diff options
Diffstat (limited to 'drivers/net/ethernet/sfc/efx_common.c')
| -rw-r--r-- | drivers/net/ethernet/sfc/efx_common.c | 1395 |
1 files changed, 1395 insertions, 0 deletions
diff --git a/drivers/net/ethernet/sfc/efx_common.c b/drivers/net/ethernet/sfc/efx_common.c new file mode 100644 index 000000000..476ef1c97 --- /dev/null +++ b/drivers/net/ethernet/sfc/efx_common.c @@ -0,0 +1,1395 @@ +// SPDX-License-Identifier: GPL-2.0-only +/**************************************************************************** + * Driver for Solarflare network controllers and boards + * Copyright 2018 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include "net_driver.h" +#include <linux/module.h> +#include <linux/netdevice.h> +#include <net/gre.h> +#include "efx_common.h" +#include "efx_channels.h" +#include "efx.h" +#include "mcdi.h" +#include "selftest.h" +#include "rx_common.h" +#include "tx_common.h" +#include "nic.h" +#include "mcdi_port_common.h" +#include "io.h" +#include "mcdi_pcol.h" + +static unsigned int debug = (NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_IFDOWN | + NETIF_MSG_IFUP | NETIF_MSG_RX_ERR | + NETIF_MSG_TX_ERR | NETIF_MSG_HW); +module_param(debug, uint, 0); +MODULE_PARM_DESC(debug, "Bitmapped debugging message enable value"); + +/* This is the time (in jiffies) between invocations of the hardware + * monitor. + * On Falcon-based NICs, this will: + * - Check the on-board hardware monitor; + * - Poll the link state and reconfigure the hardware as necessary. + * On Siena-based NICs for power systems with EEH support, this will give EEH a + * chance to start. + */ +static unsigned int efx_monitor_interval = 1 * HZ; + +/* How often and how many times to poll for a reset while waiting for a + * BIST that another function started to complete. + */ +#define BIST_WAIT_DELAY_MS 100 +#define BIST_WAIT_DELAY_COUNT 100 + +/* Default stats update time */ +#define STATS_PERIOD_MS_DEFAULT 1000 + +const unsigned int efx_reset_type_max = RESET_TYPE_MAX; +const char *const efx_reset_type_names[] = { + [RESET_TYPE_INVISIBLE] = "INVISIBLE", + [RESET_TYPE_ALL] = "ALL", + [RESET_TYPE_RECOVER_OR_ALL] = "RECOVER_OR_ALL", + [RESET_TYPE_WORLD] = "WORLD", + [RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE", + [RESET_TYPE_DATAPATH] = "DATAPATH", + [RESET_TYPE_MC_BIST] = "MC_BIST", + [RESET_TYPE_DISABLE] = "DISABLE", + [RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG", + [RESET_TYPE_INT_ERROR] = "INT_ERROR", + [RESET_TYPE_DMA_ERROR] = "DMA_ERROR", + [RESET_TYPE_TX_SKIP] = "TX_SKIP", + [RESET_TYPE_MC_FAILURE] = "MC_FAILURE", + [RESET_TYPE_MCDI_TIMEOUT] = "MCDI_TIMEOUT (FLR)", +}; + +#define RESET_TYPE(type) \ + STRING_TABLE_LOOKUP(type, efx_reset_type) + +/* Loopback mode names (see LOOPBACK_MODE()) */ +const unsigned int efx_loopback_mode_max = LOOPBACK_MAX; +const char *const efx_loopback_mode_names[] = { + [LOOPBACK_NONE] = "NONE", + [LOOPBACK_DATA] = "DATAPATH", + [LOOPBACK_GMAC] = "GMAC", + [LOOPBACK_XGMII] = "XGMII", + [LOOPBACK_XGXS] = "XGXS", + [LOOPBACK_XAUI] = "XAUI", + [LOOPBACK_GMII] = "GMII", + [LOOPBACK_SGMII] = "SGMII", + [LOOPBACK_XGBR] = "XGBR", + [LOOPBACK_XFI] = "XFI", + [LOOPBACK_XAUI_FAR] = "XAUI_FAR", + [LOOPBACK_GMII_FAR] = "GMII_FAR", + [LOOPBACK_SGMII_FAR] = "SGMII_FAR", + [LOOPBACK_XFI_FAR] = "XFI_FAR", + [LOOPBACK_GPHY] = "GPHY", + [LOOPBACK_PHYXS] = "PHYXS", + [LOOPBACK_PCS] = "PCS", + [LOOPBACK_PMAPMD] = "PMA/PMD", + [LOOPBACK_XPORT] = "XPORT", + [LOOPBACK_XGMII_WS] = "XGMII_WS", + [LOOPBACK_XAUI_WS] = "XAUI_WS", + [LOOPBACK_XAUI_WS_FAR] = "XAUI_WS_FAR", + [LOOPBACK_XAUI_WS_NEAR] = "XAUI_WS_NEAR", + [LOOPBACK_GMII_WS] = "GMII_WS", + [LOOPBACK_XFI_WS] = "XFI_WS", + [LOOPBACK_XFI_WS_FAR] = "XFI_WS_FAR", + [LOOPBACK_PHYXS_WS] = "PHYXS_WS", +}; + +/* Reset workqueue. If any NIC has a hardware failure then a reset will be + * queued onto this work queue. This is not a per-nic work queue, because + * efx_reset_work() acquires the rtnl lock, so resets are naturally serialised. + */ +static struct workqueue_struct *reset_workqueue; + +int efx_create_reset_workqueue(void) +{ + reset_workqueue = create_singlethread_workqueue("sfc_reset"); + if (!reset_workqueue) { + printk(KERN_ERR "Failed to create reset workqueue\n"); + return -ENOMEM; + } + + return 0; +} + +void efx_queue_reset_work(struct efx_nic *efx) +{ + queue_work(reset_workqueue, &efx->reset_work); +} + +void efx_flush_reset_workqueue(struct efx_nic *efx) +{ + cancel_work_sync(&efx->reset_work); +} + +void efx_destroy_reset_workqueue(void) +{ + if (reset_workqueue) { + destroy_workqueue(reset_workqueue); + reset_workqueue = NULL; + } +} + +/* We assume that efx->type->reconfigure_mac will always try to sync RX + * filters and therefore needs to read-lock the filter table against freeing + */ +void efx_mac_reconfigure(struct efx_nic *efx, bool mtu_only) +{ + if (efx->type->reconfigure_mac) { + down_read(&efx->filter_sem); + efx->type->reconfigure_mac(efx, mtu_only); + up_read(&efx->filter_sem); + } +} + +/* Asynchronous work item for changing MAC promiscuity and multicast + * hash. Avoid a drain/rx_ingress enable by reconfiguring the current + * MAC directly. + */ +static void efx_mac_work(struct work_struct *data) +{ + struct efx_nic *efx = container_of(data, struct efx_nic, mac_work); + + mutex_lock(&efx->mac_lock); + if (efx->port_enabled) + efx_mac_reconfigure(efx, false); + mutex_unlock(&efx->mac_lock); +} + +int efx_set_mac_address(struct net_device *net_dev, void *data) +{ + struct efx_nic *efx = netdev_priv(net_dev); + struct sockaddr *addr = data; + u8 *new_addr = addr->sa_data; + u8 old_addr[6]; + int rc; + + if (!is_valid_ether_addr(new_addr)) { + netif_err(efx, drv, efx->net_dev, + "invalid ethernet MAC address requested: %pM\n", + new_addr); + return -EADDRNOTAVAIL; + } + + /* save old address */ + ether_addr_copy(old_addr, net_dev->dev_addr); + ether_addr_copy(net_dev->dev_addr, new_addr); + if (efx->type->set_mac_address) { + rc = efx->type->set_mac_address(efx); + if (rc) { + ether_addr_copy(net_dev->dev_addr, old_addr); + return rc; + } + } + + /* Reconfigure the MAC */ + mutex_lock(&efx->mac_lock); + efx_mac_reconfigure(efx, false); + mutex_unlock(&efx->mac_lock); + + return 0; +} + +/* Context: netif_addr_lock held, BHs disabled. */ +void efx_set_rx_mode(struct net_device *net_dev) +{ + struct efx_nic *efx = netdev_priv(net_dev); + + if (efx->port_enabled) + queue_work(efx->workqueue, &efx->mac_work); + /* Otherwise efx_start_port() will do this */ +} + +int efx_set_features(struct net_device *net_dev, netdev_features_t data) +{ + struct efx_nic *efx = netdev_priv(net_dev); + int rc; + + /* If disabling RX n-tuple filtering, clear existing filters */ + if (net_dev->features & ~data & NETIF_F_NTUPLE) { + rc = efx->type->filter_clear_rx(efx, EFX_FILTER_PRI_MANUAL); + if (rc) + return rc; + } + + /* If Rx VLAN filter is changed, update filters via mac_reconfigure. + * If rx-fcs is changed, mac_reconfigure updates that too. + */ + if ((net_dev->features ^ data) & (NETIF_F_HW_VLAN_CTAG_FILTER | + NETIF_F_RXFCS)) { + /* efx_set_rx_mode() will schedule MAC work to update filters + * when a new features are finally set in net_dev. + */ + efx_set_rx_mode(net_dev); + } + + return 0; +} + +/* This ensures that the kernel is kept informed (via + * netif_carrier_on/off) of the link status, and also maintains the + * link status's stop on the port's TX queue. + */ +void efx_link_status_changed(struct efx_nic *efx) +{ + struct efx_link_state *link_state = &efx->link_state; + + /* SFC Bug 5356: A net_dev notifier is registered, so we must ensure + * that no events are triggered between unregister_netdev() and the + * driver unloading. A more general condition is that NETDEV_CHANGE + * can only be generated between NETDEV_UP and NETDEV_DOWN + */ + if (!netif_running(efx->net_dev)) + return; + + if (link_state->up != netif_carrier_ok(efx->net_dev)) { + efx->n_link_state_changes++; + + if (link_state->up) + netif_carrier_on(efx->net_dev); + else + netif_carrier_off(efx->net_dev); + } + + /* Status message for kernel log */ + if (link_state->up) + netif_info(efx, link, efx->net_dev, + "link up at %uMbps %s-duplex (MTU %d)\n", + link_state->speed, link_state->fd ? "full" : "half", + efx->net_dev->mtu); + else + netif_info(efx, link, efx->net_dev, "link down\n"); +} + +unsigned int efx_xdp_max_mtu(struct efx_nic *efx) +{ + /* The maximum MTU that we can fit in a single page, allowing for + * framing, overhead and XDP headroom + tailroom. + */ + int overhead = EFX_MAX_FRAME_LEN(0) + sizeof(struct efx_rx_page_state) + + efx->rx_prefix_size + efx->type->rx_buffer_padding + + efx->rx_ip_align + EFX_XDP_HEADROOM + EFX_XDP_TAILROOM; + + return PAGE_SIZE - overhead; +} + +/* Context: process, rtnl_lock() held. */ +int efx_change_mtu(struct net_device *net_dev, int new_mtu) +{ + struct efx_nic *efx = netdev_priv(net_dev); + int rc; + + rc = efx_check_disabled(efx); + if (rc) + return rc; + + if (rtnl_dereference(efx->xdp_prog) && + new_mtu > efx_xdp_max_mtu(efx)) { + netif_err(efx, drv, efx->net_dev, + "Requested MTU of %d too big for XDP (max: %d)\n", + new_mtu, efx_xdp_max_mtu(efx)); + return -EINVAL; + } + + netif_dbg(efx, drv, efx->net_dev, "changing MTU to %d\n", new_mtu); + + efx_device_detach_sync(efx); + efx_stop_all(efx); + + mutex_lock(&efx->mac_lock); + net_dev->mtu = new_mtu; + efx_mac_reconfigure(efx, true); + mutex_unlock(&efx->mac_lock); + + efx_start_all(efx); + efx_device_attach_if_not_resetting(efx); + return 0; +} + +/************************************************************************** + * + * Hardware monitor + * + **************************************************************************/ + +/* Run periodically off the general workqueue */ +static void efx_monitor(struct work_struct *data) +{ + struct efx_nic *efx = container_of(data, struct efx_nic, + monitor_work.work); + + netif_vdbg(efx, timer, efx->net_dev, + "hardware monitor executing on CPU %d\n", + raw_smp_processor_id()); + BUG_ON(efx->type->monitor == NULL); + + /* If the mac_lock is already held then it is likely a port + * reconfiguration is already in place, which will likely do + * most of the work of monitor() anyway. + */ + if (mutex_trylock(&efx->mac_lock)) { + if (efx->port_enabled && efx->type->monitor) + efx->type->monitor(efx); + mutex_unlock(&efx->mac_lock); + } + + efx_start_monitor(efx); +} + +void efx_start_monitor(struct efx_nic *efx) +{ + if (efx->type->monitor) + queue_delayed_work(efx->workqueue, &efx->monitor_work, + efx_monitor_interval); +} + +/************************************************************************** + * + * Event queue processing + * + *************************************************************************/ + +/* Channels are shutdown and reinitialised whilst the NIC is running + * to propagate configuration changes (mtu, checksum offload), or + * to clear hardware error conditions + */ +static void efx_start_datapath(struct efx_nic *efx) +{ + netdev_features_t old_features = efx->net_dev->features; + bool old_rx_scatter = efx->rx_scatter; + size_t rx_buf_len; + + /* Calculate the rx buffer allocation parameters required to + * support the current MTU, including padding for header + * alignment and overruns. + */ + efx->rx_dma_len = (efx->rx_prefix_size + + EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + + efx->type->rx_buffer_padding); + rx_buf_len = (sizeof(struct efx_rx_page_state) + EFX_XDP_HEADROOM + + efx->rx_ip_align + efx->rx_dma_len + EFX_XDP_TAILROOM); + + if (rx_buf_len <= PAGE_SIZE) { + efx->rx_scatter = efx->type->always_rx_scatter; + efx->rx_buffer_order = 0; + } else if (efx->type->can_rx_scatter) { + BUILD_BUG_ON(EFX_RX_USR_BUF_SIZE % L1_CACHE_BYTES); + BUILD_BUG_ON(sizeof(struct efx_rx_page_state) + + 2 * ALIGN(NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE, + EFX_RX_BUF_ALIGNMENT) > + PAGE_SIZE); + efx->rx_scatter = true; + efx->rx_dma_len = EFX_RX_USR_BUF_SIZE; + efx->rx_buffer_order = 0; + } else { + efx->rx_scatter = false; + efx->rx_buffer_order = get_order(rx_buf_len); + } + + efx_rx_config_page_split(efx); + if (efx->rx_buffer_order) + netif_dbg(efx, drv, efx->net_dev, + "RX buf len=%u; page order=%u batch=%u\n", + efx->rx_dma_len, efx->rx_buffer_order, + efx->rx_pages_per_batch); + else + netif_dbg(efx, drv, efx->net_dev, + "RX buf len=%u step=%u bpp=%u; page batch=%u\n", + efx->rx_dma_len, efx->rx_page_buf_step, + efx->rx_bufs_per_page, efx->rx_pages_per_batch); + + /* Restore previously fixed features in hw_features and remove + * features which are fixed now + */ + efx->net_dev->hw_features |= efx->net_dev->features; + efx->net_dev->hw_features &= ~efx->fixed_features; + efx->net_dev->features |= efx->fixed_features; + if (efx->net_dev->features != old_features) + netdev_features_change(efx->net_dev); + + /* RX filters may also have scatter-enabled flags */ + if ((efx->rx_scatter != old_rx_scatter) && + efx->type->filter_update_rx_scatter) + efx->type->filter_update_rx_scatter(efx); + + /* We must keep at least one descriptor in a TX ring empty. + * We could avoid this when the queue size does not exactly + * match the hardware ring size, but it's not that important. + * Therefore we stop the queue when one more skb might fill + * the ring completely. We wake it when half way back to + * empty. + */ + efx->txq_stop_thresh = efx->txq_entries - efx_tx_max_skb_descs(efx); + efx->txq_wake_thresh = efx->txq_stop_thresh / 2; + + /* Initialise the channels */ + efx_start_channels(efx); + + efx_ptp_start_datapath(efx); + + if (netif_device_present(efx->net_dev)) + netif_tx_wake_all_queues(efx->net_dev); +} + +static void efx_stop_datapath(struct efx_nic *efx) +{ + EFX_ASSERT_RESET_SERIALISED(efx); + BUG_ON(efx->port_enabled); + + efx_ptp_stop_datapath(efx); + + efx_stop_channels(efx); +} + +/************************************************************************** + * + * Port handling + * + **************************************************************************/ + +/* Equivalent to efx_link_set_advertising with all-zeroes, except does not + * force the Autoneg bit on. + */ +void efx_link_clear_advertising(struct efx_nic *efx) +{ + bitmap_zero(efx->link_advertising, __ETHTOOL_LINK_MODE_MASK_NBITS); + efx->wanted_fc &= ~(EFX_FC_TX | EFX_FC_RX); +} + +void efx_link_set_wanted_fc(struct efx_nic *efx, u8 wanted_fc) +{ + efx->wanted_fc = wanted_fc; + if (efx->link_advertising[0]) { + if (wanted_fc & EFX_FC_RX) + efx->link_advertising[0] |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + else + efx->link_advertising[0] &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + if (wanted_fc & EFX_FC_TX) + efx->link_advertising[0] ^= ADVERTISED_Asym_Pause; + } +} + +static void efx_start_port(struct efx_nic *efx) +{ + netif_dbg(efx, ifup, efx->net_dev, "start port\n"); + BUG_ON(efx->port_enabled); + + mutex_lock(&efx->mac_lock); + efx->port_enabled = true; + + /* Ensure MAC ingress/egress is enabled */ + efx_mac_reconfigure(efx, false); + + mutex_unlock(&efx->mac_lock); +} + +/* Cancel work for MAC reconfiguration, periodic hardware monitoring + * and the async self-test, wait for them to finish and prevent them + * being scheduled again. This doesn't cover online resets, which + * should only be cancelled when removing the device. + */ +static void efx_stop_port(struct efx_nic *efx) +{ + netif_dbg(efx, ifdown, efx->net_dev, "stop port\n"); + + EFX_ASSERT_RESET_SERIALISED(efx); + + mutex_lock(&efx->mac_lock); + efx->port_enabled = false; + mutex_unlock(&efx->mac_lock); + + /* Serialise against efx_set_multicast_list() */ + netif_addr_lock_bh(efx->net_dev); + netif_addr_unlock_bh(efx->net_dev); + + cancel_delayed_work_sync(&efx->monitor_work); + efx_selftest_async_cancel(efx); + cancel_work_sync(&efx->mac_work); +} + +/* If the interface is supposed to be running but is not, start + * the hardware and software data path, regular activity for the port + * (MAC statistics, link polling, etc.) and schedule the port to be + * reconfigured. Interrupts must already be enabled. This function + * is safe to call multiple times, so long as the NIC is not disabled. + * Requires the RTNL lock. + */ +void efx_start_all(struct efx_nic *efx) +{ + EFX_ASSERT_RESET_SERIALISED(efx); + BUG_ON(efx->state == STATE_DISABLED); + + /* Check that it is appropriate to restart the interface. All + * of these flags are safe to read under just the rtnl lock + */ + if (efx->port_enabled || !netif_running(efx->net_dev) || + efx->reset_pending) + return; + + efx_start_port(efx); + efx_start_datapath(efx); + + /* Start the hardware monitor if there is one */ + efx_start_monitor(efx); + + efx_selftest_async_start(efx); + + /* Link state detection is normally event-driven; we have + * to poll now because we could have missed a change + */ + mutex_lock(&efx->mac_lock); + if (efx_mcdi_phy_poll(efx)) + efx_link_status_changed(efx); + mutex_unlock(&efx->mac_lock); + + if (efx->type->start_stats) { + efx->type->start_stats(efx); + efx->type->pull_stats(efx); + spin_lock_bh(&efx->stats_lock); + efx->type->update_stats(efx, NULL, NULL); + spin_unlock_bh(&efx->stats_lock); + } +} + +/* Quiesce the hardware and software data path, and regular activity + * for the port without bringing the link down. Safe to call multiple + * times with the NIC in almost any state, but interrupts should be + * enabled. Requires the RTNL lock. + */ +void efx_stop_all(struct efx_nic *efx) +{ + EFX_ASSERT_RESET_SERIALISED(efx); + + /* port_enabled can be read safely under the rtnl lock */ + if (!efx->port_enabled) + return; + + if (efx->type->update_stats) { + /* update stats before we go down so we can accurately count + * rx_nodesc_drops + */ + efx->type->pull_stats(efx); + spin_lock_bh(&efx->stats_lock); + efx->type->update_stats(efx, NULL, NULL); + spin_unlock_bh(&efx->stats_lock); + efx->type->stop_stats(efx); + } + + efx_stop_port(efx); + + /* Stop the kernel transmit interface. This is only valid if + * the device is stopped or detached; otherwise the watchdog + * may fire immediately. + */ + WARN_ON(netif_running(efx->net_dev) && + netif_device_present(efx->net_dev)); + netif_tx_disable(efx->net_dev); + + efx_stop_datapath(efx); +} + +/* Context: process, dev_base_lock or RTNL held, non-blocking. */ +void efx_net_stats(struct net_device *net_dev, struct rtnl_link_stats64 *stats) +{ + struct efx_nic *efx = netdev_priv(net_dev); + + spin_lock_bh(&efx->stats_lock); + efx_nic_update_stats_atomic(efx, NULL, stats); + spin_unlock_bh(&efx->stats_lock); +} + +/* Push loopback/power/transmit disable settings to the PHY, and reconfigure + * the MAC appropriately. All other PHY configuration changes are pushed + * through phy_op->set_settings(), and pushed asynchronously to the MAC + * through efx_monitor(). + * + * Callers must hold the mac_lock + */ +int __efx_reconfigure_port(struct efx_nic *efx) +{ + enum efx_phy_mode phy_mode; + int rc = 0; + + WARN_ON(!mutex_is_locked(&efx->mac_lock)); + + /* Disable PHY transmit in mac level loopbacks */ + phy_mode = efx->phy_mode; + if (LOOPBACK_INTERNAL(efx)) + efx->phy_mode |= PHY_MODE_TX_DISABLED; + else + efx->phy_mode &= ~PHY_MODE_TX_DISABLED; + + if (efx->type->reconfigure_port) + rc = efx->type->reconfigure_port(efx); + + if (rc) + efx->phy_mode = phy_mode; + + return rc; +} + +/* Reinitialise the MAC to pick up new PHY settings, even if the port is + * disabled. + */ +int efx_reconfigure_port(struct efx_nic *efx) +{ + int rc; + + EFX_ASSERT_RESET_SERIALISED(efx); + + mutex_lock(&efx->mac_lock); + rc = __efx_reconfigure_port(efx); + mutex_unlock(&efx->mac_lock); + + return rc; +} + +/************************************************************************** + * + * Device reset and suspend + * + **************************************************************************/ + +static void efx_wait_for_bist_end(struct efx_nic *efx) +{ + int i; + + for (i = 0; i < BIST_WAIT_DELAY_COUNT; ++i) { + if (efx_mcdi_poll_reboot(efx)) + goto out; + msleep(BIST_WAIT_DELAY_MS); + } + + netif_err(efx, drv, efx->net_dev, "Warning: No MC reboot after BIST mode\n"); +out: + /* Either way unset the BIST flag. If we found no reboot we probably + * won't recover, but we should try. + */ + efx->mc_bist_for_other_fn = false; +} + +/* Try recovery mechanisms. + * For now only EEH is supported. + * Returns 0 if the recovery mechanisms are unsuccessful. + * Returns a non-zero value otherwise. + */ +int efx_try_recovery(struct efx_nic *efx) +{ +#ifdef CONFIG_EEH + /* A PCI error can occur and not be seen by EEH because nothing + * happens on the PCI bus. In this case the driver may fail and + * schedule a 'recover or reset', leading to this recovery handler. + * Manually call the eeh failure check function. + */ + struct eeh_dev *eehdev = pci_dev_to_eeh_dev(efx->pci_dev); + if (eeh_dev_check_failure(eehdev)) { + /* The EEH mechanisms will handle the error and reset the + * device if necessary. + */ + return 1; + } +#endif + return 0; +} + +/* Tears down the entire software state and most of the hardware state + * before reset. + */ +void efx_reset_down(struct efx_nic *efx, enum reset_type method) +{ + EFX_ASSERT_RESET_SERIALISED(efx); + + if (method == RESET_TYPE_MCDI_TIMEOUT) + efx->type->prepare_flr(efx); + + efx_stop_all(efx); + efx_disable_interrupts(efx); + + mutex_lock(&efx->mac_lock); + down_write(&efx->filter_sem); + mutex_lock(&efx->rss_lock); + efx->type->fini(efx); +} + +/* Context: netif_tx_lock held, BHs disabled. */ +void efx_watchdog(struct net_device *net_dev, unsigned int txqueue) +{ + struct efx_nic *efx = netdev_priv(net_dev); + + netif_err(efx, tx_err, efx->net_dev, + "TX stuck with port_enabled=%d: resetting channels\n", + efx->port_enabled); + + efx_schedule_reset(efx, RESET_TYPE_TX_WATCHDOG); +} + +/* This function will always ensure that the locks acquired in + * efx_reset_down() are released. A failure return code indicates + * that we were unable to reinitialise the hardware, and the + * driver should be disabled. If ok is false, then the rx and tx + * engines are not restarted, pending a RESET_DISABLE. + */ +int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok) +{ + int rc; + + EFX_ASSERT_RESET_SERIALISED(efx); + + if (method == RESET_TYPE_MCDI_TIMEOUT) + efx->type->finish_flr(efx); + + /* Ensure that SRAM is initialised even if we're disabling the device */ + rc = efx->type->init(efx); + if (rc) { + netif_err(efx, drv, efx->net_dev, "failed to initialise NIC\n"); + goto fail; + } + + if (!ok) + goto fail; + + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE && + method != RESET_TYPE_DATAPATH) { + rc = efx_mcdi_port_reconfigure(efx); + if (rc && rc != -EPERM) + netif_err(efx, drv, efx->net_dev, + "could not restore PHY settings\n"); + } + + rc = efx_enable_interrupts(efx); + if (rc) + goto fail; + +#ifdef CONFIG_SFC_SRIOV + rc = efx->type->vswitching_restore(efx); + if (rc) /* not fatal; the PF will still work fine */ + netif_warn(efx, probe, efx->net_dev, + "failed to restore vswitching rc=%d;" + " VFs may not function\n", rc); +#endif + + if (efx->type->rx_restore_rss_contexts) + efx->type->rx_restore_rss_contexts(efx); + mutex_unlock(&efx->rss_lock); + efx->type->filter_table_restore(efx); + up_write(&efx->filter_sem); + if (efx->type->sriov_reset) + efx->type->sriov_reset(efx); + + mutex_unlock(&efx->mac_lock); + + efx_start_all(efx); + + if (efx->type->udp_tnl_push_ports) + efx->type->udp_tnl_push_ports(efx); + + return 0; + +fail: + efx->port_initialized = false; + + mutex_unlock(&efx->rss_lock); + up_write(&efx->filter_sem); + mutex_unlock(&efx->mac_lock); + + return rc; +} + +/* Reset the NIC using the specified method. Note that the reset may + * fail, in which case the card will be left in an unusable state. + * + * Caller must hold the rtnl_lock. + */ +int efx_reset(struct efx_nic *efx, enum reset_type method) +{ + int rc, rc2 = 0; + bool disabled; + + netif_info(efx, drv, efx->net_dev, "resetting (%s)\n", + RESET_TYPE(method)); + + efx_device_detach_sync(efx); + /* efx_reset_down() grabs locks that prevent recovery on EF100. + * EF100 reset is handled in the efx_nic_type callback below. + */ + if (efx_nic_rev(efx) != EFX_REV_EF100) + efx_reset_down(efx, method); + + rc = efx->type->reset(efx, method); + if (rc) { + netif_err(efx, drv, efx->net_dev, "failed to reset hardware\n"); + goto out; + } + + /* Clear flags for the scopes we covered. We assume the NIC and + * driver are now quiescent so that there is no race here. + */ + if (method < RESET_TYPE_MAX_METHOD) + efx->reset_pending &= -(1 << (method + 1)); + else /* it doesn't fit into the well-ordered scope hierarchy */ + __clear_bit(method, &efx->reset_pending); + + /* Reinitialise bus-mastering, which may have been turned off before + * the reset was scheduled. This is still appropriate, even in the + * RESET_TYPE_DISABLE since this driver generally assumes the hardware + * can respond to requests. + */ + pci_set_master(efx->pci_dev); + +out: + /* Leave device stopped if necessary */ + disabled = rc || + method == RESET_TYPE_DISABLE || + method == RESET_TYPE_RECOVER_OR_DISABLE; + if (efx_nic_rev(efx) != EFX_REV_EF100) + rc2 = efx_reset_up(efx, method, !disabled); + if (rc2) { + disabled = true; + if (!rc) + rc = rc2; + } + + if (disabled) { + dev_close(efx->net_dev); + netif_err(efx, drv, efx->net_dev, "has been disabled\n"); + efx->state = STATE_DISABLED; + } else { + netif_dbg(efx, drv, efx->net_dev, "reset complete\n"); + efx_device_attach_if_not_resetting(efx); + } + return rc; +} + +/* The worker thread exists so that code that cannot sleep can + * schedule a reset for later. + */ +static void efx_reset_work(struct work_struct *data) +{ + struct efx_nic *efx = container_of(data, struct efx_nic, reset_work); + unsigned long pending; + enum reset_type method; + + pending = READ_ONCE(efx->reset_pending); + method = fls(pending) - 1; + + if (method == RESET_TYPE_MC_BIST) + efx_wait_for_bist_end(efx); + + if ((method == RESET_TYPE_RECOVER_OR_DISABLE || + method == RESET_TYPE_RECOVER_OR_ALL) && + efx_try_recovery(efx)) + return; + + if (!pending) + return; + + rtnl_lock(); + + /* We checked the state in efx_schedule_reset() but it may + * have changed by now. Now that we have the RTNL lock, + * it cannot change again. + */ + if (efx_net_active(efx->state)) + (void)efx_reset(efx, method); + + rtnl_unlock(); +} + +void efx_schedule_reset(struct efx_nic *efx, enum reset_type type) +{ + enum reset_type method; + + if (efx_recovering(efx->state)) { + netif_dbg(efx, drv, efx->net_dev, + "recovering: skip scheduling %s reset\n", + RESET_TYPE(type)); + return; + } + + switch (type) { + case RESET_TYPE_INVISIBLE: + case RESET_TYPE_ALL: + case RESET_TYPE_RECOVER_OR_ALL: + case RESET_TYPE_WORLD: + case RESET_TYPE_DISABLE: + case RESET_TYPE_RECOVER_OR_DISABLE: + case RESET_TYPE_DATAPATH: + case RESET_TYPE_MC_BIST: + case RESET_TYPE_MCDI_TIMEOUT: + method = type; + netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n", + RESET_TYPE(method)); + break; + default: + method = efx->type->map_reset_reason(type); + netif_dbg(efx, drv, efx->net_dev, + "scheduling %s reset for %s\n", + RESET_TYPE(method), RESET_TYPE(type)); + break; + } + + set_bit(method, &efx->reset_pending); + smp_mb(); /* ensure we change reset_pending before checking state */ + + /* If we're not READY then just leave the flags set as the cue + * to abort probing or reschedule the reset later. + */ + if (!efx_net_active(READ_ONCE(efx->state))) + return; + + /* efx_process_channel() will no longer read events once a + * reset is scheduled. So switch back to poll'd MCDI completions. + */ + efx_mcdi_mode_poll(efx); + + efx_queue_reset_work(efx); +} + +/************************************************************************** + * + * Dummy NIC operations + * + * Can be used for some unimplemented operations + * Needed so all function pointers are valid and do not have to be tested + * before use + * + **************************************************************************/ +int efx_port_dummy_op_int(struct efx_nic *efx) +{ + return 0; +} +void efx_port_dummy_op_void(struct efx_nic *efx) {} + +/************************************************************************** + * + * Data housekeeping + * + **************************************************************************/ + +/* This zeroes out and then fills in the invariants in a struct + * efx_nic (including all sub-structures). + */ +int efx_init_struct(struct efx_nic *efx, + struct pci_dev *pci_dev, struct net_device *net_dev) +{ + int rc = -ENOMEM; + + /* Initialise common structures */ + INIT_LIST_HEAD(&efx->node); + INIT_LIST_HEAD(&efx->secondary_list); + spin_lock_init(&efx->biu_lock); +#ifdef CONFIG_SFC_MTD + INIT_LIST_HEAD(&efx->mtd_list); +#endif + INIT_WORK(&efx->reset_work, efx_reset_work); + INIT_DELAYED_WORK(&efx->monitor_work, efx_monitor); + efx_selftest_async_init(efx); + efx->pci_dev = pci_dev; + efx->msg_enable = debug; + efx->state = STATE_UNINIT; + strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name)); + + efx->net_dev = net_dev; + efx->rx_prefix_size = efx->type->rx_prefix_size; + efx->rx_ip_align = + NET_IP_ALIGN ? (efx->rx_prefix_size + NET_IP_ALIGN) % 4 : 0; + efx->rx_packet_hash_offset = + efx->type->rx_hash_offset - efx->type->rx_prefix_size; + efx->rx_packet_ts_offset = + efx->type->rx_ts_offset - efx->type->rx_prefix_size; + INIT_LIST_HEAD(&efx->rss_context.list); + efx->rss_context.context_id = EFX_MCDI_RSS_CONTEXT_INVALID; + mutex_init(&efx->rss_lock); + efx->vport_id = EVB_PORT_ID_ASSIGNED; + spin_lock_init(&efx->stats_lock); + efx->vi_stride = EFX_DEFAULT_VI_STRIDE; + efx->num_mac_stats = MC_CMD_MAC_NSTATS; + BUILD_BUG_ON(MC_CMD_MAC_NSTATS - 1 != MC_CMD_MAC_GENERATION_END); + mutex_init(&efx->mac_lock); + init_rwsem(&efx->filter_sem); +#ifdef CONFIG_RFS_ACCEL + mutex_init(&efx->rps_mutex); + spin_lock_init(&efx->rps_hash_lock); + /* Failure to allocate is not fatal, but may degrade ARFS performance */ + efx->rps_hash_table = kcalloc(EFX_ARFS_HASH_TABLE_SIZE, + sizeof(*efx->rps_hash_table), GFP_KERNEL); +#endif + efx->mdio.dev = net_dev; + INIT_WORK(&efx->mac_work, efx_mac_work); + init_waitqueue_head(&efx->flush_wq); + + efx->tx_queues_per_channel = 1; + efx->rxq_entries = EFX_DEFAULT_DMAQ_SIZE; + efx->txq_entries = EFX_DEFAULT_DMAQ_SIZE; + + efx->mem_bar = UINT_MAX; + + rc = efx_init_channels(efx); + if (rc) + goto fail; + + /* Would be good to use the net_dev name, but we're too early */ + snprintf(efx->workqueue_name, sizeof(efx->workqueue_name), "sfc%s", + pci_name(pci_dev)); + efx->workqueue = create_singlethread_workqueue(efx->workqueue_name); + if (!efx->workqueue) { + rc = -ENOMEM; + goto fail; + } + + return 0; + +fail: + efx_fini_struct(efx); + return rc; +} + +void efx_fini_struct(struct efx_nic *efx) +{ +#ifdef CONFIG_RFS_ACCEL + kfree(efx->rps_hash_table); +#endif + + efx_fini_channels(efx); + + kfree(efx->vpd_sn); + + if (efx->workqueue) { + destroy_workqueue(efx->workqueue); + efx->workqueue = NULL; + } +} + +/* This configures the PCI device to enable I/O and DMA. */ +int efx_init_io(struct efx_nic *efx, int bar, dma_addr_t dma_mask, + unsigned int mem_map_size) +{ + struct pci_dev *pci_dev = efx->pci_dev; + int rc; + + efx->mem_bar = UINT_MAX; + + netif_dbg(efx, probe, efx->net_dev, "initialising I/O bar=%d\n", bar); + + rc = pci_enable_device(pci_dev); + if (rc) { + netif_err(efx, probe, efx->net_dev, + "failed to enable PCI device\n"); + goto fail1; + } + + pci_set_master(pci_dev); + + rc = dma_set_mask_and_coherent(&pci_dev->dev, dma_mask); + if (rc) { + netif_err(efx, probe, efx->net_dev, + "could not find a suitable DMA mask\n"); + goto fail2; + } + netif_dbg(efx, probe, efx->net_dev, + "using DMA mask %llx\n", (unsigned long long)dma_mask); + + efx->membase_phys = pci_resource_start(efx->pci_dev, bar); + if (!efx->membase_phys) { + netif_err(efx, probe, efx->net_dev, + "ERROR: No BAR%d mapping from the BIOS. " + "Try pci=realloc on the kernel command line\n", bar); + rc = -ENODEV; + goto fail3; + } + + rc = pci_request_region(pci_dev, bar, "sfc"); + if (rc) { + netif_err(efx, probe, efx->net_dev, + "request for memory BAR[%d] failed\n", bar); + rc = -EIO; + goto fail3; + } + efx->mem_bar = bar; + efx->membase = ioremap(efx->membase_phys, mem_map_size); + if (!efx->membase) { + netif_err(efx, probe, efx->net_dev, + "could not map memory BAR[%d] at %llx+%x\n", bar, + (unsigned long long)efx->membase_phys, mem_map_size); + rc = -ENOMEM; + goto fail4; + } + netif_dbg(efx, probe, efx->net_dev, + "memory BAR[%d] at %llx+%x (virtual %p)\n", bar, + (unsigned long long)efx->membase_phys, mem_map_size, + efx->membase); + + return 0; + +fail4: + pci_release_region(efx->pci_dev, bar); +fail3: + efx->membase_phys = 0; +fail2: + pci_disable_device(efx->pci_dev); +fail1: + return rc; +} + +void efx_fini_io(struct efx_nic *efx) +{ + netif_dbg(efx, drv, efx->net_dev, "shutting down I/O\n"); + + if (efx->membase) { + iounmap(efx->membase); + efx->membase = NULL; + } + + if (efx->membase_phys) { + pci_release_region(efx->pci_dev, efx->mem_bar); + efx->membase_phys = 0; + efx->mem_bar = UINT_MAX; + } + + /* Don't disable bus-mastering if VFs are assigned */ + if (!pci_vfs_assigned(efx->pci_dev)) + pci_disable_device(efx->pci_dev); +} + +#ifdef CONFIG_SFC_MCDI_LOGGING +static ssize_t show_mcdi_log(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct efx_nic *efx = dev_get_drvdata(dev); + struct efx_mcdi_iface *mcdi = efx_mcdi(efx); + + return scnprintf(buf, PAGE_SIZE, "%d\n", mcdi->logging_enabled); +} + +static ssize_t set_mcdi_log(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct efx_nic *efx = dev_get_drvdata(dev); + struct efx_mcdi_iface *mcdi = efx_mcdi(efx); + bool enable = count > 0 && *buf != '0'; + + mcdi->logging_enabled = enable; + return count; +} + +static DEVICE_ATTR(mcdi_logging, 0644, show_mcdi_log, set_mcdi_log); + +void efx_init_mcdi_logging(struct efx_nic *efx) +{ + int rc = device_create_file(&efx->pci_dev->dev, &dev_attr_mcdi_logging); + + if (rc) { + netif_warn(efx, drv, efx->net_dev, + "failed to init net dev attributes\n"); + } +} + +void efx_fini_mcdi_logging(struct efx_nic *efx) +{ + device_remove_file(&efx->pci_dev->dev, &dev_attr_mcdi_logging); +} +#endif + +/* A PCI error affecting this device was detected. + * At this point MMIO and DMA may be disabled. + * Stop the software path and request a slot reset. + */ +static pci_ers_result_t efx_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; + struct efx_nic *efx = pci_get_drvdata(pdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + rtnl_lock(); + + if (efx->state != STATE_DISABLED) { + efx->state = efx_recover(efx->state); + efx->reset_pending = 0; + + efx_device_detach_sync(efx); + + efx_stop_all(efx); + efx_disable_interrupts(efx); + + status = PCI_ERS_RESULT_NEED_RESET; + } else { + /* If the interface is disabled we don't want to do anything + * with it. + */ + status = PCI_ERS_RESULT_RECOVERED; + } + + rtnl_unlock(); + + pci_disable_device(pdev); + + return status; +} + +/* Fake a successful reset, which will be performed later in efx_io_resume. */ +static pci_ers_result_t efx_io_slot_reset(struct pci_dev *pdev) +{ + struct efx_nic *efx = pci_get_drvdata(pdev); + pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; + + if (pci_enable_device(pdev)) { + netif_err(efx, hw, efx->net_dev, + "Cannot re-enable PCI device after reset.\n"); + status = PCI_ERS_RESULT_DISCONNECT; + } + + return status; +} + +/* Perform the actual reset and resume I/O operations. */ +static void efx_io_resume(struct pci_dev *pdev) +{ + struct efx_nic *efx = pci_get_drvdata(pdev); + int rc; + + rtnl_lock(); + + if (efx->state == STATE_DISABLED) + goto out; + + rc = efx_reset(efx, RESET_TYPE_ALL); + if (rc) { + netif_err(efx, hw, efx->net_dev, + "efx_reset failed after PCI error (%d)\n", rc); + } else { + efx->state = efx_recovered(efx->state); + netif_dbg(efx, hw, efx->net_dev, + "Done resetting and resuming IO after PCI error.\n"); + } + +out: + rtnl_unlock(); +} + +/* For simplicity and reliability, we always require a slot reset and try to + * reset the hardware when a pci error affecting the device is detected. + * We leave both the link_reset and mmio_enabled callback unimplemented: + * with our request for slot reset the mmio_enabled callback will never be + * called, and the link_reset callback is not used by AER or EEH mechanisms. + */ +const struct pci_error_handlers efx_err_handlers = { + .error_detected = efx_io_error_detected, + .slot_reset = efx_io_slot_reset, + .resume = efx_io_resume, +}; + +/* Determine whether the NIC will be able to handle TX offloads for a given + * encapsulated packet. + */ +static bool efx_can_encap_offloads(struct efx_nic *efx, struct sk_buff *skb) +{ + struct gre_base_hdr *greh; + __be16 dst_port; + u8 ipproto; + + /* Does the NIC support encap offloads? + * If not, we should never get here, because we shouldn't have + * advertised encap offload feature flags in the first place. + */ + if (WARN_ON_ONCE(!efx->type->udp_tnl_has_port)) + return false; + + /* Determine encapsulation protocol in use */ + switch (skb->protocol) { + case htons(ETH_P_IP): + ipproto = ip_hdr(skb)->protocol; + break; + case htons(ETH_P_IPV6): + /* If there are extension headers, this will cause us to + * think we can't offload something that we maybe could have. + */ + ipproto = ipv6_hdr(skb)->nexthdr; + break; + default: + /* Not IP, so can't offload it */ + return false; + } + switch (ipproto) { + case IPPROTO_GRE: + /* We support NVGRE but not IP over GRE or random gretaps. + * Specifically, the NIC will accept GRE as encapsulated if + * the inner protocol is Ethernet, but only handle it + * correctly if the GRE header is 8 bytes long. Moreover, + * it will not update the Checksum or Sequence Number fields + * if they are present. (The Routing Present flag, + * GRE_ROUTING, cannot be set else the header would be more + * than 8 bytes long; so we don't have to worry about it.) + */ + if (skb->inner_protocol_type != ENCAP_TYPE_ETHER) + return false; + if (ntohs(skb->inner_protocol) != ETH_P_TEB) + return false; + if (skb_inner_mac_header(skb) - skb_transport_header(skb) != 8) + return false; + greh = (struct gre_base_hdr *)skb_transport_header(skb); + return !(greh->flags & (GRE_CSUM | GRE_SEQ)); + case IPPROTO_UDP: + /* If the port is registered for a UDP tunnel, we assume the + * packet is for that tunnel, and the NIC will handle it as + * such. If not, the NIC won't know what to do with it. + */ + dst_port = udp_hdr(skb)->dest; + return efx->type->udp_tnl_has_port(efx, dst_port); + default: + return false; + } +} + +netdev_features_t efx_features_check(struct sk_buff *skb, struct net_device *dev, + netdev_features_t features) +{ + struct efx_nic *efx = netdev_priv(dev); + + if (skb->encapsulation) { + if (features & NETIF_F_GSO_MASK) + /* Hardware can only do TSO with at most 208 bytes + * of headers. + */ + if (skb_inner_transport_offset(skb) > + EFX_TSO2_MAX_HDRLEN) + features &= ~(NETIF_F_GSO_MASK); + if (features & (NETIF_F_GSO_MASK | NETIF_F_CSUM_MASK)) + if (!efx_can_encap_offloads(efx, skb)) + features &= ~(NETIF_F_GSO_MASK | + NETIF_F_CSUM_MASK); + } + return features; +} + +int efx_get_phys_port_id(struct net_device *net_dev, + struct netdev_phys_item_id *ppid) +{ + struct efx_nic *efx = netdev_priv(net_dev); + + if (efx->type->get_phys_port_id) + return efx->type->get_phys_port_id(efx, ppid); + else + return -EOPNOTSUPP; +} + +int efx_get_phys_port_name(struct net_device *net_dev, char *name, size_t len) +{ + struct efx_nic *efx = netdev_priv(net_dev); + + if (snprintf(name, len, "p%u", efx->port_num) >= len) + return -EINVAL; + return 0; +} |