diff options
Diffstat (limited to 'drivers/net/phy/phy.c')
| -rw-r--r-- | drivers/net/phy/phy.c | 1560 |
1 files changed, 1560 insertions, 0 deletions
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c new file mode 100644 index 000000000..f3e606b66 --- /dev/null +++ b/drivers/net/phy/phy.c @@ -0,0 +1,1560 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Framework for configuring and reading PHY devices + * Based on code in sungem_phy.c and gianfar_phy.c + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * Copyright (c) 2006, 2007 Maciej W. Rozycki + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/netlink.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/ethtool_netlink.h> +#include <linux/phy.h> +#include <linux/phy_led_triggers.h> +#include <linux/sfp.h> +#include <linux/workqueue.h> +#include <linux/mdio.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/atomic.h> +#include <net/netlink.h> +#include <net/genetlink.h> +#include <net/sock.h> + +#define PHY_STATE_TIME HZ + +#define PHY_STATE_STR(_state) \ + case PHY_##_state: \ + return __stringify(_state); \ + +static const char *phy_state_to_str(enum phy_state st) +{ + switch (st) { + PHY_STATE_STR(DOWN) + PHY_STATE_STR(READY) + PHY_STATE_STR(UP) + PHY_STATE_STR(RUNNING) + PHY_STATE_STR(NOLINK) + PHY_STATE_STR(CABLETEST) + PHY_STATE_STR(HALTED) + } + + return NULL; +} + +static void phy_process_state_change(struct phy_device *phydev, + enum phy_state old_state) +{ + if (old_state != phydev->state) { + phydev_dbg(phydev, "PHY state change %s -> %s\n", + phy_state_to_str(old_state), + phy_state_to_str(phydev->state)); + if (phydev->drv && phydev->drv->link_change_notify) + phydev->drv->link_change_notify(phydev); + } +} + +static void phy_link_up(struct phy_device *phydev) +{ + phydev->phy_link_change(phydev, true); + phy_led_trigger_change_speed(phydev); +} + +static void phy_link_down(struct phy_device *phydev) +{ + phydev->phy_link_change(phydev, false); + phy_led_trigger_change_speed(phydev); +} + +static const char *phy_pause_str(struct phy_device *phydev) +{ + bool local_pause, local_asym_pause; + + if (phydev->autoneg == AUTONEG_DISABLE) + goto no_pause; + + local_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->advertising); + local_asym_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->advertising); + + if (local_pause && phydev->pause) + return "rx/tx"; + + if (local_asym_pause && phydev->asym_pause) { + if (local_pause) + return "rx"; + if (phydev->pause) + return "tx"; + } + +no_pause: + return "off"; +} + +/** + * phy_print_status - Convenience function to print out the current phy status + * @phydev: the phy_device struct + */ +void phy_print_status(struct phy_device *phydev) +{ + if (phydev->link) { + netdev_info(phydev->attached_dev, + "Link is Up - %s/%s %s- flow control %s\n", + phy_speed_to_str(phydev->speed), + phy_duplex_to_str(phydev->duplex), + phydev->downshifted_rate ? "(downshifted) " : "", + phy_pause_str(phydev)); + } else { + netdev_info(phydev->attached_dev, "Link is Down\n"); + } +} +EXPORT_SYMBOL(phy_print_status); + +/** + * phy_clear_interrupt - Ack the phy device's interrupt + * @phydev: the phy_device struct + * + * If the @phydev driver has an ack_interrupt function, call it to + * ack and clear the phy device's interrupt. + * + * Returns 0 on success or < 0 on error. + */ +static int phy_clear_interrupt(struct phy_device *phydev) +{ + int ret = 0; + + if (phydev->drv->ack_interrupt) { + mutex_lock(&phydev->lock); + ret = phydev->drv->ack_interrupt(phydev); + mutex_unlock(&phydev->lock); + } + + return ret; +} + +/** + * phy_config_interrupt - configure the PHY device for the requested interrupts + * @phydev: the phy_device struct + * @interrupts: interrupt flags to configure for this @phydev + * + * Returns 0 on success or < 0 on error. + */ +static int phy_config_interrupt(struct phy_device *phydev, bool interrupts) +{ + phydev->interrupts = interrupts ? 1 : 0; + if (phydev->drv->config_intr) + return phydev->drv->config_intr(phydev); + + return 0; +} + +/** + * phy_restart_aneg - restart auto-negotiation + * @phydev: target phy_device struct + * + * Restart the autonegotiation on @phydev. Returns >= 0 on success or + * negative errno on error. + */ +int phy_restart_aneg(struct phy_device *phydev) +{ + int ret; + + if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0))) + ret = genphy_c45_restart_aneg(phydev); + else + ret = genphy_restart_aneg(phydev); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_restart_aneg); + +/** + * phy_aneg_done - return auto-negotiation status + * @phydev: target phy_device struct + * + * Description: Return the auto-negotiation status from this @phydev + * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation + * is still pending. + */ +int phy_aneg_done(struct phy_device *phydev) +{ + if (phydev->drv && phydev->drv->aneg_done) + return phydev->drv->aneg_done(phydev); + else if (phydev->is_c45) + return genphy_c45_aneg_done(phydev); + else + return genphy_aneg_done(phydev); +} +EXPORT_SYMBOL(phy_aneg_done); + +/** + * phy_find_valid - find a PHY setting that matches the requested parameters + * @speed: desired speed + * @duplex: desired duplex + * @supported: mask of supported link modes + * + * Locate a supported phy setting that is, in priority order: + * - an exact match for the specified speed and duplex mode + * - a match for the specified speed, or slower speed + * - the slowest supported speed + * Returns the matched phy_setting entry, or %NULL if no supported phy + * settings were found. + */ +static const struct phy_setting * +phy_find_valid(int speed, int duplex, unsigned long *supported) +{ + return phy_lookup_setting(speed, duplex, supported, false); +} + +/** + * phy_supported_speeds - return all speeds currently supported by a phy device + * @phy: The phy device to return supported speeds of. + * @speeds: buffer to store supported speeds in. + * @size: size of speeds buffer. + * + * Description: Returns the number of supported speeds, and fills the speeds + * buffer with the supported speeds. If speeds buffer is too small to contain + * all currently supported speeds, will return as many speeds as can fit. + */ +unsigned int phy_supported_speeds(struct phy_device *phy, + unsigned int *speeds, + unsigned int size) +{ + return phy_speeds(speeds, size, phy->supported); +} + +/** + * phy_check_valid - check if there is a valid PHY setting which matches + * speed, duplex, and feature mask + * @speed: speed to match + * @duplex: duplex to match + * @features: A mask of the valid settings + * + * Description: Returns true if there is a valid setting, false otherwise. + */ +static inline bool phy_check_valid(int speed, int duplex, + unsigned long *features) +{ + return !!phy_lookup_setting(speed, duplex, features, true); +} + +/** + * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex + * @phydev: the target phy_device struct + * + * Description: Make sure the PHY is set to supported speeds and + * duplexes. Drop down by one in this order: 1000/FULL, + * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF. + */ +static void phy_sanitize_settings(struct phy_device *phydev) +{ + const struct phy_setting *setting; + + setting = phy_find_valid(phydev->speed, phydev->duplex, + phydev->supported); + if (setting) { + phydev->speed = setting->speed; + phydev->duplex = setting->duplex; + } else { + /* We failed to find anything (no supported speeds?) */ + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + } +} + +void phy_ethtool_ksettings_get(struct phy_device *phydev, + struct ethtool_link_ksettings *cmd) +{ + mutex_lock(&phydev->lock); + linkmode_copy(cmd->link_modes.supported, phydev->supported); + linkmode_copy(cmd->link_modes.advertising, phydev->advertising); + linkmode_copy(cmd->link_modes.lp_advertising, phydev->lp_advertising); + + cmd->base.speed = phydev->speed; + cmd->base.duplex = phydev->duplex; + cmd->base.master_slave_cfg = phydev->master_slave_get; + cmd->base.master_slave_state = phydev->master_slave_state; + if (phydev->interface == PHY_INTERFACE_MODE_MOCA) + cmd->base.port = PORT_BNC; + else + cmd->base.port = phydev->port; + cmd->base.transceiver = phy_is_internal(phydev) ? + XCVR_INTERNAL : XCVR_EXTERNAL; + cmd->base.phy_address = phydev->mdio.addr; + cmd->base.autoneg = phydev->autoneg; + cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl; + cmd->base.eth_tp_mdix = phydev->mdix; + mutex_unlock(&phydev->lock); +} +EXPORT_SYMBOL(phy_ethtool_ksettings_get); + +/** + * phy_mii_ioctl - generic PHY MII ioctl interface + * @phydev: the phy_device struct + * @ifr: &struct ifreq for socket ioctl's + * @cmd: ioctl cmd to execute + * + * Note that this function is currently incompatible with the + * PHYCONTROL layer. It changes registers without regard to + * current state. Use at own risk. + */ +int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) +{ + struct mii_ioctl_data *mii_data = if_mii(ifr); + u16 val = mii_data->val_in; + bool change_autoneg = false; + int prtad, devad; + + switch (cmd) { + case SIOCGMIIPHY: + mii_data->phy_id = phydev->mdio.addr; + fallthrough; + + case SIOCGMIIREG: + if (mdio_phy_id_is_c45(mii_data->phy_id)) { + prtad = mdio_phy_id_prtad(mii_data->phy_id); + devad = mdio_phy_id_devad(mii_data->phy_id); + devad = mdiobus_c45_addr(devad, mii_data->reg_num); + } else { + prtad = mii_data->phy_id; + devad = mii_data->reg_num; + } + mii_data->val_out = mdiobus_read(phydev->mdio.bus, prtad, + devad); + return 0; + + case SIOCSMIIREG: + if (mdio_phy_id_is_c45(mii_data->phy_id)) { + prtad = mdio_phy_id_prtad(mii_data->phy_id); + devad = mdio_phy_id_devad(mii_data->phy_id); + devad = mdiobus_c45_addr(devad, mii_data->reg_num); + } else { + prtad = mii_data->phy_id; + devad = mii_data->reg_num; + } + if (prtad == phydev->mdio.addr) { + switch (devad) { + case MII_BMCR: + if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) { + if (phydev->autoneg == AUTONEG_ENABLE) + change_autoneg = true; + phydev->autoneg = AUTONEG_DISABLE; + if (val & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + if (val & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (val & BMCR_SPEED100) + phydev->speed = SPEED_100; + else phydev->speed = SPEED_10; + } + else { + if (phydev->autoneg == AUTONEG_DISABLE) + change_autoneg = true; + phydev->autoneg = AUTONEG_ENABLE; + } + break; + case MII_ADVERTISE: + mii_adv_mod_linkmode_adv_t(phydev->advertising, + val); + change_autoneg = true; + break; + case MII_CTRL1000: + mii_ctrl1000_mod_linkmode_adv_t(phydev->advertising, + val); + change_autoneg = true; + break; + default: + /* do nothing */ + break; + } + } + + mdiobus_write(phydev->mdio.bus, prtad, devad, val); + + if (prtad == phydev->mdio.addr && + devad == MII_BMCR && + val & BMCR_RESET) + return phy_init_hw(phydev); + + if (change_autoneg) + return phy_start_aneg(phydev); + + return 0; + + case SIOCSHWTSTAMP: + if (phydev->mii_ts && phydev->mii_ts->hwtstamp) + return phydev->mii_ts->hwtstamp(phydev->mii_ts, ifr); + fallthrough; + + default: + return -EOPNOTSUPP; + } +} +EXPORT_SYMBOL(phy_mii_ioctl); + +/** + * phy_do_ioctl - generic ndo_do_ioctl implementation + * @dev: the net_device struct + * @ifr: &struct ifreq for socket ioctl's + * @cmd: ioctl cmd to execute + */ +int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + if (!dev->phydev) + return -ENODEV; + + return phy_mii_ioctl(dev->phydev, ifr, cmd); +} +EXPORT_SYMBOL(phy_do_ioctl); + +/** + * phy_do_ioctl_running - generic ndo_do_ioctl implementation but test first + * + * @dev: the net_device struct + * @ifr: &struct ifreq for socket ioctl's + * @cmd: ioctl cmd to execute + * + * Same as phy_do_ioctl, but ensures that net_device is running before + * handling the ioctl. + */ +int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + if (!netif_running(dev)) + return -ENODEV; + + return phy_do_ioctl(dev, ifr, cmd); +} +EXPORT_SYMBOL(phy_do_ioctl_running); + +/** + * phy_queue_state_machine - Trigger the state machine to run soon + * + * @phydev: the phy_device struct + * @jiffies: Run the state machine after these jiffies + */ +void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies) +{ + mod_delayed_work(system_power_efficient_wq, &phydev->state_queue, + jiffies); +} +EXPORT_SYMBOL(phy_queue_state_machine); + +/** + * phy_queue_state_machine - Trigger the state machine to run now + * + * @phydev: the phy_device struct + */ +static void phy_trigger_machine(struct phy_device *phydev) +{ + phy_queue_state_machine(phydev, 0); +} + +static void phy_abort_cable_test(struct phy_device *phydev) +{ + int err; + + ethnl_cable_test_finished(phydev); + + err = phy_init_hw(phydev); + if (err) + phydev_err(phydev, "Error while aborting cable test"); +} + +/** + * phy_ethtool_get_strings - Get the statistic counter names + * + * @phydev: the phy_device struct + * @data: Where to put the strings + */ +int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data) +{ + if (!phydev->drv) + return -EIO; + + mutex_lock(&phydev->lock); + phydev->drv->get_strings(phydev, data); + mutex_unlock(&phydev->lock); + + return 0; +} +EXPORT_SYMBOL(phy_ethtool_get_strings); + +/** + * phy_ethtool_get_sset_count - Get the number of statistic counters + * + * @phydev: the phy_device struct + */ +int phy_ethtool_get_sset_count(struct phy_device *phydev) +{ + int ret; + + if (!phydev->drv) + return -EIO; + + if (phydev->drv->get_sset_count && + phydev->drv->get_strings && + phydev->drv->get_stats) { + mutex_lock(&phydev->lock); + ret = phydev->drv->get_sset_count(phydev); + mutex_unlock(&phydev->lock); + + return ret; + } + + return -EOPNOTSUPP; +} +EXPORT_SYMBOL(phy_ethtool_get_sset_count); + +/** + * phy_ethtool_get_stats - Get the statistic counters + * + * @phydev: the phy_device struct + * @stats: What counters to get + * @data: Where to store the counters + */ +int phy_ethtool_get_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) +{ + if (!phydev->drv) + return -EIO; + + mutex_lock(&phydev->lock); + phydev->drv->get_stats(phydev, stats, data); + mutex_unlock(&phydev->lock); + + return 0; +} +EXPORT_SYMBOL(phy_ethtool_get_stats); + +/** + * phy_start_cable_test - Start a cable test + * + * @phydev: the phy_device struct + * @extack: extack for reporting useful error messages + */ +int phy_start_cable_test(struct phy_device *phydev, + struct netlink_ext_ack *extack) +{ + struct net_device *dev = phydev->attached_dev; + int err = -ENOMEM; + + if (!(phydev->drv && + phydev->drv->cable_test_start && + phydev->drv->cable_test_get_status)) { + NL_SET_ERR_MSG(extack, + "PHY driver does not support cable testing"); + return -EOPNOTSUPP; + } + + mutex_lock(&phydev->lock); + if (phydev->state == PHY_CABLETEST) { + NL_SET_ERR_MSG(extack, + "PHY already performing a test"); + err = -EBUSY; + goto out; + } + + if (phydev->state < PHY_UP || + phydev->state > PHY_CABLETEST) { + NL_SET_ERR_MSG(extack, + "PHY not configured. Try setting interface up"); + err = -EBUSY; + goto out; + } + + err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF); + if (err) + goto out; + + /* Mark the carrier down until the test is complete */ + phy_link_down(phydev); + + netif_testing_on(dev); + err = phydev->drv->cable_test_start(phydev); + if (err) { + netif_testing_off(dev); + phy_link_up(phydev); + goto out_free; + } + + phydev->state = PHY_CABLETEST; + + if (phy_polling_mode(phydev)) + phy_trigger_machine(phydev); + + mutex_unlock(&phydev->lock); + + return 0; + +out_free: + ethnl_cable_test_free(phydev); +out: + mutex_unlock(&phydev->lock); + + return err; +} +EXPORT_SYMBOL(phy_start_cable_test); + +/** + * phy_start_cable_test_tdr - Start a raw TDR cable test + * + * @phydev: the phy_device struct + * @extack: extack for reporting useful error messages + * @config: Configuration of the test to run + */ +int phy_start_cable_test_tdr(struct phy_device *phydev, + struct netlink_ext_ack *extack, + const struct phy_tdr_config *config) +{ + struct net_device *dev = phydev->attached_dev; + int err = -ENOMEM; + + if (!(phydev->drv && + phydev->drv->cable_test_tdr_start && + phydev->drv->cable_test_get_status)) { + NL_SET_ERR_MSG(extack, + "PHY driver does not support cable test TDR"); + return -EOPNOTSUPP; + } + + mutex_lock(&phydev->lock); + if (phydev->state == PHY_CABLETEST) { + NL_SET_ERR_MSG(extack, + "PHY already performing a test"); + err = -EBUSY; + goto out; + } + + if (phydev->state < PHY_UP || + phydev->state > PHY_CABLETEST) { + NL_SET_ERR_MSG(extack, + "PHY not configured. Try setting interface up"); + err = -EBUSY; + goto out; + } + + err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_TDR_NTF); + if (err) + goto out; + + /* Mark the carrier down until the test is complete */ + phy_link_down(phydev); + + netif_testing_on(dev); + err = phydev->drv->cable_test_tdr_start(phydev, config); + if (err) { + netif_testing_off(dev); + phy_link_up(phydev); + goto out_free; + } + + phydev->state = PHY_CABLETEST; + + if (phy_polling_mode(phydev)) + phy_trigger_machine(phydev); + + mutex_unlock(&phydev->lock); + + return 0; + +out_free: + ethnl_cable_test_free(phydev); +out: + mutex_unlock(&phydev->lock); + + return err; +} +EXPORT_SYMBOL(phy_start_cable_test_tdr); + +static int phy_config_aneg(struct phy_device *phydev) +{ + if (phydev->drv->config_aneg) + return phydev->drv->config_aneg(phydev); + + /* Clause 45 PHYs that don't implement Clause 22 registers are not + * allowed to call genphy_config_aneg() + */ + if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0))) + return genphy_c45_config_aneg(phydev); + + return genphy_config_aneg(phydev); +} + +/** + * phy_check_link_status - check link status and set state accordingly + * @phydev: the phy_device struct + * + * Description: Check for link and whether autoneg was triggered / is running + * and set state accordingly + */ +static int phy_check_link_status(struct phy_device *phydev) +{ + int err; + + WARN_ON(!mutex_is_locked(&phydev->lock)); + + /* Keep previous state if loopback is enabled because some PHYs + * report that Link is Down when loopback is enabled. + */ + if (phydev->loopback_enabled) + return 0; + + err = phy_read_status(phydev); + if (err) + return err; + + if (phydev->link && phydev->state != PHY_RUNNING) { + phy_check_downshift(phydev); + phydev->state = PHY_RUNNING; + phy_link_up(phydev); + } else if (!phydev->link && phydev->state != PHY_NOLINK) { + phydev->state = PHY_NOLINK; + phy_link_down(phydev); + } + + return 0; +} + +/** + * _phy_start_aneg - start auto-negotiation for this PHY device + * @phydev: the phy_device struct + * + * Description: Sanitizes the settings (if we're not autonegotiating + * them), and then calls the driver's config_aneg function. + * If the PHYCONTROL Layer is operating, we change the state to + * reflect the beginning of Auto-negotiation or forcing. + */ +static int _phy_start_aneg(struct phy_device *phydev) +{ + int err; + + lockdep_assert_held(&phydev->lock); + + if (!phydev->drv) + return -EIO; + + if (AUTONEG_DISABLE == phydev->autoneg) + phy_sanitize_settings(phydev); + + err = phy_config_aneg(phydev); + if (err < 0) + return err; + + if (phy_is_started(phydev)) + err = phy_check_link_status(phydev); + + return err; +} + +/** + * phy_start_aneg - start auto-negotiation for this PHY device + * @phydev: the phy_device struct + * + * Description: Sanitizes the settings (if we're not autonegotiating + * them), and then calls the driver's config_aneg function. + * If the PHYCONTROL Layer is operating, we change the state to + * reflect the beginning of Auto-negotiation or forcing. + */ +int phy_start_aneg(struct phy_device *phydev) +{ + int err; + + mutex_lock(&phydev->lock); + err = _phy_start_aneg(phydev); + mutex_unlock(&phydev->lock); + + return err; +} +EXPORT_SYMBOL(phy_start_aneg); + +static int phy_poll_aneg_done(struct phy_device *phydev) +{ + unsigned int retries = 100; + int ret; + + do { + msleep(100); + ret = phy_aneg_done(phydev); + } while (!ret && --retries); + + if (!ret) + return -ETIMEDOUT; + + return ret < 0 ? ret : 0; +} + +int phy_ethtool_ksettings_set(struct phy_device *phydev, + const struct ethtool_link_ksettings *cmd) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); + u8 autoneg = cmd->base.autoneg; + u8 duplex = cmd->base.duplex; + u32 speed = cmd->base.speed; + + if (cmd->base.phy_address != phydev->mdio.addr) + return -EINVAL; + + linkmode_copy(advertising, cmd->link_modes.advertising); + + /* We make sure that we don't pass unsupported values in to the PHY */ + linkmode_and(advertising, advertising, phydev->supported); + + /* Verify the settings we care about. */ + if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE) + return -EINVAL; + + if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising)) + return -EINVAL; + + if (autoneg == AUTONEG_DISABLE && + ((speed != SPEED_1000 && + speed != SPEED_100 && + speed != SPEED_10) || + (duplex != DUPLEX_HALF && + duplex != DUPLEX_FULL))) + return -EINVAL; + + mutex_lock(&phydev->lock); + phydev->autoneg = autoneg; + + if (autoneg == AUTONEG_DISABLE) { + phydev->speed = speed; + phydev->duplex = duplex; + } + + linkmode_copy(phydev->advertising, advertising); + + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + phydev->advertising, autoneg == AUTONEG_ENABLE); + + phydev->master_slave_set = cmd->base.master_slave_cfg; + phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl; + + /* Restart the PHY */ + if (phy_is_started(phydev)) { + phydev->state = PHY_UP; + phy_trigger_machine(phydev); + } else { + _phy_start_aneg(phydev); + } + + mutex_unlock(&phydev->lock); + return 0; +} +EXPORT_SYMBOL(phy_ethtool_ksettings_set); + +/** + * phy_speed_down - set speed to lowest speed supported by both link partners + * @phydev: the phy_device struct + * @sync: perform action synchronously + * + * Description: Typically used to save energy when waiting for a WoL packet + * + * WARNING: Setting sync to false may cause the system being unable to suspend + * in case the PHY generates an interrupt when finishing the autonegotiation. + * This interrupt may wake up the system immediately after suspend. + * Therefore use sync = false only if you're sure it's safe with the respective + * network chip. + */ +int phy_speed_down(struct phy_device *phydev, bool sync) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp); + int ret; + + if (phydev->autoneg != AUTONEG_ENABLE) + return 0; + + linkmode_copy(adv_tmp, phydev->advertising); + + ret = phy_speed_down_core(phydev); + if (ret) + return ret; + + linkmode_copy(phydev->adv_old, adv_tmp); + + if (linkmode_equal(phydev->advertising, adv_tmp)) + return 0; + + ret = phy_config_aneg(phydev); + if (ret) + return ret; + + return sync ? phy_poll_aneg_done(phydev) : 0; +} +EXPORT_SYMBOL_GPL(phy_speed_down); + +/** + * phy_speed_up - (re)set advertised speeds to all supported speeds + * @phydev: the phy_device struct + * + * Description: Used to revert the effect of phy_speed_down + */ +int phy_speed_up(struct phy_device *phydev) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp); + + if (phydev->autoneg != AUTONEG_ENABLE) + return 0; + + if (linkmode_empty(phydev->adv_old)) + return 0; + + linkmode_copy(adv_tmp, phydev->advertising); + linkmode_copy(phydev->advertising, phydev->adv_old); + linkmode_zero(phydev->adv_old); + + if (linkmode_equal(phydev->advertising, adv_tmp)) + return 0; + + return phy_config_aneg(phydev); +} +EXPORT_SYMBOL_GPL(phy_speed_up); + +/** + * phy_start_machine - start PHY state machine tracking + * @phydev: the phy_device struct + * + * Description: The PHY infrastructure can run a state machine + * which tracks whether the PHY is starting up, negotiating, + * etc. This function starts the delayed workqueue which tracks + * the state of the PHY. If you want to maintain your own state machine, + * do not call this function. + */ +void phy_start_machine(struct phy_device *phydev) +{ + phy_trigger_machine(phydev); +} +EXPORT_SYMBOL_GPL(phy_start_machine); + +/** + * phy_stop_machine - stop the PHY state machine tracking + * @phydev: target phy_device struct + * + * Description: Stops the state machine delayed workqueue, sets the + * state to UP (unless it wasn't up yet). This function must be + * called BEFORE phy_detach. + */ +void phy_stop_machine(struct phy_device *phydev) +{ + cancel_delayed_work_sync(&phydev->state_queue); + + mutex_lock(&phydev->lock); + if (phy_is_started(phydev)) + phydev->state = PHY_UP; + mutex_unlock(&phydev->lock); +} + +/** + * phy_error - enter HALTED state for this PHY device + * @phydev: target phy_device struct + * + * Moves the PHY to the HALTED state in response to a read + * or write error, and tells the controller the link is down. + * Must not be called from interrupt context, or while the + * phydev->lock is held. + */ +static void phy_error(struct phy_device *phydev) +{ + WARN_ON(1); + + mutex_lock(&phydev->lock); + phydev->state = PHY_HALTED; + mutex_unlock(&phydev->lock); + + phy_trigger_machine(phydev); +} + +/** + * phy_disable_interrupts - Disable the PHY interrupts from the PHY side + * @phydev: target phy_device struct + */ +int phy_disable_interrupts(struct phy_device *phydev) +{ + int err; + + /* Disable PHY interrupts */ + err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); + if (err) + return err; + + /* Clear the interrupt */ + return phy_clear_interrupt(phydev); +} + +/** + * phy_did_interrupt - Checks if the PHY generated an interrupt + * @phydev: target phy_device struct + */ +static int phy_did_interrupt(struct phy_device *phydev) +{ + int ret; + + mutex_lock(&phydev->lock); + ret = phydev->drv->did_interrupt(phydev); + mutex_unlock(&phydev->lock); + + return ret; +} + +/** + * phy_handle_interrupt - Handle PHY interrupt + * @phydev: target phy_device struct + */ +static irqreturn_t phy_handle_interrupt(struct phy_device *phydev) +{ + irqreturn_t ret; + + mutex_lock(&phydev->lock); + ret = phydev->drv->handle_interrupt(phydev); + mutex_unlock(&phydev->lock); + + return ret; +} + +/** + * phy_interrupt - PHY interrupt handler + * @irq: interrupt line + * @phy_dat: phy_device pointer + * + * Description: Handle PHY interrupt + */ +static irqreturn_t phy_interrupt(int irq, void *phy_dat) +{ + struct phy_device *phydev = phy_dat; + struct phy_driver *drv = phydev->drv; + + if (drv->handle_interrupt) + return phy_handle_interrupt(phydev); + + if (drv->did_interrupt && !phy_did_interrupt(phydev)) + return IRQ_NONE; + + /* reschedule state queue work to run as soon as possible */ + phy_trigger_machine(phydev); + + /* did_interrupt() may have cleared the interrupt already */ + if (!drv->did_interrupt && phy_clear_interrupt(phydev)) { + phy_error(phydev); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +/** + * phy_enable_interrupts - Enable the interrupts from the PHY side + * @phydev: target phy_device struct + */ +static int phy_enable_interrupts(struct phy_device *phydev) +{ + int err = phy_clear_interrupt(phydev); + + if (err < 0) + return err; + + return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); +} + +/** + * phy_request_interrupt - request and enable interrupt for a PHY device + * @phydev: target phy_device struct + * + * Description: Request and enable the interrupt for the given PHY. + * If this fails, then we set irq to PHY_POLL. + * This should only be called with a valid IRQ number. + */ +void phy_request_interrupt(struct phy_device *phydev) +{ + int err; + + err = request_threaded_irq(phydev->irq, NULL, phy_interrupt, + IRQF_ONESHOT | IRQF_SHARED, + phydev_name(phydev), phydev); + if (err) { + phydev_warn(phydev, "Error %d requesting IRQ %d, falling back to polling\n", + err, phydev->irq); + phydev->irq = PHY_POLL; + } else { + if (phy_enable_interrupts(phydev)) { + phydev_warn(phydev, "Can't enable interrupt, falling back to polling\n"); + phy_free_interrupt(phydev); + phydev->irq = PHY_POLL; + } + } +} +EXPORT_SYMBOL(phy_request_interrupt); + +/** + * phy_free_interrupt - disable and free interrupt for a PHY device + * @phydev: target phy_device struct + * + * Description: Disable and free the interrupt for the given PHY. + * This should only be called with a valid IRQ number. + */ +void phy_free_interrupt(struct phy_device *phydev) +{ + phy_disable_interrupts(phydev); + free_irq(phydev->irq, phydev); +} +EXPORT_SYMBOL(phy_free_interrupt); + +/** + * phy_stop - Bring down the PHY link, and stop checking the status + * @phydev: target phy_device struct + */ +void phy_stop(struct phy_device *phydev) +{ + struct net_device *dev = phydev->attached_dev; + enum phy_state old_state; + + if (!phy_is_started(phydev) && phydev->state != PHY_DOWN) { + WARN(1, "called from state %s\n", + phy_state_to_str(phydev->state)); + return; + } + + mutex_lock(&phydev->lock); + old_state = phydev->state; + + if (phydev->state == PHY_CABLETEST) { + phy_abort_cable_test(phydev); + netif_testing_off(dev); + } + + if (phydev->sfp_bus) + sfp_upstream_stop(phydev->sfp_bus); + + phydev->state = PHY_HALTED; + phy_process_state_change(phydev, old_state); + + mutex_unlock(&phydev->lock); + + phy_state_machine(&phydev->state_queue.work); + phy_stop_machine(phydev); + + /* Cannot call flush_scheduled_work() here as desired because + * of rtnl_lock(), but PHY_HALTED shall guarantee irq handler + * will not reenable interrupts. + */ +} +EXPORT_SYMBOL(phy_stop); + +/** + * phy_start - start or restart a PHY device + * @phydev: target phy_device struct + * + * Description: Indicates the attached device's readiness to + * handle PHY-related work. Used during startup to start the + * PHY, and after a call to phy_stop() to resume operation. + * Also used to indicate the MDIO bus has cleared an error + * condition. + */ +void phy_start(struct phy_device *phydev) +{ + mutex_lock(&phydev->lock); + + if (phydev->state != PHY_READY && phydev->state != PHY_HALTED) { + WARN(1, "called from state %s\n", + phy_state_to_str(phydev->state)); + goto out; + } + + if (phydev->sfp_bus) + sfp_upstream_start(phydev->sfp_bus); + + /* if phy was suspended, bring the physical link up again */ + __phy_resume(phydev); + + phydev->state = PHY_UP; + + phy_start_machine(phydev); +out: + mutex_unlock(&phydev->lock); +} +EXPORT_SYMBOL(phy_start); + +/** + * phy_state_machine - Handle the state machine + * @work: work_struct that describes the work to be done + */ +void phy_state_machine(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct phy_device *phydev = + container_of(dwork, struct phy_device, state_queue); + struct net_device *dev = phydev->attached_dev; + bool needs_aneg = false, do_suspend = false; + enum phy_state old_state; + bool finished = false; + int err = 0; + + mutex_lock(&phydev->lock); + + old_state = phydev->state; + + switch (phydev->state) { + case PHY_DOWN: + case PHY_READY: + break; + case PHY_UP: + needs_aneg = true; + + break; + case PHY_NOLINK: + case PHY_RUNNING: + err = phy_check_link_status(phydev); + break; + case PHY_CABLETEST: + err = phydev->drv->cable_test_get_status(phydev, &finished); + if (err) { + phy_abort_cable_test(phydev); + netif_testing_off(dev); + needs_aneg = true; + phydev->state = PHY_UP; + break; + } + + if (finished) { + ethnl_cable_test_finished(phydev); + netif_testing_off(dev); + needs_aneg = true; + phydev->state = PHY_UP; + } + break; + case PHY_HALTED: + if (phydev->link) { + phydev->link = 0; + phy_link_down(phydev); + } + do_suspend = true; + break; + } + + mutex_unlock(&phydev->lock); + + if (needs_aneg) + err = phy_start_aneg(phydev); + else if (do_suspend) + phy_suspend(phydev); + + if (err < 0) + phy_error(phydev); + + phy_process_state_change(phydev, old_state); + + /* Only re-schedule a PHY state machine change if we are polling the + * PHY, if PHY_IGNORE_INTERRUPT is set, then we will be moving + * between states from phy_mac_interrupt(). + * + * In state PHY_HALTED the PHY gets suspended, so rescheduling the + * state machine would be pointless and possibly error prone when + * called from phy_disconnect() synchronously. + */ + mutex_lock(&phydev->lock); + if (phy_polling_mode(phydev) && phy_is_started(phydev)) + phy_queue_state_machine(phydev, PHY_STATE_TIME); + mutex_unlock(&phydev->lock); +} + +/** + * phy_mac_interrupt - MAC says the link has changed + * @phydev: phy_device struct with changed link + * + * The MAC layer is able to indicate there has been a change in the PHY link + * status. Trigger the state machine and work a work queue. + */ +void phy_mac_interrupt(struct phy_device *phydev) +{ + /* Trigger a state machine change */ + phy_trigger_machine(phydev); +} +EXPORT_SYMBOL(phy_mac_interrupt); + +static void mmd_eee_adv_to_linkmode(unsigned long *advertising, u16 eee_adv) +{ + linkmode_zero(advertising); + + if (eee_adv & MDIO_EEE_100TX) + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, + advertising); + if (eee_adv & MDIO_EEE_1000T) + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + advertising); + if (eee_adv & MDIO_EEE_10GT) + linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, + advertising); + if (eee_adv & MDIO_EEE_1000KX) + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, + advertising); + if (eee_adv & MDIO_EEE_10GKX4) + linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, + advertising); + if (eee_adv & MDIO_EEE_10GKR) + linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, + advertising); +} + +/** + * phy_init_eee - init and check the EEE feature + * @phydev: target phy_device struct + * @clk_stop_enable: PHY may stop the clock during LPI + * + * Description: it checks if the Energy-Efficient Ethernet (EEE) + * is supported by looking at the MMD registers 3.20 and 7.60/61 + * and it programs the MMD register 3.0 setting the "Clock stop enable" + * bit if required. + */ +int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) +{ + if (!phydev->drv) + return -EIO; + + /* According to 802.3az,the EEE is supported only in full duplex-mode. + */ + if (phydev->duplex == DUPLEX_FULL) { + __ETHTOOL_DECLARE_LINK_MODE_MASK(common); + __ETHTOOL_DECLARE_LINK_MODE_MASK(lp); + __ETHTOOL_DECLARE_LINK_MODE_MASK(adv); + int eee_lp, eee_cap, eee_adv; + int status; + u32 cap; + + /* Read phy status to properly get the right settings */ + status = phy_read_status(phydev); + if (status) + return status; + + /* First check if the EEE ability is supported */ + eee_cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE); + if (eee_cap <= 0) + goto eee_exit_err; + + cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap); + if (!cap) + goto eee_exit_err; + + /* Check which link settings negotiated and verify it in + * the EEE advertising registers. + */ + eee_lp = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE); + if (eee_lp <= 0) + goto eee_exit_err; + + eee_adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV); + if (eee_adv <= 0) + goto eee_exit_err; + + mmd_eee_adv_to_linkmode(adv, eee_adv); + mmd_eee_adv_to_linkmode(lp, eee_lp); + linkmode_and(common, adv, lp); + + if (!phy_check_valid(phydev->speed, phydev->duplex, common)) + goto eee_exit_err; + + if (clk_stop_enable) + /* Configure the PHY to stop receiving xMII + * clock while it is signaling LPI. + */ + phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, + MDIO_PCS_CTRL1_CLKSTOP_EN); + + return 0; /* EEE supported */ + } +eee_exit_err: + return -EPROTONOSUPPORT; +} +EXPORT_SYMBOL(phy_init_eee); + +/** + * phy_get_eee_err - report the EEE wake error count + * @phydev: target phy_device struct + * + * Description: it is to report the number of time where the PHY + * failed to complete its normal wake sequence. + */ +int phy_get_eee_err(struct phy_device *phydev) +{ + if (!phydev->drv) + return -EIO; + + return phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR); +} +EXPORT_SYMBOL(phy_get_eee_err); + +/** + * phy_ethtool_get_eee - get EEE supported and status + * @phydev: target phy_device struct + * @data: ethtool_eee data + * + * Description: it reportes the Supported/Advertisement/LP Advertisement + * capabilities. + */ +int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data) +{ + int val; + + if (!phydev->drv) + return -EIO; + + /* Get Supported EEE */ + val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE); + if (val < 0) + return val; + data->supported = mmd_eee_cap_to_ethtool_sup_t(val); + + /* Get advertisement EEE */ + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV); + if (val < 0) + return val; + data->advertised = mmd_eee_adv_to_ethtool_adv_t(val); + data->eee_enabled = !!data->advertised; + + /* Get LP advertisement EEE */ + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE); + if (val < 0) + return val; + data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val); + + data->eee_active = !!(data->advertised & data->lp_advertised); + + return 0; +} +EXPORT_SYMBOL(phy_ethtool_get_eee); + +/** + * phy_ethtool_set_eee - set EEE supported and status + * @phydev: target phy_device struct + * @data: ethtool_eee data + * + * Description: it is to program the Advertisement EEE register. + */ +int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data) +{ + int cap, old_adv, adv = 0, ret; + + if (!phydev->drv) + return -EIO; + + /* Get Supported EEE */ + cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE); + if (cap < 0) + return cap; + + old_adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV); + if (old_adv < 0) + return old_adv; + + if (data->eee_enabled) { + adv = !data->advertised ? cap : + ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap; + /* Mask prohibited EEE modes */ + adv &= ~phydev->eee_broken_modes; + } + + if (old_adv != adv) { + ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv); + if (ret < 0) + return ret; + + /* Restart autonegotiation so the new modes get sent to the + * link partner. + */ + if (phydev->autoneg == AUTONEG_ENABLE) { + ret = phy_restart_aneg(phydev); + if (ret < 0) + return ret; + } + } + + return 0; +} +EXPORT_SYMBOL(phy_ethtool_set_eee); + +/** + * phy_ethtool_set_wol - Configure Wake On LAN + * + * @phydev: target phy_device struct + * @wol: Configuration requested + */ +int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) +{ + if (phydev->drv && phydev->drv->set_wol) + return phydev->drv->set_wol(phydev, wol); + + return -EOPNOTSUPP; +} +EXPORT_SYMBOL(phy_ethtool_set_wol); + +/** + * phy_ethtool_get_wol - Get the current Wake On LAN configuration + * + * @phydev: target phy_device struct + * @wol: Store the current configuration here + */ +void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) +{ + if (phydev->drv && phydev->drv->get_wol) + phydev->drv->get_wol(phydev, wol); +} +EXPORT_SYMBOL(phy_ethtool_get_wol); + +int phy_ethtool_get_link_ksettings(struct net_device *ndev, + struct ethtool_link_ksettings *cmd) +{ + struct phy_device *phydev = ndev->phydev; + + if (!phydev) + return -ENODEV; + + phy_ethtool_ksettings_get(phydev, cmd); + + return 0; +} +EXPORT_SYMBOL(phy_ethtool_get_link_ksettings); + +int phy_ethtool_set_link_ksettings(struct net_device *ndev, + const struct ethtool_link_ksettings *cmd) +{ + struct phy_device *phydev = ndev->phydev; + + if (!phydev) + return -ENODEV; + + return phy_ethtool_ksettings_set(phydev, cmd); +} +EXPORT_SYMBOL(phy_ethtool_set_link_ksettings); + +/** + * phy_ethtool_nway_reset - Restart auto negotiation + * @ndev: Network device to restart autoneg for + */ +int phy_ethtool_nway_reset(struct net_device *ndev) +{ + struct phy_device *phydev = ndev->phydev; + + if (!phydev) + return -ENODEV; + + if (!phydev->drv) + return -EIO; + + return phy_restart_aneg(phydev); +} +EXPORT_SYMBOL(phy_ethtool_nway_reset); |