summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/r852.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/raw/r852.c')
-rw-r--r--drivers/mtd/nand/raw/r852.c1093
1 files changed, 1093 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/r852.c b/drivers/mtd/nand/raw/r852.c
new file mode 100644
index 000000000..c742354c1
--- /dev/null
+++ b/drivers/mtd/nand/raw/r852.c
@@ -0,0 +1,1093 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright © 2009 - Maxim Levitsky
+ * driver for Ricoh xD readers
+ */
+
+#define DRV_NAME "r852"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <asm/byteorder.h>
+#include <linux/sched.h>
+#include "sm_common.h"
+#include "r852.h"
+
+
+static bool r852_enable_dma = 1;
+module_param(r852_enable_dma, bool, S_IRUGO);
+MODULE_PARM_DESC(r852_enable_dma, "Enable usage of the DMA (default)");
+
+static int debug;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
+
+/* read register */
+static inline uint8_t r852_read_reg(struct r852_device *dev, int address)
+{
+ uint8_t reg = readb(dev->mmio + address);
+ return reg;
+}
+
+/* write register */
+static inline void r852_write_reg(struct r852_device *dev,
+ int address, uint8_t value)
+{
+ writeb(value, dev->mmio + address);
+}
+
+
+/* read dword sized register */
+static inline uint32_t r852_read_reg_dword(struct r852_device *dev, int address)
+{
+ uint32_t reg = le32_to_cpu(readl(dev->mmio + address));
+ return reg;
+}
+
+/* write dword sized register */
+static inline void r852_write_reg_dword(struct r852_device *dev,
+ int address, uint32_t value)
+{
+ writel(cpu_to_le32(value), dev->mmio + address);
+}
+
+/* returns pointer to our private structure */
+static inline struct r852_device *r852_get_dev(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ return nand_get_controller_data(chip);
+}
+
+
+/* check if controller supports dma */
+static void r852_dma_test(struct r852_device *dev)
+{
+ dev->dma_usable = (r852_read_reg(dev, R852_DMA_CAP) &
+ (R852_DMA1 | R852_DMA2)) == (R852_DMA1 | R852_DMA2);
+
+ if (!dev->dma_usable)
+ message("Non dma capable device detected, dma disabled");
+
+ if (!r852_enable_dma) {
+ message("disabling dma on user request");
+ dev->dma_usable = 0;
+ }
+}
+
+/*
+ * Enable dma. Enables ether first or second stage of the DMA,
+ * Expects dev->dma_dir and dev->dma_state be set
+ */
+static void r852_dma_enable(struct r852_device *dev)
+{
+ uint8_t dma_reg, dma_irq_reg;
+
+ /* Set up dma settings */
+ dma_reg = r852_read_reg_dword(dev, R852_DMA_SETTINGS);
+ dma_reg &= ~(R852_DMA_READ | R852_DMA_INTERNAL | R852_DMA_MEMORY);
+
+ if (dev->dma_dir)
+ dma_reg |= R852_DMA_READ;
+
+ if (dev->dma_state == DMA_INTERNAL) {
+ dma_reg |= R852_DMA_INTERNAL;
+ /* Precaution to make sure HW doesn't write */
+ /* to random kernel memory */
+ r852_write_reg_dword(dev, R852_DMA_ADDR,
+ cpu_to_le32(dev->phys_bounce_buffer));
+ } else {
+ dma_reg |= R852_DMA_MEMORY;
+ r852_write_reg_dword(dev, R852_DMA_ADDR,
+ cpu_to_le32(dev->phys_dma_addr));
+ }
+
+ /* Precaution: make sure write reached the device */
+ r852_read_reg_dword(dev, R852_DMA_ADDR);
+
+ r852_write_reg_dword(dev, R852_DMA_SETTINGS, dma_reg);
+
+ /* Set dma irq */
+ dma_irq_reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE,
+ dma_irq_reg |
+ R852_DMA_IRQ_INTERNAL |
+ R852_DMA_IRQ_ERROR |
+ R852_DMA_IRQ_MEMORY);
+}
+
+/*
+ * Disable dma, called from the interrupt handler, which specifies
+ * success of the operation via 'error' argument
+ */
+static void r852_dma_done(struct r852_device *dev, int error)
+{
+ WARN_ON(dev->dma_stage == 0);
+
+ r852_write_reg_dword(dev, R852_DMA_IRQ_STA,
+ r852_read_reg_dword(dev, R852_DMA_IRQ_STA));
+
+ r852_write_reg_dword(dev, R852_DMA_SETTINGS, 0);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE, 0);
+
+ /* Precaution to make sure HW doesn't write to random kernel memory */
+ r852_write_reg_dword(dev, R852_DMA_ADDR,
+ cpu_to_le32(dev->phys_bounce_buffer));
+ r852_read_reg_dword(dev, R852_DMA_ADDR);
+
+ dev->dma_error = error;
+ dev->dma_stage = 0;
+
+ if (dev->phys_dma_addr && dev->phys_dma_addr != dev->phys_bounce_buffer)
+ dma_unmap_single(&dev->pci_dev->dev, dev->phys_dma_addr,
+ R852_DMA_LEN,
+ dev->dma_dir ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+
+/*
+ * Wait, till dma is done, which includes both phases of it
+ */
+static int r852_dma_wait(struct r852_device *dev)
+{
+ long timeout = wait_for_completion_timeout(&dev->dma_done,
+ msecs_to_jiffies(1000));
+ if (!timeout) {
+ dbg("timeout waiting for DMA interrupt");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/*
+ * Read/Write one page using dma. Only pages can be read (512 bytes)
+*/
+static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
+{
+ int bounce = 0;
+ unsigned long flags;
+ int error;
+
+ dev->dma_error = 0;
+
+ /* Set dma direction */
+ dev->dma_dir = do_read;
+ dev->dma_stage = 1;
+ reinit_completion(&dev->dma_done);
+
+ dbg_verbose("doing dma %s ", do_read ? "read" : "write");
+
+ /* Set initial dma state: for reading first fill on board buffer,
+ from device, for writes first fill the buffer from memory*/
+ dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY;
+
+ /* if incoming buffer is not page aligned, we should do bounce */
+ if ((unsigned long)buf & (R852_DMA_LEN-1))
+ bounce = 1;
+
+ if (!bounce) {
+ dev->phys_dma_addr = dma_map_single(&dev->pci_dev->dev, buf,
+ R852_DMA_LEN,
+ do_read ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ if (dma_mapping_error(&dev->pci_dev->dev, dev->phys_dma_addr))
+ bounce = 1;
+ }
+
+ if (bounce) {
+ dbg_verbose("dma: using bounce buffer");
+ dev->phys_dma_addr = dev->phys_bounce_buffer;
+ if (!do_read)
+ memcpy(dev->bounce_buffer, buf, R852_DMA_LEN);
+ }
+
+ /* Enable DMA */
+ spin_lock_irqsave(&dev->irqlock, flags);
+ r852_dma_enable(dev);
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+
+ /* Wait till complete */
+ error = r852_dma_wait(dev);
+
+ if (error) {
+ r852_dma_done(dev, error);
+ return;
+ }
+
+ if (do_read && bounce)
+ memcpy((void *)buf, dev->bounce_buffer, R852_DMA_LEN);
+}
+
+/*
+ * Program data lines of the nand chip to send data to it
+ */
+static void r852_write_buf(struct nand_chip *chip, const uint8_t *buf, int len)
+{
+ struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
+ uint32_t reg;
+
+ /* Don't allow any access to hardware if we suspect card removal */
+ if (dev->card_unstable)
+ return;
+
+ /* Special case for whole sector read */
+ if (len == R852_DMA_LEN && dev->dma_usable) {
+ r852_do_dma(dev, (uint8_t *)buf, 0);
+ return;
+ }
+
+ /* write DWORD chinks - faster */
+ while (len >= 4) {
+ reg = buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24;
+ r852_write_reg_dword(dev, R852_DATALINE, reg);
+ buf += 4;
+ len -= 4;
+
+ }
+
+ /* write rest */
+ while (len > 0) {
+ r852_write_reg(dev, R852_DATALINE, *buf++);
+ len--;
+ }
+}
+
+/*
+ * Read data lines of the nand chip to retrieve data
+ */
+static void r852_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
+{
+ struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
+ uint32_t reg;
+
+ if (dev->card_unstable) {
+ /* since we can't signal error here, at least, return
+ predictable buffer */
+ memset(buf, 0, len);
+ return;
+ }
+
+ /* special case for whole sector read */
+ if (len == R852_DMA_LEN && dev->dma_usable) {
+ r852_do_dma(dev, buf, 1);
+ return;
+ }
+
+ /* read in dword sized chunks */
+ while (len >= 4) {
+
+ reg = r852_read_reg_dword(dev, R852_DATALINE);
+ *buf++ = reg & 0xFF;
+ *buf++ = (reg >> 8) & 0xFF;
+ *buf++ = (reg >> 16) & 0xFF;
+ *buf++ = (reg >> 24) & 0xFF;
+ len -= 4;
+ }
+
+ /* read the reset by bytes */
+ while (len--)
+ *buf++ = r852_read_reg(dev, R852_DATALINE);
+}
+
+/*
+ * Read one byte from nand chip
+ */
+static uint8_t r852_read_byte(struct nand_chip *chip)
+{
+ struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
+
+ /* Same problem as in r852_read_buf.... */
+ if (dev->card_unstable)
+ return 0;
+
+ return r852_read_reg(dev, R852_DATALINE);
+}
+
+/*
+ * Control several chip lines & send commands
+ */
+static void r852_cmdctl(struct nand_chip *chip, int dat, unsigned int ctrl)
+{
+ struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
+
+ if (dev->card_unstable)
+ return;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+
+ dev->ctlreg &= ~(R852_CTL_DATA | R852_CTL_COMMAND |
+ R852_CTL_ON | R852_CTL_CARDENABLE);
+
+ if (ctrl & NAND_ALE)
+ dev->ctlreg |= R852_CTL_DATA;
+
+ if (ctrl & NAND_CLE)
+ dev->ctlreg |= R852_CTL_COMMAND;
+
+ if (ctrl & NAND_NCE)
+ dev->ctlreg |= (R852_CTL_CARDENABLE | R852_CTL_ON);
+ else
+ dev->ctlreg &= ~R852_CTL_WRITE;
+
+ /* when write is stareted, enable write access */
+ if (dat == NAND_CMD_ERASE1)
+ dev->ctlreg |= R852_CTL_WRITE;
+
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ }
+
+ /* HACK: NAND_CMD_SEQIN is called without NAND_CTRL_CHANGE, but we need
+ to set write mode */
+ if (dat == NAND_CMD_SEQIN && (dev->ctlreg & R852_CTL_COMMAND)) {
+ dev->ctlreg |= R852_CTL_WRITE;
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ }
+
+ if (dat != NAND_CMD_NONE)
+ r852_write_reg(dev, R852_DATALINE, dat);
+}
+
+/*
+ * Wait till card is ready.
+ * based on nand_wait, but returns errors on DMA error
+ */
+static int r852_wait(struct nand_chip *chip)
+{
+ struct r852_device *dev = nand_get_controller_data(chip);
+
+ unsigned long timeout;
+ u8 status;
+
+ timeout = jiffies + msecs_to_jiffies(400);
+
+ while (time_before(jiffies, timeout))
+ if (chip->legacy.dev_ready(chip))
+ break;
+
+ nand_status_op(chip, &status);
+
+ /* Unfortunelly, no way to send detailed error status... */
+ if (dev->dma_error) {
+ status |= NAND_STATUS_FAIL;
+ dev->dma_error = 0;
+ }
+ return status;
+}
+
+/*
+ * Check if card is ready
+ */
+
+static int r852_ready(struct nand_chip *chip)
+{
+ struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
+ return !(r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_BUSY);
+}
+
+
+/*
+ * Set ECC engine mode
+*/
+
+static void r852_ecc_hwctl(struct nand_chip *chip, int mode)
+{
+ struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
+
+ if (dev->card_unstable)
+ return;
+
+ switch (mode) {
+ case NAND_ECC_READ:
+ case NAND_ECC_WRITE:
+ /* enable ecc generation/check*/
+ dev->ctlreg |= R852_CTL_ECC_ENABLE;
+
+ /* flush ecc buffer */
+ r852_write_reg(dev, R852_CTL,
+ dev->ctlreg | R852_CTL_ECC_ACCESS);
+
+ r852_read_reg_dword(dev, R852_DATALINE);
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ return;
+
+ case NAND_ECC_READSYN:
+ /* disable ecc generation */
+ dev->ctlreg &= ~R852_CTL_ECC_ENABLE;
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ }
+}
+
+/*
+ * Calculate ECC, only used for writes
+ */
+
+static int r852_ecc_calculate(struct nand_chip *chip, const uint8_t *dat,
+ uint8_t *ecc_code)
+{
+ struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
+ struct sm_oob *oob = (struct sm_oob *)ecc_code;
+ uint32_t ecc1, ecc2;
+
+ if (dev->card_unstable)
+ return 0;
+
+ dev->ctlreg &= ~R852_CTL_ECC_ENABLE;
+ r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
+
+ ecc1 = r852_read_reg_dword(dev, R852_DATALINE);
+ ecc2 = r852_read_reg_dword(dev, R852_DATALINE);
+
+ oob->ecc1[0] = (ecc1) & 0xFF;
+ oob->ecc1[1] = (ecc1 >> 8) & 0xFF;
+ oob->ecc1[2] = (ecc1 >> 16) & 0xFF;
+
+ oob->ecc2[0] = (ecc2) & 0xFF;
+ oob->ecc2[1] = (ecc2 >> 8) & 0xFF;
+ oob->ecc2[2] = (ecc2 >> 16) & 0xFF;
+
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ return 0;
+}
+
+/*
+ * Correct the data using ECC, hw did almost everything for us
+ */
+
+static int r852_ecc_correct(struct nand_chip *chip, uint8_t *dat,
+ uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+ uint32_t ecc_reg;
+ uint8_t ecc_status, err_byte;
+ int i, error = 0;
+
+ struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
+
+ if (dev->card_unstable)
+ return 0;
+
+ if (dev->dma_error) {
+ dev->dma_error = 0;
+ return -EIO;
+ }
+
+ r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
+ ecc_reg = r852_read_reg_dword(dev, R852_DATALINE);
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+
+ for (i = 0 ; i <= 1 ; i++) {
+
+ ecc_status = (ecc_reg >> 8) & 0xFF;
+
+ /* ecc uncorrectable error */
+ if (ecc_status & R852_ECC_FAIL) {
+ dbg("ecc: unrecoverable error, in half %d", i);
+ error = -EBADMSG;
+ goto exit;
+ }
+
+ /* correctable error */
+ if (ecc_status & R852_ECC_CORRECTABLE) {
+
+ err_byte = ecc_reg & 0xFF;
+ dbg("ecc: recoverable error, "
+ "in half %d, byte %d, bit %d", i,
+ err_byte, ecc_status & R852_ECC_ERR_BIT_MSK);
+
+ dat[err_byte] ^=
+ 1 << (ecc_status & R852_ECC_ERR_BIT_MSK);
+ error++;
+ }
+
+ dat += 256;
+ ecc_reg >>= 16;
+ }
+exit:
+ return error;
+}
+
+/*
+ * This is copy of nand_read_oob_std
+ * nand_read_oob_syndrome assumes we can send column address - we can't
+ */
+static int r852_read_oob(struct nand_chip *chip, int page)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+
+ return nand_read_oob_op(chip, page, 0, chip->oob_poi, mtd->oobsize);
+}
+
+/*
+ * Start the nand engine
+ */
+
+static void r852_engine_enable(struct r852_device *dev)
+{
+ if (r852_read_reg_dword(dev, R852_HW) & R852_HW_UNKNOWN) {
+ r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
+ r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED);
+ } else {
+ r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED);
+ r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
+ }
+ msleep(300);
+ r852_write_reg(dev, R852_CTL, 0);
+}
+
+
+/*
+ * Stop the nand engine
+ */
+
+static void r852_engine_disable(struct r852_device *dev)
+{
+ r852_write_reg_dword(dev, R852_HW, 0);
+ r852_write_reg(dev, R852_CTL, R852_CTL_RESET);
+}
+
+/*
+ * Test if card is present
+ */
+
+static void r852_card_update_present(struct r852_device *dev)
+{
+ unsigned long flags;
+ uint8_t reg;
+
+ spin_lock_irqsave(&dev->irqlock, flags);
+ reg = r852_read_reg(dev, R852_CARD_STA);
+ dev->card_detected = !!(reg & R852_CARD_STA_PRESENT);
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+}
+
+/*
+ * Update card detection IRQ state according to current card state
+ * which is read in r852_card_update_present
+ */
+static void r852_update_card_detect(struct r852_device *dev)
+{
+ int card_detect_reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
+ dev->card_unstable = 0;
+
+ card_detect_reg &= ~(R852_CARD_IRQ_REMOVE | R852_CARD_IRQ_INSERT);
+ card_detect_reg |= R852_CARD_IRQ_GENABLE;
+
+ card_detect_reg |= dev->card_detected ?
+ R852_CARD_IRQ_REMOVE : R852_CARD_IRQ_INSERT;
+
+ r852_write_reg(dev, R852_CARD_IRQ_ENABLE, card_detect_reg);
+}
+
+static ssize_t r852_media_type_show(struct device *sys_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mtd_info *mtd = container_of(sys_dev, struct mtd_info, dev);
+ struct r852_device *dev = r852_get_dev(mtd);
+ char *data = dev->sm ? "smartmedia" : "xd";
+
+ strcpy(buf, data);
+ return strlen(data);
+}
+
+static DEVICE_ATTR(media_type, S_IRUGO, r852_media_type_show, NULL);
+
+
+/* Detect properties of card in slot */
+static void r852_update_media_status(struct r852_device *dev)
+{
+ uint8_t reg;
+ unsigned long flags;
+ int readonly;
+
+ spin_lock_irqsave(&dev->irqlock, flags);
+ if (!dev->card_detected) {
+ message("card removed");
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+ return ;
+ }
+
+ readonly = r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_RO;
+ reg = r852_read_reg(dev, R852_DMA_CAP);
+ dev->sm = (reg & (R852_DMA1 | R852_DMA2)) && (reg & R852_SMBIT);
+
+ message("detected %s %s card in slot",
+ dev->sm ? "SmartMedia" : "xD",
+ readonly ? "readonly" : "writeable");
+
+ dev->readonly = readonly;
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+}
+
+/*
+ * Register the nand device
+ * Called when the card is detected
+ */
+static int r852_register_nand_device(struct r852_device *dev)
+{
+ struct mtd_info *mtd = nand_to_mtd(dev->chip);
+
+ WARN_ON(dev->card_registered);
+
+ mtd->dev.parent = &dev->pci_dev->dev;
+
+ if (dev->readonly)
+ dev->chip->options |= NAND_ROM;
+
+ r852_engine_enable(dev);
+
+ if (sm_register_device(mtd, dev->sm))
+ goto error1;
+
+ if (device_create_file(&mtd->dev, &dev_attr_media_type)) {
+ message("can't create media type sysfs attribute");
+ goto error3;
+ }
+
+ dev->card_registered = 1;
+ return 0;
+error3:
+ WARN_ON(mtd_device_unregister(nand_to_mtd(dev->chip)));
+ nand_cleanup(dev->chip);
+error1:
+ /* Force card redetect */
+ dev->card_detected = 0;
+ return -1;
+}
+
+/*
+ * Unregister the card
+ */
+
+static void r852_unregister_nand_device(struct r852_device *dev)
+{
+ struct mtd_info *mtd = nand_to_mtd(dev->chip);
+
+ if (!dev->card_registered)
+ return;
+
+ device_remove_file(&mtd->dev, &dev_attr_media_type);
+ WARN_ON(mtd_device_unregister(mtd));
+ nand_cleanup(dev->chip);
+ r852_engine_disable(dev);
+ dev->card_registered = 0;
+}
+
+/* Card state updater */
+static void r852_card_detect_work(struct work_struct *work)
+{
+ struct r852_device *dev =
+ container_of(work, struct r852_device, card_detect_work.work);
+
+ r852_card_update_present(dev);
+ r852_update_card_detect(dev);
+ dev->card_unstable = 0;
+
+ /* False alarm */
+ if (dev->card_detected == dev->card_registered)
+ goto exit;
+
+ /* Read media properties */
+ r852_update_media_status(dev);
+
+ /* Register the card */
+ if (dev->card_detected)
+ r852_register_nand_device(dev);
+ else
+ r852_unregister_nand_device(dev);
+exit:
+ r852_update_card_detect(dev);
+}
+
+/* Ack + disable IRQ generation */
+static void r852_disable_irqs(struct r852_device *dev)
+{
+ uint8_t reg;
+ reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
+ r852_write_reg(dev, R852_CARD_IRQ_ENABLE, reg & ~R852_CARD_IRQ_MASK);
+
+ reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE,
+ reg & ~R852_DMA_IRQ_MASK);
+
+ r852_write_reg(dev, R852_CARD_IRQ_STA, R852_CARD_IRQ_MASK);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_STA, R852_DMA_IRQ_MASK);
+}
+
+/* Interrupt handler */
+static irqreturn_t r852_irq(int irq, void *data)
+{
+ struct r852_device *dev = (struct r852_device *)data;
+
+ uint8_t card_status, dma_status;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+
+ spin_lock_irqsave(&dev->irqlock, flags);
+
+ /* handle card detection interrupts first */
+ card_status = r852_read_reg(dev, R852_CARD_IRQ_STA);
+ r852_write_reg(dev, R852_CARD_IRQ_STA, card_status);
+
+ if (card_status & (R852_CARD_IRQ_INSERT|R852_CARD_IRQ_REMOVE)) {
+
+ ret = IRQ_HANDLED;
+ dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);
+
+ /* we shouldn't receive any interrupts if we wait for card
+ to settle */
+ WARN_ON(dev->card_unstable);
+
+ /* disable irqs while card is unstable */
+ /* this will timeout DMA if active, but better that garbage */
+ r852_disable_irqs(dev);
+
+ if (dev->card_unstable)
+ goto out;
+
+ /* let, card state to settle a bit, and then do the work */
+ dev->card_unstable = 1;
+ queue_delayed_work(dev->card_workqueue,
+ &dev->card_detect_work, msecs_to_jiffies(100));
+ goto out;
+ }
+
+
+ /* Handle dma interrupts */
+ dma_status = r852_read_reg_dword(dev, R852_DMA_IRQ_STA);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_STA, dma_status);
+
+ if (dma_status & R852_DMA_IRQ_MASK) {
+
+ ret = IRQ_HANDLED;
+
+ if (dma_status & R852_DMA_IRQ_ERROR) {
+ dbg("received dma error IRQ");
+ r852_dma_done(dev, -EIO);
+ complete(&dev->dma_done);
+ goto out;
+ }
+
+ /* received DMA interrupt out of nowhere? */
+ WARN_ON_ONCE(dev->dma_stage == 0);
+
+ if (dev->dma_stage == 0)
+ goto out;
+
+ /* done device access */
+ if (dev->dma_state == DMA_INTERNAL &&
+ (dma_status & R852_DMA_IRQ_INTERNAL)) {
+
+ dev->dma_state = DMA_MEMORY;
+ dev->dma_stage++;
+ }
+
+ /* done memory DMA */
+ if (dev->dma_state == DMA_MEMORY &&
+ (dma_status & R852_DMA_IRQ_MEMORY)) {
+ dev->dma_state = DMA_INTERNAL;
+ dev->dma_stage++;
+ }
+
+ /* Enable 2nd half of dma dance */
+ if (dev->dma_stage == 2)
+ r852_dma_enable(dev);
+
+ /* Operation done */
+ if (dev->dma_stage == 3) {
+ r852_dma_done(dev, 0);
+ complete(&dev->dma_done);
+ }
+ goto out;
+ }
+
+ /* Handle unknown interrupts */
+ if (dma_status)
+ dbg("bad dma IRQ status = %x", dma_status);
+
+ if (card_status & ~R852_CARD_STA_CD)
+ dbg("strange card status = %x", card_status);
+
+out:
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+ return ret;
+}
+
+static int r852_attach_chip(struct nand_chip *chip)
+{
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
+ return 0;
+
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
+ chip->ecc.size = R852_DMA_LEN;
+ chip->ecc.bytes = SM_OOB_SIZE;
+ chip->ecc.strength = 2;
+ chip->ecc.hwctl = r852_ecc_hwctl;
+ chip->ecc.calculate = r852_ecc_calculate;
+ chip->ecc.correct = r852_ecc_correct;
+
+ /* TODO: hack */
+ chip->ecc.read_oob = r852_read_oob;
+
+ return 0;
+}
+
+static const struct nand_controller_ops r852_ops = {
+ .attach_chip = r852_attach_chip,
+};
+
+static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
+{
+ int error;
+ struct nand_chip *chip;
+ struct r852_device *dev;
+
+ /* pci initialization */
+ error = pci_enable_device(pci_dev);
+
+ if (error)
+ goto error1;
+
+ pci_set_master(pci_dev);
+
+ error = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32));
+ if (error)
+ goto error2;
+
+ error = pci_request_regions(pci_dev, DRV_NAME);
+
+ if (error)
+ goto error3;
+
+ error = -ENOMEM;
+
+ /* init nand chip, but register it only on card insert */
+ chip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
+
+ if (!chip)
+ goto error4;
+
+ /* commands */
+ chip->legacy.cmd_ctrl = r852_cmdctl;
+ chip->legacy.waitfunc = r852_wait;
+ chip->legacy.dev_ready = r852_ready;
+
+ /* I/O */
+ chip->legacy.read_byte = r852_read_byte;
+ chip->legacy.read_buf = r852_read_buf;
+ chip->legacy.write_buf = r852_write_buf;
+
+ /* init our device structure */
+ dev = kzalloc(sizeof(struct r852_device), GFP_KERNEL);
+
+ if (!dev)
+ goto error5;
+
+ nand_set_controller_data(chip, dev);
+ dev->chip = chip;
+ dev->pci_dev = pci_dev;
+ pci_set_drvdata(pci_dev, dev);
+
+ nand_controller_init(&dev->controller);
+ dev->controller.ops = &r852_ops;
+ chip->controller = &dev->controller;
+
+ dev->bounce_buffer = dma_alloc_coherent(&pci_dev->dev, R852_DMA_LEN,
+ &dev->phys_bounce_buffer, GFP_KERNEL);
+
+ if (!dev->bounce_buffer)
+ goto error6;
+
+
+ error = -ENODEV;
+ dev->mmio = pci_ioremap_bar(pci_dev, 0);
+
+ if (!dev->mmio)
+ goto error7;
+
+ error = -ENOMEM;
+ dev->tmp_buffer = kzalloc(SM_SECTOR_SIZE, GFP_KERNEL);
+
+ if (!dev->tmp_buffer)
+ goto error8;
+
+ init_completion(&dev->dma_done);
+
+ dev->card_workqueue = create_freezable_workqueue(DRV_NAME);
+
+ if (!dev->card_workqueue)
+ goto error9;
+
+ INIT_DELAYED_WORK(&dev->card_detect_work, r852_card_detect_work);
+
+ /* shutdown everything - precation */
+ r852_engine_disable(dev);
+ r852_disable_irqs(dev);
+
+ r852_dma_test(dev);
+
+ dev->irq = pci_dev->irq;
+ spin_lock_init(&dev->irqlock);
+
+ dev->card_detected = 0;
+ r852_card_update_present(dev);
+
+ /*register irq handler*/
+ error = -ENODEV;
+ if (request_irq(pci_dev->irq, &r852_irq, IRQF_SHARED,
+ DRV_NAME, dev))
+ goto error10;
+
+ /* kick initial present test */
+ queue_delayed_work(dev->card_workqueue,
+ &dev->card_detect_work, 0);
+
+
+ pr_notice("driver loaded successfully\n");
+ return 0;
+
+error10:
+ destroy_workqueue(dev->card_workqueue);
+error9:
+ kfree(dev->tmp_buffer);
+error8:
+ pci_iounmap(pci_dev, dev->mmio);
+error7:
+ dma_free_coherent(&pci_dev->dev, R852_DMA_LEN, dev->bounce_buffer,
+ dev->phys_bounce_buffer);
+error6:
+ kfree(dev);
+error5:
+ kfree(chip);
+error4:
+ pci_release_regions(pci_dev);
+error3:
+error2:
+ pci_disable_device(pci_dev);
+error1:
+ return error;
+}
+
+static void r852_remove(struct pci_dev *pci_dev)
+{
+ struct r852_device *dev = pci_get_drvdata(pci_dev);
+
+ /* Stop detect workqueue -
+ we are going to unregister the device anyway*/
+ cancel_delayed_work_sync(&dev->card_detect_work);
+ destroy_workqueue(dev->card_workqueue);
+
+ /* Unregister the device, this might make more IO */
+ r852_unregister_nand_device(dev);
+
+ /* Stop interrupts */
+ r852_disable_irqs(dev);
+ free_irq(dev->irq, dev);
+
+ /* Cleanup */
+ kfree(dev->tmp_buffer);
+ pci_iounmap(pci_dev, dev->mmio);
+ dma_free_coherent(&pci_dev->dev, R852_DMA_LEN, dev->bounce_buffer,
+ dev->phys_bounce_buffer);
+
+ kfree(dev->chip);
+ kfree(dev);
+
+ /* Shutdown the PCI device */
+ pci_release_regions(pci_dev);
+ pci_disable_device(pci_dev);
+}
+
+static void r852_shutdown(struct pci_dev *pci_dev)
+{
+ struct r852_device *dev = pci_get_drvdata(pci_dev);
+
+ cancel_delayed_work_sync(&dev->card_detect_work);
+ r852_disable_irqs(dev);
+ synchronize_irq(dev->irq);
+ pci_disable_device(pci_dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int r852_suspend(struct device *device)
+{
+ struct r852_device *dev = dev_get_drvdata(device);
+
+ if (dev->ctlreg & R852_CTL_CARDENABLE)
+ return -EBUSY;
+
+ /* First make sure the detect work is gone */
+ cancel_delayed_work_sync(&dev->card_detect_work);
+
+ /* Turn off the interrupts and stop the device */
+ r852_disable_irqs(dev);
+ r852_engine_disable(dev);
+
+ /* If card was pulled off just during the suspend, which is very
+ unlikely, we will remove it on resume, it too late now
+ anyway... */
+ dev->card_unstable = 0;
+ return 0;
+}
+
+static int r852_resume(struct device *device)
+{
+ struct r852_device *dev = dev_get_drvdata(device);
+
+ r852_disable_irqs(dev);
+ r852_card_update_present(dev);
+ r852_engine_disable(dev);
+
+
+ /* If card status changed, just do the work */
+ if (dev->card_detected != dev->card_registered) {
+ dbg("card was %s during low power state",
+ dev->card_detected ? "added" : "removed");
+
+ queue_delayed_work(dev->card_workqueue,
+ &dev->card_detect_work, msecs_to_jiffies(1000));
+ return 0;
+ }
+
+ /* Otherwise, initialize the card */
+ if (dev->card_registered) {
+ r852_engine_enable(dev);
+ nand_select_target(dev->chip, 0);
+ nand_reset_op(dev->chip);
+ nand_deselect_target(dev->chip);
+ }
+
+ /* Program card detection IRQ */
+ r852_update_card_detect(dev);
+ return 0;
+}
+#endif
+
+static const struct pci_device_id r852_pci_id_tbl[] = {
+
+ { PCI_VDEVICE(RICOH, 0x0852), },
+ { },
+};
+
+MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
+
+static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
+
+static struct pci_driver r852_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = r852_pci_id_tbl,
+ .probe = r852_probe,
+ .remove = r852_remove,
+ .shutdown = r852_shutdown,
+ .driver.pm = &r852_pm_ops,
+};
+
+module_pci_driver(r852_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
+MODULE_DESCRIPTION("Ricoh 85xx xD/smartmedia card reader driver");