1 files changed, 593 insertions, 0 deletions

diff --git a/drivers/net/wireless/broadcom/b43/phy_common.c b/drivers/net/wireless/broadcom/b43/phy_common.c
new file mode 100644
index 000000000..285490f6f
--- /dev/null
+++ b/drivers/net/wireless/broadcom/b43/phy_common.c
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+
+  Broadcom B43 wireless driver
+  Common PHY routines
+
+  Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+  Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
+  Copyright (c) 2005-2008 Michael Buesch <m@bues.ch>
+  Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
+  Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+
+*/
+
+#include "phy_common.h"
+#include "phy_g.h"
+#include "phy_a.h"
+#include "phy_n.h"
+#include "phy_lp.h"
+#include "phy_ht.h"
+#include "phy_lcn.h"
+#include "phy_ac.h"
+#include "b43.h"
+#include "main.h"
+
+
+int b43_phy_allocate(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &(dev->phy);
+	int err;
+
+	phy->ops = NULL;
+
+	switch (phy->type) {
+	case B43_PHYTYPE_G:
+#ifdef CONFIG_B43_PHY_G
+		phy->ops = &b43_phyops_g;
+#endif
+		break;
+	case B43_PHYTYPE_N:
+#ifdef CONFIG_B43_PHY_N
+		phy->ops = &b43_phyops_n;
+#endif
+		break;
+	case B43_PHYTYPE_LP:
+#ifdef CONFIG_B43_PHY_LP
+		phy->ops = &b43_phyops_lp;
+#endif
+		break;
+	case B43_PHYTYPE_HT:
+#ifdef CONFIG_B43_PHY_HT
+		phy->ops = &b43_phyops_ht;
+#endif
+		break;
+	case B43_PHYTYPE_LCN:
+#ifdef CONFIG_B43_PHY_LCN
+		phy->ops = &b43_phyops_lcn;
+#endif
+		break;
+	case B43_PHYTYPE_AC:
+#ifdef CONFIG_B43_PHY_AC
+		phy->ops = &b43_phyops_ac;
+#endif
+		break;
+	}
+	if (B43_WARN_ON(!phy->ops))
+		return -ENODEV;
+
+	err = phy->ops->allocate(dev);
+	if (err)
+		phy->ops = NULL;
+
+	return err;
+}
+
+void b43_phy_free(struct b43_wldev *dev)
+{
+	dev->phy.ops->free(dev);
+	dev->phy.ops = NULL;
+}
+
+int b43_phy_init(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &dev->phy;
+	const struct b43_phy_operations *ops = phy->ops;
+	int err;
+
+	/* During PHY init we need to use some channel. On the first init this
+	 * function is called *before* b43_op_config, so our pointer is NULL.
+	 */
+	if (!phy->chandef) {
+		phy->chandef = &dev->wl->hw->conf.chandef;
+		phy->channel = phy->chandef->chan->hw_value;
+	}
+
+	phy->ops->switch_analog(dev, true);
+	b43_software_rfkill(dev, false);
+
+	err = ops->init(dev);
+	if (err) {
+		b43err(dev->wl, "PHY init failed\n");
+		goto err_block_rf;
+	}
+	phy->do_full_init = false;
+
+	err = b43_switch_channel(dev, phy->channel);
+	if (err) {
+		b43err(dev->wl, "PHY init: Channel switch to default failed\n");
+		goto err_phy_exit;
+	}
+
+	return 0;
+
+err_phy_exit:
+	phy->do_full_init = true;
+	if (ops->exit)
+		ops->exit(dev);
+err_block_rf:
+	b43_software_rfkill(dev, true);
+
+	return err;
+}
+
+void b43_phy_exit(struct b43_wldev *dev)
+{
+	const struct b43_phy_operations *ops = dev->phy.ops;
+
+	b43_software_rfkill(dev, true);
+	dev->phy.do_full_init = true;
+	if (ops->exit)
+		ops->exit(dev);
+}
+
+bool b43_has_hardware_pctl(struct b43_wldev *dev)
+{
+	if (!dev->phy.hardware_power_control)
+		return false;
+	if (!dev->phy.ops->supports_hwpctl)
+		return false;
+	return dev->phy.ops->supports_hwpctl(dev);
+}
+
+void b43_radio_lock(struct b43_wldev *dev)
+{
+	u32 macctl;
+
+#if B43_DEBUG
+	B43_WARN_ON(dev->phy.radio_locked);
+	dev->phy.radio_locked = true;
+#endif
+
+	macctl = b43_read32(dev, B43_MMIO_MACCTL);
+	macctl |= B43_MACCTL_RADIOLOCK;
+	b43_write32(dev, B43_MMIO_MACCTL, macctl);
+	/* Commit the write and wait for the firmware
+	 * to finish any radio register access. */
+	b43_read32(dev, B43_MMIO_MACCTL);
+	udelay(10);
+}
+
+void b43_radio_unlock(struct b43_wldev *dev)
+{
+	u32 macctl;
+
+#if B43_DEBUG
+	B43_WARN_ON(!dev->phy.radio_locked);
+	dev->phy.radio_locked = false;
+#endif
+
+	/* Commit any write */
+	b43_read16(dev, B43_MMIO_PHY_VER);
+	/* unlock */
+	macctl = b43_read32(dev, B43_MMIO_MACCTL);
+	macctl &= ~B43_MACCTL_RADIOLOCK;
+	b43_write32(dev, B43_MMIO_MACCTL, macctl);
+}
+
+void b43_phy_lock(struct b43_wldev *dev)
+{
+#if B43_DEBUG
+	B43_WARN_ON(dev->phy.phy_locked);
+	dev->phy.phy_locked = true;
+#endif
+	B43_WARN_ON(dev->dev->core_rev < 3);
+
+	if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
+		b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
+}
+
+void b43_phy_unlock(struct b43_wldev *dev)
+{
+#if B43_DEBUG
+	B43_WARN_ON(!dev->phy.phy_locked);
+	dev->phy.phy_locked = false;
+#endif
+	B43_WARN_ON(dev->dev->core_rev < 3);
+
+	if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
+		b43_power_saving_ctl_bits(dev, 0);
+}
+
+static inline void assert_mac_suspended(struct b43_wldev *dev)
+{
+	if (!B43_DEBUG)
+		return;
+	if ((b43_status(dev) >= B43_STAT_INITIALIZED) &&
+	    (dev->mac_suspended <= 0)) {
+		b43dbg(dev->wl, "PHY/RADIO register access with "
+		       "enabled MAC.\n");
+		dump_stack();
+	}
+}
+
+u16 b43_radio_read(struct b43_wldev *dev, u16 reg)
+{
+	assert_mac_suspended(dev);
+	dev->phy.writes_counter = 0;
+	return dev->phy.ops->radio_read(dev, reg);
+}
+
+void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+	assert_mac_suspended(dev);
+	if (b43_bus_host_is_pci(dev->dev) &&
+	    ++dev->phy.writes_counter > B43_MAX_WRITES_IN_ROW) {
+		b43_read32(dev, B43_MMIO_MACCTL);
+		dev->phy.writes_counter = 1;
+	}
+	dev->phy.ops->radio_write(dev, reg, value);
+}
+
+void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask)
+{
+	b43_radio_write16(dev, offset,
+			  b43_radio_read16(dev, offset) & mask);
+}
+
+void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set)
+{
+	b43_radio_write16(dev, offset,
+			  b43_radio_read16(dev, offset) | set);
+}
+
+void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
+{
+	b43_radio_write16(dev, offset,
+			  (b43_radio_read16(dev, offset) & mask) | set);
+}
+
+bool b43_radio_wait_value(struct b43_wldev *dev, u16 offset, u16 mask,
+			  u16 value, int delay, int timeout)
+{
+	u16 val;
+	int i;
+
+	for (i = 0; i < timeout; i += delay) {
+		val = b43_radio_read(dev, offset);
+		if ((val & mask) == value)
+			return true;
+		udelay(delay);
+	}
+	return false;
+}
+
+u16 b43_phy_read(struct b43_wldev *dev, u16 reg)
+{
+	assert_mac_suspended(dev);
+	dev->phy.writes_counter = 0;
+
+	if (dev->phy.ops->phy_read)
+		return dev->phy.ops->phy_read(dev, reg);
+
+	b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
+	return b43_read16(dev, B43_MMIO_PHY_DATA);
+}
+
+void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+	assert_mac_suspended(dev);
+	if (b43_bus_host_is_pci(dev->dev) &&
+	    ++dev->phy.writes_counter > B43_MAX_WRITES_IN_ROW) {
+		b43_read16(dev, B43_MMIO_PHY_VER);
+		dev->phy.writes_counter = 1;
+	}
+
+	if (dev->phy.ops->phy_write)
+		return dev->phy.ops->phy_write(dev, reg, value);
+
+	b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
+	b43_write16(dev, B43_MMIO_PHY_DATA, value);
+}
+
+void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)
+{
+	b43_phy_write(dev, destreg, b43_phy_read(dev, srcreg));
+}
+
+void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
+{
+	if (dev->phy.ops->phy_maskset) {
+		assert_mac_suspended(dev);
+		dev->phy.ops->phy_maskset(dev, offset, mask, 0);
+	} else {
+		b43_phy_write(dev, offset,
+			      b43_phy_read(dev, offset) & mask);
+	}
+}
+
+void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set)
+{
+	if (dev->phy.ops->phy_maskset) {
+		assert_mac_suspended(dev);
+		dev->phy.ops->phy_maskset(dev, offset, 0xFFFF, set);
+	} else {
+		b43_phy_write(dev, offset,
+			      b43_phy_read(dev, offset) | set);
+	}
+}
+
+void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
+{
+	if (dev->phy.ops->phy_maskset) {
+		assert_mac_suspended(dev);
+		dev->phy.ops->phy_maskset(dev, offset, mask, set);
+	} else {
+		b43_phy_write(dev, offset,
+			      (b43_phy_read(dev, offset) & mask) | set);
+	}
+}
+
+void b43_phy_put_into_reset(struct b43_wldev *dev)
+{
+	u32 tmp;
+
+	switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+	case B43_BUS_BCMA:
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp &= ~B43_BCMA_IOCTL_GMODE;
+		tmp |= B43_BCMA_IOCTL_PHY_RESET;
+		tmp |= BCMA_IOCTL_FGC;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		udelay(1);
+
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp &= ~BCMA_IOCTL_FGC;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		udelay(1);
+		break;
+#endif
+#ifdef CONFIG_B43_SSB
+	case B43_BUS_SSB:
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+		tmp &= ~B43_TMSLOW_GMODE;
+		tmp |= B43_TMSLOW_PHYRESET;
+		tmp |= SSB_TMSLOW_FGC;
+		ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+		usleep_range(1000, 2000);
+
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+		tmp &= ~SSB_TMSLOW_FGC;
+		ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+		usleep_range(1000, 2000);
+
+		break;
+#endif
+	}
+}
+
+void b43_phy_take_out_of_reset(struct b43_wldev *dev)
+{
+	u32 tmp;
+
+	switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+	case B43_BUS_BCMA:
+		/* Unset reset bit (with forcing clock) */
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp &= ~B43_BCMA_IOCTL_PHY_RESET;
+		tmp &= ~B43_BCMA_IOCTL_PHY_CLKEN;
+		tmp |= BCMA_IOCTL_FGC;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		udelay(1);
+
+		/* Do not force clock anymore */
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp &= ~BCMA_IOCTL_FGC;
+		tmp |= B43_BCMA_IOCTL_PHY_CLKEN;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		udelay(1);
+		break;
+#endif
+#ifdef CONFIG_B43_SSB
+	case B43_BUS_SSB:
+		/* Unset reset bit (with forcing clock) */
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+		tmp &= ~B43_TMSLOW_PHYRESET;
+		tmp &= ~B43_TMSLOW_PHYCLKEN;
+		tmp |= SSB_TMSLOW_FGC;
+		ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+		ssb_read32(dev->dev->sdev, SSB_TMSLOW); /* flush */
+		usleep_range(1000, 2000);
+
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+		tmp &= ~SSB_TMSLOW_FGC;
+		tmp |= B43_TMSLOW_PHYCLKEN;
+		ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+		ssb_read32(dev->dev->sdev, SSB_TMSLOW); /* flush */
+		usleep_range(1000, 2000);
+		break;
+#endif
+	}
+}
+
+int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
+{
+	struct b43_phy *phy = &(dev->phy);
+	u16 channelcookie, savedcookie;
+	int err;
+
+	/* First we set the channel radio code to prevent the
+	 * firmware from sending ghost packets.
+	 */
+	channelcookie = new_channel;
+	if (b43_current_band(dev->wl) == NL80211_BAND_5GHZ)
+		channelcookie |= B43_SHM_SH_CHAN_5GHZ;
+	/* FIXME: set 40Mhz flag if required */
+	if (0)
+		channelcookie |= B43_SHM_SH_CHAN_40MHZ;
+	savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN);
+	b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie);
+
+	/* Now try to switch the PHY hardware channel. */
+	err = phy->ops->switch_channel(dev, new_channel);
+	if (err)
+		goto err_restore_cookie;
+
+	/* Wait for the radio to tune to the channel and stabilize. */
+	msleep(8);
+
+	return 0;
+
+err_restore_cookie:
+	b43_shm_write16(dev, B43_SHM_SHARED,
+			B43_SHM_SH_CHAN, savedcookie);
+
+	return err;
+}
+
+void b43_software_rfkill(struct b43_wldev *dev, bool blocked)
+{
+	struct b43_phy *phy = &dev->phy;
+
+	b43_mac_suspend(dev);
+	phy->ops->software_rfkill(dev, blocked);
+	phy->radio_on = !blocked;
+	b43_mac_enable(dev);
+}
+
+/*
+ * b43_phy_txpower_adjust_work - TX power workqueue.
+ *
+ * Workqueue for updating the TX power parameters in hardware.
+ */
+void b43_phy_txpower_adjust_work(struct work_struct *work)
+{
+	struct b43_wl *wl = container_of(work, struct b43_wl,
+					 txpower_adjust_work);
+	struct b43_wldev *dev;
+
+	mutex_lock(&wl->mutex);
+	dev = wl->current_dev;
+
+	if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED)))
+		dev->phy.ops->adjust_txpower(dev);
+
+	mutex_unlock(&wl->mutex);
+}
+
+void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags)
+{
+	struct b43_phy *phy = &dev->phy;
+	unsigned long now = jiffies;
+	enum b43_txpwr_result result;
+
+	if (!(flags & B43_TXPWR_IGNORE_TIME)) {
+		/* Check if it's time for a TXpower check. */
+		if (time_before(now, phy->next_txpwr_check_time))
+			return; /* Not yet */
+	}
+	/* The next check will be needed in two seconds, or later. */
+	phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2));
+
+	if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) &&
+	    (dev->dev->board_type == SSB_BOARD_BU4306))
+		return; /* No software txpower adjustment needed */
+
+	result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI));
+	if (result == B43_TXPWR_RES_DONE)
+		return; /* We are done. */
+	B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST);
+	B43_WARN_ON(phy->ops->adjust_txpower == NULL);
+
+	/* We must adjust the transmission power in hardware.
+	 * Schedule b43_phy_txpower_adjust_work(). */
+	ieee80211_queue_work(dev->wl->hw, &dev->wl->txpower_adjust_work);
+}
+
+int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset)
+{
+	const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK);
+	unsigned int a, b, c, d;
+	unsigned int average;
+	u32 tmp;
+
+	tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset);
+	a = tmp & 0xFF;
+	b = (tmp >> 8) & 0xFF;
+	c = (tmp >> 16) & 0xFF;
+	d = (tmp >> 24) & 0xFF;
+	if (a == 0 || a == B43_TSSI_MAX ||
+	    b == 0 || b == B43_TSSI_MAX ||
+	    c == 0 || c == B43_TSSI_MAX ||
+	    d == 0 || d == B43_TSSI_MAX)
+		return -ENOENT;
+	/* The values are OK. Clear them. */
+	tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) |
+	      (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24);
+	b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp);
+
+	if (is_ofdm) {
+		a = (a + 32) & 0x3F;
+		b = (b + 32) & 0x3F;
+		c = (c + 32) & 0x3F;
+		d = (d + 32) & 0x3F;
+	}
+
+	/* Get the average of the values with 0.5 added to each value. */
+	average = (a + b + c + d + 2) / 4;
+	if (is_ofdm) {
+		/* Adjust for CCK-boost */
+		if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF1)
+		    & B43_HF_CCKBOOST)
+			average = (average >= 13) ? (average - 13) : 0;
+	}
+
+	return average;
+}
+
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
+{
+	b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
+}
+
+
+bool b43_is_40mhz(struct b43_wldev *dev)
+{
+	return dev->phy.chandef->width == NL80211_CHAN_WIDTH_40;
+}
+
+/* https://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
+void b43_phy_force_clock(struct b43_wldev *dev, bool force)
+{
+	u32 tmp;
+
+	WARN_ON(dev->phy.type != B43_PHYTYPE_N &&
+		dev->phy.type != B43_PHYTYPE_HT &&
+		dev->phy.type != B43_PHYTYPE_AC);
+
+	switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+	case B43_BUS_BCMA:
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		if (force)
+			tmp |= BCMA_IOCTL_FGC;
+		else
+			tmp &= ~BCMA_IOCTL_FGC;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		break;
+#endif
+#ifdef CONFIG_B43_SSB
+	case B43_BUS_SSB:
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+		if (force)
+			tmp |= SSB_TMSLOW_FGC;
+		else
+			tmp &= ~SSB_TMSLOW_FGC;
+		ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+		break;
+#endif
+	}
+}