1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
*/
/dts-v1/;
#include "imx8mm-var-som.dtsi"
/ {
model = "Variscite VAR-SOM-MX8MM Symphony evaluation board";
compatible = "variscite,var-som-mx8mm-symphony", "variscite,var-som-mx8mm", "fsl,imx8mm";
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb_otg2_vbus>;
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
gpio-keys {
compatible = "gpio-keys";
back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
};
};
leds {
compatible = "gpio-leds";
led {
label = "Heartbeat";
gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
};
ðphy {
reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>;
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
pca9534: gpio@20 {
compatible = "nxp,pca9534";
reg = <0x20>;
gpio-controller;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pca9534>;
interrupt-parent = <&gpio1>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
#gpio-cells = <2>;
wakeup-source;
/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
usb3-sata-sel-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "usb3_sata_sel";
};
som-vselect-hog {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "som_vselect";
};
enet-sel-hog {
gpio-hog;
gpios = <7 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "enet_sel";
};
};
extcon_usbotg1: typec@3d {
compatible = "nxp,ptn5150";
reg = <0x3d>;
interrupt-parent = <&gpio1>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ptn5150>;
status = "okay";
};
};
&i2c3 {
/* Capacitive touch controller */
ft5x06_ts: touchscreen@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_captouch>;
interrupt-parent = <&gpio5>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
touchscreen-size-x = <800>;
touchscreen-size-y = <480>;
touchscreen-inverted-x;
touchscreen-inverted-y;
};
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
};
};
/* Header */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* Header */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&usbotg1 {
disable-over-current;
extcon = <&extcon_usbotg1>, <&extcon_usbotg1>;
};
&usbotg2 {
dr_mode = "host";
vbus-supply = <®_usb_otg2_vbus>;
srp-disable;
hnp-disable;
adp-disable;
disable-over-current;
/delete-property/ usb-role-switch;
/*
* FIXME: having USB2 enabled hangs the boot just after:
* [ 1.943365] ci_hdrc ci_hdrc.1: EHCI Host Controller
* [ 1.948287] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
* [ 1.971006] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
* [ 1.977203] hub 1-0:1.0: USB hub found
* [ 1.980987] hub 1-0:1.0: 1 port detected
*/
status = "disabled";
};
&pinctrl_fec1 {
fsl,pins = <
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
/* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */
>;
};
&iomuxc {
pinctrl_captouch: captouchgrp {
fsl,pins = <
MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x16
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
>;
};
pinctrl_pca9534: pca9534grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16
>;
};
pinctrl_ptn5150: ptn5150grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
>;
};
pinctrl_reg_usb_otg2_vbus: regusbotg2vbusgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x16
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
>;
};
};
|
