summaryrefslogtreecommitdiffstats
path: root/bin/tests/system/addzone/tests.sh
diff options
context:
space:
mode:
Diffstat (limited to 'bin/tests/system/addzone/tests.sh')
-rwxr-xr-xbin/tests/system/addzone/tests.sh755
1 files changed, 755 insertions, 0 deletions
diff --git a/bin/tests/system/addzone/tests.sh b/bin/tests/system/addzone/tests.sh
new file mode 100755
index 0000000..b3e21c6
--- /dev/null
+++ b/bin/tests/system/addzone/tests.sh
@@ -0,0 +1,755 @@
+#!/bin/sh
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+SYSTEMTESTTOP=..
+. $SYSTEMTESTTOP/conf.sh
+
+DIGOPTS="+tcp +nosea +nostat +nocmd +norec +noques +noauth +noadd +nostats +dnssec -p ${PORT}"
+RNDCCMD="$RNDC -c $SYSTEMTESTTOP/common/rndc.conf -p ${CONTROLPORT} -s"
+
+check_zonestatus() (
+ $RNDCCMD "10.53.0.$1" zonestatus -redirect > "zonestatus.out.ns$1.$n" &&
+ grep "type: redirect" "zonestatus.out.ns$1.$n" > /dev/null &&
+ grep "serial: 1" "zonestatus.out.ns$1.$n" > /dev/null
+)
+
+status=0
+n=0
+
+echo_i "checking normally loaded zone ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.2 a.normal.example a > dig.out.ns2.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.$n > /dev/null || ret=1
+grep '^a.normal.example' dig.out.ns2.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+# When LMDB support is compiled in, this tests that migration from
+# NZF to NZD occurs during named startup
+echo_i "checking previously added zone ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.2 a.previous.example a > dig.out.ns2.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.$n > /dev/null || ret=1
+grep '^a.previous.example' dig.out.ns2.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+if $FEATURETEST --with-lmdb; then
+ echo_i "checking that existing NZF file was renamed after migration ($n)"
+ [ -e ns2/3bf305731dd26307.nzf~ ] || ret=1
+ n=`expr $n + 1`
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=`expr $status + $ret`
+fi
+
+echo_i "adding new zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone 'added.example { type primary; file "added.db"; };' 2>&1 | sed 's/^/I:ns2 /'
+_check_adding_new_zone () (
+ $DIG $DIGOPTS @10.53.0.2 a.added.example a > dig.out.ns2.$n &&
+ grep 'status: NOERROR' dig.out.ns2.$n > /dev/null &&
+ grep '^a.added.example' dig.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_adding_new_zone || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+nextpart ns2/named.run >/dev/null
+echo_i "checking addzone errors are logged correctly"
+ret=0
+$RNDCCMD 10.53.0.2 addzone bad.example '{ type mister; };' 2>&1 | grep 'unexpected token' > /dev/null 2>&1 || ret=1
+wait_for_log_peek 20 "addzone: 'mister' unexpected" ns2/named.run || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+nextpart ns2/named.run >/dev/null
+echo_i "checking modzone errors are logged correctly"
+ret=0
+$RNDCCMD 10.53.0.2 modzone added.example '{ type mister; };' 2>&1 | grep 'unexpected token' > /dev/null 2>&1 || ret=1
+wait_for_log_peek 20 "modzone: 'mister' unexpected" ns2/named.run || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "adding a zone that requires quotes ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone '"32/1.0.0.127-in-addr.added.example" {
+check-names ignore; type primary; file "added.db"; };' 2>&1 | sed 's/^/I:ns2 /'
+_check_zone_that_requires_quotes() (
+ $DIG $DIGOPTS @10.53.0.2 "a.32/1.0.0.127-in-addr.added.example" a > dig.out.ns2.$n &&
+ grep 'status: NOERROR' dig.out.ns2.$n > /dev/null &&
+ grep '^a.32/1.0.0.127-in-addr.added.example' dig.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_zone_that_requires_quotes || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "adding a zone with a quote in the name ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone '"foo\"bar.example" { check-names ignore; type primary; file "added.db"; };' 2>&1 | sed 's/^/I:ns2 /'
+_check_zone_with_a_quote() (
+ $DIG $DIGOPTS @10.53.0.2 "a.foo\"bar.example" a > dig.out.ns2.$n &&
+ grep 'status: NOERROR' dig.out.ns2.$n > /dev/null &&
+ grep '^a.foo\\"bar.example' dig.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_zone_with_a_quote || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "adding new zone with missing file ($n)"
+ret=0
+$DIG $DIGOPTS +all @10.53.0.2 a.missing.example a > dig.out.ns2.pre.$n || ret=1
+grep "status: REFUSED" dig.out.ns2.pre.$n > /dev/null || ret=1
+$RNDCCMD 10.53.0.2 addzone 'missing.example { type primary; file "missing.db"; };' 2> rndc.out.ns2.$n
+grep "file not found" rndc.out.ns2.$n > /dev/null || ret=1
+$DIG $DIGOPTS +all @10.53.0.2 a.missing.example a > dig.out.ns2.post.$n || ret=1
+grep "status: REFUSED" dig.out.ns2.post.$n > /dev/null || ret=1
+digcomp dig.out.ns2.pre.$n dig.out.ns2.post.$n || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+if ! $FEATURETEST --with-lmdb; then
+ echo_i "verifying no comments in NZF file ($n)"
+ ret=0
+ hcount=`grep "^# New zone file for view: _default" ns2/3bf305731dd26307.nzf | wc -l`
+ [ $hcount -eq 0 ] || ret=1
+ n=`expr $n + 1`
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=`expr $status + $ret`
+fi
+
+echo_i "checking rndc showzone with previously added zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 showzone previous.example > rndc.out.ns2.$n
+expected='zone "previous.example" { type primary; file "previous.db"; };'
+[ "`cat rndc.out.ns2.$n`" = "$expected" ] || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+if $FEATURETEST --with-lmdb; then
+ echo_i "checking zone is present in NZD ($n)"
+ ret=0
+ $NZD2NZF ns2/_default.nzd | grep previous.example > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=`expr $status + $ret`
+fi
+
+echo_i "deleting previously added zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 delzone previous.example 2>&1 | sed 's/^/I:ns2 /'
+_check_deleting_previously_added_zone() (
+ $DIG $DIGOPTS @10.53.0.2 a.previous.example a > dig.out.ns2.$n &&
+ grep 'status: REFUSED' dig.out.ns2.$n > /dev/null &&
+ ! grep '^a.previous.example' dig.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_deleting_previously_added_zone || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+check_nzd2nzf() (
+ $NZD2NZF ns2/_default.nzd > nzd2nzf.out.$n &&
+ ! grep previous.example nzd2nzf.out.$n > /dev/null
+)
+
+if $FEATURETEST --with-lmdb; then
+ echo_i "checking zone was deleted from NZD ($n)"
+ retry_quiet 10 check_nzd2nzf || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=`expr $status + $ret`
+fi
+
+if ! $FEATURETEST --with-lmdb; then
+ echo_i "checking NZF file now has comment ($n)"
+ ret=0
+ hcount=`grep "^# New zone file for view: _default" ns2/3bf305731dd26307.nzf | wc -l`
+ [ $hcount -eq 1 ] || ret=1
+ n=`expr $n + 1`
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=`expr $status + $ret`
+fi
+
+echo_i "deleting newly added zone added.example ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 delzone added.example 2>&1 | sed 's/^/I:ns2 /'
+_check_deleting_newly_added_zone() (
+ $DIG $DIGOPTS @10.53.0.2 a.added.example a > dig.out.ns2.$n &&
+ grep 'status: REFUSED' dig.out.ns2.$n > /dev/null &&
+ ! grep '^a.added.example' dig.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_deleting_newly_added_zone || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "deleting newly added zone with escaped quote ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 delzone "foo\\\"bar.example" 2>&1 | sed 's/^/I:ns2 /'
+_check_deleting_newly_added_zone_quote() (
+ $DIG $DIGOPTS @10.53.0.2 "a.foo\"bar.example" a > dig.out.ns2.$n &&
+ grep 'status: REFUSED' dig.out.ns2.$n > /dev/null &&
+ ! grep "^a.foo\"bar.example" dig.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_deleting_newly_added_zone_quote || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "checking rndc showzone with a normally-loaded zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 showzone normal.example > rndc.out.ns2.$n
+expected='zone "normal.example" { type primary; file "normal.db"; };'
+[ "`cat rndc.out.ns2.$n`" = "$expected" ] || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "checking rndc showzone with a normally-loaded zone with trailing dot ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 showzone finaldot.example > rndc.out.ns2.$n
+expected='zone "finaldot.example." { type primary; file "normal.db"; };'
+[ "`cat rndc.out.ns2.$n`" = "$expected" ] || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "checking rndc showzone with a normally-loaded redirect zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.1 showzone -redirect > rndc.out.ns1.$n
+expected='zone "." { type redirect; file "redirect.db"; };'
+[ "`cat rndc.out.ns1.$n`" = "$expected" ] || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "checking rndc zonestatus with a normally-loaded redirect zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.1 zonestatus -redirect > rndc.out.ns1.$n
+grep "type: redirect" rndc.out.ns1.$n > /dev/null || ret=1
+grep "serial: 0" rndc.out.ns1.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "checking rndc reload with a normally-loaded redirect zone ($n)"
+ret=0
+sleep 1
+cp -f ns1/redirect.db.2 ns1/redirect.db
+$RNDCCMD 10.53.0.1 reload -redirect > rndc.out.ns1.$n
+retry_quiet 5 check_zonestatus 1 || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "delete a normally-loaded zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 delzone normal.example > rndc.out.ns2.$n 2>&1
+grep "is no longer active and will be deleted" rndc.out.ns2.$n > /dev/null || ret=11
+grep "To keep it from returning when the server is restarted" rndc.out.ns2.$n > /dev/null || ret=1
+grep "must also be removed from named.conf." rndc.out.ns2.$n > /dev/null || ret=1
+_check_delete_normally_loaded_zone() (
+ $DIG $DIGOPTS @10.53.0.2 a.normal.example a > dig.out.ns2.$n &&
+ grep 'status: REFUSED' dig.out.ns2.$n > /dev/null
+)
+retry_quiet 5 _check_delete_normally_loaded_zone || ret=1
+
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "attempting to add primary zone with inline signing ($n)"
+$RNDCCMD 10.53.0.2 addzone 'inline.example { type primary; file "inline.db"; inline-signing yes; };' 2>&1 | sed 's/^/I:ns2 /'
+_check_add_primary_zone_with_inline() (
+ $DIG $DIGOPTS @10.53.0.2 a.inline.example a > dig.out.ns2.$n &&
+ grep 'status: NOERROR' dig.out.ns2.$n > /dev/null &&
+ grep '^a.inline.example' dig.out.ns2.$n > /dev/null
+)
+retry_quiet 5 _check_add_primary_zone_with_inline || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "attempting to add primary zone with inline signing and missing file ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone 'inlinemissing.example { type primary; file "missing.db"; inline-signing yes; };' 2> rndc.out.ns2.$n
+grep "file not found" rndc.out.ns2.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "attempting to add secondary zone with inline signing ($n)"
+$RNDCCMD 10.53.0.2 addzone 'inlinesec.example { type secondary; primaries { 10.53.0.1; }; file "inlinesec.bk"; inline-signing yes; };' 2>&1 | sed 's/^/I:ns2 /'
+_check_add_secondary_with_inline() (
+ $DIG $DIGOPTS @10.53.0.2 a.inlinesec.example a > dig.out.ns2.$n &&
+ grep 'status: NOERROR' dig.out.ns2.$n > /dev/null &&
+ grep '^a.inlinesec.example' dig.out.ns2.$n > /dev/null
+)
+retry_quiet 5 _check_add_secondary_with_inline || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "attempting to delete secondary zone with inline signing ($n)"
+ret=0
+retry_quiet 10 test -f ns2/inlinesec.bk.signed -a -f ns2/inlinesec.bk || ret=1
+$RNDCCMD 10.53.0.2 delzone inlinesec.example > rndc.out2.test$n 2>&1 || ret=1
+test -f inlinesec.bk ||
+grep '^inlinesec.bk$' rndc.out2.test$n > /dev/null || {
+ echo_i "failed to report inlinesec.bk"; ret=1;
+}
+test ! -f inlinesec.bk.signed ||
+grep '^inlinesec.bk.signed$' rndc.out2.test$n > /dev/null || {
+ echo_i "failed to report inlinesec.bk.signed"; ret=1;
+}
+n=`expr $n + 1`
+status=`expr $status + $ret`
+
+echo_i "restoring secondary zone with inline signing ($n)"
+$RNDCCMD 10.53.0.2 addzone 'inlinesec.example { type secondary; primaries { 10.53.0.1; }; file "inlinesec.bk"; inline-signing yes; };' 2>&1 | sed 's/^/I:ns2 /'
+_check_restoring_secondary_with_inline() (
+ $DIG $DIGOPTS @10.53.0.2 a.inlinesec.example a > dig.out.ns2.$n &&
+ grep 'status: NOERROR' dig.out.ns2.$n > /dev/null &&
+ grep '^a.inlinesec.example' dig.out.ns2.$n > /dev/null
+)
+retry_quiet 5 _check_restoring_secondary_with_inline || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "deleting secondary zone with automatic zone file removal ($n)"
+ret=0
+retry_quiet 10 test -f ns2/inlinesec.bk.signed -a -f ns2/inlinesec.bk || ret=1
+$RNDCCMD 10.53.0.2 delzone -clean inlinesec.example > /dev/null 2>&1
+retry_quiet 10 test ! -f ns2/inlinesec.bk.signed -a ! -f ns2/inlinesec.bk
+n=`expr $n + 1`
+status=`expr $status + $ret`
+
+echo_i "modifying zone configuration ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone 'mod.example { type primary; file "added.db"; };' 2>&1 | sed 's/^/ns2 /' | cat_i
+$DIG +norec $DIGOPTS @10.53.0.2 mod.example ns > dig.out.ns2.1.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.1.$n > /dev/null || ret=1
+$RNDCCMD 10.53.0.2 modzone 'mod.example { type primary; file "added.db"; allow-query { none; }; };' 2>&1 | sed 's/^/ns2 /' | cat_i
+$DIG +norec $DIGOPTS @10.53.0.2 mod.example ns > dig.out.ns2.2.$n || ret=1
+$RNDCCMD 10.53.0.2 showzone mod.example | grep 'allow-query { "none"; };' > /dev/null 2>&1 || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that adding a 'stub' zone works ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone 'stub.example { type stub; primaries { 1.2.3.4; }; file "stub.example.bk"; };' > rndc.out.ns2.$n 2>&1 || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that adding a 'static-stub' zone works ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone 'static-stub.example { type static-stub; server-addresses { 1.2.3.4; }; };' > rndc.out.ns2.$n 2>&1 || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that adding a 'primary redirect' zone works ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone '"." { type redirect; file "redirect.db"; };' > rndc.out.ns2.$n 2>&1 || ret=1
+_check_add_primary_redirect() (
+ $RNDCCMD 10.53.0.2 showzone -redirect > showzone.out.ns2.$n 2>&1 &&
+ grep "type redirect;" showzone.out.ns2.$n > /dev/null &&
+ $RNDCCMD 10.53.0.2 zonestatus -redirect > zonestatus.out.ns2.$n 2>&1 &&
+ grep "type: redirect" zonestatus.out.ns2.$n > /dev/null &&
+ grep "serial: 0" zonestatus.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_add_primary_redirect || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that reloading a added 'primary redirect' zone works ($n)"
+ret=0
+sleep 1
+cp -f ns2/redirect.db.2 ns2/redirect.db
+$RNDCCMD 10.53.0.2 reload -redirect > rndc.out.ns2.$n
+retry_quiet 10 check_zonestatus 2 || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that retransfer of a added 'primary redirect' zone fails ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 retransfer -redirect > rndc.out.ns2.$n 2>&1 && ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that deleting a 'primary redirect' zone works ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 delzone -redirect > rndc.out.ns2.$n 2>&1 || ret=1
+_check_deleting_primary_redirect() (
+ $RNDCCMD 10.53.0.2 showzone -redirect > showzone.out.ns2.$n 2>&1 || true
+ grep 'not found' showzone.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_deleting_primary_redirect || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that adding a 'secondary redirect' zone works ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone '"." { type redirect; primaries { 10.53.0.3;}; file "redirect.bk"; };' > rndc.out.ns2.$n 2>&1 || ret=1
+_check_adding_secondary_redirect() (
+ $RNDCCMD 10.53.0.2 showzone -redirect > showzone.out.ns2.$n 2>&1 &&
+ grep "type redirect;" showzone.out.ns2.$n > /dev/null &&
+ $RNDCCMD 10.53.0.2 zonestatus -redirect > zonestatus.out.ns2.$n 2>&1 &&
+ grep "type: redirect" zonestatus.out.ns2.$n > /dev/null &&
+ grep "serial: 0" zonestatus.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_adding_secondary_redirect || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that retransfering a added 'secondary redirect' zone works ($n)"
+ret=0
+cp -f ns3/redirect.db.2 ns3/redirect.db
+$RNDCCMD 10.53.0.3 reload . > showzone.out.ns3.$n 2>&1 || ret=1
+_check_retransfering_secondary_redirect() (
+ $RNDCCMD 10.53.0.2 retransfer -redirect > rndc.out.ns2.$n 2>&1 &&
+ $RNDCCMD 10.53.0.2 zonestatus -redirect > zonestatus.out.ns2.$n 2>&1 &&
+ grep "type: redirect" zonestatus.out.ns2.$n > /dev/null &&
+ grep "serial: 1" zonestatus.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_retransfering_secondary_redirect || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that deleting a 'secondary redirect' zone works ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 delzone -redirect > rndc.out.ns2.$n 2>&1 || ret=1
+_check_deleting_secondary_redirect() (
+ $RNDCCMD 10.53.0.2 showzone -redirect > showzone.out.ns2.$n 2>&1 || true
+ grep 'not found' showzone.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_deleting_secondary_redirect || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that zone type 'hint' is properly rejected ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone '"." { type hint; file "hints.db"; };' > rndc.out.ns2.$n 2>&1 && ret=1
+grep "zones not supported by addzone" rndc.out.ns2.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that zone type 'forward' is properly rejected ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone 'forward.example { type forward; forwarders { 1.2.3.4; }; forward only; };' > rndc.out.ns2.$n 2>&1 && ret=1
+grep "zones not supported by addzone" rndc.out.ns2.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that zone type 'delegation-only' is properly rejected ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone 'delegation-only.example { type delegation-only; };' > rndc.out.ns2.$n 2>&1 && ret=1
+grep "zones not supported by addzone" rndc.out.ns2.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check that 'in-view' zones are properly rejected ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone 'in-view.example { in-view "_default"; };' > rndc.out.ns2.$n 2>&1 && ret=1
+grep "zones not supported by addzone" rndc.out.ns2.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "reconfiguring server with multiple views"
+rm -f ns2/named.conf
+copy_setports ns2/named2.conf.in ns2/named.conf
+rndc_reconfig ns2 10.53.0.2
+
+echo_i "adding new zone to external view ($n)"
+# NOTE: The internal view has "recursion yes" set, and so queries for
+# nonexistent zones should return NOERROR. The external view is
+# "recursion no", so queries for nonexistent zones should return
+# REFUSED. This behavior should be the same regardless of whether
+# the zone does not exist because a) it has not yet been loaded, b)
+# it failed to load, or c) it has been deleted.
+ret=0
+$DIG +norec $DIGOPTS @10.53.0.2 -b 10.53.0.2 a.added.example a > dig.out.ns2.intpre.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.intpre.$n > /dev/null || ret=1
+$DIG +norec $DIGOPTS @10.53.0.4 -b 10.53.0.4 a.added.example a > dig.out.ns2.extpre.$n || ret=1
+grep 'status: REFUSED' dig.out.ns2.extpre.$n > /dev/null || ret=1
+$RNDCCMD 10.53.0.2 addzone 'added.example in external { type primary; file "added.db"; };' 2>&1 | sed 's/^/I:ns2 /'
+$DIG +norec $DIGOPTS @10.53.0.2 -b 10.53.0.2 a.added.example a > dig.out.ns2.int.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.int.$n > /dev/null || ret=1
+$DIG +norec $DIGOPTS @10.53.0.4 -b 10.53.0.4 a.added.example a > dig.out.ns2.ext.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.ext.$n > /dev/null || ret=1
+grep '^a.added.example' dig.out.ns2.ext.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+if ! $FEATURETEST --with-lmdb; then
+ echo_i "checking new NZF file has comment ($n)"
+ ret=0
+ hcount=`grep "^# New zone file for view: external" ns2/external.nzf | wc -l`
+ [ $hcount -eq 1 ] || ret=1
+ n=`expr $n + 1`
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=`expr $status + $ret`
+fi
+
+if $FEATURETEST --with-lmdb; then
+ echo_i "verifying added.example in external view created an external.nzd DB ($n)"
+ ret=0
+ [ -e ns2/external.nzd ] || ret=1
+ n=`expr $n + 1`
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=`expr $status + $ret`
+fi
+
+echo_i "checking rndc reload causes named to reload the external view's new zone config ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 reload 2>&1 | sed 's/^/ns2 /' | cat_i
+_check_rndc_reload_external_view_config() (
+ $DIG +norec $DIGOPTS @10.53.0.2 -b 10.53.0.2 a.added.example a > dig.out.ns2.int.$n &&
+ grep 'status: NOERROR' dig.out.ns2.int.$n > /dev/null &&
+ $DIG +norec $DIGOPTS @10.53.0.4 -b 10.53.0.4 a.added.example a > dig.out.ns2.ext.$n &&
+ grep 'status: NOERROR' dig.out.ns2.ext.$n > /dev/null &&
+ grep '^a.added.example' dig.out.ns2.ext.$n > /dev/null
+)
+retry_quiet 10 _check_rndc_reload_external_view_config || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "checking rndc showzone with newly added zone ($n)"
+_check_rndc_showzone_newly_added() (
+ if ! $FEATURETEST --with-lmdb; then
+ expected='zone "added.example" in external { type primary; file "added.db"; };'
+ else
+ expected='zone "added.example" { type primary; file "added.db"; };'
+ fi
+ $RNDCCMD 10.53.0.2 showzone added.example in external > rndc.out.ns2.$n 2>/dev/null &&
+ [ "`cat rndc.out.ns2.$n`" = "$expected" ]
+)
+retry_quiet 10 _check_rndc_showzone_newly_added || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "deleting newly added zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 delzone 'added.example in external' 2>&1 | sed 's/^/I:ns2 /'
+_check_deleting_newly_added_zone() (
+ $DIG $DIGOPTS @10.53.0.4 -b 10.53.0.4 a.added.example a > dig.out.ns2.$n &&
+ grep 'status: REFUSED' dig.out.ns2.$n > /dev/null &&
+ ! grep '^a.added.example' dig.out.ns2.$n > /dev/null
+)
+retry_quiet 10 _check_deleting_newly_added_zone || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "attempting to add zone to internal view ($n)"
+ret=0
+$DIG +norec $DIGOPTS @10.53.0.2 -b 10.53.0.2 a.added.example a > dig.out.ns2.pre.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.pre.$n > /dev/null || ret=1
+$RNDCCMD 10.53.0.2 addzone 'added.example in internal { type primary; file "added.db"; };' 2> rndc.out.ns2.$n
+grep "permission denied" rndc.out.ns2.$n > /dev/null || ret=1
+$DIG $DIGOPTS @10.53.0.2 -b 10.53.0.2 a.added.example a > dig.out.ns2.int.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.int.$n > /dev/null || ret=1
+$DIG $DIGOPTS @10.53.0.4 -b 10.53.0.4 a.added.example a > dig.out.ns2.ext.$n || ret=1
+grep 'status: REFUSED' dig.out.ns2.ext.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "attempting to delete a policy zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 delzone 'policy in internal' 2> rndc.out.ns2.$n >&1
+grep 'cannot be deleted' rndc.out.ns2.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "adding new zone again to external view ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 addzone 'added.example in external { type primary; file "added.db"; };' 2>&1 | sed 's/^/I:ns2 /'
+_check_adding_new_zone_again_external() (
+ $DIG +norec $DIGOPTS @10.53.0.2 -b 10.53.0.2 a.added.example a > dig.out.ns2.int.$n &&
+ grep 'status: NOERROR' dig.out.ns2.int.$n > /dev/null &&
+ $DIG +norec $DIGOPTS @10.53.0.4 -b 10.53.0.4 a.added.example a > dig.out.ns2.ext.$n &&
+ grep 'status: NOERROR' dig.out.ns2.ext.$n > /dev/null &&
+ grep '^a.added.example' dig.out.ns2.ext.$n > /dev/null
+)
+retry_quiet 10 _check_adding_new_zone_again_external || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "reconfiguring server with multiple views and new-zones-directory"
+rm -f ns2/named.conf
+copy_setports ns2/named3.conf.in ns2/named.conf
+rndc_reconfig ns2 10.53.0.2
+
+echo_i "checking new zone is still loaded after dir change ($n)"
+ret=0
+$DIG +norec $DIGOPTS @10.53.0.4 -b 10.53.0.4 a.added.example a > dig.out.ns2.ext.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.ext.$n > /dev/null || ret=1
+grep '^a.added.example' dig.out.ns2.ext.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "deleting newly added zone from external ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 delzone 'added.example in external' 2>&1 | sed 's/^/I:ns2 /'
+$DIG $DIGOPTS @10.53.0.4 -b 10.53.0.4 a.added.example a > dig.out.ns2.$n || ret=1
+grep 'status: REFUSED' dig.out.ns2.$n > /dev/null || ret=1
+grep '^a.added.example' dig.out.ns2.$n > /dev/null && ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "adding new zone to directory view ($n)"
+ret=0
+$DIG +norec $DIGOPTS @10.53.0.2 -b 10.53.0.2 a.added.example a > dig.out.ns2.intpre.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.intpre.$n > /dev/null || ret=1
+$DIG +norec $DIGOPTS @10.53.0.4 -b 10.53.0.4 a.added.example a > dig.out.ns2.extpre.$n || ret=1
+grep 'status: REFUSED' dig.out.ns2.extpre.$n > /dev/null || ret=1
+$DIG +norec $DIGOPTS @10.53.0.5 -b 10.53.0.5 a.added.example a > dig.out.ns2.dirpre.$n || ret=1
+grep 'status: REFUSED' dig.out.ns2.dirpre.$n > /dev/null || ret=1
+$RNDCCMD 10.53.0.2 addzone 'added.example in directory { type primary; file "added.db"; };' 2>&1 | sed 's/^/I:ns2 /'
+$DIG +norec $DIGOPTS @10.53.0.2 -b 10.53.0.2 a.added.example a > dig.out.ns2.int.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.int.$n > /dev/null || ret=1
+$DIG +norec $DIGOPTS @10.53.0.4 -b 10.53.0.4 a.added.example a > dig.out.ns2.ext.$n || ret=1
+grep 'status: REFUSED' dig.out.ns2.ext.$n > /dev/null || ret=1
+$DIG +norec $DIGOPTS @10.53.0.5 -b 10.53.0.5 a.added.example a > dig.out.ns2.dir.$n || ret=1
+grep 'status: NOERROR' dig.out.ns2.dir.$n > /dev/null || ret=1
+grep '^a.added.example' dig.out.ns2.dir.$n > /dev/null || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+if $FEATURETEST --with-lmdb; then
+ echo_i "checking NZD file was created in new-zones-directory ($n)"
+ expect=ns2/new-zones/directory.nzd
+else
+ echo_i "checking NZF file was created in new-zones-directory ($n)"
+ expect=ns2/new-zones/directory.nzf
+fi
+$RNDCCMD 10.53.0.2 sync 'added.example IN directory' 2>&1 | sed 's/^/I:ns2 /'
+sleep 2
+[ -e "$expect" ] || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "deleting newly added zone from directory ($n)"
+ret=0
+$RNDCCMD 10.53.0.2 delzone 'added.example in directory' 2>&1 | sed 's/^/I:ns2 /'
+$DIG $DIGOPTS @10.53.0.5 -b 10.53.0.5 a.added.example a > dig.out.ns2.$n || ret=1
+grep 'status: REFUSED' dig.out.ns2.$n > /dev/null || ret=1
+grep '^a.added.example' dig.out.ns2.$n > /dev/null && ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "ensure the configuration context is cleaned up correctly ($n)"
+ret=0
+rndc_reconfig ns2 10.53.0.2
+$RNDCCMD 10.53.0.2 status > /dev/null 2>&1 || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "check delzone after reconfig failure ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 addzone 'inlinesec.example. IN { type secondary; file "inlinesec.db"; masterfile-format text; primaries { test; }; };' > /dev/null 2>&1 || ret=1
+copy_setports ns3/named2.conf.in ns3/named.conf
+rndc_reconfig ns3 10.53.0.3
+$RNDCCMD 10.53.0.3 delzone inlinesec.example > /dev/null 2>&1 || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+if ! $FEATURETEST --with-lmdb
+then
+ echo_i "check that addzone is fully reversed on failure (--with-lmdb=no) ($n)"
+ ret=0
+ $RNDCCMD 10.53.0.3 addzone "test1.baz" '{ type primary; file "e.db"; };' > /dev/null 2>&1 || ret=1
+ $RNDCCMD 10.53.0.3 addzone "test2.baz" '{ type primary; file "dne.db"; };' > /dev/null 2>&1 && ret=1
+ $RNDCCMD 10.53.0.3 addzone "test3.baz" '{ type primary; file "e.db"; };' > /dev/null 2>&1 || ret=1
+ $RNDCCMD 10.53.0.3 delzone "test3.baz" > /dev/null 2>&1 || ret=1
+ grep test2.baz ns3/_default.nzf > /dev/null && ret=1
+ n=`expr $n + 1`
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=`expr $status + $ret`
+fi
+
+_check_version_bind() (
+ $DIG $DIGOPTS @10.53.0.3 version.bind txt ch > dig.out.test$n &&
+ grep "status: NOERROR" dig.out.test$n > /dev/null
+)
+
+echo_i "check that named restarts with multiple added zones ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 addzone "test4.baz" '{ type primary; file "e.db"; };' > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 addzone "test5.baz" '{ type primary; file "e.db"; };' > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 addzone '"test/.baz"' '{ type primary; check-names ignore; file "e.db"; };' > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 addzone '"test\".baz"' '{ type primary; check-names ignore; file "e.db"; };' > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 addzone '"test\\.baz"' '{ type primary; check-names ignore; file "e.db"; };' > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 addzone '"test\032.baz"' '{ type primary; check-names ignore; file "e.db"; };' > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 addzone '"test\010.baz"' '{ type primary; check-names ignore; file "e.db"; };' > /dev/null 2>&1 || ret=1
+stop_server ns3
+start_server --noclean --restart --port ${PORT} ns3 || ret=1
+retry_quiet 10 _check_version_bind || ret=1
+$DIG $DIGOPTS @10.53.0.3 SOA "test4.baz" > dig.out.1.test$n || ret=1
+grep "status: NOERROR" dig.out.1.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.1.test$n > /dev/null || ret=1
+$DIG $DIGOPTS @10.53.0.3 SOA "test5.baz" > dig.out.2.test$n || ret=1
+grep "status: NOERROR" dig.out.2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.2.test$n > /dev/null || ret=1
+$DIG $DIGOPTS @10.53.0.3 SOA 'test/.baz' > dig.out.3.test$n || ret=1
+grep "status: NOERROR" dig.out.3.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.3.test$n > /dev/null || ret=1
+$DIG $DIGOPTS @10.53.0.3 SOA 'test\\.baz' > dig.out.4.test$n || ret=1
+grep "status: NOERROR" dig.out.4.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.4.test$n > /dev/null || ret=1
+$DIG $DIGOPTS @10.53.0.3 SOA 'test\032.baz' > dig.out.5.test$n || ret=1
+grep "status: NOERROR" dig.out.5.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.5.test$n > /dev/null || ret=1
+$DIG $DIGOPTS @10.53.0.3 SOA 'test\010.baz' > dig.out.6.test$n || ret=1
+grep "status: NOERROR" dig.out.6.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.6.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+n=`expr $n + 1`
+
+echo_i "exit status: $status"
+[ $status -eq 0 ] || exit 1