diff options
Diffstat (limited to 'drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c')
| -rw-r--r-- | drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c | 873 |
1 files changed, 873 insertions, 0 deletions
diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c b/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c new file mode 100644 index 000000000..92e7f2602 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c @@ -0,0 +1,873 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, Sony Mobile Communications AB. + * Copyright (c) 2013, The Linux Foundation. All rights reserved. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/slab.h> +#include <linux/regmap.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> + +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> + +#include "../core.h" +#include "../pinctrl-utils.h" + +/* MPP registers */ +#define SSBI_REG_ADDR_MPP_BASE 0x50 +#define SSBI_REG_ADDR_MPP(n) (SSBI_REG_ADDR_MPP_BASE + n) + +/* MPP Type: type */ +#define PM8XXX_MPP_TYPE_D_INPUT 0 +#define PM8XXX_MPP_TYPE_D_OUTPUT 1 +#define PM8XXX_MPP_TYPE_D_BI_DIR 2 +#define PM8XXX_MPP_TYPE_A_INPUT 3 +#define PM8XXX_MPP_TYPE_A_OUTPUT 4 +#define PM8XXX_MPP_TYPE_SINK 5 +#define PM8XXX_MPP_TYPE_DTEST_SINK 6 +#define PM8XXX_MPP_TYPE_DTEST_OUTPUT 7 + +/* Digital Input: control */ +#define PM8XXX_MPP_DIN_TO_INT 0 +#define PM8XXX_MPP_DIN_TO_DBUS1 1 +#define PM8XXX_MPP_DIN_TO_DBUS2 2 +#define PM8XXX_MPP_DIN_TO_DBUS3 3 + +/* Digital Output: control */ +#define PM8XXX_MPP_DOUT_CTRL_LOW 0 +#define PM8XXX_MPP_DOUT_CTRL_HIGH 1 +#define PM8XXX_MPP_DOUT_CTRL_MPP 2 +#define PM8XXX_MPP_DOUT_CTRL_INV_MPP 3 + +/* Bidirectional: control */ +#define PM8XXX_MPP_BI_PULLUP_1KOHM 0 +#define PM8XXX_MPP_BI_PULLUP_OPEN 1 +#define PM8XXX_MPP_BI_PULLUP_10KOHM 2 +#define PM8XXX_MPP_BI_PULLUP_30KOHM 3 + +/* Analog Output: control */ +#define PM8XXX_MPP_AOUT_CTRL_DISABLE 0 +#define PM8XXX_MPP_AOUT_CTRL_ENABLE 1 +#define PM8XXX_MPP_AOUT_CTRL_MPP_HIGH_EN 2 +#define PM8XXX_MPP_AOUT_CTRL_MPP_LOW_EN 3 + +/* Current Sink: control */ +#define PM8XXX_MPP_CS_CTRL_DISABLE 0 +#define PM8XXX_MPP_CS_CTRL_ENABLE 1 +#define PM8XXX_MPP_CS_CTRL_MPP_HIGH_EN 2 +#define PM8XXX_MPP_CS_CTRL_MPP_LOW_EN 3 + +/* DTEST Current Sink: control */ +#define PM8XXX_MPP_DTEST_CS_CTRL_EN1 0 +#define PM8XXX_MPP_DTEST_CS_CTRL_EN2 1 +#define PM8XXX_MPP_DTEST_CS_CTRL_EN3 2 +#define PM8XXX_MPP_DTEST_CS_CTRL_EN4 3 + +/* DTEST Digital Output: control */ +#define PM8XXX_MPP_DTEST_DBUS1 0 +#define PM8XXX_MPP_DTEST_DBUS2 1 +#define PM8XXX_MPP_DTEST_DBUS3 2 +#define PM8XXX_MPP_DTEST_DBUS4 3 + +/* custom pinconf parameters */ +#define PM8XXX_CONFIG_AMUX (PIN_CONFIG_END + 1) +#define PM8XXX_CONFIG_DTEST_SELECTOR (PIN_CONFIG_END + 2) +#define PM8XXX_CONFIG_ALEVEL (PIN_CONFIG_END + 3) +#define PM8XXX_CONFIG_PAIRED (PIN_CONFIG_END + 4) + +/** + * struct pm8xxx_pin_data - dynamic configuration for a pin + * @reg: address of the control register + * @irq: IRQ from the PMIC interrupt controller + * @mode: operating mode for the pin (digital, analog or current sink) + * @input: pin is input + * @output: pin is output + * @high_z: pin is floating + * @paired: mpp operates in paired mode + * @output_value: logical output value of the mpp + * @power_source: selected power source + * @dtest: DTEST route selector + * @amux: input muxing in analog mode + * @aout_level: selector of the output in analog mode + * @drive_strength: drive strength of the current sink + * @pullup: pull up value, when in digital bidirectional mode + */ +struct pm8xxx_pin_data { + unsigned reg; + int irq; + + u8 mode; + + bool input; + bool output; + bool high_z; + bool paired; + bool output_value; + + u8 power_source; + u8 dtest; + u8 amux; + u8 aout_level; + u8 drive_strength; + unsigned pullup; +}; + +struct pm8xxx_mpp { + struct device *dev; + struct regmap *regmap; + struct pinctrl_dev *pctrl; + struct gpio_chip chip; + + struct pinctrl_desc desc; + unsigned npins; +}; + +static const struct pinconf_generic_params pm8xxx_mpp_bindings[] = { + {"qcom,amux-route", PM8XXX_CONFIG_AMUX, 0}, + {"qcom,analog-level", PM8XXX_CONFIG_ALEVEL, 0}, + {"qcom,dtest", PM8XXX_CONFIG_DTEST_SELECTOR, 0}, + {"qcom,paired", PM8XXX_CONFIG_PAIRED, 0}, +}; + +#ifdef CONFIG_DEBUG_FS +static const struct pin_config_item pm8xxx_conf_items[] = { + PCONFDUMP(PM8XXX_CONFIG_AMUX, "analog mux", NULL, true), + PCONFDUMP(PM8XXX_CONFIG_ALEVEL, "analog level", NULL, true), + PCONFDUMP(PM8XXX_CONFIG_DTEST_SELECTOR, "dtest", NULL, true), + PCONFDUMP(PM8XXX_CONFIG_PAIRED, "paired", NULL, false), +}; +#endif + +#define PM8XXX_MAX_MPPS 12 +static const char * const pm8xxx_groups[PM8XXX_MAX_MPPS] = { + "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11", "mpp12", +}; + +#define PM8XXX_MPP_DIGITAL 0 +#define PM8XXX_MPP_ANALOG 1 +#define PM8XXX_MPP_SINK 2 + +static const char * const pm8xxx_mpp_functions[] = { + "digital", "analog", "sink", +}; + +static int pm8xxx_mpp_update(struct pm8xxx_mpp *pctrl, + struct pm8xxx_pin_data *pin) +{ + unsigned level; + unsigned ctrl; + unsigned type; + int ret; + u8 val; + + switch (pin->mode) { + case PM8XXX_MPP_DIGITAL: + if (pin->dtest) { + type = PM8XXX_MPP_TYPE_DTEST_OUTPUT; + ctrl = pin->dtest - 1; + } else if (pin->input && pin->output) { + type = PM8XXX_MPP_TYPE_D_BI_DIR; + if (pin->high_z) + ctrl = PM8XXX_MPP_BI_PULLUP_OPEN; + else if (pin->pullup == 600) + ctrl = PM8XXX_MPP_BI_PULLUP_1KOHM; + else if (pin->pullup == 10000) + ctrl = PM8XXX_MPP_BI_PULLUP_10KOHM; + else + ctrl = PM8XXX_MPP_BI_PULLUP_30KOHM; + } else if (pin->input) { + type = PM8XXX_MPP_TYPE_D_INPUT; + if (pin->dtest) + ctrl = pin->dtest; + else + ctrl = PM8XXX_MPP_DIN_TO_INT; + } else { + type = PM8XXX_MPP_TYPE_D_OUTPUT; + ctrl = !!pin->output_value; + if (pin->paired) + ctrl |= BIT(1); + } + + level = pin->power_source; + break; + case PM8XXX_MPP_ANALOG: + if (pin->output) { + type = PM8XXX_MPP_TYPE_A_OUTPUT; + level = pin->aout_level; + ctrl = pin->output_value; + if (pin->paired) + ctrl |= BIT(1); + } else { + type = PM8XXX_MPP_TYPE_A_INPUT; + level = pin->amux; + ctrl = 0; + } + break; + case PM8XXX_MPP_SINK: + level = (pin->drive_strength / 5) - 1; + if (pin->dtest) { + type = PM8XXX_MPP_TYPE_DTEST_SINK; + ctrl = pin->dtest - 1; + } else { + type = PM8XXX_MPP_TYPE_SINK; + ctrl = pin->output_value; + if (pin->paired) + ctrl |= BIT(1); + } + break; + default: + return -EINVAL; + } + + val = type << 5 | level << 2 | ctrl; + ret = regmap_write(pctrl->regmap, pin->reg, val); + if (ret) + dev_err(pctrl->dev, "failed to write register\n"); + + return ret; +} + +static int pm8xxx_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); + + return pctrl->npins; +} + +static const char *pm8xxx_get_group_name(struct pinctrl_dev *pctldev, + unsigned group) +{ + return pm8xxx_groups[group]; +} + + +static int pm8xxx_get_group_pins(struct pinctrl_dev *pctldev, + unsigned group, + const unsigned **pins, + unsigned *num_pins) +{ + struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); + + *pins = &pctrl->desc.pins[group].number; + *num_pins = 1; + + return 0; +} + +static const struct pinctrl_ops pm8xxx_pinctrl_ops = { + .get_groups_count = pm8xxx_get_groups_count, + .get_group_name = pm8xxx_get_group_name, + .get_group_pins = pm8xxx_get_group_pins, + .dt_node_to_map = pinconf_generic_dt_node_to_map_group, + .dt_free_map = pinctrl_utils_free_map, +}; + +static int pm8xxx_get_functions_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(pm8xxx_mpp_functions); +} + +static const char *pm8xxx_get_function_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + return pm8xxx_mpp_functions[function]; +} + +static int pm8xxx_get_function_groups(struct pinctrl_dev *pctldev, + unsigned function, + const char * const **groups, + unsigned * const num_groups) +{ + struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); + + *groups = pm8xxx_groups; + *num_groups = pctrl->npins; + return 0; +} + +static int pm8xxx_pinmux_set_mux(struct pinctrl_dev *pctldev, + unsigned function, + unsigned group) +{ + struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pm8xxx_pin_data *pin = pctrl->desc.pins[group].drv_data; + + pin->mode = function; + pm8xxx_mpp_update(pctrl, pin); + + return 0; +} + +static const struct pinmux_ops pm8xxx_pinmux_ops = { + .get_functions_count = pm8xxx_get_functions_count, + .get_function_name = pm8xxx_get_function_name, + .get_function_groups = pm8xxx_get_function_groups, + .set_mux = pm8xxx_pinmux_set_mux, +}; + +static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev, + unsigned int offset, + unsigned long *config) +{ + struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; + unsigned param = pinconf_to_config_param(*config); + unsigned arg; + + switch (param) { + case PIN_CONFIG_BIAS_PULL_UP: + arg = pin->pullup; + break; + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + arg = pin->high_z; + break; + case PIN_CONFIG_INPUT_ENABLE: + arg = pin->input; + break; + case PIN_CONFIG_OUTPUT: + arg = pin->output_value; + break; + case PIN_CONFIG_POWER_SOURCE: + arg = pin->power_source; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + arg = pin->drive_strength; + break; + case PM8XXX_CONFIG_DTEST_SELECTOR: + arg = pin->dtest; + break; + case PM8XXX_CONFIG_AMUX: + arg = pin->amux; + break; + case PM8XXX_CONFIG_ALEVEL: + arg = pin->aout_level; + break; + case PM8XXX_CONFIG_PAIRED: + arg = pin->paired; + break; + default: + return -EINVAL; + } + + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev, + unsigned int offset, + unsigned long *configs, + unsigned num_configs) +{ + struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; + unsigned param; + unsigned arg; + unsigned i; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_BIAS_PULL_UP: + pin->pullup = arg; + break; + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + pin->high_z = true; + break; + case PIN_CONFIG_INPUT_ENABLE: + pin->input = true; + break; + case PIN_CONFIG_OUTPUT: + pin->output = true; + pin->output_value = !!arg; + break; + case PIN_CONFIG_POWER_SOURCE: + pin->power_source = arg; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + pin->drive_strength = arg; + break; + case PM8XXX_CONFIG_DTEST_SELECTOR: + pin->dtest = arg; + break; + case PM8XXX_CONFIG_AMUX: + pin->amux = arg; + break; + case PM8XXX_CONFIG_ALEVEL: + pin->aout_level = arg; + break; + case PM8XXX_CONFIG_PAIRED: + pin->paired = !!arg; + break; + default: + dev_err(pctrl->dev, + "unsupported config parameter: %x\n", + param); + return -EINVAL; + } + } + + pm8xxx_mpp_update(pctrl, pin); + + return 0; +} + +static const struct pinconf_ops pm8xxx_pinconf_ops = { + .is_generic = true, + .pin_config_group_get = pm8xxx_pin_config_get, + .pin_config_group_set = pm8xxx_pin_config_set, +}; + +static const struct pinctrl_desc pm8xxx_pinctrl_desc = { + .name = "pm8xxx_mpp", + .pctlops = &pm8xxx_pinctrl_ops, + .pmxops = &pm8xxx_pinmux_ops, + .confops = &pm8xxx_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int pm8xxx_mpp_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); + struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; + + switch (pin->mode) { + case PM8XXX_MPP_DIGITAL: + pin->input = true; + break; + case PM8XXX_MPP_ANALOG: + pin->input = true; + pin->output = true; + break; + case PM8XXX_MPP_SINK: + return -EINVAL; + } + + pm8xxx_mpp_update(pctrl, pin); + + return 0; +} + +static int pm8xxx_mpp_direction_output(struct gpio_chip *chip, + unsigned offset, + int value) +{ + struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); + struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; + + switch (pin->mode) { + case PM8XXX_MPP_DIGITAL: + pin->output = true; + break; + case PM8XXX_MPP_ANALOG: + pin->input = false; + pin->output = true; + break; + case PM8XXX_MPP_SINK: + pin->input = false; + pin->output = true; + break; + } + + pm8xxx_mpp_update(pctrl, pin); + + return 0; +} + +static int pm8xxx_mpp_get(struct gpio_chip *chip, unsigned offset) +{ + struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); + struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; + bool state; + int ret; + + if (!pin->input) + return !!pin->output_value; + + ret = irq_get_irqchip_state(pin->irq, IRQCHIP_STATE_LINE_LEVEL, &state); + if (!ret) + ret = !!state; + + return ret; +} + +static void pm8xxx_mpp_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); + struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; + + pin->output_value = !!value; + + pm8xxx_mpp_update(pctrl, pin); +} + +static int pm8xxx_mpp_of_xlate(struct gpio_chip *chip, + const struct of_phandle_args *gpio_desc, + u32 *flags) +{ + if (chip->of_gpio_n_cells < 2) + return -EINVAL; + + if (flags) + *flags = gpio_desc->args[1]; + + return gpio_desc->args[0] - 1; +} + + +static int pm8xxx_mpp_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); + struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; + + return pin->irq; +} + +#ifdef CONFIG_DEBUG_FS +#include <linux/seq_file.h> + +static void pm8xxx_mpp_dbg_show_one(struct seq_file *s, + struct pinctrl_dev *pctldev, + struct gpio_chip *chip, + unsigned offset, + unsigned gpio) +{ + struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); + struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; + + static const char * const aout_lvls[] = { + "1v25", "1v25_2", "0v625", "0v3125", "mpp", "abus1", "abus2", + "abus3" + }; + + static const char * const amuxs[] = { + "amux5", "amux6", "amux7", "amux8", "amux9", "abus1", "abus2", + "abus3", + }; + + seq_printf(s, " mpp%-2d:", offset + 1); + + switch (pin->mode) { + case PM8XXX_MPP_DIGITAL: + seq_puts(s, " digital "); + if (pin->dtest) { + seq_printf(s, "dtest%d\n", pin->dtest); + } else if (pin->input && pin->output) { + if (pin->high_z) + seq_puts(s, "bi-dir high-z"); + else + seq_printf(s, "bi-dir %dOhm", pin->pullup); + } else if (pin->input) { + if (pin->dtest) + seq_printf(s, "in dtest%d", pin->dtest); + else + seq_puts(s, "in gpio"); + } else if (pin->output) { + seq_puts(s, "out "); + + if (!pin->paired) { + seq_puts(s, pin->output_value ? + "high" : "low"); + } else { + seq_puts(s, pin->output_value ? + "inverted" : "follow"); + } + } + break; + case PM8XXX_MPP_ANALOG: + seq_puts(s, " analog "); + if (pin->output) { + seq_printf(s, "out %s ", aout_lvls[pin->aout_level]); + if (!pin->paired) { + seq_puts(s, pin->output_value ? + "high" : "low"); + } else { + seq_puts(s, pin->output_value ? + "inverted" : "follow"); + } + } else { + seq_printf(s, "input mux %s", amuxs[pin->amux]); + } + break; + case PM8XXX_MPP_SINK: + seq_printf(s, " sink %dmA ", pin->drive_strength); + if (pin->dtest) { + seq_printf(s, "dtest%d", pin->dtest); + } else { + if (!pin->paired) { + seq_puts(s, pin->output_value ? + "high" : "low"); + } else { + seq_puts(s, pin->output_value ? + "inverted" : "follow"); + } + } + break; + } +} + +static void pm8xxx_mpp_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + unsigned gpio = chip->base; + unsigned i; + + for (i = 0; i < chip->ngpio; i++, gpio++) { + pm8xxx_mpp_dbg_show_one(s, NULL, chip, i, gpio); + seq_puts(s, "\n"); + } +} + +#else +#define pm8xxx_mpp_dbg_show NULL +#endif + +static const struct gpio_chip pm8xxx_mpp_template = { + .direction_input = pm8xxx_mpp_direction_input, + .direction_output = pm8xxx_mpp_direction_output, + .get = pm8xxx_mpp_get, + .set = pm8xxx_mpp_set, + .of_xlate = pm8xxx_mpp_of_xlate, + .to_irq = pm8xxx_mpp_to_irq, + .dbg_show = pm8xxx_mpp_dbg_show, + .owner = THIS_MODULE, +}; + +static int pm8xxx_pin_populate(struct pm8xxx_mpp *pctrl, + struct pm8xxx_pin_data *pin) +{ + unsigned int val; + unsigned level; + unsigned ctrl; + unsigned type; + int ret; + + ret = regmap_read(pctrl->regmap, pin->reg, &val); + if (ret) { + dev_err(pctrl->dev, "failed to read register\n"); + return ret; + } + + type = (val >> 5) & 7; + level = (val >> 2) & 7; + ctrl = (val) & 3; + + switch (type) { + case PM8XXX_MPP_TYPE_D_INPUT: + pin->mode = PM8XXX_MPP_DIGITAL; + pin->input = true; + pin->power_source = level; + pin->dtest = ctrl; + break; + case PM8XXX_MPP_TYPE_D_OUTPUT: + pin->mode = PM8XXX_MPP_DIGITAL; + pin->output = true; + pin->power_source = level; + pin->output_value = !!(ctrl & BIT(0)); + pin->paired = !!(ctrl & BIT(1)); + break; + case PM8XXX_MPP_TYPE_D_BI_DIR: + pin->mode = PM8XXX_MPP_DIGITAL; + pin->input = true; + pin->output = true; + pin->power_source = level; + switch (ctrl) { + case PM8XXX_MPP_BI_PULLUP_1KOHM: + pin->pullup = 600; + break; + case PM8XXX_MPP_BI_PULLUP_OPEN: + pin->high_z = true; + break; + case PM8XXX_MPP_BI_PULLUP_10KOHM: + pin->pullup = 10000; + break; + case PM8XXX_MPP_BI_PULLUP_30KOHM: + pin->pullup = 30000; + break; + } + break; + case PM8XXX_MPP_TYPE_A_INPUT: + pin->mode = PM8XXX_MPP_ANALOG; + pin->input = true; + pin->amux = level; + break; + case PM8XXX_MPP_TYPE_A_OUTPUT: + pin->mode = PM8XXX_MPP_ANALOG; + pin->output = true; + pin->aout_level = level; + pin->output_value = !!(ctrl & BIT(0)); + pin->paired = !!(ctrl & BIT(1)); + break; + case PM8XXX_MPP_TYPE_SINK: + pin->mode = PM8XXX_MPP_SINK; + pin->drive_strength = 5 * (level + 1); + pin->output_value = !!(ctrl & BIT(0)); + pin->paired = !!(ctrl & BIT(1)); + break; + case PM8XXX_MPP_TYPE_DTEST_SINK: + pin->mode = PM8XXX_MPP_SINK; + pin->dtest = ctrl + 1; + pin->drive_strength = 5 * (level + 1); + break; + case PM8XXX_MPP_TYPE_DTEST_OUTPUT: + pin->mode = PM8XXX_MPP_DIGITAL; + pin->power_source = level; + if (ctrl >= 1) + pin->dtest = ctrl; + break; + } + + return 0; +} + +static const struct of_device_id pm8xxx_mpp_of_match[] = { + { .compatible = "qcom,pm8018-mpp" }, + { .compatible = "qcom,pm8038-mpp" }, + { .compatible = "qcom,pm8058-mpp" }, + { .compatible = "qcom,pm8917-mpp" }, + { .compatible = "qcom,pm8821-mpp" }, + { .compatible = "qcom,pm8921-mpp" }, + { .compatible = "qcom,ssbi-mpp" }, + { }, +}; +MODULE_DEVICE_TABLE(of, pm8xxx_mpp_of_match); + +static int pm8xxx_mpp_probe(struct platform_device *pdev) +{ + struct pm8xxx_pin_data *pin_data; + struct pinctrl_pin_desc *pins; + struct pm8xxx_mpp *pctrl; + int ret; + int i, npins; + + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->dev = &pdev->dev; + npins = platform_irq_count(pdev); + if (!npins) + return -EINVAL; + if (npins < 0) + return npins; + pctrl->npins = npins; + + pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!pctrl->regmap) { + dev_err(&pdev->dev, "parent regmap unavailable\n"); + return -ENXIO; + } + + pctrl->desc = pm8xxx_pinctrl_desc; + pctrl->desc.npins = pctrl->npins; + + pins = devm_kcalloc(&pdev->dev, + pctrl->desc.npins, + sizeof(struct pinctrl_pin_desc), + GFP_KERNEL); + if (!pins) + return -ENOMEM; + + pin_data = devm_kcalloc(&pdev->dev, + pctrl->desc.npins, + sizeof(struct pm8xxx_pin_data), + GFP_KERNEL); + if (!pin_data) + return -ENOMEM; + + for (i = 0; i < pctrl->desc.npins; i++) { + pin_data[i].reg = SSBI_REG_ADDR_MPP(i); + pin_data[i].irq = platform_get_irq(pdev, i); + if (pin_data[i].irq < 0) + return pin_data[i].irq; + + ret = pm8xxx_pin_populate(pctrl, &pin_data[i]); + if (ret) + return ret; + + pins[i].number = i; + pins[i].name = pm8xxx_groups[i]; + pins[i].drv_data = &pin_data[i]; + } + pctrl->desc.pins = pins; + + pctrl->desc.num_custom_params = ARRAY_SIZE(pm8xxx_mpp_bindings); + pctrl->desc.custom_params = pm8xxx_mpp_bindings; +#ifdef CONFIG_DEBUG_FS + pctrl->desc.custom_conf_items = pm8xxx_conf_items; +#endif + + pctrl->pctrl = devm_pinctrl_register(&pdev->dev, &pctrl->desc, pctrl); + if (IS_ERR(pctrl->pctrl)) { + dev_err(&pdev->dev, "couldn't register pm8xxx mpp driver\n"); + return PTR_ERR(pctrl->pctrl); + } + + pctrl->chip = pm8xxx_mpp_template; + pctrl->chip.base = -1; + pctrl->chip.parent = &pdev->dev; + pctrl->chip.of_node = pdev->dev.of_node; + pctrl->chip.of_gpio_n_cells = 2; + pctrl->chip.label = dev_name(pctrl->dev); + pctrl->chip.ngpio = pctrl->npins; + ret = gpiochip_add_data(&pctrl->chip, pctrl); + if (ret) { + dev_err(&pdev->dev, "failed register gpiochip\n"); + return ret; + } + + ret = gpiochip_add_pin_range(&pctrl->chip, + dev_name(pctrl->dev), + 0, 0, pctrl->chip.ngpio); + if (ret) { + dev_err(pctrl->dev, "failed to add pin range\n"); + goto unregister_gpiochip; + } + + platform_set_drvdata(pdev, pctrl); + + dev_dbg(&pdev->dev, "Qualcomm pm8xxx mpp driver probed\n"); + + return 0; + +unregister_gpiochip: + gpiochip_remove(&pctrl->chip); + + return ret; +} + +static int pm8xxx_mpp_remove(struct platform_device *pdev) +{ + struct pm8xxx_mpp *pctrl = platform_get_drvdata(pdev); + + gpiochip_remove(&pctrl->chip); + + return 0; +} + +static struct platform_driver pm8xxx_mpp_driver = { + .driver = { + .name = "qcom-ssbi-mpp", + .of_match_table = pm8xxx_mpp_of_match, + }, + .probe = pm8xxx_mpp_probe, + .remove = pm8xxx_mpp_remove, +}; + +module_platform_driver(pm8xxx_mpp_driver); + +MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>"); +MODULE_DESCRIPTION("Qualcomm PM8xxx MPP driver"); +MODULE_LICENSE("GPL v2"); |