diff options
Diffstat (limited to 'tools/power/cpupower/po')
| -rw-r--r-- | tools/power/cpupower/po/cs.po | 944 | ||||
| -rw-r--r-- | tools/power/cpupower/po/de.po | 977 | ||||
| -rw-r--r-- | tools/power/cpupower/po/fr.po | 947 | ||||
| -rw-r--r-- | tools/power/cpupower/po/it.po | 961 | ||||
| -rw-r--r-- | tools/power/cpupower/po/pt.po | 957 |
5 files changed, 4786 insertions, 0 deletions
diff --git a/tools/power/cpupower/po/cs.po b/tools/power/cpupower/po/cs.po new file mode 100644 index 000000000..bfc7e1702 --- /dev/null +++ b/tools/power/cpupower/po/cs.po @@ -0,0 +1,944 @@ +# translation of cs.po to Czech +# Czech translation for cpufrequtils package +# Czech messages for cpufrequtils. +# Copyright (C) 2007 kavol +# This file is distributed under the same license as the cpufrequtils package. +# +# Karel Volný <kavol@seznam.cz>, 2007, 2008. +msgid "" +msgstr "" +"Project-Id-Version: cs\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2008-06-11 16:26+0200\n" +"Last-Translator: Karel Volný <kavol@seznam.cz>\n" +"Language-Team: Czech <diskuze@lists.l10n.cz>\n" +"Language: cs\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +"X-Generator: KBabel 1.11.4\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time interval to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "" +"Chyby v programu prosím hlaste na %s (anglicky).\n" +"Chyby v překladu prosím hlaste na kavol@seznam.cz (česky ;-)\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Nelze zjistit počet CPU (%s: %s), předpokládá se 1.\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" minimální frekvence CPU - maximální frekvence CPU - regulátor\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " ovladač: %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " pro tento CPU není aktivní žádný známý ovladač cpufreq\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " ovladač: %s\n" + +#: utils/cpufreq-info.c:219 +#, fuzzy, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPU, které musí měnit frekvenci zároveň: " + +#: utils/cpufreq-info.c:230 +#, fuzzy, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPU, které musí měnit frekvenci zároveň: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr "" + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " hardwarové meze: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " dostupné frekvence: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " dostupné regulátory: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " současná taktika: frekvence by měla být mezi " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " a " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +" Regulátor \"%s\" může rozhodnout jakou frekvenci použít\n" +" v těchto mezích.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " současná frekvence CPU je " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (zjištěno hardwarovým voláním)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " statistika cpufreq: " + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Užití: cpufreq-info [přepínače]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Přepínače:\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Vypíše ladicí informace\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Zjistí aktuální frekvenci, na které CPU běží\n" +" podle cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Zjistí aktuální frekvenci, na které CPU běží\n" +" z hardware (dostupné jen uživateli root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Zjistí minimální a maximální dostupnou frekvenci CPU " +"*\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr " -d, --driver Zjistí aktivní ovladač cpufreq *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr " -p, --policy Zjistí aktuální taktiku cpufreq *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr " -g, --governors Zjistí dostupné regulátory cpufreq *\n" + +#: utils/cpufreq-info.c:483 +#, fuzzy, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -a, --affected-cpus Zjistí, které CPU musí měnit frekvenci zároveň *\n" + +#: utils/cpufreq-info.c:484 +#, fuzzy, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Zjistí, které CPU musí měnit frekvenci zároveň *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Zobrazí statistiku cpufreq, je-li dostupná\n" + +#: utils/cpufreq-info.c:487 +#, fuzzy, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -l, --hwlimits Zjistí minimální a maximální dostupnou frekvenci CPU " +"*\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Vypíše informace ve formátu, jaký používalo rozhraní\n" +" /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n" + +#: utils/cpufreq-info.c:491 +#, fuzzy, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human Výstup parametrů -f, -w a -s v „lidmi čitelném“ " +"formátu\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Vypíše tuto nápovědu\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Není-li zadán žádný parametr nebo je-li zadán pouze přepínač -c, --cpu, " +"jsou\n" +"vypsány ladicí informace, což může být užitečné například při hlášení chyb.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n" +"předpokládá se jeho hodnota 0.\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "Zadaný parametr nemůže být použit zároveň s přepínačem -c nebo --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Nelze zadat více než jeden parametr -c nebo --cpu\n" +"anebo více než jeden parametr určující výstup\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "neplatný nebo neznámý parametr\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "nelze analyzovat CPU %d, vypadá to, že není přítomen\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analyzuji CPU %d:\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Užití: cpufreq-set [přepínače]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ Nová nejnižší frekvence, kterou může regulátor " +"vybrat\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ Nová nejvyšší frekvence, kterou může regulátor " +"zvolit\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governors GOV Nový regulátor cpufreq\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ Frekvence, která má být nastavena. Vyžaduje, aby " +"byl\n" +" v jádře nahrán regulátor ‚userspace‘.\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, fuzzy, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Vypíše tuto nápovědu\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n" +"předpokládá se jeho hodnota 0.\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Poznámky:\n" +"1. Vynechání parametru -c nebo --cpu je ekvivalentní jeho nastavení na 0\n" +"2. Přepínač -f nebo --freq nemůže být použit zároveň s žádným jiným vyjma -" +"c\n" +" nebo --cpu\n" +"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozí), MHz, GHz nebo THz\n" +" připojením názvu jednotky bez mezery mezi číslem a jednotkou\n" +" (FREQ v kHz =^ Hz * 0,001 = ^ MHz * 1000 =^ GHz * 1000000)\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Chyba při nastavování nových hodnot. Obvyklé problémy:\n" +"- Máte patřičná administrátorská práva? (root?)\n" +"- Je požadovaný regulátor dostupný v jádře? (modprobe?)\n" +"- Snažíte se nastavit neplatnou taktiku?\n" +"- Snažíte se nastavit určitou frekvenci, ale není dostupný\n" +" regulátor ‚userspace‘, například protože není nahrán v jádře,\n" +" nebo nelze na tomto hardware nastavit určitou frekvenci?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "neznámý nebo nepodporovaný CPU?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"přepínač -f/--freq nemůže být použit zároveň\n" +"s přepínačem -d/--min, -u/--max nebo -g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Musí být zadán alespoň jeden přepínač\n" +"-f/--freq, -d/--min, -u/--max nebo -g/--governor\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr " -p, --policy Zjistí aktuální taktiku cpufreq *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analyzuji CPU %d:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " dostupné frekvence: " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " ovladač: %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr "" + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Užití: cpufreq-info [přepínače]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Vypíše ladicí informace\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Vypíše informace ve formátu, jaký používalo rozhraní\n" +" /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"Nelze zadat více než jeden parametr -c nebo --cpu\n" +"anebo více než jeden parametr určující výstup\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Číslo CPU, o kterém se mají zjistit informace\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Číslo CPU pro který se má provést nastavení " +#~ "cpufreq\n" diff --git a/tools/power/cpupower/po/de.po b/tools/power/cpupower/po/de.po new file mode 100644 index 000000000..9780a447b --- /dev/null +++ b/tools/power/cpupower/po/de.po @@ -0,0 +1,977 @@ +# German translations for cpufrequtils package +# German messages for cpufrequtils. +# Copyright (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.net> +# This file is distributed under the same license as the cpufrequtils package. +# +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 006\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2019-06-02 15:23+0200\n" +"Last-Translator: Benjamin Weis <benjamin.weis@gmx.com>\n" +"Language-Team: NONE\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "Prozessorkern C3" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "Prozessorkern C6" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "Prozessorpaket C3" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "Prozessorpaket C6" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "Prozessorkern C7" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "Prozessorpaket C2" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "Prozessorpaket C7" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "Paket in Schlafzustand (PC1 oder tiefer)" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "Prozessorpaket C1" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "North Bridge P1 boolescher Zähler (gibt 0 oder 1 zurück)" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "Prozessorkern ist nicht im Leerlauf" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "Prozessorkern ist in einem Ruhezustand" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "Durchschnittliche Frequenz (einschließlich Boost) in MHz" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c Befehl ...]\n" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c Befehl ...]\n" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "\t -v: ausführlicher\n" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "\t -h: diese Hilfe ausgeben\n" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time interval to measure for in seconds (default 1)\n" +msgstr "\t -i: Zeitintervall für die Messung in Sekunden (Standard 1)\n" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "\t -t: CPU-Topologie/Hierarchie anzeigen\n" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" +"\t -l: verfügbare CPU-Schlafwächter auflisten (für Verwendung mit -m)\n" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" +"\t -m: spezifische CPU-Schlafwächter anzeigen (in gleicher Reihenfolge)\n" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" +"nur einer von: -t, -l, -m ist erlaubt\n" +"Wenn keiner von ihnen übergeben wird," + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr " werden alle unterstützten Wächter angezeigt\n" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "Wächter %s, Zähler %s hat keine Zählfunktion. Implementierungsfehler\n" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr " *ist offline\n" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "%s: max. Wächternamenslänge (%d) überschritten\n" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "Kein passender Wächter in %s gefunden, versuchen Sie die Option -l\n" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "Wächter \"%s\" (%d Zustände) - Könnte nach %u s überlaufen\n" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "%s hat %.5f Sekunden gedauert und hat sich mit Status %d beendet\n" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "Anzahl der verfügbaren Prozessoren kann nicht gelesen werden\n" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "Verfügbarer Wächter %s benötigt root-Zugriff\n" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "Keine HW C-Zustandswächter gefunden\n" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "cpupower [ -c cpulist ] Unterbefehl [ARGS]\n" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "cpupower --version\n" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "Unterstützte Unterbefehle sind:\n" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" +"\n" +"Einige Unterbefehle können die Option -c cpulist verwenden.\n" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" +"Schauen Sie sich die allgemeine cpupower manpage an, um zu erfahren, wie man " +"es benutzt\n" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Bitte melden Sie Fehler an %s.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "Fehler beim Parsen der CPU-Liste\n" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "Unterbefehl %s benötigt root-Rechte\n" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "" +"Anzahl der CPUs konnte nicht herausgefinden werden (%s: %s), es wird daher 1 " +"angenommen\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr " minimale CPU-Frequenz - maximale CPU-Frequenz - Regler\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" +"Fehler beim Evaluieren der Boost-Fähigkeiten bei CPU %d -- sind Sie root?\n" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr " Boost-Zustand-Unterstützung: \n" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr " Unterstützt: %s\n" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "ja" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "nein" + +#: utils/cpufreq-info.c:164 +#, c-format +msgid " Active: %s\n" +msgstr " Aktiv: %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr " Boost-Zustände: %d\n" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr " Gesamtzustände: %d\n" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr " Pstate-Pb%d: %luMHz (Boost-Zustand)\n" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr " Pstate-P%d: %luMHz\n" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " kein oder ein unbekannter cpufreq-Treiber ist auf dieser CPU aktiv\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " Treiber: %s\n" + +#: utils/cpufreq-info.c:219 +#, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPUs, die mit der gleichen Hardwarefrequenz laufen: " + +#: utils/cpufreq-info.c:230 +#, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPUs, die ihre Frequenz mit Software koordinieren müssen: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr " Maximale Dauer eines Taktfrequenzwechsels: " + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " Hardwarebegrenzungen: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " verfügbare Frequenzschritte: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " verfügbare cpufreq-Regler: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " momentane Richtlinie: Frequenz sollte innerhalb " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " und " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +" sein. Der Regler \"%s\" kann frei entscheiden,\n" +" welche Geschwindigkeit er in diesem Bereich verwendet.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " momentane CPU-Frequenz ist " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (durch Aufruf der Hardware sichergestellt)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " cpufreq-Statistiken: " + +#: utils/cpufreq-info.c:472 +#, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Aufruf: cpupower freqinfo [Optionen]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Optionen:\n" + +#: utils/cpufreq-info.c:474 +#, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Gibt Debug-Informationen aus [Standard]\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Findet die momentane CPU-Taktfrquenz heraus (nach\n" +" Meinung des Betriebssystems) *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Findet die momentane CPU-Taktfrequenz heraus\n" +" (verifiziert durch Nachfrage bei der Hardware)\n" +" [nur der Administrator kann dies tun] *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Findet die minimale und maximale Taktfrequenz heraus " +"*\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr " -d, --driver Findet den momentanen Treiber heraus *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr " -p, --policy Findet die momentane Taktik heraus *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr " -g, --governors Ermittelt verfügbare cpufreq-Regler *\n" + +#: utils/cpufreq-info.c:483 +#, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -r, --related-cpus Findet heraus, welche CPUs mit derselben " +"physikalischen\n" +" Taktfrequenz laufen *\n" + +#: utils/cpufreq-info.c:484 +#, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Findet heraus, von welchen CPUs die Taktfrequenz " +"durch\n" +" Software koordiniert werden muss *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Zeigt cpufreq-Statistiken an, falls vorhanden\n" + +#: utils/cpufreq-info.c:487 +#, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -y, --latency Findet die maximale Dauer eines Taktfrequenzwechsels " +"heraus *\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr " -b, --boost Prüft auf Turbo- oder Boost-Modi *\n" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the " +"/proc/cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Erzeugt Informationen in einem ähnlichem Format zu " +"dem\n" +" der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n" +" Kernel-Versionen\n" + +#: utils/cpufreq-info.c:491 +#, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human Formatiert Taktfrequenz- und Zeitdauerangaben in " +"besser\n" +" lesbarer Form (MHz, GHz; us, ms)\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Gibt diese Kurzübersicht aus\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Sofern kein anderer Parameter als '-c, --cpu' angegeben wird, liefert " +"dieses\n" +"Programm Informationen, die z.B. zum Berichten von Fehlern nützlich sind.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Für die mit * markierten Argumente ist das Weglassen des Arguments\n" +"-c oder --cpu gleichbedeutend mit der Einstellung auf Null\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "Diese Option kann nicht mit der --cpu-Option kombiniert werden\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Sie können nicht mehr als einen Parameter --cpu und/oder\n" +"mehr als ein ausgabespezifisches Argument angeben\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "unbekannter oder falscher Parameter\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "" +"CPU %d konnte nicht analysiert werden, da sie scheinbar nicht existiert\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "CPU %d wird analysiert:\n" + +#: utils/cpufreq-set.c:25 +#, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Aufruf: cpupower frequency-set [Optionen]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ neue minimale CPU-Frequenz, die der Regler\n" +" auswählen darf\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ neue maximale Taktfrequenz, die der Regler\n" +" auswählen darf\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governors GOV neuer cpufreq-Regler\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ bestimmte Frequenz, die eingestellt werden soll.\n" +" Erfordert einen verfügbaren und geladenen " +"userspace-Regler\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr " -r, --related Schaltet alle hardwarebezogenen CPUs um\n" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Gibt diesen Bildschirm aus\n" + +#: utils/cpufreq-set.c:35 +#, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Hinweis:\n" +"1. Das Weglassen des Arguments -c oder --cpu ist gleichbedeutend mit der " +"Einstellung auf \"all\"\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Hinweise:\n" +"1. Sofern kein -c oder --cpu-Parameter angegeben ist, wird '--cpu 0'\n" +" angenommen\n" +"2. Der Parameter -f bzw. --freq kann mit keinem anderen als dem Parameter\n" +" -c bzw. --cpu kombiniert werden\n" +"3. FREQuenzen können in Hz, kHz (Standard), MHz, GHz oder THz eingegeben\n" +" werden, indem der Wert und unmittelbar anschließend (ohne Leerzeichen!)\n" +" die Einheit angegeben werden. (Bsp: 1GHz )\n" +" (FREQuenz in kHz =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Fehler beim Festlegen neuer Werte. Häufige Fehler:\n" +"- Verfügen Sie über die erforderlichen Administrationsrechte? (Superuser?)\n" +"- Ist der von Ihnen gewünschte Regler verfügbar und mittels modprobe " +"geladen?\n" +"- Versuchen Sie eine ungültige Richtlinie festzulegen?\n" +"- Versuchen Sie eine bestimmte Frequenz festzulegen, aber der " +"userspace-Regler ist nicht verfügbar,\n" +" z.B. wegen Hardware, die nicht auf eine bestimmte Frequenz eingestellt " +"werden kann\n" +" oder weil der userspace-Regler nicht geladen ist?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "falsche, unbekannte oder nicht regelbare CPU?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, " +"-u/--max\n" +"oder -g/--governor kombiniert werden\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max und\n" +"-g/--governor muss übergeben werden\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "CPU einstellen: %d\n" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "Aufruf: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" +" -m, --sched-mc [VAL] Legt die Mehrkern-Scheduler-Richtlinie des " +"Kernels fest.\n" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "--perf-bias-Parameter außerhalb des Bereichs [0-%d]\n" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "Parameter --sched-mc außerhalb des Bereichs [0-%d]\n" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "Parameter --sched-smt außerhalb des Bereichs [0-%d]\n" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "Fehler beim Einstellen von sched-mc %s\n" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "Fehler beim Einstellen von sched-smt %s\n" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "Fehler beim Einstellen des perf-bias-Wertes auf der CPU %d\n" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "Aufruf: cpupower info [ -b ] [ -m ] [ -s ]\n" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr "" +" -m, --sched-mc Ruft die Mehrkern-Scheduler-Richtlinie des Kernels ab.\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" +"\n" +"Wenn Sie keine Option übergeben, werden alle Informationen angezeigt, " +"standardmäßig nur auf Kern 0\n" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "Mehrkern-Scheduler-Einstellung des Systems: " + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "nicht unterstützt\n" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "perf-bias-Wert konnte nicht gelesen werden\n" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "perf-bias: %d\n" + +#: utils/cpuidle-info.c:28 +#, c-format +msgid "Analyzing CPU %d:\n" +msgstr "CPU %d wird analysiert:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "CPU %u: Keine Ruhezustände\n" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "CPU %u: Ruhezustands-Informationen können nicht gelesen werden\n" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "Max. Ruhezustand %u konnte nicht bestimmt werden\n" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "Anzahl der Ruhezustände: %d\n" + +#: utils/cpuidle-info.c:48 +#, c-format +msgid "Available idle states:" +msgstr "Verfügbare Ruhezustände:" + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "Merker/Beschreibung: %s\n" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "Latenz: %lu\n" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "Aufruf: %lu\n" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "Dauer: %llu\n" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "cpuidle-Treiber konnte nicht bestimmt werden\n" + +#: utils/cpuidle-info.c:94 +#, c-format +msgid "CPUidle driver: %s\n" +msgstr "CPUidle-Treiber: %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "cpuidle-Regler konnte nicht bestimmt werden\n" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "CPUidle-Regler: %s\n" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "CPU %u: C-Zustands-Informationen können nicht gelesen werden\n" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "aktiver Zustand: C0\n" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "max_cstate: C%u\n" + +#: utils/cpuidle-info.c:129 +#, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr "maximal erlaubte Latenz: %lu usec\n" + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "Zustände:\t\n" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr " C%d: Typ[C%d] " + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "promotion[--] demotion[--] " + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "Latenz[%03lu] " + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "Aufruf[%08lu] " + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "Dauer[%020Lu] \n" + +#: utils/cpuidle-info.c:147 +#, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Aufruf: cpupower idleinfo [Optionen]\n" + +#: utils/cpuidle-info.c:149 +#, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr "" +" -s, --silent Nur allgemeine C-Zustands-Informationen anzeigen\n" + +#: utils/cpuidle-info.c:150 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the " +"/proc/acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Gibt Informationen so aus, wie sie von der " +"Schnittstelle\n" +" /proc/acpi/processor/*/power in älteren Kerneln " +"bereitgestellt werden\n" + +#: utils/cpuidle-info.c:209 +#, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "Sie können nicht mehr als ein ausgabenspezifisches Argument angeben\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Nummer der CPU, über die Informationen " +#~ "herausgefunden werden sollen\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Nummer der CPU, deren " +#~ "Taktfrequenz-Einstellung\n" +#~ " werden soll\n" diff --git a/tools/power/cpupower/po/fr.po b/tools/power/cpupower/po/fr.po new file mode 100644 index 000000000..b6e505b34 --- /dev/null +++ b/tools/power/cpupower/po/fr.po @@ -0,0 +1,947 @@ +# French translations for cpufrequtils package +# Copyright (C) 2004 THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the cpufrequtils package. +# Ducrot Bruno <ducrot@poupinou.org>, 2004. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 0.1-pre2\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2004-11-17 15:53+1000\n" +"Last-Translator: Bruno Ducrot <ducrot@poupinou.org>\n" +"Language-Team: NONE\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time interval to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Veuillez rapportez les erreurs et les bogues à %s, s'il vous plait.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Détermination du nombre de CPUs (%s : %s) impossible. Assume 1\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" Fréquence CPU minimale - Fréquence CPU maximale - régulateur\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " pilote : %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " pas de pilotes cpufreq reconnu pour ce CPU\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " pilote : %s\n" + +#: utils/cpufreq-info.c:219 +#, fuzzy, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPUs qui doivent changer de fréquences en même temps : " + +#: utils/cpufreq-info.c:230 +#, fuzzy, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPUs qui doivent changer de fréquences en même temps : " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr "" + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " limitation matérielle : " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " plage de fréquence : " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " régulateurs disponibles : " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " tactique actuelle : la fréquence doit être comprise entre " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " et " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +"Le régulateur \"%s\" est libre de choisir la vitesse\n" +" dans cette plage de fréquences.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " la fréquence actuelle de ce CPU est " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (vérifié par un appel direct du matériel)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " des statistique concernant cpufreq:" + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Usage : cpufreq-info [options]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Options :\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Afficher les informations de déboguage\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Obtenir la fréquence actuelle du CPU selon le point\n" +" de vue du coeur du système de cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Obtenir la fréquence actuelle du CPU directement par\n" +" le matériel (doit être root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Affiche les fréquences minimales et maximales du CPU " +"*\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr " -d, --driver Affiche le pilote cpufreq utilisé *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr " -p, --policy Affiche la tactique actuelle de cpufreq *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr "" +" -g, --governors Affiche les régulateurs disponibles de cpufreq *\n" + +#: utils/cpufreq-info.c:483 +#, fuzzy, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -a, --affected-cpus Affiche quels sont les CPUs qui doivent changer de\n" +" fréquences en même temps *\n" + +#: utils/cpufreq-info.c:484 +#, fuzzy, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Affiche quels sont les CPUs qui doivent changer de\n" +" fréquences en même temps *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr "" +" -s, --stats Indique des statistiques concernant cpufreq, si\n" +" disponibles\n" + +#: utils/cpufreq-info.c:487 +#, fuzzy, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -l, --hwlimits Affiche les fréquences minimales et maximales du CPU " +"*\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Affiche les informations en utilisant l'interface\n" +" fournie par /proc/cpufreq, présente dans les " +"versions\n" +" 2.4 et les anciennes versions 2.6 du noyau\n" + +#: utils/cpufreq-info.c:491 +#, fuzzy, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human affiche dans un format lisible pour un humain\n" +" pour les options -f, -w et -s (MHz, GHz)\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help affiche l'aide-mémoire\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Par défaut, les informations de déboguage seront affichées si aucun\n" +"argument, ou bien si seulement l'argument -c (--cpu) est donné, afin de\n" +"faciliter les rapports de bogues par exemple\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "Cette option est incompatible avec --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"On ne peut indiquer plus d'un paramètre --cpu, tout comme l'on ne peut\n" +"spécifier plus d'un argument de formatage\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "option invalide\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "analyse du CPU %d impossible puisqu'il ne semble pas être présent\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analyse du CPU %d :\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Usage : cpufreq-set [options]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ nouvelle fréquence minimale du CPU à utiliser\n" +" par le régulateur\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ nouvelle fréquence maximale du CPU à utiliser\n" +" par le régulateur\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governor GOV active le régulateur GOV\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ fixe la fréquence du processeur à FREQ. Il faut\n" +" que le régulateur « userspace » soit disponible \n" +" et activé.\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, fuzzy, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help affiche l'aide-mémoire\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Remarque :\n" +"1. Le CPU numéro 0 sera utilisé par défaut si -c (ou --cpu) est omis ;\n" +"2. l'argument -f FREQ (ou --freq FREQ) ne peut être utilisé qu'avec --cpu ;\n" +"3. on pourra préciser l'unité des fréquences en postfixant sans aucune " +"espace\n" +" les valeurs par hz, kHz (par défaut), MHz, GHz ou THz\n" +" (kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"En ajustant les nouveaux paramètres, une erreur est apparue. Les sources\n" +"d'erreur typique sont :\n" +"- droit d'administration insuffisant (êtes-vous root ?) ;\n" +"- le régulateur choisi n'est pas disponible, ou bien n'est pas disponible " +"en\n" +" tant que module noyau ;\n" +"- la tactique n'est pas disponible ;\n" +"- vous voulez utiliser l'option -f/--freq, mais le régulateur « userspace »\n" +" n'est pas disponible, par exemple parce que le matériel ne le supporte\n" +" pas, ou bien n'est tout simplement pas chargé.\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "CPU inconnu ou non supporté ?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"l'option -f/--freq est incompatible avec les options -d/--min, -u/--max et\n" +"-g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"L'un de ces paramètres est obligatoire : -f/--freq, -d/--min, -u/--max et\n" +"-g/--governor\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr " -p, --policy Affiche la tactique actuelle de cpufreq *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analyse du CPU %d :\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " plage de fréquence : " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " pilote : %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr "" + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Usage : cpufreq-info [options]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Afficher les informations de déboguage\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Affiche les informations en utilisant l'interface\n" +" fournie par /proc/cpufreq, présente dans les " +"versions\n" +" 2.4 et les anciennes versions 2.6 du noyau\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"On ne peut indiquer plus d'un paramètre --cpu, tout comme l'on ne peut\n" +"spécifier plus d'un argument de formatage\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Numéro du CPU pour lequel l'information sera " +#~ "affichée\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU numéro du CPU à prendre en compte pour les\n" +#~ " changements\n" diff --git a/tools/power/cpupower/po/it.po b/tools/power/cpupower/po/it.po new file mode 100644 index 000000000..a1deeb52c --- /dev/null +++ b/tools/power/cpupower/po/it.po @@ -0,0 +1,961 @@ +# Italian translations for cpufrequtils package +# Copyright (C) 2004-2009 +# This file is distributed under the same license as the cpufrequtils package. +# Mattia Dongili <malattia@gmail.com>. +# +# +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 0.3\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2009-08-15 12:00+0900\n" +"Last-Translator: Mattia Dongili <malattia@gmail.com>\n" +"Language-Team: NONE\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time interval to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Per favore, comunicare errori e malfunzionamenti a %s.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Impossibile determinare il numero di CPU (%s: %s), assumo sia 1\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" frequenza minima CPU - frequenza massima CPU - gestore\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " modulo %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " nessun modulo o modulo cpufreq sconosciuto per questa CPU\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " modulo %s\n" + +#: utils/cpufreq-info.c:219 +#, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPU che operano alla stessa frequenza hardware: " + +#: utils/cpufreq-info.c:230 +#, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPU che è necessario siano coordinate dal software: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr " latenza massima durante la transizione: " + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " limiti hardware: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " frequenze disponibili: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " gestori disponibili: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " gestore attuale: la frequenza deve mantenersi tra " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " e " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +" Il gestore \"%s\" può decidere quale velocità usare\n" +" in questo intervallo.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " la frequenza attuale della CPU è " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (ottenuta da una chiamata diretta all'hardware)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " statistiche cpufreq:" + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Uso: cpufreq-info [opzioni]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Opzioni:\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Mostra informazioni di debug\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Mostra la frequenza attuale della CPU secondo\n" +" il modulo cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Mostra la frequenza attuale della CPU leggendola\n" +" dall'hardware (disponibile solo per l'utente root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Determina le frequenze minima e massima possibili per " +"la CPU *\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr "" +" -d, --driver Determina il modulo cpufreq del kernel in uso *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr "" +" -p, --policy Mostra il gestore cpufreq attualmente in uso *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr " -g, --governors Determina i gestori cpufreq disponibili *\n" + +#: utils/cpufreq-info.c:483 +#, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -r, --related-cpus Determina quali CPU operano alla stessa frequenza *\n" + +#: utils/cpufreq-info.c:484 +#, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Determina quali CPU devono avere la frequenza\n" +" coordinata dal software *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Mostra le statistiche se disponibili\n" + +#: utils/cpufreq-info.c:487 +#, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -y, --latency Determina la latenza massima durante i cambi di " +"frequenza *\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Stampa le informazioni come se provenissero dalla\n" +" interfaccia cpufreq /proc/ presente nei kernel\n" +" 2.4 ed i primi 2.6\n" + +#: utils/cpufreq-info.c:491 +#, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human formatta l'output delle opzioni -f, -w, -s e -y in " +"maniera\n" +" leggibile da un essere umano\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Stampa questa schermata\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Se non viene specificata nessuna opzione o viene specificata solo l'opzione -" +"c, --cpu,\n" +"le informazioni di debug per cpufreq saranno utili ad esempio a riportare i " +"bug.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Per le opzioni segnalate con *, omettere l'opzione -c o --cpu è come " +"specificarla\n" +"con il valore 0\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "" +"L'opzione specificata a questo programma non può essere combinata con --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Non è possibile specificare più di una volta l'opzione --cpu e/o\n" +"specificare più di un parametro di output specifico\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "opzione sconosciuta o non valida\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "impossibile analizzare la CPU %d poiché non sembra essere presente\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analisi della CPU %d:\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Uso: cpufreq-set [opzioni]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ la nuova frequenza minima che il gestore cpufreq " +"può scegliere\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ la nuova frequenza massima che il gestore cpufreq " +"può scegliere\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governor GOV nuovo gestore cpufreq\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ specifica la frequenza a cui impostare la CPU.\n" +" È necessario che il gestore userspace sia " +"disponibile e caricato\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" +" -r, --related Modifica tutte le CPU coordinate dall'hardware\n" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Stampa questa schermata\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Per le opzioni segnalate con *, omettere l'opzione -c o --cpu è come " +"specificarla\n" +"con il valore 0\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Note:\n" +"1. Omettere l'opzione -c o --cpu è equivalente a impostarlo a 0\n" +"2. l'opzione -f FREQ, --freq FREQ non può essere specificata con altre " +"opzioni\n" +" ad eccezione dell'opzione -c CPU o --cpu CPU\n" +"3. le FREQuenze possono essere specuficate in Hz, kHz (default), MHz, GHz, " +"or THz\n" +" postponendo l'unità di misura al valore senza nessuno spazio fra loro\n" +" (FREQuenza in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Si sono verificati degli errori impostando i nuovi valori.\n" +"Alcuni errori comuni possono essere:\n" +"- Hai i necessari diritti di amministrazione? (super-user?)\n" +"- Il gestore che hai richiesto è disponibile e caricato?\n" +"- Stai provando ad impostare una politica di gestione non valida?\n" +"- Stai provando a impostare una specifica frequenza ma il gestore\n" +" userspace non è disponibile, per esempio a causa dell'hardware\n" +" che non supporta frequenze fisse o a causa del fatto che\n" +" il gestore userspace non è caricato?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "CPU errata, sconosciuta o non gestita?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"l'opzione -f/--freq non può venire combinata con i parametri\n" +" -d/--min, -u/--max o -g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Almeno una delle opzioni -f/--freq, -d/--min, -u/--max, e -g/--governor\n" +"deve essere specificata\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr "" +" -p, --policy Mostra il gestore cpufreq attualmente in uso *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analisi della CPU %d:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " frequenze disponibili: " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " modulo %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, fuzzy, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr " latenza massima durante la transizione: " + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Uso: cpufreq-info [opzioni]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Mostra informazioni di debug\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Stampa le informazioni come se provenissero dalla\n" +" interfaccia cpufreq /proc/ presente nei kernel\n" +" 2.4 ed i primi 2.6\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"Non è possibile specificare più di una volta l'opzione --cpu e/o\n" +"specificare più di un parametro di output specifico\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Numero di CPU per la quale ottenere le " +#~ "informazioni\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU numero di CPU per la quale modificare le " +#~ "impostazioni\n" + +#, fuzzy +#~ msgid " CPUs which coordinate software frequency requirements: " +#~ msgstr "" +#~ " CPU per le quali e` necessario cambiare la frequenza " +#~ "contemporaneamente: " diff --git a/tools/power/cpupower/po/pt.po b/tools/power/cpupower/po/pt.po new file mode 100644 index 000000000..902186585 --- /dev/null +++ b/tools/power/cpupower/po/pt.po @@ -0,0 +1,957 @@ +# Brazilian Portuguese translations for cpufrequtils package +# Copyright (C) 2008 THE cpufrequtils'S COPYRIGHT HOLDER +# This file is distributed under the same license as the cpufrequtils package. +# Claudio Eduardo <claudioeddy@gmail.com>, 2009. +# +# +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 004\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2008-06-14 22:16-0400\n" +"Last-Translator: Claudio Eduardo <claudioeddy@gmail.com>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time interval to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Reporte erros e bugs para %s, por favor.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Não foi possível contar o número de CPUs (%s: %s), assumindo 1\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" frequência mínina do CPU - frequência máxima do CPU - " +"regulador\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " driver: %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " nenhum ou driver do cpufreq deconhecido está ativo nesse CPU\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " driver: %s\n" + +#: utils/cpufreq-info.c:219 +#, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPUs que rodam na mesma frequência de hardware: " + +#: utils/cpufreq-info.c:230 +#, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPUs que precisam ter suas frequências coordenadas por software: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr " maior latência de transição: " + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " limites do hardware: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " níveis de frequência disponíveis: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " reguladores do cpufreq disponíveis: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " política de frequência atual deve estar entre " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " e " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +"O regulador \"%s\" deve decidir qual velocidade usar\n" +" dentro desse limite.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " frequência atual do CPU é " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (declarado por chamada ao hardware)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " status do cpufreq: " + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Uso: cpufreq-info [opções]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Opções:\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Mostra informação de debug\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Obtem a frequência na qual o CPU roda no momento, de " +"acordo\n" +" com o núcleo do cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Obtem a frequência na qual o CPU está operando no " +"momento,\n" +" através de leitura no hardware (disponível somente " +"para root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Determina a frequência mínima e máxima do CPU " +"permitida *\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr "" +" -d, --driver Determina o driver do kernel do cpufreq usado *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr "" +"--p, --policy Obtem a política do cpufreq em uso no momento *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr "" +" -g, --governors Determina reguladores do cpufreq disponíveis *\n" + +#: utils/cpufreq-info.c:483 +#, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -r, --related-cpus Determina quais CPUs rodam na mesma frequência de " +"hardware *\n" + +#: utils/cpufreq-info.c:484 +#, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Determina quais CPUs precisam ter suas frequências\n" +" coordenadas por software *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Mostra estatísticas do cpufreq se disponíveis\n" + +#: utils/cpufreq-info.c:487 +#, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -y, --latency Determina a latência máxima nas trocas de frequência " +"do CPU *\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Mostra informação do tipo provida pela interface /" +"proc/cpufreq\n" +" em kernels 2.4. e mais recentes 2.6\n" + +#: utils/cpufreq-info.c:491 +#, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human saída legível para humanos para os parâmetros -f, -w, " +"-s e -y\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Imprime essa tela\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Se nenhum argumento ou somente o parâmetro -c, --cpu é dado, informação de " +"debug sobre\n" +"o cpufreq é mostrada, o que é útil por exemplo para reportar bugs.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Para os argumentos marcados com *, omitir o argumento -c ou --cpu é\n" +"equivalente a setá-lo como zero\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "" +"O argumento usado pra essa ferramenta não pode ser combinado com um " +"argumento --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Você não pode especificar mais do que um parâmetro --cpu e/ou\n" +"mais do que um argumento de saída específico\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "argumento inválido ou desconhecido\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "" +"não foi possível analisar o CPU % já que o mesmo parece não estar presente\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analisando o CPU %d:\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Uso: cpufreq-set [opções]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ nova frequência mínima do CPU que o regulador " +"deve selecionar\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ nova frequência máxima do CPU que o regulador " +"deve escolher\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governor GOV novo regulador do cpufreq\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ frequência específica para ser setada. Necessita " +"que o regulador em\n" +" nível de usuário esteja disponível e carregado\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" +" -r, --related Modifica todos os CPUs relacionados ao hardware\n" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Mostra essa tela\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Para os argumentos marcados com *, omitir o argumento -c ou --cpu é\n" +"equivalente a setá-lo como zero\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Notas:\n" +"1. Omitir o argumento -c or --cpu é equivalente a setá-lo como zero\n" +"2. O parâmetro -f FREQ, --freq FREQ não pode ser combinado com qualquer " +"outro parâmetro\n" +" exceto com o parâmetro -c CPU, --cpu CPU\n" +"3. FREQuências podem ser usadas em Hz, kHz (padrão), MHz, GHz, o THz\n" +" colocando o nome desejado da unidade após o valor, sem qualquer espaço\n" +" (FREQuência em kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Erro ao setar novos valores. Erros comuns:\n" +"- Você tem direitos administrativos necessários? (super-usuário?)\n" +"- O regulador que você requesitou está disponível e foi \"modprobed\"?\n" +"- Tentando setar uma política inválida?\n" +"- Tentando setar uma frequência específica, mas o regulador em nível de " +"usuário não está disponível,\n" +" por exemplo devido ao hardware que não pode ser setado pra uma frequência " +"específica\n" +" ou porque o regulador em nível de usuário não foi carregado?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "CPU errado, desconhecido ou inesperado?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"o parâmetro -f/--freq não pode ser combinado com os parâmetros -d/--min, -" +"u/--max ou\n" +"-g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Pelo menos um parâmetro entre -f/--freq, -d/--min, -u/--max, e\n" +"-g/--governor deve ser usado\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr "" +"--p, --policy Obtem a política do cpufreq em uso no momento *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analisando o CPU %d:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " níveis de frequência disponíveis: " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " driver: %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, fuzzy, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr " maior latência de transição: " + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Uso: cpufreq-info [opções]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Mostra informação de debug\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Mostra informação do tipo provida pela interface /" +"proc/cpufreq\n" +" em kernels 2.4. e mais recentes 2.6\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"Você não pode especificar mais do que um parâmetro --cpu e/ou\n" +"mais do que um argumento de saída específico\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU número do CPU sobre o qual as inforções devem ser " +#~ "determinadas\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU número do CPU onde as configurações do cpufreq " +#~ "vão ser modificadas\n" |