diff options
Diffstat (limited to 'tools/testing/selftests/powerpc/eeh')
| -rw-r--r-- | tools/testing/selftests/powerpc/eeh/Makefile | 9 | ||||
| -rwxr-xr-x | tools/testing/selftests/powerpc/eeh/eeh-basic.sh | 90 | ||||
| -rwxr-xr-x | tools/testing/selftests/powerpc/eeh/eeh-functions.sh | 85 |
3 files changed, 184 insertions, 0 deletions
diff --git a/tools/testing/selftests/powerpc/eeh/Makefile b/tools/testing/selftests/powerpc/eeh/Makefile new file mode 100644 index 000000000..b397babd5 --- /dev/null +++ b/tools/testing/selftests/powerpc/eeh/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +noarg: + $(MAKE) -C ../ + +TEST_PROGS := eeh-basic.sh +TEST_FILES := eeh-functions.sh + +top_srcdir = ../../../../.. +include ../../lib.mk diff --git a/tools/testing/selftests/powerpc/eeh/eeh-basic.sh b/tools/testing/selftests/powerpc/eeh/eeh-basic.sh new file mode 100755 index 000000000..64779f073 --- /dev/null +++ b/tools/testing/selftests/powerpc/eeh/eeh-basic.sh @@ -0,0 +1,90 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +KSELFTESTS_SKIP=4 + +. ./eeh-functions.sh + +if ! eeh_supported ; then + echo "EEH not supported on this system, skipping" + exit $KSELFTESTS_SKIP; +fi + +if [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_check" ] && \ + [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_break" ] ; then + echo "debugfs EEH testing files are missing. Is debugfs mounted?" + exit $KSELFTESTS_SKIP; +fi + +pre_lspci=`mktemp` +lspci > $pre_lspci + +# Bump the max freeze count to something absurd so we don't +# trip over it while breaking things. +echo 5000 > /sys/kernel/debug/powerpc/eeh_max_freezes + +# record the devices that we break in here. Assuming everything +# goes to plan we should get them back once the recover process +# is finished. +devices="" + +# Build up a list of candidate devices. +for dev in `ls -1 /sys/bus/pci/devices/ | grep '\.0$'` ; do + # skip bridges since we can't recover them (yet...) + if [ -e "/sys/bus/pci/devices/$dev/pci_bus" ] ; then + echo "$dev, Skipped: bridge" + continue; + fi + + # Skip VFs for now since we don't have a reliable way + # to break them. + if [ -e "/sys/bus/pci/devices/$dev/physfn" ] ; then + echo "$dev, Skipped: virtfn" + continue; + fi + + if [ "ahci" = "$(basename $(realpath /sys/bus/pci/devices/$dev/driver))" ] ; then + echo "$dev, Skipped: ahci doesn't support recovery" + continue + fi + + # Don't inject errosr into an already-frozen PE. This happens with + # PEs that contain multiple PCI devices (e.g. multi-function cards) + # and injecting new errors during the recovery process will probably + # result in the recovery failing and the device being marked as + # failed. + if ! pe_ok $dev ; then + echo "$dev, Skipped: Bad initial PE state" + continue; + fi + + echo "$dev, Added" + + # Add to this list of device to check + devices="$devices $dev" +done + +dev_count="$(echo $devices | wc -w)" +echo "Found ${dev_count} breakable devices..." + +failed=0 +for dev in $devices ; do + echo "Breaking $dev..." + + if ! pe_ok $dev ; then + echo "Skipping $dev, Initial PE state is not ok" + failed="$((failed + 1))" + continue; + fi + + if ! eeh_one_dev $dev ; then + failed="$((failed + 1))" + fi +done + +echo "$failed devices failed to recover ($dev_count tested)" +lspci | diff -u $pre_lspci - +rm -f $pre_lspci + +test "$failed" -eq 0 +exit $? diff --git a/tools/testing/selftests/powerpc/eeh/eeh-functions.sh b/tools/testing/selftests/powerpc/eeh/eeh-functions.sh new file mode 100755 index 000000000..00dc32c0e --- /dev/null +++ b/tools/testing/selftests/powerpc/eeh/eeh-functions.sh @@ -0,0 +1,85 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +pe_ok() { + local dev="$1" + local path="/sys/bus/pci/devices/$dev/eeh_pe_state" + + # if a driver doesn't support the error handling callbacks then the + # device is recovered by removing and re-probing it. This causes the + # sysfs directory to disappear so read the PE state once and squash + # any potential error messages + local eeh_state="$(cat $path 2>/dev/null)" + if [ -z "$eeh_state" ]; then + return 1; + fi + + local fw_state="$(echo $eeh_state | cut -d' ' -f1)" + local sw_state="$(echo $eeh_state | cut -d' ' -f2)" + + # If EEH_PE_ISOLATED or EEH_PE_RECOVERING are set then the PE is in an + # error state or being recovered. Either way, not ok. + if [ "$((sw_state & 0x3))" -ne 0 ] ; then + return 1 + fi + + # A functioning PE should have the EEH_STATE_MMIO_ACTIVE and + # EEH_STATE_DMA_ACTIVE flags set. For some goddamn stupid reason + # the platform backends set these when the PE is in reset. The + # RECOVERING check above should stop any false positives though. + if [ "$((fw_state & 0x18))" -ne "$((0x18))" ] ; then + return 1 + fi + + return 0; +} + +eeh_supported() { + test -e /proc/powerpc/eeh && \ + grep -q 'EEH Subsystem is enabled' /proc/powerpc/eeh +} + +eeh_one_dev() { + local dev="$1" + + # Using this function from the command line is sometimes useful for + # testing so check that the argument is a well-formed sysfs device + # name. + if ! test -e /sys/bus/pci/devices/$dev/ ; then + echo "Error: '$dev' must be a sysfs device name (DDDD:BB:DD.F)" + return 1; + fi + + # Break it + echo $dev >/sys/kernel/debug/powerpc/eeh_dev_break + + # Force an EEH device check. If the kernel has already + # noticed the EEH (due to a driver poll or whatever), this + # is a no-op. + echo $dev >/sys/kernel/debug/powerpc/eeh_dev_check + + # Default to a 60s timeout when waiting for a device to recover. This + # is an arbitrary default which can be overridden by setting the + # EEH_MAX_WAIT environmental variable when required. + + # The current record holder for longest recovery time is: + # "Adaptec Series 8 12G SAS/PCIe 3" at 39 seconds + max_wait=${EEH_MAX_WAIT:=60} + + for i in `seq 0 ${max_wait}` ; do + if pe_ok $dev ; then + break; + fi + echo "$dev, waited $i/${max_wait}" + sleep 1 + done + + if ! pe_ok $dev ; then + echo "$dev, Failed to recover!" + return 1; + fi + + echo "$dev, Recovered after $i seconds" + return 0; +} + |