFS_BIT, + &rcd->user_event_mask[i]); + } + ret = 1; + break; + } + spin_unlock(&dd->uctxt_lock); + + return ret; +} + +/* + * Disarm a set of send buffers. If the buffer might be actively being + * written to, mark the buffer to be disarmed later when it is not being + * written to. + * + * This should only be called from the IRQ error handler. + */ +void qib_disarm_piobufs_set(struct qib_devdata *dd, unsigned long *mask, + unsigned cnt) +{ + struct qib_pportdata *ppd, *pppd[QIB_MAX_IB_PORTS]; + unsigned i; + unsigned long flags; + + for (i = 0; i < dd->num_pports; i++) + pppd[i] = NULL; + + for (i = 0; i < cnt; i++) { + if (!test_bit(i, mask)) + continue; + /* + * If the buffer is owned by the DMA hardware, + * reset the DMA engine. + */ + ppd = is_sdma_buf(dd, i); + if (ppd) { + pppd[ppd->port] = ppd; + continue; + } + /* + * If the kernel is writing the buffer or the buffer is + * owned by a user process, we can't clear it yet. + */ + spin_lock_irqsave(&dd->pioavail_lock, flags); + if (test_bit(i, dd->pio_writing) || + (!test_bit(i << 1, dd->pioavailkernel) && + find_ctxt(dd, i))) { + __set_bit(i, dd->pio_need_disarm); + } else { + dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(i)); + } + spin_unlock_irqrestore(&dd->pioavail_lock, flags); + } + + /* do cancel_sends once per port that had sdma piobufs in error */ + for (i = 0; i < dd->num_pports; i++) + if (pppd[i]) + qib_cancel_sends(pppd[i]); +} + +/** + * update_send_bufs - update shadow copy of the PIO availability map + * @dd: the qlogic_ib device + * + * called whenever our local copy indicates we have run out of send buffers + */ +static void update_send_bufs(struct qib_devdata *dd) +{ + unsigned long flags; + unsigned i; + const unsigned piobregs = dd->pioavregs; + + /* + * If the generation (check) bits have changed, then we update the + * busy bit for the corresponding PIO buffer. This algorithm will + * modify positions to the value they already have in some cases + * (i.e., no change), but it's faster than changing only the bits + * that have changed. + * + * We would like to do this atomicly, to avoid spinlocks in the + * critical send path, but that's not really possible, given the + * type of changes, and that this routine could be called on + * multiple cpu's simultaneously, so we lock in this routine only, + * to avoid conflicting updates; all we change is the shadow, and + * it's a single 64 bit memory location, so by definition the update + * is atomic in terms of what other cpu's can see in testing the + * bits. The spin_lock overhead isn't too bad, since it only + * happens when all buffers are in use, so only cpu overhead, not + * latency or bandwidth is affected. + */ + if (!dd->pioavailregs_dma) + return; + spin_lock_irqsave(&dd->pioavail_lock, flags); + for (i = 0; i < piobregs; i++) { + u64 pchbusy, pchg, piov, pnew; + + piov = le64_to_cpu(dd->pioavailregs_dma[i]); + pchg = dd->pioavailkernel[i] & + ~(dd->pioavailshadow[i] ^ piov); + pchbusy = pchg << QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT; + if (pchg && (pchbusy & dd->pioavailshadow[i])) { + pnew = dd->pioavailshadow[i] & ~pchbusy; + pnew |= piov & pchbusy; + dd->pioavailshadow[i] = pnew; + } + } + spin_unlock_irqrestore(&dd->pioavail_lock, flags); +} + +/* + * Debugging code and stats updates if no pio buffers available. + */ +static noinline void no_send_bufs(struct qib_devdata *dd) +{ + dd->upd_pio_shadow = 1; + + /* not atomic, but if we lose a stat count in a while, that's OK */ + qib_stats.sps_nopiobufs++; +} + +/* + * Common code for normal driver send buffer allocation, and reserved + * allocation. + * + * Do appropriate marking as busy, etc. + * Returns buffer pointer if one is found, otherwise NULL. + */ +u32 __iomem *qib_getsendbuf_range(struct qib_devdata *dd, u32 *pbufnum, + u32 first, u32 last) +{ + unsigned i, j, updated = 0; + unsigned nbufs; + unsigned long flags; + unsigned long *shadow = dd->pioavailshadow; + u32 __iomem *buf; + + if (!(dd->flags & QIB_PRESENT)) + return NULL; + + nbufs = last - first + 1; /* number in range to check */ + if (dd->upd_pio_shadow) { +update_shadow: + /* + * Minor optimization. If we had no buffers on last call, + * start out by doing the update; continue and do scan even + * if no buffers were updated, to be paranoid. + */ + update_send_bufs(dd); + updated++; + } + i = first; + /* + * While test_and_set_bit() is atomic, we do that and then the + * change_bit(), and the pair is not. See if this is the cause + * of the remaining armlaunch errors. + */ + spin_lock_irqsave(&dd->pioavail_lock, flags); + if (dd->last_pio >= first && dd->last_pio <= last) + i = dd->last_pio + 1; + if (!first) + /* adjust to min possible */ + nbufs = last - dd->min_kernel_pio + 1; + for (j = 0; j < nbufs; j++, i++) { + if (i > last) + i = !first ? dd->min_kernel_pio : first; + if (__test_and_set_bit((2 * i) + 1, shadow)) + continue; + /* flip generation bit */ + __change_bit(2 * i, shadow); + /* remember that the buffer can be written to now */ + __set_bit(i, dd->pio_writing); + if (!first && first != last) /* first == last on VL15, avoid */ + dd->last_pio = i; + break; + } + spin_unlock_irqrestore(&dd->pioavail_lock, flags); + + if (j == nbufs) { + if (!updated) + /* + * First time through; shadow exhausted, but may be + * buffers available, try an update and then rescan. + */ + goto update_shadow; + no_send_bufs(dd); + buf = NULL; + } else { + if (i < dd->piobcnt2k) + buf = (u32 __iomem *)(dd->pio2kbase + + i * dd->palign); + else if (i < dd->piobcnt2k + dd->piobcnt4k || !dd->piovl15base) + buf = (u32 __iomem *)(dd->pio4kbase + + (i - dd->piobcnt2k) * dd->align4k); + else + buf = (u32 __iomem *)(dd->piovl15base + + (i - (dd->piobcnt2k + dd->piobcnt4k)) * + dd->align4k); + if (pbufnum) + *pbufnum = i; + dd->upd_pio_shadow = 0; + } + + return buf; +} + +/* + * Record that the caller is finished writing to the buffer so we don't + * disarm it while it is being written and disarm it now if needed. + */ +void qib_sendbuf_done(struct qib_devdata *dd, unsigned n) +{ + unsigned long flags; + + spin_lock_irqsave(&dd->pioavail_lock, flags); + __clear_bit(n, dd->pio_writing); + if (__test_and_clear_bit(n, dd->pio_need_disarm)) + dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(n)); + spin_unlock_irqrestore(&dd->pioavail_lock, flags); +} + +/** + * qib_chg_pioavailkernel - change which send buffers are available for kernel + * @dd: the qlogic_ib device + * @start: the starting send buffer number + * @len: the number of send buffers + * @avail: true if the buffers are available for kernel use, false otherwise + */ +void qib_chg_pioavailkernel(struct qib_devdata *dd, unsigned start, + unsigned len, u32 avail, struct qib_ctxtdata *rcd) +{ + unsigned long flags; + unsigned end; + unsigned ostart = start; + + /* There are two bits per send buffer (busy and generation) */ + start *= 2; + end = start + len * 2; + + spin_lock_irqsave(&dd->pioavail_lock, flags); + /* Set or clear the busy bit in the shadow. */ + while (start < end) { + if (avail) { + unsigned long dma; + int i; + + /* + * The BUSY bit will never be set, because we disarm + * the user buffers before we hand them back to the + * kernel. We do have to make sure the generation + * bit is set correctly in shadow, since it could + * have changed many times while allocated to user. + * We can't use the bitmap functions on the full + * dma array because it is always little-endian, so + * we have to flip to host-order first. + * BITS_PER_LONG is slightly wrong, since it's + * always 64 bits per register in chip... + * We only work on 64 bit kernels, so that's OK. + */ + i = start / BITS_PER_LONG; + __clear_bit(QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT + start, + dd->pioavailshadow); + dma = (unsigned long) + le64_to_cpu(dd->pioavailregs_dma[i]); + if (test_bit((QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT + + start) % BITS_PER_LONG, &dma)) + __set_bit(QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT + + start, dd->pioavailshadow); + else + __clear_bit(QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT + + start, dd->pioavailshadow); + __set_bit(start, dd->pioavailkernel); + if ((start >> 1) < dd->min_kernel_pio) + dd->min_kernel_pio = start >> 1; + } else { + __set_bit(start + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT, + dd->pioavailshadow); + __clear_bit(start, dd->pioavailkernel); + if ((start >> 1) > dd->min_kernel_pio) + dd->min_kernel_pio = start >> 1; + } + start += 2; + } + + if (dd->min_kernel_pio > 0 && dd->last_pio < dd->min_kernel_pio - 1) + dd->last_pio = dd->min_kernel_pio - 1; + spin_unlock_irqrestore(&dd->pioavail_lock, flags); + + dd->f_txchk_change(dd, ostart, len, avail, rcd); +} + +/* + * Flush all sends that might be in the ready to send state, as well as any + * that are in the process of being sent. Used whenever we need to be + * sure the send side is idle. Cleans up all buffer state by canceling + * all pio buffers, and issuing an abort, which cleans up anything in the + * launch fifo. The cancel is superfluous on some chip versions, but + * it's safer to always do it. + * PIOAvail bits are updated by the chip as if a normal send had happened. + */ +void qib_cancel_sends(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + struct qib_ctxtdata *rcd; + unsigned long flags; + unsigned ctxt; + unsigned i; + unsigned last; + + /* + * Tell PSM to disarm buffers again before trying to reuse them. + * We need to be sure the rcd doesn't change out from under us + * while we do so. We hold the two locks sequentially. We might + * needlessly set some need_disarm bits as a result, if the + * context is closed after we release the uctxt_lock, but that's + * fairly benign, and safer than nesting the locks. + */ + for (ctxt = dd->first_user_ctxt; ctxt < dd->cfgctxts; ctxt++) { + spin_lock_irqsave(&dd->uctxt_lock, flags); + rcd = dd->rcd[ctxt]; + if (rcd && rcd->ppd == ppd) { + last = rcd->pio_base + rcd->piocnt; + if (rcd->user_event_mask) { + /* + * subctxt_cnt is 0 if not shared, so do base + * separately, first, then remaining subctxt, + * if any + */ + set_bit(_QIB_EVENT_DISARM_BUFS_BIT, + &rcd->user_event_mask[0]); + for (i = 1; i < rcd->subctxt_cnt; i++) + set_bit(_QIB_EVENT_DISARM_BUFS_BIT, + &rcd->user_event_mask[i]); + } + i = rcd->pio_base; + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + spin_lock_irqsave(&dd->pioavail_lock, flags); + for (; i < last; i++) + __set_bit(i, dd->pio_need_disarm); + spin_unlock_irqrestore(&dd->pioavail_lock, flags); + } else + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + } + + if (!(dd->flags & QIB_HAS_SEND_DMA)) + dd->f_sendctrl(ppd, QIB_SENDCTRL_DISARM_ALL | + QIB_SENDCTRL_FLUSH); +} + +/* + * Force an update of in-memory copy of the pioavail registers, when + * needed for any of a variety of reasons. + * If already off, this routine is a nop, on the assumption that the + * caller (or set of callers) will "do the right thing". + * This is a per-device operation, so just the first port. + */ +void qib_force_pio_avail_update(struct qib_devdata *dd) +{ + dd->f_sendctrl(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); +} + +void qib_hol_down(struct qib_pportdata *ppd) +{ + /* + * Cancel sends when the link goes DOWN so that we aren't doing it + * at INIT when we might be trying to send SMI packets. + */ + if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) + qib_cancel_sends(ppd); +} + +/* + * Link is at INIT. + * We start the HoL timer so we can detect stuck packets blocking SMP replies. + * Timer may already be running, so use mod_timer, not add_timer. + */ +void qib_hol_init(struct qib_pportdata *ppd) +{ + if (ppd->hol_state != QIB_HOL_INIT) { + ppd->hol_state = QIB_HOL_INIT; + mod_timer(&ppd->hol_timer, + jiffies + msecs_to_jiffies(qib_hol_timeout_ms)); + } +} + +/* + * Link is up, continue any user processes, and ensure timer + * is a nop, if running. Let timer keep running, if set; it + * will nop when it sees the link is up. + */ +void qib_hol_up(struct qib_pportdata *ppd) +{ + ppd->hol_state = QIB_HOL_UP; +} + +/* + * This is only called via the timer. + */ +void qib_hol_event(struct timer_list *t) +{ + struct qib_pportdata *ppd = from_timer(ppd, t, hol_timer); + + /* If hardware error, etc, skip. */ + if (!(ppd->dd->flags & QIB_INITTED)) + return; + + if (ppd->hol_state != QIB_HOL_UP) { + /* + * Try to flush sends in case a stuck packet is blocking + * SMP replies. + */ + qib_hol_down(ppd); + mod_timer(&ppd->hol_timer, + jiffies + msecs_to_jiffies(qib_hol_timeout_ms)); + } +} |