diff options
Diffstat (limited to 'sound/soc/meson/g12a-toacodec.c')
| -rw-r--r-- | sound/soc/meson/g12a-toacodec.c | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/sound/soc/meson/g12a-toacodec.c b/sound/soc/meson/g12a-toacodec.c new file mode 100644 index 000000000..5ddeb22ac --- /dev/null +++ b/sound/soc/meson/g12a-toacodec.c @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2020 BayLibre, SAS. +// Author: Jerome Brunet <jbrunet@baylibre.com> + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <sound/pcm_params.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> + +#include <dt-bindings/sound/meson-g12a-toacodec.h> +#include "axg-tdm.h" +#include "meson-codec-glue.h" + +#define G12A_TOACODEC_DRV_NAME "g12a-toacodec" + +#define TOACODEC_CTRL0 0x0 +#define CTRL0_ENABLE_SHIFT 31 +#define CTRL0_DAT_SEL_SHIFT 14 +#define CTRL0_DAT_SEL (0x3 << CTRL0_DAT_SEL_SHIFT) +#define CTRL0_LANE_SEL 12 +#define CTRL0_LRCLK_SEL GENMASK(9, 8) +#define CTRL0_BLK_CAP_INV BIT(7) +#define CTRL0_BCLK_O_INV BIT(6) +#define CTRL0_BCLK_SEL GENMASK(5, 4) +#define CTRL0_MCLK_SEL GENMASK(2, 0) + +#define TOACODEC_OUT_CHMAX 2 + +static const char * const g12a_toacodec_mux_texts[] = { + "I2S A", "I2S B", "I2S C", +}; + +static int g12a_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_dapm_kcontrol_component(kcontrol); + struct snd_soc_dapm_context *dapm = + snd_soc_dapm_kcontrol_dapm(kcontrol); + struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; + unsigned int mux, changed; + + if (ucontrol->value.enumerated.item[0] >= e->items) + return -EINVAL; + + mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]); + changed = snd_soc_component_test_bits(component, e->reg, + CTRL0_DAT_SEL, + FIELD_PREP(CTRL0_DAT_SEL, mux)); + + if (!changed) + return 0; + + /* Force disconnect of the mux while updating */ + snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL); + + snd_soc_component_update_bits(component, e->reg, + CTRL0_DAT_SEL | + CTRL0_LRCLK_SEL | + CTRL0_BCLK_SEL, + FIELD_PREP(CTRL0_DAT_SEL, mux) | + FIELD_PREP(CTRL0_LRCLK_SEL, mux) | + FIELD_PREP(CTRL0_BCLK_SEL, mux)); + + /* + * FIXME: + * On this soc, the glue gets the MCLK directly from the clock + * controller instead of going the through the TDM interface. + * + * Here we assume interface A uses clock A, etc ... While it is + * true for now, it could be different. Instead the glue should + * find out the clock used by the interface and select the same + * source. For that, we will need regmap backed clock mux which + * is a work in progress + */ + snd_soc_component_update_bits(component, e->reg, + CTRL0_MCLK_SEL, + FIELD_PREP(CTRL0_MCLK_SEL, mux)); + + snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL); + + return 1; +} + +static SOC_ENUM_SINGLE_DECL(g12a_toacodec_mux_enum, TOACODEC_CTRL0, + CTRL0_DAT_SEL_SHIFT, + g12a_toacodec_mux_texts); + +static const struct snd_kcontrol_new g12a_toacodec_mux = + SOC_DAPM_ENUM_EXT("Source", g12a_toacodec_mux_enum, + snd_soc_dapm_get_enum_double, + g12a_toacodec_mux_put_enum); + +static const struct snd_kcontrol_new g12a_toacodec_out_enable = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", TOACODEC_CTRL0, + CTRL0_ENABLE_SHIFT, 1, 0); + +static const struct snd_soc_dapm_widget g12a_toacodec_widgets[] = { + SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0, + &g12a_toacodec_mux), + SND_SOC_DAPM_SWITCH("OUT EN", SND_SOC_NOPM, 0, 0, + &g12a_toacodec_out_enable), +}; + +static int g12a_toacodec_input_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct meson_codec_glue_input *data; + int ret; + + ret = meson_codec_glue_input_hw_params(substream, params, dai); + if (ret) + return ret; + + /* The glue will provide 1 lane out of the 4 to the output */ + data = meson_codec_glue_input_get_data(dai); + data->params.channels_min = min_t(unsigned int, TOACODEC_OUT_CHMAX, + data->params.channels_min); + data->params.channels_max = min_t(unsigned int, TOACODEC_OUT_CHMAX, + data->params.channels_max); + + return 0; +} + +static const struct snd_soc_dai_ops g12a_toacodec_input_ops = { + .hw_params = g12a_toacodec_input_hw_params, + .set_fmt = meson_codec_glue_input_set_fmt, +}; + +static const struct snd_soc_dai_ops g12a_toacodec_output_ops = { + .startup = meson_codec_glue_output_startup, +}; + +#define TOACODEC_STREAM(xname, xsuffix, xchmax) \ +{ \ + .stream_name = xname " " xsuffix, \ + .channels_min = 1, \ + .channels_max = (xchmax), \ + .rate_min = 5512, \ + .rate_max = 192000, \ + .formats = AXG_TDM_FORMATS, \ +} + +#define TOACODEC_INPUT(xname, xid) { \ + .name = xname, \ + .id = (xid), \ + .playback = TOACODEC_STREAM(xname, "Playback", 8), \ + .ops = &g12a_toacodec_input_ops, \ + .probe = meson_codec_glue_input_dai_probe, \ + .remove = meson_codec_glue_input_dai_remove, \ +} + +#define TOACODEC_OUTPUT(xname, xid) { \ + .name = xname, \ + .id = (xid), \ + .capture = TOACODEC_STREAM(xname, "Capture", TOACODEC_OUT_CHMAX), \ + .ops = &g12a_toacodec_output_ops, \ +} + +static struct snd_soc_dai_driver g12a_toacodec_dai_drv[] = { + TOACODEC_INPUT("IN A", TOACODEC_IN_A), + TOACODEC_INPUT("IN B", TOACODEC_IN_B), + TOACODEC_INPUT("IN C", TOACODEC_IN_C), + TOACODEC_OUTPUT("OUT", TOACODEC_OUT), +}; + +static int g12a_toacodec_component_probe(struct snd_soc_component *c) +{ + /* Initialize the static clock parameters */ + return snd_soc_component_write(c, TOACODEC_CTRL0, + CTRL0_BLK_CAP_INV); +} + +static const struct snd_soc_dapm_route g12a_toacodec_routes[] = { + { "SRC", "I2S A", "IN A Playback" }, + { "SRC", "I2S B", "IN B Playback" }, + { "SRC", "I2S C", "IN C Playback" }, + { "OUT EN", "Switch", "SRC" }, + { "OUT Capture", NULL, "OUT EN" }, +}; + +static const struct snd_kcontrol_new g12a_toacodec_controls[] = { + SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL, 3, 0), +}; + +static const struct snd_soc_component_driver g12a_toacodec_component_drv = { + .probe = g12a_toacodec_component_probe, + .controls = g12a_toacodec_controls, + .num_controls = ARRAY_SIZE(g12a_toacodec_controls), + .dapm_widgets = g12a_toacodec_widgets, + .num_dapm_widgets = ARRAY_SIZE(g12a_toacodec_widgets), + .dapm_routes = g12a_toacodec_routes, + .num_dapm_routes = ARRAY_SIZE(g12a_toacodec_routes), + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config g12a_toacodec_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static const struct of_device_id g12a_toacodec_of_match[] = { + { .compatible = "amlogic,g12a-toacodec", }, + {} +}; +MODULE_DEVICE_TABLE(of, g12a_toacodec_of_match); + +static int g12a_toacodec_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + void __iomem *regs; + struct regmap *map; + int ret; + + ret = device_reset(dev); + if (ret) + return ret; + + regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + map = devm_regmap_init_mmio(dev, regs, &g12a_toacodec_regmap_cfg); + if (IS_ERR(map)) { + dev_err(dev, "failed to init regmap: %ld\n", + PTR_ERR(map)); + return PTR_ERR(map); + } + + return devm_snd_soc_register_component(dev, + &g12a_toacodec_component_drv, g12a_toacodec_dai_drv, + ARRAY_SIZE(g12a_toacodec_dai_drv)); +} + +static struct platform_driver g12a_toacodec_pdrv = { + .driver = { + .name = G12A_TOACODEC_DRV_NAME, + .of_match_table = g12a_toacodec_of_match, + }, + .probe = g12a_toacodec_probe, +}; +module_platform_driver(g12a_toacodec_pdrv); + +MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); +MODULE_DESCRIPTION("Amlogic G12a To Internal DAC Codec Driver"); +MODULE_LICENSE("GPL v2"); |